Scribd
Upload
202 views1 page

14-Rfid Speedtrap System

This diagram shows the wiring connections for an Arduino Uno-based RFID speed trap system project. It includes connections from an Arduino Uno to a 12V power adaptor, GSM modem, RFID reader module, LCD display, buzzer, and buttons. The Arduino pins are used to interface with these components to read RFID tags and detect speeds, then send alerts via GSM.

Uploaded by

zul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
202 views1 page

14-Rfid Speedtrap System

This diagram shows the wiring connections for an Arduino Uno-based RFID speed trap system project. It includes connections from an Arduino Uno to a 12V power adaptor, GSM modem, RFID reader module, LCD display, buzzer, and buttons. The Arduino pins are used to interface with these components to read RFID tags and detect speeds, then send alerts via GSM.

Uploaded by

zul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

12V ADAPTOR

SIMCARD

ARDUINO PIN 13
ARDUINO PIN 11
ARDUINO PIN 12

GSM
MODEM

GND

Vin(+)

5v
POWER
MODULE

DB9-2
DB9-3
GND
GND 5V

Vout(+)

GND
ARDUINO PIN 2
ARDUINO PIN 3

BUZZER

SDA
SCK
MOSI
MISO
RIQ
GND
RST
3.3V

RFID-RC522

START RFID
ARDUINO PIN 10

ARDUINO PIN 9

LCD

ARDUINO PIN 7

7
6
5
4
3
2
1
0

RST
3V3
5V
GND
GND
Vin

UNO

A0
A1
A2
A3
A4
A5

AREF
GND
13
12
11
10
9
8

ARDUINO PIN A4

ARDUINO PIN A5

ARDUINO PIN A3
ARDUINO PIN A2
ARDUINO PIN A1
ARDUINO PIN A0

ARDUINO

ARDUINO UNO

www.arduino4u.com
viSiT OuR wEbSiTe FoR MoRe PrOjEcT iDeA
UI

ARD

PROJECT NO : 14
TITLE RFID SPEED TRAP SYSTEM
www.arduino4u.com

RFID-RC522

END RFID
SDA
SCK
MOSI
MISO
RIQ
GND
RST
3.3V

16

You might also like