Mobile Tutorials en Delphi Berlin

Mobile Tutorials
RAD Studio 10.1 Berlin
2016 Embarcadero Technologies, Inc. Embarcadero, the Embarcadero

Technologies logos, and all other Embarcadero Technologies product or service
names are trademarks or registered trademarks of Embarcadero Technologies,
Inc. All other trademarks are property of their respective owners.
Embarcadero Technologies, Inc. is a leading provider of award-winning tools for
application developers and database professionals so they can design systems
right, build them faster and run them better, regardless of their platform or
programming language. Ninety of the Fortune 100 and an active community of
more than three million users worldwide rely on Embarcadero products to
increase productivity, reduce costs, simplify change management and
compliance, and accelerate innovation. The company's flagship tools include:
Embarcadero Change Manager, Embarcadero RAD Studio, DBArtisan,
Delphi, ER/Studio, JBuilder, and Rapid SQL. Founded in 1993, Embarcadero
is headquartered in Austin, with offices located around the world. Embarcadero
is online at www.embarcadero.com.
April, 2016
Embarcadero Technologies
CONTENTS
Mobile Tutorials: Mobile Application Development (iOS and Android) ................. 12
Setup ................................................................................................................................. 12
Using Basic User Interface Elements ............................................................................. 13
Using Device Functionality ............................................................................................ 15
Using Backend as a Service .......................................................................................... 16
Accessing a Database .................................................................................................. 17
See Also......................................................................................................................... 17
Mobile Tutorial: Set Up Your Development Environment on the Mac (iOS) .......... 18
Requirements on the Mac and iOS .......................................................................... 18
Steps to Configure Your Mac to Run Your iOS Application .................................. 19
Step 1: Install the Platform Assistant ...................................................................... 19
Step 2: Run the Platform Assistant ......................................................................... 20
Step 3: Install Xcode on the Mac .......................................................................... 21
Next Steps ................................................................................................................. 22
Additional Steps to Configure Your Mac to Run Your iOS Application on Your iOS
Device............................................................................................................................... 22
Step 1: Make Sure that the Xcode Command Line Tools Are Installed on Your
Mac ............................................................................................................................... 23
Step 2: Sign Up for a Developer Account ............................................................... 24
Step 3: Request, Download and Install Your Development Certificate ............. 24
Request, Download and Install Your Certificate ................................................ 25
Step 4: Register Your Device for Deployment......................................................... 26
Step 5: Create and Install a Provisioning Profile ..................................................... 27
See Also......................................................................................................................... 28
Mobile Tutorial: Set Up Your Development Environment on Windows PC (iOS) ... 29
Setting Up Your RAD Studio Environment ................................................................ 30
Create a Connection Profile for the Mac ........................................................... 30
Add an SDK to the Development System for the iOS Device Connected to
the Mac..................................................................................................................... 33
See Also......................................................................................................................... 35
Mobile Tutorial: Set Up Your Development Environment on Windows PC
(Android) .......................................................................................................................... 36
See Also......................................................................................................................... 36
Mobile Tutorial: Creating an Application for Mobile Platforms (iOS and Android)
........................................................................................................................................... 37
Before You Start ........................................................................................................... 37
Step 1: Create a New FireMonkey Application for Android or iOS ..................... 38
Step 2: Select a Style................................................................................................... 39
Step 3: Place Components on the Multi-Device Form .......................................... 39
Step 4: Adding Views to Your Project....................................................................... 43
Step 5: Write an Event Handler for a Button Click by the User ............................. 43
Step 6: Test Your Mobile Application ........................................................................ 44

Test Your Android Application on the Android Device ..................................... 45
Test Your iOS Application ....................................................................................... 46
See Also......................................................................................................................... 48
Mobile Tutorial: Using an Address Book Component (iOS and Android) ............... 49
Basic Features of the TAddressBook Component .................................................. 50
Creating a Sample Application ................................................................................ 50
Designing the User Interface.................................................................................. 50
Retrieving the Contacts List ................................................................................... 54
Implementing the Control Elements Functionality ............................................. 56
Keeping Address Book in Sync .............................................................................. 60
Configuring Access to Address Book ................................................................... 61
Running the Sample Application .............................................................................. 63
See Also......................................................................................................................... 66
Code Samples.......................................................................................................... 66
Mobile Tutorial: Using a Button Component with Different Styles (iOS and
Android)............................................................................................................................ 67
Buttons in Mobile Platforms ........................................................................................ 67
Define the Look and Feel for a Button Component .............................................. 69
Using TintColor and IconTintColor on Buttons ..................................................... 71
Using Styled and Colored Buttons on Target Platforms ..................................... 72
Customizing Buttons with Styles ............................................................................. 72
Placing an Image over a Button ........................................................................... 73
Create a Segmented Control Using Button Components ................................... 74
Create a Scope Bar on a Toolbar Component ..................................................... 76
Important Differences Between a TButton and TSpeedButton ............................ 77
See Also......................................................................................................................... 77
Using Styled and Colored Buttons on Target Platforms ............................................. 79
See Also......................................................................................................................... 82
Mobile Tutorial: Using a Calendar Component to Pick a Date (iOS and Android)
........................................................................................................................................... 83
Calendar in Mobile Platforms .................................................................................... 83
Implementing an Event Handler for User Changes to the Date .......................... 85
See Also......................................................................................................................... 87
Samples ..................................................................................................................... 87
Mobile Tutorial: Using Combo Box Components to Pick Items from a List (iOS and
Android)............................................................................................................................ 88
Implementing a Picker in Multi-Device Applications ............................................. 88
Building a List of Items Using Code ........................................................................... 91
Displaying a Specific Item.......................................................................................... 91
Implementing an Event Handler for the User's Selection ...................................... 93
See Also......................................................................................................................... 95
Samples ..................................................................................................................... 95
Mobile Tutorial: Using a Map Component to Work with Maps (iOS and Android)
........................................................................................................................................... 96
Basic Features of the TMapView Component ........................................................ 97
Creating a Sample Application ................................................................................ 97
Configuring Android Applications to Use the TMapView component ........... 97
Designing the User Interface.................................................................................. 97
Running the Sample Application ............................................................................ 102
See Also....................................................................................................................... 104
Code Samples........................................................................................................ 104
Configuring Android Applications to Use Google Maps ........................................ 105
Getting the Google Maps API key ......................................................................... 105
Retrieving Your Application Certificate ............................................................. 105
Creating an API Project in the Google APIs Console ...................................... 107
Requesting a Maps API Key ................................................................................. 107
Configuring Specific Project Options ..................................................................... 108
See Also....................................................................................................................... 110
Code Samples........................................................................................................ 110
Mobile Tutorial: Using a MultiView Component to Display Alternate Views of
Information (iOS and Android).................................................................................... 111
About the TMultiView Component......................................................................... 111
Master Pane Presentation Modes ....................................................................... 113
Designing the User Interface ................................................................................... 120
Designing the Master Pane .................................................................................. 120
Designing the Detail Pane.................................................................................... 121
Implementing the Camera Buttons Functionality ............................................ 121
Setting the TMultiView Component Properties ................................................. 126
Running the Example Application .......................................................................... 126
Mobile Product Samples that Use TMultiView ....................................................... 127
See Also....................................................................................................................... 127
Mobile Tutorial: Using the Web Browser Component (iOS and Android) ............ 128
Design the User Interface ......................................................................................... 129
Write an Event Handler to Open a Web Page when the User Changes the URL
in the Edit Control ...................................................................................................... 132
Implement a Common Method to Open a Web Page .................................. 133
Implement an Event Handler for the OnChange Event ................................. 134
Implement an Event Handler for the Back Button ........................................... 135
Selecting the Proper Virtual Keyboard for the Web Browser Application ....... 136
WebBrowser Mobile Code Snippet ........................................................................ 138
See Also....................................................................................................................... 138
Mobile Tutorial: Using Tab Components to Display Pages (iOS and Android) .... 139
Using the Native Style for Tabs on iOS and Android ........................................ 139
Designing Tab Pages Using the Form Designer .................................................... 140
Comparing the Tab Settings on iOS and Android ............................................ 146
Using Custom Multi-Resolution Icons for Your Tabs .............................................. 151
Displaying Multi-Resolution Custom Icons on Tabs ........................................... 152

Using a Single-Resolution Bitmap for a Custom Icon ....................................... 155
Defining Controls within a TabControl ................................................................... 157
Changing the Page at Run Time ............................................................................ 159
By the User Tapping the Tab ................................................................................ 159
By Actions and an ActionList ............................................................................... 159
By Source Code ..................................................................................................... 165
See Also....................................................................................................................... 167
Samples ................................................................................................................... 167
Mobile Tutorial: Using LiveBindings to Populate a ListView (iOS and Android) ... 168
Step 1: Creating the Project .................................................................................... 168
Step 2: Adding Fields ................................................................................................ 170
Step 3: Creating LiveBindings .................................................................................. 171
Step 4: Adding More Fields (Bitmaps, Currency) .................................................. 173
Step 5: Adding the onButtonClick Event Handler ................................................ 175
The Results................................................................................................................... 175
See Also....................................................................................................................... 177
Mobile Tutorial: Using ListBox Components to Display a Table View (iOS and
Android).......................................................................................................................... 178
Using ListBox Components to Display a Table View in Mobile Platforms .......... 178
Plain List ................................................................................................................... 178
Grouped List ........................................................................................................... 179
Search Box .............................................................................................................. 180
Create Items on the ListBox Component .............................................................. 181
Add a Header ........................................................................................................ 183
Add a Group Header/Footer to the List............................................................. 184
Show List Items as Separate Grouped Items ..................................................... 186
Add a Check Box or Other Accessory to a ListBox Item ................................. 186
Add an Icon to a ListBox Item .............................................................................. 187
Add Detail Information to an Item ...................................................................... 187
Running Your Application .................................................................................... 188
Create Your ListBox Application ............................................................................. 188
Add Items to a ListBox from Your Code ............................................................. 189
Create an Overflow Menu ................................................................................... 192
Creating the Event Handler for the Overflow Button ...................................... 194
Add a Search Box.................................................................................................. 195
Running Your Application .................................................................................... 195
See Also....................................................................................................................... 196
Mobile Tutorial: Using LiveBindings to Populate a ListBox in Mobile Applications
(iOS and Android) ......................................................................................................... 197
Step 1: Creating the Project .................................................................................... 197
Step 2: Creating the LiveBindings ........................................................................... 200
The Results................................................................................................................... 203
See Also....................................................................................................................... 204
Mobile Tutorial: Using Layout to Adjust Different Form Sizes or Orientations (iOS
and Android) ................................................................................................................. 205
Every FireMonkey Component Can Have an Owner, a Parent, and Children
...................................................................................................................................... 205
Using Common Layout-Related Properties of a FireMonkey Component ...... 205
Using the Align Property........................................................................................ 205
Using the Margins Property................................................................................... 207
Using the Padding Property ................................................................................. 207
Using the Anchors Property .................................................................................. 208
Using the TLayout Component ............................................................................... 210
See Also....................................................................................................................... 210
Mobile Tutorial: Taking and Sharing a Picture, and Sharing Text (iOS and Android)
......................................................................................................................................... 211
Topics .......................................................................................................................... 214
See Also....................................................................................................................... 214
Taking and Sharing Pictures and Text Using Action Lists ......................................... 215
Building the User Interface for the Application .................................................... 215
Taking a Picture with a Mobile Device Camera .................................................. 216
Saving a Picture to the Device Photo Library ....................................................... 218
Using a Picture from the Mobile Device Photo Library ........................................ 219
Enabling Image Editing ............................................................................................ 220
Sharing or Printing a Picture ..................................................................................... 222
Sharing Text ................................................................................................................ 224
See Also....................................................................................................................... 226
Samples ................................................................................................................... 226
Taking Pictures Using FireMonkey Interfaces ............................................................ 227
Building the User Interface for Your Application .................................................. 227
Taking a Picture with a Device Camera ............................................................... 228
Running the Application....................................................................................... 231
Saving a Picture to the Device Photo Library ................................................... 231
Selecting a Picture from the Device Photo Library .............................................. 232
See Also....................................................................................................................... 234
Mobile Tutorial: Using Location Sensors (iOS and Android) .................................... 235
Design the User Interface ......................................................................................... 236
The Location Sensor .................................................................................................. 237
Read Location Information (Latitude, Longitude) from the LocationSensor
Component................................................................................................................ 238
Show the Current Location Using Google Maps via a TWebBrowser
Component................................................................................................................ 239
Use Reverse Geocoding .......................................................................................... 240
Show a Readable Address in the ListBox Component ........................................ 243
Describing Why Your Application Needs the User Location .............................. 244
See Also....................................................................................................................... 245
Samples ................................................................................................................... 245
Mobile Tutorial: Using Notifications (iOS and Android)............................................ 246

Three Basic Notification or Alert Styles ................................................................... 246
Notification Banner on Mobile Devices ............................................................. 246
Alert Dialogs: iOS Badge Number and Android Notification Number .......... 246
Notification Center on Mobile Devices ................................................................. 247
Access the Notification Service .............................................................................. 247
Add FMLocalNotificationPermission (iOS) ............................................................. 248
Set the Icon Badge Number and Notification Number from Code ................. 249
Schedule Notification ............................................................................................... 251
Repeat a Notification Message .............................................................................. 253
Update or Cancel a Scheduled or Repeated Notification Message .............. 255
Present the Notification Message Immediately ................................................... 256
Customizing the Notification Sound ....................................................................... 258
Notification Banner or Notification Alert ................................................................ 262
Add Action to the Notification Alert (iOS Only).................................................... 263
Add Action to Notifications ..................................................................................... 265
Running the Application .......................................................................................... 266
See Also....................................................................................................................... 267
Samples ................................................................................................................... 267
Mobile Tutorial: Using Remote Notifications (iOS and Android) ............................ 268
Remote Push Notification ........................................................................................ 268
REST BAAS framework ............................................................................................... 269
Topics in this Mobile Tutorial ..................................................................................... 269
See Also....................................................................................................................... 269
Code Samples........................................................................................................ 269
Multi-Device Application to Receive Push Notifications ........................................ 270
Design and Set Up the User Interface .................................................................... 270
Creating the Event Handlers ................................................................................... 275
Android Settings......................................................................................................... 278
Project Settings ....................................................................................................... 278
iOS Settings ................................................................................................................. 279
Project Settings ....................................................................................................... 279
Running Your Application on a Mobile Device .................................................... 279
See Also....................................................................................................................... 283
Code Samples........................................................................................................ 283
Mobile Tutorial: Using the Phone Dialer on Mobile Devices (iOS and Android) .. 284
About the Phone Dialer Services on Mobile Devices .......................................... 284
Accessing the Phone Dialer Services ..................................................................... 284
Designing the User Interface ................................................................................... 286
Getting the Carrier Properties ................................................................................. 287
Running the Application....................................................................................... 288
Making a Call ............................................................................................................. 289
Detecting the Call State Changes ......................................................................... 292
Implementing the OnCallStateChanged Event Handler................................ 292
See Also....................................................................................................................... 296

Samples ................................................................................................................... 296
Mobile Tutorial: Using BaaS for Backend Storage (iOS and Android) ................... 297
Getting Your App Ready in Kinvey and Parse ...................................................... 298
Design and Set Up of the User Interface ............................................................... 298
Adding the Backend Components ........................................................................ 299
Creating and Storing Objects ................................................................................. 301
Deleting Objects........................................................................................................ 302
Retrieving Objects ..................................................................................................... 304
Running Your Application ........................................................................................ 308
See Also....................................................................................................................... 309
Code Samples........................................................................................................ 309
Mobile Tutorial: Using InterBase ToGo with dbExpress (iOS and Android) ........... 310
Using dbExpress to Connect to the Database ..................................................... 311
Connecting to the Data .......................................................................................... 313
Deploying Your Application to Mobile .................................................................. 316
Deploy InterBase ToGo, dbExpress Driver, and the Database File to Mobile
.................................................................................................................................. 316
Modify Your Code to Connect to a Local Database File on Mobile ............ 319
Run Your Application on a Simulator or on a Mobile Device ............................ 321
Troubleshooting ......................................................................................................... 322
InterBase Issues ....................................................................................................... 322
Exception Handling Issues .................................................................................... 322
See Also....................................................................................................................... 323
Mobile Tutorial: Using InterBase ToGo with FireDAC (iOS and Android) ............... 324
Using FireDAC to Connect to the Database ........................................................ 326
Deploying your Application to Mobile................................................................... 332
Deploying InterBase ToGo Required Files and the Database File to Mobile332
Run Your Application on a Simulator or on a Mobile Device ............................ 337
Troubleshooting ......................................................................................................... 337
InterBase Issues ....................................................................................................... 337
Exception Handling Issues .................................................................................... 338
See Also....................................................................................................................... 339
Samples ................................................................................................................... 339
Mobile Tutorial: Using dbExpress and SQLite (iOS and Android) ........................... 340
Using dbExpress to Connect to the Database ..................................................... 341
Creating the Database in the Windows Environment for Development
Purposes ...................................................................................................................... 341
Create the Database in the Data Explorer ....................................................... 341
Create Table on DataExplorer ............................................................................ 344

Creating the Event Handler to Make the Delete Button Visible When the User
Selects an Item from the List .................................................................................... 349
Creating the Event Handler for the Add Button to Add an Entry to the List .... 350
Creating the Event Handler for the Delete Button to Remove an Entry from the
List ................................................................................................................................ 356
Setting Up Your Database Deployment for Mobile Platforms ............................ 357
Add and Configure Your Database File in the Deployment Manager ........ 358
Modifying Your Code to Connect to a Local Database File on Mobile
Platforms ..................................................................................................................... 359
Specifying the Location of the SQLite Database on the Mobile Device ..... 359
Creating a Table if None Exists ............................................................................ 360
Running Your Application on a Mobile Device .................................................... 361
See Also....................................................................................................................... 363
Mobile Tutorial: Using FireDAC and SQLite (iOS and Android)............................... 364
Creating the Database using FireDAC framework .............................................. 365
Using the LiveBindings Wizard .................................................................................. 369
Add the LiveBinding components ...................................................................... 369
Connecting to the Data ....................................................................................... 371
Displaying ShopItem in the ListView .................................................................... 373
Creating the Event Handler to Make the Delete Button Visible When the User
Selects an Item from the List .................................................................................... 373
Creating the Event Handler for the Add Button to Add an Entry to the List .... 374
Creating the Event Handler for the Delete Button to Remove an Entry from the
List ................................................................................................................................ 379
Preparing Your Application for Run Time............................................................... 380
Setting Up Your Database Deployment for mobile ............................................. 380
Modifying Your Code to Connect to a Local Database File on mobile .......... 382
Creating a Table if None Exists ............................................................................ 383
Running Your Application on a Simulator or on a Mobile Device ..................... 384
See Also....................................................................................................................... 386
Mobile Tutorial: Connecting to an Enterprise Database from a Mobile Client (iOS
and Android) ................................................................................................................. 387
Creating the Middle Tier, a DataSnap Server ....................................................... 388
Create a DataSnap Server VCL Application .................................................... 389
Define a DataSet on the DataSnap Server ....................................................... 391
Expose the DataSet from the DataSnap Server ............................................... 394
Run the DataSnap Server ..................................................................................... 395
Creating a Mobile Application that Connects to the DataSnap Server ......... 396
Deploy the MIDAS Library to iOS Simulator ........................................................... 400
10
Run Your Application on the mobile platform ...................................................... 400

See Also....................................................................................................................... 401
Mobile Tutorial: Using FireDAC in Mobile Applications (iOS and Android) .......... 402
Add the LiveBinding components ...................................................................... 404
Add the ListView component .............................................................................. 406
Preparing Your Application for Run Time............................................................... 409
Setting Up Your Database Deployment for mobile ............................................. 409
Modifying Your Code to Connect to a Local Database File on Mobile .......... 410
Running Your Application on the Simulator or on the Mobile Device .............. 412
See Also....................................................................................................................... 412
Mobile Tutorials: Table of Components Used ........................................................... 413
11
Mobile Tutorials: Mobile Application Development (iOS and Android)
Mobile Tutorials: Mobile Application

Development (iOS and Android)
This integrated set of tutorials walks you through development of a Delphi or C++
multi-device application for iOS and Android:
o
After the three initial setup tutorials, the first tutorial shows you how to
construct an iOS or Android application using FireMonkey tools.
The remaining tutorials demonstrate the recommended FireMonkey

components to use in order to achieve a native look-and-feel in your iOS
and Android applications.
These mobile tutorials are also available in PDF format here:

http://docs.embarcadero.com/products/rad_studio/radstudioBerlin/Mobile_Tuto
rials_en.pdf
Setup
Set Up Your Development Environment on the Mac

(iOS)
Set Up Your Development Environment on Windows

PC (iOS)
12
Using Basic User Interface Elements
Set Up Your Development Environment on Windows

PC (Android)
Creating a Multi-Device Application (iOS and

Android)
Using the Address Book Component (iOS and

Android)
Using a Button Component with Different Styles (iOS

and Android)
Using a Calendar Component to Pick a Date (iOS

and Android)
Using Combo Box Components to Pick Items from a

List (iOS and Android)
13
Using a Map Component to Work with Maps (iOS

and Android)
Using the MultiView Component (iOS and Android)
Using the Web Browser Component (iOS and

Android)
Using Tab Components to Display Pages (iOS and

Android)
Using LiveBindings to Populate a ListView (iOS and

Android)
Using ListBox Components to Display a Table View

(iOS and Android)
14
Using Device Functionality
Using LiveBindings to Populate a ListBox (iOS and

Android)
Using Layout to Adjust Different Form Sizes or

Orientations (iOS and Android)
Using Device Functionality
Taking and Sharing a Picture, and Sharing Text (iOS

and Android)
Using Location Sensors (iOS and Android)
Using Notifications (iOS and Android)
15
Using Backend as a Service
Mobile Tutorial: Using the Phone Dialer on Mobile

Devices (iOS and Android)
Using Backend as a Service
Mobile Tutorial: Using Remote Notifications (iOS and

Android)
Mobile Tutorial: Using BaaS for Backend Storage

(iOS and Android)
16
Accessing a Database
Accessing a Database
o
Using InterBase ToGo with FireDAC (iOS and

Android)
Using InterBase ToGo with dbExpress (iOS and

Android)
Using SQLite and FireDAC (iOS and Android)
Using SQLite and dbExpress (iOS and Android)
Connecting to an Enterprise Database from a

Mobile Client (iOS and Android)
Using FireDAC in Mobile Applications (iOS and

Android)
See Also
o
RAD Studio Mobile Tutorials (pdf)
Mobile Tutorials: Table of Components Used
FireMonkey Quick Start
Creating an iOS App
Creating an Android App
FireMonkey Application Design
Mobile Code Snippets
iOS Mobile Application Development
Android Mobile Application Development
Supported Target Platforms
Multi-Device Preview
17
Mobile Tutorial: Set Up Your Development Environment on the Mac (iOS)
Mobile Tutorial: Set Up Your

Development Environment on the
Mac (iOS)
A FireMonkey Delphi application destined for the iOS target platform can be
optionally tested on the iOS Simulator available on the Mac. FireMonkey C++
and Delphi applications can be tested using the iOS Device target platform; this
testing requires a test iOS device connected to the Mac.
o
The first half of this tutorial describes the steps that you need to perform in
order to run your iOS application (Delphi only) on the iOS Simulator on the
Mac.
The second half of this tutorial describes additional steps required in order
to run your iOS application (Delphi or C++) on your iOS Device.
Note: The iOS Simulator is not supported by BCCIOSARM, the C++ Compiler for
the iOS Device. Only iOS devices are supported by BCCIOSARM.
Requirements on the Mac and iOS

o
10.9 Mavericks
10.10 Yosemite
10.11 El Capitan
(Neither OS is supported on legacy PowerPC- and 680x0-based Macintosh

systems. All Macs since 2007 are Intel-based; all Macs since 2008 are 64-bit.)
o
For Mac OS X development, the latest version of Xcode
For iOS development, the latest version of the iOS SDK and Xcode
installed, along with the Xcode command line tools.
Note: RAD Studio does not support versions of the iOS SDK lower than 8.0.
o
Membership in the Apple Developer Program.
An iOS device connected to the Mac by USB port (required for testing or
running your iOS app on the device)
18
Steps to Configure Your Mac to Run Your iOS

Application
To deploy an iOS application to your device for debugging and testing purposes,
your system should have the configuration shown in the following figure. RAD
Studio runs on a Windows PC computer. This PC computer is connected to a
Mac running the Platform Assistant and having installed the appropriate versions
of Xcode and iOS SDK (for iOS development). To run iOS apps on an iOS device,
the iOS device should be connected via USB cable to the Mac.
To deploy an iOS application to the iOS Simulator on the Mac or to an iOS

device, you need to install the following tools on your Mac:
o
Platform Assistant (PAServer)
RAD Studio uses the Platform Assistant to run and debug multidevice applications and to deploy multi-device applications on
Mac OS X and iOS devices.
Install and run the Platform Assistant on your Mac.
Xcode
Xcode is the development and debug environment on the Mac and provides
the required development files for Mac OS X and iOS applications.
Step 1: Install the Platform Assistant

The Platform Assistant must be running on the Mac when you deploy an iOS app
from your PC to either the iOS simulator or an iOS device.
The Mac OS X installer for the Platform Assistant is named PAServer18.0.pkg and
it is available in two places:
o
Inside the RAD Studio installation directory on your PC:
C:\Program Files
(x86)\Embarcadero\Studio\18.0\PAServer\PAServer18.0.pkg
o
On the Web, for download to the Mac:
19

http://altd.embarcadero.com/releases/studio/18.0/PAServer/PAServer18.0.
pkg
For further details, see Installing the Platform Assistant on a Mac.
Step 2: Run the Platform Assistant

In the Finder on the Mac, activate the .app file (PAServer-18.0.app) as follows:
1. Navigate to the top-level Applications folder.
2. Double-click PAServer-18.0.app to start the Platform Assistant:
The Terminal window appears, displaying the Platform Assistant banner and the
password prompt:
Connection Profile password <press Enter for no password>
Either press Return, or enter a password for PAServer and then press Return.
3. Next you are prompted to enter your Mac user password to allow the
Platform Assistant to debug (take control of another process) your
application.
20
Enter your password, and select Take Control:
For more details about running the Platform Assistant, see Running the Platform
Assistant on a Mac.
Step 3: Install Xcode on the Mac

Xcode is the development and debug environment on the Mac, and provides
the required development files for Mac OS X and iOS applications.
You can install Xcode from any of the following sources:
o
On your "Mac OS X Install" DVD, under Optional Installs, double-click

Xcode.mpkg to install Xcode on your system.
At the Mac App Store, download Xcode for free.
As a registered Apple Developer, you can download the latest version of

Xcode as a bundle (.dmg). To register and then download Xcode:
1. Register (free of charge) as an Apple Developer at
http://developer.apple.com/programs/register/.
2. Download Xcode as a bundle from
https://developer.apple.com/downloads.
21
Additional Steps to Configure Your Mac to Run Your iOS Application on Your iOS Device
Next Steps
You have configured your Mac to run an iOS application on the iOS Simulator.
Note: Only Delphi applications can be run on the iOS Simulator.
C++Builder does not support the iOS Simulator.
o
iOS Simulator: To run an iOS application (Delphi only) on the iOS Simulator
on the Mac, you do not have to complete the second half of this tutorial.
Instead, you can now go on to the next tutorial (Mobile Tutorial: Set Up
Your Development Environment on Windows PC (iOS)) to complete the
configuration of your RAD Studio IDE.
iOS Device: To run your iOS application (either Delphi or C++Builder) on

your iOS Device, please use the following steps in this tutorial to complete
the configuration of your Mac. Then go on to next tutorial (Mobile Tutorial:
Set Up Your Development Environment on Windows PC (iOS)) to complete
the configuration of your RAD Studio IDE.
Additional Steps to Configure Your

Mac to Run Your iOS Application on
Your iOS Device
The following additional steps enable you to run your iOS application on your iOS
Device.
Remember that your iOS device should be connected to your Mac via USB
cable.
22
Step 1: Make Sure that the Xcode Command Line

Tools Are Installed on Your Mac
Note: Beginning with Xcode version 6.1, the Xcode Command Line Tools are
automatically installed during Xcode installation.
To make sure that the Xcode command line tools are installed on your Mac:
1. Start Xcode on the Mac.
2. Choose Preferences from the Xcode menu.
3. In the General window, click the Locations tab.

4. On the Location window, check that the Command Line Tools shows the
Xcode version (with which the Command Line Tools were installed). This
means that the Xcode Command Line Tools are already installed and you
do not need to install them.
23
5. If the Xcode Command Line Tools are not installed, the Command Line
Tools do not show the Xcode version.
1. In this case, click the Downloads tab on the Location window.
2. On the Downloads window, choose the Components tab.
3. Click the Install button next to Command Line Tools.

You are asked for your Apple Developer login during the install process.
For more details, see Installing the Xcode Command Line Tools on a Mac.
Step 2: Sign Up for a Developer Account

Membership in the Apple Developer Program is a requirement for building,
running, debugging, and deploying applications for iOS.
Follow the steps described at Joining the Apple Developer Program.
Step 3: Request, Download and Install Your

Development Certificate
Applications that are deployed on the device (or on the iOS Simulator) need to
be cryptographically signed before they run. The Development certificate
contains information that is needed for signing the applications. Each individual
(an individual developer or a team member) must have a unique development
certificate, which can be used for multiple applications.
For development teams, development certificates must be requested by each
team member, and these requests must be approved by a team admin.
24
Request, Download and Install Your Certificate

1. In the Keychain Access application on your Mac, select from the
Keychain Access menu: Certificate Assistant > Request a Certificate From
a Certificate Authority:
If you are a development team member for a

corporate/organization program, your team administrator needs to
approve your request. After your team administrator approves it,
you can download the certificate.
If you are an individual developer, you should see a download

option for your certificate shortly after you request it. See Apple
documentation at: Code Signing Guide for details.
Save the certificate request as a CSR file, and then send it to your Certificate
Authority through the iOS provisioning portal in the following way:
1. When prompted, enter your Apple ID and password, and then click
Sign In.
2. Under iOS Apps, click Certificates.
3. On the page that opens, click the plus sign (+) icon.
This opens the Add iOS Certificate wizard.
4. On the Select Type page, click Continue and follow the onscreen
instructions to proceed with the wizard.
5. When prompted, upload the CSR file that you saved on your Mac.
25
2. Go to iOS Provisioning Portal. You can download the Development

certificate clicking the Download button as shown below:
3. Launch the Development Certificate by double-clicking it. It

automatically loads in the Keychain Access application.
Step 4: Register Your Device for Deployment

Before a device can run user applications, it must be registered in the Apple
Provisioning Portal. Devices are registered by their Unique Device ID (UDID). The
UDID can be determined using Xcode, as follows:
1. Make sure your iOS device is connected to your Mac machine.
2. Open Xcode and go to Devices (Window > Devices).
3. Click on your device.
4. Next to the Identifier label is a string of characters:
The Identifier string represents your device's UDID.
If you are an individual developer, register your device by adding the

UDID in the Devices tab of the Apple Provisioning Portal.
If you are part of a company/organization, ask your team admin to

register your device.
26
Step 5: Create and Install a Provisioning Profile

Provisioning profiles are used for linking a developer and devices to a
development team. This provisioning profile is required for running applications
on an iOS device.
o
If you are an individual developer, you must create a provisioning profile.

For specific information, see: Creating and Downloading a Distribution
Provisioning Profile.
If you are part of a company/organization, your team admins must create

a provisioning profile that you can use.
After your provisioning profile is created, you must install it into Xcode, as follows:
1. Open Xcode on the Mac and go to the Devices (Window > Devices).
2. Right-click the device and select Show Provisioning Profiles
3. Click the plus sing button to add a provisioning profile.
4. Find your provisioning profile, select it and click Install.

5. Click Done to close the window.
You have configured your Mac to run your iOS application on your iOS Device.
To run your iOS application, please see Mobile Tutorial: Set Up Your Development
Environment on Windows PC (iOS) and complete the configuration of your RAD
Studio IDE. (If you have configured your PC as part of running your application
on the iOS Simulator, you can skip this step.)
27
See Also
o

(iOS)
Mobile Tutorial: Creating an Application for Mobile Platforms (iOS and

Android)
paserver, the Platform Assistant Server Application
Installing Xcode on a Mac
Installing the Xcode Command Line Tools on a Mac
Installing the Platform Assistant on a Mac
Running the Platform Assistant on a Mac
Acquiring an iOS Developer Certificate
Troubleshooting: Cannot Deploy to the iOS Device
Useful Apple Web Pages:
Creating and Configuring App IDs
Creating signing certificates (Code Signing Guide)
iOS Provisioning Portal (Requires your Apple Developer login)
Devices tab of the Apple Provisioning Portal
Create an Apple ID
Creating and Downloading a Distribution Provisioning Profile
28
Mobile Tutorial: Set Up Your Development Environment on Windows PC (iOS)

Development Environment on
Windows PC (iOS)
Before starting this tutorial, you should read and perform the following tutorial
session:
o
A FireMonkey application destined for the iOS target platform can be tested
initially on the iOS Simulator available on the Mac. The second half of the testing
process uses the iOS Device target platform and requires a test iOS device
connected to the Mac.
Note: On iOS devices, you can run both Delphi and C++ applications. However,
the iOS Simulator is not supported by BCCIOSARM, so only iOS devices are
supported for C++.
To deploy an iOS Application to your iOS device or iOS Simulator for debugging
and testing purposes, RAD Studio uses the Platform Assistant, which you must
install and run on the Mac. Your hardware and software development
environment should have the configuration demonstrated in the following figure.
RAD Studio runs on a Windows PC computer. Your PC computer should be
connected to a Mac running the Platform Assistant and having installed the
appropriate versions of Xcode and iOS SDK (for iOS development). To run iOS
apps on an iOS device, the iOS device must be connected via USB cable to the
Mac.
This section describes the steps to set up your development environment after
you configure your environment on your Mac.
29
Setting Up Your RAD Studio Environment

You need to execute the following configuration steps to prepare the iOS
development with RAD Studio.
Create a Connection Profile for the Mac

1. In the RAD Studio IDE, open Tools > Options > Environment Options >
Connection Profile Manager.
2. Click Add:
30
3. Now you see the Create a Connection Profile wizard. Define a name for
the connection profile, such as "My Mac".
Make sure you select OS X as the platform, and then click Next:
31
4. On the Remote machine information page, set the name or IP address of

the host Mac, a port number to use (the default port 64211 typically
works), and an optional password (if you want to use a password).
5. Click Test Connection, and make sure that the connection profile
succeeds with no error (you should receive the message "Connection to
<hostname> on port <portnumber> succeeded").
6. If the Test Connection succeeds, click the Finish button, otherwise check
the settings and try again.
32
Add an SDK to the Development System for the iOS Device

Connected to the Mac
1. Open Tools > Options > Environment Options > SDK Manager:
2. Click Add.
33
3. On the Add a New SDK dialog box, select iOS Device - 32 bit or iOS
Device - 64 bit as a platform.
4. After you select a platform, the IDE fills a Profile (such as "My Mac") and
SDK version combo box with the list of SDK versions available on the
machine where the Platform Assistant server is running:
5. Click OK to add the selected SDK version.

