Scribd
Upload
98 views

BCD To 7-Segment Display Decoder

BCD to 7-segment display decoders convert binary-coded decimal (BCD) format into illuminated segments of a 7-segment display. A 7-segment display uses individual light-emitting diodes (LEDs) or liquid crystal display (LCD) segments arranged in a pattern to represent numbers or letters. BCD to 7-segment decoders have 4 binary inputs corresponding to one decimal digit, and 7 outputs to drive the segments of a 7-segment display. They allow displaying numbers from 0-9 using only 4 data bits instead of 7, reducing the number of connections and power needed to drive displays. Common examples are the 74LS47 and 74LS48 integrated circuits.

Uploaded by

John Brix Balisteros
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
98 views

BCD To 7-Segment Display Decoder

BCD to 7-segment display decoders convert binary-coded decimal (BCD) format into illuminated segments of a 7-segment display. A 7-segment display uses individual light-emitting diodes (LEDs) or liquid crystal display (LCD) segments arranged in a pattern to represent numbers or letters. BCD to 7-segment decoders have 4 binary inputs corresponding to one decimal digit, and 7 outputs to drive the segments of a 7-segment display. They allow displaying numbers from 0-9 using only 4 data bits instead of 7, reducing the number of connections and power needed to drive displays. Common examples are the 74LS47 and 74LS48 integrated circuits.

Uploaded by

John Brix Balisteros
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Display Decoder

BCD to 7-Segment Display Decoder


As we saw in the previous tutorial, aDigital Decoder IC, is a device which converts one digital
format into another and one of the most commonly used device for doing this is called the Binary
Coded Decimal (BCD) to 7-Segment Display Decoder. 7-segment LED (Light Emitting Diode)
or LCD (Liquid Crystal Display) type displays, provide a very convenient way of displaying
information or digital data in the form of numbers, letters or even alpha-numerical characters.

Typically 7-segment displays consist of seven individual coloured LEDs (called the segments),
within one single display package. In order to produce the required numbers or HEX characters
from 0 to 9 and A to F respectively, on the display the correct combination of LED segments need
to be illuminated and BCD to 7-segment Display Decoders such as the 74LS47 do just that.
A standard 7-segment LED display generally has 8 input connections, one for each LED segment
and one that acts as a common terminal or connection for all the internal display segments. Some
single displays have also have an additional input pin to display a decimal point in their lower
right or left hand corner.
In electronics there are two important types of 7-segment LED digital display.

1. The Common Cathode Display (CCD) In the common cathode display, all the cathode
connections of the LEDs are joined together to logic 0 or ground. The individual segments are
illuminated by application of a HIGH, logic 1 signal to the individual Anode terminals.

2. The Common Anode Display (CAD) In the common anode display, all the anode connections
of the LEDs are joined together to logic 1 and the individual segments are illuminated by
connecting the individual Cathode terminals to a LOW, logic 0 signal.

Common Cathode and Common Anode Format

Electrical connection of the individual diodes for a common cathode display and a common
anode display and by illuminating each light emitting diode individually, they can be made to
display a variety of numbers or characters.

7-Segment Display Format

So in order to display the number 3 for example, segments a, b, c, d and g would need to be
illuminated. If we wanted to display a different number or letter then a different set of segments
would need to be illuminated. Then for a 7-segment display, we can produce a truth table giving
the segments that need to be illuminated in order to produce the required character as shown
below.

Truth Table for a 7-segment display

7-Segment Display Elements for all Numbers.

It can be seen that to display any single digit number from 0 to 9 in binary or letters
from A to F in hexadecimal, we would require 7 separate segment connections plus one
additional connection for the LEDs common connection. Also as the segments are basically a
standard light emitting diode, the driving circuit would need to produce up to 20mA of current to
illuminate each individual segment and to display the number 8, all 7 segments would need to be
lit resulting a total current of nearly 140mA, (8 x 20mA).
Obviously, the use of so many connections and power consumption is impractical for some
electronic or microprocessor based circuits and so in order to reduce the number of signal lines
required to drive just one single display, display decoders such as the BCD to 7-Segment Display
Decoder and Driver ICs are used instead.

Binary Coded Decimal


Binary Coded Decimal (BCD or 8421 BCD) numbers are made up using just 4 data bits (a
nibble or half a byte) similar to the Hexadecimal numbers we saw in the binary tutorial, but
unlike hexadecimal numbers that range in full from 0 through to F, BCD numbers only range
from 0 to 9, with the binary number patterns of 1010 through to 1111(A to F) being invalid inputs
for this type of display and so are not used as shown below.

BCD to 7-Segment Display Decoders


A binary coded decimal (BCD) to 7-segment display decoder such as the TTL 74LS47 or
74LS48, have 4 BCD inputs and 7 output lines, one for each LED segment. This allows a smaller
4-bit binary number (half a byte) to be used to display all the denary numbers from 0 to 9 and by
adding two displays together, a full range of numbers from 00 to 99can be displayed with just a
single byte of 8 data bits.

BCD to 7-Segment Decoder

The use of packed BCD allows two BCD digits to be stored within a single byte (8-bits) of data,
allowing a single data byte to hold a BCD number in the range of 00 to 99.
An example of the 4-bit BCD input ( 0100 ) representing the number 4 is given below.

Display Decoder Example No1

In practice current limiting resistors of about 150 to 220 would be connected in series
between the decoder/driver chip and each LED display segment to limit the maximum current
flow. There are different display decoders and drivers available for the different types of
available displays, either LED or LCD. For example, the 74LS48 for common-cathode LED

types, the 74LS47 for common-anode LED types, or the CMOS CD4543 for liquid crystal
display (LCD) types.
Liquid crystal displays (LCDs) have one major advantage over similar LED types in that they
consume much less power and nowadays, both LCD and LED displays are combined together to
form larger Dot-Matrix Alphanumeric type displays which can show letters and characters as
well as numbers in standard Red or Tri-colour outputs.

You might also like