Manual Canon

MP540 series On-screen Manual
Page 1 of 758 pages
How to Use This Manual
Printing This Manual
MC-2822-V1.00
Basic Guide
Advanced Guide
Describes the summary of

this product.
Describes the detailed

function of this product.
Troubleshooting
MP540 series Basic Guide
Page 2 of 758 pages

MP-2233-V1.00
Advanced Guide
Contents
Overview of the Machine
Other Usages
Main Components
Printing the Notebook or Graph Paper
How to Navigate Menus on the LCD
Printing Photos Directly from Your Mobile Phone

or Digital Camera
Printing from a Memory Card
Machine Settings
Solution Menu and My Printer
Printing Photos Saved on the Memory Card
Using Various Functions

Inserting the Memory Card
Loading Paper / Originals

Loading Paper
Copying
Making Copies
Using Various Copy Functions
Loading Originals to Copy or Scan
Routine Maintenance
Replacing an Ink Tank
Printing Photos from Printed Photos
When Printing Becomes Faint or Colors Are

Incorrect
Reprinting Printed Photos
Cleaning the Paper Feed Roller
Cleaning the Pad in the Cassette
Scanning
Appendix
Saving Scanned Data
Safety Precautions
Legal Limitations on Use of Your Product and

Use of Images
Printing from Your Computer

Printing Photos (Easy-PhotoPrint EX)
Printing Documents (Windows)

Printing Documents (Macintosh)
Tips on How to Use Your Machine
Page 3 of 758 pages

Advanced Guide
Troubleshooting
Contents > Overview of the Machine

This section shows the component names of the machine and describes the basic operations you need
to know before using it.
Main Components
Front View
Rear View
Inside View
Operation Panel

Selecting Menus on the HOME Screen
Selecting Setting Items
Other Operations
Page top
Main Components
Page 4 of 758 pages

Advanced Guide
Troubleshooting
Contents > Overview of the Machine > Main Components
Main Components
Front View
(1) Document Cover

Open to load an original on the Platen Glass.
(2) Paper Support

Raise and tip back to load paper in the Rear Tray.
(3) Paper Guides

Slide to align with both sides of the paper stack.
(4) Rear Tray

Load various sizes or types of paper which you can use on the machine. Two or more sheets of the same
size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
See Loading Paper.
(5) LCD (Liquid Crystal Display)

Displays messages, menu selections, and the operation status. You can also preview photos on the LCD
before printing.
Note
The LCD will turn off if the machine is not operated for about 5 minutes. To restore the
display, press any button except the ON button or perform the print operation.
(6) Operation Panel

Use to change the settings of the machine or to operate it.
See Operation Panel.
(7) Card Slot Cover

Open to insert a memory card.
See Inserting the Memory Card.
(8) Direct Print Port

Connect a PictBridge compliant device such as a digital camera or the optional Bluetooth Unit BU-30* when
Main Components
Page 5 of 758 pages
printing directly.
See Printing Photos Directly from Your Mobile Phone or Digital Camera.
You can also insert a USB flash drive to this port to save scanned data on it.
See Saving Scanned Data .
* The Bluetooth Unit is not available in some countries or regions depending on the local laws and
regulations. For details, contact your local Canon service representative.
Warning
Do not connect any equipment other than PictBridge compliant devices, the optional
Bluetooth Unit BU-30, and USB flash drives to the Direct Print Port of the machine. This
may cause fire, electric shock, or damage to the machine.
Caution
Do not touch the metal casing.
(9) Paper Output Tray

Opens automatically when printing or copying starts and printed papers are ejected.
(10) Output Tray Extension

Open to support the printouts. Open it when printing or copying.
(11) Platen Glass

Load an original to copy or scan.
(12) Cassette
Load A4, B5, A5, or Letter-sized plain paper and insert it into the machine. Two or more sheets of the same
size of paper can be loaded at the same time, and fed automatically one sheet at a time.
See Loading Paper.
Rear View
(13) USB Port

Plug in the USB cable to connect the machine with a computer.
Caution
Do not touch the metal casing.
Important
Main Components
Do not plug in or unplug the USB cable while the machine is printing from or scanning
originals to the computer.
(14) Rear Cover

Detach to remove jammed paper.
(15) Power Cord Connector

Plug in the supplied power cord.
Inside View
(16) Ink lamp

Lights or flashes red to indicate the ink tank status.
See Checking the Ink Status .
(17) Print Head Lock Lever

Locks the Print Head into place.
Important
Do not raise this lever after installing the Print Head.
(18) Print Head Holder

Install the Print Head.
(19) Scanning Unit (Cover)

Scans originals. Open it to replace ink tanks, to check ink lamps, or to remove jammed paper inside the
machine. When opening the Scanning Unit (Cover), lift it with the Document Cover closed.
(20) Card Slot

Insert a memory card.
(21) Access lamp

Lights or flashes to indicate the memory card status.
Note
For details on installing the Print Head and ink tanks, refer to the printed manual: Getting
Started .
Operation Panel
Page 6 of 758 pages
Main Components
Page 7 of 758 pages
(1) ON button
Turns the power on or off. Before turning on the power, make sure that the Document Cover is closed.
Important
Disconnecting the power plug
When disconnecting the power plug after turning off the power, be sure to confirm that
the Power lamp is not lit. If the power plug is disconnected from the wall outlet while the
Power lamp is lit or flashing, the machine may become unable to print properly since the
Print Head is not protected.
(2) Buttons to use when navigating menus on the LCD

See How to Navigate Menus on the LCD .
(3) OK button
Selects a menu or setting item. See How to Navigate Menus on the LCD .
Resolves an error when printing is in progress or resumes the machine's normal operation after removing
jammed paper.
(4) [+] [-] buttons

Specifies the number of copies to copy or print.
(5) Stop button

Cancels operation when a print job is in progress.
(6) Alarm lamp

Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
(7) Power lamp

Lights green after flashing when the power is turned on.
(8) Color button

Starts color printing, copying, or scanning.
(9) Black button

Starts black & white copying, scanning, etc.
Page top
Page 8 of 758 pages

Advanced Guide
Troubleshooting
Contents > Overview of the Machine > How to Navigate Menus on the LCD

You can use the machine to make copies or various kinds of printings without a computer. You can
(Left),
(Up),
(Right),
(Down) button, or OK
operate the machine, using the Easy-Scroll Wheel,
button on the Operation Panel to navigate menus or select setting items on the LCD.
This section describes the basic operation to navigate menus on the HOME screen and to select setting
items necessary for printing.
Selecting Menus on the HOME Screen

The HOME screen appears when the power is turned on or when the HOME button is pressed.
To start printing photos on a memory card, copying, or scanning, select menus on the HOME screen.
1.
Press the HOME button (A).

The HOME screen appears.
2.
Turn the Easy-Scroll Wheel (B) to select the menu to use, and press the OK button
(C).
You can also use the
(Left) or
(Right) button (D) to select the menu.
Page 9 of 758 pages
The selected menu screen appears.

The following menus are available on the HOME screen.
You can change copy scale or copy in various

layouts.
See Copying.
Copy
Memory card
Easy photo reprint
Settings
You can scan printed photos and print them

easily. You can also specify the number of
copies for each photo.
See Printing Photos from Printed Photos.
You can maintain the condition of the machine,
change settings of the machine, or print the
notebook or graph paper.
See When Printing Becomes Faint or Colors Are
Incorrect, Cleaning the Paper Feed Roller,
Machine Settings , or Printing the Notebook or
Graph Paper .
Photo index sheet
Scan
You can print photos saved on a memory card of

your digital camera.
See Printing from a Memory Card .
You can easily print photos on a memory card

using the Photo Index Sheet.
See Using Photo Index Sheet to print .
You can save scanned data on your computer, or

on a memory card or USB flash drive inserted into
the machine, using the Operation Panel.
See Scanning .
Note
If you insert a memory card while the HOME screen or any screen of the Copy, Easy photo reprint,
and Settings menus appears, the screen changes to the photo selection screen in Select and print
of the Memory card menu.
To select a function other than Select and print, press the HOME button and display the HOME
screen.
Selecting Setting Items

The displayed screen varies depending on the menu you selected, but the operation is the same.
This section describes how to change the print quality, using the example of the print confirmation
screen in Select and print of the Memory card menu.
1.
Use the Easy-Scroll Wheel (B) or the (Up) or

print quality, and press the OK button (C).
2.
Use the Easy-Scroll Wheel or the

quality, and press the OK button.
(Up) or
(Down) button (D) to select the
(Down) button to select another print
Page 10 of 758 pages
The screen returns to the print confirmation screen in Select and print.
Other Operations
Selecting Items at the Bottom of the LCD

You can use the two Function buttons (E) to select items displayed at the bottom of the LCD.
You can press the right Function button to select the item on the right, and the left Function button to
select the item on the left. The item displayed at the bottom of the LCD varies depending on the screen.
Returning to the Previous Screen

You can press the Back button (F) to return to the previous screen.
Performing the Frequently-Used Functions with Easy

Operation
You can use the NAVI button (G) to perform the frequently-used functions easily, just by following the
instructions displayed on the screen. You can also display the information on the functions or
instructions on how to load paper.
1.
Press the NAVI button (G).

The NAVI screen appears.
Note
When you press the Back button while the NAVI screen appears, the screen returns to the
HOME screen.
2.

and press the OK button.
(Up) or
(Down) button to select the item,
Follow the instructions on the LCD.
Canceling Copying or Printing

You can press the Stop button (H) to cancel a copy or print job in progress.
Page top

Advanced Guide
Troubleshooting
Contents > Printing from a Memory Card

You can preview each shot of your photos taken with the digital camera on the LCD of the machine, and
print the photos.
There are also the useful functions to print thumbnails of photos saved on the memory card onto A4 or
Letter-sized paper and select ones to print, and to print favorite photos in a specified layout.

Setting Items

Printing Photos in Various Layouts
Changing the Display
Cropping a Part of Photo / Searching Photos by a Specified Date
Correcting Images

Before Inserting the Memory Card
Removing the Memory Card
Page top

Advanced Guide
Troubleshooting
Contents > Printing from a Memory Card > Printing Photos Saved on the Memory Card

Preview each shot of your photos saved on the memory card on the LCD of the machine, and print the
photos.
This section describes the basic operation, using the settings to print borderless photos on 4" x 6" / 10 x
15 cm paper as an example.
For the operation, see the notes and operation procedure described in the reference page.
You need to prepare:

A memory card on which photos are saved. See Before Inserting the Memory Card .
Paper for printing. See Media Types You Can Use .
1.
Prepare for printing.
(1) Turn on the power.

(2) Load paper.

See Loading Paper.
Here we load 4" x 6" / 10 x 15 cm photo paper in the Rear Tray.
Note
Load A4 or Letter-sized plain paper in the Cassette. Load other sizes or types of paper in
the Rear Tray.
(3) Open the Paper Output Tray gently, and open the Output Tray Extension.
2.
Insert a memory card.
(1) Select Memory card
on the HOME screen, and press the OK button.
See Selecting Menus on the HOME Screen .
(2) Make sure that Select and print
is selected, and press the OK button.
(3) Insert a memory card WITH THE LABELED SIDE FACING TO THE LEFT into
the Card Slot.
For the types of memory cards you can use and the locations to insert them, see Inserting the Memory Card
.
The photo selection screen appears.
Note
You can also display the photo selection screen in Select and print by inserting a memory
card while the HOME screen or any screen of the Copy, Easy photo reprint, and Settings
menus appears.
You can also select useful printing functions other than Select and print.
See Using Various Functions .
When Writable from PC is selected in Read/write attribute of Advanced settings under
Device settings in the Settings menu, you cannot print image data on the memory card
using the Operation Panel on the machine. Set Read/write attribute to Not writable from PC.
For details, refer to the on-screen manual: Advanced Guide.
3.
Select photos to print.
(1) Use the Easy-Scroll Wheel or the

photo you want to print.
(Left) or
(Right) button to display the
Note
may appear on the LCD while reading photos. If you use the Easy-Scroll Wheel or the
(Right) button to display the photo while
(Left) or
desired photo may not be selected.
appears on the LCD, the
(2) Press the [ +] or [-] button to specify the number of copies.
(3) Repeat the procedures of (1) and (2) to specify the number of copies for each
photo.
Note
Other options
To change the display of photos, see Changing the Display .
To crop a part of photo (Trimming), see Cropping a Part of Photo / Searching Photos by a
Specified Date.
To search photos by a specified date (Search), see Cropping a Part of Photo / Searching
Photos by a Specified Date .
(4) Press the OK button.

The print confirmation screen appears.
4.
Start printing.
(1) Confirm the page size, media type, print quality, etc.
Here we confirm that 4"x6" (10x15cm) is selected for Page size and the type of loaded photo paper for
Media type.
To change the settings, use the Easy-Scroll Wheel or the
change, and press the OK button.
(Up) or
(Down) button to select the item to
See Selecting Setting Items and Setting Items.
Note
When Plain paper is selected for Media type and A4 or 8.5"x11" (LTR) for Page size,
Cassette appears for Paper source.
When other sizes or types of paper are selected, Rear tray appears.
Confirm that the selected paper is loaded in the correct paper source.
(2) Confirm the number of sheets to be used for printing the selected photos.
(3) Press the right Function button (B) to select Check photo, and confirm the
selected photos and number of copies for each photo.
Press the OK button to return to the print confirmation screen.
(4) Press the Color button.

The machine starts printing photos.
Note
You can correct photos automatically or manually, if you press the left Function button (A) to
select Advanced. By default, the machine is set to correct photos automatically.
Press the Stop button to cancel printing.
Printing does not start if you press the Black button.
You can display the Memory card menu and select other useful printing functions, if you press
the Back button after printing is completed.
If you press the HOME button or remove the memory card, the HOME screen appears.
To remove the memory card, see Removing the Memory Card.
Setting Items
The print confirmation screen in Select and print is shown as below:
(1) Page size

Select the page size of the paper to print: 4"x6" (10x15cm), A4, etc.
(2) Media type

Select the media type of the paper to print: Plus Glossy II, Plain paper, etc.
Note
If you do not select the page size and media type correctly, the machine may feed paper
from the wrong paper source or may not print with the proper print quality.
See Paper Source to Load Paper .
(3) Print quality

Adjust the print quality: High(quality-priority) or Standard.
(4) Borderless print

Select bordered or borderless print: Bordered or Borderless.
Note
When Plain paper is selected for Media type, you cannot select Borderless.
(5) Paper source

The paper source for the selected page size and media type appears on the screen.
When A4 or Letter-sized plain paper is selected, Cassette appears.
Confirm that the selected paper is loaded in the paper source displayed on the screen.
For details on the paper source setting, refer to the on-screen manual: Advanced Guide.
Note
The settings of the page size, media type, print quality, borderless print, image correction, etc.
are retained, and these settings will appear next time when the Memory card menu is selected
even if the power is turned off and on.
Combination of some items cannot be specified depending on the function.
Using Photo Index Sheet to print

Thumbnails of photos on the memory card are printed on A4 or Letter-sized paper (this printed sheet is
called Photo Index Sheet). You can select photos, number of copies, page size, etc. on this sheet, and
print them.
on the HOME screen, and Index sheet print
Select Photo index sheet
operation, refer to the on-screen manual: Advanced Guide .
. For details on the
Page top

Advanced Guide
Troubleshooting
Contents > Printing from a Memory Card > Using Various Functions

This section describes a few of the useful functions of the Memory card menu.
For details, refer to the on-screen manual: Advanced Guide .

You can select various layouts on the Memory card menu screen. You can also select DPOF print.
Layout print
Sticker print
Photo index print
Print all photos
ID photo size print
Calendar print
Captured info print

You can change the display of photos by pressing the left Function button when Change display appears
at the bottom of the screen. You can also select Slide show.
Thumbnail display
Full-screen display
Enlarged display
Cropping a Part of Photo / Searching Photos by a Specified Date

You can specify the function by pressing the right Function button when Edit appears at the bottom of the
screen.
Wide (16:9)
Standard (4:3)
Trimming
Search
Correcting Images
You can correct images by pressing the left Function button when Advanced appears at the bottom of the
screen. You can correct images automatically or manually, such as adjusting brightness, contrast, and
color hue, or add effects to images.
Auto photo fix ON (Default)
Page top

Advanced Guide
Troubleshooting
Contents > Printing from a Memory Card > Inserting the Memory Card

Before Inserting the Memory Card
The following types of memory cards and image data are compatible with the machine.
Important
If you took and saved photos on a type of memory card that is not guaranteed operation to be used
on your digital camera, the image data may be unreadable on the machine or damaged. For
information on memory cards that your digital camera guarantees operation, refer to the instruction
manual supplied with your digital camera.
Format the memory card with a digital camera compliant with the Design rule for Camera File system
(Exif 2.2/2.21 compliant), TIFF (Exif 2.2/2.21 compliant). The memory card may not be usable with
the machine if it is formatted on a computer.
Memory Cards that Do Not Require a Card Adapter

SD Secure Digital memory card
SDHC memory card
MultiMediaCard (ver.4.1)
MultiMediaCard Plus (ver.4.1)
Compact Flash (CF) Card
Supports Type I/II (3.3 V)
Microdrive
Memory Stick
Memory Stick PRO
Memory Stick Duo

Memory Stick PRO Duo
Memory Cards that Require a Card Adapter

Important
Be sure to attach the special card adapters to the following memory cards before inserting to the
Card Slot.
If one of the following memory cards is inserted without the card adapter, you may not be able to
remove the memory card. In this case, refer to " Troubleshooting " in the on-screen manual:
Advanced Guide.
miniSD Card *1
miniSDHC Card *1
microSD Card *1
microSDHC Card *1
xD-Picture Card *2
xD-Picture Card Type M *2

xD-Picture Card Type H *2
RS-MMC (ver.4.1) *3
Memory Stick Micro *4
*1 Use the special "SD Card Adapter".

*2 Requires purchase of a separate compact flash card adapter for xD-Picture Card.
*3 Use the special card adapter.
*4 Use the special Duo size adapter.
Printable Image Data

This machine accepts images taken with a camera compliant with the Design rule for Camera File
system (Exif 2.2/2.21 compliant), TIFF (Exif 2.2/2.21 compliant). Other image or movie types such as
RAW images cannot be printed.

Caution
When a memory card is inserted into the Card Slot, the Access lamp is lit. When the Access lamp
is flashing, the machine is accessing the memory card. In this case, do not touch the area around
the Card Slot.
Note
When Writable from PC is selected in Read/write attribute of Advanced settings under Device
settings in the Settings menu, you cannot print image data on the memory card or save scanned
data on the memory card using the Operation Panel on the machine. After using the Card Slot as the
memory card drive of a computer, remove the memory card and be sure to set Read/write attribute
to Not writable from PC. For details, refer to the on-screen manual: Advanced Guide.
When you use a computer to edit or enhance photos saved on a memory card, be sure to print them
from the computer. If you use the Operation Panel, the photos may not be printed properly.
1.
Prepare your memory card.

Attach a special card adapter if your memory card requires one.
See Memory Cards that Require a Card Adapter .
2.
Turn on the power, and open the Card Slot Cover.
3.
Insert only one memory card into the Card Slot.

The location to insert a memory card varies depending on each type of memory card. Insert your memory card
straightforward WITH THE LABELED SIDE FACING TO THE LEFT into the Card Slot, according to the insert
location in the figure below.
When the memory card is inserted properly, the Access lamp (A) will light up.
Be sure to attach the card adapter to the memory card with the mark
the Card Slot.
(asterisk) below, and then insert it into
For Memory Stick Duo, Memory Stick PRO Duo, or Memory Stick Micro
For SD Secure Digital memory card, SDHC memory card, miniSD Card , miniSDHC Card , microSD
Card , microSDHC Card , Memory Stick, Memory Stick PRO, MultiMediaCard (ver.4.1),
MultiMediaCard Plus (ver.4.1), or RS-MMC (ver.4.1) :
For Compact Flash (CF) Card, Microdrive, xD-Picture Card

Card Type H :
, xD-Picture Card Type M
, or xD-Picture
Caution
Part of the memory card will stick out of the Card Slot, but do not force it into the slot any
further. This can damage the machine or the memory card.
Make sure that the memory card is correctly oriented before inserting it into the Card Slot. If
you force the memory card into the Card Slot in the wrong orientation, the memory card or the
machine can be damaged.
Important
Do not insert more than one memory card at a time.
4.
Close the Card Slot Cover.
Removing the Memory Card

Important
If you used the Card Slot as the memory card drive of a computer, you must perform the "safe
removal" operation on your computer before physically removing the memory card from the
machine.
- In Windows, right-click the removable disk icon and click Eject. If Eject does not appear on the
screen, make sure that the Access lamp is lit, and then remove the memory card.
- In Macintosh, drag
1.
(Mount drive) into the Trash.
Open the Card Slot Cover.
2.
Make sure that the Access lamp is lit, and remove the memory card.
Hold the part of the memory card that is sticking out and remove it from the machine straightforward.
Caution
Do not remove the memory card while the Access lamp is flashing. The Access lamp flashes
while the machine is reading or writing data from/to the memory card. If you remove the
memory card or turn off the power while the Access lamp is flashing, the data saved on the
memory card can be damaged.
3.
Close the Card Slot Cover.
Page top
Copying

Advanced Guide
Troubleshooting
Contents > Copying
Copying
You can copy in the various methods such as enlarging/reducing or copying two original pages onto a
single sheet of paper.
Making Copies
Setting Items
Page top
Making Copies

Advanced Guide
Troubleshooting
Contents > Copying > Making Copies
Making Copies
This section describes the basic operation, using the settings to copy a document of A4 size on plain
paper as an example.
For the operation, see the notes and operation procedure described in the reference page.

Originals to copy. See Originals You Can Load .
1.
Prepare for copying.

(2) Load paper.

See Loading Paper.
Making Copies
Here we load A4 plain paper in the Cassette.
Note
Load A4, B5, A5, or Letter-sized plain paper in the Cassette. Load other sizes or types of
paper in the Rear Tray.
(4) Make sure that Copy
button.
is selected on the HOME screen, and press the OK
See Selecting Menus on the HOME Screen .
(5) Load an original on the Platen Glass.

Load the original with the side to copy FACING DOWN and align it with the alignment mark as shown below.
See Loading Originals to Copy or Scan .
2.
Start copying.
(1) Confirm the page size, media type, magnification, etc.

Here we confirm that 100% is selected for Magnification, A4 for Page size, and Plain paper for Media type.
(Up) or
See Selecting Setting Items and Setting Items.
Note
When Plain paper is selected for Media type and A4, B5, A5, or 8.5"x11" (LTR) for Page
size, Cassette appears for Paper source.
Confirm that the selected paper is loaded in the correct paper source.
You can check the preview of print result if you press the right Function button (B) to
select Preview.
Making Copies
Refer to the on-screen manual: Advanced Guide.

You can select various copy functions, such as Borderless copy, 2-on-1 copy, and Frame
erase, if you press the left Function button (A) to select Special copy.
See Using Various Copy Functions .

(3) Press the Color button for color copying, or the Black button for black & white
copying.
The machine starts copying.
Remove the original on the Platen Glass after copying is completed.
Important
Do not open the Document Cover or move the loaded original until copying is completed.
Note
Press the Stop button to cancel copying.
Repeat the procedures from (5) in step 1 to copy another original.
You can exit the Copy menu and select another menu if you press the HOME button.
Setting Items
(1) Magnification
Specify the enlargement/reduction manner. You can specify the copy scale by selecting the optional
number or the page size: A4 to 8.5"x11", A4 to B5, etc. If you do not want to enlarge/reduce the page size,
select 100%. For details, refer to the on-screen manual: Advanced Guide.
(2) Intensity
Specify the intensity when you want to make the darkened/lightened copy. You can also set the intensity to
automatically adjust according to the original. For details, refer to the on-screen manual: Advanced Guide.
(3) Page size

Select the page size of the paper to print: A4, 8.5"x11" (LTR), etc.
(4) Media type

Select the media type of the paper to print: Plain paper, Plus Glossy II, etc.
Note
If you do not select the page size and media type correctly, the machine may feed paper
from the wrong paper source or may not print with the proper print quality.
See Paper Source to Load Paper .
(5) Print quality

Adjust the print quality according to the original to copy: High(quality-priority), Standard, etc. The available
print quality settings depend on the paper selected in Media type.
(6) Paper source

The paper source for the selected page size and media type appears on the screen.
When A4, B5, A5, or Letter-sized plain paper is selected, Cassette appears.
Confirm that the selected paper is loaded in the paper source displayed on the screen.
For details on the paper source setting, refer to the on-screen manual: Advanced Guide.
Note
The settings of the page size, media type, print quality, automatic intensity, etc. are retained,
and these settings will appear next time when the Copy menu is selected even if the power is
Making Copies
turned off and on.

Combination of some items cannot be specified depending on the function.
If you select Fast (speed-priority) with the media type set to Plain paper and the quality is not
as good as expected, select Standard or High(quality-priority) and then try copying again.
When you make black & white copies by pressing the Black button, select High(qualitypriority) for the print quality to copy in grayscale. Grayscale renders tones in a range of grays
instead of black or white.
Page top

Advanced Guide
Troubleshooting
Contents > Copying > Using Various Copy Functions

You can make a copy using various functions if you press the left Function button to select Special copy
at the bottom of the Copy screen.
Borderless copy
2-on-1 copy
4-on-1 copy
Image repeat
Frame erase
Trimming
Masking
Page top

Advanced Guide
Troubleshooting
Contents > Printing Photos from Printed Photos

You can reprint printed photos in various layouts.

Correcting Images
Page top

Advanced Guide
Troubleshooting
Contents > Printing Photos from Printed Photos > Reprinting Printed Photos

Reprint printed photos.
This section describes the basic operation, using the settings to print printed photos on 4" x 6" / 10 x 15
cm paper as an example.
Note
You cannot save scanned images with this function. Use the computer to scan images and save
them.

Printed photos.
1.
Prepare for reprinting printed photos.

(2) Load paper.

See Loading Paper.
(4) Select Easy photo reprint
When the guidance screen appears, press the OK button again.
2.
Load photos on the Platen Glass to scan.
(1) Open the Document Cover.

(2) Load the photo with the side to scan FACING DOWN on the Platen Glass.
See Loading Originals to Copy or Scan .
(A) To load four photos on the Platen Glass

(B) To load two photos on the Platen Glass
Note
Place the photo(s) at least 0.4 inches / 10 mm away from and in square with the edges of
the Platen Glass.
When loading two or more photos at the same time, place them at least 0.4 inches / 10 mm
apart from each other. If photos are placed closer, they may be scanned as a single
image.
The Skew Correction function automatically compensates for photos placed at an angle of
up to approximately 10 degrees.
Slanted photos with a long edge of 7.1 inches / 180 mm or more cannot be corrected.
If
appears on the preview screen, check the followings and reset the photos properly
to scan them again.
- The slant is not too large.
- The photos are not placed too close to the edge of the Platen Glass.
Photos smaller than approximately 1 inch / 25 mm square will not be scanned properly.
The types of photos listed below may not be scanned properly.
- Photos that are non-rectangular or irregular shaped (such as cut out photos)
- Photos that are entirely white
- Photos that have white surrounds
The borders of bordered photos may not be scanned properly. Crop photos if necessary.
Refer to the on-screen manual: Advanced Guide.
(3) Close the Document Cover gently, and press the OK button.
The machine starts scanning.
Important
The photos are rescanned before printing starts. Do not open the Document Cover or move the
loaded photos until printing is completed.
3.
Specify the number of copies.
(1) Make sure that Select and print
is selected, and press the OK button.
Note
You can also select useful printing functions other than Select and print.

photo to print.
(Left) or
(Right) button to display a
Note
If
appears next to the photo on the screen, it may not have been scanned properly.
Press the Back button, and press the left Function button to select Rescan. Confirm the
message, and repeat the procedures from step 2 to scan the photo again.
Other options
To change the display of photos, see Changing the Display .
(You can also select Full-screen display and Enlarged display besides Normal screen
display.)
To crop a part of photo (Trimming), see Cropping a Part of Photo / Searching Photos by a
Specified Date.
(4) Repeat the procedures of (2) and (3) to specify the number of copies for each
photo.
(5) Press the OK button.
4.
Start printing.
(1) Confirm the page size, media type, print quality, etc.
Here we confirm that 4"x6" (10x15cm) is selected for Page size and the type of loaded photo paper for
Media type.
Note
To change the settings, select each item, and press the OK button.
See Setting Items.
The settings of the page size, media type, print quality, borderless print, image correction,
etc. are retained, and these settings will appear next time when the Easy photo reprint
menu is selected even if the power is turned off and on.
(2) Confirm the number of sheets to be used for printing the selected photos.
Note
You can correct photos automatically or manually, if you press the left Function button to
select Advanced.
(3) Press the Color button to print in color, or the Black button to print in black &
white.
The machine starts printing.
Remove the photos on the Platen Glass after printing is completed.
Note
You can exit the Easy photo reprint menu and select another menu, if you press the HOME
button after printing is completed. Confirm the message and select Yes to delete the scanned
image data.
Page top

Advanced Guide
Troubleshooting
Contents > Printing Photos from Printed Photos > Using Various Functions

This section describes a few of the useful functions in the Easy photo reprint menu.

You can select a layout and print photos other than Select and print.
Sticker print
Print all photos
Correcting Images
You can correct images by pressing the left Function button when Advanced appears at the bottom of the
screen. You can correct images automatically or manually, such as adjusting brightness, contrast, and
color hue, or apply the fade restoration.
Brightness
Contrast
Page top
Scanning

Advanced Guide
Troubleshooting
Contents > Scanning
Scanning
You can send scanned data to your computer, edit or process them with the supplied software
application, then save them. You can also save scanned data on a USB flash drive or memory card
inserted into the machine.
Saving Scanned Data

Saving the Scanned Data on the USB Flash Drive
Inserting the USB Flash Drive
Removing the USB Flash Drive
Page top
Saving Scanned Data

Advanced Guide
Troubleshooting
Contents > Scanning > Saving Scanned Data
Saving Scanned Data

You can save the scanned documents or photos on a USB flash drive, a memory card, or a computer
using the Operation Panel on the machine. You can also scan originals using your computer.
This section describes the operation to scan documents and save them on the USB flash drive in PDF
data.
For other operations, refer to the on-screen manual: Advanced Guide . You can find the detailed
procedures to correct scanned images or print them with various settings.
Important
We recommend that you make a backup of the data on the memory card or USB flash drive
regularly and save it on other storage media, in case of accidental loss.
Please note that Canon shall not be liable for any damage or loss of the data for any reason
whatsoever, even within the warranty period of the machine.
Saving the Scanned Data on the USB Flash Drive
1.
Prepare for using a USB flash drive.

(2) Insert a USB flash drive into the Direct Print Port.
See Inserting the USB Flash Drive .
2.
Select the scan operation.
(1) Select Scan
(Left) or
flash drive
, and press the OK button.
(Right) button to select USB
The operation selection screen appears.

USB flash
(Left) or
(Right) button to select Save to
The scan settings screen appears.
3.
Specify the scan settings.
(1) Confirm the document type, scan size, scan resolution, etc.
Here we confirm that Document is selected for Document type, A4 for Scan size, and PDF for Data format.
(Up) or
Note
For details on the settings and Advanced of the Function button, refer to the on-screen
manual: Advanced Guide.
When PDF is selected, up to 100 pages can be saved in one file.
Saving Scanned Data
(2) Select Next, and press the OK button.
4.
Start scanning.
(1) Confirm the message, press the OK button, then load an original on the Platen
Glass.
Loading Originals to Copy or Scan .
See
Note
The sizes of originals that can be scanned are A4, 8.5"x11" (LTR), 4"x6" (10x15cm), and
5"x7" (13x18cm).
(2) Press the Color button for color scanning, or the Black button for black & white
scanning.
The machine starts scanning.
(3) Check the preview of the scanned data on the screen.
Note
The preview screen will not appear if Preview OFF is selected in Advanced in the
procedure of (1) in step 3.
To rescan the original, press the left Function button to select Rescan. Confirm the
message and scan the original again.
To rotate the scanned data 90 degrees clockwise, press the right Function button to
select Rotate.
(4) Press the OK button to save the scanned data.

The message "End scanning?" appears when scanning is completed.
(5) Select End, and press the OK button.

Remove the original on the Platen Glass after scanning is completed.
Note
To scan the multi-page document into one file, select Continue, and press the OK button.
Then load the next page on the Platen Glass, and repeat the procedures from (2) in this
step.
Repeat the same procedure until you finish scanning all the pages.
Important
Do not remove the USB flash drive or turn off the power while the machine is operating.
Do not open the Document Cover or move the loaded original until scanning is completed.
The scanned data will be saved in the folder "CANON_SC" on the USB flash drive. You cannot
print the saved data using the Operation Panel on the machine.
Insert the USB flash drive into a computer to view or print the saved data from the computer.
Note
To remove the USB flash drive after scanning is completed, see Removing the USB Flash
Drive .
You can exit the Scan menu and select another menu, if you press the HOME button after
scanning is completed.
Deleting the Scanned Data
Saving Scanned Data
1.
Prepare for using a USB flash drive.

(2) Insert a USB flash drive into the Direct Print Port.
See Inserting the USB Flash Drive .
2.
Delete the scanned data.
(1) Select Scan
(Left) or
flash drive
(Right) button to select USB
The operation selection screen appears.
(Left) or
scanned data
(Right) button to select Delete
The data list screen appears.
(4) Use the Easy-Scroll Wheel or the (Up) or (Down) button to select the image
data you want to delete, and press the OK button.
Note
Select the image data and press the left Function button to view the selected data on the
screen.
Press the right Function button to change the data list between PDF data and JPEG data.
You can only delete the image data that have been scanned and saved using the machine.
(5) When the message "Delete?" appears, select Yes and press the OK button.
(6) When the message "Are you sure you want to delete?" appears, select Yes and
press the OK button.
The selected image data will be deleted from the USB flash drive.
Inserting the USB Flash Drive

Important
Before inserting the USB flash drive
If your USB flash drive cannot be inserted into the Direct Print Port of the machine, you may be
required to use an extension cable for the USB flash drive. Purchase it at electronics retail stores.
For some USB flash drives, proper operation may not be guaranteed on the machine.
You may not be able to use USB flash drives with security function.
1.
Insert the USB flash drive into the Direct Print Port.
Make sure that the USB flash drive is correctly oriented before inserting it straightforward into the Direct Print
Port.
Saving Scanned Data
Removing the USB Flash Drive
1.
Make sure that the machine is not reading or writing data from/to the USB flash
drive.
Check if the reading or writing operation is completed on the LCD.
Important
Do not remove the USB flash drive or turn off the power while the machine is operating.
Note
If you use the USB flash drive with the access lamp, refer to the instruction manual supplied
with the USB flash drive to check if the reading or writing operation is completed on the USB
flash drive.
2.
Remove the USB flash drive.

Hold the USB flash drive and remove it from the machine straightforward.
Page top

Advanced Guide
Troubleshooting
Contents > Printing from Your Computer

This section describes how to print documents or photos with a computer.
You can easily print photos taken with your digital camera by using Easy-PhotoPrint EX supplied with
your machine.

Using Various Functions of Easy-PhotoPrint EX

For Mac OS X v.10.5.x
For Mac OS X v.10.4.x or Mac OS X v.10.3.9
Page top

Advanced Guide
Troubleshooting
Contents > Printing from Your Computer > Printing Photos (Easy-PhotoPrint EX)

Print image data saved on your computer by using Easy-PhotoPrint EX supplied with your machine.
This section describes the procedure, using print setting for borderless photo print on 4" x 6" / 10 x 15 cm
photo paper as a sample.
For details on Easy-PhotoPrint EX, refer to the on-screen manual: Advanced Guide .
Note
The screens used in this section are for printing with Windows. The operations are also the same
for printing with Macintosh.
Install Easy-PhotoPrint EX from the Setup CD-ROM when it has not been installed or has been
uninstalled. To install Easy-PhotoPrint EX, select Easy-PhotoPrint EX in Custom Install.
1.
(1) Make sure that the machine is turned on.

(2) Load paper.

See Loading Paper.
Note
Load A4 or Letter-sized plain paper in the Cassette and other sizes or types of paper
such as photo paper in the Rear Tray.
2.
Start Easy-PhotoPrint EX, and select Photo Print.
(1) Start Easy-PhotoPrint EX.

Double-click
(Easy-PhotoPrint EX) on the desktop.
Click Here: Easy-PhotoPrint EX
Select the Go menu, Applications, Canon Utilities, Easy-PhotoPrint EX, then double-click Easy-PhotoPrint EX.
Note
To start Easy-PhotoPrint EX from Solution Menu, double-click
(Solution Menu) on the
desktop and click

(Print photos or albums, etc.).
See To Start Solution Menu.
To start Easy-PhotoPrint EX from the Start menu, select All Programs (Programs in
Windows 2000), Canon Utilities, Easy-PhotoPrint EX, then Easy-PhotoPrint EX.
To start Easy-PhotoPrint EX from Solution Menu, click
(Solution Menu) in the Dock and
click
(Print photos or albums, etc.).
See To Start Solution Menu.
(2) Click Photo Print.

Note
You can select Album, Calendar, Stickers, etc., besides Photo Print.
See Using Various Functions of Easy-PhotoPrint EX .
3.
Select a photo to print.
(1) Select the folder in which images are saved.

(2) Click the image to print.
The number of copies appears as "1", and the image you selected appears in the selected image area (A).
You can select two or more images at the same time.
Note
(Up arrow) to change the number of copies.
To print two or more copies, click
To cancel the selection, click the image to cancel in the selected image area and click
(Delete Imported Image). You can also use
copies to zero.
(Down arrow) to change the number of

You can also correct or enhance the selected image.
See Using Various Functions of Easy-PhotoPrint EX .
(3) Click Select Paper.
4.
Select the loaded paper.
(1) Make sure that your machine's name is selected in Printer.

(2) Make sure that Automatically Select is selected in Paper Source.
Note
For details on other paper feeding, refer to the on-screen manual: Advanced Guide.
(3) Select the size and type of the paper to print in Paper Size and Media Type.
Here we select 4"x6" 10x15cm in Paper Size and the type of loaded photo paper in Media Type.
Note
If you select A4 or Letter-sized plain paper when Automatically Select is selected in Paper
Source, the machine feeds the paper from the Cassette. If you select other sizes or types
of paper such as photo paper, the machine feeds the paper from the Rear Tray.
If you select the wrong page size or media type, the machine may feed paper from the
wrong paper source or may not print with the proper print quality.
(4) Click Layout/Print.
5.
Select a layout and start printing.
(1) Select the layout of the photo.

Here we select Borderless [full].
The preview appears in the selected layout for confirmation of the required print result.
Note
You can change the direction of photo or crop a part of photo (trimming) to print.
For details on the operation, refer to the on-screen manual: Advanced Guide.
(2) Click Print.
Note
To cancel a print job in progress, press the Stop button on the machine or click Cancel
Printing on the printer status monitor. After canceling the print job, blank sheets of paper
may be ejected.
To display the printer status monitor, click Canon XXX Printer (where " XXX" is your
machine's name) on the taskbar.
Click the printer icon in the Dock to display the list of print jobs in progress.
To cancel a print job in progress, select the desired job in the Name list and click Delete.
After canceling the print job, blank sheets of paper may be ejected.
Page top

Advanced Guide
Troubleshooting
Contents > Printing from Your Computer > Printing Photos (Easy-PhotoPrint EX) > Using Various Functions of EasyPhotoPrint EX

This section describes a few of the useful functions of Easy-PhotoPrint EX.
For details on the operation, refer to the on-screen manual: Advanced Guide .
Creating Your Own Prints

You can create an album or calendar using your photos.
Album
Calendar
Stickers
Layout Print
Correcting Images
You can use Red-Eye Correction, Face Sharpener, Digital Face Smoothing, Brightness, Contrast, etc. to
adjust, correct, or enhance images automatically or manually.
Brightness
Page top

Advanced Guide
Troubleshooting
Contents > Printing from Your Computer > Printing Documents (Windows)

Note
Operations may vary depending on your software application. For details on the operation, refer to
the instruction manual of your application.
The screens used in this section are for printing with Windows Vista operating system Ultimate
Edition (hereafter referred to as "Windows Vista").
1.
Make sure that the machine is turned on.

2.
Load paper.
See Loading Paper.
Note
Load A4, B5, A5, or Letter-sized plain paper in the Cassette and other sizes or types of paper
3.
Open the Paper Output Tray gently, and open the Output Tray Extension.
4.
Create (or open) a document to print using an appropriate software application.
5.
Open the printer properties dialog box.
(1) Select Print on the File menu or the command bar in your software application.
The Print dialog box appears.
(2) Make sure that your machine's name is selected.

Note
If another printer's name is selected, click and select your machine's name.
(3) Click Preferences (or Properties).
6.
Specify the required print settings.
(1) Select the media type of the paper to print in Media Type.
Note
If you select A4, B5, A5, or Letter-sized plain paper when Automatically Select is selected
in Paper Source, the machine feeds the paper from the Cassette. If you select other sizes
or types of paper such as photo paper, the machine feeds the paper from the Rear Tray.

Note
(3) Specify the print quality, etc. in Print Quality and Color/Intensity as required.
Note
For details on the print settings, refer to the on-screen manual: Advanced Guide.
(4) Click OK.

Note
To confirm the page size, click the Page Setup tab. If the setting does not match the
document's page size already set in the software application, you need to reset the page size,
or otherwise use Scaled Printing or Fit-to-Page Printing.
For details on the printer driver functions, click Help or Instructions to view the online help or
the on-screen manual: Advanced Guide. The Instructions button appears on the Main and
Maintenance sheets if the on-screen manual is installed on your computer.
To display the preview to confirm the print result, select the Preview before printing check box
on the Main sheet. Some software applications may not have a preview function.
7.
Start printing.
Click Print (or OK) to start printing.
Note
To cancel a print job in progress, press the Stop button on the machine or click Cancel Printing
on the printer status monitor. After canceling the print job, blank sheets of paper may be
ejected.
To display the printer status monitor, click Canon XXX Printer (where " XXX" is your machine's
name) on the taskbar.
If printed ruled lines are misaligned or print results are unsatisfactory, adjust the print head
position.
See Aligning the Print Head.
Page top

Advanced Guide
Troubleshooting
Contents > Printing from Your Computer > Printing Documents (Macintosh)

Note
Operations may vary depending on your software application. For details on the operation, refer to
the instruction manual of your application.
For Mac OS X v.10.5.x
1.

2.
Load paper.
See Loading Paper.
Note
3.
4.
5.
Open the Print dialog box.

Select Print on the File menu in your software application.
Note
If the dialog box below appears, click
6.
(Down arrow).

(2) Select the page size of the paper to print in Paper Size.
(3) Select Quality & Media in the pop-up menu.
Note

Note
(6) Select the print quality in Print Quality.

Note
For details on the print quality, refer to the on-screen manual: Advanced Guide.
Note
(Question) on the Quality & Media, Color
For details on the printer driver functions, click
Options, Borderless Printing, or Margin screen to view the on-screen manual: Advanced
Guide. If the on-screen manual is not installed, it does not appear even if
(Question) is
clicked.
The preview appears on the left of the dialog box to confirm the print result. Some software
applications may not have a preview function.
7.
Start printing.

Click Print to start printing.
Note
To cancel a print job in progress, select the desired job in the Name list and click Delete. To
temporarily stop a job in progress, click Hold. To temporarily stop all the jobs in the list, click
Pause Printer. After canceling the print job, blank sheets of paper may be ejected.
position.
For Mac OS X v.10.4.x or Mac OS X v.10.3.9

Note
The screens used in this section are for printing with Mac OS X v.10.4.x.
1.

2.
Load paper.
See Loading Paper.
Note
3.
4.
5.
Specify the page size.
(1) Select Page Setup on the File menu in your software application.
The Page Setup dialog box appears.
(2) Make sure that your machine's name is selected in Format for.
(3) Select the page size of the paper to print in Paper Size.
(4) Click OK.
6.
(1) Select Print on the File menu in your software application.


(3) Select Quality & Media in the pop-up menu.
Note

Note
(6) Select the print quality in Print Quality.

Note
For details on the print quality, refer to the on-screen manual: Advanced Guide.
Note
(Question) on the Quality & Media, Color
For details on the printer driver functions, click
Options, Special Effects, Borderless Printing, or Margin screen to view the on-screen manual:
Advanced Guide. If the on-screen manual is not installed, it does not appear even if
(Question) is clicked.
To display the preview to confirm the print result, click Preview. Some software applications
may not have a preview function.
7.
Start printing.
Click Print to start printing.
Note
To cancel a print job in progress, select the desired job in the Name list and click Delete. To
temporarily stop a job in progress, click Hold. To temporarily stop all the jobs in the list, click
Stop Jobs. After canceling the print job, blank sheets of paper may be ejected.
position.
Page top
Other Usages

Advanced Guide
Troubleshooting
Contents > Other Usages
Other Usages
This section describes the operation to print the notebook or graph paper, the setting items of the
machine, and the function to print directly from a digital camera or mobile phone.
This section also introduces other useful functions; Solution Menu and My Printer.

Printing the Various Template Forms
Printing Photos Directly from Your Mobile Phone or Digital Camera

Printing Photos from a PictBridge Compliant Device
Printing Photos from a Wireless Communication Device
Machine Settings
Page top

Advanced Guide
Troubleshooting
Contents > Other Usages > Printing the Notebook or Graph Paper

This section describes the operation to select and print the template forms.

A4 or Letter-sized plain paper. See Media Types You Can Use .
1.

(2) Make sure that the A4 or Letter-sized plain paper is loaded in the Cassette.
See Loading Paper.
2.
Select a template form.
(1) Select Settings
(2) Select Template print
(Left) or
(Right) button to select a
template form you want to print, and press the OK button.
Note
For details on the available template forms, see Printing the Various Template Forms .
3.
Start printing.
(1) Confirm the page size.

To change the setting, use the Easy-Scroll Wheel or the
(Up) or
Note
You can only select A4 or 8.5"x11" (LTR) for Page size. The media type is limited to Plain
paper and cannot be changed.

(3) Press the Color button or the Black button.
The machine starts printing.
Printing the Various Template Forms

This section describes the template forms you can select in Template print.
Notebook paper 1
8 mm spacing
Graph paper 1
Graph 5 mm
Notebook paper 2
7 mm spacing
Notebook paper 3
6 mm spacing
Graph paper 2
Graph 3 mm
Checklist
List with checkboxes
Staff paper
Staff paper 10 staves
Page top

Advanced Guide

Troubleshooting
Contents > Other Usages > Printing Photos Directly from Your Mobile Phone or Digital Camera
Printing Photos Directly from Your Mobile Phone or Digital

Camera
Printing Photos from a PictBridge Compliant Device
Connecting the PictBridge compliant device to this machine with a USB cable that is recommended by
the device's manufacturer, you can print saved images directly.
For details on how to print saved images connecting with the PictBridge compliant device, refer to the onscreen manual: Advanced Guide .
For details on the print settings on the PictBridge compliant device, refer to the instruction manual
supplied with the device.
Connectable devices:
Any PictBridge compliant device can be connected to this machine regardless of the manufacturer or
model as long as it is compliant with the PictBridge standard.
Note
PictBridge is the standard to print your photos directly without using a computer, connecting a
device such as a digital still camera, digital camcorder, or camera-equipped mobile phone.
(PictBridge) A device with this mark is PictBridge compliant.
Printable image data format:

This machine accepts images* taken with a camera compliant with the Design rule for Camera File
system and PNG files.
* Exif 2.2/2.21 compliant
Note
When printing from the PictBridge compliant device, set the print quality using the Operation Panel on
the machine. You cannot set the print quality on the PictBridge compliant device.
Printing Photos from a Wireless Communication Device

If the optional Bluetooth Unit BU-30 is connected to the machine, you can print image data with wireless
communication from Bluetooth compatible mobile phones or computers.
For details on the operation, refer to the on-screen manual: Advanced Guide .
Page top
Machine Settings

Advanced Guide
Troubleshooting
Contents > Other Usages > Machine Settings
Machine Settings
This section describes the items you can set or change in Device settings of the Settings menu. For
details on setting or changing, refer to the on-screen manual: Advanced Guide .
Plain paper feed settings

Selects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feeds
plain paper from the Cassette by default. Use this setting to change the paper source for plain
paper to the Rear Tray.
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amount

Selects the amount of image that extends off the paper when making borderless copies.
Advanced settings
Date display
Selects the format of date that is printed or displayed on the screen.
Read/write attribute
Selects whether to use the Card Slot of the machine as the memory card drive of a computer.
Slide show setting

Selects the image display quality of the slide show.
Quiet mode
Enables this function if you want to reduce the operating noise of the machine, such as when using
the machine at night (when copying, printing from the memory card, printing from the PictBridge
compliant device, printing with wireless communication, etc.).
Guide display settings

Changes the time interval before the guide display, such as Change set. and Copy, appears at the
top of the LCD, or hides the guide display.
Key repeat
Enables to increase or decrease numbers rapidly by pressing and holding down the button when
inputting numbers. When this setting is disabled, holding down the button is the same as pressing
it once.
Mobile phone print setting

Specifies paper, layout, etc. when you print from the wireless communication device. This setting
appears only when the optional Bluetooth Unit is connected to the machine.
Bluetooth settings
Changes the Bluetooth settings, such as the device name or passkey. This setting appears only
when the optional Bluetooth Unit is connected to the machine.
PictBridge print settings

Specifies paper, print quality, etc. when you print from the PictBridge compliant device.
Language selection
Machine Settings
Changes the language for LCD messages and menus.
Reset setting
Sets the machine settings back to the default, except for the LCD language and the adjustment
values of the print head position.
Page top

Advanced Guide
Troubleshooting
Contents > Other Usages > Solution Menu and My Printer

Using Solution Menu or My Printer, you can easily get the information on the machine or change the print
settings by only clicking buttons on a screen.
With Solution Menu, you can start the software applications supplied with the machine or display the
operating instructions. It also provides you with the information on troubleshooting.
With My Printer, you can display the printer properties dialog box of the printer driver. It also provides you
with the information on how to take an action when you have trouble with the operation. My Printer is not
available in Macintosh.
To Start Solution Menu
Double-click
(Solution Menu) on the desktop.
Click Here: Solution Menu
Click
(Solution Menu) in the Dock.
* The screens below are for Windows Vista.
Click the button of a function to use.
After starting Solution Menu, click the button on the title bar to reduce the window size.
Note
Install Solution Menu from the Setup CD-ROM when it has not been installed or has been
uninstalled. To install Solution Menu, select Solution Menu in Custom Install.
The buttons displayed on the screen may vary depending on the country or region of purchase.
To start Solution Menu from the Start menu, select All Programs (Programs in Windows 2000),
Canon Utilities, Solution Menu, then Solution Menu.
To start Solution Menu from the menu bar, select the Go menu, Applications, Canon Utilities, Solution
Menu, then double-click Solution Menu.
To Start My Printer
Double-click
(My Printer) on the desktop.
Note
You can also start My Printer from Solution Menu.
Install My Printer from the Setup CD-ROM when it has not been installed or has been uninstalled. To
install My Printer, select My Printer in Custom Install.
To start My Printer from the Start menu, select All Programs (Programs in Windows 2000), Canon
Utilities, My Printer, then My Printer.
Page top

Advanced Guide
Troubleshooting
Contents > Loading Paper / Originals

This section describes types of paper or originals you can load, how to load printing paper in the Rear
Tray or Cassette, and how to load originals to copy or scan.
Loading Paper
Paper Source to Load Paper
Loading Paper
Loading Envelopes
Media Types You Can Use
Media Types You Cannot Use

Originals You Can Load
Loading Originals
Page top
Loading Paper

Advanced Guide
Troubleshooting
Contents > Loading Paper / Originals > Loading Paper
Loading Paper
Paper Source to Load Paper
The machine has two paper sources to feed paper; Cassette and Rear Tray.
You can load paper in either one of the paper sources, depending on the page size and media type of
paper. If you select Automatically Select in Paper Source, paper is fed from the Cassette or Rear Tray
depending on the selection of the page size or media type.
See Media Types You Can Use .
Note
For details on Automatically Select, see Printing Documents (Windows) or Printing Documents
(Macintosh) .
If you select A4, B5, A5, or Letter-sized plain paper when Automatically Select is selected in Paper
Source, the machine feeds the paper from the Cassette. If you select other sizes or types of paper
such as photo paper, the machine feeds the paper from the Rear Tray.
When printing, select the correct page size and media type. If you select the wrong page size or
media type, the machine may feed paper from the wrong paper source or may not print with the
proper print quality.
For details on how to load paper in each paper source, see Loading Paper or Loading Envelopes .
Loading Plain Paper in the Cassette

When you use A4, B5, A5, or Letter-sized plain paper, load it in the Cassette.
The Cassette is inserted at the bottom of the machine.
The machine feeds paper from the Cassette automatically by selecting plain paper (A4, B5, A5, or Letter
size) in the print settings with the Operation Panel or the printer driver when printing.
For details on how to change the paper source setting, refer to the on-screen manual: Advanced Guide .
Loading Photo Paper in the Rear Tray

When you use photo paper, load it in the Rear Tray.
The machine feeds paper from the Rear Tray automatically by selecting the media types other than plain
paper, such as photo paper, in the print settings with the Operation Panel or the printer driver when
printing.
When you use plain paper other than A4, B5, A5, or Letter size, also load it in the Rear Tray.
Loading Paper

Page top
Loading Paper

Advanced Guide
Troubleshooting
Contents > Loading Paper / Originals > Loading Paper > Loading Paper
Loading Paper
Important
If you cut plain paper into small size such as 4" x 6" / 10 x 15 cm, 4" x 8" / 101.6 x 203.2 mm, 5" x 7"
/ 13 x 18 cm, or 2.16" x 3.58" / 55.0 x 91.0 mm (Card size) to perform trial print, it can cause paper
jams.
Note
You can load only A4, B5, A5, or Letter-sized plain paper in the Cassette. Load other sizes or types
of paper in the Rear Tray.
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see Media Types You Can Use .
You can use general copy paper. When printing on both sides, we recommend Canon's Super
White Paper.
For the page size and paper weight you can use for this machine, see Media Types You Can Use .
Loading Paper in the Rear Tray
1.
Flatten the four corners of paper before loading it.
Note
Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
If paper is curled, hold the curled corners and gently bend them in the opposite direction until
the paper becomes completely flat.
For details on how to flatten curled paper, refer to " Troubleshooting " in the on-screen manual:
Advanced Guide.
2.
Prepare for loading paper.
Loading Paper
(1) Open the Paper Support, raise it, then tip it back.
3.
Load paper.
(1) Slide the Paper Guides (A) to open them, and load the paper in the center of the
Rear Tray WITH THE PRINT SIDE FACING YOU.
Important
Always load paper in the portrait orientation (B). Loading paper in the landscape
orientation (C) can cause paper jams.
Loading Paper
(2) Slide the Paper Guides (A) to align them with both sides of the paper stack.
Do not slide the Paper Guides too hard. The paper may not be fed properly.
Note
Do not load higher than the Load Limit Mark (D).
Note
After loading paper

When using the machine to copy or print without a computer, select the size and type of the
loaded paper in Page size and Media type of the print settings in each menu of the HOME
screen.
See Setting Items in "Printing Photos Saved on the Memory Card" and Setting Items in "Making
Copies".
When printing with a computer, select the size and type of the loaded paper in Page Size (or
Paper Size) and Media Type in the printer driver.
See Printing Documents (Windows) or Printing Documents (Macintosh) .
Loading Paper in the Cassette

You can load only A4, B5, A5, or Letter-sized plain paper in the Cassette.
See Media Types You Can Use .
1.
Flatten the four corners of paper before loading it.