6. After the operation completes, click Close to close the dialog.
34
See Also
o

Android)
Working with a Mac and a PC
Running Your iOS Application on an iOS Device
Running Your iOS Application on the iOS Simulator
FireMonkey Platform Prerequisites
Creating an iOS App
Mac OS X Application Development
Creating a FireMonkey Application
Apple developer.apple.com pages
iOS Developer Library
iOS Developer Library: Getting Started
iOS Dev Center
Launching Your App on Devices
Preparing Your iOS App for Distribution in the App Store
iAd Network
35
Mobile Tutorial: Set Up Your Development Environment on Windows PC (Android)

Development Environment on
Windows PC (Android)
During the RAD Studio installation, the required Android development tools are
installed and configured on your system. Nothing else is required to start Android
development.
In order to be able to run applications on an Android device, you also need to:
o
Install the USB driver for your Android device
Enable USB debugging on your Android device
Configure your system to detect your Android device
See Also
o

Android)
36
Mobile Tutorial: Creating an

Application for Mobile Platforms (iOS
and Android)
This topic describes how to create a "Hello World" multi-device application (C++
or Delphi) for either the iOS or Android target platform.
Before You Start

To develop mobile (iOS and Android) applications using RAD Studio, you need to
complete some important configuration steps. This tutorial assumes that you
have completed all the necessary setup steps.
For details, see:
o

(iOS)

(Android)
37
Step 1: Create a New FireMonkey Application for

Android or iOS
1. Select either:
File > New > Multi-Device Application - Delphi
File > New > Multi-Device Application - C++Builder
The Multi-Device Application wizard appears:
38
2. Select Blank Application. The Form Designer shows a new form:
3. Select the target platform from the Project Manager.

1. Android: See Configuring Your System to Detect Your Android
Device to use an Android device.
2. iOS: If you want to create an iOS app, open the Target Platform
node in the Project Manager and double-click iOS Simulator (only
for Delphi) or a connected iOS device (for either Delphi or C++):
Note: When you select a platform, the components not available for this
particular platform appear grayed.
Step 2: Select a Style

1. Select either iOS or Android from the Style drop-down menu in order to
define the Master view to show all the properties related with this style.
Note: See Style Selector for more information.
Step 3: Place Components on the Multi-Device Form

We recommend that you read this tutorial before you start placing components:
Mobile Tutorial: Using Layout to Adjust Different Form Sizes or Orientations (iOS
and Android).
The first step in creating a multi-device application is designing the user
interface. There are many reusable components available in the IDE for creating
user interfaces.
39
1. Move the mouse pointer over the Tool Palette, and expand the Standard
category by clicking the plus (+) icon next to the category name.
2. Select the TEdit component and either double-click TEdit or drop it onto
the Form Designer.
3. Repeat these steps, but now add a TLabel and a TButton component to
the form.
4. Select the edit box and set the KillFocusByReturn property in the Object
Inspector to True.
5. Select the button and change the Text property in the Object Inspector to
"Say Hello".
6. Now you should see three components on the Form Designer. Here is an
iOS app:
40
7. After you place these components on the Form Designer, the IDE
automatically sets names for the components.
To see or to change the name of a component, click the component on the
Form Designer, and then find its Name property in the Object Inspector and the
Structure View:
For a TButton component, the component name is set by default to Button1 (or
Button2, Button3, depending on how many TButtons you have created in this
application).
8. The form on which these components are located also has a name.
Select the background of the Form Designer, and select the Name
property in the Object Inspector. The name of the form Form1 (or Form2,
Form3,...) is displayed. You can also locate the name of the form in the
Structure View:
Note: Form names set by default as Form1, Form2, Form3,... are for the Master
views. Device views are named FormName_ViewName such as Form1_iPhone
(iPhone 3.5 form) and Form1_NmXhdpiPh (Android 4 Phone form).
41
9. You can easily switch to source code by selecting the Code (for Delphi) or
<unit name>.cpp/<unit name>.h (for C++) tab at the bottom of the Form
Designer. You can also press the F12 key to switch between the Form
Designer and the Code Editor:
Delphi
C++
The Code Editor displays the source code that the IDE has generated. You should
find three components defined (Edit1, Label1, and Button1):
Delphi
C++
Note: When you save or run your project, the uses and include clauses are
updated (to add FMX.StdCtrls for TLabel and FMX.Edit for TEdit).
42
Step 4: Adding Views to Your Project

If you want to customize you application for a particular type of device, you can
do it using Views.
1. Go to the Views selector.
2. Select the available views you want to add just by clicking on them.
3. Go to the view to do the changes you want to include.
To add a customized view, see Adding a Customized View to the View Selector.
Step 5: Write an Event Handler for a Button Click by

the User
The next step is defining an event handler for the TButton component. You can
define event handlers for your application in the same way you define event
handlers for desktop platforms. For the TButton component, the most typical
event is a button click.
Double-click the button on the Form Designer, and RAD Studio creates skeleton
code that you can use to implement an event handler for the button click
event:
Delphi
C++
Now you can implement responses within the Button1Click method.

The following code snippets (Delphi and C++) implement a response that
displays a small dialog box, which reads "Hello + <name entered into the edit
box>":
Delphi code:
Label1.Text := 'Hello ' + Edit1.Text + ' !';
C++ code:
Label1->Text = "Hello " + Edit1->Text + " !";
43
In Delphi, the quotation marks that surround string literals must be straight single
quotation marks (that is, 'string'). You can use the plus (+) sign to concatenate
strings. If you need a single quote inside a string, you can use two consecutive
single quotes inside a string, which yields a single quote.
While you are typing code, some tooltip hints appear, indicating the kind of
parameter you need to specify. The tooltip hints also display the kinds of
members that are supported in a given class:
Delphi
C++
Step 6: Test Your Mobile Application

The implementation of this application is finished, so now you can run the
application.
You can click the Run button ( ) in the IDE, press F9, or select Run > Run from the
RAD Studio main menu:
Delphi
C++
44
Test Your Android Application on the Android Device

If you complete the steps described in Mobile Tutorial: Set Up Your Development
Environment on Windows PC (Android) before creating your new project, you
can now run your Android app on an Android device connected to your PC by
USB cable.
45
Test Your iOS Application

Testing on the Mac (iOS Simulator)
By default, FireMonkey Delphi iOS applications run on the iOS Simulator target
platform. You can confirm the target platform in the Project Manager:
When you run your application, it is deployed to the Mac and then to the iOS
Simulator on the Mac. For our app, a form with an edit box and a button is
displayed. Enter text into the edit box, and click the Say Hello button:
Note: On the iOS simulators, you can test only your Delphi applications.
46
Testing on a Connected iOS Device

If you complete the steps described in Mobile Tutorial: Set Up Your Development
Environment on the Mac (iOS) and Mobile Tutorial: Set Up Your Development
Environment on Windows PC (iOS) before creating your new project, you can
now run your iOS app on an iOS device connected to your Mac by USB cable.
To run your iOS app on a connected iOS device, first select the iOS Device - 32
bit or iOS Device - 64 bit target platform so that the Platform Assistant deploys
the application to the connected iOS Device:
After you select the appropriate iOS Device target platform, run your iOS app by
clicking the Run button in the IDE, pressing F9 or selecting Run > Run.
On your Mac, you might see a dialog asking your permission to code sign your
iOS app. Select either "Always Allow" or "Allow" to sign your app.
Then go to your iOS device and wait for your FireMonkey iOS app to appear.
Watch for the FireMonkey launch image (the icon is available in
$(BDS)\bin\Artwork\iOS, and you can set the launch image in Application
Options):
47
See Also
o
Android)
48
Mobile Tutorial: Using an Address Book Component (iOS and Android)
Mobile Tutorial: Using an Address

Book Component (iOS and Android)
Before starting this tutorial, it is recommended that you read and perform the
following tutorials:
o
Mobile Tutorial: Using a MultiView Component to Display Alternate Views

of Information (iOS and Android)
Mobile Tutorial: Using ListBox Components to Display a Table View (iOS

and Android)
FireMonkey provides the TAddressBook component to work with Address Book on

iOS and Android devices.
This tutorial describes how to create a simple FireMonkey application that uses
the TAddressBook component.
iOS
Android
iPhone 5
Android (LG - E612)
49
Basic Features of the TAddressBook Component

On mobile platforms (Android and iOS), FireMonkey supports the TAddressBook
component that lets your applications access a device Address Book. The basic
features of this component are as follows:
o
Sending a request to access a device Address Book and getting the

access status.
Accessing all sources defined in the device Address Book.
Fetching all or individual contacts from the specified source.
Fetching all contacts from the specified group(s).
Editing or removing existing contacts and groups.
Creation of new contacts.
Creation of new groups.
Creating a Sample Application

This section helps you develop a sample application (for Android and iOS target
platforms) that illustrates the use of the TAddressBook component. The
application demonstrates the following techniques:
o
Requesting a permission to access Address Book.
Retrieving all contacts from the default source in the device Address
Book.
Adding a new contact to Address Book.
Removing a selected contact from Address Book.
Designing the User Interface

1. Create a blank Multi-Device Application, by selecting:
For Delphi: File > New > Multi-Device Application - Delphi > Blank
Application
For C++: File > New > Multi-Device Application - C++Builder > Blank
Application
2. In the Project Manager, set the target platform to Android or iOS.

3. In the Tool Palette, select the TToolBar, TAddressBook, and TListBox
components and drop them on the Form Designer.
4. In the Object Inspector, set the Align property of TListBox to Client.
50
5. On the Form Designer, right-click TListBox, and then on the shortcut menu,
select Add Item > TSearchBox.
6. In the Tool Palette, select the TMultiView component, and drop it on the
Form Designer.
Designing the Application Toolbar and Master Pane

Place all control elements on the toolbar and Master Pane:
o
The toolbar contains three speed buttons:
: removes a selected contact from the Address Book.
: refreshes the current list of contacts.
: opens the Master Pane to add a new contact to the Address

Book.
The Master Pane provides a form to specify and add a new contact to
the Address Book.
51
To design the application toolbar:

1. On to the top toolbar, drop three TSpeedButton components.
2. In the Form Designer, do the following:
Select SpeedButton1, and set the Name and StyleLookup

properties to btnRemove and trashtoolbuttonordered, respectively.

properties to btnRefresh and refreshtoolbuttonordered,
respectively.

properties to btnAdd and addtoolbuttonordered, respectively.
After performing the above steps, your Form Designer will be similar to the
following screen:
To design the Master Pane:

1. In the Structure View, select MultiView1, and then in the Object Inspector,
specify the following properties:
Set the MasterButton property to btnAdd.
Set the Mode property to Drawer.
To make the MultiView1 visible, set the Visible property to True.
52
2. In the Tool Palette, select three TLabel components, three TEdit

components, and two TButton components, and drop them to Multiview1.
3. In the Object Inspector, specify the following properties of the control
elements that you have placed onto MultiView1:
For Label1, Label2, and Label3: set the Text properties to First
Name, Last Name, and Work Mail, respectively.
For Edit1, Edit2, and Edit3:
set the Name property to edtFirstName, edtLastName, and

edtWorkMail, respectively.
set the KillFocusByReturn property to true
set the ReturnKeyType property to Go.
For Button1 and Button2:
set the Text property to Add and Cancel
set the Name property to btnOK and btnCancel, respectively.
We recommend that you arrange the control elements of the Master Pane in the
following way:
53
Retrieving the Contacts List

This section explains how to retrieve the Contacts list from the default source in a
device Address Book.
In your application, define the following private methods:
o
FillContactsList: gets the list of contacts of the default source in the
device Address Book;

o
AddListBoxItem: adds a new item to ListBox.
Make the following changes to the Private section of your application code:
Delphi:
private
{ Private declarations }
procedure FillContactList;
procedure AddListBoxItem(Contact: TAddressBookContact);
C++Builder:
private:
// User declarations
void __fastcall FillContactsList();
void __fastcall AddListBoxItem(TAddressBookContact *Contact);
Implement the FillContactslist and AddListBoxItem methods as follows:

Delphi:
// Fill the contact list
procedure TForm1.FillContactList;
var
I: Integer;
Contacts: TAddressBookContacts;
begin
Contacts := TAddressBookContacts.Create;
try
AddressBook1.AllContacts(AddressBook1.DefaultSource, Contacts);
ListBox1.BeginUpdate;
try
ListBox1.Clear;
for I := 0 to Contacts.Count - 1 do
AddListBoxItem(Contacts.Items[I]);
finally
ListBox1.EndUpdate;
end;
finally
Contacts.Free;
end;
end;
// --------------------------------------------------------------------
54
// Add a new contact to List box

procedure TForm1.AddListBoxItem(Contact: TAddressBookContact);
var
ListBoxItem: TListBoxItem;
begin
try
ListBoxItem := TListBoxItem.Create(nil);
ListBoxItem.Text := Contact.DisplayName;
ListBoxItem.Tag := Contact.ID;
ListBox1.AddObject(ListBoxItem);
finally
ListBoxItem.Free;
end;
end;
C++Builder:
// Fill the List box with existed contact display names.
void __fastcall TForm1::FillContactsList() {
int i;
TAddressBookContacts *Contacts = new TAddressBookContacts();
__try {
AddressBook1->AllContacts(AddressBook1->DefaultSource(),
Contacts);
__try {
ListBox1->BeginUpdate();
ListBox1->Clear();
for (i = 0; i < Contacts->Count; i++)
AddListBoxItem(Contacts->Items[i]);
}
__finally {
ListBox1->EndUpdate();
}
}
__finally {
Contacts->Free();
}
}
// --------------------------------------------------------------------------// Add a new contact to List box
void __fastcall TForm1::AddListBoxItem(TAddressBookContact *Contact) {
TListBoxItem *ListBoxItem = new TListBoxItem(ListBox1);
__try {
ListBoxItem->Text = Contact->DisplayName;
ListBoxItem->Tag = Contact->ID;
ListBox1->AddObject(ListBoxItem);
}
__finally {
ListBoxItem->Free();
}
}
55
Implementing the Control Elements Functionality

To complete the application development, you should implement event
handlers for all control elements that you have dropped onto the application
form.
To implement the OnClick event handlers for speed buttons:
1. On the Form Designer, double-click a speed button (btnRefresh or
btnRemove).
2. In the Code Editor, specify the following event handlers for each button:
Delphi:
//-------------------For Remove button ---------------------------------------procedure TForm1.btnRemoveClick(Sender: TObject);
var
ContactIndex, ContactID: Integer;
Contact: TAddressBookContact;
begin
ContactIndex := ListBox1.ItemIndex;
if (ContactIndex > -1) Then
begin
ContactID := ListBox1.ListItems[ContactIndex].Tag;
Contact := AddressBook1.ContactByID(ContactID);
if Contact <> nil then
try
AddressBook1.RemoveContact(Contact);
ListBox1.Items.Delete(ContactIndex);
finally
ListBox1.EndUpdate;
Contact.Free;
end;
end;
end;
// -------------------For Refresh button--------------------------------------procedure TForm1.btnRefreshClick(Sender: TObject);
begin
FillContactsList;
end;
56
C++Builder:
//-------------------For Remove button ---------------------------------------// Remove the contact currently selected from the List box
void __fastcall TForm1::btnRemoveClick(TObject *Sender) {
int ContactIndex = ListBox1->ItemIndex;
if (ContactIndex > -1) {
int ContactID = ListBox1->ListItems[ContactIndex]->Tag;
TAddressBookContact *Contact = AddressBook1>ContactByID(ContactID);
if (Contact != NULL) {
__try {
AddressBook1->RemoveContact(Contact);
ListBox1->Items->Delete(ContactIndex);
}
__finally {
Contact->Free();
}
}
}
}
// --------------------------For Refresh button-----------------------------------void __fastcall TForm1::btnRefreshClick(TObject *Sender) {
FillContactsList();
}
To implement the onClick event handlers for the Master Pane buttons:
1. In the Structure View, select MultiView1.
2. In the Object Inspector, set the Visible property to True.
This makes the Master Pane visible.
57
3. On the Master Pane, double-click the Add button, and then implement
the following event handler:
For Delphi:
// -------------------------------------------------------------------// Add a newly created contact to Address Book

procedure TForm1.btnOKClick(Sender: TObject);
var
Contact: TAddressBookContact;
eMails: TContactEmails;
Addresses: TContactAddresses;
begin
Contact := AddressBook1.CreateContact(AddressBook1.DefaultSource);
try
Contact.FirstName := edtFirstName.Text;
Contact.LastName := edtLastName.Text;
// Add the work mail
eMails := TContactEmails.Create;
try
eMails.AddEmail(TContactEmail.TLabelKind.Work, edtWorkMail.Text);
Contact.eMails := eMails;
finally
eMails.Free;
end;
AddressBook1.SaveContact(Contact);
try
AddListBoxItem(Contact);
finally
ListBox1.EndUpdate;
end;
finally
Contact.Free;
end;
MultiView1.HideMaster;
end;
58
For C++:
// Add a newly created contact to Address Book

void __fastcall TForm1::btnOKClick(TObject *Sender) {
TContactEmails *eMails;
TAddressBookContact *Contact =
AddressBook1->CreateContact(AddressBook1>DefaultSource());
__try {
Contact->FirstName = edtFirstName->Text;
Contact->LastName = edtLastName->Text;
// Add the work mail
eMails = new TContactEmails();
__try {
eMails->AddEmail(TContactEmail::TLabelKind::Work,
edtWorkMail->Text);
Contact->EMails = eMails;
}
__finally {
eMails->Free();
}
AddressBook1->SaveContact(Contact);
__try {
AddListBoxItem(Contact);
}
__finally {
}
}
__finally {
Contact->Free();
}
MultiView1->HideMaster();
}
59
4. On the Master Pane, double-click the Cancel button, and then

implement the following event handler:
For Delphi:
// Clear and close the Add New Contact form

procedure TForm1.btnCancelClick(Sender: TObject);
begin
edtFirstName.Text := '';
edtLastName.Text := '';
edtWorkMail.Text := '';
MultiView1.HideMaster;
end;
For C++:
// Clear and close the Add New Contact form

void __fastcall TForm1::btnCancelClick(TObject *Sender)
{
edtFirstName->Text = "";
edtLastName->Text = "";
edtWorkMail->Text = "";
MultiView1->HideMaster();
}
Keeping Address Book in Sync

Perhaps some third-party tools make changes to a device Address Book when
your application is running. In this scenario, it is important to keep information
synchronized between the device Address Book and the instance of the Address
Book with which your application is directly working. For this purpose, FireMonkey
provides the TAddressBook.RevertCurrentChangesAndUpdate method.
To keep Address Book in Sync
1. In the Object Inspector, select AddressBook1, and then open the Events
tab.
2. Double-click next to OnExternalChange, and then implement the
following event handler:
For Delphi:
procedure TForm1.AddressBook1ExternalChange(ASender: TObject);

begin
AddressBook1.RevertCurrentChangesAndUpdate;
FillContactsList;
end;
60
For C++:
void __fastcall TForm1::AddressBook1ExternalChange(TObject *ASender) {

AddressBook1->RevertCurrentChangesAndUpdate();
FillContactsList();
}
Configuring Access to Address Book

Before using TAddressBook, your application should request a permission to
access the Address Book on a target mobile device.
This section provides the steps to configure your Android and iOS applications to
access the Address Book on the target mobile devices.
To request a permission to access the Address Book:
1. In the Object Inspector, select Form1, and then open the Events tab.
2. Double-click next to onShow, and then implement the following event
handler:
For Delphi:
procedure TForm1.FormShow(Sender: TObject);

begin
// Display this information box while loading the contacts
if AddressBook1.Supported then
begin
TDialogService.ShowMessage('Loading contacts...');
AddressBook1.RequestPermission;
end
else
ShowMessage('This platform does not support the Address Book
service');
end;
61
For C++:
void __fastcall TForm1::FormShow(TObject *Sender) {

if (AddressBook1->Supported()) {
// Display this information box while loading the
contacts
TDialogService::ShowMessage("Loading contacts...");
AddressBook1->RequestPermission();
}
else {
TDialogService::ShowMessage
("This platform does not support the Address Book
service.");
}
}
Note To use the TDialogService.ShowMessage method,

ensure that your code includes the following instructions:
Delphi:
uses
FMX.DialogService;
C++:
#include <FMX.DialogService.hpp>
3. In the Object Inspector, select AddressBook1, and then open the Events
tab.
4. Double-click next to OnPermissionRequest, and then implement the
following event handler:
For Delphi:
procedure TForm1.AddressBook1PermissionRequest(ASender: TObject;

const AMessage: string; const AAccessGranted: Boolean);
begin
if AAccessGranted then
Begin
FillContactlist;
End
else
ShowMessage('You cannot access Address Book. Reason: ' + AMessage);
end;
62
For C++:
void __fastcall TForm1::AddressBook1PermissionRequest(TObject *ASender,

const UnicodeString AMessage, const bool AAccessGranted) {
if (AAccessGranted) {
FillContactsList();
}
else {
ShowMessage("You cannot access Address Book. Reason: " +
AMessage);
}
}
Configuring Android Applications to Access the Address Book

Before running Android applications that use the TAddressBook component, you
need to configure some Uses Permissions for your project.
To configure Uses Permissions:
1. In the RAD Studio IDE, open Project > Options > Uses Permissions.
2. Enable the following permissions:
Get accounts
Read contacts
Write contacts
Running the Sample Application

To run this application, do the following:
1. In the Project Manager, select the target platform (supported platforms:
Android or iOS).
Important: Before running this application on Android
devices, ensure that you have completed the steps from
Configuring Android Applications to Access the Address
Book.
2. Press Shift+Ctrl+F9 to run the application without debugging.
To test your application, you can use the following scenarios.
63
To add a new contact to Address Book

1. On the application toolbar, tap
This opens the Master Pane.
2. In the Master Pane, enter appropriate information in the First name, Last
name, and Work mail text boxes. When finished, tap Add to add the
newly created contact to Address Book.
64
To delete a contact
1. In the contacts list, tap a contact to delete.
2. On the application toolbar, tap

Attention!This removes the contact from the device Address Book without
displaying a confirmation prompt!
65
See Also
o
TAddressBook
Mobile Tutorial: Using a MultiView Component to Display Alternate Views

of Information (iOS and Android)

and Android)
Code Samples
o
Birthday Reminder Sample
66
Mobile Tutorial: Using a Button Component with Different Styles (iOS and Android)
Mobile Tutorial: Using a Button

Component with Different Styles (iOS
and Android)
Buttons in Mobile Platforms
FireMonkey defines various types of buttons, and you can use these different
types of buttons with the same steps described here. The FireMonkey buttons
include TButton and TSpeedButton.
67
Following are some examples of different styles with Button components

available for you to use in different parts of the user interface of your application:
o
Buttons on the Form:

iOS
Android
Buttons on the Navigation Bar (also known as Toolbar):

iOS
Android
68
Define the Look and Feel for a Button Component

After you place a new button on the Form Designer, you can specify some
important properties for a selected component by using the Object Inspector.
Select a component (in this case, a button), and then browse and change the
value of some properties as follows:
o
Change the text displayed on the button surface by updating the value
of the Text property in the Object Inspector.
Change the value of the Position.X and Position.Y properties (or drag the
component using your mouse.)
Change the value of the Height and/or Width properties (or drag the
edge of the component using your mouse.)
Click the down-arrow in the StyleLookup property.
69
In the StyleLookup drop-down list, you can select a predefined Style based on
how your component is to be used:
To create a colored button, change the values of the TintColor and

IconTintColor properties. The latter property is available only for styled
buttons with icons. The next section gives more details about using
TintColor and IconTintColor.
70
Using TintColor and IconTintColor on Buttons

For TButton and TSpeedButton, FireMonkey provides two properties that
determine how to tint or color the button:
o
TintColor specifies the button background color.
IconTintColor specifies the color of the icon on styled buttons.

Note: The TintColor and IconTintColor properties are only available
in the Object Inspector if you select a proper Style for the button
and select a proper View in the Form Designer (these properties are
not visible in all Views).
For the Android target platform:

You can apply a tint to most buttons of any style:
o
For speed buttons, you need to select a proper StyleLookup value in order
to change the TintColor value in the Object Inspector.
To modify TintColor and IconTintColor, choose an Android device from the

Views list in the upper right of the Form Designer.
For the iOS target platforms:

o
FireMonkey provides buttons that correspond to the Apple Style Guide,

and some buttons might not support the tint feature.
For example, on iOS, segmented buttons have the TintColor property.
71
When you change the StyleLookup property of a button, the Object Inspector
automatically displays or hides the TintColor and IconTintColor properties as
appropriate for the StyleLookup property value. The following image shows three
TSpeedButtons on an Android app:
Using Styled and Colored Buttons on Target Platforms

For information on the availability of the StyleLookup, TintColor, and IconTintColor
properties for buttons on all target platforms, see this summary table: Using Styled
and Colored Buttons on Target Platforms.
Customizing Buttons with Styles

Now in FireMonkey, a TStyleBook component is a collection of styles for various
target platforms. You can create your custom styles for individual buttons or for a
whole control class (TButton or TSpeedButton).
72
To start working with custom styles for buttons

1. In the Form Designer, ensure that you have selected Master from the View
selector.
2. On the Form Designer, right-click a button or speed button, then choose
on the shortcut menu one of the following items:
Edit Custom Style: opens the FireMonkey Style Designer to edit the
styles for selected button.
Edit Default Style: opens the FireMonkey Style Designer to edit the
styles for the selected control class (such as TButton or
TSpeedButton).
For more information about working with custom styles, see the following topics:
o
Customizing FireMonkey Applications with Styles
FireMonkey Style Designer
BitmapLinks Editor
Placing an Image over a Button

RAD Studio allows you to easily put custom images on button components at
design time.
To place an image over a button:
1. With a TButton and TImage component on the Form Designer, make
TImage a child component of TButton. (Use the Structure View.)
2. In the Object Inspector, select TImage and set its Align property to Client.
73
3. In the Structure View, select the button, expand the Image node, and
then click 0 - Empty (1.000).
4. In the Object Inspector, click the ellipsis button (...) next to Bitmap.
5. Add your custom image in the MultiResBitmap Editor.
6. In the Object Inspector, select TButton, and do the following:
Clear the Text property.
Set the Height and Width properties of TButton to the actual height
and width of your image.
Create a Segmented Control Using Button

Components
FireMonkey uses a SpeedButton component to define the Segmented Control,
which gives users the ability to select one value from several options.
iOS
Android
74
To define a Segmented Control, use the following steps:

1. Place three TSpeedButton components from the Tool Palette. Place the
TSpeedButton components next to each other using your mouse:
iOS
Android
2. Select the first component, and change its StyleLookup property to

segmentedbuttonleft:
iOS
Android
3. Select the second component, and change its StyleLookup property to

segmentedbuttonmiddle.
4. Select the third component, and change its StyleLookup property to
segmentedbuttonright. Now all three buttons look like a Segmented
Control:
iOS
Android
5. Select each component, and change the Text property as you like:
iOS
Android
75
6. Use the mouse to select these three buttons:

iOS
Android
7. Set the GroupName property to a unique name such as

LocationSegments:
8. To specify that one of these components is to appear as Pressed by

default, set the IsPressed property for one component to True:
iOS
Android
Create a Scope Bar on a Toolbar Component

You can define a Segmented Control on a toolbar; this is also known as a Scope
Bar, a segmented control that can be used to control the scope of a search.
76
Use the same TSpeedButton controls as in the previous steps, but with the
following values for the StyleLookup property (only available on iOS target
platform):
o
toolbuttonleft
toolbuttonmiddle
toolbuttonright
(on the Android target platform set StyleLookup as toolbutton for each of the
buttons.)
iOS
Android
Important Differences Between a TButton and

TSpeedButton
o
TSpeedButton cannot receive TAB focus. That also means that pressing a
TSpeedButton does not take away focus from other elements.
TSpeedButton is primarily meant to be a toolbar button.
The style of TSpeedButton can be different than the style of TButton. For
example, on the Android platform, the default style of the TSpeedButton is
similar to the toolbutton style of the TButton. If you want a TSpeedButton
with a similar style to the TButton, choose the buttonstyle style.
See Also
o

Android)
Mobile Tutorial: Using a Calendar Component to Pick a Date (iOS and

Android)
Tutorial: Using the BitmapLinks Editor
FireMonkey Style Designer
FMX.Controls Sample
FMX.StdCtrls.TButton
FMX.StdCtrls.TSpeedButton
77
FMX.Controls.TStyledControl.StyleLookup
FMX.StdCtrls.TToolBar
FMX.StdCtrls.TCustomButton.IconTintColor
FMX.StdCtrls.TCustomButton.TintColor
FMX.StdCtrls.TToolBar.TintColor
78
Using Styled and Colored Buttons on

Target Platforms
The following table shows the availability of the StyleLookup, TintColor, and
IconTintColor properties for buttons (such as TButton and TSpeedButton), on all
target platforms.
StyleLookup
Windows OSX iOS Android TintColor* IconTintColor*
ActionToolButton
ActionToolButtonBordered
AddItemButton
AddItemButtonBordered
o
o
AddToolButton
AddToolButtonBordered
ArrowDownToolButton
ArrowDownToolButtonBordered
ArrowDownToolButtonBorderedRight X
ArrowLeftToolButton
ArrowLeftToolButtonBordered
ArrowRightToolButton
ArrowRightToolButtonBordered
ArrowUpToolButton
ArrowUpToolButtonBordered
ArrowUpToolButtonBorderedLeft
BackToolButton
BackToolButtonLabel
BookmarksToolButton
BookmarksToolButtonBordered
o
o
o
o
o
o
o
o
79
ButtonStyle
XXXXo
ButtonStyleLabel
XX
CameraToolButton
XXXX
CameraToolButtonBordered
XXX
ClearEditButton
XXXX
ColorButtonStyle
XXXX
ComposeToolButton
XXXX
ComposeToolButtonBordered X X X
CornerButtonStyle
XXXX
DeleteItemButton
XXXX
DeleteItemButtonBordered
DeleteToolButton
XXXX
DetailsToolButton
XXXX
DetailsToolButtonBordered
XXX
DoneToolButton
XXXX
DropDownEditButton
XX
EllipsesEditButton
XX
ForwardToolButton
XXXX
ForwardToolButtonBordered
XXX
InfoToolButton
XXXX
InfoToolButtonBordered
XXX
ListItemButton
ListItemDeleteButton
XXXX
NextToolButton
XXXX
NextToolButtonBordered
XXX
OrganizeToolButton
XXXX
XXo
OrganizeToolButtonBordered X X X
80
PageCURLToolButton
XXXX
PasswordEditButton
XX
PauseToolButton
XXXX
PauseToolButtonBordered
XXX
PlayToolButton
XXXX
PlayToolButtonBordered
XXX
PriorToolButton
XXXX
PriorToolButtonBordered
XXX
RadioButtonStyle
XXXX
RefreshToolButton
XXXX
RefreshToolButtonBordered
XXX
ReplyToolButton
XXXX
ReplyToolButtonBordered
XXX
RewindToolButton
XXXX
RewindToolButtonBordered
XXX
SegmentedButtonLeft**
XXXXo
SegmentedButtonMiddle**
XXXXo
SegmentedButtonRight**
XXX
SearchEditButton
XXXX
SearchToolButton
XXXX
SearchToolButtonBordered
XXX
SpeedButtonStyle
XXXX
SpeedButtonStyleLabel
XX
SpinEditButton
XXXX
StepperButtonLeft
XXXXoo
StepperButtonRight
XXXXoo
StopToolButton
XXXX
81
StopToolButtonBordered
XXX
ToolButton
XXXX
ToolButtonLabel
XX
ToolButtonLeft
XXX
ToolButtonMiddle
XXX
ToolButtonRight
XXX
TransparentCircleButtonStyle X X X X
TrashToolButton
XXXX
TrashToolButtonBordered
XXX
Notes
* The TintColor and IconTintColor properties are only available on
mobile platforms (iOS and Android) and only for certain
StyleLookup values.
** The SegmentedButtonLeft, SegmentedButtonMiddle, and
SegmentedButtonRight styles are only available for
theTSpeedButton component.
Table legeng:
o
"X": This StyleLookup value is available for TButton and/or

TSpeedButton. In the Object Inspector, you can select the
given value from the StyleLookup drop-down list.
An empty cell: This property value (for StyleLookup, TintColor,

and IconTintColor) is not available for the selected style.
"o": You can select this property in the Object Inspector.
"": Equivalent to an empty cell. This property is not available

for iOS or Android platforms.
See Also
o
Android)
TButton
TSpeedButton
82
Mobile Tutorial: Using a Calendar

Component to Pick a Date (iOS and
Android)
Calendar in Mobile Platforms
FireMonkey uses the TDateEdit component to wrap a calendar component or
datepicker for the mobile target platform:
iOS7
Android
iPad2
LG-E612
Note: The TCalendarEdit component used in RAD Studio XE5 or

earlier is deprecated. Use the TDateEdit component instead.
83
To use the TDateEdit component, perform the following simple steps:

1. Select the TDateEdit component in the Tool Palette, and drop the
component onto the Form Designer. To find the component in the Tool
Palette, enter the first few characters (such as "dat") in the search box (
):
After you drop the component, you can see the TDateEdit component on the
Form Designer:
Optionally, in the Object Inspector, you can set the following properties of
TDateEdit:
ShowCheckBox: when true, displays a checkbox on the TDateEdit

control. This checkbox allows you to enable/disable the TDateEdit
control at run time.
ShowClearButton: when true, displays a button on the TDateEdit

control. Click this button to clear values in this control at run time.
84
2. Basically, that's it. Run your application on either a simulator or your

connected mobile device. After you tap TDateEdit, the calendar control
appears, and you can select a date.
iOS6 (iPhone5)
Android (LG-E612)
Implementing an Event Handler for User Changes to

the Date
After the user changes the date, the OnChange event is fired. You can
implement an event handler for the OnChange event to react to the user's
action.
To implement the OnChange event handler'
1. Select the TDateEdit component.
2. In the Object Inspector, open the Events page, and double-click the
empty space next to OnChange.
85
3. Write code as follows:

Delphi:
procedure TForm25.DateEdit1Change(Sender: TObject);
begin
ShowMessage(FormatDateTime('dddddd', DateEdit1.Date));
end;
C++Builder:
void __fastcall TForm25::DateEdit1Change(TObject *Sender)
{
ShowMessage(FormatDateTime("dddddd", DateEdit1->Date));
}
86
This code shows a message dialog with a date selected. The FormatDateTime
function converts the selected date to a specified format (in this case dddddd
gives long-style date format):
iOS (iPad)
Android (LG-E612)
See Also
o
Android)
Mobile Tutorial: Using Combo Box Components to Pick Items from a List
(iOS and Android)
Date and Time Support
Type conversion routines
FMX.DateTimeCtrls.TDateEdit
Samples
o
Date Picker sample
87
Mobile Tutorial: Using Combo Box Components to Pick Items from a List (iOS and Android)
Mobile Tutorial: Using Combo Box

Components to Pick Items from a List
(iOS and Android)
Implementing a Picker in Multi-Device Applications
For mobile platforms, FireMonkey wraps the Picker component with the
TComboBox component:
iOS
Android
To define a picker and the associated list items:

1. Select either of the following:
File > New > Multi-Device Application - Delphi > Blank Application
File > New > Multi-Device Application - C++Builder > Blank

Application
2. Select the TComboBox component in the Tool Palette, and drop it on the
Form Designer.
To find TComboBox, enter the first few characters ("Com") in the Search
box of the Tool Palette:
88
3. After you drop the component, you can see the TComboBox component
on the Form Designer.
Right-click the TComboBox component and select Items Editor...:
4. To define items, click Add Item several times.
5. In the Structure View, select ListBoxItem1 (the first item in the list).
89
6. In the Object Inspector, edit the Text property for ListBoxItem1.

