Dme C14 PDF

DIPLOMA IN MECHANICAL ENGINEERING
SCHEME OF INSTRUCTIONS AND EXAMINATIONS

(FIRST YEAR)
Subject
Code
Instruction
period / week
Name of the Subject
Total
Period
/ year
Theory
Practical
/Tutorial
90
150
120
120
4
4
120
120
180
180
Scheme of Examination
Duration
(hours)
Sessional
Marks
End
Exam
Marks
Total
Marks
THEORY:
ME-101 English
Engineering
ME-102
Mathematics - I
ME-103 Engineering Physics
Engineering Chemistry
ME-104 &Environmental
Studies
ME-105 Engineering Mechanics
ME-106 Workshop Technology
PRACTICAL:
Engineering Drawing
ME-107
practice
Basic Work shop
ME-108
practice
109-A Engineering
Physics Lab practice
ME-109
109-B Engineering
Chemistry Lab practice
Computer
ME-110 fundamentals Lab
practice
TOTAL
90
90
24
18
1260
I -1
100
100
100
100
100
100
100
100
3
(1.5+1.5)
100
(50+50)
100
1000
Subject Title
Subject Code
Periods per Week
Periods per Year
:
:
:
:
ENGLISH
(Common to all Branches)
English
ME - 101
03
90
Time Schedule
Sl No
Major Topics
No. of
Periods
Weightage
of Marks
No of Short
Answers
No of Long
Answers
Vocabulary
13
Grammar
30
31
Reading
10
10
Writing
30
40
English in Action
15
16
90
110
10
08
Rationale and Scope

Globalization has ushered in an era of opportunities for those who have the necessary
competencies. Effective communication is one among them. This shift demands strengthening
of English in polytechnics. In C-14 Curriculum the focus is on the special English needs of
technician studies and training. This course aims at integration of the four fold language
abilities viz., listening, speaking, reading and writing. The use of English for learning technical
subjects and for performing technical functions like, writing repots, giving instructions and
interpreting graphics is of great importance. Therefore the curriculum C-14 focuses on
improving communicative abilities equipping the students to become industry- ready and
employable.
Upon completion of this course the student shall be able to
1.0
Build their vocabulary in the direction of their future needs
2.0
Learn various grammatical structures
3.0
Read and comprehend English and understand the details and draw inferences
4.0
Learn to be competent in various forms of written communication (writing composition
and data interpretation)
5.0
Practice spoken communication suited to various situations.
1.0
1.1
1.2
1.3
Extend their vocabulary in the direction of their future needs

Locate words, learn spellings, understand meanings
Pronounce words intelligibly
Find synonyms and antonyms
I -2
1.4
1.5
Use affixation
Comprehend meanings of words by understanding meanings of roots
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
2.14
2.15
2.16
2.17
2.18
Learn various grammatical structures

Identify and use nouns
Identify and use pronouns
Use the present tense
Use the past tense
Use the future tense
Identify and use adjectives
Identify and use adverbs
Use prepositions
Use linkers
State basic sentence structures
Construct different types of sentences
Frame questions to elicit information
Frame questions for conformation
Use active voice
Use passive voice
Use direct speech
Use indirect speech
Identify and correct errors
3.0
3.1
3.2
3.3
3.4
3.5
Read and comprehend English

Identify the main ideas
Identify the specific details
Draw inferences
Give contextual meanings of the words
Perceive tone in a text
4.0
Learn to excel in various forms of written communication (writing composition

and data interpretation)
Identify components of a good paragraph
Write types of paragraphs
Distinguish between formal and informal letters
Write personal letters
Write leave letters
Write official letters
Write letters of complaints
Prepare a resume
Write a cover letter
Write short messages
Report incidents
Report experiments
Report Industrial visits
Write work done statements
Write maintenance reports
Make notes using Cue method and Mapping method
Summarize Paragraphs
Present and Interpret Data from flow charts, tree diagrams, bar graphs, tables, pie
charts
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
4.11
4.12
4.13
4.14
4.15
4.16
4.17
4.18
I -3
5.0
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
Practice spoken communication suited to various situations.

Use appropriate expressions to greet and take leave
Use proper expressions to make requests
Use apt expressions for asking and giving directions
Use suitable expressions to seek and offer suggestions
Use suitable expressions to state intentions
Use suitable expressions to state feelings
Use appropriate expressions to state agreement and disagreement
Use proper expressions to make complaints
Use suitable expressions to express obligations
Course Material
The textbook prepared by the faculty of English of Polytechnics in AP.
Reference Books
1. Essential English Grammar (Intermediate Level)
Raymond Murphy
2. Learn English ( A Fun Book of Functional Language, Grammar and Vocabulary)
Santanu Sinha Chaudhuri
3. Grammar Builder ( Entire Series)
Oxford University Press
4. High School English Grammar ( Revised Edition)
Wren and Martin
5. Sentence skills with Readings ( fourth Edition, Tata McGraw Hill)
John Langan, Paul Langan
6. Word Power Made Easy
Norman Lewis
7. Spoken English
Shashi Kumar and Dhamija
I -4
ENGINEERING MATHEMATICS I
Subject Title
Subject Code
Periods per week
Periods per Semester
S. No
:
:
:
:
Engineering Mathematics-I
ME-102
04
60
Blue print
Major Topic
No of Periods
Unit - I : Algebra
Theory Practice
Weightage
of Marks
Short Type
Essay Type
U App
App
Logarithms
Partial Fractions
10
10
16
Matrices and
Determinants
Unit - II :
Trigonometry
Trigonometric
Ratios
Compound Angles
Multiple and
Submultiple angles
Transformations
1/2
1/2
1/2
8
9
10
11
12
Inverse
Trigonometric
Functions
Trigonometric
Equations
Properties and
solutions of
triangles
Hyperbolic
Functions
Complex Numbers
Unit III : Coordinate Geometry
13
Straight Lines
14
Circle
15
Conic Sections
10
I -5
S. No
Major Topic
No of Periods
Weightage
of Marks
Short Type
Essay Type
Unit IV : Differential Calculus

16
Limits and
Continuity
17
Differentiation
18
10
23
Unit - V : Applications of Differentiation

18
19
Geometrical
Applications
Physical
Applications
20
Maxima and Minima
21
Errors and
Approximations
92
58
110
2
1/2
21
20
25
35
Total
Marks
R:
U:
App:
Remembering type
Understanding type
Application type
41 marks
34 marks
35 marks
Objectives
Upon completion of the course the student shall be able to
UNIT I
Algebra
1.0
Use Logarithms in engineering calculations
1.1
Define logarithm and list its properties.
1.2
Distinguish natural logarithms and common logarithms.
1.3
Explain the meaning of e and exponential function.
1.4
State logarithm as a function and its graphical representation.
1.5
Use the logarithms in engineering calculations.
2.0
2.1
Resolve Rational Fraction into sum of Partial Fractions in engineering problems

Define the following fractions of polynomials:
1.
Rational,
2.
Proper and
3.
Improper
I -6
2.2
Explain the procedure of resolving rational fractions of the type mentioned below
into partial fractions
i)
iii )
3.0
f ( x)
( x a)( x b)( x c)
f ( x)
( x a )( x b)
2
ii )
f ( x)
( x a ) ( x b)( x c)
iv)
f ( x)
( x a )( x 2 b) 2
Use Matrices for solving engineering problems
3.1
Define a matrix and order of a matrix.
3.2
State various types of matrices with examples (emphasis on 3rd order square
matrices).
3.3
Compute sum, scalar multiplication and product of matrices.
3.4
Illustrate the properties of these operations such as associative, distributive,

commutative properties with examples and counter examples.
3.5
Define the transpose of a matrix and write its properties.
3.6
Define symmetric and skew-symmetric matrices.
3.7
3.8
Resolve a square matrix into a sum of symmetric and skew- symmetric matrices
with examples in all cases.
Define minor, co-factor of an element of a 3x3 square matrix with examples.
3.9
Expand the determinant of a 3 x 3 matrix using Laplace expansion formula.
3.10
Distinguish singular and non-singular matrices.
3.11
Apply the properties of determinants to solve problems.
3.12
Solve system of 3 linear equations in 3 unknowns using Cramers rule.
3.13
Define multiplicative inverse of a matrix and list properties of adjoint and inverse.
3.14
Compute adjoint and multiplicative inverse of a square matrix.
3.15
Solve system of 3 linear equations in 3 unknowns by matrix inversion method
3.16
State elementary row operations.
3.17
Solve a system of 3 linear equations in 3 unknowns by Gauss- Jordan method
UNIT II
Trigonometry :
4.0
Understand Trigonometric Ratios
4.1
Define trigonometric ratios of any angle.
4.2
List the values of trigonometric ratios at specified values.
4.3
Draw graphs of trigonometric functions
4.4
Explain periodicity of trigonometric functions.

I -7
5.0
Solve simple problems on Compound Angles
5.1
Define compound angles and state the formulae of sin(AB), cos(AB), tan(AB)
and cot(AB)
5.2
Give simple examples on compound angles to derive the values of sin150, cos150 ,
sin750 , cos750 ,
tan 150 , tan750 etc.
5.3
Derive identities like sin(A+B) sin(A-B) = sin 2 A sin2 B etc.,
5.4
Solve simple problems on compound angles.
6.0
Solve problems using the formulae for Multiple and Sub- multiple Angles
6.1
Derive the formulae of multiple angles 2A, 3A etc and sub multiple angles A/2 in
terms of angle A of trigonometric functions.
6.2
Derive useful allied formulas like sinA= (1- cos2A)/2 etc.,
6.3
Solve simple problems using the above formulae
7.0
Apply Transformations for solving the problems in Trigonometry
7.1
Derive the formulae on transforming sum or difference of two trigonometric ratios in
to a product and vice versa- examples on these formulae.
7.2
Solve problems by applying these formulae to sum or difference or product of three
or more terms.
8.0
Use Inverse Trigonometric Functions for solving engineering problems
8.1
Explain the concept of the inverse of a trigonometric function by selecting an
appropriate domain and range.
8.2
Define inverses of six trigonometric functions along with their domains and ranges.
8.3
Derive relations between inverse trigonometric functions so that given A= sin-1x,

express angle A in terms of other inverse trigonometric functions - with examples.
8.4
State various properties of inverse trigonometric functions and identities like

sin-1x+cos-1 x =
etc.
1
8.5
Derive formulae like tan x tan y tan
8.6
Solve simple problems.

x y
1 xy
, where x 0, y 0, xy 1 etc.,
9.0
Solve Trigonometric Equations in engineering applications
9.1
Explain what is meant by solutions of trigonometric equations and find the general
solutions of sin x=k, cos x =k and tan x=k with appropriate examples.
9.2
Solve models of the type a sin2 x + b sin x +c=0, a cos x + b sin x=c etc., and
problems using simple transformations.
I -8
10.0 Appreciate Properties of triangles and their solutions

10.1
State sine rule, cosine rule, tangent rule and projection rule.
10.2
Explain the formulae for sin A/2, cos A/2, tan A/2 and cot A/2 in terms of semiperimeter and sides a, b, c and solve problems.
10.3
List various formulae for the area of a triangle.
10.4
Solve problems using the above formulae.
10.5
Solve a triangle when (i) three sides, (ii) two sides and an included angle, (iii) two
sides and an opposite angle-case of two solutions and (iv) one side and two
angles are given.
11.0
Represent the Hyperbolic Functions in terms of logarithm functions
11.1
Define Sinh x, cosh x and tanh x and list the hyperbolic identities.
11.2
Represent inverse hyperbolic functions in terms of logarithms.
12.0 Represent Complex numbers in various forms

12.1 Define complex number, its modulus , conjugate and list their properties.
12.2
Define the operations on complex numbers with examples.
12.3
Define amplitude of a complex number
12.4
Represent the complex number in various forms like modulus-amplitude (polar)

form, Exponential (Euler) form illustrate with examples.
State DeMoivres theorem and its applications to complex numbers e.g., finding the
roots, powers, simplifications of a complex number with illustrative examples
12.5
UNIT - III
Coordinate Geometry
13.0 Solve the problems on Straight lines
13.1 Write the different forms of a straight line point slope form, two point form,
intercept form, normal form and general form
13.2 Solve simple problems on the above forms
13.3
Find distance of a point from a line, acute angle between two lines, intersection of
two non-parallel lines and distance between two parallel lines.
14.0 Solve the problems on Circles

14.1 Define locus of a point circle and its equation.
14.2
Find the equation of a circle given

(i)
Center and radius
(ii)
Two ends of a diameter
(iii)
Centre and a point on the circumference
(iv)
Three non collinear points

I -9
(v)
Centre and tangent
14.3
Write the general equation of a circle and find the centre and radius.
14.4
Write the equation of tangent and normal at a point on the circle.
14.5
Solve the problems to find the equations of tangent and normal.
15.0
Appreciate the properties of Conics in engineering applications
15.1
Define a conic section.
15.2
Explain the terms focus, directrix, eccentricity, axes and latus rectum of a conic with
illustrations.
15.3
Find the equation of a conic when focus, directrix and eccentricity are given
15.4
Describe the properties of Parabola, Ellipse and Hyperbola
15.5
Solve engineering problems in simple cases of Parabola and Ellipse.
UNIT - IV
Differential Calculus
16.0 Use the concepts of Limit and Continuity for solving the problems
16.1 Explain the concept of limit and meaning of lim f ( x) l and state the properties of
xa
limits .
16.2
Mention the Standard limits
ex 1
lim
,
x0
x
lim (1
x 0
1
x) x
xn an
,
xa x a
lim
sin x
,
x0 x
lim
tan x
,
x0 x
lim
a x 1
,
x0
x
lim
1
lim 1 (All without proof).
x
x
16.3
Solve the problems using the above standard limits
16.4
Evaluate the limits of the type lim
16.5
Explain the concept of continuity of a function at a point and on an interval with

some examples whether a given function is continuous or not.
f ( x)
a x2 b x c
and lim
2
x g ( x)
x l x x
17.0 Appreciate Differentiation and its meaning in engineering situations

17.1 State the concept of derivative of a function y = f(x) definition, first principle as
lim
h0
f ( x h) f ( x) and also provide standard notations to denote the derivative

h
of a function.
17.2
State the significance of derivative in scientific and engineering applications.

I -10
17.3
Find the derivatives of elementary functions like xn , ax, ex, log x, sin x, cos x, tanx,
Secx, Cosecx and Cot x using the first principles.
17.4
Find the derivatives of simple functions from the first principle .
17.5
State the rules of differentiation of sum, difference, scalar multiplication, product and
quotient of functions with illustrative and simple examples.
Explain the method of differentiation of a function of a function (Chain rule) with
illustrative examples such as
17.6
(i)
17.7
17.8
17.9
t2
2
t
2
(ii) x sin 2 x
(iii)
x
x2 1
(iv) log sin(cos x) .
Find the derivatives of Inverse Trigonometric functions and examples using the
Trigonometric transformations.
Explain the method of differentiation of a function with respect to another function
and also differentiation of parametric functions with examples.
Find the derivatives of hyperbolic functions.
17.10 Explain the procedures for finding the derivatives of implicit function with examples.
17.11 Explain the need of taking logarithms for differentiating some functions with
examples like [f(x)]g(x).
17.12 Explain the concept of finding the higher order derivatives of second and third order
with examples.
17.13 Explain the concept of functions of several variables, partial derivatives and
difference between the ordinary and partial derivatives with simple examples.
17.14 Explain the definition of Homogenous function of degree n
17.15 Explain Eulers theorem for homogeneous functions with applications to simple
problems.
UNIT - V
Applications of the Differentiation
18.0 Understand the Geometrical Applications of Derivatives
18.1 State the geometrical meaning of the derivative as the slope of the tangent to the
curve y=f(x) at any point on the curve.
18.2
18.3
Explain the concept of derivative to find the slope of tangent and to find the equation
of tangent and normal to the curve y=f(x) at any point on it.
Find the lengths of tangent, normal, sub-tangent and sub normal at any point on the
curve y=f(x) .
18.4
Explain the concept of angle between two curves and procedure for finding the
angle between two given curves with illustrative examples.
I -11
19.0
Understand the Physical Applications of Derivatives
19.1
19.2
Explain the derivative as a rate of change in distance-time relations to find the

velocity and acceleration of a moving particle with examples.
Explain the derivative as a rate measurer in the problems where the quantities like
volumes, areas vary with respect to time- illustrative examples.
20.0 Use Derivatives to find extreme values of functions

20.1 Define the concept of increasing and decreasing functions.
20.2
Explain the conditions to find points where the given function is increasing or
decreasing with illustrative examples.
20.3 Explain the procedure to find the extreme values (maxima or minima) of a function
of single variable - simple problems yielding maxima and minima.
20.4 Solve problems on maxima and minima in applications like finding areas, volumes,
etc.
21.0 Use Derivatives to find Errors and Approximations

21.1 Find the absolute error, approximate error, relative error and percentage error in
functions of single variable.
COURSE CONTENT
Unit-I
Algebra
1. Logarithms :
Definition of logarithm and its properties, natural and common logarithms; the meaning of e
and exponential function, logarithm as a function and its graphical representation.
2. Partial Fractions :
Rational, proper and improper fractions of polynomials. Resolving rational fractions in to
their partial fractions covering the types mentioned below:
i)
iii )
f ( x)
( x a)( x b)( x c)
f ( x)
( x a )( x b)
2
ii )
f ( x)
( x a ) ( x b)( x c)
iv)
f ( x)
( x a )( x 2 b) 2
Matrices:
3. Definition of matrix, types of matrices-examples, algebra of matrices-equality of two
matrices, sum, scalar
multiplication and product of matrices. Transpose of a matrix-
Symmetric, skew symmetric matrices-Minor, cofactor of an element-Determinant of a

I -12
square matrix-Laplaces expansion, properties of determinants. Singular and non singular

matrices-Adjoint and multiplicative inverse of a square matrix- examples-System of linear
equations in 3 variables-Solutions by Cramerss rule, Matrix inversion method-examplesElementary row operations on matrices -Gauss-Jordan method to solve a system of
equations.
Unit-II
Trigonometry:
4.Trigonometric ratios: definition of trigonometric ratios of any angle, values of trigonometric
ratios at specified values, draw graphs of trigonometric functions, periodicity of
trigonometric functions.
5. Compound angles: Formulas of sin(AB), cos(AB), tan(AB),cot(AB),and related
identities with problems.
6. Multiple and sub multiple angles: trigonometric ratios of multiple angles 2A,3A and
submultiple angle A/2 with problems.
7. Transformations of products into sums or differences and vice versa simple problems
8. Inverse trigonometric functions : definition, domains and ranges-basic propertiesproblems.
9. Trigonometric equations: concept of a solution, principal value and general solution of
trigonometric equations :
sin x =k , cos x= k, tan x =k.
Solutions of simple quadratic equations, equations involving usage of transformationsproblems.
10. Properties and solutions of triangles: relation between sides and angles of a triangle- sine
rule, cosine rule, tangent rule and projection rule-area of a triangle- solving a triangleproblems.
11. Hyperbolic functions: Definitions of hyperbolic functions, identities of hyperbolic functions,
inverse hyperbolic functions and expression of inverse hyperbolic functions in terms of
logarithms.
12. Complex Numbers : Definition of a complex number, Modulus and conjugate of a complex
number, Arithmetic operations on complex numbers, Modulus- Amplitude (polar) form,
Exponential form(Euler) form of a complex number- Problems. DeMoivres Theorem and
its applications in complex numbers- Simple problems.
I -13
UNIT-III
Coordinate geometry
13. Straight lines: various forms of straight lines, angle between lines, perpendicular distance
from a point, distance between parallel lines-examples.
14. Circle: locus of appoint, Circle, definition-Circle equation given (i) center and radius, (ii)
two ends of a diameter (iii) centre and a point on the circumference (iv) three non
collinear points and (v) centre and tangent equation - general equation of a circle finding center, radius: tangent, normal to circle at a point on it.
15. Definition of a conic section, equation of a conic when focus directrix and eccentricity are
given. Properties of parabola, ellipse and hyperbola, standard forms - applications of
parabola and ellipse to engineering situations.
UNIT-IV
Differential Calculus
16. Concept of Limit- Definition- Properties of Limits and Standard Limits -Simple ProblemsContinuity of a function at a point- Simple Examples only.
17. Concept of derivative- definition (first principle)- different notations-derivatives of
elementary functions - problems.
Derivatives of sum, product, quotient, scalar
multiplication of functions - problems. Chain rule, derivatives of inverse trigonometric

functions, derivative of a function with respect to another function, derivative of parametric
functions, derivative of hyperbolic, implicit functions, logarthmic differentiation problems
in each case. Higher order derivatives - examples functions of several variables
partial differentiation, Eulers theorem-simple problems.
UNIT-V
Applications of Derivatives:
18. Geometrical meaning of the derivative, equations of Tangent and normal to a curve at any
point. Lengths of tangent, normal, subtangent and subnormal to the curve at any point .
Angle between the curves - problems.
19. Physical applications of the derivative velocity, acceleration, derivative as a rate
Measure Problems.
I -14
20. Applications of the derivative to find the extreme values Increasing and decreasing
functions, finding the maxima and minima of simple functions - problems leading to
applications of maxima and minima.
21. Applications of derivative in finding errors and approximations of functions and simple
problems.
Reference Books :
1. A text book of matrices by Shanti Narayan,
2.
Plane Trigonometry, by S.L Loney
3.
Co-ordinate Geometry, by S.L Loney
4.
Thomas Calculus, Pearson Addison-Wesley publishers
5.
Calculus I, by Shanti Narayan and Manicavachgam Pillai, S.V Publications
I -15
ENGINEERING PHYSICS
Subject Title
Subject Code
Periods per week
Total periods per year
S.No
:
:
:
:
Major Topics
Engineering Physics
ME -103
04
120
TIME SCHEDULE
No. of
Weightage of
Periods
Marks
Short
Answer Type
Essay Type
1.
Units and Dimensions
08
03
2.
Elements of Vectors
12
13
3.
Kinematics
12
13
4.
Friction
08
10
5.
Work, Power and Energy
10
10
6.
Simple Harmonic Motion
12
13
7.
Heat & Thermodynamics
12
13
8.
Sound
12
13
9.
Properties of matter
10
06
14
13
10
03
120
103
10
10. Electricity & magnetism

11. Modern Physics
Total:
OBJECTIVES
1.0
Understand the concept of Units and dimensions

1.1
Explain the concept of Units
1.2
Define t h e t e r m s
a ) Physical quantity, b ) F u n d a m e n t a l physical quantities and
c ) D erived physical quantities
1.3
Define unit
1.4
Define fundamental units and derived units
1.5
State SI units with symbols
1.6
State Multiples and submultiples in SI system
1.7
State Rules of writing S.I. units
1.8
State advantages of SI units
1.9
Define Dimensions
1.10 W r i t e Dimensional formulae
1.11 Derive dimensional formulae of physical quantities
1.12 List dimensional constants and dimensionless quantities
1.13 State the principle of Homogeneity of Dimensions
1.14 State the applications of Dimensional analysis
I -16
1.15
State the limitations of dimensional analysis
2.0
Understand the concept of Elements of Vectors

2.1 Explain the concept of Vectors
2.2 Define Scalar and Vector quantities
2.3 Give examples for scalar and vector quantities
2.4 Represent vectors graphically
2.5 Classify the Vectors
2.6 Resolve the vectors
2.7 Determine the Resultant of a vector by component method
2.8 Represent a vector in space using unit vectors (I, j, k)
2.9 State triangle law of addition of vectors
2.10 State parallelogram law of addition of vectors
2.11 Illustrate parallelogram law of vectors in case of flying bird and sling.
2.12 Derive expression for magnitude and direction of resultant of two vectors
2.13 State polygon law of addition of vectors
2.14 Explain subtraction of vectors
2.15 Define Dot product of two vectors with examples (Work done, Power)
2.16 Mention the properties of Dot product
2.17 Define Cross products of two vectors with examples (Torque, Linear velocity)
2.18 Mention the properties of Cross product.
2.19 Solve t h e r e l a t e d n u m e r i c a l problems
3.0
Understand the concept of Kinematics

3.1 Recapitulate the equations of motion in a straight line
3.2 Define acceleration due to gravity
3.3 Derive expressions for
a) Maximum Height, b) time of ascent, c) time of descent, and d) time of
3.4 Derive height of a tower when a body projected vertically upwards from
the top of a tower.
3.5 Define projectile motion with examples
3.6 Explain Horizontal projection
3.7 Derive an expression for the path of a projectile in horizontal projection
3.8 Explain oblique projection
3.9 Derive an expression for the path of projectile in oblique projection
3.10 Derive formulae for
a)Horizontal Range, b)Maximum range of a projectile in oblique projection
4.0
Understand the concept of Friction

4.1 Define friction
4.2 Classify the types of friction
4.3 Explain the concept of Normal reaction
4.4 State the laws of friction
4.5 Define coefficients of friction
4.6 Explain the Angle of friction
4.7 Derive an expression for acceleration of a body on a rough horizontal surface
4.8 Derive an expression for the displacement and time taken to come to rest over
a rough horizontal surface
4.9 Define Angle of repose
4.10 Derive an expressions for acceleration of a body on a smooth inclined plane (up
I -17
and down)
4.11 Derive an expressions for acceleration of a body on a rough inclined plane
(up and down)
4.12 List the Advantages and Disadvantages of friction
4.13 Mention the methods of minimizing friction
5.0
Understand the concept of Work, Power, and Energy

5.1
Define work
5.2
State SI units and dimensional formula for work
5.3
Define power
5.4
State SI units and dimensional formula for power
5.5
Define energy
5.6
State SI units and dimensional formula for energy
5.7
Define potential energy
5.8
Derive the expression for Potential energy with examples
5.9
Define kinetic energy
5.10 Derive the expression for kinetic energy with examples
5.11 State the Work- Energy theorem
5.12 Explain the relation between Kinetic energy and momentum
5.13 State the law of conservation of energy
5.14 Verify the law of conversion of energy in the case of a freely falling body
6.0
Understand the concept of Simple harmonic motion

6.1 Define Simple harmonic motion
6.2 State the conditions of Simple harmonic motion
6.3 Give examples for Simple harmonic motion
6.4 Show that the tip of the projection of a body moving in circular path with uniform
speed is SHM
6.5 Derive expression for displacement
6.6 Derive expression for velocity
6.7 Derive expression for acceleration
6.8 Derive expression for Time period and frequency of S H M
6.9 Define phase of S H M
6.10 Derive expression for Time period of simple pendulum
6.11 State the laws of simple pendulum
6.12 State the laws of Seconds pendulum
7.0
Understand the concept of Heat and thermodynamics

7.1 Explain the concept of expansion of gases
7.2 Explain Boyle s law
7.3 State Charles law in terms of absolute temperature
7.4 Define absolute zero temperature
7.5 Explain absolute scale of temperature
7.6 Define ideal gas
7.7 Derive ideal gas equation
7.8 Define gas constant and Universal gas constant
7.9 Explain why universal gas constant is same for all gases
7.10 State SI unit of universal gas constant
I -18
7.11
7.12
7.13
7.14
7.15
7.16
7.17
7.18
7.19
7.20
Calculate the value of universal gas constant

State the gas equation in terms of density
Distinguish between r and R
Explain Isothermal process w i t h t h e h e l p o f P - V a n d T - d i a g r a m
Explain adiabatic process w i t h t h e h e l p o f P - V a n d T - d i a g r a m
Distinguish between isothermal and adiabatic process
State first and second laws of thermodynamics
Define specific heats & molar specific heats of a gas
Derive the relation Cp Cv = R
Solve t h e r e l a t e d n u m e r i c a l problems
8.0
Understand the concept of Sound

8.1 Define the term sound
8.2 Explain longitudinal and transverse wave motion
8.3 Distinguish between musical sound and noise
8.4 Explain noise pollution and state SI unit for noise
8.5 Explain causes of noise pollution
8.6 Explain effects of noise pollution
8.7 Explain methods of minimizing noise pollution
8.8 Explain the phenomenon of beats
8.9 List the applications of beats
8.10 Define Doppler effect
8.11 List the Applications of Doppler effect
8.12 Explain reverberation and reverberation time
8.13 Write Sabines formula
8.14 Explain echoes
8.15 State conditions of good auditorium
9.0
Understand the properties of matter

9.1 Define the term Elasticity
9.2 Define the terms stress and strain
9.3 S t a t e t h e u n i t s a n d d i m e n s i o n a l f o r m u l a e f o r s t r e s s a n d s t r a i n
9.4 State the Hookes law
9.5 Define the surface tension
9.6 Explain Surface tension with reference to molecular theory
9.7 Define angle of contact
9.8 Define the capillarity
9.9 Write the formula for surface tension based on capilarity
9.10 Explain the concept of Viscosity
9.11 Provide examples for surface tension and Viscosity
9.12 State Newtons formula for viscous force
9.13 Define co-efficient of viscosity
9.14 Explain the effect of temperature on viscosity of liquids and gases
9.15 State Poiseulles equation for Co-efficient of viscosity
10.0
Understand the concept of Electricity and Magnetism

10.1 Explain the concept of Electricity
10.2 State the Ohms law
I -19
10.3
10.4
10.5
10.6
10.7
10.8
10.9
10.10
10.11
10.12
10.13
10.14
10.15
10.16
10.17
10.18
11.0
E xplain the Ohms law

Define specific resistance, conductance and their units
State Kichoffs laws
Explain Kichoffs laws
Describe Wheatstones bridge with legible sketch
Derive expression for balancing condition of Wheatstones bridge
Describe Meter Bridge with legible sketch
Write the formula in Meter Bridge to determine specific resistance
Explain the concept of magnetism
State the Coulombs inverse square law of magnetism
Define magnetic field and magnetic lines of force
State the Magnetic induction field strength-units and dimensions
Derive Magnetic induction field strength at a point on the axial line
Describe the moment of couple on a bar magnet placed in a uniform magnetic field
Derive Magnetic induction field strength at a point on the equatorial line
Solve t h e r e l a t e d n u m e r i c a l problems
Understand the concept of Modern physics

11.1 Explain Photo-electric effect
11.2 Write Einsteins photoelectric equation
11.3 State laws of photoelectric effect
11.4 Explain the Working of photoelectric cell
11.5 List the Applications of photoelectric effect
11.6 Recapitulate refraction of light and its laws
11.7 Define critical angle
11.8 Explain the Total Internal Reflection
11.9 Explain the principle and working of Optical Fiber
11.10 Mention types of optical fibbers
11.11 List the applications of Optical Fiber
11.12 Define super conductor and superconductivity
11.13 List the examples of superconducting materials
11.14 List the applications of superconductors
COURSE CONTENT
1.
Units and Dimensions:
Introduction Physical quantity Fundamental and Derived quantities Fundamental
and Derived units- SI units Multiples and Sub multiples Rules for writing S.I. unitsAdvantages of SI units Dimensions and Dimensional formulae- Dimensional
constants and Dimensionless quantities- Principle of Homogeneity- Advantages
and limitations of Dimensional analysis- - Problems.
2.
Elements of Vectors:
Scalars and Vectors Types of vectors(Proper Vector, Null Vector, Unit Vector, Equal ,
Negative Vector, Like Vectors, Co-Initial Vectors, Co-planar Vectors and Position
Vector).Addition of vectors- Representation of vectors- Resolution of vectors Parallelogram, Triangle and Polygon laws of vectorsSubtraction of vectors- Dot and
Cross products of vectors-Problems
I -20
3.
Kinematics:
Introduction- Concept of acceleration due to gravity- Equations of motion for a freely
falling body and for a body thrown up vertically- Projectiles- Horizontal and Oblique
projections- Expressions for maximum height, time of flight, range - problems
4.
Friction:
Introduction to friction- Causes- Types of friction- Laws of friction- Angle of reposeAngle of friction Motion of a body over a horizontal surface- smooth inclined planerough inclined plane- Advantages and disadvantages of friction- Methods of reducing
friction Problems
5.
Work, Power and Energy:

Work, Power and Energy- Definitions and explanation- potential energy- kinetic
energy-Derivations of Potential and Kinetic energies-K.E and Momentum relation Work-Energy theorem- Law of Conservation of energy- Problems
6.
Simple Hormonic Motion:

Introduction- Conditions of SHM- Definition- Examples- Expressions for displacement,
velocity, acceleration, Time period, frequency and phase in SHM- Time period of a
simple pendulum- Laws of simple pendulum-seconds pendulum- Problems
7.
Heat and Thermodynamics:

Expansion of Gases- Boyles law- Absolute scale of temperature- Charles laws- Ideal
gas equation- Universal gas constant- Differences between r and R- Isothermal and
adiabatic processes- Laws of thermodynamics- Specific heats of a gas - Problems
8.
Sound:
Sound- Nature of sound- Types of wave motion - usical sound and noise- Noise
pollution Causes & effects- Methods of reducing noise pollution- Beats- Doppler
effect- Echo- Reverberation-Reverberation time-Sabine s formula-Condition of
good auditorium- Problems
9.
Properties of matter
Definition of Elasticity Definition of stress and strain -th e u n i t s a n d d i m e n s i o n a l
f o r m u l a e f o r s t r e s s a n d s t r a i n - T he Hookes law- Definition of surface tensionExplanation of Surface tension with reference to molecular theory - Definition of angle
of contact - Definition of capillarity -The formula for surface tension based on
capillarity - Explanation of concept of Viscosity - Examples for surface tension and
Viscosity - Newtons formula for viscous force- Definition of co-efficient of viscosityThe effect of temperature on viscosity of liquids and gases - Poiseulles equation for
Co-efficient of viscosity- Th e r e l a t e d n u m e r i c a l problems
10.
Electricity & Magnetism:

Ohms law and explanation- Specific resistance- Kirchoff s lawsWheatstones bridge- Coulombs inverse square law magnetic field- magnetic
lines of force-Magnetic induction field strength- magnetic induction field strength at a
point on the axial line - magnetic induction field strength at a point on the equatorial
line problems.
I -21
11.
Modern Physics;
Photoelectric effect Einsteins photoelectric equation-laws of photoelectric effect photoelectric cell Applications of photo electric effect- Total internal reflection- fiber
optics- -principle and working of an optical fiber-types of optical fibers - Applications
of optical fibers- concepts of superconductivity - applications
REFERENCE BOOKS
1. Intermediate physics Volume-I
2. Unified physics Volume 1,2,3 and 4
3. Text book of physics Volume I
4. Text book of applied physics
5. Fibre optics
Deepthi
Dr.S.L Guptha and Sanjeev Guptha
Resnick & Holiday
Dhanpath Roy
D.A Hill
Blue Print for setting question paper at different levels

S.No
Major Topics
No. of Weightage Short answer

Periods of Marks type
K
U
Essay type
A
1.
Units and Dimensions
08
03
2.
Elements of Vectors
12
13
3.
Kinematics
12
13
4.
Friction
08
10
5.
10
10
12
13
13
8.
Work, Power and

Energy
Simple Harmonic
Motion
Heat &
Thermodynamics
Sound
12
13
9.
Properties of Matter
10
06
14
13
10
03
120
110
2
2
6.
7.
10. Electricity &

magnetism
11. Modern Physics
Total:
12
I -22
0
5
0
1
ENGINEERING CHEMISTRY & ENVIRONMENTAL STUDIES

((Common to all Branches)
Subject Title
: Engineering Chemistry & Environmental Studies
Subject Code
: ME -104
: 120
Blue Print
S.No Major topic
No of
Weight Short type
Periods age of (3marks)
marks R
U
A
A. ENGINEERING CHEMISTRY
1
Fundamentals of
18
Chemistry
2
Solutions
10
3
Acids and bases
10
4
Principles of
10
Metallurgy
5
Electrochemistry 14
6
7
8
9
Corrosion
Water Technology
Polymers
Fuels
B. ENVIRONMENTAL
STUDIES
Total
Essay type (10

marks)
R
U
A
16
8
8
10
1
0
0
0
0
0
0
1
0
0
0
1
0
1/2
0
1/2
0
0
13
8
14
12
6
10
13
13
3
0
1
1
1
0
0
0
0
0
0
0
0
0
1
1
0
1
0
0
0
0
0
0
0
18
16
120
110
18
30
3
1/2
35
1
1/2
15
remarks
5 mark
5 mark
OBJECTIVES
A. ENGINEERING CHEMISTRY
1.0 Understand the concept of Atomic structure
1.1
Explain the fundamental particles of an atom like electron, proton and neutron etc.,
1.2
Explain the concept of atomic number and mass number
1.3
1.4
State the Postulates of Bohrs atomic theory and its limitations

Explain t h e c o n c e pt of Quantum numbers with examples
1.5
Explain 1 . Aufbaus principle, 2 . Hunds rule and 3 . Paulis exclusion principle with
respect to electron stability
1.6
Define Orbital in an atomic structure
1.7
Draw the shapes of s, p and d Orbitals in an atomic structure
1.8
Distinguish between Orbit and Orbital

I -23
1.9
Write the electronic configuration of elements up to atomic number 30
1.10 Explain the significance of chemical bonding

1.11 Explain the Postulates of Electronic theory of valance
1.12 Define t he f our t ypes of Chemical bonding viz.,Ionic, Covalent, Coordinate and
Metallic
1.13 Explain t he f our t ypes of Chemical bonding viz.,Ionic, Covalent, Coordinate and
Metallic
1.14 Explain bond formation in NaCl and MgO
1.15 List Properties of Ionic compounds
1.16 Explain bond formation in Hydrogen molecule, Oxygen molecule, and Nitrogen
molecule using Lewis dot method
1.17 List Properties of Covalent compounds
1.18 Explain Metallic bond with Electron sea model theory
1.18 Define the terms 1.Oxidation, 2.Reduction and 3.Oxidation number
1.19 Calculate the Oxidation Number
1.20 Differentiate between Oxidation Number and Valence
2.0
Calculate Molarity, Molality and Normality of given Solution
2.1
Define the terms 1. Solution, 2.Solute and 3.Solvent
2.2
Classify solutions based on physical state and solubility
2.3
Define mole
2.4
Explain, with examples, the Mole concept
2.5
Define the terms 1. Atomic weight, 2. Molecular weight and 3. Equivalent weight
2.6
Calculate Molecular weight and Equivalent weight of given Acids, Bases and Salts
2.7
Define 1.Molarity, 2. Molalty and 3.Normality of solutions
2.8
Explain with examples Normality
2.9
Solve Numerical problems on Mole, Molarity and Normality
3.0
Understand the concepts of Acids and bases
3.1
Explain Arrhenius theory of Acids and Bases
3.2
State the limitations of Arrhenius theory of Acids and Bases
3.3
Explain Bronsted Lowry theory of acids bases
3.4
State the limitations of Bronsted Lowry theory of acids bases
3.5
Explain Lewis theory of acids and bases
3.6
State the limitations Lewis theory of acids and bases
3.7
Explain the Ionic product of water
3.8
Define pH and explain Sorenson scale
3.9
Solve the Numerical problems on pH (Strong Acids and Bases)

I -24
3.10 Define buffer solution

3.11 G i ve t h e at l e a st t h r e e examples foe buffer solutions
3.12 State the applications of buffer solution
4. 0
Understand the Principles of Metallurgy
4.1
List at least eight Characteristics of Metals
4.2
Distinguish between Metals and Non Metals
4.3
Define the terms 1.Mineral, 2.Ore, 3. Gangue, 4. Flux and 5. Slag
4.4
Describe the methods of concentration of ore like 1.Hand picking,2. Levigation, and 3.
Froth
Floatation
4.5
Describe the methods involved in extraction of crude metal- Roasting, Calcination and
Smelting.
4.6
Explain the purification of Metals by Electrolytic Refining
4.7
Define an Alloy
4.8
4.9
Write the Composition o f t h e f o l l o w i n g a l l o y s :1.Brass, 2 . German silver,

and Nichrome
L i s t t h e uses of following Alloys: Brass, German silver, Nichrome
5.0
Understand the concepts of Electrochemistry
5.1
Define the terms1. conductor, 2. Insulator, 3.Electrolyte and 4.Non electrolyte
5.2
Distinguish between metallic conduction and Electrolytic conduction
5.3
Explain Arrhenius theory of electrolytic dissociation
5.4
Explain electrolysis by taking example fused NaCl
5.5
Explain Faradays laws of electrolysis
5.6
Define 1 . C hemical equivalent and 2 . E lectrochemical equivalent
5.7
Solve the Numerical problems based on Faradays laws of electrolysis
5.8
Define Galvanic cell
5.9
Explain the construction and working of Galvanic cell
5.10 Distinguish between electrolytic cell and galvanic cell

5.11 Explain the standard electrode potentials
5.12 Explain the electrochemical series and its significance
5.13 Explain the emf of a cell
5.14 Solve the numerical problems on emf of cell
6.0
Understand the concept of Corrosion
6.1
Define t h e t e r m corrosion
6.2
Explain the Factors influencing the rate of corrosion
6.3
Explain the concept of electrochemical theory of corrosion
6.4
Describe the formation of a) composition cells, b) stress cells c) concentration cells

I -25
6.5
Explain the mechanism of rusting of iron
6.6
Explain the methods of prevention of corrosion: a) Protective coatings

b) Cathodic pr ot ect ion (Sacrificial anode process and Impressed voltage process)
7. 0
Understand the concept of Water Technology
7.1
State the various Sources of water like Surface and sub surface sources
7.2
Define the terms soft water and hard water with respect to soap consumption
7.3
Define the term of hardness o f w a t e r
7.4
E x p l a i n t h e v a r i o u s t y p e s o f h a r d n e s s o f w a t e r l i k e temporary and
permanent hardness; and c a r b o n a t e a n d b i c a r b o n a t e h a r d n e s s o f
water.
7.5
7.6
L i s t t h e u s u a l compounds causing hardness (with Formulae)

State the disadvantages of using hard water in industries
7.7
Define Degree of hardness, units of hardness (mg/L)
7.8
Explain the methods of softening of hard water: a) Ion-Exchange process,

b)Reverse osmosis process(RO)
7.9
List the advantages of RO
7.10 State t hr ee essential qualities of drinking water like

1).Safety, 2). Economy and 3)..Aesthetic
8.0
Understand the concepts of Polymers
8.1
Explain the concept of polymerisation
8.2
Describe the methods of polymerisation a) addition polymerisation of Ethylene b)

condensation polymerisation of phenol and formaldehyde (Only flow chart i.e. without
chemical equations)
8.3
Define the term plastic
8.4
Classify the plastics with examples
8.5
Distinguish between thermo and thermosetting plastics
8.6
List the Characteristics of plastics
8.7
State the advantages of plastics over traditional materials
8.8
State the disadvantages of using plastics.
8.9
Explain the methods of preparation of the following plastics:

1. Polythene, 2. PVC, 3.Teflon, 4. Polystyrene and 5. Urea formaldehyde
8.9
Explain the uses of the following plastics:

1. Polythene, 2. PVC, 3.Teflon, 4. Polystyrene and 5. Urea formaldehyde
8.10 Define the term natural rubber

8.11 State the structural formula of Natural rubber
8.12 Explain the processing of Natural rubber from latex
8.13 List the Characteristics of natural rubber
I -26
8.14 Explain the process of Vulcanization

8.15 List the Characteristics of Vulcanized rubber
8.16 Define the term Elastomer
8.17 Describe the preparation of the following synthetic rubbers a) Butyl rubber, b)
Buna-s and c) Neoprene rubber
8.18 List the uses of the following synthetic rubbers a) Butyl rubber, b) Buna-s and c)
Neoprene rubber
9.0
Understand the concepts of Fuels
9.1
Define the term fuel
9.2
Classify the fuels based on physical state solid, liquid and gaseous fuels,
9.3
9.4
Classify the fuels based on occurrence- primary and secondary fuels

List the characteristics of good fuel
9.5
State the composition and uses of gaseous fuels:

a) water gas, b) producer gas, c) natural gas, d) coal gas, e) Bio gas and f)
acetylene
B.
ENVIRONMENTAL STUDIES
1.1
Define the term environment
1.2
1.3
Explain the scope and importance of environmental studies

Explain the following terms 1).Lithosphere, 2).Hydrosphere, 3).Atmosphere,
4).Biosphere, 5)Pollutant, 6).Pollution, 7).Contaminant receptor - sink, particulates,
dissolved oxygen, 8).Threshold limit value, 9).BOD, and 10).COD
1.4
Explain the growing energy needs
1.5
1.6
State the differences between renewable and non renewable energy sourcesalternative energy sources.
Define an Ecosystem- biotic component, abiotic component and energy component,
1.7
Define t h e t e r m s :
1 ) . Producers, 2 ) . C onsumers and 3 ) . D ecomposers with examples.
1.8
1.9
Explain biodiversity and threats to biodiversity

Define air pollution
1.10 Classify the air pollutants- based on origin and state of matter
1.11 Explain the causes of air pollution
1.12 Explain the use and over exploitation of forest resources and deforestation
1.13 Explain the effects of air pollution on human beings, plants and animals
1.14 Explain the green house effect - ozone layer depletion and acid rain
1.15 Explain the methods of control of air pollution
1.16 Define water pollution
1.17 Explain the causes of water pollution
I -27
1.18 Explain the effects of water pollution on living and non living things
1.19 Understand the methods of control of water pollution.
COURSE CONTENT
A.
ENGINEERING CHEMISTRY
1.
Fundamentals of Chemistry
Atomic Structure: Introduction - Fundamental particles Bohrs theory Quantum
numbers - Aufbau principle - Hands rule - Paulis exclusion Principle- Orbitals, shapes
of s, p and d orbitals - Electronic configurations of elements
Chemical Bonding: Introduction types of chemical bonds Ionic and covalent bond
with examples Properties of Ionic and Covalent compounds
Metallic bond
2.
Oxidation-Reduction: Concepts of Oxidation-Reduction, Oxidation

calculations, differences between Oxidation Number and Valency
Solutions
Number-
3.
Introduction-concentration methods Mole concept, Molarity, Normality, Equivalent

weights, Numerical problems on Mole, Molarity and Normality
Acids and Bases
4.
Introduction theories of acids and bases and limitations Arrhenius theory-Bronsted

Lowry theory Lewis acid base theory Ionic product of water pH and related
numerical problems buffer solutions Applications.
Principles of Metallurgy
5.
Characteristics of Metals and distinctions between Metals and Non Metals, Metallurgy,
ore, Gangue, Flux, Slag - Concentration of Ore Hand picking, Levigation, Froth
floatation Methods of Extraction of crude Metal Roasting, Calcination, Smelting
Alloys Composition and uses of Brass, German silver and Nichrome
Electrochemistry
6.
Conductors, insulators, electrolytes - Arrhenius theory of electrolytic dissociation

electrolysis Faradays laws of electrolysis- numerical problems Galvanic cell
standard electrode potential electro chemical series emf and numerical problems
on emf of a cell
Water technology
Introduction soft and hard water causes of hardness types of hardness
disadvantages of hard water degree of hardness (ppm) softening methods
permutit process ion exchange process numerical problems related to degree of
hardness drinking water municipal treatment of water for drinking purpose
Osmosis, Reverse Osmosis - advantages of Reverse osmosis
7.
Corrosion
Introduction - factors influencing corrosion - electrochemical theory of corrosion composition, stress and concentration cells rusting of iron and its mechanism
prevention of corrosion by coating methods, cathodic protection
I -28
8.
Polymers
Introduction polymerization types of polymerization addition, condensation
with examples plastics types of plastics advantages of plastics over traditional
materials Disadvantages of using plastics preparation and uses of the following
plastics: 1. Polytehene 2. PVC 3. Teflon 4. Polystyrene 5. Urea formaldehyde
Rubber Natural rubber processing from latex Vulcanization Elastomers Butyl
rubber, Buna-s, Neoprene rubber and their uses.
9.
Fuels
Definition and classification of fuels characteristics of good fuel - composition and
uses of gaseous fuels.
B.
ENVIRONMENTAL STUDIES
Introduction environment scope and importance of environmental studies important
terms renewable and non renewable energy sources Concept of ecosystem,
producers, consumers and decomposers Biodiversity, definition and threats to
Biodiversity.
air pollution - causes-Effects forest resources : uses and over exploitation,
deforestation, acid rain, green house effect ozone depletion control of air pollution
Water pollution causes effects control measures,
REFERENCE BOOKS
1.
Intermediate chemistry Vol 1&2
Telugu Acedemy
2.
Vikram Publishers
3.
Vignan Publishers & Deepthi Publishers
4.
Jain & Jain
5.
O.P. Agarwal, Hi-Tech.
6.
Sharma
7.
A.K. De
I -29
ENGINEERING MECHANICS
Subject Title
Subject Code
Periods/Week
Periods per year
S No.
:
:
:
:
Major Topics
Statics
Friction
Engineering Mechanics
ME-105
04
120
TIME SCHEDULE
Weightage
No. of
of
Periods
Marks
22
21
Short
Answer
Questions
02
Essay
Type
Questions
1
18
16
02
01
22
18
01
28
26
02
02
Geometrical properties of
sections
Dynamics
Simple machines
20
21
02
Basic Link Mechanisms
10
120
08
110
01
10
08
Total
OBJECTIVES
1.0
Understand the concept of Statics

1.1
Explain the meaning of mechanics in engineering.
1.2
State the importance of mechanics in engineering.
1.3
Review the system of units used.
1.4
Explain the concept of force
1.5
List the types of forces
1.6
Explain the force system
a) Co-planar and Non-Coplanar,
b) Parallel and Non-Parallel,
c) Like and Un like, d) Concurrent and Non-concurrent
1.7
Explain the concept of equilibrium
1.8
State the parallelogram law of forces
1.9
State the triangle law of forces
1.10 State the polygon law of forces
1.11 State the Lamis theorem.
1.12 Explain the concept of free body diagram
1.13 Solve the problems involving concurrent coplanar forces
1.14 Solve simple problems involving non-concurrent coplanar forces
1.15 Solve simple problems using Lamis theorem
1.16 Define the term couple and moment of couple with legible sketch.
1.17 Explain the properties of a couple
1.18 State the condition of equilibrium of a body acted upon by co-planar
forces.
I -30
2.0
Understand the concept of Friction

2.1
Explain the concept of friction
2.2
State the laws of friction
2.3
Identify the machine members in which friction exists and desirable
2.4
Resolve the forces acting on bodies moving on horizontal plane.
2.5
Resolve the forces acting on bodies moving along the inclined planes.
2.6
Solve the related numerical problems
3.0
Understand the Geometric Properties of Sections