See Flatten the four corners of paper before loading it. in "Loading Paper in the Rear Tray".
2.
Pull out the Cassette from the machine.
Loading Paper
3.
Load paper.
(1) Load the paper stack WITH THE PRINT SIDE FACING DOWN and THE
LEADING EDGE TO THE FAR SIDE, and align it against the right side of the
Cassette.
(2) Slide the Paper Guide (A) to align with the mark of paper size.
The Paper Guide (A) will stop when it aligns with the corresponding mark of paper size.
Note
There may be a little space between the Paper Guide (A) and the paper stack.
(3) Slide the Paper Guide (B) on the left to align completely with the side of the
paper stack.
Note
Do not load higher than the Load Limit Mark (C).
4.
Insert the Cassette into the machine.

Push the Cassette all the way into the machine.
5.
Note
Loading Paper
After loading paper

When using the machine to copy or print without a computer, select the size and type of the
loaded paper in Page size and Media type of the print settings in each menu of the HOME
screen.
See Setting Items in "Printing Photos Saved on the Memory Card" and Setting Items in "Making
Copies".
When printing with a computer, select the size and type of the loaded paper in Page Size (or
Paper Size) and Media Type in the printer driver.
See Printing Documents (Windows) or Printing Documents (Macintosh) .
Page top
Loading Envelopes

Advanced Guide
Troubleshooting
Contents > Loading Paper / Originals > Loading Paper > Loading Envelopes
Loading Envelopes
You can print on European DL and US Comm. Env. #10-sized envelopes.
The address is automatically rotated and printed according to the envelope's direction by specifying with
the printer driver properly.
Important
You can only print on envelopes with the computer.
You cannot use the following envelopes.
- Envelopes with an embossed or treated surface
- Envelopes with a double flap (or sticker flaps)
- Envelopes with pressure seals
- Envelopes whose gummed flaps are already moistened and adhesive
Note
You cannot load envelopes in the Cassette. Load them in the Rear Tray.
1.
Prepare envelopes.
Press down on all four corners and edges of the envelopes to flatten them.
If the envelopes are curled, hold the opposite corners and gently twist them in the
opposite direction.
If the corner of the envelope flap is folded, flatten it.

Use a pen to press the leading edge in the inserting direction flat and sharpen the
crease.
The figures above show a side view of the leading edge of the envelope.
Important
The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make
sure that no curl or puff exceeds 0.1 inches / 3 mm.
2.
Load envelopes.
Loading Envelopes
(B) Rear side
(C) Address side
(1) Slide the Paper Guides (A) to open them, and load the envelopes in the center of
the Rear Tray WITH THE ADDRESS SIDE FACING YOU.
The folded flap of the envelope will be faced down on the left side.
Up to 10 envelopes can be loaded at once.
(2) Slide the Paper Guides (A) to align them with both sides of the envelopes.
Do not slide the Paper Guides too hard. The envelopes may not be fed properly.
3.
Specify the settings in the printer driver.
(1) Select Envelope in Media Type.

(2) Select the size for envelopes.
Select DL Env. or Comm. Env. #10 in Page Size.
Select DL Envelope or #10 Envelope in Paper Size.
(3) Select Landscape in Orientation.

Important
If you do not specify Page Size (or Paper Size) or Orientation properly, the address will be
printed upside down or will be turned to 90 degrees.
Note
For details on the printer driver settings, see Printing Documents (Windows) or Printing
Documents (Macintosh) .
In Windows, if the print result is upside down, select Rotate 180 degrees on the Page Setup
sheet in the printer properties dialog box of the printer driver.
Page top

Advanced Guide
Troubleshooting
Contents > Loading Paper / Originals > Loading Paper > Media Types You Can Use

Choose paper suitable for printing, for the best print results. Canon provides you various types of paper
to enhance the fun of printing, such as stickers as well as papers for photo or document. We
recommend the use of Canon genuine paper for printing your important photos.
Media Types
Commercially available papers
Paper Load Limit
Name of Paper
<Model No.>
Paper Output Settings in Media Type

Tray Load
Operation
Printer
Limit
Driver
Panel
Cassette
Rear Tray
*1
Plain Paper
(Recycled
Approx. 150
sheets
A4, B5, A5, and Letter / Approx. 50

8.5" x 11": Approx. 150 sheets
sheets
Plain paper
Plain Paper
10
envelopes
Not loadable*4
Envelope
*2
paper)
Envelopes *3
*5
Canon genuine papers

Paper Load Limit
Name of
Paper <Model
Rear Tray
No.>
Cassette
Paper
Output Tray
Load Limit
Settings in Media Type

Operation
Panel
Printer
Driver
*1
For printing documents:

Super White
Paper
<SW-201>
Approx. 100 sheets
A4: Approx.
100 sheets
Approx. 50
sheets
Plain paper
Plain Paper
Not
*5
Pro Platinum
Photo Paper
Pro Platinum
Pro II
Photo Paper
For printing photos:
Photo Paper Pro A4, Letter / 8.5" x 11",

Platinum
5" x 7" / 13 x 18 cm, and
8" x 10" / 20 x 25 cm: 10
<PT-101>*6
loadable*4
sheets
Photo Paper Pro 4" x 6" / 10 x 15 cm: 20
II
Pro II
sheets
<PR-201>*6
Glossy Photo
Paper
"Everyday Use"
<GP-501>*6
Glossy
Photo Paper
Glossy
Glossy
Photo Paper
Photo Paper
Glossy Photo
Paper
Glossy Photo
Paper
<GP-502>*6
Photo Paper
Plus Glossy II
Plus Glossy
II
Photo Paper
Plus Glossy II
<PP- 201>*6
Photo Paper
Plus Semi-gloss
Plus Semi-
gloss
<SG-201>*6
Matte Photo
Paper
<MP-101>
Photo Paper
Plus Semi-
gloss
Matte Photo
Paper
Matte Photo
Paper
For printing business documents:
High Resolution
Paper
80 sheets
Not
50 sheets
High
Resolution
Paper
*5
T-Shirt
loadable*4
<HR-101N> *3
For creating your own prints:
T-Shirt
1 sheet
Not
loadable*4
Transfers
Transfers
<TR-301>*3
Photo Stickers
1 sheet
<PS-101>*7
Glossy
Photo Paper
Glossy Photo
Paper
*1 Paper with a Model Number is Canon genuine paper. Refer to the instruction manual supplied with
the paper for detailed information on the printable side and notes on handling paper. For information on
the page sizes available for each Canon genuine paper, visit our website. You may not be able to
purchase some Canon genuine papers depending on the country or region of purchase. Paper is not
sold in the US by Model Number. Purchase paper by name.
*2 Proper feeding of paper may not be possible at the maximum capacity depending on the type of paper
or environmental conditions (either very high or low temperature or humidity). In such cases, reduce the
number of paper you load at a time to less than half (100% recycled paper can be used).
*3 Available only when printing from your computer.
*4 Feeding this paper from the Cassette can damage the machine. Always load in the Rear Tray.
*5 We recommend that you remove the previously printed sheet from the Paper Output Tray before
continuously printing to avoid blurs and discoloration.
*6 When loading paper in stacks, the print side may become marked as it is fed or paper may not feed
properly. In this case, load one sheet at a time.
*7 When printing photos saved on a memory card onto sticker paper, be sure to select Sticker print in the
Memory card menu. See Printing Photos in Various Layouts .
When scanning printed photos and printing them onto sticker paper, be sure to select Sticker print in the
Easy photo reprint menu. See Printing Photos in Various Layouts .
When printing photos saved on your mobile phone onto sticker paper, select Stickers for the page size in
Mobile phone print setting. Refer to the on-screen manual: Advanced Guide .
Note
To specify the page size and media type when printing photos saved on mobile phones, refer to the
on-screen manual: Advanced Guide.
Page Sizes
You can use the following page sizes.
You can load plain paper of the following page sizes in the Cassette:
A4, B5, A5, and Letter sizes
Plain paper of other sizes cannot be loaded in the Cassette. Load them in the Rear Tray.
In Macintosh, Choukei 3 and Choukei 4 are not available.
Standard sizes:
Letter (8.50 x 11.00 inches / 215.9 x 279.4
Legal (8.50 x 14.00 inches / 215.9 x 355.6 mm)
mm)
A5 (5.83 x 8.27 inches / 148.0 x 210.0 mm)
A4 (8.27 x 11.69 inches / 210.0 x 297.0 mm)
B5 (7.17 x 10.12 inches / 182.0 x 257.0 mm)
4" x 6" (4.00 x 6.00 inches / 10 x 15 cm)
4" x 8" (4.00 x 8.00 inches / 101.6 x 203.2
5" x 7" (5.00 x 7.00 inches / 13 x 18 cm)
mm)
8" x 10" (8.00 x 10.00 inches / 20 x 25 cm)
L (3.50 x 5.00 inches / 89.0 x 127.0 mm)
2L (5.00 x 7.01 inches / 127.0 x 178.0 mm)
Hagaki (3.94 x 5.83 inches / 100.0 x 148.0 mm)
Hagaki 2 (7.87 x 5.83 inches / 200.0 x 148.0
Comm. Env. #10 (4.12 x 9.50 inches / 104.6 x 241.3
mm)
mm)
DL Env. (4.33 x 8.66 inches / 110.0 x 220.0
Choukei 3 (4.72 x 9.25 inches / 120.0 x 235.0 mm)
mm)
Choukei 4 (3.54 x 8.07 inches / 90.0 x 205.0
Youkei 4 (4.13 x 9.25 inches / 105.0 x 235.0 mm)
mm)
Youkei 6 (3.86 x 7.48 inches / 98.0 x 190.0
Card (2.16 x 3.58 inches / 55.0 x 91.0 mm)
mm)
Wide (4.00 x 7.10 inches / 101.6 x 180.6 mm)
Non-standard sizes:
You can also specify a custom size within the following range.
2.17 x 3.58 inches / 55.0 x 91.0 mm (Rear Tray)
Minimum size:
5.83 x 8.27 inches / 148.0 x 210.0 mm (Cassette)
Maximum size:
8.50 x 26.61 inches / 215.9 x 676.0 mm (Rear Tray)

8.50 x 11.69 inches / 215.9 x 297.0 mm (Cassette)
Paper Weight
17 to 28 lb / 64 to 105 gsm (plain paper except for Canon genuine paper)
Do not use heavier or lighter paper (except for Canon genuine paper), as it could jam in the machine.
Notes on Storing Paper

Take out only the necessary number of paper from the package, just before printing.
To avoid curling, when you do not print, put unused paper back into the package and keep it on a
level surface. And also, store it avoiding heat, humidity, and direct sunlight.
Page top

Advanced Guide
Troubleshooting
Contents > Loading Paper / Originals > Loading Paper > Media Types You Cannot Use

Do not use the following types of paper. Using such paper will not only produce unsatisfactory results,
but can also cause the machine to jam or malfunction.
Folded, curled, or wrinkled paper
Damp paper
Paper that is too thin (weighing less than 17 lb / 64 gsm)
Paper that is too thick (plain paper, except for Canon genuine paper, weighing more than 28 lb / 105
gsm)
Paper thinner than a postcard, including plain paper or notepad paper cut to a small size (when
printing on A5 or smaller sized paper)
Picture postcards
Postcards affixed with photos or stickers
Envelopes with a double flap (or sticker flaps)
Envelopes with pressure seals
Envelopes with an embossed or treated surface
Envelopes whose gummed flaps are already moistened and adhesive
Any type of paper with holes
Paper that is not rectangular
Paper bound with staples or glue
Paper with adhesives
Paper decorated with glitter, etc.
Page top

Advanced Guide
Troubleshooting
Contents > Loading Paper / Originals > Loading Originals to Copy or Scan

This section describes how to load originals on the Platen Glass.
You may have to load the original in a different position depending on the function you selected in the
Copy or Easy photo reprint menu. Load the original in the correct position according to the selected
function. If you do not load the original correctly, it may not be scanned properly.
Important
After loading the original, be sure to close the Document Cover before starting to copy or scan.
When scanning from a computer using a software application or saving the scanned data by
selecting PC in the Scan menu using the Operation Panel on the machine, you need to load originals
in a different way. For details, refer to the on-screen manual: Advanced Guide.
Originals You Can Load

You can copy or scan the following originals.
Types of originals:
Photos or Texts (documents, books, magazines, etc.)
Size (W x L):
Max. 8.5 x 11.7 inches / 216 x 297 mm
Note
When loading a thick original such as a book on the Platen Glass, you can load it by removing the
Document Cover from the machine. For details on how to remove or attach the Document Cover,
refer to the on-screen manual: Advanced Guide.
Page top
Loading Originals

Advanced Guide
Troubleshooting
Contents > Loading Paper / Originals > Loading Originals to Copy or Scan > Loading Originals
Loading Originals
This section describes how to load originals on the Platen Glass.
1.
Load an original on the Platen Glass.
(1) Open the Document Cover.

(2) Load the original with the side to copy or scan FACING DOWN on the Platen
Glass.
Load the original in the proper position for each function.
Important
Do not place any objects weighing more than 4.4 lb / 2.0 kg on the Platen Glass.
Do not press or put weight on the original with pressure exceeding 4.4 lb / 2.0 kg. Doing
so may cause the scanner to malfunction or the Platen Glass to break.
2.
Close the Document Cover gently.

When you select the following functions and load the original on the Platen Glass, align the upper
corner of the original with the alignment mark
regardless of the types of originals (texts or
photos).
- Selecting the Copy menu to copy originals
- Selecting USB flash drive or Memory card in the Scan menu to scan originals
- Selecting the Photo index sheet menu to scan the Photo Index Sheet
Loading Originals
Important
The machine cannot scan the shaded area (A) (0.04 inches / 1 mm from the edges of the
Platen Glass).
When you select USB flash drive or Memory card in the Scan menu, Scan size is the size
measured from the alignment mark
.
When you load the Photo Index Sheet to scan, align the corner of the sheet with the alignment
mark
Loading Printed Photos to Reprint

When you select the Easy photo reprint menu and load printed photos on the Platen Glass, place
them in an appropriate way according to the number of photos.
To load only one printed photo

Place a photo at least 0.4 inches / 10 mm away from the edges of the Platen Glass with the side to
scan FACING DOWN.
To load two or more printed photos

Place photos at least 0.4 inches / 10 mm away from the edges of the Platen Glass and at least 0.4
inches / 10 mm apart from each other.
Loading Originals
(A) 0.4 inches / 10 mm
Note
The Skew Correction function automatically compensates for photos placed at an angle of up
to approximately 10 degrees. However, slanted photos with a long edge of 7.1 inches / 180
mm or more cannot be corrected.
Page top
Routine Maintenance

Advanced Guide
Troubleshooting
Contents > Routine Maintenance
Routine Maintenance
This section describes how to replace ink tanks when they run out of ink, to clean the machine when the
print result is faint, or to take an action when paper does not feed properly.

Checking the Ink Status
Replacing Procedure
When Printing Becomes Faint or Colors Are Incorrect

Printing the Nozzle Check Pattern
Examining the Nozzle Check Pattern
Cleaning the Print Head
Cleaning the Print Head Deeply
Aligning the Print Head

Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > Replacing an Ink Tank

When ink runs out while printing is in progress, an error message appears on the LCD or your computer
screen. Make sure which ink tank has run out of ink and replace it with a new one.
Note
If the error message appears, confirm the displayed message and take an appropriate action.
For details, refer to "An Error Message Is Displayed on the LCD" in " Troubleshooting " of the onscreen manual: Advanced Guide.
For information on the compatible ink tanks, refer to the printed manual: Getting Started .
If print results become faint or white streaks appear despite sufficient ink levels, see When Printing
Becomes Faint or Colors Are Incorrect .
Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > Replacing an Ink Tank > Checking the Ink Status

You can check the ink status on the LCD or with ink lamps.
With the LCD on the Machine

(1) Make sure that the power is turned on, and press the HOME button.
(2) Press the left Function button.
Check if any symbol appears on the remaining ink volume screen.
Sufficient ink is left for printing if no symbol appears.
(Ink low) is running low. You can continue printing for a while, but we recommend you to
The ink with
have a new ink tank available.
Note
You can also check the ink status on a screen of the LCD displayed while printing.
With Ink Lamps

(1) Make sure that the power is turned on, and open the Paper Output Tray gently.
(2) Lift the Scanning Unit (Cover) until it stops.
See Lift the Scanning Unit (Cover) until it stops. in "Replacing Procedure".
(3) Check the ink lamps.
Ink lamp is on
The ink tank is correctly installed and there is sufficient ink left for printing.
Ink lamp is flashing

Flashing slowly (at around 3-second intervals)
...... Repeats
Ink is low. You can continue printing for a while, but we recommend you to have a new ink tank available.
Flashing fast (at around 1-second intervals)

...... Repeats
The ink tank is installed in the wrong position or it is empty. Make sure that the ink tank is installed in the
correct position as indicated by the label on the Print Head Holder. If the position is correct but the lamp
flashes, the ink tank is empty. Replace it with a new one.
Ink lamp is off

The ink tank is not installed properly or the function for detecting the remaining ink level is disabled. If the ink
(Push) on the ink tank until the ink tank clicks into place. If it
tank is not installed properly, press the mark
does not click into place, make sure that the orange protective cap has been removed from the bottom of
the ink tank. If the function for detecting the remaining ink level is disabled, replace the ink tank with a new
one.
See Replacing Procedure .
If the ink lamp is still off after reinstalling the ink tank, there has been an error and the machine cannot print.
Check the error message displayed on the LCD.
Refer to " Troubleshooting " in the on-screen manual: Advanced Guide.
Page top
Replacing Procedure

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > Replacing an Ink Tank > Replacing Procedure
Replacing Procedure
When the ink tanks run out of ink, follow the procedure below to replace them.
Important
Handling ink
To maintain optimal print quality, we recommend the use of specified Canon brand ink tanks. Refilling
ink is not recommended.
If you remove an ink tank, replace it immediately. Do not leave the machine with ink tanks removed.
Use new ink tanks for replacement. Installing used ink tanks may cause the nozzles to clog.
Furthermore, with such ink tanks, the machine will not be able to inform you when to replace the ink
tanks properly.
To maintain optimal print quality, install ink tanks in the machine within the date indicated on the
package box. And also use ink tanks within 6 months of first use. (We recommend you to put down
the date when installing them.)
Note
Color ink may be consumed even when printing a black-and-white document or when black-andwhite printing is specified.
Every ink is also consumed in the standard cleaning and deep cleaning of the Print Head, which
may be necessary to maintain the machine's performance. When an ink tank is out of ink, replace it
immediately with a new one.
1.
Make sure that the power is turned on, and open the Paper Output Tray gently.
2.
Lift the Scanning Unit (Cover) until it stops.

The Print Head Holder moves to the replacement position.
Caution
When opening the Scanning Unit (Cover), lift it with the Document Cover closed.
Do not hold the Print Head Holder to stop or move it forcibly. Do not touch the Print Head Holder
until it stops completely.
Do not touch the metallic parts or other parts inside the machine.
Important
If the Scanning Unit (Cover) is left open for more than 10 minutes, the Print Head Holder moves
to the right. In this case, close and reopen the Scanning Unit (Cover).
Note
The machine may make operating noise when the Print Head Holder moves to the replacement
position.
Replacing Procedure
3.
Replace the ink tank with the lamp flashing fast.

Push the tab (A) and lift the ink tank to remove.
Do not touch the Print Head Lock Lever (B).
Important
Handle the ink tank carefully to avoid staining of clothing or the surrounding area.
Discard the empty ink tank according to the local laws and regulations regarding disposal of
consumables.
Note
Do not remove two or more ink tanks at the same time. Be sure to replace ink tanks one by one
when replacing two or more ink tanks.
For details on ink lamp flashing speed, see Checking the Ink Status .
4.
Prepare the new ink tank.
(1) Take the new ink tank out of its package, pull the orange tape (
direction of the arrow to peel it off, then remove the film (
) in the
).
Important
Make sure that the film is completely removed from the air hole (C). If the air hole is blocked
with the remaining film, ink may leak out or may not eject properly.
(2) Hold the orange protective cap (D) as indicated in the figure below, then twist
and remove it from the bottom of the ink tank.
Remove the protective cap while holding it to prevent the ink from staining your fingers.
Discard the protective cap once it is removed.
Replacing Procedure
Important
Do not touch the electrical contacts (E) on the ink tank. It can cause the machine to
malfunction or become unable to print.
Important
If you shake the ink tank, the ink may leak out and stain your hands and the surrounding area.
Be careful to handle the ink tank.
Do not squeeze the side of ink tanks as this may cause the ink to leak out.
Be careful not to stain your hands and the surrounding area with ink on the removed
protective cap.
Do not reattach the protective cap once you have removed it. Discard it according to the local
laws and regulations regarding disposal of consumables.
Do not touch the open ink port once the protective cap is removed, as this may prevent the ink
from being ejected properly.
5.
Install the new ink tank.
(1) Insert the front end of ink tank into the Print Head at a slant.
Make sure that the position of the ink tank matches the label.
(2) Press the mark

place.
(Push) on the ink tank until the ink tank snaps firmly into
Make sure that the ink lamp lights up red.
Replacing Procedure
Important
You cannot print if the ink tank is installed in the wrong position. Be sure to install the ink tank in
the correct position according to the label on the Print Head Holder.
You cannot print unless all the ink tanks are installed. Be sure to install all the ink tanks.
6.
Lift the Scanning Unit (Cover) slightly, and then close it gently.
Note
If the error message appears after the Scanning Unit (Cover) is closed, refer to "
Troubleshooting " in the on-screen manual: Advanced Guide.
When you start printing after replacing the ink tank, the machine starts cleaning the Print Head
automatically. Do not perform any other operations until the machine completes the cleaning of
the Print Head.
If printed ruled lines are misaligned or the print head position is misaligned, adjust the print head
position.
The machine may make noise during operation, but this is normal.
Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect

If print results are blurred or colors are not printed correctly, the pint head nozzles are probably clogged.
Follow the procedure below to print the nozzle check pattern, check the print head nozzle condition, then
clean the Print Head.
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, aligning the Print Head
may improve print quality.
Caution
Do not rinse or wipe the Print Head and ink tanks. This can cause trouble with the Print Head and ink
tanks.
Note
Before performing maintenance

Open the Scanning Unit (Cover) and make sure that all lamps on the ink tanks are lit red.
If not, see Checking the Ink Status and take an appropriate action.
Increasing the print quality in the printer driver settings may improve the print result.
When the Print Results Are Blurred or Uneven:
Step 1
See Printing the Nozzle Check Pattern .
See Examining the Nozzle Check Pattern.
If the pattern is missing:
After cleaning the Print Head, print

and examine the nozzle check
pattern.
Step 2
See Cleaning the Print Head .
If the problem is not resolved after cleaning the Print Head
twice:
Step 3
See Cleaning the Print Head Deeply.
Note
If you have performed the procedure until step 3 and the problem has not been resolved, turn off
the power and clean the Print Head deeply again after 24 hours. If the problem is still not resolved,
the Print Head may be damaged. Contact your Canon service representative.
When the Print Results Are Not Even such as the Ruled Lines
Are Misaligned:
Note
You can also perform the maintenance operations from your computer.
Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Printing the Nozzle Check
Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.
You need to prepare: a sheet of A4 or Letter-sized plain paper

Note
If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the
ink tank whose ink is low.
See Replacing an Ink Tank .
1.
Make sure that the power is turned on.
2.
Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in
the Cassette.
3.
4.
Print the nozzle check pattern.
(1) Select Settings
(2) Select Maintenance, and press the OK button.

(3) Select Nozzle check pattern, and press the OK button.
(4) Select Yes, and press the OK button.

The nozzle check pattern will be printed and two pattern confirmation screens appear on the LCD.
5.
Examine the nozzle check pattern.

Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Examining the Nozzle Check
Pattern

Examine the nozzle check pattern, and clean the Print Head if necessary.
1.
Check if there are no missing lines in the pattern (1) or no horizontal white streaks in
the pattern (2).
(A) No missing lines/No horizontal white streaks
(B) Lines are missing/Horizontal white streaks are present
2.
Select the pattern that is closer to the printed nozzle check pattern on the
confirmation screen.
For (A) (no missing lines or no horizontal white streaks) in both (1) and (2):
Select All A and press the OK button.
The cleaning is not required.
The screen returns to the Maintenance screen.
For (B) (lines are missing or horizontal white streaks are present) in (1) or (2):
(1) Select Also B and press the OK button.

Clean the Print Head. The cleaning confirmation screen appears.
(2) Select Yes and press the OK button.

The machine starts cleaning the Print Head.
See Cleaning the Print Head .
Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Cleaning the Print Head

Clean the Print Head if lines are missing or if horizontal white streaks are present in the printed nozzle
check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the Print
Head consumes ink, so clean the Print Head only when necessary.
1.
2.
the Cassette.
3.
4.
Clean the Print Head.
(1) Select Settings

(3) Select Cleaning, and press the OK button.

The machine starts cleaning the Print Head.
Do not perform any other operations until the machine completes the cleaning of the Print Head. This takes
about 1 minute 30 seconds.

The nozzle check pattern will be printed.
5.
Check the nozzle check pattern.

Note
If the problem is not resolved after cleaning the Print Head twice, clean the Print Head deeply.
See Cleaning the Print Head Deeply.
Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Cleaning the Print Head
Deeply

If print quality does not improve by the standard cleaning of the Print Head, clean the Print Head deeply.
Cleaning the Print Head deeply consumes more ink than the standard cleaning of the Print Head, so
clean the Print Head deeply only when necessary.
1.
2.
the Cassette.
3.
4.
Clean the Print Head deeply.
(1) Select Settings

(3) Select Deep cleaning, and press the OK button.

The machine starts cleaning the Print Head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the Print Head. This
takes about 2 minutes.

The nozzle check pattern will be printed.
5.
Check the nozzle check pattern.

If a particular color is not printed properly, replace the ink tank of that color.
If the problem is not resolved, turn off the power and clean the Print Head deeply again after 24 hours.
If the problem is still not resolved, the Print Head may be damaged. Contact your Canon service representative.
Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
You need to prepare: three sheets of A4 or Letter-sized plain paper

Note
The print head alignment pattern is printed in black and blue.
To cancel the adjustment of the print head position, press the HOME button on the input screens for
the head position adjustment values.
1.
2.
Make sure that three or more sheets of A4 or Letter-sized plain paper are loaded in
the Cassette.
3.
4.
Print the print head alignment pattern.
(1) Select Settings

(3) Select Manual head align, and press the OK button.
Note
Select Head alignment print to print the current head position adjustment values.

The first print head alignment pattern will be printed.
(5) When the message "Did the patterns print correctly?" appears, confirm that the
pattern is printed correctly, select Yes, then press the OK button.
The input screen for the head position adjustment values appears.
5.
Adjust the print head position.

(Right) button to input the
(Left) or
(1) Check the printed patterns, and use the
number of the pattern that has the least noticeable streaks for column "A".
Note
If it is difficult to select the best pattern, select the pattern that has the least noticeable
vertical or horizontal streaks.
(A) Least noticeable vertical streaks

(B) Noticeable vertical streaks
(C) Least noticeable horizontal streaks
(D) Noticeable horizontal streaks
(2) Repeat the same procedure to input the pattern number for each column from
"B" to "G", and press the OK button.
(3) Confirm the message, and press the OK button.
The second print head alignment pattern will be printed.

(Left) or
(4) Check the printed patterns, use the
number of the pattern that has the least noticeable streaks for each column from
"H" to "Q", then press the OK button.
(5) Confirm the message, and press the OK button.

The third print head alignment pattern will be printed.

(Left) or
(6) Check the printed patterns, use the
number of the pattern that has the least noticeable stripes for each column from
"a" to "j", then press the OK button.
Note
If it is difficult to select the best pattern, select the pattern that has the least noticeable
horizontal stripes.
(E) Least noticeable horizontal stripes

(F) Noticeable horizontal stripes
Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > Cleaning the Paper Feed Roller

If the Paper Feed Roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the Paper Feed Roller. Cleaning will wear out the Paper Feed Roller, so perform this
only when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1.
Make sure that the power is turned on, and remove any paper from the machine.
2.
3.
Clean the Paper Feed Roller.
(1) Select Settings

(3) Select Roller cleaning, and press the OK button.

(5) Select the paper source to clean (Rear tray or Cassette), and press the OK
button.
The Paper Feed Roller will rotate as it is cleaned.
4.
Make sure that the Paper Feed Roller stops rotating, and load paper.
Load three sheets of A4 or Letter-sized plain paper in the paper source you selected in the procedure of (5) in
step 3.
5.
Repeat the procedures of (3) to (5) in step 3 again.

The paper is ejected after cleaning.
If the problem is not resolved after cleaning the Paper Feed Roller (A) in the Rear Tray, turn off the power,
unplug the power cord, then wipe the Paper Feed Roller located in the center inside the Rear Tray with a
moistened cotton swab or the like. Rotate the roller manually in the direction of the arrow (B) as you
clean it. Do not touch the roller with your fingers; rotate it with the cotton swab.
If this does not solve the problem, contact your Canon service representative.
Page top

Advanced Guide
Troubleshooting
Contents > Routine Maintenance > Cleaning the Pad in the Cassette

If the Pad in the Cassette is smeared with paper powder or dirt, two or more sheets of paper may be
ejected. Follow the procedure below to clean the Pad in the Cassette.
You need to prepare: cotton swab
1.
Pull out the Cassette from the machine, and remove all the papers.
2.
Clean the Pad sideways with a moistened cotton swab.
(A) Pad
Important
After cleaning the smeared Pad, dry it completely.
If the problem is not resolved, contact your Canon service representative.
Page top
Appendix

Advanced Guide
Troubleshooting
Contents > Appendix
Appendix
Safety Precautions
Legal Limitations on Use of Your Product and Use of Images
Page top
Safety Precautions

Advanced Guide
Troubleshooting
Contents > Appendix > Safety Precautions
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that you use the
machine safely. Do not attempt to use the machine in any way not described in this manual. It causes
unexpected accident, fire, or electrical shock.
Warning
This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor.
You may cause an electric shock, fire, or damage the machine if you ignore any of these safety
precautions.
Choosing a
location
Do not place the machine close to flammable solvents such as

alcohol or thinners.
Power
supply
Never attempt to plug in or unplug the machine from the

power supply when your hands are wet.
Always push the plug all the way into the power outlet.
Never damage, modify, stretch or

excessively bend or twist the power
cord.Do not place heavy objects on
the power cord.
Never plug the machine into a power

socket that is shared with other
equipment (extension lead/cord, 2- or
3-way adapter, etc.).
Never use the machine if the power cord is bundled or

knotted.
If you detect smoke, unusual smells or strange noises around

the machine, immediately unplug the machine at the power
supply and call for service.
Periodically, unplug the machine and
use a dry cloth to wipe off any dust or
dirt collected on the plug and the
power outlet. If the machine is placed
at a location exposed to a lot of dust,
smoke, or high humidity, the dust
collected on the plug absorbs
moisture and may cause insulation
failure and fire.
If you hear thunder, disconnect the power supply of the

machine and refrain from using it. Leaving the machine
plugged in may cause fire, electric shock, or damage to the
machine, depending on the thunder storm.
Use the power cable included with the machine.
Cleaning the
machine
Use a damp cloth to clean the

machine. Never use flammable
solvents such as alcohol, benzene or
thinners.
If flammable solvents come in contact with
electrical components inside the machine, it
could cause a fire or electric shock.
Always unplug the machine from the power outlet before
Safety Precautions

cleaning the machine.
If you accidentally switch the machine on while cleaning it, you could
injure yourself or damage the machine.
Maintaining
the machine
Do not attempt to disassemble or modify the machine. There

are no user serviceable parts inside the machine.
The machine contains high-voltage components. Never attempt any
maintenance procedure not described in this guide.
Working
around the
machine
Do not use highly flammable sprays near the machine.

This could cause a fire or electric shock if the spray comes into contact
with electrical components inside the machine.
Caution
You may cause injury or damage the machine if you ignore any of these safety precautions.
Choosing a
location
Do not install the machine in a location that is unstable or

subject to excessive vibration.
Do not install the machine in locations that are very humid or
dusty, in direct sunlight, outdoors, or close to a heating
source.
To avoid the risk of fire or electric shocks, install the machine
in a location with an ambient temperature range of 5C to 35C
(41F to 95F) and humidity of 10% to 90% (condensation free).
Do not place the machine on a thick rug or carpet.
Do not place the machine with its back attached to the wall.
Power supply
Ensure that the area around the

power outlet is kept clear at all times
so you can easily unplug the power
cord if necessary.
Never remove the plug by pulling on

the cord.
Do not use an extension lead/cord.
Working
around the
machine
Never put your hands or fingers in the machine while it is

printing.
When moving the machine, carry the machine at both ends.
Do not place any object on the machine.
Do not place metal objects (paper clips, staples, etc.) or

containers of flammable solvents (alcohol, thinners, etc.) on
top of the machine.
If any foreign object (metal or liquid) fall into the machine,
unplug the power cord and call for service.
Do not transport or use the machine on a slant, vertically or
upside-down, as the ink may leak and damage the machine.
When loading a thick book on the Platen Glass, do not press
hard on the Document Cover. The Platen Glass may break and
Safety Precautions

cause injury.
Print Heads
and ink tanks
Keep ink tanks out of the reach of children.

In case ink is accidentally licked or swallowed, rinse out mouth or give
one or two glasses of water to drink.
If irritation or discomfort occurs, obtain medical advice immediately.
In case ink gets in contact with eyes, rinse with water

immediately.
In case ink gets in contact with skin, wash with soap and
water immediately.
If irritation to eyes or skin persists, obtain medical advice immediately.
Do not shake Print Heads or ink tanks.

Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts on

a Print Head after printing.
The metal parts may be very hot and could
cause burns.
Do not throw ink tanks into fire.

Do not attempt to disassemble or modify the Print Head and
ink tanks.
Do not handle the Print Head and ink tanks roughly such as
applying them excessive pressure or dropping them.
Do not rinse or wipe the Print Head

and ink tanks.
Once you have installed the Print Head and ink tanks, do not
remove them unnecessarily.
Note when you place the machine near other electrical appliances such as fluorescent lamps
Place the machine at least 5.91 inches / 15 cm away from other electrical appliances such as
fluorescent lamps. If the machine is placed closer to those, it may not be able to work properly due
to fluorescent noises.
When you turn off the power
When you turn off the power, always press the ON button and be sure that the Power lamp (in
green) has gone out. If you disconnect the power plug from the power outlet when the Power lamp
lights or flashes, the Print Head cannot be protected and you may not be able to print later.
Page top

Advanced Guide

Troubleshooting
Contents > Appendix > Legal Limitations on Use of Your Product and Use of Images

It may be unlawful to make copies of, scan, print, or use reproductions of the following documents.
The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.
Paper money
Money orders
Certificates of deposit
Postage stamps (canceled or
uncanceled)
Identifying badges or insignias
Selective service or draft papers
Checks or drafts issued by
governmental agencies
Motor vehicle licenses and
certificates of title
Traveler's checks
Food stamps
Passports
Immigration papers
Internal revenue stamps (canceled or
uncanceled)
Bonds or other certificates of indebtedness
Stock certificates
Copyrighted works/works of art without

permission of copyright owner
Page top

Advanced Guide
Troubleshooting
Contents > Appendix > Tips on How to Use Your Machine

This section introduces the tips on how to use your machine and for printing with optimal quality.
Ink is used for various purposes.

How is ink used for various purposes other than printing?
Ink may be used for purposes other than printing. Ink is not only used for printing, but also for cleaning
the Print Head to maintain the optimal printing quality.
The machine has the function to automatically clean the ink jet nozzles to prevent clogging. In the
cleaning procedure, ink is pumped out from the nozzles. Used ink for nozzle cleaning is limited to a
small amount.
Important
The ink pumped out from the nozzles, such as when cleaning the Print Head, is absorbed by ink
absorber in the machine. The ink absorber needs to be replaced when it is full. You cannot replace
it by yourself. When the error message appears, contact your Canon service representative as
soon as possible.
Refer to "Troubleshooting " in the on-screen manual: Advanced Guide.
Does black-and-white printing use color ink?

The use of each ink varies depending on the color of image to be printed or the contents of document.
Two kinds of black ink (PGBK and BK) are used automatically depending on the media type to print or on
the settings of the printer driver. PGBK is used mainly for printing text-based documents and BK is used
mainly for printing photos, illustration, etc. Black-and-white printing may also use ink other than black ink.
So, color ink is consumed even when printing in black-and-white.
Ink lamp indicates when ink is running low.

The inside of the ink tank consists of (A) the part where ink is preserved and (B) the sponge with
absorbed ink.
When the ink (A) runs out, the ink lamp flashes slowly to indicate that the ink is running low. Then, when
the ink (B) runs out, the ink lamp flashes fast to indicate that the ink tank needs to be replaced with a new
one.
Printing on special paper: How to print with optimal quality!?
Tip!: Check the machine status before printing!

Is the Print Head OK?
If print head nozzles are clogged, print will be faint and papers will be wasted. Print the nozzle
check pattern to check the Print Head.
See When Printing Becomes Faint or Colors Are Incorrect .
Is the inside of the machine smeared with ink?

After printing large quantities of paper or performing borderless printing, the area where papers
go through may get smeared with ink. Clean the inside of your machine with the Bottom Plate
Cleaning.
Refer to the on-screen manual: Advanced Guide .
Tip!: Check how to load the paper correctly!

Is the paper loaded in the correct orientation?
When loading paper in the Rear Tray or Cassette, make sure the orientation of paper.
(A)
(B)
(A) Rear Tray

(B) Cassette
To load paper in the Rear Tray, load
paper with the printing side facing
To load paper in the Cassette, load paper with the

printing side facing down.
you.
Is the paper curled?

The curled paper causes paper jam. Flatten the curled paper, then reload it.
Refer to "Troubleshooting" in the on-screen manual: Advanced Guide .
Tip!: After loading paper, be sure to specify the paper settings!

After loading paper, be sure to select the loaded paper in Media type of the Operation Panel or Media
Type of the printer driver. If the type of paper is not selected, you may not be able to get the satisfactory
print result.
See Loading Paper .
There are various types of paper: paper with special coating on the surface for printing photos with
optimal quality and paper suitable for documents. Media type of the Operation Panel or Media Type of the
printer driver has different settings for each type of paper in advance (such as using ink, ejecting ink, or
distance from nozzles) so that you can print on each paper with the optimal image quality. You can print
with different settings in Media type (or Media Type) suitable for each type of loaded paper.
Use the Stop button to cancel printing!
Tip!: Never press the ON button!

If you press the ON button while printing is in progress, the print data sent from the computer queues in
the machine and you may not be able to continue to print.
Note
If you cannot cancel printing by pressing the Stop button while printing from a computer, open the
printer properties dialog box to delete the unnecessary print jobs from the printer status monitor
(Windows).
How to maintain the optimal printing quality?

The key to printing with the optimal printing quality is to prevent the Print Head from drying or clogging.
Always follow the following steps for optimal printing quality.
Follow the procedure below to disconnect the power plug.

1 Press the ON button on the machine to turn it off.
2 Be sure that the Power lamp is not lit.

3 Disconnect the power plug from the wall outlet, or turn off the extender cable connector.
If you press the ON button to turn off the power, the machine caps the Print Head (nozzles)
automatically to prevent from drying. If you disconnect the power plug from the wall outlet or turn
off the extender cable connector before the Power lamp is turned off, the Print Head will not be
capped properly and this will cause drying or clogging.
To disconnect the power plug, be sure to follow this procedure.
Print periodically!
Just as the tip of a felt pen becomes dry and unusable if it has not been used for a long time,
even if it is capped, the Print Head too, may become dried or clogged if the machine has not
been used for a long time.
We recommend the machine to be used at least once a month.
Note
Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen or
paint-stick, or bleed if water or sweat comes in contact with the printed area.
Does the machine need to be handled with care when using or

transporting?
Tip!: Do not use or transport the machine vertically or slanted!

If the machine is used or transported vertically or slanted, the machine may become damaged or ink
may leak from the machine.
Be sure not to use or transport the machine vertically or slanted.
Colors are uneven, and print results are blurred.
Tip!: Print the nozzle check pattern to check if the nozzles

are clogged.
If the print head nozzles are clogged, colors may become uneven or the print results may be blurred.
In this case
Print the nozzle check pattern

Check the printed check pattern to see if the nozzles are clogged.
See When Printing Becomes Faint or Colors Are Incorrect .
Page top
MP540 series Advanced Guide
MC-2862-V1.00
Basic Guide
Printing
Scanning
Copying
Printing
Printing from a Computer
Printing with the Bundled Application Software

What Is Easy-PhotoPrint EX?
Troubleshooting
Printing Photos
Starting Easy-PhotoPrint EX
Selecting a Photo
Selecting the Paper
Maintenance
Printing
About Bluetooth Communication
Creating an Album
Changing the Machine Settings
Selecting the Paper and Layout
Appendix
Selecting a Photo
Editing
When you display this On-screen
Manual in a language environment
other than English, some English
descriptions may be displayed.
Printing
Printing Calendars
Selecting a Photo
Editing
Printing
Printing Stickers
Selecting a Photo
Editing
Printing
Printing Layout
Selecting a Photo
Editing
Printing
Correcting and Enhancing Photos
Using the Auto Photo Fix Function
Using the Red-Eye Correction Function
Using the Face Brightener Function

Using the Face Sharpener Function
Using the Digital Face Smoothing Function
Using the Blemish Remover Function

Adjusting Images
Correct/Enhance Images Window
Questions and Answers

How Can I Move (or Copy) the Saved File?
Which Side of the Displayed Image Does the Printing

Start from?
How Do I Print with Even Margins?
What Is "C1" or "C4"?
Appendix 1: Easy-PhotoPrint EX Settings
Printing Vivid Photos
Reducing Photo Noise

Cropping Photos (Photo Print)
Printing Dates on Photos (Photo Print)

Printing Multiple Photos on One Page
Printing an Index
Printing ID Photos (ID Photo Print)
Printing Photo Information

Saving Photos
Opening Saved Files

Changing Layout
Changing Background
Adding Photos
Swapping Positions of Photos

Replacing Photos
Changing Position, Angle and Size of Photos
Cropping Photos
Framing Photos
Printing Dates on Photos
Attaching Comments to Photos
Adding Text to Photos
Saving
Setting Holidays
Setting Calendar Display

Printing with Other Application Software
Various Printing Methods

Printing with Easy Setup
Setting a Page Size and Orientation
Setting the Number of Copies and Printing Order

Setting the Stapling Margin
Borderless Printing
Fit-to-Page Printing
Scaled Printing
Page Layout Printing
Poster Printing
Booklet Printing
Duplex Printing
Stamp/Background Printing
Saving a Stamp Setting
Saving Image Data to be Used as a Background

Printing an Envelope

Switching the Paper Source to Match the Purpose
Displaying the Print Results before Printing
Setting Paper Dimensions (Custom Size)

Changing the Print Quality and Correcting Image Data
Selecting a Combination of the Print Quality Level
and a Halftoning Method
Printing a Color Document in Monochrome

Specifying Color Correction
Optimal Photo Printing of Image Data
Adjusting Colors with the Printer Driver
Printing with ICC Profiles
Adjusting Color Balance
Adjusting Brightness
Adjusting Intensity
Adjusting Contrast
Simulating an Illustration
Representing Image Data with a Single Color
Presenting Image Data with Vivid Colors
Smoothing Jagged Outlines

Changing Color Properties to Improve Coloration

Overview of the Printer Driver
Canon IJ Printer Driver

How to Open the Printer Driver Setup Window
Maintenance Tab
Canon IJ Status Monitor
The Canon IJ Preview
Printing Using the Operation Panel of the Machine
Printing Lined Paper or Graph Paper

Printing Template Forms Such As Lined Paper or Graph
Paper
Printing Photographs Saved on a Memory Card
Setting Items
Printing by Using the Photo Index Sheet
Using Useful Printing Functions

Printing Memory Card Photos in Various Layouts
Settings for Printing a Photo on a Memory Card
Printing Several Photos on a Single Sheet of Paper

(Layout Print)
Printing on Stickers (Sticker Print)
DPOF print
Captured info print

Photo index print
Print all photos

Printing ID Photo-ID photo size print
Creating a Calendar-Calendar print
Using Useful Display Functions

Printing a Specified Area (Trimming)

Searching for Photos with the Shooting Date
(Search)
Setting Up the Card Slot as the Memory Card Drive of the
Computer
Photo Printing from Printed Photo

Printing from Printed Photo
Setting Items

Special Printing of Photo
Settings for Printing a Scanned Photo
Printing All Photos (Print All Photos)

Printing Photographs Directly from a Compliant Device or a
Wireless Communication Device
Printing Photographs Directly from a Compliant Device

About PictBridge Print Settings
Settings on a PictBridge Compliant Device

Settings on the Machine
Printing Photographs from a Wireless Communication Device

Setting the Page Size, Media Type, and Layout When
Printing from a Mobile Phone
Displaying the Mobile phone print settings screen

Printing via Bluetooth Communication
Printing through Bluetooth Communication

Changing the Bluetooth Settings
Scanning
Scanning
Scanning Images
Scanning Images
Before Scanning
Placing Documents
Saving Scanned Data on the USB flash drive/Memory Card
Using the Operation Panel of the Machine
Saving Scanned Data on the USB flash drive/Memory
Card Using the Operation Panel of the Machine
Setting Items
Deleting Scanned Data on USB flash drive/Memory
Card
Saving Scanned Data to PC Using the Operation Panel of the
Machine
Saving Scanned Data to PC Using the Operation Panel of

the Machine
Appendix: Various Scan Settings
Selecting a Response to Commands from the

Operation Panel Using MP Navigator EX
Scanning with the Bundled Application Software
What Is MP Navigator EX (Supplied Scanner Software)?

