Mines

maxgputemp 90
stratumproxy enabled
proxywallet 0x1369bBC946541e808630b8B4b17abb3cC6E3262e
proxypool1 us1.ethermine.org:4444
proxypool2 us2.ethermine.org:4444
flags --cl-global-work 16384 --farm-recheck 200 -G 2
globalfan 95
globalpowertune 0
# !!!!!!!!!!!!! IMPORTANT NOTICE !!!!!!!!!!!!!!!!!!
#
# If you are just starting out, please note:
#
# All lines with a pound sign are comments, they are ignored by all scripts.
#
# 1. Set ethOS to single rig mode: http://ethosdistro.com/kb/#single-rig
# 2. In /home/ethos/local.conf , change "0x0bdC4F12fB57d3acA9C3cF72B7AA2789A20d2
7f2" to your wallet.
# 3. Reboot, and you are all set.
#
# Read the ethOS knowledge base, a useful guide to getting set up: http://ethosd
istro.com/kb/
# Read the ethOS changelog for version information and latest changes: http://et
hosdistro.com/changelog/
#
# NOTE: There is no email or skype support for ethOS. Please see the 'Getting Su
pport' section of the ethOS knowledge base.
#
# WARNING: Using apt-get to upgrade, update, and/or install packages is unsuppor
ted and will likely break ethOS.
#
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#
# EXAMPLES
#
# example config settings that apply to all rigs:
#
# maxgputemp 85
# stratumproxy enabled
# proxywallet 0x0bdC4F12fB57d3acA9C3cF72B7AA2789A20d27f2
# proxypool1 us1.ethermine.org:4444
# proxypool2 us2.ethermine.org:4444
# flags --farm-recheck 200
# globalcore 1000
# globalmem 1250
# globalfan 90
# globalpowertune 10
# autoreboot true
# custompanel publicsecret
#
#
# example config settings that apply to "class of GPU" (based on GPU bios name)
# 113-C6711101-100 is a sample GPU bios name, change it to your own GPU bios nam
e, see below for documentation.
# GPU bios names are listed at the bottom of your ethosdistro.com stats panel.
#
# cor 113-C6711101-100 1050
# mem 113-C6711101-100 1250
# fan 113-C6711101-100 100
# pwr 113-C6711101-100 50
# vlt 113-C6711101-100 1.118
#
#
# example config settings that apply to individual rigs (and their respective in
dividual GPUs):
# c94e13 is a sample rig/[worker]/hostname, change it to your own rig/[worker]/h
ostname, see below for documentation.
# Your [worker] names are assigned automatically by the OS, do not change them.
They are 6-digit alphanumeric codes.
#
# cor c94e13 950 950 950 950 950
# mem c94e13 1250 1250 1250 1250 1250
# fan c94e13 90 80 85 100 70
# pwr c94e13 10 20 15 15 20
# vlt c94e13 0 1.118 0 0 1.118
# flg c94e13 --cl-local-work 256 --cl-global-work 8192 --farm-recheck 200
# mxt c94e13 70
# reb c94e13 1
# loc c94e13 d3
# sel c94e13 1 2 4
#
#
# DOCUMENTATION
#
# For instructions on setting configs, see http://ethosdistro.com/kb/#single-rig
#
# If using "pool" parameter, write WORKER (a placeholder variable) in place of r
ig name (i.e. NOT rig1, myrig, home, warehouse2, etc).
#
# pool:
use this if you have a network proxy or to define a getw
ork pool (example: http://pool.com:port/WORKER )
# stratumproxy:
enabled or disabled, if enabled, you will bypass "pool"
and connect to stratum proxy located on this rig
# proxy wallet:
the ethereum address to which this rig's proxy will mine
(only used if stratumproxy is enabled)
# proxypool1:
this rig's stratum proxy's first pool (only used if stra
tumproxy is enabled)
# proxypool2:
this rig's stratum proxy's failover pool (only used if s
tratumproxy is enabled)
# flags:
set desired ethminer flags here
# maxgputemp:
the temperature in C that your GPUs will trigger ethmine
r to turn off
# globalcore:
set the global core clock of all GPUs
# globalmem:
set the global mem clock of all GPUs
# globalfan:
set the fan speed percent (0-100)
# globalpowertune:
set the power tune setting of all GPUs (notes from dev:
20 is default/max on everything except 290/390; r9 290 should use 50)
# autoreboot:
allow rigs to autoreboot if they enter a non-mining stat
e (very dangerous, possible cascading/perpetual reboots may occur)
# custompanel:
set ethosdistro.com custom panel, max 12 digits, first 6
digits is your public panel key visible to everyone, last 6 is your private key
#
#
# Your [worker] names are assigned automatically by the OS, do not change them.
They are 6-digit alphanumeric codes.
#
# cor [worker]: set the core clock of individual GPUs on a single rig
# mem [worker]: set the core clock of individual GPUs on a single rig
# fan [worker]: set the fan speed of individual GPUs on a single rig
# pwr [worker]: set the powertune of individual GPUs on a single rig

# vlt [worker]: set the voltage (EXPERIMENTAL, MAY NOT WORK!) of individual GPUs
on a single rig
# flg [worker]: set the ethminer flags of a single rig (applies to all GPUs on t
he rig)
# mxt [worker]: set the maxgputemp of a single rig (applies to all GPUs on the r
ig)
# reb [worker]: increment this value (example: 4 becomes 5) and the single rig w
ill automatically reboot within 10 minutes
# loc [worker]: set an maximum 8-letter code for rack/location information on a
single rig (each rig MUST have a different code, or it will not report to panel)
# sel [worker]: set the GPUs that should mine, default is no sel flag set, all G
PUs may mine)
#
# AUTOMATIC REBOOT NOTES
#
# You are able to reboot remotely. Start with "1" (no quotes) to reboot a rig:
#
# reb a23def 1
#
# Then, if you want to reboot again, increment it to 2, then 3, then 4, etc etc
(never skip any numbers).

Mines

Uploaded by

Copyright:

Available Formats

Mines

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mines

Uploaded by

Copyright:

Available Formats

What are some of the configuration settings mentioned?

How can individual GPU settings be configured on a rig?

maxgputemp 90

# pwr [worker]: set the powertune of individual GPUs on a single rig

You might also like