3.1
Define the terms Centre of Gravity, Centre of Mass and Centroid.
3.2
State the need for finding the Centroid and Centre of gravity for various
engineering applications
3.3
Locate the C.G. of a given section.
3.4
Explain the method of determining the Centroid by Method of moments
3.5
Determine the position of Centroid of standard sections-T, L, I, Channel
section, Z section, unsymmetrical I section
3.6
Determine the position of Centroid of built up sections consisting of RSJS
and flange plates and Plane figures having hollow portions
3.7
Explain the meaning of the term moment of Inertia.
3.8
Define the term polar moment of inertia
3.9
Explain the term radius of gyration
3.10 State the necessity of finding Moment of Inertia for various engineering
applications
3.11 Determine Moment of Inertia and Radius of gyration for regular geometrical
sections like T, L, I, Channel section, Z section, unsymmetrical I section
3.12 State Parallel axis theorem and perpendicular axis theorem
3.13 Determine MI of standard sections by applying parallel axes theorem
3.14 Determine MI of standard sections by applying parallel axes theorem
3.15 Calculate the moment of Inertia of composite sections.
3.16 Calculate radius of gyration of standard sections.
3.17 Determine the polar M.I for solid and hollow circular section applying
perpendicular axes theorem.
3.18 Solve the related numerical problems
4.0
Understand the concept of Dynamics

4.1
Define the terms Kinematics and Kinetics
4.2
Classify the motion types
4.3
Define the terms displacement, velocity and acceleration
4.4
State the Newtons Laws of motion (without derivation)
4.5
Solve the problems related to the rectilinear motion of a particle
4.6
Explain the Motion of projectile
4.7
Solve the numerical problems
4.8
State the DAlemberts principle
4.9
Define the Law of conservation of energy
4.10 Explain the Work-Energy principle
4.11 Define the Law of conservation of momentum
4.12 Explain the Impulse momentum equation
4.13 Solve the problems using the above principles
4.14 Explain the Rotary motion of particle
4.15 Define Centripetal force.
4.16 Define Centrifugal force.
I -31
5.0
6.0
4.17 Differentiate Centripetal and Centrifugal forces

4.18 Describe simple harmonic motion.
4.19 Explain the application of simple harmonic motion in engineering.
Comprehend the Principles involved in Simple Machines
5.1
Define the important terms of simple machines
a) Machine, b) Mechanical Advantage, c) Velocity Ratio, d) Efficiency.
5.2
Illustrate the use of three classes of simple lever.
5.3
Show that an inclined plane is a simple machine to reduce the effort in lifting
loads.
5.4
Derive expression for VR in cases of wheel & axle, Weston Differential pulley
blocks, pulleys, Worm & Worm wheel crabs, screw jack, rack & pinion.
5.5
Compute the efficiency of a given machine.
5.6
Compute effort required to raise or lower the load under given conditions.
5.7
Interpret the law of machine.
5.8
State the conditions for self-locking and reversibility.
5.9
Calculate effort lost in friction and load equivalent of friction.
5.10 Evaluate the conditions for maximum M.A.& Maximum efficiency.
Understand the concept of Basic Link mechanism
6.1
Define important terms of Basic link mechanism
a) Link, b) kinematics pair, c) Kinematic chain, d) Mechanism & machine
6.2
Explain kinematic pair and kinematic chain with the help of legible sketch
6.2
List examples for Lower and Higher pairs.
6.3
List examples of inversion.
COURSE CONTENT
1.0
Statics
1.1
The meaning of word mechanics.
1.2
Application of Mechanics to Engineering.
1.3
System of Units.
1.4
Definition and specification of force
1.5
System of forces
1.6
Resolution of force
1.7
Equilibrium and Equilibrant.
1.8
Statement of Parallelogram law of forces, triangle law of forces, polygon law of
forces and Lamis theorem
1.9
Drawing the free body diagram
1.10 Numerical problems related to concurrent coplanar forces
1.11 Couple and moment of a couple
1.12 Condition for equilibrium of a rigid body subjected to number of coplanar nonconcurrent forces.
1.13 Related Numerical problems
2.0
Friction
2.1
Definition of static friction, dynamic friction and impending friction
2.2
laws of solid and liquid friction
2.3
Derivation of limiting angle of friction and angle of repose
2.4
Resolution of Forces considering Friction when a body moves on horizontal
plane.
I -32
2.5
2.6
Resolution of Forces considering Friction when a body moves on

plane.
Numerical examples on the above cases
inclined
3.0
Geometric Properties of Sections

3.1
Definition and explanation of the terms Centre of Gravity, Centre of
Mass and centroid
3.2
Centroid of square, rectangle, triangle, semi-circle and trapezium
(formulae only without derivations)
3.3
Centre of gravity of composite sections by analytical method
`only (T-Section, L-Section I-section and channel section).
3.4
Moment of Inertia.
a) Definition and Explanation, b) Theorems of Moment of Inertia.
`i) Parallel axes theorem, ii) Perpendicular axes theorem.
c) Moment of Inertia for simple Geometrical Sections, Rectangular,
circular and triangular section and Radius of Gyration.
3.5
Calculation of Moment of Inertia and Radius of Gyration of
a) I Section, b) Channel Section, c) T Section.
d) L Section (Equal & unequal lengths), e) Z - section
f) Built up Sections (Simple cases only)
4.0
Dynamics
4.1
Defination of Kinematics and Kinetics
4.2
Classification of motion
4.3
Defination of displacement, velocity and acceleration
4.4
Laws of motion (without derivation)
4.5
Solving the problems related to the rectilinear motion of a particle
4.6
Motion of projectile and solving the numerical problems
4.7
Newtons laws of motion.
4.8
DAlemberts principle
4.9
Defination Law of conservation of energy
4.10 Work-Energy principle
4.11 Law of conservation of momentum
4.12 Impulse momentum equation
4.13 Solving the kinetic problems using the above principles
4.14 Rotary motion of particle and laws of motion
4.15 Definition and Differentiate Centripetal and Centrifugal forces.
4.16 Simple harmonic motion.
4.17 Definition of the terms frequency, time period, amplitude and circular frequency
4.18 SHM equation, natural frequency
4.19 Simple problems on SHM
5.0
Simple Machines
5.1
Definition of Simple machine, and uses of simple machine, levers
and inclined plane.
5.2
Fundamental terms like mechanical advantage, velocity ratio and efficiency.
5.3
Expressions for VR in case of Simple/Differential pulley/pulleys of 3 systems,
Worms and Worm wheel, Rack and pinion, Winch crabs, &Screw jack.
5.4
Conditions for reversibility and self locking.
5.5
Law of Simple Machine.
5.6
Effort lost in friction, Load Equivalent of Friction Max. M.A. and Max. efficiency.
I -33
6.0
Basic Link Mechanism

6.1
Definition of terms: link, kinematic pair, kinematic chain,
Mechanism, structure and machine.
6.2
Quadric cycle chain and its inversions.
6.3
Slider Crank chain and its inversion.
REFERENCE BOOKS:
1
2
3
4
5
6
Theory of Machines
by
by
by
by
by
by
Singer
B.S.Publications
Basudeb Bhattacharya Oxford Publishers
A Nelson
Mc Graw Hill Publishers
I.B.Prasad
R.S.Khurmi
S.Chand & Comp
S.S.Rathan
TMH P
I -34
WORKSHOP TECHNOLOGY
Subject Title
Subject Code
Periods per Week
Periods per Year
S.
No
1
:
:
:
:
Major Topics
Workshop Technology
ME-106
04
120
TIME SCHEDULE
Weightage
No. of
of
Periods
Marks
Short
Answer
Questions
Essay type
Questions
Basic Workshop tools &

operations
(1) Carpentry
20
16
(2) Fitting
25
26
(3) Forging
15
13
(4) Sheet metal
12
13
Drilling
10
13
Foundry
22
16
Mechanical working of
metals
Total
16
13
120
110
10
08
OBJECTIVES
1.0
Comprehend the use of Basic workshop tools and its operation

a. State the importance of workshop processes.
b. List the various workshop processes and explain briefly about each.
1.1
Carpentry
a. Identify various carpentry tools.
b. Distinguish between marking tools, measuring tools and cutting tools.
c. List work holding devices.
d. Explain wood working processes viz., sawing, chiselling and planning.
e. Explain the use of carpentry joints such as lap joint, dovetail
joint, mortise and tenon joint with legible sketch
f. Explain the working of wood working machines.
1.2
Fitting
a.
b.
c.
d.
e.
f.
List various fitting tools.

Distinguish between marking and measuring tools.
List cutting tools.
List various work holding devices.
List various checking and measuring instruments.
Explain fitting operations such as marking, sawing, chipping, filing,
grinding, drilling and tapping with legible sketch
I -35
1.3
Forging
a. List various tools used in black-smithy.
b. List equipment used in a forging shop.
c. Explain the important smithy operations
d. Explain the working principle of machine forging
e. Explain machine forgoing operations such as upsetting, drawing down
and punching with legible sketch
f. Explain the working principle of forging press with legible sketch.
g. List the forging defects
1.4
2.0
Sheet Metal
a. List various marking tools in sheet metal work
b. List various stakes
c. List various measuring tools used in sheet metal work
d. List various sheet metal joints.
e. Describe sheet metal operations such as shearing, bending
drawing and squeezing
f. Differentiate between riveting, soldering & brazing
.
Understand the concept of drilling
2.1 State the working principle of drilling.
2.2 List out different types of drilling machines.
2.3 Draw the line diagrams of the sensitive and radial drilling machines.
2.4 Identify the parts of these machines.
2.5 Describe the functions of each part.
2.6 Write the Specications of drilling machines.
2.7 Write the nomenclature of the drill bit.
2.8 Write the geometry of twist drill.
2.9 List the functions of twist drill elements.
2.10 List the different operations on drilling machine.
3.0
Understand the concept of Foundry

3.1 Acquaint with foundry as a manufacturing process.
3.2 State the advantages of casting over other process.
3.3 State the limitations of the process.
3.4 List the various hand moulding tools.
3.5 State the properties of good moulding sand.
3.6 State the types of moulding sands.
3.7 List the ingredients in foundry sand.
3.8 List the various types of patterns.
3.9 State the sequence of pattern making operations.
3.10 Identify the colour codes.
3.11 List the various moulding processes.
3.12 State the need and types of cores.
3.13 Describe the casting processes.
3.14 Identify the defects in casting.
3.15 Describe special casting processes.
4.0
Mechanical working of metals

4.1 Define mechanical working of metals.
4.2 Differentiate cold working with hot working.
I -36
4.3 Illustrate the working principle of hot rolling, piercing, spinning, extrusion and
drawing.
4.4 State advantages and limitations of hot working.
4.5 Identify various cold working processes such as rolling, bending and
squeezing.
4.6 State advantages and limitations of cold working.
COURSE CONTENT
1
Introduction
Methods of manufacturing processes - casting, forming, metal removal
processes, joining processes, surface finishing processes, basic
workshop processes - carpentry, fitting, hand forging, machine forging,
sheet metal work, cold and hot working of metals.
1.1
Carpentry
1.1.1
1.1.2
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
Marking & measuring tools: scales, rules, fourfold wooden rule,

flexible measuring rule (tape), straight edge, try square, bevel square,
combination square, marking knife, marking gauge, mortise gauge,
cutting gauge, wing compass, trammel, divider, outside calliper, inside
calliper, odd leg calliper, spirit level, plum bob, specifications- uses.
Cutting Tools
Saws: ripsaw, cross cut saw (hand saw), panel saw, tenon or
back saw, dovetail saw, bow saw, coping saw, compass saw,
pad or keyhole saw, specifications & uses.
Chisels: Firmer chisel, bevelled edge firmer chisel, parting
chisel, mortise chisel, inside and outside gauges, specifications
and uses.
Planes: Jack plane (wooden jack plane, metal jack plane),
rough plane, smoothing plane, rebate plane, plough plane,
router, spoke shave, special planes and their specifications
and uses.
Boring Tools:
Gimlet, braces- wheel brace, ratchet brace, bit-shell bit, twist bit
(auger bit), expansive bit, centre bit, router bit, countersink bit,
drill, reamer their specifications & uses.
Striking tools:
Hammers - Warrington hammer, claw hammer, mallet,
specifications &uses.
Holding devices
Bench vice, bench stop, bench hold fast, sash cramp (bar
cramp) G- cramp, Hand screw, specifications & uses.
Miscellaneous tools
Rasps and files, scraper, oilstone, glass paper, pincer, screw
driver, cabinet screw driver, ratchet-screw driver, saw set, oil
stone slip. specifications and uses.
Carpentry Processes
Marking, measuring, sawing,chiselling,planning,boring,grooving,
rebating & moulding.
Carpentry joints
Halving Joint, mortise and tenon joint, bridle joint, butt joint.
I -37
dowel joint, tongue & groove joint, screw & slot joint,
dovetail joint, corner joint.
1.1.7
1.2
Wood working machines

Wood working lathe (wood turning lathe), circular saw, band
saw, wood planer, sanding machine, belt sander, spindle
sander, disc sander and grinder, specifications and uses.
Fitting
1.2.1 Cutting tools
Chisels: Flat chisel, cross cut chisel, half round chisel, diamond point
chisel, side chisel, specifications and uses.
Files: Different parts of a file sizes and shapes - flat file, hand file,
square file ,piller file ,round file, triangular file, half round files, knife
edge file, needle file specifications and uses.
Scrapers: Flat, triangular, half round scrapers, specifications &
uses.
Saws: Hand hacksaw - solid frame, adjustable frame, specifications &
uses, hand hacksaw blades. Power hack saw description(horizontal
reciprocating type), power hacksaw blade, specifications and uses,
teeth set - saw material.
Drill bits: Flat drill, straight fluted drill, twist drill, parallel shank, tapered
shank, specifications & uses.
Reamer: Hand reamer, machine reamer, straight and spiral flutes
reamers, specifications and uses.
Taps: Hand taps - taper tap, plug tap and bottoming tap, specifications
and uses.
Dies & Sockets: Dies- solid, adjustable - specifications and
uses.
1.2.2 Striking Tools
Hammers: Parts, ball peen, cross peen, straight peen hammers, soft
hammer, sizes, specifications and uses.
1.2.3 Holding Devices
Vices: Bench vice, leg-vice, hand vice, pin vice, tool makers vice, pipe
vice, care of vices, specifications and uses.
1.2.4 Marking Tools
Surface plate, V-block, angle plate, try square, scriber, punch, prick
punch, centre punch, number punch, letter punch, specifications and
uses.
1.2.5
Miscellaneous Tools
Screw drivers, spanners, single ended & double ended, box type,
adjustable spanners, cutting pliers, nose pliers, allen keys,
specifications and uses.
1.2.6
Checking and measuring instruments

Checking instruments.
Callipers: Outside&Inside callipers, hermaphrodite (odd leg) calliper with
firm joint, spring callipers, transfer calliper sizes & uses, dividers - sizes
& uses.
I -38
Measuring instruments:
Combination square, bevel protractor, universal bevel protractor, sine
bar, universal surface gauge, engineers parallels, slip gauges, plane
gauge, feeler gauge, angle gauge, radius & template gauge, screw
pitch gauge, telescopic gauges, plate & wire gauge, ring and plug
gauges, snap gauges specifications & uses, vernier callipers, vernier
height gauge, vernier depth gauge, micrometer - outside & inside, stick
micrometer, depth micrometer, vernier micrometer, screw thread
micrometer specifications and uses.
1.2.7
1.3
Forging
1.3.1
1.3.2
1.3.3
1.3.4
1.3.5
1.4
Fitting Operations
Marking, sawing, chipping, filing, scrapping, grinding, drilling, reaming,
tapping and dieing.
Hand forging tools: Anvil, swage block, hand hammers - types; sledge
hammer, specifications and uses, tongs - types, specifications & uses,
chisel - hot & cold chisels specifications & uses. swages - types and
sizes, fullers, flatters, set hammer, punch and drift - sizes and uses.
Equipment: Open and closed hearth heating furnaces, hand and power
driven blowers, open and stock fire, fuels-charcoal, coal, oil gaseous
fuels.
Smith Operations: Upsetting, drawing down, setting down, punching,
drifting, bending, welding, cutting, swaging, fullering and flattering.
Machine Forging: Need of machine forging, forging hammers - spring
hammer, pneumatic hammer, drop hammer, forging press, hydraulic
press - line diagram, machine forging operations - drawing, upsetting,
punching, tools used in machine forging.
Forging defects: Types and remedies.
Sheet Metal Work

1.4.1 Metals used for sheet metal work.
1.4.2 Sheet metal hand tools:
Measuring tools - steel rule, circumference rule, thickness gauge,
sheet metal gauge, straight edge, scriber, divider, trammel points,
punches, chisels, hammers, snips or shears, straight snip, double
cutting shear, squaring shear, circular shear, bench & block shears.
Stakes: Double seaming stake, beak horn stake, bevel edged square
stake, Hatches stake, needle stake, blow Horn stake, hollow mandrel
stake, pliers (flat nose and round nose), grocers and rivet sets,
soldering iron, specifications & uses.
1.4.3 Sheet Metal Operations
Shearing: Cutting off, parting, blanking, punching, piercing,
notching, slitting, lancing, nibbling and trimming.
Bending: Single bend, double bend, straight flange, edge hem,
Embossing, beading, double hem or lock seam.
Drawing: Deep drawing, shallow or box drawing.
Squeezing: Sizing, coining, hobbing, ironing, riveting.
1.4.4 Sheet Metal Joints
I -39
1.4.5
Hem Joint: single hem, double hem & wired edge, seam joint -lap
seam, grooved seam, single seam, double seam, dovetail seam, burred
bottom seam or flanged seam.
Fastening Methods
Rivetting, soldering, brazing & spot welding.
Drilling
2.1
Type of drilling machines: sensitive & radial and their constructional detail
and specifications.
2.2
Drill bits: Terminology - geometry of twist drill - functions of drill elements.
2.3
Operations: Drilling, reaming, boring, counter boring, counter sinking, tapping,
spot facing and trepanning.
Foundry.
3.1
Introduction: Development of foundry as a manufacturing process,
advantages and limitations of casting over other manufacturing processes.
3.2
Foundry equipment:
Hand moulding tools: shovel, riddle, rammers, trowels, slicks, lifter, strike off bar, spruepin bellow, swab, gate cutter, mallet, vent rod, draw spike, rapping
plate or lifting plate, pouring weight, gagger, clamps, spirit level, moulding
boxes, snap box & flash box.
3.3
Sands: Properties of moulding sand - porosity, flowability, collapsibility,
adhesiveness, cohesiveness and refractoriness.
3.4
Types of moulding sand : green sand, dry sand, loam sand, facing sand,
backing sand, parting sand, core sand, system sand their ingredients and uses.
3.5
Pattern making: Materials such as wood, cast Iron, aluminium, brass, plastics
their uses and relative advantages, classification of patterns such as solid (one
piece), two piece and three pieces, split patterns, gate patterns and shell
patterns, sequence in pattern making, pattern allowances and colour codes.
3.6
Cores: Need of cores, types of cores.
3.7
Casting: green sand and dry sand moulding, cement bonded moulding, shell
moulding, ceramic moulding, defects in castings and their remedies.
3.8
Special casting processes: (Principles and applications only) die casting hot
chamber and cold chamber, centrifugal casting, CO2 process, investment
casting
Mechanical working of metals

4.1
Introduction: Hot working and cold working
4.2
Hot working processes: rolling - types of rolling, two high mill, three high
mills, four high mills, piercing or seamless tubing, drawing or cupping, spinning,
extrusion - direct or forward extrusion, indirect or backward extrusion, tube
extrusion, Impact extrusion.
4.3
Effects of hot working of metals, advantages & limitations of hot working of
metals.
4.4
Cold working process:
Rolling, drawing - wire drawing, tube drawing, bending, roll forming, angle
bending, spinning, extrusion, squeezing, cold heading, thread rolling, peening.
4.5
Effects of cold working of metals, advantages & limitations of cold working.
I -40
REFERENCE BOOKS
1.
2.
Production Technology
Elementary Workshop Technology
by
by
3.
3.
Manufacturing Technology (Vol I )

Workshop Technology Vol I & II
by
by
I -41
Jain & Gupta (Khanna Publiahers)

Hazra Chowdary & Bhattacharya
(Media Promotors)
P N Rao (Mc Graw Hill)
Raghuvamshi
ENGINEERING DRAWING
Subject Title
Subject Code
Periods/Week
Periods Per Year
:
:
:
:
Engineering Drawing
ME107
06
180
1
2
3
4
5
6
7
8
9
10
11
Major Topics
Importance of
Engineering Drawing
Engineering Drawing
Instruments
Free hand lettering &
Numbering
Dimensioning
Practice
Geometrical
constructions
Projection of points,
Lines, Planes &
Solids
Auxiliary views
Sectional views
Orthographic
Projection
Pictorial drawing
Development of
surfaces
Total
No. of
Drawing
plates
TIME SCHEDULE
S.No
Periods
Weightage
of
Marks
Short
Answer
Questions
Essay type
Questions
--
01
01
05
06
01
09
03
21
15
03
21
10
01
01
06
27
5
10
1
-
01
33
10
01
30
10
01
21
10
14
180
80
04
06
01
The Course is aimed at developing basic graphic skills so as to enable them to use these
skills in preparation of engineering drawings, their reading and interpretation
Pre-Requisite: Clear visualization and sound pictorial intelligence
OBJECTIVES
Upon completion of the subject the student shall be able to
1.0
Understand the basic concepts of Engineering Drawing

1.1
State the importance of drawing as an engineering communication
medium
1.2
State the necessity of B.I.S. Code of practice for Engineering Drawing.
1.3
Explain the linkages between Engineering drawing and other subjects of
study in diploma course.
I -42
2.0
Use of Engineering Drawing Instruments

2.1
Select the correct instruments and draw lines of different orientation.
2.2
Select the correct instruments and draw small and large Circles.
2.3
Select the correct instruments for measuring distances on the drawing.
2.4
Use correct grade of pencil for different types of lines, thickness and
given function.
2.5
Select and use appropriate scales for a given application.
2.6
Identify different drawing sheet sizes as per I.S. and Standard Lay- outs.
2.7
Prepare Title block as per B.I.S. Specifications.
2.8
Identify the steps to be taken to keep the drawing clean and tidy.
Drawing Plate 1: (Having two exercises)

3.0
Write Free Hand Lettering and Numbers

3.1
Write titles using sloping lettering and numerals of 7mm, 10mm and 14mm
height
3.2
Write titles using vertical lettering and numerals of 7mm, 10mm and 14mm
height
3.3
Select suitable sizes of lettering for different layouts and applications
3.4
Practice the use of lettering stencils.
Drawing plate 2: (Having 5 to 6 exercises)

4.0
Understand Dimensioning Practice

4.1
Define Dimensioning.
4.2
State the need of dimensioning the drawing according to accepted
standard.
4.3
Identify notations of Dimensioning used in dimensioned drawing.
4.4
Identify the system of placement of dimensions in the given
dimensioned drawing.
4.5
Dimension a given drawing using standard notations and desired
system of dimensioning.
4.6
Dimension standard features applying necessary rules.
4.7
Arrange dimensions in a desired method given in a drawing.
4.8
Identify the departures if any made in the given dimensioned drawing
with reference to SP-46-1988, and dimension the same correctly.
Drawing Plate 3: (Having 08 to10 exercises)

5.0
Apply Principles of Geometric Constructions

5.1
Divide a given line into desired number of equal parts internally.
5.2
Draw tangent lines and arcs.
5.3
Use General method to construct any polygon.
5.4
Explain the importance of conics
5.5
Construct conics (ellipse, parabola and hyperbola) by general method
5.6
Construct ellipse by concentric circles method
5.7
Construct parabola by rectangle method
5.8
Construct rectangular hyperbola from the given data.
5.9
Construct involute from the given data.
5.10 Construct cycloid and helix from the given data.
5.11 State the applications of the above constructions in engineering practice.
I -43
Drawing Plate -4: Having problems up to construction of polygon

Drawing Plate -5: Having problems of construction of conics
Drawing Plate -6: Having problems of construction of involute, cycloid and helix
6.0
Apply Principles of Projection of points, lines, planes & solids

6.1
Visualize the objects
6.2
Explain the I-angle and III-angle projections
6.2
Practice the I-angle projections
6.3
Draw the projection of a point with respect to reference planes (HP&VP)
6.4
Draw the projections of straight lines with respect to two reference
Planes (up to lines parallel to one plane and inclined to other plane)
6.5
Draw the projections of planes (up to planes perpendicular to one plane and
inclined to other plane)
6.6
Draw the projections of solids (up to axis of solids parallel to one plane and
inclined to other plane)
Drawing Plate -7: Having problems up to projection of points and Lines (15 exercises)
Drawing Plate -8: Having problems of projection of planes (6 exercises)
Drawing Plate -9: Having problems of projection of solids (10 exercises)
7.0
Understand the need of auxiliary views

7.1 State the need of Auxiliary views for a given engineering drawing.
7.2 Draw the auxiliary views of a given engineering component
7.3 Differentiate between auxiliary view and apparent view
Drawing plate No.10: (Having 4 exercises)

8.0
Appreciate the need of Sectional Views

8.1 Explain the need to draw sectional views.
8.2 Select the section plane for a given component to reveal maximum
information.
8.3 Explain the positions of section plane with reference planes
8.4 Differentiate between true shape and apparent shape of section
8.5 Draw sectional views and true sections of regular solids discussed in 6.0
8.6 Apply principles of hatching.
Drawing Plate11: Having problems of section of solids (6 exercises)

9.0
Apply principles of orthographic projection

9.1 Explain the principles of orthographic projection with simple
sketches.
9.2 Draw the orthographic view of an object from its pictorial drawing.
9.3 Draw the minimum number of views needed to represent a given
object fully.
Drawing Plate 12 : (Having 10 to 12 exercises)
10.0
Prepare pictorial drawings

10.1 State the need of pictorial drawings.
10.2 Differentiate between isometric scale and true scale.
10.3 Prepare Isometric views for the given orthographic drawings.
Drawing plate 13: (Having 10 to 12 exercises)
I -44
11.0
Interpret Development of surfaces of different solids

11.1 State the need for preparing development drawing.
11.2 Prepare development of simple engineering objects (cubes, prisms, cylinders,
cones, pyramid) using parallel line and radial line method.
11.3 Prepare development of surface of engineering components like trays,
funnel, 900 elbow & rectangular duct.
Drawing plate No. 14: (Having 05 exercises)
S.No
1.
2.
3.
4.
Competencies and Key competencies to be achieved by the student

Major topic
Key Competency
Explain the linkages between Engineering
drawing and other subjects of study in
Importance of Engineering Drawing
Diploma course.
Engineering Drawing Instruments
Select the correct instruments to draw

various entities in different orientation
Write titles using sloping and vertical

lettering and numerals as per B.I.S (Bureau
of Indian standards)
Dimension a given drawing using standard

notations
and
desired
system
of
dimensioning
Construct ellipse, parabola, rectangular

hyperbola, involute, cycloid and helix from
the given data.
Draw the projection of a point, straight lines,

planes & solids with respect to reference
planes (HP& VP)
Draw the auxiliary views of a given
Engineering component
Differentiate between Auxiliary view and
apparent view
Differentiate between true shape and
apparent shape of section
Use conventional representation of
Engineering materials as per B.I.S. Code.
Apply principles of hatching.
Draw simple sections of regular solids
Draw the minimum number of views
needed to represent a given object fully.
Free hand lettering & Numbering
Dimensioning Practice
5.
Geometrical construction
6.
Projection of points, Lines, Planes &

Solids
7.
Auxiliary views
8.
Sectional views
9.
Orthographic Projection
10.
Pictorial drawing
11.
Development of surfaces
Differentiate between isometric scale and

true scale.
Draw the isometric views of given objects,.
Prepare development of Surface of
Engineering components like trays,
funnel, 900 elbow & rectangular duct.
I -45
COURSE CONTENT
NOTE
1.
2.
B.I.S Specification should invariably be followed in all the topics.

A-3 Size Drawing Sheets are to be used for all Drawing Practice
Exercises.
1.0
The importance of Engineering Drawing

Explanation of the scope and objectives of the subject of Engineering Drawing Its
importance as a graphic communication -Need for preparing drawing as per standards
SP-46 1988 Mention B.I.S - Role of drawing in -engineering education Link
between Engineering drawing and other subjects of study.
2.0
Engineering drawing Instruments

Classifications: Basic Tools, tools for drawing straight lines, tools for curved lines, tools
for measuring distances and special tools like mini drafter & drafting machine
Mentioning of names under each classification and their brief description -Scales:
Recommended scales reduced & enlarged -Lines: Types of lines, selection of line
thickness - Selection of Pencils -Sheet Sizes: A0, A1, A2, A3, A4, A5, Layout of
drawing sheets in respect of A0, A1, A3 sizes, Sizes of the Title block and its contents
- Care and maintenance of Drawing Sheet, Drawing plate:
Lay out of sheet as per SP-46-1988 to a suitable scale.
Simple Exercises on the use of Drawing Instruments. Importance of Title Block.
3.0
Free hand lettering & numbering

Importance of lettering Types of lettering -Guide Lines for Lettering
Practicing of letters & numbers of given sizes (7mm, 10mm and 14mm)
Advantages of single stroke or simple style of lettering - Use of lettering stencils
4.0
Dimensioning practice
Purpose of engineering Drawing, Need of B.I.S code in dimensioning -Shape
description of an Engineering object -Definition of Dimensioning size
description -Location of features, surface finish, fully dimensioned Drawing Notations or tools of dimensioning, dimension line extension line, leader line,
arrows, symbols, number and notes, rules to be observed in the use of above
tools -Placing dimensions: Aligned system and unidirectional system ( SP-461988)-Arrangement of dimensions Chain, parallel, combined progressive, and
dimensioning by co-ordinate methods-The rules for dimensioning standard,
features Circles (holes) arcs, angles, tapers, chamfers, and dimension of
narrow spaces.
5.0
Geometric Construction
Division of a line: to divide a straight line into given number of equal parts
internally examples in engineering application.
Construction of tangent lines: to draw tangent lines touching circles
internally and externally.
Construction of tangent arcs
i) To draw tangent arc of given radius to touch two lines inclined at given
angle (acute, right and obtuse angles).
ii)Tangent arc of given radius touching a circle or an arc and a given line.
iii)Tangent arcs of radius R, touching two given circles internally and externally.
I -46
Construction of polygon:construction of any regular polygon of given side length using

general method
Conical Curves: Explanation of Ellipse, Parabola, Hyperbola, as sections of a
double cone and a loci of a moving point, Eccentricity of above curves Their
Engg. application viz. Projectiles, reflectors, P-V Diagram of a
Hyperbolic process,
Construction of any conic section of given eccentricity by general method
Construction of ellipse by concentric circles method
Construction of parabola by rectangle method
Construction of rectangular hyperbola
General Curves: Involute, Cycloid and Helix, explanations as locus of a
moving point, their engineering application, viz, Gear tooth profile, screw
threads, springs etc. - their construction
6.0
Projection of points, lines and planes & solids

Projecting a point on two planes of projection -Projecting a point on three
planes of projection -Projection of straight line.
(a) Parallel to both the planes.
(b) Perpendicular to one of the planes.
(c) inclined to one plane and parallel to other planes
Projection of regular planes
(a) Plane perpendicular to HP and parallel to VP and vice versa.
(c) Plane perpendicular to HP and inclined to VP and vice versa.
Projection of regular solids
(a) Axis perpendicular to one of the planes
(b) Axis parallel to VP and inclined to HP and vice versa.
7.0
Auxiliary views
Need for drawing auxiliary views -Explanation of the basic principles of
drawing an auxiliary views explanation of reference plane and auxiliary plane Partial auxiliary view.
8.0
Sectional views
Need for drawing sectional views what is a sectional view - Location of cutting plane
Purpose of cutting plane line Selection of cutting plane to give maximum
information (vertical and offset planes) - Hatching Section of regular solids inclined
to one plane and parallel to other plane
9.0
Orthographic Projections
Meaning of orthographic projection -Using a viewing box and a model Number of
views obtained on the six faces of the box, - Legible sketches of only 3 views for
describing object -Concept of front view, top view, and side view sketching these views
for a number of engg objects - Explanation of first angle projection. Positioning of
three views in First angle projection - Projection of points as a means of locating the
corners of the surfaces of an object Use of miter line in drawing a third view when
other two views are given -Method of representing hidden lines -Selection of minimum
number of views to describe an object fully.
I -47
10.0
Pictorial Drawings
Brief description of different types of pictorial drawing viz., Isometric, oblique,
and perspective and their use - Isometric drawings: Iso axis, angle between
them, meaning of visual distortion in dimensions - Need for an isometric scale,
difference between Isometric scale, and ordinary scale difference between Isometric
view and Isometric projection - Isometric and non-Isometric lines -Isometric drawing of
common features like rectangles, circular - shapes, non-isometric lines - Use of box
and offset methods
11.0
Development of Surfaces
Need for preparing development of surface with reference to sheet metal work
-Concept of true length of a line with reference to its orthographic
projection when the line is (i) parallel to the plane of projection (ii) inclined to one
principal and parallel to the other -Development of simple solids like cubes, prisms,
cylinders, cones, pyramid (sketches only) -Types of development: Parallel line and
radial line development -Procedure of drawing development, drawings of trays,
funnels, 900 elbow pipes and rectangular ducts.
REFERENCE BOOKS
Engineering Graphics by P I Varghese ( McGraw-hill)
Engineering Drawing by Basant Agarwal & C.M Agarwal - ( McGraw-hill)
Engineering Drawing by N.D.Bhatt.
T.S.M. & S.S.M on Technical Drawing prepared by T.T.T.I., Madras.
SP-46-1998 Bureau of Indian Standards.
I -48
BASIC WORKSHOP PRACTICE

Subject Title
Subject Code
Periods/Week
Periods Per Year
:
:
:
:
Workshop Practice
ME -108
06
180
TIME SCHEDULE
S.No
Major Title
No of
Periods
36
1.
Fitting shop
2.
Forging shop
39
3.
Carpentry shop
51
4.
Sheet metal work
51
Test
03
Total
180
OBJECTIVES
Practice the required operations in Fitting Shop
Practice the required operations in Forging Shop
Practice the required operations in Carpentry Shop
Practice the required operations in Sheet metal Shop
I -49
Competencies and Key competencies to be achieved by the student.

Title of the Job
Competencies
Fitting shop
1.Marking and Chipping on
Mild steel flat of
12 mm thick (12)
2.Cutting with hack saw of

MS flats of 6mm thick (06)
3.Drilling, chamfering and on

a MS flat of 2 mm thick (06)
Identify
appropriate
measuring tool
Handle
appropriate
marking tool
Handle
appropriate
chipping tool
Mark the dimensions
Remove the material by
chipping from MS flats
Check the raw material
for size
Fix the work piece in
vice
Mark the work as per
given dimensions
Perform dot punching
Load and unload hack
saw blade from its
frame
Use the hack saw to
perform
cutting
operation
for size
Apply the chalk on the
surface and on all sides
of the flat
Layout the dimensions
and mark the lines using
dot punch
Chamfer the edges
through filing
Locate the hole centres
using odd leg callipers
and centre punching
Identify appropriate drill
bit
Load and unload drill bit
from the machine
I -50
Key Competencies
Mark the dimensions

Remove the material by chipping
from MS flats
Load and unload hack saw blade

from its frame
cut the work as per marked
dimensions using Hack saw
Load and unload drill bit from the

machine
Identify appropriate taps
Tap the hole
4.Tapping and Dieing on a

MS flat of 2 mm thick (06)
5.Assembling of two pieces,

matching by filing (06)

for size
Identify appropriate tap
and die
Secure the tap in the
wrench
Tap the hole
Hold the bar in bench
vice
Fix the die in die stock
Cut external threads
using a Die
Check the fit for
accuracy
Cut the pieces to size
using hack saw
File surface of flat for
trueness
Mark the surfaces as
per dimensions
Dot punch the marked
lines
Cut with hack saw as
per marked lines
Smoot the surfaces
with file
Assemble
the
two
pieces
I -51
Secure the tap in the wrench

Tap the hole
Fix the die in die stock
Cut external threads using a Die
Identify appropriate file

File the specimen
Assemble two pieces
Title of the Job
Competencies
Forging shop
6.Conversion of Round to
Square (09)
7.Conversion of Round to
Hexagon (09)
8.Preparation of a Chisel
from round rod (09)
9.Preparation of a ring and

hook from M.S round (06)
10.Preparation of a
hexagonal bolt and nut (06)
Identify the holding and

striking tools
Heat the specimen to
the
appropriate
temperature
Remove the specimen
and hold it on the anvil
Hammer the specimen
to the required shape
striking tools
the
appropriate
temperature
Remove the specimen
Hammer the specimen
striking tools
the
appropriate
temperature
Remove the specimen
Hammer the specimen
striking tools
the
appropriate
temperature
Remove the specimen
Hammer the specimen
striking tools
the
appropriate
temperature
Remove the specimen
Hammer the specimen
I -52
Key Competencies
Heat the specimen to the

appropriate temperature
Hammer the specimen to the
required shape

required shape

required shape

required shape

required shape
Title of the Job
Competencies
Carpentry Shop
11.Cutting of wood with hand
saw (06)
12.Planning of wood(06)
Identify the orientation

of grains
Select appropriate saw
for cutting in each of the
directions viz. across
and along the grains
Select appropriate work
holding device
Handle
appropriate
measuring and marking
tools(Steel rule, Try
square, Marking gauge)
Mark dimensions on
work using Marking
gauge
Fix the work in the vice
Perform cutting along
the grains using Rip
saw
Change the position of
work in the vice
Perform
cutting
perpendicular the grains
using cross cut saw
Identify the direction for
planning wood stock
Select appropriate jack
plane
Prepare the jack plane
for planning
(Load and unload the
blade of a jack plane
holding device
Perform marking on
work using appropriate
tool
Plane the surfaces on
all four sides using jack
plane
I -53
Key Competencies
Identify the orientation of grains

Mark dimensions on work using
marking gauge
Perform
cutting
along
and
perpendicular the grains using
appropriate saw
Identify the direction for planning

wood stock
Prepare the jack plane for
planning
Plane the surfaces on all four
sides using jack plane
Title of the Job
Competencies
Contd.,,,
13.Chiselling of wood (06)
14.Preparation of a Dove
tail joint (09)
15.Preparation of Mortise
and Tenon joint (09)
Select
appropriate
chisels and saw
holding device
Select
appropriate
measuring and marking
tools
Mark the position of
grooves on work using
marking gauge
Cut sides of grooves by
hand saw
Chip the material using
firmer chisel by applying
pressure with mallet
Finish the grooves with
rasp file
Select the appropriate
cutting tools and work
holding devices
Plane
the
wooden
pieces on all sides
Mark at an angle of 750
with bevel square
Trim the dovetail by
chisel to exact size
Cutt the dovetail groove
on second piece
Finish the groove
Assemble
the
two
pieces
to
prepare
dovetail halving joint by
using mallet
Select the appropriate
cutting tools and work
holding devices
Plane the two pieces to
the required size using
jack plane
Mark the dimensions to
make
Tenon
using
mortise gauge
Cut tenon with tenon
saw along the marked
lines
I -54
Key Competencies
Select appropriate chisels and

saw
Mark the position of grooves
on work using marking gauge
Cut sides of grooves by hand
saw
Chip the material using firmer
chisel by applying pressure
with mallet
Trim the dovetail by chisel to

exact size
Mark at an angle of 750 with
bevel square
Cutt the dovetail groove on
second piece
Assemble the two pieces to
prepare dovetail halving joint
by using mallet
Mark the dimensions to make

Tenon and mortise on two
pieces using mortise gauge
Cut tenon with tenon saw
along the marked lines
Title of the Job
Competencies
Contd.,,,
Preparation of Mortise and
Tenon joint
16.Wood turning on lathe

(06)
Use firmer chisel to

remove
the
excess
material to set finished
tenon
Mark the dimension to
make mortise on the
second
piece
with
mortise gauge
Use mortise chisel to
provide recess in the
second
piece
to
accommodate tenon
Assemble
the
two
pieces by fitting the
tenon into mortise
Select appropriate tools
Plane the four corners
of the work piece using
jack plane
Mark the centres of the
work on either side
Mount
the
work
between head stock &
tailstock centres
Fix the tool in the tool
post & Position it in
appropriate height
Start the lathe to make
the work piece to
revolve
at
desired
speed
Feed the bevel gauge
against the rotating
work to get the required
size and shape
Use outside callipers to
check the diameter of
the pin
Use parting off tool to
reduce the diameter on
either ends of the pin
Remove the rolling pin
between centres and
cut off excess material
on either sides
I -55
Key Competencies
Use mortise chisel to provide

recess in the second piece to
accommodate tenon
Assemble the two pieces by
fitting the tenon into mortise
Mark the centres of the work

on either side
Fix the tool in the tool post &
Position it in appropriate height
Start the lathe to make the
work piece to revolve at
desired speed
Feed the bevel gauge against
the rotating work to get the
required size and shape
Title of the Job
Competencies
Contd.,,,
17.Preparation of any
household article (ex: stool)
(09)
19.Formation of joints like

grooved joint, locked groove
joint (06)
Competencies
Title of the Job
Sheet metal Work

18.Practice on cutting of
sheet (06)
Prepare the drawings of

a stool required for a
particular drawing table
State the specifications
of the wood stock
required
Identify the type of joints
to be made
Identify the operations
to be made and their
sequence
Perform operations to
produce pieces of joint
Assemble all joints as
per the drawing
Key Competencies
Cutt the required sheet

from the stock using
snip
Mark the dimensions
on the sheet using
scriber & steel rule
Draw
the
circular
shapes using divider
Perform rough cutting
of the curved shapes
using chisel and finish
cutting using snips
Cut the straight edges
using straight snips
Cut the sheet in to two
halves
Form the flange on the
sheet by folding the
sheet along scribed
lines using mallet &
stakes
Perform bending edges
of
sheets
applying
moderate
pressure
using mallet
Inter lock the bent
edges
and
apply
pressure with mallet to
make required joint
I -56
Prepare the drawings of a

stool required for a particular
drawing table
Identify the operations to be
made and their sequence
Perform operations to produce
pieces of joint
Assemble all joints as per the
drawing
Key Competency
Identify the marking and

cutting tools
Cut the sheet of different
shapes using appropriate tools

cutting tools
Cut the sheet
Perform bending along the
marked lines.
Title of the Job
20.Preparation of a
rectangular open type tray
(09)
21.Preparation of hollow
cylinder (06)
Competencies
Draw the development
of the object to be
made
Place the pattern on
the sheet
Mark the dimensions
using scriber
Shear the required
piece from the stock
Mark the lines on the
sheet to form bends

Strengthen the sides of
sheet by singe hem
using hatchet stake
Form the sheet in to
desired shape using
stakes
Seam the corners by
inserting laps of the
adjacent sides with
single hem
of the object to be
made
Place the pattern on
the sheet
Mark the dimensions
using scriber
Shear the required
piece from the stock
Mark the lines on the
sheet to form bends
Strengthen the sides of
sheet by singe hem on
top & bottom side using
hatchet stake
Form the flat sheet into
cylindrical shape by
cylindrical stake and
apply pressure using
mallet
Prepare single hem on
to longitudinal sides in
opposite directions
Inter lock the sides and
apply pressure to make
a strong joint
I -57
Key Competency
Drawing development of objects

Cut the sheet
Seam the corners by inserting
laps of the adjacent sides with
single hem

cutting tools
Drawing
development
of
objects
Cut the sheet
Inter lock the sides and apply
pressure using mallet to make
a strong joint
Title of the Job
22.Preparation of pipe elbow

(09)
Competencies
of a cylindrical pipe
truncated at an angle of
450 on one side
Scribe the lines on the
sheet by placing the
pattern on it
Cutt the sheet over the
marked
dimensions
using curved snips
Hem the straight side of
the sheet and flange
the curved side
Fold the edges of
joining sides
Form the sheet into
cylindrical shape using
stakes
Seam the sides using
mallet
Repeat
the
similar
operation for making
the second pipe
Butt
the
treated
portions
of
the
cylindrical pipes at
rectangles
Seam the two pipes
Solder the joint to
make leak proof
I -58
Key Competency
Draw the development of a

cylindrical pipe truncated at an
angle of 450 on one side
Cutt the sheet over the
marked dimensions using
curved snips
Form the sheet into cylindrical
shape using stakes
Title of the Job
23.Preparation of funnel (09)
24.Preparation of utility
articles such as dust pan,
kerosene hand pump (06)
Competencies
of upper conical part
Place the pattern on the
sheet and cut to
required size
Hem the upper side of
the sheet
Flange out the bottom
side of the sheet
Fold the edges of the
joining sides
form the sheet into
conical shape using
appropriate stake and
mallet
Repeat
the
similar
operation for making
the bottom part
Seam the top conical
part and bottom conical
part to obtain required
funnel
of given dust pan
Scribe the lines on the
sheet and cut to
required size
Hem all the four sides
to strengthen the edges
Form the sheet into
designed shape using
suitable stakes and
mallet
Solder the corner lap
joints to make the
required dust pan
I -59
Key Competency
Draw the development of

upper and bottom conical parts
Place the pattern on the sheet
and cut to required size
form the sheet into conical
shape using appropriate stake
and mallet
Seam the top conical part and
bottom conical part to obtain
required funnel

cutting tools
Drawing
development
of
objects
Cut the sheet
Perform bending along the
marked lines and to form the
article
COURSE CONTENT
FITTING SHOP
1. Marking and chipping on Mild steel flat 12 mm thick.
2. Cutting with hack saw, M.S. Flats of 6 mm thick.
3. Marking, cutting, drilling, Chamfering and tapping on a M.S. Flat 12 mm thick.
4. Assembling of two pieces, Matching by filing (6 mm thick M.S. Plate)
FORGING SHOP
1. Conversion of round to square.
2. Conversion of round to Hexagon.
3. Preparation of chisel from round rod.
4. Preparation of ring and hook from M.S. round.
5. Preparation of a hexagonal bolt and nut.
CARPENTRY SHOP
1. Cutting of wood with hand saw.
2. Planning of wood.
3. Planning and chiseling of wood.
4. Orientation of wood grain.
5. Preparation of dovetail joint.
6. Mortise and tenon joint.
7. Wood turning on a lathe.
8. Preparation of one household article.
SHEET METAL WORK
1. Practice on cutting of sheet
2. Formation of joints like grooved joints, locked groove joint
3. Preparation of a rectangular open type tray
4. Preparation of hollow cylinder
5. Preparation of pipe elbow
6. Preparation of mug.
7. Preparation of funnel
8. Preparation of utility articles such as dustpan, kerosene hand pump.
REFERENCE BOOKS
1.
2.
Manufacturing Technology (Vol I )

Principles of Foundry Technology
by
by
I -60
P N Rao (Mc Graw Hill)

P L Jain (Mc Graw Hill)
Subject Title
Subject Code
Periods per week
ENGINEERING PHYSICS LAB PRACTICE

:
Engineering Physics Lab Practice
:
ME-109 A
:
03
:
45
TIME SCHEDULE
Name of the Experiment
S.No
No. of
Periods
2.
Hands on practice on Vernier Calipers

Hands on practice on Screw gauge
03
03
3.
Verification of Parallelogram law of forces and Triangle law of forces
03
4.
Simple pendulum
03
5.
Velocity of sound in air (Resonance method)
03
6.
Focal length and Focal power of convex lens (Separate & Combination)
03
7.
Refractive index of solid using traveling microscope
03
8.
Surface tension of liquid using traveling microscope
03
9.
Coefficient of viscosity by capillary method
03
1.
10. Boyles law verification

11. Meter bridge
12.
03
03
Mapping of magnet lines of force
03
Revision
06
Test
03
Total:
Objectives:
1.0
2.0
Practice the Vernier caliper to determine the volume of a cylinder and sphere
Practice the Screw gauge to determine thickness of a glass plate and cross section
of a wire
3.0 Verify the parallelogram law and Triangle law
4.0 Determine the value of acceleration due to gravity using Simple Pendulum
5.0 Determine the velocity of sound in air at room temperature
6.0 Determine the Focal length and focal power of convex lenses using U-V method
7.0 Determine the refractive index of a solid using travelling microscope
8.0 Determine the surface tension of a liquid using travelling microscope
9.0 Determine the viscosity of a liquid using capillary method
10.0 Verify the Boyles law employing a Quill tube
11.0 Determine the specific resistance of wire material using Meter Bridge
12.0 Practice the mapping of magnetic lines of force
I -61
45

Competencies
Key competencies
1. Hands on practice on Vernier

Calipers
2. Hands on practice on Screw gauge
Find the Least count

Fix the specimen in posit
Read the scales
Calculate thickness of
glass place and cross
section of wire
Fix suitable weights
Note the positions of
threads on drawing
sheet
Find the angle at
equilibrium point
Construct
parallelogram
Compare the
measured diagonal
Construct triangle
Find
thesimple
length of sides
Fix the
pendulum to the stand
Adjust the length of
pendulum
Find the time for
number of oscillations
Find the time period
Calculate the
acceleration due to
gravity
Draw l-T and l-T2 graph
Read the scales

Calculate thickness of
given glass plate
Calculate cross section
of wire
3. Verification of Parallelogram law of

forces and Triangle law of forces
4. Simple pendulum
5. Velocity of sound in air

Resonance method
Find the Least count

Fix the specimen in posit
Read the scales
Calculate the volume of
given object
Arrange the resonance

apparatus
Adjust the reservoir
level for booming sound
Find the first and
second resonanting
lengths
Calculate velocity of
sound
I -62
Read the scales

Calculate the volume
of given object
Find the angle at

equilibrium point
Constructing
parallelogram
Construct triangle
Compare the ratios of
force and length
Find the time for number

of oscillations
Find the time period
Calculate the
acceleration due to
gravity
Draw l-T and l-T2 graph
Adjust the reservoir

level
Find the first and
second resonanting
lengths
sound
sound at 00 C

6. Focal length and Focal power of
convex lens (Separate &
Combination)
7. Refractive index of solid using

traveling microscope
Competencies
8. Surface tension of liquid using

traveling microscope
9. Coefficient of viscosity by capillary

Method
Fix the object distance

Find the Image distance
Calculate the focal
length and power of
convex lens and
combination of convex
lenses
Draw
u-vleast
and 1/u
1/v
Find the
count
of
vernier on microscope
Place the graph paper
below microscope
Read the scale
Calculate the refractive
index of glass slab
Find the least count of
vernier on microscope
Focus the microscope
to the lower meniscus &
bent pin
Read the scale
Calculate height of
liquid rise
Calculate the surface
tension of water
Find the least count of
vernier
Fix the capillary tube to
aspiratory bottle
Find the mass of
collected water
Find the pressure head
Calculate rate of
volume of liquid
collected
Find the radius of
capillary tube
Calculate the viscosity
of water using capillary
method
I -63
Key competencies
Calculate the focal

length and power of
convex lens
Draw u-v and 1/u 1/v
graph
Read the scale

Calculate the refractive
index of glass slab
Read the scale

Calculate height of
liquid rise
Calculate the surface
tension of water
Find the pressure head