Let's Try Scanning
Starting MP Navigator EX
Scanning Photos and Documents

Scanning Multiple Documents at One Time
Scanning Images Larger than the Platen (Stitch
Assist)
Easy Scanning with One-click
Useful MP Navigator EX Functions
Correcting/Enhancing Images Automatically

Correcting/Enhancing Images Manually
Adjusting Images
Searching Images
Classifying Images into Categories
Utilizing Images in MP Navigator EX
Saving
Saving as PDF Files
Creating/Editing PDF Files
Printing Documents
Printing Photos
Sending via E-mail
Editing Files
Setting Passwords for PDF Files
Opening/Editing Password-protected PDF Files
MP Navigator EX Screens
Navigation Mode Screen
Scan/Import Documents or Images Tab

View & Use Images on your Computer Tab
Custom Scan with One-click Tab
Photos/Documents (Platen) Screen (Scan/Import
Window)
Scan Settings Dialog Box (Photos/Documents)
Save Dialog Box
Save as PDF file Dialog Box

PDF Settings Dialog Box
Memory Card Screen (Scan/Import Window)
View & Use Window

Create/Edit PDF file Window
Print Document Dialog Box

Print Photo Dialog Box
Send via E-mail Dialog Box

One-click Mode Screen
Save Dialog Box (One-click Mode Screen)
Scan Settings Dialog Box

Save Dialog Box
Exif Settings Dialog Box
PDF Dialog Box

Mail Dialog Box
OCR Dialog Box

Custom Dialog Box
Preferences Dialog Box
General Tab
Scanner Button Settings Tab (Save)
Scanner Button Settings Tab (Attach to E-mail)
Scanner Button Settings Tab (Open with application)

Appendix: Opening Files Other than Scanned Images
Importing Images Saved on a Memory Card
Opening Images Saved on a Computer

Scanning with Other Application Software
What Is ScanGear (Scanner Driver)?
Scanning with Advanced Settings Using ScanGear

(Scanner Driver)
Starting ScanGear (Scanner Driver)
Scanning in Basic Mode

Scanning in Advanced Mode
Scanning in Auto Scan Mode
Scanning Multiple Documents at One Time in

Advanced Mode
Correcting Images and Adjusting Colors with ScanGear

(Scanner Driver)
Correcting Images (Unsharp Mask, Reduce Dust
and Scratches, Fading Correction, etc.)
Adjusting Colors Using a Color Pattern
Adjusting Saturation and Color Balance
Adjusting Brightness and Contrast
Adjusting Histogram
Adjusting Tone Curve
Setting Threshold
ScanGear (Scanner Driver) Screens
Basic Mode Tab
Advanced Mode Tab
Input Settings
Output Settings
Image Settings
Color Adjustment Buttons
Auto Scan Mode Tab

Scanner Tab
Preview Tab
Scan Tab
Color Settings Tab

Appendix: Useful Information on Scanning
Adjusting Cropping Frames
Resolution
File Formats
Color Matching
Other Scanning Methods

Scanning with WIA Driver
Scanning using the Control Panel (Windows XP Only)

Copying
Copying
Making Copies
Setting Items
Reducing or Enlarging a Copy
Changing Intensity Setting
Displaying the Preview Screen
Using Useful Copy Functions

Special Copy
Settings for Special Copy
Copying without Borders (Borderless Copy)

Copying Two Pages to Fit onto a Single Page (2-on-1
Copy)
Copying Four Pages to Fit onto a Single Page (4-on1 Copy)
Repeating an Image on a Page (Image Repeat)

Copying Thick Originals Such as Books (Frame
Erase)
Copying a Specified Area (Trimming)

Copying Images with Erasing a Part (Masking)
Troubleshooting
Troubleshooting
If an Error Occurs
The Machine Cannot Be Powered On
An Error Message Is Displayed on the LCD

LCD Cannot Be Seen At All
An Unintended Language Is Displayed on the LCD

Cannot Install the MP Drivers
Cannot Connect to Computer Properly
Printing or Scanning Speed Is Slow/Hi-Speed USB

Connection Does Not Work/"This device can perform
faster" Message Is Displayed
Print Results Not Satisfactory
Cannot Print to End of Job
No Printing Results/Printing Is Blurred/Colors Are Wrong/

White Streaks
Lines Are Misaligned

Printed Paper Curls or Has Ink Blots
Paper Is Smudged/Printed Surface Is Scratched
Back of the Paper Is Smudged
Vertical Lines Are Printed on the Sides of the Printout
Colors Are Uneven or Streaked
Printing Does Not Start

Copying/Printing Stops Before It Is Completed
Machine Moves But Ink Is Not Ejected
Printing Speed Not as Fast as Expected

Print Head Holder Does Not Move to the Position for
Replacing
Paper Does Not Feed Properly

Paper Does Not Feed from the Paper Source Specified in the
Printer Driver
Paper Jams
Message Appears on the Computer Screen
Service Error 5100 Is Displayed
Writing Error/Output Error/Communication Error
Error Number: 300 Is Displayed

Ink Info Number: 1600 Is Displayed

Other Error Messages
For Windows Users

Printer Status Monitor Is Not Displayed
The Inkjet Printer/Scanner Extended Survey Program
Screen Is Displayed
Error Message Appears on a PictBridge Compliant Device

Cannot Print Properly from a Wireless Communication Device
Cannot Print Properly from a Photo Index Sheet
Cannot Remove a Memory Card
Problems with Scanning

Scanner Does Not Work
ScanGear (Scanner Driver) Does Not Start
Error Message Appears and the ScanGear (Scanner

Driver) Screen Does Not Appear
Scan Quality (Image Displayed on the Monitor) Is Poor
Scanned Image Is Surrounded by Extra White Areas
Cannot Scan Properly with Multi Crop
Cannot Scan Properly in Auto Scan Mode
Slow Scanning Speed

"There is not enough memory." Message Is Displayed
Computer Stops Operating during Scanning

Scanner Does Not Work After Upgrading Windows
Software Problems
E-mail Software Program You Want to Use Does Not
Appear in the Screen for Selecting an E-mail Software
Program
Scanned Image Is Printed Enlarged (Reduced)

Scanned Image Is Enlarged (Reduced) on the Computer
Monitor
Scanned Image Does Not Open
MP Navigator EX Problems
Cannot Scan at the Correct Size
Position or Size of the Image Cannot be Detected

Correctly When Scanning Using the Operation Panel
Document Is Placed Correctly, but the Scanned Image Is
Slanted
Document Is Placed Correctly, but the Orientation
Changes in the Scanned Image
FAQs

If You Cannot Resolve the Problem
Instructions for Use (Printer Driver)

General Notes (Scanner Driver)
Using Easy-PhotoPrint EX
Using MP Navigator EX
About Solution Menu
Advanced Guide > How to Use This Manual

Operating the Contents Screen
Operating the Explanation Screen

Using Keywords to Find a Topic
Registering Topics to My Manual
Symbols Used in this Document
Trademarks
Page top
Advanced Guide > How to Use This Manual > Operating the Contents Screen
When you click a title displayed in the Contents screen found to the left of the On-screen Manual, the
pages of that title are displayed in the description window on the right side.
When you click
found to the left of
, the titles found in the lower hierarchies are displayed.
Note
Click
to close or display the Contents screen.

Page top
Advanced Guide > How to Use This Manual > Operating the Explanation Screen
(1) Click the green characters to jump to the corresponding page.

(2) The cursor jumps to the top of this page.
Page top
Advanced Guide > How to Use This Manual > Printing This Manual
Click
to display the Print window to the left of the On-screen Manual.
Note
Click , and then click Option Settings to display the Option Settings dialog box. You can then set up
the printing operation.
To display the Print dialog box, click and then click Print Settings. When the dialog box is
displayed, select the printer to be used for printing.
After selecting the printer to be used, click Properties... to specify the print settings.
The following four methods of printing are available:
Current Document
Selected Documents
My Manual
All Documents
Current Document
You can print the currently displayed topic.
1. From Select Target, select Current Document

The title of the currently displayed topic is displayed in the Documents to Be Printed list.
Note
By selecting Print linked documents, you can also print documents that are linked to the current
document. The linked documents are added to the Documents to Be Printed list.
Click Print Preview to display and check what the print results will look like before you actually
print the document.
2. Click Start Printing

The Print Page Count Confirmation dialog box is displayed.
3. Execute print
Confirm the number of pages to be printed, and then click Yes.
The topics that are currently displayed are printed.
Selected Documents
You can select and print the topics that you want printed.
1. From Select Target, select Selected Documents

The titles of all topics are displayed in the Documents to Be Printed list.
2. Select the topics to be printed

From the Documents to Be Printed list, select the title check boxes of the topics to be printed.
Note
When you select the Automatically select documents in lower hierarchies check box, the check
boxes of all titles found in the lower hierarchies are selected.
Click Select All to select the check boxes of all titles.
Click Clear All to clear the check boxes of all titles.
print the document.

4. Execute print
All topics with selected check boxes are printed.
My Manual
You can select and print topics registered in My Manual.
For details about My Manual, see " Registering Topics to My Manual ."
1. From Select Target, select My Manual

The titles of the topics that have been registered to My Manual are displayed in the Documents to Be
Printed list.
2. Select the topics to be printed

From the Documents to Be Printed list, select the title check boxes of the topics to be printed.
Note

print the document.

4. Execute print
All topics with selected check boxes are printed.
All Documents
You can print all topics of the On-screen Manual.
1. From Select Target, select All Documents

The titles of all topics are displayed in the Documents to Be Printed list, and the check boxes are
automatically selected.
Note
If you clear the check box of a topic, that topic is not printed.
print the document.

3. Execute print
All topics are printed.
Important
A large amount of paper is necessary to print all topics. Before printing, be sure to check the
number of print pages displayed in the Print Page Count Confirmation dialog box.
You can change the print magnification from the Print Preview dialog box. However, if the print
data extends outside the paper with the new magnification, the portion of the document will not
be printed on the paper.
Page top
Advanced Guide > How to Use This Manual > Using Keywords to Find a Topic

You can enter a keyword to search for a target page.
All installed On-screen Manuals (user's guides) are searched.
1. Click
A search window is displayed to the left of the On-screen Manual.
Note
Click
to close or display the Search window.
2. Enter a keyword
In Keyword, enter a keyword for the item to be checked.
If you want to enter multiple keywords, insert a space between the keywords.
Note
You can enter up to 10 keywords or up to 255 characters.

Uppercase and lowercase are not discriminated.
The program can also search for keywords that contain spaces.
3. Click Start Searching

The search is started, and the titles of topics containing the keyword are displayed in the search
results list.
When you execute a search by entering multiple keywords, the search results are displayed as
shown below.
[Documents Containing Perfect Match]
Topics containing the entire search character string (including spaces) exactly as entered (perfect
match)
[Documents Containing All Keywords]
Topics containing all keywords that were entered
[Documents Containing Any Keyword]
Topics containing at least one of the keywords that were entered
4. Display the topic that you want to read

From the search results list, double-click (or select and press Enter) the title of the topic you want to
read.
When the pages of that title are displayed, the keywords found on those pages are highlighted.
Page top
Advanced Guide > How to Use This Manual > Registering Topics to My Manual

Register frequently read pages as My Manual topics so that you can refer to those pages easily at any
time.
1. Display the topic

Display the topic to be added to My Manual.
2. Click
The My Manual window is displayed to the left of the On-screen Manual.
Note
Click
to close or display the My Manual window.
3. Register the topic to My Manual

Click Add.
The currently displayed topic is added to List of My Manual.
Note
Alternatively, from the Recently Displayed Documents list, double-click (or select and press
Enter) the topic to be added to My Manual to display that topic, and then click Add.
4. Display My Manual
When you double-click (or select and press Enter) a topic displayed in List of My Manual, that topic is
displayed in the Description window.
Note
To delete a topic from List of My Manual, select that topic from the list, and then click Delete (or
press Delete).
Page top
Advanced Guide > How to Use This Manual > Symbols Used in this Document

Warning
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation
of the equipment. These must be observed for safe operation.
Caution
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Important
Instructions that must be observed for safe operation.
Note
Instructions as notes for operation or additional explanations.
Indicates operations in Windows.
Indicates operations in Macintosh.

Page top
Trademarks
Advanced Guide > How to Use This Manual > Trademarks
Trademarks
Microsoft is a registered trademark of Microsoft Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other
countries.
Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
Adobe, Adobe Photoshop, Adobe RGB and Adobe RGB (1998) are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc.,U.S.A. and licensed to Canon Inc.
Page top
Advanced Guide > Printing from a Computer

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software

Printing Photos
Creating an Album
Printing Calendars
Printing Stickers
Printing Layout

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > What Is Easy-PhotoPrint
EX?

Easy-PhotoPrint EX allows you to create albums, calendars and stickers easily using photos taken with
digital cameras.
You can also print borderless photos easily.
Important
Easy-PhotoPrint EX does not support Windows 95, Windows 98, Windows Me, or Windows NT4.
Easy-PhotoPrint EX can only be used with Canon inkjet printers. It does not support some printers,
including Canon compact printers (SELPHY CP series).
If a printer that supports Easy-PhotoPrint EX is not installed, you cannot print items you create.
If Easy-PhotoPrint EX is installed on a computer that already has Easy-LayoutPrint installed, EasyLayoutPrint will be replaced by Easy-PhotoPrint EX.
Note
Printing on paper larger than A4 is available with supported printers only. See your printer manual
for details.
See Help of Easy-PhotoPrint EX for descriptions of Easy-PhotoPrint EX screens.
Click Help in a screen or dialog box, or select Easy-PhotoPrint EX Help from the Help menu. Help
appears.
About Exif Print

Easy-PhotoPrint EX supports "Exif Print." Exif Print is a standard for enhancing the communication
between digital cameras and printers.
By connecting to an Exif Print-compliant digital camera, the image data at the time of shooting is used
and optimized, yielding extremely high quality prints.
Starting Easy-PhotoPrint EX from Other Applications

Easy-PhotoPrint EX can be started from other applications.
See the application's manual for details on the procedure for starting.
The Album function is available with the following applications:
MP Navigator EX Ver.1.00 or later
ZoomBrowser EX Ver.5.8 or later
The Photo Print function is available with the following applications:

MP Navigator EX Ver.1.00 or later
ZoomBrowser EX Ver.6.0 or later
Digital Photo Professional Ver.3.2 or later

Note
Easy-PhotoPrint EX is subject to the following restrictions when started from Digital Photo
Professional:
- Menu does not appear in the step button area on the left side of the screen.
- Images cannot be corrected/enhanced.
- Image display order cannot be changed.
- Edited images cannot be saved.
- Options other than Enable ICC Profile cannot be selected for Color correction for printing on the
Advanced tab of the Preferences dialog box. Therefore, you cannot use the Vivid Photo and Photo
Noise Reduction functions.
Supported Image File Formats (Extensions)

BMP (.bmp)
JPEG (.jpg, .jpeg)
TIFF (.tif, .tiff)
PICT (.pict, .pct)
Easy-PhotoPrint image files (.epp)

Important
When selecting an image, if there is a TIFF file in the selected folder, the image may not be
displayed correctly or Easy-PhotoPrint EX may shut down depending on the TIFF format. In such
cases, move the TIFF file to another folder or recreate the file in a different file format, and then
select the folder again.
The thumbnails of files in unsupported formats are displayed as
(Question Mark).
Note
When Easy-PhotoPrint EX is started from Digital Photo Professional, all image files supported by
Digital Photo Professional will be displayed.
File Formats (Extensions) Supported by Easy-PhotoPrint EX

Easy-PhotoPrint EX Photo Print file (.el6)
Easy-PhotoPrint EX Album file (.el1)
Easy-PhotoPrint EX Stickers file (.el2)
Easy-PhotoPrint EX Calendar file (.el4)

Easy-PhotoPrint EX Layout file (.el5)
Page top
Printing Photos
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos
Printing Photos
Easy-PhotoPrint EX allows you to print your favorite photos in a variety of layouts.
You can also create borderless photos easily.
Corrections suitable for photos will be applied automatically when printing.
Steps
1. Starting Easy-PhotoPrint EX
2. Selecting a Photo
3. Selecting the Paper
4. Printing
Try This

Printing an Index

Saving Photos
Opening Saved Files

Which Side of the Displayed Image Does the Printing Start from?
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Starting
Easy-PhotoPrint EX
1. From the Start menu, select (All) Programs > Canon Utilities > Easy-PhotoPrint EX
> Easy-PhotoPrint EX.
Easy-PhotoPrint EX starts and Menu appears.
Page top
Selecting a Photo
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos >
Selecting a Photo
Selecting a Photo
1. Click Photo Print from Menu.
The Select Images screen appears.
Important
The reduced images (thumbnails) displayed in the screen may appear as follows:
- A black line appears along an edge of the image.
- An edge of the image appears cropped.
However, such images will be displayed normally when enlarged or previewed, and print
results will not be affected.
2. Select the folder that contains the image you want to print from the folder tree area.
The images in the folder will be displayed as thumbnails (miniatures).
Note
If Easy-PhotoPrint EX is started from another application (MP Navigator EX, ZoomBrowser EX

or Digital Photo Professional), the folder tree area will not be displayed.
The images opened in the application will be displayed as thumbnails.
3. Click the image you want to print.

The number of copies appears as "1" below the clicked image, while the selected image itself will
appear in the selected image area.
Note
To delete an image in the selected image area, select the image you want to delete and click
(Delete Imported Image).
To delete all images from the selected image area, click

To print two or more copies of an image, click
(Delete All Imported Images).
(Up arrow) until the number of copies you
want is reached. To reduce the number of copies shown in the box, click
(Down arrow).
You can change the order of photos using the list located at the top right corner of the screen.
You can select the printing order from Sort by Date and Sort by Name.
Selecting a Photo
Note
You can correct or enhance the selected image before printing.

See Help for details on the Select Images screen.
Page top
Selecting the Paper
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos >
Selecting the Paper
Selecting the Paper

1. Click Select Paper.
The Select Paper screen appears.
2. Set the following items according to the printer and paper to be used:
Printer
Paper Source
Paper Size
Media Type
Note
The paper sizes and media types may vary depending on the printer. See Help for details.
The paper sources may vary depending on the printer and the media type.
Important
When Fine Art Photo Rag is selected for Media Type, a 1.38 inch (35 mm) margin is automatically
left at the top and bottom of the paper.
It is recommended that you check the print range with the image shown in Preview before printing.
Note
You can print photos with more vivid colors or you can reduce the photo noise.
See Help for details on the Select Paper screen.
Page top
Printing
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Photos > Printing
Printing
1. Click Layout/Print.
The Layout/Print screen appears.
Important
The reduced images (thumbnails) displayed in the screen may appear as follows:
- A black line appears along an edge of the image.
- An edge of the image appears cropped.
However, such images will be displayed normally when enlarged or previewed, and print
results will not be affected.
2. Select a layout you want to use.

Click a borderless layout to print borderless photos.
Note
The layouts that can be selected may vary depending on the printer, paper size, and media
type.
3. Click Print.
Important
When you print on large size paper such as A3/A3+, some computers cannot print properly if you
print more than one page or copy at a time. It is recommended that you print page by page when
you print on such paper.
While printing on paper larger than A4 or printing high-resolution images, data may be printed only
to the middle if many images are printed at one time. In such cases, select the Spool print job page
by page checkbox in the Preferences dialog box, and then print again.
To display the Preferences dialog box, click

(Settings) or select Preferences... from the File
menu.
When Fine Art Photo Rag is selected for Media Type in the Select Paper screen, a 1.38 inch (35
mm) margin is automatically left at the top and bottom of the paper.
It is recommended that you check the print range with the image shown in Preview before printing.
Note
The photo print settings will be discarded if you exit Easy-PhotoPrint EX without saving the settings.
Printing
It is recommended that you save the printed image if you want to print it again.
Saving Photos
When you print on a bordered layout, the margins on the left and right or the top and bottom may
become wider than the other.
You can crop images or print dates on photos.
You can correct or enhance the selected image before printing.
You can specify advanced Photo Print settings (number of copies, print quality, etc.) in the
Preferences dialog box.

menu.
See Help for details on the Layout/Print screen.
Page top
Creating an Album
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album
Creating an Album
Easy-PhotoPrint EX allows you to create your own personalized photo album.
Steps
2. Selecting the Paper and Layout
4. Editing
5. Printing
Try This
Changing Layout
Changing Background
Adding Photos
Replacing Photos
Cropping Photos
Framing Photos

Saving
Opening Saved Files

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Creating an Album >
Page top

1. Click Album from Menu.
The Page Setup screen appears.
2. Set the following items in the General Settings section:

Paper Size
Orientation
Cover
Double page album

Page number
Note
See Help on the paper size that can be selected.

You can select whether to display images on the inside of the front and back covers in the
Cover Options dialog box. To display the Cover Options dialog box, select Front or Front & Back
for Cover and click Options....
Select the Double page album checkbox to enable the spread page layout (consisting of twopage master). In a double-page album, you can arrange an image across the left and right
pages.
You can customize the page numbers (position, font size, etc.) in the Page Number Settings
dialog box. To display the Page Number Settings dialog box, select the Page number checkbox
and click Settings....
You can customize the margins of the front cover, inside pages and back cover in the Margin
Settings dialog box. To display the Margin Settings dialog box, click Margins....
3. Select the theme you want to use from Theme in Sample Layout.
4. If you want to change the layout, click Layout....
The Change Layout dialog box appears.
In the Change Layout dialog box, you can change the layout or select whether to print the date (on
which the picture was taken) on the photo.
Note
The album layouts that can be selected may vary depending on the Paper Size, Orientation,
Double page album, or the type of page selected (front cover, inside pages or back cover).
You can customize the date (position, size and color) in the Date Settings dialog box. To
display the Date Settings dialog box, select the Print date checkbox in the Change Layout
dialog box and click Date Settings....
5. If you want to change the background, click Background....

The Change Background dialog box appears.
In the Change Background dialog box, you can paint the background in a single color or paste an
image file to it.
Note
See Help for details on the Page Setup screen.
Page top
Selecting a Photo
Selecting a Photo
Selecting a Photo
1. Click Select Images.
Note
If Easy-PhotoPrint EX is started from another application (MP Navigator EX or ZoomBrowser

EX), the folder tree area will not be displayed.
The images opened in MP Navigator EX or ZoomBrowser EX will be displayed as thumbnails.
3. Select the image(s) you want to print, and click one of the buttons below.
To print on the front cover, click
To print on the inside pages, click

To print on the back cover, click
(Import to Front Cover).
(Import to Inside Pages).

(Import to Back Cover).
The selected images are displayed in the selected image area.

You can also select the image(s) you want to print by dragging them into the selected image area.
Note

Note
Selecting a Photo
Page top
Editing
Editing
Editing
1. Click Edit.
The Edit screen appears.
2. Edit your album if necessary.

Changing Layout
Changing Background
Adding Photos

Replacing Photos
Cropping Photos
Framing Photos
Note
The edit information will be discarded if you exit Easy-PhotoPrint EX without saving the edited
album. It is recommended that you save the item if you want to edit it again.
The page numbers on the front and back covers of the album are displayed as follows:
C1: Front cover
C2: Inside the front cover
C3: Inside the back cover

C4: Back cover
Saving
See Help for details on the Edit screen.
Editing

Page top
Printing
Printing
Printing
1. Click Print Settings.
The Print Settings screen appears.
Printer
Media Type
Copies
Paper Source
Print Quality
Borderless Printing
Note
The media types may vary depending on the printer and the paper size.
Duplex Printing appears if the selected printer and media type support duplex printing. Select
this checkbox to print on both sides of the paper.
Automatic appears if you select the Duplex Printing checkbox after selecting a printer that
supports automatic duplex printing and media type that supports duplex printing. Select this
checkbox to print on both sides of the paper automatically.
You can set a custom print quality level in the Print Quality Settings dialog box. To display the
Print Quality Settings dialog box, select Custom for Print Quality and click Quality Settings....
Select the Borderless Printing checkbox to print borderless photos.
You can specify the print range and the amount of extension for borderless printing in the Print
Settings dialog box. To display the Print Settings dialog box, click Advanced....
3. Click Print.
Note
See Help for details on the Print Settings screen.
Printing

Page top
Printing Calendars
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars
Printing Calendars
Easy-PhotoPrint EX allows you to create your own calendar using your favorite photos.
Steps
4. Editing
5. Printing
Try This
Changing Layout
Changing Background
Adding Photos
Replacing Photos
Cropping Photos
Framing Photos


Setting Holidays
Saving
Opening Saved Files

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Calendars >
Page top

1. Click Calendar from Menu.

Paper Size
Orientation
Start from
Period
Note

You can add holidays to your calendar.
Setting Holidays
3. Select a layout.
If necessary, make advanced settings on the calendar and set the background.
Note
You can customize the calendar display (font colors of the dates and days of the week, position
and size of the calendar, etc.).
You can paint the background in a single color or paste an image file to it in the Change
Background dialog box. To display the Change Background dialog box, click Background....
Note
Page top
Selecting a Photo
Selecting a Photo
Selecting a Photo
3. Select the image(s) you want to print and click

Note
Note
Page top
Editing
Editing
Editing
1. Click Edit.
2. Edit the calendar if necessary.

Changing Layout
Changing Background
Adding Photos

Replacing Photos
Cropping Photos
Framing Photos

Setting Holidays
Note
calendar. It is recommended that you save the item if you want to edit it again.
Saving
Page top
Printing
Printing
Printing
Printer
Media Type
Copies
Paper Source
Print Quality
Borderless Printing
Note
3. Click Print.
Note
Page top
Printing Stickers
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers
Printing Stickers
You can print your favorite photos on compatible sticker sheets.
Steps
4. Editing
5. Printing
Try This
Adding Photos
Replacing Photos
Cropping Photos
Framing Photos
Saving
Opening Saved Files

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers >
Page top

1. Click Stickers from Menu.

Paper Size
Orientation
Print date
Use the same image in all frames

Note
Paper sizes other than Photo Stickers cannot be selected.

Select the Use the same image in all frames checkbox to use the same image in all the
frames on the page.
display the Date Settings dialog box, select the Print date checkbox and click Date Settings....
Note
Page top
Selecting a Photo
Selecting a Photo
Selecting a Photo

Note
Note
Page top
Editing
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Stickers > Editing
Editing
1. Click Edit.
2. Edit the stickers if necessary.

Adding Photos

Replacing Photos
Cropping Photos
Note
stickers. It is recommended that you save the item if you want to edit it again.
Saving
Page top
Printing
Printing
Printing
Printer
Media Type
Copies
Paper Source
Print Quality
Borderless Printing
Note
You can adjust the printing position in the Adjust Print Position dialog box. To display the Adjust
Print Position dialog box, click Print Position....
3. Click Print.
Note
Page top
Printing Layout
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout
Printing Layout
You can add text to your favorite photos and print them in a variety of layouts.
Steps
4. Editing
5. Printing
Try This
Changing Layout
Adding Photos
Replacing Photos
Cropping Photos

Saving
Opening Saved Files

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Starting
Easy-PhotoPrint EX
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout >

1. Click Layout Print from Menu.

Paper Size
Orientation
Print date
Note

display the Date Settings dialog box, select the Print date checkbox and click Date Settings....
3. Select a layout from Layouts.

Note
The layouts displayed may vary depending on the Orientation.

Note
Page top
Selecting a Photo
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout >
Selecting a Photo
Selecting a Photo

Note
Note
Page top
Editing
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Editing
Editing
1. Click Edit.
2. Edit the layout if necessary.

Changing Layout
Adding Photos

Replacing Photos
Cropping Photos
Note
The edit information will be discarded if you exit Easy-PhotoPrint EX without saving the edited layout.
It is recommended that you save the item if you want to edit it again.
Saving
Page top
Printing
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Printing Layout > Printing
Printing
Printer
Media Type
Copies
Paper Source
Print Quality
Borderless Printing
Note
Select the Borderless Printing checkbox to print borderless photos.
3. Click Print.
Note
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Correcting and
Enhancing Photos

You can correct and enhance images.
(Correct/Enhance Images) in the Select Images or Edit screen, or in the Layout/Print screen of
Click
Photo Print. You can make the following corrections and enhancements in the Correct/Enhance Images
window.
Important
For Photo Print, if you select Enable ICC Profile in the Advanced tab of the Preferences dialog box,
you cannot correct/enhance images.
Note
See "Correct/Enhance Images Window " for details on the Correct/Enhance Images window.
Auto Photo Fix

This function will automatically analyze the captured scene and apply suitable corrections.
Red-Eye Correction Function

You can correct red eyes caused by a camera flash.
Face Brightener Function

You can brighten dark faces caused by bright background.
Face Sharpener Function

You can sharpen out-of-focus faces in a photo.
Digital Face Smoothing Function

You can enhance skin beautifully by removing blemishes and wrinkles.
Blemish Remover Function

You can remove moles.
Image Adjustment
You can make fine adjustments to the overall brightness, contrast, etc. of images.
Adjusting Images
Page top
Enhancing Photos > Using the Auto Photo Fix Function

Apply optimum corrections automatically to the photos used for an album or calendar.
Important
The Auto Photo Fix function is not available for Photo Print. Photo Print allows you to automatically
apply suitable corrections to all photos when printing. Select this option in Image on the Advanced
tab of the Preferences dialog box. To display the Preferences dialog box, click
(Settings) in the
Layout/Print screen or select Preferences... from the File menu.
Once image is corrected with Auto Photo Fix and saved, it cannot be corrected again with Auto
Photo Fix.
Also, Auto Photo Fix may not be available for images edited using an application, digital camera,
etc. manufactured by other companies.
1. Select photos in the Select Images screen, then click
(Correct/Enhance
Images).
The Correct/Enhance Images window appears.
Note
(Correct/Enhance
You can also display the Correct/Enhance Images window by clicking
Images) in the Layout/Print or Edit screen. In that case, only the image displayed in Preview
can be corrected/enhanced.
2. Select the image you want to correct from the list displayed in the lower part of the
Correct/Enhance Images window.
The image appears in Preview.
Note
If only one image is selected, the thumbnail does not appear below Preview.
3. Make sure that Auto is selected.
4. Click Auto Photo Fix, then click OK.

The entire photo is corrected automatically and the
the upper left of the image.
(Correction/Enhancement) mark appears on
Note
(Compare) to display the images before and after the correction side by side so that
Click
you can compare and check the result.
Click Reset Selected Image to undo the correction operation.
If you want to apply the correction to all the selected images at once, select the Apply to all
images checkbox.
5. Click Save Selected Image or Save All Corrected Images.

You can save corrected images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Only JPEG/Exif file format is available for corrected images.
6. Click Exit.
Note
The corrections will be lost if you exit before saving corrected images.
Page top
Enhancing Photos > Using the Red-Eye Correction Function

You can correct red eyes caused by a camera flash.
You can perform the Red-Eye Correction function either automatically or manually.
Note
Photo Print allows you to automatically correct red eyes when printing. To correct automatically,
select Enable Auto Photo Fix in Color correction for printing on the Advanced tab of the Preferences
dialog box and select the Enable Red-Eye Correction checkbox.
(Correct/Enhance
Images).
Note
(Correct/Enhance
Note
Auto Correction

4. Click Red-Eye Correction.
5. Click OK.
Red eyes are corrected and the
the image.
(Correction/Enhancement) mark appears on the upper left of
Important
Areas other than the eyes may be corrected depending on the image.
Note
Click
images checkbox.
Manual Correction
3. Click Manual, then click Correct/Enhance.

4. Click Red-Eye Correction.
Move the cursor over the image. The shape of the cursor changes to
(Paintbrush).
5. Drag to select the red area you want to correct, then click OK that appears over the
image.
Red eye is corrected and the
(Correction/Enhancement) mark appears on the upper left of the
image.
Note
Click Undo to undo the preceding correction operation.

Effect levels can be changed using the slider below Red-Eye Correction.

Note
Corrected Images.
7. Click Exit.
Note
Page top
Enhancing Photos > Using the Face Brightener Function

You can brighten dark faces caused by bright background.
(Correct/Enhance
Images).
Note
(Correct/Enhance
Note

4. Click Face Brightener.
(Cross).
5. Drag to select the area you want to correct, then click OK that appears over the
image.
The entire image is corrected so that the selected area containing the face becomes brighter, and
the
(Correction/Enhancement) mark appears on the upper left of the image.

Note
You can also drag to rotate the rectangle.

Effect levels can be changed using the slider below Face Brightener.

Note
Corrected Images.
7. Click Exit.
Note
Page top
Enhancing Photos > Using the Face Sharpener Function

You can sharpen out-of-focus faces in a photo.
You can perform the Face Sharpener function either automatically or manually.
(Correct/Enhance
Images).
Note

(Correct/Enhance
Note
Auto Correction

4. Click Face Sharpener.
5. Click OK.
The face is sharpened and the
image.
(Correction/Enhancement) mark appears on the upper left of the
Note
Effect levels can be changed using the slider below Face Sharpener.
Click
images checkbox.
Manual Correction

4. Click Face Sharpener.
(Cross).
5. Drag to select the area you want to correct, then click OK that appears over the
image.
The facial area in and around the selected area is sharpened and the
Enhancement) mark appears on the upper left of the image.
(Correction/
Note

Effect levels can be changed using the slider below Face Sharpener.

Note
Corrected Images.
7. Click Exit.
Note
Page top
Enhancing Photos > Using the Digital Face Smoothing Function

You can enhance skin beautifully by removing blemishes and wrinkles.
You can perform the Digital Face Smoothing function either automatically or manually.
(Correct/Enhance
Images).
Note

(Correct/Enhance
2. Select the image you want to enhance from the list displayed in the lower part of the
Note
Auto Enhancement

4. Click Digital Face Smoothing.
5. Click OK.
Skin is enhanced beautifully and the
of the image.
(Correction/Enhancement) mark appears on the upper left
Note
Effect levels can be changed using the slider below Digital Face Smoothing.
(Compare) to display the images before and after the enhancement side by side so
Click
that you can compare and check the result.
Click Reset Selected Image to undo the enhancement operation.
If you want to apply the enhancement to all the selected images at once, select the Apply to all
images checkbox.
Manual Enhancement

4. Click Digital Face Smoothing.
(Cross).
5. Drag to select the area you want to enhance, then click OK that appears over the
image.
Skin in and around the selected area is enhanced beautifully and the
mark appears on the upper left of the image.
(Correction/Enhancement)
Note

Click Undo to undo the preceding enhancement operation.
Effect levels can be changed using the slider below Digital Face Smoothing.

You can save enhanced images as new files.
Note
Corrected Images.
Only JPEG/Exif file format is available for enhanced images.
7. Click Exit.
Note
The enhancements will be lost if you exit before saving enhanced images.
Page top
Enhancing Photos > Using the Blemish Remover Function

You can remove moles.
(Correct/Enhance
Images).
Note
(Correct/Enhance
2. Select the image you want to enhance from the list displayed in the lower part of the
Note

4. Click Blemish Remover.
(Cross).
5. Drag to select the area you want to enhance, then click OK that appears over the
image.
Moles in and around the selected area are removed and the
appears on the upper left of the image.
(Correction/Enhancement) mark
Note
Click Undo to undo the preceding enhancement operation.

You can save enhanced images as new files.
Note
Corrected Images.
Only JPEG/Exif file format is available for enhanced images.
7. Click Exit.
Note
The enhancements will be lost if you exit before saving enhanced images.
Page top
Adjusting Images
Enhancing Photos > Adjusting Images
Adjusting Images
(Correct/Enhance
Images).
Note
(Correct/Enhance
2. Select the image you want to adjust from the list displayed in the lower part of the
Note
3. Click Manual, then click Adjust.

4. Move the slider of the item you want to adjust and set the effect level.
The following adjustments are available:
Brightness
Contrast
Sharpness
Blur
Show-through Removal
Adjusting Images
Note
Click Defaults to reset all adjustments.

You can save adjusted images as new files.
Note
Corrected Images.
Only JPEG/Exif file format is available for adjusted images.
6. Click Exit.
Note
The adjustments will be lost if you exit before saving adjusted images.
Page top
Enhancing Photos > Correct/Enhance Images Window

You can correct/enhance images in this window.
To display the Correct/Enhance Images window, click
(Correct/Enhance Images) in the Select
Images or Edit screen, or in the Layout/Print screen of Photo Print.
(1)Toolbar
Toolbar
(Zoom In/Zoom Out)
Displays the enlarged or reduced preview of the page.

(Full Screen)
Displays the entire image in Preview.

(Compare)
Displays the Compare Images window. You can compare the images before and after the correction
side by side.
The image before the correction/enhancement is displayed on the left, and the image after the
correction/enhancement is displayed on the right.
(2)Task Area
Available tasks and settings may vary between the Auto and Manual tabs.
Click Auto or Manual to display the corresponding tab.
Auto Tab
Select to correct automatically.
Auto Photo Fix
Applies automatic corrections suitable for photos.

Important
The Auto Photo Fix function is not available for Photo Print. Photo Print allows you to
automatically apply suitable corrections to all photos when printing. Select this option in Image
on the Advanced tab of the Preferences dialog box. To display the Preferences dialog box, click
(Settings) in the Layout/Print screen or select Preferences... from the File menu.
Red-Eye Correction
Corrects red eyes.

Note
For Photo Print, you can also correct red eyes by selecting Enable Auto Photo Fix in Color
correction for printing on the Advanced tab of the Preferences dialog box and selecting the
Enable Red-Eye Correction checkbox.
Face Sharpener
Sharpens out-of-focus faces.

You can adjust the effect level using the slider.
Digital Face Smoothing
Enhances skin beautifully by removing blemishes and wrinkles.

Apply to all images
Automatically corrects all the images displayed in the list.

OK
Applies the selected effect to the selected image or all images.

Reset Selected Image
Cancels all corrections and enhancements applied to the selected image.

Save Selected Image
Saves the selected image.

Save All Corrected Images
Saves all the images displayed in the list.

Exit
Click to close the Correct/Enhance Images window.
Manual Tab
Select to correct manually.
Use Adjust to adjust brightness and contrast, or to sharpen the entire image.
Use Correct/Enhance to correct/enhance specific areas.
Adjust
Brightness
Adjusts the overall image brightness.

Move the slider to the left to darken and right to brighten the image.
Contrast
Adjusts the contrast of the image. Adjust the contrast when the image is flat due to lack of contrast.
Move the slider to the left to decrease and right to increase the contrast of the image.
Sharpness
Emphasizes the outline of the subjects to sharpen the image. Adjust the sharpness when the photo
is out of focus or text is blurred.
Move the slider to the right to sharpen the image.
Blur
Blurs the outline of the subjects to soften the image.

Move the slider to the right to soften the image.
Removes show-through of text from the reverse side or removes the base color. Adjust the showthrough level to prevent text on the reverse side of thin document or the base color of the document
from appearing on the image.
Move the slider to the right to increase the show-through removal effect.
Defaults
Resets all adjustments (brightness, contrast, sharpness, blur, and show-through removal).
Cancels all adjustments applied to the selected image.

Save Selected Image


Exit

Correct/Enhance
Red-Eye Correction
Corrects red eyes.

You can specify the area you want to apply the effect to. You can adjust the effect level using the
slider.
Note
For Photo Print, red eyes are automatically corrected when Enable Auto Photo Fix is selected in
Color correction for printing on the Advanced tab of the Preferences dialog box and the Enable
Red-Eye Correction checkbox is selected. To disable the automatic correction, deselect the
checkbox.
Face Brightener
Corrects the entire image so that the selected facial area is brightened.
Face Sharpener

slider.

slider.
Blemish Remover
Removes moles.
You can specify the area you want to apply the effect to.
Undo
Cancels the latest correction/enhancement.

OK
Applies the selected effect to the specified area.


Save Selected Image


Exit

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Questions and Answers

Page top
> How Can I Move (or Copy) the Saved File?

If you want to move (or copy) a file created and saved with Easy-PhotoPrint EX from one folder to another,
you need to move (or copy) the folder that was automatically created when originally saving that file as
well.
For example, when you save a file named "MyAlbum.el1," a folder named "MyAlbum.el1.Data" is
automatically created in the same folder that contains the "MyAlbum.el1" file. If you want to move (or copy)
the "MyAlbum.el1" file to another folder, move (or copy) the "MyAlbum.el1.Data" folder as well.
The "MyAlbum.el1.Data" folder contains the photos used in the album.
Note
The icons may vary depending on the items.

Important
Do not change the Data folder name; otherwise you will not be able to display the photos you edited
with Easy-PhotoPrint EX.
Page top
> Which Side of the Displayed Image Does the Printing Start from?
Which Side of the Displayed Image Does the Printing Start

from?
As shown below, printing starts from the left side of the image displayed in the Layout/Print screen.
Outputs the paper in the direction as the arrow indicates.

See your printer manual for details on how to load paper (to print on the front/back, etc.).
Page top
> How Do I Print with Even Margins?

When you print on a bordered layout, the margins on the left and right or the top and bottom may become
wider than the other, depending on the image and printer.
To always print with even margins, select the Always crop images when selecting a layout with margins
checkbox on the Advanced tab of the Preferences dialog box.
Preferences... from the File menu.
(Settings) in the Layout/Print screen or select
Crop the photo to apply even margins individually.

Note
The following setting is available for Photo Print only.

Page top
> What Is "C1" or "C4"?

When an album is printed, labels such as "C1" and "C4" are printed as page numbers.
The "C1" and "C4" represent the front cover and back cover, respectively.
C1: Front cover
C2: Inside the front cover
C3: Inside the back cover

C4: Back cover
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings


Printing an Index

Saving Photos
Opening Saved Files

Changing Layout
Changing Background
Adding Photos
Replacing Photos
Cropping Photos
Framing Photos

Saving
Setting Holidays

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Vivid Photos

Select the Vivid Photo checkbox in the Select Paper screen to boost the colors in a photo before printing.
Important
This function is available only with a printer that supports Vivid Photo.
This function is not available when Enable ICC Profile is selected on the Advanced tab of the
Note
Even if you select the Vivid Photo checkbox, this effect applies only to the print result. The original
image or preview image will not be affected.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Reducing Photo Noise

When a photo is taken in a dark location such as night scene using digital camera, noise may appear in
the image.
Select the Photo Noise Reduction checkbox in the Select Paper screen to reduce noise in the image and
make the printed photos more vivid.
Important
This function is not available when Enable ICC Profile is selected on the Advanced tab of the
Note
When the noise is severe, change Normal to Strong.

The noise reduction effect applies only to the print result. The original image or preview image will
not be affected.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Cropping Photos (Photo Print)

Cropping a photo is the act of removing the unnecessary portions of the photo by selecting the
necessary portions.
Click
(Crop Image) in the Layout/Print screen.
Move the white frame to the portion to print and click OK.
Note
To move the cropping area, place the cursor within the white frame and drag it. Drag the white lines
to enlarge/reduce the cropping area.
Select the The Rule of Thirds checkbox to display white broken lines. To create a balanced
composition, drag any of the intersecting points (white squares) or white broken lines over the main
subject of the photo.
The cropping effect applies only to the print result. The original image will not be cropped.
See Help for details on the Crop window.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Dates on Photos (Photo Print)

To print the date the photo was taken on the photo, click
(Date Settings) in the Layout/Print screen,
then select the Print date checkbox in the Date Settings dialog box.
Note
The date is displayed in the short date format (mm/dd/yyyy, etc.) specified in your operating system.
In the Date Settings dialog box, you can change the orientation, position, size and color of the date
according to the orientation and background of the photo. See Help for details.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Multiple Photos on One Page

You can print multiple photos on one page by selecting a multiple-photo layout in the Layout/Print screen.
Note
See the following section for details on how to select photos.

Selecting a Photo
The available number of photos and layout may vary depending on the media type.
Photos are arranged in the following order.
Example: Borderless (x4)
You can change the printing order in Printing Order on the Print tab of the Preferences dialog box.
You can select the printing order from By Date, By Name and By Selection.

menu.
Page top
Printing an Index
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing an Index
Printing an Index
You can print an index of selected photos. An index print shows the thumbnails of the photos in one
page. It is convenient for managing your photos.
To print an index, select Index from the layouts in the Layout/Print screen.
Note

Selecting a Photo
Index print will be disabled if you select any of the following paper sizes.
- Credit Card
- Fine Art A4
- Fine Art A3
- Fine Art A3+
- Fine Art Letter
Up to 80 thumbnails can be printed on one page.

Example: Index (x20)
You can select the printing order from By Date, By Name, and By Selection.

menu.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing ID Photos (ID Photo Print)

You can print a variety of ID photos.
Important
The photo may not qualify as an official ID photo depending on its use.
For details, contact the party to whom you will be submitting the photo.
To print ID photos, select 4"x6" 10x15cm for Paper Size in the Select Paper screen, and select a layout of
the ID photo from the layouts in the Layout/Print screen.
Note

Selecting a Photo
Example: ID Photo 3.5x4.5cm
You can select the printing order from By Date, By Name, and By Selection.

menu.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Photo Information

Select Captured Info from the layouts in the Layout/Print screen to print the photo and the Exif information
side by side.
Note

Selecting a Photo
This function is available only on paper sizes Letter 8.5"x11" and A4.
Page top
Saving Photos
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Saving Photos
Saving Photos
You can save edited photos. The information of cropping and layout can be saved.
Click Save in the Layout/Print screen.
When the Save As dialog box appears, specify the save location and file name, then click Save.
Important
If you edit a saved file and save it again, the file will be overwritten.
To save a file again with a new name or to a different location, select Save As... from the File menu
and save.
Note
Save will not be displayed in the Select Images or Select Paper screen.
Page top
Opening Saved Files
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Opening Saved Files
Opening Saved Files

You can open files created with Easy-PhotoPrint EX.
1. Click Library from Menu.
The Open dialog box appears.

You can check files created and saved with Easy-PhotoPrint EX by icon view (only for Windows Vista)
or thumbnail view.
Important
When using 64bit Edition of Windows Vista or Windows XP, the contents of files cannot be
displayed on Explorer.
2. Select the file you want to open and click Open.

The Edit or Select Paper screen appears.
Note
Easy-PhotoPrint EX supports the following file formats (extensions).

- Easy-PhotoPrint EX Photo Print file (.el6)
- Easy-PhotoPrint EX Album file (.el1)
- Easy-PhotoPrint EX Stickers file (.el2)
- Easy-PhotoPrint EX Calendar file (.el4)
- Easy-PhotoPrint EX Layout file (.el5)
3. Edit the file if necessary.

Note
See the following sections for details on the editing procedures.

Editing Album
Editing Calendar
Editing Stickers
Editing Layout Print
Note
You can open files created with Easy-PhotoPrint EX with the following methods, besides from
Opening Saved Files
Library in Menu.
- Double-click or click the file.
- From the File menu, click Open..., then select the file you want to edit.
You can also open a recently used file by clicking the file name shown in the File menu.
Page top
Changing Layout
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Changing Layout
Changing Layout
You can change the layout of each page separately.
Select the page you want to change the layout of in the Edit screen, then click
(Change Layout).
Select the layout you want to use in the Change Layout dialog box and click OK.
Album
Important
The album layouts that can be selected may vary depending on the Paper Size, Orientation, or the
type of page selected (front cover, inside pages or back cover).
If the new layout has a different number of frames per page from the current layout, the following will
happen:
: Images will move from the subsequent pages to fill all the frames
If the number of layout
in the new layout.
frames is increased
: Pages with the new layout will be added until all the images on the
frames is decreased
pages with the current layout can be fitted.

If you change the selected layout for the front or back cover to one that has fewer layout frames, any
image that does not fit in the new layout will be deleted, starting with the last image that was added
to the former layout page.
Note
Select the Apply to all pages checkbox to change the layouts of all pages to the one you newly
selected.
Calendar
Changing Layout
Important
The layouts that can be selected may vary depending on the Paper Size and Orientation.
The layouts of all pages are changed to the selected layout.
All images that do not fit in the new layout will be collected on one page.
Layout Print
Important
The layouts that can be selected may vary depending on the Paper Size and Orientation.
If the new layout has a different number of frames per page from the current layout, the following will
happen:
: Images will move from the subsequent pages to fill all the frames
in the new layout.
frames is increased
frames is decreased
: Pages with the new layout will be added until all the images on the
pages with the current layout can be fitted.
Note
Select the Apply to all pages checkbox to change the layouts of all pages to the one you newly
selected.
Page top
Changing Background
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Changing Background
Changing Background
You can change the background of each page.
Important
You cannot change the background of the Photo Print, Stickers, and Layout Print.
Select the page you want to change the background of in the Edit screen, then click
Background).
(Change
Note
The screens for Album printing are used as examples in the following descriptions. The screens
may vary depending on what you create.
Select the type of background you want to use in the Change Background dialog box.
When Select from samples is Selected

Select the image you want to use from Samples and click OK.
Note
Select from samples will be displayed only if Album has been selected.
When Single color is Selected

Select the color you want to use from Standard color or Custom color and click OK.
Changing Background
When Image file is Selected

Set Image File Path and Image Layout, then click OK.
Changing Background
Note
See Help for details on how to set the background in the Change Background dialog box.
Page top
Adding Photos
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Adding Photos
Adding Photos
You can add images to pages.
Select the page you want to add photos in the Edit screen, then click
(Add Image).
Note
Select the folder containing the image you want to add from the folder tree area on the left of the Add
Image dialog box, and select the image you want to add from the thumbnail window on the right.
Note
Click an image to select it (background turns blue) or deselect it (background turns white). You can
also select multiple images.
Select an option for Add to and click OK.
Important
You can add up to 20 images at one time to a single page.

Up to 99 of the same images can be added to all pages combined.
You cannot add two or more of the same image at one time. In that case, add it one at a time.
If you increase the number of pages to add images, you cannot add images beyond page 400.
Note
In the Add Image dialog box, you can select all images at one time or change the display size and
order of the thumbnails. See Help for details.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Swapping Positions of Photos

You can swap the positions of images.
Click
(Swap Image Positions) in the Edit screen.
Note
Select the target and source images you want to swap, then click Swap.
When you finish swapping all images you want to swap, click Back to Edit.
Page top
Replacing Photos
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Replacing Photos
Replacing Photos
You can replace an image with another image.
Select the image you want to replace in the Edit screen, then click
(Replace Selected Image).
Select the folder containing the image you want to replace with from the folder tree area on the left of the
Replace Image dialog box.
Select the image you want to replace with from the thumbnail window on the right of the screen and click
OK.
If you want to select from the images already imported, click the Imported Images tab and select the
image you want to replace with from the thumbnail window and click OK.
Important
You cannot select multiple images in the Replace Image dialog box.
Note
If you select multiple images in the Edit screen and use the replacement function, all the images
selected in the Edit screen will be replaced with the image selected in the Replace Image dialog
box.
When images are replaced, the following settings of the old image are inherited to the new image.
- Position
- Size
- Frame
- Position and size of the date
The cropping information and image orientation are not inherited.
In the Replace Image dialog box, you can change the display size and order of the thumbnails. See
Help for details.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Changing Position, Angle and Size of Photos

You can adjust the position, angle and size of images.
Select the image of which you want to change the position or size in the Edit screen and click
Image) or double-click the image.
(Edit
Set the Center Position, Rotation and Size, then click OK.
Note
You can also change the position and size of an image by dragging it in the Edit screen.
(Free Rotate) and drag a corner of the image to
Select an image in the Edit screen, then click
rotate it.
See Help for details on the position and size of images.
Page top
Cropping Photos
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Cropping Photos
Cropping Photos
Cropping an image is the act of removing the unnecessary portions of the image by selecting the
necessary portions.
Select the image you want to crop in the Edit screen and click
(Edit Image) or double-click the
image.
Click the Crop tab in the Edit Image dialog box.
Drag the white squares on the image to change the area to be cropped and click OK.
Note
See Help for details on cropping.

Page top
Framing Photos
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Framing Photos
Framing Photos
You can add frames to images.
Important
You cannot add frames to images in Photo Print, Stickers, and Layout Print.
Select the image you want to frame in the Edit screen and click
image.
(Edit Image) or double-click the
Click the Frame tab in the Edit Image dialog box.
Select the frame you want to use from Frames and click OK.
Important
You cannot print dates on framed photos.

Note
Select the Apply to all images in the page checkbox to add the same frame to all the images on a
selected page at one time.
See Help for details on frames.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Printing Dates on Photos

You can print dates on images.
Select the image you want to print the date in the Edit screen and click
the image.
(Edit Image) or double-click
Click the Date tab in the Edit Image dialog box.
Select the Show date checkbox.

Set the Text Orientation, Position, Font Size and Color, then click OK.
Important
You cannot print dates on framed images.

Note
The date is displayed in the short date format (mm/dd/yyyy, etc.) specified in your operating system.
See Help for details on setting dates.
Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Attaching Comments to Photos

You can attach comments to images and display them in your album. The photo name, shooting date
and comments are displayed (from top to bottom) in a comment box.
Important
You cannot attach comments to Photo Print, Calendar, Stickers, and Layout Print.
Select the image you want to attach comments to in the Edit screen and click
double-click the image.
Click the Comments tab in the Edit Image dialog box.
Select the Show comment box checkbox.
Select the checkboxes of the items you want to display, and enter comments.
Set the size and color of font, and position, etc. of the comments, then click OK.
Note
See Help for details on comments.
(Edit Image) or

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Adding Text to Photos

You can add text to photos.
Click
(Add Text) in the Edit screen and drag the mouse over the area in which you want to add text.
Note
Select the Text tab in the Edit Text Box dialog box and enter text.
Note
In the Edit Text Box dialog box, you can change the position, angle and size of the text. You can also
set the color and line of the text box. See Help for details.
To change the entered text, select it and click
appears. You can change the text.
(Edit Text Box). The Edit Text Box dialog box
Page top
Saving
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Saving
Saving
You can save edited items.
Click Save in the Edit or Print Settings screen.
Note
When the Save As dialog box appears, specify the save location and file name, then click Save.
Important
If you edit a saved file and save it again, the file will be overwritten.
To save a file again with a new name or to a different location, select Save As... from the File menu
and save.
Note
Save will not be displayed in the Page Setup or Select Images screen.
Page top
Setting Holidays
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Setting Holidays
Setting Holidays
You can add holidays to your calendar.
Click Set Holidays... in the Page Setup screen of Calendar, or click

(Setup Period/Holiday) in the
Edit screen and click Set Holidays... in the Calendar General Settings dialog box to display the Holiday
Settings dialog box.
To add a holiday, click Add.... The Add/Edit Holiday dialog box appears. To edit a saved holiday, select it
and click Edit....
To delete a holiday, select it and click Delete. To delete all the saved holidays within your calendar
period, click Clear.
Enter the name in Holiday Name and specify the date.