In this example (the fifty states in the USA), enter "Alabama" as the first
item in the list:
7. Edit other items as well, such as Alaska, Arizona, Arkansas, California,

Colorado, and so forth.
8. Select the TComboBox component and in the Object Inspector, set the
TComboBox.Align property to Top.
9. Add a second TComboBox (ComboBox2) to the form. Select the
TComboBox component in the Tool Palette, and drop it again on the Form
Designer.
10. Select ComboBox2 and in the Object Inspector, set the TComboBox.Align
property to Bottom.
11. Run the application on your chosen mobile target platform (iOS Simulator
(for Delphi only), iOS Device, or Android Device).
After you tap a TComboBox, the Picker control appears, and you can
select an item.
90
Building a List of Items Using Code

To build a list of items using code, you should implement the onFormCreate event
handler in the following way:
Delphi:
procedure TForm1.FormCreate(Sender: TObject);
begin
ComboBox2.Items.Add('Tiger');
ComboBox2.Items.Add('Cat');
ComboBox2.Items.Add('Penguin');
ComboBox2.Items.Add('Bee');
// Other animals can be listed here
ComboBox2.Items.Add('Elephant');
ComboBox2.Items.Add('Lion');
end;
C++Builder:
void __fastcall TForm1::FormCreate(TObject *Sender)
{
ComboBox2->Items->Add("Tiger");
ComboBox2->Items->Add("Cat");
ComboBox2->Items->Add("Penguin");
ComboBox2->Items->Add("Bee");
ComboBox2->Items->Add("Elephant");
ComboBox2->Items->Add("Lion");
}
Displaying a Specific Item

The currently selected item is specified by the ItemIndex property. ItemIndex is an
integer value that is specified using a zero-based index (that is, the first item is
zero).
91
To display the list with the fifth item selected ("California"), specify ItemIndex for
ComboBox1 as follows:
Delphi:
begin
// Index of 5th item is "4"
ComboBox1.ItemIndex := 4;
ComboBox2.Items.Add("Tiger");
ComboBox2.Items.Add("Cat");
ComboBox2.Items.Add("Penguin");
ComboBox2.Items.Add("Bee");
ComboBox2.Items.Add("Elephant");
ComboBox2.Items.Add("Lion");
end;
C++Builder:
{
// Index of 5th item is "4"
ComboBox1->ItemIndex = 4;
ComboBox2->Items->Add("Tiger");
ComboBox2->Items->Add("Cat");
ComboBox2->Items->Add("Penguin");
ComboBox2->Items->Add("Bee");
ComboBox2->Items->Add("Elephant");
ComboBox2->Items->Add("Lion");
}
If you do not know the index value, you can find the value by using the IndexOf
method. To display the ComboBox2 with the item whose text is 'Penguin'
selected, add the following line to the previous code:
Delphi:
ComboBox2.ItemIndex := ComboBox2.Items.IndexOf('Penguin');
C++Builder:
ComboBox2->ItemIndex = ComboBox2->Items->IndexOf("Penguin");
92
Implementing an Event Handler for the User's

Selection
After the user selects an item, the OnChange event is fired. To respond to the
user's action, you can implement an event handler for the OnChange event.
Note: Before proceeding with this scenario, perform the following
steps:
1. Select the TMemo component in the Tool Palette, and drop
it on the Form Designer.
2. In the Object Inspector, set the TMemo.Align property to
Client.
To implement an OnChange event handler:
1. Select the ComboBox1 component.
2. In the Object Inspector, open the Events page, and double-click the
empty space next to OnChange.
3. The Code Editor opens. Write code as follows:
Delphi:
procedure TForm1.ComboBox1Change(Sender: TObject);
begin
Memo1.Lines.Insert(0, (Format('%s: Item %s at Index %d was selected. ',
[ComboBox1.Name,ComboBox1.Selected.Text, ComboBox1.ItemIndex])));
end;
C++Builder:
void __fastcall TForm1::ComboBox1Change(TObject *Sender)
{
Memo1->Lines->Insert(0, ComboBox1->Name + ": Item " + ComboBox1->Selected>Text + " at Index " + IntToStr(ComboBox1->ItemIndex) + " was selected.");
}
This event handler displays a message dialog that indicates the item that was
selected.
93
In the Delphi code, the Format function returns a formatted string assembled
from a format string and an array of arguments:
Android (LG - E612)
iOS6 (iPad)
94
See Also
o
Mobile Tutorial: Using a Calendar Component to Pick a Date (iOS and

Android)
Mobile Tutorial: Using Tab Components to Display Pages (iOS and Android)
Creating a Metropolis UI ComboBox
Samples
o
FireMonkey Custom Picker sample
95
Mobile Tutorial: Using a Map

Component to Work with Maps (iOS
and Android)
FireMonkey wraps a map component as TMapView. This component provides
access to map APIs that depend on the target platform in the following way:
o
On Android devices: Google Maps Android API
On iOS devices: Map Kit Framework
This tutorial describes how to create a simple FireMonkey application that uses
the TMapView component.
iOS
Android
iPad
Android (LG - E612)
96
Basic Features of the TMapView Component

The TMapView component adds interactive maps to your mobile applications.
The basic features of this component are as follows:
o
Four Types of Maps: Normal, Satellite, Hybrid, and (for Android only) Terrain
Gesture Control: Intuitive tilt, rotate, and zoom gesture controls
Control the Map View: Ability to control the map properties, such as the
map center coordinates, the map orientation, and so on
Creating a Sample Application

This section helps you to develop a sample application (for Android and iOS
target platforms) that illustrates the use of the TMapView component. The
application demonstrates the following techniques:
o
Selecting a map type
Rotating the map
Specifying the map center coordinates
Adding markers to the map
Configuring Android Applications to Use the TMapView component

Before using Google Maps, ensure that you have a Google Maps Android API v2
key (freely available). Without this key in place, your map app will generate a
run-time error.
You also need to configure some permissions and project options for your
application.
For detailed instructions on how to configure your application, see Configuring
Android Applications to Use Google Maps.

Application
Application
2. Select two TToolBar components in the Tool Palette, and drop them on the
Form Designer.
97
3. Select the TMapView component in the Tool Palette, and drop it on the
Form Designer.
4. In the Object Inspector, set the Align property of TMapView to Client.
5. In the Object Inspector, set the Align properties of the toolbars to Top and
Bottom, respectively.
Designing the Application Toolbars

Place all control elements on the toolbars. The application uses two toolbars (a
top toolbar, and a bottom toolbar).
To design the top toolbar
o
In the Tool Palette, select the following components and drop them onto
the top toolbar:
TTrackBar: Rotates the map.
Two TEdit components: Allow you to set the map center

coordinates (latitude and longitude).
TButton: Updates the map using the current map center

coordinates.
To specify the appropriate properties for control elements, do the following:

1. In the Form Designer, select TrackBar1 and set the Max property to 359.
2. Select Edit1, and set the Name and Text properties to edLat and 0.0,
respectively.
3. Select Edit2, and set the Name and Text properties to edLong and 0.0,
respectively.
4. Select Button1, and set the Text property to Go.
To design the bottom toolbar
1. In the Tool Palette, select the TLayout component and drop it onto the
bottom toolbar.
2. In the Object Inspector, specify the following properties of Layout1:
Set the Align property to Center.
Set the Width property to 241.
3. In the Tool Palette, select three TSpeedButton components, and add them
as child elements of Layout1.
98
4. In the Object Inspector, specify the following properties of the speed

buttons:
Set the Text property of buttons to Normal, Satellite, and Hybrid,

respectively.
Set the GroupName property of each button to Selector.
Set the StyleLookup property to segmentedbuttonleft,

segmentedbuttonmiddle, and segmentedbuttonright, respectively.
After performing the above steps, your Form Designer will be similar to the
following screen:
Implementing the Control Elements Functionality

handlers for all control elements that you have dropped onto the toolbars.
99
To implement the OnClick event handlers for speed buttons

1. On the Form Designer, double-click a speed button (Normal, Satellite, and
Hybrid).
2. In the Code Editor, specify the following event handlers for each button:
Delphi:
//-------------------For Normal button ---------------------------------------procedure TForm1.SpeedButton1Click(Sender:TObject) ;
begin
MapView1.MapType := TMapType.Normal;
TrackBar1.Value := 0.0;
end;
// -------------------For Satellite button-------------------------------------procedure TForm1.SpeedButton2Click(Sender:TObject) ;
begin
MapView1.MapType := TMapType.Satellite;
end;
// --------------------For Hybrid button---------------------------------------procedure TForm1.SpeedButton3Click(Sender:TObject) ;
begin
MapView1.MapType := TMapType.Hybrid;
end;
C++Builder:
//-------------------For Normal button ---------------------------------------void __fastcall TForm1::SpeedButton1Click(TObject *Sender) {
MapView1->MapType = TMapType::Normal;
TrackBar1->Value = 0.0;
}
// -------------------For Satellite button-------------------------------------void __fastcall TForm1::SpeedButton2Click(TObject *Sender) {
MapView1->MapType = TMapType::Satellite;
}
// --------------------For Hybrid button---------------------------------------void __fastcall TForm1::SpeedButton3Click(TObject *Sender) {
MapView1->MapType = TMapType::Hybrid;
}
100
To implement the OnChange event handler for the track bar element
1. On the Form Designer, select TrackBarl1.
2. In the Object Inspector, open the Events tab, and then double-click next
to onChange.
Specify the following code:
Delphi:
procedure TForm1.TrackBar1Change(Sender: TObject);
begin
MapView1.Bearing := TrackBar1.Value;
end;
C++Builder:
void __fastcall TForm1::TrackBar1Change(TObject *Sender)
{
MapView1->Bearing = TrackBar1->Value;
}
To implement the OnClick event handler for the Go Button

1. On the Form Designer, double-click the Go button.
2. In the Code Editor, specify the following code:
Delphi:
procedure TForm1.Button1Click(Sender: TObject);
var
mapCenter: TMapCoordinate;
begin
mapCenter := TMapCoordinate.Create(StrToFloat(edLat.Text),
StrToFloat(edLong.Text));
MapView1.Location := mapCenter;
end;
C++Builder:
void __fastcall TForm1::Button1Click(TObject *Sender) {
TMapCoordinate mapCenter =
TMapCoordinate::Create(StrToFloat(edLat->Text),
StrToFloat(edLong->Text));
MapView1->Location = mapCenter;
}
101
Markers identify locations on the map. If you want to add markers to the map,
you can implement the OnMapClick event handler for the map in the following
way.
To implement the OnMapClick event handler for the map
1. In the Structure View, select MapView1.
2. In the Object Inspector, open the Events tab, and double-click next to
OnMapClick.
3. In the Code Editor, implement the following event handler:
Delphi:
procedure TForm1.MapView1MapClick(const Position: TMapCoordinate);
var
MyMarker: TMapMarkerDescriptor;
begin
MyMarker := TMapMarkerDescriptor.Create(Position, 'MyMarker');
// Make a marker draggable
MyMarker.Draggable := True;
// Make a marker visible
MyMarker.Visible :=True;
MapView1.AddMarker(MyMarker);
end;
C++Builder:
void __fastcall TForm1::MapView1MapClick(const TMapCoordinate &Position)
{
TMapMarkerDescriptor myMarker =
TMapMarkerDescriptor::Create(Position, "MyMarker");
// Make a marker draggable
myMarker.Draggable = true;
// Make a marker visible
myMarker.Visible = true;
MapView1->AddMarker(myMarker);
}
Running the Sample Application

Android or iOS).
Important: Before running this application on Android
devices, ensure that you have completed the steps from
Configuring Android Applications to Use Google Maps.
102
To test your application, you can use the following scenario:

1. Click the Hybrid button.
2. Specify the new map center (by default the map center is (0.0, 0.0)):
In the left text box, set the latitude value (such as 50 degrees).
In the right text box, set the longitude value (such as 20 degrees).
Click the Go button.
3. Click any point on the map to add a marker.

4. Tap the track bar element, and then move the slide indicator by dragging
it to a particular location. [This changes the map orientation (bearing).
The map orientation is the direction in which a vertical line on the map
points, measured in degrees clockwise from north.]
iOS
Android
Android (LG - E612)
iPad
103
See Also
o
TMapView
Configuring Android Applications to Use Google Maps
Mobile Tutorial: Using Location Sensors (iOS and Android)
Code Samples
o
Tabbed Map Sample
Map Sample
104
Configuring Android Applications to

Use Google Maps
This topic explains how to configure your Android applications to use the
TMapView component and Google Maps Android API.
The following subjects are covered:
o
Getting Google Maps API key
Configuring specific project options
Getting the Google Maps API key

To access the Google Maps servers with the Maps API, you have to add a Maps
API key to your application. This section outlines basic steps to get this key:
1. Retrieve information about the certificate of your application.
2. Register a project in the Google APIs Console and add the Maps API as a
service for the project.
3. Request a MAPS API key.
Note: For more information and detailed instructions, see Get an
Android certificate and the Google Maps API key.
Retrieving Your Application Certificate

The Maps API key is based on a short form of the digital certificate of your
application, known as its SHA-1 fingerprint. The fingerprint is a unique text string
generated from the commonly-used SHA-1 hashing algorithm. You may have
certificates of two types: Debug certificate and Release certificate.
Note: This section explains how to retrieve the debug certificate. For
information on how to retrieve the release certificate, see Get an
Android certificate and the Google Maps API key.
105
To display the debug certificate fingertip

1. Locate the appropriate debug.keystore file. RAD Studio uses the
debug.keystore file located into:
%Users%\<user name>\AppData\Roaming\Embarcadero\BDS\<version
number>\, for example:
C:\Users\JohnDoe\AppData\Roaming\Embarcadero\BDS\18.0\debug.keyst
ore
Tip: If you cannot find the debug.keystore file in the above mentioned location,
run your application on the Android target platform, and then RAD Studio
automatically creates this file.
2. Find the keytool.exe file. The keytool tool is available in <Java
installation folder>\Bin, for example:
C:\Program Files\Java\jdk1.7.0_71\bin\.
3. Switch to the folder where the debug.keystore file is located and run:
keytool -list -v -keystore debug.keystore -alias androiddebugkey
-storepass android -keypass android
Tip: You need to add the full path to keytool; if the keytool.exe file is located in
the example provided above, you can use the following:
"C:\Program Files\Java\jdk1.7.0_71\bin\keytool" -list -v -keystore
debug.keystore -alias androiddebugkey -storepass android -keypass
android
4. The keytool tool displays an output similar to this: Alias name:

androiddebugkey Creation date: Jan 24, 2015 Entry type:
PrivateKeyEntry Certificate chain length: 1 Certificate[1]:
Owner: CN=Unnamed, OU=Mobile Organization, O=My Company, L=San
Francisco, ST=California, C=US Issuer: CN=Unnamed, OU=Mobile
Organization, O=My Company, L=San Francisco, ST=California, C=US
Serial number: 1af9d77f Valid from: Sat Jan 24 23:12:12 GST 2015
until: Wed Jun 11 23:12:12 GST 2042 Certificate fingerprints:
MD5: 20:E1:7D:12:4F:83:2A:37:FB:F5:43:3B:CC:27:88:4B SHA1:
0B:4D:1E:83:2F:91:3A:BD:92:EB:87:62:6D:34:66:9D:6A:51:3B:ED
SHA256:
91:75:AC:BE:C9:74:6F:67:3E:9A:E4:35:04:D4:05:E0:8F:A4:54:30:41:4A
:EB:0A:61:E0:D1:33:7C:D8:0F:82 Signature algorithm name:
SHA256withRSA Version: 3 The line that begins SHA1 contains the
certificate's SHA-1 fingerprint. The fingerprint is the sequence of 20 twodigit hexadecimal numbers separated by colons.
106
Creating an API Project in the Google APIs Console

Important: Before proceeding with this section, make sure that you
have a Google Account.
1. In a browser, navigate to the Google APIs Console.
Note: If you have not used the Google APIs Console before,
you are prompted to create a project that you use to track
your usage of the Google Maps Android API. Click Create
Project to create a new project called API Project. On the
next page, this name appears in the upper left-hand corner.
2. Select Services from the left navigation bar.
The main window displays a list of APIs and services.
3. In the list of services, scroll down until you see Google Maps Android API
v2.
4. To the right of the entry, click the switch indicator so that it is on.
This displays the Google Maps Android API Terms of Service.
5. If you agree to the terms of service, click the checkbox below the terms of
service, and then click Accept.
This returns you to the list of APIs and services.
Requesting a Maps API Key

Now you can request an API key. It is possible to request and register more than
one key per project.
To request an API key
1. Navigate to your project in the Google APIs Console.
2. In the Services page, verify that the "Google Maps Android API v2" is
enabled.
3. In the left navigation bar, click API Access.
4. In the resulting page, click Create New Android Key.
5. In the resulting dialog, enter the SHA-1 fingerprint, then a semicolon, and
then the package name of your application. For example:
0B:4D:1E:83:2F:91:3A:BD:92:EB:87:62:6D:34:66:9D:6A:51:3B:ED;my.co
mpany.Mymap
Important: To get a valid Maps API key, ensure that you use
the exact application's package name. This name uniquely
identifies your application. The package key in the Android
Version Information contains the package name (see the
screenshot under the "To set the apiKey key value"
procedure later in this document).
107
6. The Google APIs Console displays Key for Android apps (with certificates)
followed by a forty-character API key, for example: API key:
AIzaSyCMuJ2w8_gQEedvqUg-9lxWXFg7feAl9PQ
Configuring Specific Project Options

For your Android application to access Google Maps, ensure that you have
configured the following project options and permissions:
o
Enable the Access network stateuses permission.
Enable the Maps Serviceentitlement option.
Set the apiKey key value in the Android Version information.

Important: Before proceeding with this section, in the Project
Manager, set the Target Platform to Android:
108
To check the configured permissions list

1. In the RAD Studio IDE, open Project > Options > Uses Permissions
2. Ensure that the Access network state permission is enabled:
To check the Entitlement List

1. In the RAD Studio IDE, open Project > Options > Entitlement List
2. Ensure that the Maps Service option is enabled:
To set the apiKey key value

1. In the RAD Studio IDE, open Project > Options > Version Info
2. Set the apiKey key to the Maps API key value that you have requested for
your application (see Step 6 in the Requesting a Maps API Key section
earlier in this document).
109
3. Click OK.
Important: For your changes to the project options to take effect,

press Shift + F9 to rebuild your project.
See Also
o
TMapView
Mobile Tutorial: Using a Map Component to Work with Maps (iOS and
Android)
Code Samples
o
Tabbed Map Sample
Map Sample
110
Mobile Tutorial: Using a MultiView Component to Display Alternate Views of Information (iOS and
Android)
Mobile Tutorial: Using a MultiView

Component to Display Alternate
Views of Information (iOS and
Android)
About the TMultiView Component
The FMX.MultiView.TMultiView component represents a container (the master
pane) for other controls, and provides a way for you to easily present alternate
views of information. The TMultiView component allows you to implement a
master-detail interface, which can be used for any supported target platform.
o
The master pane can display a collection of any visual controls, such as
edit boxes, labels, lists, and so forth.
The detail pane typically displays information based on the properties of

the controls in the master pane.
111
Android)
The following screen illustrates an example master-detail interface. In the master

pane (the left docked panel), you enter a geographical position, and then click
Search to cause the detail pane (the right panel) to display the appropriate
Google map.
112
Android)
Master Pane Presentation Modes

The TMultiView class defines a set of properties that allow you to control the
interface behavior. For example, the TMultiView.Mode property specifies the
master pane presentation mode as described in the following table:
TMultiView.Mode
Master Pane Presentation
Drawer
Drawer (Push/Overlap)
Panel
Docked panel
PlatformBehaviour
(see the following table)
Popover
Popup menu
NavigationPane
Navigation pane
Custom
For details, see the Custom Mode subsection.
Note: At design time, after you change the TMultiView.Mode

property value in the Object Inspector, the master pane might
become invisible. To work around this issue, on the Form Designer,
select the TMultiView component, and then in the Object
Inspector, set the Visible property to True.
113
Android)
Drawer Mode
If you set the TMultiView.Mode property to Drawer (using
TDrawerAppearance.Mode=OverlapDetailView), the master pane is initially
hidden. To display the master pane, the user swipes right from the left edge of
the screen, as shown in the following animated image:
114
Android)
Popover Mode
You can also set the TMultiView.Mode property to Popover to make the master
pane a popup menu that is displayed next to the Master button specified in the
TMultiView.MasterButton property.
Important: In the Popover mode, you must set the

TMultiView.MasterButton property. This property refers to a UI
element that displays or hides the master panel. In the above
screen, the Master button is the Show/Hide button.
115
Android)
Navigation Pane Mode

If you set the TMultiView.Mode property to NavigationPane, the master pane is
initially displayed as a minimized docked panel. You can control the initial width
of this panel with the CollapsedWidth property (by default, CollapsedWidth=50).
Initially minimized Navigation Pane
Tip To clip any portion of child elements moved outside the

minimized Navigation Pane, set the TMultiview.ClipChildren
property to True.
To expand the navigation panel to display all child controls, tap the Master
button specified in the TMultiView.MasterButton property.
116
Android)
Expanded Navigation Pane
Important: In the Navigation Pane mode, you must set the

TMultiView.MasterButton property. This property refers to a UI
element that collapses or expands the master panel. In the above
screen, the Master button is the
117
Android)
Platform Dependent Behavior Mode

You can let the application automatically select the master pane presentation
mode, if the TMultiView.Mode property is set to PlatformBehaviour. For this
setting, the application behavior depends on the device type and orientation,
as described in the following table:
Device Type
Device Orientation
Master Pane Presentation
Phone
Landscape, Portrait Drawer (push/overlap)
Tablet
Landscape
Docked panel
Tablet
Portrait
Drawer (push/overlap)
118
Android)
Custom Mode
In Custom mode, you can customize the master pane presentation to conform
to your tasks. To customize the master pane presentation, perform the following
basic steps:
1. Declare your own class, such as MyPresentationClass that descends from
TMultiViewPresentation or from other classes that were declared in the
FMX.MultiView.Presentations unit.
2. In the MyPresentationClass, optionally, override the following virtual
methods defined in the base class:
DoOpen
DoClose
GetDisplayName
DoInstall
DoUninstall
These methods define the master pane behavior.
3. In the Form Designer, select the TMultiView component, and then in the
Object Inspector, set its property Mode to Custom.
4. Implement the onFormCreate event handler as follows:
For Delphi:

begin
MultiView1.CustomPresentationClass := MyPresentationClass;
end;
For C++:

{
MultiView1->CustomPresentationClass = __classid(MyPresentationClass);
}
This topic helps you develop a simple application that illustrates the use of the
TMultiView component.
119
Android)

Application
Application
2. Select the TMultiView component in the Tool Palette, and drop it on the
Form Designer.
3. Drop other controls, such as buttons, edit boxes or any other controls you
need onto the MultiView container.
4. In the Tool Palette, select a component you want to use as a detail pane
(such as TPanel), and drop any controls onto this panel.
5. In the Object Inspector, specify the appropriate properties of the
TMultiView component.
To clarify this procedure, the following sections consider a particular example: an
application that controls the mobile device camera.
Designing the Master Pane

1. Select the TMultiView component in the Tool Palette, and drop it on the
Form Designer.
2. Drop two TButton components into the TMultiview container, and then in
the Object Inspector specify the following properties of those buttons:
Set the Name property to bStartCamera and bStopCamera,

respectively.
Set the Text property to Start Camera and Stop Camera,

respectively.
3. Drop a TLabel component into the TMultiview container, and then in the
Object Inspector, set its Text property to Camera type:.
4. Drop two TButton components into the TMultiview container, and then in
the Object Inspector specify the following properties of those buttons:
Set the Name property to bFrontCamera and bBackCamera,

respectively.
Set the Text property to Front and Back, respectively.
120
Android)
Designing the Detail Pane

1. Select the TPanel component in the Tool Palette, and drop it on the Form
Designer.
2. In the Object Inspector, set the TPanel.Align property to Client.
3. Drop the TCameraComponent into the TPanel container.
4. Drop the TImage into the TPanel container, and set the following
properties:
Name = imgCameraView
Align = Client
Tip: Put all elements of the details pane into a unique container (a
TPanel component in our example). This container should be
specified in the TMultiView.TargetControl property.
Implementing the Camera Buttons Functionality

handlers for the application buttons and the GetImage private method that gets
an image from the device camera.
121
Android)
To implement the OnClick event handlers

1. On the Form Designer, double-click the Start Camera button, and insert
the following code:
For Delphi:
procedure TForm1.bStartCameraClick(Sender: TObject);

begin
CameraComponent1.Active := true;
end;
For C++:
void __fastcall TForm1::bStartCameraClick(TObject *Sender)

{
CameraComponent1->Active = true;
}
2. Double-click the Stop Camera button, and insert the following code:
For Delphi:
procedure TForm1.bStopCameraClick(Sender: TObject);

begin
CameraComponent1.Active := false;
end;
For C++:
void __fastcall TForm1::bStopCameraClick(TObject *Sender)

{
CameraComponent1->Active = false;
}
122
Android)
3. Double-click the Front button, and insert the following code:
For Delphi:
procedure TForm1.bFrontCameraClick(Sender: TObject);

begin
CameraComponent1.Active := False;
CameraComponent1.Kind := FMX.Media.TCameraKind.FrontCamera;
CameraComponent1.Active := True;
end;
For C++:
void __fastcall TForm1::bFrontCameraClick(TObject *Sender) {

// select Front Camera
CameraComponent1->Kind = TCameraKind::FrontCamera;
}
4. Double-click the Back button, and insert the following code:
For Delphi:
procedure TForm1.bBackCameraClick(Sender: TObject);

begin
CameraComponent1.Active := False;
CameraComponent1.Kind := FMX.Media.TCameraKind.BackCamera;
CameraComponent1.Active := True;
end;
For C++:
void __fastcall TForm1::bBackCameraClick(TObject *Sender) {

// select Back Camera
CameraComponent1->Kind = TCameraKind::BackCamera;
}
123
Android)
To implement the onSampleBufferReady event handler

o
In the Form Designer, double-click the CameraComponent1 and

implement the following code:
For Delphi:
procedure TForm1.CameraComponent1SampleBufferReady(Sender: TObject;

const ATime: Int64);
begin
TThread.Synchronize(TThread.CurrentThread, GetImage);
end;
For C++:
void __fastcall TForm1::CameraComponent1SampleBufferReady(TObject

*Sender,
const __int64 ATime)
{
GetImage();
}
For the TForm1 class, you should implement the private method GetImage. The
onSampleBufferReady event handler calls this method to get the image from the
device camera.
124
Android)
Do the following:
1. In the private section of the TForm1 class, declare the GetImage method:
For Delphi:
private
procedure GetImage;
For C++:
In the header file (.h file), add the following code:
private:
void __fastcall GetImage();
2. Implement the GetImage method as follows:
For Delphi:
procedure TForm1.GetImage;
begin
CameraComponent1.SampleBufferToBitmap(imgCameraView.Bitmap, True);
end;
For C++:
void __fastcall TForm1::GetImage()

{
CameraComponent1->SampleBufferToBitmap(imgCameraView->Bitmap,
true);
}
125
Android)
Setting the TMultiView Component Properties

In the Form Designer, select the TMultiView component, and then in the Object
Inspector, set the following properties:
o
TargetControl = Panel1
Mode = Drawer
Visible = True
Expand the DrawerOptions node, and set the Mode property to

OverlapDetailView.
Expand the ShadowOptions node, and set the Color property to Beige.
(This property defines the color of the master panel shadow. You can use
any available color.)
Running the Example Application

Android or iOS).
3. To open the master panel, swipe right from the left edge of the device
screen.
4. To activate the device camera, on the master panel, click Start Camera.
126
Android)
5. Optionally, you can select the front or back camera (if available) by using
the Front or Back button, respectively.
To close the master panel, slide it left.
Mobile Product Samples that Use TMultiView

Go to the Mobile Samples folder in
C:\Users\Public\Documents\Embarcadero\Studio\18.0\Samples.
o
MultiView Demo sample
Location Demo sample
Music Player sample
REST Surf Spot Finder sample (Delphi)
REST Surf Spot Finder sample (C++)
See Also
o
FMX.MultiView.TMultiView
FMX.MultiView.TMultiViewPresentation
FireMonkey Native iOS Controls
127
Mobile Tutorial: Using the Web Browser Component (iOS and Android)
Mobile Tutorial: Using the Web

Browser Component (iOS and
Android)
FireMonkey wraps the Web Browser component as the TWebBrowser
component. You can use TWebBrowser in desktop apps as well as mobile apps,
but this topic describes how to create a simple FireMonkey Web Browser
application for iOS and Android platforms.
128
Design the User Interface

1. Select either:

Application
2. Select the TToolBar component in the Tool Palette, and drop it on the
Form Designer.
To find TToolBar, enter a few characters (such as "tool") in the Search box of the
Tool Palette:
3. After you drop the component, you can see the TToolBar component at
the top of the Form Designer. Here is a screenshot after setting the iOS
style in the Form Designer:
4. Select the TButton component in the Tool Palette and drop it on the
TToolBar.
129
5. Select the TButton component on the Form Designer, and then in the
Object Inspector, set the StyleLookup property to priortoolbutton.
The priortoolbutton StyleLookup value for TButton adds a Back

button label. On iOS devices, the label is similar to the following
image:
For more detail about selecting a style in multi-device applications,

see Mobile Tutorial: Using a Button Component with Different Styles
(iOS and Android).
6. Select the TEdit component in the Tool Palette and drop it on the TToolBar.
Make sure that the size of the Edit control is wide enough to fill the area of
the TToolBar:
7. Select the Edit box on the Form Designer, and then in the Object
Inspector, set the ReturnKeyType property to Done, the KeyboardType
property to URL, and the KillFocusByReturn property to True.
For more information about selecting the most appropriate Virtual Keyboard
type in mobile platforms, see Selecting the Proper Virtual Keyboard for the Web
Browser Application.
8. Select the TWebBrowser component in the Tool Palette and drop it on the
form.
9. Select the Web Browser component on the Form Designer, go to the
Object Inspector and select Client for the Align property.
130
After you complete these steps, the form should be similar to the following
picture:
131
Write an Event Handler to Open a Web Page when

the User Changes the URL in the Edit Control
Unlike desktop platforms, mobile platforms use the Virtual Keyboard to enter text
as in the following images. The user can complete the action by clicking "Done".
iOS
Android
iPad
Android (LG - E612
FireMonkey provides many types of event handlers to cover most actions taken
by users. After the "Done" button is selected, the FireMonkey framework sends an
OnChange event to the TEdit control. On the other hand, there is no specific
event for the "Back" button. In this section, you implement event handlers to
support both scenarios.
132
Implement a Common Method to Open a Web Page

Before implementing event handlers, first implement a common method to open
a Web page based on the Text property of the Edit control.
1. In the private section of the TForm1 class, declare the OpenURL method:
Delphi:
private
procedure OpenURL;
C++Builder:
private:
void __fastcall openURL();
2. Implement the openURL method as follows:

Delphi:
procedure TForm1.OpenURL;
begin
WebBrowser1.Navigate(Edit1.Text);
end;
C++Builder:
void __fastcall TForm1::openURL()
{
WebBrowser1->Navigate(Edit1->Text);
}
133
Implement an Event Handler for the OnChange Event

1. Create the event handler by selecting the Edit component (in the Form
Designer), and then double-clicking the white space next to the
OnChange event (in the Object Inspector's Events tab).
The Object Inspector creates a new event handler called Edit1Change:
2. Complete the event handler by adding the following code:

Delphi:
procedure TForm1.Edit1Change(Sender: TObject):
begin
OpenURL;
end;
C++Builder:
void __fastcall TForm1::Edit1Change(TObject *Sender)
{
openURL();
}
134
Implement an Event Handler for the Back Button

To implement the Back button for your Web Browser, you can simply call the
GoBack method on the Web Browser component:
Delphi:
begin
WebBrowser1.GoBack;
end;
C++Builder:
void __fastcall TForm1::Button1Click(TObject *Sender)
{
WebBrowser1->GoBack();
}
The basic behavior is now implemented for this Web Browser application. Try
running your application on your Android device, the iOS Simulator, or your iOS
device.
135
Selecting the Proper Virtual Keyboard for the Web

Browser Application
After you run your first Web Browser application, you might realize that the Virtual
Keyboard is not optimized.
iOS provides several virtual keyboards as follows:
Alphabet:
Default:
EmailAddress:
NumberPad:
NumbersAndPunctuation: PhonePad:
NamePhonePad:
URL:
Android provides several virtual keyboards as follows:

Alphabet:
Default:
NumberPad:
NumbersAndPunctuation: PhonePad:
EmailAddress:
NamePhonePad:
URL:
136
The most appropriate Virtual Keyboard type for Web Browser components is URL.
As we have already discussed in Design the User Interface, the following steps set
the URL as the Virtual Keyboard type for the Web Browser component in this
example. Select the Edit box on the Form Designer, and then in the Object
Inspector, set the KeyboardType property to URL.
137
WebBrowser Mobile Code Snippet

The WebBrowser project in Mobile Code Snippets demonstrates the functionality
described in this tutorial.
You can find the WebBrowser project at:
o
Start | Programs | Embarcadero RAD Studio 10.1 Berlin | Samples and

navigate to \Object Pascal\Mobile Snippets\WebBrowser
Subversion
Repository:http://sourceforge.net/p/radstudiodemos/code/HEAD/tree/br
anches/RADStudio_Berlin/Object%20Pascal/Mobile%20Snippets/WebBrow
ser
See Also
o
Mobile Tutorial: Using Combo Box Components to Pick Items from a List
(iOS and Android)
FMX.KeyboardTypes Sample
TWebBrowser
TToolBar
TButton
TEdit
KeyboardType
StyleLookup
138
Mobile Tutorial: Using Tab

Components to Display Pages (iOS
and Android)
Tabs are defined by FMX.TabControl.TTabControl, which is a container that can
hold several tab pages. Each tab page can contain any control as a UI element.
You can hide the tab for these pages, and change pages without showing tabs.
For each tab, you can specify:

o
A text label for both iOS and Android
Predefined icons for iOS only
Custom icons for both iOS and Android
Using the Native Style for Tabs on iOS and Android

This tutorial shows tabs with the same style on both iOS and Android, but this
practice is not recommended.
We recommend that you observe the native style of each platform, as follows:
o
On Android:
Tabs are commonly placed at the top of the screen (so you should
set TTabPosition either to Top or to PlatformDefault).
Tabs traditionally display only text. However, FireMonkey allows you

to specify custom icons to be displayed on tabs (see Using Custom
Multi-Resolution Icons for Your Tabs).
139
On iOS:
Tabs are typically shown at the bottom of the screen (so you should
set TTabPosition either to Bottom or to PlatformDefault).
Tab items always display both text and an icon, which can be set
via the StyleLookup property for each tab.
Note: You can use the PlatformDefault value of the TTabPosition

enumeration to set the tab position according to the default
behavior of the target platform. When PlatformDefault is set for
TTabPosition:
o
In iOS apps, tabs are aligned at the lower edge of the

TTabControl.
In Android apps, tabs are aligned at the top edge of the

TTabControl.
Designing Tab Pages Using the Form Designer

To create tab pages in your application, use the TTabControl component with
the following steps:
1. Select:
Application
Application
2. Select TTabControl from the Tool Palette:
140
3. After you drop the TTabControl, an empty TabControl is shown on the Form
Designer (you might need to manually adjust the position of the
TabControl):
141
4. Typically, applications that use TabControl use the full screen to show
pages.
To do this, you need to change the default alignment of TabControl. In
the Object Inspector, change the Align property of TabControl to Client:
5. Right-click the TabControl, and select Items Editor... from the context
menu:
142
6. Click Add Item three times, so that now you have three instances of
TabItem here. Close the dialog box.
7. On the Form Designer, select the first TabItem and change its StyleLookup
property:
iOS
143
Android
9. You can place any component on each page.

