Production Part Approval Process

production
part approval
process
Production Part Approval Process (PPAP) is a well-accepted and
organized system in the automotive industry. PPAP is part of the bigger
process - Advanced Product Quality Planning (APQP).
Sheshadri Nagaraja Nittoor

QuEST Global
contents
1.0
Abstract
03
2.0
Background of APQP and PPAP Submissions
3.0
When is PPAP Approval / Re-approval Triggered?
05
4.0
Benefits of PPAP Submission & Sign Off
05
5.0
PPAP in Aerospace
06
6.0
Why PPAP while First Article Inspection Reviews (FAIR) happen today?
07
7.0
Challenges in Applying PPAP Elements in the Aerospace Industry
08
8.0
Addressing the Challenges
9.0
Conclusion
09
10.
Reference Material
10
11.
Author Profile
11
12.
About QuEST Global
11
03-04
08-09
2015, QuEST Global Services
Production Part Approval Process
Abstract
Production Part Approval Process (PPAP) is a
well-accepted and organized system in the automotive
industry. PPAP is part of the bigger process Advanced
Product Quality Planning (APQP). In the automotive
industry, the number of parts, variety of engines and
complexly-knit supply chain is greater and bigger than
any other industry.
Aerospace industry is seeing unprecedented growth,

which will continue through the decade. Along with it, the
demands for producing at a higher rate and continuity of
supply become paramount. Speed and Quality are the
top imperatives! Hence, a systematic and robust
process to approve parts for productionizing is the need
of the hour.
APQP is an organization wide platform to manage all the

requirements through a window, which entails PPAP.
Time saving, systematic, avoiding errors, data capturing,
retrieving is easy, standardisation, improved on time
delivery, early warning signals of problems helps in quick
resolution and not allowing the problem to become crisis
and Quality is the result of using APQP. Therefore it is
the right solution for current challenges in the Aerospace
& Defence (A&D) industry. International Aerospace
Quality Group (IAQG) established under SAE
International is adopting proven models from Automotive
industry to Aerospace.
Currently the way Quality Management System (QMS)

of Aerospace & Defence (A&D) business is organized
would not support the above need much. Moreover
Supply Chain, which is huge and multi-layered, is adding
to its existing challenge. The aerospace industry is
facing challenges in terms of resource, pressure to save
cost and the implementation of this APQP / PPAP being
new. Thus the need is for a proven system, which is
resourceful and addresses all the aforementioned
challenges.
Background of APQP and PPAP Submissions

About
Advanced Product Quality Planning (APQP) is a system
to help suppliers (internal and external) and
subcontractors to work seamlessly, and to develop a
product that will please the end customer. The drivers or
key success factors, for the successful implementation
of APQP are Cross Functional Team (CFT),
Management Support and Project Planning which is
illustrated in figure 1. These are identified as the Pillars
of APQP. The launch of the first APQP manual was in
June 1994.
Effective Project Planning
Management Support
Cross Functional Team
APQP
Production Part Approval Process (PPAP) as a

terminology has its origins in the automotive industry. In
1982 automotive giants General Motors, Chrysler & Ford
founded AIAG (Automotive Industry Action Group). AIAG
developed Production Part Approval Process (PPAP) to
affirm product quality planning. The first manual on
PPAP was published in February 1993. PPAP is the
fourth phase of APQP cycle where it is complied,
approved and made available for customers to review
and approve.
For every part to be manufactured, the need is for a
PPAP to be approved for the established process to run
until the next change in process. The need is not only to
approve externally supplied components for quoted
volumes under agreed quality standard requirements,
but also do it internally as well.
Figure 1: APQP Pillars
PPAP Elements as per 4th Edition of AIAG