Select the Set as Holiday checkbox to display that day as a holiday in your calendar.
Note
Setting Holidays
See Help for details on each dialog box.

Page top
Advanced Guide > Printing from a Computer > Printing with the Bundled Application Software > Appendix 1: EasyPhotoPrint EX Settings > Setting Calendar Display

You can customize the calendar display (fonts, lines, colors, position, size, etc.).
Click Settings... in the Page Setup screen of Calendar, or select a calendar in the Edit screen and click
(Setup Calendar) to display the Calendar Settings dialog box.

Important
The Position & Size tab is displayed only when the Calendar Settings dialog box is displayed from
the Edit screen.
Note
See Help for details on the Calendar Settings dialog box.

Page top
Advanced Guide > Printing from a Computer > Printing with Other Application Software

Page top
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods


Borderless Printing
Scaled Printing
Poster Printing
Booklet Printing
Duplex Printing


Page top
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >

The procedure for setting the basic print setup, which is necessary to print data properly with this
machine, is as follows:
1. Open the printer driver setup window

2. Select the media type
Select the type of paper loaded in the machine from the Media Type list on the Main tab.
3. Select the paper source

Select Automatically Select, Rear Tray, Cassette, Continuous Autofeed, or Paper Allocation from
Paper Source.
Important
The Paper Source settings that can be selected may differ depending on the paper type and
size.
4. Select the print quality

Select High, Standard, or Fast for Print Quality.
5. Select color/intensity
Select Auto for Color/Intensity.
6. Check the settings

Check the specified settings such as paper type and paper source displayed in the Settings Preview
on the left side of the window.
7. Complete the setup

Click OK.
When you execute print, the document will be printed in accordance with the type and size of the
media.
Page top

The paper size and orientation are essentially determined by the application. If the page size and
orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the
application, you do not need to select them on the Page Setup tab.
If you are not able to specify them with the application, the procedure for selecting a page size and
orientation is as follows:

2. Select the paper size
Select a page size from the Page Size list on the Page Setup tab.
3. Select Orientation
Select Portrait or Landscape for Orientation. Check Rotate 180 degrees check box if you want to
perform printing with the original being rotated 180 degrees.

Click OK.
The document will be printed with the selected page size and the orientation.
Page top

Default Setting
Print from Last Page
Collate
Print from Last Page + Collate
The procedure for specifying the number of copies and printing order is as follows:

2. Specify the number of copies to be printed
For Copies on the Page Setup tab, specify the number of copies to be printed.
3. Specify the print sequence

Check the Print from Last Page check box if you want to print from the last page in order. If you do
this, you do not need to sort pages into their correct order after printing.
4. Set up collated printing when you specify multiple copies in the Copies box
Check the Collate check box if you are specifying multiple copy together.
Uncheck this check box to print all pages with the same page number together.

Click OK.
The specified number of copies will be printed with the specified printing order.
Important
If your application has the same function, make the settings with the application. If you specify the
number of copies and the printing order with both the application and this printer driver, the number
of copies may be multiplied numbers of the two settings or the specified printing order may not be
enabled.
Print from Last Page and Collate appear grayed out and are unavailable if Booklet Printing is
selected for Page Layout.
Print from Last Page appears grayed out and is unavailable if Poster Printing is selected for Page
Layout.
Note
By setting both Print from Last Page and Collate, you can perform printing so that papers are
collated one by one starting from the last page.
These settings can be used in combination with Borderless Printing, Normal-size Printing, Fit-toPage Printing, Scaled Printing, Page Layout Printing, and Duplex Printing.
Page top
The procedure for setting the stapling direction and the width of the stapling margin is as follows:

2. Specify the side to be stapled
Check the position of the stapling margin from Staple Side on the Page Setup tab.
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best
staple position. If you want to change the setting, select from the list.
3. Set the margin width

If necessary, click Specify Margin... and set the width of the stapling margin, and then click OK.

Click OK on the Page Setup tab.
When you execute print, the data is printed with the specified staple side and margin.
Important
Staple Side and Specify Margin... appear grayed out and are unavailable when:
Poster Printing or Booklet Printing is selected for Page Layout.

Scaled Printing is selected for Page Layout (If Duplex Printing is also selected, only Staple Side is
selectable).
Borderless Printing check box is checked (If Duplex Printing is also selected, only Staple Side is
selectable).
Page top
Borderless Printing
Borderless Printing
Borderless Printing
The borderless printing function allows you to print data without any margin by enlarging the data so that
it extends slightly off the paper. Without the borderless printing function, a margin is provided around the
printed data. If you want to print data such as a photo without providing any margin around it, select
Borderless Printing.
The procedure for performing borderless printing is as follows:
Setting Borderless Printing

2. Set borderless printing
Check the Borderless Printing check box on the Page Setup tab.
Click OK when the confirmation message appears.

When a message prompting you to change the media type appears, select a media type from the
list and click OK.
3. Check the paper size

Check the Page Size list. If you want to change, select another page size from the list. The list
displays only sizes that can be used for borderless printing.
4. Adjust the amount of extension from the paper

Adjust the amount of extension using the Amount of Extension slider as necessary.
Moving the slider to the right makes the amount larger and moving the slider to the left makes the
amount smaller.
Borderless Printing
It is recommended to set the slider at the second position from the right for most cases.
Important
If you set the slider at the rightmost position, the back side of the paper may become smudged.

Click OK.
The data will be printed without any margins on the paper.
Important
If a page size that cannot be used for borderless printing is selected, the size is automatically
changed to the valid page sizes for borderless printing.
When High Resolution Paper, T-Shirt Transfers, or Envelope is selected from the Media Type list on
the Main tab, you cannot perform borderless printing.
When Borderless Printing is checked, the Printer Paper Size, Page Layout, Staple Side (when
Duplex Printing is not selected) settings, and the Stamp/Background... button on the Page Setup tab
appear grayed out and are unavailable.
Print quality may deteriorate or the sheet may be stained at the top and bottom depending on the
type of the media used.
When the ratio of the height to the width differs greatly from the image data, a portion of the image
may not be printed depending on the size of the media used.
In this case, crop the image data with an application software according to the paper size.
Note
When Plain Paper is selected for Media Type on the Main tab, borderless printing is not
recommended, and therefore the dialog box for media selection appears.
If you are using plain paper for test printing, select Plain Paper, and click OK.
Expanding the range of the document to print

Specifying a large amount of extension allows you to perform borderless printing with no problems.
However, the portion of the document that extends off the paper range will not be printed. Subjects
around the perimeter of a photo may not be printed.
Try borderless printing once. If you are not satisfied with the result of borderless printing, reduce the
amount of extension. The extension amount becomes shorter as the Amount of Extension slider is
moved to the left.
Important
If the Amount of Extension is shortened, an unexpected margin may be produced on the print,
depending on the size of the paper.
Note
If Preview before printing is checked on the Main tab, you can confirm before printing whether there
will be no border.
Page top
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods > Fitto-Page Printing
The procedure for printing document, which is enlarged or reduced to fit to the page size, is as follows:

2. Set fit-to-page printing
Select Fit-to-Page Printing from the Page Layout list on the Page Setup tab.
3. Select the paper size for the data

Using Page Size, select the page size that was set with your application.
4. Select the print paper size

Select the size of the paper loaded in the machine from the Printer Paper Size list.
If the printer paper size is smaller than the Page Size, the page image will be reduced. If the printer
paper size is larger than the page size, the page image will be enlarged.
The current settings are displayed in the Settings Preview on the left side of the printer driver.

Click OK.
When you execute print, the document will be enlarged or reduced to fit to the page size.
Important
When Borderless Printing check box is checked, Fit-to-Page Printing cannot be selected.
Page top
Scaled Printing
Scaled Printing
Scaled Printing
The procedure for printing a document with pages enlarged or reduced is as follows:

2. Set scaled printing
Select Scaled Printing from the Page Layout list on the Page Setup tab.
3. Select the paper size for the data

Using Page Size, select the page size that was set with your application.
4. Set the scaling rate by using one of the following methods:

Select a Printer Paper Size
Select a printer paper size, which is different from the Page Size, from the Printer Paper Size list.
If the printer paper size is smaller than the Page Size, the page image will be reduced. If the
printer paper size is larger than the page size, the page image will be enlarged.
Scaled Printing
Specify a scaling factor
Directly type in a value into the Scaling box.

Click OK.
When you execute print, the document will be printed with the specified scale.
Important
If the application software with which you created the original has the scaled printing function,
configure the settings on your application software. You do not need to also configure the same
setting in the printer driver.
When Scaled Printing is selected, the Staple Side list box appears grayed out and is unavailable
(when Duplex Printing is not selected).
When Borderless Printing check box is checked, Scaled Printing cannot be selected.
Note
Selecting Scaled Printing changes the printable area.

Page top

The page layout printing function allows you to print more than one page image on a single sheet of
paper.
The procedure for performing page layout printing is as follows:

2. Set page layout printing
Select Page Layout Printing from the Page Layout list on the Page Setup tab.

Now you have finished setting the layout of the document from left to right.
4. Set the number of pages to be printed on one sheet and the page sequence
If necessary, click Specify..., specify the following settings in the Page Layout Printing dialog box, and
click OK.
Pages
To increase the number of pages to be included on a single sheet of paper, select a desired
number of pages from the list.
Page Order
To change the page arrangement order, select an icon from the list to change the page placement
order.
Page Border
To print a page border around each document page, check this check box.

When you execute print, the specified number of pages will be arranged on each sheet of paper in
the specified order.
Important
When Borderless Printing check box is checked, Page Layout Printing cannot be selected.
Page top
Poster Printing
Poster Printing
Poster Printing
The poster printing function allows you to enlarge image data, divide it into several pages, and print
these pages on separate sheets of paper. When the pages are pasted together, they form a large print
like a poster.
The procedure for performing poster printing is as follows:
Setting Poster Printing

2. Set poster printing
Select Poster Printing from the Page Layout list on the Page Setup tab.

Now you have finished setting 2 by 2-page poster printing.
4. Set the number of image divisions and the pages to be printed.

If necessary, click Specify..., specify the following settings in the Poster Printing dialog box, and then
click OK.
Poster Printing
Image Divisions
Select the number of divisions (vertical x horizontal) from the Image Divisions list. As the number of
divisions increases, the number of sheets used for printing increases, allowing you to create a
larger poster.
Print "Cut/Paste" in margins
To leave out words "Cut" and "Paste", uncheck this check box.
Important
This feature is unavailable when the 64-bit printer driver is used.

Print "Cut/Paste" lines in margins
To leave out cut lines, uncheck this check box.
Pages
To reprint only specific pages, enter the page number you want to print. To print multiple pages,
specify by separating the pages with commas or entering a hyphen between the page numbers.
Note
You can also specify the print range by clicking the pages in the setup preview.

When you execute print, the document will be divided into several pages during printing.
After all poster pages have been printed, paste the pages together to create a poster.
Printing Only Specific Pages

If ink becomes faint or runs out during printing, you can print the pages you still need, by following the
procedure below:
1. Set the print range

In the Settings Preview on the left of the Page Setup tab, click the pages that do not need to be
printed.
The pages that were clicked are deleted, and only the pages to be printed are displayed.
Poster Printing
Note
Click the deleted pages to display them again.

Right-click the Settings Preview to select Print all pages or Delete all pages.

After completing the page selection, click OK.
When you execute print, only specified pages will be printed.
Important
When Poster Printing is selected, the Duplex Printing and Print from Last Page check boxes and the
Staple Side list box appear grayed out and are unavailable.
When Borderless Printing check box is checked, Poster Printing cannot be selected.
Since poster printing enlarges the document when printing it, the print results may become coarse.
Page top
Booklet Printing
Booklet Printing
Booklet Printing
The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the
paper. This type of printing ensures that pages can be collated properly, in page number order, when the
printed sheets are folded and stapled at the center.
The procedure for performing booklet printing is as follows:

2. Set booklet printing
Select Booklet Printing from the Page Layout list on the Page Setup tab.
The current settings are displayed in the Settings Preview on the left side of the window.

4. Set the margin for stapling and the margin width

Click Specify..., specify the following settings in the Booklet Printing dialog box, and then click OK.
Margin for stapling
Select which side the stapling margin should be on when the booklet is completed.
Booklet Printing
Insert blank page

To leave one side of a sheet blank, check Insert blank page check box, and select the page to be left
blank.
Margin
Enter the margin width. The specified width from the center of the sheet becomes the margin for one
page.
Page Border
To print a page border around each document page, check the Page Border check box.

When you execute print, the document will be printed on one side of a sheet of paper. When the
printing of one side is complete, set the paper correctly by following the message and click OK.
When the printing of the other side is complete, fold the paper at the center of the margin and make
a booklet.
Important
Booklet Printing is unavailable when:

A media type other than Plain Paper is selected from the Media Type list.
Borderless Printing check box is checked.
When Booklet Printing is selected, Duplex Printing, Staple Side, Print from Last Page, and Collate
Note
The stamp and background are not printed on blank sheets inserted with the Insert blank page
function of Booklet Printing.
Page top
Duplex Printing
Duplex Printing
Duplex Printing
The procedure for printing data on both sides of a sheet of paper is as follows:

2. Set duplex printing
Check the Duplex Printing check box on the Page Setup tab.
3. Select the layout

Select Normal-size Printing (or Fit-to-Page Printing, Scaled Printing, or Page Layout Printing) from
the Page Layout list.
4. Specify the side to be stapled

The printer analyzes the Orientation and Page Layout settings, and automatically selects the best
Staple Side. If you want to change the setting, select another value from the list.
5. Set the margin width

If necessary, click Specify Margin... and set the width of the stapling margin, and then click OK.

When you execute print, the document will be printed on one side of a sheet of paper. When the
printing of one side is complete, set the paper correctly by following the message and click OK. The
document will be printed on the opposite side.
Important
Duplex Printing
Duplex Printing is unavailable when:

A media type other than Plain Paper is selected from the Media Type list.
Poster Printing is selected from the Page Layout list.
When Booklet Printing is selected from the Page Layout list, Duplex Printing and Staple Side
Note
If the Media Type dialog box appears when performing borderless printing during duplex printing,
select Plain Paper.
If the back side of the paper becomes smudged during duplex printing, perform Bottom Plate
Cleaning in the Maintenance tab.
Page top
The Stamp function allows you to print a stamp text or a bitmap over or behind document data. The
Background function allows you to print a light illustration behind the document data.
The procedure for performing stamp/background printing is as follows:
Printing a stamp
"CONFIDENTIAL," "IMPORTANT," and other stamps that are used often in companies are pre-registered.

2. Click Stamp/Background... on the Page Setup tab
The Stamp/Background dialog box opens.
3. Select a stamp
Check the Stamp check box, and select a desired stamp from the list.
The current settings are displayed in the Settings Preview on the left side of the Page Setup tab.
4. Set the stamp details

If necessary, complete the following settings, and then click OK.
Place stamp over text
To print the stamp on the front of the document, check this check box.
Note
The stamp is given priority because the stamp is printed over the document data in the
sections where the stamp and the document data overlap. If the Place stamp over text check
box is unchecked, the stamp is printed behind the document data and may be hidden in the
overlapping sections depending on the application used.
Stamp first page only
To print the stamp only on the first page, check this check box.
Define Stamp... button
To change the stamp text, bitmap, or position, click this (refer to Saving a Stamp Setting).

When you execute print, the data is printed with the specified stamp.
Printing a background
1. Select the background for which the settings are to be changed

Two bitmap files are pre-registered as samples.

3. Select the background

Check the Background check box, and select a desired background from the list.
The current settings are displayed in the Settings Preview on the left side of the Page Setup tab.
4. Set the background details

If necessary, complete the following settings, and then click OK.
Background first page only
To print the background only on the first page, check this check box.
Select Background... button
To use another bitmap file or change the layout or density of a background, click this (refer to Saving
Image Data to be Used as a Background ).

When you execute print, the data is printed with the specified background.
Important
When the Borderless Printing check box is checked, the Stamp/Background... button appears
grayed out and is unavailable.
Note
The stamp and background are not printed on blank sheets inserted with the Insert blank page
function of Booklet Printing.
Related Topics
Page top
Stamp/Background Printing > Saving a Stamp Setting

You can create and save a new stamp. You can also change and register some of the settings of an
existing stamp. Unnecessary stamps can be deleted at any time.
The procedure for registering a new stamp is as follows:
Registering a new stamp

3. Click Define Stamp...

The Stamp Settings dialog box opens.
4. Configure the stamp while viewing the preview window

Stamp tab
Select Text or Bitmap with Stamp Type.
When registering a text, the characters must already be entered in Stamp Text. Change the True
Type Font, Style, Size, and Outline settings, as necessary. You can select the color of the stamp
by clicking Select Color....
For Bitmap, click Select File... and select the bitmap file (.bmp) to be used. Change the settings
of the Size and Transparent white area if necessary.
Placement tab
Select the stamp position from the Position list. You can also select Custom from the Position
list and specify coordinates for X-Position and Y-Position.
You can also change the stamp position by dragging the stamp in the preview window.
To change the stamp position angle, type a value in the Orientation box directly.
5. Save the stamp

Click the Save settings tab and enter a new stamp title in the Title box, and then click Save.

Click OK. The Stamp/Background dialog box opens again.
The registered title appears in the Stamp list.
Changing and registering some of stamp settings
1. Select the stamp for which the settings are to be changed

Check the Stamp check box in the Stamp/Background dialog box, and then select the title of the
stamp to be changed from the Stamp list.
2. Click Define Stamp...

3. Configure the stamp while viewing the preview window

4. Save the stamp
Click Save overwrite on the Save settings tab.
If you want to save the stamp with a different title, type a new title in the Title box and click Save.

The registered title appears in the Stamp list.
Deleting an unnecessary stamp
1. Click Define Stamp... in the Stamp/Background dialog box

2. Select the stamp to be deleted

Select the title of the stamp you want to delete from the Stamps list on the Save settings tab. Then
click Delete.

Page top
Stamp/Background Printing > Saving Image Data to be Used as a Background

You can select a bitmap file and save it as a new background. You can also change and register some
of the settings of an existing background. An unnecessary background can be deleted at any time.
The procedure for registering image data to be used as a background is as follows:
Registering image data to be used as a background

3. Click Select Background...

The Background Settings dialog box opens.
4. Select the image data to be registered to the background

Click Select File.... Select the target image data (bitmap file), and then click Open.
5. Specify the following settings while viewing the preview window

Layout Method
Select how the background image data is to be placed.
When Custom is selected, you can set coordinates for X-Position and Y-Position.
You can also change the background position by dragging the image in the preview window.
Intensity
Set the intensity of the background image data with the Intensity slider. To lighten the background,
move the slider to the left. To darken the background, move the slider to the right. To print the
background at the original bitmap intensity, move the slider to the rightmost position.
6. Save the background

Click the Save settings tab and enter a new stamp title in the Title box, and then click Save.

The registered title appears in the Background list.
Changing and saving some background settings
1. Select the background for which the settings are to be changed

Check the Background check box in the Stamp/Background dialog box, and then select the title of
the background you want to change from the Background list.
2. Click Select Background...

3. While viewing the preview, set the items on the Background tab
4. Save the background
Click Save overwrite on the Save settings tab. If you want to save the background with a different title,
type a new title in the Title box and click Save.

The registered title appears in the Background list.
Deleting an unnecessary background
1. Click Select Background... in the Stamp/Background dialog box

2. Select the background to be deleted

Select the title of the background you want to delete from the Backgrounds list on the Save settings
tab, and then click Delete.

Page top
For details on how to load an envelope into the machine, refer to the "Loading Envelopes" in the manual:
Basic Guide.
The procedure for performing envelope printing is as follows:
1. Load an envelop into the machine

Fold down the envelope flap.
Orient the envelope so that the flap is on the left and the folded surface is facing down.

Select Envelope from the Media Type list on the Main tab.

Click the Page Setup tab, and select Youkei 4, Youkei 6, Comm.Env. #10, or DL Env. for Page Size.
5. Select the landscape for orientation

To print the addressee horizontally, select Landscape for Orientation.

Click OK.
When you execute print, the information is printed on the envelope.
Page top

In this machine, there are two paper sources, a rear tray and a cassette.
You can facilitate printing by selecting a paper source setting that matches your print conditions or
purpose.
The procedure for setting paper source is as follows:

2. Select the paper source
From the Paper Source list on the Main tab, select the paper source that matches your purpose.
Automatically Select
Plain paper whose Page Size is Letter 8.5"x11", A5, A4, or B5 is fed from the cassette. Other sizes of
plain paper and paper types other than plain paper are fed from the rear tray.
Rear Tray
Paper is always fed from the rear tray.
Cassette
Paper is always fed from the cassette.
Important
Plain paper that is not Letter 8.5"x11", A5, A4, or B5 and paper types other than plain paper
cannot be fed from the cassette.
Continuous Autofeed
If plain paper runs out in the specified paper source, the printer automatically switches the paper
source.
When printing a large volume of data, load plain paper of the same size in both paper sources. You
can therefore reduce the trouble of having to load paper because the printer automatically switches
the paper source when paper runs out in one paper source.
Important
Continuous Autofeed is unavailable when paper other than Plain Paper is selected for Media
Type.
Since the printer feeds paper from the paper source that was being used the last time
Continuous Autofeed was selected and printing ended, load the same paper in both the rear
tray and the cassette.
Paper Allocation
If the media type for the print data is plain paper and the paper size matches the paper allocation
setting, the printer automatically feeds paper from the cassette. If not, the printer feeds paper from
the rear tray.
To change the paper allocation settings, click Paper Allocation..., specify the Paper Size to be loaded
in the cassette, and then click OK.
If you load frequently used plain paper in the cassette, the printer feeds paper from the rear tray
when the print data uses a different type of paper. You can therefore reduce the trouble of having to
load different paper.

Click OK.
When you execute print, the printer uses the specified paper source to print the data.
Page top

You can display and check the print result before printing.
The procedure for displaying the print result before printing is as follows:

2. Set the preview
Check the Preview before printing check box on the Main tab.

Click OK.
The Canon IJ Preview will start and the print result will be displayed before printing.
Related Topic
Canon IJ Preview
Page top

You can specify the height and width of paper if its size cannot be selected in Page Size. Such a paper
size is called a custom size.
The procedure for specifying a custom size is as follows:
1. Set the custom size in the application software

On your application's paper size feature, specify your custom size.
Important
If the application software that created the document has a function for specifying the height
and width values, use the application software to set the values. If the application software
does not have such a function or if the document does not print correctly, use the printer driver
to set the values.

Select Custom... for Page Size on the Page Setup tab.
The Custom Paper Size dialog box opens.
4. Set the custom size in the application software

Specify Units, and enter the Width and Height of the paper to be used. Then click OK.

When you execute print, the data is printed with the specified paper size.

Page top
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Changing the Print Quality and
Correcting Image Data

Selecting a Combination of the Print Quality Level and a Halftoning Method


Adjusting Intensity
Adjusting Contrast

Page top
Correcting Image Data > Selecting a Combination of the Print Quality Level and a Halftoning Method
Selecting a Combination of the Print Quality Level and a

Halftoning Method
You can set the print quality level and the halftoning method.
The procedure for setting the print quality level and the halftoning method is as follows:

Select Custom for Print Quality on the Main tab, and click Set....
The Custom dialog box opens.
3. Setting the print quality and halftone expression method

Move the Quality slider to select the quality level.
Select Halftoning and click OK.
Note
Halftones refer to color shades between the darkest color and the brightest color.
The printer replaces the color shades with a collection of small dots to express the halftones.
Dither arranges the dots according to fixed rules to express the halftones. Diffusion places the
dots randomly to express the halftones. When you select Auto, the data is printed with the
optimal halftoning method for the selected print quality.

Click OK on the Main tab.
When you execute print, the data is printed with the specified quality level and halftoning method.
Important
Certain print quality levels and halftoning methods cannot be selected depending on the settings of
Media Type.
Note
When the part of the object is not printed, selecting Diffusion for Halftoning may solve the problem.
Related Topics
Adjusting Intensity
Adjusting Contrast
Page top
Correcting Image Data > Printing a Color Document in Monochrome
The procedure for printing a color document in monochrome is as follows:

2. Set grayscale printing
Check the Grayscale Printing check box on the Main tab.

Click OK.
When you execute print, the document is converted to grayscale data. It allows you to print the color
document in monochrome.
Important
When the Grayscale Printing check box is checked, the printer driver processes image data as
sRGB data. In this case, actual colors printed may differ from those in the original image data.
When using the grayscale printing function to print Adobe RGB data, convert the data to sRGB data
using an application software.
Note
During Grayscale Printing, color inks may be used as well as black ink.
Page top
Correcting Image Data > Specifying Color Correction

You can specify the color correction method suited to the type of document to be printed.
Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed
with color tints that most people prefer. This method is suitable for printing sRGB data.
If you want to print by using the color space of sRGB or Adobe RGB data effectively, select ICM. If you
want to use an application software to specify an ICC profile, select None.
The procedure for specifying color correction is as follows:

2. Select the manual color adjustment
On the Main tab, select Manual for Color/Intensity, and click Set....
The Manual Color Adjustment dialog box opens.
3. Select color correction

Click Matching tab, select Color Correction setting suited to your purpose from the following, and
click OK.
Driver Matching
By using Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer.
Driver Matching is the default setting for Color Correction.
ICM
You can print by using the color space of sRGB or Adobe RGB data effectively.
None
The printer driver does not perform color adjustment. Select this value if you are specifying an
individually created profile or a profile for special Canon paper in an application software to print
data.

When you execute print, the data is printed with the specified color adjustment method.
Important
If ICM is disabled in the application software, ICM is unavailable for Color Correction and the printer
may not be able to print the image data properly.
When the Grayscale Printing check box on the Main tab is checked, Color Correction appears
Related Topics
Page top
Correcting Image Data > Specifying Color Correction > Optimal Photo Printing of Image Data

When people print images taken with digital cameras, they sometimes feel that the printed color tones
differ from those of actual image or those displayed on the monitor.
To get the print results as close as possible to the desired color tones, you must select a printing
method that is best suited to the application software used or to your purpose.
Color Management
Devices such as digital cameras, scanners, monitors, and printers handle color differently. Color
management (color matching) is a method that manages device-dependent "colors" as a common color
space. For Windows, a color management system called "ICM" is built into the operating system.
sRGB and Adobe RGB are popularly used as common color spaces. Adobe RGB has a wider color
space than sRGB.
ICC profiles convert device-dependent "colors" into a common color space.
By using an ICC profile and carrying out color management, you can draw out the color space of the
image data within the color reproduction area that the printer can express.
Selecting a printing method suited to the image data

The recommended printing method depends on the color space (Adobe RGB or sRGB) of the image
data or the application software to be used. There are two typical printing methods. Check the color
space (Adobe RGB or sRGB) of the image data and the application software to be used, and then select
the printing method suited to your purpose.
To print using Canon Digital Photo Color
Target data: sRGB data

Printing method: Adjusting Colors with the Printer Driver
To print using the color space of the data effectively
Target data: Adobe RGB data or sRGB data

Application software: An ICC profile can or cannot be specified.
Printing method: Printing with ICC Profiles
Page top
Correcting Image Data > Specifying Color Correction > Adjusting Colors with the Printer Driver

You can specify the color correction function of the printer driver to print sRGB data with color tints that
most people prefer (through the use of Canon Digital Photo Color).
The procedure for adjusting colors with the printer driver is as follows:



Select Manual for Color/Intensity, and click Set....

Click Matching tab, and select Driver Matching for Color Correction.
6. Set the other items

If necessary, click Color Adjustment tab, and adjust the color balance of Cyan, Magenta, Yellow, and
adjust Brightness, Intensity, and Contrast settings, and then click OK.

When you execute print, the printer driver adjusts the colors when printing the data.
Related Topics
Adjusting Intensity
Adjusting Contrast
Page top
Correcting Image Data > Specifying Color Correction > Printing with ICC Profiles

If the image data has a specified ICC profile, you can effectively use the color space (Adobe RGB or
sRGB) of the data when printing.
The printer driver setting procedure varies depending on the application software used to print.
Printing image data from the application software that can specify an ICC profile
When using Adobe Photoshop, Canon Digital Photo Professional, or any other application software that
allows you to specify an ICC profile, you can use the color management system (ICM) found in Windows
when printing the data. You can print the editing and touch-up results of an application software by
effectively using the color space of the ICC profile specified in the image data.
To use this printing method, you must first use an application software to specify an ICC profile in the
image data. For instructions on specifying an ICC profile with an application software program, refer to
the manual of the application software you are using.




Click Matching tab, and select ICM for Color Correction.


When you execute print, the printer uses the color space of the image data.
Important
If you print an image by specifying an individually created profile or a profile for special Canon paper
in an application software, select None from the Color Correction menu of the printer driver.
Printing image data from the application software that cannot specify an ICC profile
When printing from an application software that does not allow you to specify an ICC profile, specify the
ICC profile in the print settings of the printer driver and print the data. When printing Adobe RGB data, you
can print the data with the Adobe RGB color space even if the application software does not support
Adobe RGB.



Manual Color Adjustment dialog box opens.

Click Matching tab, and select ICM for Color Correction.
6. Select the input profile

Select an Input Profile that matches the color space of the image data.
For sRGB data or data without an ICC profile:
Select Standard.
For Adobe RGB data:
Select Adobe RGB (1998).

Important
If the application software specifies an input profile, the input profile setting of the printer driver
becomes invalid.
If no ICC profiles are installed on your computer, Adobe RGB (1998) is not displayed. You can
install ICC profiles from the Setup CD-ROM that accompanies the machine.


When you execute print, the data is printed with the color space of the selected image data.
Related Topics
Adjusting Intensity
Adjusting Contrast
Page top
Correcting Image Data > Adjusting Color Balance

You can adjust the color tints during printing.
Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes
the total color balance of the document. Use the application software if you want to change the color
balance significantly. Use the printer driver only if you want to adjust the color balance slightly.
The following sample shows the case when Color Balance is used to intensify cyan and to diminish
yellow so that the overall colors are more uniform.
No adjustment
Adjusted in Color Balance
The procedure for adjusting color balance is as follows:

3. Adjust color balance

There are individual sliders for Cyan, Magenta, and Yellow. Each color becomes stronger when the
corresponding slider is moved to the right, and becomes weaker when the corresponding slider is
moved to the left. For example, if cyan becomes weaker, the color red becomes stronger.
You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50.
After adjusting each color, click OK.

When you execute print, the document is printed with the adjusted color balance.
Important
When the Grayscale Printing check box on the Main tab is checked, Cyan, Magenta, and Yellow
Related Topics
Adjusting Intensity
Adjusting Contrast
Page top
Correcting Image Data > Adjusting Brightness
You can change the brightness of the overall image data during printing.
This function does not change pure white or pure black but it changes the brightness of the intermediate
colors.
The following sample shows the print result when the Brightness specification is changed.
Light is selected
Normal is selected
Dark is selected
The procedure for adjusting brightness is as follows:

3. Specify the brightness

Select Light, Normal, or Dark for Brightness, and click OK.

When you execute print, the data is printed at the specified brightness.
Related Topics

Adjusting Intensity
Adjusting Contrast
Page top
Adjusting Intensity
Correcting Image Data > Adjusting Intensity
Adjusting Intensity
You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing.
If you want to sharpen the print results, you should intensify the colors.
The following sample shows the case when the intensity is increased so that all colors become more
intense when the image data is printed.
No adjustment
Higher Intensity
The procedure for adjusting intensity is as follows:

Select Manual for Color/Intensity on the Main tab, and click Set....
3. Adjust intensity
Moving the Intensity slider to the right intensifies (darkens) the colors. Moving the slider to the left
dilutes (brightens) the colors.
Adjusting Intensity
Important
Adjust the slider gradually.

When you execute print, the image data is printed with the adjusted intensity.
Related Topics
Adjusting Contrast
Page top
Adjusting Contrast
Correcting Image Data > Adjusting Contrast
Adjusting Contrast
You can adjust the image contrast during printing.
To make the differences between the light and dark portions of images greater and more distinct,
increase the contrast. On the other hand, to make the differences between the light and dark portions of
images smaller and less distinct, reduce the contrast.
No adjustment
Adjust the contrast
The procedure for adjusting contrast is as follows:

3. Adjust the contrast

Moving the Contrast slider to the right increases the contrast, and moving it to the left decreases the
contrast.
Adjusting Contrast

When you execute print, the image is printed with the adjusted contrast.
Related Topics
Adjusting Intensity
Page top
Correcting Image Data > Simulating an Illustration
With the Simulate Illustration function, you can print full-color or 256-color image data so that it looks like
a hand-drawn illustration. You can add different effects to the original profile and colors.
The procedure for performing Simulate Illustration is as follows:

2. Set the Simulate Illustration
Check the Simulate Illustration check box on the Effects tab, and adjust the Contrast as necessary.
Moving the slider to the right lightens the image data and moving the slider to the left darkens the
image data.

Click OK.
When you execute print, the image will be printed so that it looks hand-drawn.
Page top
Correcting Image Data > Representing Image Data with a Single Color

With the Monochrome Effects function, you can benefit from coloring effects such as changing a
photograph to a sepia tone image.
The procedure for performing Monochrome Effects is as follows:

2. Set Monochrome Effects
Check the Monochrome Effects check box on the Effects tab and select your desired color.
If you use Select Color, move the Color slider to specify the color you want.

Click OK.
When you execute print, the image will be printed with a single color.
Important
When the Grayscale Printing check box on the Main tab is checked, Monochrome Effects appears
Page top
Correcting Image Data > Presenting Image Data with Vivid Colors

The Vivid Photo function allows you to print image data with vivid colors.
The notable feature of Vivid Photo is that it emphasizes the colors in background sceneries while
maintaining the human skin color natural. By using this function, you can make vivid hues appear even
more vivid.
The procedure for performing Vivid Photo is as follows:

2. Set Vivid Photo
Check the Vivid Photo check box on the Effects tab.

Click OK.
When you execute print, the image will be printed with vivid colors.
Page top
Correcting Image Data > Smoothing Jagged Outlines

The Image Optimizer function allows you to smooth jagged outlines in photos and graphics that have
been enlarged with your application. This feature is especially useful when printing low-resolution
images from Web pages.
The procedure for performing Image Optimizer is as follows:

2. Perform Image Optimizer
Check the Image Optimizer check box on the Effects tab.

Click OK.
The photos and graphics will be printed with jagged outlines smoothed.
Note
Depending on application software or resolution of image data, the Image Optimizer may have no
discernible effects.
It may take longer to complete printing if the Image Optimizer is used.
Page top
Correcting Image Data > Changing Color Properties to Improve Coloration

The Photo Optimizer PRO function corrects colors of digital camera images or scanned images. It is
specially designed to compensate for color shift, overexposure, and underexposure.
The procedure for performing Photo Optimizer PRO is as follows:

2. Set the Auto Photo mode
Check the Photo Optimizer PRO check box on the Effects tab.
Normally there is no need to check the Apply Throughout Page check box.
Images within each page are optimized on an image-by-image basis.
Note
Check the Apply Throughout Page check box when printing image data that has been
processed, such as being cropped or rotated. In this case the entire page will be treated as a
single image to be optimized.

Click OK.
When you execute print, the images will be printed with color compensation.
Important
Photo Optimizer PRO does not function when:

Background is set in the Stamp/Background dialog box on the Page Setup tab.
Define Stamp... is selected in the Stamp/Background dialog box on the Page Setup tab, and the
bitmapped stamp is configured.
Note
Depending on images, the Photo Optimizer PRO may have no discernible effect.
Page top
Correcting Image Data > Reducing Photo Noise

With the Photo Noise Reduction function, you can reduce the digital camera noise and improve the
image quality of the digital print.
The procedure for performing Photo Noise Reduction is as follows:

2. Set Photo Noise Reduction
Check the Photo Noise Reduction check box on the Effects tab and select Normal or Strong for the
level.

Click OK.
When you execute print, the image will be printed with the digital camera noise being reduced.
Note
It is recommended to select Normal for most cases. Select Strong if you have selected Normal and
the noise still bothers you.
Depending on application software or resolution of image data, effects of digital camera noise
reduction may not be obvious.
When this function is used for other than photos taken by digital cameras, image may be distorted.
Page top
Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver
> Overview of the Printer Driver

Maintenance Tab

Page top
> Canon IJ Printer Driver

The Canon IJ printer driver is software that is installed on your computer for printing data on this
machine.
The Canon IJ printer driver converts the print data created by your Windows application into data that your
printer can understand and sends the converted data to the printer.
Because the format of print data varies depending on the your model, you need to have a Canon IJ
printer driver for the specific model you are using.
How to Use Help

You can display the Help describing the driver setting items through the Printing Preferences screen of
the Canon IJ printer driver.
To view all descriptions of a tab...
Click the Help button on each tab.

A description for each item on the tab appears.
You can also display a description for a dialog box by clicking the link that appears on the
corresponding tab.
To see a description for each item...
Right-click the item you want to learn about and then click Help.
Alternatively, if the
[Help] button is found at the right end of the title bar, click that button, and
then click the item you want to learn about.
A description of the item is displayed.
Related Topic
Page top
> Canon IJ Printer Driver > How to Open the Printer Driver Setup Window

The printer driver setup window can be displayed through the application software in use or the Start
menu of the Windows.
Note
This guide mainly describes operations on the Windows Vista. Operations may differ depending on
versions of the Windows.
Open the Printer Driver Setup Window through the Application Software
Follow the procedure below to configure print settings when printing.
1. Select the command you perform printing on the application software in use
In general, select Print on the File menu to open the Print dialog box.
2. Select your model name and click Preferences (or Properties)

The printer driver setup window appears.
Note
Depending on application software you use, command names or menu names may vary and
there may be more steps. For details, refer to the user's manual of your application software.
Open the Printer Driver Setup Window through the Start Menu
Follow the procedure below to perform maintenance operations such as print head cleaning, or to
configure print settings that are common for all application software.
1. Select items from the Start menu as shown below:

In Windows Vista, select the Start menu -> Control Panel -> Hardware and Sound -> Printers.
In Windows XP, select the Start menu -> Control Panel -> Printers and Other Hardware ->
Printers and Faxes.
In Windows 2000, select the Start menu -> Settings -> Printers.
2. Right-click your model name icon, and then select Printing Preferences from the
displayed menu.
The printer driver setup window appears.
Important
Opening the printer driver setup window through Properties displays such tabs regarding the
Windows functions as the Ports (or Advanced) tab. Those tabs do not appear when opening
through Printing Preferences or application software. About tabs regarding Windows functions,
refer to the user's manual for the Windows.
Page top
Maintenance Tab
> Canon IJ Printer Driver > Maintenance Tab
Maintenance Tab
The Maintenance tab allows you to perform machine maintenance or change the settings of the
machine.
Features
Cleaning the Print Heads
Cleaning the Paper Feed Rollers
Aligning the Print Head Position
Checking the Print Head Nozzles
Setting the Paper Source for Plain Paper
Cleaning Inside the Machine

Managing the Machine Power
Related features
Reducing the Machine Noise/Quiet Mode
Changing the Machine Operation Mode
Page top
> Canon IJ Status Monitor

The Canon IJ Status Monitor is an application software that shows the status of the printer and the
progress of printing on the Windows screen. You will know the status of the printer with graphics, icons,
and messages.
Launching the Canon IJ Status Monitor

The Canon IJ Status Monitor launches automatically when data is sent to the printer. When launched, the
Canon IJ Status Monitor appears as a button on the Task Bar.
Click the Status Monitor button displayed on the Task Bar. The Canon IJ Status Monitor appears.
Note
To open the Canon IJ Status Monitor when the printer is not printing, open the printer driver setup
window and click View Printer Status... on the Maintenance tab.
When Errors Occur

The Canon IJ Status Monitor is automatically displayed when an error occurs (e.g., if the printer runs out
of paper or if the ink is low).
In such cases, take the appropriate action as described.

Page top
> The Canon IJ Preview

The Canon IJ Preview is an application software that displays what the print result will look like before a
document is actually printed.
The preview reflects the information that is set within the printer driver and allows you to check the
document layout, print sequence, and number of pages. You can also change the media type and paper
source settings.
If you want to display a preview before printing, open the printer driver setup window , click the Main tab,
and check the Preview before printing check box.
If you do not want to display a preview before printing, uncheck the check box.
Related Topic
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine

Copying

Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Printing Lined Paper or Graph Paper

Printing Template Forms Such As Lined Paper or Graph Paper
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Printing Lined Paper or Graph Paper > Printing
Template Forms Such As Lined Paper or Graph Paper

You can print a template form such as lined paper, graph paper or check list on A4 or Letter-sized plain
paper. Use the printed template as a notepad.
Printing template forms
1.
2.
Load A4 or Letter-sized plain paper in the Cassette.
3.
Select
4.

button.
, or
to select Template print, then press the OK
5.

button.
, or
to select Template Form, then press the OK
Settings on the HOME screen, then press the OK button.
The following templates are available:
Notebook paper
You can select three line spacing formats.
Notebook paper 1: 8 mm spacing

Graph paper
You can select two square sizes.
Graph paper 1: Graph 5 mm
Graph paper 2: Graph 3 mm
Checklist
You can print a notepad with check boxes.
Staff paper
You can print staff paper with 10 staves.
6.
Specify the paper size, then press the OK button.
7.
Specify the number of copies.
8.
Press the Color button to start printing.
The machine starts template printing.

Page top
Copying
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying
Copying
Making Copies
Page top
Making Copies
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies
Making Copies
For the basic procedure to make copies, refer to Copying.
1. Make sure that the machine is turned on.

2. Select
Copy on the HOME screen, then press the OK button.
3. Load paper.
4. Load the original document on the Platen Glass.
5. Confirm the page size and media type.
Note
To change the settings, select the item and press the OK button.
Setting Items
Page size and media type settings are saved in each mode.
When you make copies, you can specify various layouts on the screen that appears when you
press the left Function button.
6. Press the + or - button to specify the number of copies.
7. Press the Color button for color copying, or the Black button for black & white
copying.
The machine starts copying.
Remove the original on the Platen Glass after copying is complete.
Important
Do not open the Document Cover or remove the original from the Platen Glass until copying is
complete.
Making Copies
Note
When you press the right Function button while Preview is displayed on the screen, you can
preview an image of the printout on the preview screen.
To cancel copying, press the Stop button.
Page top
Setting Items
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Setting Items
Setting Items
Copy on the HOME screen, then press the OK button to display the Copy screen.
Select
Note
Page size and media type settings are saved in each mode.
The settings of the page size, media type, etc. are retained even if the machine is turned off.
Depending on the functions, some setting items cannot be specified in combination.
1. Magnification
Specify the reduction/enlargement method.
2. Intensity
Specify the intensity.
3. Page size
Select the page size of the loaded paper.
4. Media type
5. Select the media type of the loaded paper.
6. Print quality
Adjust print quality according to the original.
Important
If you used Fast (speed-priority) with media type set to Plain paper and the quality is not as
good as expected, select Standard or High (quality-priority) and try copying again.
Select High (quality-priority) to copy in grayscale. Grayscale renders tones in a range of grays
instead of black or white.
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Reducing or Enlarging
a Copy

You can select from the following reduction/enlargement methods according to your purpose.
Fit-to-page
The machine automatically reduces or enlarges the image to fit the page size.
Zoom (25 - 400%)

You can specify the copy ratio as a percentage to reduce or enlarge copies.
On the screen that appears when selecting Zoom (25 - 400%), change the ratio using the Easy,
,
, or
Scroll Wheel or the
button, then press the OK button to finalize the setting.
Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
On the screen that appears when selecting Preset ratio, select the ratio using the Easy-Scroll Wheel
or
or the
button, and then press the OK button to finalize the setting.
Note
When you select Fit-to-page, the document size may not be detected correctly depending on the
original. In this case, select Preset ratio, Zoom (25 - 400%), or 100%.
When you want to copy at the same size as the original, select 100%.
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Changing Intensity
Setting
Turn the Easy-Scroll Wheel clockwise to increase intensity or counterclockwise to decrease it.
You can also use the
or
button to make settings.
Press the right Function button in the Intensity screen to automatically match the intensity to the original
on the Platen Glass and then print the image.
The slide bar for the intensity adjustment on the LCD changes to Auto when it is done.
Important
While Auto is selected, you cannot change the intensity by using the Easy-Scroll Wheel. Press the
right Function button to enable manual intensity settings again and then specify the intensity.
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Displaying the
Preview Screen

When you press the right Function button while Preview is displayed on the screen, you can preview an
image of the printout on the preview screen.
Important
The original will be scanned to display the preview image. Therefore, do not open the Document
Cover until the preview screen appears.
Originals are rescanned after displaying the preview screen and before copying starts. Therefore,
do not open the Document Cover or remove the original from the Platen Glass until copying is
complete.
1. Preview of the original document

The original that is set on the Platen Glass is displayed. If the displayed image is skewed, refer to
Loading Paper / Originals and reset the original properly, then display the preview screen again and
preview the original.
2. Page size
A frame showing the selected page size appears over the image. The inside of the frame will be
printed.
3. Magnification
The magnification setting, which was set when the preview screen was displayed, is displayed. If
Preset ratio, Zoom (25 - 400%), or 100% is selected, you can change the magnification setting on
the preview screen.
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions

Special Copy
Choose the copy method according to your purpose.
Borderless Copy
You can copy images so that they fill the entire page without borders.
2-on-1 Copy
You can copy two original pages onto a single sheet of paper by reducing each image.
Copying Two Pages to Fit onto a Single Page (2-on-1 Copy)
4-on-1 Copy
You can copy four original pages onto a single sheet of paper by reducing each image. Four
different layouts are available.
Copying Four Pages to Fit onto a Single Page (4-on-1 Copy)
Image Repeat
You can copy an image multiple times onto a single page. You can set the machine to
automatically select the number of times it repeats the image, or you can specify the number.
Frame Erase
When copying a thick original document such as books, you can make a copy without black
margins around the image or lighten the shadow on the crease.
Copying Thick Originals Such as Books (Frame Erase)
Trimming
You can clip (trim) a necessary part of the original document to copy.
Masking
You can erase (mask) a specified part of the original document to copy.

Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Using Useful Copy Functions >

2. Select
Copy on the HOME screen, then press the OK button.
3. Load paper on the Rear Tray.

4. Load the original document on the Platen Glass.
Note
For details on the types and conditions of originals which you can copy, refer to Loading Paper /
Originals .
5. Press the Left function button when the print settings confirmation screen is
displayed.
The Special copy screen is displayed.
Note
When you use these functions, you cannot select some of the options for the magnification/
page size/media type settings.
If you make the Special copy setting first, any unavailable options will be disabled or hidden in
the basic copy settings screen.
If you make the basic copy settings first, apply any Special copy setting, then return to the basic
copy settings screen, any items that require modification will be corrected automatically or
.
displayed with
To cancel Special copy settings, press the Stop button. If the number of copies or the intensity
has been set already, press the Stop button twice.
Page top

You can copy images so that they fill the entire page without borders.
1. Select Borderless copy, then press the OK button.

Follow the on-screen instructions.
copying.
Note
Slight cropping may occur at the edges since the copied image is enlarged to fill the whole page.
You can change the width to be cropped from the borders of the original image as needed.
Changing the Machine Settings on the LCD
Page top

You can copy two original pages (A) (B) onto a single sheet of paper (C) by reducing each image.
1. Select 2-on-1 copy, then press the OK button.

copying.
Note
You can skip scanning of the second sheet of originals and copy only the first sheet. After scanning
the first sheet of originals by pressing the Color or Black button, press the left Function button to
select Print first sheet on the screen that appears.
If Device memory is full. appears on the LCD when scanning, set the print quality to Standard and
try copying. If the problem is not resolved, reduce the number of sheets of documents or set the
print quality to Fast (speed-priority) and try copying again.
Page top

You can copy four original pages onto a single sheet of paper by reducing each image. Four different
layouts are available.
1. Select 4-on-1 copy, then press the OK button.

copying.
Note
If you want to copy only 1, 2, or 3 pages, press the left Function button to select Print now after
scanning the last page that you want to copy.
If Device memory is full. appears on the LCD when scanning, set the print quality to Standard and
try copying. If the problem is not resolved, reduce the number of sheets of documents or set the
print quality to Fast (speed-priority) and try copying again.
Page top

You can copy an image multiple times onto a single page. You can set the machine to automatically
select the number of times it repeats the image, or you can specify the number.
1. Select Image repeat, then press the OK button.

copying.
Note
The area scanned from the original depends on the enlargement/reduction setting.
Page top

When copying a thick original document such as books, you can make a copy without black margins
around the image or lighten the shadow on the crease. Using this function, you can reduce unnecessary
ink consumption.
1. Select Frame Erase, then press the OK button.

copying.
Note
Close the Document Cover.

There may be a narrow black margin that appears around the image. This function removes the
dark margins only. If a scanned book is too thin or when the machine is used nearby a window or in
a bright environment, a faint black frame may remain. Also, if the color of an original is dark, the
machine cannot distinguish the document color from the shadow and this may cause slight
cropping or shadow on the crease.
When you press the right Function button while Preview is displayed on the screen, you can preview
an image of the printout on the preview screen.
Page top

You can clip (trim) a necessary part of the original document to copy.
1. Select Trimming, then specify the top left and bottom right of the trimming area
using
, or
button by following instructions on the LCD.
2. After specifying the trimming area, press the OK button.

You can preview an image of the printout on the preview screen.
copying.
Note
If you press the left Function button after pressing the OK button on the Trimming image screen to
display the print setting screen, you can redo the scanning of the original document.
Page top

You can erase (mask) a specified part of the original document to copy.
1. Select Masking, then specify the top left and bottom right of the masking area using
,
, or
button by following instructions on the LCD.
2. After specifying the masking area, press the OK button.

You can preview an image of the printout on the preview screen.
copying.
Note
If you press the left Function button after pressing the OK button on the Masking image screen to
display the print setting screen, you can redo the scanning of the original document.
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Printing from a Memory Card


Setting Up the Card Slot as the Memory Card Drive of the Computer
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Printing from a Memory Card > Printing
Photographs Saved on a Memory Card

For the basic procedure to print from a memory card, refer to Printing from a Memory Card .
Page top
Setting Items
Photographs Saved on a Memory Card > Setting Items
Setting Items
Print Settings Confirmation Screen
or
In the Memory card mode, select the photo to print using the Easy-Scroll Wheel or the
button, specify the number of copies, press the OK button, then the screen is displayed.
Note
1.
Page size
2.
Media type
Select the media type of the loaded paper.
3.
Print quality
4.
Bordered/Borderless
Select bordered or borderless print.

Note
When you set Plain paper in Media type, the photo will be printed with bordered even you
select Borderless.
Advanced Screen
When you press the left Function button in the print settings confirmation screen, the Advanced
screen is displayed.
When Auto photo fix ON is selected, the scene or person's face of a shot photo is recognized and
the most suitable correction for each photo is made automatically. It makes a darkened face by
backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and
Setting Items
corrects each scene with the most suitable color, brightness, or contrasts automatically to print.
Note
Photos in a memory card are printed in Auto photo fix as default. In Auto photo fix, you can
specify only (1) Date, (2) File no., or (3) Red-Eye correc. below.
If you do not satisfy the print result in Auto photo fix, you can select Manual correction. If you
select Manual correction, you can specify each advanced setting item below.
1.
Date
Activate/deactivate to print the shooting date on a photo.
2.
File no.
Activate/deactivate to print the file no. on a photo.