Calculate rate of
volume of liquid
collected
Find the radius of
capillary tube
Calculate the viscosity
of water

10. Boyles law verification
Competencies
11. Meter bridge
12. Mapping of magnet lines of

Force
Note the atmospheric

pressure
Fix the quill tube to
retort stand
Find the length of air
column
Find the pressure of
enclosed air
Find and compare the
calculated value P x l
Make the circuit
connections
Find the balancing
length
Calculate unknown
resistance
Find the radius of wire
Calculate the specific
resistance
Draw magnetic
meridian
Placed the bar
magnet in NN and
NS directions
Draw magnetic
lines of force
Locate the neutral
points along
equatorial and axial
lines
I -64
Key competencies
Find the length of air

column
Find the pressure of
enclosed air
Find the value P x l
Find the balancing

length
Calculate unknown
resistance
Calculate the specific
resistance
Draw magnetic lines of

force
Locate the neutral points
along equatorial and
axial lines
ENGINEERING CHEMISTRY LAB PRACTICE

Subject Title
:
Engineering Chemistry Lab Practice
Subject Code
:
ME -109 B
Periods per week
:
03
:
45
TIME SCHEDULE
S.No
No. of Periods
03
03
2.
Familiarization of methods for Volumetric analysis

Preparation of Std Na2 CO3 and making different diluted solution.
3.
Estimation of HCl solution using Std. Na2 CO3 solution
03
4.
Estimation of NaOH using Std. HCl solution
03
5.
Estimation of H 2 SO 4 using Std. NaOH solution
03
6.
Estimation of Mohrs Salt using Std. KMnO4
03
7.
Determination of acidity of water sample

Determination of alkalinity of water sample
03
1.
8.
03
Determination of total hardness of water using Std. EDTA

10. Estimation of Chlorides present in water sample
11. Estimation of Dissolved Oxygen (D.O) in water sample
03
12.
03
9.
Determination of pH using pH meter
13.
Determination of conductivity of water and adjusting ionic strength to

level.
14. required
Determination of turbidity of water
15. Estimation of total solids present in water sample
Total:
03
03
03
03
03
45
Objectives:
1.0
2.0
3.0
4.0
5.0
Practice volumetric measurements (using pipetts, measuring jars, volumetric flask,

burettes) and gravimetric measurements (using different types of balances), making
dilutions, etc.
Practice making standard solutions with pre weighted salts and to make desired
dilutions using appropriate techniques.
Conduct titrations adopting standard procedures and using Std. Na2 CO3 solution for
estimation of HCl
Conduct titrations adopting standard procedures and using Std. HCl solution for
estimation of NaOH
Conduct titrations adopting standard procedures and using Std. NaOH solution for
estimation of H 2 SO 4
I -65
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
15.0
Conduct titrations adopting standard procedures and using Std. KMnO4 solution for
estimation of Mohrs Salt
Conduct titrations adopting standard procedures to determine the acidity of given
samples of water (One ground water and one surface / tap water, and rain water if
available)
Conduct titrations adopting standard procedures to determine the alkalinity of given
samples of water (One ground water and one surface / tap water)
Conduct titrations adopting standard procedures to determine the total hardness of
given samples of water (One ground water and one surface / tap water) using Std.
EDTA solution
Conduct titrations adopting standard procedures to determine the chlorides present in
the given samples of water and wastewater (One ground water and one surface / tap
water)
Conduct the test using titrometric / electrometric method to determine Dissolved
Oxygen (D.O) in given water samples (One sample from closed container and one
from open container / tap water)
Conduct the test on given samples of water / solutions (like soft drinks, sewage, etc.) to
determine their pH using standard pH meter
Conduct the test on given samples of water / solutions
a)
To determine conductivity
b)
To adjust the ionic strength of the sample to the desired value
Conduct the test on given samples of solutions (coloured and non coloured) to
determine their turbidity in NTU
Conduct titrations adopting standard procedures to determine the total solids present in
given samples of water (One ground water and one surface / tap water)

Competencies
Familiarization of methods for

Volumetric analysis
Preparation of Std Na2 CO3

and making different diluted
solution
Key competencies
--
--
Weighting the salt to the

accuracy of .01 mg
Measuring the water with
volumetric flask, measuring
jar, volumetric pipette and
graduated pipette
Making appropriate dilutions
Weighting the salt to the

accuracy of .01 mg
Measuring the water with
volumetric flask, measuring
jar, volumetric pipette and
graduated pipette
Making appropriate dilutions
I -66
Competencies
Key competencies
Estimation of HCl solution

using Std. Na2 CO3 solution
Cleaning the glassware and
Estimation of NaOH using Std.
HCl solution
Estimation of H 2 SO 4 using Std.
NaOH solution
Estimation of Mohrs Salt

using Std. KMnO4
Determination of acidity of
water sample
Determination of alkalinity of
water sample
Determination of total
hardness of water using Std.
EDTA solution
rinsing with appropriate

solutions
Making standard solutions
Making standard solutions
Measuring accurately the
Measuring accurately the
standard solutions and titrants

Filling the burette with titrant
Fixing the burette to the stand
Effectively Controlling the flow
of the titrant
Identifying the end point
Making accurate observations
standard solutions and

titrants
Effectively Controlling the
flow of the titrant
Identifying the end point
Making accurate
observations
Calculating the results
Estimation of Chlorides
present in water sample
Estimation of Dissolved
Oxygen (D.O) in water
sample (By titration method)
Estimation of Dissolved Oxygen
(D.O) in water sample (By
electrometric method)
Determination of pH using pH
meter
Determination of conductivity of
water and adjusting ionic
strength to required level
Determination of turbidity of
water
Familiarize with
instrument
Choose appropriate
Mode / Unit
Prepare standard
solutions / buffers, etc.
Standardize the
instrument with
appropriate standard
solutions
Plot the standard curve
Make measurements
accurately
Follow Safety precautions
I -67
Prepare standard
solutions / buffers, etc.
Standardize the
instrument with
appropriate standard
solutions
Plot the standard curve
Make measurements
accurately
Estimation of total solids

present in water sample
Competencies
Measuring the accurate
volume and weight of
sample
Filtering and air drying
without losing any filtrate
Accurately weighing the
filter paper, crucible and
filtrate
Drying the crucible in an
oven
I -68
Key competencies
Measuring the accurate
volume and weight of
sample
Filtering and air drying
without losing any
filtrate
Accurately weighing the
filter paper, crucible and
filtrate
Subject Title
Subject Code
Periods/Week
Periods/Year
COMPUTER FUNDEMENTALS LAB PRACTICE

: Computer Fundamentals Laboratory Practice
: ME-110
: 03
: 90
List of Experiments:
S. No.
Major Topics
No. of sessions
each of 3 periods
duration
No. of
Periods
I.
Computer hardware Basics
01
03
II.
Windows Operating System
02
06
III.
MS Word
09
27
IV.
MS Excel
09
27
V.
MS PowerPoint
09
27
30
90
Total
Rationale: The knowledge of Computer usage has become a must for everyone, due to
widespread computer usage and related applications in all fields. This laboratory is designed
to give the students hands on practice of Windows Operating System and MS Office to enable
the students to use these skills in future courses.
I. Computer Hardware Basics (Not for end examination)
1. a).To Familiarize with Computer system and hardware connections
b).To start and Shut down Computer correctly
c). To check the software details of the computer
2. To check the hardware present in your computer
II. Windowss operating system (Not for end examination)
3. To Explore Windows Desktop
4. Working with Files and Folders
5. Windows Accessories: Calculator Notepad WordPad MS Paint
III. Practice with MS-WORD
6. To familiarize with Ribbon layout of MS Word
Home - Insert - Page layout References Review - View
7. To practice Word Processing Basics
I -69
8. To practice Formatting techniques

9. To insert a table of required number of rows and columns
10. To insert Objects, Clipart and Hyperlinks
11. To use Mail Merge feature of MS Word
12. To use Equations and symbols features
IV. Practice with MS-EXCEL

13. To familiarize with MS-EXCEL layout
14. To access and Enter data in the cells
15. To edit a spread sheet- Copy, Cut, Paste, and selecting Cells
16. To use built in functions and Formatting Data
17. To create Excel Functions, Filling Cells
18. To enter a Formula for automatic calculations
19. To practice Excel Graphs and Charts
20. To format a Worksheet in Excel, Page Setup and Print
V. Practice with MS-POWERPOINT
21. To familiarize with Ribbon layout features of PowerPoint 2007.
22. To create a simple PowerPoint Presentation
23. To set up a Master Slide in PowerPoint
24. To insert Text and Objects
25. To insert a Flow Charts
26. To insert a Table
27. To insert a Charts/Graphs
28. To insert video and audio
29. To practice Animating text and objects
30. To Review presentation
I -70
Competencies and Key Competencies to be achieved by the students

Exp
No.
1 (a).

To familiarize with Computer
system and hardware
connections
1 (b). To Start and Shut down

Computer correctly
1 (c).
To Explore Windows Desktop
2.
To check the software details of

the computer
3.
To check the hardware present in

your computer
4.
Working with Files and Folders
Competencies
Key Competencies
a. Identify the Parts of a Computer

system a). CPU b) Monitor c)
CD/DVD Drive d) Power Switch
e) Start Button f) Reset Button
b. Identify and connect various
peripherals
c. Identify and connect the cables
used with computer system
d.
Identify various ports on
CPU and connect Keyboard &
Mouse
a. Log in using the password
b. Start and shut down the
computer
c. Use Mouse and Key Board
Connect cables to external

hardware and operate the
computer
a. Familiarize with Start Menu,

Taskbar, Icons and Shortcuts
b. Access application programs
using Start menu, Task manager
c. Use Help support
a. Find the details of Operating
System being used
b. Find the details of Service
Pack installed
a. Access application
programs using Start menu
b. Use taskbar and Task
manager
a. Find the CPU name and clock

speed
b. Find the details of RAM and
Hard disk present
c. Access Device manager using
Control Panel and check the
status of devices like mouse and
key board
d. Use My Computer to check the
details of Hard drives and
partitions
e. Use the Taskbar
a.
Create
folders
and
organizing files in different
folders
b. Use copy / paste move
commands to organize files and
folders
a. Access device manager

and find the details
b. Type /Navigate the correct
path and Select icon
related to the details
required
I -71
a. Login and logout as per the

standard procedure
b. Operate mouse &Key
Board
Access the properties of

computer and find the
details
a. Create files and folders

Rename , arrange and
search for the required
folder/file
Exp
No.
Working with Files and Folders

Continued....
To use Windows Accessories:

5.
Calculator Notepad WordPad

MS Paint
Competencies
Key Competencies
c. Arrange icons name wise, size,

type, Modified
d. Search a file or folder and find
its path
e.
Create shortcut to files and
folders (in other folders) on
Desktop
f. Familiarize with the use of My
Documents
g. Familiarize with the use of
Recycle Bin
a.
Familiarize with the use of
Calculator
b. Access Calculator using Run
command
c. Create Text Files using Notepad
and WordPad and observe the
difference in file size
d. Use MS paint and create .jpeg,
.bmp files using MS Paint
a. Create/Open a document
b. Use Save and Save as features
c. Work on two documents
simultaneously
d. Choose correct Paper size and
Printing options
b. Restore deleted files from

Recycle bin
a. Use windows accessories

and select correct text
editor based on the
situation.
b. Use MS pain to create /Edit
pictures and save in the
required format.
6.
To familiarize with Ribbon layout

of MS word. Home Insertpage layout- References-ReviewView
7.
To practice Word Processing

Basics
a. Typing text
b. Keyboard usage
c. Use mouse (Left click / Right
click / Scroll)
d. Use Keyboard shortcuts
e. Use Find and Replace features
in MS- word
f. Use Undo and Redo Features
g. Use spell check to correct
Spellings and Grammar
a. Use key board and mouse

to enter/edit text in the
document.
b. Use shortcuts
c. Use spell check/ Grammar
features for auto
corrections.
8.
To practice Formatting
techniques
a.
b.
c.
d.
e.
f.
g.
h.
a. Format Text and

paragraphs and use
various text styles.
b. Use bullets and numbers to
create lists
c. Use Templates /Themes
d. Insert page numbers date,
headers and footers
Formatting Text
Formatting Paragraphs
Setting Tabs
Formatting Pages
The Styles of Word
Insert bullets and numbers
Themes and Templates
Insert page numbers, header
and footer
I -72
a. Create a Document and

name appropriately and
save
b. Set paper size and print
options
Exp
No.
Competencies
Key Competencies
9.
To insert a table of required

number of rows and columns
a. Edit the table by adding the

fields Deleting rows and
columns inserting sub table
marking borders. Merging and
splitting of cells in a Table
b. Changing the background colour
of the table
c. Use table design tools
d. Use auto fit fixed row/ column
height/length Even distribution
of rows / columns features
e. Convert Text to table and Table
to Text
f. Use Sort feature of the Table to
arrange data in
ascending/descending order
a. Insert table in the word

document and edit
b. Use sort option for
arranging data.
10.
To Insert objects, clipart and

Hyperlinks
a. Create a 2-page document.

&Insert hyperlinks and t
Bookmarks.
b. Create an organization chart
c. Practice examples like preparing
an Examination schedule notice
with a hyperlink to Exam
schedule table.
a. Insert hyperlinks
&Bookmarks
b. Create organization
charts/flow charts
11.
To Use Mail merge feature of MS

Word
a. Use mail merge to prepare

individually addressed letters
b. Use mail merge to print
envelopes.
Use Mail merge feature
12.
To use Equations and symbols

features.
Enter Mathematical symbols

and Equations in the word
document
13.
To Practice with MS-EXCEL
14.
To access and Enter data in the

cells
a. Explore various symbols

available in MS Word
b. Insert a symbol in the text
c. Insert mathematical equations in
the document
a. Open /create an MS Excel
spreadsheet and familiarize with
MS Excel 2007 layout like MS
office Buttonb. Use Quick Access Toolbar- Title
Bar- Ribbon-WorksheetsFormula Bar-Status Bar
a. Move Around a WorksheetsQuick access -Select Cells
b. Enter Data-Edit a Cell-Wrap
Text-Delete a Cell Entry-Save a
File-Close Excel
I -73
a. Familiarize with excel

layout and use
b. Use various features
available in toolbar
a. Access and select the

required cells by various
addressing methods
b. Enter data and edit
Exp
No.
Competencies
15.
To edit spread sheet Copy, Cut,

Paste, and selecting cells
Format the excel sheet
16.
To use built in functions and

Formatting Data
17.
To enter a Formula for automatic

calculations
a. Insert and Delete Columns and

Rows-Create Borders-Merge and
Center
b. Add Background Color-Change
the Font, Font Size, and Font
Color
c. Format text with Bold, Italicize,
and Underline-Work with Long
Text-Change a Column's Width
a. Sort and filter data in a
worksheet
b. Perform Mathematical
Calculations verify -AutoSum
c. Perform Automatic CalculationsAlign Cell Entries
a. Enter formula
b. Use Cell References in Formulae
c. Use Automatic updating function
of Excel Formulae
d. Use Mathematical Operators in
Formulae
e. Use Excel Error Message and
Help
a. Use Reference Operators
b. Work with sum, Sum if , Count
and Count If Functions
c. Fill Cells Automatically
a. Use data in Excel sheet to

Create technical charts and
graphs Produce Excel Line
Graph
b. Produce a Pictograph in
Excel
a. Format Excel sheet
b. Insert headers &footers
and print
18.
To Create Excel Functions,

Filling Cells
19.
To Practice Excel Graphs and

Charts
a. Produce an Excel Pie Chart

b. Produce
c. Excel Column Chart
20.
To format a Worksheet in Excel,

page setup and print
21.
To familiarize with Ribbon layout

&features of PowerPoint 2007.
a. Shade alternate rows of data

b. Add currency and percent
symbols
c. Change height of a row and
width of a column
d. Change data alignment
e. Insert Headers and Footers
f. Set Print Options and Print
Use various options in Home, insert
, design, animation , slideshow,
Review &View in the PowerPoint
I -74
Key Competencies
Use built in functions in

Excel
Enter formula for automatic

calculations
a. Create Excel sheets

involving cross references
and equations
b. Use the advanced
functions for conditional
calculations
Access required options in

the tool bar
Exp
No.
22.

To create a simple PowerPoint
Presentation
23.
To Set up a Master Slide in

PowerPoint and add notes
24.
To Insert Text and Objects
25.
To insert a Flow Chart /

Organizational Charts
26.
To insert a Table
27.
To insert a Charts/Graphs
Competencies
a. Insert a New Slide into
PowerPoint
b. Change the Title of a PowerPoint
Slide
c. PowerPoint Bullets
d. Add an Image to a PowerPoint
Slide
e. Add a Textbox to a PowerPoint
slide
a. Create a PowerPoint Design
Template
b. Modify themes
c. Switch between Slide master
view and Normal view
d. Format a Design Template
Master Slide
e. Add a Title Slide to a Design
Template
f. The Slide Show Footer in
PowerPoint
f. Add Notes to a PowerPoint
Presentation
a. Insert Text and objects
b. Set Indents and line spacing
c. Insert pictures/ clipart
d. Format pictures
e. Insert shapes and word art
f. Use 3d features
g. Arrange objects
a. Create a Flow Chart in
PowerPoint
b. Group and Ungroup Shapes
c. Use smart art
a. PowerPoint Tables
b. Format the Table Data
c. Change Table Background
d. Format Series Legend
a. Create 3D Bar Graphs in
PowerPoint
b. Work with the PowerPoint
Datasheet
c. Format a PowerPoint Chart Axis
d. Format the Bars of a Chart
e. Create PowerPoint Pie Charts
f. Use Pie Chart Segments
g. Create 2D Bar Charts in
PowerPoint
h. Format the 2D Chart
e. Format a Chart Background
I -75
Key Competencies
a. Create simple PowerPoint
presentation with
photographs/ClipArt and
text boxes
b. Use bullets option
a. Setup Masterslide and

format
b. Add notes
Inset Text and Objects

Use 3d features
Create organizational charts

and flow charts using smart
art
Insert tables and format
Create charts and Bar

graphs, Pie Charts and
format.
Exp
No.
28.

To Insert audio &video, Hyper
links in a slide
Add narration to the slide
29.
To Practice Animation effects
30.
Reviewing presentation
Competencies
a. Insert sounds in the slide and
hide the audio symbol
b. Adjust the volume in the settings
c. Insert video file in the format
supported by PowerPoint in a
slide
d. Use automatic and on click
options
e. Add narration to the slide
f. Insert Hyperlinks
a. Apply transitions to slides
b. To explore and practice special
animation effects like Entrance,
Emphasis, Motion Paths &Exit
a. Checking spelling and grammar
b. Previewing presentation
c. Set up slide show
d. Set up resolution
e. Exercise with Rehearse Timings
feature in PowerPoint
f. Use PowerPoint Pen Tool during
slide show
g. Saving
h. Printing presentation
(a) Slides
(b) Handout
I -76
Key Competencies
a.
b.
c.
Insert Sounds and Video

in appropriate format.
Add narration to the slide
Use hyperlinks to switch
to different slides and
files
Add animation effects
a.
b.
c.
d.
Use Spell check and

Grammar feature
Setup slide show
Add timing to the slides
Setup automatic slide
show

III Semester
Subject
Code
Instruction
period / week
Name of the Subject
Theory
Practical
/Tutorial
Total
Period
/ year
Duration
(hours)
Session
al Marks
End
Exam
Marks
Total
Marks
THEORY:
ME- 301
Engineering
Mathematics - II
60
ME -302
Engineering Materials
75
60
60
75
60
105
45
45
45
26
16
630
Basic Electrical&
Electronics
Engineering
Basic
ME-304
Thermodynamics
ME-305 Strength of Materials
Production
ME-306
Technology-I
PRACTICAL:
Machine Drawing
ME-307
Practice
ME-308 Fuels Lab Practice
ME-309 Electrical Engineering
Lab Practice
Manufacturing &
ME-310
Fabrication Engg.Lab
Practice -I
TOTAL
ME -303
III-1
100
100
100
100
100
100
100
100
100
100
1000
ENGINEERING MATHEMATICS II
Subject Title
Subject Code
Periods per week
S.
No
Major Topic
:
:
:
:
Engineering Mathematics-II
ME-301
04
60
Blue print
No of
Periods
Weightage
of Marks
Unit - I
1
Indefinite Integration
Short Type
Essay Type
App
App
18
34
1/2
17
31
1 1/2
15
29
1/2
1/2
10
16
60
110
2 1/2
2 1/2
Marks:
15
12
25
25
30
Unit - II
2
Definite Integration
and its applications
Unit - III
Differential Equations
of first order
Unit - IV
Statistical Methods
Total
R: Remembering type
U: Understanding type
App: Application type
40 marks
37 marks
33 marks
OBJECTIVES
Upon completion of the subject the student shall be able to
Unit-I
1.0
Use Indefinite Integration to solve engineering problems
1.1
Explain the concept of Indefinite integral as an anti-derivative.
1.2
State the indefinite integral of standard functions and properties of Integrals (u +
v) dx and ku dx where k is constant and u, v are functions of x.
1.3
Solve integration problems involving standard functions using the above rules.
1.4
Evaluate integrals involving simple functions of the following type by the method of
substitution.
i)
f(ax + b) dx where f(x) dx is in standard form.
III-2
1.5
1.6
1.7
1.8
ii)
[f(x)]n f (x) dx
iii) f (x)/[f(x)] dx
iv) f {g(x)} g (x) dx
Find the Integrals of tan x, cot x, sec x and cosec x using the above.
Evaluate the integrals of the form Sinm Cosn . d where m and n are positive
integers.
Evaluate integrals of powers of tan x and sec x.
Evaluate the Standard Integrals of the functions of the type
1
1
1
, 2
, 2
2
2
a x a x x a2
1
1
1
ii)
,
,
a2 x2
a2 x2
x2 a2
i)
iii) x 2 a 2 ,
1.9
x2 a2 , a2 x2
Evaluate the integrals of the type
a bSin d , a b cos d and a cos b sin cd .

1.10
1.11
Evaluate integrals using decomposition method.

Evaluate integrals using integration by parts with examples.
1.12
State the Bernoullis rule for evaluating the integrals of the form u.vdx .
1.13
Evaluate the integrals of the form e [f(x) + f (x)] dx.
Unit-II
2.0
Understand definite integral and use it in engineering applications
2.1
State the fundamental theorem of integral calculus
2.2
Explain the concept of definite integral.
2.3
Calculate the definite integral over an interval.
2.4
State various properties of definite integrals.
2.5
Evaluate simple problems on definite integrals using the above properties.
2.6
Explain definite integral as a limit of sum by considering an area.
2.7
Find the areas under plane curves and area enclosed between two curves using
integration.
2.8
Obtain the volumes of solids of revolution.
2.9
Obtain the mean value and root mean square value of the functions in any given
interval.
2.10 Explain the Trapezoidal rule, Simpsons 1/3 rules for approximation of integrals and
provide some examples.
Unit -III
3.0
Solve Differential Equations in engineering problems.
3.1
Define a Differential equation, its order, degree
3.2
Form a differential equation by eliminating arbitrary constants.
III-3
3.3
3.4
Solve the first order first degree differential equations by the following methods:
i.
Variables Separable.
ii.
Homogeneous Equations.
iii.
Exact Differential Equations
iv.
Linear differential equation of the form dy/dx + Py = Q,
where P and Q are functions of x or constants.
iv.
Bernoullis Equation (Reducible to linear form.)
Solve simple problems leading to engineering applications
Unit -IV
4.0
Use Statistical Methods as a tool in data analysis.
4.1
Recall the measures of central tendency.
4.2
Explain the significance of measures of dispersion to determine the degree of
heterogeneity of the data.
4.3
Find the measures of dispersion range, quartile deviation, mean deviation,
standard deviation for the given data.
4.4
Explain the merits and demerits of the above measures of dispersion.
4.5
Express relationship between measures of dispersion
4.6
Find the coefficient of variation
4.7
Explain bivariate data.
4.8
Explain the concept of correlation between two variables and co-varience.
4.9
Explain coefficient of correlation and its properties
4.10 Calculate the coefficient of correlation between two variables.
4.11 Find rank correlation co-efficient.
COURSE CONTENT
Unit-I
Indefinite Integration:
1. Integration regarded as anti-derivative Indefinite integral of standard functions.
Properties of indefinite integral. Integration by substitution or change of variable. Integrals of
the form
sinm. cosn . where m and n are positive integers. Integrals of tan x, cot x, sec x, cosec x
and powers of tan x, sec x by substitution.
Evaluation of integrals which are reducible to the following forms :
1
1
1
, 2
, 2
2
2
a x a x x a2
1
1
1
ii)
,
,
a2 x2
a2 x2
x2 a2
i)
iii) x 2 a 2 , x 2 a 2 , a 2 x 2
III-4
Integration by decomposition of the integrand into simple rational, algebric functions.

Integration by parts , Bernoullis rule.
Unit-II
Definite Integral and its applications:
2. Definite integral-fundamental theorem of integral calculus, properties of definite integrals,
evaluation of simple definite integrals. Definite integral as the limit of a sum. Area under
plane
curves Area enclosed between two curves. Volumes of solids of revolution.
Mean and RMS
values of a function on a given interval. Trapezoidal rule, Simpsons
1/3 rule to evaluate an
approximate value of a define integral.
Unit -III
Differential Equations:
3. Definition of a differential equation-order and degree of a differential equation- formation of
differential equations-solution of differential equation of first order, first degree: variableseparable, homogeneous, exact, linear differential equation, Bernoullis equation.
Unit IV
Statistical Methods:
4. Revise measures of central tendency, measures of dispersion: range, quartile deviation,
mean
deviation, standard deviation for the given data, merits and demerits, relationship
between
measures of dispersion, coefficient of variation, bivariate data, concept of
correlation, covariance,
coefficient of correlation and its properties, rank correlation coefficient.
Reference Books:
1. Integral Calculus Vol.I, by M.Pillai and Shanti Narayan
2. Thomas Calculus, Pearson Addison Wesley Publishers
3. Statistical Methods Vol.I, Das, Tata McGraw-Hill
4. Statistics, 4/e, Schaums Outline Series (SIE), McGraw-Hill
III-5
ENGINEERING MATERIALS
Subject Title
Subject Code
Periods per week
:
:
:
:
Engineering Materials
ME-302
05
75
TIME SCHEDULE
No. of
Periods
Weightage
of Marks
Introduction &
Mechanical properties of
engineering materials
04
05
--
Testing of materials
08
13
01
01
Structure of Materials
08
13
01
01
10
13
01
01
12
16
02
01
Sl. No
Major Topics
Short answer
Questions
Essay Type
Questions
Production of Iron and

Steel
Iron Carbon
Equilibrium Diagram
Heat treatment of Steel
12
16
02
01
Ferrous, Non Ferrous

Metals and their alloys
14
21
02
Powder Metallurgy
07
13
01
01
Total
75
110
10
08
OBJECTIVES
1.0
Understand the Mechanical properties of engineering materials

1.1 State the importance of various Engineering Materials used in
Mechanical processes / industries.
1.2 List t h e various engineering materials a n d their applications.
1.3 Define the following Properties.
i) Tensile, compressive and shear strength
ii) Ductility iii) H a r d n e s s iv) Toughness v) Brittleness
vi) Impact strength vii) Fatigue and
Creep strength
2.0
Understand the procedures of Testing of Materials

2.1 Differentiate between destructive and non-destructive tests.
2.2 Describe the testing procedure for tensile strength, compression strength,
shear strength, Impact strength, and hardness of metals.
2.3 Describe the procedure for Testing Materials by X- Ray, gamma Ray,
Magnaflux, Ultrasonic and penetrate test.
III-6
3.0
Indentify the Structure of materials

3.1
State the meaning of space lattice.
3.2
Define unit cell.
3.3
Describe the three main types of space lattice with legible sketch.
3.4
State the formation of grains by dendrite growth.
3.5
State the effect of rate of cooling on grain formation.
3.6
State the effect of grain size on mechanical properties.
3.7
Identify the factors promoting grain size.
3.8
Identify important stages in the phenomenon of recrystallisation.
4.0
Understand the Production of Iron and Steel

4.1
Name the various raw materials required for production of i r o n .
4.2
Describe the Blast furnace to produce Pig Iron in with legible sketch
4.3
Describe the puddling furnace to produce wrought iron with legible sketch.
4.4
Explain t h e process of manufacturing cast iron in Cupola with legible sketch.
4.5
Describe the steps in manufacturing steel by Bessemer process, L.D.
process, Open Hearth and Electric Process.
5.0
Understand the phases of Iron - Carbon Equilibrium Diagram

5.1
Explain the cooling curves of pure metal with legible sketch.
5.2
Identify the allotropic forms of pure iron with temperatures, their crystal
structures.
5.3
Draw the iron carbon diagram and identify various structures of the iron carbon
system.
5.4
Locate Eutectic, Peritectic and Eutectoid points from the Iron Carbon
diagram.
5.5
Obtain the composition of phases in a steel/cast Iron from the iron carbon
diagram.
6.0
Understand the Heat Treatment Processes of Steel.

6.1
State the importance of heat treatment for steels.
6.2
Describe the main features of the various heat treatment
operations.
6.3
Differentiate b e t w e e n annealing and normalizing.
6.4
Describe the effect of cooling rate in hardening.
6.5
State the importance of tempering.
6.6
Explain t h e use of case hardening processes like; carburizing,
nitriding and cyaniding
6.7
Describe TTT curves with legible sketch
6.8
Explain the pr ocesses Sub Zero treatment and Vacuum Hardening
7.0
Use the Ferrous, Non-Ferrous Metals and their alloys

7.1 Classify of Cast Iron Grey, White, Malleable, Spheroidal
composition, properties and applications.
7.2 State the basis of classification of plain carbon steels.
7.3 List the application of these steels.
7.4 Describe the need for alloying the steel with other elements.
7.5 State the composition and properties of alloy steels.
7.6 List industrial applications of alloy steels.
7.7 Identify the need for non-ferrous metals and their alloys in engineering
application.
III-7
Describe the properties of Copper, Aluminum, Tin, Zinc, lead, Nickel,

Magnesium and Chromium.
7.9 Indicate the composition, properties, and industrial application of the
important non-ferrous alloys.
7.10 Identify the properties of bearing metals.
7.8
8.0
Understand the processes and methods in Powder Metallurgy.

8.1 Explain the applications of powder metallurgy as a primary manufacturing
process.
8.2 State the important characteristics of metal Powders.
8.3 Explain the methods of producing powders.
8.4 Explain the following processes of forming to shape
i) Pressing, ii) Centrifugal compacting, iii) Extruding,
iv) Gravity sintering, v) Rolling, vi) isostatic moulding,
vii) Explosive compacting, vii i) H ot pressing, ix) spark sintering.
8.5 Explain the finishing operations.
8.6 State the advantages and limitations of powder metallurgy.
COURSE CONTENT
1.0
Introduction, Mechanical properties of engineering materials
1.1
A few Mechanical Engineering Materials, Importance of their study with
applications.
1.2
Various mechanical properties of engineering materials Tensile
strength, Compressive strength, Ductility, Malleability, Hardness,
Toughness, Brittleness, Impact strength, Fatigue, Creep resistance
2.0
Testing of materials
2.1
Destructive testing tests on UTM to determine tensile, compressive and
shear strengths Tests on Brinell & Rock Well hardness test Impact test on
Izod & Charpy tester.
2.2
on destructive testing Procedure for testing materials by X-ray, gamma ray,
magnetic flux and ultrasonic testing.
3.0
Structure of Materials
3.1
Crystals of metals, Space lattices, Unit cell, three main types of metallic
space lattices, namely Face Centered Cubic, Body Centered Cubic,
Hexagonal Close Packed.
3.2
Crystallisation of metal, formation of grains by dendrite growth, grain
boundary, grain size control, effect of grain size on properties factors
4.0
Production of Iron and Steel.

4.1
Raw materials, iron ores, Lime stone, Coal-their availability in India.
General Survey of Iron and steel making in India.
4.2
Manufacturing of pig iron from blast furnace.
4.3
Wrought iron by pudding furnace and Cast Iron from cupola.
4.5
Production of steel by Bessemer, L.D. process; Open hearth and Electric
processes.
Iron - Carbon Equilibrium Diagram.
5.1
Cooling curve for pure metal.
5.2
Allotropic forms of pure Iron.
5.3
Iron carbon equilibrium diagram.
5.0
III-8
6.0
Heat Treatment of Steels.

6.1
Importance of heat treatment.
6.2
Heat treatment processes annealing, normalizing, hardening,
tempering, c a r b u r i z i n g , nitriding and cyaniding with specific examples of
engineering applications of the above.
6.3
Sub Zero treatment its importance.
6.4
Vacuum hardening its importance.
7.0
Ferrous, Non- Ferrous metals and their alloys.

7.1
Classification of Cast Iron Grey, White, Malleable, Spheroidal
Composition, properties and applications.
7.2
Plain Carbon Steels: Effect of carbon in steels, Soft, Mild, Medium and
High carbon and also their properties and applications.
7.3
Alloy Steels: Nickel Steels, Chromium steels, 18/8 stainless steel, High
Speed Steels, Manganese Steel.
7.4
Properties and uses of Copper, Aluminium, Tin, Zinc, Lead, Nickel,
Magnesium and Chromium.
7.5
Muntz metal, Admiral metal, Phosphour Bronze, Gun Metal.
7.6
Aluminum Bronze, Constantan, Monel Metal.
7.7
Properties of Bearing metals, Babbit metals.
8.0
Powder Metallurgy.
8.1
Primary manufacturing process definition, important characteristic of metal
powders,
8.2
Methods of producing powders.
8.3
Forming to shape pressing, centrifugal compacting., Extruding, Gravity
sintering, Rolling, isostatic moulding explosive compacting, , sintering, Hot
pressing, spark sintering,
8.4
Finishing operation.
8.5
Advantages and limitations of powder metallurgy.
REFERENCE BOOKS
1.
2.
3.
4.
Powder Metallrgy
Material Science
Physical Metallurgy
Introduction to Engineering Materials
by
by
by
by
III-9
TTTI,ECH
Raghavan
Avner
B.K Agarwak (McGraw-Hill)
ELECTRICAL ENGINEERING & BASIC ELECTRONICS

Subject Title
Subject Code
Periods/Week
Periods per semester
:
:
:
:
Basic Electrical & Electronics Engineering

ME-303
04
60
TIME SCHEDULE
S.
No
1.
2.
3.
4.
5.
Major Topics
Electrical engineering
fundamentals
D.C. Machines
A.C. Fundamentals &
A.C. Machines
Semi Conductors
Electrical measuring
instruments & Safety
procedures
Total
No. of
Periods
Weightage of
Marks
Short
Answer
Questions
Essay Type
Questions
12
29
03
12
18
01
20
34
03
08
13
01
08
16
02
60
110
10
08
OBJECTIVES
Upon completion of course the student shall be able to
1.0
Comprehend Basic Electrical Fundamentals.

1.1
Define Ohms Law.
1.2
State the Laws of Resistance.
1.3
State work, power and energy, with units.
1.4
State Kirchoff s laws.
1.5
Explain Kirchoff s laws.
1.6
Solve simple Problems on the above.
1.7
Define
a) Magnetic field strength, b) Flux, c) Permeability, d) Reluctance
1.8
Define
a) Electric field, b) Electric field intensity, c) Permittivity
1.9
State capacitance.
1.9
State Faradays laws of Electro Magnetic Induction. (no problems)
1.10 Explain dynamically and statistically induced E.M.F. (no problems)
1.11 State Lenzs Law. (no problems)
1.12 Explain Flemings right hand rule. (No problems)
1.13 Explain inductance
a) Self inductance, b) Mutual inductance, c) Coefficient of coupling
1.14 Solve problems on self and mutual inductances.
1.15 Explain energy stored in a magnetic field.
1.16 Derive an expression for lifting power of a magnet.
2.0
Understand D.C. Machines.

2.1
Explain the working principle of D.C. Generator.
2.2
Explain Constructional features of D.C. Generator and materials used.
III-10
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
2.14
2.15
3.0
(a) List the types of D.C. Generators.

(b) Draw schematic diagram of each type.
(a) Write formula for E.M.F equation of a D.C.Generator [No derivation]
(b) State the relation between currents and voltages for different types of D.C
generators.
Label the terminals of a D.C. Generator for armature, field and inter pole
windings.
Draw power flow diagram of D.C. Generator. (no problems on
above)
Draw the connection diagram of welding generator
Explain the principle of operation of D.C. Motor.
(a) List types of motors.
(b) Draw Schematic diagram of each type.
(a) Explain back e.m.f.
(b) State the relation between currents and voltages.
Write formula for speed of D.C. Motor in terms of supply voltage,
current and flux.
Explain necessity of starters.
Describe with a legible sketch the connection diagram of D.C. 3 point
Starter.
Explain speed control of D.C. Motors.
a). Field control
b). Armature control
List the applications of D.C. motors
Understand A.C. Fundamentals and A.C.Machines

3.1
Explain
i) Alternating current, ii) Amplitude (Peak Value), iii) Time Period
iv) Frequency, v) Instantaneous value, vi) Average value
vii) R.M.S Value, viii) Form Factor
3.2
Explain graphical and vector representation of alternating quantities.
3.3
Explain phase, phase difference.
3.4
State power in an A.C. circuit and power factor [No derivation]
i) Pure resistance, ii) Pure inductance, iii) Capacitance
3.5
Explain single phase circuit
a) Simple series circuit consisting R-L, R-C, and R-L-C.
b) Simple parallel circuit R-L-C.
3.6
Calculate the impedance, current, PF, Power and Voltage drops in a given (RL-C) circuit.
3.7
Solve simple problems on series circuits.
3.8
Explain poly phase and 3 phase system.
3.9
Explain phase difference in 3 phase system.
3.10 Explain Star-Delta connections.
3.11 Explain working principle of alternator.
3.12 Explain constructional features of Alternators.
3.13 Derive frequency and speed relations.
3.14 Explain working principle of transformer and rating of transformer.
3.15 Write relation between turns ratio, Voltage ratio and current ratios
3.16 Describe with a legible sketch a welding Transformer.
3.17 Explain three phase induction motor working Principle.
III-11
3.18
3.19
3.20
3.21
3.22
3.23
3.24
3.25
3.26
Explain constructional features of 3 phase Induction motors with legible

Sketch
a) Squirrel cage induction motor, b) Wound rotor induction motor.
Describe with a legible sketch
a)D.O.L Starter, b) Star Delta Starter, c) Rotor resistance starter
Explain forward and reverse running of Induction motor.
State the application of 3 phase induction Motor.
Explain the working principle of single Phase induction motor.
List types of single phase induction Motors.
Draw circuit diagram for single phase Induction motors.
Explain forward and reverse running of Single phase induction
motor.
List the Applications of single phase induction Motors.
4.0
Understand the Principles of Semi-Conductor Devices.

4.1
Classify materials as conductor, semi-conductors and insulators.
4.2
Distinguish between intrinsic and extrinsic semiconductors.
4.3
Describe the formation of P- type and N- type materials.
4.4
Identify majority and minority carries in P&N type materials.
4.5
Explain the formation of PN Junction diode.
4.6
Describe the working of PN junction diodes with forward bias & reverse bias
with the help of legible sketch.
4.7
Understand the working of PNP & NPN transistors
4.8
Draw the different transistor configuration.
4.9
Draw the input & output characteristics of C.B., C.E & C.C.
configuration.
4.10 Describe the operation of Zener diode with the help of legible sketch.
4.11 Distinguish between Zener & Avalanche break down.
4.12 Explain the operation of LED, LCD & the materials used.
5.0
Understand Electrical Measuring Instruments and Safety Procedures.

5.1
Explain construction details and working principle of moving Coil ammeter and
volt meter.
5.2
Explain construction details and working principle of moving iron ammeter and
voltmeter.
5.3
Explain construction details working principle of dynamometer type wattmeter.
5.4
Explain construction details and working principle of A.C. single phase
induction type energy meters.
5.5
Draw the connection diagram of single phase energy meter with load.
5.6
Explain effect of electrical shock and burn.
5.7
State procedure to be adopted in case of electric shocks.
5.8
State purpose of earthling of electrical equipment and machinery.
5.9
Describe the procedure for pipe earthling with the help of legible sketch
COURSE CONTENT
1.0
Basic Concepts and Electro Magnetic Induction
1.1
Definitions: Ohm Law, Laws of resistance work, power, energy with units.
1.2
Kirchoffs Laws Simple problems.
1.3
Definitions and units magnetic field strength, flux, flux density, permeability,
reluctance.
1.4
Definitions and units electric field, field strength, permittivity, capacitance.
III-12
1.5
1.6
1.7
1.8
1.9
1.10
1.11
2.0
D.C. Machines
2.1
D.C. Generators
a) Principle of operation.b) Parts of generator and materials use.
c) Types of generators and schematic diagrams.
d) E.M.F equation (No derivation) and voltage current relations.
e)Nomenclature used for determining armature, field and interpole
windings etc.
f) Power flow diagram,g) Welding Generator.
2.2
3.0
Faradays laws of Electro magnetic induction.

Dynamically and statically induced e.m.f.
Lenzs Law, Flemings right hand rule.
Problems on above.
Inductance self and mutual coefficient of coupling.
Energy stored in a magnetic field.
Lifting power of magnet.
D.C. Motors
a) Principle of operation, b)Types of motors and schematic diagrams
c) Back e.m.f and speed equation and relation between voltages and
currents.
d) Starters necessity and connection diagram of 3 point starter.
e) Speed control field and armature control, f) Applications of motors.
A.C. Fundamentals and Machines

3.1
Definition alternating current, voltage amplitude, time period frequency,
instantaneous value, Average value, r.m.s. value, form factor.
3.2
Graphical and vector representation of Alternating quantities.
3.3
Phase difference.
3.4
Power in A.C. Circuits and power factor (No Derivation).
3.5
Nature of current when alternating voltage is applied to pure resistance,
inductance and capacitance magnitude of current, power factor, power
factor angle and power.
3.6
A.C. Circuits.
3.7
Single phase series circuits calculation of impedance, current , power factor,
power and voltage drops.
3.8
3 phase circuits
a) Definition of poly phase and 3 circuits.,b) Phase difference in 3
c) Star and delta connections, definitions of phase values and line values.
3.9
Alternators principle of working.
3.10 Constructional features of alternators.
3.11 Speed and frequency relations.
3.12 Transformers working principle.
3.13 Single phase transformers.
a) Voltage ratio b) Current ratio ,c) Turns ration.
3.14 Welding transformer.
3.15 Phase Induction Motor
a) Working principle of induction motor.
b) Construction of induction motor
i) Squirrel cage induction,ii) Wound Rotor induction motor.
c) Starters.
III-13
3.16
i) D.O.L, ii) Star/Delta starter, iii) Rotor resistance starter.

d) Forward and reverse running of Induction motors.
Single phase induction motors.
a) Types of single phase induction motors.
b) Circuit diagram of each type of single Phase induction motor.
c) Forward and reverse running of single Phase induction motors.
d) Applications of single phase induction Motors.
4.0
Semi Conductors.
4.1
Semi conductors N-Type, P-type.
4.2
Behaviour of PN Junction diode
4.3
Introduction of PNP, NPN Transistors.
4.4
Transistor configuration Zener diodes.
4.5
LED, LCD, Seven segment display.
5.0
Electrical Measuring Instruments & Safety Procedures

5.1
Construction and principle of operation of moving coil permanent magnet type
ammeter and voltmeter and moving iron ammeter and voltmeter.
5.2
Construction and working principle of
a) Dynamometer and wattmeter.
b) A. C. Single phase induction type Energy meter.
c) Connection diagram of single phase energy meters with load
5.3
Safety Procedures.
a) Effects of shock and burns.
b) Procedures to be adopted in case of electrical shocks.
c) Earthing of electrical equipment and machine.
REFERENCE BOOKS
1.
2.
3.
4.
Theraja B.L.
Mehtha.V.K
Gupta
Uppal
A Text Book of Electrical Engg. and Electronics.

Principles of Electronics
Fundamentals of Elec. Engg.
A Text Book of Elec.Engg & Electronics.
III-14
BASIC THERMODYNAMICS
Subject Title
Subject Code
Periods/Week
:
:
:
:
Basic Thermodynamics
ME-304
04
60
TIME SCHEDULE
S. No.
1
2
3
4
Major Topics
Fundamentals and laws
of thermo-dynamics
Laws of perfect gases
Thermodynamic processes
in gases
Fuels and combustion
Total
Periods
Weightage
of
Marks
Short
Answer
Questions
Essay Type
Questions
12
24
03
10
21
02
22
36
02
03
16
29
03
02
60
110
10
08
OBJECTIVES
Up on completion of the course the student shall be able to
1.0
Understand the Fundamentals and laws of Thermodynamics.

1.1
Define the various terms associated with the thermodynamic system.
1.2
Name the types of thermodynamic systems.
1.4
Explain the closed system with examples.
1.5
Explain the open system with examples
1.6
Explain the isolated system with examples.
1.7
List the thermodynamic properties of system.
1.8
Define the various thermodynamic properties.
1.9
Write examples for each property and its units of measurement.
1.10 State the number of properties required to define the state of a system.
1.11 Define the modes of energy transfer to and from a system.
1.12 Represent the state of a system on a graph.
1.13
State the Zeroth law of thermodynamics.
1.14
State the first law of thermodynamics.
1.15
State the second law of thermodynamics.
1.16
Solve problems dealing with conversion of heat into work and vice
versa.
1.17 Write non-flow energy equation.
1.18 Write steady flow energy equation
1.19 Solve simple problems on energy equation.
III-15
2.0
Understand the laws of perfect gases.

2.1
Define the term Perfect Gas.
2.2
State Boyles law.
2.3
State Charles law.
2.4
State Avagadros law.
2.5
State Regnaults law.
2.6
State Joules law.
2.7
Derive characteristic gas equation.
2.8
Write the universal gas equation.
2.9
State relationship between characteristic gas constant (R), universal gas
constant (G) and molecular weight (M).
2.10 Define specific heat at constant pressure (Cp).
2.11 Define specific heat at constant volume (Cv).
2.12 Infer why Cp is more than Cv?
2.13 Derive the relationship connecting the two specific heats and characteristic
gas constant (R).
2.14 Solve simple problems using gas laws.
3.0
Understand Thermodynamic Processes on gases.

3.1
List the different thermodynamic processes on gases.
3.2
Derive an expression for work done in Iso-choric process.
3.3
Derive an expression for work done in Iso-baric process.
3.4
Derive an expression for work done in hyperbolic process.
3.5
Infer that Isothermal process is the same as hyperbolic process for gases.
3.6
Derive an expression for work done in polytropic process.
3.7
Derive an expression for work done in isentropic process.
3.8
Justify that work done in throttling process is zero.
3.9
Explain the concept of entropy.
3.10 Derive the expression for change of Entropy for the above processes.
3.11 Compute the change in internal energy of gas during a process.
3.12 Write the relationship between heat supplied, internal energy and work done.
3.13 Draw pressure- volume and temperature - Entropy diagram for the above
processes.
3.14 Solve simple problems on the above processes.
4.0
Understand the concept of fuels and combustion.

4.1
Define the term fuel.
4.2
Name different types of fuels with examples.
4.3
List the applications of different fuels.
4.4
Define higher calorific value of a fuel.
4.5
Define lower calorific value of a fuel.
4.6
Re-write Du longs formula for calorific value from chemical composition of a
fuel.
4.7
Estimate the calorific value using the above formula.
4.8
Compare solid, liquid and gaseous fuels.
4.9
Explain with line diagram the components of a Bomb-calorimeter.
4.10 Narrate the sequence of procedure for the determination of calorific value
using Bomb calorimeter.
4.11 Compute the calorific value using the test data on a bomb calorimeter unit.
4.12 Explain the working principle of Junkers gas calorimeter with a line diagram.
III-16
4.13
4.14
4.15
4.16
4.17
4.18
4.19
4.20
4.21
Narrate the sequence of procedure in the determination of C.V. of a gaseous

fuel with Junkers calorimeter.
Calculate the C.V. of a fuel with the help of test data.
Write the balance of chemical equation for the composition of Unit mass/unit
volume of a given fuel.
Estimate the minimum air required for complete combustion of unit mass / unit
volume of a fuel of given composition.
Estimate the percentage composition of flue gases during combustion with or
without excess air.
Estimate the weight of exhaust gases obtained by complete combustion of unit
weight of a fuel of given composition.
Explain with a line diagram the working of Orsats apparatus.
Narrate the sequential procedure in conducting flue gas analysis by using
Orsats apparatus.
Explain with the help of line diagram the working of mechanical type of CO2
recorder.
COURSE CONTENT
1.0
Fundamentals and laws of Thermodynamics.
1.1
Definitions for system - boundary, surroundings, working fluid and state of a
system.
1.2
Types of thermodynamic systems closed, open and isolated systems with
examples.
1.3
Properties of system- Intrinsic and Extrinsic properties with examples.
1.4
Definitions for properties like pressure (p), Volume (v), Temperature (T),
Enthalpy (H), Internal energy (U) and their units.
1.5
Definitions for quasi-static work, flow- work, specific heat.
1.6
Zeroth, first, second laws of thermodynamics, simple problems on conversion
of Heat into Work and vice versa.
1.7
Steady flow energy equation (without proof), simple problems.
2.0
Laws of perfect gases.

2.1
Brief explanation of perfect Gas Laws Boyles law, Charles Law
Avagadros Joules law and Regnaults law.
2.2
Derivation of characteristic gas equation - universal gas equation, universal
gas constant and their relationship with molecular weight of gas.
2.3
Specific heat at constant pressure, specific heat at constant volume for a gas.
Derivation for an expression showing the relationship between the two specific
heats and characteristic gas constant.
2.4
Simple problems on gas equation.
3.0
Thermodynamic processes on gases.

3.1
Types of thermodynamic processes, Isochoric, Isobaric, Isothermal,
Hyperbolic, Isentropic, Polytrophic and Throttling processes. Equations
representing the above processes.
3.2
Concept of Entropy.
3.3
Derivation for work done, change in internal energy and Entropy for the above
processes.
3.4
Calculation of heat supplied or rejected during the above processes.
3.5
Simple problems on the above processes.
III-17
4.0
Fuels and Combustion.

