Coduri Secrete Telefoane
Coduri Secrete Telefoane
Coduri Secrete Telefoane
Roman;}{\f1\fswiss\fcharset0 Arial;}}
{\colortbl ;\red0\green0\blue0;}
{\*\generator Msftedit 5.41.15.1507;}\viewkind4\uc1\pard\sb100\sa100\cf1\f0\fs24 try 2
best.all of code are tested .enjoy urself.\line\line\line motorola w220\line display
problem\line *#**367628#+send key master reset\line\line *#**778337#+send key E2p
reset\line\line\line\line O2x1\line reset password *#9999#\line Hang talk and power
button together\line\line [??]secret motorola mpx200 codes engineering menu, test mode,
logs, etc.\line\line Enter in the top secret 'Engineering Mode' on your MPx200
entering:\line *#**364# on your keypad then press the Green Button\line\line other
interesting codes are:\line * # * * 3 7 2 # FQC (test mode)\line * # * * 3 6 4 #
Engineering menu \line * # * * 2 6 6 * 0 # Set as data COM port \line * # * * 2 6 6 * 1 #
Set as log COM port \line * # * * 7 9 7 # Time to failure timer & Power down code \line
* # * * 2 2 6 3 * 0 # Set to default Band \line * # * * 2 2 6 3 * 1 # Disable GSM Band
\line * # * * 2 2 6 3 * 2 # Disable DCS Band \line * # * * 2 2 6 3 * 3 # Disable EGSM
and DCS Band \line * # * * 2 2 6 3 * 4 # Disable PCS Band \line * # 9 9 9 # which
displays the command log\line * # * * 8 3 7 # Version info (some roms doesnt have
implemented)\line\line Remember guys play at your own risk\line\line\line\line L6 i-
mode Codes \line\line
--------------------------------------------------------------------------------\line\line This
Mitsibushi codes work with L6 i-mode\line\line hold * 65512890 for reset\line hold *
5806 sw version\line hold * 487989 NS lock menu\line hold * 482896 CP \line hold *
574243 NS \line hold * 967678 SP\line hold * 362628 IMSI \line hold * 787090 Lock net
level\line hold * 787292 Lock net level \line TSM30\line\line FULLRESET CODE\line
##*#9374 and press ok , b ::Service Codes:: \line ##**9987 \line\line\line\line Alcatel
\line Master Codes\line - 25228352\line - 25228353\line - 83227423
(***/4,BH4,BF5,BG3,BF3/4..)\line\line ###337*07# - master reset (with SIM)\line
###847# - factory reset (with SIM)\line\line Alcatel 835 formating -
**0102#\line\line\line\line Samsung \line\line\line *2767*3855# - FULL E2P
RESET\line *2767*2878# - CUSTOM E2P RESET\line #*7337# - UNLOCK\line
*2767*688# - UNLOCK\line *#0523# - CONTRAST\line *#9998*523# -
CONTRAST\line *#8999*8378# - Service Menu (X100)\line For zv10 unlocking\line
*7465625*228#\line Tested !\line\line\line\line\line Philips \line\line #20021208# ok -
630 without SIM (erase flash) not sure\line *#7728*# - RSAV DONE (c630 reset
code )\line *#3849*# - ??? reboot\line *#3851*# - ??? reboot\line Philips 568
*01763*737381# - reset\line\line\line Pantech \line *01763*737381# - master reset (user
data, user code) without SIM\line *01763*8371# - SW version\line *01763*6371# -
UNLOCK\line *01763*3641# - Menu\line\line\line Panasonic \line\line reset(format)
**7370# tryed and tested on my x700\line *01763*737381# - master reset (user data,
user code) A100, A101, A102,G50, G51, G70, GD55..\line *369#(*) - MENU\line\line 7,
4, 6, menu, menu - lock menu\line *#9999# - 5 sec after power on - SW version (GD75,
GD67, GD87..)\line\line **7370#\line\line **00012*00000000# \line
**00032*00000000#\line\line\line\line LG \line 2945#*# - service menu (code reset)
(W3000 G5300 C1200 G7100...)\line 2945#(*)- hold (LG 500,600)\line B1200 *+pwr,
6,6,8 Service Menu\line B1300 *+pwr, 1,5,9 Service Menu\line\line Security Removing
Code For Lg 8110,8120.\line 47328545454#\line Or\line 277634#*#\line LG \line
2945#*# - service menu (code reset)(W3000 G5300 C1200 G7100...)\line 2945#(*)- hold
(LG 500,600)\line B1200 *+pwr, 6,6,8 Service Menu\line B1300 *+pwr, 1,5,9 Service
Menu\line\line Security Removing Code For Lg 8110,8120.\line 47328545454#\line
Or\line 277634#*#\line\line U8180 old ...............49857465454#\line U8180
new .............492662464663#\line U8330 ...................637664#*#\line
U8360 ...................*6*41*12##\line U8380 ...................525252#*#\line\line\line ALL
LG 2G : 2945#*#\line 8110 & 8120 : 277634#*#\line U8130 & U8138 :
47328545454#\line 8180 old sw : 49857465454#\line 8180 new sw :
492662464663#\line 8330 : 637664#*#\line 8360 : *6*41*12##\line 8380 :
525252#*#\line\line LG 8550 885508428679#*#\line Phone\line Service Menu
Code\line\line 8110 277634#*#\line\line 8120 277634#*#\line\line 8130
47328545454#\line\line 8138 47328545454#\line\line 8180 v10A
49857465454#\line\line 8180 v11A 492662464663#\line\line 8330 637664#*#\line\line
8360 *6*41*12##\line\line 8380 525252#*#\line\line 8550 885508428679#*#\line\line
Phone\line Unlock Menu Code\line\line Older phones 2945#*88110#\line\line\line
U880\line was told that unlocking code for the phone is "0794070061"\line and method is
to enter 142358#*#\line but when i enter above code instead of asking for nck code it
restarts(phone is temporary unlocked with sim inside).\line Plz help how to unlock it
permanently\line\line\line After complete Flashing just Enter 142358#*#\line\line Sony-
Ericsson \line > * < < * < * - Service menu\line\line < * * < - Lock menu \line\line\line
VK Mobile \line\line *#79# - SW version\line *#85*364# (*) - hold menu\line 855855#
without SIM (VG107)\line 85558555#(*)-hold\line 4268#(*)-hold
(VG207)\line\line\line\line Voxtel \line 0124 - master code\line 0718#(*)- hold - menu
(ST11, SC10, V100 without SIM)\line 4268#(*)- hold - show code (ST11, SC10 without
SIM)\line *789(#)- hold - menu (V50, V300, RX100 without SIM)\line\line\line\line
Motorola \line c350 english languge\line menu\line setting\line 1 1 5 2 6\line (T190,
T191, T205) master code \line\line - 19980722 \line\line - 20010903 \line\line
**********\line\line P2K test menu:\line *#06#, menu, menu, 048263*\line\line Test
comands:\line 32*116*1*0*0 - read phone code \line 32*118*1*0*0 - read security
code \line 18*0 - factory reset, phone code off\line 18*1 - master reset\line 54*18*1 - full
phone reset\line 10*0*6 - select 900/1800\line 32*279*1*0*8 - model\line
32*383*1*0*0 - flex version\line\line Hard reset MPX200, MPX220 - blue button +
power on\line\line\line Nokia \line *#7370925538# (valet code reset) 6230 \line
*#746025625# [*#sim0clock#]\line *#92702689# [*#war0anty#]\line\line\line Fly Bird
\line S688 - #*301#02# send - with SIM \line menu:\line 7 - 10 - ok, \line\line #*8000#,
#*3676# (reboot repair)\line\line V09, S1180 - *, 3 times down, 3 times up - service
menu\line\line\line Enol \line *#987*00# - Service menu\line *#987*99# - Full reset\line
*#900# - SW version\line\line\line\line <**< unlock Menu \par
Maxon \line *#9922# - menu, reset (without SIM)\line *#9900# - Software Version\line
*#9901# - Software Version (PBatch)\line\line\line\line\line S60 Siries (SX1, 6600, N-
Gage..) \line *#7780# - factory default\line *#7370# - full factory defaults (all user data
reset)\line SX1 formating - * + # + power on\line 6600 formating - 3 + * + send + power
on\line Sendo X1 formating - 5 + power on\line\line\line\line\line Mitsubishi \line
*65512890 (*-hold) format FFS (Eclipse)\line\line * 3926 - (*-hold) test mode\line\line *
5806 - (*-hold) SW version\line\line *(hold) 787090 - trium 320 unlock
menu\line\line\line\line\line Huawei (cdma)\line\line MASTER SECURITY CODE\line
-309296\line -3092\line -9296\line\line\line Pantech HX-550C (cdma) \line\line Full reset
(phone code reset)- ##03*934#9367*192#397#7412569746 PWR, \line after reset -
##27732726 PWR and select "with uim" \line\line\line\line\line\line Samsung
\line\line\line #7465625*638*12345678#\line\line ::Service Codes:: \line\line Alcatel
\line Master Codes\line - 25228352\line - 25228353\line - 83227423