PPAP Manual
1. Design records
10. Material performance results
2. Engineering change documents
11. Initial process studies
3. Customer engineering approval
12. Qualified laboratory documentation
4. Design FMEA
13. Appearance Approval Report
5. Process flow diagrams
14. Sample product
6. Process FMEA
15. Master sample
7. Control plan
16. Checking aids
8. Measurement System Analysis (MSA)
17. Records of compliance
9. Dimensional analysis
18. Part Submission Warrant (PSW)
There are 5 levels of submissions based on the OEMs

requirements.
PPAP Submission Levels:
Level 1 - Part Submission Warrant (PSW) only
submitted to the customer.
Level 2 - PSW with product samples and limited

supporting data.
Level 3 - PSW with product samples and complete
supporting data.
Level 4 - PSW and other requirements as defined by the
customer.
Level 5 - PSW with product samples and complete
supporting data reviewed at suppliers manufacturing
location.
PPAP aims to assure customers that the component
manufacturers have thoroughly understood the
achievability of customer requirements. Examples of
requirements are evidenced in Engineering Design
Record, Customer Specifications, etc,.
Figure 2: APQP / PPAP Lifecycle Development / Production Phase Entry, Cost Impact
When is PPAP Approval / Re-approval Triggered?

The circumstances under which PPAP should be
generated and submitted for approval is during New
Product Introduction (NPI) or any changes to the
approved process (approved PPAP). This is illustrated in
figure 3.
The level of submission of PPAP is decided by the

OEMs / Customers based on the reason for the
submission of PPAP.
PPAP Submission
Approval
Re-Approval
NPI
Any Changes to Approved Process (PPAP)
Any New Product

Development
Design
Requirements
Process (Method,
Material, Men,
Machine)
Supplier
Change in
Production Volumes
(Run at Rate)
Figure 3: PPAP Submission Scenario
Benefits of PPAP Submission & Sign Off
Implementation of PPAP helps both

(manufacturers of parts) and customers
Process functions that are clearly planned,
documented and communicated or in short
been subjected to PPAP result in:
suppliers
(OEMs).
validated,
that have
Paced Delivery:
Improves on time delivery with complete
avoidance / minimization of rework, repair or rejection
Controls quality before delivery to customer
Improved Quality ensures:
Helps tracking of part and product status
Reduced variation in manufacturing process
Saved Cost:
Statistically controlled processes
PPAP along with APQP contributes to lowering the

COPQ, which will be substantial
Consistent approach in assuring quality and providing

evidence
Confident Customer:
Enhanced customer confidence in supplier's
capabilities
Process changes are better controlled

Quality Process Monitoring & Controlling
Early identification & resolving bottlenecks
APQP & PPAP
$
Cost
Process Variation
Defects
QUALITY
DELIVERY
Waste
Rework
Figure 4: APQP & PPAP Benefits
PPAP in Aerospace
Why to Implement in Aerospace?
in such an implementation. Whenever and wherever

there is need for quality and consistent delivery against
a significant demand over a period of time, it calls for
PPAP.
PPAP has been a proven methodology in the

Automotive industry for the last two decades.
Whilst this concept is applied on all manufacturing
components in Automotive industry successfully for the
past two decades, the question is - will the same hold
good in Aerospace, Marine, Nuclear or Medical? When
we engaged with the Aerospace OEMs for the past
decade we realise that PPAP implementation is the need
of the hour. We understand the benefits that Aerospace
industry can get from implementing PPAP and at the
same time we also understand the challenges
Over the last two decades the Aerospace industry has

grown rapidly and in the next two decades it is expected
to grow at a rate of 4-5% CAGR. IAQG in April 2014
released the Aerospace APQP Manual through their
portal under Supply Chain Management Handbook
(SCMH) Section 7.2.3. The other sections that talk about
APQP are Sections 7.2.1 & 7.2.2.
Product Development Life Cycle ( 2 yrs 3 mths - 5 yrs 9 mths) example

