Scribd
Upload
4K views10 pages

Documents - Tips - Solidwize CSWP Sample Exam 1 Segment 2 PDF

This document contains a 9 question sample exam for the CSWP Core certification. It involves modifying several SolidWorks part files by: 1) Changing configurations, dimensions, and features to calculate part masses 2) Altering thickness, depths, and dimensions of features on shell structures 3) Modifying initial sketches and features to update part geometry and masses The questions require applying configurations, design tables, feature modifications, and mass property calculations within time limits to solve each multi-step problem.

Uploaded by

Rommel Leal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views10 pages

Documents - Tips - Solidwize CSWP Sample Exam 1 Segment 2 PDF

This document contains a 9 question sample exam for the CSWP Core certification. It involves modifying several SolidWorks part files by: 1) Changing configurations, dimensions, and features to calculate part masses 2) Altering thickness, depths, and dimensions of features on shell structures 3) Modifying initial sketches and features to update part geometry and masses The questions require applying configurations, design tables, feature modifications, and mass property calculations within time limits to solve each multi-step problem.

Uploaded by

Rommel Leal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

SolidWize

Online SolidWorks Training


CSWP Sample Exam 1 (2012)
Segment 2 of the CSWP Core
-This test is made up of a series of problems broken down into sets of questions. Each problem
set of questions comes with a description that outlines the problems to be solved for that set.
-This section contains 9 questions
-You should be able to complete all 9 questions within 40 minutes
-Consult answer key after completion of this section

Segment 2A- Configurations


Question 1-Existing Configurations
Unit System: MMGS (millimeter, gram, second)
Decimal Places: 2
-Open Wize2A_Start.sldprt (in the segment 2 folder)
How many existing configurations are there in the part?
a. 2
b. 3
c. 4
d. 5

Question 2- Active Configuration


Unit System: MMGS (millimeter, gram, second)
Decimal Places: 2
-Activate configuration C
What is the mass of the part (grams)?

______________

Question 3- New Configuration Z


Unit System: MMGS (millimeter, gram, second)
Decimal Places: 2
-Create a new configuration based on configuration B
-Create a through hole as indicated in the image below that will be suppressed in all other configurations except for D
and Z. (This feature will only be unsuppressed in configurations D and Z)
Note: This hole is coincident to the origin of the part
What is the mass of the configuration Z (grams)?
a.
b.
c.
d.

972.63
550.64
1438.90
1543.22

Question 4- Switch Configuration


Unit System: MMGS (millimeter, gram, second)
Decimal Places: 2
-Activate Configuration D
What is the mass of the configuration D (grams)?

_____________

Question 5- Design Table


Unit System: MMGS (millimeter, gram, second)
Decimal Places: 2
Material: Copper
Density: 8900 kg/m^3
-Create a design table using the Auto-Create options.
-Create a new configuration E by copying the row for configuration A and pasting a new row.
-Within the design table, assign the following dimensions to configuration E:
D1@sketch7=5
D2@sketch7=6
D3@sketch8=65
D4@sketch8=33
BoreDiameter@sketch5=28
What is the mass of the configuration E (grams)
____________

Segment 2B- Part Modifications


Question 6 Change Feature Depth
Unit System: MMGS (millimeter, gram, second)
Decimal Places: 2
-Open Wize2B_Shell_Start.sldprt (in the segment 2 folder)
-Make the proper change to the part as indicated below. (change from 1 to 2)

What is the mass of the modified part?

________

Question 7 Change Shell Thickness


Unit System: MMGS (millimeter, gram, second)
Decimal Places: 2
-Make the proper change to the part as indicated below. (change from 1 to 2)

-Only the shell thickness changes


What is the mass of the modified part?

____________

Question 8 Feature History


Unit System: MMGS (millimeter, gram, second)
Decimal Places: 2
-Make the proper change to the part as indicated below. (change from 1 to 2)

-Change shell thickness and part dimensions as shown


What is the mass of the modified part?

_________________

Question 9 More Changes/Lack of Creative Title


Unit System: MMGS (millimeter, gram, second)
Decimal Places: 2
-Make the proper change to the part as indicated below. (change from 1 to 2)
Hint: the initial sketch needs to be modified
(II) indicates Parallel

What is the mass of the modified part?


__________

You might also like