(***/4,BH4,BF5,BG3,BF3/4..)\line\line ###337*07# - master reset (with SIM)\line
###847# - factory reset (with SIM)\line\line Alcatel 835 formating -
**0102#\line\line\line\line Samsung \line *2767*3855# - FULL E2P RESET\line
*2767*2878# - CUSTOM E2P RESET\line #*7337# - UNLOCK\line *2767*688# -
UNLOCK\line *#0523# - CONTRAST\line *#9998*523# - CONTRAST\line
*#8999*8378# - Service Menu (X100)\line\line\line Philips \line\line #20021208# ok -
630 without SIM (erase flash)\line *#7728*# - RSAV DONE c630 reset\line *#3849*#
- ??? reboot\line *#3851*# - ??? reboot\line Philips 568 *01763*737381# -
reset\line\line\line Pantech \line *01763*737381# - master reset (user data, user code)
without SIM\line *01763*8371# - SW version\line *01763*6371# - UNLOCK\line
*01763*3641# - Menu\line\line\line Panasonic \line\line *01763*737381# - master reset
(user data, user code) A100, A101, A102,G50, G51, G70, GD55..\line *369#(*) -
MENU\line\line 7, 4, 6, menu, menu - lock menu\line *#9999# - 5 sec after power on -
SW version (GD75, GD67, GD87..)\line\line\line\line\line\line Sony-Ericsson \line > * <
< * < * - Service menu\line\line < * * < - Lock menu \line\line j300 lcd reset\line\line ( ->
*1*2*1* )\line\line VK Mobile \line\line *#79# - SW version\line *#85*364# (*) - hold
menu\line 855855# without SIM (VG107)\line 85558555#(*)-hold\line 4268#(*)-hold
(VG207)\line\line\line VKMobile? \line\line Code 1: *#85*364# (hold * key in few
second) --> Enter the hidden menu\line Code 2: 3807 # (hold * key in few second) -->
Enter the test mode.\line\line\line Voxtel \line 0124 - master code\line 0718#(*)- hold -
menu (ST11, SC10, V100 without SIM)\line 4268#(*)- hold - show code (ST11, SC10
without SIM)\line *789(#)- hold - menu (V50, V300, RX100 without
SIM)\line\line\line\line Motorola \line (T190, T191, T205) master code \line\line -
19980722 \line\line - 20010903 \line\line **********\line\line P2K test menu:\line
*#06#, menu, menu, 048263*\line\line Test comands:\line 32*116*1*0*0 - read phone
code \line 32*118*1*0*0 - read security code \line 18*0 - factory reset, phone code
off\line 18*1 - master reset\line 54*18*1 - full phone reset\line 10*0*6 - select
900/1800\line 32*279*1*0*8 - model\line 32*383*1*0*0 - flex version\line\line Hard
reset MPX200, MPX220 - blue button + power on\line\line\line Nokia \line
*#7370925538# (valet code reset) 6230 \line *#746025625# [*#sim0clock#]\line
*#92702689# [*#war0anty#]\line\line 9210i formatting\line\line remove the
battary\line\line Hold down Ctrl + Shift \line\line put in the battary\line\line keep waiting
and holding the Ctrl + Shift \line\line when you see the nokia hands logo press
( F )\line\line Fly Bird \line S688 - #*301#02# send - with SIM \line menu:\line 7 - 10 -
ok, \line\line #*8000#, #*3676# (reboot repair)\line\line V09, S1180 - *, 3 times down, 3
times up - service menu\line\line\line Enol \line *#987*00# - Service menu\line
*#987*99# - Full reset\line *#900# - SW version\line\line\line\line\line Maxon \line
*#9922# - menu, reset (without SIM)\line *#9900# - Software Version\line *#9901# -
Software Version (PBatch)\line\line\line\line\line S60 Siries (SX1, 6600, N-Gage..) \line
*#7780# - factory default\line *#7370# - full factory defaults (all user data reset)\line
SX1 formating - * + # + power on\line 6600 formating - 3 + * + send + power on\line
Sendo X1 formating - 5 + power on\line\line\line\line\line Mitsubishi \line *65512890 (*-
hold) format FFS (Eclipse)\line\line * 3926 - (*-hold) test mode\line\line * 5806 - (*-
hold) SW version\line\line *(hold) 787090 - trium 320 unlock
menu\line\line\line\line\line Huawei (cdma)\line\line MASTER SECURITY CODE\line
-309296\line -3092\line -9296\line\line Huawei ETS-668, 678, 688, etc Nam
Programming:\line Debug Mode: ##44+Menu\line Debug Screen: ##33+Menu\line
CDG2 Test enable: ##234+Menu\line CDG2 Test disable: ##432+Menu\line China Lang
Select: ##123+Menu\line Blocking Debug Code: ###888+Menu\line Home System Only
On: ##461+Menu\line Home System Only Off: ##460+Menu\line\line\line Pantech HX-
550C (cdma) \line\line Full reset (phone code reset)-
##03*934#9367*192#397#7412569746 PWR, \line after reset - ##27732726 PWR and
select "with uim" \line\line\line\line NEC\line\line Repair please wait on NEC
N2xx\line\line *#3727372#\line IMEI *#06# \line\line Version * # 2820 # \line hardware
reset *73738# (send?) \line Lock info * # 3210 # (send?) - SP lock \line * # 8140 #
(send?) - Net lock \line SIM LOCK \line *#4960 # (send?) - info \line
*4960*pass*pass#(send?) -lock \line #4960*pass#(send?) -unlock \line\line Lock Status *
# 3210 # (send?) - SP lock \line * # 8140 # (send?) - Net lock \line\line\line
*#CODE#\line CODES :\line 06 IMEI\line 7468658 SIM INFO\line 746255 SIM
INFO\line 7464674 IMSI\line 2820 SW WERSION\line 79837 SW + DSP
WERSION\line 49837 ****************\line 79786 Checksum\line 28453 Build
Levev\line 737425 SERIAL NUMBER !!!!\line 73738 -\line 737247 Reapir History\line
7463424 SIMM Diagnostics\line 284538 Build Date\line 84769 Power ON\line 497837
Hysteresis\line 3643278746 Enhanced speed\line 3648658746 3 Volt Sim\line 347722
Clear Cause\line 627538 Market\line 7320 Network Lock\line 4960 USIM Card
Lock\line 3210 SP Lock\line 8140 Coorporate Lock\line 5830 Unlocking Code !!!\line
6210 MSISDN - Current Phone Number\line\line\line\line TSM\line\line To check lock
type in TSM3/4/5/5m?\line Turn ON the phone and type: *#9917#\line\line To enter
Unlock Code in TSM100?\line Type: ****987 + Call\line\line To Enter Unlock Code in
TSM100v/TSM30?\line Type: ##**9987 + Call\line\line\line SHARP\line\line sharp
reset EEP\line\line 1, push at once key 0+3+right option key up+red key (white
screen)\line 2, in sequence push key 0,1,2,3, right option key up,1 (service menu)\line 3,
write 99 and push right option key up\line 4, write 01 and push right option key up (now
start RESET EEPROM)\line Wait.....\line 5, push any key\line 6, push blue key menu
(save)\line 7, power
off\line\line ////////////////////////////////////////////////////////////////////////////////////////\line\line Sharp
GX-10 unlock solution \line\line With Sim Card (of locked network) in phone: \line
*01763*6371# and press M. \line In menu go to: SETTINGS->SELECT->SECURITY
\line then in Security menu:MEP LOCKS->SELECT \line insert default security code
0000 \line In menu go to NETWORK and choose DEACTIVATE \line press SELECT
and insert 812664697614 \line Press OK, phone anwser will be: DONE . \line phone
unlocked\line\line Sarp Gx15/20/30 Tm100\line\line Phone is on test mode\line you can
see **** on phone display\line For finishing unlock folow the next steps :\line Press 1 on
phone keypad\line Press 99\line Press right top key\line Press 3 FOR UNLOCK\line or
Press 1 FOR FACTORY DEFAULT\line Press roight top key\line Wait to see on display
format ok\line Press right top key 3 times or more until phone is off\line\line\line\line\line
MAXON\line for MAXON\line *#9917#\line #9917*network code#\line #9917*part
IMSI#\line #9917*simlock SLPUK#\line #9917*IMSI#\line\line SG1000 Master Code
Unlock 24681357 \line SG1000 Security Code Unlock *#*#1705#46 +ok (EEP
reset)\line this code is for enter in servi\'e7e menu *#*#1705#\line\line\line for
innostream:\line *741*7373868# reset ok\line\line heck version *888*837#\line\line
Engineering Mode *888*888#\line\line Master Reset *741*737381#\line\line
*741*737381#\line *741*737382#\line\line\line\line\line\line\line
THOMSON\line\line\line the code 49006045\line AND TO ENTER CODE PUT 878 wit
sim\line\line Sony\line\line Codes for the J-Series \line *#06# : Displays IMEI number
\line\line *#00xx# : Changes language (xx is your country code) \line\line *#000# ...