4.1
Definition of fuel. Types solid, liquid and gaseous fuels, examples and uses
of different types of fuels.
4.2
Calorific values (Higher and lower) of fuels, Dulongs formula for calorific
value. Calculation of calorific value of a fuel with given chemical composition.
4.3
Bomb calorimeter unit-description-procedure for determination of C.V. of solid
or liquid fuel using Bomb calorimeters, calculation of C.V. with test data.
4.4
Junkers Gas calorimeter unit description determination of calorific value of
gas using Junkers calorimeter.
4.5
Problems on C.V. determination with Junkers calorimeter test data.
4.6
Balance chemical equations for the combustion of carbon, Hydrogen, sulphur,
Methane, Ethane etc.
4.7
Calculation of minimum air required for the complete combustion of unit
mass/unit volume of fuel having a given composition. Conversion of
volumetric analysis to gravimetric analysis, and vice-versa. Calculation of
percentage composition (by weight and volume) of flue gases. Calculation of
weight of flue gases obtained by combustion of fuel with and without excess
air, simple problems.
4.8
Brief description of Orsats Apparatus & use, procedure for determination of
flue gas analysis, chemicals used for absorption of different gases in flue
gases.
4.9
Brief description and working of a mechanical type of CO2 recorder.
REFERENCE BOOKS
1.0
2.0
3.0
3.0
Engineering Thermodynamics by P. K. Nag TMH Publishers

Engineering Thermodynamics by C. P. Arora
Thermal Engineering by Mahesh M Rathore TMH Publishers
Thermal Engineering - R. S. Khurmi
S.Chand & Company
III-18
STRENGTH OF MATERIALS
Subject Title
Subject Code
Periods/Week
S
No.
1
2
3
4
5
6
:
:
:
:
Strength of Materials
ME-305
05
75
TIME SCHEDULE
No. of
Weightage of
Major Topics
Periods
Marks
Simple Stresses and Strains
16
21
Strain energy
08
13
Shear Force and Bending
moment
Theory of Simple bending &
Deflection of Beams
Torsion in Shafts & Springs
Thin Cylinders
Total
Short answer
Questions
02
Essay type
Questions
1
01
01
14
21
02
14
21
02
15
21
02
08
13
01
01
75
110
10
08
OBJECTIVES
1.0
Understand the concept of Simple Stresses and Strains

1.1
Define the term strength,
1.2
Define the Mechanical properties of commonly used engineering materials.
1.3
Explain the nature and effect of tensile, compressive and shear forces.
1.4
Define the terms stress, strain, Poissons ratio and elastic modulii
1.5
Draw the typical stress - strain curve for ductile and brittle materials under
tension indicating salient points on it.
1.6
State the significance of Factor of Safety.
1.7
Write down the relation between elastic constants E, N, K, & 1/m.
1.8
Compute stress and strain values in bodies of uniform section and of
composite section under the influence of normal forces.
1.9
Calculate thermal stresses, in bodies of uniform section and composite
sections.
1.10 Compute changes in axial, lateral and volumetric dimensions of bodies of
uniform sections under the action of normal forces.
2.0
Understand the concept of Strain Energy

2.1
Define resilience, proof resilience and modulus of resilience.
2.2
Derive an expression for the strain energy.
2.3
Obtain expressions for instantaneous stress developed in bodies subjected to
i) Gradually applied load,ii) Suddenly applied load, iii) Impact/shock load.

2.4
Compare of proof resilience in bodies subjected to the above loads.
III-19
3.0
Understand the concept of Shear Force and Bending Moment Diagrams

3.1
List the types of beams.
3.2
List the types of loading
3.3
Explain the terms shear force and bending moment.
3.4
Compute shear force and bending moment at any section of beam (for UDL
and Point loads)
3.5
Practice the diagrams of S.F. & B.M for UDL and Point loads
4.0
Understand the concept of Theory of Simple Bending and Deflection of Beams

4.1
State the theory and terms of simple bending.
4.2
List the assumptions in theory of simple bending
4.3
Derive the bending equation M / I = / y = E / R
4.4
Calculate Bending stress, Modulus of section and Moment of resistance.
4.5
Calculate the safe load, safe span and dimensions of cross section.
4.6
Explain the term deflection
4.7
State the formulae for deflection in cantilever and simply supported
beams
4.8
Calculate the values of deflection in the given beams.
5.0
Understand the concept of Torsion in Shafts and Springs

5.1
Function of Shaft
5.2
Explain Polar M.I. of solid and hollow shaft
5.3
List the assumptions in theory of Simple Torsion
5.4
Derive the torque equation T / J = fs / R = G / L
5.5
Design solid and hollow shafts
5.6
Compare strength and weight of solid and hollow shafts of the same length
and material
5.7
State the function of spring
5.8
List the types of springs
5.9
List all the applications of springs
5.10 Define the terms related to closed coil helical spring
5.11 State the formulae for the stress and deflection of closed coil helical spring
5.12 Compute the stress and deflection of the closed coil helical spring
6.0
Understand the concept of Thin Cylindrical Shells

6.1
Define cylindrical shell
6.1
Define longitudinal and hoop stress
6.2
Derive the expression for longitudinal and hoop stress for seamless and seam
shells.
6.3
Design thin cylindrical shells.
COURSE CONTENT
1
Simple Stresses and Strains

1.1
Types of forces.
1.2
Stress, Strain and their nature.
1.3
Mechanical properties of common engineering materials.
1.4
Significance of various points on stress strain diagram for M.S. and C.I.
specimens
1.5
Significance of factor of safety
1.6
Relation between elastic constants.
III-20
1.7
1.8
1.9
Stress and strain values in bodies of uniform section and of composite section
under the influence of normal forces.
Thermal stresses in bodies of uniform section and composite sections.
Related numerical problems on the above topics
Strain Energy
2.1
Strain energy or resilience, proof resilience and modulus of resilience.
2.2
Derivation of strain energy for the following cases
i) Gradually applied load, ii) Suddenly applied load, iii) Impact/shock load.
2.3
Related numerical problems.
Shear Force & Bending Moment Diagrams

3.1
Types of beams with examples.
a) Cantilever beam, b) Simply supported beam, c) Over hanging beam,
d) Continuous beam, e) Fixed beam.
3.2
Types of Loads Point load, UDL and UVL.
3.3
Definition and explanation of shear force and bending moment.
3.4
Calculation of shear force and bending moment and drawing the
diagrams by the analytical method only for the following cases.
a) Cantilever with point loads, b)Cantilever with uniformly distributed load.
b) Simply supported beam with point loads.
c) Simply supported beam with uniformly
distributed load.
d) Over hanging beam with point loads, at the centre and at free ends.
e) Over hanging beam with uniformly distributed load throughout.
f) Combination of point and UDL.for the above and problems there upon.
Theory of Simple Bending and Deflection of Beams

4.1
Explanation of terms
a) Neutral layer, b) Neutral Axis, c) Modulus of Section,
d) Moment of Resistance, e) Bending stress, f) Radius of curvature.
4.2
Assumptions in theory of simple bending.
4.3
Bending Equation M / I = / Y = E / R with derivation.
4.4
Problems involving calculations of bending stress modulus of section and
moment of resistance.
4.5
Calculation of safe loads and safe span and dimensions of cross- section.
4.6
Definition and explanation of deflection as applied to beams.
4.7
Deflection formulae without proof for cantilever and simply supported
beams with point load and uniformly distributed load only (Standard
cases only).
4.8
Related numerical problems.
5
Torsion in Shafts and Springs

5.1
Definition and function of shaft
5.2
Calculation of polar M.I. for solid and hollow shaft.
5.3
Assumptions in simple torsion
5.4
Derivation of formula T / J = fs / R= G / L
5.5
Problems on design of shaft based on strength and rigidity
5.6
Numerical Problems related to comparison of strength and weight
of solid and hollow shafts.
5.7
Explanation about spring
5.8
Classification of springs
III-21
5.9
5.10
5.11
5.12
6
Nomenclature of closed coil helical spring

Deflection formula for closed coil helical spring (without derivation)
Explanation about stiffness of spring
Numerical problems on closed coil helical spring to find
safe load, deflection, size of coil and number of coils
Thin Cylindrical Shells

6.1
Explanation of longitudinal and hoop stresses in the light of
circumferential and longitudinal failure of shell.
6.2
Derivation of expressions for the longitudinal and hoop stress for
seamless and seam shells.
6.2
Related numerical Problems for safe thickness and safe working
pressure.
REFERENCE BOOKS:
1.
2.
3.
Strength of Materials by B.C.Punmia

Strength of Materials by R.S. Khurmi
Strength of Materials by Ramamrutham
III-22
S & Chand Company
PRODUCTION TECHNOLOGY - I
Subject Title
Subject Code
Periods per Week
:
:
:
:
Production Technology - I
ME306
04
60
TIME SHEDULE
S.No
Major Topics
Lathe & Lathe Work
Shaper, Slotter, Planner
Broaching Machine
Cutting Fluids, Coolants

and Lubricants
Welding
Total
Number
of
Periods
20
29
Short
answer
Questions
03
14
29
03
02
04
10
--
01
06
13
01
01
16
29
03
02
60
110
10
08
Weightage
of Marks
Essay type
Questions
02
OBJECTIVES
1. Understand the construction details of Lathe & Lathe Work
1.1
State the working principle of lathe.
1.2
Classify lathes.
1.3
Draw the line diagram of engine lathe.
1.4
List the parts of lathe.
1.5
Describe the functions of each part in lathe.
1.6
Indicate the specifications of a lathe.
1.7
List the various operations performed on lathe including special
operations.
1.8
Explain methods of taper turning with line diagrams.
1.9
Calculate the included angle for taper turning.
1.10 List different work holding devices.
1.11 Explain the Nomenclature of Lathe (single point) tool with the help of
legible sketch
1.12 Explain the Significance of various angles.
1.13 List the various types of production lathes.
1.14 Illustrate the working principle of turret lathe, Capstan, Automatic
and Semi-automatic lathes & copying lathes.
1.15 Distinguish
between
automatic
and
semi-automatic
lathes.
1.16 Explain the need of copying lathes.
1.17 State the advantages and applications of production lathes.
III-23
2.0
Understand the construction details and working principle of Shaper,

Slotter and Planer
2.1
Illustrate the working principles of shaper, slotter, and planer.
2.2
Illustrate the constructional details of the above machines.
2.3
Explain the functions of important parts of the above machines.
2.4
List the operations performed on these machines.
2.5
State the specifications of each machine.
2.6
Explain the principle of quick-return mechanism as applied to
shaper/planer.
2.7
Describe the different methods of obtaining quick return motion.
2.8
Explain the principle of hydraulic drive with the help of a line
diagram applied to shaper.
3.0
Understand the construction details and working principle of Broaching

machine
3.1 Define Broaching.
3.2 Classify broaching machines.
3.3 Illustrate the working principles of broaching machines.
3.4 Illustrate the constructional details of the broaching machines.
3.5 State the advantages & limitations of broaching.
4.0
Understand the concept of Cutting Fluids, Coolants & Lubricants.

4.1
State the properties of cutting fluids and coolants.
4.2
Mention the types of fluids.
4.3
State the composition of cutting fluids and coolants.
4.4
List the relative merits of the cutting fluids and coolants.
4.5
Select the proper cutting fluids and coolants for various machining
operations.
4.6
Classify the lubricants.
4.7
List all the properties of lubricants.
5.0
Understand the joining process of Welding.

5.1
State the necessity of welding.
5.2
Classify the welding processes.
5.3
State the advantages and limitations of welding.
5.4
Explain the principle of arc welding.
5.5
List the tools and equipment of arc welding.
5.6
Name the proper electrodes for given metals.
5.7
Explain the principle of gas welding.
5.8
List the tools and equipment of oxy-acetylene welding.
5.9
Explain different welding procedures in arc and gas welding.
5.10 Define the terms soldering & brazing.
5.11 Differentiate soldering from brazing.
5.12 Explain the principles of soldering & brazing.
5.13 Select correct soldering materials for a given job.
5.14 Explain soldering / brazing techniques.
5.15 List the gas cutting equipment.
5.16 State the principle of flame cutting.
5.17 State the relative advantages of flame cutting over other types of
cutting.
5.18 List the various defects in welds.
III-24
5.19
5.20
5.21
5.22
5.23
List the reasons for the above.

Explain non-destructive testing of welds.
List various (special) modern welding techniques.
State the principle of at least four modern welding techniques.
Explain the principle of TIG and MIG welding.
COURSE CONTENT
1.0
Lathe and Lathe Work

1.1
Working Principle of Lathe
1.2
Types of Lathes - Engine lathe construction detailsspecifications.
1.3
Nomenclature of single point cutting tool, geometry , tool signature,
functions of tool angles.
1.4
General and special operations (Turning, facing, taper turning
thread cutting, knurling, forming, drilling, boring, reaming, key way cutting.)
1.5
Methods of taper turning explanation
1.6
Lathe accessories viz., work holding devices and tool holding devices
1.7
Turret lathe: sketch operation advantages.
1.8
Capstan lathe: sketch operation advantages.
1.9
Comparison of engine (centre lathe) turret capstan lathe.
1.10 Semi automatic lathe features.
1.11 Automatic lathe features.
1.12 Copying lathe applications.
2.0
Shaping, Slotting, and Planning

2.1 Introduction to shaper, slotter, planer.
2.2 Constructional details and specifications of shaper, slotter and
planer.
2.3 Operations on these machines.
2.4 Tools and materials.
2.5 Driving mechanisms - quick return arrangement - crank
lever mechanism, whit worth mechanism, hydraulic drive.
3.0
4.0
Broaching Machines
3.1 Introduction to broaching.
3.2 Types of broaching machines horizontal type (single
duplex ram) vertical type, pull up, pull down, and push down.
3.3 Elements of broach tool, broach teeth details nomenclature
types tool material.
Cutting Fluids, Coolants & Lubricants
4.1 Introduction.
4.2 Types of cutting fluids.
4.3 Properties and functions of fluids and coolants.
4.4 Fluids and coolants required in turning, drilling, shaping, sawing &
Broaching.
4.5 Selection of cutting fluids, methods of application of cutting fluid.
4.6 Classification of lubricants ( solid, liquid, gaseous)
4.7 Properties and applications of lubricants.
III-25
&
slotted
ram
&
5.0
Welding
5.1
Introduction.
5.2
Classification of welding processes.
5.3
Advantages and limitations of welding.
5.4
Principles of arc welding.
5.5
Arc welding equipment.
5.6
Choice of electrodes for different metals.
5.7
Principle of gas (oxy acetylene) welding.
5.8
Equipment of gas welding.
5.9
Welding procedures ( arc & gas )
5.10 Soldering and Brazing techniques.
5.11 Types and applications of solders & fluxes.
5.12 Various flame cutting processes.
5.13 Advantages and limitations of flame cutting.
5.14 Defects in welding.
5.15 Testing and inspection.
5.16 Modern welding methods, (Submerged, CO2, Atomic Hydrogen,
ultrasonic welding),
5.17 Brief description of MIG & TIG Welding.
REFERENCE BOOKS
1.
2.
3.
4.
5.
Welding Technology
Elements of Work Shop Technology vol. I & II
Engineering Metrology
Welding Technology
Manufacturing Technology (volume-1)
III-26
by
by
by
by
by
Little.
Hazra Choudry
Jain
Parmar
P.N.Rao (MGH Pub)
MACHINE DRAWING PRACTICE

Subject Title
Subject Code
Periods/ Week
Periods/Semester
:
:
:
:
Machine Drawing Practice

ME-307
07
105
TIME SCHEDULE
Introduction
12
Essay
type
Questions
-
Fastening Devices
21
10
02
Assembly Drawings
42
80
02
Piping Layouts and Joints
18
05
01
Welding Fabrication Drawings
12
05
01
S.No
Major Topics
Periods
Weightage of
Marks
Short answer
Questions
Total
105
100
04
02
Note:- Candidate has to answer all questions in part- A and one question out of two in part- B
OBJECTIVES
1.0 Understand the importance of machine drawing
1.1. Explain the importance of Machine drawing.
1.2. Review of 1st angle and 3rd angle Projections
1.3. Review of Orthographic Projections and Sectional Views.
2.0 Practice the drawing of fastening devices
2.1. Draw the standard thread profiles.
2.2. Draw bolted connections to standard proportions.
2.3. Draw different types of screws.
2.4. Draw different types of rivets and riveted connections.
2.5. Draw different types of keys and cotters.
3.0 Understand the assembly drawing practice and procedure
3.1. List the sequence of steps for preparing assembly drawing.
3.2. Practice the assembly drawing for the given components drawing.
3.3. Prepare the list of parts.
4.0 Practice the construction piping layouts
4.1. State the distinction between pipes and tubes.
4.2. Identify the common components of a piping layout.
4.3. Identify the conventional symbols used for the various components of piping layout.
4.4. Prepare single line and double line diagrams of piping layouts.
4.5. Draw the assembly drawing and sectioned views of pipe joint.
4.6. Explain the use of packing material in joint.
III-27
5.0 Appreciate the welded fabrication drawing.

5.1. Identify the different types of welds and their symbolic representation as per B.I.S.,
SP-46-1988.
5.2. Identify the elements of welding symbol and their standard location on the symbol.
5.3. State welding process to be used, surface contour and finish of weld when given in
symbolic form.
5.4. Practice the Preparation of working drawing of welded fabrications.
Key competencies to be achieved by the student
Topic
Introduction
Fastening devices
Assembly drawing
Piping layouts
Welded fabrication
drawing
Key competency
Understand the difference between I & III angle projections
Appraise the importance of sectional views in Mechanical
Engineering
Differentiate the temporary and permanent joints and their
applications
Draw the bolts, screws, nuts, rivets, keys and cotters with
standard proportions
Read the external and internal features of each part
Prepare the table of parts giving part number, its name, material
and quantity
Acquaint with the symbols used for the various components of
piping layout
Understand the importance and use of all the valves and packing
material used in pipe fittings
Specify the weld joint
Prepare the working drawing of welded fabrications.
COURSE CONTENT
1.0 Introduction
1.1. Importance of Machine Drawing.
1.2. Brief revision of 1st and 3rd angle projections
1.3. Understand the concepts of Orthographic projections and Sectional views.
2.0 Fastening Devices
2.1. Temporary and Permanent fastenings and their areas of application-thread
nomenclature, forms of screw thread profiles, metric, B.A., Acme, Knuckle, etc.
2.2. Bolts and Nuts: Specification of bolts and nuts, Different types of bolted joints (like
using through bolts, studs, screws etc.,) in different applications. Purpose of lock
nuts and their Types.
2.3. Keys and cotters: Types of keys and cotters: Difference between key and cotter
uses.
2.4. Rivets and Riveted joints: Types and proportions and specification of rivets: Different
types of riveted joints: Lap, butt-single row, double row etc., chain and zigzag riveting
calculation of diameter of rivet: Pitch and arrangement of rivets in row use of
standard proportions.
III-28
Drawing Plate: 1
1. Exercise on Orthographic projections and Sectional views.
2. Thread Nomenclature and forms of screw thread profiles.
3. Exercises in drawing bolted connections using standard proportions.
4. Drawing of various types of lock nuts & types of keys indicating their proportionate
dimensions.
5. Exercise in drawing riveted joints using standard proportions: Single row, double
row (chain and zigzag) in lap and butt joints (single & double strap).
3.0 Assembly Drawings
3.1. Need and functions of assembly and detailed drawings.
3.2. Steps in preparing assembly drawings.
3.3. Bill of materials and parts list.
3.4. Exercises in preparing assembly drawings of commonly available engineering
components.
Drawing Plate: 2
Draw the views / sectional views of
1. Jib and cotter joint assembly
2. Knuckle joint assembly
3. Assembly of muffs coupling (sold & split) coupling
4. Screw jack assembly,
5. Stuffing box.
6. Bearings.
NOTE: With the knowledge gained by the above exercises the students shall be
able to draw exercises on Socket and spigot joint, protective type flanged coupling,
piston of petrol engine, cross head, connecting rod, eccentric, flexible coupling,
universal coupling, sleeve and cotter joint, Oldhams-coupling, lathe tool post, big
end of a connecting rod, foot step bearing, Plummer block, lathe tail stock.
4.0 Piping layouts
4.1. Classification of pipes and tubes.
4.2. Components of pipes lay-out.
4.3. Screw fitting bend, elbow, tee, lateral Cross-nipple, reducing socket and plug.
4.4. Unions: Screwed ground and flanged.
4.5. Valves: Gate valve: angle valve, check valve.
4.6. Various conventional symbol used for the above components.
Drawing Plate: 3
1. Single line diagram of pipe layout two exercises.
2. Double line diagram of pipe layout one exercise.
3. Cast iron flanged pipe joint, spigot and socket joint, hydraulic pipe joint, expansion
joint, screwed joint, union joint - draw half sectional elevation and end view.
5.0 Welded fabrication drawings
5.1. Different types of weld and their basic symbols including sectional representation as
per table of I.S. standards, fillet, square butt, single V-Butt, double V-Butt, single
bevel butt, double bevel butt, stud, bead (edge or seal) spot, seam.
5.2. Elements of welding symbol and their standard location the symbol as per IS
standards reference Kode arrow head, weld symbol supplementary symbol
dimensions of welds, method of welding process, special reference.
III-29
5.3. Significance of arrow & position of arrow head significance of reference line as per
I.S. standards with reference to fillet, V-Butt an stud welds.
5.4. Supplementary symbols and special instructions: surface of reference line; as per
I.S. standards with reference to fillet, V-Butt an stud welds.
5.5. Dimensions of welds: length, location and spacing of welds as per I.S., B.I.S.,
standards with showing dimensions required on a welding.
5.6. Need of special reference
Drawing Plate: 4
1. Drawing tables and figs. Referred in the contents above taking form I.S.
standards.
2. Dimensioning a given welding drawings as per I.S., SP-46-1988.
3. Preparing working drawing of welding fabrication from given data.
REFERENCE BOOKS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
T.S.M & S.S.M in respect of Technical Drawing by TTTI, Madras

Machine Drawing by A.C. Parkinson.
Machine Drawing by Jones & Jones.
Machine Drawing by N.D. Bhat.
A text book for Technical Schools Engg. Drawing by N.C.E.R.T
Machine Drawing by R.B. Gupta.
Indian Standard Scheme of symbol for Welding by SP-46-1988.
Machine Drawing by Bhattacharyya (Oxford Publishers).
Machine Drawing by Ajeeth Singh (MGH Publishers)
Machine Drawing by N.Siddeswar, Kannaih, Sastri. (MGH Publishers)
III-30
FUELS LABORATORY PRACTICE

Subject Title
:
Subject Code
:
Total No. of Periods
:
Total Periods Per Semester :
Fuels Lab Practice

ME 308
03
45
TIME SCHEDULE
S. No.
1.
2.
3.
4.
5.
Major Title
Periods
Flash & Fire point tests
09
Viscosity measurement
12
Calorific value tests
12
Carbon residue test
06
Calibration of pressure gauge
06
Total
45
OBJECTIVES
Up on Completion of the course the student shall be able to:
1.0
Understand the determination of flash and fire point of a given sample of

fuel using given apparatus(Abels, Cleveland & Penesky martin)
2.0
Understand the determination of Viscosity of a given sample of oil using

given apparatus
3.0
Understand the determination of Calorific value of a given sample of fuel

using given apparatus
4.0
Understand the determination of amount of carbon residue of a given

sample of petroleum product
.
Understand the need and importance of calibration of pressure
gauges.
5.0
III-31
Competencies and KEY competencies to be achieved by the student

Title of the experiment
(No.of periods)
1. Flash and Fire point tests
a) Abels Apparatus (3)
b) Cleveland Apparatus (3)
c) Penesky martin Apparatus

(3)
Competencies
1. Handle the apparatus

Filling water
Fixing thermometer
2. Manipulate the apparatus
Checking heating element
Connecting regulator
3. Perform the precise operations
Observation of flame
colour
Recording temperature
4. Explain the need and scope of
the Experiment in industry

Filling water
Fixing thermometer
colour
Filling water
Fixing thermometer
colour
III-32
Key competency
Observe the flame for

change in colour and type
of flame
Record the temperature of
fuel using thermometer

of flame

of flame

(No.of periods)
2. Viscosity measurement
a) Redwood viscometer (6)
b) Saybolt viscometer(6)
Competencies

Filling water
Fixing thermometer
Handle hydrometer
Checking hydrometer
functioning
Use
Hydrometer
to
measure the density of
given oil
Record the temperature
of oil using thermometer
3. Record the time to
collect 50 ml of oil
Draw the graph between
the temperature and
viscosities
Filling water
Fixing thermometer
Handle hydrometer
Checking hydrometer
functioning
Use
Hydrometer
to
given oil
Record the temperature
of oil using thermometer
3. Record the time to
collect 50 ml of oil
4. Draw the graph between the
temperature and viscosities
III-33
Key competency
Use
Hydrometer
to
given oil
oil using thermometer
Record the time to collect
50 ml of oil
Handle the Hydrometer to

given oil
oil using thermometer
Record the time to collect
50 ml of oil

(No.of periods)
3. Calorific value tests
a) Bomb calorimeter (6)
b) Junkers gas calorimeter(6)
Competencies

Checking oxygen cylinder
regulator & Water flow
into equipment
2. Perform precise operations
Weigh the water collected
& condensed steam
Record the inlet &outlet
temperature of water
Record mass of fuel burnt
Determine the Calorific
values of solid, liquid and
gaseous fuels

Checking oxygen cylinder
regulator & Water flow
into equipment
& condensed steam
Record volume of gas
burnt
Determine the Calorific
values of solid, liquid and
gaseous fuels
III-34
Key competency

and condensed steam
Record mass of fuel burnt

and condensed steam
Record volume of gas
burnt

(No.of periods)
4. Carbon residue test (6)
5. Calibration of pressure
gauge (6)
Competencies
Key competency

Pouring of fuel oil sample
Placing of crucible in
equipment
Weighing the porcelain
crucible with and without
oil
Measure the weight of
carbon residue
Assess the percentage
carbon residue

Checking oil leakage
Pouring sufficient oil
Operate screw pump to
generate system pressure
Observe and record the
pressure due to mass
load
Record the gauge
pressure
Weigh the porcelain

crucible with and without
oil
Measure the weight of
carbon residue
Operate screw pump to

generate system pressure
Observe and record the
pressure due to mass
load
Record the gauge
pressure
COURSE CONTENT
1.
2.
3.
4
5.
Determination of flash and fire points of various fuels and lubricants using Abels,
Pensky Martins, and Clevelands apparatus.
Determination of Kinematics and Absolute viscosities of the fuel and lubricating Oils
using Redwood & Saybolt viscometers.
Determination of Calorific values of Solid and liquid fuels using Bomb calorimeter.
and Determination of Calorific value of gaseous fuel by using Junkers
calorimeter.
Determination of Carbon residue using Conradsons apparatus.
Calibration of a pressure gauge using dead weight pressure gauge tester
III-35
ELECTRICAL ENGINEERING LABORATORY PRACTICE

Subject Title
Subject Code
Periods/Week
Periods/Year
:
:
:
:
Electrical Engineering Lab Practice

ME-309
03
45
TIME SCHEDULE
S. No.
Major Topics
No. of Periods( 3
periods per
Session)
Network Laws & Theorems
12
Calibration of meters
06
Measurement of Power
06
Speed control of DC Motor
06
Brake test on 3-phase squirrel cage induction motor
03
Identification of components
06
Earthing and Safety
06
TOTAL
45
OBJECTIVES
Upon the completion of the practice the student shall be able to
I
Verify Network Laws & Theorems
II
Calibrate the different meters
III
Measure Power in DC and AC circuit
IV
PerformSpeed control of DC Shunt Motor by
Conduct Brake test on 3-phase squirrel cage induction motor.
VI
Identify the various components
VII
Demonstrate Earthing and Safety
Safety Precautions
General Safety Precautions to be observed by the student for all Electrical laboratory
Practices
1. Every student has to bring insulated tool kit and follow the general safety
precautions throughout the lab sessions
2. Whenever handling/using a meter check for zero position of the pointer and
adjust for zero position if there is any deviation
III-36
Competencies and key competencies to be achieved by the student

(No.of periods)
1. Network Laws & Theorems
Competencies
Key competency
a)Verify Ohms Law (3)
b)Verify the limitations of

Ohms law (3)
c)Verify
Law (3)
d)Verify
law (3)
Kirchoffs
current
Kirchoffs
Voltage
III-37

(No.of periods)
2. Calibrate the different meters
Competencies
Key competency
a) Calibrate Dynamometer
type of wattmeter (3)
b) Calibrate single phase

Energy meter (3)
3. Measure Power in DC and AC circuit
a) Measure power across a
Resistor using voltmeter and
ammeter when connected
across a DC supply (3)
b) Measure power and

Power factor in 1 -
inductive circuit by using
Wattmeter, Volt meter and
Ammeter when connected
across an AC supply (3)
III-38

Competencies
(No.of periods)
4. PerformSpeed control of DC Shunt Motor by
a) Rheostatic control method

(3)
b) Field control method (3)

5. Conduct Brake test on 3-phase squirrel cage induction motor.
a) Conduct brake test on 3phase squirrel cage induction
motor (3)
III-39
Key competency

(No.of periods)
6.Identification of components
a) Identify resistors based on
their colour code.
b) Identify capacitors based
on their colour code.
c) Identify diodes with their
rating
d) Identify Zener diode.
e) Identify the type of
transistor (NPN or PNP) and
their terminals (C,E,G).
(6)
7. Earthing and Safety (6)
a) Demonstrate Pipe Earthing
b)Demonstrate Plate Earthing
c) Demonstrate Procedure of
first aid on Electric shock.
Competencies
Key competency
COURSE CONTENT
(I)
Network Laws & Theorems

Ohms Law - limitations of Ohms law-. Verification of Ohms Law - Kirchoffs current
Law- Kirchoffs Voltage law -Super position theorem-Thevenins theorem
(II)
Calibration of meters
Dynamometer type of wattmeter-Single phase Energy meter
(III)
Measurement of Power
Across a Resistor in DC circuit- Across an Inductive circuit in an AC circuit.
(IV)
PerformSpeed control of DC Shunt Motor by

Rheostatic control method - Field control method
(V)
Brake test on 3-phase squirrel cage induction motor.

Conduct Brake test on 3-phase squirrel cage induction motor.
(VI)
Identify the various components

Identify
the
various
componentsDiode,Transistor.
(VII)
Resistors,Capacitors,Diode,
Earthing and Safety.

Demonstrate Pipe Earthing-Plate Earthing-First aid.
III-40
Zener
MANUFACTURING AND FABRICATION ENGINEERING LAB PRACTICE-I

Subject Title
Subject Code
Periods per Week
: Manufacturing and Fabrication Engg.Lab Practice-I

: ME 310
: 03
: 45
OBJECTIVES
Up on the completion of the course the student shall be able to:
1.0
Practice the casting principles and operations in foundry

1.1
Write the sand moulding procedures in foundry.
1.2
Prepare a mould sand mix.
1.3
Identify various tools used in foundry shop.
1.4
Prepare mould in two boxes, three boxes.
1.5
Prepare a mould ready for casting with proper provision for runners, risers and
gates
1.6
Place the cope over the drag without any mismatch
1.7
Prepare the molten metal and calculate the amount of metal to be poured in
the mould
2.0
Practice the operation of Lathe

2.1
Perform a plain turning operation on a lathe machine.
2.2
Select proper tool to perform the job.
2.3
Centre the job by dial gauge
2.4
Select the suitable speed for different operations
2.5
Use various measuring instruments for taking dimensions.
2.6
Perform step turning operation on lathe.
2.7
Calculate the taper angle.
2.8
Practice different taper turning methods on lathe
2.9
Turn the required tapers by swivelling the compound rest.
2.10 Produce articles of industrial application such as ring gauges, plug gauges,
handle etc.
3.0
Practice the joining of metals in Arc Welding

3.1
Prepare the edges for welding
3.2
Select the suitable electrode, voltage and current
3.3
Handle the Electrode Holder for laying welding beads.
3.4
Operate the welding transformer and generator.
3.5
Perform various weld joint operations.
III-41
KEY competencies to be achieved by the student.
Key competency
Moulding and Casting of solid

bearing
Moulding and Casting of
flange coupling
Moulding and Casting of split
bearing
connecting rod
V-pulley
Gear pulley
Plain turning
Step turning
Taper turning
Select the suitable sand and mix it for the

mould
Cut gates and runners
Pour sufficient quantity of molten metal
Prepare and place the core
Cutt the gates and runners
Pour the sufficient quantity of molten metal
Check the centering of the work piece using
dial gauge
Fix the cutting tool at proper inclination
Select the suitable speed, feed and depth of
cut for rough and finishing operations
Check the dimensions
dial gauge
dial gauge
Rotate the compound rest to the suitable angle
III-42
Key competency
Collar turning
Knurling
Welding
Layout of beads
Lap joint
Butt joint
Check the centring of the work piece using dial

gauge
Fix the cutting tool at proper inclination to turn
the work piece
Check the centring of the work piece using dial
gauge
Fix the cutting tool at proper inclination to turn
the work piece
Fix the knurling tool and selecting the suitable
speed and feed
Perform Edge preparation
Hold the electrode at suitable angle and
distance with respect to the work piece to
maintain the arc
Check the bead
maintain the arc
Check the bead
maintain the arc
Check the bead
III-43
COURSE CONTENT
1 Foundry
Moulding and casting of
1.1 Solid bearing
1.2 Flange coupling
1.3 Split bearing
1.4 Connecting rod
1.5 V Pulley
1.6 Gear pulley
2 Machine Shop (Turning)
2.1 Plain Turning
2.2 Step Turning
2.3 Taper Turning
2.4 Turning Collars
2.5 Knurling
2.6 Facing
3. Welding
3.1 Layout of Beads
3.2 Butt joints.
3.3 Lap joints.
III-44

IV Semester
Subjec
t Code
Name of the Subject
Instruction
period / week
Practic
Theory al/Tutor
ial
Total
Period
/ year
Duration
(hours)
Sessional
Marks
End
Exam
Marks
Total
Mark
s
THEORY:
ME Mathematics - III
401
ME Design of Machine
402
Elements-I
ME Industrial Engineering
403
ME Heat Power Engineering-I
404
ME Fluid Mechanics &
405
Hydraulic Machinery
ME Production Technology -I
406
PRACTICAL:
ME Production Drawing
407
Practice
ME Communication Skills
408
Practice
ME Material Testing Lab
409
Practice
Manufacturing &
ME Fabrication Engg. Lab
410
Practice -II
TOTAL
60
60
60
75
75
60
105
45
45
45
26
16
630
IV-1
100
100
100
100
100
100
100
100
100
100
1000
ENGINEERING MATHEMATICS III

Subject Title
Subject Code
Periods per week
S.
No
:
:
:
:
Engineering Mathematics-III
ME-401
04
60
Blue Print
Major Topic
No of
Weightage
Periods of Marks
Unit -I Differential Equations
Short Type
Essay Type
App
App
Homogenous Linear Differential

equations with constant
coefficients
05
06
Non-homogenous Linear
Differential equations with
constant coefficients
10
23
20
32
13
26
12
23
1/2
1/2
60
110
2
1/2
2
1/2
Marks
15 12
25
25
30
Unit - II
3
Laplace Transforms
Unit - III
Fourier Series
Unit - IV
Probability
Total
R: Remembering type
Understanding
U: type
App: Application type
IV-2
40 marks
37 marks
33 marks
OBJECTIVES
Unit-I
1.0
Solve Homogeneous linear differential equations with constant coefficients in
engineering situations
1.1
Solve Differential equations of the type (aD2 +bD + c)y = 0 when the roots of the
auxiliary equation are real and different, real and repeated, complex.
1.2
Solve the higher order homogeneous differential equations with constant
coefficients.
2.0
Solve Non Homogeneous linear differential equations with constant
coefficients in
engineering situations
2.1
Explain the concept of complementary function, particular Integral and general
solution of a differential equation.
2.2
Solve nth order differential equation of the type f(D) y = X where f(D) is a
polynomial of nth order and X is a function of the form k, eax , Sinax, Cosax, xn.
Unit-II
3.0
Use Laplace Transforms to solve differential equation in engineering problems
3.1
Write the definition of Laplace Transform and Laplace transform of standard
functions.
3.2
Explain the sufficient conditions of existence of Laplace Transform.
3.3
Write the properties of Laplace Transform Linear property, First shifting property,
Change of Scale.
3.4
Solve simple problems using the above properties
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.13
3.14
3.15
3.16
3.17
Write formulae for Laplace transform of t n f (t ),
f (t )
, f ( n) (t ),
t
f (u) du
interms
of Laplace transform of f (t ) .
Solve simple problems using the above formulae.
Define unit step function and write the Laplace Transform of unit step function.
Write second shifting property.
Define inverse Laplace Transform and write inverse Laplace Transform of
standard functions.
Solve simple problems on 3.9
Write first shifting property of inverse Laplace Transfrom.
Solve simple problems on 3.11
Write inverse Laplace Transforms corresponding to Laplace Transform of the
functions mentioned in section 3.5
Solve simple problems on 3.13.
Define convolution of two functions and state convolution theorem.
Solve simple problems on 3.15.
Use Laplace and inverse Laplace Transforms to solve simple differential equations
of second order.
Unit-III
4.0
Know Fourier Series expansion of functions
4.1
Define the orthogonality of functions in an interval.
4.2
Define Fourier series of a function on the interval (c, c 2 ) and write the Eulers
formulae for determining the Fourier coefficients.
IV-3
4.3
4.4
4.5
4.6
4.7
Write sufficient conditions for the existence of Fourier series for a function.
Find Fourier series of simple functions in the range (0, 2 ), ( , ) .
Write Fourier series for even and odd functions in the interval ( , ) .
Write Fourier series expansion of a function over the interval (l , l )
Write half range Fourier sine and cosine series of a function over the interval
4.8
Solve simple problems on 4.5, 4.6 and 4.7
(0, l )
Unit-IV
5.0
Understand the basic concepts of Probability
5.1
Recall sets, operations on sets and Venn-diagrams.
5.2
Explain the terminology random experiment, outcome, sample space,
elementary event and event.
5.3
Define Probability Empirical approach and axiomatic approach (Mathematical).
5.4
Prove addition theorem of probability for two mutually exclusive and exhaustive
events.
5.5
State addition theorem of probability for three mutually exclusive and exhaustive
events.
5.6
Solve simple problems on addition theorem.
5.7
Explain dependent, independent events and conditional event.
5.8
State the formula for conditional probability.
5.9
State multiplication theorem of probability.
5.10 State Bayes theorem.
5.11 Solve simple problems on conditional probability and Bayes theorem.
COURSE CONTENT
1. Homogenous linear differential equations with constant coefficients of order two and
higher with emphasis on second order.
2. Non-homogenous linear differential equations with constant coefficients of the form f(D)y
=X
where X is in the form k, eax, sin ax, cos ax, xn, (n= 1,2) complimentary function,
particular integral and general solution.
Laplace Transforms(LT)
3. Definition, sufficient conditions for existence of LT, LT of elementary functions, linearity
property, scale change property, first shifting property, multiplication by tn, division by t,
LT of derivatives and integrals, unit step function, LT of unit step function, second shifting
theorem, inverse Laplace transforms- shifting theorems and change of scale property,
multiplication by sn and division by s examples of inverse LT using partial fractions
convolution theorem (no proof) applications of LT to solve ordinary differential
equations with initial conditions (2nd order only)
Fourier Series
4. Orthogonality of trigonometric functions, Representation of a function in Fourier series
over the interval c , c 2 , Eulers formulae , sufficient conditions for existence of
Fourier series for a function, even, odd functions and their Fourier series over the interval
0, 2 , Change of length of interval Fourier series , half range series.
Probability
IV-4
5 Review of sets, operations on sets and Venn-diagrams; random experiment, outcome,

sample
space, elementary event and event, equally likely events, Definition of
Probability Empirical approach and axiomatic approach (Mathematical), addition
theorem of probability for two mutually exclusive and exhaustive events, extension of
addition theorem for three mutually exclusive and exhaustive events,
dependent,
independent events and conditional event,
probability of a conditional event,
multiplication theorem, Bayes theorem.
Reference Books
1. Higher Engineering Mathematics, B.V.Ramana, Tata McGraw-Hill
2. Probability, 2/e Schaums Outlines Series, McGraw-Hill
3. Elementary Probability and Statistics, by S.C.Gupta and V.K.Kapoor
IV-5
DESIGN OF MACHINE ELEMENTS- I

Subject Title
Subject Code
Periods/Week
Periods/Semester
:
:
:
:
S.
No
Major Topics
1.
Introduction, Principal
stresses & Theories of
failure
Bolted Joints
Riveted Joints
and
Welded Joints
Shafts,
Keys
and
Couplings
Bearings
Total
2.
3.
4.
5.
Design of Machine Elements - I

ME 402
04
60
TIME SCHEDULE
Periods
Weightage
of Marks
12
21
Short
Answer
Questions
02
Essay Type
Questions
12
11
21
23
02
01
1 1/2
02
15
29
03
02
10
60
16
110
02
10
01
08
1 1/2
OBJECTIVES
Up on completion of the course the student shall able to
1.0
Understand the concept of mechanical engineering design

1.1
Explain the basic requirements of design.
1.2
Explain the phases of design process
1.3
List the factors governing design.
1.4
Use relevant Indian Standard Codes
1.5
Derive the expressions for normal and shear stresses on any plane subjected
to combined loading
1.6
Derive the expressions for principal stresses
1.7
Solve the simple numerical problems
1.8
Explain the importance of principal stresses in machine design
1.9
Explain the importance of theories of elastic failure in machine design
1.10 Write the statements and equations of theories of elastic failure (05) without
derivation
2.0
Understand the design of Bolted Joints and power screws

2.1
Explain screw thread nomenclature and specifications of screw threads
2.2
List the different threaded fasteners with legible sketch
2.3
Explain power screw mechanism with legible sketch
2.4
Derive an expression for the torque required to raise and lower a load in a
power screw
2.5
Derive an expression for the efficiency and self locking of power screw
2.6
Explain the strength of screwed fasteners
2.7
List the stresses in bolts
2.8
Design the size of bolt for a given load requirement.
IV-6
2.9
2.10
2.11
Design the size of eye bolt for a given load requirement

Draw an eye bolt (not to scale) showing the proportions
Solve numerical problems related to the above cases
3.0
Understand the design of Riveted Joints and Welded Joints

3.1
List the basic types of riveted joints with legible sketch
3.2
Explain the terms used in riveted joints
3.3
List the types of failures in riveted joints
3.4
Evaluate the strength of a riveted joint
3.5
Design a riveted joint under the given conditions (E.g.Direct loading)
3.6
Explain the concept of Diamond or Lozenge joint
3.7
Design the diamond (structural) joint
3.8
List the types of welded joints
3.9
List the welded symbols with legible sketch
3.10 Explain the terms related to welded joints
3.11 List the merits and demerits of welded joints
3.12 Explain the lap and butt joints with legible sketch
3.13 Design the welded joints subjected to simple loading
3.14 Solve the numerical problems related to the above cases
4.0
Understand the design of Shafts, Keys and Couplings

4.1
Define the terms shaft and axle
4.2
State the functions of shaft
4.3
List the types of shafts
4.4
Distinguish between the shaft and axle
4.5
List the standard sizes of shafts as per I.S
4.6
Write the formula for power transmitted by the shaft
4.7
Design the shaft subjected to only torsion
4.8
Design the shaft subjected to only bending load(Design of axle)
4.9
Design the shaft subjected to bending and torsion based on Rankine and
Guest theories
4.10 Design the shaft against the rigidity
4.11 Compare the strength and rigidity of solid and hollow shafts
4.12 Explain the function of keys and splines.
4.13 Name the recommended materials used for keys and splines.
4.14 Design the keys based on different modes of failure and also based on
empirical relations
4.15 Write all the proportions of a spline for a given application referring tables.
4.16 Write the specifications of parallel, gib-head and taper sunk keys as per B.I.S.
4.17 Explain the function of a coupling
4.18 Classify the couplings
4.19 Design the muff coupling for a shaft of given size using empirical relations.
4.20 Design the cast iron flange-coupling (rigid type) for a given torque
4.21 Draw the above couplings according to the standard specifications
5.
Understand the design of Bearings

5.1
State the function of bearing
5.2
Classify the bearings
5.3
List the types of lubrication
5.4
Explain the construction and working principle of journal bearing
5.5
Explain the nomenclature of roller bearing
5.6
List the types of roller bearings
5.7
List the types of thrust bearings
5.8
List the Advantages and disadvantages of sliding contact bearings
5.9
List all the differences between sliding contact and roller bearings
IV-7
5.10
5.11
5.12
5.13
5.14
5.15
5.16
5.17
5.18
5.19
Explain about the bearing material

Define the terms- Rating life, Bearing load, Basic load rating and equivalent
radial load
Select a bearing for given loads using tables
List all the advantages and disadvantages of anti-friction bearings
Derive the expressions for the load and torque carried by thrust and collar
bearings under uniform pressure and wear conditions
Design a simple journal bearing using McKees equation
Calculate heat generated and dissipated in journal bearing
Calculate heat generated and dissipated in collar bearing based on uniform
pressure and uniform wear conditions
Specify a bearing
Solve the numerical problems
COURSE CONTENT
1.
Introduction
Design philosophy, Derivation of normal and shear stresses an an inclined plane,
Derivation of principal stresses and their importance. Theories of elastic failureDefinition and their mathematical statement.
Factors governing the design of machine element - nature of load, working stress,
mechanical properties of the material of the product, process of manufacture,
reliability, durability, Cost, life of product and safety.
Design procedure: General sequence of steps in designing a machine element.
Need of standard data for design purpose, use of machine design data, hand books
and other data manuals.
2.
Bolted Joints
Revision of nomenclature, form of threads specifications.
Strength of screwed fasteners and failure of bolts due to different reasons
Types of screw fasteners, Self - locking and efficiency of screw
Stresses due to initial tightening and stresses due to external forces
Stress due to combination of forces Stresses due to shear loads application
Design of Nut Hexagonal and square shapes only.
Design of eye bolt for a given load and sketching - using empirical proportions,
Applications of eye-bolt and Numerical problems
3.
Riveted joints and Welded Joints

Types of Riveted joints; Caulking and Fullering;
Types of failures; Terms related to joints, Modes of failure of riveted joint
Strength equations; Efficiency of joints; Simple problems on lap joints and butt joints;
Concept of Diamond or Lozenge joint: Simple problems.
Types of Welded joints; Advantages and disadvantages over other joints;
Terms related to weld; strength equation;
Calculation of strength of welded joints (problems on eccentric loading are omitted)
Numerical problems.
4.
Shafts, Keys and Couplings

shafts
Function of shafts and materials used for shafts
Standard sizes of shafts as per I.S, Types of shafts.
Design of diameters for solid and hollow shafts to transmit a given power at given
rpm.,
a)
based on strength
b)
based on rigidity.
IV-8
Comparison of solid and hallow shafts

Design of axle.
Numerical problems
keys
Function of keys and splines, Specification of splines.
Materials of keys and splines.
Discussion over nature of failure of key-effect of key way and the shaft strength.
Design of a rectangular sunk key considering its failure against shear and crushing
given the power transmitted by the shaft and rpm.
Design of rectangular sunk key using empirical proportions for given diameter of the
shaft. Check for strength.
Proportions of a spline for a given application using tables.
Couplings : Function of coupling & types of couplings.
Calculation of proportions of a muff coupling (solid) for a given shaft size using
empirical formulae, sketching the same from the computed dimensions.
Rigid flange coupling : Calculation of dimensions for a C.I. flange coupling and
coupling bolts for a given torque using empirical proportions Sketching the flange
coupling with the computed dimensions.
Numerical problems and sketching.
5.
Bearings
Functions, Types of bearings
Journal bearing terminology, McKees Equation, Bearing Modulus
Friction in journal bearing, Friction circle, power lost in friction at a bearing
Thrust bearing- Power lost in friction, flat pivot and flat collar under conditions of
uniform intensity of pressure and wear
Rolling contact bearings advantages and disadvantages
Components of rolling contact bearing, Rating life of roller bearing, Static load
carrying capacity, Dynamic load carrying capacity, Equivalent radial load-Life
relationship(No derivations), Foot step and collar bearings
Market or commercial specifications of ball and roller bearings as per BIS standards
REFERENCES
1.
2.
3.
4.
5.
6.
Design of Machine Elements - Abdulla Shariff.

Machine Design
- R.S.Khurmi.
Design of Machine Elements - Pandya and Shah.
Theory of machines- Thomas Bevan.
Machine Design R.K. Jain
Design of Machine Elements V B Bhandari (MGH Publishers)
IV-9
INDUSTRIAL ENGINEERING
Subject Title
Subject Code
Periods/Week
S.
No.
1.
2.
3.
4.
:
:
:
:
Major Topics
Industrial Engineering.
ME-403
04
60
TIME SCHEDULE
No. of
Weightage of
Periods
Marks
Short
Answer
Questions
Essay Type
Questions
Work Study
A. Method Study
B. Work
Measurement
Job Evaluation &
Merit Rating
Wage & Incentive
Systems
Inspection
and
S.Q.C.
Total
12
12
26
21
02
02
02
11/2
10
16
02
01
10
21
02
11/2
16
26
02
02
60
110
10
08
OBJECTIVES
1.0
A.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
Understand the principle of work study

Apply method study to a given situation.
State the steps involved in method study.
Identify the elements of chart used in method study.
Assemble the elements with symbols to form the required chart.
State the question in their order to analyse the operational sequence.
Analyse the question to form the best sequence.
Conclude the best sequence
Draw modified chart.
B.
1.9
1.10
1.11
1.12
1.13
1.14
1.15
1.16
1.17
1.18
1.19
1.20
Understand the work measurement techniques

State the purpose of work Measurement.
Describe the time study Equipment.
Describe the sequence of making Time study.
State the rules for elemental Break down
State the procedure of recording the Time.
Explain the need for rating factor.
Compute normal time.
Explain the importance of Allowances.
Compute the standard time for an operation using observed time.
State the advantages of PMTS (Predetermined Motion Time Standards).
Compute standard time using PMTS data.
State the purpose of work sampling.
IV-10
1.21
1.22
1.23
State the advantages of work sampling.

Describe the method of conducting work sampling.
Draw conclusion from work sampling.
2.0
Understand the job evaluation & merit rating

2.1
Define job evaluation
2.2
State the purpose and procedure of job evaluation
2.3
Explain the job analysis, job description and jobs specification
2.4
Explain the methods of job evolution
a)
Ranking Method
b)
Classification Method
c)
Factor comparison Method
d)
Point Rating method
2.5
State the advantages and disadvantages of above methods
2.6
Define the merit rating
2.7
State the purpose of merit rating
2.8
Explain the methods of merit rating
a)
Rating Scale method
b)
Check list method
c)
Employee comparison method
2.9
State the advantages and disadvantages of merit rating.
3.0
Understand the wage systems existing in industry.

