0% found this document useful (0 votes)
196 views4 pages

Template 7356

The document provides instructions for initial configuration of an iSAM system through the craft terminal including: 1. Connecting to the terminal and logging in 2. Configuring the management IP address, system name, management VLAN, and network interface 3. Configuring SNMP community strings, NTP server, and saving the configuration 4. Rebooting the system is required to apply the new configuration

Uploaded by

nelusabie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
196 views4 pages

Template 7356

The document provides instructions for initial configuration of an iSAM system through the craft terminal including: 1. Connecting to the terminal and logging in 2. Configuring the management IP address, system name, management VLAN, and network interface 3. Configuring SNMP community strings, NTP server, and saving the configuration 4. Rebooting the system is required to apply the new configuration

Uploaded by

nelusabie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

The initial configuration is done through the craft terminal which is placed in

the NT board. You connect to the it with a serial cable on COM1 with the followi
ng parameters:

baud rate 9600

data bits 8

parity none

stop bits 1

flow control none
If the iSAM is in default configuration you will authenticate on the system like
this:
login: isadmin
password: i$@madNext you will introduce the new password, which will be ANS#150 (two times).
If the iSAM isnt in default configuration you will authenticate on the sy
stem like this:
login: isadmin
password: ANS#150
VERIFICARE SOFTWARE VERSION ( pt. 7356 REM trebuie sa fie urmatorul :
leg:isadmin># show software-mngt oswp detail
================================================================================
oswp table (detailed)
================================================================================
-------------------------------------------------------------------------------oswp
-------------------------------------------------------------------------------index : 1
name : L6GPAA42.536
availability : enabled
act-status : active
commit-status : committed
download-error : no-error
err-file-name :
err-file-server : 0.0.0.0
auto-activate-error : no-error
-------------------------------------------------------------------------------oswp
-------------------------------------------------------------------------------index : 2
name : NO_OSWP
availability : empty
act-status : not-active
commit-status : un-committed
download-error : no-error
err-file-name :
err-file-server : 0.0.0.0
auto-activate-error : no-error
================================================================================
leg:isadmin>#
leg:isadmin>#
leg:isadmin>#
leg:isadmin># show software-mngt version etsi
================================================================================
etsi table
================================================================================
isam-release : R4.2.04
================================================================================
NOTE: In caz contrar se va scrie Flash cARDUL cu versiunea corecta.

---------------------------------------------------------------------------------------1) Setup Management IP Adresses (here: ISAM IP = 135.243.5.76, Router 135.243.5.


126, AMS IP=135.243.5.95,)
---------------------------------------------------------------------------------------leg:isadmin># configure system management host-ip-address manual:10.10.152.88/24
leg:isadmin>configure>system>management# exit all
leg:isadmin># configure system management default-route 10.10.152.1
leg:isadmin>configure>system>management>default-route$
leg:isadmin>configure>system>management>default-route$ exit all
-----------------------------------------------------------------------------------------2) Configure system name
-----------------------------------------------------------------------------------------leg:isadmin># configure system id SV_PANACI_34060_ISAM_7356FD_1
leg:isadmin>configure>system# exit all
------------------------------------------------------------------------------------------3) Configure manaement vlan (inband) on NT and SHUB
------------------------------------------------------------------------------------------leg:isadmin># configure system mgnt-vlan-id 514
leg:isadmin>configure>system# exit all
leg:isadmin># configure system shub entry vlan ext-vlan-id 514
leg:isadmin>configure>system>shub>entry>vlan# exit all
-------------------------------------------------------------------------------------------4) Configure network interface ( SHUB port) for uplink optic
-------------------------------------------------------------------------------------------leg:isadmin># configure interface shub port nt:sfp:1 port-type network admin-sta
tus auto-up
leg:isadmin>#configure vlan shub id 514 name OAM
leg:isadmin>#configure vlan shub id 514 egress-port nt:sfp:1
VERIFICARE:
leg:isadmin># info configure vlan shub id 514
configure vlan shub
#------------------------------------------------------------------------------echo "vlan"
#------------------------------------------------------------------------------id 514 mode reserved

name OAM
user2-comm disable
egress-port nt:sfp:1
exit
exit
#-------------------------------------------------------------------------------------------------------------------------------------------------------------------------4) Configure network interface ( SHUB port) for uplink electric
-------------------------------------------------------------------------------------------leg:isadmin># configure interface shub port nt:eth:1 port-type network admin-sta
tus auto-up
leg:isadmin>#configure vlan shub id 514 name OAM
leg:isadmin>#configure vlan shub id 514 egress-port nt:eth:1
---------------------------------------------------------------------------------------------6) Configure SNMP comunity for NT (public) and for SHUB (NETMAN)
---------------------------------------------------------------------------------------------leg:isadmin># configure system security snmp community public host-address 10.28
.62.30/29 context nt
leg:isadmin># configure system security snmp community NETMAN host-address 10.28
.62.30/29 context shub
unde : 135.243.5.95 este IP-ul managementului 5520 AMS
------------------------------------------------------------------------------------------------7) Configure NTP parameters for equipment ( Network Time Protocol)
------------------------------------------------------------------------------------------------leg:isadmin># configure system sntp server-ip-addr 10.28.62.30 enable timezone-o
ffset 120
unde : 10.28.62.30 este IP-ul managementului 5520 AMS
verificare:
leg:isadmin># show sntp
================================================================================
sntp table
================================================================================
operating-mode : unicast
system-time : 1970-01-01:00:30:39
shub-time : 1970-01-01:00:30:39
================================================================================
leg:isadmin># show sntp
================================================================================

sntp table
================================================================================
operating-mode : unicast
system-time : 2011-11-14:13:41:02
shub-time : 2011-11-14:13:41:02
================================================================================
Nota: Dupa cateva secunde de la momentul configurarii output-ul comenzii ''show
sntp''
trebuie sa afiseze timpul corect.
--------------------------------------------------------------------------------------------8) Save the configuration (mandatory)
--------------------------------------------------------------------------------------------leg:isadmin># admin software-mngt shub database save
9) The system need to reboot to aply the configuration (this step is necessary o
nly when
the system is configured for the first time
--------------------------------------------------------------------------------------------leg:isadmin>#admin equipment reboot-isam with-self-test
Whait for system to reboot and re-connnect via CLI using the new password provid
ed ( ANS#150)

You might also like