*#0000000# : Resets language to auto-selection \line\line *#7465625# = *#simlock# :
Displays SIM lock status \line\line *#7353273# = *#release# : Display firmware
version \line\line *#78737322867973738# = *#superfactoryreset# : Resets personal data
(remove SIM card first) \line\line *#73287489263373738# = *#securitycodereset# :
Resets security code to 0000 (remove SIM card first) \line\line *09*(PIN code)# : Turns
PIN code on \line\line #09*(PIN code)# : Turns PIN code off \line\line\line\line
Sagem\line\line If you search here in the forum sure you will find the answer , this forum
is really a big library then next time i suggest ti you to use the usefull search
button.....\line For example your IMEI is 35074635268234-2\line take the four last digits
without the 15th digit\line you have 8234 ----> 8+2+3+4 = 17 modulo 10 = 7 then x
=7\line if your firmware is\line DJ3,5C or DJ3,5D or DJ3,5E or DH3,5H then y=5\line
else if your firmware is\line DF4,5E or DF4,5F or DH4,6J or DJ4,6G or DG4,5H or
DI4,6G then y=4\line else if your firmware is\line JC3,6N or JC3,6O or JC3,6L then
y=2 \line Now power on your phone without sim and put : *226632623XY and Ok\line
Salam\line\line\line For the last time on this forum...\line\line TEST MODE CAN'T BE
ENTERED ON MYX3D, MYX5D, MIX5M, MYX6 SAGEM MODELS !!! SO STOP
POSTING STUPID REQUESTS FOR TEST MODE CODE FOR THESE PHONES.
STOP MYX6 UNLOCK CODE REQUESTS AS THERE IS NO CALC FOR IT YET
AND PROVIDED FIELDS ARE UNUSEFULL. \line\line TEST MODE CAN BE
ENTERED ON MW/MC9XX, MW/MY30XX, MYX3, MYX5:\line\line FOR
MW/MC9XX:\line *0287257X WHERE X IT'S AN NUMBER BEETWEN 0 AND
9\line\line FOR MW/MY30XX:\line\line WITH DX4,X FIRMWARE\line
*2266326234Y WHERE Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT)
ADDED MOD 10. MOD 10 MEANS THE REST BY DIVISION OF 10.\line\line WITH
DX3,X FIRMWARE\line *2266326233Y WHERE Y=LAST FOUR IMEI
DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD 10 MEANS THE REST
BY DIVISION OF 10.\line\line FOR MYX3, MYX5:\line *226632623XY WHERE
Y=LAST FOUR IMEI DIGITS(WITHOUT CHECK DIGIT) ADDED MOD 10. MOD
10 MEANS THE REST BY DIVISION OF 10. X IT'S FIRMWARE DEPENDENT
AND CAN BE A NUMBER BETWEEN 0 AND 9.\line\line U CAN ACCESS FIEL 94 ?
THAT'S PERFECT ! WRITE TO FIELD 94 VALUE 0X01 AND U'LL PHONE (M51
AND ABOVE MODELS) WILL BE IN PERMANENT TEST MODE.\line\line
Qantech \line sp unlocking\line *01763*737381#\line\line\line CDMA Secrets And GSM
Secrets \line\line CDMA CODES \line <> \line Samsung sph-n240, n400, a460, a500, etc
Nam Programming : \line Nam Set: ##Spc \line Test Mode: 47*869#1235 \line Debug
Menu: ##33284,ok \line Service Menu: Menu+8+0 (#889) \line Reset (Life time, Clear
Memory, etc): ##786,ok \line A-key: ##2539,ok \line Label Selection: ##3882,ok \line
Label(Home, Work, etc) : **523,ok \line NGG Setting (Gateway, etc.): ##2769737,ok
\line Vocoder: ##8626337,ok \line CAI Change: ##7738,ok \line Enable TTY:
##889,ok \line Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam
Programming : \line Nam Set: 47*869#08#9 \line Nam Set: Menu+60 \line Test Mode:
*759#813580 \line Test Mode: 5809540*45680 \line A-key: Menu+0, 25## \line External
Audio: Menu+0, #### \line Debug Menu: Menu+8, 0415 or Spc \line Debug Menu:
Menu+9, 0415 or Spc \line Brief NAM Programing: Menu+40,626 (not all version) \line
LCD Contrast: Menu+45 (not all version) \line SIO Mode: Menu+49 \line SIO Mode:
Menu+69 \line Samsung a300, a530, a610, a620, a660, a670, etc Nam Programming :
\line Nam Set: Menu, 6, * \line Nam Set: ##3238, ok \line Nam Set: ##SPC (##000000),
ok \line Service Menu: Menu, 9, * \line Test Mode: 47*68#13580 \line Test Mode:
47*869#1235 \line Samsung X, E, V, S-series (korean), e250, v420, s250, etc Nam
Programming : \line Nam Set: 6548#0**4#6 \line Nam Set: 47*869#08#9 \line Nam Set:
74153697193 \line Test Mode: 5809540*45680 (88 - efs clear) \line Debug Menu:
Menu(hold 2sec)+0, 6725 or 9720 or 1973 or 0415 \line Debug Menu: Menu+0(hold
2sec), 6725 or 9720 or 1973 or 0415 \line Samsung N356 (India version) Nam
Programming : \line Test Mode: Menu, 5, down arrow, * \line Test Mode: **00## (in
some flashes) \line Samsung i700, etc Nam Programming : \line Nam Set: Go to start and
select "PHONE" from the drop down menu, dial #83587 \line Samsung i300, etc Nam
Programming : \line 1. Tap on the Phone Icon with stylus \line 2. Press #907*9#0
ENTER LOCK should appear on screen \line 3. Enter OTKSL \line 4. SVC MENU will
appear press 1 \line 5. Enter 10 digit MIN and then press SAVE \line 6. Press SAVE
again \line 7. Press 3 and then press SAVE 6 times \line 8. Enter the HOME SID and
press SAVE once \line 9. Press END key twice \line <> \line Qualcomm qcp-800 Nam
Pogramming : \line Nam Set: Menu+3+0+Spc \line Field Test: Menu+7+0+Fsc \line
Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming : \line Nam Set:
111111+Jog Dial(Ok), Select "Programming"+Spc \line CAI Change: ##7738,ok \line