3 Months
Pre PPAP
PPAP Life Cycle (12 mths - 36 Mths)
Engineering life Cycle

PPAP
Production PO and Demand Fulllment
6-12 Months
Qualication
Concept initiation
Approval
Program Approval
3 - 24 Months
Post PPAP (Final Approval)
3 Months
Verication
Prototype Phase
6 - 9 Months
3 - 24 Months
Stabilization
Renement and
Optimization
Pilot Phase
Launch Phase
Design FMEA
Input Data Sheet
4I
Manufacturing Process Flow Charts
Process FMEA
Process Control Plan
Process Readiness Study
Preliminary Process Cap Studies
6-12 Months
Development
Bid Feasibility
Review
1,2
Drawings and Specications
3-9 Months
Feasibility
6 - 9 Months
PPAP Active Stage (Interim)
Bidding
Planning
Gates
G1
G0
4
10
Engineering Frozen Planning
11
Dimensional Report
12
Production Validation Testing
13
Special Process Approval & NDT
14
Material Cert Docs
15
Raw Material Approval
16
Part Marking Approval
17
G3
G4
3
G5
4I
Measurements Systems Evaluation
G2
Product Design and Development
Process Design and Development
16
5
15
Product and Process Validation
14
17
18
11
10
Production
13
19F
12
Feedback Assessment and Corrective Action
19I
18
Packaging Specications
Production Part Approval
Interim
19I
Production Part Approval
Final
19F
Bidding and
Nomination
Plan and Dene

Program
Product Design and

Development
Process Design and

Development
Product and Process

Validation
Plan
Do
Check
Act
Feedback Assessment
and Corrective Action
Figure 5: Product Development Life Cycle

A typical new product development lifecycle and the way PPAP is interlinked is depicted.
Why PPAP while First Article Inspection Reviews (FAIR) happen today?
FAI is widely the standard applied across all parts of

Aerospace industry. (Refer to 9102 - International
Aerospace Standard, 9103 - Variation Managements of
Key Characteristics)
The purpose of the First Article Inspection is to provide
objective evidence, based on an assessment of the first
production article, that all engineering, design and
specification requirements are correctly understood,
accounted for, recorded, verified and complied with. The
purpose of this standard is to provide a consistent
documentation requirement for Aerospace
components FAI.
Sl. No.
1
2
3
4
5
6
7
8
9
9a
9b
9c
9d
10
11
12
13
14
15
16
PPAP v/s FAI Importance

1. Drives a consistent documentation requirement for
aerospace components
2. PPAP affirms process readiness for mass
production
3. Emphasizes on risk identification and mitigation
prior to flag-off of mass production
FAI
Document List (SCMH Section 7.2 APQP, Revision Letter: A,
*
Requirement
Revision Date: 01-APR-2014, Page 81 of 88)
Purchase Order
Authorized Engineering Change Documents
Customer Engineering Approval
Design Failure Mode and Eect Analysis (Ref. 2.01)
Process Flow diagram (Ref. 1.07 & 3.01)
Process Failure Mode and Eect Analysis (Ref. 3.05)
Control Plan (Ref. 3.07 & 4.05)
Measurement System Analysis Studies (Ref. 3.08 & 4.02)
First Article Inspection
o Design Records (Output of Phase 2)
o Dimensional Results
o Records of Material/Performance Tests
o Qualied Laboratory Documentation
Preliminary Process Capability Study
Appearance Approval Report
Sample Production Parts
Master Sample
Checking Aids
Customer Specic Requirements
Part Submission Warrant (PSW)
OEM Quality
$
Systems
Aerospace
PPAP
Requirement
$
Few Aero OEM's had updated their process to be better than the FAI requirement, even before Aero PPAP
requirement called for
* 7.2.7 : APQP Phase 4 Checklist -December 2013 (xlsx) - Checklist 4.08
Figure 6: PPAP v/s FAI Requirement

First Article Inspection is a complete, independent, and
documented physical and functional inspection process
to verify that prescribed production processes have
produced an acceptable item as specified by
engineering drawings, engineering specifications,
and / or other applicable design documents
However, FAI alone will not be sufficient to ensure:

Production Readiness
Initial Process Capability
Major process risks identified and resolved prior to
rate production
Challenges in Applying PPAP Elements in the Aerospace Industry
The dawn of PPAP happened in the Automotive industry

where, volumes are high and life cycle of parts is shorter,
contrary to Aerospace.
The challenges in implementing PPAP in Aerospace
industry are categorised as:
Process / Framework:
Lot size during product launch is typically less than
30 making the Statistical Process Control study
challenging
Non- availability / incomplete DFMEA due to lack of
integration of PPAP elements in NPD process
Capability:
Lack of knowledge in methodology and importance of
various elements of PPAP as it is relatively new to the
Aerospace industry
Cost:
Inadequate infrastructure
Cost associated with PPAP documentation not in
contractual agreement
Shortage of resources to implement the standard
Addressing the Challenges
Process / Framework:
The requirement of minimum batch quantity to assess
the process capability and approve a PPAP is
trimmed down in Aerospace. For some of the
products, full PPAP approval could take like 1-2 years
until which time an interim PPAP approval is provided.
This could be for the reason of getting a minimum
quantity of 25 parts to assess process capability and
stability
Design / Process Failure Mode Effect Analysis
(D/PFMEA) are two of the most powerful tools /
attributes of APQP / PPAP process. Recently the
Aerospace industry has identified these as vital tools
for the future success of its business sectors and as
the only way to ensure full compliance to their
customer expectations. Their preferred use is in
tandem having both a Design FMEA (DFMEA) and
Process FMEA (PFMEA) within the APQP / PPAP
process. The DFMEA is an important input to PFMEA;
defining the Critical to Quality (CTQ) features /
characteristics of the design. Having said that, we can
still generate a PFMEA even though a DFMEA is not
available, provided as an input we have, a Critical
Characteristics and / or Significant Characteristics
Matrix, a definition of the product and a Process Flow
Diagram. The Critical Characteristics and / or

Significant Characteristics Matrix is generated at the
design phase, often as an additional document for
classified or proprietary design the OEM does not
share the (DFMEA) with their supply base.
Additionally, it is important to have all available quality
history of part / product (this includes history from
similar design and similar / same significant process
steps defined in the Process Flow). In summary,
whilst, DFMEAs is developed to circumvent the failure
of product, PFMEAs are produced to curtail the
probability of producing the product wrong
Capability:
One way to address the challenge of capability gap
and which is a potential solution - is using a mixed
capability team. Outlined below is a recommended
structure PPAP knowledge, which includes from
basic proficiency to expert level. By breaking the tasks
and aligning certain elements of tasks below, the need
for number of experts and people to implement PPAP
are reduced.
Capability:
Figure 7: Structured Team with Mixed Capability

In addition, OEMs can accelerate PPAP
implementation by engaging with Engineering Service
Organisations (ESO) like QuEST who are good in
establishing and managing mixed capability teams.
OEMs can also engage ESOs to train their suppliers
on the PPAP requirements
Alternatively, resources from automotive domains can
be trained through structured training programs.
ESOs can also support this in a large scale by
providing services to execute the task as such
Conclusion
The Aerospace vertical is characterized by rapid

technological advancements in engineering and a
diversified product outlook. Adapting end-to-end
engineering solutions such as APQP & PPAP to manage
and to improve QCD (Quality, Cost & Delivery) is no
more an expectation but a very basic need.
By adopting PPAP in Aerospace, companies do not
need to invest on extra resources and technology as
required for individual projects of different capacities
executed across the globe. Companies can also
concentrate on the broader scale of their business
interests.
Cost:
Effort & Cost associated with the amount of paper
work can be reduced by integrating PPAP submission
with current FAI submission and using industry tools
to manage the rest of the information collection and
compilation. In order for these tools to be effective, a
good capable and seasoned team is equally important
By engaging with global Engineering Services
Organisation (ESO) firms who can bring mixed
capability teams and delivery centres across the
globe, the total operating costs can be limited.
Working with ESO partner who has a global footprint
can also help reduce travel costs associated with
visiting suppliers
QuEST is in a very good position in terms of pedigree in