Note
It is not possible to print both the shooting date and the file no. when Layout print is
selected as a print function in the memory card mode. Even if both Date ON and File no.
ON are set, only the shooting date will be printed. If you want to print the file no., select
Date OFF.
3.
Red-Eye correc.
Corrects red eyes in portraits caused by flash photography.
4.
Vivid photo
Makes green and blue more lively.
Setting Items
5.
Photo opt. Pro
Automatically optimizes brightness and tone of a photo.
6.
Noise reduction
Reduces the noise on blue areas like the sky as well as on black areas.
7.
Face brightener
Brightens a darkened face on the photo taken against the light.
8.
Image optimizer
Corrects and smoothes the jagged contours for printing.
9.
Brightness
Adjust brightness.
10.
Contrast
Adjust contrast.
11.
Color hue
Adjust color hue.

For example, you can increase red or yellow to adjust the skin tone.
12.
Effects
Applies special effects to the photo, such as printing in sepia tones or with a sketch
illustration like effect.
Page top
Photographs Saved on a Memory Card > Printing by Using the Photo Index Sheet

Photo Index Sheet is an A4 or Letter-size plain paper on which thumbnail images of photos saved on a
memory card are printed. Print out a Photo Index Sheet, mark the images that you want to print, scan the
sheet in, and the machine then prints the selected images. You can also specify other settings, such as
paper size and type, by using this sheet; you do not have to make settings by using the Operation Panel
on the machine.

2. Load A4 or Letter-sized plain paper in the Cassette.
3. Select
Photo index sheet on the HOME screen, then press the OK button.
4. Make sure that
Index sheet print is selected, then press the OK button.
5. Insert a memory card into the Card Slot following the instruction on the LCD.
Caution
Do not remove the memory card until printing the Photo Index Sheet(s) is completed.
Note
For information on how to insert a memory card, refer to Printing from a Memory Card .
6. Select a range of images to include in the Photo Index Sheet, then press the OK
button.
The following ranges can be selected.
Print all photos:
Prints all images.

Set no. of copies:
Prints the specified number of images from the newest one.

Search:
Prints images by specifying the shot date range.
Note
It may take a while to display the Search screen depending on the number of photos saved on
the memory card.
7. Press the Color button to start printing the Photo Index Sheet.
The Photo Index Sheet(s) will be printed.
Note
If 31 or more images are selected, two or more Photo Index Sheets are printed.
8. Fill in the appropriate circles in the Photo Index Sheet.

Fill in the appropriate circles (
and their print options.
Good
Bad
(a) Check mark

(b) Line only
(c) Too light
) with a dark pencil or a black ink pen to select the photos to print
A. Select the page size and other printing formats.
B. Select Date/Auto image fix as necessary.
C. Fill this circle to print a copy of all photographs.

* If you filled this circle, any other circles you filled for the number of copies to print for each
photograph will be disregarded, and one copy each of all photographs will be printed.
D. Select the number of copies (fill in a circle under each photograph to print).
E. Confirm and follow the described printing procedure.
F. Fill this circle to print the same Photo Index Sheet again.
* If you filled this circle, all other filled settings will be disregarded.
G. Be careful not to make the bar code dirty.
If the bar code is dirty or has wrinkles, the machine may not scan the Photo Index Sheet
properly.
Important
Be sure to fill in a circle for every setting item except options.

If there is more than one Photo Index Sheet, fill in all the sheets.
If the filled circles on the Photo Index Sheet are not dark or vast enough, the machine may
not scan the Photo Index Sheet properly.
9. Load the paper.

Make sure that the page size and media type of the loaded paper match those specified on the
Photo Index Sheet.
Note
When printing images using the Photo Index Sheet, you can select 4" x 6" (101.6 x 152.4 mm),
5" x 7" (127 x 177.8 mm), 8.5" x 11" (Letter), or A4 for the page size.
10. Make sure that
Scan sheet and print is selected, then press the OK button.
11. Place the Photo Index Sheet face-down on the Platen Glass, then press the OK
button.
When placing the Photo Index Sheet, place the front side down and align the upper left corner of it
with the alignment mark as shown in the figure below.
The Photo Index Sheet is scanned and the specified photos will be printed.
Remove the Photo Index Sheet on the Platen Glass after printing is complete.
Important
If Failed to scan Photo Index Sheet. is displayed on the LCD, press the OK button and confirm
the following:
The Platen Glass and the Photo Index Sheet are not dirty
The Photo Index Sheet is placed in the correct position with its front side facing down
You have filled in all the necessary circles on the sheet
Only one option is selected for items that do not accept two or more selections
Do not remove the memory card while printing is in progress.
Note
To cancel printing, press the Stop button.

To continue to print photographs using subsequent Photo Index Sheets, repeat the procedure
from step 10.
If the memory card has been removed and then reinserted before printing with the Photo Index
Sheet, it may take some time before printing starts.
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Printing from a Memory Card > Using Useful
Printing Functions

Printing Memory Card Photos in Various Layouts
You can select from the following printing methods according to your purpose.
Layout Print
You can paste photos of your choice in the specified layout.
Printing Several Photos on a Single Sheet of Paper (Layout Print)
Sticker Print
You can print your favorite photo with a frame on Canon Photo Stickers.
DPOF print
If you have specified Digital Print Order Format (DPOF) settings on your digital camera, you
can print using these settings.
DPOF print
Captured info print

You can print information on photographs at the time of its shooting (Exif info) in the margin of
Photo index print or selected individual photos.
Captured info print
Photo index print

You can print an index of all the photos saved on a memory card.
Photo index print
Print all photos

You can print all photos saved on the memory card.
Print all photos
ID photo size print

You can print a photo saved on a memory card in the ID photo size.
Calendar print
You can print a calendar using photos saved on a memory card.

Page top
Printing Functions > Settings for Printing a Photo on a Memory Card

2. Load paper.
3. Select
Memory card on the HOME screen, then press the OK button.
4. Insert the memory card into the Card Slot.

The memory card menu is displayed.
Note
For information on how to insert a memory card, refer to Printing from a Memory Card .
Page top
Printing Several Photos on a Single Sheet of Paper (Layout Print)
Printing Functions > Printing Several Photos on a Single Sheet of Paper (Layout Print)
Printing Several Photos on a Single Sheet of Paper (Layout

Print)
You can paste photos of your choice in the specified layout.
1. Select Layout print, then press the OK button.

Note
If you skip a selected frame without pasting a photo on it when selecting Paste one by one,
press the left Function button on the photo layout screen.
When you select Borderless, the media type cannot be set to Plain paper.
When Mixed 1, Mixed 2, or Mixed 3 is selected, you can select A4 or 8.5" x 11" (LTR) for the page
size.
You cannot paste photos over multiple pages at one time. If you have photos for two or more
pages, print each page as you finish pasting photos for the page.
Even if both Date ON and File no. ON are set, only the shooting date will be printed. If you want
to print the file no., select Date OFF. It is not possible to print both the shooting date and the file
no.
Other Options
Searching for Photos with the Shooting Date (Search)
Page top
Printing Functions > Printing on Stickers (Sticker Print)

You can print your favorite photo with a frame on Canon Photo Stickers.
1. Select Sticker print, then press the OK button.

Note
You cannot use the Cassette to print on stickers. Load stickers on the Rear Tray.
You can only load one sheet of stickers at a time on the Rear Tray.
or
button.
Select the Frame to print using the Easy-Scroll Wheel or the
To print with no frame, press the left Function button when No frame is displayed on the
screen.
or
When the photo is upside down, use the
button to rotate the frame by 180 degrees to
orient it properly against the photo.
To rotate the photo by 90 degrees to fit it within the frame, use the cropping edit screen to rotate
the cropping area.
Other Options
Page top
DPOF print
Printing Functions > DPOF print
DPOF print
1. Select DPOF print, then press the OK button.

If you have specified Digital Print Order Format (DPOF) settings on your digital camera, you can print
using these settings.
Note
The machine supports the following DPOF functions:

Version:
Based on ver. 1.00
Supported image types:
CIFF, Exif (TIFF), and JFIF
Print Style Standard Print:
Prints photos that were specified as "Standard Print" with DPOF
Print Style Index Print:
Prints an index of photos that were specified as "Index Print" with DPOF using the machine's
index printing layout
Print Style Multi-Image Print:
Prints a photo that was specified as "Multi-Image Print" with DPOF (with the specified number
of copies and layout)
Print Photo Select:

Prints only photos specified with DPOF
Number of copies:
Prints the number of copies specified with DPOF
Prints are automatically enlarged or reduced to match the page size. Edges of the photo may
be clipped off depending on the page size.
The shot date order setting by which photos are sorted follows that of DPOF.
DPOF is a standard format to record the specified information regarding images, such as
which image or number of copies to print.
Page top
Captured info print
Printing Functions > Captured info print
Captured info print

You can print information on photographs at the time of its shooting (Exif info) in the margin of Photo
index print or selected individual photos.
1. Select Captured info print, then press the OK button.

Note
The following print methods are available:

Single photo:
Prints the information in the margin of selected individual photos.

List:
Prints the information in the margin of the Photo index print of all photos or selected photos.
You can select photos to print by the shooting date.
Other Options
Using Useful Copy Functions (This function can only be used when Single photo is
selected.)
Printing a Specified Area (Trimming) (This function can only be used when Single photo is
selected.)
Page top
Photo index print
Printing Functions > Photo index print
Photo index print

You can print an index of all the photos saved on a memory card.
1. Select Photo index print, then press the OK button.

2. Select All photos, then press the OK button.
Note
The following print methods are available:

Contact print: 35 mm film images are printed in its negative size as in contact print.
Standard: The number of photos printed on a single sheet of paper depends on the size of the
paper.
A4/Letter: 80 photos, 8" x 10"/203.2 x 254.0 mm: 72 photos, 5" x 7"/127.0 x 177.8 mm: 35 photos
4" x 6"/101.6 x 152.4 mm: 24 photos, Wide/101.6 x 180.6 mm: 28 photos
You can search for photos to print with the shooting date.
Search with the shooting date.
Page top
Print all photos
Printing Functions > Print all photos
Print all photos

You can print all photos saved on the memory card.
1. Select Print all photos, then press the OK button.

Note
Other Options
Page top
Printing Functions > Printing ID Photo-ID photo size print

You can print photos on a memory card in a specified size such as an ID photo.
1. Select ID photo size print, then press the OK button.

2. Select the photo to print using the Easy-Scroll Wheel or the
or
button, then
press the OK button.

Note
The following sizes are available.

Print on the paper larger than the size you specified.
1.18"x0.98"(3.0x2.5 cm)
1.57"x1.18"(4.0x3.0 cm)
1.57"x1.57"(4.0x4.0 cm)
1.57"x2.36"(4.0x6.0 cm)
1.77"x1.38"(4.5x3.5 cm)
1.77"x1.77"(4.5x4.5 cm)
1.97"x1.97"(5.0x5.0 cm)
2.17"x2.17"(5.5x5.5 cm)
2.36"x1.77"(4.0x6.0 cm)
4.72"x4.72"(12.0x12.0 cm)
1"x1.43"(2.5x3.6 cm)
1.43"x2"(3.6x5.1 cm)
1.77"x2.17"(4.5x5.5 cm)
Other Options
Page top
Printing Functions > Creating a Calendar-Calendar print

You can create an original calendar using your favorite photos and a calendar.
1. Select Calendar print, then press the OK button.

Important
Be sure to load the paper in portrait orientation.

Note
The following layouts are available.

Paper: Portrait format Photo: Bottom (landscape)
Paper: Portrait format Photo: Top (landscape)
Paper: Landscape format Photo: Right (portrait)
Paper: Landscape format Photo: Left (portrait)
Select the landscape format for a landscape-oriented photo or the portrait format for a portraitoriented photo.
or
button to select the Photo If the photo is upside-down,
or
you can use the
button to rotate the photo 180 degrees.
To change the start of the week on the printed calendar, press the left Function button on the screen
where Advanced is displayed, then select Start of the week.
To confirm or change the settings such as brightness, press the left Function button on the screen
where Advanced is displayed, then select Advanced settings.
Even if both Date ON and File no. ON are set, only the shooting date will be printed. If you want to
print the file no., select Date OFF. It is not possible to print both the shooting date and the file no.
Other Options
Printing a Specified Area (Trimming) (This function can only be used when Single photo is
selected.)
Page top
Display Functions

When you press the left Function button when Change display is displayed on the screen, you can
change the way photos are displayed.
Normal screen display:

Shows one photo.
Thumbnail display:
Shows nine photos at a time. Select the photo using the Easy-Scroll Wheel or the
or
button, then press the + or - button to specify the number of copies.
Full-screen display:
Shows one photo at full-screen.
Enlarged display:
Shows enlarged photo twice as much as the original. Move the area to show using the
, or
button. Press the OK button to return to the previous display mode.
Slide show:
Shows next photos automatically. To stop the slide show, press the Stop button.
Page top
Display Functions > Printing a Specified Area (Trimming)

You can edit images displayed on the LCD by cropping them.
Note
Crop images after specifying the page size, media type, and bordered or borderless printing in the
print settings screen. If you change the paper settings after cropping, the cropped area may be
adjusted to match the paper, or be disabled completely.
1. Select the photo to crop.

2. Press the right Function button when Edit is displayed on the screen.
3. Select Trimming, then press the OK button.
The cropping edit screen is displayed.
4. Choose the area to print.

,
, and
buttons:
Position the cropping frame.

Easy-Scroll Wheel:
Sets the cropping frame size.
Turn the Easy-Scroll Wheel clockwise to enlarge the size of the cropping frame or counterclockwise
to reduce it.
Left Function button:
Changes the aspect ratio of the cropping frame.

Right Function button:
Rotates the cropping frame.

To switch the cropping frame between portrait and landscape orientations, press this button.
5. Press the OK button to finalize your selection of cropping area.

The area to be cropped is specified, and the original photo is displayed.
Note
The cropped image cannot be newly saved on the memory card.

The cropping area is displayed only for photos which have been cropped.
To change the cropped area once it has been set, press the right Function button again when
Edit is displayed on the screen, select Trimming, then press the OK button.
To cancel cropping after cropping has been set, press the right Function button again when
Edit is displayed on the screen, select Cancel trimming, then press the OK button. Select
Displayed images only or All images, then press the OK button.
Page top
Display Functions > Searching for Photos with the Shooting Date (Search)

When there are a lot of photos saved on the memory card, you can choose to display and print only
photos shot on the specified date or within the specified range of dates.
Note
If the number of copies to print is already specified for some photos before searching with the
shooting date, or if some photos are already pasted on a layout, those photos will still be selected
for printing even if they were not shot on the specified date or within the specified date range.
1. Display the search method screen.

Setting in Edit:
2. Select Search, then press the OK button.
The Search screen is displayed.

Setting in Search in the Specify print range screen:
1. Select Search, then press the OK button.
The Search screen is displayed.
2. Set the search method.

To specify only one date for search:
Select One date only.
To specify the date range for search:
Select Select date range.
3. Press the OK button.

The date input screen is displayed.
Note
It may take a while for the date input screen to be displayed depending on the number of
photos saved on the memory card.
4. Specify the date range, then press the OK button.

If you selected One date only:
1. Specify the date to search, then press the OK button.

If you selected Select date range:
1. Specify the start date to search, then press the OK button.
2. Specify the end date to search, then press the OK button.
Note
The date to be specified is displayed according to the settings of Date display in Advanced
settings under Device settings.
To cancel the selected date range, press the right Function button when Edit is displayed on
the screen, select Cancel selected date, then press the OK button.
Page top
Setting Up the Card Slot as the Memory Card Drive of the Computer
Advanced Guide > Printing Using the Operation Panel of the Machine > Printing from a Memory Card > Setting Up the
Card Slot as the Memory Card Drive of the Computer
Setting Up the Card Slot as the Memory Card Drive of the

Computer
The Card Slot of the machine can also be used as the memory card drive of the computer.
Important
When Read/write attribute in Advanced settings under Device settings is set to Writable from
PC using the Operation Panel of the machine, card direct printing cannot be done. After using
the Card Slot as the memory card drive of the computer, remove the memory card, then be
sure to set Read/write attribute to Not writable from PC. When you turned off the machine,
Writable from PC will be canceled and the setting is returned to Not writable from PC when
you turn on the machine next time.
1. Make sure that the memory card is not set.

If the memory card is set, remove it from the Card Slot. For details, refer to Printing from a
Memory Card .
2. Select
3. Select
Device settings, then press the OK button.
4. Select Advanced settings, then press the OK button.

5. Select Read/write attribute, then press the OK button.
6. Specify the read/write attribute.
Not writable from PC
The Card Slot is used only for reading. Be sure to select this mode when printing photos from
a memory card.
Writable from PC
The Card Slot is used as the memory card drive of a USB connected computer. Data can be
written into the memory card from the USB connected computer.
7. Press the OK button.

Important
If you used the Card Slot as the memory card drive of the computer, you need to do a "safe
removal" operation on your computer before physically removing the memory card from your
machine.
In Windows, right-click the

Removable Disk icon and click Eject. If Eject is not
displayed on the screen, confirm that the Access lamp is not flashing and remove the
memory card.
On a Macintosh, drag the
Mount drive icon into the Trash.
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Photo Printing from Printed Photo


Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Photo Printing from Printed Photo > Printing from
Printed Photo

For the basic procedure for printing from a printed photo, refer to the Printing Photos from Printed Photos .
Page top
Setting Items
Advanced Guide > Printing Using the Operation Panel of the Machine > Photo Printing from Printed Photo > Printing from
Printed Photo > Setting Items
Setting Items
Print Settings Confirmation Screen
In the Easy photo reprint mode, select the photo to print using the Easy-Scroll Wheel or the
button, specify the number of copies, press the OK button, then the screen is displayed.
or
Note
1.
Page size
2.
Media type
Select the photo paper type to use.
3.
Print quality
4.
Bordered/Borderless
Advanced Print Settings Screen

When you press the left Function button in the print settings confirmation screen, the Advanced
screen is displayed.
When Auto photo fix ON is selected, the scene or person's face of a shot photo is recognized and
the most suitable correction for each photo is made automatically. It makes a darkened face by
backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and
corrects each scene with the most suitable color, brightness, or contrasts automatically to print.
Note
If you do not satisfy the print result in Auto photo fix, you can select Manual correction. If you
Setting Items
select Manual correction, you can specify the following advenced setting items.
1.
Face brightener
2.
Fade restoration
Corrects the color when printing photos that have faded or color cast over time.
3.
Brightness
Adjust brightness.
4.
Contrast
Adjust contrast.
5.
Color hue
Adjust color hue.

For example, you can increase red or yellow to adjust the skin tone.
Page top
Advanced Guide > Printing Using the Operation Panel of the Machine > Photo Printing from Printed Photo > Using Useful
Printing Functions

Special Printing of Photo
Choose the printing method according to your purpose.
Sticker print
You can print your favorite photo on Canon Photo Stickers to create your own stickers.
Print all photos

You can print all scanned photos.
Page top
Printing Functions > Settings for Printing a Scanned Photo

2. Select
Easy photo reprint on the HOME screen, then press the OK button.
3. Follow the on-screen instructions, then press the OK button to start scanning a
printed photo.
The Easy photo reprint screen is displayed.

Note
For the basic procedure for printing from a printed photo, refer to Printing Photos from Printed
Photos.
Page top
Printing Functions > Printing on Stickers (Sticker Print)

You can create your own stickers from a scanned photo using Canon Photo Stickers.
1. Select Sticker print, then press the OK button.

2. Select the layout, then press the OK button.
Note
You cannot use the Cassette to print on stickers. Load stickers on the Rear Tray.
You can only load one sheet of stickers at a time on the Rear Tray.
Other Options
Page top
Printing Functions > Printing All Photos (Print All Photos)

You can print all scanned photos.
1. Select Print all photos, then press the OK button.

Page top
Display Functions

When you press the left Function button when Change display is displayed on the screen, you can
change the way photos are displayed.
Normal screen display

Shows one photo.
Full-screen display
Shows one photo at full-screen.
Enlarged display
Shows enlarged photo twice as much as the original. Move the area to show using the
, or
button. Press the OK button to return to the previous display mode.

You can edit images displayed on the LCD by cropping them.
1. Select the photo to crop.

3. Select Trimming, then press the OK button.
The cropping edit screen is displayed.
4. Choose the area to print.

,
, and
buttons:
Position the cropping frame.

Easy-Scroll Wheel:
Sets the cropping frame size.
Turn the Easy-Scroll Wheel clockwise to enlarge the size of the cropping frame or
counterclockwise to reduce it.
Left Function button:
Changes the aspect ratio of the cropping frame.

Right Function button:
Rotates the cropping frame.

To switch the cropping frame between portrait and landscape orientations, press this button.
5. Press the OK button to finalize your selection of cropping area.

The area to be cropped is specified, and the original photo is displayed.
Note
The cropping area is displayed only for photos which have been cropped.
To change the cropped area once it has been set, press the right Function button again
when Edit is displayed on the screen, select Trimming, then press the OK button.
To cancel cropping after cropping has been set, press the right Function button again
when Edit is displayed on the screen, select Cancel trimming, then press the OK button.
Select Displayed images only or All images, then press the OK button.
Page top
Scanning
Advanced Guide > Scanning
Scanning
Scanning Images
Saving Scanned Data on the USB flash drive/Memory Card Using the Operation Panel of the Machine
Saving Scanned Data to PC Using the Operation Panel of the Machine


Page top
Scanning Images
Advanced Guide > Scanning > Scanning Images
Scanning Images
Scanning Images
Before Scanning
Placing Documents
Page top
Scanning Images
Advanced Guide > Scanning > Scanning Images > Scanning Images
Scanning Images
You can scan images from the machine to a computer without printing them and save them in popular
image data, such as JPEG, TIFF, bitmaps, or PDF. You can also save scanned images in a PDF or
JPEG data format in the memory card or USB flash drive.
Select the scanning method according to your purpose.
Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of the Machine

Page top
Before Scanning
Advanced Guide > Scanning > Scanning Images > Before Scanning
Before Scanning
Before scanning images, confirm the following:
Does the original to be scanned meet the requirements for an original to
be set on the Platen Glass?

If you save the data to PC, refer to Placing Documents for details.
If you save the data to the USB Flash Drive/Memory Card, refer to Loading Paper / Originals for
details.
Page top
Placing Documents
Advanced Guide > Scanning > Scanning Images > Placing Documents
Placing Documents
Learn how to place documents on the machine's Platen. Place documents correctly according to the type
of document to be scanned. Otherwise, documents may not be scanned correctly.
Important
Close the Document Cover when scanning documents.

Place documents as described below to allow the machine to detect the document automatically.
When scanning by specifying the document size, always align an upper corner of the document with
the corner at the arrow of the Platen, regardless of the document type.
Placing Documents
When Scanning Photos, Hagaki, Business Cards
or CD/DVD
When Scanning Magazines, Newspapers or Text

Documents
Placing a Single Document
Place the document face-down on the Platen and

align an upper corner of the document with the
corner at the arrow of the Platen.
Place the document face-down on the Platen, with 3

/8 inches (1 cm) or more space between the edges
of the Platen and the document.
Important
If the document is large (such as an A4 photo)

and cannot be placed away from the edges/
arrow of the Platen, scan by specifying the file
format.
Reflective CD/DVD labels may not be scanned
properly.
Placing Multiple Documents
Allow 3/8 inches (1 cm) or more space between the

edges of the Platen and documents, and between
documents.
Placing Documents
Note
You can place up to 10 documents.

Positions of slanted documents (10 degrees
or less) are corrected automatically.
Page top
Saving Scanned Data on the USB flash drive/Memory Card Using the Oper... Page 359 of 758 pages
Advanced Guide > Scanning > Saving Scanned Data on the USB flash drive/Memory Card Using the Operation Panel of
the Machine
Saving Scanned Data on the USB flash drive/Memory Card

Saving Scanned Data on the USB flash drive/Memory Card Using the Operation Panel of the Machine
Page top
Saving Scanned Data on the USB Flash Drive/Memory Card Using the Ope... Page 360 of 758 pages
Advanced Guide > Scanning > Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of
the Machine > Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of the Machine
Saving Scanned Data on the USB Flash Drive/Memory Card

You can save scanned data on the USB flash drive or memory card using the Operation Panel.
Important
Before inserting the USB flash drive.

You may need an extension cable if the USB flash drive cannot be inserted into the Direct Print
Port of the machine. For details, ask an electronics store.
Depending on the type of USB flash drive, the operation may not be guaranteed.
Some USB flash drives with security settings may not be used.
Do not remove the USB flash drive or memory card from the machine under the following
conditions:
while scanning is in progress
before saving scanned data
You cannot use the USB flash drive and memory card at the same time. Be sure to use either of
them as a media for saving scanned data.
Scanned data saved on the USB flash drive or memory card cannot be printed.
For safety reasons, we recommend storing the scanned data saved on a memory card or USB
flash drive to another media periodically to avoid unexpected accidents.
We assume no responsibility for damage or loss of data for whatever reasons even within the
warranty period
2. Select
Scan on the HOME screen, then press the OK button.
The screen for selecting to which you save the data is displayed.
3. Insert the USB flash drive in the Direct Print Port or the memory card in the Card
Slot.
Note
For information on the types of the memory card compatible with the machine, refer to Printing
from a Memory Card .
4. Select USB flash drive or Memory card, then press the OK button.
5. Select Save to USB flash if you selected USB flash drive in step 4, or Save to
memory card if you selected Memory card, then press the OK button.
The Scan document screen is displayed.
6. Specify the necessary settings, then press the OK button.

Setting Items
Saving Scanned Data on the USB Flash Drive/Memory Card Using the Ope... Page 361 of 758 pages
7. Load the original on the Platen Glass following the instruction on the LCD.
Note
Refer to Loading Paper / Originals for how to load the original on the Platen Glass.
8. Press the Color button for color scanning, or the Black button for black & white
scanning.
When Preview ON is selected, press the OK button after the preview screen is displayed on the
LCD.
The machine starts scanning and scanned data is saved either on the USB flash drive or the
memory card, which you select as the media for saving scanned data.
Remove the original on the Platen Glass after scanning is complete.
Note
You can scan images continuously only when selecting PDF. Continue scanning following the
confirmation screen. You can save up to 100 pages of images in one PDF file.
If the USB flash drive or the memory card becomes full while scanning images is in progress,
only the images already scanned can be saved.
You can save up to 2000 files of scanned data in both JPEG and PDF Data format.
The folder and file name of scanned data saved on the USB flash drive or the memory card is
as follows:
Folder name (file extension: PDF): CANON_SC\DOCUMENT\0001
Folder name (file extension: JPG): CANON_SC\IMAGE\0001
File name: Running numbers, starting from SCN_0001
File date: 01/01/2008
Importing the Scanned Data Saved on the Memory Card to the Computer
When you import the scanned data saved on the memory card to the computer, import the data after
performing either of the operations below:
-Turning the machine off, then turn it back on.
-Removing the memory card, then reinsert it into the Card Slot.
You can optimize or print the scanned data saved on the memory card using MP Navigator EX. For
details, refer to Importing Images Saved on a Memory Card .
Importing the Scanned Data Saved on the USB Flash Drive to the Computer
You can import the scanned data saved on the USB flash drive to the computer.
After scanning the data, connect the USB flash drive to the computer, then import the data using
Windows Explorer.
You can import the scanned data saved on the USB flash drive to the computer.
After scanning the data, connect the USB flash drive to the computer, then import the data.
Page top
Setting Items
the Machine > Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of the Machine >
Setting Items
Setting Items
Scan document screen
Perform settings in saving scanned data on the USB flash drive or memory card.
1.
Document type
Select the type of the original on the Platen Glass.
2.
Scan size
Select the size of the original on the Platen Glass.
3.
Scan resolution
Select the resolution for scanning.
4.
Data format
Select the data format of the scanned data.
Advanced screen
When you press the left Function button in the Scan document screen, the Advanced screen is
displayed.
1.
Preview
Select to preview the scanned data or not.
2.
Unsharp mask
The outline of small characters or thin objects can be accentuated. Select Unsharp mask ON
if you want to accentuate the outline of the scanned data.
3.
Descreen*1
Setting Items
A printout consists of minute dots to make characters or graphs. Interfering with each dot may
result in uneven shades or a striped pattern. Select Descreen ON if you notice any uneven
shades or a striped pattern on the scanned image.
Note
Even if Descreen is set to ON, some moire effects may remain if Unsharp Mask is set to
ON. In that case, set Unsharp Mask to OFF.
4.
Hide show-through*1
Characters on the back may show through when scanning a thin document such as a
newspaper. Select Hide show through If characters seem to show through on the scanned
document.
*1 Not available when scanning a photo.
Page top
Deleting Scanned Data on USB Flash Drive/Memory Card
the Machine > Saving Scanned Data on the USB Flash Drive/Memory Card Using the Operation Panel of the Machine >

You can delete scanned data on the USB flash drive or memory card using the Operation Panel.
1. Select
2. Insert the USB flash drive in the Direct Print Port or the memory card in the Card
Slot.
Important
You cannot use the USB flash drive and memory card at the same time.
3. Select USB flash drive or Memory card, then press the OK button.
4. Select Delete scanned data, then press the OK button.
The file list is displayed.
5. Select the file to delete, then press the OK button.

Note
You can preview the file to delete or switch the file list between PDF and JPEG.
Only the first page of the image is displayed on the LCD.
1. Change display
Switches the display between the list and the preview.

2. Switch data list
Switches the display between the PDF data list and the JPEG data list.
6. Select Yes on the confirmation screen, then press the OK button.

7. Press the OK button again.
The machine starts deleting the file.
Page top
Advanced Guide > Scanning > Saving Scanned Data to PC Using the Operation Panel of the Machine

Machine
Page top
Advanced Guide > Scanning > Saving Scanned Data to PC Using the Operation Panel of the Machine > Saving Scanned
Data to PC Using the Operation Panel of the Machine

Machine
You can scan images using the Operation Panel of the Machine.
Important
If the software (MP Navigator EX) is not yet installed, refer to your setup manual.
Do not insert or remove USB cables when scanning images with the machine, or when the
computer is in the sleep or standby mode.
1.
Set the Starting application.

You need to set MP Navigator EX as the starting application software in Image Capture under
Applications of Mac OS X.
This operation is not necessary for Mac OS X v.10.4.x.
If you are using Mac OS X v.10.3.9:
Select Applications on the Go menu, then double-click the Image Capture icon. Click Options at the
lower left of the scanner window, select MP Navigator EX 2 in Application to launch when the
scanner button is pressed, then click OK. To quit Image Capture, select Quit Image Capture on the
Image Capture menu.
Important
If Options is not displayed, select Preferences on the Image Capture menu, click Scanner, and
click Use TWAIN software whenever possible to clear the option. Then quit Image Capture and
restart it.

3. Load the original on the Platen Glass.
Note
Refer to Placing Documents for how to load the Original on the Platen Glass.
4. Select
The screen for selecting to which you save the data is displayed.
5. Select PC, then press the OK button.

The document type selection screen is displayed.
6. Select the document type, then press the OK button.

Auto detect
The machine detects the type of the original on the Platen Glass automatically and the image is
saved in the optimized data.
Proceed to step 8.
Document
Scans the original on the Platen Glass applying the optimized settings for scanning a document.
Photo
Scans the original on the Platen Glass applying the optimized settings for scanning a photo.
Important
Make sure that the document has been loaded correctly according to the document type that
you have selected.
7. If you selected Document or Photo in step 6, select the file format, then press the
OK button.
Save to PC:
The original is scanned and saved.

Save as PDF file:
The original is scanned and saved as a PDF file. This item can be selected only when Document
has been selected on the document type selection screen.
Attach to E-mail:
The original is scanned, and the image is attached to an e-mail using the e-mail application
software.
Open with application:
The original is scanned and displayed on the registered application software.
Note
Options for scan operations can be specified in MP Navigator EX. For details, refer to Selecting
a Response to Commands from the Operation Panel Using MP Navigator EX .
8. Press the Color or Black button.

The settings configured from MP Navigator EX apply when scanning.
Remove the original on the Platen Glass after scanning is complete.
9.
To specify MP Navigator EX 2.0

If you are using Windows Vista:
The program selection screen may be displayed after pressing the Color or Black button. In this
case, select MP Navigator EX Ver2.0 and click OK.
You can set MP Navigator EX to launch whenever pressing the Color or Black button. For details,
refer to Selecting a Response to Commands from the Operation Panel Using MP Navigator EX .
If you are using Windows XP:
The program selection screen may be displayed after pressing the Color or Black button for the first
time. In this case, specify MP Navigator EX 2.0 as the application software to use, select Always use
this program for this action, then click OK. From the next time, MP Navigator EX is automatically
started.
Important
If the position or size of an image is not scanned in correctly depending on the type of the
original, refer to Scanning Photos and Documents and change the MP Navigator EX Document
Type and Document Size settings to match the original being scanned.
Note
The operation to be performed after scanning the original depends on the scan operation
setting you have selected in step 6. For details on how to modify the operation settings, refer to
Selecting a Response to Commands from the Operation Panel Using MP Navigator EX .
If You Want to Edit or Print the Scanned Images

MP Navigator EX enables you to edit the scanned images, such as optimizing or trimming.
You can also start application software from MP Navigator EX to edit or print the scanned images.
Let's Try Scanning
If You Want to Scan Originals with Advanced Settings

ScanGear enables you to scan originals with advanced settings such as the resolution.
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
Note
You can use a TWAIN- or WIA- (Windows Vista and Windows XP only) compliant application
software and the Control Panel (Windows Vista and Windows XP only) to scan originals with
this machine.
For details, refer to Other Scanning Methods .
Page top
Advanced Guide > Scanning > Scanning Images > Appendix: Various Scan Settings

Specifying how to respond when scanning using the Operation Panel of the machine
Selecting a Response to Commands from the Operation Panel Using MP Navigator EX

Page top
Selecting a Response to Commands from the Operation Panel Using MP N... Page 370 of 758 pages
Advanced Guide > Scanning > Scanning Images > Appendix: Various Scan Settings > Selecting a Response to
Commands from the Operation Panel Using MP Navigator EX
Selecting a Response to Commands from the Operation Panel

MP Navigator EX enables you to specify the response resulting from pressing the Color Start or Black
Start button on the machine. You can specify the response individually for each event.
1. Start MP Navigator EX.

2. Click Preferences.
The Preferences dialog box opens.

Note
The Preferences dialog box can also be opened by clicking Preferences in the One-click Mode
screen.
3. On the Scanner Button Settings tab, specify Event and Actions.
Selecting a Response to Commands from the Operation Panel Using MP N... Page 371 of 758 pages
Note
See the section below for details.

4. Click OK.
The operation will be performed according to the settings when you press the Color Start or Black
Start button on the machine.
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software

Let's Try Scanning


Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > What Is MP Navigator EX (Supplied
Scanner Software)?

MP Navigator EX is an application that enables you to easily scan photos and documents. It is suitable
even for beginners.
What You Can Do with this Software

This software allows you to scan multiple documents at one time, or scan images larger than the Platen.
You can also save scanned images, attach them to e-mail or print them using the supplied applications.
Screens
Main Menus
There are two types of MP Navigator EX Main Menu: Navigation Mode screen and One-click Mode screen.

You can start various tasks from the Navigation Mode screen, including simple scanning, scanning
using ScanGear (scanner driver), and enhancing/correcting images.

You can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon in
the One-click Mode screen.
Note
Click
(Switch Mode) to switch to the Navigation Mode screen.
Scan/Import Window
Use the Scan/Import window to scan photos and documents, or import images saved on memory cards.
View & Use Window

Use the View & Use window to select what you want to do with the scanned images.
Note
MP Navigator EX may not start from a button on the machine. In that case, restart the computer.
Use the default display font size of the OS. Otherwise, software screens may not appear correctly.
Page top
Let's Try Scanning
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning
Let's Try Scanning

Try scanning using MP Navigator EX.
Scanning documents, photos, magazines, etc. from the Platen

Scanning two or more photos (small documents) at one time

Scanning images larger than the Platen
Scanning Images Larger than the Platen (Stitch Assist)

Scanning easily according to purpose (scan and save, attach to e-mail, etc.)

Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Starting MP
Navigator EX
1. Double-click
MP Navigator EX 2.0 icon on the desktop.
MP Navigator EX starts.
Note
Alternatively, from the Start menu, select (All) Programs > Canon Utilities > MP Navigator EX 2.0
> MP Navigator EX 2.0.
Starting One-click Mode
1. Click
at the bottom left of the screen.
The One-click Mode screen appears.
Note
Select the Show this window at startup checkbox in the Navigation Mode screen to always open
the Navigation Mode screen at startup. If this checkbox is not selected, the last used screen
appears at startup.
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning Photos
and Documents

Scan photos and documents placed on the Platen.
1. Start MP Navigator EX and open the Navigation Mode screen.

2. Point to Scan/Import and click Photos/Documents (Platen).
3. Place the document on the Platen, then select Document Type.

Placing Documents
Note
When you select Magazine(Color), the Descreen function will be enabled and scanning takes
longer than usual. To disable the Descreen function, deselect the Descreen checkbox in the
Scan Settings dialog box.
Select Text(OCR) to extract the text in the image and convert to editable text data using MP
Navigator EX.
4. Click Specify... and specify the document size and resolution as required.
The Scan Settings Dialog Box (Photos/Documents) opens.
Note
When scanning a large document (such as an A4 photo), align its corner with the corner at the
arrow of the platen and specify the document size in the Scan Settings dialog box.
5. Click Scan.
Scanning starts.
When scanning is completed, the Scan Complete dialog box opens. Select Scan or Exit. Select
Scan to scan the next document, or select Exit to end.
The scanned images appear in the Thumbnail window.
6. Edit the scanned images as required.

Use Edit Tools to rotate images, select a part of an image, etc.
See the Edit Tools in " Photos/Documents (Platen) Screen (Scan/Import Window) " for details.
Note
First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use
Shift + arrow keys to select multiple images.
7. Save the scanned images.

Saving
Saving as PDF Files
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning
Multiple Documents at One Time

You can scan two or more photos (small documents) at one time by setting Document Size to Auto
Detect (Multiple Documents) in the Scan Settings dialog box of MP Navigator EX.
Important
The following types of documents cannot be cropped correctly.

- Documents smaller than 1.18 inches (3 cm) square
- Photos that have been cut to various shapes
The following types of documents may not be cropped correctly. In that case, start ScanGear
(scanner driver), then adjust the cropping frame on the Advanced Mode tab and scan again.
- Photos that have a whitish border
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
1. Place the document on the Platen.

Placing Documents

4. Select Document Type according to the document to be scanned.
5. Click Specify....
6. Select Auto Detect (Multiple Documents) for Document Size and click OK.
7. Return to the Scan/Import window and click Scan.

Multiple documents are scanned at one time.
The scanned images appear in the Thumbnail window.
8. Edit the scanned images as required.

Use Edit Tools to rotate images, select a part of an image, etc.
See the Edit Tools in " Photos/Documents (Platen) Screen (Scan/Import Window) " for details.
Note
First select images to edit. (Selected images are outlined in orange.) Drag the mouse or use
Shift + arrow keys to select multiple images.

Saving
Saving as PDF Files
Note
If you want to preview the images before scanning, start ScanGear (scanner driver) and use the
Advanced Mode tab.
Scanning Multiple Documents at One Time in Advanced Mode
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Scanning Images
Larger than the Platen (Stitch Assist)

Stitch Assist allows you to scan the left and right halves of a large document separately and combine the
scanned images back into one image. You can scan documents that are up to twice as large as the
Platen.

Note
You can complete from scanning to saving, etc. at one time by simply clicking the
corresponding icon in the One-click Mode screen. Stitch Assist is available from the One-click
Mode screen as well, by changing the document size. Click the corresponding icon and select
Stitch Assist for Document Size. Then skip ahead to Step 5.
3. Select Document Type according to the document to be scanned.
4. Click Specify....

Select Stitch Assist for Document Size, then specify Scanning Resolution as required.
5. Return to the Scan/Import window and click Scan.

The Stitch-assist window opens.
6. Place the left half of the document face-down on the Platen.

7. Click Scan.
The left half of the document is scanned and appears in the Stitch-assist window.
8. Place the right half of the document face-down on the Platen.

9. Click Scan.
The right half of the document is scanned.
10. Adjust the scanned image as required.

Use the icons to swap the left and right halves, rotate the image 180 degrees or enlarge/reduce the
image.
(Swap Left & Right)
Swaps the left and right halves.

Important
This function is not available while the image is enlarged/reduced.

Rotate 180
Rotates right half of the image 180 degrees.

Important
This function is not available while the image is enlarged/reduced.
(Enlarge)
Enlarges the displayed image.

(Reduce)
Reduces the displayed image.

(Full-screen)
Enlarges/reduces the image to display it full-screen.

Note
Enlarge/Reduce/Full-screen does not affect the actual size of the scanned image.
When the document is scanned upside down, the image displayed in the Stitch-assist window
will also be upside down. Click Rotate 180 to rotate the image to the correct orientation.
You can drag the right half of the image from right to left or up and down to adjust the position.
If the left and right halves do not match due to a slanted document, place the document
correctly and click Back, then scan again.
11. Click Next.

12. Drag the mouse to specify the area to be saved, then click OK.
The combined image appears in the Thumbnail window.


Saving
Saving as PDF Files
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Let's Try Scanning > Easy Scanning
with One-click

You can complete from scanning to saving, etc. at one time by simply clicking the corresponding icon.

Placing Documents
2. Start MP Navigator EX.

The MP Navigator EX Navigation Mode screen or One-click Mode screen appears.

Note
Skip ahead to Step 4 if One-click Mode screen is open.
3. Point to One-click.
4. Click the corresponding icon.

Note
See the corresponding sections below for details on each icon.

Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions

With MP Navigator EX, you can correct/enhance scanned images beautifully, and search saved images
quickly.
Correcting/enhancing images automatically

Correcting/enhancing images manually

Adjusting color characteristics such as brightness and contrast
Adjusting Images
Searching for lost images
Searching Images
Classifying and sorting images

Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Useful MP Navigator EX Functions >

MP Navigator EX will analyze and correct/enhance scanned images automatically.
1. Scan documents into MP Navigator EX and save them, then open the View & Use
window from the Navigation Mode screen and select the photos you want to correct/
enhance.
Note
See "Let's Try Scanning " to scan images into MP Navigator EX.
You can also select images saved on a memory card or computer.
2. Click Edit/Convert, then click Fix photo images on the list.
The Correct/Enhance Images window opens.

Note
The Correct/Enhance Images window can also be opened by clicking

(Image Correction/
Enhancement) on the Toolbar or in the Zoom in dialog box. In that case, only the target image
(outlined in orange) can be corrected/enhanced.
3. Select the image you want to correct/enhance from the thumbnail list.
The selected image appears in Preview.
Note
If you selected only one image in the View & Use window, the thumbnail list does not appear
and only the preview image appears.

5. Click Auto Photo Fix, Face Sharpener or Digital Face Smoothing.
Auto Photo Fix
Analyzes the image and makes suitable corrections automatically.

Face Sharpener


Note
The Face Sharpener and Digital Face Smoothing effect levels can be changed using the slider
that appears by clicking the corresponding buttons.
Once image is corrected with Auto Photo Fix and saved, it cannot be corrected again with Auto
Photo Fix. Auto Photo Fix may not be available for images edited using an application, digital
camera, etc. manufactured by other companies.
6. Click OK.
The entire image is corrected/enhanced automatically and
upper left of the thumbnail and preview image.
(Correct/Enhance) appears on the
Note
Click Reset Selected Image to undo the correction/enhancement.

Select the Apply to all images checkbox to correct/enhance all selected images.

You can save corrected/enhanced images as new files.
Note
To save only the images you like, select them and click Save Selected Image. To save all
images, click Save All Corrected Images.
The file format of corrected/enhanced images is JPEG/Exif.
Adobe RGB images are saved as sRGB images.
8. Click Exit.
Note
The corrections/enhancements will be lost if you exit before saving corrected/enhanced

images.
Page top

You can correct/enhance scanned images manually.
window from the Navigation Mode screen and select the photos you want to correct/
enhance.
Note

Note

(Image Correction/
3. Select the image you want to correct/enhance from the thumbnail list.
Note

5. Click Face Brightener, Face Sharpener, Digital Face Smoothing or Blemish
Remover.
Face Brightener
Brightens dark faces in backlit photos.

Face Sharpener


Blemish Remover
Removes moles.
Note
(Cross).
6. Drag to select the area you want to correct/enhance, then click OK that appears
over the image.
The portion in and around the selected area is corrected/enhanced and

Enhancement) appears on the upper left of the thumbnail.
(Correction/
Note
For Face Brightener, Face Sharpener and Digital Face Smoothing, you can drag to rotate the
rectangle.
Click Undo to undo the latest correction/enhancement.
The Face Brightener, Face Sharpener and Digital Face Smoothing effect levels can be
changed using the slider that appears by clicking the corresponding buttons.
Click Reset Selected Image to undo the correction/enhancement.

You can save corrected/enhanced images as new files.
Note
8. Click Exit.
Note
The corrections/enhancements will be lost if you exit before saving corrected/enhanced

images.
Page top
Adjusting Images
Adjusting Images
Adjusting Images
window from the Navigation Mode screen and select the photos you want to adjust.
Note

Note

(Image Correction/
3. Select the image you want to adjust from the thumbnail list.
Adjusting Images
Note
4. Click Manual, then click Adjust.
5. Move the slider of the item you want to adjust and set the effect level.
Brightness
Adjusting Images
Adjusts the overall image brightness. Adjust the brightness when the image is too dark or too
bright.
Contrast
Adjusts the contrast of the image. Adjust the contrast when the image is flat due to lack of
contrast.
Sharpness
Emphasizes the outline of the subjects to sharpen the image. Adjust the sharpness when the
photo is out of focus or text is blurred.
Blur

Removes show-through of text from the reverse side or removes the base color. Adjust the showthrough level to prevent text on the reverse side of thin document or the base color of the
document from appearing on the image.
Note
Click Defaults to reset all adjustments.

You can save adjusted images as new files.
Note
7. Click Exit.
Note
The adjustments will be lost if you exit before saving adjusted images.
Page top
Searching Images
Searching Images
Searching Images
In the View & Use window of the Navigation Mode screen, you can search images saved on your
computer and open them in MP Navigator EX. Opened images can be printed, edited, etc.
Note
Search images in My Box (Scanned/Imported Images), Recently Saved Images or a selected folder
and its subfolders. You can also specify folder and search in Specify Folder.
See "Starting MP Navigator EX" to start MP Navigator EX.
Quick Search
In
on the Toolbar, enter a word or phrase included in the file name, Exif
information or PDF text of the image you want to search for, then click
Maker, Model, Description and User Comment is searched.
. For Exif information, text in
Advanced Search
Click Search on the left of the screen to open search options. Enter information of the image you want to
search for, then click Start Search.
Searching Images
Search in
If you know where to look for, select the drive, folder or network from Specify Folder.
File Name
If you know the file name, enter it.

A word or phrase in the file
Enter a word or phrase included in the items selected in More Advanced Options.
Note
For PDF files, you can only search for those created with MP Navigator EX. You cannot search
PDF files created or edited in other applications. Also, searching PDF files is available only
when keyword search is set.
For details of creating PDF files that enables keyword search, see " PDF Settings Dialog Box ."
Password-protected PDF files cannot be searched.
Categories
You can search for images by category.
Modified Date
To search for files that have been updated in a specific time period, enter the first and last dates of
the period.
Shooting Date
To search for images captured in a specific time period, enter the first and last dates of the period.
Note
Captured date is the date and time of data creation, which are included in the document's Exif
information.
More Advanced Options
A word or phrase in the file
In A word or phrase in the file, select the items to search. If you select the Exif information
checkbox, text in Maker, Model, Description and User Comment is searched. If you select the
PDF text checkbox, text in PDF files is searched.
Note
Searching Images
Text in password-protected PDF files cannot be searched.

Search subfolders
Select this checkbox to search subfolders.

Case sensitive
Select this checkbox to match case.

Match all criteria
Searches for files that meet all the specified criteria.

Match any criteria
Searches for files that meet any of the specified criteria.

Start Search
Start search.
Note
See "View & Use Window" for details on the View & Use window.
Page top

Display images scanned with MP Navigator EX by category. You can classify unclassified images
automatically, and also create custom categories. You can drag and drop an image to move it from one
category to another.
window from the Navigation Mode screen.
Note
2. In
(Sort by), select Categories.
Images are automatically sorted by category and appear in the Thumbnail window.
Images are sorted into the following categories.

Photos: Portrait, Others
Documents: Business Card, Hagaki, Standard Size, PDF File, Others
Custom categories: Displays your custom categories.

To create custom categories, see " Creating Custom Categories ."
Unclassified: Displays images that have not yet been classified.

Note
Click Classify Images to classify images displayed in Unclassified automatically. Click Cancel
to stop.
Classification may take time if there are many images to classify.
Important
Even if you classify images saved in removable media such as USB flash drive and external hard
disk, the classification information will be deleted once you remove the media. From the next time,
the images are classified to Unclassified.
Note
Some images may not be detected correctly and thus may be classified into wrong categories. In
that case, drag and drop the image to the correct category.
Images cannot be classified when Recently Saved Images is selected in the View & Use window.
You can search for images by category. See " Searching Images " for details.
Creating Custom Categories
1. In the View & Use window, sort images by category and click Edit Custom
Categories.
The Edit Custom Categories dialog box opens.
2. Click Add to List.

The Add Category dialog box opens.
3. Enter Category name and click OK.

Important
You can create up to 20 custom categories.

Up to 50 single-byte characters can be used for a category name.
Note
Double-click a created category to open the Change Category Name dialog box in which you
can change the category name.
Select a custom category and click Delete to delete it.
Note
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX

You can scan images using MP Navigator EX and edit or print the saved images.
See the corresponding sections below for details on saving scanned images.
Saving scanned images to computer
Saving
Saving scanned image as PDF Files
Saving as PDF Files
See the corresponding sections below for details on using images/files.

Creating PDF files from scanned images and editing PDF files

Printing multiple scanned images at one time or printing at specific size, quality, etc.
Printing Documents
Printing scanned photos
Printing Photos
Sending scanned images via e-mail
Sending via E-mail

Correcting/enhancing scanned images or converting them to text
Editing Files
Setting passwords for created PDF files

Page top
Saving
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Utilizing Images in MP Navigator EX >
Saving
Saving
Save images scanned with MP Navigator EX to a computer.
1. Select the checkboxes of the images you want to save, then click Save.
2. In the Save dialog box, specify the save settings.

Specify the destination folder, file name and file type.
Important
You cannot select JPEG/Exif when Document Type is Text(OCR).

Note
See "Save Dialog Box " for details on the Save dialog box.
By default, the following folders are specified as the destination folders.
Windows Vista: MP Navigator EX folder in Picture folder
Windows XP: MP Navigator EX folder in My Pictures folder
Windows 2000: MP Navigator EX folder in My Pictures folder
3. Click Save.
Scanned images are saved according to the settings.
To further use/edit the scanned images on MP Navigator EX, click Open saved location in the Save
Complete dialog box.
Printing Documents
Saving

Printing Photos
Sending via E-mail
Editing Files
Page top
Saving as PDF Files
Saving as PDF Files
Saving as PDF Files

Save images scanned with MP Navigator EX as PDF files.
1. Select the checkboxes of the images you want to save, then click Save as PDF file.
2. In the Save as PDF file dialog box, specify the save settings.
Specify the file type, file name and destination folder.
Select from the following PDF file types:

PDF
Save each of the selected images as a separate PDF file.