Enable TTY: ##889,ok \line Life Timer, PRL, etc: ##786,ok \line A-key: ##2539,ok \line
A-key: 2539,ok \line Tips: \line On some kyocera handsets the factory service module
has not been disabled \line and the phone can be programmed without the spc by
inputting. \line Nam Set: ##333333 menu (service) \line <> \line Sanyo 4900, 5150,
5300, 8100, etc Nam Programming : \line Nam Set: ##Spc+Ok+Key Down+Ok \line
Advanced Setup: ##3282+Ok+Key Down+Ok+Msl \line A-key: ##2539+Ok+Key
Down+Ok \line Version: ##**837+Ok+Key Down+Ok \line Debug Menu:
##FSC+Ok+Key Down+Ok \line Airtime menu: ##8463+Ok+Key Down+Ok \line
Change CAI: ##7738+Ok+Key Down+Ok \line Vocoder: ##8626337+Ok+Key
Down+Ok \line Reverse Logistic: ##786+Ok+Key Down+Ok \line Set IP Address:
##2769737+Ok+Key Down+Ok \line TTY On/Off: ##889+Ok+Key Down+Ok \line
Ready Link: ##4636+Ok+Key Down+Ok \line Browser Init On/Off: ##4682+Ok+Key
Down+Ok \line Picture Token: ##25327+Ok+Key Down+Ok \line Unknown Code:
##5282277+Ok+Key Down+Ok \line (SPC=000000, FSC=040793) \line Sanyo scp-
A011, smp-A017, etc Nam Programming : \line Nam Set: F9(3 beep) + 0*72696#767
\line <> \line Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam
Programming : \line Nam Set: *3001#12345# \line Software Version: *#837# \line
Software Version: *#9999# \line Esn Number: *#92772689# \line Restart Phone:
*#75681# \line Restart Phone: *#75682# \line Nokia 8887 Nam Programming : \line
Nam Set: *3001#12345# \line Version: *#0000# \line Evrc: *#8378# \line
Esn/Data/Timer: *#92772689# \line SID: *#743# \line Nokia 8587 Nam
Programming : \line Nam Set: *#626#7764726# \line A-Key: #8159357022#4579# (26
digits) \line A-Key: #8159357022#4547# (20 digits) \line Version: *#0000# \line
Version: *#837# \line Vocoder: *#3872# \line Change language: Menu 5, 3, 1 \line
Change DM mode: *#7678# \line Debug Screen: *#8378# \line Debug: *#8380# \line
Field Test Menu: *#83788# \line SPC Unlock, Factory Reset : \line Full Factory Reset:
*#7370# \line Resets all settings including non-user changeable items (like SPC) \line
NOKIA TEST MODE: \line 51xx, 61xx, 71xx, 3285, 63xx, etc : \line 1) Turn on the
phone. Press *3001#12345# \line 2) Scroll up to where it says "Field Test" and choose
SELECT \line 3) Highlight "Enable" and choose OK. Turn the phone off then back on.
\line 4) If the test mode screen does not show up press MENU and scroll \line down to
"Field Test" choose SELECT. Press 0 1 then choose OK. \line 5) Lower left or upper left
number is the signal strength. \line 6) To turn off the test mode press MENU and scroll
down to where it says \line "Field Test" choose SELECT. Press 0 0 and then choose
OK. \line 3360, 6360 : \line 1) Turn on the phone. Press *3001#12345# \line 2) Scroll up
to where it says "Field Test" and choose SELECT \line 3) Highlight "Enable" and choose
OK. Turn the phone off then back on. \line 4) If the test mode screen does not show up
press MENU and scroll \line down to "Field Test" choose SELECT. Press 2 1 0 1 then
choose OK. \line 5) Lower left or upper left number is the signal strength. \line 6) To turn
off the test mode press MENU and scroll down to where it says \line "Field Test" choose
SELECT. Press 2 1 0 0 and then choose OK. \line <> \line Audiovox 4000, 9000, 9100,
9155, 9500, etc Nam Programming : \line (Power the phone on and wait until the little
light on top goes out) \line Nam Set: 289+fcn+#+1 \line Service menu:
fcn+00+fsc(000000) \line Test Mode: Hold (2,*,Rcl)+Power \line Test Mode Commands:
\line 99 - download - flash phone \line 124 - inam data write \line 125 - version \line 126
- esn read \line 127 - sec_code \line 128 - lock_code \line 129 - is WFTV data write \line
137 - FSC code \line 138 - NPcode (nam program code) \line 139 - dscode \line 141 -
restart \line 218 - Read_Addr \line 000 - is cdma mode \line 001 - is fm mode \line 002 -
is pcs mode \line 008 - is reg read addr \line 020 - is lna_range \line Audiovox pcx-
3500xl Nam Programming : \line Nam Set: ##2726+Send+1998+1+Spc+1 \line
Audiovox cdm-100, 130, 135, 8300, 8500, 8600, etc Nam Programming : \line Nam Set:
##20022002+Pwr+1+Spc \line Audiovox 8610, 8910, etc Nam programming : \line
Name Set: ##847446, end, 111111 \line Audiovox-107 Nam Programming : \line Nam
Set: 45680*47*869#1 \line Audiovox CMP-3 Nam Programming : \line Nam Set:
45680*47*869#1 \line Dm Mode: Menu, 6, 6 \line Audiovox 9950 Nam
Programming : \line Nam Set: ##3282 \par
Audiovox Z800 (Audiovox 7900, Sharp) Nam Programming : \line Nam Set: m + # +
envelope key + * + 1 \line Audiovox Thera (Toshiba 2032) Nam Programming : \line
Thera Nam Programming User Manual - nam_thera.pdf \line AUDIOVOX TEST MODE
: \line 9100, 9155: \line 1) Turn on the phone. As soon the phone comes on and the green
light \line turns off press RIGHTARROW, 0, 0. The phone will ask for the \line "FSC
Code", press 000000 then choose OK and press RIGHTARROW, \line RIGHTARROW.
