Scribd Logo
Upload

Welcome to Scribd!

  • 277 views

    ZF Transmission, Third and Fourth Clutches

    Uploaded by

    Jhonny Rodriguez
    This document provides a list of parts and their descriptions needed to repair the third and fourth clutches of a ZF transmission for a Case wheel loader. It includes hoses, seals, bolts, nuts, dowel pins, gears, bearings, washers, shims, and the transmission housing. The kit contains all the parts to replace the axle assembly for the third and fourth clutches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    ZF Transmission, Third and Fourth Clutches

    Uploaded by

    Jhonny Rodriguez
    277 views3 pages
    This document provides a list of parts and their descriptions needed to repair the third and fourth clutches of a ZF transmission for a Case wheel loader. It includes hoses, seals, bolts, nuts, dowel pins, gears, bearings, washers, shims, and the transmission housing. The kit contains all the parts to replace the axle assembly for the third and fourth clutches.

    Original Description:

    Zf Transmission%2c Third and Fourth Clutches

    Original Title

    Zf Transmission%2c Third and Fourth Clutches

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a list of parts and their descriptions needed to repair the third and fourth clutches of a ZF transmission for a Case wheel loader. It includes hoses, seals, bolts, nuts, dowel pins, gears, bearings, washers, shims, and the transmission housing. The kit contains all the parts to replace the axle assembly for the third and fourth clutches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    277 views3 pages

    ZF Transmission, Third and Fourth Clutches

    Uploaded by

    Jhonny Rodriguez
    This document provides a list of parts and their descriptions needed to repair the third and fourth clutches of a ZF transmission for a Case wheel loader. It includes hoses, seals, bolts, nuts, dowel pins, gears, bearings, washers, shims, and the transmission housing. The kit contains all the parts to replace the axle assembly for the third and fourth clutches.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Case Construction

    621 State Street


    [email protected], Wisconsin 53404
    866-542-2736 x1
    (W30) - CASE WHEEL LOADER > (6-56) - ZF TRANSMISSION, THIRD AND FOURTH CLUTCHES

    Case Construction
    621 State Street
    [email protected], Wisconsin 53404
    866-542-2736 x1
    (W30) - CASE WHEEL LOADER > (6-56) - ZF TRANSMISSION, THIRD AND FOURTH CLUTCHES
    Diag #

    Part #

    Name

    Description

    Qty

    L116979

    TRANSMISSION

    ASSEMBLY - ZF No. 4644-004-095, see


    Figures 6-36 through 6-60

    E135162

    HOSE

    - third and fourth clutches, 516 mm long

    E135038

    SEAL

    - oil, 16 mm ID x 22 mm OD x 1.5 mm

    E135089

    BOLT

    CONNECTOR - hose, hex head

    825-1408

    NUT,M8, Cl 8

    NUT,M8, Cl 8

    E135243

    KIT

    AXLE ASSEMBLY - third and fourth


    clutches

    NSS

    NOT SERVICED
    SEPARATELY

    AXLE - third and fourth clutches

    E135023

    DOWEL

    PIN - roll, 2.5 mm OD x 10 mm

    E135145

    RING,35.2mm ID x 38mm
    OD x 2mm Thk

    - piston, axle shaft

    E135223

    GASKET

    - axle

    Ref #8 - Used on early


    production units.

    Ref #8 - Used on early production units.

    Ref #8A - S300460 O-Ring Ref #8A - S300460 O-Ring used on later
    used on later units.
    units.

    1
    3

    E135084

    STUD

    - 8 mm - 1.25 x 18 mm

    10

    E135158

    CYLINDRICAL ROLLER
    BEARING - needle, 15.6 mm OD x 31mm 12
    BEARING,Needle, 15.6mm
    OD x 31mm L

    11

    E135152

    NEEDLE BEARING
    CAGE,45mm ID x 53mm
    OD x 27.8mm W

    BEARING - roller, 45 mm ID x 53mm OD


    x 27.8mm

    12

    E135275

    GEAR

    - third

    13

    E135121

    WASHER, THRUST

    WASHER - thrust,tabbed

    14

    NSS

    NOT SERVICED
    SEPARATELY

    CLUTCH PACK - third and fourth, see


    Figure 6-58 for components

    15

    E135122

    WASHER, THRUST

    WASHER - thrust, tabbed

    16

    E135263

    GEAR

    - fourth

    17

    E135147

    NEEDLE BEARING
    BEARING - roller, 35mm ID x 50.1mm OD 1
    CAGE,35mm ID x 50.1mm x 30.4mm
    OD x 30.4mm W

    18

    E135120

    WASHER

    - thrust, 35mm ID x 70mm OD x 1.5mm

    19

    E135203

    WASHER, THRUST

    WASHER - thrust, notched

    20

    E135097

    SHIM,35.1mm ID x 70mm
    OD x 0.2mm Thk

    (35.1 mm ID x 70 mm OD) 0.2mm Thk

    20

    E135098

    SHIM,0.4mm Thk

    (35.1 mm ID x 70 mm OD) 0.4mm Thk

    20

    E135099

    SHIM,0.6mm Thk

    (35.1 mm ID x 70 mm OD) 0.6mm Thk

    20

    E135100

    SHIM,35.1mm ID x 70mm
    OD x 0.8mm Thk

    (35.1 mm ID x 70 mm OD) 0.8mm Thk

    Diag #

    Part #

    Name

    Description

    Qty

    20

    E135101

    SHIM,1.0mm Thk

    (35.1 mm ID x 70 mm OD) 1.0mm Thk

    20

    E135102

    SHIM,1.2mm Thk

    (35.1 mm ID x 70 mm OD) 1.2mm Thk

    20

    E135103

    SHIM,1.4mm Thk

    (35.1 mm ID x 70 mm OD) 1.4mm Thk

    20

    E135104

    SHIM,1.6mm Thk

    (35.1 mm ID x 70 mm OD) 1.6mm Thk

    20

    E135105

    SHIM,1.8mm Thk

    (35.1 mm ID x 70 mm OD) 1.8mm Thk

    20

    E135106

    SHIM,2.0mm Thk

    (35.1 mm ID x 70 mm OD) 2.0mm Thk

    20

    E135107

    SHIM,2.2mm Thk

    (35.1 mm ID x 70 mm OD) 2.2mm Thk

    20

    E135108

    SHIM,2.4mm Thk

    (35.1 mm ID x 70 mm OD) 2.4mm Thk

    20

    E135109

    SHIM,2.6mm Thk

    (35.1 mm ID x 70 mm OD) 2.6mm Thk

    20

    E135110

    SHIM,2.8mm Thk

    (35.1 mm ID x 70 mm OD) 2.8mm Thk

    21

    E135249

    HOUSING

    - transmission

    You might also like