PDF(Multiple Pages)
Save multiple images in one PDF file.

Important
PDF(Multiple Pages) is displayed when multiple images are selected.
Saving as PDF Files
PDF(Add Page)
Add the scanned images to a PDF file. The images are added to the end of the PDF file. You
cannot rearrange the pages of the PDF file to which the images are added.
Important
Images can only be added to PDF files created with MP Navigator EX. You cannot specify
PDF files created with other applications. PDF files edited in other applications cannot be
specified as well.
If a password-protected PDF file is edited, the passwords will be deleted. Reset the
passwords.
Note
See "Save as PDF file Dialog Box " for details on the Save as PDF file dialog box and Set....
By default, the following folders are specified as the destination folders.
You can set passwords for PDF files.
3. Click Save.
Scanned images are saved according to the settings.
To further use/edit the scanned images on MP Navigator EX, click Open saved location in the Save
Complete dialog box.
Printing Documents
Printing Photos
Sending via E-mail
Editing Files
Page top

Create/edit PDF files using MP Navigator EX. After scanning documents and saving them, open the View
& Use window to create PDF files and add/delete pages, rearrange the page order, etc.
Note
Creating/Editing PDF Files with MP Navigator EX
1. Select files and click PDF.

2. Click Create/Edit PDF file on the list.
Important
You can select PDF, JPEG, TIFF and BMP files.

For PDF files, you can only edit those created with MP Navigator EX. You cannot edit PDF files
created with other applications. PDF files edited in other applications cannot be edited as well.
If a password-protected PDF file is selected, you will be prompted to enter the password.
3. Add/delete pages as required.

To add an existing file, click Add Page and select the file. To delete a page, select it and click Delete
Selected Pages.
Note
You can add PDF, JPEG, TIFF and BMP files.

When adding a password-protected PDF file, you will be prompted to enter the password.
4. Rearrange the page order as required.

Use the icons to rearrange the order. Alternatively, drag and drop the thumbnail to the target location.
Note
See "Create/Edit PDF file Window " for details on the Create/Edit PDF file window.
5. Click Save Selected Pages or Save All Pages.

The Save as PDF file dialog box opens.
Important
You cannot save images scanned at 10501 pixels or more in the vertical and horizontal
directions.
passwords in the Save as PDF file dialog box.
Note
See "Save as PDF file Dialog Box " for details on the Save as PDF file dialog box.
6. Specify the save settings in the Save as PDF file dialog box, then click Save.
Images are saved according to the settings.
Opening PDF Files in an Application

You can open PDF files created with MP Navigator EX in an associated application and edit or print them.
1. Select PDF files and click PDF.

Important
For PDF files, you can only select those created with MP Navigator EX. You cannot select PDF
files created with other applications. PDF files edited in other applications cannot be selected
as well.
2. Click Open PDF file on the list.

The application associated with the .pdf file extension by the operating system starts.
Important
Password-protected PDF files cannot be opened in applications not supporting PDF security.
3. Use the application to edit/print the file.

For details, refer to the application's manual.
Important
In some applications, the commands (print, edit, etc.) restricted by Permissions Password
may differ from those in MP Navigator EX.
Page top
Printing Documents
Printing Documents
Printing Documents
You can print multiple scanned images at one time, print at specific quality, etc. using MP Navigator EX.
window from the Navigation Mode screen and select images.
Note
2. Click Print, then click Print Document on the list.
Important
If a password-protected PDF file is selected, you will be prompted to enter the password.
3. Specify print settings as required.

In the displayed dialog box, specify print count, quality, scale, etc.
Printing Documents
Important
At 100% Normal-size, some images may be printed small or with some portions cropped. In
that case, select Auto to resize the print in proportion to the paper size.
Note
See "Print Document Dialog Box" for details.
4. Click Print.
Printing starts.
Important
When printing a multiple-page PDF file via Print Document, printing may take time depending
on your computer. In that case, follow these steps and change settings.
1. From the Start menu, select Control Panel.
2. Click Printers.
3. Right-click the icon of your printer and click Properties.
The printer properties dialog box opens.
4. Click the Advanced tab.
5. Select Spool print documents so program finishes printing faster.
6. Select Start printing after last page is spooled.
7. After printing, return the setting on the Preferences tab to Start printing immediately.
Note
To cancel while spooling, click Cancel. To cancel while printing, select the printer icon on the
taskbar and click Cancel Printing.
Page top
Printing Photos
Printing Photos
Printing Photos
You can print photos using MP Navigator EX or an application that accompanies the machine. After
scanning documents and saving them, open the View & Use window to select how you want to print the
photos.
Note
When printing photos using an application that accompanies the machine

You can use an application that accompanies the machine to print scanned photos at high quality or to
layout and print images.
1. Select images and click Print.

2. Click Print Photo or Print Album on the list.
Easy-PhotoPrint EX starts. See " Printing Photos" for details.
Note
If Easy-PhotoPrint EX is not installed, print with MP Navigator EX.
When printing photos using MP Navigator EX
1. Select images and click Print.

2. Click Print Photo on the list.
3. Specify print settings as required.
In the displayed dialog box, specify paper size, print count, etc.
Printing Photos
Note
See "Print Photo Dialog Box " for details.
4. Click Print.
Printing starts.
Note
Page top
Sending via E-mail
Sending via E-mail
Sending via E-mail

Send scanned images via e-mail.
Important
MP Navigator EX is compatible with the following e-mail software programs:

- Windows Mail (Windows Vista)
- Outlook Express (Windows XP/Windows 2000)
- Microsoft Outlook
- EUDORA
- Netscape Mail
(If an e-mail software program does not operate properly, check that the program's MAPI is enabled.
To enable MAPI, refer to the manual of the e-mail software program.)
window from the Navigation Mode screen and select images.
Note
2. Click Send, then click Attach to E-mail on the list.
3. Set save options as required.

Specify the destination folder and file name.
Sending via E-mail
Important
You can select a compression type when sending JPEG images via e-mail. Click Set... to open
a dialog box and select High(Low Compression), Standard or Low(High Compression).
Note
See "Send via E-mail Dialog Box " for details on the Send via E-mail dialog box.
4. Click OK.
Files are saved according to the settings, and the e-mail software program starts.
5. Specify the recipient, enter the subject and message, then send e-mail.
For details, refer to the manual of the e-mail software program.
Page top
Editing Files
Editing Files
Editing Files
You can edit images or convert them to text using MP Navigator EX or an application that accompanies
the machine. After scanning documents and saving them, open the View & Use window to select what
you want to do with the images.
Note
Correcting photo images

You can correct/enhance images in the Correct/Enhance Images window.
1. Select images and click Edit/Convert.

2. Click Fix photo images on the list.
3. Correct/enhance images in the Correct/Enhance Images window.

Note
See the corresponding sections below for correcting/enhancing images.
Converting documents to text

Scan text in scanned magazines and newspapers and display it in Notepad (included with Windows).
1. Select images and click Edit/Convert.
Editing Files
2. Click Convert to text file on the list.

Notepad (included with Windows) starts and editable text appears.
Note
Only text written in languages that can be selected on the General tab can be extracted to
Notepad (included with Windows). Click Set... on the General tab and specify the language
according to the language of the document to be scanned.
General Tab
Text displayed in Notepad (included with Windows) is for guidance only. Text in the image of
the following types of documents may not be detected correctly.
- Documents containing text with font size outside the range of 8 points to 40 points (at 300 dpi)
- Slanted documents
- Documents placed upside down or documents with text in the wrong orientation (rotated
characters)
- Documents containing special fonts, effects, italics, or hand-written text
- Documents with narrow line spacing
- Documents with colors in the background of text
- Documents containing multiple languages
Page top

Set passwords for opening, editing and printing PDF files.
You can set two passwords: one for opening the file and one for editing/printing it.
Important
Internet Explorer 5.5 Service Pack 2 or later is required to use this function.
You will not be able to open/edit the file if you forget the password. Record your passwords in a safe
place for future reference.
Password-protected PDF files cannot be opened in applications not supporting PDF security.
In some applications, the commands (print, edit, etc.) restricted by Permissions Password may
differ from those in MP Navigator EX.
Password-protected PDF files cannot be searched by text from the View & Use Window .
1. Scan documents into MP Navigator EX, then click Save as PDF file.
Alternatively, edit existing files in the Create/Edit PDF file window, then click Save
Selected Pages or Save All Pages.
The Save as PDF file dialog box opens.
Note
See "Let's Try Scanning " to scan images.

See "Creating/Editing PDF Files " to create PDF files from existing images or to edit files.
Passwords cannot be set when images are automatically saved after scanning, such as when
scanning from the One-click Mode screen or scanning using the Operation Panel of the
machine.
2. Select the Password security settings checkbox.
The Password Security -Settings dialog box opens.

Note
You can also open the Password Security -Settings dialog box by clicking Set..., then selecting
Password Security for Security in the PDF Settings dialog box.
3. Select the Require a password to open the document or Use a password to restrict
printing and editing of the document and its security settings checkbox, then enter a
password.
Important
Up to 32 single-byte alphanumeric characters can be used for the password. Passwords are
case sensitive.
Note
Select both checkboxes to set both Document Open Password and Permissions Password.
You cannot use the same password for both.
4. Click OK.
The Confirm Document Open Password or Confirm Permissions Password dialog box opens.
Document Open Password
Permissions Password
5. Re-enter the password and click OK.

The Save as PDF file dialog box returns.
Important
If you close the Save as PDF file dialog box without clicking Save, the settings in the Password
Security -Settings dialog box will be deleted.
Passwords are deleted once the file is edited. Reset the passwords when saving edited files.
Note
If you set the passwords via the PDF Settings dialog box, the PDF Settings dialog box returns.
Click OK. The Save as PDF file dialog box returns.
6. Click Save.
Files are saved according to the settings.
Related Topic
Page top

Enter a password to open or edit/print password-protected PDF files.
Password entry method varies by operation. The following procedures are examples only.
Important
You can open, edit or print only PDF files whose passwords were set with MP Navigator EX. You
cannot edit PDF files edited in other applications or whose passwords were set with other
applications. Only MP Navigator EX version 1.1 and 2.0 or later supports opening, editing and
printing password-protected PDF files.
Internet Explorer 5.5 Service Pack 2 or later is required to open, edit or print password-protected
PDF files.
Passwords are case sensitive.
Entering a Password to Open a File
1. In the View & Use window, select the PDF file you want to open and click
Zoom
in.
Alternatively, double-click the PDF file.
Note
Only the Document Open Password will be required. The Permissions Password will not be
required.
If the Zoom in dialog box with a lock icon opens, click Enter Password.
2. The Password dialog box opens. Enter the password and click OK.
The PDF file opens in the Zoom in dialog box.

Important
To reopen the file after closing the Zoom in dialog box, re-enter the password.
Entering a Password (Permissions Password) to Edit or Print a File
1. In the View & Use window, select PDF files and click PDF or Print.
2. To create a PDF file or edit the file, select Create/Edit PDF file on the list. To print
the file, click Print Document.
In the Password dialog box, you will be prompted to enter a password.
Important
If the Document Open Password is set as well, the Document Open Password will be
required, then the Permissions Password will be required.
3. Enter the password and click OK.

The corresponding dialog box opens.
Important
passwords.
Related Topic
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens
Learn about the screens and functions of MP Navigator EX.

Photos/Documents (Platen) Screen (Scan/Import Window)
Save Dialog Box

View & Use Window
Custom Scan with One-click Tab / One-click Mode Screen

PDF Dialog Box
Mail Dialog Box

OCR Dialog Box
Custom Dialog Box

General Tab

Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens >

This is one of the startup screens of MP Navigator EX.
Point to the icon at the top of the screen to display each tab. Use each tab depending on what you want to
do.
Scan/Import
You can scan photos and documents, or import images saved on memory cards.
View & Use
You can open images saved on a computer and print them or attach them to e-mail. You can also edit
them using an application that accompanies the machine.
One-click
(Switch Mode)
Switch to One-click Mode screen. In the One-click Mode screen, you can complete from scanning to
saving, etc. at one time by simply clicking the corresponding icon.
Show this window at startup
Select this checkbox to open the Main Menu at startup. If this checkbox is not selected, the last used
screen appears.
Preferences
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings to
MP Navigator EX functions.
(Guide)
Open this guide.

Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan/
Import Documents or Images Tab

Point to Scan/Import in the Navigation Mode screen to display the Scan/Import Documents or Images
tab.
You can scan photos and documents, or import images saved on memory cards.
Photos/Documents (Platen)
Open the Scan/Import window. Scan photos and documents placed on the Platen.
Memory Card
Open the Scan/Import window with Memory Card selected. Import images saved on memory cards.
(Switch Mode)
screen appears.
Preferences
(Guide)
Open this guide.

Page top
View Use Images on your Computer Tab
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > View &
Use Images on your Computer Tab

Point to View & Use in the Navigation Mode screen to display the View & Use Images on your Computer
tab.
You can open images saved on a computer and print them or attach them to e-mail. You can also edit
them using an application that accompanies the machine.
My Box (Scanned/Imported Images)
Open the View & Use window with My Box (Scanned/Imported Images) selected.
You can open and use images saved in My Box.
My Box is a specific folder for saving images scanned with MP Navigator EX.
Note
The following folders are specified by default.

Specify Folder
Open the View & Use window with Specify Folder selected.
You can open and use images saved in specific folders.
Recently Saved Images
Open the View & Use window with Recently Saved Images selected.
You can open and use images that have been "Scanned/Imported Images", "Attached to E-mail", or
"Sent to Application" recently.
Note
(Switch Mode)
screen appears.
Preferences
View Use Images on your Computer Tab
(Guide)
Open this guide.
Related Topic
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Custom
Scan with One-click Tab

Point to One-click in the Navigation Mode screen to display the Custom Scan with One-click tab.
Save to PC
Scan and save documents. Document type is automatically detected. File format is automatically set.
Files are saved to a computer.
When you click this icon, the Save dialog box opens and you can specify the scan/save settings.
Save as PDF file
Scan documents and save them as PDF files.

When you click this icon, the PDF dialog box opens and you can specify the scan/save and application
settings.
PDF Dialog Box
Attach to E-mail
Scan documents or photos and attach them to e-mail.

When you click this icon, the Mail dialog box opens and you can specify the scan/save and e-mail
software program settings.
Mail Dialog Box
OCR
Scan text documents then extract text in the image and display it in Notepad (included with Windows).
When you click this icon, the OCR dialog box opens and you can specify the scan/save and application
settings.
OCR Dialog Box
Important
For further procedures, refer to the application's manual.

Custom
Scan documents and open them in a specified application. Document type is automatically detected.
When you click this icon, the Custom dialog box opens and you can specify the scan/save and
application settings.
Custom Dialog Box
Important

Start scanning by clicking the button
Select this checkbox and click an icon to start scanning immediately.
(Switch Mode)
Switch to One-click Mode. The One-click Mode screen appears.

screen appears.
Preferences
(Guide)
Open this guide.

Important
The following restrictions apply when you scan with Document Type set to Auto Mode in the Save or
Custom dialog box.
Specify Document Type (other than Auto Mode) to extract the text in the image and convert to
editable text after scanning.
Related Topic
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Photos/
Documents (Platen) Screen (Scan/Import Window)

Point to Scan/Import in the Navigation Mode screen and click Photos/Documents (Platen).
Open this window to scan documents from the Platen.
(1) Settings and Operation Buttons

(2) Toolbar
(3) Thumbnail Window

(4) Selected Images Area
Settings and Operation Buttons

(View & Use)
Click this when you want to open images and PDF files saved on your computer. The View & Use
window opens.
View & Use Window
Displays the screen for scanning photos, documents, magazines and other printed materials.
Memory Card
Click this when you want to import images saved on a memory card. The screen for importing
images from a memory card appears.
Document Type
Select the type of document to be scanned.

Scanning photos: Color Photo or Black and White Photo
Scanning text documents: Color Document, Black and White Document or Text(OCR)
Scanning magazines: Magazine(Color)
Important
You cannot select Document Type if the Use the scanner driver checkbox is selected.
Specify...
Specify the document size, resolution, and other advanced scan settings.
Important
Specify... is not available if the Use the scanner driver checkbox is selected.
Use the scanner driver
Select this checkbox when you want to scan with ScanGear (scanner driver). Use ScanGear
(scanner driver) to correct images and adjust colors when scanning documents.
Scan
Scanning starts.
Note
This button changes to Open Scanner Driver when you select the Use the scanner driver
checkbox.
Open Scanner Driver
ScanGear (scanner driver) starts.

See "ScanGear (Scanner Driver) Screens" for details on ScanGear (scanner driver) screens.
Note
This button changes to Scan when you deselect the Use the scanner driver checkbox.
Clear
Delete all images in the Thumbnail window.

Important
Images not saved on a computer will be deleted. To keep important images, use Save or other
methods to save them to a computer before clicking Clear.
Save
Save the selected images. Click to open the Save Dialog Box and specify the save settings.
Save as PDF file
Save the selected images as PDF files. Click to open the Save as PDF file Dialog Box and specify
the save settings.
Jump to Main Menu
Jump to the Main Menu.
Toolbar
Preferences
The Preferences dialog box opens. In the Preferences dialog box, you can make advanced settings
to MP Navigator EX functions.
(Guide)
Open this guide.

Edit Tools
(Select All)
Selects all images in the Thumbnail window.

(Cancel All)
Cancels all image selections in the Thumbnail window.

(Rotate Left)
Rotates the target image (outlined in orange) 90 degrees counter-clockwise.

(Rotate Right)
Rotates the target image (outlined in orange) 90 degrees clockwise.

(Invert)
Inverts the target image (outlined in orange) horizontally.

(Trimming)
Trims the target image (outlined in orange) in the Thumbnail window. Trimming is the act of
selecting the area you want to keep in a photo and discarding the rest. Click this button to open
the Crop window and specify the trimming frame.
Zoom in
Enlarges the target image (outlined in orange). You can also enlarge the image by doubleclicking it.
(Display Size)
Changes the size of images in the Thumbnail window.

(Sort by)
Sorts the images in the Thumbnail window by category or by date (ascending or descending).
Thumbnail Window
Thumbnail Window
Images scanned from the Platen are displayed.

When you select the checkbox of an image, the image appears in the Selected Images area.
Important
Thumbnails may appear as "?" when there is not enough memory to display the images.
When Images are Sorted by Categories

Open All
Displays all images.

Close All
Hides all images.
Selected Images Area

(Cancel All)
Cancels the selection of all images in the Selected Images area.

(Cancel Selection)
Cancels the selection of the target image (outlined in orange) in the Selected Images area.
Images selected in the Thumbnail window are displayed.
Related Topic
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan
Settings Dialog Box (Photos/Documents)

The Scan Settings dialog box opens when you click Specify... in the Scan/Import window.
In the Scan Settings dialog box, you can make advanced scan settings.
Document Type

Scanning photos: Color Photo or Black and White Photo
Scanning text documents: Color Document, Black and White Document or Text(OCR)
Scanning magazines: Magazine(Color)
Important
To scan correctly, select a document type that matches the document to be scanned.
Document Size
Select the size of the document to be scanned.

When you select Custom, a screen in which you can specify the document size appears. Select a
Units, then enter the Width and Height and click OK.
Important
When you select Auto Detect, the image may not be scanned at the correct position and size. In
that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the
document with the corner at the arrow of the Platen.
See "Placing Documents " for details on how to place documents.
You cannot select Auto Detect (Multiple Documents) or Auto Detect when Document Type is
Text(OCR).
Scanning Resolution
Select the resolution at which to scan documents.

Resolution
Note
The following scanning resolutions can be specified when Document Type is Text(OCR).
300 dpi / 400 dpi
Descreen
Select this checkbox to reduce moire patterns.
Printed photos and pictures are displayed as a collection of fine dots. Moire is a phenomenon where
dots may interfere with each other and cause uneven gradation and a stripe pattern in the image.
Descreen is the function for reducing this moire effect.
Important
You cannot select this checkbox when Document Type is Color Photo, Black and White Photo or
Text(OCR).
Note
Scanning takes longer than usual when you enable Descreen.

Unsharp Mask
Select this checkbox to emphasize the outline of the subjects and sharpen the image.
Important
You cannot select this checkbox when Document Type is Text(OCR).

Prevent show-through of the document
Select this checkbox to sharpen text in a document or reduce show-through in newspapers.

Important
You cannot select this checkbox when Document Type is Color Photo, Black and White Photo or
Text(OCR).
Select this checkbox when Document Type is text document and show-through is apparent in the
scanned image.
Remove gutter shadow
Select this checkbox to correct shadows that appear between pages when scanning open booklets.
Important
Align the document correctly with the marks on the Platen.

Gutter shadows can be corrected only when Document Size is set to a standard size.
You cannot select this checkbox when Document Size is Auto Detect, Auto Detect (Multiple
Documents) or Stitch Assist.
Note
Use ScanGear's Advanced Mode tab to correct gutter shadows when scanning non-standard size
documents or when custom cropping frames are set.
For details, see Gutter Shadow Correction in " Image Settings " (ScanGear's Advanced Mode tab).
Correct slanted document
Select this checkbox to detect the scanned text and correct the angle (within -0.1 to -10 degrees or +0.1
to +10 degrees) of the document.
Important
You cannot select this checkbox when Document Type is Color Photo, Black and White Photo.
You cannot select this checkbox when Document Size is Stitch Assist.
The inclination of the following types of documents may not be corrected, as the text cannot be
detected correctly.
- Documents in which the text lines are inclined more than 10 degrees or the angles vary by line
- Documents containing both vertical and horizontal text
- Documents with extremely large or small fonts
- Documents with small amount of text
- Documents containing figures/images or hand-written text
- Documents containing both vertical and horizontal lines (tables)
Note
Scanning takes longer than usual when you enable Correct slanted document.
Detect the orientation of text documents and rotate images
Select this checkbox to detect the orientation of the document from the scanned text and rotate the
scanned image to the correct orientation. Select the language of the document to be scanned in
Document Language.
Important
This function may not work properly depending on the document language. Only text documents
written in languages that can be selected from Document Language are supported.
The orientation of the following types of documents may not be corrected, as the text cannot be
detected correctly. In that case, select the scanned image in the Thumbnail window of the
Photos/Documents (Platen) Screen (Scan/Import Window) and rotate it with Edit Tools.
- Resolution is outside the range of 300 dpi to 600 dpi
- Font size is outside the range of 8 points to 48 points
- Documents with patterned backgrounds
Note
Scanning takes longer than usual when you enable Detect the orientation of text documents and
rotate images.
Document Language
Select the language of the document to be scanned.

Important
Defaults
Restore the default settings.

Page top
Save Dialog Box
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save
Dialog Box
Save Dialog Box

The Save dialog box opens when you click Save in the Scan/Import window.
In the Save dialog box, you can make settings for saving images to a computer.
Save in
Displays the folder in which to save the scanned images. To change the folder, click Browse... to
specify another one.
Important
When saving to a memory card, enable writing on the Card Slot of the machine. For details on
how to enable writing, refer to " Setting Up the Card Slot as the Memory Card Drive of the
Computer ."
File name
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4 digits
are appended to each file name.
Save as type
Select a file type to save the scanned images.

Select JPEG/Exif, TIFF or BMP.
Important
You cannot select JPEG/Exif when Document Type is Text(OCR).

Set...
You can specify a compression type for JPEG files.

Select High(Low Compression), Standard or Low(High Compression).
Important
This setting is available only when Save as type is JPEG/Exif.

Save to a Subfolder with Current Date
Select this checkbox to create a subfolder in the folder specified in Save in with the current date and
save imported files in it. A subfolder with a name such as "2008_01_01" (Year_Month_Date) will be
created.
If this checkbox is not selected, files are saved directly in the folder specified in Save in.
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save as
PDF file Dialog Box

In the Save as PDF file dialog box, you can make advanced settings for saving scanned images as PDF
files. You can save multiple documents as one PDF file or add pages to a PDF file created with MP
Navigator EX.
Important
You cannot save images scanned at 10501 pixels or more in the vertical and horizontal directions.
Dialog box that opens when Save as PDF file in the Scan/Import window is clicked
Dialog box that opens when Save Selected Pages or Save All Pages is clicked in the
Create/Edit PDF file window
Save as type
Select a PDF file type to save the scanned images.

PDF

PDF(Multiple Pages)

Important
PDF(Multiple Pages) is displayed when multiple images are selected.

PDF(Add Page)
Important
specified as well.
passwords.
Set...
Make advanced settings for creating PDF files.

See "PDF Settings Dialog Box " for details.
Password security settings
Select this checkbox to open the Password Security -Settings dialog box in which you can set
passwords for opening, editing and printing created PDF files.
Add to
This is displayed when you select PDF(Add Page) for Save as type and specify the PDF file to which
images are added. To change the file, click Browse... to specify another one.
Important
Images can only be added to PDF files created with MP Navigator EX. You cannot specify PDF
files created with other applications. PDF files edited in other applications cannot be specified
as well.
File name
Enter the file name of the image to be saved (up to 32 characters). When saving multiple files, 4
digits are appended to each file name.
Save in
Displays the folder in which to save the PDF files. To change the folder, click Browse... to specify
another one.
created.
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > PDF
Settings Dialog Box

In the PDF Settings dialog box, you can specify the PDF compression type and other advanced settings
for creating PDF files.
Enable keyword search
Select this checkbox to convert characters in a document to text data. This will enable an easy search
by keyword.
Document Language

scanned image to the correct orientation.
Important
detected correctly.
Important
detected correctly.
PDF Compression
Select a compression type for saving.

Standard
It is recommended that you normally select this setting.

High
Compresses the file size when saving, allowing you to reduce the load on your network/server.
Note
The following images can be compressed with high efficiency.

- Images with resolutions within the range of 75 dpi to 600 dpi
Security
Set passwords for opening, editing and printing the created PDF files.
Important
Internet Explorer 5.5 Service Pack 2 or later is required to use this function.
This function is not available when images are automatically saved after scanning, such as when
scanning from the One-click Mode screen or scanning using the Operation Panel of the machine.
Note
Select Password Security and set passwords in the Password Security -Settings dialog box.
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Memory
Card Screen (Scan/Import Window)

Point to Scan/Import in the Navigation Mode screen and click Memory Card, or click Memory Card in the
Scan/Import window.
Open this window to import images (including PDF files scanned with the operation pannel) saved on a
memory card.

(2) Toolbar


(View & Use)
Click this when you want to open images and PDF files saved on your computer. The View & Use
window opens.
View & Use Window
Click this when you want to scan photos, documents, magazines and other printed materials. The
screen for scanning photos and documents appears.
Memory Card
Displays folders of images and PDF files (grouped by year, year/month and year/month/date) on a
memory card in tree view. Select a folder to display its contents in the Thumbnail window to the right.
File date is the captured or updated date.
Import
Import the selected images and open them in the View & Use window.
View & Use Window
Jump to Main Menu
Toolbar
Preferences
(Guide)
Open this guide.

Edit Tools
(Select All)

(Cancel All)

Zoom in
Enlarges the target image (outlined in orange). You can also enlarge the image by doubleclicking it. You can check all pages when you select a PDF file.
(Refresh)
Refreshes the Thumbnail window contents.

(Display Size)

(Sort by)
Sorts the images in the Thumbnail window by date (ascending or descending).
Thumbnail Window
Thumbnail Window
Images saved on the memory card are displayed by year or year/month.


(Cancel All)

(Cancel Selection)
Related Topic
Page top
View Use Window
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > View &
Use Window
View & Use Window

In the Navigation Mode screen, point to View & Use and click My Box (Scanned/Imported Images), Specify
Folder or Recently Saved Images.
Open this window to display or use scanned images or images saved on a computer.
Important
For PDF files, only those created with MP Navigator EX are displayed. You cannot display PDF files
created with other applications. PDF files edited in other applications cannot be displayed as well.

(2) Toolbar


(Scan/Import)
Click this when you want to scan photos, documents, magazines and other printed materials. The
Scan/Import window opens.
My Box (Scanned/Imported Images)
Displays folders of images (grouped by year, year/month, year/month/date and category) in My Box in
tree view. Select a folder to display its contents in the Thumbnail window to the right.
Image date is the scanned, captured or updated date.
Specify Folder
View Use Window
Displays all hard disks and folders in tree view. Select a folder to display images in the Thumbnail
window to the right.
Recently Saved Images
Images that have been "Scanned/Imported Images", "Attached to E-mail" or "Sent to Application"
recently are displayed in tree view by date. For "Scanned/Imported Images", "From Scanner" and
"From Memory Card" are displayed separately. Select a Year/Month/Day folder to display images by
date in the Thumbnail window to the right.
Image date is the scanned or sent date.
Search
The advanced search options open.
Searching Images
Task Button Area
Specify what to do with the selected images. See the corresponding sections below for details on
each button.
Printing Documents
Printing Photos
Sending via E-mail
Editing Files
Note
The buttons in the Task Button area are displayed when the corresponding applications are
installed.
Jump to Main Menu
Toolbar
Preferences
(Guide)
Open this guide.

Edit Tools
(Select All)

(Cancel All)

(Image Correction/Enhancement)
Allows you to correct the target image (outlined in orange). Click this button to open the Correct/
Enhance Images window in which you can correct/enhance images and also adjust the
brightness, contrast, etc.
Important
Image correction/enhancement cannot be applied to PDF files or black and white binary
files.
Note
See "Correct/Enhance Images Window " for details.
Zoom in
Enlarges the target image (outlined in orange). You can also enlarge the image by double-
View Use Window
clicking it. You can check all pages when you select a PDF file.
You can also check file information such as file name, date, size and security setting. A lock icon
appears for PDF files with Document Open Password set.
Note
See "Opening/Editing Password-protected PDF Files " to open password-protected files.
(Search)
Enter a word or phrase included in the file name, Exif information or PDF text of the image you
want to search for, then click
User Comment is searched.
. For Exif information, text in Maker, Model, Description and
Note
Search images in My Box (Scanned/Imported Images), Recently Saved Images or a

selected folder and its subfolders.
(Refresh)
Refreshes the Thumbnail window contents.

(Display Size)

(Sort by)
Sorts the images in the Thumbnail window by category, date (ascending or descending) or
name (ascending or descending).
Images can be sorted by category only when My Box (Scanned/Imported Images) or Specify
Folder is displayed.
Thumbnail Window
Thumbnail Window
Images scanned from the Platen are displayed.

Important
A lock icon appears for PDF files with Document Open Password set.
Images may appear as "?" in the following cases.
- Opening unsupported images
- File size is too large and there is not enough memory to display the image
- The file is corrupted
Internet Explorer 5.5 Service Pack 2 or later is required to open password-protected PDF files.
When Images are Sorted by Categories

Images scanned from the Platen are displayed by category.
Note
Some images may not be detected correctly and thus may be classified into wrong categories.
In that case, drag and drop an image and move it from one category to another.
Category name Images: N (Selected: n)
Category name
The following categories are provided.
View Use Window
Photos: Portrait, Others

Documents: Business Card, Hagaki, Standard Size, PDF File, Others
Custom categories: Displays your custom categories.
Unclassified: Displays images that have not yet been classified.
Images: N
The number of images classified into the category is displayed.

(Selected: n)
The number of images with the checkbox selected is displayed.

Note
This portion is displayed only when one or more images are selected.
Open All
Displays all images.

Close All
Hides all images.

Edit Custom Categories
When My Box (Scanned/Imported Images) or Specify Folder is displayed, open the Edit Custom
Categories dialog box.
In the Edit Custom Categories dialog box, you can add/delete categories displayed in Custom
Categories.
See "Classifying Images into Categories " for details.
Classify Images
Images imported from hard disks or memory cards appear in Unclassified. Click Classify
Images to classify them automatically.
This button is displayed only when My Box (Scanned/Imported Images) or Specify Folder is
displayed.
Note
Classification may take time if there are many images to classify.

(Cancel All)

(Cancel Selection)
Related Topic
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Create/
Edit PDF file Window

Click PDF in the View & Use window, then click Create/Edit PDF file on the list to open the Create/Edit
PDF file window.
In the Create/Edit PDF file window, you can add/delete pages and rearrange the page order of PDF files
created with MP Navigator EX.
Important
If a password-protected PDF file is edited, the passwords will be deleted. Reset the passwords.
Rearrange Pages
You can move the selected image (outlined in orange).
Moves the selected image to the top.
Moves the selected image up one page.
Moves the selected image down one page.
Moves the selected image to the end.

Note
You can also drag and drop the image to rearrange the order.
Delete Selected Pages
Deletes the selected image.

Add Page
Allows you to select and add an existing PDF file.

Note
A password will be required to add a password-protected PDF file.

Undo
Cancels the latest change made.

Reset
Cancels all the changes made.

Save Selected Pages
Opens the Save as PDF file dialog box. Specify the save settings. Only the selected page is saved.
Note
When multiple pages are selected, a multiple-page PDF file is created.

See "Save as PDF file Dialog Box " for details on the Save as PDF file dialog box.
Save All Pages
Opens the Save as PDF file dialog box. Specify the save settings. All PDF files in the list will be saved
as one PDF file.
Finish
Closes the Create/Edit PDF file window.

Toolbar
(Rotate Left)
Rotates the file 90 degrees counter-clockwise.

(Rotate Right)
Rotates the file 90 degrees clockwise.

(Preview Mode)
Switches to Preview Mode.
The selected file appears in Preview.
(Enlarge)
Enlarges the image displayed in Preview.

(Reduce)
Reduces the image displayed in Preview.

(Full-screen)
Enlarges/reduces the image to display it fully in Preview.

(Thumbnail Mode)
Switches to Thumbnail Mode. Thumbnails of files are displayed.

Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Print
Document Dialog Box

Click Print in the View & Use window, then click Print Document on the list to open the Print Document
dialog box.
In the Print Document dialog box, you can make advanced settings for printing multiple scanned images
at one time.
Note
The setting items in the Print Document dialog box vary by printer.
Printer
Select the printer to use.
Paper Source
Select paper source.

Page Layout
Select a print type.

Normal-size Printing
Print one image per sheet.

Scaled Printing
Print images at the selected scale (enlarged or reduced).

Print an image at the paper size (enlarged or reduced).

Borderless Printing
Print the image on an entire sheet of paper without margins.

Page Layout Printing (2 on 1)
Layout and print two images on a sheet of paper.

Page Layout Printing (4 on 1)
Layout and print four images on a sheet of paper.

Enlarge/Reduce
Enlarge or reduce images to print.
Print a reduced or enlarged image by specifying a scale in increments of 1%.

100% Normal-size
Print the image in normal size.
Scale
Select a scale from the list.

Auto
Scale is adjusted automatically according to the detected paper width and the selected paper size.
Image may be printed rotated 90 degrees depending on its size.
Important
At 100% Normal-size, some images may be printed small or with some portions cropped. In that
case, select Auto to resize the print in proportion to the paper size.
Paper Size
Select the size of paper for printing. Match the size to the size of the paper set in the machine.
Note
Selectable paper sizes depend on the selected printer.

Media Type
Select the type of paper for printing. Print quality may be fixed depending on the paper type.
Note
Selectable paper types depend on the selected printer.

Print Quality
Select the print quality.

Density
to select the print density.

Click
Density cannot be changed for images scanned with Document Type set to Text(OCR).
Copies
Click
to select the number of copies to be printed.
Grayscale Printing
Select this checkbox to print the document in black and white.

Preview before printing
Select this checkbox to display the print result before printing.

Defaults

Print
Start printing with the specified settings.

Note
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Print
Photo Dialog Box

Click Print in the View & Use window, then click Print Photo on the list to open the Print Photo dialog box.
Important
The Print Photo dialog box will not open if Easy-PhotoPrint EX is installed.
PDF files cannot be printed.
Note
Double-click an image to display it in a different window.

Printer
Select the printer to use.
Properties...
Display the selected printer's advanced setting screen.

Paper Size
Select the size of paper for printing. Match the size to the size of the paper set in the machine.
Media Type
Select the type of paper for printing. Print quality may be fixed depending on the paper type.
Page Layout
Select a print type.

Normal-size Printing
Print one image per sheet.

Print an image at the paper size (enlarged or reduced).

Borderless Printing
Select this checkbox to print the image on an entire sheet of paper without margins.
Important
Page Layout setting will be disabled when you select Borderless Printing.
This setting is only available with printers that support borderless printing.
Orientation
Specify the print orientation.

Important
This setting is available only when Page Layout is Normal-size Printing. For others, the image is
automatically rotated according to the aspect ratio of the paper.
Copies
Specify the number of copies to print.

Vivid Photo
Select this checkbox to print the image in vivid colors.

Preview before printing
Select this checkbox to display the print result before printing.

Print
Start printing.
Note
Only the images in the Thumbnail window with the checkbox selected are printed.
Close
Closes the dialog box without printing the photo.

Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Send via
E-mail Dialog Box

Click Send in the View & Use window, then click Attach to E-mail on the list to open the Send via E-mail
dialog box.
In the Send via E-mail dialog box, you can make advanced settings for attaching images to e-mail.
Important
MP Navigator EX is compatible with the following e-mail software programs:

- Microsoft Outlook
- EUDORA
- Netscape Mail
(If an e-mail software program does not operate properly, check that the program's MAPI is enabled.
To enable MAPI, refer to the manual of the e-mail software program.)
Mail Program
The e-mail software program set up via Preferences in the Navigation Mode screen is displayed.
Select the e-mail software program you want to use.
Adjust attachment file size
When Save as type is JPEG, selecting this checkbox allows you to resize the images. Select a size
from Size.
Save in
Displays the folder in which to save the images. To change the folder, click Browse... to specify another
one. If resized, the resized images are saved.
File name
Enter the file name of the image to be attached (up to 32 characters). When saving multiple files, 4
Set...
You can specify a compression type for JPEG files.

Select High(Low Compression), Standard or Low(High Compression).
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Correct/
Enhance Images Window

(Image Correction/Enhancement) in the View & Use window or click Fix photo images in the
Click
Task Button area to open the Correct/Enhance Images window.
In the Correct/Enhance Images window, you can make advanced settings including image correction/
enhancement and brightness/contrast adjustment.
You can also display the source image and corrected image side by side for comparison.
Important
Image correction/enhancement cannot be applied to PDF files or black and white binary files.
Note

Enhancement) on the Toolbar or in the Zoom in dialog box.
It may take a while to correct large images.
(Image Correction/
(1) Task Area
(2) Toolbar
Task Area
Available tasks and settings vary between the Auto and Manual tabs.
Click Auto or Manual to open the corresponding tab.
Auto Tab
Use the functions in the Auto tab to apply corrections and enhancements to the entire image.
See "Correcting/Enhancing Images Automatically " for details.
Auto Photo Fix
Applies automatic corrections suitable for photos.

Face Sharpener
Sharpens out-of-focus faces. You can adjust the effect level using the slider.
Enhances skin beautifully by removing blemishes and wrinkles. You can adjust the effect level using
the slider.
Apply to all images
Applies the correction to all images.

OK
Applies the selected effect to the selected image or all images.


Save Selected Image

Saves all the corrected images displayed in the thumbnail list.

Exit
Close the Correct/Enhance Images window.
Manual Tab
Use Adjust to adjust brightness and contrast, or to sharpen the entire image.
Use Correct/Enhance to correct/enhance specific areas.
See "Correcting/Enhancing Images Manually " for details.
Adjustment
Brightness
Adjusts the overall image brightness.

Contrast
Adjusts the contrast of the image. Adjust the contrast when the image is flat due to lack of contrast.
Sharpness
Emphasizes the outline of the subjects to sharpen the image. Adjust the sharpness when the photo
is out of focus or text is blurred.
Blur

Removes show-through of text from the reverse side or removes the base color. Adjust the showthrough level to prevent text on the reverse side of thin document or the base color of the document
from appearing on the image.
Defaults
Resets all adjustments (brightness, contrast, sharpness, blur, and show-through removal).
Cancels all corrections, enhancements and adjustments applied to the selected image.
Save Selected Image


Exit

Correction/Enhancement
Face Brightener
Corrects the entire image so that the selected facial area is brightened. You can adjust the effect
level using the slider.
Undo
Cancels the latest correction.

Face Sharpener
Corrects the entire image to sharpen the face. You can specify the area you want to apply the effect
to. You can adjust the effect level using the slider.
Enhances skin beautifully by removing blemishes and wrinkles. You can specify the area you want
to apply the effect to. You can adjust the effect level using the slider.
Blemish Remover
Removes moles. You can specify the area you want to apply the effect to.
Cancels all corrections, enhancements and adjustments applied to the selected image.
Save Selected Image


Exit

OK
Applies the selected effect to the specified area.
Toolbar
Toolbar
(Rotate Left)
Rotates the image 90 degrees counter-clockwise.

(Rotate Right)
Rotates the image 90 degrees clockwise.

(Invert)
Inverts the image horizontally.

(Trimming)
Trimming is the act of selecting the area you want to keep in a photo and discarding the rest. In
the displayed window, drag the white frame to specify the trimming area. Move the mouse
pointer inside the white frame and drag to move the trimming area.
Note
Place the main subjects along the broken white lines or at the intersections to create a
balanced image.
(Enlarge)
Enlarges the displayed image.

(Reduce)
Reduces the displayed image.

(Full-screen)
Enlarges/reduces the image to display it full-screen.

(Compare)
Opens the source image for comparison.

The source image appears on the left and the corrected image appears on the right.
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > One-click
Mode Screen

(Switch Mode) at the bottom left of the Navigation Mode screen to display the One-click
Click
Mode screen.
Save
Scan and save documents. Document type is automatically detected. File format is automatically set.
Files are saved to a computer.
When you click this icon, the Save dialog box opens and you can specify the scan/save settings.
PDF
Scan documents and save them as PDF files.

When you click this icon, the PDF dialog box opens and you can specify the scan/save and application
settings.
PDF Dialog Box
Mail
Scan documents or photos and attach them to e-mail.

When you click this icon, the Mail dialog box opens and you can specify the scan/save and e-mail
software program settings.
Mail Dialog Box
OCR
Scan text documents then extract text in the image and display it in Notepad (included with Windows).
When you click this icon, the OCR dialog box opens and you can specify the scan/save and application
settings.
OCR Dialog Box
Important

Custom
Scan documents and open them in a specified application. Document type is automatically detected.
When you click this icon, the Custom dialog box opens and you can specify the scan/save and
application settings.
Custom Dialog Box
Important

(Switch Mode)
Switch to Navigation Mode. The Navigation Mode screen appears.

Preferences
(Guide)
Open this guide.
Important
The following restrictions apply when you scan with Document Type set to Auto Mode in the Save or
Custom dialog box.
Specify Document Type (other than Auto Mode) to extract the text in the image and convert to
editable text after scanning.
Related Topic
Page top
Dialog Box (One-click Mode Screen)

Click Save to PC on the Custom Scan with One-click tab or click Save in the One-click Mode screen to
open the Save dialog box.
Scan Settings
Document Type
Select the type of document to be scanned. When Auto Mode is selected, the document type is
automatically detected. In that case, Color Mode, Document Size and Resolution are automatically
set as well.
Important
The following types of documents cannot be scanned correctly with Auto Mode. In that case,
specify Document Type.
- Documents other than photos, Hagaki, business cards, magazines, newspapers, text
documents and CD/DVD
- A4 photos
- Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as
paperback pages with the spine cut off
- Documents printed on thin white paper
- Wide documents such as panoramic photos
Reflective CD/DVD labels may not be scanned properly.
Place documents correctly according to the type of document to be scanned. Otherwise,
documents may not be scanned correctly.
To reduce moire, set Document Type to Magazine.
Color Mode
Select how to scan the document.

Document Size

Important
Resolution

Resolution
Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan
settings.
Color Mode, Document Size, Resolution and other settings in the Save dialog box will be disabled.
Specify these settings in the ScanGear (scanner driver) screen.
Specify...
For Document Type, Color Mode, Document Size and Scanning Resolution, the settings specified in
the Save dialog box are displayed.
For Descreen, Unsharp Mask, etc., see the corresponding descriptions in " Scan Settings Dialog
Box."
Save Settings
Automatically save the image to your computer after scanning it
Select this to save the images to your computer as specified after scanning them.
The File name, Save as type and Save in settings will be displayed.
Important
If you select this function, you will not be able to set passwords for PDF files.
File name
Save as type

Select Auto, JPEG/Exif, TIFF or BMP. Auto is displayed when Document Type is Auto Mode. When
saving as PDF files, select PDF, PDF(Multiple Pages) or PDF(Add Page).
Important
When Auto is selected, files are saved in the following formats according to the document type.
Photos, Hagaki, business cards and CD/DVD: JPEG
Magazines, newspapers and text documents: PDF
You can change the file format from Set....
Images saved as PDF files may not open depending on the application. In that case, select an
option other than PDF in Save as type.
When Document Type is Auto Mode and Save as type is Auto, the file format may differ
depending on how you place the document.
Large documents (such as A4 photos) that cannot be placed away from the edges/arrow of the
Platen may not be saved in the correct file format when Save as type is Auto. In that case, select
a file format suitable for the document to be scanned.
If you select JPEG/Exif, the Save the JPEG/Exif file in AdobeRGB checkbox will be selectable.
Set...
When Save as type is Auto
You can specify the file format in which to save images. Select a file format for Document and Photo
each.
When Save as type is JPEG/Exif

You can specify a compression type for JPEG files. Select High(Low Compression), Standard or
Low(High Compression).
When Save as type is PDF, PDF(Multiple Pages) or PDF(Add Page)

Make advanced settings for creating PDF files. See " PDF Settings Dialog Box " for details.
Save in
created.
Save the JPEG/Exif file in AdobeRGB
Select this checkbox to save the images in colors that correspond to Adobe RGB.
Important
This function is available only when Save as type is JPEG/Exif.

This function is not available if the Adobe RGB profile is not installed.
Note
You cannot select this setting if the Use the scanner driver checkbox is selected.
When you save an image with the Save the JPEG/Exif file in AdobeRGB checkbox selected, an
underscore is added to the beginning of the file name. (Example: _Image0001.jpg)
Open the save dialog box after scanning the image (Input Exif information)
Select this to open the Save dialog box after scanning the images and specify the save settings
such as destination folder, file name and Exif information.
Save Dialog Box
Note
To set passwords for PDF files, select Open the save dialog box after scanning the image
(Input Exif information). After scanning, you can set the passwords in the Save dialog box.
Application Settings
Open with
You can select whether to open the View & Use window or Explorer after saving the images.
Start scanning by clicking the one-click button
Select this checkbox to start scanning when you click an icon.

Apply
Saves and applies the specified settings.

Click Cancel instead of Apply to cancel the specified settings.
Cancel
Cancels the specified settings. The current dialog box closes.

Defaults
Returns all settings in the dialog box to their defaults.
Scan
Scan and save documents with the specified settings.

When Save as type is Auto, a confirmation appears. Click Open Manual to open this guide (if it is
installed).
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scan
Settings Dialog Box

The Scan Settings dialog box opens when you click Specify... in the dialog box that opens when scanning
from the One-click Mode screen or the Custom Scan with One-click tab.
In the Scan Settings dialog box, you can make advanced scan settings.
Important
The displayed items vary by document type and how the screen was opened.
Note
The Scan Settings dialog box can also be opened by clicking Specify... on the Scanner Button
Settings tab of the Preferences dialog box.
Document Type
automatically detected.
In that case, Color Mode, Document Size, etc. are automatically set as well.
Important
When opened from the Scanner Button Settings tab, the Document Type specified in the Scanner
Button Settings tab is displayed and cannot be changed in this dialog box.
Color Mode

Color
This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).
Grayscale
This mode renders the image in 256 levels (8 bit) of black and white.
Black and White
This mode renders the image in black and white. The contrast in the image is divided at certain
levels (threshold level) into black and white and is rendered in two colors.
Note
Color Mode is not displayed in the Scan Settings dialog box opened from the Scanner Button
Settings tab.
Document Size

Important
Scanning Resolution

Resolution
Descreen
Select this checkbox to reduce moire patterns.
Descreen is the function for reducing this moire effect.
Note
Scanning takes longer than usual when you enable Descreen.

Unsharp Mask
Select this checkbox to emphasize the outline of the subjects and sharpen the image.
Prevent show-through of the document
Select this checkbox to sharpen text in a document or reduce show-through in newspapers.

Important
Select this checkbox when Document Type is text document and show-through is apparent in the
scanned image.
Remove gutter shadow
Select this checkbox to correct shadows that appear between pages when scanning open booklets.
Important
Align the document correctly with the marks on the Platen.

Gutter shadows can be corrected only when Document Size is set to a standard size.
You cannot select this checkbox when Document Size is Auto Detect, Auto Detect (Multiple
Documents) or Stitch Assist.
Note
Use ScanGear's Advanced Mode tab to correct gutter shadows when scanning non-standard size
documents or when custom cropping frames are set.
For details, see Gutter Shadow Correction in " Image Settings " (ScanGear's Advanced Mode tab).
Important
detected correctly.
Note
Scanning takes longer than usual when you enable Correct slanted document.
scanned image to the correct orientation. Select the language of the document to be scanned in
Document Language.
Important
detected correctly.
Note
Scanning takes longer than usual when you enable Detect the orientation of text documents and
rotate images.
Document Language

Important
Defaults

Page top
Save Dialog Box
Dialog Box
Save Dialog Box

The Save dialog box for specifying the image's file name and destination opens after you scan with Open
the save dialog box after scanning the image (Input Exif information) selected in the Save dialog box that
opens when you click Save to PC on the Custom Scan with One-click tab or Save in the One-click Mode
screen. You can specify the file type and destination while viewing the thumbnails.
Save as type

Select JPEG/Exif, TIFF, BMP, PDF, PDF(Multiple Pages) or PDF(Add Page).
PDF

PDF(Multiple Pages)

Important
PDF(Multiple Pages) is displayed when multiple images are scanned.

PDF(Add Page)
Important
specified as well.
passwords.
Important
PDF, PDF(Multiple Pages) and PDF(Add Page) cannot be selected for images scanned using the
Operation Panel of the machine.
Set...
Save Dialog Box

When Save as type is PDF, PDF(Multiple Pages) or PDF(Add Page)

Add to
This is displayed when you select PDF(Add Page) for Save as type and specify the PDF file to which
images are added. To change the file, click Browse... to specify another one.
Important
Images can only be added to PDF files created with MP Navigator EX. You cannot specify PDF
files created with other applications. PDF files edited in other applications cannot be specified as
well.
Exif Settings...
When Save as type is JPEG/Exif, you can input Exif information into the file to be saved.
Note
This function is available only when Save as type is PDF, PDF(Multiple Pages) or PDF(Add Page).
Rotate Left 90/Rotate Right 90
Rotates scanned images 90 degrees counter-clockwise or clockwise.

Select the image you want to rotate and click Rotate Left 90 or Rotate Right 90.
File name
Save in
created.
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Exif
Settings Dialog Box

You can input Exif information into a file to be saved. Exif is a standard format for embedding various
shooting data in digital camera images (JPEG). Embedding Exif information into scanned images
allows you to organize and print them along with digital camera images.
The Exif Settings dialog box can be opened when Save as type is JPEG/Exif.
Basic Information
Displays the information obtained automatically from the machine or software.

Advanced Information
Displays the information specified on the right side of the window.

Advanced Information Settings Area
You can input Exif information such as the title and shooting data. Select the checkbox of the items you
want to specify, and select or enter information.
Apply the Same Setting of Input Items Automatically
Select this checkbox to automatically display the information you specified for the previous image.
Apply
After specifying all the information you need, click Apply to embed it into the image. The information
appears in Advanced Information.
OK
Embeds the specified information into the image and closes the window. The specified information is
saved.
Cancel
Cancels the settings and closes the window.