To move to a different page, just click the tab you want on the Form
Designer, or change the ActiveTab property in the Object Inspector:
144
10. To change the location of tabs, select the TabPosition property for the
TabControl component, and set it to one of the following values in the
Object Inspector:
145
Comparing the Tab Settings on iOS and Android

The following figures show both apps with the same TabPosition settings (Top,
Bottom, Dots, and None) on iOS and Android.
However, you should set the appropriate different tab settings for each mobile
platform, as indicated in #Using the Native Style for Tabs on iOS and Android.
Top
iOS
Android
Tabs are displayed at the Top.
146
Bottom
iOS
Android
Tabs are displayed at the Bottom.
147
Dots
iOS
Android
No Tabs are displayed.

Instead, three Dots ([...]) are displayed to indicate additional pages.
148
None
iOS
Android
No Tabs or Dots are displayed at run time, although you can see them at design time.
Page can be changed only through code or action.
149
Platform Default
iOS
Android
Tabs are displayed with their platform default settings.
150
Using Custom Multi-Resolution Icons for Your Tabs

You can use custom multi-resolution icons as well as custom text on tabs in your
application.
This tutorial shows you how to construct the following three tabs that have
custom icons and text:
Notes:
o
In Android apps, predefined icons are not supported, so you must use
custom icons.
In iOS apps, you can use either predefined icons or custom icons.
To use custom icons on either iOS or Android, select the appropriate iOS or
Android Style in the Form Designer, set the StyleLookup property of
TTabItem to tabitemcustom, specify your custom icon as described in this
section, and then build your app.
For iOS, you can use our predefined icons by setting the StyleLookup
property of TTabItem to the icon of your choice, such as
(tabitemsearch).
The custom glyphs used in this section are available in a zip file that is
delivered in your C:\Program Files
(x86)\Embarcadero\Studio\18.0\Images\GlyFX directory.
The three PNGs used here are located in the Icons\Aero\PNG\32x32
directory:
users_32 (People)
unlock_32 (Security)
tree_32 (Organization)
Unzip the glyFX.zip file before you use the MultiResBitmap Editor if you want to
use these images or any others available in the GlyFX collection.
151
Displaying Multi-Resolution Custom Icons on Tabs

1. In the Object Inspector, select TabItem1, and then change the tab
caption, which is specified in the Text property to People; change the Text
property of TabItem2 to Security, and TabItem3 to Organization.
2. Select a tab, and click the ellipsis button [...] on the CustomIcon property
of TTabItem in the Object Inspector:
3. The MultiResBitmap Editor opens:
152
4. Ensure that you are in the Master view, and in the MultiResBitmap Editor,
click the array next to Custom size, and then choose Default size.
5. Repeat the following steps to add any additional scales that you want to
support:
1. In the MultiResBitmap Editor, click
(Add new item).
2. Enter the additional Scale you want to support, such as 1.5, 2, or 3.
When you have added all the scales you want, the editor
looks like this:
153
6. Click the Fill All from File button

to use, and then click Open.
, navigate to an image file you want
The selected image now appears appropriately scaled in each of the Scale
entries on the MultiResBitmap Editor:
7. Close the MultiResBitmap Editor.

8. Repeat Steps 2 to 7 for each of the remaining tabitems, and assign each
tabitem a custom icon image.
After you define a custom icon, the FireMonkey framework generates a Selected
Image and Non-Selected (dimmed) Image based on the given .png file. This
transformation is done using the Alpha-Channel of the bitmap data. For
example:
Original Image Selected Image Non-Selected Image
154
Using a Single-Resolution Bitmap for a Custom Icon

You can also use only a single-resolution bitmap by using the Bitmap Editor. A
single-resolution bitmap displays only one scale in the Structure View:
To specify a single-resolution bitmap for a custom icon, perform the first step of
the procedure above and then proceed as follows:
1. In the Structure View, select Empty under CustomIcon:
2. Now, in the Object Inspector, click the ellipsis button [...] in the Bitmap field
(of the TabItem1.CustomIcon[0]). This opens the Bitmap Editor:
155
3. In the Bitmap Editor, click the Load... button, and select a PNG file.
The recommended size is 30x30 pixels for normal resolution, and 60x60
pixels for high resolution:
4. Click OK to close the Bitmap Editor.

5. In the Object Inspector, set the StyleLookup property to be
tabitemcustom:
156
Defining Controls within a TabControl

As discussed, each Tab Page can contain any number of controls including
another TabControl. In such a case, you can easily browse and manage
different tab pages in the Structure View:
iOS
157
Android
158
Changing the Page at Run Time

By the User Tapping the Tab
If Tabs are visible (when the TabPosition property is set to other than None), an
end user can simply tap a Tab to open the associated page.
By Actions and an ActionList

An action corresponds to one or more elements of the user interface, such as
menu commands, toolbar buttons, and controls. Actions serve two functions:
o
Actions represent properties common to the user interface elements, such

as whether a control is enabled or whether a check box is selected.
Actions respond when a control fires, for example, when the application
user clicks a button or chooses a menu item.
159
Here are the steps to enable a user to move to different tab pages by clicking a
button:
1. On the Form Designer, click TabItem1 to select it.
2. From the Tool Palette, add a TActionList component to the form, and then
add a TButton to TabItem1:
160
3. With the button selected, in the Object Inspector, select Action | New
Standard Action | Tab > TChangeTabAction from the drop-down menu.
After the user clicks this button, the action you just defined is performed
(the tab page changes):
161
4. Select ChangeTabAction1 in the Structure View, and then select TabItem2

for the Tab property in the Object Inspector. By linking to TabItem2, this
action can change the page to TabItem2:
162
5. With the previous step, the caption (the Text property) of the button is
automatically changed to "Go To Security" because the caption of
TabItem2 is "Security" in our example. Set the CustomText property of the
ChangeTabAction1 component to Security as shown below and change
the size of the button to fit the new caption text, if required.
6. ChangeTabAction also supports the Slide animation to indicate a

transition between pages. To use it, set the Transition property to Slide:
7. On the Form Designer, select TabItem2 and drop two TButtons from the
Tool Palette to TabItem2.
163
8. On the Form Designer, select Button2 and in the Object Inspector, select
Action | New Standard Action | Tab > TPreviousTabAction from the dropdown menu.
9. On the Form Designer, select Button3 and in the Object Inspector, select
Action | New Standard Action | Tab > TNextTabAction from the dropdown menu.
10. Select PreviousTabAction1 in the Structure View and in the Object
Inspector, set its TabControl property to TabControl1.
11. Select NextTabAction1 in the Structure View and in the Object Inspector,
set its TabControl property to TabControl1.
12. On the Form Designer, select TabItem3 and drop a TButton from the Tool
Palette to TabItem3.
13. In the Object Inspector, set the Action property of the button to
PreviousTabAction1.
164
By Source Code
You can use any of the following three ways to change the active tab page
from your source code, by clicking the button.
Assign an Instance of TTabItem to the ActiveTab Property

1. From the Tool Palette, add a TButton to TabItem3.
2. In the Object Inspector, set its Text property to Go To People.
3. On the Form Designer, double-click the button to create the OnClick

event handler and add the following code:
Delphi:
TabControl1.ActiveTab := TabItem1;
C++:
TabControl1->ActiveTab = TabItem1;
165
Change the TabIndex Property to a Different Value

The TabIndex property is a zero-based Integer value. You can specify any
number between 0 and TabControl1.TabCount - 1.
1. From the Tool Palette, add a TButton to TabItem1.
2. In the Object Inspector, set its Text property to Go To Organization.
3. On the Form Designer, double-click the button to create the OnClick

event handler and add the following code:
Delphi:
TabControl1.TabIndex := 2;
C++:
TabControl1->TabIndex = 2;
166
Call the ExecuteTarget Method of a Tab Action

You can call the ExecuteTarget method for any of the tab control actions
(TChangeTabAction, TNextTabAction, and TPreviousTabAction). You must ensure
to define the TChangeTabAction.Tab, TPreviousTabAction.TabControl or the
TNextTabAction.TabControl properties.
Delphi:
// You can set the target at run time if it is not defined yet.
ChangeTabAction1.Tab := TabItem2;
// Call the action
ChangeTabAction1.ExecuteTarget(nil);
C++:
// You can set the target at run time if it is not defined yet.
ChangeTabAction1->Tab = TabItem2;
// Call the action
ChangeTabAction1->ExecuteTarget(NULL);
See Also
o
Android)

and Android)
Mobile Tutorial: Using LiveBindings to Populate a ListView (iOS and

Android)
Samples
o
Tab Sliding
167
Mobile Tutorial: Using LiveBindings to Populate a ListView (iOS and Android)
Mobile Tutorial: Using LiveBindings

to Populate a ListView (iOS and
Android)
This tutorial shows how to use LiveBindings Designer to populate a FireMonkey
ListView component from a TPrototypeBindSource containing some sample data.
The tutorial shows you how to add the sample data and how to make the
bindings between the prototyping source and the list view component in order
to fill the list.
Like every LiveBinding, this tutorial requires no code. However, in order to create
a useful application, you do need to add event handlers and other code.
Step 1: Creating the Project

1. Create a new project. Choose a Multi-Device Application for this
example. In the wizard, choose Blank Application.
168
2. In the Tool Palette, locate a TListView component and drop it onto the
form.
3. Add a TPrototypeBindSource component to the form.
4. On the form, select the ListView1 component, and then in the Object
Inspector, set the Align property to Client and the SearchVisible property
to True.
The form should now look like the following screen, before you set the Style or
View in the Form Designer:
Note: For more information about the selection of the Style and Views, see Style
Selector and Using FireMonkey Views.
169
Step 2: Adding Fields

1. Right-click the TPrototypeBindSource component and then select Add
Field....
2. From the Add Field dialog box, select ColorsNames and click OK.
170
Step 3: Creating LiveBindings

1. Open the LiveBindings Designer (choose View > LiveBindings Designer),
and drag the ColorsName1 property of the TPrototypeBindSource onto the
Item.Text property of the ListView to bind these properties.
The ListView component automatically populates its items with color names from
the prototyping data component:
171
2. Set TListView.ItemAppearance to ImageListItemRightButton, as follows:
Place focus on the ListView component by selecting it (in the

Structure View, the Form Designer, or the Object Inspector).
Then, in the Object Inspector, locate the ItemAppearance node,

expand it and change the ItemAppearance property to
ImageListItemRightButton:
3. Optionally, you can apply a tint to the TListView text buttons. Do the
following:
Place focus on the ListView component by selecting it (in the

Structure View, the Form Designer, or the Object Inspector).
In the Structure View, under ItemAppearance, expand Item and

then select TextButton.
In the Object Inspector, locate the TintColor property and set its
value to an appropriate value, such as Seagreen.
The following image shows both the Structure View and the Object Inspector. In
the Structure View, Item is expanded and TextButton is selected, and in the
Object Inspector, TintColor is set to Seagreen:
172
Note: At design time, the tint color that you applied to text buttons
might not be visible. To make your changes visible, choose the
Master view in the Style selector to change the current style of your
Form Designer to either Android or iOS. For details, see Form
Designer.
At this point in the tutorial, you have configured the ListView component to
display an image on the left-hand side of the item text, and to display a button
on the right-hand side of the item text.
In the next step, you populate the image and the button with sample data.
Step 4: Adding More Fields (Bitmaps, Currency)

You need to add two more fields in order to make the list view component
display an image and some text on the button associated with each list item.
1. Right-click the TPrototypeBindSource component and select Add Field....
2. In the Add Field dialog box, Ctrl+Click to select Bitmaps and Currency
field data. When finished, click OK.
173
3. Go to the LiveBindings Designer and do the following:

1. Connect the Bitmap1 property of the prototyping source data to
the Item.Bitmap property of the list view component.
This step adds a button representing the color and number of each list view item,
such as Blue 19.
2. Connect the CurrencyField1 property from the prototyping source
data to the Item.ButtonText property of the list view component.
This step displays the currency field value on the button located on the righthand side of each list view item.
Now the list view displays some color data associated with each item and also
displays sample currency data on the button associated with each list item.
174
Step 5: Adding the onButtonClick Event Handler

To create a usefull application, you can add the onButtonClick event handler
that fires when you click a ListView item.
To add the onButtonClick event handler
1. On the multi-device application form, select the ListView1 component.
2. In the Object Inspector, open the Events tab, and then double-click
OnButtonClick.
3. In the Code Editor, implement an appropriate OnButtonClick event
handler.
The following sample code adds the event handler that displays a message box
when you click a ListView item:
Delphi:
procedure TForm1.ListView1ButtonClick(const Sender: TObject;
const AItem: TListViewItem; const AObject: TListItemSimpleControl);
begin
ShowMessage(AItem.Text + ' ' +AItem.ButtonText + ' is clicked.');
end;
C++Builder:
void __fastcall TForm1::ListView1ButtonClick(TObject * const Sender,
TListViewItem * const AItem, TListItemSimpleControl * const AObject) {
ShowMessage(AItem->Text + " " + AItem->ButtonText + " is clicked.");
}
The Results
To see your mobile app as it would appear on a mobile device, you need to
configure your system as described in the appropriate Setup tutorial, available
here, and set the View to a target mobile device (such as iPhone 4") in the Form
Designer. Then you need to complete the necessary steps for deploying your
app to the target mobile platform.
Then you can run the application on your mobile device, either by pressing F9 or
by choosing Run > Run.
175
iOS
iPad
Android
Galaxy S4
If you click the Blue item, the application displays the following message box:
176
See Also
o
Mobile Tutorial: Using LiveBindings to Populate a ListBox in Mobile

Applications (iOS and Android)
Mobile Tutorial: Using Layout to Adjust Different Form Sizes or Orientations

(iOS and Android)
Customizing FireMonkey ListView Appearance
FMX.ListView.TListView
TPrototypeBindSource
LiveBindings in RAD Studio
LiveBindings Designer
Using FireMonkey Views
RAD Studio Tutorials
177
Mobile Tutorial: Using ListBox Components to Display a Table View (iOS and Android)
Mobile Tutorial: Using ListBox

Components to Display a Table View
(iOS and Android)
Using ListBox Components to Display a Table View in
Mobile Platforms
On the mobile platform, FireMonkey uses the FMX.ListBox.TListBox component to
present a Table View in a mobile style, like the following ListBoxes.
Note:FMX.ListBox.TListBox performance can be slow on mobile. Use
TListView if you want to develop more complex applications,
especially apps with large databases.
Plain List
iOS
Android (LG E-612)
178
Grouped List
179
Search Box
You can add a search box to a ListBox. With a search box, users can easily
narrow down a selection from a long list as in the following pictures.
This tutorial describes the basic steps to build items for a Table View in your multidevice applications for mobile platforms.
180
Create Items on the ListBox Component

1. Select:
Application
For C++Builder: File > New > Multi-Device Application - C++Builder

> Blank Application
2. Select the TListBox component in the Tool Palette, and drop it on the Form
Designer. To find TListBox, enter a few characters (such as "TList") in the
Search box of the Tool Palette:
3. Select the TListBox component on the Form Designer, go to the Object

Inspector and select Client for the Align property.
181
4. On the Form Designer, right-click the TListBox component, and select

Items Editor:
5. On the Items Designer, click the Add Item button several times to add
several items to the ListBox:
182
6. Close the Items Designer. Now you can find your ListBox Items on the
TListBox component. For example:
Add a Header
You can define a Header on the TListBox component by using the following
steps:
A Header for a TListBox

1. On the Form Designer, right-click the TListBox component, and select Add
Item > TListBoxHeader:
183
2. On the Tool Palette, select the TLabel component and drop it on top of
the TListBoxHeader component you just added:
3. In the Object Inspector, change the properties of the TLabel component

as follows:
Property
Value
Align
Client
StyleLookup
toollabel
TextSettings.HorzAlign
Text
Center
(Text value as you want)
Add a Group Header/Footer to the List

You can define a Group Header and a Group Footer for items on TListBox as
follows:
1. On the Form Designer, right-click the TListBox component, and select

Items Editor.
184
2. On the Item Designer, select TListBoxGroupHeader from the drop-down

list, and then select Add Item:
3. Select TListBoxGroupFooter from the drop-down list, and then select Add
Item.
4. Select ListBoxGroupHeader1 in the list of items, and click the Up button
several times until this item becomes the top item on the list:
5. Close the dialog box. Now you have a Group Header and a Group Footer
on the TListBox component.
185
Show List Items as Separate Grouped Items

Items on a ListBox can be shown as either a Plain list or a Grouped list. This choice
is controlled by the GroupingKind property and the StyleLookup property, as
shown in the following graphic:
Show Items as Plain List
Plain = GroupingKind Property Value
listboxstyle = StyleLookup Property

Value
Show Items as Grouped List
Grouped = GroupingKind Property

Value
transparentlistboxstyle = StyleLookup
Property Value
You can select the GroupingKind property and the StyleLookup property in the
Object Inspector when the ListBox is selected in the Form Designer.
Add a Check Box or Other Accessory to a ListBox Item

Each item in a TListBox can use an Accessory such as Check Mark through the
ItemData.Accessory property. The following picture shows the value you can
assign to ItemData.Accessory and the Accessory assigned:
186
You can select the Accessory property in the Object Inspector when ListBox Item
is selected in the Form Designer.
Add an Icon to a ListBox Item

Each Item on a ListBox component can contain Bitmap data, as an Icon,
through the ItemData.Bitmap property:
You can select the Bitmap property in the Object Inspector when the ListBoxItem
is selected in the Form Designer.
In order to view the Icon, you must select a StyleLookup which supports the
Bitmap property. Change the StyleLookup property to listboxitemleftdetail.
Add Detail Information to an Item

You can add additional text information to each item on the ListBox component.
187
Specify additional text in the ItemData.Detail property, and select the location of
the Detail Text through the StyleLookup property, as shown in the following table:
StyleLookup property
Look & Feel
listboxitemnodetail
listboxitembottomdetail
listboxitemrightdetail
listboxitemleftdetail
Running Your Application

Run the application either by choosing Run > Run or by pressing F9.
Create Your ListBox Application

1. Select:
Application
For C++Builder: File > New > Multi-Device Application - C++Builder

> Blank Application
Designer.
3. Select the TListBox component on the Form Designer, go to the Object
Inspector and select Client for the Align property.
188
Add Items to a ListBox from Your Code

To add regular items to a ListBox, you can simply call the Items.Add method as
shown in the following code snippet:
o
Delphi:
ListBox1.Items.Add('Text to add');
C++:
ListBox1->Items->Add("Text to add");
If you want to create items other than a simple item, or control other properties,
you can create an instance of the item first, and then add it to the list box.
The following sample codes add items to a ListBox, as shown in the picture:
iOS
Android (LG E-612)
189
Delphi:
var
c: Char;
i: Integer;
Buffer: String;
ListBoxItem : TListBoxItem;
ListBoxGroupHeader : TListBoxGroupHeader;
begin
for c := 'a' to 'z' do
begin
// Add header ('A' to 'Z') to the List
ListBoxGroupHeader := TListBoxGroupHeader.Create(ListBox1);
ListBoxGroupHeader.Text := UpperCase(c);
ListBox1.AddObject(ListBoxGroupHeader);
// Add items ('a', 'aa', 'aaa', 'b', 'bb', 'bbb', 'c', ...) to the list
for i := 1 to 3 do
begin
// StringOfChar returns a string with a specified number of repeating
characters.
Buffer := StringOfChar(c, i);
// Simply add item
// ListBox1.Items.Add(Buffer);
// or, you can add items by creating an instance of TListBoxItem by
yourself
ListBoxItem := TListBoxItem.Create(ListBox1);
ListBoxItem.Text := Buffer;
// (aNone=0, aMore=1, aDetail=2, aCheckmark=3)
ListBoxItem.ItemData.Accessory := TListBoxItemData.TAccessory(i);
ListBox1.AddObject(ListBoxItem);
end;
end;
ListBox1.EndUpdate;
end;
190
C++:
{
char c;
int i;
String Buffer ;
TListBoxItem *ListBoxItem ;
TListBoxGroupHeader *ListBoxGroupHeader
for (c = 'a'; c <= 'z'; c++)
{
// Add header ('A' to 'Z') to the List
ListBoxGroupHeader = new TListBoxGroupHeader(ListBox1);
ListBoxGroupHeader->Text = UpperCase(c);
ListBox1->AddObject(ListBoxGroupHeader);
// Add items ('a', 'aa', 'aaa', 'b', 'bb', 'bbb', 'c', ->->->) to the
list
for (i = 1; i < 4; i++)
{
// StringOfChar returns a string with a specified number of repeating
characters->
Buffer = StringOfChar(c, i);
// Simply add item
// ListBox1->Items->Add(Buffer);
// or, you can add items by creating an instance of TListBoxItem by
yourself
ListBoxItem = new TListBoxItem(ListBox1);
ListBoxItem->Text = Buffer;
// (aNone=0, aMore=1, aDetail=2, aCheckmark=3)
ListBoxItem->ItemData->Accessory =
static_cast<TListBoxItemData::TAccessory>(i);
ListBox1->AddObject(ListBoxItem);
};
};
}
191
Create an Overflow Menu

An overflow popup menu is accessed via the Action Bar and is used to provide
access to additional items or items that are used less often.
In FireMonkey, you can easily implement an overflow menu using TListBox:
1. Add a TToolBar component on the form and set the alignment to Top.
2. Place three TSpeedButton components on the TToolBar component:
For the first TSpeedButton:
Set the Align property to Left.
Change the Name property to OrganizeButton.
Set the StyleLookup to organizetoolbutton.
For the second TSpeedButton:
Set the Align property to Right.
Change the Name property to OverflowButton.
Select detailstoolbutton for the StyleLookup property.
For the last TSpeedButton:
In Object Inspector expand the Margins node and set the

Right margin to 5.
Change the Name property to SearchButton.
Set the StyleLookup to searchtoolbutton.
3. Drop a TListBox to the form.
Add five TListBoxItem from Items Editor.
Check akTop and akRight from the Anchors property of the TListBox
component.
Set Height to 220.
Change Name to OverflowMenu.
Set the Visible property to False.
192
4. For the first four TListBoxItem components in TListBox go to Object

Inspector, expand ItemData:
Define the Bitmap property.
Change the Text property to the text value that you want.
Select listboxitemleftdetail for the StyleLookup property.
5. For the last TListBoxItem, in the Object Inspector expand ItemData:
Set Accessory to aMore and Text to More.
6. Add a TShadowEffect component to the overflow menu.

Structure View
Android LG-E612
193
Creating the Event Handler for the Overflow Button

In the Form Designer, double-click the OverflowButton component. Add the
following code to this event handler:
o
Delphi:
procedure TForm1.OverflowButtonClick(Sender: TObject);

begin
OverflowMenu.Visible := not OverflowMenu.Visible; //change the visibility
status
if OverflowMenu.Visible then // the Overflow Menu is displayed
begin
OverflowMenu.BringToFront;
OverflowMenu.ItemIndex := -1; // the ItemIndex property specifies the
currently selected item(default value is -1 that means that no item is
selected)
OverflowMenu.ApplyStyleLookup;
OverflowMenu.RealignContent; // realigns the children TListBoxItem controls
of the OverflowMenu TListBox
end;
end;
C++:
void __fastcall TForm1::OverflowButtonClick(TObject *Sender)

{
OverflowMenu->Visible = !(OverflowMenu->Visible); //change the
visibility status
if (OverflowMenu->Visible) {
// the Overflow Menu is
displayed
OverflowMenu->BringToFront();
OverflowMenu->ItemIndex = -1; // the ItemIndex property
specifies the currently selected item(default value is -1 that means that no
item is selected)
OverflowMenu->ApplyStyleLookup();
OverflowMenu->RealignContent(); // realigns the children
TListBoxItem controls of the OverflowMenu TListBox
}
}
194
Add a Search Box

o
To add a Search Box to the ListBox component, right-click the TListBox

component and simply select Add Item > TSearchBox from the context
menu:
To add it to the Action Bar:
To create the event handler for the SearchButton, double-click it

and add the following code:
Delphi:
procedure TForm1.SearchButtonClick(Sender: TObject);
begin
SearchBox1.Visible := not SearchBox1.Visible; //change the visibility status
end;
C++:
void __fastcall TForm1::SearchButtonClick(TObject *Sender) {
SearchBox1->Visible = !(SearchBox1->Visible); //change the visibility
status
}

1. Select either:
Run > Run
Run > Run Without Debugging
2. To invoke the overflow menu, click the vertical ellipsis on the Action bar.
3. To view the search box, click the SearchButton.
195
Android (Samsung Tab 2.0)
Android (Samsung Tab 2.0)
Displaying the overflow menu
Displaying the search box
See Also
o
FMX.ListBox.TListBox

Android)
Mobile Tutorial: Using LiveBindings to Populate a ListBox in Mobile

Android)
196
Mobile Tutorial: Using LiveBindings to Populate a ListBox in Mobile Applications (iOS and Android)
Mobile Tutorial: Using LiveBindings

to Populate a ListBox in Mobile
This tutorial guides you through the steps of connecting data to a FireMonkey
ListBox control on your mobile devices, using LiveBindings.
Step 1: Creating the Project

In this project, you need a list box, a rectangle, and also a prototyping binding
source. To add these components, follow the steps below:
1. Select:
For Delphi: File > New > Multi-Device Application - Delphi
For C++: File > New > Multi-Device Application - C++Builder
Designer.
3. Select the list box component on the Form Designer, and in the Object
Inspector, locate the DefaultItemStyles.ItemStyle property. Set it to the
listboxitemrightdetail style.
4. Unselect the list box component by clicking in a blank area of the Form
Designer.
5. Select the TRectangle component in the Tool Palette, and drop it on the
Form Designer.
6. Select the rectangle component on the Form Designer, and in the Object
Inspector, set the Align property to Bottom.
7. Select the list box component and set its Align property to Client.
8. Now drop a TPrototypeBindSource from the Tool Palette onto your form.
197
At this point, your form should be similar to the following iOS screen:
198
You need to add sample data for colors and color names to the
TPrototypeBindSource component in order to support the purpose of this tutorial
and to link to the list box and the rectangle.
1. Right-click the TPrototypeBindSource component, and then click Add
Field on the context menu.
2. Select AlphaColors and ColorsNames from the Field Data list, and clear
the Shuffle Values check box.
This operation adds sample alphabetically sorted data (alpha color
values and names).
3. Validate your selection by clicking the OK button. Now the sample data is
ready to be used through LiveBindings.
199
Step 2: Creating the LiveBindings

Open the LiveBindings Designer. The diagram with no connections is similar to the
following image:
1. Bind ColorsName1 from PrototypeBindSource1 to Item.Text from ListBox1.

(Click ColorsName1 and drag the mouse to Item.Text.) Now the list box
displays all the color names in the prototyping binding source.
2. Bind ColorsName1 from PrototypeBindSource1 to ItemHeader.Text from
ListBox1. Now the list box also displays headers with all the color names in
the prototyping binding source.
3. In the LiveBindings Designer, click the binding that connects ColorsName1
to ItemHeader.Text.
4. In the Object Inspector, locate the FillHeaderCustomFormat property and
select the SubString(%s, 0, 1)binding expression from the drop-down list.
At this point, the list box groups all the color names into alphabetical categories:
200
5. Bind AlphaColor1 from PrototypeBindSource1 to Item.LookupData from

ListBox1. This ensures that the selection of the color name also points to
the correct alpha color value.
6. Bind AlphaColor1 from PrototypeBindSource1 to Item.Detail from ListBox1.
This ensures the alpha color value appears in the right side of the item in
the list box.
7. Click the ellipsis button [...] on the Rectangle1 diagram block in the
LiveBindings Designer, and in the dialog that opens, type Fill.Color. Select
the Fill.color check box, then click OK:
8. Bind Fill.Color from Rectangle1 to SelectedValue from ListBox1. This ensures

the rectangle's fill color changes according to your list box item selection.
Note: When attempting to bind Fill.Color to SelectedValue, a
confirmation message box opens. In this message box, choose Yes.
201
After you complete the steps above, the LiveBindings diagram will be similar to
the following image:
Your application is now ready to run on the mobile device.
202
The Results
To run the application, press F9 or choose Run > Run.
When you select a list box item, the rectangle's color changes accordingly:
iOS (iPad)
Android (LG-E612)
203
See Also
o
Using Custom Format and Parse Expressions in LiveBindings

Android)

and Android)
Mobile Tutorial: Using InterBase ToGo with dbExpress (iOS and Android)
204
Mobile Tutorial: Using Layout to Adjust Different Form Sizes or Orientations (iOS and Android)
Mobile Tutorial: Using Layout to

Adjust Different Form Sizes or
Orientations (iOS and Android)
This tutorial describes a general strategy for using the Master view for different
form factors (such as phone or tablet), without using different views for each
form factor.
Every FireMonkey Component Can Have an Owner, a

Parent, and Children
First, every FireMonkey component has the idea of Owner, Parent, and Children.
If you place a component on a form, the form becomes the owner and parent
of the component.
If you add components (for example, a Button, Label, and others) to another
component (for example, a ToolBar), the ToolBar is both parent and owner of the
Button, Label, and others. You can see this parent-child relationship graphically
represented in the tree view in the Structure View.
The Layout for a child is defined as a value relative to its parent. In the following
picture, Label1 is the child of Toolbar1, and the Layout of Label1 is relative to
Toolbar1.
Using Common Layout-Related Properties of a

FireMonkey Component
Using the Align Property
A control's Align property determines whether it is automatically repositioned
and/or resized along its parent's four sides or center, both initially and as the
parent is resized.
205
The default value for the Align property is None, which means that no automatic
calculations are performed: the control stays where it is placed:
Align = None
Typical values for the Align property are as follows (Dodgerblue indicates the
area for the child):
Top
Bottom
Left
Right
Center
Client
If you use an Align value of Top, Bottom, Left, or Right for one component, the
Align properties for other components use the remaining area.
The size and shape of the remaining area (Client) also changes based on the
orientation of the device, and based on the form factor (iPhone or iPad).
206
The following pictures show the layout for landscape (horizontal) and for portrait
(vertical) when you have two (2) components that use Top, and one (1)
component that uses Client.
Using the Margins Property

Margins ensure separation between controls automatically positioned by a
parent.
In the following picture, the right side of the component (Align = Client) uses the
Margins property to ensure space around the component.
Using the Padding Property

Padding sets aside space on the interior of the parent's content box. In the
Object Inspector, you can set values (in pixels) for the Padding:
o
Left
Right
Bottom
Top
207
In the following picture, the parent component (which contains two regions)
uses the Padding property to ensure space inside the parent component:
Using the Anchors Property

Anchors are needed when a control must maintain its position at a certain
distance from the edges of its parent, or must stretch while maintaining the
original distance between its edges and the edges of its parent. Anchored
controls 'stick' to the sides of containers and stretch, if so specified.
Anchors Property for the Edit Control

If you have an Edit control on top of a ToolBar, you may want to keep a fixed
distance between the right edge of the Edit Control and the edge of the form
(ToolBar). Anchors enable you to specify that a control is to remain fixed in
relation to the sides of its parent.
If you want the Edit control to maintain the same relative position in relation to
the ToolBar (its parent), you can set the Anchors property to akLeft, akTop,
akRight. When the ToolBar is resized, the Edit control is resized according to the
Anchors settings:
iOS
Android
208
Anchors Property for Button Control

If you have a Button control at the right end of the ToolBar, you may want to
keep the same distance between the right edge of the Button control and the
edge of the Form. However, you might not want to maintain the same distance
between the left edge of the Button control and the left edge of the Form. In this
case, you can set the Anchors property to akTop, akRight (de-select akLeft), so
that the Button control maintains the same distances with the ToolBar (parent) for
Top and Right.
iOS:
Android:
209
Using the TLayout Component