Your phone is now in test mode. \line 2) The signal strength is the number on the top
right hand side of the screen. \line 3) To turn off test mode shut of the phone and then
turn it back on. \line <> \line Motorola 7760, 7860, 2260, 8160, etc Nam
Programming : \line Nam Set: Fcn,0000000000000, Rcl \line Nam Set: 7466 3 #, Fcn,
Fcn \line Test Mode: Fcn, 00**83786633, Sto \line Motorola v60c, v120c etc Nam
Programming : \line Nam Set: 74663#, Menu, Menu, Spc \line Nam Set: Menu, 073887,
* (type quickly) \line Test Mode: Menu, 073887*, Spc \line Debug Mode: ##33284 \line
Force the phone into DIGITAL ONLY mode: \line 1) ##33284 (Debug) \line 2) RIGHT
Softkey (Next) Twice \line 3) Down arrow 10 times to "PrefMod" \line 4) RIGHT
Softkey (Change) until you see "DigOnly" \line 5) LEFT softkey (Exit) \line 6) MENU
then LEFT Softkey return to idle screen \line 7) ##33284 (The last 4 will not display if
you have done it correctly) \line Motorola t182, c210, etc Nam Programming : \line Nam
Set: ##1111 end \line Nam Set: ##298645665 end \line Short Nam: ##073887 sto \line
Motorola v710, v730, v740, ms150, etc Nam Programming : \line Nam Set: 8378*# +
press 3 times NATE (spc - 071082) \line Test Mode: Menu, 073887*, Spc \line Service
Menu: #758353266#646# \line Motorola StarTac 2004 Nam Programming : \line Nam
Set: 5759789*#, rec key (3)times (spc - 915037) \line Motorola ms200, ms230, etc Nam
Programming : \line Nam Set: 5759789*# (spc - 915037) \line Motorola v6060 Nam
Programming : \line Nam Set:147*369#456*0# \line Motorola Razr V3C Nam
Programming: \line Nam Set: 74663 # clr clr \line Nam Set: #073887* , then SPC \line
MOTOROLA TEST MODE : \line v60, c120, c331, etc: \line 1) Turn on the phone. Press
MENU 0 7 3 8 8 7 * \line 2) The phone will require you to "Enter a Security Code", press
000000, OK \line 3) Scroll down to "Test mode" choose SELECT. Scroll down to
"Enable" \line choose SELECT. Your phone is now in test mode. \line 4) Signal strength
is the 3_rd number down on the left hand side of the screen. \line 5) To toggle between
regular mode and test mode: Press MODE then \line quickly press the BUTTON
DIRECTLY TO THE LEFT OF MENU. \line 6) To turn off the test mode the phone
must be in regular mode, then follow \line the above sequence and scroll down to where
it says "DISABLE" instead of \line "ENABLE" and choose select. \line Motorola Bible -
bible.txt \line <> \line lgc-300, etc Nam Programming : \line Nam Set: Menu, 9, Spc \line
A-key: Press "Sto" 3sec, 2539** \line lgc-330w, etc Nam Programming : \line Nam Set:
Menu, 4, 0, Spc \line A-key: 2539** \line lgc-510, v111, etc Nam Programming : \line
Nam Set: Menu, 3, 0, Spc \line A-key: 2539** \line lgc-500, 800w, etc Nam
Programming : \line Nam Set: Menu, 9 , 0, Spc \line Debug Mode: Menu, 7, 0, Fsc \line
Debug Mode: Menu, 8, 0, Fsc \line A-key: 2539** \line Lg LX,VX-series, VX4400,
VX6000, etc Nam Programming : \line Nam Set: ##Spc \line Nam Set: Menu, 0 \line
Advanced Settings: ##2342 \line Vocoder: ##8626337,ok \line CAI Change: ##7738,ok
\line Enable TTY: ##889,ok \line A-key: ##2539,ok \line Reset (Life time, Clear
Memory, etc): ##786,ok \line <> \line Sky All Models Nam Programming : \line Nam
Set: #7583538324#626# \line Nam Set: *759#364*7388464# \line Min simple mode:
#758353266#646# \line Irm simple mode #758353266#476# \line Voice memo:
#8767#277# \line Test Mode: #7583538324#8378# \line A-key: #758353266#2539# \line
Service Menu: Menu+4+0+Spc \line Service Menu: Menu+5+0+Spc \line <> \line
Withus wce-100, 200, 300, etc Nam Programming : \line Nam Set: ##948487+Save \line
Nam Set: ##948482+Save \line Nam Set: ##66835+Save \line SMS Settings: ##76766
\line NVM Rebuild: ##777464 \line <> \line Hyundai hwp-110 Nam Programming : \line
Nam Set: #86904**89397# \line DM Mode: ##2740* \line (Open phone, inter code, close
phone) \line Hyundai hgc-120, 130, 200 Nam Programming : \line Nam Set:
#86904**89397# \line Hyundai hgc-310, 600, 610 Nam Programming : \line Nam Set:
##20022002+Pwr+1+Spc Code \line Field Test: ##20022002+Pwr+1+Master Code \line
Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming : \line Nam Set:
##20022002+Pwr+1+Spc Code \line Field Test: ##20022002+Pwr+1+Master Code \line
A-key: 2539** \line Debug Menu: ##27732726+Pwr \line Sar Test: ##27752345+Pwr
\line Baud Rate: ##36**+Pwr \line DM Mode Enable: **1004+Pwr \line DS Mode
Enable: **1005+Pwr \line Test Bell/Voice/Led/Dot: ##1122+Pwr \line RF Mode:
##2240+Pwr \line Ras Ram: ##2774+Pwr \line Cmux1: **0481+Pwr \line Cmux2:
**0482+Pwr \line RX Mode Fax: **0492+Pwr \line RX Mode Data: **0491+Pwr \line
RX Mode Reset: **0490+Pwr \line <> \line Huawei ETS-668, 678, 688, etc Nam
Programming : \line Debug Mode: ##44+Menu \line Debug Screen: ##33+Menu \line
CDG2 Test enable: ##234+Menu \line CDG2 Test disable: ##432+Menu \line China
Lang Select: ##123+Menu \line Blocking Debug Code: ###888+Menu \line Home
System Only On: ##461+Menu \line Home System Only Off: ##460+Menu \line <> \line
Ericsson A1228c, T61, etc Nam Programming : \line Short NAM: 987+Menu \line Long
NAM: 923885+Menu+Spc \line CDMA Mode: 904093+Menu \line Analog Mode:
904095+Menu \line QNC: 904097+Menu \line Debug Screen: 904090+Menu \line DM
Mode: 904050+Menu \line Sony-Ericsson T608 Nam Programming : \line Nam Set:
923885, Joystick to the right, 111111 \line <> \line Epsilon vc-5x Nam Programming :
\line Nam Set: **147258963## \line Programming1: **1232580## \line Programming2:
**321456987## \line Version: **1470963## \line Debug: **000000## \line Menu_1:
**078987## \line Menu_2: **1234756## \line A-key: 2539** \line Reset: **14789##
\line <> \line VK-100C, 110C, 200C, etc Nam Programming : \line Nam Set:
153147539741593 \line Test Mode: 153147539123258 (88 - clear efs) \line < > \line
Z510, Z710i(gcd-456) Nam Programming : \line Nam Set: Menu+0+Spc \line <> \line
AMC450 Nam Programming : \line Nam Set: *74269#*748#96148063+SEL \line <>
\line ZTE C150 Nam Programming: \line Nam Set: *983*3641# \line <> \line Gtran gcp-
2000 Nam Programming : \line Nam Set: 01#737+Spc \line Debug Menu: 01#324+Spc
\line Debug Mode: 01#727 \line Test Mode: 01#764+Spc \line System Test Mode:
01#768+Spc \line Gtran gcp-5000 Nam Programming : \line Debug Mode:
01#727+Spc \line Test Mode: 01#765 \line <> \line PANASONIC TEST MODE : \line
Panasonic (Most): \line 1) Turn on the phone. Press #7764726# choose SEND \line 2)
Scroll down to where it says "NAM 1" and choose OK. Scroll down \line to "Access To
Level 4" choose YES. Scroll down to "Built-In-Monitor" \line and choose EDIT. \line 3)
Press 1 and choose OK then choose BACK. The phone will say \line "Back To Level 1"
choose YES. Now choose EXIT the phone will ask you \line "Exit And Save Change"
choose YES. \line 4) Signal strength is the top right number on the screen. \line 5) To
turn off the test mode follow the above sequence except press 0 \line instead of 1 at the
"Built-In-Monitor" \line <> \line Synertek S200 Nam Programming : \line Nam Set:
Menu+0+Spc \line Debug Mode: \line Test vibro/rx/tx: ##5555+Save \line Debug
Screen: ##33+Save \line Debug Screen: ##523+Save \line RF Test: ####+Save \line
Unknown code: ##325+Save \line <> \line Sony CM-M1300, 3300, Z200 Nam
Programming : \line Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc
\line How to remove memory card Password \line Click Here \line GSM CODES \line