3.1
State the types of wages.
3.2
Define the terms base wage, production bonus.
3.3
State the different incentives.
3.4
Outline the standard wage plans such as Halsey, Rowan, Emerson,
Taylors differential piece rate system
3.5
State the incentives for supervisor and executives.
3.6
Solve problems in calculating wages under different wage plans.
4.0
Understand inspection procedures & the quality control functions.

4.1 Distinguish between the terms quality of design and quality of
manufacturing.
4.2 Discuss quality cost relationship.
4.3 Discuss quality variation parameters.
4.4 Explain inspection procedures.
4.5 State the different inspection methods.
4.6 Identify the difference between different methods of inspection.
4.7 State the advantages and limitations of the methods.
4.8 Define statistical terms.
4.9 State the meaning of above terms.
4.10 State the characteristics of normal distribution.
4.11
Apply normal distribution and use of its characteristics to construct control
charts.
4.12 Construct control charts for variables and attributes.
4.13 Interpret control chart for process in control or process out of
control.
4.14 Decide the use of proper chart in given situation.
4.15 Apply the principles of Random Sampling.
4.16 Identify the situation where Random Sampling is useful.
4.17 Compute the probability of acceptance for a given product.
4.18 Draw O.C. curve for single sampling plans.
4.19 Interpret required values for O.C. Curves.
IV-11
COURSE CONTENT
Contribution of work study to productivity
1.0
Method Study.
Meaning and purpose.Process chart symbols- types.Operation process chart;
method of Constructing. Flow process chart, its elements and Relational ship.
Flow diagrams.
Other tools for method analysis.Analysing the charts and methods by questioning
processes.Decisions for improving the Methods.Purpose, basic procedures.
Time study equipment stop watch, study board, time study forms. Making time
study, checking the methods, break down of the job recording selection of
elements measurement of time.
Time study rating average rating normal performances, factors affecting
performances, rating scales, rating factor.
Allowance to be considered in determining standard time determination of standard
time. Predetermined motion time standard, Standard data, uses of the standard
data.
Work sampling; work sampling procedure Purpose collection of data
determination of the results.
2.0
Job Evaluation & Merit Rating

Job evaluation definition, objectives and procedure, job analysis Job description
and Job specification.
Methods of Job Evaluation Ranking, classification, factors comparison and point
rating methods.Merit rating definition and objectives, Methods of merit rating
rating scale, check list and employee comparison methods, advantages and
disadvantages of merit rating
3.0
Wage Systems.
Wages definition, types wage differentials reasons, Methods of wage
payments, Types of incentives, standard wage plans Halsey, Weir, Emersons,
Rowans Gantts task and Bonus systems, - Taylors piece rate system, Merrics
piece rate system Numerical problems on the above plans, Incentives to the
supervisor and executives.
4.0
Inspection and Statistical quality control - Inspection

Introduction meaning of the term quality, quality of design, quality conformance &
quality assurance- quality & cost relationship, reliability, Inspection definitionobjectives of inspection - methods of inspection floor or patrolling inspection &
centralised inspection merits, demerits-kinds of inspection trial run inspectionfirst piece inspection - pilot piece inspection - operation inspection - sample
inspection, notional inspection -final inspection - working inspection. Review of
statistical terms-Quality control-measurable & non-measurable, Variation in
manufacture-assignable causes - chance causes-inspection, causes-variablesattributes-tally sheet frequency table histogram- frequency polygon-Normal curveproperties of normal curve.
Control chart for variables
Average and grand average their significance determination of upper and lower
IV-12
control limits of X and R using statistical tables, construction of X and R charts for a
group of samples. Analysis of control charts process out of control, and in control
Thumb rules for analysis shifts, runs, trends, erratic fluctuations.
Control chart for attributes fraction defective - percent defective - P,NP, 100P
charts significance characteristics of X and R charts calculation of P from data
control limits -process in control and out of control differences between P,NP and
100P charts.
Sampling procedure lot,Meaning of the term- lot - lot quality, lot size, sample size and
acceptance number lot sampling.
Probability of acceptance - producers risk - consumers risk LTPD, AOQ and AOQL.
Single sampling plan - Parameters that affect the lot size and sample size and
acceptance number effect of sample size and acceptance
number on Probability of acceptance (Pa) - OC curves of a single
sampling plan calculation of Pa - Double sampling plan - Variables
involved in double sampling plan Calculation of Pa.
A B C standard. Problems using tables.
REFERENCE BOOKS
1.
2.
4.
5.
6.
7.
Work study by Ralph Banes.

Work study by I.L.O.
Industrial Engineering & - Management
S.Q.C by Grant & Levenworth
S.Q.C -by Juran
S.Q.C -by Gupta
IV-13
Science - by T.R.Banga
HEAT POWER ENGINEERING-I

Subject Title
Subject Code
Periods/Week
S. No.
1
2
3
4
5
6
:
:
:
:
Heat Power Engineering-I

ME-404
05
75
TIME SCHEDULE
Major Topics
Periods
Weightage
of Marks
Air Standard Cycles

Construction and working of
IC Engines
Systems of IC Engines
18
21
Short
Answer
Questions
02
Essay
type
Questions
01
08
16
02
01
16
26
02
02
Performance of IC Engines
Air Compressors
Gas
Turbines
&
Jet
Propulsion
Total
06
17
10
21
02
01
01
10
16
02
01
75
110
10
08
OBJECTIVES
Up on the completion of the course the student shall be able to
1.0
Appreciate the study of air standard cycles.

1.1
Define the term Air Standard cycle
1.2
Define the term Reversible Cycle.
1.3
Explain with a line diagram the Working of carnot cycle.
1.4
State the assumptions made in Carnot cycle.
1.5
Derive the formula for the air standard efficiency of a Carnot cycle.
1.6
Solve simple problems on Carnot Cycle.
1.7
Explain the working of Otto Cycle with help of a line diagram.
1.8
State the assumptions made in Otto Cycle.
1.9
Derive the formula for air standard Efficiency of Otto Cycle.
1.10 Solve simple problems on Otto Cycle.
1.11 Explain the working of a Diesel cycle with line diagrams.
1.12 State assumptions made in Diesel Cycle.
1.13 Derive the formula for Air Standard Efficiency of Diesel Cycle.
1.14 Solve the simple problems on Diesel Cycles.
1.15 State the reasons for Carnot cycle being highly efficient than any other cycle
working between the same temperature limits.
2.0
Understand the construction and working of internal combustion engines.

2.1
Define Heat Engine.
2.2
Classify heat engines.
2.3
Give examples for each type.
2.4
Summarise the advantages of internal combustion engines over external
combustion engines.
IV-14
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
Classify Internal Combustion Engines

Draw the legible sketch of an I.C. engines and name the various parts.
Explain with line diagram the working of a four-stroke diesel engine.
Explain with a line diagram the working of a two-stroke diesel engine.
Explain with a legible sketch the working of a four-stroke petrol engine.
Explain with a legible sketch the working of a two-stroke petrol engine.
Compare two stroke engines with four stroke engines.
Compare diesel engines with petrol engines.
Draw the valve time diagrams for two-stroke petrol and diesel engines also for
four-stroke petrol and diesel engines.
3.0
Understand the systems of internal combustion engines.

3.1
Name the various elements of the fuel systems of diesel engine.
3.2
Explain with legible sketch the working of the elements of fuel system of
diesel engine.
3.3
Name the various elements of the fuel system of a petrol engine.
3.4
Explain the functions of the elements of the fuel system in a petrol engine.
3.5
Explain with a line diagram the working of a simple carburettor.
3.6
Explain with a line diagram the working of a zenith carburettor.
3.7
State the methods of cooling in I.C. engine cylinders.
3.8
Explain with a legible sketch air cooling in I.C. engine.
3.9
Explain with line sketch the working of water cooling system with thermo
syphon method of circulation.
3.10 Explain with legible sketch the working of water cooling system with a
radiator and forced circulation.
3.11 Compare air cooling system with water cooling system.
3.12 Name the ignition systems used in petrol engines.
3.13 Explain with line sketch the working of a battery coil ignition system.
3.14 Explain with legible sketch the working of a magneto ignition system.
3.15 Compare the battery ignition system with magneto ignition system.
3.16 Name the different methods of lubricating systems in I.C. engines.
3.17 Explain with legible sketch the methods of lubricating systems in I.C. engines.
3.18 Name the different methods of governing I.C. engines.
3.19 Explain the hit and miss method governing of I.C. engines.
3.20 Explain the quality method of governing of I.C engines.
3.21 Explain with line sketch the quantity method of governing of petrol engines.
3.22 Explain the concept of super charging of I.C. engines.
3.23 List the objectives of super charging in I.C. engines.
4.0
Understand the performance of internal combustion engines.

4.1
Write the formula for brake power.
4.2
Write the formula for indicated powder.
4.3
Write the formula for Mechanical Efficiency.
4.4
Write the formula for Thermal Efficiency.
4.5
Write the formula for Relative Efficiency.
4.6
Explain the Heat balance sheet
4.7
Solve simple problems on the performance of I.C. engines using brake test
data.
5.0
Comprehend the construction and working of air compressor.

5.1
State the functions of air compressors.
5.2
Enumerate the uses of compressed air.
5.3
Name the different types of compressors.
5.4
Explain with line diagram the working of a single reciprocating air compressor.
IV-15
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
5.13
5.14
5.15
6.0
Write the formula for work done and power required by a single stage
compressor.
Solve simple problems on single acting reciprocating air compressors.
State the advantages of multi- stage compressors over single stage
compressor.
Explain the use of inter cooler.
State the conditions for minimum work done in two stage compression.
Write the formula for work done and power required in two stage
compressor.
Solve simple problems in two stage air compressor.
Name the types of rotary compressors.
Explain with line diagram the working of a centrifugal compressor.
Explain with line diagram the working of an axial flow type compressor.
Explain with line sketch the working of a vane type compressor.
Understand the working and applications of gas turbines & Jet Propulsion.
6.1
Give broad classification of gas turbines.
6.2
Compare Gas turbines with Steam turbines.
6.3
Compare gas turbines with reciprocating I.C. engines.
6.4
Mention the applications with limitations of gas turbine.
6.5
Explain with line diagrams the working of an open cycle constant pressure
type gas turbine.
6.6
Explain with line diagram the working of a closed cycle type gas turbine.
6.7
Represent cycle of operation for the above type on P-V and T-s diagrams.
6.8
Explain with line diagram the principles of operation of Ramjet engine and
turbojet engines.
6.9
State the application of jet engine.
6.10 Explain with line sketches the working of rocket engine.
6.11 Identify the fuels used in jet propulsion.
COURSE CONTENT
1.0
Air standard cycles.

1.1
Meaning of air standard cycle-its use-Reversible and irreversible process
reversible and irreversible cycles conditions for reversibility of a cycle.
1.2
Brief description of Carnot cycle with P.V. and T-S diagrams, Assumption
made Efficiency - Problems on Carnot cycle.
1.3
Brief explanation of Otto cycle with P.V. and T-S diagrams, assumptions
made Efficiency - Simple problems on Otto cycle.
1.4
Brief description of Diesel cycle with P.V. and T-S diagrams, Assumption
made Efficiency - Simple problems on Diesel cycle.
1.5
Reasons for the highest efficiency of Carnot cycle over other cycles working
between same temperature limits.
2.0
The construction and working principle of Internal Combustion Engines.

2.1
Heat engines Internal combustion engines and external combustion engines
advantages of I.C. engines over external combustion engines classification of
I.C. engines, neat sketch of I.C. engine indicating component parts, state the
function of each part and materials used for the component parts Cylinder,
crank case, crank pin, crank, crank shaft, connecting rod, wrist pin, piston,
cooling pins cylinder heads, exhaust valve, inlet valve.
2.2
Brief explanation on the principle of working of four-stroke diesel engine and
two-stroke diesel engine.
IV-16
2.3
2.4
2.5
Brief explanation on the principle of working of four stroke and two stroke
petrol engines.
Comparison of two stroke engines and four stroke engines. Comparison of
diesel engine and petrol engine.
Draw the valve time diagrams for two stroke and four stroke engines.
3.0
The systems of Internal Combustion Engines.

3.1
Descriptive treatment, with sketches of a diesel fuel system, fuel tanks, fuel
filter, fuel pump and fuel injector.
3.2
Descriptive treatment of petrol engine fuel system functions of tank, fuel filter,
fuel pump and carburettor, principles of working of a Zenith Carburettor (Line
sketch) and its advantages over simple carburettor.
3.3
Cooling system I.C. engines, air cooling, water cooling system with thermo
siphon method of circulation and water cooling system with radiator and
forced circulation (description with line diagram). Comparison of air cooling
and water cooling system.
3.4
Ignition systems Battery coil ignition and magneto ignition (description and
working). Comparison of two systems.
3.5
Types of lubricating systems used in I.C. engines descriptive treatment only
with line diagram.
3.6
Types of governing of I.C. engines hit and miss method, quantitative
method, qualitative method and combination methods of governing their
applications. Objective of super charging.
4.0
The Performance of Internal Combustion Engines.

4.1
Formulae for B.P.,F.P., I.P., mechanical efficiency, indicated thermal
efficiency, air standard efficiency, relative efficiency, Morse test,Heat balance
sheet, simple problems on performance of I.C. engines.
5.0
Air Compressors.
5.1
Functions of air compressor uses of compressed air types of air
compressors.
5.2
Single stage reciprocating air compressor its construction and working (with
line diagram) using P.V. diagram Formulae for work done and power
required- simple problems on calculation of work done and power required.
5.3
Multi stage compressors advantages over single stage compressors. Use of
air cooler conditions for minimum work in two stage compressor (without
proof) Formulae for work done and power required in two stage compressors
simple problems.
5.4
Rotary compressors types descriptive treatment of Centrifugal
compressor, axial f low type compressor and vane-type compressors.
6.0
Gas Turbines & Jet Propulsion

6.1
Gas turbines Classification open cycle gas turbines and closed cycle gas
turbines comparison of gas turbine with reciprocating I.C. engines and
steam turbines. Applications and limitations of gas turbines.
6.2
Open cycle constant pressure gas turbine general lay-out. P.V. and T.S
diagram and working of gas turbine.
6.3
Closed cycle gas turbine cycle of P.V. and T.S diagrams working of gas
turbine.
6.4
Principle of operation of Ram jet engine and turbojet engines application
of jet engines.
6.5
Rocket engine its principle of working & application.
6.6
Fuels used in jet propulsion.
IV-17
REFERENCE BOOKS
1.
Thermal Engineering
by
R.S.Khurmi.
2.
Thermal Engineering
by
Mahesh M Rathore (MGH Publishers)
2.
Thermal Engineering
by
Mathur & Mehtha
3.
Fundamentals of I.C.Engines by
Heywood
4.
Thermal Engineering
by
P.L.ballaney
FLUID MECHANICS & HYDRAULIC MACHINERY
Subject Title
Subject Code
Periods/Week
S.No
Major Topics
Fluid
Properties
&Hydrostatics
Flow of Liquids
Flow through pipes
Impact of jets
Hydraulic Turbines
Hydraulic Pumps
Total
2
3
4
5
6
:
:
:
:
Fluid Mechanics & Hydraulic Machinery

ME-405
05
75
TIME SCHEDULE
Number of Weightage
Periods
of Marks
10
16
10
10
15
15
15
75
16
16
18
21
23
110
Short
answer
Questions
02
02
02
01
02
01
10
Essay Type
Questions
01
01
01
1
1
02
08
OBJECTIVES
Understand the importance of Fluid mechanics, its application in the present
day industry and will be in a position to understand the working of Hydraulic
Machines.
1.0
2.0
PART A Fluid Mechanics

Understand the Fluid properties and Hydrostatics
1.1 Define the fluid
1.2 Classify the fluids
1.3 Distinguish between compressible (gases) and incompressible (liquids) fluids
1.4 Distinguish between ideal and real fluids
1.5 State the various units used in fluid mechanics
1.6 Define various properties of fluids and state their units
1.7 Define intensity of pressure
1.8 State units for pressure
1.9 State the Pascals law
1.10 Differentiate between gauge, absolute and vacuum pressure
1.11 Derive the expression for hydrostatic pressure gradient
1.12 Explain the concept of buoyancy
1.13 Explain the working principle of various instruments used for determining the
pressure of fluids
1.14 Solve the problems on pressure measurement by different manometers
Understand the behaviour of liquids in motion
IV-18
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
Classify the fluid flows

Distinguish between laminar flow and turbulent flow
Explain the concept on Reynolds number.
Explain three laws of conservation
Explain the various types of energies and the total energy.
Explain the velocity of a flowing liquid
Write the discharge equation and equation of continuity of flow.
State Bernoullis equation and its application in hydraulics
Explain the working principle of venturimeter, pitot tube, water and current
meters
2.10 Define Co-efficient of Velocity (Cv), Co-efficient of Contraction (Cc), Co-efficient
of discharge (Cd).
2.11 Solve problems (simple) on law of continuity, Bernoullis equation, Venturimeter
and Pitot tube.
3.0
4.0
Comprehend flow of liquids through pipes

3.1 List various losses when liquid flows through pipes
3.2 State laws of fluid friction
3.3 Write the equations for loss of head due to friction in pipes - Darcys and
chezys formulae
3.4 List various minor losses in pipe flow
3.5 Explain the hydraulic gradient and total energy lines for different pipes
3.6 Explain the pipes in series(compound pipe) and equivalent pipe
3.7 Calculate the velocity of flow, discharge and diameter of pipes connecting two
reservoirs
3.8 Explain the function of siphon and give reason for limiting the height of the pipes
3.9 Explain how the power can be transmitted through pipes carrying liquid under
pressure
3.10 Write the condition for maximum power through pipes
3.11 Solve simple problems on power transmission through pipes
Analyse forces due to the impact of jets
4.1 Derive expression for force of jet on fixed vertical, flat plate, fixed inclined flat
plate, and moving flat plate
4.2 Derive expression for the force of jet on a series of plates fixed on the rim of a
wheel
4.3 Draw velocity triangles for fixed and moving curved blades
4.4 Derive the expressions for work done, power and efficiency in the above
4.5 Solve simple problems related to the above
B. Hydraulic machines
5.0
Understand the working of hydraulic (water) Turbines

5.1 State the importance of water turbines
5.2 Draw the layout of a hydroelectric power station
5.3 Classify the water turbines on different criteria
5.4 Explain the construction details and working of Pelton wheel
5.5 Explain the construction details and working of Francis turbine
5.6 Explain the construction details and working of Kaplan turbine
5.7 Explain the draft tube theory
5.8 Explain the governing of water turbines with a legible sketch
5.9 Write the formulae for work done and efficiency of pelton wheel turbine
5.10 Write the formulae for work done and efficiency of francis turbine
5.11 Solve simple problems on water turbines
IV-19
6.0
Understand the working of hydraulic pumps

6.1 Explain the function of hydraulic pump
6.2 Classify the hydraulic pumps
6.3 Explain the principle of operation of reciprocating pumps
6.4 Describe the constructional details of single acting pump with the legible sketch
6.5 Describe the constructional details of double acting pump with the legible sketch
6.6 Explain the slip in the reciprocating pump
6.7 State the effect of velocity and acceleration of fluids in suction and delivery pipes
6.8 Explain the principle of air vessel with respect to reciprocating pump
6.9 Solve simple problems on power required to drive reciprocating pump
6.10 Explain the principle of operation of centrifugal pumps with a legible sketch
6.11 Explain the constructional details of centrifugal pump
6.12 Compare the centrifugal pump with a reciprocating pump
6.13 Explain the working of multi-stage pumps with a legible sketch
6.14 Appreciate the importance of priming in centrifugal pump
6.15 Identify the effects of leakages of air, its prevention
6.16 Explain the phenomenon of cavitation and state its effect
6.17 Write the expressions for static and manometric head of centrifugal pump
6.18 Write the formula for work done by the impeller of centrifugal pump
6.19 Explain the various losses and efficiencies of a centrifugal pump
6.20 Solve simple problems on centrifugal pumps
6.21 Draw the layout of a centrifugal pump installation
6.22 Explain the working of Jet pump with a legible sketch
6.23 Explain the working of submersible pump with a legible sketch
COURSE CONTENT
PART A Fluid Mechanics
1.0
Properties of fluids
1.1
Definition of fluid, Ideal and Real fluids, Newtonian and Non-Newtonian fluids,
compressible and incompressible fluids
1.2
Units used in Fluid Mechanics.
1.3
Fluid properties-Density, specific weight, specific gravity, viscosity and surface
tension, compressibility and capillarity.
1.4
Intensity of pressure, Pascals law, Atmospheric,Vacuum,Gauge and absolute
pressures.
1.5
Measurement of pressures by piezo-meter, , U-Tube - manometer, differential
manometer bourdon pressure gauge
1.6
The concept of buoyancy
1.7
Simple problems on pressure measurement
2.0
Flow of Liquids
2.1
Types of fluid flow- Steady and unsteady flow, Uniform and Non-uniform flow,
Two &Three dimensional flow, Rotational & irrotational flow, Laminar &
Turbulent flow
2.2
The concept of Reynolds Number.
2.3
Pressure, potential and kinetic energy of liquids, total energy
2.4
Continuity equation for one-dimensional flow
2.5
Solving of simple problems
2.6
Laws of conservation- Mass, Energy and Momentum
2.7
Velocity of liquids and discharge
2.8
Bernoullis equation and assumptions its practical applications
IV-20
2.9
2.10
2.11
Applications of Bernoullis equation - Venturimeters,

pitot-tube, current
meters
Problems on Bernoullis Equation, Venturimeter and pitot tube.
Definition of Cv,Cc, and Cd
3.0
Flow through pipes

3.1
Various losses when liquid flows through pipes, Laws of fluid friction
3.2
The equations for loss of head in pipes due to friction- Darcys & Chezys
formula (without proof)
3.3
Minor losses in pipe flow
3.4
Hydraulic gradient and total energy line for different pipes
3.5
Pipes in series(Compound pipe) and equivalent pipe
3.6
Calculation of discharge, velocity, diameter of pipe etc., for pipes connecting
two reservoirs (considering frictional losses only)
3.7
The function of Siphon, study of pressure head variations at its different
sections, minimum pressure at apex and its influence in causing separation
(Numerical problems omitted)
3.8
Expressions for power transmitted through pipes carrying liquid under
pressure
3.9
Expressions of transmission efficeny, condition for maximum efficiency
(without proof.)
3.10 Simple problems on power transmission through pipes
4.0
Impact of jets
4.1
Derivation of formulae for the force of jet on
a)
Fixed vertical flat plate
b)
Fixed inclined flat plate
c)
Moving flat plates vertical and inclined
d)
Series of flat plates fixed on the rim of a wheel
4.2
4.3
Force of jet striking at the centre and at the top of a fixed curved blade and
moving curved blade, velocity triangles
Work done, power and efficiency in the above cases. Simple problems only
PART B Hydraulic Machines
5.0
Water turbines
5.1
Introduction to hydraulic machines- water turbines, pumps
5.2
Use of water turbines in Hydra-electric power stations; line sketch showing
layout of hydro-electric power plant with head race, dam, sluice gate, pen
stock, turbine, generator and tail race.
5.3
Classification of turbines-impulse and reaction turbines brief sub-classification
as axial, radial and tangential flow type
5.4
Working principle of Pelton wheel, Francis turbine and Kaplan turbine with
simple line sketches only.
5.5
Draft tube and Governing of Water turbines
5.6
Work done and Efficiencies of Pelton wheel and Francis turbine(Without
derivation)
5.7
Simple Problems on power & efficiency of water turbines
6.0
Pumps
6.1
Function of a pump
IV-21
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
6.10
6.11
6.12
6.13
6.14
6.15
6.16
6.17
Classification of pumps
Principle of operation of a reciprocating pump
Constructional details of single acting, double acting pumps.
Effect of velocity and acceleration of fluids, in suction and delivery pipes
(without proof)
Expression for theoretical power required to drive the pump (without proof).
Simple problems related to above
Coefficient of discharge, slip, % of slip and negative slip
Air vessel
Working principle & Constructional details of centrifugal pump
Installation of centrifugal pump, showing its mountings and other accessories
Comparison between Reciprocating and Centrifugal pumps
Priming of centrifugal pump and its necessary leakages of air its prevention
Work done by the impeller, Static head, Manometric head
Efficiencies- Manometric efficiency, Volumetric efficiency, Mechanical
efficiency and Overall efficiency
Cavitation and its effect.
Simple problems on work, power and efficiency
Working principle of Jet & Submersible pumps with line diagrams.
REFERENCE BOOKS
1.
2.
3.
4.
6.
8.
Fluid Mechanics and Hydraulic Machines by Sukumar Pati, Tata McGraw Hill
publication.
Hydraulic Machines By
S.Anantha Swamy
Hydraulic Machines By
R.C. Patel
Hydraulics By Malhotra & Malhotra
Hydraulics & Hydraulic Machinery By Yeaple
Hydraulics and Pneumatics By Reya and Rao.
IV-22
PRODUCTION TECHNOLOGY - I
Subject Title
Subject Code
Periods Per Week
Periods Per Semester
S.No
1
2
3
4
Major Topics
Milling
Gear Making
Grinding and
finishing processes
Metrology
Total
:
:
:
:
Production Technology-I
ME 406
04
60
TIME SCHEDULE
Number
Weightage
of
of Marks
Periods
20
39
10
16
16
34
14
60
21
110
Short
Answer
Questions
03
02
03
Essay Type
Questions
02
10
03
01
02
01
08
OBJECTIVES
Up on completion of the course the student shall be able to understand
1.0
Understand the concept of Milling

1.1
Explain the principle of working of a Milling machine.
1.2
Classify the milling machines.
1.3
Illustrate the constructional details of milling machine
1.4
Explain the functions of each part of the milling machine.
1.5
Explain the various milling operations.
1.6
List the different milling cutters.
1.7
Explain selection of tool and work holding devices.
1.8
Explain the different indexing methods.
1.9
Explain the specifications of milling machines.
2.0
Understand the concept of Gear Making

2.1
List the different methods of producing gears.
2.2
Illustrate gear shaping.
2.3
Draw the gear hob and label its components
2.5
Describe the working of the above m/c.
2.6
List the sequence of operations in generating gear by
gear hobbing m/c.
2.7
Explain the different methods of finishing & checking gear
teeth dimensions.
2.8
Specify the gear.
2.9
List the various gear materials.
2.10 State the different heat treatment processes applied to
gears.
IV-23
3.0
Understand the concept of Grinding and finishing Processes

3.1
Explain the principle of metal removal by grinding.
3.2
List the different abrasives.
3.3
Explain the bonds and binding processes in grinding wheel
manufacturing
3.4
Identify the grinding wheel from the standard code
(Marking system or designation of wheel).
3.5
State the factors for selecting the grinding wheels.
3.6
State the methods of grinding.
3.7
Classify the grinding machines.
3.8
Illustrate the cylindrical, surface, tool and cutter grinders.
3.9
List the different work holding devices.
3.10 State the methods of wheel maintenance.
3.11 State different finishing processes by grinding.( Honing,
Lapping, Super finishing)
3.12 Explain the principle of electroplating with a legible sketch.
3.13 Explain the principle of hot dipping processes namely
galvanising, tin coating, Parkerizing and anodising.
3.14 List the various organic coatings.
3.15 Describe the processes of various organic coatings
3.16 State the principles of metal spraying.
3.17 State the features of wire process and powder process.
3.18 Select the appropriate process for surface roughness of
a given application
4.0
Understand the concept of Metrology

4.1
Identify various linear and angular measuring instruments.
4.2
Explain the principle of working of (at least 4 types) comparators with
a legible sketch.
4.3
Predict the amount of measuring accuracy using the comparator.
4.4
Identify the in-accuracies in surface finish.
4.5
Suggest the surface finish measuring instrument.
4.6
State the use of collimator and microscope.
4.7
State the principle of working of interferometer.
COURSE CONTENT
1.0
Milling
1.1
Introduction.
1.2
Types of milling machines: plain, Universal, vertical, constructional
details specifications.
1.3
Milling operations
1.4
Indexing: simple, compound and differential indexing.
1.5
Milling cutters types nomenclature of teeth teeth materials
1.6
Tool signature of milling cutter.
1.7
Tool & work holding devices.
2.0
Gear Making
2.1
Manufacture of gears by casting, moulding stamping - coining
extruding- rolling Machining.
2.2
Gear generating methods: Gear Shaping with pinion cutter & rack
cutter
2.3
Gear hobbing Description of gear hob Operation of gear
hobbing machine.
2.4
Gear finishing processes.
IV-24
2.5
2.6
Gear materials and specification.

Heat treatment processes applied to gears.
3.0
Grinding and finishing processes

3.1
Introduction principles of Metal Removal by Grinding.
3.2
Abrasives Natural & Artificial.
3.3
Bonds and binding processes: Vitrified, silicate, shellac, rubber,
bakellite.
3.4
Factors effecting the selection of grind wheels size and shape of
wheel kind of abrasive grain size grade and strength of bond
structure of grain spacing kinds of bind material.
3.5
Standard marking systems: Meaning of letters & numbers sequence of
marking Grades of letters.
3.6
Grinding machines classification: Cylindrical, Surface, Tool & Cutter
grinding machine- construction details relative merits.
3.7
Principle of centreless grinding
3.8
Advantages & limitations of centreless grinding
3.9
Work- holding devices.
3.10 Wheel maintenance Balancing of wheels Dressing and trimming of
grind wheels: Coolants used.
3.11 Finishing by grinding: Honing, Lapping, Super finishing
3.12 Electroplating Basic principles Plating metals applications.
3.13 Hot dipping: Galvanizing, Tin coating, parkerising, Anodizing.
3.14 Metal spraying: wire process, powder process and applications.
3.15 Organic coatings: Oil base Paint, Lacquer base, Enamels, Bituminous
paints, rubber base coating.
3.16 Finishing specifications.
4.0
Metrology.
4.1
Linear measurement: Slip gauges and dial indicators.
4.2
Angle measurements: Bevel protractor, Sine Bar, Angle Slip
Gauges.
4.3
Comparators :a) Mechanical b) Electrical
c) Optical
d)
pneumatic
4.4
Measurement of surface roughness: methods of measurements by
comparison, tracer instruments and by interferometry.
4.5
Collimators.
4.6
Measuring Microscope. Interferometer.
REFERENCE BOOKS
1.
2.
3.
4.
5.
6.
Manufacturing Technology
Gear Technology
A Text Book of Production Engg.
Tool Design
IV-25
P N Rao (MGH Publishers)

R.C.Patel
Jain & Gupta.
Charrathi
Dora
Donaldson
PRODUCTION DRAWING PRACTICE

Subject Title
Subject Code
Period/Week
Period per Semester
: Production Drawing Practice

: ME-407
: 07
: 105
S.No
Major Topics
1
2
3
4
5
Drawing of a Component
Limits, Fits & Tolerances
Surface finish
Specification of materials
Process sheet &
Exercises in Production
Drawing
Reprographic process
Total
TIME SCHEDULE
Number
Weightage
of
of
Periods
Marks
12
05
14
05
14
14
05
45
80
06
105
05
100
Short Answer
Questions
Esaay Type
Questions
01
01
01
-
02*
01
04
02
*NOTE :
1. Candidate has to answer all questions in part- A and one question from
Part- B out of two.
2. Part B question carries 40 marks and distributed for views, process
Sheet, selection of materials, surface finish, limits, fits and tolerances
OBJECTIVES
1.0
Understand the need of production drawing.

1.1
Distinguish the machine drawing from a production drawing.
1.2
State the factors that govern the preparation of a production drawing.
1.3
Identify the components of a production drawing.
1.4
List the function of the component.
1.5
Prepare the relevant views of the part and dimension the part.
1.6
Indicate the details of specific processes like, heat treatment, welding,
counter boring etc.
2.0
Interpret dimension to obtain a fit as per BIS standards.

2.1
State definition of fit, allowance and tolerance.
2.2
Select dimension from standards to give different type of fit for a given mating
parts.
2.3
Compute the fit from tables.
2.4
Indicate fits on the drawings.
IV-26
3.0
Identify the standard symbol and indication added to it, to represent surface
finish.
3.1
Indicate the roughness grade number and corresponding symbol as per BIS.
3.2
Indicate surface roughness on drawings.
4.0
Interpret and estimate the material requirement.

4.1
Identify the material of various components.
4.2
Specify the raw material as per commercial/BIS Standards.
4.3
Identify the standard part that can be procured directly from the market and
specify the part as per commercial/BIS Standards for procurement.
5.0
Write the process sheet of production and prepare the number of production
drawings.
5.1
Indicate the sequence of process of production.
5.2
Specify the relevant tools to obtain the accuracy and finish.
5.3
Indicate the suitable equipment.
5.4
Specify the type of measuring instruments to be used to check the prescribed
accuracy.
5.5
Prepare exercises on production drawing as mentioned in the contents.
6.0
Practice the method of preparing blue print and ammonia prints.

6.1
Understand the preparation of blue and ammonia prints from tracing.
6.2
List the advantages and disadvantages of the above prints.
6.3
Identify the other methods of reproducing drawing.
Topic
Key Competencies to be achieved by the student

Key competency
Drawing of a
Component
Understand the difference between machine drawing and

production drawing.
Identify the components in Assembly Drawing
Appraise the importance of symbols.
Limits, Fits &

Tolerances
Use of fits, allowances and tolerances.

Identify tolerance grades and zones.
Distinguish types of fits, limits
Select suitable fit for mating parts
Surface finish
Identify the surface texture , symbols and grading as per

BIS
Indicate surface roughness symbols on drawings
Identify of different material of the each component drawing.
Interpret the production processes and the sequences.

Specify the relevant tools to obtain required accuracy and
finish
Indicate equipment and measuring instruments to produce
and check the accuracy of the component.
Specification of
materials
Process sheet &
Exercises in
Production Drawing
IV-27
Reprographic process
Operate the Xerox machine, Ammonia printing machine

and microfilming machine
COURSE CONTENT
1.0
Introduction and Drawing of component.

Need of preparing a production drawing, requirements for manufacturing a product
like equipment, tools, measuring instruments depending upon processes, accuracy
and finish data available in machine drawing components of a production drawing,
fits and tolerances, surface finish, specific processes, material of the component.
Read a given assembly drawing study of the functions of the various parts of the
assembly drawing.
Preparation of detailed drawing of a specified part of the assembly.
2.0
Limits, fits and tolerances.

Definitions of limits, fits and tolerances.
Select dimensions from BIS standards to obtain clearance, transition and
interference fits for a given set to mating parts computation of fit and tolerance from
BIS table.
Preparation of drawing of mating parts and representation of fits and tolerances.
Exercises in computing tolerance and representation on the drawings for different
types of fits.
3.0
Surface finish.
Standard symbol of surface finish and indications added to it.
Representation of quality of surface finish on the drawing as BIS roughness grade
numbers.
4.0
Specifications of materials.
Materials of the parts of the assembly size of part, estimation of raw material
required for a component and specification.
Standard components (parts) like bolts, nuts, bearings etc. specification of standard
parts.
5.0
Process sheets and Production drawing exercises.

Sequence of processes of production for a particular product.
Specifications of relevant equipment and tools to obtain the desired accuracy and
surface finish. Selection of measuring instruments to check the accuracy.
Prepare the relevant views of the part(s) of a given assembly drawing needed for the
purpose of production.
Dimension the views obtained in 7.1, and indicate on it with relevant notes the
specific processes. Compute the fit from ISI tables as per the function of the
component and indicate the limits at appropriate place on the drawing prepared.
Mark the surface finish symbols with indications added.
Prepare the process sheet indicating sequence of processes and equipment, tools,
measuring instruments required.
6.0
Reprographic processes.
Brief description, sequence of operations to prepare Ammonia prints, Advantages
and limitations.
Other reproduction processes of drawings like Xerox, Microfilming etc.
IV-28
NOTE:
In order to develop the abilities required in the preparation of production

drawing in the student, the use of actual production drawing from the local
industries as exercises to the students is of vital importance.
Exercises
Flange Coupling, Universal Coupling, Eccentric, Clapper Block, Connecting rod
Drill jig, Lathe tail stock, Revolving Centre, Knuckle Joint, Plummer Block
Lathe Tool post, Non Return valve, Foot Step bearing, and Stuffing box
REFERENCE BOOKS
1.
2.
3.
4.
5.
6.
IS 696 1972-Code of Practice for General Engg. Drawing & B.I.S Code SP . 46.
IS 696 1988- IS Code on fits and tolerances.
Blur print reading for Mechanical Trades
by B.R.Sachdeva.
Machine drawing by R.B. Gupta.
Machine Drawing by Siddeswar.
Production Drawing by K.Venkat Reddy
Machine Drawing by Nagpal
IV-29
COMMUNICATION SKILLS LAB PRACTICE

(Common to all branches)
Subject title
Subject code
Periods per week
Periods per semester
:
:
:
:
Communication skills practice

ME - 408
03
45
Time Schedule
Periods
Weightage of marks
(End Exam )
Sno.
Topic
Listening I
Listening II
Introducing oneself
Describing objects
Describing events
Reporting past incidents
Speaking from observation /
reading
JAM
Group discussion
Mock interviews
Making presentations
3
3
3
3
3
3
4
5
6
7
8
9
10
11
Sessional
marks
10
10
50
30
6
6
6
6
45
60
40
Total
Rationale and Scope

In the context of globalization , competence in speaking skills is the need of the hour The
gap between the needs of the industry and the curriculum can be bridged by enabling the
students to hone their speaking and listening skills. This course aims at providing
opportunities for practicing speaking.
PBJECTIVES
Upon completion of the course the students shall be able to
Strengthen their listening skills
Strengthen their speaking skills
IV-30
20
80
100
Competencies and key competencies to be achieved by the student

Topic
Listening I
Listening II
Teachers input/ methodology

Pre- Listening eliciting, pictures
While - Listening
Post Listening project , writing
Students competence
Identifying the main idea,
Identifying specific details,
Identifying parallel and contradictory ideas
Drawing inferences,
Reasoning
Introducing
oneself
Kinds of introduction --official/

personal, dynamic vocabulary,
Body language, Model
introduction, Use of line ups
Group work /pair work,
Elicit,
Use of past tense,
Student presentations
Use of simple present tense,

Sequencing,
Appropriate vocabulary
Vocabulary ,
Use of adjectives,
GamesI spy,
Group presentations
Group work/pair work
Use of appropriate tense
Use of past tense,
Vocabulary
Use of adjectives,
Dimensions,shapes
Compare and contrast,
sequence
Use of appropriate tense,
sequencing
Use of past tense , sequencing
Speaking
from
observation/re
ading
Group work/pair work,

Reading techniques ,
Use of past tense,

Summarising , evaluating, comprehension
JAM
Effective techniques ,
Good beginning , conclusion,
tips,
Use of line ups
Expressing opinion, body
language,
Vocabulary,
Sequencing,
Fluency,
Thinking spontaneously
Expressing opinion, agree/ disagree,
fluency,Persuasive and leadership skills
FAQs , body language
Role play, body language,
Using charts , pictures, interpreting data,

sequencing,PPTs
Reporting
incidents
Describing
objects
Describing
events
Reporting
past incidents
Group
discussion
Mock
interview
Making
presentations
Use of past tense,

Relevant vocabulary
Communicative methodology (CLT) should be used to create an interactive class. Apart

from the suggestions given teachers are free to innovate to use any activity to improve the
language competence of students . Attention can also be given to improve the accent and
intonation of students.
Note:
* This subject is a theory subject.
** The workload should be calculated as theory workload.
***Examinations in the subject will be treated as a practical one.
IV-31
MATERIAL TESTING LABORATORY PRACTICE

Subject Title
Subject Code
Periods/Week
Periods/Semester
:
:
:
:
Material Testing Lab Practice

ME-409
03
45
TIME SCHEDULE
S.NO
EXPERIMENT TITLE
NO.OF
PERIODS
06
Tensile test
Compression test
06
Impact test
06
Hardness test
09
Torsion test on springs
09
Study of micro structure of Metals and alloys
09
TOTAL
45
OBJECTIVES
Up on the completion of the course the student shall be able to:
1.0
Understand the various material testing methods.

1.1
Define the various properties of materials such as: yield stress, Ultimate
stress, percentage elongation, Youngs Modulus.
1.2
Conduct experiments on concrete cube, cast iron, timber to test for its
compressive strength.
1.3
Practice the method of determining the Youngs modulus of materials by the
principle of deflection.
1.4
Determine the modulus of rigidity by the method of deflection of helical
springs.
1.5
Appreciate the importance of various mechanical properties such as
hardness, impact strength.
1.6
Perform tests to determine the above.
IV-32
1.7
1.8
1.9
Practice the method of preparing a specimen for the metallography.

Interpret the microstructure of specified ferrous and non ferrous materials.
Handle the metallurgical microscope to study the microstructures.

Exercise
1. Tensile
test
Key competencies expected

A. Fix specimen in the jaws of the
machine
B. Fit strain gauge to the specimen
C. Apply load gradually on the
specimen
D. Record load, elongation, diameter
without error
E. Plot graph stress vs strain
F. Locate points of elastic limit, yield
stress, ultimate stress on the graph
Max. Marks
A.
B.
C.
D.
E.
F.
1
2
1
2
2
2
Total: 10
Exercise
Max. Marks
2. Compression
test
A. Place the specimen in the

machine properly
B. Apply load on the specimen
C. Record load
A. 2
B. 1
C. 2
3. Impact test
A. Prepare specimen by making V

notch at the required height
B. Fix specimen on the machine
C. Release load to hit the
specimen precautious
D. Record load
4. Hardness test
A. Place the specimen on the

machine at correct location
B. Identify suitable indenter for
the specimen
C. Make indent on the specimen
properly
D. Measure diameter of
indentation
E. Calculate hardness number
5. Torsion test of
springs
6. Study of micro
structure of Metals
A. Measure spring diameter and

spring wire diameter with vernier
callipers
B. Measure deflection applying
load
C. Calculate modulus of rigidity of
spring material
A. Prepare specimen
B. Handling microscope to
IV-33
Marks
awarded
Total : 5
A. 2
B. 1
C. 1
D. 1
Total 5
A. 1
B. 1
C. 2
D. 3
E. 3
Total 10
A. 4
B. 2
C. 4
Total 10
A. 5
B. 2
Marks
awarded
and alloys
observe micro structure

C. Plot microstructure
C. 3
Total 10
COURSE CONTENT
1.
Determination of yield stress, ultimate stress, percentage reduction in area,
percentage elongation, Youngs modulus by conducting tension test on
Universal testing machine.
2.
Determination of crushing strength of concrete cube, cast iron, glass, tiles,
timber etc., using UTM/CTM
3.
Determination of Youngs Modulus by the method of deflection.
4.
Determination of Modulus of rigidity of spring steel by the deflection of springs.
5.
Determination of impact strength of the material using Izod and Charpys tests.
6.
Determination of hardness of meterial using Brinnel and Rockwell Testing
methods.
7.
Specimen preparation for the metallography.
8.
Study of microstructures of Mild steel, pure iron, Grey cast iron, S.G. Iron,
Eutectoid steel, Stainless steel, Aluminum, Brass, Bronze.
MANUFACTURING&FABRICATION ENGINEERING LAB-II PRACTICE
Subject Title
Subject Code
Periods/Week
:
:
:
:
Manufacturing/Fabrication Engg. Lab Practice II

ME-410
03
45
TIME SCHEDULE
S.NO
EXPERIMENT TITLE
Hands on practice on Lathe
NO.OF
PERIODS
18
Hands on practice in welding
12
Hands on practice in foundry processes
15
TOTAL
45
OBJECTIVES
Up on the completion of the course the student shall able to
1.0
1.1
1.2
1.3
1.4
1.5
Practice the operations on the Lathe.

Calculate the gear ratio for thread cutting.
Cut threads on a lathe machine.
Produce articles of industrial application such as snap gauges, plug gauges, handle
etc.
Perform the combination of operations to produce jobs.
Perform special turning operations to produce machine handle, eccentric turning,
male and female fit assembly
2.0
.
Practice the joining operations in Welding.

2.1
Weld the material to produce. T, H, and angular joints.
3.0
Practice the Foundry processes

3.1 Prepare a mould for connecting rod, pulleys.
3.2 Prepare Core for hollow jobs.
IV-34
COURSE CONTENT
A. Machine Shop (Turning)
1. Thread cutting 2. Handle
3. Combination of all the operations.
4. Eccentric turning. 5. Male and female fit assembly
B. Welding
1. T. Joint, 2. H Joints, 3.Angular joints.
4. 2-joints (H Joints and T Joints)
3.
Foundry
1.Connecting rod, 2.core making 3.pulleys.
Key competencies Expected from the student

S.No
Exercise
Key competency
Machine shop (Turning Shop)
Thread cutting
Production of handle
Combination of all
operations
Eccentric turning
Male and
assembly
female
a.
b.
c.
d.
Center the job with dial gauge

Fix the cutting tool in suitable angle
Turn the component with suitable speed and feed
Cut the threads with back gear arrangements
a. Align job with the axis of lathe

b. Cut the threads with back gear arrangements
a.
b.
c.
d.
a.
b.
c.
a.
b.
c.
fit d.
e.
f.
g.
Perform Centering of job

Feeding the tool
Fix the cutting tool in appropriate position
Cut the metal with suitable speed and feed
Fix the job in a chuck with correct eccentricity
Fix the cutting tool in correct position
Cut the metal with suitable speed and feed
Center the job with dial gauge
Fix the cutting tool in suitable angle
Turn the component with suitable speed and feed
Locate the center of hole
Select suitable drill bit
Drill the hole with suitable speed and feed
Enlarge the hole to suitable diameter by using boring tool
Welding
IV-35
T-Joints,
HAngular Joints
a.
b.
c.
Joints,
d.
Perform edge preparation

Hold the electrode at suitable angle
Identify the suitable Method of welding technique.
Maintain proper distance between work piece and
electrode tip produce arc
e. Check the weld bead
Foundry
S.No
Connecting rod
Core making
a.
b.
c.
d.
e.
f.
g.
a. Prepare suitable core sand mix

b. Select wooden mould box
c. Pour the core sand into the mould box and proper
ramming of the sand
d. Prepare baking of the core
Exercise
Pulleys
Select the suitable sand and its mix for the mould
Place the pattern in correct position
Ram the sand properly
Provide vent holes
Remove the pattern slowly
Pour sufficient quantity of molten metal into the mould
cavity
a.
b.
c.
d.
e.
f.
g.
h.
i.
Key competency
Select the suitable sand and its mix for the mould
Place the pattern in correct position
Prepare the core
Place the core in correct position
Ram the sand properly
Provide vent holes
Remove the pattern slowly
Pour sufficient quantity of molten metal into the mould
cavity
REFERENCE BOOKS
7.
Exercises on Work shop practice- Course material prepared By TTTI, ECH
IV-36
IV-37

V Semester
Subject
Code
Instruction
period / week
Name of the Subject
Total
Period
/ year
Duration
(hours)
Sessional
Marks
End
Exam
Marks
Theory
Practical/
Tutorial
Total
Marks
60
100
60
100
60
100
60
100
60
100
60
100
THEORY:
ME-501
ME-502
ME-503
Industrial
Management
Design of Machine
Elements -II
Estimating & Costing
Heat
Power
Engineering-II
ME-505 Fluid Power System
Machine
Tool
ME-506
Engineering
PRACTICAL:
ME-504
ME-507
CAD Lab Practice
90
100
ME-508
Life skills
Hydraulics
&
Pneumatics
Lab
Practice
Field practices
TOTAL
45
100
45
100
90
100
24
18
630
ME-509
ME-510
V-1
1000
INDUSTRIAL MANAGEMENT
Subject Title
Subject Code
Periods/Week
:
:
:
:
Industrial Management
ME 501
04
60
TIME SCHEDULE
S. No.
1.
2.
Major Topics
Principles
and functions
Management
Organisation
structure
organisational behaviour
Periods
Weightage
Of
Marks
Short
Answer
Questions
Essay
Type
Questions
10
21
02
20
34
03
of
&
Production Management
14
26
02
02
4.
Materials Management
Total
16
60
29
110
03
10
02
08
OBJECTIVES
1.0
Understand the principles of management as applied to industry

1.1 Define industry, commerce (Trade) and business.
1.2 Explain the scope and need for management.
1.3 Understand the evolution of management
1.4 Explain the principles of scientific management.
1.5 Understand functions of Management.
1.6 Differentiate between management and administration.
2.0
Understand types of ownerships, the organisation structure of an industry

and the behaviour of an individual in an organisation
2.1
Explain types of ownerships
2.2
Differentiate types of ownerships.
2.3
Explain salient features of joint stock companies.
2.4
Need of organisation structure of an industry.
2.5
Explain the line, staff and Functional organisations along with legible
sketches.
2.6
List the advantages and limitations of line, staff and functional
organisations.
2.7
List different departments in a large scale industry.
2.8
Explain the factors of effective organisation.
2.9
Explain organisational behaviour.
2.10 Explain job analysis.
2.11 Assess the incurring applicants.
2.12 Outline the selection process.
2.13 List the sources of manpower.
V-2
2.14
2.15
2.16
2.17
2.18
2.19
2.20
2.21
2.22
2.23
2.24
2.25
2.26
2.27
State motivation theories.

