General Description: 13 March 2014 Product Data Sheet

TO
-92
BT149G
SCR
13 March 2014
Product data sheet
1. General description
Planar passivated Silicon Controlled Rectifier with sensitive gate in a SOT54 (TO-92)
plastic package. This SCR is designed to be interfaced directly to microcontrollers, logic
ICs and other low power gate trigger circuits.
2. Features and benefits
Enhanced voltage capability

Planar passivated for voltage ruggedness and reliability
Sensitive gate
Direct triggering from low power drivers and logic ICs
3. Applications
General purpose switching and phase control
4. Quick reference data

Table 1.
Quick reference data
Symbol
Parameter
VDRM
Conditions
Min
Typ
Max
Unit
repetitive peak offstate voltage
600
VRRM
repetitive peak reverse

voltage
600
ITSM
non-repetitive peak on- half sine wave; Tj(init) = 25 C;

state current
tp = 10 ms; Fig. 4; Fig. 5
IT(AV)
average on-state
current
half sine wave; Tlead 83 C; Fig. 1
0.5
IT(RMS)
RMS on-state current
half sine wave; Tlead 83 C; Fig. 2;
0.8
50
200
Fig. 3
Static characteristics
IGT
gate trigger current
VD = 12 V; IT = 10 mA; Tj = 25 C;
Fig. 7
Scan or click this QR code to view the latest information for this product
BT149G
NXP Semiconductors
SCR
5. Pinning information
Table 2.
Pinning information
Pin
Symbol Description
Simplified outline
cathode
gate
anode
Graphic symbol
A
K
G
sym037
321
TO-92 (SOT54)
6. Ordering information
Table 3.
Ordering information
Type number
BT149G
BT149G
Product data sheet
Package
Name
Description
Version
TO-92
plastic single-ended leaded (through hole) package; 3 leads
SOT54
All information provided in this document is subject to legal disclaimers.
13 March 2014
NXP Semiconductors N.V. 2014. All rights reserved
2 / 13
BT149G
NXP Semiconductors
SCR
7. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VDRM
Conditions
Min
Max
Unit
repetitive peak off-state voltage
600
VRRM
repetitive peak reverse voltage
600
IT(AV)
average on-state current
half sine wave; Tlead 83 C; Fig. 1
0.5
IT(RMS)
RMS on-state current
half sine wave; Tlead 83 C; Fig. 2;
0.8
Fig. 3
ITSM
non-repetitive peak on-state

current
half sine wave; Tj(init) = 25 C;

tp = 10 ms; Fig. 4; Fig. 5
half sine wave; Tj(init) = 25 C;
tp = 8.3 ms
I t
I t for fusing
tp = 10 ms; SIN
0.32
A s
dIT/dt
rate of rise of on-state current
IT = 2 A; IG = 10 mA; dIG/dt = 100 mA/
50
A/s
s
IGM
peak gate current
VRGM
peak reverse gate voltage
PGM
peak gate power
PG(AV)
average gate power
0.1
Tstg
storage temperature
-40
150
Tj
junction temperature
125
over any 20 ms period
001aab446
0.8
a = 1.57
Ptot
(W)
1.9
0.6
77
Tlead(max)
(C)
89
2.2
2.8
0.4
conduction
angle
(degrees)
form
factor
a
30
60
90
120
180
4
2.8
2.2
1.9
1.57
0.2
0.1
0.2
0.3
0.4
101
0.5
IT(AV) (A)
113
125
0.6
= conduction angle
a = form factor = IT(RMS) / IT(AV)
Fig. 1.
Total power dissipation as a function of average on-state current; maximum values
BT149G
Product data sheet
13 March 2014
3 / 13
BT149G
NXP Semiconductors
SCR
001aab449
001aab450
1
IT(RMS)
(A)
IT(RMS)
(A)
83 C
0.8
1.5
0.6
1
0.4
0.5
0.2
0
10-2
10-1
0
-50
1
10
surge duration (s)
f = 50 Hz; Tlead = 83 C
Fig. 2.
Fig. 3.
RMS on-state current as a function of surge