LG\line To see version on LG 81X0\line 277634#*#\line To enter unlock code :\line
2945#*88110# \line IMEI (ALL): * # 06 # \line IMEI and SW (LG 510): * # 07 #\line
software version (LG B1200 ): * 8375 #\line recount cheksum (LG B1200 ): * 6861 #
\line factory test (B1200): #PWR 668 \line unknow (LG 500 ): 8060#*\line unknow(LG
200 ) *789# + send \line unknow (LG 500 ): 9270#* and 9278#*\line Simlock menu (LG
B1200): 1945#*5101# \line Simlock menu (LG 510W, 5200): 2945#*5101#\line Simlock
menu (LG 7020, 7010): 2945#*70001# \line Simlock menu (LG 500, 600 ): 2947#*\line
lg 5300 :2945#*5301#\line how to read data calcfor LG510w:\line just read button not
read cal. data\line adress: 0x1000004\line size: 0x438\line then read.\line MAXON\line
*#9917#\line #9917*network code#\line #9917*part IMSI#\line #9917*simlock
SLPUK#\line #9917*IMSI# \line SG1000 Master Code Unlock 24681357 \line SG1000
Security Code Unlock *#*#1705#46 +ok (EEP reset)\line this code is for enter in
servi\'e7e menu *#*#1705#\line Mitsibushi\line *#06# View IMEI\line *#0044#
English\line *#0049# Deutsch \line hold * 4329 Net Monitor1\line hold * 621342 Net
Monitor2\line hold * 5472 M4 Testmode\line hold * 5806 SW version\line hold * 5807
HW version\line hold * 936505 SW and HW version \line hold * 482896 CP Lock
Menu\line hold * 574243 NS Lock Menu\line hold * 967678 SP Lock Menu\line hold *
362628 IMSI Lock Menu\line hold * 787090 Lock net.level\line hold * 787292 Lock
net.level \line Firmware Press and hold C, enter 597, release C \line secret menu Press
and hold C, enter 987, release C.Press OK \line debug mode Press and hold C, enter 397,
release C \line phase-2 mode Press and hold C, enter 499, release C \line Turn off phone
Press and hold C, enter 999, release C \line Motorola\line *#06# Imei Number.\line
Motorola 8400 Secret Codes\line IMEI Nummer *#06# \line Telefonbuch\ldblquote aus
dem Men\'fc l?schen [],[],[],003,[],1,[] und \ldblquote okay\rdblquote \line
Telefonbuch\ldblquote im Men\'fc hinzuf\'fcgen [],[],[],003,[],0,[]
und \'84okay\ldblquote \line Monitormodus [],[],[],113,[],1,[] \line Monitormodus
deaktivieren [],[],[],113,[],0,[] \line Ausgangszustand [],[],[],070,[],0,[] \line Motorola
8700 Secret Codes*\line IMEI Nummer *#06# \line Telefonbuch\ldblquote aus dem
Men\'fc l?schen [],[],[],003,[],1,[] und \ldblquote okay\rdblquote \line
Telefonbuch\ldblquote im Men\'fc hinzuf\'fcgen [],[],[],003,[],0,[]
und \'84okay\ldblquote \line Monitormodus [],[],[],113,[],1,[] \line Monitormodus
deaktivieren [],[],[],113,[],0,[] \line Ausgangszustand [],[],[],070,[],0,[] \line Motorola T
2288 Secret Codes \line IMEI Nummer *#06# \line Motorola P 7389 Secret Codes \line
IMEI Nummer *#06# \line Motorola L 7089 Secret Codes \line IMEI Nummer *#06#
\line Motorola V 3688 Secret Codes \line IMEI Nummer *#06# \line Motorola V 3690
Secret Codes \line IMEI Nummer *#06# \line ** Das Zeichen [] erhalten Sie, indem Sie
die *-Taste l?nger gedr\'fcckt halten
\line\line
////////////////////////////////////////////////////////////////////////////////////////////////////////\line\line
NEC\line IMEI *#06# \line Version * # 2820 # \line hardware reset *73738# (send?) \line
Lock info * # 3210 # (send?) - SP lock \line * # 8140 # (send?) - Net lock \line SIM
LOCK \line *#4960 # (send?) - info \line *4960*pass*pass#(send?) -lock \line
#4960*pass#(send?) -unlock \line pass is 8 digits\line\line Lock Status * # 3210 # (send?)
- SP lock \line * # 8140 # (send?) - Net lock \line code for repair n21 n22 n223\line
*#3727372#\line Nokia\line Nokia 1610 Secret Codes \line IMEI Nummer *#06# \line
Software Version *#170602112302# \line 1. Zeile Software Version \line 2. Zeile Datum
der Software \line 3. Zeile Typ des Telefons \line Nokia 2010 Secret Codes \line IMEI
Nummer *#06# \line Software Version *#9999# \line 1. Zeile Software Version \line 2.
Zeile Datum der Software \line 3. Zeile Typ des Telefons \line Nokia 2110 Secret
Codes \line IMEI Nummer *#06# \line Software Version *#9999# \line 1. Zeile Software
Version \line 2. Zeile Datum der Software \line 3. Zeile Typ des Telefons \line Nokia
2110e Secret Codes \line IMEI Nummer *#06# \line Software Version *#170602112302#
\line 1. Zeile Software Version \line 2. Zeile Datum der Software \line 3. Zeile Typ des
Telefons \line Firmware-Datum *#3283# bzw. *#DATE# \line Nokia 2110j Secret Codes
\line IMEI Nummer *#06# \line Software Version *#682371158412125# \line 1. Zeile
Software Version \line 2. Zeile Datum der Software \line 3. Zeile Typ des Telefons \line
Firmware-Datum *#3283# bzw. *#DATE# \line Nokia 3110 Secret Codes \line IMEI
Nummer *#06# \line Software Version *#0000# bzw. *#9999# bzw. *#3110# \line 1.
Zeile Software Version \line 2. Zeile Datum der Software \line 3. Zeile Typ des
Telefons \line Werkseinstellungen *#7780# \line Simlock info *#92702689# \line Nokia
3210 Secret Codes \line IMEI Nummer *#06# \line Software Version *#0000# \line 1.
Zeile Software Version \line 2. Zeile Datum der Software \line 3. Zeile Typ des
Telefons \line Servicemen\'fc *#92702689# \line 1. Seite IMEI \line 2. Seite
Herstellungsdatum \line 3. Seite Kaufdatum \line 4. Seite Letzte Reparatur/Upgrade \line
5. Seite Transfer User Data \line EFR de/aktivieren *#3370# \line Half Rate de/aktivieren
*#4720# \line Testmodus aktivieren *#746025625# \line Nokia 5110 Secret Codes \line
IMEI Nummer *#06# \line Software Version *#0000# \line 1. Zeile Software Version
\line 2. Zeile Datum der Software \line 3. Zeile Typ des Telefons \line Servicemen\'fc
*#92702689# \line 1. Seite IMEI \line 2. Seite Herstellungsdatum \line 3. Seite
Kaufdatum \line 4. Seite Letzte Reparatur/Upgrade \line 5. Seite Transfer User Data \line
EFR de/aktivieren *#3370# \line Half Rate de/aktivieren *#4720# \line Testmodus
aktivieren *#746025625# \line Provider lock status *#pw+1234567890+1 \line Network
lock status #pw+1234567890+2 \line Provider lock status #pw+1234567890+3 \line
SimCard lock status #pw+1234567890+4 \line Nokia 5120 Secret Codes \line IMEI
Nummer *#06# \line Software Version *#0000# \line 1. Zeile Software Version \line 2.
Zeile Datum der Software \line 3. Zeile Typ des Telefons \line Servicemen\'fc
*#92702689# \line 1. Seite IMEI \line 2. Seite Herstellungsdatum \line 3. Seite
Kaufdatum \line 4. Seite Letzte Reparatur/Upgrade \line 5. Seite Transfer User Data \line
EFR de/aktivieren *#3370# \line Half Rate de/aktivieren *#4720# \line Testmodus
aktivieren *#746025625# \line Provider lock status *#pw+1234567890+1 \line Network
lock status #pw+1234567890+2 \line Provider lock status #pw+1234567890+3 \line
SimCard lock status #pw+1234567890+4 \line Nokia 5130 Secret Codes \line IMEI
Nummer *#06# \line Software Version *#0000# \line 1. Zeile Software Version \line 2.
Zeile Datum der Software \line 3. Zeile Typ des Telefons \line Servicemen\'fc
*#92702689# \line 1. Seite IMEI \line 2. Seite Herstellungsdatum \line 3. Seite
Kaufdatum \line 4. Seite Letzte Reparatur/Upgrade \line 5. Seite Transfer User Data \line
EFR de/aktivieren *#3370# \line Half Rate de/aktivieren *#4720# \line Testmodus
aktivieren *#746025625# \line Provider lock status *#pw+1234567890+1 \line Network
lock status #pw+1234567890+2 \line Provider lock status #pw+1234567890+3 \line
SimCard lock status #pw+1234567890+4 \line Nokia 5190 Secret Codes \line IMEI
Nummer *#06# \line Software Version *#0000# \line 1. Zeile Software Version \line 2.