TLayout, a component that is not visible at run time, can be used to group its
child controls to be manipulated as a whole. For example, you can set the
visibility of a group of controls at one time by setting the Visible property of the
layout. TLayout does not automatically set any of the properties of its children.
To make selected controls children of TLayout, use the Structure View.
Highlight the controls you want to move. Then drag the group of controls over
the control that should be the parent, and drop the controls there. In the
Structure View, the group of controls are now children of the new parent:
1. Initial State
2. Highlight the Controls to Move
3. Drag onto Parent
You can use Align, Padding, Margins, Anchors, and other properties of TLayout to
define the layout for a specific area. You can use the TLayout component just
like the DIV tag in HTML.
See Also
o

Android)

and Android)
Tutorial: Using FireMonkey Layouts
FireMonkey Layouts Strategies
Arranging FireMonkey Controls
Gestures in FireMonkey
210
Mobile Tutorial: Taking and Sharing a

Picture, and Sharing Text (iOS and
Android)
Before starting this tutorial, you should read and perform the following tutorial:
o
Android)
This tutorial covers the following typical tasks for using pictures and sharing text
with your applications in mobile platforms.
211
On iOS Devices:
Taking a picture with the device camera
Sharing or printing a picture
Using a picture from the device Photo

Library
Sharing text
212
On Android Devices:
Taking a picture with the device camera Using a picture from the device Photo Library
Sharing or printing a picture
Sharing text
213
Topics
o
Taking and Sharing Pictures and Text Using Action Lists
Taking Pictures Using FireMonkey Interfaces
See Also
o
Mobile Tutorial: Using Notifications (iOS and Android)
FireMonkey Actions
FMX.Objects.TImage
FMX.MediaLibrary
FMX.PhotoEditorDemo Sample
FMX.CameraComponent Sample
http://appleinsider.com/articles/12/02/16/share_sheets
214
Taking and Sharing Pictures and Text

Using Action Lists
This tutorial describes how to handle pictures and text on your mobile devices
using FireMonkey Actions.
An action corresponds to one or more elements of the user interface, such as
menu commands, toolbar buttons, and controls.
Actions serve two purposes:
o
To represent properties common to the user interface elementssuch as

whether a control is enabled or whether a check box is selected.
To respond when a control firessuch as when the user clicks a button or

chooses a menu item.
In this tutorial, you learn how to assign actions to user interface elements (such as
a button) for each functionality that you want to support.
Building the User Interface for the Application

Place the following components on the Form Designer:
o
TToolBar component
On the toolbar, put three TButton components. Each button uses

different icons.
Set the StyleLookup property for the three buttons respectively to:
cameratoolbuttonbordered
searchtoolbuttonbordered
actiontoolbuttonbordered
TImage component
Set the Align property to Client.
TActionList component
215
The form should now look like the following screen, before you set the Style or
View in the Form Designer:
Note: For information about the selection of the Style and Views,
see Style Selector and Using FireMonkey Views.
Taking a Picture with a Mobile Device Camera

You can define an action to take a photo using the camera on your mobile
device. Perform the following steps:
1. On the Form Designer, select the button (to be used for taking a photo).
2. In the Object Inspector, select the drop-down list for the Action property.
216
3. Select New Standard Action | Media Library |

TTakePhotoFromCameraAction:
4. On the Events tab, expand the Action node, and then double-click the
OnDidFinishTaking event.
5. Add the following code to the OnDidFinishTaking event handler:

Delphi:
procedure TForm1.TakePhotoFromCameraAction1DidFinishTaking(Image: TBitmap);
begin
Image1.Bitmap.Assign(Image);
end;
C++:
void __fastcall TForm1::TakePhotoFromCameraAction1DidFinishTaking(TBitmap
*Image)
{
Image1->Bitmap->Assign(Image);
}
This code assigns a picture taken from the mobile device camera to the Bitmap
property of the TImage component.
217
Saving a Picture to the Device Photo Library

If you want your application to automatically save the pictures taken by a
device camera to the device Photo Library, set the
TCustomTakePhotoAction.NeedSaveToAlbum property to True.
Note: The default value of the NeedSaveToAlbum property is False.
To automatically save pictures to the Photo Library
1. In the Structure View, expand the ActionList1 node, and then select
TakePhotoFromCameraAction1.
2. In the Object Inspector, set the NeedSaveToAlbum property to True.
218
Your application saves the pictures to an album in the device Photo Library. The
album name depends on the device operating system in the following way:
OS version
Album Name
iOS
Camera Roll
Android
Camera
Note: To save an image instead of a photo to the Photo Library, you can use
IFMXPhotoLibrary.AddImageToSavedPhotosAlbum.
Using a Picture from the Mobile Device Photo Library

You can define an action to use a photo from the Photo Library with the
following steps:
1. On the Form Designer, choose the button that you want to use (for
picking up a photo).
2. In the Object Inspector, click the drop-down list for the Action property
and select New Standard Action | Media Library |
TTakePhotoFromLibraryAction.
3. In the Events tab, expand the Action node, and then double-click the
OnDidFinishTaking event.
4. Add the following code to the OnDidFinishTaking event handler:
Delphi:
procedure TForm1.TakePhotoFromLibraryAction1DidFinishTaking(Image: TBitmap);
begin
end;
C++:
void __fastcall TForm1::TakePhotoFromLibraryAction1DidFinishTaking(TBitmap
*Image)
{
}
The code above assigns a picture taken from the Photo Library to the Bitmap
property of the TImage component.
219
Enabling Image Editing

You can enable the Editable property of the actions
TTakePhotoFromCameraAction and TTakePhotoFromLibraryAction to allow
cropping the image after taking or loading it.
To enable the Editable property follow the steps:
1. On the Structure panel, go to the action:
1. ActionList1 | TakePhotoFromCameraAction1
2. ActionList1 | TakePhotoFromLibraryAction1
2. On the Object Inspector, set the Editable property to True.
After enabling the Editable property, you can crop the photos on iOS and
Android.
220
On iOS Devices:
Loading the Picture
Zooming the Picture
Cropping the Picture
On Android Devices:
Loading the Picture
Android Menu for the Action Cropping the Picture
221
Sharing or Printing a Picture

From your application, you can share a photo on social networking sites (such as
Facebook and Twitter), you can send the picture to a printer, use the picture as
an attachment to e-mail, assign it to Contacts, and so on.
This multi-share service is called Share Sheet Functionality, and you can
implement this functionality using the following steps:
1. On the Form Designer, select the button (for sharing a photo).
2. In the Object Inspector, click the drop-down list for the Action property,
TShowShareSheetAction.
OnBeforeExecute event.
222
4. Add the following code to the OnBeforeExecute event handler:

Delphi:
procedure TForm1.ShowShareSheetAction1BeforeExecute(Sender: TObject);
begin
ShowShareSheetAction1.Bitmap.Assign(Image1.Bitmap);
end;
C++:
void __fastcall TForm1::ShowShareSheetAction1BeforeExecute(TObject *Sender)
{
ShowShareSheetAction1->Bitmap->Assign(Image1->Bitmap);
}
The code above assigns a picture on the TImage component to "Share Sheet
Functionality".
After you select Facebook from the list of services, you can post the picture on
Facebook with your comment:
Note: In this subsection, screenshots of iOS devices are used as an

example.
For a sample application that uses share sheet functionality, see the
FMX.PhotoEditorDemo Sample.
223
Sharing Text
From your application, you can share text using the share sheet of the mobile
device. The applications that appear in the share sheet depend on the device:
o
On an iOS device, a list of suitable sharing options is shown depending on

the content that your app wants to share, but there is not a full appsharing mechanism.
On an Android device, the choices are dependent on sharing options

and installed apps.
From your application, you can share text on social networking sites (such as
Facebook and Twitter), you can send it by email, SMS (Short Message Service),
and other available methods.
You can implement this functionality with the multi-share service called Share
Sheet Functionality. The TShowShareSheetAction is the standard action for
sharing images and text. TShowShareSheetAction shows the available sharing
options depending on the type of content you are sharing. That is, the options
shown for Text are different than for a Bitmap.
This example shows a simple implementation of this functionality. We share the
text that the user has typed into a Memo.
1. Create a multi-device application. In our example, the form is named
Demonstration.
2. Place the following components on the Form Designer:
TToolBar component
On the toolbar, add a TButton component.
Set the StyleLookup property for the button as follows:
actiontoolbuttonbordered or actiontoolbutton for iOS
actiontoolbutton for Android
Note: The actiontoolbuttonbordered property includes the button with a border,

while actiontoolbutton shows the button without a border.
TMemo component
TActionList component
224
After you have added the components to the sample application:

1. On the Form Designer, select the button (for sharing the text).
2. In the Object Inspector, click the drop-down list for the Action property,
TShowShareSheetAction.
OnBeforeExecute event.
4. Add the following code to the OnBeforeExecute event handler:
Delphi:
procedure TDemonstration.ShowShareSheetAction1BeforeExecute(Sender: TObject);
begin
ShowShareSheetAction1.TextMessage:= Memo1.Lines.Text;
end;
C++:
void __fastcall TDemonstration::ShowShareSheetAction1BeforeExecute(TObject
*Sender)
{
ShowShareSheetAction1->TextMessage = Memo1->Lines->Text;
}
225
The code above uses the TextMessage property to assign the text to be shared,
as previously typed in a TMemo.
See Also
o
FireMonkey Actions
FMX.Objects.TImage
FMX.MediaLibrary
http://appleinsider.com/articles/12/02/16/share_sheets
Samples
o
FireMonkey Photo Editor sample
FireMonkey Camera Component sample
FireMonkey Camera Roll sample
FireMonkey Share Sheet sample
226
Taking Pictures Using FireMonkey

Interfaces
This tutorial explains how to take and handle pictures on your mobile devices
using the IFMXPhotoLibrary and IFMXCameraService interfaces.
Building the User Interface for Your Application

Drop the following components onto the Form Designer:
o
TToolBar component
On the toolbar, put two TSpeedButton components. You will use

these buttons to take pictures with the device camera and select
them from the device Photo Library.
In the Object Inspector, specify the following properties of these

buttons:
Set the StyleLookup property to cameratoolbuttonbordered,

and searchtoolbuttonbordered, respectively.
Set the Align property to Left, and Right, respectively.
TImage component
227
The form this sample application should now look like the following screen,
before you set the Style or View in the Form Designer:
Note: For more information about the selection of the Style and
Views, see Style Selector and Using FireMonkey Views.
Taking a Picture with a Device Camera

To take pictures with a mobile device camera, you can use the
IFMXCameraService interface. Perform the following steps:
1. Open the Code Editor and add the following lines to your code if they are
not present:
Delphi:
uses
FMX.MediaLibrary, FMX.Platform, System.Messaging;
C++:
#include <FMX.Platform.hpp>
#include <FMX.MediaLibrary.hpp>
#include <System.Messaging.hpp>
228
2. Add the following procedure header to the private section of the form
definition:
Delphi:
procedure DoDidFinish(Image: TBitmap);
procedure DoMessageListener(const Sender: TObject; const M: TMessage);
C++:
void __fastcall DoDidFinish(TBitmap *Image);
void __fastcall DoMessageListener(const TObject *Sender, TMessage const
*M);
3. In the implementation section, define DoDidFinish and DoMessageListener

as follows:
Delphi:
procedure TForm1.DoDidFinish(Image: TBitmap);
begin
end;
procedure TForm1.DoMessageListener(const Sender: TObject; const M:
TMessage);
begin
if M is TMessageDidFinishTakingImageFromLibrary then
Image1.Bitmap.Assign(TMessageDidFinishTakingImageFromLibrary(M).Value);
end;
C++:
void __fastcall TForm1::DoDidFinish(TBitmap *Image) {
}
void __fastcall TForm1::DoMessageListener(const TObject *Sender, TMessage
const *M) {
TMessageDidFinishTakingImageFromLibrary const *v =
dynamic_cast<TMessageDidFinishTakingImageFromLibrary const *>(M);
if (v) {
Image1->Bitmap->Assign(v->Value);
}
}
229
4. On the Form Designer, double-click the SpeedButton1 button, and then in

the Code Editor, implement the following onClick event handler:
Delphi:
procedure TForm1.SpeedButton1Click(Sender: TObject);
var
Service: IFMXCameraService;
Params: TParamsPhotoQuery;
begin
if TPlatformServices.Current.SupportsPlatformService(IFMXCameraService,
Service) then
begin
Params.Editable := True;
// Specifies whether to save a picture to device Photo Library
Params.NeedSaveToAlbum := True;
Params.RequiredResolution := TSize.Create(640, 640);
Params.OnDidFinishTaking := DoDidFinish;
Service.TakePhoto(SpeedButton1, Params);
end
else
ShowMessage('This device does not support the camera service');
end;
C++:
void __fastcall TForm1::SpeedButton1Click(TObject *Sender) {
_di_IFMXCameraService service;
TParamsPhotoQuery params;
if (TPlatformServices::Current->SupportsPlatformService
(__uuidof(IFMXCameraService)) && (service =
TPlatformServices::Current->GetPlatformService
(__uuidof(IFMXCameraService)))) {
params.Editable = true;
// Specifies whether to save a picture to device Photo
Library
params.NeedSaveToAlbum = true;
params.RequiredResolution = TSize(640, 640);
params.OnDidFinishTaking = DoDidFinish;
service->TakePhoto(SpeedButton1, params);
}
else {
ShowMessage("This device does not support the camera
service");
}
}
230
Running the Application

Run the application on your mobile device, either by pressing F9 or by choosing
Run > Run. To turn on the device camera, tap the camera icon on the toolbar of
your application:
iOS
Android
To use this picture:

o
On Android devices, click OK.
On iOS devices, click Use.
Saving a Picture to the Device Photo Library

If you want your application to automatically save the pictures taken by a
device camera to the device Photo Library, set the NeedSaveToAlbum field of
the second parameter of the TakePhoto method to True (see code snippets in
Step 4 of the above procedure).
231
Your application saves the pictures to an album in the device Photo Library. The
album name depends on the device operation system in the following way:
OS version
Album Name
iOS
Camera Roll
Android
Camera
Selecting a Picture from the Device Photo Library

FireMonkey defines the IFMXTakenImageService interface that allows you to
select a picture from the device Photo Library.
To let your application select a picture from the device Photo Library, perform
the following steps:
1. On the Form Designer, double-click the SpeedButton2 button (for picking
up a picture), and then in the Code Editor, implement the following
onClick event handler:
Delphi:
procedure TForm1.SpeedButton2Click(Sender: TObject);
var
ImageService: IFMXTakenImageService;
Params: TParamsPhotoQuery;
begin
if
TPlatformServices.Current.SupportsPlatformService(IFMXTakenImageService,
IInterface(ImageService)) then
begin
Params.RequiredResolution := TSize.Create(640, 640);
Params.OnDidFinishTaking := DoDidFinish;
ImageService.TakeImageFromLibrary(SpeedButton2, Params);
end;
end;
232
C++:
void __fastcall TForm1::SpeedButton2Click(TObject *Sender) {
_di_IFMXTakenImageService service;
TParamsPhotoQuery params;
if (TPlatformServices::Current->SupportsPlatformService
(__uuidof(IFMXTakenImageService)) && (service =
TPlatformServices::Current->GetPlatformService
(__uuidof(IFMXTakenImageService)))) {
params.RequiredResolution = TSize(640, 640);
params.OnDidFinishTaking = DoDidFinish;
service->TakeImageFromLibrary(SpeedButton2, params);
}
else {
ShowMessage("This device does not support the photo
library service");
}
}
2. In the Structure View, select Form1, in the Object Inspector, open the
Events tab, double-click an empty field next to OnCreate, and then
implement the following onFormCreate event handler:
Delphi:
begin
TMessageManager.DefaultManager.SubscribeToMessage(TMessageDidFinishTaking
ImageFromLibrary, DoMessageListener);
end;
C++:
void __fastcall TForm1::FormCreate(TObject *Sender) {
TMessageManager::DefaultManager>SubscribeToMessage(__classid(TMessageDidFinishTakingImageFromLibrary),
TMessageListenerMethod(&DoMessageListener));
}
233
3. Compile and run your application. To select a picture, tap the search
button, and then select the picture of interest from the device Photo
Library.
iOS
Android
4. Note: On iPad devices, the application displays thumbnail

pictures in a popup window next to the control element
specified in the first parameter of the TakeImageFromLibrary
method. In our sample project, SpeedButton2 refers to the
search button.
See Also
o
FMX.CameraComponent Sample
FMX.Objects.TImage
FMX.MediaLibrary
IFMXPhotoLibrary
IFMXCameraService
234
Mobile Tutorial: Using Location

Sensors (iOS and Android)
sessions:
o

and Android)

(iOS and Android)
Note: On Android devices, TLocationSensor requires specific Uses Permissions to

be set, specifically Access coarse location and Access fine location.
This tutorial describes the basic steps to locate your mobile device (using latitude
and longitude), and to use Reverse Geocoding to convert to a readable
address, such as in the following picture:
235
Design the User Interface

This demo application is designed with two major components: a TListBox (on the
left-hand side) and a TWebBrowser.
Note: Before proceeding with this scenario, in the Project Manager,
set the active target platform to iOS Device or Android. Otherwise,
you cannot add the TWebBrowser component.
Drop a TListBox and a TWebBrowser component on the form.

o
In the TListBox, set the Align property to Left to reserve the left side of the
UI. Then create the following subcomponents under the ListBox:
A TListBoxHeader component with the following sub-components:
A TLabel component with the text "Location Demo"
A TSwitch (Switch1) component to select on/off of

TLocationSensor
A TListBoxGroupHeader with the text "Your Location"
A TListBoxItem with the name "ListBoxItemLatitude" and "Latitude" as

text
A TListBoxItem with the name "ListBoxItemLongitude" and

"Longitude" as text
A TListBoxGroupHeader with the text "Current Address"
A TListBoxItem with the name "ListBoxItemAdminArea" and

"AdminArea" as text
236
A TListBoxItem with the name "ListBoxItemCountryCode" and

"CountryCode" as text
A TListBoxItem with the name "ListBoxItemCountryName" and

"CountryName" as text
A TListBoxItem with the name "ListBoxItemFeatureName" and

"FeatureName" as text
A TListBoxItem with the name "ListBoxItemLocality" and "Locality" as

text
A TListBoxItem with the name "ListBoxItemPostalCode" and

"PostalCode" as text
A TListBoxItem with the name "ListBoxItemSubAdminArea" and

"SubAdminArea" as text
A TListBoxItem with the name "ListBoxItemSubLocality" and

"SubLocality" as text
A TListBoxItem with the name "ListBoxItemSubThoroughfare" and

"SubThoroughfare" as text
A TListBoxItem with the name "ListBoxItemThoroughfare" and

"Thoroughfare" as text
A TWebBrowser component (WebBrowser1) to show the Web Page

(Google Maps). Set the Align property to Client.
After you create these components, select all TListBoxItem items and select
listboxitemleftdetail in the StyleLookup property. This allows TListBoxItem to show
both a label and detailed text.
The Location Sensor

The location sensor is wrapped by the TLocationSensor component.
TLocationSensor fires an OnLocationChanged event when the device detects
movement. You can adjust the sensitivity of TLocationSensor using the Distance
and Accuracy properties.
o
The Distance property specifies the minimum distance (in meters) by

which the device must move in order to make the location sensor
relocate the device and return new location information. For example, if
you set Distance to "10", TLocationSensor fires an OnLocationChanged
event when you move "10 meters".
The Accuracy property represents the level of precision (in meters) by

which the sensor locates the device geographically, relative to the
geographical point at which the device is actually located.
237
Tip: You should specify the lowest accuracy that works for your application; the
higher the accuracy, the more time and power that the sensor requires to
determine the location. The recommended values: Distance=0; Accuracy=0.
Read Location Information (Latitude, Longitude) from

the LocationSensor Component
The TLocationSensor component needs to be activated for use. You can turn
on/off TLocationSensor based on your input, such as a TSwitch component, or
other Application events.
1. Place a TLocationSensor component from the Tool Palette.
2. On the Form Designer, select the TSwitch component.
3. In the Object Inspector, in the Events tab double-click OnSwitch event.
4. Add the following code to the OnSwitch event handler:
Delphi:
procedure TForm1.Switch1Switch(Sender: TObject);
begin
LocationSensor1.Active := Switch1.IsChecked;
end;
C++:
void __fastcall TForm1::Switch1Switch(TObject *Sender)
{
LocationSensor1->Active = Switch1->IsChecked;
}
As discussed earlier, TLocationSensor fires an OnLocationChanged event when

you move the mobile device. You can show the current location (Latitude and
Longitude) using parameters with an event handler.
1. On the Form Designer, select the TLocationSensor.
2. In the Object Inspector, in the Events tab double-click OnLocationChange
event.
238
3. Add the following code to the OnLocationChange event handler:

Delphi:
procedure TForm1.LocationSensor1LocationChanged(Sender: TObject;
const OldLocation, NewLocation: TLocationCoord2D);
var
LDecSeparator: String;
begin
LDecSeparator := FormatSettings.DecimalSeparator;
FormatSettings.DecimalSeparator := '.';
// Show current location
ListBoxItemLatitude.ItemData.Detail := Format('%2.6f',
[NewLocation.Latitude]);
ListBoxItemLongitude.ItemData.Detail := Format('%2.6f',
[NewLocation.Longitude]);
end;
C++:
void __fastcall TForm1::LocationSensor1LocationChanged(TObject *Sender, const
TLocationCoord2D &OldLocation,
const TLocationCoord2D &NewLocation)
{
char LDecSeparator = FormatSettings.DecimalSeparator;
FormatSettings.DecimalSeparator = '.';
// Show current location
ListBoxItemLatitude->ItemData->Detail = ListBoxItemLatitude->ItemData>Detail.sprintf(L"%2.6f", NewLocation.Latitude);
ListBoxItemLongitude->ItemData->Detail = ListBoxItemLongitude>ItemData->Detail.sprintf(L"%2.6f", NewLocation.Longitude);
}
Show the Current Location Using Google Maps via a

TWebBrowser Component
As discussed in the Mobile Tutorial: Using the Web Browser Component (iOS and
Android), the TWebBrowser component wraps a Web browser for mobile
platforms.
You can call Google Maps from the TWebBrowser component with the following
URL parameters:
https://maps.google.com/maps?q=(Latitude-value),(Longitude-value)
239
So you can add this URL to your previously created event handler
OnLocationChanged as follows:
Delphi:
var
URLString: String;
begin
// code for previous step goes here
// Show Map using Google Maps
URLString := Format(
'https://maps.google.com/maps?q=%s,%s',
[Format('%2.6f', [NewLocation.Latitude]), Format('%2.6f',
[NewLocation.Longitude])]);
WebBrowser1.Navigate(URLString);
end;
C++:
{
// code for previous step goes here
// Show Map using Google Maps
String LLongitude = FloatToStr(NewLocation.Longitude, FormatSettings);
String URLString = "";
URLString =
URLString.sprintf(L"https://maps.google.com/maps?q=%2.6f,%2.6f",
NewLocation.Latitude, NewLocation.Longitude);
FormatSettings.DecimalSeparator = LDecSeparator;
WebBrowser1->Navigate(URLString);
}
Use Reverse Geocoding

TGeocoder is an object which wraps the Geocoding (or Reverse Geocoding)
service.
Geocoding is the process of transforming geographic data, such as the address
and zip code, into geographic coordinates. Reverse geocoding is the process of
transforming geographical coordinates into other geographical data, such as
the address.
In this case, we use TGeocoder to "Reverse Geocode" our location (in Latitude
and Longitude) to readable address information.
240
Here is the basic sequence of actions with TGeocoder:

1. Create an instance of TGeocoder.
2. Define an event OnGeocodeReverse so that you can receive the event
later.
3. Set data to execute "Reverse Geocoding".
4. TGeocoder accesses the service on the network to resolve the address
information.
5. TGeocoder fires an OnGeocodeReverse event.
6. Your iOS App receives the address information through the parameter on
the OnGeocodeReverse event and updates the user interface.
Note: As TGeocoder is not a component (this is just a class), you need to define
these steps through your code (you cannot drop a component, nor assign an
event handler through the Object Inspector).
First, define a new field "FGeocoder" in the private section of the form. You can
also define an "OnGeocodeReverseEvent procedure" as in the following code
snippets.
Delphi:
type
TForm1 = class(TForm)
// IDE defines visible (or non-visual) components here automatically
private
FGeocoder: TGeocoder;
procedure OnGeocodeReverseEvent(const Address: TCivicAddress);
public
{ Public declarations }
end;
C++:
Note: Place this code snippet in the header file (.h)
class TForm1 : public TForm
{
// IDE defines visible (or non-visual) components here automatically
private:
TGeocoder *FGeocoder;
void __fastcall OnGeocodeReverseEvent(TCivicAddress* const Address);
public:
__fastcall TForm1(TComponent* Owner);
};
241
Now you can create an instance of TGeocoder and set it up with data with the
following Delphi or C++ code.
TGeocoder.Current gives the type of class that actually implements the
Geocoding Service. The code in "TGeocoder.Current.Create" calls the
constructor (Create) for the specified type, and saves it to the FGeocoder field.
You also need to specify an event handler, which is fired when TGeocoder
completes Reverse Geocoding. Assign OnGeocodeReverseEvent (which you just
defined in the previous step) to FGeocoder.OnGeocodeReverse.
Finally, if you successfully created an instance of TGeocoder, and TGeocoder is
not running, call TGeocoder.GeocodeReverse with location information. After
TGeocoder receives data, the OnGeocodeReverseEvent event is fired.
Delphi:
begin
// code for previous steps goes here
try
// Setup an instance of TGeocoder
if not Assigned(FGeocoder) then
begin
if Assigned(TGeocoder.Current) then
FGeocoder := TGeocoder.Current.Create;
if Assigned(FGeocoder) then
FGeocoder.OnGeocodeReverse := OnGeocodeReverseEvent;
end;
// Translate location to address
if Assigned(FGeocoder) and not FGeocoder.Geocoding then
FGeocoder.GeocodeReverse(NewLocation);
except
ListBoxGroupHeader1.Text := 'Geocoder service error';
end;
end;
242
C++:
{
// code for previous steps goes here
// Setup an instance of TGeocoder
try {
if (FGeocoder == NULL) {
if (TGeocoder::Current != NULL) {
FGeocoder = (TGeocoder*)new TGeocoderClass(TGeocoder::Current);
}
if (FGeocoder != NULL) {
FGeocoder->OnGeocodeReverse = OnGeocodeReverseEvent;
}
}
// Translate location to address
if ((FGeocoder != NULL) && (!(FGeocoder->Geocoding()))) {
FGeocoder->GeocodeReverse(NewLocation);
}
}
catch (...) {
ListBoxGroupHeader1->Text = "Geocoder service error";
}
}
Show a Readable Address in the ListBox Component

As described earlier, after Reverse Geocoding is completed, an
OnGeocodeReverseEvent is fired.
Next, assign properties in the TCivicAddress address parameter to show readable
address information in the list box fields:
Delphi:
procedure TForm1.OnGeocodeReverseEvent(const
begin
ListBoxItemAdminArea.ItemData.Detail
ListBoxItemCountryCode.ItemData.Detail
ListBoxItemCountryName.ItemData.Detail
ListBoxItemFeatureName.ItemData.Detail
ListBoxItemLocality.ItemData.Detail
ListBoxItemPostalCode.ItemData.Detail
ListBoxItemSubAdminArea.ItemData.Detail
ListBoxItemSubLocality.ItemData.Detail
ListBoxItemSubThoroughfare.ItemData.Detail
ListBoxItemThoroughfare.ItemData.Detail
end;
Address: TCivicAddress);
:=
:=
:=
:=
:=
:=
:=
:=
:=
:=
Address.AdminArea;
Address.CountryCode;
Address.CountryName;
Address.FeatureName;
Address.Locality;
Address.PostalCode;
Address.SubAdminArea;
Address.SubLocality;
Address.SubThoroughfare;
Address.Thoroughfare;
243
C++:
void __fastcall TForm1::OnGeocodeReverseEvent(TCivicAddress*
{
if (Address != NULL){
ListBoxItemAdminArea->ItemData->Detail
>AdminArea;
ListBoxItemCountryCode->ItemData->Detail
>CountryCode;
ListBoxItemCountryName->ItemData->Detail
>CountryName;
ListBoxItemFeatureName->ItemData->Detail
>FeatureName;
ListBoxItemLocality->ItemData->Detail
>Locality;
ListBoxItemPostalCode->ItemData->Detail
>PostalCode;
ListBoxItemSubAdminArea->ItemData->Detail
>SubAdminArea;
ListBoxItemSubLocality->ItemData->Detail
>SubLocality;
ListBoxItemSubThoroughfare->ItemData->Detail
>SubThoroughfare;
ListBoxItemThoroughfare->ItemData->Detail
>Thoroughfare;
}
}
const Address)
= Address= Address= Address= Address= Address= Address= Address= Address= Address= Address-
Describing Why Your Application Needs the User

Location
Before you deploy your final application you should select Project > Options >
Version Info, with iOS Device as target, and update the values of
NSLocationAlwaysUsageDescription and NSLocationWhenInUseUsageDescription
with a message that explains why your application is asking for the user location.
Your users see this message when your application asks them to authorize iOS to
provide the location of the iOS device to your application.
244
See Also
o

(iOS and Android)
Mobile Tutorial: Using Remote Notifications (iOS and Android)
System.Sensors.TGeocoder
System.Sensors.Components.TLocationSensor
Mobile Code Snippets: Notifications
Samples
o
Location sample
VCL Sensors sample
245
Mobile Tutorial: Using Notifications

(iOS and Android)
This tutorial describes the basic steps to use notifications on your mobile device;
for further details, see using notifications.
Three Basic Notification or Alert Styles

When users set notifications for apps on their mobile devices, notifications can be
delivered from apps in the three basic styles shown here. The banner appears
briefly, but the alert dialog box requires dismissal by the user.
Notification Banner on Mobile Devices

iOS
Android
Alert Dialogs: iOS Badge Number and Android Notification Number

iOS Badge
Number
iPad
Android Notification Number
Android
246
Notification Center on Mobile Devices

The following images show the notification center on an iPad (Notification
Center) and Android (notification drawer), where the user can pull down the list
of all recent notifications.
iOS
Android
Access the Notification Service

RAD Studio provides the TNotificationCenter component that allows you to easily
access the Notification Service.
247
To access the notification service, do the following:

1. Create a new mobile application:
2. Select the TNotificationCenter component in the Tool Palette, and drop it

on the Form Designer.
3. Check that the following unit has been automatically added to the
project:
For Delphi applications, add the following unit to the uses clause if it
is not present:
uses
System.Notification;
For C++ applications, add the following include operator to the

project header file (.h file):
#include <System.Notification.hpp>
The System.Notification.TNotificationCenter.CreateNotification method allows

you to create an instance of the TNotification class object.
Add FMLocalNotificationPermission (iOS)

In order to use notifications on iOS 8+ devices, you need to ensure that the
FMLocalNotificationPermission Key/Value pair is enabled on the Version Info
page of Project Options.
1. Choose Project > Options > Version Info.
2. In the Target field, select Debug configuration - iOS device - 32-bit
platform.
3. Set the Value field for FMLocalNotificationPermission to true.
248
The FMLocalNotificationPermission setting enables local notifications on iOS 8+

devices:
Set the Icon Badge Number and Notification Number

from Code
TNotification.Number defines the Icon Badge Number (for iOS devices) and the
notification number (for Android devices).
To set the iOS icon badge number (for Delphi or C++) or the Android notification
number (only for Delphi apps), you need to implement the corresponding
method.
1. Drop a TButton to the form.
2. In the Object Inspector, change the Name property to SetNumber.
3. Create the OnClick event of the SetNumber button by double-clicking the
button.
249
4. Implement the event handler for the OnClick event of the SetNumber
button by adding the following code:
For Delphi:
procedure TForm1.SetNumberClick(Sender: TObject);

var
MyNotification: TNotification;
begin
// Create an instance of TNotification
MyNotification := NotificationCenter1.CreateNotification;
try
// --- your code goes here --// Set the icon or notification number
MyNotification.Number :=18;
// Set the alert message
MyNotification.AlertBody := 'Delphi for your mobile device is
here!';
// Note: You must send the notification to the notification center
for the Icon Badge Number to be displayed.
NotificationCenter1.PresentNotification(MyNotification);
finally
MyNotification.DisposeOf;
end;
end;
For C++:
void __fastcall TForm1::SetNumberClick(TObject *Sender)

{
if (NotificationCenter1->Supported()) {
TNotification *myNotification = NotificationCenter1>CreateNotification();
__try {
myNotification->Number = 18;
myNotification->AlertBody = "C++ for your mobile
device is here!";
NotificationCenter1>PresentNotification(myNotification);
}
__finally {
myNotification->DisposeOf();
}
}
}
250
After running your application (press F9) and clicking the SetNumber button, you
can see the following:
o
A badge on the application icon (on the iOS Home screen):
A number next to the notification message in the notification center (on

Android):
Android
Schedule Notification
You can also schedule Notification Messages using the ScheduleNotification
method that the TNotificationCenter class inherits from
TCustomNotificationCenter.
To show a Notification Message, you need to create an instance of the
TNotification class, and then define the Name, AlertBody, and FireDate fields.
1. Drop a new TButton to the form.
2. In the Object Inspector, change the Name property to
ScheduleNotification.
3. Create the OnClick event of the ScheduleNotification button by doubleclicking the button.
251
4. Implement the event handler for the OnClick event of the

ScheduleNotification button by adding the following code:
For Delphi:
procedure TForm1.ScheduleNotificationClick(Sender: TObject);

var
begin
try
MyNotification.Name := 'MyNotification';
MyNotification.AlertBody := 'Delphi for your mobile device is here!';
// Fired in 10 seconds
MyNotification.FireDate := Now + EncodeTime(0, 0, 10, 0);
// Send notification to the notification center
NotificationCenter1.ScheduleNotification(MyNotification);
finally
end;
end;
For C++:
void __fastcall TForm1::ScheduleNotificationClick(TObject *Sender)

{
__try {
myNotification->Name = "MyNotification";
device is here!";
// Fire in 10 seconds
myNotification->FireDate = Now() + EncodeTime(0,
0, 10, 0);
NotificationCenter1>ScheduleNotification(myNotification);
}
__finally {
}
}
}
252
After running your application (press F9) and clicking the ScheduleNotification
button, you can see the Notification Message (AlertBody) at the top of your
device Home Screen. For iOS devices, this message is similar to the following
screen:
Repeat a Notification Message

You can also repeat a Notification Message using the RepeatInterval property of
the TNotification object.
To repeat a Notification Message, you need to create an instance of the
TNotification class, and then define the Name, AlertBody, and FireDate fields.
Also you need to use the ScheduleNotification method and set the
RepeatInterval property. In the following code, the repeated interval is set to a
minute.
RepeatedNotification.
3. Create the OnClick event of the RepeatedNotification button by doubleclicking the button.
253

RepeatedNotification button by adding the following code:
For Delphi:
procedure TForm1.RepeatedNotificationClick(Sender: TObject);

var
begin
try
MyNotification.Title := 'MyNotification';
MyNotification.AlertBody := 'Repeating notification each minute!';
//Fired in 10 seconds
//Repeated each minute
MyNotification.RepeatInterval := TRepeatInterval.Minute;
finally
MyNotification.Free;
end;
end;
For C++:
void __fastcall TForm1::RepeatedNotificationClick(TObject *Sender) {

TNotification *myNotification =
NotificationCenter1->CreateNotification();
__try {
myNotification->AlertBody = "Repeating notification each
minute!";
// Fire in 10 seconds
myNotification->FireDate = Now() + EncodeTime(0, 0, 10, 0);
// Repeated each minute
myNotification->RepeatInterval = TRepeatInterval::Minute;
NotificationCenter1->ScheduleNotification(myNotification);
}
__finally {
myNotification->Free();
}
}
}
254
After running your application (press F9) and clicking the RepeatedNotification
button, you can see the Notification Message (AlertBody) at the top of your
device Home Screen. For iOS devices, this message is similar to the following
screen:
Update or Cancel a Scheduled or Repeated

Notification Message
Each Scheduled Notification Message is identified through the Name property of
the TNotification object.
Note: For the iOS platform, CancelNotification and ScheduleNotification can
cancel or update those notifications that have not been presented yet.
To update a scheduled notification, simply call the ScheduleNotification method
again with an instance of TNotification that has the same name (Name
property).
To cancel a scheduled notification, you can simply call the CancelNotification
method with the identifier you used.
CancelNotification.
3. Create the OnClick event of the CancelNotification button by doubleclicking the button.
255

CancelNotification button by adding the following code:
For Delphi:
procedure TForm1.CancelNotificationClick(Sender: TObject);

begin
NotificationCenter1.CancelNotification('MyNotification');
end;
For C++:
void __fastcall TForm1::CancelNotificationClick(TObject *Sender)

{
NotificationCenter1->CancelNotification("MyNotification");
}
Present the Notification Message Immediately

You can also show the notification message immediately through the
PresentNotification function.
To show a notification message, you need to create an instance of the
TNotification class, and then define the Name and AlertBody fields.
PresentNotification.
3. Create the OnClick event of the PresentNotification button by doubleclicking the button.
256

PresentNotification button by adding the following code:
For Delphi:
procedure TForm1.PresentNotificationClick(Sender: TObject);

var
begin
try
// Set Icon Badge Number (for iOS) or message number (for Android) as
well
MyNotification.Number := 18;
MyNotification.EnableSound := False;
// Send message to the notification center
NotificationCenter1.PresentNotification(MyNotification);
finally
end;
end;
For C++:
void __fastcall TForm1::PresentNotificationClick(TObject *Sender)

{
__try {
device is here!";
// Set Icon Badge Number (for iOS) or message number
(for Android) as well
myNotification->EnableSound = False;
NotificationCenter1>PresentNotification(myNotification);
}
__finally {
}
}
}
257
Customizing the Notification Sound

You can use a customized sound for the notification message immediately
through the SoundName property of the TNotification object.
You need to create an instance of the TNotification class, define the
EnableSound and the SoundName properties. You also need to indicate the full
path to the file sound and the file extension.
2. In the Object Inspector, change the Name property to SoundNotification.
3. Create the OnClick event of the SoundNotification button by doubleclicking the button.
258

SoundNotification button by adding the following code:
For Delphi:
procedure TForm1.SoundNotificationClick(Sender: TObject);

var
begin
try
MyNotification.EnableSound := True;
MyNotification.SoundName := GetSoundName;
// Send message to the notification center
finally
MyNotification.Free;
end;
end;
For C++:
In the .cpp file, add the following code:
void __fastcall TForm1::SoundNotificationClick(TObject *Sender)

{
__try {
myNotification->AlertBody = "C++ for your mobile device is
here!";
myNotification->EnableSound = true;
myNotification->SoundName = GetSoundName();
myNotification->FireDate = Now() + EncodeTime(0, 0, 10, 0);
NotificationCenter1->ScheduleNotification(myNotification);
}
__finally {
myNotification->Free();
}
}
259
5. Declare the GetSoundName function.
For Delphi:
Set the GetSoundName declaration in the private section of

the unit.
Add the System.IOUtils to the project uses clauses.
uses
System.IOUtils;
private
function GetSoundName: string;
For C++:
In the header file (.h file), add the following declaration:
Set the GetSoundName declaration in the private section of

the unit.
Include the System.IOUtils.hpp to the project uses clauses.
#include <System.IOUtils.hpp>
private:
__fastcall UnicodeString GetSoundName ();
260
6. Implement the GetSoundName function.