Information is embedded when Cancel is clicked after clicking Apply.
Page top
PDF Dialog Box
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > PDF
Dialog Box
PDF Dialog Box

Click Save as PDF file on the Custom Scan with One-click tab or click PDF in the One-click Mode screen
to open the PDF dialog box.
Scan Settings
Document Type

Color Mode

Document Size

Resolution

Resolution
Specify...
the PDF dialog box are displayed.
Box."
PDF Dialog Box
Save Settings
Important
File name
Save as type

Select PDF, PDF(Multiple Pages) or PDF(Add Page).
PDF

PDF(Multiple Pages)

PDF(Add Page)
Important
Images cannot be added to password-protected PDF files.

Important
Click Set... to open the PDF Settings dialog box in which you can specify the PDF compression
type and other advanced settings for creating PDF files.
Note
See "Creating/Editing PDF Files " to delete or rearrange the pages of saved PDF files.
Save in
created.
Open the save dialog box after scanning the image
Select this to open the Save as PDF file dialog box after scanning the images and specify the save
settings such as destination folder and file name.
Note
To set passwords for PDF files, select Open the save dialog box after scanning the image. After
scanning, you can set the passwords in the Save as PDF file dialog box.
Open with
Specify an application with which to open scanned images. Drag and drop the icon of an application
that supports the file format displayed in Save as type. The specified application starts after images
PDF Dialog Box
are scanned.
Important
Depending on the specified application, the images may not appear correctly or the application
may not start.
Reset
Cancel the application setting.

Set...
Allows you to select an application to start.


Apply

Cancel

Defaults

Scan
Scan and save documents as PDF files with the specified settings.
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Save as
PDF file Dialog Box

The Save as PDF file dialog box opens when you scan from Save as PDF file on the Custom Scan with
One-click tab or from PDF in the One-click Mode screen after selecting Open the save dialog box after
scanning the image.
In the Save as PDF file dialog box, you can make settings for saving images to a computer.
Important
Save as type
Select a PDF file type to save the scanned images.

PDF

PDF(Multiple Pages)

Important
PDF(Multiple Pages) is displayed when multiple images are scanned.

PDF(Add Page)
Important
specified as well.
PDF(Add Page) cannot be selected for images scanned using the Operation Panel of the
machine.
passwords.
Important
You can set passwords for PDF files.

Set...
Make advanced settings for creating PDF files.

See "PDF Settings Dialog Box " for details.
Rotate Left 90/Rotate Right 90
Rotates scanned images 90 degrees counter-clockwise or clockwise.

Select the image you want to rotate and click Rotate Left 90 or Rotate Right 90.
File name
Save in
Displays the folder in which to save the PDF files. To change the folder, click Browse... to specify
another one.
created.
Page top
Mail Dialog Box
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Mail
Dialog Box
Mail Dialog Box

Click Attach to E-mail on the Custom Scan with One-click tab or click Mail in the One-click Mode screen to
open the Mail dialog box.
Scan Settings
Document Type

Color Mode

Document Size

Resolution

Resolution
settings.
Specify...
the Mail dialog box are displayed.
Box."
Mail Dialog Box
Save Settings
File Size
Select a size from Small (fits in a 640 by 480 window), Medium (fits in a 800 by 600 window), Large
(fits in a 1024 by 768 window) and Original.
File name
Save as type

Select JPEG/Exif, PDF or PDF(Multiple Pages).
Important
For JPEG/Exif images, click Set... to open a dialog box in which you can select a compression
type from High(Low Compression), Standard and Low(High Compression).
You cannot set passwords for PDF files.
Save in
created.
Attachment Settings
Mail Program
Specify an e-mail software program.

Note
Select Add... to open the Select Mail Program dialog box in which you can select an e-mail
software program. If the e-mail software program you want to use is not listed, click Add to List
and select it.

Apply

Cancel

Defaults

Scan
Mail Dialog Box
Scan documents with the specified settings.

When scanning is completed, the e-mail software program starts automatically and a new message
window opens with the image attached.
Page top
OCR Dialog Box
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > OCR
Dialog Box
OCR Dialog Box

Click OCR on the Custom Scan with One-click tab or in the One-click Mode screen to open the OCR
dialog box.
Scan Settings
Document Type

Color Mode

Document Size

Resolution

Resolution
settings.
Specify...
the OCR dialog box are displayed.
OCR Dialog Box
Box."
Note
When scanning slanted documents, select the Correct slanted document checkbox to improve
the text recognition accuracy.
Save Settings
File name
Save as type

Important
For JPEG/Exif images, click Set... to open a dialog box in which you can select a compression
type from High(Low Compression), Standard and Low(High Compression).
Save in
created.
OCR with
After the image is scanned, the text in the image is extracted and appears in Notepad (included with
Windows).
Note
Only text written in languages that can be selected on the General tab can be extracted to
Notepad (included with Windows). Click Set... on the General tab and specify the language
according to the language of the document to be scanned.
General Tab
Text displayed in Notepad (included with Windows) is for guidance only. Text in the image of
the following types of documents may not be detected correctly.
- Documents containing text with font size outside the range of 8 points to 40 points (at 300 dpi)
- Slanted documents
- Documents placed upside down or documents with text in the wrong orientation (rotated
characters)
- Documents with narrow line spacing
- Documents with colors in the background of text
- Documents containing multiple languages
Reset

Set...
Allows you to select an application.

Important
You cannot specify a text editor other than Notepad (included with Windows).
OCR Dialog Box

Apply

Cancel

Defaults

Scan
Scan documents with the specified settings.

Page top
Custom Dialog Box
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Custom
Dialog Box
Custom Dialog Box

Click Custom on the Custom Scan with One-click tab or in the One-click Mode screen to open the
Custom dialog box.
Scan Settings
Document Type
automatically detected. In that case, Color Mode, Document Size and Resolution are automatically
set as well.
Important
- A4 photos
To reduce moire, set Document Type to Magazine.
Color Mode

Document Size

Custom Dialog Box
Resolution

Resolution
settings.
Specify...
the Custom dialog box are displayed.
Box."
Save Settings
Note
If an application to start is specified in Application Settings, the scanned image opens in the
specified application.
File name
Save as type

Select Auto, JPEG/Exif, TIFF or BMP. Auto is displayed and selected by default when Document Type
is Auto Mode.
Important
When Auto is selected, files are saved in the following formats according to the document type.
Images saved as PDF files may not open depending on the application. In that case, select an
option other than PDF in Save as type.
Large documents (such as A4 photos) that cannot be placed away from the edges/arrow of the
Platen may not be saved in the correct file format when Save as type is Auto. In that case, select
a file format suitable for the document to be scanned.
If you select JPEG/Exif, the Save the JPEG/Exif file in AdobeRGB checkbox will be selectable.
Set...

You can specify the file format in which to save images. Select a file format for Document and Photo
each.

Custom Dialog Box
Save in
created.
Save the JPEG/Exif file in AdobeRGB
Select this checkbox to save the images in colors that correspond to Adobe RGB.
Important
This function is available only when Save as type is JPEG/Exif.

This function is not available if the Adobe RGB profile is not installed.
Note
You cannot select this setting if the Use the scanner driver checkbox is selected.
If you save an image with the Save the JPEG/Exif file in AdobeRGB checkbox selected, an
underscore is added to the beginning of the file name. (Example: _Image0001.jpg)
Open the save dialog box after scanning the image (Input Exif information)
Select this to open the Save dialog box after scanning the images and specify the destination folder,
file name and Exif information.
Note
See "Save Dialog Box " for details on the Save dialog box.
Open with
Specify an application with which to open scanned images. Drag and drop the icon of an application
that supports the file format displayed in Save as type. The specified application starts after images
are scanned.
Important
Depending on the specified application, the images may not appear correctly or the application
may not start.
Reset

Set...
Allows you to select an application to start.


Apply

Cancel

Defaults

Scan
Scan and save documents with the specified settings.

When Save as type is Auto, a confirmation appears. Click Open Manual to open this guide (if it is
Custom Dialog Box
installed).
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens >

Click Preferences in the Navigation Mode screen to open the Preferences dialog box.
In the Preferences dialog box, you can make advanced settings to MP Navigator EX functions via the
General and Scanner Button Settings tabs.
Note
See the corresponding sections below for details on each tab.

General Tab
Page top
General Tab
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > General
Tab
General Tab
On the General tab, you can specify general MP Navigator EX settings.
Product Name
Displays the product name of the machine that MP Navigator EX is currently configured to use.
If the displayed product is not the one you want to use, select the desired product from the list.
Compress scanned images when transferring
Compress and transfer images scanned using MP Navigator EX or the Operation Panel of the
machine. This is useful when the machine is connected via a slow interface such as USB 1.1. This
checkbox is not selected by default.
Important
When Photo is selected for Document Type on the Scanner Button Settings tab, allow 3/8 inches
(1 cm) or more space between the edges of the Platen and the document. If not, some images
may not be scanned at the correct positions and sizes.
Business cards, panorama photos and bordered photos may not be cropped accurately when
scanned. In that case, deselect the Compress scanned images when transferring checkbox and
scan again.
It is recommended that you scan at 300 dpi or higher resolution when scanning multiple photos
using this function.
The following restrictions apply when the Compress scanned images when transferring
checkbox is selected.
- The following black and white binary scanning functions are not available:
Text(OCR) cannot be selected for Document Type in the Scan/Import window.
Black and White cannot be selected in the color mode settings for One-click Mode.
- Remove gutter shadow is not available
- Save the JPEG/Exif file in AdobeRGB for One-click Mode is not available
- Available resolutions: 75 dpi, 150 dpi, 300 dpi, 600 dpi
- Maximum number of documents that can be scanned at one time: 4
The following images are not compressed even when scanned with the Compress scanned
images when transferring checkbox selected.
- Images scanned using the Operation Panel of the machine by automatically detecting the
document type
- Images scanned in One-click Mode by automatically detecting the document type
- Images scanned using ScanGear (scanner driver)
General Tab
Note
When the Compress scanned images when transferring checkbox is selected, Unsharp Mask is
always applied.
Save in (My Box)
Displays the folder in which to save scanned documents. To change the folder, click Browse... to
Location of Temporary Files
Displays the folder in which to save images temporarily. To change the folder, click Browse... to specify
another one.
Important
An error may occur if you set the destination to the root directory of the drive on which the
operating system is installed. Be sure to specify a folder.
Application to run
Displays the applications that can be started via MP Navigator EX. Install the applications from the
Setup CD-ROM that accompanies the machine.
For Attach to E-mail, you can select an e-mail software program to start.
For Convert to text file, Notepad (included with Windows) is displayed. In that case, click Set... and
specify the language according to the language of the document to be scanned. Only text written in
languages that can be selected in the Document Language can be extracted to Notepad.
Important
You can change which items are installed during installation from the Setup CD-ROM by
selecting Custom Install. If you choose not to install some applications with Custom Install, the
corresponding MP Navigator EX functions will be unavailable. To use those functions, install the
corresponding applications.
For Open PDF file, the application associated with the .pdf file extension by the operating system
is displayed.
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > MP Navigator EX Screens > Scanner
Button Settings Tab (Save)

On the Scanner Button Settings tab, you can specify the following settings.
This section describes the settings available when Select Event is Save to PC or Save as PDF file.
You can specify how to respond when scanning using the Operation Panel of the machine with the scan
mode set to Save to PC or Save as PDF file.
Event
Select Event
Displays the scan modes that can be selected on the Operation Panel of the machine.
Save to PC
Select this to specify the details for the scan mode Save to PC.
Save as PDF file
Select this to specify the details for the scan mode Save as PDF file.
Document Type
automatically detected. In that case, Document Size and Resolution are automatically set as well.
Important
Auto Mode can be selected only when Save to PC is selected for Select Event.
- A4 photos
Actions
Scan Settings
Document Size

Important
This setting is not available when Select Event is Save to PC with Document Type set to Auto
Mode.
Resolution

Resolution
Important
Mode.
Specify...
For Document Type, Document Size and Scanning Resolution, the settings specified in the Scanner
Button Settings tab are displayed.
Box."
Important
Mode.
Save Settings
The File Name, Save as type and Save in settings will be displayed.
Important
File Name
Enter the file name of the image to be saved (up to 32 characters).
Save as type

When saving to a computer, select Auto, JPEG/Exif, TIFF or BMP. Auto is displayed and selected
by default when Document Type is Auto Mode. When saving as PDF files, PDF(Multiple Pages)
is set.
Important
When Auto is selected, files are saved in the following formats according to the document
type.
Images saved as PDF files may not open depending on the application. In that case,
select an option other than PDF in Save as type.
Large documents (such as A4 photos) that cannot be placed away from the edges/arrow of
the Platen may not be saved in the correct file format when Save as type is Auto. In that
case, select a file format suitable for the document to be scanned.
Set...
You can specify the file format in which to save images. Select a file format for saving Document
and Photo each.
When Save as type is PDF(Multiple Pages)
Save in
Displays the folder in which to save the scanned images. To change the folder, click Browse...
to specify another one.
Select this checkbox to create a subfolder in the folder specified in Save in with the current date
and save imported files in it. A subfolder with a name such as "2008_01_01"
(Year_Month_Date) will be created.
Open the save dialog box after scanning the image
Select this to open the save dialog box after scanning the images and specify the save settings such
as destination folder, file name and Exif information.
Note
See "Save Dialog Box " (when Select Event is Save to PC) or " Save as PDF file Dialog Box
" (when Select Event is Save as PDF file) for details on each dialog box.
To set passwords for PDF files, select Open the save dialog box after scanning the image. After
scanning, you can set the passwords in the Save as PDF file dialog box.
Related Topic

Page top
Button Settings Tab (Attach to E-mail)

This section describes the settings available when Select Event is Attach to E-mail.
mode set to Attach to E-mail.
Event
Select Event
Displays the scan modes that can be selected on the Operation Panel of the machine. Select Attach
to E-mail.
Document Type

Important
Actions
Scan Settings
Document Size

Important
Resolution

Resolution
Specify...
Box."
Save Settings
File Size
Select a size from Small (fits in a 640 by 480 window), Medium (fits in a 800 by 600 window), Large
(fits in a 1024 by 768 window) and Original.
File Name

Save as type

Select JPEG/Exif or PDF.
Set...
When Save as type is PDF
Save in
created.
Attachment Settings
Mail Program
Specify an e-mail software program.
Related Topic

Page top
Button Settings Tab (Open with application)

This section describes the settings available when Select Event is Open with application.
mode set to Open with application.
Event
Select Event
Displays the scan modes that can be selected on the Operation Panel of the machine. Select Open
with application.
Document Type

Important
Actions
Scan Settings
Document Size

Important
Resolution

Resolution
Specify...
Box."
Save Settings
File Name

Save as type

Set...
Save in
created.
Open with
Specify an application with which to open scanned images. The specified application starts after
images are scanned.
Related Topic
Page top
Advanced Guide > Scanning > Scanning with the Bundled Application Software > Appendix: Opening Files Other than
Scanned Images

You can save or print data other than scanned images using MP Navigator EX.
Using images saved on a memory card

Using images saved on a computer

Page top
Scanned Images > Importing Images Saved on a Memory Card

You can import images (including PDF files scanned with the operation pannel) saved on a memory
card, and save them to a computer or print them using MP Navigator EX. You can also attach them to email, or edit them using an application that accompanies the machine.
When saving PDF files, you can select whether to enable keyword search, and also specify the
compression type and other advanced settings.
Important
Do not remove or insert memory cards while they are being accessed or the Access Lamp of the
machine is flashing.
The machine can only detect one memory card at a time. Do not simultaneously insert multiple
memory cards.
When switching to another memory card of the same type or inserting another memory card in a
different Card Slot, make sure that the Access Lamp of the machine is not flashing, then remove the
memory card. Then, insert another memory card.
The machine's Card Slot (memory card) may become inaccessible. In that case, restart the
machine or turn it off and reconnect the USB cable.
1. Insert a memory card containing image/PDF files into the machine's Card Slot.
For details on how to insert a memory card into the machine, refer to the on-screen manual: Basic
Guide.
2. Start MP Navigator EX as follows.

Windows Vista and Windows XP:
The program selection dialog box opens. Click MP Navigator EX Ver2.0.
Note
If you want to start MP Navigator EX every time a memory card is inserted into the machine,
follow these steps.
Windows Vista:
Select the Always do this for pictures checkbox and click MP Navigator EX Ver2.0.
Windows XP:
Select MP Navigator EX Ver2.0, then select the Always do the selected action. checkbox and
click OK.
The Memory Card screen of the Scan/Import window appears, and the images and PDF files
saved on the memory card appear in the Thumbnail window.
Note
See "Memory Card Screen (Scan/Import Window) " for details on the Memory Card screen
(Scan/Import window).
Windows 2000:
Start MP Navigator EX and open the Navigation Mode screen.
Point to Scan/Import and click Memory Card. The Memory Card screen of the Scan/Import window
appears, and the images and PDF files saved on the memory card appear in the Thumbnail
window.
3. Select the checkboxes of the images and PDF files you want to import, then click
Import.
The Import dialog box opens. Specify the folder in which to save the imported files.
Save in
Displays the folder in which to save the imported images and PDF files. To change the folder,
click Browse... to specify another one.
Select this checkbox to create a subfolder in the folder specified in Save in with the current date
and save imported files in it. A subfolder with a name such as "2008_01_01" (Year_Month_Date)
will be created.
Change the PDF file properties
This option is displayed when the memory card contains a PDF file.
Select this checkbox to change the PDF file settings. You can also change the settings of PDF
files created via scanning using the Operation Panel. Click Set... to open a dialog box in which
you can specify advanced settings. See " PDF Settings Dialog Box " for details.
4. Click Save.
The imported images and PDF files appear in the View & Use window.
See the corresponding sections below for details on using the imported images and PDF files.
Printing Documents
Printing Photos
Sending via E-mail
Editing Files
Page top
Scanned Images > Opening Images Saved on a Computer

You can open images saved on a computer and print them or attach them to e-mail using MP Navigator
EX. You can also edit them using an application that accompanies the machine.

2. In the Navigation Mode screen, point to View & Use and click My Box (Scanned/
Imported Images), Specify Folder or Recently Saved Images.
Click My Box (Scanned/Imported Images) to open images saved in My Box (Scanned/Imported
Images), click Specify Folder to open images saved in a specific folder, or click Recently Saved
Images to open recently saved images.
Note
If the Show this window at startup checkbox is not selected, the last used screen appears. If
(View & Use) on the upper left of the screen.
the Scan/Import window is displayed, click
The View & Use window opens.
See "View & Use Images on your Computer Tab" for details on the View & Use Images on your
Computer tab.
3. Click the folder containing the images you want to open.

Images saved in the folder appear in the Thumbnail window.
4. Select the images you want to use, then select what you want to do with them.
See the corresponding sections below for details on using images.
Printing Documents
Printing Photos
Sending via E-mail
Editing Files
Page top
Advanced Guide > Scanning > Scanning with Other Application Software

Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)

Page top
Advanced Guide > Scanning > Scanning with Other Application Software > What Is ScanGear (Scanner Driver)?

ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the
output size and make image corrections when scanning documents.
ScanGear can be started from MP Navigator EX or from other applications that are compatible with a
standard interface called TWAIN. (ScanGear (scanner driver) is a TWAIN-compatible driver.)
What You Can Do with this Software

This software enables you to preview scan results or set document type and output size, etc. when
scanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make
various corrections and adjust brightness, contrast, etc.
Screens
There are three modes: Basic Mode, Advanced Mode and Auto Scan Mode.
Switch modes by clicking a tab on the upper right of the screen.
Note
ScanGear (scanner driver) starts in the last used mode.

Settings are not retained when you switch between modes.
Basic Mode
Use Basic Mode to scan easily by following three simple on-screen steps (
and
).
Advanced Mode
Use Advanced Mode to select color mode, specify resolution, correct images, adjust colors, etc. when
scanning documents.
Auto Scan Mode

Use Auto Scan Mode to scan easily by simply placing the document on the Platen and clicking Scan.
Page top
Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using
ScanGear (Scanner Driver)
Scanning with Advanced Settings Using ScanGear (Scanner

Driver)
Starting ScanGear (scanner driver)

Scanning documents after making simple image corrections

Scanning documents after making advanced image corrections and brightness/color adjustments
Scanning with a simple operation

Scanning multiple documents at one time after making image corrections and color adjustments

Page top
ScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver)

Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning
documents. ScanGear (scanner driver) can be started from MP Navigator EX or an application.
Follow these steps to start ScanGear (scanner driver).
Starting from MP Navigator EX

Follow these steps to start ScanGear (scanner driver) from the Navigation Mode screen of MP Navigator
EX.


The Scan/Import window opens.
3. Select the Use the scanner driver checkbox, then click Open Scanner Driver.
The ScanGear (scanner driver) screen appears.

Follow these steps to start ScanGear (scanner driver) from the One-click Mode screen of MP Navigator
EX.
1. Start MP Navigator EX and open the One-click Mode screen.

2. Click the corresponding icon.

The corresponding dialog box opens.
3. Select the Use the scanner driver checkbox in Scan Settings, then click Scan.

Important
Use the scanner driver is not displayed in the PDF dialog box.
Starting from an Application

Follow these steps (example) to start ScanGear (scanner driver) from an application.
The procedure varies depending on the application. For details, refer to the application's manual.
1. Start the application.

2. On the File menu of the application, select Select Source and select the machine.
3. Select the command to scan a document (Scan/Import, Acquire image, etc.).
Page top
ScanGear (Scanner Driver) > Scanning in Basic Mode

In Basic Mode, you can scan easily by following the on-screen steps.
1. Place the document on the Platen, then start ScanGear (scanner driver).
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow of the Platen.
2. Set Select Source according to the document placed on the Platen.
Note
To scan magazines containing many color photos, scan in Advanced Mode with Color Mode
set to Color and Descreen set to ON.
3. Click Preview.
Preview image appears in the Preview area.
Note
If you scan without preview, colors are adjusted based on the document type selected in Select
Source.
4. Set Destination.
Note
To scan at 301 dpi or higher, scan in Advanced Mode tab.

5. Set Output Size.

Output size options vary by the items selected in Select Source and Destination.
6. Adjust the scan area (cropping frame) as required.

Adjust the size and position of the scan area (cropping frame) on the preview image. You can also
create two or more cropping frames.
If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area
is specified, only the portion in the specified area will be scanned.
7. Set Image corrections as required.

8. Click Scan.
Scanning starts.
Note
ScanGear's response after scanning can be specified in Status of ScanGear dialog after
scanning on the Scan tab of the Preferences dialog box.
Scan Tab
Note
See "Basic Mode Tab " for details on the Basic Mode tab.
Page top
ScanGear (Scanner Driver) > Scanning in Advanced Mode

In Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc.
when scanning documents.
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow of the Platen.
2. Click Advanced Mode.

The Advanced Mode tab appears.
Note
Settings are not retained when you switch between modes.
3. Set Paper Size and Color Mode.

Note
See "Input Settings " for details on Paper Size and Color Mode.
4. Click Preview.
Note
If you scan without preview, the show-through prevention function will be active. This function is
useful when scanning magazines. However, when scanning photos, the color tone of the
scanned image may differ from the source due to the show-through prevention function. In that
case, use preview first.
5. Set Output Settings.

Output Settings
6. Adjust the cropping frame, correct image and adjust colors as required.
Note
See the corresponding sections below for details on Image Settings and the Color Adjustment
Buttons.
Image Settings
See "Adjusting Cropping Frames " for details on cropping frames.
7. Click Scan.
Scanning starts.
Note
Scan Tab
Note
See "Advanced Mode Tab " for details on the Advanced Mode tab.
Page top
ScanGear (Scanner Driver) > Scanning in Auto Scan Mode

You can scan easily in Auto Scan Mode of ScanGear (scanner driver) by letting it automatically determine
the type of document placed on the Platen.
Note
Supported document types are photos, Hagaki, business cards, magazines, newspapers, text
documents and CD/DVD. To scan other documents, specify the document type on the Basic Mode
tab or the Advanced Mode tab.
See "Auto Scan Mode Tab " for details on the Auto Scan Mode tab.
Placing Documents
2. Click Auto Scan Mode.

The Auto Scan Mode tab appears.
3. Click Scan.
Scanning starts.
Note
Scan Tab
Page top
ScanGear (Scanner Driver) > Scanning Multiple Documents at One Time in Advanced Mode

You can scan two or more photos (small documents) on the Platen at one time by using Multi-Crop in
Advanced Mode of ScanGear (scanner driver).
Important
The following types of documents cannot be cropped correctly.

- Documents smaller than 1.18 inches (3 cm) square
- Photos that have been cut to various shapes
The following types of documents may not be cropped correctly. In that case, start ScanGear
(scanner driver), then adjust the cropping frame on the Advanced Mode tab and scan again.
- Photos that have a whitish border
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
Placing Documents
2. Click Advanced Mode.

The Advanced Mode tab appears.
3. Click Preview.
4. Click Multi-Crop above the Preview area.
Each image is cropped (scan area is specified) automatically according to the document size.
If you do not want to scan one, select the image and press the Delete key. Alternatively, select the
image and click
(Remove Cropping Frame) on the Toolbar.
Note
When you click Multi-Crop, Multi-Crop changes to Reset.

Click Reset to cancel Multi Crop.
Cancel Multi Crop to create custom cropping frames.
5. Set Color Mode, Output Resolution, etc. as required.

Note
See "Input Settings " for details on the Color Mode.

See "Output Settings" for details on the Output Resolution.
The settings are applied to all cropping frames.
6. Make image corrections as required.
Note
See "Image Settings " for details on each function.

The settings are applied to all cropping frames.
7. Click Scan.
Each cropping frame is scanned as an individual image.
Note
Scan Tab
Page top
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
Advanced Guide > Scanning > Scanning with Other Application Software > Correcting Images and Adjusting Colors with
Correcting Images and Adjusting Colors with ScanGear

(Scanner Driver)
The following sections provide you with tips and know-how on advanced scanning techniques involving
color/brightness adjustment, etc.
Sharpening out-of-focus photos, reducing dust and scratches, and correcting faded colors
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.)
Previewing and changing the color tone of the entire image to scan

Brightening colors that have faded with time or due to colorcast

Adjusting images that are too dark or bright, or too flat due to lack of contrast

Adjusting the color tone using histogram (a graph showing brightness distribution)
Adjusting Histogram
Adjusting the image brightness using tone curve (a graph of brightness balance)

Sharpening characters in text documents or reducing show-through effects
Setting Threshold
Page top
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Co... Page 521 of 758 pages
ScanGear (Scanner Driver) > Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.)
Correcting Images (Unsharp Mask, Reduce Dust and

Scratches, Fading Correction, etc.)
The Image Settings functions in Advanced Mode of ScanGear (scanner driver) allow you to enhance the
outline of the subjects, reduce dust/scratches and correct faded colors when scanning images.
Setting Items
Click
of a function and select an item from the pull-down menu.
Important
Do not apply these functions to images without moire, dust/scratches or faded colors. The color
tone may be adversely affected.
See the section below for details and precautions on each function.
Image Settings
Note
See the section below to start ScanGear (scanner driver) in Advanced Mode and scan.
Adjusting the image brightness and color tone

Set Auto Tone to ON.
OFF
ON
Sharpening slightly out-of-focus images

Set Unsharp Mask to ON.
OFF
ON
Reducing gradations and stripe patterns

Set Descreen to ON.
OFF
ON
Note
Moire is an uneven gradation or stripe pattern that appears in parts of a scanned image where the
dots have interfered with each other. Descreen is the function for reducing this moire effect.
Reducing dust and scratches

Set Reduce Dust and Scratches to Low, Medium or High according to the degree of dust and scratches.
Medium
None
Correcting photos that have faded with time or due to colorcast

Set Fading Correction to Low, Medium or High according to the degree of fading or colorcast.
None
Medium
Reducing graininess
Set Grain Correction to Low, Medium or High according to the degree of graininess.
None
Medium
Correcting backlit images

Set Backlight Correction to Low, Medium or High according to the degree of backlight.
None
Medium
Correcting shadows that appear between pages when scanning open booklets
Set Gutter Shadow Correction to Low, Medium or High according to the degree of shadows.
None
Medium
Page top
ScanGear (Scanner Driver) > Adjusting Colors Using a Color Pattern

You can preview color changes and reproduce natural colors by using the Color Pattern function in
ScanGear's Basic Mode.
Color Adjustment
Correct colors that have faded with time or due to colorcast. Colorcast is a phenomenon where a specific
color affects the entire picture due to the weather or ambient strong colors.
Click an arrow in Color Adjustment to emphasize the corresponding color.
Cyan & red, magenta & green and yellow & blue are complementary color pairs (each pair produces a
shade of gray when mixed). You can reproduce the natural colors of the scene by reducing the cast color
and increasing the complementary color.
It is recommended that you find a portion in the image where it should be white, and adjust the colors so
that the portion turns white.
Preview image appears in the center. Preview image colors change as you adjust them.
Below is an example of correcting a bluish image.

Since Blue and Green are too strong, click the Yellow and Magenta arrows to correct.
Before
After
Note
Color adjustments are applied only to the scan area (cropping frame) specified in the Preview area.
You can also select a color tone from the color pattern displayed on the left of the Color Pattern
screen.
You can also use this function to add a specific tint to an image. Increase the magenta to add a
warm tint, and increase the blue to add a cool tint.
Page top
ScanGear (Scanner Driver) > Adjusting Saturation and Color Balance

In ScanGear's Advanced Mode, click
(Saturation/Color Balance).
Saturation
Adjust the image's saturation (vividness). You can brighten colors that have faded with time, etc.
Move
(slider) under Saturation to the left to reduce the saturation (darken the image), and to the right
to increase the saturation (brighten the image). You can also enter a value (-127 to 127).
Saturation decreased
Original image
Saturation increased
Note
The natural color tone of the original image may be lost if you increase saturation too much.
Color Balance
Adjust images that have a colorcast. Colorcast is a phenomenon where a specific color affects the entire
picture due to the weather or ambient strong colors.
Move
(slider) under each color pair to the left or right to emphasize the corresponding color.
Cyan & Red

Magenta & Green
Yellow & Blue
These are complementary color pairs (each pair produces a shade of gray when mixed). You can
reproduce the natural colors of the scene by reducing the cast color and increasing the complementary
color.
It is usually difficult to correct the image completely by adjusting only one color pair. It is recommended
that you find a portion in the image where it should be white, and adjust all three color pairs so that the
portion turns white.
You can also enter a value (-127 to 127).
Below is an example of an image in which the Cyan & Red pair has been adjusted.
Cyan is increased
Red is increased
Note
Click Defaults to reset all adjustments in the current window.

Page top
ScanGear (Scanner Driver) > Adjusting Brightness and Contrast

(Brightness/Contrast).
Note
Click
to switch to detailed view. Click
to return to the previous view.
Channel
Each dot of an image is a mixture of Red, Green and Blue in various proportions (gradation). These
colors can be adjusted individually as a "channel."
Master
Adjust the Red, Green and Blue combined.
Red
Adjust the Red channel.

Green
Adjust the Green channel.

Blue
Adjust the Blue channel.

Note
Only Grayscale will be displayed in Channel when Color Mode is Grayscale.
Brightness
Adjust the image brightness. Move
(slider) under Brightness to the left to darken and right to brighten
the image. You can also enter a value (-127 to 127).
Darkened
Original image
Brightened
Note
Highlights may be lost if you brighten the image too much, and shadows may be lost if you darken
the image too much.
Contrast
Contrast is the degree of difference between the brighter and darker parts of an image. Increasing
contrast will increase the difference, thus sharpening the image. Decreasing contrast will decrease the
difference, thus softening the image.
Move
(slider) under Contrast to the left to decrease and right to increase the contrast of the image.
You can also enter a value (-127 to 127).
Decreased contrast
Original image
Increased contrast
Note
Increasing the contrast is effective in adding a three-dimensional feel to soft images. However,
shadows and highlights may be lost if you increase the contrast too much.
Note

Page top
Adjusting Histogram
ScanGear (Scanner Driver) > Adjusting Histogram
Adjusting Histogram
(Histogram).
Channel
Master
Red

Green

Blue

Note
Reading Histograms
You can open Histogram of a specified area for each Channel. The higher the Histogram peak, the more
data is distributed to that level.
(1) Bright area
(2) Dark area
(3) Whole image
Adjusting Histogram
More data is distributed to the

highlight side.
More data is distributed to the
shadow side.
Data is widely distributed between the

highlight and shadow.
Adjusting Histograms (Using the Slider)

Select a Channel, then move
set as the shadow or highlight.
- All parts to the left of

- The parts at
(Black-point Slider) or
(White-point Slider) to specify the level to be
(Black-point Slider) will be black (level 0).
(Mid-point Slider) will turn to the color exactly between the black-point and white-point.
- All parts to the right of
(White-point Slider) will turn white (level 255).
Auto Tone is set to ON by default. Adjustments shown below are automatically performed.
Moving the Black-point and White-point Sliders

Move the Black-point Slider or White-point Slider to adjust brightness.
Images with more data distributed to the highlight side
Move the Black-point Slider toward the highlight side.
Images with more data distributed to the shadow side
Move the White-point Slider toward the shadow side.
Images with widely distributed data
Move the Black-point Slider toward the highlight side, and White-point Slider toward the shadow side.
Moving the Mid-point Slider

Move the Mid-point Slider to specify the level to be set as the middle of the tonal range.
Images with more data distributed to the highlight side
Adjusting Histogram
Move the Mid-point Slider toward the highlight side.
Images with more data distributed to the shadow side
Move the Mid-point Slider toward the shadow side.
Adjusting Histograms (Using the Droppers)

When you select a Channel and click the Black-point, Mid-point or White-point Dropper, the mouse
pointer on the preview image changes to a dropper. Click a Dropper displayed below the histogram to
change the setting.
- The point clicked with

to 245).
(Black-point Dropper) will be the darkest point. You can also enter a value (0

a value (5 to 250).
(Mid-point Dropper) will be the middle of the tonal range. You can also enter

(10 to 255).
(White-point Dropper) will be the brightest point. You can also enter a value
- Click
for Gray Balance and click the area you want to adjust the color in the preview image.
The clicked point will be set as the achromatic color reference, and the rest of the image is adjusted
accordingly. For instance, if snow in a photo appears bluish, click the bluish part to adjust the whole
image and reproduce natural colors.
Note

Page top
ScanGear (Scanner Driver) > Adjusting Tone Curve

(Tone Curve Settings).
Channel
Master
Red

Green

Blue

Note
Reading Tone Curves

With ScanGear (scanner driver), scanning images via a scanner is the input, and displaying to a monitor
is the output. Tone Curve shows the balance of tone input and output for each Channel.

In Select Tone Curve, select a tone curve from No correction, Overexposure, Underexposure, High
contrast, Reverse the negative/positive image and Edit custom curve.
No correction (No adjustment)
Overexposure (Convex curve)

The midtone data of the input side is stretched toward the highlight of the output side, resulting in a
bright-toned image when viewed on a monitor.
Underexposure (Convex curve)

The midtone data of the input side is stretched toward the shadow of the output side, resulting in a darktoned image when viewed on a monitor.
High contrast (S curve)

The highlight and shadow of the input side are enhanced, resulting in a high-contrast image.
Reverse the negative/positive image (Downward-sloping line)

The input and output sides are reversed, resulting in a negative-positive inverted image.
Edit custom curve

You can drag specific points on the Tone Curve to freely adjust the brightness of the corresponding
areas.
Note

Page top
Setting Threshold
ScanGear (Scanner Driver) > Setting Threshold
Setting Threshold
The brightness of color and grayscale images is expressed in a value between 0 and 255. However, in
creating black and white images, all colors are mapped to either black (0) or white (255). Threshold is
the borderline value that determines a color as black or white. By adjusting the threshold level, you can
sharpen text in a document or reduce show-through in newspapers.
This function is available when Color Mode is Black and White.

(Threshold).
Adjusting Threshold
Move
(slider) to the right to increase the threshold value and thus increase the black areas. Move the
slider to the left to decrease the value and thus increase the white areas. You can also enter a value (0 to
255).
Note

Page top
Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens

The following sections describe ScanGear's screens and functions, and how to use ScanGear (scanner
driver).
Basic Mode Tab
Advanced Mode Tab
Input Settings
Output Settings
Image Settings
Auto Scan Mode Tab

Scanner Tab
Preview Tab
Scan Tab
Color Settings Tab
Page top
Basic Mode Tab
Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens >
Basic Mode Tab
Basic Mode Tab

This mode allows you to scan easily by following the on-screen steps.
This section describes the settings and functions available in Basic Mode.

(2) Toolbar
(3) Preview Area

Select Source
Photo(Color)
Scan color photos.

Magazine(Color)
Scan color magazines.

Newspaper(Grayscale)
Scan text and line drawings in black and white.

Document(Grayscale)
Scan photos and documents in black and white.

Select this mode to create high-resolution black and white images.
Note
If you select an option other than Newspaper(Grayscale), the Unsharp Mask function will be
active.
If you select Photo(Color), Magazine(Color) or Document(Grayscale), the Auto Tone function will
be active. However, if you disable Always Execute the Auto Tone on the Color Settings tab of the
Preferences dialog box, the Auto Tone function will be disabled.
If you select Magazine(Color), the Descreen function will be active.
Display Preview Image
Click Preview to perform a trial scan. The scanned document appears in the Preview area. A
cropping frame (scan area) is displayed according to the document size.
Basic Mode Tab
Note
If you scan without preview, colors are adjusted based on the document type selected in Select
Source.
When using the machine for the first time, scanner calibration starts automatically. Wait a while
until the preview image appears.
Destination
Select what you want to do with the scanned image.

Print (300 dpi)
Select this to print the scanned image on a printer.

Image display (150 dpi)
Select this to view the scanned image on a monitor.

OCR (300 dpi)
Select this to use the scanned image with OCR software.

OCR software is software that converts text scanned as an image into text data that can be
edited in word processors and other programs.
Note
To scan at 301 dpi or higher, scan in Advanced Mode after setting the Output Resolution.
See "Scanning in Advanced Mode " to scan in Advanced Mode.
Output Size
Select an output size.

Output size options vary by the item selected in Destination.
Flexible
When a cropping frame is displayed, the portion within the cropping frame will be scanned at
100%. When no cropping frame is displayed, the entire Preview area will be scanned.
Paper Size (L, A4, etc.)
Select an output paper size. The portion within the cropping frame will be scanned at the size of
the selected paper size. You can drag the cropping frame to enlarge/reduce it while maintaining
the aspect ratio.
Monitor Size (1024 x 768 pixels, etc.)
Select an output size in pixels.

A cropping frame of the selected monitor size will be displayed and the portion within the
cropping frame will be scanned. You can drag the cropping frame to enlarge/reduce it while
maintaining the aspect ratio.
Add/Delete...
Open the Add/Delete the Output Size dialog box, in which you can save custom output sizes. You
can select this option when Destination is Print (300 dpi) or Image display (150 dpi).
Basic Mode Tab
In the Add/Delete the Output Size dialog box, you can specify multiple output sizes and save
them at one time. Saved items appear in the Output Size list along with the predefined items.
Add
To add a size, enter Output Size Name, Width and Height, then click Add. For Unit, you can
select mm or inches when Destination is Print (300 dpi) but you can only select pixels when
Destination is Image display (150 dpi). The name of the added size appears in Output Size List.
Click Save to save the items listed in Output Size List.
Delete
To delete an item, select it in Output Size List and click Delete. Click Save to save the items
listed in Output Size List.
Important
You cannot delete predefined output sizes such as A4 and 1024 x 768 pixels.
Note
Save up to 10 output sizes to Output Size List.

An error message appears when you enter a value outside the setting range. Enter a value
within the setting range.
Note
Whether or how the cropping frame is initially displayed on a preview image can be specified
on the Preview tab of the Preferences dialog box. See Cropping Frame on Previewed Images in
"Preview Tab ."
Invert aspect ratio
This button is available when Output Size is set to anything but Flexible.
Click this button to rotate the cropping frame. Click again to return it to the original orientation.
Adjust cropping frames
You can adjust the scan area within the Preview area.
If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area
is specified, only the portion in the cropping frame will be scanned.
Note

Image corrections
Fading correction
Corrects and scans photos that have faded with time or have a colorcast.
Basic Mode Tab
Backlight correction
Corrects photos that have been shot against light.

Gutter shadow correction
Corrects shadows that appear between pages when scanning open booklets.
Important
For precautions on using this function, see Gutter Shadow Correction in " Image Settings
" (Advanced Mode tab).
Color Pattern...
Allows you to adjust the image's overall color. You can correct colors that have faded due to
colorcast, etc. and reproduce natural colors while previewing color changes.
Note
See "Adjusting Colors Using a Color Pattern " for details.
Perform Scan
Click Scan to start scanning.

Note
When scanning starts, the progress will be displayed. Click Cancel to cancel the scan.
Preferences...
The Preferences dialog box opens and you can make scan/preview settings.
See "Preferences Dialog Box " for details.
Close
Close ScanGear (scanner driver).
Toolbar
Toolbar
You can rotate preview images using the Toolbar.
(Auto Crop)
Displays and adjusts the cropping frame automatically to the size of the document displayed in
the Preview area. The scan area is reduced every time you click this button if there are cropping
area within the cropping frame.
(Remove Cropping Frame)
Removes the selected cropping frame.

(Rotate Left)
Rotates the preview image 90 degrees counter-clockwise.

- The result will be reflected in the scanned image.
- The image returns to its original state when you preview again.
(Rotate Right)
Rotates the preview image 90 degrees clockwise.

(Information)
Displays the version of ScanGear (scanner driver) and the current settings.
(Open Guide)
This page appears.
Preview Area
Basic Mode Tab
Preview Area
This is where a trial image is displayed after you click Preview.

You can specify the scan area (cropping frame) on the displayed image.
You can also create two or more cropping frames.
Note
Related Topic
Page top
Advanced Mode Tab
Advanced Mode Tab
Advanced Mode Tab

This mode allows you to make advanced scan settings such as the color mode, resolution, image
brightness and color tone.
This section describes the settings and functions available in Advanced Mode.

(2) Toolbar
(3) Preview Area

Favorite Settings
You can name and save a group of settings (Input Settings, Output Settings, Image Settings and
Color Adjustment Buttons), and load it as required. It is convenient to save a group of settings if you
will be using it repeatedly. You can also use this to reload the default settings.
Select Add/Delete... from the pull-down menu and the Add/Delete Favorite Settings dialog box
opens.
Enter Setting Name and click Add. The name appears in Favorite Settings List.
When you click Save, the item appears in the Favorite Settings list along with the predefined items.
Advanced Mode Tab
Important
You can set Add/Delete... in Favorite Settings after preview.

Note
Save up to 10 items to Favorite Settings List. To delete an item, select it in Favorite Settings List
and click Delete. Click Save to save settings displayed in Favorite Settings List.
Input Settings
Specify the input settings such as the document type and size.
Input Settings
Output Settings
Specify the output settings such as the output resolution and size.
Output Settings
Image Settings
Enable/disable various image correction functions.

Image Settings
These buttons can be used to make fine corrections to the image brightness and color tones. You
can adjust the image's overall brightness or contrast, and adjust its highlight and shadow values
(histogram) or balance (tone curve).
Zoom
Rescans the portion within the cropping frame at higher magnification. When the image is zoomed
in, Zoom changes to Undo. Click Undo to return the display to its non-magnified state.
Note
Zoom rescans the image and displays high-resolution image in Preview.

(Enlarge/Reduce) on the Toolbar zooms in on the preview image quickly. However, the
resolution of the displayed image will be low.
Preview
Perform a trial scan.
Scan
Start scanning.
Advanced Mode Tab
Note
When scanning is completed, a dialog box prompting you to select the next action may open.
Follow the prompt to complete. For details, see Status of ScanGear dialog after scanning in "
Scan Tab" (Preferences dialog box).
If the total size of the images to be scanned exceeds 100 MB, a message appears warning you
that scanning may take time. Click OK to continue, or Cancel to cancel the scan.
Preferences...
See "Preferences Dialog Box " for details.
Close
Toolbar
Toolbar
With the Advanced Mode Toolbar, you can make adjustments to the preview image and also select a
part of the displayed image.
(Clear)
Click this button to delete the preview image.

It also resets the Toolbar and color adjustment settings.
(Crop)
Allows you to specify the scan area by dragging the mouse.

(Move Image)
If an enlarged image is too large to fit in the Preview area, you can click this button and drag the
image across the screen until the part you want to see is displayed. You can also move the
image using the scroll bars.
(Enlarge/Reduce)
Click this button then click on the image to enlarge it (zoom in). Right-click on the image to
reduce it (zoom out).
(Rotate Left)
Rotates the preview image 90 degrees counter-clockwise.

(Rotate Right)
Rotates the preview image 90 degrees clockwise.

(Information)
Displays the version of ScanGear (scanner driver) and the current settings.
(Open Guide)
This page appears.

(Auto Crop)
Displays and adjusts the cropping frame automatically to the size of the document displayed in
the Preview area. The scan area is reduced every time you click this button if there are cropping
area within the cropping frame.
(Remove Cropping Frame)
Removes the selected cropping frame.
Advanced Mode Tab
Select All Crops
This button is available when there are two or more cropping frames.
All cropping frames will be displayed in thick broken lines. The settings will be applied to all the
cropping frames.
Multi-Crop
Automatically detects and crops multiple documents placed on the Platen.

You can remove the cropping frames of the images you do not want to scan.
Note
See "Scanning Multiple Documents at One Time in Advanced Mode " to scan multiple
documents at one time.
Preview Area
Preview Area
This is where a trial image is displayed after you click Preview.

You can specify the scan area (cropping frame) on the displayed image.
You can also create two or more cropping frames.
Note
Related Topic
Page top
Input Settings
Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Input
Settings
Input Settings
Input Settings allows you to set the following items:

Select Source
The type of document to be scanned is displayed.
Paper Size

When you select a size, the Preview area size changes accordingly.
Important
Some applications have a limit to the amount of scan data they can receive. ScanGear (scanner
driver) can scan data that is of:
- 21000 pixels x 30000 pixels or less
If you change Paper Size after previewing, the preview image will be deleted.
Note
If you are not sure which size you should select for Paper Size, set Paper Size to Full Platen, then
measure the size of the document and enter the values into
(Width) and
(Height).
Color Mode

Color
Select this mode to scan color documents or to create color images. This mode renders the
image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).
Grayscale
Select this mode to scan black and white photos, or to create black and white images. This mode
renders the image in 256 levels (8 bit) of black and white.
Black and White
Select this mode to scan photos and other documents in black and white. This mode renders the
image in black and white. The contrast in the image is divided at certain levels (threshold level)
Input Settings
into black and white and is rendered in two colors. The threshold level can be set with
(Threshold).
Input Size
The Paper Size is displayed before preview. After preview, the cropping frame size is displayed.
You can adjust the cropping frame (scan area) size by entering the values into
(Height).
(Keep Aspect Ratio) and change it to
Click
specify the cropping frame size.
(Width) and
(Locked) to maintain the aspect ratio when you
Important
Input size settings are available only when Output Size in Output Settings is Flexible. If you select
a size other than Flexible, a cropping frame calculated from Output Size and Output Resolution is
displayed, and its aspect ratio is fixed.
Note
The values you can enter will be within the range of the selected document size. The minimum
size is 96 pixels x 96 pixels when Output Resolution is 600 dpi and Enlarge/Reduce is 100%.
When Auto Crop is performed, the aspect ratio will not be maintained since the size will be
prioritized.
Page top
Output Settings
Output Settings
Output Settings
Output Settings allows you to set the following items:

Output Resolution
Select the resolution to scan at.

The higher the resolution (value), the more detail in your image.
Select a resolution from the options displayed by clicking the button, or enter a value within the range
of 25 dpi to 19200 dpi (in 1 dpi increments).
Note
See "Resolution" for details.

Output Size
Select an output size.

Select Flexible to set custom sizes or select a size for printing or displaying. Select Add/Delete... to set
custom size and save it as a new output size option.
Flexible
You can specify the output resolution and scale, and adjust the cropping frame. When no cropping
frame is displayed, the entire Preview area will be scanned. When a cropping frame is displayed,
the portion within the cropping frame will be scanned.
(Width) and
To enlarge/reduce the scanned image, enter values into
(Height) in Output
Settings or specify a value (by 1%) for %. The maximum value available for % depends on the
Output Resolution. % can be specified for up to 19200 dpi (the maximum available output
resolution).
Paper Size (L, etc.) & Monitor Size (1024 x 768 pixels, etc.)
Width, height and scale cannot be specified. The preview image will be cropped according to the
selected output size and resolution. The portion within the cropping frame will be scanned at the
size of the selected paper/monitor size. You can drag the cropping frame to enlarge, reduce or
move it while maintaining the aspect ratio.
Add/Delete...
Open the Add/Delete the Output Size dialog box, in which you can save/delete custom output
sizes.
Output Settings
In the Add/Delete the Output Size dialog box, you can specify multiple output sizes and save them
at one time. Saved items appear in the Output Size list along with the predefined items.
Add
To add a size, select Print or Image display for Destination, then enter Output Size Name, Width,
and Height then click Add. The name of the added size appears in Output Size List.
Click Save to save all the added items. Click Cancel to cancel all items that were added after you
opened the Add/Delete the Output Size dialog box.
Delete
To delete an item, select it in Output Size List and click Delete. The deleted items will disappear
from Output Size List.
When you click Save, the items that disappeared from Output Size List will be deleted. When you
click Cancel, they will not be deleted.
Important
You cannot delete predefined output sizes such as A4 and 1024 x 768 pixels.
Note
Save up to 10 output sizes to Output Size List for each destination.

An error message appears when you enter a value outside the setting range. Enter a value
within the range displayed in the message.
Unit varies by Destination. For Print, select mm or inches. For Image display, the unit is
pixels.
Note

Whether or how the cropping frame is initially displayed on a preview image can be specified on
the Preview tab of the Preferences dialog box. See Cropping Frame on Previewed Images in "
Preview Tab ."
(Switch Aspect Ratio)
Rotate the cropping frame 90 degrees. Click again to return it to the original orientation.
Data Size
An image file is created when the preview image is scanned. Its size when saved in BMP format is
displayed.
Note
When the file size is 100 MB or more, the value appears in red. In that case, a warning message
appears when you click Scan. It is recommended that you change each settings to set Data Size
99 MB or less, and than scan.
Page top
Image Settings
Image Settings
Image Settings
Important
Do not apply these functions to images without moire, dust/scratches or faded colors. The color
tone may be adversely affected.
Selectable settings depend on color mode settings.
Scanning may take longer when you use Image Settings.
Image correction results may not be reflected in the preview image.
Image Settings allows you to set the following items:

Auto Tone
When this is set to ON, the brightness of the specified portion of the image is automatically optimized.
The result of the color adjustment will be reflected in the entire image. This setting is ON by default.
Important
You can set Auto Tone after preview.

You can set this setting when Recommended is selected on the Color Settings tab of the
When you click Multi-Crop, this setting turns to ON and you cannot change it.
Note
When previewing or scanning images with consistent color tone (such as the sky), the color tone
may change from the source image due to the Auto Tone function. In that case, set Auto Tone to
OFF.
Unsharp Mask
When this is set to ON, the outline of the subjects is emphasized to sharpen the image. This setting is
ON by default.
Descreen
Descreen is the function for reducing this moire effect. This setting is OFF by default.
Note
Image Settings
Even if Descreen is set to ON, some moire effects may remain if Unsharp Mask is set to ON. In
that case, set Unsharp Mask to OFF.
Selecting Magazine(Color) in Select Source in Basic Mode has the same effect as setting
Descreen to ON in Advanced Mode.
Reduce Dust and Scratches
Scanned photos may contain white dots caused by dust or scratches. Use this function to reduce such
noise. This setting is None by default.
None
Dust and scratches will not be reduced.

