Scribd Logo
Upload

Welcome to Scribd!

  • 222 views

    91-Intruder Security System

    Uploaded by

    zul
    This diagram shows the wiring connections for an intruder security system project using an Arduino Uno. An ultrasonic sensor is connected to digital pins A1 and A2 to detect movement. Start and stop switches are connected to pins A3 and A4 to control the system. A buzzer and LED are connected to pins 8 and 9 to alert when motion is detected. A stepper motor is also wired to control an action during an alert.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    91-Intruder Security System

    Uploaded by

    zul
    222 views1 page
    This diagram shows the wiring connections for an intruder security system project using an Arduino Uno. An ultrasonic sensor is connected to digital pins A1 and A2 to detect movement. Start and stop switches are connected to pins A3 and A4 to control the system. A buzzer and LED are connected to pins 8 and 9 to alert when motion is detected. A stepper motor is also wired to control an action during an alert.

    Original Description:

    Systemk Security untuk projek elektronik

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This diagram shows the wiring connections for an intruder security system project using an Arduino Uno. An ultrasonic sensor is connected to digital pins A1 and A2 to detect movement. Start and stop switches are connected to pins A3 and A4 to control the system. A buzzer and LED are connected to pins 8 and 9 to alert when motion is detected. A stepper motor is also wired to control an action during an alert.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    222 views1 page

    91-Intruder Security System

    Uploaded by

    zul
    This diagram shows the wiring connections for an intruder security system project using an Arduino Uno. An ultrasonic sensor is connected to digital pins A1 and A2 to detect movement. Start and stop switches are connected to pins A3 and A4 to control the system. A buzzer and LED are connected to pins 8 and 9 to alert when motion is detected. A stepper motor is also wired to control an action during an alert.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    LCD

    Vcc
    Trig
    Echo
    Gnd
    ARDUINO PIN A1

    ARDUINO PIN A0

    STOP
    SWITCH

    ARDUINO PIN A5
    ARDUINO PIN A4
    ARDUINO PIN A3
    ARDUINO PIN A2

    START
    SWITCH

    HC-SR04

    ULTRASONIC

    16

    ARDUINO PIN 6
    ARDUINO PIN 7

    RESISTOR 470

    ARDUINO PIN 9
    ARDUINO PIN 8

    5v LED

    STEPPER
    MOTOR 12VDC

    BUZZER
    C

    ARDUINO

    www.arduino4u.com
    viSiT OuR wEbSiTe FoR MoRe PrOjEcT iDeA
    UI
    ARD

    PROJECT NO : 91
    TITLE :INTRUDER SECURITY SYS
    www.arduino4u.com

    A0
    A1
    A2
    A3
    A4
    A5

    RST
    3V3
    5V
    GND
    GND
    Vin

    ARDUINO PIN 2
    ARDUINO PIN 3
    ARDUINO PIN 4
    ARDUINO PIN 5

    IN7

    IN6

    IN5

    IN4

    IN3

    IN2

    IN1

    UNO

    ARDUINO UNO

    VCC
    GND

    RELAY MODULE

    7
    6
    5
    4
    3
    2
    1
    0

    AREF
    GND
    13
    12
    11
    10
    9
    8

    VCC
    GND
    IN
    .
    .

    STEPPER
    DRIVER

    You might also like