Note: Depending on the target operating system, the sound data should be a
different file extension.
For Delphi:
{$R *.fmx}
function TForm1.GetSoundName: string;
begin
{$IFDEF IOS}
Result := 'myiOSSound.caf';
{$ENDIF}
{$IFDEF ANDROID}
Result := TPath.Combine(TPath.GetSharedDocumentsPath,
'myAndroidSound.mp3');
{$ENDIF}
end;
For C++:
In the .cpp file, add the following code:
UnicodeString __fastcall TForm1::GetSoundName ()

{
UnicodeString result;
#if defined(_PLAT_IOS)
result = "myiOSSound.caf";
#endif
#if defined(__ANDROID__)
result =
System::Ioutils::TPath::Combine(System::Ioutils::TPath::GetSharedDocument
sPath(), "myAndroidSound.mp3");
#endif
return result;
//
}
7. Add the sound files to your project:
Find the myAndroidSound.mp3 and myiOSSound.caf files in the

Windows Explorer, and drag them to the Project Manager. Drop
them on the name of your project.
Note: The sound files myAndroidSound.mp3 and myiOSSound.caf are not

included in the RAD Studio installation. You can use any MP3 and CAF files that
you have, but remember to change the name in the code snippet above to the
name of your files. See this link for more information on how to convert MP3 files
to CAF format: How to convert MP3 to CAF
In the Confirm dialog, click Yes to add the sound files to your
project.
261
8. Open the Deployment Manager to ensure that the sound files are
deployed with your application. You can see the corresponding entries in
the remote path column:
For iOS: StartUp\Documents (see deploying files in iOS applications).
For Android: assets\internal (see deploying files in Android

applications).
9. Change the remote path of the added files in the Deployment Manager:
For iOS: .\
For Android: assets\
Notification Banner or Notification Alert

By default, your application shows the notification banner:
o
Notification Banner on iPad
Notification Banner on Android devices
Android
o
Notification Alert (only for iOS devices)
262
To use a notification alert instead of a notification banner (only for iOS devices),
the end user needs to change the Alert style to Alerts through the configuration
page of Notification Center, available in the device Settings:
Add Action to the Notification Alert (iOS Only)

You can also customize an alert by adding an Action button that opens the
application.
To customize an Alert Action, you need to set the AlertAction field to the Action
button name, and then set the HasAction field to True, as follows.
2. In the Object Inspector, change the Name property to ActionNotification.
3. Create the OnClick event of the ActionNotification button by doubleclicking the button.
263

ActionNotification button by adding the following code:
For Delphi:
procedure TForm1.ActionNotificationClick(Sender: TObject);

var
begin
try
MyNotification.AlertBody := 'Delphi for iOS is here! ';
MyNotification.Number := 2;
MyNotification.AlertAction := 'Launch';
MyNotification.HasAction := True;
finally
end;
end;
For C++:
void __fastcall TForm1::ActionNotificationClick(TObject *Sender)

{
__try {
myNotification->AlertBody = "C++ for iOS is here!";
myNotification->AlertAction = "Launch";
myNotification->HasAction = True;
myNotification->FireDate = Now() +
EncodeTime(0,0,20,0);
NotificationCenter1>ScheduleNotification(myNotification);
}
__finally {
}
}
}
Note: Only iOS devices support the notification alert feature.
264
The notification alert opens at the time that was specified through the FireDate
field.
Add Action to Notifications

The TNotificationCenter class provides the onReceiveLocalNotification event
handler that allows you to write a response when the user clicks the notification
message in the notification center. To write the response, double-click the
TNotificationCenter component on the Form Designer, and then implement the
OnReceiveLocalNotification event handler.
265
The following code snippet implements a response to show a message box that
says "The <Notification name>" notification clicked."
o
For Delphi:
procedure TForm1.NotificationCenter1ReceiveLocalNotification(Sender: TObject;

ANotification: TNotification);
begin
ShowMessage('The ' + ANotification.Name + ' notification clicked.' );
end;
For C++:
void __fastcall TForm1::NotificationCenter1ReceiveLocalNotification(TObject

*Sender, TNotification *ANotification)
{
ShowMessage("The " + ANotification->Name + " notification clicked.");
}

To run the application, either choose Run > Run or press F9. Click the different
buttons to schedule or present notifications in your device.
266
See Also
o
Using Notifications
Mobile Tutorial: Taking and Sharing a Picture, and Sharing Text (iOS and
Android)
Mobile Code Snippets: Notifications
Creating events Index
Using the Mac OS X Notification Center
How to convert MP3 to CAF
Samples
o
FireMonkey Send Cancel Notification sample
FireMonkey Android Notification Service sample
FireMonkey Set Reset Badge Number sample
OSX Dock Badges (Delphi)
FireMonkey Notification Mac (Delphi)
FireMonkey Notification Mac (C++)
267
Mobile Tutorial: Using Remote

Notifications (iOS and Android)
This tutorial gives the basic steps to configure and to use Remote Notifications
(push notifications) on your iOS or Android mobile device.
Note: Kindle Fire devices do not support push notifications.
Remote Push Notification

Remote Notifications are notifications sent to a mobile device using a datachannel from a service provider in real-time.
Both iOS and Android offer built-in support for remote notifications, and RAD
Studio offers a REST BaaS framework that supports the following protocols, cloud
providers and backend service:
o
Protocols:
iOS: Apple Push Notification APN
Android: Google Cloud Messaging GCM
Cloud service providers:
Parse
Kinvey
Backend service:
EMS
In order to receive push notifications, you need to set up the messaging service
(APS or GCM), the device, the cloud service provider or EMS, and your RAD
Studio application, as described in the three pages of this mobile tutorial.
Notes:
o
The term Remote Notifications covers Apple Push Notification as well as

Google Cloud Messaging.
iOS and Android also have local notifications which are sent from an app
or from the OS to get the users attention. For more information, see
Mobile Tutorial: Using Notifications (iOS and Android).
The term Service Provider covers in this tutorial the Cloud service providers
(Kinvey and Parse) and the backend service provider EMS.
268
REST BAAS framework

Our REST BAAS framework offers you a variety of actions:
o
Create, retrieve, update and delete objects
Sign up, login, retrieve, update and delete users
Upload, download and delete files or streams
Query objects and users
Send push notifications
Register for and receive push notifications on a device
Topics in this Mobile Tutorial

We recommend that you perform these sequentially as steps in a procedure.
1. Setting Up the Messaging Service
2. Setting up the Service Provider. Choose one of the following options,
depending on the service provider:
Using the Cloud Service to Send Push Notifications
Using EMS to Send Push Notifications
3. Multi-Device Application to Receive Push Notifications
See Also
o
BaaS Overview
Getting Started with Kinvey and Parse
EMS Push Notifications
Enterprise Mobility Services (EMS)
Managing BaaS Users
Using BaaS for Backend Storage
Mobile Tutorial: Using BaaS for Backend Storage (iOS and Android)
Code Samples
o
BaaS ToDo Sample
269
Multi-Device Application to Receive Push Notifications
Multi-Device Application to Receive

Push Notifications
You create a basic application to receive push notification with elements that
are generic to Android and iOS, and you add the code that makes the
characteristics for the specific platforms.
Note: Because our implementation is based on the REST BAAS framework, RAD
Studio allows you to use in your iOS or Android apps one of the following service
providers:
o
Kinvey
Parse
EMS
Before you create your application to receive push notifications, ensure to

complete these two required steps:
o
Setting Up the Messaging Service
Choose the provider:
Using the Cloud Service to Send Push Notifications
Using EMS to Send Push Notifications
Design and Set Up the User Interface

1. To create an Multi-Device Application, select either of the following:
File > New > Multi-device Application - Delphi > Blank Application
File > New > Multi-device Application - C++Builder > Blank Application
2. Drop a TCheckBox component on the form.
In the Object Inspector, set the following properties of the CheckBox:
1. Set the Align to Top.
2. Set the IsChecked property to False.
3. Set the Text to Active.
3. Add a TMemo component to the form and set the Align property to
Client.
4. Drop a TPushEvents object.
5. Set the AutoActivate to False.
270
6. In LiveBindings Designer add a link from Active in PushEvents to IsChecked

in CheckBox. The Active property of PushEvents is set to True when the
CheckBox component is checked.
7. Depending on the service provider you want to use, add:
For Parse: a TParseProvider.
For Kinvey: a TKinveyProvider.
For EMS: a TEMSProvider.
271
1. Using TKinveyProvider (iOS or Android)
In the Object Inspector, set the following properties of the

KinveyProvider:
Expand the Android Push node and copy to GCMAppID the

Project Number from Registering with Google.
Set the AppKey, AppSecret and MasterSecret to API Keys

values from setting up your project in Kinvey.
Set UserName and Password to the values defined at

Adding an User in Kinvey.
272
2. Using TParseProvider (iOS or Android)

ParseProvider:
Set the ApplicationID, MasterKey and RestApiKey to API Keys

from Creating a Project at Parse.
Note: You do not need to add the GCM AppID when developing Android apps
and using Parse.
273
3. Using TEMSProvider (iOS or Android)

EMSProvider:
Expand the Android Push node and copy to GCMAppID the

Project Number from Registering with Google.
Set the ApplicationId, AppSecret and MasterSecret to API

Keys values from setting up your EMS Server.
274
Creating the Event Handlers

1. On the form, select PushEvents1 and go to the Object Inspector:
Check whether the Provider property is set to KinveyProvider1, to

ParseProvider1 or to EMSProvider1 , depending on which provider
you used.
Go to Events tab and create an event handler for each event by

double-clicking the Value field.
2. Switch to Code tab by pressing F12.
275
3. Define the event handlers as follows:

Delphi:
implementation
{$R *.fmx}
procedure TForm1.PushEvents1DeviceRegistered(Sender: TObject);
begin
Memo1.Lines.Add('Device Registered');
Memo1.Lines.Add('');
end;
procedure TForm1.PushEvents1DeviceTokenReceived(Sender: TObject);
begin
Memo1.Lines.Add('Device Token Received');
end;
procedure TForm1.PushEvents1DeviceTokenRequestFailed(Sender: TObject;
const AErrorMessage: string);
begin
Memo1.Lines.Add('Device Token Request Failed');
Memo1.Lines.Add(AErrorMessage);
end;
procedure TForm1.PushEvents1PushReceived(Sender: TObject;
const AData: TPushData);
begin
Memo1.Lines.Add('Device push received');
Memo1.Lines.Add(AData.Message);
end;
end.
276
C++:
//------------------------------------------------------------------------void __fastcall TForm1::PushEvents1DeviceRegistered(TObject *Sender)
{
Memo1->Lines->Add("Device Registered");
Memo1->Lines->Add("");
}
//------------------------------------------------------------------------void __fastcall TForm1::PushEvents1DeviceTokenReceived(TObject *Sender)
{
Memo1->Lines->Add("Device Token Received");
}
//------------------------------------------------------------------------void __fastcall TForm1::PushEvents1DeviceTokenRequestFailed(TObject
*Sender, const UnicodeString AErrorMessage)
{
Memo1->Lines->Add("Device Token Request Failed");
Memo1->Lines->Add(AErrorMessage);
}
//------------------------------------------------------------------------void __fastcall TForm1::PushEvents1PushReceived(TObject *Sender,
TPushData * const AData)
{
Memo1->Lines->Add("Push Received");
Memo1->Lines->Add(AData->Message);
}
//-------------------------------------------------------------------------
277
Android Settings
Note: To verify whether your Android device supports GCM, see GCM Overview
Project Settings
To enable your application to receive remote notifications:
1. Right-click your project in the Project Manager.
2. Choose Project > Options > Entitlement List.
3. Set Receive Push Notification value to True.
Note: If you want to enable receiving a notification even if the application is not
running while the remote notification comes in, you will need to register a Service
Class. This Java service class will create an entry in the Notification Center of the
Android Device. If you do not need or want items in the Notification Center, you
can skip this step.
You need to include an additional entry in the AndroidManifest.xml for the
project, by customizing your AndroidManifest.template.xml. In the
AndroidManifest.template.xml file of your project search for the following tag:
<%receivers%>
Add the following code below it:

<service android:name="com.embarcadero.gcm.notifications.GCMIntentService" />
278
iOS Settings
Project Settings
1. Right-click your project in the Project Manager.
2. Choose Project > Options > Version Info, and set the CFBundleIdentifier
key. This should be the same as the identifier of your App ID. It is the
Bundle ID from Creating iOS App ID on Apple Developer Program section.
Running Your Application on a Mobile Device

Now your application is ready to run on either a simulator or your connected
mobile device.
To run your application
1. In Project Manager, select your target platform.
2. Choose either of the following commands:
Run > Run
3. Click the Active checkbox.
279
4. Go to Parse, Kinvey or Sending EMS Push Messages and send a new push:
Note: You can use your own EMS application to send EMS Push Notifications
messages.
Parse
Kinvey
280
EMS
281
5. Switch to your mobile device:

iOS
Android
iOS EMS
282
6. Send your app to background and send another push from Parse or
Kinvey. Now go to Notifications:
iOS
Android
See Also
o
Enterprise Mobility Services (EMS)
EMS Push Notifications
Entitlement List
Code Samples
o
BaaS ToDo Sample
283
Mobile Tutorial: Using the Phone Dialer on Mobile Devices (iOS and Android)
Mobile Tutorial: Using the Phone

Dialer on Mobile Devices (iOS and
Android)
This tutorial describes the basic steps for using the phone dialer services on your
mobile device.
About the Phone Dialer Services on Mobile Devices

On mobile platforms, FireMonkey provides the IFMXPhoneDialerService interface
that defines the structure of the phone dialer service classes, such as
TPhoneDialerService.
The phone dialer services allow you to perform the following operations:
o
Get the carrier-related information.
Make a call.
Detect the call state changes.
Accessing the Phone Dialer Services

To create an application that uses the phone dialer services, perform the
following basic steps:
1. Select:
284
2. Open the Code Editor and do the following:

o
Add the following lines to your code if they are not present:
Delphi:
uses
FMX.Platform, FMX.PhoneDialer;
C++:
#include <FMX.Platform.hpp>
#include <FMX.PhoneDialer.hpp>
Only for Delphi apps: Add the following line to the public section of the
form definition:
constructor Create(AOwner: TComponent); override;
Add the following properties to the private section of the form definition:
Delphi:
private: // User declarations
PhoneDialerService: IFMXPhoneDialerService;
C++:
private: //User declarations
_di_IFMXPhoneDialerService phoneDialerService;
bool serviceSupported;
Only for Delphi apps: in the implementation section, override the form
constructor as follows:
constructor TForm1.Create(AOwner: TComponent);

begin
inherited Create(AOwner);
TPlatformServices.Current.SupportsPlatformService(IFMXPhoneDialerService,
IInterface(PhoneDialerService));
end;
285
Only for C++Builder apps: in the Structure View, click the form, and in the
Object Inspector, open the Events tab, and then double-click onCreate.
Implement the following onCreate event handler for the application form:

{
serviceSupported = (TPlatformServices::Current>SupportsPlatformService(__uuidof(IFMXPhoneDialerService)) &&
(phoneDialerService = TPlatformServices::Current>GetPlatformService(__uuidof(IFMXPhoneDialerService))));
}
Now your application can access the phone dialer services.

This tutorial uses the TLabel, TButton, and TEdit components as the user interface
elements.
To set up the UI elements, perform the following steps:
1. Drop two TLabel components on the Form Designer, and then set their
Name properties to lblCarrierName and lblISOCountryCode, respectively.
2. Set the Text property for the labels to Carrier Name and ISO Country
Code, respectively.
3. Drop a TButton component on the Form Designer, and in the Object
Inspector, set the following properties of this button:
Name to btnGetCarrierInfo
Text to Get Carrier Info
286
Getting the Carrier Properties

To get information on the carrier, make the following changes:
1. On the Form Designer, select the Get Carrier Info button.
2. In the Object Inspector, double-click the onClick event, and implement
the onClick event handler as follows:
Delphi:
procedure TForm1.btnGetCarrierInfoClick(Sender: TObject);
begin
{ test whether the PhoneDialer services are supported on your device }
if Assigned(PhoneDialerService) then
begin
{ if yes, then update the labels with the retrieved information }
lblCarrierName.Text := 'Carrier Name: ' +
PhoneDialerService.GetCarrier.GetCarrierName;
lblISOCountryCode.Text := 'ISO Country Code: ' +
PhoneDialerService.GetCarrier.GetIsoCountryCode;
end;
end;
C++:
void __fastcall TForm1::btnGetCarrierInfoClick(TObject *Sender)
{
if (serviceSupported) {
lblCarrierName->Text = "Carrier Name: " + phoneDialerService>GetCarrier()->GetCarrierName();
lblISOCountryCode->Text = "ISO Country Code: " +
phoneDialerService->GetCarrier()->GetIsoCountryCode();
}
else ShowMessage("This device does not support the Phone Dialer
services.");
}
287

Important: Before running your Delphi application on an Android
device, verify that the following permissions are set in Project >
Options > Uses Permissions for the All configurations - Android
platform target:
o
Call phone
Read phone state
For more information, see Uses Permissions.

To run the application, choose Run > Run or press F9.
After you click the Get Carrier Info button, the application displays the basic
information about the carrier, similar to the following screens:
iOS
Android
288
Making a Call
FireMonkey provides the IFMXPhoneDialerService.Call method that makes a
phone call to a specified phone number.
For your application to make calls, add the following elements to the Form
Designer:
1. Add a TLabel component, and then set its Text property to Telephone
Number.
2. Add a TEdit component, and in the Object Inspector, set the following
properties:
Name to edtTelephoneNumber.
KillFocusByReturn to True.
KeyboardType to PhonePad.
ReturnKeyType to Go.
289
3. Add a TButton component, and in the Object Inspector, do the following:

o
Set the Name property to btnMakeCall.
Set the Text property to Make Call.
On the Events tab, double-click onClick, and then implement the onClick
event handler as follows:
Delphi:
procedure TForm1.btnMakeCallClick(Sender: TObject);
begin
{ test whether the PhoneDialer services are supported on your device }
begin
{ if the Telephone Number is entered in the edit box then make the call,
else
display an error message }
if edtTelephoneNumber.Text <> '' then
PhoneDialerService.Call(edtTelephoneNumber.Text)
else
begin
ShowMessage('Please type-in a telephone number.');
edtTelephoneNumber.SetFocus;
end;
end;
end;
C++:
void __fastcall TForm1::btnMakeCallClick(TObject *Sender)
{
if (edtTelephoneNumber->Text != "" )
{
phoneDialerService->Call(edtTelephoneNumber->Text);
}
else {
ShowMessage("Please type-in a telephone number.");
edtTelephoneNumber->SetFocus();
}
}
else ShowMessage("This device does not support the Phone Dialer
services.");
}
290
To make a call:
1. Run the application.
2. In the TEdit field under Telephone Number, type the phone number.
3. Click the Make Call button.
iOS
Android
291
Detecting the Call State Changes

The IFMXPhoneDialerService interface provides the OnCallStateChanged event
that allows you to handle the call state changes. The TCallState enumeration
describes possible phone call states.
The following table describes the items in the TCallState enumeration (the
supported states for each platform are marked with "+").
Item
Description
iOS Android
None
No call state.
Connected
The phone caller is connected to the called party. +
Incoming
An incoming phone call.
Dialing
The phone is in a dialing state.
Disconnected Call is disconnected.
Implementing the OnCallStateChanged Event Handler

To implement the OnCallStateChanged event handler, perform the following
steps:
1. Add the following procedure header to the private section of the form
definition:
Delphi:
procedure MyOnCallStateChanged(const ACallID: String; const ACallState:
TCallState);
C++:
void __fastcall MyOnCallStateChanged(const UnicodeString aCallID, const
TCallState aCallState);
292
2. Rewrite the form constructor (Delphi applications) or the onFormCreate

event handler (C++ applications) that you have defined in the
#Accessing the Phone Dialer Services section as follows:
Delphi:
constructor TForm1.Create(AOwner: TComponent);
begin
inherited Create(AOwner);
TPlatformServices.Current.SupportsPlatformService(IFMXPhoneDialerService,
IInterface(PhoneDialerService));
PhoneDialerService.OnCallStateChanged := MyOnCallStateChanged;
end;
C++:
{
serviceSupported = (TPlatformServices::Current>SupportsPlatformService(__uuidof(IFMXPhoneDialerService)) &&
(phoneDialerService = TPlatformServices::Current>GetPlatformService(__uuidof(IFMXPhoneDialerService))));
phoneDialerService->OnCallStateChanged = MyOnCallStateChanged;
}
}
3. Add a TLabel component to the Form Designer, and in the Object

Inspector, set its Name property to lblCallState.
293
4. In the Code Editor, add the following event handler code:

Delphi:
procedure TForm1.MyOnCallStateChanged(const ACallID: String; const
ACallState: TCallState);
var outText: String;
Begin
case ACallState of
TCallState.None:
outText := 'No calls';
TCallState.Connected:
outText := 'Connected';
TCallState.Incoming:
outText := 'Incoming call';
TCallState.Dialing:
outText := 'Dialing';
TCallState.Disconnected: outText := 'Disconnected';
end;
lblCallState.Text := outText;
End;
C++:
void __fastcall TForm1::MyOnCallStateChanged(const UnicodeString aCallID,
const TCallState aCallState) {
switch (aCallState) {
case TCallState::None:
lblCallState->Text = "No calls";
break;
case TCallState::Connected:
lblCallState->Text = "Connected";
break;
case TCallState::Incoming:
lblCallState->Text = "Incoming call";
break;
case TCallState::Dialing:
lblCallState->Text = "Dialing";
break;
case TCallState::Disconnected:
lblCallState->Text = "Disconnected";
break;
}
}
294
After you implement this event handler, the application shows the phone call
state.
For example, the following iOS screen indicates that the phone is in a dialing
state:
Note: In this sample project, the TLabel component is next to the

TEdit box and the Make Call button, under Telephone Number.
295
See Also
o
Mobile Tutorial: Taking and Sharing a Picture, and Sharing Text (iOS and
Android)
Mobile Code Snippets: Phone Dialer
FMX.PhoneDialer.IFMXPhoneDialerService
Samples
o
FireMonkey Phone Dialer sample
296
Mobile Tutorial: Using BaaS for

Backend Storage (iOS and Android)
This tutorial gives the basic steps to use backend storage using Kinvey and Parse
as BaaS providers.
This tutorial creates a Shopping List where the items added are stored in the
cloud by the BaaS provider, so these items can be shared and updated among
different devices if needed.
iOS
iPod
Android
Nexus 7
With backend storage you can store files and data in the cloud. This information
can later be retrieved, updated, and deleted.
297
In this tutorial you are going to:

o
Create new items and store them in the cloud.
Retrieve items from the cloud.
Delete items from the cloud.
Getting Your App Ready in Kinvey and Parse

Before you start doing this tutorial, ensure you already have an account with
Kinvey or Parse and that you already have an app created in the backend
provider.
o
Creating an Account with Kinvey
Creating an Account with Parse
Creating an App with Kinvey
Creating an App with Parse
Design and Set Up of the User Interface

This tutorial uses a TListView as UI component to display the information retrieved
from the cloud.
To set up the UI for this sample tutorial follow these steps:
Application
Application
2. Drop a TLabel on the form and set the following properties in the Object
Inspector:
Set the Text property to Shopping List.
Set the Align property to Top.
Set the HorzAlign property in TextSettings to Center.
298
3. Drop a TButton on the TLabel and set the following properties in the
Object Inspector:
Set the StyleLookup property to refreshtoolbutton.
Set the Name property to RefreshButton.
4. Drop a TEdit on the form and set the following properties in the Object
Inspector:
Set the Align property to Top.
5. Drop a TButton on the TEdit and set the following properties in the Object
Inspector:
Set the Text property to Add Item.
Set the Name property to AddItemButton.
6. Drop a TListView on the form and set the following properties in the Object
Inspector:
Adding the Backend Components

This tutorial uses the TBackendStorage service component to manage the
backend storage in order to create, retrieve, update, and delete objects. This
app also uses one of the BaaS provider components:
o
TKinveyProvider is the Kinvey BaaS provider component that contains the

information about the Kinvey could service connection.
TParseProvider is the Parse BaaS provider component that contains the

information about the Parse could service connection.
Continue with the following steps:

1. Drop one of the two BaaS provider components on the form
TKinveyProvider or TParseProvider depending on the backend provider
you use in your app.
2. Drop a TBackendStorage on the form, and in the Object Inspector set the
Provider property to the BaaS provider component you are using.
299
3. Depending on the BaaS provider you are using:
Select the KinveyProvider1 component and in the Object Inspector

set the AppKey, AppSecret and MasterSecret to the values
provided by Kinvey.
Select the ParseProvider1 component and in the Object Inspector

set the ApplicationID, MasterKey and RestApiKey to the values
provided by Parse.
300
Creating and Storing Objects

In the app, when you type something in the TEdit and click Add Item, the
content typed in the TEdit gets stored in the cloud, in the Kinvey or Parse BaaS
provider. To create the object, use the CreateObject method.
1. Double-click the AddItemButton and type the following code:
Delphi:
procedure TForm1.AddItemButtonClick(Sender: TObject);
var
LJSONObject: TJSONObject;
LEntity: TBackendEntityValue;
begin
if Edit1.Text = '' then
ShowMessage('Please, enter an item.')
else
begin
LJSONObject := TJSONObject.Create;
LJSONObject.AddPair('item', Edit1.Text);
BackendStorage1.Storage.CreateObject('ShoppingList', LJSONObject,
LEntity);
ShowMessage('New item created: ' +Edit1.Text);
LJSONObject.Free;
Edit1.Text := '';
end
end;
C++:
void __fastcall TForm1::AddItemButtonClick(TObject *Sender)
{
TJSONObject *LJSONObject;
TBackendEntityValue LEntity;
if (Edit1->Text == "") {
ShowMessage("Please, enter an item.");
}
else {
LJSONObject = new TJSONObject;
LJSONObject->AddPair("item", Edit1->Text);
BackendStorage1->Storage->CreateObject("ShoppingList",
LJSONObject, LEntity);
ShowMessage("New item created: "+ Edit1->Text);
LJSONObject->Free();
delete LJSONObject;
Edit1->Text="";
}
}
301
Deleting Objects
To allow users to delete any item from the list. In the TListView component, if you
swipe your finger left or right over one of the items of the TListView, a Delete
button displays on the right-hand side. To delete the item when the Delete
button of such item is clicked, do the following:
1. Select the TListView and in the Events tab of the Object Inspector, doubleclick the OnDeletingItem event. This event occurs before the item is
deleted. Add the following code:
Delphi:
procedure TForm1.ListView1DeletingItem(Sender: TObject; AIndex: Integer; var
ACanDelete: Boolean);
var
LQuery: string;
LJSONArray : TJSONArray;
LEntities: TArray<TBackendEntityValue>;
begin
ACanDelete := False;
LJSONArray := TJSONArray.Create;
try
LQuery := Format('query={"item":"%s"}', [(Sender as
TListView).Items[AIndex].Text]); // 'query={"item":"%s"}' in Kinvey and
'where={"item":"%s"}' in Parse
BackendStorage1.Storage.QueryObjects('ShoppingList', [LQuery], LJSONArray,
LEntities);
if (Length(LEntities) > 0) and
BackendStorage1.Storage.DeleteObject('ShoppingList', LEntities[0].ObjectID)
then
ACanDelete := True
else
ShowMessage ('Item could not be deleted.');
finally
LJSONArray.Free;
end;
end;
Note: The line LQuery :=Format('query={"item":"%s"}',[(Sender as

TListView).Items[AIndex].Text]); is for Kinvey. In Parse, the word query must
change to where so if you are using Parse as BaaS provider, this line must be
LQuery :=Format('where={"item":"%s"}',[(Sender as TListView).Items[AIndex].Text]);.
302
C++:
void __fastcall TForm1::ListView1DeletingItem(TObject *Sender, int AIndex, bool
&ACanDelete)
{
System::UnicodeString LQuery[1];
DynamicArray<TBackendEntityValue> LEntities;
ACanDelete = False;
TJSONArray *LJSONArray;
LJSONArray = new TJSONArray;
try {
TListView* list = reinterpret_cast<TListView*>(Sender);
LQuery[0] = ("query={\"item\":\""+(list->Items->Item[AIndex]>Text)+"\"}"); // "query={\"item\":\"" in Kinvey and "where={\"item\":\"" in
Parse
BackendStorage1->Storage->QueryObjects("ShoppingList", LQuery,
0, LJSONArray, LEntities);
if (((LEntities.Length)>0) & BackendStorage1->Storage>DeleteObject("ShoppingList", LEntities[0].ObjectID)) {
ACanDelete = True;
} else {
ShowMessage("Item could not be deleted.");
}
}
__finally {
LJSONArray->Free();
}
}
Note: The line LQuery[0]=("query={\"item\":\""+(list->Items->Item[AIndex]>Text)+"\"}"); is for Kinvey. In Parse, the word query must change to where so if
you are using Parse as BaaS provider, this line must
be LQuery[0]=("where={\"item\":\""+(list->Items->Item[AIndex]->Text)+"\"}");.
303
Retrieving Objects
To update all content in the TListView to reflect any possible change, you can
retrieve the objects with QueryObjects, clear the list view and add all items you
have retrieved from the backend storage.
1. To add a new method to refresh the list:
Delphi:
Open the Class Explorer window by choosing View > Class Explorer.
In the Class Viewer pane, right-click TForm1 under Unit1 and select
Add Method.
Write RefreshList under Method name, select Procedure under

Method type" and click OK.
304
C++:
Open the Class Explorer window by choosing View > C++ Class
Explorer.
In the Type List pane (left pane), expand your project, right-click
TForm1 under and select Add Method.
Write RefreshList under Name, void under Return type, set

Visibility to public and click Add.
305
2. Add the following code to the new method:

Delphi:
procedure TForm1.RefreshList;
var
LJSONArray : TJSONArray;
LItem: TListViewItem;
I: Integer;
begin
LJSONArray := TJSONArray.Create;
try
BackendStorage1.Storage.QueryObjects('ShoppingList', [], LJSONArray);
ListView1.ClearItems;
for I := 0 to LJSONArray.Count-1 do
begin
LItem := ListView1.Items.Add;
LItem.Text := (LJSonArray.Items[I].GetValue<string>('item'));
end;
finally
LJSONArray.Free;
end;
end;
C++:
void TForm1::RefreshList()
{
String LQuery [1];
TJSONArray *LJSONArray;
TListViewItem *LItem;
TJSONObject *LJSONObject;
String ItemText;
int i;
LJSONArray = new TJSONArray;
try {
BackendStorage1->Storage->QueryObjects("ShoppingList",
LQuery, 0, LJSONArray);
ListView1->ClearItems();
for (i = 0; i < LJSONArray->Count; i++) {
LItem = ListView1->Items->Add();
LJSONObject = dynamic_cast<TJSONObject
*>(LJSONArray->Items[i]);
ItemText = (LJSONObject->Values["item"]>Value());
LItem->Text = ItemText;
}
}
__finally {
LJSONArray->Free();
}
}
306
3. Double-click the RefreshButton and the following code so this button calls
the RefreshList method:
Delphi:
procedure TForm1.RefreshButtonClick(Sender: TObject);
begin
RefreshList;
end;
C++:
void __fastcall TForm1::RefreshButtonClick(TObject *Sender)
{
RefreshList();
}
4. To refresh the list once an item is added, double-click the AddItemButton

to access the code of the OnClick event added before and add the
following code as the very last sentence of the else statement:
Delphi:
RefreshList;
C++:
RefreshList();
307
5. To refresh the list after an item is deleted, select the TListView and in the
Events tab of the Object Inspector, double-click the OnDeleteItem event.
This event occurs after the item is deleted. Add the following code:
Delphi:
procedure TForm1.ListView1DeleteItem(Sender: TObject; AIndex: Integer);
begin
RefreshList;
end;
C++:
void __fastcall TForm1::ListView1DeleteItem(TObject *Sender, int AIndex)
{
RefreshList();
}

To run your application, follow these steps:
1. In the Project Manager, select the target platform where you want to run
your app.
Note: This app uses the swipe-to-delete feature that is supported on mobile apps
(iOS and Android), as well as desktop apps (Windows and Mac OS X) when
touch input is available.
2. Select Run > Run or Run > Run Without Debugging.
308
3. Once you add or delete items in your application, you can go to your
Kinvey console or to your Parse dashboard to see the changes also from
the cloud.
iOS
iPod
Android
Nexus 7
See Also
o
BaaS Overview
Managing BaaS Users
Using BaaS for Backend Storage
Code Samples
o
BaaS ToDo Sample
309
Mobile Tutorial: Using InterBase

ToGo with dbExpress (iOS and
Android)
Caution: dbExpress, which is described in this tutorial, is being deprecated. This
means that dbExpress will be removed from RAD Studio in an upcoming release.
Instead of dbExpress, we recommend that you use our newer database solution,
FireDAC, which is described in a similar tutorial, here:
Mobile Tutorial: Using InterBase ToGo with FireDAC (iOS and Android).
session:
o

Android)
Tip: Following this tutorial requires a license for IBToGo or IBLite:
o
If you purchased one of the following RAD Studio versions,

you have received in Email a key for an unlimited
development and deployment license for IBLite:
RAD Studio Berlin Professional or higher
Delphi Berlin Professional or higher with Mobile
If you are a trial user, your installation includes a trial license

for IBToGo. You can test InterBase on iOS and Android by
selecting your test license during the deployment step, as
described in this tutorial. The trial licenses are installed with
your trial product, in
C:\Users\Public\Documents\Embarcadero\InterBase\redis
t\InterBaseXE7.
Note: On Android devices, InterBase ToGo apps require specific permissions to

be set, specifically:
o
Read external storage (the database is placed in the external memory)
Write external storage (the database is placed in the external memory)
Internet (you need to connect with a remote server)
This tutorial describes the basic steps to browse data managed by InterBase
ToGo on your iOS and Android devices through the dbExpress framework.
310
iOS
Android
Note: You can use FireDAC, dbExpress, and Interbase Express (IBX) components
to build Interbase ToGo applications. For a detailed discussion on Interbase
Express components usage in a Delphi application, read the Getting Started with
InterBase Express article. For this tutorial, we will connect to Interbase ToGo using
dbExpress framework.
Using dbExpress to Connect to the Database

dbExpress is a very fast database access framework, written in Delphi. RAD
Studio provides drivers for most major databases, such as InterBase, Oracle, DB2,
SQL Server, MySQL, Firebird, SQLite and ODBC. You can access these different
databases using procedures similar to the procedure described here.
o
For the mobile platforms, dbExpress supports InterBase ToGo as well as

SQLite. These database products can run on iOS and Android devices.
For other databases, such as Oracle, you need to have at least a client
library. On Windows platforms, the client library is provided as a DLL to
connect to. Therefore, you need to develop applications using middle-tier
technologies such as DataSnap to connect to these database products
from a mobile device.
311
Another tutorial discusses how to connect to Enterprise Database without using a

client library on a mobile device; see Mobile Tutorial: Connecting to an Enterprise
Database from a Mobile Client (iOS and Android).