Zeile Datum der Software \line 3. Zeile Typ des Telefons \line Servicemen\'fc
*#92702689# \line 1. Seite IMEI \line 2. Seite Herstellungsdatum \line 3. Seite
Kaufdatum \line 4. Seite Letzte Reparatur/Upgrade \line 5. Seite Transfer User Data \line
EFR de/aktivieren *#3370# \line Half Rate de/aktivieren *#4720# \line Testmodus
aktivieren *#746025625# \line Provider lock status *#pw+1234567890+1 \line Network
lock status #pw+1234567890+2 \line Provider lock status #pw+1234567890+3 \line
SimCard lock status #pw+1234567890+4 \line Nokia 6110 Secret Codes \line IMEI
Nummer *#06# \line Software Version *#0000# \line 1. Zeile Software Version \line 2.
Zeile Datum der Software \line 3. Zeile Typ des Telefons \line Servicemen\'fc
*#92702689# \line 1. Seite IMEI \line 2. Seite Herstellungsdatum \line 3. Seite
Kaufdatum \line 4. Seite Letzte Reparatur/Upgrade \line 5. Seite Transfer User Data \line
EFR de/aktivieren *#3370# \line Half Rate de/aktivieren *#4720# \line Testmodus
aktivieren *#746025625# \line Nokia 6130 Secret Codes \line IMEI Nummer *#06# \line
Software Version *#9999# \line 1. Zeile Software Version \line 2. Zeile Datum der
Software \line 3. Zeile Typ des Telefons \line Servicemen\'fc *#92772689# \line 1. Seite
IMEI \line 2. Seite Herstellungsdatum \line 3. Seite Kaufdatum \line 4. Seite Letzte
Reparatur/Upgrade \line 5. Seite Transfer User Data \line 6. Seite insgesamte bisherige
Telefonzeit (min) \line EFR de/aktivieren *#3370# \line Half Rate de/aktivieren
*#4720# \line Testmodus aktivieren *#746025625# \line Nokia 6150 Secret Codes \line
IMEI Nummer *#06# \line Servicemen\'fc *#92702689# \line 1. Seite IMEI \line 2. Seite
Herstellungsdatum \line 3. Seite Kaufdatum \line 4. Seite Letzte Reparatur/Upgrade \line
5. Seite Transfer User Data \line EFR de/aktivieren *#3370# \line Half Rate de/aktivieren
*#4720# \line Testmodus aktivieren *#746025625# \line Nokia 7110 Secret Codes \line
IMEI Nummer *#06# \line Servicemen\'fc *#92702689# \line 1. Seite IMEI \line 2. Seite
Herstellungsdatum \line 3. Seite Kaufdatum \line 4. Seite Letzte Reparatur/Upgrade \line
5. Seite Transfer User Data \line Nokia 8110 Secret Codes \line IMEI Nummer *#06#
\line Software Version *#8110# \line 1. Zeile Software Version \line 2. Zeile Datum der
Software \line 3. Zeile Typ des Telefons \line Servicemen\'fc *#92702689# \line 1. Seite
IMEI \line 2. Seite Herstellungsdatum \line 3. Seite Kaufdatum \line 4. Seite Letzte
Reparatur/Upgrade \line 5. Seite Transfer User Data \line Testmodus aktivieren
*#746025625# \line Nokia 8148 Secret Codes \line IMEI Nummer *#06# \line
Tastensperre MENU + * \line Lautlos MENU + # \line Nokia 8810 Secret Codes \line
IMEI Nummer *#06# \line Software Version *#0000# \line 1. Zeile Software Version
\line 2. Zeile Datum der Software \line 3. Zeile Typ des Telefons \line Seriennummer
*#92702689# \line 1. Screen Herstellungsdatum \line 2. Screen IMEI \line 3. Screen
Kaufdatum \line 4. Screen Letzte Reparatur \line Nokia 9000 Secret Codes \line IMEI
Nummer *#06# \line Software Version *#682371158412125# \line 1. Zeile Software
Version \line 2. Zeile Datum der Software \line 3. Zeile Typ des Telefons \line Firmware-
Datum *#9999# \line Nokia PT11 Secret Codes \line IMEI Nummer *#06# \line Software
Version *#9999# \line 1. Zeile Software Version \line 2. Zeile Datum der Software \line
3. Zeile Typ des Telefons \line Nokia PT11NF Secret Codes \line IMEI Nummer *#06#
\line Software Version *#170602112302# bzw. *#682371158412125# \line 1. Zeile
Software Version \line 2. Zeile Datum der Software \line 3. Zeile Typ des Telefons \line
Firmware-Datum *#3283# \line Panasonic\line
GD55/G50/G51/G70/A100/A101/A102/X300: with or w/o SIM press *#369# and go to
menu ?\'b0SW Version?\'b1\line - GD67/GD87/X60/X66/X100/X200/X400/X500: with
SIM press *#9999# while phone searching for network\line - X200 : with SIM press #02#
while phone searching for network \line - X6X : Power on the phone with valid sim card
and tape this code : 52824** \line then tape 746, Menu, Menu then enter your code \par
Philips\line PHILIPS DIGA *#06# IMEI \line *#3333*# Blocking list \line *#2558*# All
time connected \line *#3377*# IMEI,FLAGS,SIM LOCK \line *#7489*# Security
code ??? \line *#3353*# clear Blocking List \line PHILIPS FIZZ *#06# IMEI \line
*#8377*# Software version \line *#1234*# Security code \line *#5644*# Service code
\line PHILIPS SPARK *#06# IMEI \line *#2254*# Status register \line *#2255*# Some
kind of monitor mode during dialing. \line *#2558*# Time connected to net. \line
*#2562*# ??? number of reconnections \line *#2565*# Warm restart \line *#3333*#
BLOCKINGLIST \line *#2377*# ???BERR Phone waits random time and reconnects to
network. \line *#3377*# Information, SIM-lock \line *#7378*# SIM info \line *#7489*#
SECURITY CODE \line *#7693*# Sleep mode \line *#7948*# Turn off phone \line
*#8463*# Information on sleep mode \line PHILIPS GENIE *#06# IMEI \line *#2254*#
STATUS REGISTER \line *#2255*# Some kind of monitor mode during dialing. \line
*#2377*# ???BERR reconnect? \line *#2355*# Near Cell Mode. U can see parameters of
three nearest cells \line *#2558*# Time connected \line *#2562*# number of
reconnections \line *#2565*# Warm restart \line *#2772*# Base Station Paging
Multiframe. \line *#2847*# HIDDEN MENU!: 5.5:Closed User Groups \line *#3333*#
BLOCKING - list \line *#3353*# clears Blocking list \line *#3377*# SIM LCK \line
*#4263*# Hs-OK:0 KO:0 , HNS-OK:0 KO:0 \line *#4377*# ??? battery charging ???
\line *#7378*# SIM phase \line *#7489*# Security code \line *#7693*# SLEEP-mode
\line *#7948*# Turn off \line Samsung\line E710/715\line *#32436837# DAI ON Digital
Audio Interference On\line *#3243948# DAI OFF Digital Audio Interference Off\line
*#9324# MONITOR\line *#0746# SSMS MEMORY:20\line *#0842# vibra on\line
*#0289# buzzer on\line *#4357# HELP (4357) This screen!!!!!!!\line *#7777# verze
SW\line *#8888# verze HW\line *#9999# Revize HW\line *#0782# cas provozu, zapnit?