duration for sinusoidal currents
50
100
150
Tlead (C)
RMS on-state current as a function of lead

temperature; maximum values
001aab499
10
ITSM
(A)
8
4
IT
ITSM
t
tp
Tj(init) = 25 C max
102
10
number of cycles
103
f = 50 Hz
Fig. 4.
Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum
values
BT149G
Product data sheet
13 March 2014
4 / 13
BT149G
NXP Semiconductors
SCR
001aab497
103
IT
ITSM
(A)
ITSM
t
tp
Tj(init) = 25 C max
102
10
1
10-5
10-4
10-3
tp (s)
10-2
tp 10 ms
Fig. 5.
Non-repetitive peak on-state current as a function of pulse width for sinusoidal currents; maximum values
BT149G
Product data sheet
13 March 2014
5 / 13
BT149G
NXP Semiconductors
SCR
8. Thermal characteristics
Table 5.
Thermal characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
Rth(j-lead)
thermal resistance
from junction to lead
Fig. 6
60
K/W
Rth(j-a)
thermal resistance
from junction to
ambient
printed circuit board mounted: lead

length = 4 mm
150
K/W
001aab451
102
Zth(j-lead)
(K/W)
10
10-1
tp
10-2
10-5
Fig. 6.
10-4
10-3
10-2
10-1
tp (s)
10
Transient thermal impedance from junction to lead as a function of pulse width
BT149G
Product data sheet
13 March 2014
6 / 13
BT149G
NXP Semiconductors
SCR
9. Characteristics
Table 6.
Characteristics
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VD = 12 V; IT = 10 mA; Tj = 25 C;
50
200
mA
mA
Static characteristics
IGT
gate trigger current
Fig. 7
IL
latching current
VD = 12 V; IG = 0.5 mA; RGK = 1 k;

Tj = 25 C; Fig. 8
IH
holding current
VD = 12 V; RGK = 1 k; Tj = 25 C;
Fig. 9
VT
on-state voltage
IT = 1.2 A; Tj = 25 C; Fig. 10
1.25
1.7
VGT
gate trigger voltage
VD = 12 V; IT = 10 mA; Tj = 25 C;
0.5
0.8
0.2
0.3
Fig. 11
VD = 600 V; IT = 10 mA; Tj = 125 C;
Fig. 11
ID
off-state current
VD = 600 V; Tj = 125 C; RGK = 1 k
0.05
0.1
mA
IR
reverse current
VR = 600 V; Tj = 125 C; RGK = 1 k
0.05
0.1
mA
VDM = 402 V; Tj = 125 C; RGK = 1 k;
500
800
V/s
V/s
Dynamic characteristics
dVD/dt
rate of rise of off-state

voltage
(VDM = 67% of VDRM); exponential

waveform; Fig. 12
VDM = 402 V; Tj = 125 C; (VDM = 67%
of VDRM); exponential waveform; gate
open circuit; Fig. 12
tgt
gate-controlled turn-on ITM = 2 A; VD = 600 V; IG = 10 mA; dIG/

time
dt = 0.1 A/s; Tj = 25 C
tq
commutated turn-off
time
100
VDM = 402 V; Tj = 125 C; ITM = 1.6 A;

VR = 35 V; (dIT/dt)M = 30 A/s; dVD/
dt = 2 V/s; RGK = 1 k; (VDM = 67% of
VDRM)
BT149G
Product data sheet
13 March 2014
7 / 13
BT149G
NXP Semiconductors
SCR
001aab502
3
IGT
IGT(25C)
IL
IL(25C)
0
-50
Fig. 7.
001aab503
50
100
Tj (C)
0
-50
150
Normalized gate trigger current as a function of

Fig. 8.
001aab504
50
100
Tj (C)
150
RGK = 1 k
Normalized latching current as a function of
001aab454
5
IT
(A)
IH
IH(25C)
2
2
1
1
0
-50
50
100
Tj (C)
0
0.4
150
RGK = 1 k
Fig. 9.
(1)
(2)
1.2
(3)
VT (V)
2.8
Vo = 1.067 V; Rs = 0.187
(1) Tj = 125 C; typical values
(2) Tj = 125 C; maximum values
(3) Tj = 25 C; maximum values
Normalized holding current as a function of