This tutorial uses TListView and TPanel components as the UI elements.
To set up a ListView and a Panel component, use the following steps:
1. To create an HD Multi-Device Application, select either of the following:

Application
2. Drop a TListView component on the form.

3. In the Object Inspector, set the following properties of the ListView:
Set the Align property to Client, so that the ListView component

uses the entire form.
Set the ItemAppearance to ListItemRightDetail.
Set the SearchVisible to true.
4. Add a TPanel component to the form, and set the following properties in
the Object Inspector:
Set the Align property for the TPanel component to Top.
5. Add a TLabel component to the Panel, and set the following properties in
Set the Align property for the TLabel component to Client.
Set the StyleLookup property to toollabel.
Set the HorzAlign property from TextSettings to Center.
Set the Text property to DB DEMO.
312
Connecting to the Data

Following are the basic steps to connect to data in a database using dbExpress:
1. On the Tool Palette, double-click the TSQLConnection component.
2. In the Object Inspector, set the following properties for TSQLConnection:

1. This app uses InterBase ToGo, so set the Driver property to
IBLite/ToGo.
2. Set the LoginPrompt property to False, so that the user is not

prompted for a login.
3. Click the ellipsis [...] for the Params property, and set the Database
value to
C:\Users\Public\Documents\Embarcadero\Studio\18.0\Samples\D
ata\dbdemos.gdb (location of the database).
4. Ensure the VendorLib value is set to ibtogo.dll (client software

library); then click ok to close the dialog box:
313
5. Set the Connected property to True.

Note: If you get an error ("unavailable database") on development environment,
this means you do not have a current license for InterBase. The license of
InterBase Developer Edition is included as part of the product for some product
editions. For more information, see Troubleshooting.
2. Add a TSQLDataSet component to the form, and set the following
properties:
1. Set the SQLConnection property to SQLConnection1 (the one that
you added in a previous step).
2. Set the CommandText property to select COMMON_NAME,
SPECIES_NAME from BIOLIFE order by COMMON_NAME.
3. Set the Active property to True.
314
3. Open the LiveBindings Designer and connect the data and the user
interface as follows:
1. Click COMMON_NAME in SQLDataSet1, and drag the mouse cursor
to Item.Text in ListView1.
At this point, TBindSourceDB and TBindingsList components were added to the

form.
2. Click SPECIES_NAME in BindSourceDB1, and drag the mouse cursor
to Item.Detail in ListView1.
315
Deploying Your Application to Mobile

Up to this point, you have used InterBase on your desktop. This means that the
actual database is located at your local hard disk drive (for example,
C:\Users\Public\Documents\Embarcadero\Studio\18.0\Samples\Data\dbdem
os.gdb). On the mobile Device, the application is sand-boxed, and typically you
can only read and write data that is located in the Documents folder (for iOS
device) and internal storage (for Android device) under your application folder.
To connect to a local database on mobile, you need to perform the following
actions:
o
Deploy the database to the mobile Device.
Check the configuration (to connect to the database file) to a local file
under the Documents folder (for iOS device) or internal storage (for
Android device).
Deploy InterBase ToGo, dbExpress Driver, and the Database File to

Mobile
To execute your application on mobile, you need to deploy the following files:
o
Interbase ToGo
dbExpress Driver to InterBase (for iOS Simulator)
The database file (dbdemos.gdb)
1. You can add the database to your project with one of the following two
methods:
Right-click the project name in the Project Manager and select

Add from the context menu (or Project > Add to Project) to
display the Add to Project dialog box. Navigate to the database
location
ata, select the database dbdemos.gdb and click Open.
Navigate to the database location

ata and drag and drop the database dbdemos.gdb to the project in
the Project Manager. Click Yes to confirm that you want to add the
file to your project.
316
2. After adding the database file, the Featured Files window displays. Select
the following database modules, and then click OK to close the Featured
Files dialog box:
InterBase ToGo. You need to select the license to be used when

deploying the application on the device.
The Tip at the beginning of this tutorial describes how to

activate an InterBase license.
The suggested names for the license files available are listed
in the Featured Files dialog, under the following name
pattern: reg_*.txt.
As you can see in the image below, the reg_ibtogo.txt license file is selected for
this tutorial.
You might have received from Embarcadero a license file

for IBToGo or IBLite that has a pattern of reg_nnnnnnn.txt,
where nnnnnnn is a generated number:
If you have saved that file over reg_ibtogo.txt or

reg_iblite.txt in the location below (for example,
C:\Users\Public\Documents\Embarcadero\InterBase
\redist\InterBaseXE7), you can just select the
desired license.
If you have saved the file with its original name, then
select Add Files (shown in the next step) and include
the license file in the list of files that need to be
deployed with the application.
DBExpress InterBase Driver
Tip: If you plan to test your application on the iOS Simulator, then you also have
to select the DBExpress InterBase Driver for iOS Simulator.
317
318
3. Open the Deployment Manager by selecting Project > Deployment.

4. Select Debug configuration - iOS Device platform or Debug configuration Android platform from the drop-down list of target platforms at the top of
the Deployment Manager and see that the database dbdemos.gdb has
been added to the platforms.
5. See how the Remote Path of dbdemos.gdb has been set for iOS and
Android platforms:
Remote Path on iOS Device platform: StartUp\Documents\
Remote Path on Android platform: assets\internal\
As you just configured, when you run the app on the mobile device, the
database file (dbdemos.gdb) is to be deployed to the Documents folder (for iOS
platform) or internal storage (for Android platform) in the sandbox area of your
multi-device application.
Modify Your Code to Connect to a Local Database File on Mobile

As described in the previous step, the TSQLConnection component is connected
to a database on your local file system with an absolute path. So you need to
replace the location of the file before connecting to the database, as follows:
1. In the Form Designer, select the SQLConnection1 component.
2. In the Object Inspector, double-click the Value field of the BeforeConnect
event.
319
3. Add the following code to this event handler:

Delphi:
procedure TForm1.SQLConnection1BeforeConnect(Sender: TObject);
begin
{$IF DEFINED(iOS) or DEFINED(ANDROID)}
SQLConnection1.Params.Values['Database'] :=
TPath.Combine(TPath.GetDocumentsPath, 'dbdemos.gdb');
{$ENDIF}
end;
C++:
void __fastcall TForm1::SQLConnection1BeforeConnect(TObject *Sender)
{
#if defined(_PLAT_IOS) || defined(_PLAT_ANDROID)
SQLConnection1->Params->Values["Database"] =
System::Ioutils::TPath::Combine(System::Ioutils::TPath::GetDocumentsPath(),
"dbdemos.gdb");
#endif
}
The TPath record is declared in System.IOUtils unit, so you need to add

System.IOUtils in the uses clause.
320
Run Your Application on a Simulator or on a Mobile

Device
Now your application is ready to run. You should be able to browse data just as
you can in the IDE. You can narrow down the list using the Search Box.
iOS
Android
321
Troubleshooting
InterBase Issues
See the following section with detailed information about Interbase License
Issues.
Note: Follow the steps at IBLite and IBToGo Test Deployment Licensing to obtain a
valid license file.
Exception Handling Issues

If your application raises an exception without having proper exception handling
code, your multi-device application simply crashes (disappears) at run time.
If you encounter a crash, you might want to connect manually to the database
while you troubleshoot the issue using the following steps:
1. Select the SQLConnection1 component, and change the Connected
property to False.
2. Drop a button on the form, and create the following event handler to
manually connect to the database:
Delphi:
begin
try
SQLConnection1.Connected := True;
SQLDataSet1.Active := True;
except
on e: Exception do
begin
ShowMessage(e.Message);
end;
end;
end;
C++:
try {
SQLConnection1->Connected = True;
SQLDataSet1->Active = True;
}
catch(Exception *e) {
ShowMessage(e->Message);
}
3. Check the error message.
322
See Also
o
InterBase ToGo with dbExpress
IBLite and IBToGo Licensing in RAD Studio
http://www.embarcadero.com/products/interbase/product-editions
Getting Started with InterBase Express
Mobile Tutorial: Using dbExpress and SQLite (iOS and Android)
Mobile Tutorial: Connecting to an Enterprise Database from a Mobile

Client (iOS and Android)
Mobile Tutorial: Using FireDAC in Mobile Applications (iOS and Android)
323
Mobile Tutorial: Using InterBase ToGo with FireDAC (iOS and Android)
Mobile Tutorial: Using InterBase

ToGo with FireDAC (iOS and Android)
session:
o

Android)
Tip: To follow this tutorial, you need a license for IBToGo or IBLite:
o
If you purchased one of the following RAD Studio versions,

you have received in Email a key for an unlimited
development and deployment license for IBLite:
RAD Studio Berlin Professional or higher
Delphi Berlin Professional or higher with Mobile
If you are a trial user, your installation includes a trial license

for IBToGo. You can test InterBase on iOS and Android by
selecting your test license during the deployment step, as
described in this tutorial. The trial licenses are installed with
your trial product, in
C:\Users\Public\Documents\Embarcadero\InterBase\redis
t\InterBaseXE7.
Follow the steps at IBLite and IBToGo Test Deployment Licensing to

obtain and install your license file.
Note: On Android devices, InterBase ToGo apps require specific permissions to
be set, specifically:
o
Read external storage (the database is placed in the external memory)
Write external storage (the database is placed in the external memory)
Internet (you need to connect with a remote server)
This tutorial describes the basic steps to browse data managed by InterBase
ToGo on your iOS and Android devices through the FireDAC framework.
324
iOS
Android
Note: You can use FireDAC, dbExpress, and Interbase Express (IBX) components
to build Interbase ToGo applications. For a detailed discussion on Interbase
Express components usage in a Delphi application, read the Getting Started with
InterBase Express article. For this tutorial, we will connect to Interbase ToGo using
FireDAC.
325
Using FireDAC to Connect to the Database

FireDAC is a unique set of Universal Data Access Components for developing
cross-platform database applications for Delphi and C++Builder. With its powerful
common architecture, FireDAC enables native high-speed direct access from
Delphi to InterBase, SQLite, MySQL, SQL Server, Oracle, PostgreSQL, IBM DB2, SQL
Anywhere, Access, Firebird, Informix, and more.
o
For the mobile platforms, FireDAC supports InterBase ToGo as well as



This tutorial uses TListView and TPanel components as the UI elements.
To set up a ListView and a Panel component, use the following steps:
1. To create an HD Multi-Device Application, select either of the following:

Application
2. Drop a TListView component on the form.

3. In the Object Inspector, set the following properties of the ListView:

Set the ItemAppearance to ListItemRightDetail.
Set the SearchVisible to true.
4. Add a TPanel component to the form, and set the following properties in
Set the Align property for the TPanel component to Top.
326
5. Add a TLabel component to the Panel, and set the following properties in
Set the Align property for the TLabel component to Client.
Set the Views to either iOS or Android.
Set the StyleLookup property to listboxitemlabel.
Set back the Views to Master.
Set the HorzAlign property in TextSettings to Center.
Set the Text property to DB DEMO.

Following are the basic steps to connect to data in a database using FireDAC:
1. On the Tool Palette, double-click the TFDConnection component.
2. Right-click the TFDConnection component and choose Connection Editor.
327
3. In the FireDAC Connection Editor, set the following parameters of the

TFDConnection:
1. Set the Driver ID property to IB.
2. Set the Database parameter to:
C:\Users\Public\Documents\Embarcadero\Studio\18.0\Samples\Data\dbdemos.
gdb (location of the database)
and click Open in the File Open dialog box.

3. Set the User_name parameter to sysdba.
4. Set the Password parameter to masterkey.
5. Set the Protocol parameter to TCPIP.
6. Click the Test button to test the connection.

7. Click OK to close the Connection Editor.
328
4. In the Object Inspector, set the following properties of TFDConnection:

Note: If you get an error ("unavailable database") in the development
environment, this means you do not have a current license for InterBase. The
license of InterBase Developer Edition is included as part of the product for some
product editions. For more information, see Troubleshooting.
5. Add a TFDQuery component to the form.
6. Right-click the TFDQuery component and choose Query Editor.
1. Write in the SQL Command Text editor select COMMON_NAME,
SPECIES_NAME from BIOLIFE order by COMMON_NAME.
2. Click the Execute button to see the command results.
3. Click OK to close the Query Editor.

7. In the Object Inspector, set the Active property of the TFDQuery
component to True.
329
8. Open the LiveBindings Designer and connect the data and the user
interface as follows:
1. Click COMMON_NAME in FDQuery1, and drag the mouse cursor to
Item.Text in ListView1.
At this point, TBindSourceDB and TBindingsList components were added to the

form.
2. Click SPECIES_NAME in BindSourceDB1, and drag the mouse cursor
to Item.Detail in ListView1.
330
9. Add a TFDPhysIBDriverLink component to the form.

10. Add a TFDGUIxWaitCursor component to the form.
Note: The Preparing a FireDAC Application for Run Time topic explains the use of
the TFDGUIxWaitCursor and TFDPhysIBDriverLink components in a FireDAC
application.
331
Deploying your Application to Mobile

Up to this point, you have used InterBase on your desktop. This means that the
actual database is located at your local hard disk drive (for example,
C:\Users\Public\Documents\Embarcadero\Studio\18.0\Samples\Data\dbdemos.
gdb). On the mobile Device, the application is sand-boxed, and typically you
actions:
o
Deploy the database to the mobile device.
Android device).
Deploying InterBase ToGo Required Files and the Database File to

Mobile
To execute your application on mobile, you need to deploy the following files:
o
Interbase ToGo required file (the license file and other configuration files)
The database file (dbdemos.gdb)
Deploy these files to your application as follows:

methods:

location
ata, select the database dbdemos.gdb and click Open.

ata and drag and drop the database dbdemos.gdb to the project in
the Project Manager. Click Yes to confirm that you want to add the
file to your project.
332
2. After adding the database file, the Featured Files window displays. Select
InterBase ToGo in the Feature Files, and then click OK to close the
Featured Files dialog box.
Under the node InterBase ToGo you need to select the license to
be used when deploying the application on the device.
The Tip at the beginning of this tutorial describes how to

activate an InterBase license.
The suggested names for the license files available are listed
in the Featured Files dialog, under the following name
pattern: reg_*.txt.
As you can see in the image below, the reg_ibtogo.txt license file is selected for
this tutorial.
You might have received from Embarcadero a license file

for IBToGo or IBLite that has a pattern of reg_nnnnnnn.txt,
where nnnnnnn is a generated number:
If you have saved that file over reg_ibtogo.txt or

reg_iblite.txt in the location below (for example,
C:\Users\Public\Documents\Embarcadero\InterBase
\redist\InterBaseXE7), you can just select the
desired license.
If you have saved the file with its original name, then
select Add Files (shown in the next step) and include
the license file in the list of files that need to be
deployed with the application.
333
334

4. Select Debug configuration - iOS Device - 32 bit platform, Debug
configuration - iOS Device - 64 bit platform or Debug configuration Android platform from the drop-down list of target platforms at the top of
the Deployment Manager and see that the database dbdemos.gdb has
5. See how the Remote Path of dbdemos.gdb has been set for iOS and
Android platforms:
database file (dbdemos.gdb) is to be deployed to the Documents folder (for iOS
platform) or internal storage (for Android platform) in the sandbox area of your
multi-device application.
For the TFDConnection, create the BeforeConnect event handler as follows:
1. In the Form Designer, select the TFDConnection component.
2. In the Object Inspector, go to the Events tab and double-click the
BeforeConnect event.
335
3. Implement the event handler for the BeforeConnect event by adding the
following code:
For Delphi:
procedure TForm1.FDConnection1BeforeConnect(Sender: TObject);

begin
FDConnection1.Params.Values['Protocol'] := 'Local';
FDConnection1.Params.Values['Database'] :=
TPath.Combine(TPath.GetDocumentsPath, 'dbdemos.gdb');
{$ENDIF}
end;

System.IOUtils in the uses clause, as follows:
implementation
{$R *.fmx}
{$R *.NmXhdpiPh.fmx ANDROID}
{$R *.iPhone4in.fmx IOS}
uses System.IOUtils;
// previous code goes here
For C++:
void __fastcall TForm1::SQLConnection1BeforeConnect(TObject *Sender)

{
FDConnection1->Params->Values["Protocol"] = "Local";
FDConnection1->Params->Values["Database"] =
System::Ioutils::TPath::Combine(System::Ioutils::TPath::GetDocumentsPath(
), "dbdemos.gdb");
#endif
}
You need to add #include <System.IOUtils.hpp> in the unit (.cpp file).
336
Run Your Application on a Simulator or on a Mobile

Device
Now your application is ready to run (Run > Run or press F9). You should be able
to browse data just as you can in the IDE. You can narrow down the list using the
Search Box.
iOS
Android
Troubleshooting
InterBase Issues
See the following section with detailed information about Interbase License
Issues.
Note: Follow the steps at IBLite and IBToGo Test Deployment Licensing to obtain a
valid license file.
337
Exception Handling Issues

If your application raises an exception without having proper exception handling
code, your multi-device application simply crashes (disappears) at run time.
If you encounter a crash, you might want to connect manually to the database
while you troubleshoot the issue using the following steps:
1. Select the FDConnection1 component, and change the Connected
property to False.
2. Drop a button on the form, and create the following event handler to
manually connect to the database:
Delphi:
begin
try
FDConnection1.Connected := True;
FDQuery1.Active := True;
except
on e: Exception do
begin
end;
end;
end;
C++:
try {
FDConnection1->Connected = true;
FDQuery1->Active = true;
}
catch(Exception &e) {
}
}
3. Check the error message.
338
See Also
o
InterBase ToGo
IBLite and IBToGo Licensing
http://www.embarcadero.com/products/interbase/product-editions
Mobile Tutorial: Using FireDAC and SQLite (iOS and Android)

Samples
o
FireDAC InterBase sample
339
Mobile Tutorial: Using dbExpress and

SQLite (iOS and Android)
Caution: dbExpress, which is described in this tutorial, is being deprecated. This
means that dbExpress will be removed from RAD Studio in an upcoming release.
Instead of dbExpress, we recommend that you use our newer database solution,
FireDAC, which is described in a similar tutorial, here:
Mobile Tutorial: Using FireDAC and SQLite (iOS and Android).
session:
o

and Android)
This tutorial describes the basic steps to use SQLite as a local data storage on
your mobile device through the dbExpress framework.
iOS
Android
340
Using dbExpress to Connect to the Database

dbExpress is a very fast database access framework, written in Delphi. RAD
Studio provides drivers for most major databases, such as InterBase, Oracle, DB2,
SQL Server, MySQL, Firebird, SQLite, and ODBC. You can access these different
databases using procedures similar to the procedure described here.
o
For the mobile platforms, dbExpress supports InterBase ToGo as well as


Creating the Database in the Windows Environment

for Development Purposes
First, you need to create a SQLite database file on your Windows development
platform. Use the following steps, so that you can use the Form Designer to
design the user interface of your application.
Create the Database in the Data Explorer

1. Go to Data Explorer, right-click the SQLite node and select Add New
Connection:
2. Define the name of the connection, such as ShoppingList.
341
3. Specify the location of the database file:
4. Click the Advanced button and open the Advanced Properties dialog
box.
342
5. Change the FailIfMissing property to False and click OK to close the

Advanced Properties dialog box:
Note: Setting FailIfMissing to False instructs the Data Explorer to create a new
database file if the file is not available.
6. Back on the Modify Connection dialog box, click the Test Connection
button. With this operation, the new database file is created if no file
existed:
Note: Ensure that sqlite3.dll is present on your development system. If this file is
not present, download sqlite3.dll from http://www.sqlite.org/download.html to
your system path (such as C:\Windows\SysWOW64 for 64-bit Windows).
343
Create Table on DataExplorer

1. On the Data Explorer, double-click the ShoppingList node under the
SQLite section, right-click Tables, and then select New Table from the
context menu.
2. Set Data Type for a ShopItem column to TEXT.
3. Click the Save button and specify a table name (for example, Item.)
344
Visible UI components are loaded on the designer

This tutorial uses one TListBox component as the UI element.
To set up a ListBox component and other UI elements, use the following steps:
1. Create a multi-device application using File > New > Multi-Device
Application - Delphi or File > New > Multi-Device Application - C++Builder.
2. Drop a TToolBar on the form.
3. Drop a TButton on the ToolBar component and set the following properties
in the Object Inspector:
Set the Align to Right.
Set the Name property to ButtonAdd.
Set the StyleLookup to addtoolbutton.
345
Set the Align to Left.
Set the Name property to ButtonDelete.
Set the StyleLookup to deletetoolbutton.
Set the Text to Delete.
Set the Visible to False.
5. Drop a TLabel on the ToolBar component and set the following properties
Set the Align to Client.
Set the StyleLookup to toollabel.
Set the Text to Shopping List.
Set the TextSettings.HorzAlign to Center.
6. Drop a TListBox component on the form and set the following properties in
Set the Align property to Client, so that the ListBox component uses
the entire form.
346

Following are the basic steps to connect to data in a database which is already
defined in the Data Explorer:
1. Select the Item table on the Data Explorer and drag it to the Form
Designer.
Note: This creates two components (ShoppinglistConnection: TSQLConnection

and ItemTable: TSQLDataSet) on the form.
2. Select the ShoppinglistConnection component on the form, and then

change the Connected property to True.
3. Select the ItemTable component on the form, and then change the
Active property to True.
4. Select View > LiveBindings Designer and the LiveBindings Designer opens.
347
5. Select ShopItem in the ItemTable component and drag ShopItem to

Item.Text of ListBox1.
Following these steps connects the user interface of the app with data on a
SQLite database. If you used a table with existing data for this tutorial, now you
should see actual data within the Form Designer.
348
Creating the Event Handler to Make the Delete Button

Visible When the User Selects an Item from the List
The Visible property for the Delete button is set to False. Therefore, by default, the
end user does not see this button. You can make it visible when the user selects
an item on the list, as follows:
o
Select ListBox1 and define the following event handler for the OnItemClick
event.
Delphi:
procedure TForm1.ListBox1ItemClick(const Sender: TCustomListBox;
const Item: TListBoxItem);
begin
if ListBox1.Selected <> nil then
ButtonDelete.Visible := True
else
ButtonDelete.Visible := False;
end;
C++Builder:
void __fastcall TForm1::ListBox1ItemClick(const TCustomListBox *Sender,const
TListBoxItem *Item)
{
if (ListBox1->Selected)
ButtonDelete->Visible = True;
else
ButtonDelete->Visible = False;
}
349
Creating the Event Handler for the Add Button to Add

an Entry to the List
Database connections are also configured

The next step is adding a feature to this application for adding an item to the
shopping list.
1. Drop a TSQLQuery component to the form.
350
2. Set the following properties in the Object Inspector:
Set the Name property to SQLQueryInsert.
Set the SQLConnection property to ShoppinglistConnection.
Set the SQL property as follows:
INSERT INTO ITEM (ShopItem) VALUES (:ShopItem)
Select the Expand (...) button on the Params property.
Select the ShopItem parameter and set DataType to ftString:
351
3. In the Form Designer, double-click the ButtonAdd component. Add the

Delphi:
procedure TForm1.ButtonAddClick(Sender: TObject);
begin
TDialogServiceAsync.InputQuery('Enter New Item', ['Name'], [''],
Self.OnInputQuery_Close);
end;
procedure TForm1.OnInputQuery_Close(const AResult: TModalResult; const AValues:
array of string);
var
TaskName: string;
begin
TaskName := string.Empty;
if AResult <> mrOk then
Exit;
TaskName := AValues[0];
try
if not (TaskName.Trim = string.Empty) then
begin
SQLQueryInsert.ParamByName('ShopItem').AsString := TaskName;
SQLQueryInsert.ExecSQL();
ItemTable.Refresh;
LinkFillControlToField1.BindList.FillList;
else
end;
except
on Ex: Exception do
ShowMessage('Error: ' + Ex.Message);
end;
end;
Declare this procedure prototype under the private section of the Form class:
private
procedure OnInputQuery_Close(const AResult: TModalResult; const AValues:
array of string);
352
C++Builder:
To replicate the same functionality in C++, additional steps are required:
1. Add the next type definition after the TForm1 definition:
typedef void __fastcall (__closure *TInputCloseQueryProcEvent)(const
System::Uitypes::TModalResult AResult,
System::UnicodeString const *AValues, const int AValues_High);
2. Add the next class definition:

class InputQueryMethod : public TCppInterfacedObject<TInputCloseQueryProc>
{
private:
TInputCloseQueryProcEvent Event;
public:
InputQueryMethod(TInputCloseQueryProcEvent _Event) {
Event = _Event;
}
void __fastcall Invoke(const System::Uitypes::TModalResult AResult,
System::UnicodeString const *AValues, const int AValues_High) {
Event(AResult, AValues, AValues_High);
}
};
3. Add the next declaration under the private section of the form:
void __fastcall OnInputQuery_Close(const System::Uitypes::TModalResult AResult,
353
4. Add the actual functions:

void __fastcall TForm1::ButtonAddClick(TObject *Sender) {
String caption = "Caption";
String Prompts[1];
Prompts[0] = "Prompt 0";
String Defaults[1];
Defaults[0] = "Default 0";
_di_TInputCloseQueryProc Met = new InputQueryMethod(&OnInputQuery_Close);
TDialogServiceAsync::InputQuery(
"caption", Prompts, 0, Defaults, 0, (TInputCloseQueryProc *)Met);
}
void __fastcall TForm1::OnInputQuery_Close(const System::Uitypes::TModalResult
AResult,
String TaskName;
TaskName = "";
if (AResult != mrOk)
return;
TaskName = AValues[0];
try {
if (TaskName.Trim() != "")
SQLQueryInsert->ParamByName("ShopItem")->AsString = TaskName;
SQLQueryInsert->ExecSQL();
ItemTable->Refresh();
LinkFillControlToField1->BindList->FillList();
if (ListBox1->Selected != NULL)
else
}
catch (Exception& Ex) {
ShowMessage("Error: " + Ex.Message);
}
}
The InputQuery function shows a dialog box asking the end user to enter a text.
This function returns True when the user selects OK, so that you can add data to
the database only when the user selects OK and the text contains some data.
354
iOS
Android
355
Creating the Event Handler for the Delete Button to

Remove an Entry from the List
The next step is adding a feature to this application to remove an item from the
shopping list:
1. Drop a TSQLQuery component to the form.
Set the Name property to SQLQueryDelete.
Set the SQLConnection property to ShoppinglistConnection.
delete from Item where ShopItem = :ShopItem
Select the ShopItem parameter and set DataType to ftString.
3. In the Structure View, select the ButtonDelete component. Add the

following code to this event handler.
Delphi:
procedure TForm1.ButtonDeleteClick(Sender: TObject);
var
TaskName: String;
begin
TaskName := ListBox1.Selected.Text;
try
SQLQueryDelete.ParamByName('ShopItem').AsString := TaskName;
SQLQueryDelete.ExecSQL();
ItemTable.Refresh;
LinkFillControlToField1.BindList.FillList;
else
except
on e: Exception do
begin
SHowMessage(e.Message);
end;
end;
end;
356
C++Builder:
void __fastcall TForm1::ButtonDeleteClick(TObject *Sender) {
String TaskName = ListBox1->Selected->Text;
try {
SQLQueryDelete->ParamByName("ShopItem")->AsString = TaskName;
SQLQueryDelete->ExecSQL();
ItemTable->Refresh();
LinkFillControlToField1->BindList->FillList();
if (ListBox1->Selected)
else
}
catch (Exception &e) {
}
}
Setting Up Your Database Deployment for Mobile

Platforms
Up to this point, you have used SQLite on your desktop. This means that the
actual database is located on your local hard disk drive (for example,
C:\Users\Public\Documents\Embarcadero\Studio\18.0\Samples\Data\shoplist
.s3db). On the mobile device, applications are sand-boxed, and typically you
actions:
o
Android device).
357
Add and Configure Your Database File in the Deployment Manager

Before you can run your application on mobile, you need to set up the
deployment for your database file (shoplist.s3db).
methods:

location
ata, select the database shoplist.s3db and click Open.

ata and drag and drop the database shoplist.s3db to the project
in the Project Manager. Click Yes to confirm that you want to add
the file to your project.
2. After adding the database file, the Featured Files window displays, click
Cancel to close it.
the Deployment Manager and see that the database shoplist.s3db has
5. See how the Remote Path of shoplist.s3db has been set for iOS and
Android platforms:
database file (shoplist.s3db) is set to be deployed to the Documents folder (for
iOS platform) or internal storage (for Android platform) in the sandbox area of
your multi-device application.
358
Modifying Your Code to Connect to a Local Database

File on Mobile Platforms
The basic features of this application are now implemented. As you worked in
the Data Explorer, you created a database file on Windows. The database file is
not available on your mobile device unless you copy it to the mobile device or
create it on the fly.
You can create a SQLite Database and Table with the following steps:
Specifying the Location of the SQLite Database on the Mobile Device

1. In the Form Designer, select the ShoppinglistConnection component.
2. In the Object Inspector, double-click the BeforeConnect event.
Delphi:
procedure TForm1.ShoppinglistConnectionBeforeConnect(Sender: TObject);
begin
ShoppinglistConnection.Params.Values['ColumnMetadataSupported'] := 'False';
ShoppinglistConnection.Params.Values['Database'] :=
TPath.Combine(TPath.GetDocumentsPath, 'shoplist.s3db');
{$ENDIF}
end;

System.IOUtils in the uses clause of your unit.
C++Builder:
void __fastcall TForm1::ShoppinglistConnectionBeforeConnect(TObject *Sender) {
ShoppinglistConnection->Params->Values["ColumnMetadataSupported"] =
"False";
ShoppinglistConnection->Params->Values["Database"] =
"shoplist.s3db");
#endif
}
The TPath record is declared in System.IOUtils library, so you need to add

#include <System.IOUtils.hpp> in your header unit.
359
Creating a Table if None Exists

With SQLite you can create a table when no table exists, by using the CREATE
TABLE IF NOT EXISTS statement. You can create a table after the
TSQLConnection component connects to the database and before the
TSQLDataSet component connects to the table. Use the following steps:
1. In the Form Designer, select the ShoppinglistConnection component.
2. In the Object Inspector, double-click the AfterConnect event.
Delphi:
procedure TForm1.ShoppinglistConnectionAfterConnect(Sender: TObject);
begin
ShoppinglistConnection.ExecuteDirect('CREATE TABLE IF NOT EXISTS Item
(ShopItem TEXT NOT NULL)');
end;
C++Builder:
void __fastcall TForm1::ShoppinglistConnectionAfterConnect(TObject *Sender){
ShoppinglistConnection->ExecuteDirect("CREATE TABLE IF NOT EXISTS Item
(ShopItem TEXT NOT NULL)");
}
360
Running Your Application on a Mobile Device

mobile device.
361
Run > Run
iOS
Android
Note: If you have an issue with running the application, follow the
steps given in Troubleshooting.
362
See Also
o

SQLite support in RAD Studio
363
Mobile Tutorial: Using FireDAC and

SQLite (iOS and Android)
session:
o

Android)
your mobile device through the FireDAC framework.
iOS
Android
364

cross-platform database applications for Delphi and C++Builder. With its powerful
o
For the mobile platforms, FireDAC supports InterBase ToGo as well as

technologies such as DataSnap REST to connect to these database
products from a mobile device.

