Scribd Logo
Upload

Welcome to Scribd!

  • 84 views

    MeasurIT Quadbeam MSSD53 Transmitter 0803

    Uploaded by

    cwiejkowska
    The MSSD53 transmitter is an advanced microprocessor-based instrument for use with suspended solids and turbidity sensors. It has a simple menu interface to configure measurement settings and store configuration data in two locations. Security features allow different levels of access. It provides online help for errors and can be set up for automatic sensor cleaning. Specifications include measurement input/output options, units, calibration, accuracy, and operating temperature range.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    MeasurIT Quadbeam MSSD53 Transmitter 0803

    Uploaded by

    cwiejkowska
    84 views2 pages
    The MSSD53 transmitter is an advanced microprocessor-based instrument for use with suspended solids and turbidity sensors. It has a simple menu interface to configure measurement settings and store configuration data in two locations. Security features allow different levels of access. It provides online help for errors and can be set up for automatic sensor cleaning. Specifications include measurement input/output options, units, calibration, accuracy, and operating temperature range.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The MSSD53 transmitter is an advanced microprocessor-based instrument for use with suspended solids and turbidity sensors. It has a simple menu interface to configure measurement settings and store configuration data in two locations. Security features allow different levels of access. It provides online help for errors and can be set up for automatic sensor cleaning. Specifications include measurement input/output options, units, calibration, accuracy, and operating temperature range.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    84 views2 pages

    MeasurIT Quadbeam MSSD53 Transmitter 0803

    Uploaded by

    cwiejkowska
    The MSSD53 transmitter is an advanced microprocessor-based instrument for use with suspended solids and turbidity sensors. It has a simple menu interface to configure measurement settings and store configuration data in two locations. Security features allow different levels of access. It provides online help for errors and can be set up for automatic sensor cleaning. Specifications include measurement input/output options, units, calibration, accuracy, and operating temperature range.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    represented by:

    measurIT technologies

    MSSD53 Transmitter

    The MSSD53 transmitter is an


    advanced microprocessor based
    instrument for use with 'Quadbeam'
    suspended solids and turbidity
    sensors.

    The instrument is supplied as standard


    with typical entry level defaults in the
    configuration programme. Only the
    measurement range, probe signals,
    current output and alarm levels have to
    be entered for the unit to be
    commissioned.

    However, with a simple menu driven


    operator interface the full potential of
    the MSSD53 can be used to quickly set
    up any measurement strategy.

    Configuration
    Configuration data can be stored in one
    of two independent back up locations.
    The contents of either data store can
    be downloaded into working memory for
    fast reconfiguration.

    Security
    A further enhancement is the multilevel security where day to day operator access can be limited to viewing
    data and settings only , while allowing full access to the instrument programmer.

    Online Monitoring

    The MSSD53 has 'online' help facilities that consist of a series of text error messages. These are displayed
    when either the instrument configuration is incorrect or if the sensor is not reading a sensible value for the
    instrument set-up. In addition one relay can be configured as a system fault relay to activate an alarm on
    a DCS/PLC when errors occur.

    Automatic Sensor Cleaning


    For applications that require the automatic sensor cleaning option, then either one of the set point relays
    can be configured as the clean 'initiator'. The clean duration, recovery time and interval period are all
    programmable via the keypad. During the clean and recovery period the instruments should be set to go
    'offline' which holds the current output and disables the control relays, therefore avoiding any possible plant
    upsets. The clean cycle and 'offline' mode can also be initiated remotely via separate digital switch inputs.

    MeasurIT Technologies Ltd.


    Craan, Craanford, email: [email protected] Phone: +353 (0) 53 942 8962
    Gorey, Co. Wexford, Ireland www.measurIT.com Fax: +353 (0) 53 942 8963
    represented by:

    measurIT technologies

    SPECIFICATIONS* MODEL NO. SELECTION GUIDE

    Measurement Input: Basic Model No:


    Suspended solids or turbidity using MSSD53 - Surface mounted enclosure to IP66.
    Series 10, 20, 40 and 90 Quadbeam
    S series sensors and T30 turbidity Output:
    sensor. R- Two voltage free relays are standard on all models.
    Rated 5A at 250 Vac non inductive.
    Measurement Units:
    NTU, FTU, ppm, mg/l, g/l, %, EBC or R-I- Two relays plus a fully isolated current output,
    OD can be selected and displayed. software selectable to be either 0 to 20mA or 4 to
    20mA into a maximum of 750 ohms.
    Calibration:
    Simple two point, or up to 5 point Supply Voltage:
    linearisations can be entered. U- Universal AC/DC supply 85 to 260 VAC, 50/60HZ
    10VA.
    Accuracy:
    +/- 1%. LV- 18 to 36 Volt AC/DC.

    Linearity: Sample model no: MSSD53-R-I-U


    0.1% of range.
    Optional Extras:
    Repeatability: SS Pipe Mounting Kit - To convert the wall mount to
    0.1% of range. a 2” pipe mount.

    Ambient Operating Range:


    -20oC to +60oC

    Surface mounted housing


    manufactured from
    moulded polyurethane,
    rated to IP66.

    Weight: approx 1.5kg

    EMC: Immunity to
    BS/EN500082-2.1995

    EMC: Emmisions to
    BS/EN500081-1.1994

    * Due to our policy of continuous improvements, specifications are subject to change without notice.

    MeasurIT Technologies Ltd.


    Craan, Craanford, email: [email protected] Phone: +353 (0) 53 942 8962
    Gorey, Co. Wexford, Ireland www.measurIT.com Fax: +353 (0) 53 942 8963

    You might also like