Scribd
Upload
747 views3 pages

5 2 2

The document discusses tagging tools used in computer systems servicing. Tagging is important to identify tools' information like name, date of purchase, and status. Tools are given red tags if out of service and the issues are written on the tag. Red tagged tools are stored separately. Green tags are used for tools in good condition and their information is filled out before use. After use, tools are cleaned and stored with the green tags in the toolbox. A tool checklist is also filled out.

Uploaded by

api-196541959
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
747 views3 pages

5 2 2

The document discusses tagging tools used in computer systems servicing. Tagging is important to identify tools' information like name, date of purchase, and status. Tools are given red tags if out of service and the issues are written on the tag. Red tagged tools are stored separately. Green tags are used for tools in good condition and their information is filled out before use. After use, tools are cleaned and stored with the green tags in the toolbox. A tool checklist is also filled out.

Uploaded by

api-196541959
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Computer Systems Servicing

Tubigon West Central High School

INFORMATION SHEET LESSON 5 2.2


Identify and mark unsafe or faulty tools for repair according to standard
company procedure
Tags used for labelling the hand tools used in computer systems servicing.
Why is tagging important?
Tagging (labelling) is important since it enables the user to know the
important information of a particular hand tool. It may consists of the
name of the tool, date of purchase, SKU, tool code, tool status and others
depending on the companys format.
Steps in tagging hand tools:
1. Check if the hand tools are in good condition or not. For out of service
hand tools, put the RED tag on them and write the reason/s why they
are out of service. Fill up the necessary information found on the RED
tag.
2. For hand tools with RED tags, place them in a separate tool box. Be
sure that you filled out the information on it.
3. For hand tools that are in good condition, place the GREEN tag. Fill out
the necessary information found in the green tag before using it.
4. After using the hand tools with GREEN tags, place them safely inside
the tool box. Be sure that you have cleaned them and they are properly
placed inside the tool box.
5. Fill out the TOOL Checklist after placing the tools inside the tool box.

Computer Systems Servicing


Tubigon West Central High School

TASK SHEET LESSON 5 2.2


Identify and mark unsafe or faulty tools for repair according to standard
company procedure
Steps in tagging hand tools:
1. Check if the hand tools are in good condition or not. For out of service
hand tools, put the RED tag on them and write the reason/s why they
are out of service. Fill up the necessary information found on the RED
tag.
2. For hand tools with RED tags, place them in a separate tool box. Be
sure that you filled out the information on it.
3. For hand tools that are in good condition, place the GREEN tag. Fill out
the necessary information found in the green tag before using it.
4. After using the hand tools with GREEN tags, place them safely inside
the tool box. Be sure that you have cleaned them and they are properly
placed inside the tool box.
5. Fill out the TOOL Checklist after placing the tools inside the tool box.

PERFORMANCE SHEET LESSON 5 2.2


Identify and mark unsafe or faulty tools for repair according to standard
company procedure
Check the appropriate box with regards to the condition of the hand tools
after using the hand tools.
CONDITION
HAND TOOLS
1. Flat screwdriver
2. Philips screw driver
3. Long nose plier

GOOD (GREEN
TAGS)

BAD (RED
TAGS)

Computer Systems Servicing


Tubigon West Central High School

4. Side- cutting plier


5. Torx screwdriver
6. Tweezers
7. Hex driver
8. Flashlight
9. Part retriever
10.

Magnifying glass

11.

Anti- static wrist strap

Prepared by:
RONALD REY S. RESABAL
Teacher II
TWCHS

You might also like