Creating the Database using FireDAC framework

First, you need to create a SQLite database file on your Windows development
platform. Use the following steps, so that you can use the Form Designer to
design the user interface of your Mobile App.
Note: In the Form Designer, activate the Master view for this tutorial.
1. To create an Multi-Device Application, select:
Application
Application
2. On the Tool Palette, double-click the TFDConnection component.
3. Right click the TFDConnection component and choose Connection Editor.
365

TFDConnection:
Set the Driver ID property to SQLite.
Set the Database parameter to:
.s3db (location of the database)

Note: You can set the above Database parameter even if shoplist.s3db does not
exist, RAD Studio creates it automatically. (To display Employees.s3db or other
*.s3db files in the Open dialog, set the All Files (*.*) option.)
Set the LockingMode parameter to normal.
Click the Test button to test the connection.
Click OK to close the Connection Editor.
366
Set the LoginPrompt property to False, so that the user is not

Set the Connected property to True.
6. On the Tool Palette, double-click the TFDQuery component.

7. In the Object Inspector, set the following properties of TFDQuery:
Set the Name property to FDQueryCreateTable.
CREATE TABLE IF NOT EXISTS Item (ShopItem TEXT NOT NULL)
8. Right click the FDQueryCreateTable and choose Execute.
Visible UI components are loaded on the designer

This tutorial uses one TListView component as the UI element.
367
To set up a ListView component and other UI elements, use the following steps:
1. Drop a TToolBar on the form.
Set the Name property to ButtonAdd.
Set the StyleLookup to addtoolbutton.
Set the Align to Right.
Set the Name property to ButtonDelete.
Set the StyleLookup to deletetoolbutton.
Set the Align to Left.
Set the Text to Delete.
4. Drop a TLabel on the ToolBar component and set the following properties
Set the Align to Client.
Set the StyleLookup to toollabel.
Set the Text to Shopping List.
Expand the TTextSettings node and set the HorzAlign property to

Center.
5. Drop a TListView component on the form and set the following properties

368
Using the LiveBindings Wizard

This tutorial uses the LiveBindings Wizard to add the LiveBindings components
(TBindSourceDB, TBindingsList), and the TFDQuery component.
Add the LiveBinding components

2. Select LiveBindings Wizard.
3. Select Create a data source binding task.

4. Click the Next button.
5. Select FireDAC class name.
7. Change the Command Type to Query.
369
8. Set the Command Text property to select ShopItem from Item.
9. Click the Test Command button.

11. Click the Finish button.
At this point, TBindSourceDB and TFDQuery components were added to your
form.
370

1. Reopen the LiveBindings Wizard.
2. Select Link a control with a field binding task.

4. Select the Existing Control tab.
5. Select the ListView1 component.
7. Select BindSourceDB1.
371
9. Select ShopItem Field Name.

11. Click the Finish button to close the wizard.
Note: These last steps are not mandatory for this tutorial since there is only one
field in BindSourceDB1. These steps are useful to link with the selected value if we
are managing several fields of a database.
372
Displaying ShopItem in the ListView

The following step displays the text of ShopItem in the TListView component.
1. In the LiveBindings Designer select ShopItem in the BindSourceDB1
component and drag ShopItem to Item.Text in ListView1.
Following these steps connects the user interface of the app with data on a
SQLite database. If you used a table with existing data for this tutorial, now you
should see actual data within the Form Designer.
Creating the Event Handler to Make the Delete Button

Visible When the User Selects an Item from the List
The Visible property for the Delete button is set to False. Therefore, by default, the
end user does not see this button. You can make it visible when the user selects
an item on the list, as follows:
o
Select ListView1 and define the following event handler for the
OnItemClick event.
Delphi:
procedure TForm1.ListView1ItemClick(const Sender: TObject;
const AItem: TListViewItem);
begin
ButtonDelete.Visible := ListView1.Selected <> nil;
end;
For C++:
void __fastcall TForm1::ListView1ItemClick(const TObject *Sender,

const TListViewItem *AItem) {
ButtonDelete->Visible = (ListView1->Selected != NULL);
}
373
Creating the Event Handler for the Add Button to Add

an Entry to the List
Database connections are also configured

The next step is adding a feature to this application for adding an item to the
shopping list.
1. Drop a TFDQuery component on the form.
Set the Name property to FDQueryInsert.
INSERT INTO ITEM (ShopItem) VALUES (:ShopItem)
Select the ShopItem parameter and set DataType to ftString:
374
3. In the Structure View, right-click the ButtonAdd component and select

Control > Bring to Front. This brings the button to the visual front of the
active form.
o
For Delphi:
Declare the following procedure in the private section:
private
procedure OnInputQuery_Close(const AResult: TModalResult; const AValues:
array of string);
Add the following procedure :
procedure TForm1.OnInputQuery_Close(const AResult: TModalResult; const AValues:

array of string);
var
TaskName: String;
begin
TaskName := string.Empty;
if AResult <> mrOk then
Exit;
TaskName := AValues[0];
try
if (TaskName.Trim <> '')
then
begin
FDQueryInsert.ParamByName('ShopItem').AsString := TaskName;
FDQueryInsert.ExecSQL();
FDQuery1.Close();
FDQuery1.Open;
end;
except
on e: Exception do
begin
end;
end;
end;
In the Form Designer, double-click the ButtonAdd component. Add the

procedure TForm1.ButtonAddClick(Sender: TObject);

begin
TDialogServiceAsync.InputQuery('Enter New Item', ['Name'], [''],
Self.OnInputQuery_Close)
end;
375
For C++:
To replicate the same functionality in C++, additional steps are required.

o
Add the following definition after the TForm1 definition (in the .h file of your
unit):
typedef void __fastcall(__closure * TInputCloseQueryProcEvent)

(const System::Uitypes::TModalResult AResult,
Add the following class definition (in the .h file of your unit, after the
previously defined type):
class InputQueryMethod : public TCppInterfacedObject<TInputCloseQueryProc>

{
private:
TInputCloseQueryProcEvent Event;
public:
InputQueryMethod(TInputCloseQueryProcEvent _Event) {
Event = _Event;
}
void __fastcall Invoke(const System::Uitypes::TModalResult AResult,
Event(AResult, AValues, AValues_High);
}
};
Add the following declaration under the private section of the form (in the
.h file of your unit):
private: //User declarations

void __fastcall OnInputQuery_Close
(const System::Uitypes::TModalResult AResult,
376
Add the following code (in the .cpp file of your unit):
void __fastcall TForm1::OnInputQuery_Close(const System::Uitypes::TModalResult

AResult,
String TaskName;
TaskName = "";
if (AResult != mrOk)
return;
TaskName = AValues[0];
try {
if (!(Trim(TaskName) == "")) {
FDQueryInsert->ParamByName("ShopItem")->AsString = TaskName;
FDQueryInsert->ExecSQL();
FDQuery1->Close();
FDQuery1->Open();
}
}
}
}
In the Form Designer, double-click the ButtonAdd component. Add the

void __fastcall TForm1::ButtonAddClick(TObject *Sender) {

String caption = "Enter New Item";
String Prompts[1];
Prompts[0] = "Name:";
String Defaults[1];
Defaults[0] = "";
_di_TInputCloseQueryProc Met = new InputQueryMethod(&OnInputQuery_Close);
TDialogServiceAsync::InputQuery(
caption, Prompts, 0, Defaults, 0, (TInputCloseQueryProc *)Met);
}
The InputQuery function shows a dialog box asking the end user to enter text. This
function returns True when the user selects OK, so that you can add data to the
database only when the user selects OK and the text contains some data.
377
iOS
Android
378
Creating the Event Handler for the Delete Button to

Remove an Entry from the List
The next step is adding a feature to this application to remove an item from the
shopping list:
1. Drop a TFDQuery component on the form.
Set the Name property to FDQueryDelete.
delete from Item where ShopItem = :ShopItem
Select the ShopItem parameter and set DataType to ftString.
3. In the Structure View, right-click the ButtonDelete component and select

Control > Bring to Front. This brings the button to the visual front of the
active form.
4. In the Form Designer, double-click the ButtonDelete component. Add the
following code to this event handler.
o
For Delphi:
procedure TForm1.ButtonDeleteClick(Sender: TObject);

var
TaskName: String;
begin
TaskName := TListViewItem(ListView1.Selected).Text;
try
FDQueryDelete.ParamByName('ShopItem').AsString := TaskName;
FDQueryDelete.ExecSQL();
FDQuery1.Close;
FDQuery1.Open;
except
on e: Exception do
begin
SHowMessage(e.Message);
end;
end;
end;
379
For C++:
void __fastcall TForm1::ButtonDeleteClick(TObject *Sender) {

String TaskName = ((TListViewItem*)(ListView1->Selected))->Text;
try {
FDQueryDelete->ParamByName("ShopItem")->AsString = TaskName;
FDQueryDelete->ExecSQL();
FDQuery1->Close();
FDQuery1->Open();
}
}
}
Preparing Your Application for Run Time

FireDAC has a loosely-coupled multilayered architecture, where layers provide
services. A service API is defined as a COM interface that other layers can
request using the interface factory.
To properly operate FireDAC, you must link the implementation of the
IFDGUIxWaitCursor and IFDPhysDriver interfaces to your application.
For this, drop the TFDGUIxWaitCursor and TFDPhysSQLiteDriverLink components on
the form.
Setting Up Your Database Deployment for mobile

.s3db). On the mobile Device, applications are sand-boxed, and typically you
actions:
o
Android device).
380

deployment for your database file (shoplist.s3db).
methods:

location
ata, select the database shoplist.s3db and click Open.

ata and drag and drop the database shoplist.s3db to the project
in the Project Manager. Click Yes to confirm that you want to add
the file to your project.
2. After adding the database file, the Featured Files window displays, click
Cancel to close it.
the Deployment Manager and see that the database shoplist.s3db has
5. See how the Remote Path of shoplist.s3db has been set for iOS and
Android platforms:
database file (shoplist.s3db) is set to be deployed to the Documents folder (for
iOS platform) or internal storage (for Android platform) in the sandbox area of
your multi-device application.
381

File on mobile
The basic features of this application are now implemented. Following the steps
from this tutorial, you created a database file on Windows. The database file is
not available on your mobile device unless you copy it to the mobile device or
create it on the fly.
You can create a SQLite Database and Table with the following steps:

1. In the Form Designer, select the FDConnection1 component.
o
For Delphi:

begin
TPath.Combine(TPath.GetDocumentsPath, 'shoplist.s3db');
{$ENDIF}
end;

implementation
{$R *.fmx}
uses System.IOUtils;
For C++:
void __fastcall TForm1::FDConnection1BeforeConnect(TObject *Sender) {

System::Ioutils::TPath::Combine(System::Ioutils::TPath::GetDocumentsPath
(), "shoplist.s3db");
#endif
}
You need to add #include <System.IOUtils.hpp>.
382
Creating a Table if None Exists

With SQLite you can create a table when no table exists, by using the CREATE
TABLE IF NOT EXISTS statement. You can create a table after the
TFDConnection component connects to the database and before the TFDQuery
component connects to the table. Use the following steps:
2. In the Object Inspector, double-click the AfterConnect event.
o
For Delphi:
procedure TForm1.FDConnection1AfterConnect(Sender: TObject);

begin
FDConnection1.ExecSQL('CREATE TABLE IF NOT EXISTS Item (ShopItem
NULL)');
end;
TEXT NOT
For C++:
void __fastcall TForm1::FDConnection1AfterConnect(TObject *Sender) {

FDConnection1->ExecSQL("CREATE TABLE IF NOT EXISTS Item (ShopItem
NULL)");
}
TEXT NOT
383
Running Your Application on a Simulator or on a

Mobile Device
mobile device.
384
Run > Run

iOS
Android
Note: If you have an issue with running the application, follow the
steps given in Troubleshooting.
385
See Also
o

SQLite support in RAD Studio
386
Mobile Tutorial: Connecting to an Enterprise Database from a Mobile Client (iOS and Android)
Mobile Tutorial: Connecting to an

Enterprise Database from a Mobile
Before starting this tutorial:
o
Read and perform the following tutorial session:
Mobile Tutorial: Using ListBox Components to Display a Table View

(iOS and Android)
Mobile Tutorial: Using InterBase ToGo with dbExpress (iOS and

Android)
Choose Start | Programs | Embarcadero InterBase XE7 | <xx>-bit instance

= gd_db | InterBase Server Manager and verify that the InterBase server is
running. The InterBase server must be running before you create or run the
example.
This tutorial describes how to connect to an Enterprise database from a mobile

client application.
To connect to an Enterprise Database, you need to have a client library. In most
cases, the client library is provided by the database vendor in DLL format. This
strategy does not work well for mobile devices because no client library is
available. To resolve this issue, you can develop a middle tier to connect to an
Enterprise Database, and your application can communicate with the middle
tier.
RAD Studio provides the DataSnap framework with which you can develop the
middle tier (and access the middle tier) with almost no coding required. This
tutorial describes the steps to develop the middle tier and then develop the
mobile client.
387
Creating the Middle Tier, a DataSnap Server

First, create a DataSnap server that exposes a table from a database server. This
tutorial uses a DataSnap Server VCL Forms Application as a DataSnap server.
Note: In this tutorial, the DataSnap server (a VCL application)
functions as the middle tier in a multi-tiered database application.
You can easily create and later delete an instance of a DataSnap
server. After you understand the basic steps, you can convert the
middle tier to a Windows service application.
388
Create a DataSnap Server VCL Application

1. In order to create a new Delphi or C++ project, choose File > New > Other
and from the New Items dialog select:
For Delphi:Delphi Projects > DataSnap Server > DataSnap Server
For C++:C++Builder Projects > DataSnap Server > DataSnap Server
389
2. The New DataSnap Server wizard appears:
1. At first step, choose Forms Application as project type.

2. At the second step, check VCL Application as application type.
3. At the third step, choose the TCP/IP protocol, Server Methods Class
and Sample Methods from the Server Features list.
4. At the fourth step, leave the default TCP/IP communications port to
211. This will ensure that the communication between the client
and the server will pass through the default DataSnap port.
5. At the final step (number five) select TDSServerModule as the
ancestor for the Server Methods.
2. Save the form unit as DataSnapServerUnit.
3. Switch to DataSnapServerUnit, and change the Name property of the
Form to DSServerForm.
4. Save the server methods unit (by default as created by the Wizard:
ServerMethodsUnit1) as ServerModuleUnit.
5. Save the server container unit (by default as created by the Wizard:
ServerContainerUnit1) as ServerContainerUnit.
6. Save the new project as DataSnapServerProject.
390
7. Select ProjectGroup1 in the Project Manager, and save the project as

DataSnapTutorialProjectGroup.groupproj.
Define a DataSet on the DataSnap Server

1. Switch to the ServerContainerUnit.pas file and replace the uses clause in
the implementation with: uses Winapi.Windows, ServerModuleUnit, for
Delphi, and replace #include "ServerMethodsUnit.h" with #include
"ServerModuleUnit.h" in ServerContainerUnit.cpp, for C++;
2. Switch to the ServerModuleUnit.pas file.
3. In the Form Designer, change the Name property of the Server Module to
DSServerModule_EMPLOYEE.
391
4. Configure the following components on the Server Module:
Drop a TSQLConnection component on the Server Module, and set

the following properties:
TSQLConnection encapsulates a dbExpress connection to a database server.
Set the Name property to SQLConnection_EMPLOYEE.
Set the LoginPrompt property to False.
Set Driver to InterBase Server.
Note: Make sure that the InterBase Server is running.
Expand the Driver node, and set the DataBase property to

C:\Users\Public\Documents\Embarcadero\Studio\18.0\Sam
ples\Data\EMPLOYEE.GDB.
Change the Connected property to True. If you get an error,

double-check the Driver properties:
Drop a TSQLDataSet component on the Server Module, and set the

following properties:
392
TSQLDataSet represents the data retrieved using dbExpress.
Set the Name property to SQLDataSet_EMPLOYEE.
Set the SQLConnection property to

SQLConnection_EMPLOYEE.
Set the CommandType property to ctTable.
Set the CommandText property to EMPLOYEE.
Change the Active property to True. If you get an error,

double-check the properties you just configured.
Drop a TDataSetProvider component on the Server Module, and

set the following properties:
TDataSetProvider packages data from a dataset and passes one or more

transportable data packets to the DataSnap client.
Set the Name property to DataSetProvider_EMPLOYEE.
Set the DataSet property to SQLDataSet_EMPLOYEE:
Note: This tutorial uses InterBase as an example. However, you can

connect to any database server using the same steps. Select the
proper driver, and other properties to point to your database.
393
Expose the DataSet from the DataSnap Server

You have just created a new Server Module that contains a DataSet and a
DataSetProvider that packages data to the next layer. The next step is to expose
the Server Module to the DataSnap client.
1. In the Form Designer, open ServerContainerUnit.
2. Select DSServerClass1, and update the existing event handler for the
OnGetClass event. Add the following code to the DSServerClass1 event
handler:
Delphi:
procedure TServerContainer1.DSServerClass1GetClass(DSServerClass:
TDSServerClass;
var PersistentClass: TPersistentClass);
begin
PersistentClass := TDSServerModule_EMPLOYEE;
end;
C++ (only for iOS):

void __fastcall TServerContainer1::DSServerClass1GetClass(TDSServerClass
*DSServerClass,
TPersistentClass &PersistentClass)
{
PersistentClass = __classid(TDSServerModule_EMPLOYEE);
}
With this event handler, the DataSnap Server exposes providers as well as public
methods in this class to a DataSnap client. Based on the steps in the previous
section, now you are going to expose the DataSetProvider_EMPLOYEE
DataSetProvider component to your DataSnap client.
394
Run the DataSnap Server

Implementation of the DataSnap Server is complete. Right-click
DataSnapServerProject.exe and select Run Without Debugging.
.
Now you can see the DataSnap server running on your Windows machine.
Because this DataSnap server has no UI element, it looks like a blank form, and
this is as expected at this point.
395
Creating a Mobile Application that Connects to the

DataSnap Server
The next step is creating the mobile client application.
1. In the Project Manager, right-click DataSnapTutorialProjectGroup, and
select Add New Project.
2. Select Multi-Device Application on the Delphi Projects page:
3. Save the new Unit as DataSnapClientUnit.

4. Save the new Project as DataSnapClientProject.
5. Open DataSnapClientUnit, and change the Name property of the Form to
DSClientForm.
6. Drop the following components on the Form Designer:
TSQLConnection component (SQLConnection1)
396
TSQLConnection encapsulates a dbExpress connection to a database server.

Also, it supports the DataSnap server.
Set the Driver property to DataSnap.
Expand the Driver property, and set the HostName property

to the host name or IP address of the DataSnap server.
Set the LoginPrompt property to False.
If you see an error, please double-check the properties you have just set.
TDSProviderConnection component (DSProviderConnection1)
The TDSProviderConnection component provides connectivity to the DataSnap

server using dbExpress.
Set the SQLConnection property to SQLConnection1.
Set ServerClassName to TDSServerModule_EMPLOYEE. This

name needs to match the name of the class of the Server
Module of the DataSnap server.
TClientDataSet component (ClientDataSet1)
TClientDataSet implements a database-independent dataset, and this can be

used as a local in-memory buffer of the records from another dataset.
Set the RemoteServer property to DSProviderConnection1.
Set the ProviderName property to

DataSetProvider_EMPLOYEE. This name needs to match the
name of the provider for the DataSnap server.
Set the Active property to True.
TListBox component
Set the Align property to Client:
397
7. Open the LiveBindings Designer and connect the data and user interface
as follows:
1. Click FULL_NAME in BindSourceDB1, and drag the mouse cursor to
Item.Text in ListBox1:
398
2. Now you have created and configured the DataSnap Client on

the mobile platform. You should be able to see the data coming
from the DataSnap server in the IDE:
iOS
Android
399
Deploy the MIDAS Library to iOS Simulator

To execute your application on the iOS Simulator, you need to deploy the
following files:
o
MIDAS Library

2. Select Add Featured Files (
):
3. Select the following module, and then click OK to close the Deployment
Manager:
MIDAS Library
Run Your Application on the mobile platform

Now your application is ready to run.
In the Project Manager, select the mobile target platform, and run your
application. You should be able to browse data just as you do within the IDE.
400
See Also
o
Developing DataSnap Applications
Understanding Multi-tiered Database Applications
Datasnap.DSServer.TDSServer
Start the InterBase Server
401
Mobile Tutorial: Using FireDAC in

Mobile Applications (iOS and
Android)
your mobile device through the FireDAC framework.
iOS
Android

multi-device database applications for Delphi and C++Builder. With its powerful
402
The FireDAC native driver supports SQLite database version 3.0 and later. For a
detailed discussion on SQLite usage in FireDAC for a Delphi application, read the
"Using SQLite with FireDAC" article.
To use SQLite in your application, the sqlite3.dll file must be present on your
development system. If this file is not present, download sqlite3.dll from
http://www.sqlite.org/download.html to your system path (such as
C:\Windows\SysWOW64 for 64-bit Windows).

Create a new project. Choose a Multi-Device Application.
1. Drop a TFDConnection component on the form.
2. Right click the TFDConnection component and choose Connection Editor.
TFDConnection:
1. Set the Driver ID property to SQLite.
2. Set the Database parameter to:
C:\Users\Public\Documents\Embarcadero\Studio\18.0\Samples\Data\Employee
s.s3db (location of the database)

(To display Employees.s3db in the Open dialog, set the All Files (*.*) option.)
403
3. Click the Test button to test the connection.
4. Click OK to close the Connection Editor.


Use the LiveBindings Wizard to add the LiveBindings components
(TBindSourceDB, TBindingsList), TFDQuery, and the TListView component.
Add the LiveBinding components

2. Select LiveBindings Wizard.
3. Select Create a data source binding task.

5. Select FireDAC class name.
404
7. Change the Command Type to Query.

8. Set the Command Text property to select Name, Department, Seniority
from Employee order by Department.
9. Click the Test Command button.

11. Click the Finish button.
At this point, TBindSourceDB and TFDQuery components were added to your
form.
405
Add the ListView component

1. Reopen the LiveBindings Wizard.
2. Select Link a control with a field binding task.

4. Select TListView.
6. Select BindSourceDB1.
406
8. Select Name Field Name.

10. Click the Finish button to close the wizard.
407
Use the LiveBindings Designer to add new connections between the
TBindSourceDB and TListView components.
1. Select the ItemHeader.Text member from TListView.
2. Bind to the Department member of the BindSourceDB1 component by
dragging (a connection line appears).
3. Select the Item.Text member from TListView.
4. Bind to the Name member of the BindSourceDB1 component by dragging
(a connection line appears).
5. In the Object Inspector, set the following properties of TListView:
1. Set the ItemAppearance to ImageListItemRightButton.
In the LiveBindings Designer, the TListView should have a new member,
Item.ButtonText.
2. Set the Align property to Client.
6. In the LiveBindings Designer, select the Item.ButtonText member from
TListView.
7. Bind to the Seniority member of the BindSourceDB1 component by
dragging (a connection line appears).
408
Preparing Your Application for Run Time

FireDAC has a loosely-coupled multilayered architecture, where layers provide
services. A service API is defined as a COM interface that other layers can
request using the interface factory.
To properly operate FireDAC, you must link the implementation of the
IFDGUIxWaitCursor and IFDPhysDriver interfaces to your application.
For this, drop the TFDGUIxWaitCursor and TFDPhysSQLiteDriverLink components
on the form.
Setting Up Your Database Deployment for mobile

C:\Users\Public\Documents\Embarcadero\Studio\18.0\Samples\Data\Employ
ees.s3db). On the mobile device, applications are sand-boxed, and typically
you can only read and write data that is located in the Documents folder (for iOS
actions:
o
Change the configuration (to connect to the database file) to a local file
Android device).

deployment for your database file (Employees.s3db).
2. Select Add Files and select the database file (for example,
C:\Users\Public\Documents\Embarcadero\Studio\18.0\Samples\Data\
Employees.s3db).
409
3. Select Employees.s3db, and change Remote Path to StartUp\Documents\

(for iOS platform) or assets\internal\ (for Android platform).
RemotePath on iOS device platform
RemotePath on Android platform
4. Select the Platforms column (double-click the ellipsis [...] in the row for
Employees.s3db):
1. Ensure that iOSSimulator, iOSDevice32 and iOSDevice64 or Android
are present for Employees.s3db.
2. Remove Win32 from the list if it is present (you do not have to copy
database files to the Win32 platform).
5. Select All-Configurations - iOS Device - 32 bit platform, All-Configurations iOS Device - 64 bit platform or All-Configurations - Android platform and
make sure Employees.s3db is set to be deployed to StartUp\Documents\
or assets\internal\.
database file (Employees.s3db) is set to be deployed to the Documents folder
(for iOS platform) or internal storage (for Android platform) in the sandbox area
of your application.

File on Mobile
The basic features of this application are now implemented. The database file
used in this application was created on Windows and the file is not available on
your mobile device unless you copy it to the mobile device or create it on the fly.

410

Delphi:
begin
TPath.Combine(TPath.GetDocumentsPath, 'Employees.s3db');
end;

C++ (only for iOS):
void __fastcall TForm1::FDConnection1BeforeConnect(TObject *Sender)
{
FDConnection1->Params->Values["ColumnMetadataSupported"] = "False";
"Employees.s3db");
}
The TPath record is declared in System.IOUtils library, so you need to add

#include <System.IOUtils.hpp> in your header unit.
411
Running Your Application on the Simulator or on the

Mobile Device
Now your application is ready to run (select Run > Run).
iOS
Android
See Also
o
Connect to SQLite (FireDAC)
Preparing a FireDAC Application for Run Time

Tutorial: Using FireDAC from a Multi-Device Application on Desktop

Platforms
412
Mobile Tutorials: Table of

Components Used
The following table lists the FireMonkey components that are used in each of the
mobile tutorials:
Mobile Tutorial
Creating a Multi-Device
Application (iOS and Android)
Using a Button Component with
Different Styles (iOS and Android)
Using a Calendar Component to
Pick a Date (iOS and Android)
FireMonkey Components, Properties and Methods

Used
TEdit, TButton, TLabel
KillFocusByReturn, Text, Name
TButton, TSpeedButton
Position, Height, Width, StyleLookup, TintColor,
IconTintColor, GroupName, IsPressed
TDateEdit
ShowCheckBox
Using Combo Box Components to TComboBox

Pick Items from a List (iOS and
ItemIndex, IndexOf, OnChange
Android)
Using a MultiView Component to
Display Alternate Views of
Information (iOS and Android)
Using the Web Browser

Component (iOS and Android)
TMultiView, TDrawerAppearance
Visible, Mode, MasterButton, DoOpen, DoClose,
GetDisplayName, DoInstall, TargetControl,
DrawerOptions, ShadowOptions
TWebBrowser, TButton, TVirtualKeyboard
ReturnKeyType, GoBack, KeyboardType,
KillFocusByReturn
Using Tab Components to Display

Pages (iOS and Android)
TTabControl, TTabItem, MultiResBitmap Editor,

ActionList, TButton
Using LiveBindings to Populate a

ListView (iOS and Android)
TListView, TPrototypeBindSource, TextButton
Using ListBox Components to

Display a Table View (iOS and
Android)
TListBox, TLabel, TToolBar, TSpeedButton, TSearchBox,

TListBoxHeader, TListBoxGroupHeader,
TListBoxGroupFooter
Align, StyleLookup, HorzAlign, Text, Accessory,
TListBoxItemData.Detail, Bitmap, StyleLookup,
TListBoxItemData.Detail
413
Using LiveBindings to
Populate a ListBox in TListBox, DefaultItemStyles.ItemStyle, TRectangle,
Mobile Applications TPrototypeBindSource, LiveBindings Designer,
(iOS and Android)
Using Layout to
Adjust Different Form TLayout and its properties: Align, Margins, Padding, and Anchors
Sizes or Orientations TVertScrollBox
(iOS and Android)
Taking and Sharing a
Picture, and Sharing
Text (iOS and
Android)
TToolBar, TImage, TActionList, FMX.MediaLibrary,

TTakePhotoFromCameraAction, OnDidFinishTaking,
OnBeforeExecute,TShowShareSheetAction, TToolBar, TButton,
TMemo
Using Location
Sensors (iOS and
Android)
TListBox with added items and groupheaders, TWebBrowser,

TLocationSensor, OnLocationChanged, TSwitch, TGeocoder and
its methods
Using Notifications
(iOS and Android)
TNotificationCenter, TNotification, TNotification.Number,

ScheduleNotification, RepeatInterval
Using InterBase ToGo

TListView, TPanel, TLabel, TSQLDataSet, LiveBindings Designer,
with dbExpress (iOS
Deployment Manager
and Android)
Using SQLite and
dbExpress (iOS and
Android)
Data Explorer, TListBox, TButton, TLabel, TSQLQuery, InputQuery,

Deployment Manager
Connecting to an
Enterprise Database
from a Mobile Client
(iOS and Android)
DataSnap Server Wizard, TDSServerModule, TSQLConnection,

TSQLDataSet, TDataSetProvider, TDSProviderConnection,
TClientDataSet, TListBox
Using InterBase ToGo TFDConnection, TBindSourceDB, TFDQuery, TListView, TPanel,

with FireDac (iOS and TLabel, LiveBindings Designer, TFDGUIxWaitCursor,
Android)
FTFDPhysSQLiteDriverLink, Deployment Manager
Using FireDAC and
SQLite (iOS and
Android)
TFDConnection, LiveBindings Wizard, TBindSourceDB, TFDQuery,

TListView, LiveBindings Designer, TFDGUIxWaitCursor,
FTFDPhysSQLiteDriverLink, Deployment Manager
Using Remote
TPushEvents, AutoActivate, TKinveyProvider, AppKey, AppSecret,
Notifications (iOS and MasterSecret, TParseProvider, ApplicationID, RestApiKey,Provider,
Android)
Using BaaS for
Backend Storage
(iOS and Android)
TListView, TLabel, TButton, TBackendStorage, TKinveyProvider and

its properties AppKey, AppSecret, MasterSecret, and the
TParseProvider component and its properties ApplicationID,
MasterKey and RestApiKey
414
Note: This list of components is intended for informational purposes only, and
might not be entirely accurate or complete.
415

Mobile Tutorials en Delphi Berlin

Uploaded by

Copyright:

Available Formats

Mobile Tutorials en Delphi Berlin

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mobile Tutorials en Delphi Berlin

Uploaded by

Copyright:

Available Formats

Mobile Tutorials

RAD Studio 10.1 Berlin

2016 Embarcadero Technologies, Inc. Embarcadero, the Embarcadero

Step 6: Test Your Mobile Application ........................................................................ 44

Displaying Multi-Resolution Custom Icons on Tabs ........................................... 152

Mobile Tutorial: Using Notifications (iOS and Android)............................................ 246

See Also....................................................................................................................... 296

Connecting to the Data .......................................................................................... 347

Run Your Application on the mobile platform ...................................................... 400

Mobile Tutorials: Mobile Application Development (iOS and Android)

Mobile Tutorials: Mobile Application

The remaining tutorials demonstrate the recommended FireMonkey

These mobile tutorials are also available in PDF format here:

Set Up Your Development Environment on the Mac

Set Up Your Development Environment on Windows

Using Basic User Interface Elements

Set Up Your Development Environment on Windows

Using Basic User Interface Elements

Creating a Multi-Device Application (iOS and

Using the Address Book Component (iOS and

Using a Button Component with Different Styles (iOS

Using a Calendar Component to Pick a Date (iOS

Using Combo Box Components to Pick Items from a

Using Basic User Interface Elements

Using a Map Component to Work with Maps (iOS

Using the MultiView Component (iOS and Android)

Using the Web Browser Component (iOS and

Using Tab Components to Display Pages (iOS and

Using LiveBindings to Populate a ListView (iOS and

Using ListBox Components to Display a Table View

Using Device Functionality

Using LiveBindings to Populate a ListBox (iOS and

Using Layout to Adjust Different Form Sizes or

Using Device Functionality

Taking and Sharing a Picture, and Sharing Text (iOS

Using Location Sensors (iOS and Android)

Using Notifications (iOS and Android)

Using Backend as a Service

Mobile Tutorial: Using the Phone Dialer on Mobile

Using Backend as a Service

Mobile Tutorial: Using Remote Notifications (iOS and

Mobile Tutorial: Using BaaS for Backend Storage

Using InterBase ToGo with FireDAC (iOS and

Using InterBase ToGo with dbExpress (iOS and

Using SQLite and FireDAC (iOS and Android)

Using SQLite and dbExpress (iOS and Android)

Connecting to an Enterprise Database from a

Using FireDAC in Mobile Applications (iOS and

RAD Studio Mobile Tutorials (pdf)

Mobile Tutorials: Table of Components Used

FireMonkey Quick Start

Creating an iOS App

Creating an Android App

FireMonkey Application Design

Mobile Code Snippets

iOS Mobile Application Development

Android Mobile Application Development

Supported Target Platforms

Mobile Tutorial: Set Up Your Development Environment on the Mac (iOS)

Mobile Tutorial: Set Up Your