State Maslows Hierarchy of needs.
Explain the phenomena of satisfaction.
Explain the performance levels.
Explain reward system
List different leadership models.
Explain the trait theory of leadership.
Explain behavioural theory of Leadership.
Explain the process of decision Making.
Explain the communication process.
Analyse the behaviour of groups in an organisation.
Explain group dynamics.
Detail the process of managing conflict.
Explain conflict resolution strategies.
3.0
Understand the different aspects of production management

3.1
Differentiate and integrate production, planning and control.
3.2
Relate the production department with other departments.
3.3
State the need for planning and its advantages.
3.4
Explain the stages of Production, planning and control.
3.5
Explain routing methods.
3.6
Explain scheduling methods.
3.7
Explain dispatching.
3.8
Draw PERT/CPM networks.
3.9
Identify the critical path.
4.0
Understand the role of materials management industries

4.1
Explain the role of the materials in Industry.
4.2
Derive expression for inventory control.
4.3
Explain ABC analysis.
4.4
Define safety stock.
4.5
Define reorder level.
4.6
Write the expression for economic ordering quantity and mention the
terms involved in the expression.
4.7
Explain stock layout.
4.8
List stores records.
4.9
Explain the Bin card.
4.10 Describe Cardex method.
4.11 Explain purchasing procedures.
4.12 List purchase records.
4.13 List the stores equipment
4.14 Explain the need of material handling methods.
4.15 Explain material handling methods. List out hoists, cranes, conveyers,
trucks, and forklift trucks.
4.16 Explain break-even analysis.
V-3
COURSE CONTENT
1.
Principles and functions of management

Definitions of Industry, Commerce and Business. Evolution of management
theories. Principles of Scientific Management, functions of management.
Difference of administration and management.
2.
Organisation Structure & organisational behaviour

Role of industry, Types of ownership Sole proprietorship, Partnership, Private
limited, Public limited company, Industrial Cooperatives, Philosophy, types of
Organisations, Line and Staff and functional organisations. Advantages and
limitations, departments in a large scale industry. Effective organisation. Job
analysis, Assessing applicants, selection, motivation, different theories,
satisfaction, performance reward systems , Leadership in organisation, decision
making, communication, group dynamics, Managing conflict.
3.
Production Management.
Production, planning and control, relation with other departments, need for
planning and its advantages, Routing, scheduling, despatching, PERT and CPM,
simple problems.
4.
Materials Management.
Materials in industry, inventory control model, ABC Analysis, Safety stock, reorder, level, Economic ordering quantity, Break even analysis, Stores layout,
stores equipment, Stores records, purchasing procedures, purchase records, Bin
card, Cardex, Material handling, Manual lifting, Hoist, Cranes, conveyors, trucks,
fork trucks.
REFERENCE BOOKS
1.
2.
3.
4.
Industrial Engineering and Management

-by O.P Khanna
Production Management- by Buffa.
Engineering Economics and Management Science - by Banga & Sharma.
Personnel Management by Flippo.
V-4
DESIGN OF MACHINE ELEMENTS-II

Subject Title
Subject Code
Periods/Week
Periods/Semester
:
:
:
:
Design of Machine Elements-II

ME502
04
60
TIME SCHEDULE
S.
No
1.
2.
3.
4.
5.
Major Topics
Belts and chain drives
Gear drives
Fly wheels and
Governors
Brakes and Clutches
Cams
Total
Periods
Weightage
of Marks
12
12
21
21
Short
Answer
Questions
02
02
10
21
02
14
12
60
26
21
110
02
02
10
02
1
08
OBJECTIVES
1.
2.
Understand the Design of Belts and chain drives

1.1 List the different power drives
1.2 Compare the flexible drives with the rigid drives
1.3 Classify the belt drives
1.4 List the belt materials
1.5 Define the slip and creep in belts.
1.6 Explain the effect of slip and creep on power transmission
1.7 Derive the expression for the length of open and cross belts
1.8 Derive the expression for ratio of limiting belt tensions
1.9 Derive the expression for centrifugal tension in the belt
1.10 Explain the effect of centrifugal tension on power transmission
1.11 Design the belt cross-sectional dimensions (V-belts are excluded)
1.12 Design the cone pulley for open and cross belts
1.13 Solve the numerical problems related to the above cases
1.14 List the different elements of chain drive
1.15 Classify the chain drives
1.16 Differentiate between belt and chain drives
(Problems and derivations are excluded for chain drives)
Understand the Design of Gear drives
2.1 Explain the nomenclature of spur gear tooth.
2.2 State the law of gearing (Derivation is excluded)
2.3 Identify various tooth profiles of gear.
2.4 Explain the terminology related to gear drive
2.5 List the gear material
2.6 List different types of gear trains
2.7 List all the advantages and disadvantages of gear drives
2.8 Classify the gear drives based on different criteria
V-5
Essay Type
Questions
1
1
2.9 Write the Lewis bending equation

2.10 Design the gear based on Lewis equation
2.11 Design different types of gear trains for given velocity ratios
2.12 Explain the applications of gear trains
2.13 Solve the problems related to simple, compound and reverted gear trains
3.
Understand the Design of Fly wheels and Governors

3.1 State the function of flywheel
3.2 List the applications of flywheel
3.3 Explain the terms related to flywheel
3.4 Derive the expression for maximum fluctuation the formula for energy
stored by flywheel
3.5 Design the rim type flywheel for the max fluctuation of energy
3.6 Solve simple problems on fly wheel
3.7 Explain the function of governor using legible sketch
3.8 Classify the governors
3.9 Distinguish between Governor and Flywheel
3.8 Describe the working principle of Watt governor and Porter governor using
legible sketch
3.9 Write the expressions for the height of watt and Porter governor
3.10 List the applications of governor
3.11 Explain the terms sensitiveness, stability, isochronism, hunting, effort and
power of governor
3.12 Solve simple problems on governors
4.
Understand the Design of Brakes and Clutches

4.1
State the function of brake
4.2
Classify the brakes
4.3
List all the brake material
4.4
Explain the working of block brake with the help of legible sketch
4.5
Explain the working of shoe brake with the help of legible sketch
4.6
Explain the working of band brake with the help of legible sketch
4.7
Derive an expression for the braking torque
4.8
Solve simple problems related to brakes
4.9
Explain the Function of clutch
4.10 Classify the clutches
4.11 List all the clutch materials
4.12 Explain the working of single and multiple plate c
4.13 Design single plate and multi-plate clutches based on uniform pressure
and uniform wear
4.14 Solve simple problems related to clutches
5.
Understand the Design of Cams

5.1 Explain the function of cam
5.2 Explain the features of cam profile.
5.3 Classify the cams.
5.3 Define terms related to cam profile.
5.4 Draw angular - displacement diagram for lift motion for:
a)
Uniform velocity.
b)
S.H.M.
c)
Uniform acceleration & retardation.
V-6
5.5
Draw simple cam profiles in above three cases for knife edged, flat and
roller followers. (offset followers are omitted)
COURSE CONTENT
1.
Belts and chain drives

Factors to be considered while selecting the type of drive -Belt drive, types of belt
drives; belt materials, belt joints- length of open and crossed belts (without proof).
Design procedure (Phases of design) - Design of stepped pulley belt drive only.Expression for the ratio of belt tensions (without proof).- Concept of centrifugal
tension Relation between centrifugal tension and the tension on tight side for
transmitting maximum power (derivation omitted) - Permissible stress in the belt
per unit width : per unit cross section-Calculation of belt thickness and width for
given permissible stress for open and crossed belts, considering centrifugal
tension and without considering centrifugal tension. Simple problems-Chain
drives Advantages - Types of chains Roller and silent chains - (problems on
chain drives omitted)
2.
Gear drives
Gear tooth terminology involute and cycloidal profiles - Simple, compound,
reverted & Epi cyclic gear trains. Gear material - Law of gearing-Design of
number of teeth for simple, compound and reverted gear trains for a given speed
ratio and sketching the arrangement-Applications of gear trains thread cutting
on a lathe back gear assembly of a lathe-Selection of gear wheels to cut
threads for a given pitch on a lathe-Design of spur gear based on Lewis
equation-Problems on screw cutting on lathe Back gear assembly - 3- Speed
gear box of an automobile, Calculation of velocity ratio-Description and
application of epi-cyclic gear trains (Problems on epi-cyclic gear trains not
included)
3.
Fly wheels and Governors

Purpose and applications of fly wheels Definitions of Coefficient of fluctuation of
speed and Coefficient of fluctuation of energy - Turning moment diagram of
flywheels-Design of rim type flywheel knowing the fluctuation of energy - Formula
for energy stored by fly wheel (without proof) simple problems - Governor
function Classification - Explanation of Simple Watt governor and Porter
governor - Difference between Flywheel and Governor - Sensitiveness, Stability,
Isochronism, Hunting, Effort and Power of governor - Simple problems on watt
governor and porter governor.
4.
Brakes and clutches

Function of brakes Classification of brakes-Brake materials - Working of simple
shoe brake and band brakes only - Simple problems on shoe brake and band
brakes only - Function of clutch Classification of clutches- Clutch material Working of single plate and multi-plate clutches, Difference between Brake and
clutch - Simple problems on single plate and multi-plate clutches based on
uniform pressure and uniform wear
V-7
5.
Cams
Function of cam - Classification of cams and followers uses. Working principle
of plate and cylindrical cams - Nomenclature of radial cam - Explanations of
terms cam profile, base-circle, cam angles, trace point - Motion of follower
Uniform velocity, uniform acceleration and retardation and simple harmonic
motion Time Vs. displacement diagram only - Construction of cam profile of a
plate cam with knife edged, flat & roller follower for all three types of motions
stated above - Problems on drawing of cam profiles as stated above for the
follower axis passes through the axis of the cam shaft (offset followers not
included)
REFERENCES
1.
2.
3.
4.
Machine Design
- R.S.Khurmi.
Design of Machine Elements - Pandya and Shah.
Theory of machines- Thomas Bevan.
Design of Machine Elements V B Bhandari [ Tata Mc Graw Hill]
V-8
ESTIMATING AND COSTING

Subject Title
Subject Code
Periods/Week
:
:
:
:
Estimating and Costing

ME-503
04
60
TIME SCHEDULE
S. No.
Major Topics
1.
Elements of costing
Fundamentals
of
estimation
Estimation of weights of
materials and Machining
times
Estimation of fabrication
cost
Estimation of forging cost
Estimation of foundry cost
2.
3
4.
5.
6.
Total
No. of
Periods
Weightage
of Marks
12
21
Short
Answer
Questions
02
06
08
01
16
39
03
03
08
13
01
01
10
08
16
13
02
01
01
01
60
110
10
08
OBJECTIVES
Op on completion of the course the student shall be able to
1.0
Understand the elements of costing.

1.1
Define Costing
1.2
List the objectives of costing
1.3
Explain the elements of costing
1.4
Define Depreciation
1.5
Explain the causes of depreciation
1.6
Compute depreciation by different methods.
1.7
Explain the components of cost - prime cost, factory cost, office
cost, total cost
1.8
Calculate the cost of a product taking into consideration all the
items.
1.9
Calculate the selling price of a Product.
2.0
Understand the fundamentals of estimation.

2.1
Define Estimation.
2.2
List the qualities of Estimator.
2.3
List the objectives and functions of estimation.
2.4
Explain the various constituents of estimation.
2.5
Explain the estimating procedure.
V-9
Essay Type
Questions
1
3.0
Estimate the weight of material required for a product and machining times
3.1
Divide the component drawing into simple and smaller geometrical
configurations.
3.2
Calculate the volumes and the weight of the material required.
3.3
Estimate the cost of material.
3.4
Solve simple problems on the above.
3.5
Estimate time required for machining like turning, drilling, shaping, boring,
screw cutting and grinding.
3.6
Use standard tables for feeds, cutting speeds.
3.7
Solve problems on the above.
4.0
Estimate the fabrication cost.

4.1
Define the Meaning of Fabrication
4.2
List the types of fabrication.
4.3
Estimate the cost of Fabrication by Gas welding using table
4.4
Estimate the cost of Fabrication by Arc welding .
4.4
Estimate the cost of Gas cutting using table
Note: Use Gas welding & Gas cutting table for obtaining consumption of gas,
filler rods, rate of welding, speed of cutting.
5.0
Estimate forging cost.

5.1
Define Forging.
5.2
List the types of forging
5.3
Explain various forging losses.
5.4
Estimate the length, net and gross weight and cost of forging for a given
component.
6.0
Estimate foundry cost.

6.1
List steps for making castings in foundry.
6.2
Explain the allowances provided in foundry.
6.3
State the various costs involved in estimating foundry cost
6.4
Estimate foundry cost.
COURSE CONTENT
1.0
Elements of costing.
Explanation of term costing objectives of cost accounting elements of cost
viz., material, labour and expenses Depreciation-causes- : Calculation of
depreciation charges by a few important methods.
Determine the items that go into prime cost. On cost, calculate the cost of a
product taking into consideration all items. Calculate the selling price of a
product.
2.0
Fundamentals of estimating
Explanation of the term, objectives and function of estimating principal
constituents of the estimating of the cost of component design time, drafting,
planning and production time, design and procurement or manufacture of special
tools and equipment, estimate work, labour, materials, overheads, miscellaneous
expenses estimating procedure.
V-10
3.0
Estimation of weights of materials and machining time.

Principles of dividing the component drawing into simple and smaller geometrical
configurations.
Calculation of volumes and the weight of the material.
Estimating the cost Exercises in the calculation of weight of material and cost.
Basic formula for the calculation of machining times for operations like, turning,
drilling, shaping, boring, screw cutting and grinding,. Use of standard table of
feeds, cutting speed etc. Exercises for the calculation of machining time for the
above mentioned operations.
4.0
Estimation of fabrication cost.

Explain the term fabrication types, estimate the cost of fabrication by gas
welding and arc welding estimate the cost of gas cutting exercises for the
calculation of fabrication cost.
5.0
Estimation of forging cost.

Components of forging cost, estimation of stock weight, net weight, gross weight,
losses in forging, estimation of stock size.
Exercise in the estimation of length, net and gross weight and cost of forging for
given components.
6.0
Estimation of foundry cost.

Process for finding the foundry cost, cost of metal, cost of metal melting,
moulding cost, core cost, cleaning cost, grinding and tooling cost. Methods of
estimating the above. Exercises in estimating the foundry cost.
REFERENCE BOOKS
1.
2.
3.
4.
5.
Mechanical Estimating & Costing

Industrial Engineering & Management Science.
Estimating & costing
V-11
-by B.P.Sinha
- by T.R.Banga
- by Agarwal.
-by Narang & charya.
-by T.R. Banga Sharma.
HEAT POWER ENGINEERING - II

Subject Title
Subject Code
Periods/Week
:
:
:
:
Heat Power Engineering - II

ME-504
04
60
TIME SCHEDULE
S. No.
Major Topics
Periods
Weightage
of Marks
Short
Answer
Questions
Essay
type
Questions
Properties of Steam
10
20
02
01
Steam Boilers
15
32
02
02
Steam Nozzles
10
18
02
Steam Turbines
15
20
02
02
Steam Condensers
10
20
02
60
110
10
08
Total
OBJECTIVES
1.0
Understand the Properties of Steam

1.1
Define the various properties of steam
1.2
Compute the enthalpy, internal energy and entropy at given pressure.
1.3
Use of the steam tables
1.4
Interpret the data in steam tables to calculate enthalpy and entropy.
1.5
Compute the above values using Mollier chart.
1.6
Solve simple problems on the above.
1.7
Identify the various thermodynamic processes (Expansion &
Compression of vapours)
1.8
Compute the work done, internal energy, enthalpy and entropy in each of
the above processes.
1.9
Represent the above process on T-S and H-S diagrams
1.10 Calculate dryness fraction by using Steam calorimeters
2.0
Understand the Working of Steam Boilers.

2.1
State the function of boiler
2.2
List all the uses of boilers.
2.2
Explain the working of Cochran Boiler with a legible sketch
2.3
Explain the working of Babcock Wilcox Boiler with a legible sketch
2.4
Distinguish between water tube and fire-tube boilers
2.5
Recognise the need of high-pressure modern boilers
2.6
Explain the working principle of Lamont and Benson Boilers with a legible
sketch
2.7
List all the boiler mountings
2.8
Explain the function all the mountings with a legible sketch such as
pressure gauge, water level indicator, safety valve and fusible plug.
V-12
2.9
2.10
2.11
2.12
2.13
2.14
2.15
2.16
2.17
2.18
List all the boiler accessories.

Illustrate the function of all the accessories with a legible sketch such as
economiser, Super Heater, Steam traps & Separators.
Explain the terms actual/equivalent evaporation and factor of evaporation.
Define the boiler Power
Define the boiler efficiency
Write the formula for the above.
Compute the equivalent and actual evaporation from given data.
Solve problems on Boiler Power & efficiency
Draw heat balance for boiler performance
Explain draught systems (Natural, forced & induced) in detail with a
legible sketch
3.0
Understand the Working of Steam Nozzles

3.1
Explain the Flow of steam through nozzle
3.2
Derive the expression for Velocity of steam at the exit of nozzle in terms
of heat drop analytically and by using Mollier chart.
3.3
Calculate Velocity of steam at the exit of nozzle in terms of heat drop
analytically and by using Mollier chart.
3.3
Write the expression for Discharge of steam through nozzles
3.4
Write the formula for Critical pressure ratio
3.5
Calculate cross-sectional areas at throat and exit for maximum discharge
3.6
Explain the Effect of friction in nozzles and Super saturated flow in
nozzles.
3.7
Explain the Working of steam jet injector with a legible sketch.
3.8
Solve simple problems of nozzles.
4.0
Understand the Working of Steam Turbines

4.1
Explain the principle of working of a turbine
4.2
Classify the Turbines with examples.
4.3
Differentiate the impulse turbines from reaction turbine
4.4
Explain the Principle of working of simple De-Laval turbine with a line
diagram.
4.5
Draw velocity triangles
4.6
List the various blade angles
4.7
Derive formula for work done, axial thrust, energy lost, power and
efficiencies.
4.8
State the necessity of compounding a turbine.
4.9
Describe the methods of reducing rotor speeds with the help of legible
sketch (3 compounding methods)
4.10 Explain the working principle of Parsons Reaction Turbine with a line
diagram.
4.11 Velocity triangle for Parsons reaction turbine.
4.12 Simple problems on Single stage Impulse turbines (without blade friction)
and reaction turbines (including data on blade height)
4.13 Define the terms bleeding & reheating.
4.14 State the necessity of governing a turbine
4.15 Explain the methods of turbine governing
5.0
Understand the Working of Steam Condensers

5.1
Define the Steam condenser
V-13
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
5.10
5.11
5.12
5.13
5.14
5.15
5.16
5.17
5.18
State the functions of steam condenser

Classify the condensers
Explain the working principle of Low level counter Flow and Parallel
Flow jet condensers with legible sketch
Explain the working principle of High level Jet condenser with legible
Sketch
List the Advantages and Disadvantages of High- Level Jet condenser
Explain the working principle of Ejector condenser with legible
Sketch
Explain the working principle of Shell and Tube Surface condenser with
Legible sketch
Distinguish between down flow and central flow surface condenser
Explain the working principle of Evaporative condenser with legible
Sketch
List the Advantages and Disadvantages of Surface condenser
Distinguish between Jet Condenser and Surface Condenser
Write the Formulae for cooling water required, Condenser efficiency,
Corrected vacuum, absolute pressure and Vacuum efficiency
Solve Simple problems on Steam condensers to Estimate the Cooling
water required, Condenser efficiency and Vacuum efficiency
Define Air Extraction
List the types of Air Extraction systems
Distinguish between Dry-air Extraction and Wet-air Extraction systems
Explain the working principle of Air pump and Steam Jet Air Ejector
with legible sketch
COURSE CONTENT
1.0
Properties of steam.
1.1
Formation of steam under constant pressure, dryness, fraction and
degree of superheat, specific volume.
1.2
Determination of enthalpy, internal energy, internal latent heat, entropy of
wet, dry and superheated steam at a given pressure using steam tables
and Mollier chart.
1.3
Simple direct problems on the above using tables and charts.
1.4
Vapour processes simple problems using tables and charts.
1.5
Steam calorimeters Separating, throttling, Combined Separating and
throttling calorimeters problems.
2.0
Steam Boilers.
2.1
Function and use of steam boilers.
2.2
Classification of steam boiler with examples.
2.3
Brief explanation with line sketches of Cochran and Babcock Wilcox
Boilers.
2.4
Comparison of water tube and fire tube boilers.
2.5
Description with line sketches and working of modern high pressure
boilers Lamont and Benson boilers.
2.6
Brief explanation with line sketches of boiler mountings namely, pressure
gauge, water level indicator, fusible plug, blow down cock, stop valve,
safety valve (dead weight type, spring loaded type, high pressure and low
water safety alarm).
V-14
2.7
2.8
2.9
2.10
2.11
2.12
Brief explanation with line sketches of boiler accessories such as feed

pump, economiser, super heater and air pre-heater only.
Study of steam traps & separators.
Explanation of the terms : Actual evaporation, equivalent evaporation,
factor of evaporation, boiler horse power and boiler efficiency.
Formula for the above terms without proof.
Simple direct problems on the above.
Draught systems (Natural, forced & induced).
3.0
Steam Nozzles
3.1
Flow of steam through nozzle.
3.2
Velocity of steam at the exit of nozzle in terms of heat drop by analytical
and mollier diagram.
3.3
Discharge of steam through nozzles.
3.4
Critical pressure ratio.
3.5
Methods of calculation of cross sectional areas at throat and exit for
maximum discharge.
3.6
Effect of friction in nozzles and Super saturated flow in nozzles.
3.7
Working steam jet injector.
3.8
Simple problems of nozzles.
4.0
Steam Turbines
4.1
Classification of steam turbines with examples.
4.1
Difference between impulse & reaction turbines.
4.3
Principle of working of a simple De-lavel turbine with line diagrams.
4.4
Velocity diagrams.
4.5
Expression for work done, axial thrust, tangential thrust, blade and
diagram efficiency, stage efficiency, nozzle efficiency.
4.6
Methods of reducing rotor speed compounding for velocity, for pressure
or both pressure and velocity.
4.7
Working principle with line diagram of a Parsons Reaction turbine
velocity diagram.
4.8
Simple problems on single stage impulse turbines (without blade friction)
and reaction turbine including data on blade height.
4.9
Bleeding, re-heating and re-heating factors (Problems omitted).
4.10 Governing of steam turbines : Throttle, By-pass & Nozzle control
governing.
5.0
Steam Condensers
5.1
Steam condenser ,its functions, Classifications
5.2
Low level counter Flow and Parallel
Flow jet condensers, High level Jet condenser and Ejector condenser,
Advantages and Disadvantages of High- Level Jet condenser
5.3
Shell and Tube Surface condenser, Down flow, Central flow Surface
Condenser and Evaporative condenser, Advantages and Disadvantages
of Surface condenser
5.4
The Formulae for cooling water required, Condenser efficiency,
Corrected vacuum, Absolute pressure and Vacuum efficiency
5.5
Simple problems on Steam condensers to Estimate the Cooling water
Required, Condenser efficiency and Vacuum efficiency
V-15
5.6
Air Extraction, Types of Air Extraction systems, Dry-air Extraction and

Wet-air Extraction systems, Air pump and Steam Jet Air Ejector
REDERENCE BOOKS
1. Thermodynamics
2. Elements of Heat Engines Volume II
3. Thermal Engineering
by
by
by
by
by
V-16
Ballaney
R.C. Patel & Karamchandani
Arora & S. Domkundwar
Roy & Sarao
Vasandani & Kumar
FLUID POWER SYSTEMS

Subject Title
Subject Code
Periods/Week
:
:
:
:
Fluid Power Systems

ME-505
04
60
TIME SCHEDULE
S No.
Major Topics
No. of
Periods
Weightage
of Marks
Short
Answer
Questions
Essay
Type
Questions
Fluid power
06
13
01
01
Circuit devices
12
26
02
02
Pneumatics
20
42
04
03
12
16
02
01
10
13
01
01
60
110
10
08
4
5
Hydro - Pneumatic
systems
Hydro Pneumatic
measurements
Total
OBJECTIVES
1.0
Understand the concept of Fluid power

1.1
Explain the meaning of fluid power
1.2
List the various applications of fluid power
1.3
List the basic components of the fluid power system
1.4
Appreciate the use of Hydraulic control system
1.5
State merits and demerits of hydraulic control system.
1.6
State the essential components of hydraulic circuits and their functions.
1.7
List types of Hydraulic pumps
1.8
List the types of Hydraulic Motors.
1.9
Explain the function of hydraulic pump and motor
2.0
Understand the Working of Circuit devices

Hydraulic Intensifier
2.1
State the purpose of intensifier
2.2
Explain the principal of working of intensifier with a legible sketch
2.3
List the types of accumulators.
2.4
List the types of hydraulic cylinders
2.5
Explain the construction and working principle of double acting hydraulic
cylinder
2.6
Write the expressions for force, velocity and power for hydraulic cylinder
2.7
Select intensifiers and accumulators for specific application.
2.8
Explain the principle of Hydraulic Jack with a legible sketch
2.9
Explain the principle of Hydraulic crane with a legible sketch
V-17
Hydraulic control valves - Directional

2.10 State the function of control valve
2.11 Classify the control valves
2.12 State the functions of Directional control valves
2.13 Classify the directional control valves
2.14 Explain the construction and working principle of directional control valve
2.15 Draw the graphic symbols of directional control valves
2.16 Explain the different applications of directional control valves
2.17 Explain the working principle of solenoid-actuated valve with a legible
Sketch
2.18 Define the valve overlap
Pressure control valves
2.19 State the functions of Pressure control valves
2.20 Classify the Pressure control valves
2.21 Explain the construction and working principle of pressure control valve
2.22 Draw the graphic symbols of pressure control valve
2.23 Explain the different applications of pressure control valves
Flow control valves
2.24 State the functions of Flow control valves
2.25 Classify the Flow control valves
2.26 Explain the construction and working principle of flow control valve
2.27 Draw the graphic symbols of flow control valve
2.28 Explain the different applications of Flow control valves
2.29 Explain the working of bleed-off circuits
Oil Reservoirs
2.30 State the functions of oil reservoir
2.31 Identify the elements of a Fluid Reservoir
2.32 Explain the purpose and types of filters
2.33 Explain the purpose of seals and packings.
2.34 Identify the different types of seals and packings.
3.0
Understand the concept of Pneumatics

Pneumatic Power Unit
3.1
Explain the meaning of pneumatic circuits
3.2
State the elements of pneumatic circuits
3.3
State the areas of application of pneumatic power unit
3.4
Compare with hydraulic power unit
3.5
Identify different symbols used for pneumatic circuit
3.6
Draw the pneumatic circuit diagram.
3.7
Classify the compressors.
3.8
Explain the working of Regulator, Filter and Lubricator (R-F-L)
Pneumatic circuit valves
3.9
Explain the function of circuit valves.
3.10 Explain the different methods of actuation of valves.
3.11 Describe the direction control valves Spool type.
Air Cylinders
3.12 List the types of air cylinders
3.13 Explain the factors pertaining to installation and maintenance of Air
cylinders
3.14 List the applications of Air cylinders
V-18
Pneumatic Circuits
3.16 Explain the principle of working of power operator holding devices.
3.17 Explain the pneumatic safety circuits.
3.18 Explain the meaning of Remote control
3.19 Describe the components of Remote control system.
3.20 Explain different Remote control valves and switches.
4.0
Understand the concept of Hydro Pneumatic Systems

4.1
Explain the advantages and applications of combined air and oil systems.
4.2
Explain the principle of combination system.
4.3
Explain the methods of combining the hydraulic cylinder to Air cylinder.
4.4
Explain the principle of Air controlled hydraulic valve with a legible sketch
4.5
Describe the use of air as cushion for hydraulics system with a legible
sketch
5.0
Understand the concept of Hydro Pneumatic measurements

5.1
Illustrate the working of flow meter (Mechanical Type) with a legible
sketch
5.2
Illustrate the working of flow meter (Electro Magnetic Type) with a legible
sketch
5.3
Illustrate the working of flow meter (Ultrasonic) with a legible sketch
5.4
Illustrate the working of Air gauge with a legible sketch
COURSE CONTENT
1.0 Fluid Power
1.1
The meaning of fluid power
1.2
The various applications of fluid power
1.3
The basic components of the fluid power system
1.4
The use of Hydraulic control system
1.5
The merits and demerits of hydraulic control system.
1.6
The essential components of hydraulic circuits and their functions.
1.7
The types of Hydraulic pumps
1.8
The types of Hydraulic Motors.
1.9
The function of hydraulic pump and motor
2.0 Circuit devices
Hydraulic Intensifier
2.1
The purpose of intensifier
2.2
The principal of working of intensifier with a legible sketch
2.3
The types of accumulators.
2.4
The types of hydraulic cylinders
2.5
The construction and working principle of double acting hydraulic cylinder
2.6
The expressions for force, velocity and power for hydraulic cylinder
2.7
The Selection of intensifiers and accumulators for specific application.
2.8
The principle of Hydraulic Jack with a legible sketch
2.9
The principle of Hydraulic crane with a legible sketch
V-19
Hydraulic control valves - Directional

2.10 The function of control valve
2.11 The control valves
2.12 The functions of Directional control valves
2.13 Classification of directional control valves
2.14 The construction and working principle of directional control valve
2.15 The graphic symbols of directional control valves
2.16 The different applications of directional control valves
2.17 The working principle of solenoid-actuated valve with a legible Sketch
2.18 Definition of the valve overlap
Pressure control valves
2.19 The functions of Pressure control valves
2.20 Classification of Pressure control valves
2.21 The construction and working principle of pressure control valve
2.22 The graphic symbols of pressure control valve
2.23 The different applications of pressure control valves
Flow control valves
2.24 The functions of Flow control valves
2.25 Classification the Flow control valves
2.26 The construction and working principle of flow control valve
2.27 The graphic symbols of flow control valve
2.28 The different applications of Flow control valves
2.29 The working of bleed-off circuits
Oil Reservoirs
2.30 The functions of oil reservoir
2.31 Identification of elements of a Fluid Reservoir
2.32 The purpose and types of filters
2.33 The purpose of seals and packings.
2.34 Identification of different types of seals and packings.
3.0 Pneumatics
Pneumatic Power Unit
3.1
The meaning of pneumatic circuits
3.2
The elements of pneumatic circuits
3.3
The areas of application of pneumatic power unit
3.4
Comparison with hydraulic power unit
3.5
Identification of different symbols used for pneumatic circuit
3.6
The pneumatic circuit diagram.
3.7
Classification of compressors.
3.8
Explanation of working of Regulator, Filter and Lubricator (R-F-L)
Pneumatic circuit valves
3.9
Explanation of function of circuit valves.
3.10 Explanation of different methods of actuation of valves.
3.11 The direction control valves Spool type.
Air Cylinders
3.12 The types of air cylinders
V-20
3.13
3.14
3.15
Function of Air cylinder Tube, Cover, Packing gland, Cushion assembly,

Piston and Piston seal.
Explanation of factors pertaining to installation and maintenance of Air
cylinders
The applications of Air cylinders
Pneumatic Circuits
3.17 Explanation of principle of working of power operator holding devicesLever clamp, Toggle clamp, Power vice, Mandrels, Collets and chucks.
3.18 Explanation of pneumatic safety circuits for a) Protection against pressure
drop, b) Protection against overload
3.19 Explain the meaning of Remote control
3.20 The components of Remote control pneumatic system Pilot operated
valves, Solenoid valves, and Cam operated valves
3.21 Explain different Remote control valves and switches.
4.0 Hydro Pneumatic Systems
4.1
The principle of combination system.
4.2
The advantages and applications of combined air and oil systems
4.3
The methods of combining the hydraulic cylinder to Air cylinder
4.4
The principle of Air controlled hydraulic valve with a legible sketch
4.5
The use of air as cushion for hydraulics system with a legible sketch
5.0 Hydro Pneumatic Measurements
5.1
Illustratation of working of flow meter (Mechanical Type) with a legible
sketch
5.2
Illustratation of working of flow meter (Electro Magnetic Type) with a
legible sketch
5.3
Illustratation of working of flow meter (Ultrasonic) with a legible sketch
5.4
Illustratation of working of Air gauge with a legible sketch
REFERENCE BOOKS:
1.
2.
3.
4.
5.
6.
7.
Pneumatics by SRIHARI RAO

Pneumatic controls by FESTO
Fluid Power Pneumatics by ALAN H. JOHN
Pneumatics by FLIPPO
Pneumatics By TTI
Hydraulics & Pneumatics by RAY & RAO
Fluid Power & Pneumatics by AUDEL Series
V-21
MACHINE TOOL ENGINEERING

Subject Title
Subject Code
Periods Per Week
:
:
:
:
Machine Tool Engineering

ME506
04
60
TIME SCHEDULE
S.No
1
2
3
4
Weightage
of Marks
Machining
Number
of
Periods
16
Essay Type
Questions
29
Short
Answer
Questions
03
processing
16
26
02
02
Press Tools, Jigs and

Fixtures
Jig Boring
20
42
04
03
08
13
01
01
Total
60
110
10
08
Major Topics
Modern
Process
Plastic
02
OBJECTIVES
1.0 Understand the Modern Machining Processes
1.1
Distinguish between non-conventional machining processes and
traditional methods.
1.2
State their relative advantages.
1.3
Explain the principle of working of ultrasonic machining.
1.4
List the equipment used in U.S.M. processes.
1.5
Explain the principle of electric discharge machining with a legible sketch.
1.6
Explain the working of Abrasive jet machining with a legible sketch
1.7
Explain the working of Laser beam machining with a legible sketch
1.8
State the principle of chemical machining.
2.0
Understand the concept of Plastic Processing

2.1
State the principle of manufacturing plastic products.
2.2
Explain the methods of injection moulding, compression moulding,
transfer moulding with legible sketches
2.3
Explain the principle of extruding, casting and calendaring with legible
sketches
2.4
State the principle of machining and welding plastics
2.5
Explain the different fabrication methods Sheet forming, Blow moulding,
Laminating and Reinforcing
2.6
List Engineering applications of plastics
V-22
3.0
Understand the use of Press Tools, Jigs and Fixtures

3.1
Explain the Importance of Press Tools
3.2
Classify presses based on power and design of frame.
3.3
Explain the constructional details of a power press with the help of a
legible sketch
3.4
State the meaning of Press size.
3.5
Explain Press Tools Punch and die.
3.6
Explain Die-clearance and Die Accessories
3.7
Explain shear action in die cutting operation Punch and die clearances,
Angular clearance, centre of pressure, cutting forces.
3.8
Explain various press working operations.
3.9
Explain different types of dies.
3.10 List various die operations
3.11 List types of jigs and explain their constructional details with the help of
legible sketches
3.12 State general considerations in design of drill jigs
3.13 State the function of drill bush.
3.14 List different types of fixtures and explain their constructional
details with the help of legible sketches.
3.15 Differentiate between jigs and fixtures.
3.16 List the advantages of Jigs and Fixtures
3.17 Explain basic principle of location.
3.18 Identify different locating methods and devices.
3.19 Explain the basic principle of clamping.
3.20 Identify different types of clamps and their constructional details
with the help of legible sketches

4.0
Understand the process of Jig Boring

4.1
List the situations where jig-boring machines are needed.
4.2
State the principle of working of a jig boring machine.
4.3
Explain the process of button boring on lathes.
4.4
Classify the jig boring machines.
4.5
Explain the constructional details of open front machine and
cross rail type machine with the help of legible sketches.
4.6
Explain the function of above machines.
4.7
Describe the systems of location of holes.
COURSE CONTENT
1.0
Modern Machining Processes.
Introduction comparison with traditional machining.
Ultrasonic machining- Principle Description of equipment - applications.
Electric Discharge Machining - Principle Description of equipment
Type of EDM Processes - applications.
Abrasive jet machining - principle - description of equipment application.
Laser beam machining - principle - description of equipment- application.
Chemical machining Principle description of equipment - Applications.
2.0
Plastics Processing.
Processing of plastics - Injection moulding - Compression moulding Transfer moulding Extruding - Casting - Calendaring
Fabrication methods -Sheet forming methods, Blow moulding -
V-23
Laminating plastics (sheets, rods & tubes) - Tool angles for machining
Plastics - Coolants used in machining of plastics - Applications of Plastics
3.0
Press Tools, Jigs and Fixtures:

Introduction - Types of Presses hand, power, gap, inclinable,
adjustable, horn, straight side, pillar presses.
Constructional details of a power press - Press size.
Press Tools Punch and die
Die Accessories Stops, Pilots, strippers, Knock outs, pressure pads.
Shear action in die cutting operation punch and die clearance and
angular clearance, centre of pressure, cutting forces.
Press working operations: blanking, piercing and forming, lancing, cutting
off and parting, notching, shaving, trimming, embossing, beading and
curling, bulging, twisting, coining, swaging, hole flanging or extruding
line sketches and meaning of terms.
Sheet metal bending: bending methods, spring back, bend allowance,
bending pressure sketches and empirical formulae.
Types of dies meaning of inverted, progressive, compound and
combination dies.
Material selection for punch and die.
Definition of jig - Types of jigs - leaf jig, box and handle jig, template jig,
plate jig, Indexing jig, Universal jig, vice jigs.
Explain the constructional details of the above jigs.
General consideration in the design of drill jigs
Explain drill bush
Types of fixtures : vice fixtures, milling fixtures, boring fixtures, grinding
fixtures - Explain the constructional details of the above fixtures.
Basic principles of location - Explain the locating methods and devices
Explain the basic principles of the clamping - Types of clamps - strap
clamps, cam clamps, screw clamps, toggle clamps, hydraulic and
pneumatic clamps.
4.0
Jig Boring.
Introduction - Button boring on lathes- Jig boring on vertical milling
machine.
Types jig boring machines - Open front machine - Cross rail type machine
constructional details & their working - System of location of holes.
REFERENCE BOOKS
1.Manufacturing Technology
2.Manufacturing Technology
3.Production Technology
4.Production Technology
5.Tool Design
Hajra Chowdhary Volume I & II

P.N.Rao
Volume II
R.C.Patel
Jain & Gupta.
Donaldson
V-24
CAD PRACTICE
Subject Title
Subject Code
Periods per week
Period per semester
:
:
:
:
CAD Practice
ME507
06
90
TIME SCHEDULE
Sl No.
Major Topics
1.
Introduction to CAD
03
2.
Selecting commands & Working with drawing
06
3.
Viewing drawing
03
4.
Working with coordinates
03
5.
Creating simple and complex entities
06
6.
Getting Drawing information
06
7.
Modifying entities
06
8.
Working with text
03
9.
Dimensioning drawing
03
10.
2D Drawing
21
11.
Layers
03
12.
Isometric views
06
13.
Working with blocks
03
14.
Printing drawing
03
15.
3D Drawings
15
TOTAL
OBJECTIVES
1.0
No. of
periods
Understand about the Computer Aided Drafting and its software

1.1
Define Computer Aided Drafting
1.2
List the Advantages of CAD
1.3
Explain the importance of CAD software
1.4
Explain the features of Graphic Work station
1.5
Use CAD Environment: Screen, Various tool bars and menus.
V-25
90
2.0
3.0
4.0
5.0
6.0
Use appropriate selection commands

2.1
Practice commands using toolbars, menus, command bar
2.2
Practice repeating a command, Nesting a command and modifying
a command
2.3
Use prompt history window and scripts
2.4
Practice mouse shortcuts
2.5
Practice the Creating the drawing, Opening existing and damaged
Files, saving the drawing
2.6
Practice the setting up a drawing
2.7
Practice the setting and changing the grid and snapping alignment
2.8
Practice the Entity snaps
Use Viewing tools of CAD
3.1
Practice the use of Scroll bar, pan command, and rotating view to
move around within drawing
3.2
Practice the changing of magnification of drawing
3.3
Practice the displaying of multiple views
3.4
Practice the use of controlling visual elements like Fill, Text, Blips
and Line weight
Use coordinate systems of the drawing
4.1
Practice how the coordinate system work
4.2
Practice how the coordinate system displayed
4.3
Practice the Find tool to determine the coordinates of a point
4.4
Practice the Two dimensional coordinates such as Absolute
Cartesian, Relative Cartesian and Polar coordinates
4.5
Practice the use of right-hand rule
4.6
Practice the how to enter into x, y, z - coordinates
4.7
Practice the Three dimensional coordinates such as Spherical and
Cylindrical coordinates
4.8
Practice the use of filters in two and three dimensions
4.9
Practice the defining user coordinate system
4.10 Practice the use of present user coordinate system
Create the simple and complex entities
5.1
Draw the lines, circles, arcs, ellipses, elliptical arcs, rays and infinite lines
5.2
Practice the Creation of point entities
5.3
Practice the Editing of point entities
5.4
Draw the complex shapes like rectangles, polygons, polylines,
Splines, donuts, planes
5.5
Practice the adding of hatch pattern
Use the drawing information retrieving tools Measure, Divide,
Calculate, Display, and Track
6.1
Measure the intervals on entities
6.2
Divide the entities in to segments
6.3
Calculate the areas defined by points, of closed entities, and
Combined entities
6.4
Calculate the distance between the entities
6.5
Calculate the angle between the entities
6.6
Display the information about the entities and drawing status
V-26
6.7
Track time spent working on a drawing
7.0
Use the Modifying tools to modify the properties of entities

7.1
Practice the entity selection and deselection methods
7.2
Practice the Deletion of entities
7.3
Practice the Copying of entities within a drawing, between drawings
7.4
Practice the making of parallel copies, Mirroring entities and
Arraying entities
7.5
Practice the Rearranging of entities by Moving, Rotating and
Reordering
7.6
Practice the Resizing of entities by Stretching, Scaling, Extending,
Trimming, and Editing the length
7.7
Practice the Braking and joining of entities
7.8
Practice the creating, modifying the groups and ungrouping of
Entities
7.9
Practice the Editing of polylines: Opening, Closing, Curving, Decurving,
Joining, Changing width and editing vertices
7.10 Practice the Exploding of entities
7.11 Practice the Chamfering and Filleting of entities
8.0
Use the Text tool to create and formatting the various types of text
fonts and its styles
8.1
Practice the creating, naming and modifying the text fonts
8.2
Practice the Creation of line text, paragraph text
8.3
Practice the Setting of line text style and its alignment
8.4
Practice the Setting of Paragraph text style and its alignment
8.5
Practice the Changing of line text and Paragraph text
8.6
Practice the use of alternate text editor
9.0
Use Dimensioning concepts to create dimensions, Edit dimensions,

Control dimension styles & variables and Adding geometric tolerances
9.1
Practice the creating of linear, Angular, Diametral, Radial, Ordinate
dimensions
9.2
Practice the creating leaders and annotations
9.3
Practice the making dimensions oblique
9.4
Edit the dimension text
9.5
Practice the Controlling of dimension arrows and format
9.6
Practice the Controlling of line settings and dimension text
9.7
Practice the Controlling of dimension units, and dimension tolerance
10.0
Create 2D Drawings
10.1 Create 2D drawings of standard mechanical components
11.0
Organize the information on layers

11.1 Practice the setting a current layer, layers color, line type, line
weight, print style
11.2 Practice the locking and unlocking of layers
11.3 Practice the layer visibility and layer printing
11.4 Practice the setting of current line type
11.5 Practice the loading of additional line types
11.6 Practice the creating and naming of line type
V-27
11.7
Practice the editing of line type
12.0
Create Isometric Views

12.1 Create Isometric views of simple objects
13.0
Use the Blocks, Attributes and External references to manage the

Drawing
13.1 Define a block
13.2 Explain the purpose of a block
13.3 Practice the creating a block
13.4 Practice the inserting a block
13.5 Practice the redefining a block
13.6 Practice the exploding a block
13.7 Define an Attribute
13.8 Practice the editing attribute definitions
13.9 Practice the attaching attribute to blocks
13.10 Edit attributes attached to blocks
13.11 Extract attributes information
13.12 Define external reference
13.13 Practice the Attaching, Removing, and Reloading of external
references
13.14 Practice the Binding, Clipping and changing the path of external
References
14.0 Use Layouts, Layout view ports, and customizing printing

in CAD
14.1 Define layout for printing
14.2 Understand the layouts
14.3 Practice the viewing of drawings in paper and model space
14.4 Display the model and layout tabs
14.5 Create the new layout
14.6 Reuse the layouts from other files
14.7 Manage the layouts in a drawing
14.8 Define layout view ports
14.9 Create layout view ports
14.10 Practice the viewing and scaling of layout view ports
14.11 Modify the layout viewports
14.12 Select the appearance of print dialog
14.13 Set the paper size and orientation
14.14 Select a printer or a plotter
14.15 Set the scale and view
14.16 Choose how line weight print
15.0
3D Drawings
15.1 Explain the concept of 3D
15.2 Create 3D solids using solid tool bar options
15.3 Create 3D Drawings of Standard Mechanical Components
15.4 Practice Rendering
V-28
KEY competencies to be achieved by the student

S.No
Experiment Title
1.
Introduction to CAD
2.
Selecting
drawing
3.
Viewing drawing
commands
&
Working
with
4.
Working with coordinates
5.
6.
Getting Drawing information
9.
Dimensioning drawing
10.
2D Drawings
12.
Isometric Views
V-29
Key Competency
Open/close Autocad program
Understands Autocad Graphic User
Interface(GUI) and various toolbars
Use prompt history window and scripts
Practice the setting up a drawing
Practice the Entity snaps
Use Scroll bar, pan command, and
rotating view to move around within
drawing
Control visual elements like Fill, Text,
Blips and Line weight
Use Two dimensional coordinates and
Three dimensional coordinates
Use right-hand rule
Use filters in two and three dimensions
Define user coordinate system
Draw the simple shapes like lines, circles,
arcs and complex shapes like polygons,
planes etc.,
Practice the adding of hatch pattern
Measure the intervals and distance
between entities
Divide the entities in to segments
Calculate the areas defined by points, of
closed entities, and Combined entities
Create linear, Angular, Diametral, Radial,
Ordinate dimensions
Practice the making dimensions oblique
Edit the dimension text
Practice the Controlling of dimension
units, and dimension tolerance
Use proper 2D commands to create 2D
drawings
Use Iso snap command to create
Isometric views
S.No
Experiment Title
Key Competency
Create , insert and explode a block
Attach attribute to blocks
Edit and extract attributes attached to
blocks
Display the model and layout tabs
13.
14.
15.
Working with blocks
Printing drawing
Create the new layout and Manage the

layouts from other files
Practice the viewing, scaling

Modifying of layout view ports
Set the paper size, orientation, scale,

view and line weight to print
Region 2D Drawings
Use proper 3D commands to create 3D
drawings
3D Drawings
COURSE CONTENT
1.0
The Computer Aided Drafting and its software

Definition of Computer Aided Drafting, the Advantages and importance of
CAD software ,The features of Graphic Work station, CAD Environment:
Screen, Various tool bars and menus.
2.0
Selection of commands
Commands using toolbars, menus, command bar
Repeating a command, Nesting a command and modifying a command
Use of prompt history window and scripts, mouse shortcuts
Creating the drawing, Opening existing and damaged files, saving of
drawing, setting up a drawing
Setting and changing the grid and snapping alignment, the Entity snaps
3.0
Use of viewing tools of CAD

Use of Scroll bar, pan command, and rotating view to move around within
drawing, changing of magnification of drawing
Displaying of multiple views, the use of controlling visual elements like Fill,
Text, Blips and Line weight
4.0
Use of coordinate systems of the drawing

Two dimensional coordinates such as Absolute, Cartesian, Relative
Cartesian and Polar coordinates, the use of right-hand rule,
Three dimensional coordinates such as Spherical and Cylindrical
Coordinates, the use of filters in two and three dimensions, Defining user
Coordinate system
V-30
and
5.0

Drawing of lines, circles, arcs, ellipses, elliptical arcs, rays and infinite
lines, Creating and editing of point entities
Drawing of complex shapes like rectangles, polygons, polylines,
Splines, donuts, planes, and adding of hatch pattern
6.0
Use the drawing information retrieving tools Measure, Divide,

Calculate, Display, and Track
Measuring the intervals on entities, dividing the entities in to segments
Calculation of areas of defined by points, closed entities, and combined
Entities, calculate the distance and angle between the entities
Displaying the information about the entities and drawing status
Tracking time spent working on a drawing.
7.0
Use the Modifying tools to modify the properties of entities

Entity selection and de selection methods, the Deletion of entities
Copying of entities within a drawing, between drawings, parallel copies,
Mirroring entities and Arraying entities
The Rearranging of entities by Moving, Rotating and Reordering
The Resizing of entities by Stretching, Scaling, Extending, Trimming, and
Editing the length
The Braking and joining of entities,The creating, modifying the groups and
ungrouping of Entities
Editing of polylines: Opening, Closing, Curving, Decurving, Joining,
Changing width and editing vertices,
The Exploding of entities, the Chamfering and Filleting of entities
8.0
Use the Text tool to create and formatting the various types of text
Fonts and its styles
The creating, naming and modifying the text fonts, the Creation of line
text, paragraph text, setting of line text style and its alignment
The Setting of Paragraph text style and its alignment, the Changing of line
text and Paragraph text, the use of alternate text editor
9.0
Use Dimensioning concepts to create dimensions, Edit dimensions,

Control dimension styles & variables and Adding geometric tolerances
The creating of linear, Angular, Diametral, Radial, Ordinate dimensions
The creating leaders and annotations, making dimensions oblique,
Editing the dimension text, controlling of dimension arrows and format
The Controlling of line settings and dimension text, the Controlling of
dimension units, and dimension tolerance
10.0
2D Drawings
Using appropriate commands creation of 2D drawings of standard
mechanical components
11.0
Organize the information on layers

Setting a current layer, layers color, line type, line Weight, print style
Locking and unlocking of layers, the layer visibility and layer printing
Setting of current line type, the loading of additional line types, creating
and naming of line type, editing of line type
V-31
12.0
Isometric Views
Create Isometric views of simple objects
13.0
Use the Blocks, Attributes and External references to manage the

Drawing Blocks
The purpose of a block, creating a block, inserting a block, redefining a
block, exploding a block
Attribute
Editing attribute definitions, attaching attribute to blocks
Editing attributes attached to blocks, Extracting attributes information
External reference
Attaching, Removing, and Reloading of external references
The Binding, Clipping and changing the path of external references
14.0
Use the Layouts, Layout view ports, and customizing printing

in CAD layout for printing
Layouts, Viewing of drawings in paper and model space, Displaying of
model and layout tabs, creating the new layout, Reuse the layouts from
other files, Manage the layouts in a drawing
Define layout view ports
Create layout view ports
Practice the viewing and scaling of layout view ports, Modify the layout
viewports,
Select the appearance of print dialog
Setting the paper size and orientation, selecting a printer or a plotter
Setting the scale and view, choosing line weight
15.0
3D Drawings
3D drawings of standard components
Rendering of 3D images
REFERENCE BOOKS
4MCAD User Guide- IntelliCAD Technology Consortium (WWW.intellicad.org)
4MCAD Software:
1. 4MCAD Viewer,
2. 4MCAD Classic,
3. 4MCAD Standard,
4. 4MCAD Professional.
V-32
LIFE SKILLS
(Common to all branches)
Subject Title
Subject Code
Periods per week
Period per semester
:
:
:
:
Life skills
ME 508
03
45
TIME SCHEDULE
No. of periods
Sl No.
Major Topics
Theory
1.
Concept of life skills
03
2.
Enhancing self esteem
01
3.
Goal setting
01
4.
Positive attitude
01
5.
Managing emotions
1 1/2
6.
Stress management
1 1/2
7.
Time management
1/2
8.
Interpersonal skills
01
9.
Creativity
01
10.
Problem solving and Decision making

skills
01
11.
Assertiveness
1 1/2
12.
Leadership skills &Team spirit
1 1/2
TOTAL
Practical
15 1/2
00
03
02
03
02
03
02
03
4 1/2
06
4 1/2
06
2 1/2
03
02
03
02
03
02
03
4 1/2
06
11/2
03
29 1/2
45
Note: No Written Examination