Fig. 10. On-state current as a function of on-state

voltage
BT149G
Product data sheet
13 March 2014
8 / 13
BT149G
NXP Semiconductors
SCR
001aab501
1.6
001aab507
104
VGT
VGT(25C)
dVD/dt
(V/s)
1.2
103
0.8
102
(1)
(2)
0.4
-50
50
100
Tj (C)
10
150
50
100
Tj (C)
150
(1) RGK = 1 k
Fig. 11. Normalized gate trigger voltage as a function of

(2) gate open circuit

Fig. 12. Critical rate of rise of off-state voltage as a
function of junction temperature; typical values
BT149G
Product data sheet
13 March 2014
9 / 13
BT149G
NXP Semiconductors
SCR
10. Package outline

Plastic single-ended leaded (through hole) package; 3 leads
SOT54
E
d
L
b
1
e1
3
b1
L1
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)

UNIT
b1
e1
L1(1)
mm
5.2
5.0
0.48
0.40
0.66
0.55
0.45
0.38
4.8
4.4
1.7
1.4
4.2
3.6
2.54
1.27
14.5
12.7
2.5
max.
Note
1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities.
OUTLINE
VERSION
SOT54
REFERENCES
IEC
JEDEC
JEITA
TO-92
SC-43A
EUROPEAN
PROJECTION
ISSUE DATE
04-06-28
04-11-16
Fig. 13. Package outline TO-92 (SOT54)

BT149G
Product data sheet
13 March 2014
10 / 13
BT149G
NXP Semiconductors
SCR
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation lost profits, lost savings, business interruption, costs related to the removal
or replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
11. Legal information

11.1 Data sheet status
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Document
status [1][2]
Product
status [3]
Objective
[short] data
sheet
Development This document contains data from

the objective specification for product
development.
Preliminary
[short] data
sheet
Qualification
This document contains data from the

preliminary specification.
Product
[short] data
sheet
Production
This document contains the product

specification.
[1]
[2]
[3]
Definition
Right to make changes NXP Semiconductors reserves the right to

make changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Please consult the most recently issued document before initiating or

completing a design.
The term 'short data sheet' is explained in section "Definitions".
The product status of device(s) described in this document may have
changed since this document was published and may differ in case of
multiple devices. The latest product status information is available on
the Internet at URL http://www.nxp.com.
11.2 Definitions
Preview The document is a preview version only. The document is still
subject to formal approval, which may result in modifications or additions.
NXP Semiconductors does not give any representations or warranties as to
the accuracy or completeness of information included herein and shall have
no liability for the consequences of use of such information.
Draft The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences
of use of such information.
Short data sheet A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full data sheet, which is available on request via the local NXP
Semiconductors sales office. In case of any inconsistency or conflict with the
short data sheet, the full data sheet shall prevail.
Product specification The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product
is deemed to offer functions and qualities beyond those described in the
Product data sheet.
11.3 Disclaimers
Limited warranty and liability Information in this document is believed
to be accurate and reliable. However, NXP Semiconductors does not give
any representations or warranties, expressed or implied, as to the accuracy
or completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
BT149G
Product data sheet
Suitability for use NXP Semiconductors products are not designed,

authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customers own
risk.
Quick reference data The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Applications Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their
applications and products using NXP Semiconductors products, and NXP
Semiconductors accepts no liability for any assistance with applications or
customer product design. It is customers sole responsibility to determine
whether the NXP Semiconductors product is suitable and fit for the
customers applications and products planned, as well as for the planned
application and use of customers third party customer(s). Customers should
provide appropriate design and operating safeguards to minimize the risks
associated with their applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default
in the customers applications or products, or the application or use by
customers third party customer(s). Customer is responsible for doing all
necessary testing for the customers applications and products using NXP
Semiconductors products in order to avoid a default of the applications
and the products or of the application or use by customers third party
customer(s). NXP does not accept any liability in this respect.
Limiting values Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those
given in the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customers general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
13 March 2014
11 / 13
BT149G
NXP Semiconductors
SCR
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor
tested in accordance with automotive testing or application requirements.
NXP Semiconductors accepts no liability for inclusion and/or use of nonautomotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards,
customer (a) shall use the product without NXP Semiconductors warranty
of the product for such automotive applications, use and specifications, and
(b) whenever customer uses the product for automotive applications beyond
NXP Semiconductors specifications such use shall be solely at customers
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors
standard warranty and NXP Semiconductors product specifications.
Translations A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
11.4 Trademarks
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
Adelante, Bitport, Bitsound, CoolFlux, CoReUse, DESFire, EZ-HV,
FabKey, GreenChip, HiPerSmart, HITAG, IC-bus logo, ICODE, ICODE, ITEC, Labelution, MIFARE, MIFARE Plus, MIFARE Ultralight,
MoReUse, QLPAK, Silicon Tuner, SiliconMAX, SmartXA, STARplug,
TOPFET, TrenchMOS, TriMedia and UCODE are trademarks of NXP
Semiconductors N.V.
HD Radio and HD Radio logo are trademarks of iBiquity Digital
Corporation.
BT149G
Product data sheet
13 March 2014
12 / 13
BT149G
NXP Semiconductors
SCR
12. Contents
1
General description ............................................... 1
Features and benefits ............................................1
Applications ........................................................... 1
Quick reference data ............................................. 1
Pinning information ............................................... 2
Ordering information ............................................. 2
Limiting values .......................................................3
Thermal characteristics .........................................6
Characteristics ....................................................... 7
10
Package outline ................................................... 10
11
11.1
11.2
11.3
11.4
Legal information .................................................11

Data sheet status ............................................... 11
Definitions ...........................................................11
Disclaimers .........................................................11
Trademarks ........................................................ 12

For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 13 March 2014
BT149G
Product data sheet
13 March 2014
13 / 13
This datasheet has been downloaded from:

www.DatasheetCatalog.com
Datasheets for electronic components.

General Description: 13 March 2014 Product Data Sheet

Uploaded by

Copyright:

Available Formats

General Description: 13 March 2014 Product Data Sheet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

General Description: 13 March 2014 Product Data Sheet

Uploaded by

Copyright:

Available Formats

TO

Product data sheet

2. Features and benefits

Enhanced voltage capability

General purpose switching and phase control

4. Quick reference data

Quick reference data

repetitive peak offstate voltage

repetitive peak reverse

non-repetitive peak on- half sine wave; Tj(init) = 25 C;

half sine wave; Tlead 83 C; Fig. 1

RMS on-state current

half sine wave; Tlead 83 C; Fig. 2;

gate trigger current

Product data sheet

plastic single-ended leaded (through hole) package; 3 leads

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

repetitive peak off-state voltage

repetitive peak reverse voltage

average on-state current

half sine wave; Tlead 83 C; Fig. 1

RMS on-state current

half sine wave; Tlead 83 C; Fig. 2;

non-repetitive peak on-state

half sine wave; Tj(init) = 25 C;

rate of rise of on-state current

IT = 2 A; IG = 10 mA; dIG/dt = 100 mA/

peak gate current

peak reverse gate voltage

peak gate power

average gate power

over any 20 ms period

Total power dissipation as a function of average on-state current; maximum values

Product data sheet

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

RMS on-state current as a function of surge

RMS on-state current as a function of lead

Product data sheet

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

Product data sheet

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

printed circuit board mounted: lead

Transient thermal impedance from junction to lead as a function of pulse width

Product data sheet

All information provided in this document is subject to legal disclaimers.

NXP Semiconductors N.V. 2014. All rights reserved

gate trigger current

VD = 12 V; IG = 0.5 mA; RGK = 1 k;

gate trigger voltage

VD = 600 V; Tj = 125 C; RGK = 1 k

VR = 600 V; Tj = 125 C; RGK = 1 k

VDM = 402 V; Tj = 125 C; RGK = 1 k;

rate of rise of off-state

(VDM = 67% of VDRM); exponential

gate-controlled turn-on ITM = 2 A; VD = 600 V; IG = 10 mA; dIG/