a vypnit? - LIVE TIMER\line *#0523# 41 (80) menu: 12\line *#0638# SIM: f23003
F230 030\line *#0778# SST size: 10\line *#9273696# Java D/L setting\line *#92782#
Wap user agent\line *#9998*5646# change operator logo at startup\line *#9998*76#
production number\line *#9998*968# view melody for alarm - YAMAHA OK\line
*#0778# Sim Service table\line *#9998*523# or *#9998*0523# or *#0523# Display
Contrast\line *#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos\line
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)\line E700/S500
100%..... X100/X600???!!!???\line #*566335# Wap model ID\line #*5663352# java
model\line #*5663351# model\line #*53696# java download mode\line #*536963# serial
enabl others disabled\line #*536962# HTTP enabl WAPSAR disabled\line #*536961#
WAPSAR enabl HTTP dis\line *663867 MF file dumped\line *335 All MMS mes
deled\line *2767*77667# Spain MMS settings\line *2767*78667# Portugal\line
*2767*65667# Netherland\line *2767*29667# Czech\line *2767*28667# Austria\line
*2767*48667# Italy\line *2767*37667# France\line *2767*85667# Uk\line
*2767*33667# Germany\line *2767*73738927# MMS Reset????\line *2767*77927#
Spain WAP Setting are applied\line *2767*78927# Portugal\line *2767*29927#
Czech\line *2767*65927# Netherlands\line *2767*28927# Austria\line *2767*37927#
France\line *2767*48927# Italy\line *2767*85927# Uk\line *2767*33927#
Germany\line #7263867# Ram Dump On\line #*3232# Current Mode - DCD mode\line
#*3231# DCD en TRACE dis\line #*3230# TRACE en DCD dis\line
#*7247# ??????\line #*3683# ??????\line #*3777# ??????\line #*3779# ??????\line
#*8645# ??????\line #*6428# MIC measuremnt CMD: Set, DSPMTCV11, MICHDW in
cihard. opt\line #*6422# MIC dep RXdata CMD: Set, DSPMTCV11, MICHDW in
cihard. opt\line #*6421# MIC on CMD: Set, DSPMTCV11, MICHDW in cihard. opt\line
#*6420# MIC off CMD: Set, DSPMTCV11, MICHDW in cihard. opt\line *#7465625#
Stav z?mku\line #7465625*28746# Aktivn? z?mek deaktivov?n\line *7465625*28746#
Automatick? z?mek perzonalizov?n\line #7465625*2827# Z?mek Auto CP deaktivov?
n\line *7465625*2827# Z?mek s?te se mus? aktivovat\line #7465625*2877# Z?mek
Auto SP deaktivov?n\line *7465625*2877# Z?mek s?te se mus? aktivovat\line
#7465625*28782# Automatick? z?mek podskupiny deaktivov?n\line *7465625*28782#
Z?mek s?te se mus? aktivovat\line #7465625*28638# Automatick? z?mek s?te
deaktivov?n\line *7465625*28638# Automatick? z?mek s?te perzonalizov?n\line
#7465625*228# Aktivn? z?mek deaktivov?n\line *7465625*228# Aktivn? z?mek
perzonalizov?n\line #7465625*746* ???????\line *7465625*746* ???????\line
#7465625*27* ???????\line *7465625*27* ???????\line #7465625*77* ???????\line
*7465625*77* ???????\line #7465625*782* ???????\line *7465625*782* ???????\line
#7465625*638* ???????\line *7465625*638* ???????\line *#8377466# SW + HW
info\line *#8888# HW info\line *#9999# SW info\line *#8999*8376263# komplet
info\line *#8999*636# IPD info\line #*2677# ARM state: None\line #*0000# ??????\line
*#8999*324# Net monitor??\line #*6200#\line #*6700#\line #*6900#\line #*7200#
neplatn? ?roven pr?stupu\line #*6100# command #*6100# Executed\line *2767*3700#
SGH-E700 BSI\line *2767*7100# SGH-S100\line *2767*8200# SGH-V200\line
*2767*7300# SGH-S300\line #0111*codigo#\line *2767*637#\line *2767*688#\line
*2767*wap#\line *2767*media#\line *2767*mms#\line *2767*226372# Camera
Reset\line *2767*688# MEP off\line *2767*927# WAP \line *2767*2878# E2P Custom
reset\line *2767*3855# E2P Full reset\line *2767*2878# Sec reset\line #*7828# C???
Midi Ri51\line #*5111# PI 0813 33 99 MSI 7 NA 0 18 P99 T00 CffHff\line #*2562#
nejakej reset\line #*2565# no blocking General Defense\line #*3353# General defense
Code Erased\line #*3837# reset ???????\line #*3849# reset ???????\line #*3851#
reset ???????\line #*3876# reset ???????\line #*7337# reset ???????\line #*5376# reset
All SMS Deleted\line #*7222# Operation Typ: Class C GSM\line #*7224# Error!!!!\line
#*7252# Operation Typ: Class B GSM\line #*7271# multi Slot Class 1 GPRS\line
#*7274# multi Slot Class 4 GPRS\line #*2787# CRTP on - Batery options\line #*3737#
L1 AFC DeltaF -36 NbAfcCorr 0 AdjustFoi 0 CumFoi 0\line #*3825# Command
#*3825# Executed\line #*5133# L1 HO Data Async HO 83 Sync HO 0 HO Fail 0 TCH
40\line #*7288# GPRS Detached\line #*7287# GPRS Detached\line #*7666# SrCell data
RAC 255 NMO 255\line #*7693# Sleep Deact\line #*7284# Class B\line #*2256# Calibr
- info\line #*2286# DATAbattery\line #*2527# GPRS switching set to class 4\line
#*2679# Copycat feat. Activated\line #*3940# External looptest 9600bps not avalible in
SYSOL2!\line #*4263# handsfree mode Activated\line #*4700# Half rate deact\line
#*7352# BVMC Reg vaule Set BMVC to 00H For Cmd set DEBUGBATTERY in
cihard.opt\line #*8462# Sleeptime sinc SwitchOf \line #*2558# Time ON For Cmd set
DEBUGBATTERY in cihard.opt\line #*3370# EFR Deact\line #*3941# External
looptest 115200bps not avalible in SYSOL2!\line #*5176 L1 Sleep TOI N:5 TOI P:0\line
#*7462# SIM phase 3\line #*7983# Voltage/Freg Deact\line #*7986# Voltage
Activated\line #*8466# Old time \line #*2255# Call failed mode: Command not
Implemented\line #*2285 nic\line #*46539 nic\line #*5143 nic\line #*7629 nic\line
#*7646 nic\line #*7665 nic\line #*7633 nic\line #*7626 nic\line #*5174 nic\line #*5175
nic\line #*5177 nic\line #*5156 nic\line #*2282 nic\line #*5132 nic\line #*7276 nic\line
#*2355 nic\line #*3333 nic\line #*3377 nic\line #*5187# L1C2G trace Activated\line
#*6837# Official SW version: 120107A1\line #*7524# KCGPRS: +data\line #*7562#
LOCI GPRS: +data\line #*7638# RLC allwazs open ended TBF Actiated\line #*7632#
Sleep mode Debug: +data\line #*7673# Sleep mode RESET\line #*2337# Permanent
Registrtion Beep: NOT YET IMPLEMENTED\line #*2474# For Cmd set
DEBUGBATTERY in cihard.opt\line #*2834# Audio Pth Mobile Normal\line #*3270#
DCS support Deact\line #*3282# Data Deact\line #*3476# EGSM Deact\line #*3676#
falh volume formated\line #*4674# IMSI: +data\line #*4760# GSM Activated\line
#*4864 pro tento model nic\line #*5171 data\line #*5172 data\line #*5173 data\line
#*7326# Accessorz: vibrator\line #*7676# Command #*7676# Executed\line #*7683#
Sleep variable\line #*7762# SMS Bearer CS Activated\line #*7957# Command #*7957#
Executed\line #*8465# Time in L1 +data\line #*9278# Command #*9278# Executed\line
#*9795# WTLS key Reset\line #*2252# Current call: +data\line #*2836# AVDDSS
Managment Deact.\line #*3877# Dump of SPY trace: +data\line #*7728# RSAV
done\line sharp reset EEP \line 1, push at once key 0+3+right option key up+red key
(white screen)\line 2, in sequence push key 0,1,2,3, right option key up,1 (service
menu)\line 3, write 99 and push right option key up\line 4, write 01 and push right option
key up (now start RESET EEPROM)\line Wait.....\line 5, push any key\line 6, push blue
key menu (save)\line 7, power off\line Sharp GX-10 unlock solution \line With Sim Card
(of locked network) in phone: \line *01763*6371# and press M. \line In menu go to:
SETTINGS->SELECT->SECURITY \line then in Security menu:MEP LOCKS-
>SELECT \line insert default security code 0000 \line In menu go to NETWORK and
choose DEACTIVATE \line press SELECT and insert 812664697614 \line Press OK,
phone anwser will be: \line Sony-Ericssion\line *#06# Imei Number.\line >*<<*<*
Software version.\line *#0000# Default English. \cf0\par
\par
\pard\f1\fs20\par
}