The students may be asked to Demonstrate 1 or 2 skills from unit 2 to unit 12.
Marks: Internal 40; External - 60
OBJECTIVES
Upon the completion of the course the student shall be able to
1.0
Understand the concept of life skills
1.1
Define Life skills
1.2
Explain need and impact of Life skills programme
1.3
List the elements of Life skills
1.4
Identify the sources of Life skills
V-33
Total
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
Understand the concept of Self esteem

Define the term self esteem
Explain the concept of self esteem
List the characteristics of High self esteem
List the characteristics of Low self esteem
Explain the advantages of High self esteem
Explain the behavior patterns of low self esteem
Explain the causes of Low self esteem
List the steps to build a positive self esteem
Practicals
Exp
No
1.
2.
3.0
Activity (Questionnaire / Game and Role

play)
Identifying the behavior patterns of low

Identifying the Behavior
self-esteem people.
Practice Positive Self Steps to build a positive self esteem
Esteem
Understand the concept of Goal setting

3.1
Define the term Goal
3.2
Explain the significance of Goal setting
3.3
Explain the following concepts
a) Wish b) Dream c) Goal
3.4
Explain the reasons for not setting goals
3.5
Explain the effective goal setting process
3.6
List the barriers to reach goals
Practicals
Exp
No
4.0
Exercise
Exercise
Differentiate among
Wish, Dream and Goal
Activity
Drawing a picture of Your Self/ Your
Country/ Your Society after 10yrs.
Discussion: Setting Personal Goals
Story Telling
Identifying of barriers
Analysis of barriers
Overcoming Barriers
Practice positive attitude

4.1
Define Attitude
4.2
Explain the concept of positive attitude
4.3
Explain the concept of negative attitude
4.4
Explain the affects of negative attitude
4.4
Identify the attitude of self and peers
4.5
Explain the effect of peers on self and vice-versa.
4.6
List the steps to enhance positive attitude
4.7
Explain the strategies to enhance positive attitude
V-34
Practicals
Exp
No
1.
2
3
5.0
Activity (Psychological Instrument/ Game & Role

play)
Identify Positive attitude
To study & to identify the attitude of self and
peers.
List & practice the strategies to enhance
positive attitude.
Observe
Positive attitudes of self and Peers
Negative attitudes of self and Peers
Practice
Strategies
to Celebrating the success
enhance Positive attitude
Listing the successes
Practice managing emotions

5.1
Explain the concept of emotion
5.2
List the different types of emotions
5.3
Differentiate between positive and negative emotions
5.4
Identify the type of emotion
5.5
Explain the causes of different types of emotions.
5.6
Implement the methods to manage major emotions ( anger / depression )
5.7
Define Emotional Intelligence.
5.8
Explain the method to enhance emotional Intelligence.
Practicals
Exp
No
1.
2
6.0
Exercise
Exercise
Identify the Type

Emotion
Managing Emotions
Activity (Story / simulated situational act

/GD & Role play)
of To identify the type and to study the
cause of the emotion.
Managing major emotions -Anger and
Depression
Practice stress management skills

6.1
Define Stress
6.2
Explain the concept of stress
6.3
List the Types of stress
6.4
Explain the causes of stress
6.5
Comprehend the reactions of stress
a) Physical b) Cognitive c) Emotional d) Behavioral
6.6
Explain the steps involved in coping with the stress by
a) Relaxation b) Meditation c) Yoga
6.7
Practice the stress relaxing techniques by the 3 methods.
a) Relaxation b) Meditation c) Yoga
6.8
Comprehend the changing personality and cognitive patterns.
6.9
Observe the changing personality and cognitive patterns.
V-35
Practicals
Exp
No
1
2
7.0
Activity(Questionnaire
/Interview
and
practice)
Identify the type of stress
To study & to identify the type and causes
of stress.
Stress
Relaxation
Practice some simple Stress Relaxation
Techniques
Techniques, Meditation, Yoga.
Exercise
Practice Time management skills

7.1
Define Time management.
7.2
Comprehend the significance of Time management.
7.3
Explain the strategies to set priorities.
7.4
List the steps to overcome barriers to effective Time management.
7.5
Identify the various Time stealers.
7.6
Explain the Time-Management skills.
7.7
List different Time-Management skills.
7.8
Comprehend the advantages of Time-Management skills.
Practicals
Exp Exercise
No
1
Identify Time stealers
2.
8.0
Assign a activity to different Groups

Observe the time of accomplishing the
task, Identify the time stealers.
Practice
Time- Perform the given tasks- Games
Management skills
Practice Interpersonal skills

8.1
Explain the significance of Interpersonal skills.
8.2
List the factors that prevent building and
relationships.
8.3
Advantages of positive relationships.
8.4
Disadvantages of negative relationships
Practicals
Exp
Exercise
No
1
Identify Relationships
2.
9.0
Activity ( Group work and Games)
Practice Rapport building
maintaining
positive
Activity
Positive Relationships, Negative
Relationships Factors that affect themThrough a story
Exercises on Rapport building
Developing Correct Body Language
Understand Creativity skills

9.1
Define Creativity
9.2
List the synonyms like Invention , Innovatioin, Novelty
9.3
Distinguish between Creativity , Invention, innovation, and novelty
V-36
9.4
9.5
9.6
9.7
9.8
9.9
9.10
Discuss the factors that lead to creative thinking like observation and
imitation , improvement etc.
Distinguish between Convergent thinking and divergent Thinking
Explain various steps involved in Scientific approach to creative thinking
namely a) Idea generation b) Curiosity c) Imagination d)Elaboration e)
Complexity
f). Abstract ion and simplification g). Divergent Thinking h) Fluency i).
Flexibilty
j).Persistance
k).Intrinsic
Motivation
l).Risk
taking
m).Projection/empathy
n).Originality o). Story telling p). Flow.
List the Factors affecting the creativity in Individuals.
Give the concept of Vertical thinking and lateral thinking.
Explain the importance of Lateral thinking.
Compare lateral thinking and Vertical thinking
Practicals
Exp
Exercise
No
1
Observe any given object
2.
Imagine
3
4
5
10.0
Skills
Product development
Developing originality
Identifying finer details in an object

Imagining a scene
Modifying a story (introduce a twist)
Improving a product
Finding different uses for a product
Making paper craft
Brain storming session
Come up with original solutions for a
given problem
Understand Problem solving and decision making skills

10.1 Define a Problem
10.2 Analyze the performance problems
10.3 Categorize the problems
10.4 List the barriers to the solutions to problems.
Practicals
Exp
No
1
2.
11.0
Activity (Games and Group work)
Activity
(Brainstorming
checklist
technique free association, attribute listing)
Gather the facts and Data Information gathering and organizing
and
Organizing
the Identifying the solutions to the problem
information.
Identifying the barriers to the solutions
Zeroing on Optimum solution
Problem solving
Games on Problem solving
Exercise
Understand Assertive and non Assertive behavior

List the 3 types of Behaviors 1. Assertive 2. Non assertive (passive) 3.
Aggressive behaviour 4.Submissive behaiviors
11.1
V-37
Discuss the personality of a person having above behaviours

Explain the usefulness of assertive behavior in practical situations.
Explain the role of effective communication in reflecting assertive attitude
Give examples of Assertive statements a) Assertive request b) assertive
NO
11.6 Explain the importance of goal setting
11.7 Explain the method of Conflict resolution.
11.8 Discuss the methods of controlling fear and coping up with criticism.
11.2
11.3
11.4
11.5
Practicals
Exercise
Exp
No
1
Observation of behavior
12.0
2.
Practicing assertiveness
Skills
Simulation
Activity ( Simulated situational act)
Identifying different personality traits

from the body language
Write statements
Reaction of individuals in a tricky
situation
Facing a Mock interview
Detailing the characteristics of peers
setting goals Games like throwing a
coin in a circle
Giving a feedback on a )Successful
program b) Failed project
Self disclosure
Dealing with a critic
Saying NO
Dealing with an aggressive person
Role play- skit
1. Assertive statements
2. goal setting
3. self disclosure
Practice Leadership skills

12.1 Explain the concept of leadership
12.2 List the Traits of effective leader
12.3 Distinguish between Managing and leading
12.4
List the 3 leadership styles
12.5 Compare the above styles of leadership styles
12.6 Discuss choice of leadership style
12.7 Explain the strategies to develop effective leadership.
12.8 Explain the importance of Decision making
12.9 Explain the procedure for making effective decisions.
V-38
Practicals
Exp No
1
2.
3
4
Activity ( Games and Group work)
Questionnaire
a Give a task and observe the leader
Discuss the qualities and his /her leadership
style
Ask the other members to identify the
leadership qualities
Reflection on the self
Skills
Decision making followed by discussion
Building Team spirit
Motivation Intrinsic and Extrinsic
Training- Communication- Challenge
Exercise
Observation
Identification
of
Leader
Competencies for Practical Exercises

S.No
Title
1.
Competency
Explain need and impact of Life skills
Follow the steps to build a positive self
esteem
Practice the effective goal setting process
Practice the steps to enhance positive
attitude.
Observe the effects of peers on self and
vice-versa.
Practice the steps to manage emotional
intelligence
Identify different types of emotions
Exercise control over Emotions
2.
3.
Goal setting
4.
Positive attitude
5.
Managing emotions
6.
Stress management
Practice stress management techniques
7.
Time management
Practice Time management techniques
8.
Identify positive and Negative Relations
9.
Creativity
10.
Problem solving and decision

making skills
Lead a small group for accomplishment of

a given task.
Build positive relationships.
Identify the various Problem solving and
decision making skills
Make appropriate Decision
Practice Assertive and non Assertive
behavior
Exhibit Leadership skills
11.
12.
Assertive and non Assertive

behavior
Leadership skills
V-39
COURSE CONTENT
1.0

Definition of life skills, Need and impact of life skills programme
2.0

Concept, Characteristics of high and low self esteem people, Advantages of high
self
esteem, Causes of low esteem- Identification of behavior patterns of low self
esteem Practice session of Questionnaire / Game -Steps to build a positive self
esteem Practice session of Role play
3.0
Goal setting
Significance of goal setting,Concepts of Wish, Dream, and Goal Identify Wish,
Dream, and Goal and differentiate among them Reasons for not setting the
goals, Barriers to reach goals,Identify Barriers Effective goal setting process &
Practice Effective goal setting
4.0
Positive attitude
concept ,affects of negative attitude,attitude of self and peers,effect of peers on
self and
vice-versa, steps to enhance positive attitude,strategies to
enhance positive attitude
Managing emotions
Problem-definition, performance problems ,Categorize the problems,
barriers to the solutions to problems.
5.0
6.0
Stress management
concept of stress, Types of stress, causes of stress, reactions of stress, coping
with the
stress, stress relaxing techniques, changing personality and
cognitive patterns
7.0
Time management
Definition, significance of various Time stealers, Time management, strategies to
set
priorities, steps to overcome barriers, Time-Management skills- its
advantages.
8.0
Significance of Interpersonal skills,positive relationships- Advantages, negative
relationships- Disadvantages
9.0
Creativity
Definition, Invention, Innovation, Novelty,creative thinking , observation and
imitation ,
improvement,Expertise ,skill, and motivation, components of
Creativity ,Convergent
thinking and divergent Thinking, various steps
involved in Scientific approach to creative thinking namely , Factors affecting
the creativity in Individuals, Vertical thinking and
lateral thinking.
10.0
Problem solving and decision making skills

Definition,
performance problems analysis, categorizing,barriers to the
solutions to problems.
V-40
11.0
Assertive and non Assertive behavior

Types of Behaviors their characteristics, need for controlling and avoiding
aggressive behaviors, making and refusing an assertive request their
evaluation, importance of goal setting, method of giving feed back.
12.0
Leadership skills
Concept , importance, Role of a Leader in an Organization, Traits of effective
leader, Managing and leading, leadership styles-their Comparison, theories of
leadership, strategies to develop effective leadership, importance of Decision
making, concept of ethical leadership and moral development.
REFERENCES
1.Robert NLussier, Christopher F. Achua Leadership: Theory, Application, & Skill
development: Theory, Application.
V-41
HYDRAULICS & PNEUMATIC LABORATORY PRACTICE

Subject Title
Subject Code
Periods/Week
Periods/Semester
S. No.
1.
2.
3.
4.
5.
6.
7.
:
:
:
:
Hydraulics & Pneumatics Laboratory

ME-509
03
45
TIME SCHEDULE - Hydraulics Lab (ME 509 A)

Major Components
No. of Periods
Venturimeter
03
Pipe Friction
03
Pelton Wheel
03
Kaplan turbine
03
Francis turbine
03
Reciprocating pump
03
Centrifugal Pump
03
Total
21
OBJECTIVES
Up on Completion of the Lab the student shall be able to:
1.0 Practice the determination of Cd of Venturimeter
1.1 State the practical applications of venturimeter.
1.2 Record the manometric head readings from U-tube manometer
1.3 Record the time taken for collecting discharge by varying the discharge
1.4 Calculate the areas of the pipe and throat of the given venturimeter
1.5 Calculate coefficient of discharge of venturimeter.
2.0 Practice the determination of loss of head in a given pipe
2.1 Measure the length of the given pipe
2.2 Record the manometric head readings from U-tube manometer
2.3 Record the time taken for collecting discharge by varying the discharge
2.4 Calculate the loss of head through the pipe
2.5 Calculate the friction factor
3.0 Practice the determination of Power and Efficiency of Pelton Wheel
3.1 Identify the components of Pelton wheel
3.2 Start turbine by switching on jet of water slowly
3.3 Apply load steadily
3.4 Record load, speed
3.5 Calculate power and efficiency of turbine
4.0 Practice the determination of Power and Efficiency of Kaplan Turbine
4.1
Identify the components of Kaplan Turbine
V-42
4.2
4.3
4.4
4.5
Start turbine by giving input water supply

Apply load steadily
Record load, speed
Calculate power and efficiency of turbine
5.0 Practice the determination of Power and Efficiency of Francis Turbine

5.1
Identify the components of Francis Turbine
5.2
5.3
5.4
5.5
Start turbine by switching on jet of water slowly

Apply load steadily
Record load, speed
Calculate power and efficiency of turbine
6.0 Practice the determination of output Power and Efficiency of Reciprocating

Pump
6.1
Identify the components of reciprocating pump
6.2
Record the suction and delivery pressures from pressure gauges
6.3
Record the time taken for collecting the discharge
6.4
Record the energy meter readings and calculate input power
6.5
Calculate the output power
6.6
Calculate the efficiency
7.0 Practice the determination of output Power and Efficiency of Centrifugal
Pump
7.1
Identify the components of centrifugal pump
7.2
Record the suction and delivery pressures from pressure gauges
7.3
Record the time taken for collecting the discharge
7.4
Record the energy meter readings and calculate input power
7.5
Calculate the output power
7.6
Calculate the efficiency
V-43

Exercise
Calculation of
coefficient of
discharge of
Venturimeter
Determination
pipe friction
Pelton wheel
Kaplan Turbine
Key competency expected

Max. Marks
A. Maintain
constant
A. 2
head
B. 2
B. Record readings of UC. 2
tube
manometer
D. 4
without parallax error
C. Record time taken for
collection of specific
quantity of water
D. Calculate
discharge
and
coefficient
of
discharge
of
venturimeter
E. Repeat experiment for
different
heads
(discharge)
of
A. Ensure flow through
A. 1
pipe is full to remove
B. 2
air bubbles
C. 2
B. Record time taken for
quantity of water in
tank
C. Calculate pipe friction
using formula
A. Start
turbine
by
A. 1
switching on jet of
B. 1
water slowly
C. 2
B. Apply load steadily
D. 3
C. Record load, speed
E. 3
D. Calculate power and
efficiency of turbine
E. Plot
performance
curves
A. Start
turbine
by
A. 1
switching on water
B. 1
supply
C. 2
D. 3
E. 3
E. Repeat experiment by
Varying
load/speed;
Plot
performance
curves
V-44
Marks awarded
Exercise
Francis Turbine
Key competency expected

A. Start
turbine
by
switching on water
supply
E. Repeat experiment by
Varying load/speed;
F. Plot
performance
curves
Reciprocating Pump
A. Maintain steady flow in
suction and delivery
pipes
B. Record suction and
delivery
pressure
gauge readings
C. Record
time
for
quantity
of
water,
electrical meter reading
(input power)
D. Calculate
indicated
power and efficiency
E. Vary the head (flow)
and repeat experiment
Centrifugal Pump
A. Maintain steady flow in
suction and delivery
pipes
B. Record suction and
delivery
pressure
gauge readings
C. Record
time
for
quantity
of
water,
electrical meter reading
D. Calculate
indicated
power and efficiency
E. Vary the head (flow)
and repeat experiment
Max. Marks
A. 1
B. 1
C. 2
D. 2
E. 2
F. 2
Total 10
Marks awarded
A. 1
B. 2
C. 3
D. 2
E. 2
Total 10
A. 1
B. 2
C. 3
D. 2
E. 2
Total 10
COURSE CONTENT
1. Determination of Coefficient of discharge of Venturimeter.
2. Determination of major losses in pipes due to friction.
3. Determination of B.P. and efficiency of Pelton wheel.
4. Determination of B.P. and efficiency of Kaplan turbine.
5. Determination of B.P. and efficiency of Francis turbine.
6. Determination of I.P. and overall efficiency of a reciprocating pump
7. Determination of I.P. and efficiency of the Centrifugal pump
V-45
TIME SCHEDULE - PNEUMATICS LAB (ME 509 B)

Sl No.
Major Topics
No. of
periods
1.
Introduction to Pneumatic components
03
2.
Direct control of a single-acting cylinder
03
3.
Direct control of a double-acting cylinder
03
4.
Speed control of a double-acting cylinder
03
5.
Control of a double-acting cylinder with OR logic
06
6.
Control of a double-acting cylinder with AND logic
06
TOTAL
24
OBJECTIVES
Up on completion of the Lab the student shall be able to
1.0
2.0
3.0
Understand about the working of Pneumatic components.

1.1
Explain Pneumatics
1.2
Identify & List Symbols used in Pneumatic circuits.
1.3
Explain the phenomena of compressed air for transmitting power.
1.4
State Pascals law.
1.5
List all the pneumatic applications.
1.6
Define Pneumatic actuator.
1.7
Classify the actuators.
1.8
Explain Linear actuators and Rotary actuators.
1.9
Define valve.
1.10 List different types of valves.
1.11 Explain the function of a valve.
1.12 Identify the components of a valve.
1.13 Identify about ports and positions.
1.14 List the Applications of valves.
Understand about the working of Direct control of a Single-acting cylinder
2.1
Draw the circuit diagram for actuating a single-acting cylinder.
2.2
Select the suitable valve.eg:3/2 valve.
2.3
Connect 3/2 valve to the actuator.
2.4
Actuate the single-acting cylinder by operating 3/2 valve.
Understand about the working of Direct control of a Double-acting cylinder
3.1
Draw the circuit diagram for actuating a Double-acting cylinder.
3.2
3.3
3.4
Actuate the double-acting cylinder by operating 4/2 valve.
V-46
4.0
Understand about the working of Speed control of a Double-acting cylinder

4.1
Draw the pneumatic circuit for controlling the speed of double-acting
cylinder
4.2
Select 4/2 or 5/2 valve and a throttle valve.
4.3
Connect 4/2 valve and throttle valve as per the circuit.
4.4
Operate the 4/2 valve and adjust the throttle valve to control the speed of
double-acting cylinder
5.0
Understand about the working of Control of a Double-acting cylinder with

OR LOGIC
5.1
Draw the pneumatic circuit for controlling the speed of double- acting
cylinder using OR logic.
5.2
Select two 3/2 valves and a shuttle valve(OR Valve).
5.3
Connect 3/2 valves and OR valves to the double- acting cylinder as per
the circuit.
5.4
Operate either one of the 3/2 valves to control the speed of double-acting
cylinder.
6.0
Understand about the working of Control of a Double-acting cylinder with

AND LOGIC
6.1
Draw the pneumatic circuit for controlling the speed of double-acting
cylinder using AND logic.
6.2
Select two 3/2 valves and AND valve.
6.3
Connect 3/2 valves and AND valves to the double-acting cylinder as per
the circuit.
6.4
Operate two valves simultaneously to control the speed of double- acting
cylinder.
V-47
KEY competencies to be achieved by the student

S.No
Experiment Title
Key Competency
Identify the components of a pneumatic
circuits.
1.
Introduction to Pneumatics
2.
Direct control of a single-acting cylinder

3.
Direct control of a double-acting cylinder

Select two 3/2 valves and a shuttle

valve(OR Valve).
Connect 3/2 valves and OR valves to the
double- acting cylinder as per the circuit.
4.
Speed control of a double-acting cylinder
5.
Control of a double-acting cylinder with OR

logic
6.
Control of a double-acting cylinder with

AND logic
Select two 3/2 valves and a shuttle

valve(OR Valve).
Connect 3/2 valves and OR valves to the
double- acting cylinder as per the circuit.
Select two 3/2 valves and AND valve.
Connect 3/2 valves and AND valves to
the double- acting cylinder as per the
circuit.
COURSE CONTENT
1.0
2.0
3.0
4.0
5.0
6.0
Identify the Pneumatic components and its applications.

An experiment on Direct control of a single-acting cylinder and to know the
functioning of the equipment.
An experiment on Direct control of a double-acting cylinder and to know the
An experiment on Speed control of a double-acting cylinder and to know the
An experiment on controlling the speed of a double-acting cylinder with OR logic
and to know the functioning of the equipment.
An experiment Control speed of a double-acting cylinder with AND logic and to
know the functioning of the equipment.
REFERENCE BOOKS
1.
2.
Course Material on Basic Pneumatic Controls- ATI, Vidyanager, Hyderabad

Course Material on Applications of Pneumatics- TTTI, Extension centre,
Hyderabad(NITTTR-ECH)
V-48
FIELD PRACTICES
Subject Title
Subject Code
Periods Per Week
:
:
:
:
Field Practices
ME 510
06
90
TIME SCHEDULE
1. Production
Project
Measuring sizes with

a vernier caliper
Filing practice
Number of
Periods
Skill Exercise
Drilling practice
Measure the outside diameter, Inside diameter of

a bore
Measure the width of a tongue
Measure the length of a step
Measure the depth of a stepped bore
File the of Drill base of 151x101x6 on all sides
to remove material 1 mm
Drill through holes of 4X6 (@ 6,6) from all the
corners of the Drill base of 150x100x5
(Repeat the same procedure for Drill Guide)
04
04
04
The above practices can be exercised by considering similar components fulfilling the above
requirements
Gear hobbing
Manufacture of solid
shaft
Cutting splines on
the shaft
Cutting straight teeth

on the gear blank
Perform gear hobbing on a given MS job with OD

74, ID 17 and thickness 10mm, Take 1 module
as teeth thickness (or)
Performing spur gear cutting on a given MS job
with OD 74, ID 17 and thickness 10mm, Take
1 module
Turn and face the given cylindrical rod according
to the dimensions
Cut the key way on the above shaft for the flat key
Make the seat to mount the bearing on the above
shaft
to the dimensions
Index the job using dividing head
Cut the splines on the above shaft on milling
machine
Index the job using dividing head
Cut the teeth on the gear blank on milling machine
V-49
06
04
04
04
1. Production (contd,........
Project
Manufacturing
of
square
threaded
screw
Preparing template
for involute gear
tooth
Casting of
coupling
Number of
Periods
Skill Exercise
flange

to the dimensions
Cut the square threads on the rod for given pitch
using back gear of the lathe
Understand the law of gearing
Understand the properties and importance of
involute profile
Prepare the pattern
Prepare the mould and core for the flange
coupling
Drill the holes on the casted flange
Cut the key way in the hub of flange
04
04
04
2. Fabrication
Project
Fabrication
of
Almirahs and trunk
boxes
Critical cases
Number of
Periods
Skill Exercise
Measure the gauge of the sheet with gauge plate

Produce marking on sheet
Cut the sheet as per marking
Bend , weld the sheets
Apply primer and paint
List out the sequencing of job planning when you
have received a oversized component
04
04
Practically with the support of the process sheet proforma adopted.

Eg:1.Supporting of heavy weight job by using Jigs & Fixtures
2.If the dia.of the rod is more while testing on a UTM the suitable jaws will be replaced for
holding
3. Servicing
Project
Number of
Periods
Skill Exercise
Engines Eg:Differential,Gear box & M/c parts & its

components,etc
Repair
and
Refrigeration and Air conditioning test rigs
Maintenance of
Eg:Evacuating & charging of the Refrigerant,etc
Pumps Eg:Inlet & outlet valves,foot valve,gland of
a pump,etc.
The viist may arranged to the following:
Tyre servicing centers
Servicing and maintenance of Automobiles
Refrigeration system in dairies
Thermal power plants
Workshops (RTC)
V-50
04
04
04
4. Human Resource management

Project
Manpower
requirement
Number of
Periods
Skill Exercise
Planning and Assessing man power
Student will be guided to prepare the man power
requirement in the laboratories by assessing the
demand.
Eg:Boring of a component with an authorised process
sheet,etc
Skilled technician-1,Store keeper-1,Transport Asst.1,Helper-1
06
5. Inventory management
Project
Number of
Periods
Skill Exercise
Handle the Store House and its transactions

Select the Appropriate Storehouse Equipment
Use Appropriate methods to Preserve the Store
house material
Practice Replenishment of material
Practice Identification of store materials
Maintain
Appropriate
Records
in
Store
Material
08
requirement
Accounting
Use Material Budgeting Techniques
Use Techniques of Inventory control
Practice Purchasing and Disposal procedures
Use Quality control and Value Analysis
Practice Negotiation procedures
Use Transportation and Disposal procedures
Note: The student has to identify the material requirement in his field of working and should have
knowledge on purchasing, store maintenance and disposal of unserviceable & outdated
components & equipment.
6. Case studies
Project
Skill Exercise
Conduct
energy
Collect information about energy utilization in a
audit
for
local industry. Identify energy saving measures
workshop/Home/SSI
(to be) taken up in the industry
unit
Note: The viist may arranged to appropriate industry to collect the information
V-51
Number of
Periods
04
6. Safety
Project
Mock drill
Number of
Periods
Skill Exercise
Rescue the persons from crash

Rescue the persons from Fire accident
Eg:Fire Accident
Knowledge & practice on fire extinguishers
Using of sand buckets
Informing to the fire fighting agency.
Practice the First aid procedures
First Aid
Eg:Hitting of a shaper ram
Cleaning the injured area with spirit
Applying betadin over injury
Temporary bandage over the injury
Moving person to nearest hospital
Artificial Respiration incase of electrical shock,etc
SKILLS
Up on completion of the skill session the student shall be able to
1.0
Measure the outside and inside diameters of a bore

Check the condition of the caliper
Confirm the looseness of the locking screw
Clean every part of the caliper with rags
Close the jaws, and examine the opening through light
Check whether the zero points coincide
Measure Outside diameter:
Open out the movable jaw slightly more than the measurable size
Place the jaws at right angles to the axis of the work piece
Close the jaw over the work piece such that the nib of the jaws just slip
from the point of contact
Lock the nib and record the reading
Measure Inside diameter:
Open out the ribs of the vernier caliper slightly less than the measurable
size.
Place the nibs inside the bore surface such that the nibs are parallel to
the axis of the work piece and centre of the bore
Open out the nibs so as to make contact on the bore surfaces, and swing
the nibs to measure the maximum value of the bore size
Lock the nib and record the reading
V-52
06
04
2.0
File the of Drill base of 151x101x6 on all sides to remove material 0.5
mm
Wear the apron
Check the raw material (Drill base) size as per the work sheet
(151x101x6)
Select the suitable height of the vice
Clamp the work piece centrally across the base firmly in position
File surfaces flat and parallel to an accuracy of 0.05 mm
File angle to 900 to a try-square accuracy
Check for flatness and squareness using tri-square
Measure the specifications of job is to be 150x100x5
3.0
Drill through holes of 4X6 (@ 6,6) from all the corners of the Drill
base of 150x100x5
Wear the apron
Follow safety and procedural precautions
Check the Drill base for its size
Mark and locate the centres for the holes to be drilled
Mount the job in a machine vice, using parallels and clamp it securely
Set the work table in such a manner that the drill can be fixed and
removed without disturbing the vice or table
Fix a centre drill on the chuck in a drilling machine spindle and align with
the centre mark on the job
Spot the hole location with the centre drill
Remove the centre drill and fix the required drill of 6 without disturbing
the vice or table
Perform an operation of drilling a hole of a diameter of 6 up to a depth
of 1mm for first go
Operate a coolant pump
Drill through hole as per requirement
4.0
Perform gear hobbing on a given MS job with OD-74, ID-17 and

Thickness 10mm, Take 1 module as teeth thickness
Wear the apron
Check the raw material specifications OD-74, ID-17 and thickness
10mm size as per the work sheet
Fix the job on appropriate mandrel using watchers and ensure that the
one side of mandrel to be fitted in the cullet of the Miller and another side
should be tightened using nut
Fix the 1 module cutter(Gear hobber) specified as 00.81 M200 LA , 00 571
800 PA
Set the index table to suit the cutter specifications
Set the feed as 0.15 mm / rev as per the Gear train chart
Set the speed as 624 m/min for the material MS EN8 as per the speed
chart
Switch on the machine to perform the operation i.e Gear hobbing
Ensure that the operation is completed in 08 min
Take care of safety and procedural precautions
Remove the chips from the job
V-53
Clean the machine

Remove the job with mandrel from machine cullet
5. Understand the Material Requirement plan (Note: The faculty in charge needs to
plan appropriate situation to accomplish the given exercises)
Handle the Store House and its transactions
1. Draw a typical layout of storeroom considering
a) Optimum utilization of space
b) Easier accessibility to all materials
c) Maximum security of all materials
d) Minimization of spoilage and damage
2. Select appropriate Store depot based on their function and utility
a) For minimum possible stocks of spares, Equipments, Tools
b) If regular supplies are received, Un-necessary hold- ups
and delays in work are avoided
CSD Central Store Depot
BSD Branch Store Depot
TSD Tool Store Depot
Select the Appropriate Storehouse Equipment
1. Identify storeroom equipment for a given materials
2. Group the articles according to their nature of storage
3. Arrange appropriate racks to store various materials like Bar,
Tubes, Angles, Plate, Sheet, Tyre and Drum
4. Use Various measuring equipment to receive the different types of
material
5. Which type of material handling equipment do you select, If you are
given the following materials
a) Bricks
b) Reels of wire
c) Drums
d) Bales of paper
6. Which type of material handling equipment do you select to lift the
machines of 2 to 6 tonnes up to the height of 40 feet
Use Appropriate methods to Preserve the Store house material

1. Preserve the following material according to the manufacturing criteria,
degree of temperature and duration
1. Metals
2. Timber
3. Textiles
4. Rubber goods
5. Chemicals
6. Leather goods
2. Maintain Replenishment of stock by fixing
a) Maximum level
b) Minimum level
c) Order level
d) Danger level
V-54
Practice Replenishment of material

Represent graphically the Working stock and Safety stock in
Replenishment of material
Practice Identification of stores

1. Classify and Use Identification system for a given Raw material,
Consumables, Machines and Equipment, Inflammable stores, Chemicals,
Furniture, General stores, Scrap materials, Packaging materials, Fuel stock
Maintain Appropriate Documents in Store Accounting

1. Prepare the Documents for recording of Receipt of material
a) Material Receipt book
b) Material Receipt Note
c) Daily Receipt Voucher
d) Damage/Shortage/Excess Report
e) Package slip
f) Bin Card
g) Stock Ledger
h) Stock Identification Card
2. Prepare the Documents for recording of Inspection of material
a) Purchase order
b) Daily Receipt Voucher
c) Inspection Note
d) Rejection Note
e) Bin Card
f) Stock Ledger
g) Stock Identification Card
3. Prepare the Documents for recording of Issue of material
a)
Material Requisition Slip
b)
Bin Card
c)
Gate pass
d)
Stock Ledger
e)
Stores Advice Note
4. Prepare the Documents for recording of Verification of Stores
a)
Stock- Taking Sheet
b)
Stock Valuation Sheet
c)
Bin Card
d)
Material Transfer Note
e)
Material Return Note
f)
Stock Ledger
5. Prepare the Documents for recording of Material Control
a)
Stock Day sheet
b)
Stock Ledger Card
c)
Kardex Card
Use Material Budgeting Techniques
1. Practice the Estimation of Consumption and Purchase of
materials of a given Organization
V-55
2. Use the Techniques for Drawing up a Material Budget of a given

Organization.
Use Tools and Techniques of Inventory control
1. Practicing of Estimation of Consumption and Purchase of
materials of a given Organization
2. Use the Techniques for Drawing up a Material Budget of a given
Use Tools and Techniques of Inventory control
1. Practice the Estimation of Inventory carrying cost, Stock-out Cost and
Control levels of a given Organization.
2. Use the Tools and Techniques of Inventory control
3. Prepare the Stock Control Card
Practice Purchasing and Disposal procedures

1. Practicing the purchasing principles of six Rs.
a) Right Quality
b) Right Quantity
c) Right Time
d) Right Price
e) Right place, and
f) Right Source
2. Use the Various Order Quantities in purchasing and Disposal
3. Practicing the use of purchasing systems considering legal aspects of
purchasing
4. Practicing the use of the following documents in purchase procedure
a) Purchase Requisition
b) Purchase Enquiry
c) Suppliers Quotation
d) Comparative statement
e) Purchase Order
Bill / Invoice
Use Quality control and Value Analysis

1. Practicing the use of the following Methods of describing quality of the product
a) Samples
b) Brand name
c) Specifications
d) Grades
2. Use the Five stages of Quality control for an effective accomplishment
of Onerous task
3. Practicing the use of Techniques of Value Analysis in reducing the
product cost
a) EKCHANGE, and
b) MISS
V-56
Practice Negotiation procedures

1. Practice the Phases of Negotiation
[ Note: Arrange a practicing session between two parties ]
Use Transportation and Disposal procedures

1. Practicing the following tasks to be carried out for effective transportation of
goods of an enterprise
Estimation of
a) Cost of transportation
b) Commodity value
c) Size of Shipment
d) Distance control
e) Type of Transport
f) Speed
2. Practicing the appropriate Disposal procedures
a) Surplus Items
b) Obsolete Items
c) Scrap Items
V-57

VI Semester/(THIRD YEAR)
Subject
Code
Instruction
period / week
Name of the Subject
Total
Period
/ year
Duration
(hours)
Sessional
Marks
End
Exam
Marks
Theory
Practical/
Tutorial
Total
Marks
60
100
75
100
60
100
45
100
75
100
60
100
60
100
45
100
45
100
105
100
25
17
630
THEORY:
Entrepreneurship and
Project Management
Refrigeration & Air
ME-602
Conditioning
Energy Sources &
ME-603 Power Plant
Engineering
ME-604 CAM
Measurement &
ME-605
Control Systems
Automobile
ME-606
Engineering
PRACTICAL:
ME-601
ME-607
ME-608
ME-609
ME-610
CAM Lab
T.E and R & AC Lab
Practice
Manufacturing
&Servicing and
Maintenance Lab
Practice
Project work
TOTAL
VI-1
1000
ENTREPRENEURSHIP AND PROJECT MANAGEMENT

Subject Title
Subject Code
Periods/Week
S. No.
1.
2.
3.
.4
:
:
:
:
Major Topics
Entrepreneurship and Project Management

M601
04
60
TIME SCHEDULE
Periods
Role
of
Entrepreneur
and
Entrepreneurial Development
Marketing ,Sales & Feasibility study
Industrial legislation & safety
Introduction to ISO 9000 & T.Q.M.
Total
Weightage
Of
Marks
Short
Answer
Questions
Essay
Type
Questions
12
26
02
02
12
18
18
60
26
29
29
110
02
03
03
10
02
02
02
08
OBJECTIVES
1.0
Understand the role of entrepreneur in economic development and in

improving the quality of life.
1.1
Explain the concepts of Entrepreneurship.
1.2
Define the word entrepreneur.
1.3
Explain the role of Entrepreneurship.
1.4
List the qualities of an entrepreneur.
1.5
Explain the requirements of an entrepreneur.
1.6
Outline the expectations of Entrepreneurship.
1.7
Explain the role of entrepreneurs in promoting Small Scale Industries.
1.8
Explain the details of self-employment schemes.
1.9
Explain the method of product selection.
1.10 Explain the method of site selection.
1.11 Outline the method of plant layout.
1.12 State the needs for a planned and co-ordinated effort.
1.13 State the importance of follow up.
1.14 Describe the small business scheme.
1.15 List the financial assistance programmes.
1.16 List the organisations that help an entrepreneur.
2.0
Understand marketing, sales and feasibility study.

2.1
Explain marketing functions.
2.2
Explain Sales function.
2.3
List out market conditions
2.4
Differentiate Sellers and Buyers market.
2.5
Differentiate monopoly, oligarchy, and perfect competition.
2.6
Explain the conduct of demand surveys
2.7
Explain the conduct of a market survey
2.8
Differentiate product and production analysis.
2.9
List the input materials, i.e. Bill of materials
VI-2
2.10
2.11
2.12
2.13
2.14
2.15
Define the main policy requirements

Explain the selection of site
Evaluate Economic and Technical factors
Prepare feasibility study
List different products currently in demand with market or industry
Explain Role of advertising, media of advertising and selection of media
3.0
Comprehend the provisions of industrial legislation in India. & Safety

procedures
3.1
Describe employer and employee relations.
3.2
Describe the mechanics of Trade Unions.
3.3
Describe mechanics of settlement of in outs.
3.4
Explain the significance of collective bargain.
3.5
List Welfare activities.
3.6
List subsidy schemes.
3.7
Explain the total welfare concept.
3.8
List the rights and responsibilities of employees and employers.
3.9
List the salient features of Indian Factories Act.
3.10 List the salient features of Minimum Wages Act.
3.11 List the salient features of Industrial Disputes Act.
3.12 List the salient features of Workmens Compensation Act
3.13 List the salient features of E. S .I. Act.
3.14 List the salient features of consumer protection rights Act
3.15 Explain the importance of safety at Work place.
3.16 Explain the significance and mechanics of safety education.
3.17 Explain hazard and accident
3.18 List different hazards in the Industry
3.19 Explain the causes of accidents
3.20 Explain the direct and indirect cost of accidents.
3.21 List types of fire extinguishers
3.22 Describe the method of artificial Respiration.
3.23 List provisions of Indian Electricity Rules laid in the electricity
act1923.
4.0
Understand ISO 9000 & TQM.

4.1
Explain the concept of quality.
4.2
List the quality systems and elements of quality systems.
4.3
State the principles of quality Assurance.
4.4
State the Indian Standards on quality systems.
4.5
List the evolution of ISO standards.
4.6
Explain ISO standards and ISO 9000 series of quality systems.
4.7
State the constituents of ISO 9000 series of standards for quality
systems.
4.8
State the outstanding features and drawbacks of ISO 9000 series of
standards.
4.9
List the beneficiaries of ISO 9000.
4.10 Explain 5-S principles and ZERO DEFECT.
VI-3
COURSE CONTENT
1. Role of Entrepreneur & Entrepreneurial Development.
Materials in industry, inventory control model, ABC Analysis, Safety stock, reorder, level, Economic ordering quantity, Cost Elements of Cost, Contribution,
Break even analysis, Stores layout, stores equipment, Stores records,
purchasing procedures, purchase records, Bin card, Cardex, Material handling,
Manual lifting, Hoist, Cranes, conveyors, trucks, fork trucks.
2. Marketing, Sales & Feasibility Study
Sellers and Buyers markets, Marketing, Sales, Market conditions, monopoly,
oligarchy, perfect competition, Budgets, Pricing Policies. Market Survey, Product
and production Analysis, Materials input, Manpower, Location, Economic and
Technical Evaluation, preparation of Feasibility study reports, - different products
Mechanical, Electrical, Electronics, consumer items, Consumer desires etc.
3. Industrial Legislation and safety
Employer Employee relations, Trade, Union Settlement of disputes, collective
bargaining, Welfare activities, subsidies, Total Welfare concept, rights and
responsibilities and Employers and employees. Salient features of (i) Indian
Factories Act, (ii) Minimum Wages Act, (iii) Industrial Disputes Act, (iv)
Workmens compensation Act, (v) E.S.I Act. (Vi) Consumer protection act
Important of Safety at work places, Safety Education, Hazards, causes of
accidents, Cost of accidents, Fire Extinguishers, Artificial respiration, Indian
Electricity rules.
4. Introduction to ISO 9000 and TQM
Concept of quality discussed by B. Crosby W. Edward, Deming, Joseph M.
Juran, Kooru Ishikawa, Genichi Taguchi, Shigco Shingo.Quality systems
Definitions of the terms used in quality systems like, quality policy, quality
management, quality systems, quality control and quality assurance
Elements quality systems : Management responsibility, Quality system, contract
review, design control, document control, purchasing, purchaser supplied
product, product identification and traceability, process control, Inspection and
testing. Principles of quality assurance Definition of quality assurance.
Indian standards on quality systems Main features of IS 13999 : 1990, IS
14000 : 1990, IS 14004 : 1990, IS 14001: 1990, IS 14002 : 1990, IS 14003:
1990. The necessity of International standards Evolution of ISO. 5-S principles
importance meaning approach benefits
Various standards under ISO Outstanding features of ISO 9000 series of
standards ISO 9000 Phenomenon ISO 9000 series of quality systems
Constituents of ISO 9000 series of standards for quality systems.
Drawbacks of ISO 9000 series of standards, list the beneficiaries of ISO 9000
REFERENCE BOOKS
1.
Industrial Engineering and Management
-by O.P Khanna
2.
Production Management- by Buffa.
3.
Engineering Economics and Management Science - by Banga & Sharma.
4.
S.S.I Hand Book by S.B.P. Publishers.
5.
Personnel Management by Flippo.
6.
Entrepreneurship by NITTT&R, Chennai.
7.
Industrial safety management- by Deshmukh (MGH Publishers)
VI-4
REFRIGERATION AND AIR CONDITIONING

Subject Title
Subject Code
Periods/Week
Sl.
No.
1.
2.
3.
4.
5.
6.
:
:
:
:
Refrigeration & Air conditioning

M-602
05
75
TIME SCHEDULE
No. of
Periods
Fundamentals of Refrigeration &
10
Air Refrigeration
Vapour compression & Vapour
18
absorption Refrigeration Systems
Refrigerants,
Refrigeration
16
equipment & Applications
Fundamentals of A/c & A/c
08
Equipment
Psychrometry, Cooling & Heating
14
loads
Applications of A/c, Servicing and
09
maintenance of Refrigeration and
A/c equipment
Total
75
Major Topics
Weightage
Short
Essay
13
01
01
26
02
02
26
02
02
13
01
01
19
03
01
13
01
01
110
10
08
OBJECTIVES
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
2.0
2.1
2.2
2.3
2.4
Understand the various methods of Refrigeration.

Define refrigeration.
Explain the history of refrigeration.
Explain different methods of refrigeration such as ice, dry, ice, steam jet water
refrigeration, liquid nitrogen refrigeration.
Express unit of refrigeration in Terms of ton of refrigeration.
Define coefficient of Performance.
Evaluate power required per ton of refrigeration.
Explain the principle of open air refrigeration.
Analyse Carnot refrigeration Cycle.
Analyse Bell-Coleman air-cycle.
Calculate COP in above cases.
Explain principle of closed air Refrigeration.
Distinguish between open air system with closed air system.
Understand Vapour Compression, and Vapour absorption
Refrigeration Systems.
Explain the importance of vapour compression system.
Explain vapour compression refrigeration with the help of T-S and P-H diagrams.
Distinguish between wet and dry compression.
Explain the effects of under cooling and super heating and effect of pressure
changes on COP.
VI-5
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
2.14
2.15
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
3.10
3.11
3.12
3.12
3.13
3.14
State the use of flash chamber and accumulator.

Calculate COP of plant working on vapour compression system.
Explain principle of simple vapour absorption systems.
List refrigerant Absorber pairs in the above system.
State the desirable properties of refrigerants absorbers.
Describe the working principle of vapour absorption refrigeration
system with the help of a legible sketch.
Calculate COP of the ideal vapour absorption system.
Differentiate two fluid system and three fluid absorption system.
Explain working of solar powered refrigeration system with the help of a
legible sketch.
Explain the working of Electrolux refrigeration with the help of a legible
sketch.
Explain the working of Lithium Bromide absorption refrigeration system with the
help of a legible sketch.
Understand the Refrigerants, Refrigeration Equipment and applications of
Refrigeration
Distinguish between primary and secondary refrigerants.
State the requirements of Refrigerants.
List the properties of refrigerants.
List the commonly used refrigerants.
Explain different types of compressors such as reciprocating and rotary
State the function of condenser and classify the condensers
Explain different types of condensers such as shell & tube, shell and
coil, fin and tube, flooded tube type with the help of a legible
sketch..
State the function of evaporator and classify the evaporators
Explain various types of evaporators such as shell & tube, shell and
coil, fin and tube, flooded tube type with the help of a legible
sketch.
Explain the functions of various types of expansion devices such as
capillary tube, thermostatic expansion valves and solenoid valves with the help of
a legible sketch.
Explain the refill type and throw away type dryers.
Explain the working of domestic refrigerator with the help of a legible
sketch.
Explain the working of ice Plant with the help of a legible sketch.
Explain the working of water cooler with the help of a legible
sketch.
Explain the working of cold storage with the help of a legible
sketch.
Explain the production of dry ice with the help of a legible sketch.
3.15
.
4.0 Understand fundamentals of Air conditioning and Air conditioning
equipment
4.1
Define air conditioning
4.2
List modern applications of A/c.
4.3
Explain Air conditioning as applied to human comfort.
4.4
Explain the functions of fans, ducts, filters (wet, dry, electric & viscous
types) C.F dust collector with the help of a legible sketches.
VI-6
4.5
4.6
Explain the use of heating and cooling coils.

Explain the air distribution system.
5.0
5.1
Understand Psychrometry, Cooling and Heating loads.

Define the terms humidity, Relative humidity, dew point, DBT & WBT, Absolute
humidity, humidity ratio.
Explain the features of psychrometric chart.
Plot psychometric processes on the above chart.
Explain the psychrometric patterns for heating and cooling processes.
Define Fundamentals of Heat transfer Conduction, convection and Radiation.
Compute cooling load components involved in cooling load.
Compute heating load components involved in heating load.
(Problems on load calculations are Omitted )
5.2
5.3
5.4
5.5
5.6
5.7
6.0
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
Appreciate the applications of A/C.

Explain the working of air coolers.
Explain the working of window air conditioner.
Explain the working of cooling tower installations.
Explain the working of A/c systems viz., centralised and unitary systems.
Explain the working of summer/winter/year round air conditioners.
Explain the symptoms of gas shortage.
Explain the methods of leakage detection.
List the causes of common Breakdown.
List the remedial measures for breakdown.
COURSE CONTENT
REFRIGERATION
1.0
Fundamentals of Refrigeration and Air Refrigeration

Introduction Definition and meaning of refrigeration, methods of refrigeration
unit of refrigeration COP.
Thermodynamic analysis of Refrigeration cycles, Carnot refrigeration cycle Air
refrigeration cycle (Bell Coloman) open air and closed air systems of
refrigeration.
2.0
Vapour Compression and absorption Refrigeration Systems.

Principle & analysis of vapour compression refrigeration system with the help of
T-S & P-H diagrams wet, dry and superheated compression Refrigerating
effect Effect of pressure changes on C.O.P., effect of sub cooling of
condense on COP and capacity effect of super heating of vapour before
compression flash chamber and accumulator.
Principle of vapour absorption refrigeration, C.O.P of vapour absorption system Refrigerants and absorbents their properties two fluid & three fluid systems
solar powered refrigeration system - Electrolux refrigeration comparison of
vapour absorption and vapour compression systems.
3.0
Refrigerants, Refrigeration Equipment and applications

Primary and secondary refrigerants with examples requirements of a refrigerant
properties of refrigerants Commonly used refrigerants
VI-7
Compressors types of compressors.Condensers types of condensers.