Aerospace and Aero-engines industry, demonstrated
ability to ramp up and build competent teams, with
strong governance and communication methods to
maximize productivity and long term value addition and
it continues to invest in building and developing teams
for long term relationship with customers.
QuEST integrated PPAP Solution is flexible and
scaleable. It addresses the challenges faced by
Aerospace OEMs whilst implementing PPAP. QuEST is
serving automotive customers as well as aerospace
customers on PPAP. With this QuEST is poised to serve
Aerospace OEMs / Customers / TIER-1s to implement
PPAP effectively.
Reference Material
i. https://www.aiag.org/staticcontent/press/files/History
Highlights.pdf | Accessed on12-Oct-2014
iv. http://en.wikipedia.org/wiki/First_article_inspection
| Accessed on12-Oct-2014
ii. http://www.sae.org/servlets/registration?PORTAL_
CODE=IAQG&OBJECT_PKG=iaqg.business
Classes&OBJECT_TYPE=SCMHGeneral&PAGE=
getSCMHBOOK&vgenNum=224&scmhs=2 |
Accessed on12-Oct-2014
v. Standard AS9100 Rev C - Quality Systems Aerospace - Model for Quality Assurance in Design,
Development, Production, Installation and Servicing
iii. http://www.aiac.ca/uploadedFiles/Resources_and_
Publications/Reference_Documents/AIAC%20Phase
%203%20Report_FINAL.pdf | Accessed on12-Oct2014
10
vi. Standard AS9102Rev A- Aerospace First Article

Inspection Requirement
vii.Standard AS9103, Issued 2001-10 - Variation
Management of Key Characteristics
Author Profile
Sheshadri Nagaraja Nittoor
Sheshadri Nagaraja Nittoor is based out of Bangalore, India in the

role of Technical Solution Leader (TSL) Supply Chain Services
(SCS) and is responsible for Developing SCS Strategy primarily for
Auto customers along with Aero-engines customers with a special
focus in the Asia Pacific region.
Sheshadri comes with an experience of just over 14 years; he has
been with QuEST for the past 8.5 years during which he was with the
QuEST-Aero Centre as Project Manager - Manufacturing
Engineering Services for 3 SCUs, he was also part of the Business
Excellence Team as Black Belt for 2 years.
Prior to joining QuEST, he worked in RAPSRI Engineering, Tyco
Electronics and for the automotive giant General Motors through a
service provider. Sheshadri has manufacturing knowledge coupled
with quality and project management knowledge. He is
also a certified Six-Sigma Green Belt.
Sheshadri holds a Bachelors degree in Industrial &
Production Engineering.
Email: [email protected]
About QuEST Global

QuEST Global is a focused global engineering solutions
provider with a proven track record of over 17 years
serving the product development & production
engineering needs of high technology companies. A
pioneer in global engineering services, QuEST is a
trusted, strategic and long term partner for many Fortune
500 companies in the Aero Engines, Aerospace &
Defence, Transportation, Oil & Gas, Power, Healthcare
and other high tech industries. The company offers
mechanical,
electrical,
electronics,
embedded,
engineering
software,
engineering
analytics,
manufacturing
engineering
and
supply
chain
transformative
solutions
across
the
complete
engineering lifecycle.
QuEST partners with customers to continuously create

value through customer-centric culture, continuous
improvement mind-set, as well as domain specific
engineering capability. Through its local-global model,
QuEST provides maximum value engineering
interactions locally, along with high quality deliveries at
optimal cost from global locations. The company
comprises of more than 7,000 passionate engineers of
nine different nationalities intent on making a positive
impact to the business of world class customers,
transforming the way they do engineering.
http://quest-global.com

Production Part Approval Process

Uploaded by

Copyright:

Available Formats

Production Part Approval Process

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Production Part Approval Process

Uploaded by

Copyright:

Available Formats

What is APQP and PPAP?

What is APQP and PPAP?

What are the benefits of PPAP?

What are the benefits of PPAP?

production

Sheshadri Nagaraja Nittoor

Background of APQP and PPAP Submissions

When is PPAP Approval / Re-approval Triggered?

Benefits of PPAP Submission & Sign Off

Challenges in Applying PPAP Elements in the Aerospace Industry

Addressing the Challenges

About QuEST Global

2015, QuEST Global Services