Evaporators types of evaporators.Expansion devices types of expansion
devices Refill type and throw away type driers.
Domestic refrigerator ice plant, Water cooler cold storage production of dry
ice.
AIR CONDITIONING
4.0
Fundamentals of A/c and A/c equipment

Comfort air conditioning: Human comfort effective temperature Factors
governing effective temperature conditions that effect body heat comfort chart.
A/C Cycle equipment such as fans, supply ducts, outlets, return outlets and
ducts, filters & dust collectors heating/cooling coil-Air distribution.
5.0
Psychrometry, Cooling and Heating

Psychrometry Psychrometric terms Psychrometric chart Solving problems
with psychrometric chart Practical applications of psychrometric terms
Psychrometric processes.
Psychrometric patterns for heating & cooling
processes.
Conduction, convection and Radiation definitions - Heating and cooling load .
6.0
Applications of A/C, Servicing and maintenance of Refrigeration and A/c

equipment
Applications of A/C: Air coolers window air conditioner (split & package type )
cooling towers A/C systems: summer/winter/year round A/C, central A/C
system unitary system.
Food preservation freeze drying.
Servicing & Maintenance of Refrigeration and A/c Equipment trouble shooting.
REFERENCE BOOKS
1.
2.
3.
4.
5.
6.
7.
Refrigeration and Air Conditioning by Domakundavar

Refrigeration and Air Conditioning by Arora (MGH Publishers)
Basic Refrigeration and Air conditioning - by P N Ananthanarayana
(MGH Publishers)
Refrigeration and Air Conditioning by Sarao & Gabi
Refrigeration and Air Conditioning by Dosatt
Refrigeration and Air Conditioning by Stoecker
Trouble shooting of Refrigeration & -by Ananthanarayana
Air conditioning
VI-8
ENERGY SOURCES AND POWER PLANT ENGINEERING

Subject Title
Subject Code
Periods/Week
Periods/Semester
:
:
:
Energy Sources and Power Plant

Engineering
M-603
04
60
TIME SCHEDULE
S. No.
Major Topics
No. of
Periods
Weightage
of Marks
Introduction of
Renewal
Sources of Energy
Solar and Wind Energy
Fuel
Cells
and
MHD
Generator
Bio and Tidal Energy
Thermal and Nuclear Power
Plants
04
Environmental Pollution
Total
2
3
4
5
Essay Type
Questions
03
Short
Answer
Questions
01
12
10
26
13
02
01
02
01
12
16
26
29
02
03
02
02
06
60
13
110
01
10
01
08
OBJECTIVES
1.0
2.0
Understand the need of Energy Sources

1.1 State various energy sources, give examples
1.2 Classify energy sources as renewable and non renewable energy
1.3 State Advantages and disadvantages of renewable and non renewable
energy sources
1.4 Appreciate the need of renewable energy sources
1.5 State the different types of renewable energy sources
Understand the concept of Solar and Wind Energy
2.1 State the amount of solar radiation reaching the earths surface
2.2 Determine the solar constant
2.3 State the principle of measuring solar radiation by pyranometer and
pryheliometer
2.4 State the principle of conversion of solar radiation into heat.
2.5 Explain the function of liquid flat collector
2.6 Explain the working principle of solar air heater with a legible sketch
2.7 State the applications of solar air heater
2.8 Identify different types of concentrating collectors
2.9 Explain the working principle of concentrating collector (focusing type,
parabolic trough collector and flat plate collectors with plain reflectors).
VI-9
2.10
2.11
2.12
2.13
2.14
2.15
2.16
2.17
2.18
2.19
2.20
2.21
2.22
2.23
2.24
2.25
2.26
2.27
2.28
2.29
2.30
2.31
2.32
2.33
2.34
2.35
State the different methods of storing solar energy

Explain the methods of sensible heat, latent heat and thermo chemical
storage.
Explain the working principle of solar pond with a sketch
State the applications of solar pond
Explain with the help of sketch the construction details and working
principle of different types of solar water heater
principle of solar space heater
principle of absorption refrigerator type solar space cooler
principle of solar still
principle of cabinet and connective type of solar drier
principle of Box type solar cooker
State the principle of photo voltaic conversion.
State the working principle of solar cell
Explain the conversion energy and current voltage characteristics of solar
cell.
State the use of photo voltaic cell for power generation
Explain the solar photovoltaic arrays
Explain the solar water pumping system with a sketch
State the advantages and limitations of solar energy conversion.
Explain the power available in the wind and force caused by it on the
blades.
State the collection of wind data and estimate the energy
State the different considerations for sight selection for installing wind mill.
Identify the basic components of a wind mill
Explain the construction details on the working principle of the wind mill
State the differences between horizontal axis and vertical axis type wind
mills
Define the terms co-efficient of performance and tip speed ratio
Plot curves to indicate the variation of co - efficient of performance with tip
speed ratio.
Explain the method of generation of electricity by wind mill
3.0
Comprehend Fuel Cells and MHD Generator

3.1
State the working principle of fuel cell
3.2
Explain the construction details and working principle of Bacans High
pressure fuel cell with a legible sketch
3.3
State the different types of fuels used in fuel cells
3.4
Explain the working principle of aluminium air fuel cell with a legible sketch
3.5
Explain the working principle of MHD Generator a legible sketch
4.0
Understand Bio and Tidal Energy

4.1
Define the meaning of bio-mass and bio-gas
4.2
State the principle of bio-gas generation
4.3
State the chemical composition and properties of bio-gas
4.4
List the applications of bio-gas
VI-10
4.5
4.6
4.7
4.8
4.9
4.10
4.11
4.12
4.13
4.14
4.15
List the different types of bio-gas plants

Explain the construction details and working principle of fixed dome type
and floating dome type bio-gas plants with sketches
State the different materials used for bio-gas generation
Express bio-gas plant capacity
State the methods of generator control and load control
Identify the energy available in tides and its usefulness in conversion
State the working principle of tidal power plant
State the different operation methods of utilisation of tidal energy
Explain single basin and double basin arrangements
State the site requirements for installation of tidal power plant
State the advantages and limitations of tidal power generation
5.0
Analyse the elements of Thermal and Nuclear Power Plants.

5.1
Draw the layout of a thermal power plant.
5.2
Explain the layout of thermal power plant
5.3
Locate the Boiler, superheater, turbine , Electric Generator, Condenser
and hot well pump in the layout.
5.4
Explain function of circulating water pump, Economiser, Air pre heater,
Soot Blower.
5.5
Explain the dust extraction in Electrostatic precipitator.
5.6
Explain about the ash removal, water cooling.
5.7
Explain about the feed water treatment.
5.8
Explain about the coal handling
5.9
Explain about the coal storage.
5.10 Identify the fuel handling equipment.
5.11 Trace the ash disposal system.
5.12 State the necessity of condensing the steam
5.13 State the principle of condensation in condenser
5.14 List different types of condensers
5.15 Explain the chain reaction
5.16 Explain the process of nuclear fission and nuclear fusion.
5.17 List nuclear fuels
5.18 State the characteristics of atomic power plants
5.19 Explain the principle of working of a nuclear reactor
5.20 Classify the nuclear reactors
5.21 Explain with the help of legible sketch the constructional details and the
working principle of : (i) PWR (ii) BWR power plant.
5.22 Explain with the help of legible sketch the constructional details and the
working principle of: (i) GCR (ii) Liquid metal - C.R.
Power plant.
5.23 Explain about the nuclear power in India.
6.0
Understand the concept of environmental pollution

6.1
Explain the various pollutants and their effect on the environment viz.,
i) Particulate pollutants.
ii) Solid waste pollutants.
iii) Gaseous pollutants.
6.2
Explain the effect of thermal pollution
6.3
Explain green house gases and green house effect
6.4
Explain the phenomena of global warming
VI-11
6.5
6.6
Explain the effects of nuclear radiation

Explain the disposal of nuclear waste
(i) Ground (ii) Air (iii) Ocean
COURSE CONTENT
1.0
Introduction: Various energy sources, Examples for energy sources, advantages

and disadvantages, Need for alternate sources of energy types of non
conventional (renewable) energy sources solar energy, wind energy, energy
from bio- mass and bio-gas, tidal and wave energy, hydrogen energy, fuel cells
2.0
Solar and Wind Energy

Solar Radiation: Solar constant solar radiation at earths surface instruments
for measuring solar radiation pyranometer, pryheliometer.
Solar Energy Collection
Principle of conversion of solar radiation into heat
liquid flat collectors - solar air heater Application of solar air heater
concentrating collectors (focusing type) parabolic collector plate collectors with
plane reflectors.
Solar Energy Storage
Methods of storing solar energy sensible heat storage , latent heat storage and
thermo chemical storage solar pond working principle and description of solar
pond with a schematic diagram applications of solar pond.
Solar Energy Applications
i) Solar water heater natural circulation type and forced circulation type.
ii) Solar space heater passive type and active type
iii) Solar space cooling absorptive refrigeration system
iv) Solar still, Solar drier cabinet type and convective type and Solar cooker
Photo voltaic conversion
solar cell working principle conversion efficiency and current
voltagecharacteristics of a solar cell photo voltaic cell for power generation solar
photo voltaic arrays solar water pumping system Advantages and
disadvantages of solar energy.
Wind Energy
Introduction power in the wind forces on the blades wind data energy
estimation site selection considerations basic components of a wind mill
construction details and working principles types of wind mill horizontal axis
type and vertical axis type variation of co efficient of performance with tip speed
ratio electric generation by wind mill generator control load control.
3.0
Fuel Cells and MHD Generator

working principle Bacans High pressure fuel cell construction details and
working principle types of fuels used Aluminium air fuel cell working principle.
working principle of MHD Generator
VI-12
4.0
Bio and Tidal Energy

Bio Energy Introduction to bio mass bio-mass conversion into energy bio-gas
generation composition and properties of bio-gas applications of bio-gas.
Classification of bio-gas plants continuous and batch type, the dome and drum
type, floating gas holder and fixed dome type construction details and working
principle of fixed dome type and floating gas holder type bio gas plants
materials used for bio-gas generation capacity of bio-gas plant starting of biogas plant.
Tidal Energy : Introduction to tidal power components of tidal power
plants operation methods and utilisation of tidal energy single basin and
double basin arrangements- site requirements advantages and limitations of
tidal power generation.
5.0
Steam and Nuclear Power Plant

Steam Power Plant
Layout of a Thermal Power Plant, Choice of site, explanation of important
elements in layouts:- Such as Boiler, Condenser , Feed water system,
Circulating water pumps ,Economiser, Air heater, SootBlower , Forced draught
Fan, Dust collectors, Electro static precipitator
Supporting activities:- Such as Water cooling, Feed water treatment, Coal
handling, Coal storage , Chimney.
Description of fuel handling equipment, unloading equipment, preparing
equipment, modern ash handling equipment, dust collection and disposal , roots
blower, condensers, principles classification comparison condensers and
vacuum efficiencies and simple problems.
Nuclear Power Plants
Nuclear energy chain reaction , nuclear materials, reactor, nuclear fission ,
nuclear fusion, characteristics of automatic power plants, nuclear fuels , working
principle of nuclear reactor, classification of reactors, working principle of PWR
and BWR , Gas Cooled reactor, liquid metal cooled reactor, nuclear power in
India
6.0
Environment Pollution.
Introduction - Pollutants particulate/solid/gaseous - Thermal pollution
Collection, green house gases, green house effect, global warming. Nuclear
waste disposal.
REFERENCE BOOKS
1. Non conventional Energy source by G.D Rai.
2. Energy Technology
by S. Rao & Dr. D.B. Palekr
(Non conventional , Renewable and conventional)
3. Solar energy utilisation by G.D.Rai
4. Introduction to alternate sources of energy
by TTTI, Madras
5. Solar energy by S.P. Sukhatme
6. Advances in bio-gas technology by
O.P.Chawla.
8. Thermal Engineering by Arora & S. Domkundwar
VI-13
CAM
Subject Title
Subject Code
Periods per week
Period per semester
:
:
:
:
Computer Aided Manufacturing

M 604
03
45
TIME SCHEDULE
Sl
No.
Major Topics
No. of
periods
Weightage
Short
Essay
1.
Introduction to CAM
07
26
02
02
2.
CNC Machines and their

components
10
29
03
02
3.
CNC Part Programming
12
26
02
02
4.
CIMS & Flexible

Manufacturing Systems
10
16
02
01
5.
Robotics
06
13
01
01
45
110
10
08
TOTAL
OBJECTIVES
1. Understand Computer Aided Manufacturing
1.1. Define CAM
1.2. List the functions of CAM
1.3. Appreciate the advantages of CAM
1.4. Explain the computer integrated production system
1.5. Explain the terms related to material requirement planning (MRP I) and
Manufacturing resources planning (MRP II)
2. Understand CNC Machines and their Components
2.1. Define numerical control
2.2. Identify the components of NC & CNC systems
2.3. Differentiate between NC, CNC & DNC systems
2.4. Explain Manufacturing Methodology on NC system
2.5. Illustrate the working principle of CNC system
2.6. Define Machining Centre
2.7. Identify the maintenance aspects of CNC machines
2.8. Appreciate the role of CNC in computer integrated manufacturing
environment
2.9. Identify the various spindle drives
2.10 Illustrate slide ways
2.11 Explain the linear motion bearings, recirculatory ball screws
2.12 Appreciate the importance of automatic tool change
VI-14
2.13 Illustrate tool magazine

2.14 Identify the various feed back devices
3. Understand the CNC Part Programming
3.1. Explain the structure of NC part program
3.2. Differentiate between manual and computer aided programming methods
3.3. Explain G & M codes
3.4. Explain the method of programming tool information, feed, speed data
3.5. Identify the various programming cycles like thread cutting cycle etc.
3.6. Write a part program in G & M codes for a simple turning job
3.7. Appreciate the importance of macros, sub routines, canned cycles, mirror image
3.8. Appreciate the necessity of tool nose radius compensation in programming
3.9. Explain APT programming
4. Understand the concept of CIMS & FMS
4.1. Define CIMS
4.2. Appreciate the necessity of CIMS
4.3. Appreciate the advantages of CIMS
4.4. Identify FMS as a sub set of CIMS
4.5. Identify the components of FMS
4.6. Illustrate the working of FMS
4.7. Identify the benefits of FMS
4.8. Appreciate the importance of coordinate measuring machine.
4.9. Illustrate the main features of CNC, CMM
4.10.List the Advantages of CNC, CMM
5. Understand Robotics
5.1. Define a robot
5.2. Classify robots
5.3. Identify the various elements of a robot
5.4. Illustrate the working of a manipulator
5.5. Illustrate the types of end effectors
5.6. Identify the applications of robots
5.7. Appreciate the role of robots in CIMS
COURSE CONTENT
1.
Computer Aided Design and Manufacturing

1.1. CAM definition
1.2. Functions of CAM
1.3. Benefits of CAM
1.4. Integrated CAD / CAM Organization - concept
1.5. Computer integrated production system features and advantages
1.6. Introductory treatment to MRP I & II
2. CNC Machines and their components

2.1. Introduction to numerical control
2.2. Features of NC system advantages and limitations in comparison to
conventional systems
2.3. Components of NC system layout showing control unit, data input, feed back
devices and machining unit
VI-15
2.4. Manufacturing methodology on NC system preparation of manuscript

programming input to control unit manufacturing
2.5. Development of CNC and DNC systems comparative treatment of features for
NC, CNC, DNC
2.6. Block diagram of CNC system and functions of each component
2.7. Working principle of CNC system advantages over NC system
2.8. Types of turning centers machining centers horizontal, vertical
2.9. Specifications of CNC machines.
2.10. Care and maintenance of CNC machines
2.11. Spindle drives DC drive AC drive and linear induction motors
2.12. Slide ways types with illustrations
2.13. Bearings linear motion bearings recirculatory ball screws
2.14. Automatic tool change working of tool magazine
2.15. Feedback devices encoders linear transducers
3. CNC Part programming
3.1. CNC program procedure coordinate system reference points zero points
3.2. Preparatory and miscellaneous functions (G & M codes)
3.3. Methods of part programming manual and APT programming
3.4. Tool information speed feed data
3.5. Interpolation linear and circular
3.6. Macros subroutines canned cycles mirror image thread cutting cycles
3.7. Programming Practice problems on turning jobs
4. CIMS & FMS
4.1. Computer integrated manufacturing system definition features necessity
4.2. Flexible manufacturing system definition features necessity
4.3. Components of FMS functions of each component illustration
4.4. Advantages and limitations of FMS
4.5. Coordinate measuring machine Introduction, CMM and CNC CMM main
features of CNC CMM Scanning Digitization Advantages.
5. Robotics
5.1. Definition of robot classification features necessity
5.2. Components of robot illustration functions of each component
5.3. Manipulator illustration degrees of freedom
5.4. End effectors - types with illustration necessity and application
5.5. Industrial application of robots advantages and limitations
5.6. Artificial intelligence introductory treatment only
REFERENCE BOOKS:
1. Computer Integrated Design And Manufacturing,McGraw HillBedworth David. D
2. Computer Integrated Manufacturing, PHI Paul G. Ranky
3. Industrial Robotics, PHI Gordon. N. Mair
4. Numerical Control And Computer Aided Manufacturing
T.K.Kundra,P.N.Rao(TMH)
5. Computer Aided Manufacturing,T. K. Kundra, P.N. Rao (MGH Publishers)
6. CNC Machines, New AgeB.S. Pabla and M. Adithan
VI-16
MEASUREMENT & CONTROL SYSTEMS

Subject Title
Subject Code
Periods per week
Period per semester
:
:
:
:
Measurement & Control Systems

M 605
05
75
TIME SCHEDULE
Sl
No.
Major Topics
No. of
periods
Weightage of
marks
Short
Answer
Questions
Essay
Type
Questions
1.
Measuring Instruments &

their Characteristics
12
16
02
01
2.
Measurement errors
06
13
01
01
3.
Transducers
20
26
02
02
4.
Measurement of Angular
Speed, Temperature,
Pressure and Flow
25
39
03
03
5.
Control Systems
12
16
02
01
75
110
10
08
TOTAL
OBJECTIVES
Up on completion of the course the student shall be able to:
1. Understand the Measurement systems & their characteristics
1.1 Define Measurement
1.2 Explain the Significance of measurement
1.3 Methods of MeasurementsExplain
a.Direct and Indirect
b.Primary ,Secondary and Tertiary
c.Contact and Non-contact
1.4 Classify Instruments
1.5 List the Instruments and Measuring Systems-Its Functions
1.6 List the Applications of measurement systems
1.7 List the Instrument characteristics (Static & Dynamic)
Explain Static Characteristics:
1.7.1 Scale range and scale span
1.7.2 Scale readability
1.7.3 Repeatability and reproducibility
1.7.4 Drift
1.7.5 Noise- signal to noise ratio- sources of noise
1.7.6 Accuracy and precision
1.7.7 Static sensitivity
VI-17
1.7.8 Linearity
1.7.9 Hysteresis
1.7.10 Threshold
1.7.11 Dead time and dead zone
1.7.12 Resolution or discrimination
Explain Dynamic Characteristics:
1.7.13 Speed of response and measuring lag
1.7.14 Fidelity and dynamic error
1.7.15 Overshoot
2. Understand the Measurement Errors
2.1 Explain the scope of Errors
2.2 Classify errors and explain
2.2.1 Instrument errors
2.2.2 Environmental errors
2.2.3 Translation and signal transmission errors
2.2.4 Observation errors
2.2.5 Operational errors
2.2.6 System interaction errors
2.3 Factors to be considered for selecting an instrument
3. Understand the Transducers
3.1 Define Transducer
3.2 Explain Mechanical detector-transducer elements
3.2.1 Elastic elements
3.2.2 Mass sensing elements
3.2.3 Thermal detectors
3.2.4 Hydro-pneumatic elements
3.3 Classify Transducers
Explain
3.3.1 on the basis of transduction form used,
3.3.2 Primary and secondary transducers
3.3.3 Passive and active transducers
3.3.4 Analog and digital transducers
3.4 Explain Resistive transducer, piezo electric transducer, capacitive
transducer
3.5 Define Strain gauges
3.5.1 List the requirements of strain gauge
3.5.2 Explain the types of strain gauges
3.5.3 Explain unbounded metal strain gauges
3.5.4 Explain Bonded metal wire strain gauges
3.5.5 Explain Bonded metal foil strain gauges
3.5.6 Explain Bonded semiconductor strain gauges
3.6 Explain Rosettes
4. Understand the Measurement of Angular Speed, Temperature, Pressure and
Flow
Measurement of angular speed
4.1 List the types of Tachometers
VI-18
4.2 Explain the working principle of following Tachometers with a legible

sketch
4.2.1 Mechanical Tachometers-Revolution counter and
timer, slipping Clutch Tachometer
4.2.2 Electrical Tachometers-Drag cup tachometer, and
Tachogenerator
4.2.3 Contactless Electrical Tachometer-Inductive pickup, and
Capacitive, pickup tachometer
Measurement of Temperature
4.3 List the types of Thermometers
4.3.1 Explain Liquid in glass thermometer
4.3.2 Explain Bimetallic thermometer
4.3.3 Explain Thermocouples
4.3.4 Explain Thermistor
4.3.5 Explain Pyrometers-Radiation and Optical
Measurement of Pressure
4.4 List the Types of pressure measurement devices
4.4.1 Explain Bourdon tube pressure gauge
Measurement of Flow
4.5 List the Types of Flow meters
4.5.1 Explain Rota meters
4.5.2 Explain hot wire anemometer (constant temp and constant
Current)
4.5.3 Explain Ultrasonic flow meter
5. Understand the Control Systems
5.1 Explain the Concept of a control system
5.2 List the Elements of Control Systems
5.3 Classify control systems5.4 Explain the following with legible sketch
5.4.1 Open loop and Closed loop systems
5.4.2 Servo mechanisms
5.4.3 Rotational system
5.4.4 Electrical systems
5.4.5 Analog systems
5.4.6 Pneumatic controller
5.4.7 Pneumatic relay, Pneumatic Actuator
5.4.8 Hydraulic control systems
5.5 List the Applications of Pneumatic control systems
COURSE CONTENT
1. Measurement systems & their characteristics
Definition of Measurement, Significance, Methods of Measurements,
Classification of Instruments, Instruments and Measuring Systems-Its
functions,
Applications of measurement systems, Instrument characteristics (Static &
Dynamic)
VI-19
2. Measurement of Errors
Classification of errors- Instrument errors, Environmental errors, Translation and
signal transmission errors, Observation errors, Operational errors, System
interaction errors, Factors to be considered for selecting an instrument
3. Transducers
Mechanical detector-transducer elements, Transducer-Classification of
Transducers, Resistive transducer, piezo electric transducer, capacitive
transducer, Strain gauges -requirements of strain gauge-types, Rosettes
4. Measurement of Angular Speed, Temperature ,pressure and Flow
Measurement of angular speed-Tachometers, Mechanical TachometersElectrical Tachometers-Contactless Electrical Tachometer
Measurement of Temperature-Thermometer, Liquid in glass thermometer,
Bimetallic thermometer, Thermocouples, Thermistor, Pyrometers-Radiation and
Optical
Measurement of Pressure-Types , Bourdon tube pressure gauge
Measurement of Flow- Rotameters, Hot wire anemometer(constant temp and
constant current) and Ultrasonic flow meter
5. Control Systems
What is a control system- Classification, Open loop and Closed loop systemsServo mechanisms-Rotational systems- Electrical systems-Analog systemsPneumatic controller-Pneumatic relay- Pneumatic Actuator-Hydraulic control
systems
Elements of Control Systems
Applications of Pneumatic control systems
REFERENCE BOOKS :
1.
2.
3.
4.
5.
6.
Mechanical Measurements and Instrumentation & Control A.K.Sawhney

Puneet Sawhney (Dhanpat Rai & Co)
Mechanical Measurements & Control-Dr.D.S.Kumar
(Metropolitan book co.Pvt.Ltd)
Mechanical Measurements & Control-- R.V.Jalgaonkar
Instrumentation Devices & Systems -- C.S.Narang
Mechanical & Industrial Measurements -- R.K.Jain
Instrumentation,Measurement and Analysis -- B.C.Nakra and Chaudhry
VI-20
AUTOMOBILE ENGINEERING
Subject Title
Subject code
No. of periods/week
Periods/Semester
S.No
:
:
:
:
Major Topics
Introduction &
Chassis
Construction
Transmission &
Clutches
Automobile Engineering
M-606
04
60
TIME SCHEDULE
Number
Weightage
of
of Marks
Periods
Essay
Type
Short
Answer
Questions
Questions
10
16
16
32
Propeller shaft and

rear axle
10
18
Suspension system
06
13
Front axle and

steering
12
18
Brakes
06
13
60
110
10
08
2
3
Total
OBJECTIVES
1.0
Understand the concept of automobile

1.1
List the various components of an automobile.
1.2
Explain the function of basic structure, power plant, transmission system,
auxiliaries, controls of the automobiles.
1.3
List the various types of Chassis construction.
1.4
Explain conventional Chassis construction with a legible sketch
1.5
Explain Frame construction.
1.6
List the materials for frame
1.7
List the Defects in Frames.
1.8
Explain the frameless construction.
2.0
Understand the Transmission &Working principle of Clutches

2.1
Define the term Transmission.
2.2
State the Functions of transmission system.
2.3
Explain the Concept of total resistance to the vehicle motion tractive
effort- Necessity of transmission.
2.4
List the Types of gear boxes.
2.5
Explain the Selector Mechanism with legible sketch
VI-21
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
Explain the Lubrication of gear box.

State the requirements for the effective functioning of Clutch.
List the Components of clutch.
Explain Mechanical operation of clutch.
List the main types of clutches.
State the Principle of friction clutches.
List the Different types of dry friction clutches.
Explain the Hydraulically operated (Fluid type) clutch with legible
sketch
3.0
Understand the function of Propeller Shaft and rear axle.

3.1
State the functions of propeller shaft.
3.2
Explain construction of propeller shaft.
3.3
Know about various universal joints in automobile
3.4
Functions and operation of a differential i n an automobile.
3.5
Sketch general arrangement of a live rear axle
3.6
Identify loads on rear axle.
3.7
Identify different methods of supporting rear axle.
3.8
Distinguish between semi-Floating and fully floating rear axle.
4.0
Understand the working of Suspension System

4.1
List the Objectives of vehicle suspension.
4.2
List the various factors considered for suspension
4.3
List the different types of suspension springs
4.4
Explain the Construction details of leaf spring and its mounting on front
and rear axles with legible sketch.
4.5
List the Different types of rubber springs.
4.6
Explain air suspension system with legible sketch.
4.7
Explain the principle of shock absorber.
4.8
Explain the construction details and working of a telescopic type of
shock absorber with legible sketch.
5.0
Understand the function of Front Axle and Steering.

5.1
Define the terms Front Axle and Steering.
5.2
Define Stub Axle type.
5.3
Explain the Front wheel assembly
5.4
List the Factors of wheel alignment.
5.5
Explain the Balance of wheels-Inflation of tyres- Brake Adjustment.
5.6
Explain the Steering geometry
5.7
List Steering linkages.
VI-22
5.8
5.9
5.10
5.10
5.11
6.0
Write correct steering angle.

Explain the Steering mechanism with legible sketch
Explain cornering force Self righting torque.
Explain under steering over steering.
Write the Principle of power steering.
Understand the function of Brakes

6.1
List the requirements of automobile brake.
6.2
Explain the transfer of weight during braking operation.
6.3
Explain the wheel skidding and techniques to prevent wheel
Skidding.
6.4
Various factors influencing braking effect.
6.5
Classify the brakes.
6.6
Describe t h e mechanical shoe brake with legible sketch.
6.7
Draw a simple diagram to show the layout of a hydraulically operated
four wheel brake system and explain its working in detail.
6.8
Draw a schematic diagram showing the layout of complete air pressure
system of brakes and explain the working of its main units in detail.
COURSE CONTENT
1.0 Introduction & Chassis construction
1.1
Identify the various components of an automobile.
1.2
T he basic structure, the power plant, transmission
System, the auxiliaries the controls and the superstructure of an
automobile.
1.3
Different types of Chassis construction.
1.4
The functions of the Frame.
1.5
The loads on the frame,
1.6
Frame construction with a neat sketch.
1.7
Identification of various materials for frame.
1.8
Sub frames and defects in frames.
1.9
Frameless construction with a sketch.
2.0
Transmission and Clutches

2.1
Introduction and Functions of transmission system
2.2
Concept of total resistance to the vehicle motion Tractive effort
necessity of transmission.
2.3
Working of Sliding mesh Constant mesh Synchromesh gear boxes.
2.4
Working of selector mechanism with gear lever on top of transmission
case.
VI-23
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
2.13
3.0
Lubrication of gear box.

Functions of clutches.
Requirements of Clutch.
Brief description of Components of clutch, clutch plate- clutch facing
pressure plate Springs Bearings.
Mechanical operation of clutch.
Main types of clutches (friction clutch and fluid clutch only)
Principle of friction clutches coefficient of friction (), Axial Pressure
(w) and mean radius of contact surfaces(R)
Description and working of dry friction clutches Single plate multi
plate.
Working of Hydraulically operated single plate clutch.
Propeller Shaft and rear axle.

3.1
The functions of propeller shaft.
3.2
The construction of propeller shaft with a neat sketch.
3.3
Various universal joints in automobiles.
3.4
The function and operation of differential in an automobile.
3.5
The general arrangement of a live rear axle.
3.6
Different loads on rear axle.
3.7
Different methods of supporting rear axle shafts with sketch.
3.8
The difference between semi-floating and fully floating rear axle.
4.0
Suspension System
4.1
The objectives of vehicle suspension
4.2
The factors to be considered for suspension system.
4.3
Different types of suspension springs.
4.4
The construction of leaf spring and how it is mounted on rear and
front axles with neat sketch.
4.5
Different types of rubber springs.
4.6
The action of air springs
4.7
The schematic diagram showing the layout of an air
suspension system and describe its working
4.8
The principle, construction and working of a telescope type of shock
absorber.
5.0
Front Axle and Steering

5.1
Introduction to front axle.
5.2
Stub axle connection- ELLIOT Reversed ELLIOT LAMOINE Reversed
LAMOINE brief Description.
VI-24
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6.0
Description of front wheel stub axle assembly.

Factors influencing of wheel alignment .
Factors pertaining to wheels Balance of Wheels - Inflation of tyres
Brake adjustment-Concept of Steering Geometry Camber Kingpin
Inclination combined angle - castor Toe-in & Toe-out.
Steering linkage principle of correct steering angle (without
mathematical analysis) simple equation
Details of Ackerman steering mechanism.
Concept of cornering force-self righting torque.
Concept of under steering & over steering.
Brakes
6.1
The requirements of a automobile brake.
6.2
The transfer of weight during braking operation.
6.3
The wheel skidding and describe techniques to prevent wheel
Skidding.
6.4
Various factors influencing braking effect.
6.5
Classification of brakes.
6.6
The mechanical shoe brake with a neat sketch.
6.7
T he layout of a hydraulically operated four wheel brake system
with a simple diagram and explain its working in detail.
6.8
The schematic diagram showing the layout of complete air brake
system and explain the working of its main units in detail.
REFERENCE BOOKS:
1. The motor vehicle
2. Automotive Chassis
3. Mechanism of the car
4. Automotive mechanism
5. Automotive Engineering
VI-25
Newton steeds & Garret

P.M. Heldt.
A.W. Judge
Joseph Heitner.
G.B.S. Narang
CAM LAB PRACTICE

Subject Title
Subject Code
Periods/ week
:
:
:
:
CAM Lab Practice

M-607
06
90
OBJECTIVES
1.
Identify the parts and functions of CNC lathe
2.
Use incremental system and absolute system on dimensioning.
3.
Write simple part program using G-Codes and M-Codes.
4.
Edit and execute a part program using CNC lathe machine simulation
package.
5.
Prepare part program as per the drawing.
6.
Produce part as per the drawing using CNC lathe machine.
COURSE CONTENT
1.
CNC Introduction
2.
Study of turning.
3.
G codes and M- codes
4.
Simulation software practice.
5.
Structure of program.
6.
Turning exercise step turning using canned cycle.
7.
Turning exercise circuits interpolation CW, CCW.
8.
Turning Exercise - Taper turning and Peck drilling.
9.
Turning exercise Thread cutting and grooving.
Note: The simulation software available in the market:

FANUC, SIEMENS, HI NUMERIC, GSK etc.,
VI-26

Exercise
Hands on practice on
CNC machine
A. Identify the various parts and switches

B. Operate the various parts and knobs of the
machine - Switch on / off
Practice turning
Operation on CNC
machine
A. Use incremental system and absolute

system of co-ordinate system
B. Use appropriate tools for turning
C. Select the speeds and feeds used for
turning
D. Select the depth of cut to be employed
Use G-Codes and MCodes to write part

program
A. Identify the preparatory and miscellaneous

functions of CNC
B. Understand the meanings of various GCodes and M-Codes
C. Identify frequently used G-Codes and MCodes
A. Understand the concept of simulation
B. Practice the setting of software in
simulation mode
C. Open an existing part program
D. Practice simulation for the program
A. Understand the block numbers
B. Understand various steps in the program
Practice with
Simulation software
Read the Structure of

program
Practice step
turning canned cycle
( Turning exercise)
A. Understand the canned cycle

B. Write a part program to produce the part as
per the given drawing
C. Enter the program in the software
D. Fix the job and set the tool
E. Select proper cutting speed, depth of cut
and feed for the given job
F. Simulate the program and edit if necessary
G. Execute the part program
Practice Turning
exercise circuits
interpolation
CW, CCW
A. Understand interpolation
B. Use the codes for interpolation in part
program
C. Write and enter the program in the system
D. Simulate and execute the program
VI-27
Exercise
8
Practice Turning
exercise
Taper turning and
Peck drilling
Practice Turning
exercise
Thread cutting and
grooving

A. Select proper values of cutting speeds and
feeds for taper turning and peck drilling
B. Write part program for taper turning and
peck drilling as per the given drawing
C. Select suitable cutting tools for the two
operations separately
D. Fix the tools in the turret
E. Fix the job
F. Simulate and edit the part program if
necessary
A. Select proper values of cutting speeds and
feeds for Thread cutting and grooving
B. Write part program for Thread cutting and
grooving as per the given drawing
C. Select suitable cutting tools for the two
operations separately
D. Fix the tools in the turret
E. Fix the job
F. Simulate and edit the program if necessary
VI-28
THERMAL ENGINEERING & REFRIGERATION AND AIR CONDITIONING

LABORATORY PRACTICE
Subject Title
Subject Code
Periods per Week
:
:
:
Thermal Engineering& Refrigeration and Air

Conditioning Lab Practice
M 608
03
45
A.THERMAL ENGINEERING LABORATORY PRACTICE

TIME SCHEDULE
Economic Speed Test
Number of
Periods
03
Water Cooling Curves
03
Morse Test
03
Performance Curves
06
Heat Balance Sheet
06
Mercet Boiler
03
S.No
Name
Total
24
OBJECTIVES
1. Understand the importance of economic speed of given S.I. / C.I. engine.
1.1
Identify the type of engine and its parts
1.2
Circulating cooling water through the engine jacket before starting
the engine and after shutting the engine
1.3
Cranking the engine and operating decompression lever
1.4
Maintain constant load
1.5
Varying the fuel supply by operating the lever
1.6
Record the corresponding readings of fuel consumption and
speed
2. Appreciate the importance of drawing water cooling curves on IC engines.
2.1
2.2
Circulate cooling water through the engine jacket before starting
2.3
Crank the engine and operating decompression lever
2.4
Maintain constant load and speed
2.5
Control flow rate of cooling water into the engine
2.6
Record the readings of cooling water temperatures at inlet and
outlet.
2.7
Record the fuel consumption rate by using stop watch
VI-29
3. Understand the importance of Morse test on multi-cylinder petrol / diesel

engine
3.1
Identify the type of engine
3.2
3.3
3.4
Vary the load
3.5
Maintain constant speed
3.6
Disconnect engine cylinders one by one by operating the lever
3.7
Record the readings in spring balance without parallax error
4. Understand the importance of performance characteristics of given IC
engine.
4.1
4.2
4.3
4.4
Vary the load
4.5
Record the load
4.6
Record the speed by using tachometer
4.7
Handle the stop watch for measuring time for 10c.c consumption
of fuel
4.8
Draw the graphs (B.P. Vs R.P.M., B.S.F.C. Vs R.P.M., B.M.E.P.
Vs R.P.M., Mechanical Efficiency Vs R.P.M.,)
5. Understand the importance of heat balance of given IC engine.
5.1
5.2
5.3
5.4
Adjust the load
5.5
Identify the cooling water inlet and outlet
5.6
Record the reading of cooling water temperature at inlet and outlet
5.7
Record time taken for 10c.c fuel consumption
5.8
Record exhaust gas temperature
5.9
Calculate on of quantity of heat liberated by the fuel and the heat
equivalent of brake power, heat carried away the jacket cooling
water and heat carried away by the exhaust gases.
6. Appreciate the pressure Vs temperature relationship of saturated steam by
using Mercet Boiler.
6.1
Identify type of boiler and various parts of it.
6.2
Heat the water filled in boiler drum by using Bunsen burner
6.3
Identify the formation of saturated steam
6.4
Record the readings of pressure and temperature
6.5
Draw the graph between Pressure Vs Temperature.
VI-30
COURSE CONTENT
1.
2.
3.
4.
5.
6.
Economic speed Test.

Water cooling curves.
Morse test on petrol / diesel engine.
Performance curves.
Heat Balance Sheet.
Investigation of Pressure Vs Temperature relationship of saturated steam by using
Mercet boiler.
Key competencies Expected from the student for Thermal Engineering Lab
(M-608A)
S.No
Exercise
Economic speed Test
Water cooling curves
Morse test on multicylinder diesel / petrol

engine
Key competency
a. Circulate cooling water through the
engine jacket before starting the engine
and after shutting the engine
b. Maintain a constant load
c. Vary the fuel supply by operating the
lever
d. Record the corresponding readings of
fuel consumption and speed
a. Identify valve to allow cooling water into
the engine
b. Maintain constant load and speed
c. Record load and speed
d. Control flow rate of cooling water into the
engine
e. Record the readings of cooling water
temperatures at inlet and outlet.
f. Record the fuel consumption rate by
using stop watch
g. Draw graphs (s.f.c. Vs exit temperature
of cooling water)
a. Vary the load
b. Maintain constant speed
c. Disconnect engine cylinders one by one
by operating the lever
d. Record the readings in spring balance
without parallax error
VI-31
Performance curves
a.
b.
c.
d.
e.
a.
Heat balance sheet
b.
c.
d.
e.
f.
Mercet boiler
Vary the load

Record the load
Record the speed by using tachometer
Handle the stop watch for measuring time
for 10c.c consumption of fuel
Draw the graphs (B.P. Vs R.P.M.,
B.S.F.C. Vs R.P.M., B.M.E.P. Vs R.P.M.,
Mechanical Efficiency Vs R.P.M.,)
Allow cooling water to enter the cylinder
jacket.
Adjust the load
Record the load and speed
Record the reading of cooling water
temperature at inlet and outlet
Record time taken for 10c.c fuel
consumption
Record exhaust gas temperature
a. Record the readings of pressure and

temperature
b. Draw the graph between pressure Vs
temperature.
VI-32
B. REFRIGERATION & AIR CONDITIONING LAB PRACTICE

TIME SCHEDULE
S.No
1
2
3
4
5
6
7
R & AC Lab
Number
Periods
Familiarisation with R&AC Tools Basic Operations on soft Copper
03
tube
C O P of Vapour Compression cycle test rig
03
C O P of domestic refrigerator test rig
03
C O P of water cooler test rig
03
Leak detection of refrigeration equipment
03
Evaluate the C.O.P. of A.C. system
03
Vaccumisation and Charging of compressor
03
Total
21
OBJECTIVES
1. Identify various tools used in R&AC
2. Perform basic fabrication operations viz., flaring, swaging, bending and brazing
on soft copper tubes.
3. Identify the various components of a Vapour Compression cycle test rig and to
draw the refrigerant circuit and the electrical circuit.
4. Evaluate the c.o.p of a given Vapour Compression cycle test rig.
5. Evaluate the c.o.p of a Domestic Refrigerator test rig
6. Evaluate the c.o.p of a water cooler test rig
7. Identify various types leak detection methods of a refrigeration system
a. Detect the leakages of given vapour compression refrigeration system by
using soap solution method.
b. Apply the methods of arresting leakages
c. Arrest the leakages if any by soldering
8. Evaluate the C.O.P. of given air-conditioning system
9. Apply the method of vaccumization and refrigerant charging for a given vapour
compression system.
a. Evacuate the given V.C.R. system using a vacuum pump
b. Charge the given V.C.R. system by using suitable refrigerant gas
c. Run the system for at least 15 min. and check for the build up of pressure
in the pressure gauge.
VI-33
of
Key competencies Expected from the student for M-608B Refrigeration & Air
Conditioning Lab
S.No
1
Exercise
Basic fabrication
operations on soft
copper tube
C O P of Vapour
Compression cycle test
rig.
C.O.P. of domestic
refrigerator test rig
C.O.P. of water cooler

test rig
Key competency
a. Use the tools to perform flaring, swaging,
bending and brazing operations
a. Identify the components of vapour
compression system
b. Record the values of pressure and
temperature when the pressure gauges
are stabilized
c. Record the energy meter reading
d. Read the values from Pressure Vs
Enthalpy diagram of the given refrigerant
e. Evaluate c.o.p
a. Identify the components of domestic

refrigerator test rig.
are stabilized
d. Read the enthalpy values from Pressure
Vs Enthalpy diagram of the given
refrigerant
e. Evaluate c.o.p
a. Identify the components of water cooler
test rig.
are stabilized
d. Read the enthalpy values from Pressure
refrigerant
e. Evaluate c.o.p
VI-34
Leak
detection
of
refrigeration equipment
Evaluate C.O.P. of A.C.

system
Vacuumization and
charging of refrigeration
system
a. Apply soap solution over suction lines,

discharge lines and various joints
b. Detect the leaks by observing the air
bubbles
c. Arrest the leaks if any by using soldering
a. Identify the components of given vapour

compression air-conditioning test rig.
b. Insert thermometers in suction line and
discharge line
c. Run the given V.C. A.C. system for some
time
d. Record the pressure and temperature
readings when the pressure gauges are
stabilized.
e. Record the energy meter reading
f. Read the enthalpy values from Pressure
refrigerant
g. Evaluate c.o.p
a. Detect the leaks in the given refrigeration
system
b. Arrest the leaks if any
c. Evacuate the system by using a vacuum
pump
d. Charge the system by suitable refrigerant
gas
e. Run the system for some time and check
for the build up of pressure by observing
the pressure gauge reading.
COURSE CONTENT
1.
2.
3.
4.
5.
6.
7.
Basic fabrication operations on soft copper tube.

Determination of COP of Vapour Compression cycle test rig.
Determination of COP of domestic refrigerator test rig.
Determination of COP of water cooler test rig.
Leak detection of refrigeration equipment.
Conduct a performance test on given air-conditioning system and evaluate
C.O.P. of the system.
Vaccumization & Charging, pressure testing of given refrigeration system.
VI-35
MANUFACTURING /SERVICING AND MAINTANANCE LAB PRACTICE

Subject Title
Subject Code
Periods/Week
:
:
:
Manufacturing /Servicing
and Maintenance Lab Practice
M-609
03
45
Objectives
A. Understand various operations in machine shop
1.
Practice the cutting operation on slotter
2.
Practice the cutting operation on planer
3
Practice the principle of indexing on milling machine.
4
Perform Cutting operation on milling machine
5
Perform Cutting operation on V-block on shaping machine.
B. Understand various operations in Welding
1.
Produce utility articles such as shoe rack, garden chair, wash basins,
stools etc
C. Understand various operations in Foundry
1.
Prepare a mould for flange coupling.
2.
Understand the operation of cupola and pit furnace.
3.
Prepare a metal casting of simple objects in Aluminium.
D. Understand various activities in servicing and maintenance
1.
Use the servicing methods of IC-Engine parts.
2.
Overhaul petrol and diesel Engines.
3.
Locate faults and rectify the same.
4.
Select Appropriate recovery methods for a given machine elements and
Performing recovery processes by using appropriate methods such as
Arc/gas welding, metal spraying, applying adhesives etc.,
5.
Use the servicing methods of sewing machine, pumps
6.
Use the testing and inspection methods of machine tools.
7.
Dismantle and assemble machine tools.
8.
Recondition the parts.
9.
Service and overhaul machine of general nature.
10.
Prepare maintenance schedules and estimates.
COURSE CONTENT
A. Machine Shop
1. V-Block, 2. Gear Cutting on Milling Machine, 3.Splines on Slotting Machines,
4. Practice on Planning machines, 5.Key way cutting, 6.Various Milling
operations,7.T-slot cutting on milling machine
VI-36
B. Welding
1.Shoe Rack 2. Garden Chair. 3. Stools 4. Pot Stands etc.,
C. Foundry
1.Solid bearing 2. Flange coupling 3.Operation of cupola 4. Metal casting and
fettling.
D. Service and Maintenance
Carburettor, Injectors , Piston Assembly , Gear Box, Clutch , Valve Assembly,
Propellar Shaft and Universal Joint, Differential , Axles etc.,
Sub assembly of small components such as, Tail stock, checks of lathes, 3-jaw
chuck,4-jaw chuck. Measurement of wear on M/c elements such as, lathe beds,
guide ways &shapers. Selection of appropriate recovery methods for a given M/c
element and performing recovery processes by using appropriate methods such
as: Arc/Gas Welding, Metal spraying, Applying adhesives etc. Fault finding and
repairs of equipment such as machine tools, washing machines. Maintenance of
various machine tools & engines including preparation of preventive
maintenance schedule of a typical workshops .
VI-37

S.No
Exercise
1.
Key way cutting by

slotting machine
A. Fix the job on slotting machine table

B. Set the tool and give the table feed
C. Set the stroke of the ram
2.
Indexing on slotting /
milling machine
A.
B.
C.
D.
3.
T-slot cutting on milling

machine
A. Identify T-slot cutter

B. Exact setting of work-tool location
Bevel / Helical gear

cutting on milling
machine
A. Calculate no. of teeth on meshing gears

for compound indexing
B. Identify suitable HOB
C. Select suitable holder for bevel gear blank
A. Select
suitable
dismantling/assembly
tools.
B. Identify the problem
C. Rectify the defect
D . Select suitable lubricant.
E. Locate lubricating points.
4.
Servicing of Carburetor,
Injectors, Piston,
assembly, Gear Box,
Clutch , Valve Assembly,
Propeller Shaft and
Universal Joint,
Differential , Axles etc.,
Assembly of small
components such as,
Tail stock, chucks of
Lathes, 3-jaw chuck,
4-jaw chuck.
Identify of suitable indexing method

Calculate revolutions of indexing crank
Select index plate
Select of hole circle
A. Select
suitable
dismantling/assembly
tools.
B. Identify the problem
C. Rectify the defect
D. Select suitable lubricant.
E. Locate lubricating points.
VI-38
PROJECT WORK
Subject Title
Subject Code
Periods/Week
Periods/Semester
:
:
:
:
Project work
M-610
06
90
OBJECTIVES
1.0
1.1
1.2
1.3
1.4
Prepare technical project report.

Identify component with mechanical bias.
Design and draw the production drawings.
Prepare a project report with details of materials, processes etc.
Develop a proto type/model of the product with the facilities available in
polytechnic.
2.0
2.1
2.2
2.3
Conduct survey to establish a small scale unit.

Identify and select a product with an aim to set up a small scale industry.
Conduct a detailed market survey.
List the raw materials, equipment and tools needed for the manufacture of a
specified quantity.
Explore the various financial arrangements to start the manufacture of a
product under technocrat scheme in small scale industrial sector.
Make a survey of requirements of the department of industries, municipal,
health, inspectorate of factories for staring an industry.
Plan for a type of organisation.
Select a site.
Prepare a techno feasibility report consisting of drawings, plant layouts, building
requirements, machinery and equipment requirements, raw material, labour,
production and administrative staff requirements, working capital, material flow
sheet, cash flow sheet, financial analysis etc.
Develop working models to show scientific and engineering principles studied in
the curriculum and repair, up gradation and maintenance of equipment which are
exist.
2.4
2.5
2.6
2.7
2.8
3.0
COURSE CONTENT
The following activities are envisaged in this course at study
1.
2.
3.
4.
5.
6.
Identification and selection of a product with an aim to set small scale industry.
Conduct of detailed market survey.
Preparation of production drawings.
List of the raw materials, equipment and tools needed for manufacturing a
specified quantity.
Development of a prototype model of the product in workshop (if possible) with
the available facilities in the Polytechnics.
Exploration of the various financial arrangements to start the manufacturing of
the product under technocrat scheme in small scale industrial sector.
VI-39
7.
8.
9.
10.
11.
Detailed survey of requirements of the department of industry, municipal, health

inspectorate of factories, electrical inspectorate, banks, other financial agencies
etc., for starting an industry.
Planning for type of organisation.
Selection of site.
Preparation of techno feasibility report consisting of production drawings, plant
layout, building requirements, equipment requirement, list of raw materials and
their availability, tools and other items, labour force production, ministerial staff
requirement, material flow sheet, cash flow sheet, financial analysis etc.
Working models, repairs up gradation maintenance of equipment.
Note: 1.
Product selection may be done by the Polytechnic in consultation

with the local industries and other agencies.
The student should submit techno feasibility report on a product selected

with an aim to set up an industry in small scale sector.
Project work
Technical project report
A. Select a Product
B. Design a product
C. Prepare production drawings as per
design
D. Develop prototype model of product
E. Prepare technical project report
Conduct survey to establish a

small scale unit
A. Conduct market survey to identify

product to be produced
B. Prepare feasibility report of product
C. Convince financial organizations
D. Approach government agencies for
technical and financial help
E. Learn leadership qualities
Develop working models and

upgrade/repair existing
equipment
A. Develop working model using scientific

and engineering principles
B. Repair equipment of existing machines
VI-40

Dme C14 PDF

Uploaded by

Copyright:

Available Formats

Dme C14 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Dme C14 PDF

Uploaded by

Copyright:

Available Formats

DIPLOMA IN MECHANICAL ENGINEERING

SCHEME OF INSTRUCTIONS AND EXAMINATIONS

Rationale and Scope

Extend their vocabulary in the direction of their future needs

Learn various grammatical structures

Read and comprehend English

Learn to excel in various forms of written communication (writing composition

Practice spoken communication suited to various situations.

Unit IV : Differential Calculus

Unit - V : Applications of Differentiation

Maxima and Minima

Distinguish natural logarithms and common logarithms.

Explain the meaning of e and exponential function.

State logarithm as a function and its graphical representation.

Use the logarithms in engineering calculations.

Resolve Rational Fraction into sum of Partial Fractions in engineering problems

Use Matrices for solving engineering problems

Define a matrix and order of a matrix.

Compute sum, scalar multiplication and product of matrices.

Illustrate the properties of these operations such as associative, distributive,

Define the transpose of a matrix and write its properties.

Define symmetric and skew-symmetric matrices.

Expand the determinant of a 3 x 3 matrix using Laplace expansion formula.

Distinguish singular and non-singular matrices.

Apply the properties of determinants to solve problems.

Solve system of 3 linear equations in 3 unknowns using Cramers rule.

Compute adjoint and multiplicative inverse of a square matrix.

Solve system of 3 linear equations in 3 unknowns by matrix inversion method

State elementary row operations.

Solve a system of 3 linear equations in 3 unknowns by Gauss- Jordan method

List the values of trigonometric ratios at specified values.

Draw graphs of trigonometric functions

Explain periodicity of trigonometric functions.

tan 150 , tan750 etc.

Derive identities like sin(A+B) sin(A-B) = sin 2 A sin2 B etc.,

Solve simple problems on compound angles.

Derive useful allied formulas like sinA= (1- cos2A)/2 etc.,

Solve simple problems using the above formulae

Derive relations between inverse trigonometric functions so that given A= sin-1x,

State various properties of inverse trigonometric functions and identities like

Derive formulae like tan x tan y tan

Solve simple problems.

10.0 Appreciate Properties of triangles and their solutions

List various formulae for the area of a triangle.

Solve problems using the above formulae.

Represent the Hyperbolic Functions in terms of logarithm functions

Represent inverse hyperbolic functions in terms of logarithms.

12.0 Represent Complex numbers in various forms

Define the operations on complex numbers with examples.

Define amplitude of a complex number

Represent the complex number in various forms like modulus-amplitude (polar)

14.0 Solve the problems on Circles

Find the equation of a circle given

Center and radius

Two ends of a diameter

Centre and a point on the circumference

Three non collinear points

Centre and tangent

Write the equation of tangent and normal at a point on the circle.