Low
Select this to reduce small dust particles and scratches. Large ones may remain.
Medium

High
Select this to reduce small/large dust particles and scratches. Evidence of the reduction process
may remain and may also remove delicate parts of the image.
Important
This function may not be effective for some types of photos.

Note
It is recommended that you select None when scanning printed materials.

Fading Correction
Use this function to correct photos that have faded with time or have a colorcast. Colorcast is a
phenomenon where a specific color affects the entire picture due to the weather or ambient strong
colors. This setting is None by default.
None
Fading correction will not be applied.

Low
Select this to correct a small amount of fading and colorcast.

Medium

High
Select this to correct a large amount of fading and colorcast. This can affect the tone of the image.
Important
You can set Fading Correction after preview.

Fading Correction may not be effective if the scan area is too small.
When you click Multi-Crop, this setting turns to None and you cannot change it.
Grain Correction
Use this function to reduce graininess (roughness) in photos taken with high-speed or sensitized film.
This setting is None by default.
None
Graininess will not be reduced.

Low
Select this when the photo is slightly grainy.

Medium

High
Select this when the photo is very grainy. This can affect the gradation and sharpness of the
Image Settings
image.
Important
Grain Correction may not be effective if the scan area is too small.
Backlight Correction
Use this function to correct photos that have been shot against light.
When you change the Backlight Correction setting, the result will be reflected in the preview image.
None
Backlight correction will not be applied.

Low
Select this to correct slightly backlit photos. This will not affect the image contrast.
Medium

High
Select this to correct strongly backlit photos. This can affect the image contrast.
Important
You can set Backlight Correction after preview.

Backlight Correction may not be effective if the scan area is too small.
When you click Multi-Crop, you cannot change this setting.
Note
Noise patterns may appear when Backlight Correction is applied. Applying Grain Correction and
setting Unsharp Mask to OFF may reduce the noise patterns.
Gutter Shadow Correction
Use this function to correct shadows that appear between pages when scanning open booklets.
When you set the Gutter Shadow Correction setting in the preveiw image, the result will be reflected.
Preview the effects before scanning, as results vary depending on the type of document and how it is
pressed.
Unclear or blurred text/lines caused by curved pages are not corrected.
None
Gutter shadow will not be corrected.

Low
Select this when the effect level is too strong with the medium setting.
Medium

High
Select this when the effect level is too weak with the medium setting.
Important
Do not place items that weigh 4.4 lbs (2.0 kg) or more on the Platen. Also, do not press on the
document with a force exceeding 4.4 lbs (2.0 kg). If you press heavily, the scanner may not work
correctly or you might break the glass.
When you click Multi-Crop, this setting is not available. Click Reset then change the setting.
Align the document with the edge of the Platen. If not, the shadow will not be corrected properly.
Image Settings
Shadows may not be corrected properly depending on the document. If the page background is
not white, shadows may not be detected correctly or may not be detected at all.
While scanning, press down on the spine with the same amount of pressure you used to preview
the scan. If the binding part is not even, the shadow will not be corrected properly.
How to place the document depends on your model and the document to be scanned.
Note
Cover the document with black cloth if white spots, streaks, or colored patterns appear in scan
results due to ambient light entering between the document and the Platen.
If the shadow is not corrected properly, adjust the cropping frame on the preview image.
Page top
Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Color
Adjustment Buttons
The Color Adjustment Buttons allow you to make fine corrections to the image brightness and color
tones. You can adjust the image's overall brightness or contrast, and adjust its highlight and shadow
values (histogram) or balance (tone curve).
Important
The Color Adjustment Buttons are not available when you apply Multi-Crop or when you select Color
Matching on the Color Settings tab of the Preferences dialog box.
Selectable settings depend on color mode settings.
Note
When you adjust the image via the Color Adjustment Buttons, the results will be reflected in the
preview image.
Click a Color Adjustment Button to set the following items:

(Saturation/Color Balance)
Adjust the vividness and color tone of the image. Use this function to brighten colors that have faded
with time or due to colorcast. Colorcast is a phenomenon where a specific color affects the entire
picture due to the weather or ambient strong colors.
(Brightness/Contrast)
Adjust the brightness and contrast of the image. If the image is too dark or too bright, or if the image
quality is flat due to lack of contrast, you can adjust the levels of brightness and contrast.
(Histogram)
A histogram allows you to see the data concentration at each brightness level of an image. You can
specify the darkest level (shadow) and brightest level (highlight) within an image, cut the levels and
expand the middle of the tonal range of the image.
Adjusting Histogram
(Tone Curve Settings)
Adjust the brightness of an image by selecting the type of graph (tone curve) showing the balance of
tone input and output. You can make fine adjustments to the brightness of a specific area.
(Final Review)
Make a final check of color adjustments. The final synthesized tone curve and the histogram derived
from the subsequent image processing will be displayed. There are no settings to make in this
screen.
For a color image, select a color in Channel to check either Red, Green or Blue, or select Master to
check three colors together.
If you place the cursor on the preview image, the portion will be enlarged and its RGB values (only
K when Color Mode is Grayscale) before and after the adjustments will be displayed.
(Threshold)
Set the boundary (threshold) at which black and white are divided. By adjusting the threshold level, you
can sharpen text in a document or reduce show-through in newspapers.
Setting Threshold
Custom
You can name and save a set of tone curve and threshold settings created with the Color Adjustment
Buttons.
Select Add/Delete... from the pull-down menu. When Color Mode is set to anything but Black and
White, the Add/Delete Tone Curve Settings dialog box opens. When Color Mode is Black and White,
the Add/Delete Threshold Settings dialog box opens.
Enter Setting Name and click Add. The name appears in Tone Curve Settings List or Threshold
Settings List.
Click Save to save.
You can load and apply the saved tone curve/threshold settings to a preview image. To load the
settings, select the saved item from the pull-down menu.
To delete an item, select it in Tone Curve Settings List or Threshold Settings List and click Delete.
Note
Save up to 20 items.
Defaults
Reset all adjustments (saturation/color balance, brightness/contrast, histogram and tone curve).
Page top
Auto Scan Mode Tab
Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Auto
Scan Mode Tab
Auto Scan Mode Tab

This mode allows you to scan easily by simply placing documents on the Platen and clicking a button.
In Auto Scan Mode, documents are automatically detected. You do not need to specify cropping frames
or make image corrections.
Supported Documents
Photos, Hagaki, business cards, magazines, newspapers, text documents and CD/DVD.
Important
The following types of documents cannot be scanned correctly.

In that case, specify the document type on the Basic Mode tab or the Advanced Mode tab and
scan again.
- Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback
pages with the spine cut off
Scan from the Basic Mode Tab or Advanced Mode Tab to reduce moire.
How to set documents
Placing Documents appears.

View scanned images
Select this checkbox to display the thumbnails of scanned images in a different window.
Auto Scan Mode Tab
Scan
Scanning starts.
Note
When scanning is completed, a dialog box prompting you to select the next action may open.
Follow the prompt to complete. For details, see Status of ScanGear dialog after scanning in "
Scan Tab" (Preferences dialog box).
Instructions
This page appears.

Preferences...
Close
Related Topic
Page top

Click Specify... in the ScanGear (scanner driver) screen to open Preferences dialog box.
In the Preferences dialog box, you can make advanced settings to ScanGear (scanner driver) functions
via the Scanner, Preview, Scan and Color Settings tabs.
Scanner Tab
Allows you to specify a folder to save images temporarily and a music file to play during or at the end of a
scan.
Scanner Tab
Preview Tab
Allows you to select what to do with Preview when ScanGear (scanner driver) is started and how to
display cropping frames after previewing images.
Preview Tab
Scan Tab
Allows you to select what to do with ScanGear (scanner driver) after scanning images.
Scan Tab
Color Settings Tab
Allows you to select how to adjust color, enable/disable Auto Tone, and specify the monitor gamma
value.
Color Settings Tab
Page top
Scanner Tab
Scanner Tab
Scanner Tab
On the Scanner tab, you can specify the following settings.
Quiet Mode
Select this checkbox to reduce scanner sound by slowing down the scanner head when previewing or
scanning documents. This checkbox is not selected by default.
Note
Scanning takes longer than usual when you enable this function.
Select Folder Where Temporary Files are Saved
Displays the folder in which to save images temporarily. To change the folder, click Browse... to specify
another one.
Sound Settings
You can set the machine to play music during/at the end of a scan.
Select the Play Music During Scanning or Play Sound When Scanning is Completed checkbox, then
click Browse... and specify a sound file.
You can specify the following files.
MIDI file (*.mid, *.rmi, *.midi)
Audio file (*.wav, *.aif, *.aiff)
MP3 file (*.mp3)
Calibration Settings
When you set Execute at Every Scan to ON, the scanner will be calibrated every time before previewing
and scanning, to reproduce correct color tones in scanned images.
Note
Even when Execute at Every Scan is set to OFF, the scanner may be calibrated automatically in
some cases (such as immediately after you turn the machine on).
Calibration may take time depending on your computer.
Page top
Preview Tab
Preview Tab
Preview Tab
On the Preview tab, you can specify the following settings.
Preview at Start of ScanGear
Select what to do with Preview when ScanGear (scanner driver) is started. Display Saved Preview
Image is selected by default.
Automatically Execute Preview
ScanGear (scanner driver) will automatically start previewing at startup.

Display Saved Preview Image
The previously previewed image will be displayed.

The Color Adjustment Button settings, the Toolbar settings, and the Advanced Mode settings are
also saved.
None
No preview image will be displayed at startup.

Note
Select None if you do not want to save the preview image.

Cropping Frame on Previewed Images
Select how to display cropping frames after previewing images. Execute Auto Cropping on Previewed
Images is selected by default.
Execute Auto Cropping on Previewed Images
The cropping frame will automatically be displayed in the document size after previewing.
Display the Last Frame on Previewed Images
A cropping frame of the same size as the last used cropping frame will be displayed after
previewing.
None
No cropping frame will be displayed after previewing.

Page top
Scan Tab
Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Scan
Tab
Scan Tab
On the Scan tab, you can specify the following settings.
Status of ScanGear dialog after scanning
Select what to do with ScanGear (scanner driver) after scanning images. Close ScanGear
automatically is selected by default.
Close ScanGear automatically
Select this to return to the original application when scanning is completed.

Do not close ScanGear automatically
Select this to return to the ScanGear (scanner driver) screen for another scan when scanning is
completed.
Display the dialog to select next action
Select this to open a dialog box and select what to do when scanning is completed.
Note
Even if Do not close ScanGear automatically or Display the dialog to select next action is set,
some applications may not support it.
Page top
Color Settings Tab
Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Color
Settings Tab
Color Settings Tab

On the Color Settings tab, you can specify the following settings.
Color Adjustment
Select either of the following. Recommended is selected by default.

This function is available when Color Mode is Color or Grayscale.
Recommended
Select this to vividly reproduce the tone of a document on the screen. It is recommended that you
normally select this setting.
Color Matching
Select this to automatically match the scanner, monitor and color printer colors, thus reducing
time and trouble to manually match the monitor and printer colors.
Color Adjustment Buttons will be disabled.
This function is available when Color Mode is Color.
- Source(Scanner): Select scanner profile.
- Target: Select target profile.
- Monitor: Select this to display preview image with optimum correction for monitor.
- Defaults: Returns to the default Color Matching settings.
None
Select this to disable color correction provided by ScanGear (scanner driver).

Note
Color Matching is available when ScanGear (scanner driver), monitor, color managementcompliant application (such as Photoshop) and printer are set up correctly.
Refer to the corresponding manual for the monitor, printer and application settings.
Always Execute the Auto Tone
Select this checkbox to always apply Auto Tone to scanned images. This checkbox is selected by
default.
Important
This function is available when Color Mode is Color or Grayscale.

You cannot select this setting when None or Color Matching is selected on the Color Settings tab.
Color Settings Tab
Note
When previewing or scanning images with plain backgrounds, the color tone may change from
the source image due to the Auto Tone function. In that case, deselect the Always Execute the
Auto Tone checkbox.
Monitor Gamma
By setting the gamma value of a monitor, you can adjust the input data to the brightness
characteristics of the monitor. Adjust the value if your monitor's gamma value does not match the
default value set in ScanGear (scanner driver), and the colors of the original image are not accurately
reflected in the monitor.
Click Defaults to return to the default Monitor Gamma value (2.20).
Note
Refer to the manual of your monitor to check its gamma value. If it is not written in the manual,
contact the manufacturer.
Page top
Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning

Adjusting the cropping frame (scan area)

Selecting the best resolution
Resolution
Learning about file formats
File Formats
Learning about Color Matching
Color Matching
Matching the colors between the document and monitor
See Monitor Gamma in the following section.

Color Settings Tab
Page top
Advanced Guide > Scanning > Scanning with Other Application Software > Appendix: Useful Information on Scanning >

You can specify the scan area by creating a cropping frame on the image displayed in the Preview area.
When you click Scan, only the portion within the cropping frame will be scanned and passed to the
application.
You can create two or more cropping frames. When you click Scan, all cropping frames will be scanned.
(Scan is repeated for each cropping frame.)
Important
You cannot create additional cropping frames when you used Multi-Crop in ScanGear's Advanced
Mode.
Cropping frame types
(1) Focus Cropping Frame (rotating thick broken lines)

The settings in Basic Mode or Advanced Mode will be applied.
(2) Selected Cropping Frame (stationary thick broken lines)
The settings will be applied to the Focus Cropping Frame and Selected Cropping Frames
simultaneously. You can select multiple cropping frames by clicking them while pressing the Ctrl key.
(3) Unselected Cropping Frame (stationary thin broken lines)
The settings will not be applied.
Initial cropping frame

A cropping frame (Focus Cropping Frame) is displayed automatically around the preview image
according to the document size. You can also create a cropping frame by dragging the mouse in the
Preview area.
Adjusting a cropping frame

The cursor will change into
when it is positioned over a cropping frame. If you click and drag
the mouse in the direction of the arrow, the cropping frame will expand or contract accordingly.
The cursor will change into
when it is positioned within a cropping frame. Click and drag the mouse
to move the entire cropping frame.
You can rotate a cropping frame 90 degrees by clicking
Aspect Ratio) is not available when Output Size is Flexible.
(Switch Aspect Ratio). However,
(Switch
In Advanced Mode, you can specify the cropping frame size by entering the values into
(Width) and
(Height) in Input Settings.

Note
Cropping frames are set according to the document size (Auto Crop) by default. For details, see
Cropping Frame on Previewed Images in " Preview Tab " (Preferences dialog box).
Creating multiple cropping frames

Click and drag the mouse in a space outside the existing cropping frame to create a new cropping frame
in the Preview area. The new cropping frame will be the Focus Cropping Frame, and the old cropping
frame will be the Unselected Cropping Frame.
You can create multiple cropping frames and apply different scan settings to each cropping frame.
You can select multiple cropping frames by clicking them while pressing the Ctrl key.
If you select multiple cropping frames and change the settings on a tab at the right of ScanGear (scanner
driver), the settings will be applied to all the selected cropping frames.
When you create a new cropping frame, it retains the settings of the latest cropping frame.
Note
Create up to 10 cropping frames.

Scanning takes longer than usual when multiple cropping frames are selected.
Deleting cropping frames

To delete a cropping frame, select it and click
Alternatively, press the Delete key.
(Remove Cropping Frame) on the Toolbar.
When there are multiple cropping frames, all the selected cropping frames (Focus Cropping Frame and
Selected Cropping Frames) are deleted simultaneously.
Page top
Resolution
Resolution
Resolution
What is Resolution?
The data in the image you have scanned is a collection of dots carrying information about brightness and
color. The density of these dots is called "resolution", and resolution will determine the amount of detail
your image contains. The unit of resolution is dots per inch (dpi). Dpi is the number of dots per square
inch (2.54 cm square).
The higher the resolution (value), the more detail in your image; the lower the resolution (value), the less
detail.
Setting the Resolution in MP Navigator EX

In MP Navigator EX, you can specify the resolution with Scanning Resolution in the Scan Settings dialog
box.
Images for Printing

Images to be printed should be scanned at a resolution that corresponds to the resolution of the printer.
For example, if you want to print using a 600 dpi black and white printer, you should set the resolution to
600dpi.
With a color printer, specifying the resolution at half the resolution of the printer should be fine. For
example, if you want to print scanned paper/photos using a 600 dpi color printer, you should set the
resolution to 300dpi. However, with a high-resolution printer, printing takes longer than usual if you set
the resolution to half the resolution of the printer.
Example of Appropriate Resolution when Printing to Scale

If you print a document at twice the size both vertically and horizontally, the resolution of the document will
be reduced by half. If the resolution of the original document is 300 dpi, the resolution of the enlarged
document will be 150 dpi. If you print the document with a 600 dpi color printer, the lack of detail in the
image may be obvious. In that case, if you scan at the Scanning Resolution of 600 dpi, the resolution will
be 300 dpi even if you double the size of document and you can print the document with sufficient quality.
Conversely, if you print a document at half scale, it should be sufficient to scan at half the resolution.
When Printing Color Photos at Twice the Size
Document resolution: 300

dpi
Scanning resolution: 600
dpi
Scale: 200%
Print at twice the size

Scanning resolution/actual scanning
resolution: 600 dpi
Printing resolution: 300

dpi
Setting the Resolution in ScanGear (Scanner Driver)

In ScanGear, you can specify the resolution with Output Resolution in Output Settings on the Advanced
Mode tab.
Resolution
Example of Appropriate Resolution when Printing to Scale

The scanning resolution is automatically set so that the value set in Output Resolution will be the
resolution of the scanned image. If you set Output Resolution to 300 dpi and scan at twice the size, the
document will be automatically scanned at 600 dpi, and the resolution of the scanned image will be 300
dpi. You can print the document with sufficient quality using a 600 dpi color printer.
When Printing L Size (8.9 cm x 12.7 cm) Photos at Twice the Size
Document resolution: 300

dpi
Output resolution: 300 dpi
Scale: 200%
Scan at twice the size

Actual scanning resolution: 600
Image resolution/printing resolution:

300 dpi
dpi
Appropriate Resolution Settings

Set the resolution according to the use of the scanned image.
For displaying on a monitor: 150 dpi
For printing: 300 dpi

When Output Size is set to Flexible in ScanGear's Advanced Mode (Select Source is Platen and the scale
is 100%):
Document
Use
Color Mode
Output
Resolution
Copying
(Printing)
Color
300 dpi
Creating a postcard
Color
300 dpi
Saving to a computer
Color
75 dpi - 300 dpi
Using on a website or attaching

to e-mail
Color
75 dpi - 150 dpi
Black and white

photo
Saving to a computer
Grayscale
75 dpi - 300 dpi
Using on a website or attaching

to e-mail
Grayscale
75 dpi - 300 dpi
Text document
Copying
Color, Grayscale or Black

and White
300 dpi
Attaching to e-mail
Color, Grayscale or Black

and White
300 dpi
Color photo
Note
Although you can change Output Resolution in ScanGear (scanner driver), it is recommended that
you scan at the default value.
If you double the resolution, the file size quadruples. If the file is too large, the processing speed will
slow down significantly, and you will experience inconvenience such as lack of memory. Set the
minimum required resolution according to the use of the image.
Page top
File Formats
File Formats
File Formats
You can select a file format when saving scanned images. You should specify the most suitable format
according to how you want to use the image on which application.
Available file formats vary by application and computer (Windows or Macintosh).
See below for the characteristics of each image file format.
BMP (Standard File Extension: .bmp)

A standard file format for Windows.
BMP is often selected for images that are used only on Windows.
JPEG (Standard File Extension: .jpg)

A file format often used on websites and for digital camera images.
JPEG features high compression rates. JPEG images slightly degrade every time they are saved, and
cannot be returned to their original state.
JPEG is not available for black and white images.
Exif (Standard File Extension: .jpeg)

A file format supported by many digital cameras.
It adds information such as the date of image capture, camera model, shutter speed, shooting mode
and comments to JPEG files.
The file format version must be Exif 2.2 or later in order to print on a Direct Print compatible printer.
TIFF (Standard File Extension: .tif)

A file format featuring a relatively high compatibility between various computers and applications. (Some
TIFF files are incompatible.) TIFF is suitable for editing saved images.
Note
MP Navigator EX supports the following TIFF file formats.

- Uncompressed, black and white binary
- Uncompressed, RGB (8 bits per channel)
- Uncompressed, YCC (8 bits per component)
- Grayscale
PDF (Standard File Extension: .pdf)

A file format developed by Adobe Systems. It can be used on various computers and operating systems.
Therefore, PDF files can be exchanged between people who use different operating systems, fonts, etc.
regardless of the differences.
Note
Only PDF files created with MP Navigator EX are supported. PDF files created or edited in other
applications are not supported.
Page top
Color Matching
Color Matching
Color Matching
Color Matching adjusts devices as shown below to match the colors of an image displayed on a monitor
or a printed image with the colors of the original document.
Example: When sRGB is selected as the output profile (target)

Input Profile (Source)
Scanner
Output Profile (Target)

sRGB
OS
Application
Application
Printer Driver
Monitor
Printer
ScanGear (scanner driver) converts the image's color space from the scanner's color space to sRGB.
When displaying on a monitor, the image's color space is converted from sRGB to the monitor's color
space based on the operation system's monitor settings and the application's working space settings.
When printing, the image's color space is converted from sRGB to the printer's color space based on the
application's print settings and the printer driver's settings.
Page top
Advanced Guide > Scanning > Other Scanning Methods


Page top
Advanced Guide > Scanning > Other Scanning Methods > Scanning with WIA Driver

You can scan an image from a WIA-compliant application and use the image in that application.
The procedure varies depending on the application. The following procedures are examples only.
For details, refer to the application's manual.
Important
In Windows 2000, you cannot scan using the WIA driver.
Scanning with WIA Driver 2.0

The following is an example of scanning using Windows Photo Gallery.

Placing Documents
2. In File, click From Scanner or Camera..., then double-click WIA Canon (model
name).
The scan setting screen appears.
3. Specify the settings.
Scanner
The currently set product name is displayed. To change the scanner, click Change... and select
the product you want to use.
Profile
Select Photo (Default) or Documents according to the document to be scanned. To save a new
Profile, select Add profile.... You can specify the details in the Add New Profile dialog box.
Source
Select a scanner type.
Paper size
This setting is not available for this machine.

Color format

File type
Select a file format from JPEG, BMP, PNG and TIFF.

Resolution (DPI)
Enter the resolution. Specify a value between 50 dpi and 600 dpi. 300 dpi is set by default.
Resolution
Brightness
Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the
image. You can also enter a value (-100 to 100).
Contrast
Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image,
thus softening the image. Moving it to the right will increase the contrast of the image, thus
sharpening the image. You can also enter a value (-100 to 100).
Preview or scan images as separate files
Select this checkbox to preview or scan multiple images as separate files.

See how to scan a picture
Click to open Windows Help and Support.
4. Click Preview to preview the image.

The preview image appears on the right.
5. Click Scan.
When scanning is completed, the scanned image appears in the application.
Scanning with WIA Driver 1.0

The following is an example of scanning using Paint.

Placing Documents
2. In File, click From Scanner or Camera.... (Select the command to scan a document
in the application.)
3. Select an image type according to the document to be scanned.
Note
To scan with the values previously set in Adjust the quality of the scanned picture, select
Custom Settings.
4. Click Adjust the quality of the scanned picture and set the preferences as required.
Brightness
Contrast
Resolution (DPI)
Enter the resolution. Specify a value between 50 dpi and 600 dpi.
Resolution
Picture type
Select the type of scan you want for your document.
Reset
Click to restore the original settings.
5. Click Scan.
When scanning is completed, the scanned image appears in the application.
Page top
Advanced Guide > Scanning > Other Scanning Methods > Scanning using the Control Panel (Windows XP Only)

You can scan images via the Control Panel of Windows XP using the WIA driver.
Windows Image Acquisition (WIA) is a driver model implemented in Windows XP. It allows you to scan
documents without using an application. Scan documents from a TWAIN-compliant application to specify
advanced settings for scanning.

2. Click Printers and Other Hardware > Scanners and Cameras, then double-click WIA
Canon (model name).
The Scanner and Camera Wizard dialog box opens.
3. Click Next.
4. Select Picture type according to the document to be scanned.
Note
To scan with the values previously set in Custom Settings, select Custom.
5. Click Custom Settings to set the preferences as required.
Brightness
Contrast
Resolution (DPI)
Enter the resolution. Specify a value between 50 dpi and 600 dpi.
Resolution
Picture type
Select the type of scan you want for your document.
Reset
Click to restore the original settings.
6. Click Preview to preview the image.

The preview image appears on the right. Drag
to specify the scan area.
7. Click Next and follow the instructions.

Page top
Printing Photographs Directly from a Compliant Device or a Wireless Comm... Page 578 of 758 pages
Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device
Printing Photographs Directly from a Compliant Device or a

Wireless Communication Device

Page top
Advanced Guide > Printing Photographs Directly from a Compliant Device or a Wireless Communication Device > Printing
Photographs Directly from a Compliant Device

Page top
Photographs Directly from a Compliant Device > Printing Photographs Directly from a Compliant Device

You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile phone
using a USB cable recommended by the device's manufacturer, and print recorded images directly
without using a computer.
Note
When printing photos with the PictBridge compliant device connected to the machine, we
recommend the use of the AC adapter supplied with the device. If you are using the device battery,
be sure to charge it fully.
Depending on the model or brand of your device, you may have to select a print mode compliant
with PictBridge before connecting the device. You may also have to turn on the device or select Play
mode manually after connecting the device to the machine.
Perform necessary operations on the PictBridge compliant device before connecting it to this
machine according to instructions given in the device's instruction manual.

2. Load paper.
3. Make sure that the proper paper source is selected.
4. Make sure that the PictBridge compliant device is turned off.
5. Connect the PictBridge compliant device to the machine using a USB cable (A)
recommended by the manufacturer of the device.
The PictBridge compliant device turns on automatically.
If your device does not turn on automatically, turn it on manually.
will appear on the LCD of the device when the machine is correctly connected.
6. Specify the print settings such as paper type and layout.
You can perform settings using the menu on the LCD of your PictBridge compliant device. Select the
size and type of paper that you loaded in the machine.
If your PictBridge compliant device does not have a setting menu, change the setting from the
machine.
7. Start printing from your PictBridge compliant device.

Important
Never disconnect the USB cable during printing unless when explicitly allowed to by the
PictBridge compliant device. When disconnecting the USB cable between the PictBridge
compliant device and machine, follow the instructions given in the device's instruction manual.
Page top
Photographs Directly from a Compliant Device > About PictBridge Print Settings


This section describes the PictBridge function of the machine. For the print settings on a
PictBridge compliant device, refer to the instructions given in the device's instruction manual.
Note
In the following description, names of setting items are given according to those used in
Canon-brand PictBridge compliant devices. Setting item names may be different depending
on the brand or model of your device.
Some setting items explained below may not be available on some devices. In this case, the
settings made on the machine are applied. Also, when some items are set to Default on a
PictBridge compliant device, the machine settings for these items are applied.
The following sizes and types of printing paper can be used when printing from a PictBridge
compliant device.
Paper size
4" x 6"/10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter), 4" x 7.1"/ 10.1
x 18 cm*2
*1 10x15 may appear on some PictBridge compliant device.
*2 Hi Vision may appear on a non-Canon brand PictBridge compliant device.
Paper type
Default (Selections based on the machine setting)

Photo:
Photo Paper Plus Glossy II PP-201/Glossy Photo Paper "Everyday Use" GP-501
/Photo Paper Glossy GP-502/Photo Paper Plus Semi-gloss SG-201/Photo
Stickers*
* When printing on sticker paper, select 10 x 15 cm/4" x 6" in Paper size. Do not
set Layout to Borderless.
Fast Photo:
Photo Paper Pro PR-201
Plain:
A4/Letter
When Paper type is set to Plain, borderless printing will be disabled even when
Layout is set to Borderless.
Layout
Default (Selections based on the machine setting), Index, Bordered, Borderless, Nup (2, 4, 9, 16)*1, 20-up*2, 35-up*3
*1 Layout compatible with A4- or Letter-sized paper and Canon-brand sticker
above.
A4/Letter: 4-up
Photo Stickers: 2-up, 4-up, 9-up, 16-up.
*2 With a Canon brand PictBridge compliant device, selecting items with "i" mark
allows you to print shooting info (Exif Data) in list format (20-up) or on the margins
of the specified data (1-up). (May not be available with some Canon-brand
PictBridge compliant devices.)
*3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with
a Canon-brand PictBridge compliant device. (May not be available with some
Canon-brand PictBridge compliant devices.)
Print date & Default (Off: No printing), Date, File No., Both, Off
file no.
Image
optimize
Default*1*2, On (Exif Print), Off, NR (Noise Reduction)*2, VIVID*2, Face*2, RedEye*2

*1 Photos are optimized for printing using the Photo optimizer pro function.
*2 Can be selected only on certain Canon-brand PictBridge compliant devices.
(May not be selected depending on the device.)
Trimming
Default (Off: No trimming), On (follow camera's setting), Off

You can change the PictBridge print settings from the PictBridge print settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the
settings on the machine.
This section describes the procedure to display the PictBridge print settings screen. For setting
items, see PictBridge print settings .
1.
2.
Select
3.
Select
4.
Select PictBridge print settings, then press the OK button.
The PictBridge print settings screen is displayed.

Page top
Photographs from a Wireless Communication Device

Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone

Page top
Setting the Page Size, Media Type, and Layout When Printing from a Mobil... Page 585 of 758 pages
Photographs from a Wireless Communication Device > Setting the Page Size, Media Type, and Layout When Printing from
a Mobile Phone
Setting the Page Size, Media Type, and Layout When Printing
from a Mobile Phone
When printing from a mobile phone through Bluetooth communication, select the page size, media type,
layout, and borderless print setting on the Mobile phone print setting screen. For details on how to print
from a computer through Bluetooth communication, refer to About Bluetooth Communication .
* The default is borderless printing on L size Photo Paper Plus Glossy II.
Displaying the Mobile phone print setting screen

This section describes how to display the Mobile phone print setting screen. For setting items,
see Mobile phone print setting .

2. Attach the optional Bluetooth Unit BU-30.
Insert the Bluetooth Unit BU-30 to the Direct Print Port.
3. Select
4. Select
5. Select Mobile phone print setting, then press the OK button.

The Mobile phone print setting screen is displayed. For the setting items, see Mobile phone
print setting.
Page top
Photographs from a Wireless Communication Device > Printing via Bluetooth Communication

This section describes the procedure to print photos through Bluetooth communication from a mobile
phone with the optional Bluetooth Unit BU-30.
When printing from a mobile phone through Bluetooth communication, refer also to your product's
instruction manual.
For the procedure to print through Bluetooth communication from the computer, refer to About Bluetooth
Communication.
Note
Mobile phones supporting OPP (Object Push Profile) or BIP (Basic Image Profile) can print photos.
Depending on your mobile phone, you may not perform printing even if your mobile phone supports
the profiles above. For information on the profiles your mobile phone supports, refer to your
product's instruction manual.
Printing through Bluetooth Communication

4. Set the page size and layout.

Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone
5.
Start printing from a mobile phone.
For the device name, select the default value Canon XXX-1 (where "XXX"
is your machine's name).

If you are required to input a passkey, input the default value "0000".
You can change the device name of the machine, passkey, and so on from the
Bluetooth settings screen.
Note
Communication is possible in a range of up to about 33 ft. / 10 m depending on

the conditions below. Printing speed may vary depending on the following
conditions:
Presence of obstacles between the communication equipment, and radio
conditions.
Presence of magnetic fields, static electricity, or electromagnetic interference.
Receiver sensitivity and antenna performance of the communication equipment.
Video files cannot be printed.
Depending on your device, data saved on a memory card may not be printed.
About transmittable data
Due to security settings on the mobile phone, downloaded content or
photos downloaded from a URL attached to an E-mail cannot be printed.
Depending on the size of a photo, it may take a while for this machine to
start printing after starting wireless communication.
Printed quality and orientation (portrait or landscape) is determined
automatically according to the shot photo size.
Depending on the photo size shot on the mobile phone, the edges of the
image may be cut off when performing borderless printing; the margin size
may change when printing with borders.
If the photo file is over 1.8 MB in size, it may not be possible to send the
file.
Page top
Photographs from a Wireless Communication Device > Printing via Bluetooth Communication > Changing the Bluetooth
Settings

As preparation for printing through Bluetooth communication, you can change the settings such as the
device name and passkey from the Bluetooth settings screen.
This section describes how to display the Bluetooth settings screen. For each setting item, see
Bluetooth settings .

3. Select
4. Select
5. Select Bluetooth settings, then press the OK button.

The Bluetooth settings screen is displayed.
Page top
Maintenance
Advanced Guide > Maintenance
Maintenance
Cleaning Your Machine
Performing Maintenance from a Computer

Page top
Advanced Guide > Maintenance > Cleaning Your Machine

Cleaning
Cleaning the Exterior of the Machine
Cleaning the Platen Glass and Document Cover

Cleaning the Inside of the Machine (Bottom Plate Cleaning)
Cleaning the Protrusions Inside the Machine

Page top
Cleaning
Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning
Cleaning
This section describes the cleaning procedure that is needed to maintain your machine.
Caution
Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as
not to scratch the surface. Paper tissue powder or fine threads may remain inside the machine and
cause problems such as Print Head blockage and poor printing results. Be sure to use a soft cloth.
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to
clean the machine, as this may cause a malfunction or damage the machine's surface.


Page top
Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning the Exterior of the Machine

Be sure to use a soft cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently.
Smooth out wrinkles on the cloth if necessary before cleaning.
Caution
Be sure to turn off the power and disconnect the power plug before cleaning the machine.
Do not use tissue paper, paper towels, rough-textured cloth, or similar materials, as this may
scratch the surface.
Page top
Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning the Platen Glass and Document Cover

Caution
With a clean, soft, lint-free cloth, wipe the Platen Glass (A) and the inner side of the Document Cover
(white sheet) (B) gently. Be sure not to leave any residue, especially on the Platen Glass.
Important
The inner side of the Document Cover (white sheet) (B) is easily damaged, so wipe it gently.
Page top
Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning the Inside of the Machine (Bottom Plate Cleaning)

This section explains how to clean the inside of the machine. If the inside of the machine becomes dirty,
printed paper may get dirty, so we recommend performing cleaning regularly.

2. Remove any paper from the Rear Tray.
3. Open the Paper Output Tray.
Put your finger in the center of the top of the Paper Output Tray and open it gently.
4. Open the Output Tray Extension.

5. Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the
paper.
6. Load this and only this sheet of paper on the Rear Tray with the open side facing to
the front.
(A) Load the paper after unfolding it.
7. Select
The Settings screen is displayed.
8. Select Maintenance, then press the OK button.

The Maintenance screen is displayed.
9. Select Bottom plate cleaning, then press the OK button.

The confirmation screen is displayed.
10. Select Yes, then press the OK button.

The paper cleans the inside of the machine as it feeds through the machine.
Check the folded part of the ejected paper. If it is smudged with ink, perform Bottom Plate Cleaning
again.
If the problem is not resolved after performing cleaning again, the protrusions inside the machine
may be stained. Clean them according to instructions.

Note
When performing Bottom Plate Cleaning again, be sure to use a new piece of paper.
Page top
Advanced Guide > Maintenance > Cleaning Your Machine > Cleaning the Protrusions Inside the Machine

If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab
or the like.
Caution
Page top
Advanced Guide > Maintenance > Performing Maintenance from a Computer


Page top
Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Print Heads

The print head cleaning function allows you to remove any blockages in the print head nozzles. Perform
print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink.
The procedure for cleaning the print heads is as follows:
Cleaning

2. Click Cleaning on the Maintenance tab
The Print Head Cleaning dialog box opens. Follow the instruction shown in the dialog box.
Click Initial Check Items to display the items you need to check before performing Cleaning.
3. Execute cleaning
Make sure that the machine is on and then click Execute.
Print head cleaning starts.
4. Complete cleaning
Next, the Nozzle Check dialog box opens.
5. Check the results

To check whether the print quality has improved, click Print Check Pattern. To cancel the check
process, click Cancel.
If cleaning the head once does not resolve the print head problem, clean it once more.
Deep Cleaning
Deep Cleaning is more thorough than Cleaning. Perform deep cleaning when two cleaning attempts do
not resolve the print head problem.

2. Click Deep Cleaning on the Maintenance tab
The Deep Cleaning dialog box opens. Follow the instruction shown in the dialog box.
Click Initial Check Items to display the items you need to check before performing Deep Cleaning.
3. Make sure that the machine is on and then click Execute.

Print head deep cleaning starts.
Important
Cleaning consumes a small amount of ink. Deep Cleaning consumes a larger amount of ink than
Cleaning.
Cleaning the print heads frequently will rapidly deplete your printer's ink supply. Consequently,
perform cleaning only when necessary.
Note
If there is no sign of improvement after Deep Cleaning, switch off the machine, wait 24 hours, and
then perform Deep Cleaning again. If there is still no sign of improvement, the ink may have run out
or the print head may be worn. For details on the remedial action to be taken, see " Machine Moves
But Ink Is Not Ejected ."
Related Topic
Page top
Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Paper Feed Rollers

The feed roller cleaning function allows you to clean the paper feed roller. Perform feed roller cleaning
when there are paper particles sticking to the paper feed roller and paper is not fed properly.
The procedure for cleaning the feed rollers is as follows:
Roller cleaning
1. Prepare the machine

Remove all sheets of paper from the paper source from which paper could not be properly fed.

3. Click Roller Cleaning on the Maintenance tab
The Roller Cleaning dialog box opens.
4. Select Rear Tray or Cassette, and click OK

The confirmation message appears.
5. Execute paper feed roller cleaning

Make sure that the machine is on and click OK.
Paper feed roller cleaning starts.
6. Complete paper feed roller cleaning

After the rollers have stopped, follow the instruction in the message, load three sheets of plain
paper into the selected paper source of the machine, and click OK.
Paper will be ejected and feed roller cleaning will be completed.

Page top
Advanced Guide > Maintenance > Performing Maintenance from a Computer > Aligning the Print Head Position

Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines.
The procedure for performing print head alignment is as follows:
Print Head Alignment

2. Click Print Head Alignment on the Maintenance tab
The Start Print Head Alignment dialog box opens.
3. Load paper in the machine

Load three sheets of A4 size or Letter size plain paper into the cassette.
4. Execute head alignment

Make sure that the machine is on and click Align Print Head.
Follow the instruction in the message.
Note
To check the current setting before you adjust the print head position, click Print Alignment
Value.
5. Check the printed pattern

Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
Clicking the patterns with the least amount of streaks in the preview window, will automatically set
their numbers in the associated boxes.
When you have entered all the necessary values, click OK.
Note
If you look at the print results and still cannot determine which pattern is the one with the least
amount of streaks, see your machine manual.
6. Check the adjustment pattern that is printed next

Follow the instruction in the message.
Page top
Advanced Guide > Maintenance > Performing Maintenance from a Computer > Checking the Print Head Nozzles

The nozzle check function allows you to check whether the print heads are working properly by printing a
nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print.
The procedure for printing a nozzle check pattern is as follows:
Nozzle Check

2. Click Nozzle Check on the Maintenance tab
The Nozzle Check dialog box opens.
To display a list of items that you should check before printing the check pattern, click Initial Check
Items.

Load a sheet of A4 size or Letter size plain paper into the cassette.
4. Print a nozzle check pattern

Make sure that the machine is on and click Print Check Pattern.
The nozzle check pattern is printed.

The Pattern Check dialog box opens.
5. Check the print result

Check the print result. If the print result is normal, click Exit.
If the print result is smudged or if there are any unprinted sections, click Cleaning to clean the print
head.
Related Topic
Page top
Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning Inside the Machine

The bottom plate cleaning function allows you to prevent smudges on the reverse side of a sheet of
paper. Perform bottom plate cleaning before you perform duplex printing.
Also perform bottom plate cleaning if ink smudges caused by something other than print data appear on
the printed page.
For details on how to load paper into the machine, see " Cleaning the Inside of the Machine (Bottom Plate
Cleaning) ."
The procedure for performing bottom plate cleaning is as follows:
Bottom Plate Cleaning

2. Click Bottom Plate Cleaning on the Maintenance tab
The Bottom Plate Cleaning dialog box opens.

As instructed in the dialog box, fold the A4 size or Letter size plain paper in half horizontally, and then
unfold the sheet.
Load the paper into the rear tray in the portrait orientation with the crest of the crease facing down.
4. Perform the bottom plate cleaning

Make sure that the machine is on and click Execute.
Bottom plate cleaning starts.
Page top
Advanced Guide > About Bluetooth Communication

Handling Precautions
Preparation to Use the Bluetooth Unit
Printing Data via Bluetooth Communication

Basic Procedure for Printing via Bluetooth Communication
Bluetooth Settings
Troubleshooting
Specifications
Page top
Advanced Guide > About Bluetooth Communication > Handling Precautions
Shipping the Product
Page top
Advanced Guide > About Bluetooth Communication > Handling Precautions > Shipping the Product

This product may not be used in countries or regions other than the country or region where it was
purchased due to local laws and regulations. Please note that the use of this product in such countries
or regions may lead to penalties and that Canon should not be liable for such punishment.
Page top
Advanced Guide > About Bluetooth Communication > Preparation to Use the Bluetooth Unit

Bluetooth Unit
Attaching to and Removing from the Printer
Page top
Bluetooth Unit
Advanced Guide > About Bluetooth Communication > Preparation to Use the Bluetooth Unit > Bluetooth Unit
Bluetooth Unit
The Bluetooth Unit BU-30 (hereafter referred to as the Bluetooth unit) is an adaptor which can be used
with a Canon IJ printer with Bluetooth interface.
By attaching the Bluetooth unit to a Canon IJ printer with Bluetooth interface, wireless printing from a
Bluetooth enabled device, such as a computer or mobile phone, is possible.
Note
Communication is possible in a range of up to about 33 ft. / 10 m depending on the conditions

below. Printing speed may vary depending on the following conditions:
-Presence of obstacles between the communication equipment and radio wave conditions.
-Presence of magnetic fields, static electricity or electromagnetic interference.
-Software and operating system to be used.
-Receiver sensitivity and antenna performance of the communication equipment.
Page top
Advanced Guide > About Bluetooth Communication > Preparation to Use the Bluetooth Unit > Attaching to and Removing
from the Printer

Attaching the Bluetooth Unit to the Printer
Removing the Bluetooth Unit from the Printer
Attaching the Bluetooth Unit to the Printer

Attach the Bluetooth unit to the Direct Print Port (A) of the printer in accordance with the following
procedure.
The external appearance may differ depending on the printer you are using.
1.
Check the Power lamp.
Make sure that the Power lamp is lit.
2.
Insert the Bluetooth unit to the Direct Print Port of the printer.
Detach the cap from the Bluetooth unit. Store the cap in a safe location.
Note
When the Bluetooth unit is properly attached to the printer, the Power lamp on the printer
flashes twice.
Removing the Bluetooth Unit from the Printer

Remove the Bluetooth unit from the Direct Print Port of the printer in accordance with the following
procedure.
1.
Remove the Bluetooth unit from the Direct Print Port of the printer.
Caution
Make sure that the lamp on the Bluetooth unit is neither lit nor flashing before you
remove the Bluetooth unit.
Important
Store the Bluetooth unit with the cap attached.

Page top
Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication

Preparation
Installing the MP Drivers
Setting the Printer
Registering the Printer

Deleting the Printer
Page top
Preparation
Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Preparation
Preparation
In order to print via Bluetooth communication with Windows, the following system requirements must be
satisfied.
Computer
A computer in which an internal Bluetooth module is installed or a computer to which an optional
Bluetooth adapter (available from various manufacturers) is attached.
OS
Microsoft Windows Vista (Satisfying any one of the following conditions is needed)
Bluetooth Devices is displayed in Hardware and Sound under Control Panel

Bluetooth Stack for Windows by Toshiba Version 5.10.04 or later is installed
Microsoft Windows XP (Satisfying any one of the following conditions is needed)
Windows XP SP2 or later is installed, and Bluetooth Devices is displayed in

Printers and Other Hardware under Control Panel
For more information about how to confirm the version of Bluetooth Stack for Windows by
Toshiba, see Check 2: Is unsupported Bluetooth driver used? .
In order to connect the Bluetooth unit and print via Bluetooth communication, the following steps are
required.
1. Check that the Bluetooth unit is properly attached to the printer.

See Attaching to and Removing from the Printer .
2. Install the MP Drivers.

See Installing the MP Drivers .
3. Check the device name of the printer using the LCD.

See Setting the Printer .
4. Register the printer as a Bluetooth device using Bluetooth Devices.

When using Windows Vista, and when Bluetooth Devices is displayed in Hardware and
Sound under Control Panel
Authenticate the printer as a Bluetooth device on Bluetooth Devices in Hardware and Sound
under Control Panel.
See Registering the Printer .
When using Windows XP SP2 or later, and when Bluetooth Devices is displayed in Printers
and Other Hardware under Control Panel
Authenticate the printer as a Bluetooth device on Bluetooth Devices in Printers and Other
Hardware under Control Panel.
See Registering the Printer .
When using a Toshiba Windows Vista or Windows XP computer

Authenticate the printer as a Bluetooth device using Bluetooth Settings*.
* When the computer which has Bluetooth Stack for Windows by Toshiba or the program
attached to the Bluetooth adapter of the option manufactured by Toshiba is used, the
computer can register a printer easily.
Bluetooth Settings can be started by clicking Start and selecting All Programs, TOSHIBA,
Bluetooth, and Bluetooth Settings.
For details on Bluetooth Settings, refer to the software application's instruction manual.
Preparation
The operations may vary depending on your operating program. In this case, refer to your
computer's operation manual.
Page top
Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Installing the MP
Drivers

Note
If you use the printer connecting with a computer, the MP Drivers have already been installed. In this
case, move to the next step.
Setting the Printer
Before connecting the Bluetooth unit to the printer for wireless printing, first the USB cable must be
connected between the printer and computer, and the MP Drivers must be installed using the Setup CDROM.
Install the MP Drivers according to your setup manual.
Page top
Setting the Printer
Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Setting the Printer
Setting the Printer

This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the
printer in preparation for Bluetooth printing.
The screens may differ depending on the printer you are using.
If you need more information about the Bluetooth settings, see Setting Bluetooth Printing .
1. Make sure that the Bluetooth unit is attached and the printer is turned on.
For information about how to attach the Bluetooth unit, see Attaching to and Removing from the
Printer .
2. Display the Bluetooth settings screen on the LCD.

For information about how to display the Bluetooth settings screen, refer to Changing the Machine
Settings on the LCD .
Note
If the Bluetooth settings screen is not displayed on the LCD, the Bluetooth unit may not be
attached correctly. Remove the Bluetooth unit from the printer and attach it once again.
For details, see Attaching to and Removing from the Printer .
If the Bluetooth settings screen still is not displayed, the Bluetooth unit may be faulty. In this
case, contact your Canon service representative.
3. Select Device name.

The Device name screen is displayed.
4. Check the device name.

The device name is necessary to register the printer as a Bluetooth device. Be sure to note the
device name.
Note
If multiple printer units with the same model name are connected to the system, assigning a
different device name to each printer is recommended for easy identification of the printer you
will use. See Bluetooth Settings Screen .
After checking the device name, press the OK button on the printer.
Setting the Printer
After checking the Bluetooth settings using the LCD, register the printer on your computer.
Page top
Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Registering the Printer

Register the printer as a Bluetooth device using Bluetooth Devices under Control Panel.
Note
The following procedure is described assuming that Windows Vista has been installed in your
computer.
Before registering the printer on Bluetooth Devices under Control Panel, enable the Bluetooth
function of your computer.
For more information, refer to your computer's operation manual.
If you want to re-register the printer as a Bluetooth device, first delete the registered printer, and then
re-register it.
See Deleting the Printer .
1. Log into a user account with the administrator privilege.

2. Click Control Panel, then Bluetooth Devices under Hardware and Sound.
In non-Vista Windows, click Control Panel, Printers and Other Hardware, then Bluetooth Devices.
3. Click Add on the Devices page.
Add Bluetooth Device Wizard will start.
4. Make sure that the printer is turned on, check the My device is set up and ready to
be found check box and then click Next.
5. Select the device name of the printer and click Next.
Select the same device name as that checked under Setting the Printer .
Note
If the device name is not displayed, see Check 3: Is the printer name which you want to register
displayed in Printer List? .
6. Select Don't use a passkey, and then Next.
Note
If you set a passkey on the printer, select Use the passkey found in the documentation and
input the passkey then click Next.
For more information about a passkey, see Bluetooth Settings Screen .
7. Click Finish.
8. Check that the device name selected at step 5 is registered on the Devices page,
and click OK.
Now, the settings for printing via Bluetooth communication are ready.
Note
In Windows Vista, the Windows needs to install driver software for your Bluetooth Peripheral
Device screen may be displayed automatically. In this case, click Don't show this message
again for this device.
Page top
Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Deleting the Printer

This section describes the procedure to delete the registered printer.
If you want to re-register the printer as a Bluetooth device, first follow the procedure below to delete the
printer, and then re-register it.
For the procedure to re-register the printer, see Registering the Printer .

2. Click Control Panel, then Printers under Hardware and Sound.
When using non-Vista Windows, click Control Panel, then Printers and Faxes under Printers and
Other Hardware.
3. Click the icon of the printer used for printing via Bluetooth communication.
4. Select Delete from the Organize menu.
When using non-Vista Windows, select Delete from the File menu.
Page top
Advanced Guide > About Bluetooth Communication > Basic Procedure for Printing via Bluetooth Communication

Printing with Computers
Printing with Bluetooth Compliant Devices other than a Computer
Page top
Advanced Guide > About Bluetooth Communication > Basic Procedure for Printing via Bluetooth Communication > Printing
with Computers

When using Bluetooth communication, also refer to the computer's instruction manual.
When printing from a Bluetooth compliant device other than a computer, see Printing with Bluetooth
Compliant Devices other than a Computer .
Note
Depending on your application program, operations may differ. For details, refer to the instruction
manual of your software application.
The steps described in this section are for printing in Windows Vista.
Bluetooth communication distance: Approx. 33 ft./10 m in normal environment.
The distance may vary depending on the radio conditions or the communication equipment.
1. Turn on the printer and load paper.

2. Create a document or open a file to print using an appropriate application software.
3. Open the printer properties dialog box.
1. Select Print on the application software's File menu.
The Print dialog box opens.

2. Select the printer to which you attached the Bluetooth unit such as Canon XXX Printer (Copy X)
from Select Printer.
3. Click Preferences (or Properties).
The Main sheet of the Printing Preferences dialog box is displayed.
Note
The printer registered on Bluetooth Devices is displayed as Canon XXX Printer (Copy X).
"X" is a device name or a digit. The number of digits may differ depending on the printer.
4. Specify the required settings.
1. Select the media type of the loaded paper in Media Type.

2. Set Print Quality and Color/Intensity as needed.
Note
For details on the print settings, refer to Various Printing Methods .

3. Click OK.
The Print dialog box is displayed.
5. Click Print (or OK) to print the document.
Printing begins.
Note
When you use a USB cable for printing, select Canon XXX Printer from Select Printer.
To cancel a print job in progress, press the Stop button on the printer or click Cancel Printing
on the printer status monitor. After printing is canceled, a sheet of paper may be ejected with no
printing results.
To display the printer status monitor, click Canon XXX Printer (Copy X) on the taskbar.

Page top
Printing with Bluetooth Compliant Devices other than a Computer
Advanced Guide > About Bluetooth Communication > Basic Procedure for Printing via Bluetooth Communication > Printing
with Bluetooth Compliant Devices other than a Computer
Printing with Bluetooth Compliant Devices other than a

Computer
The LCD of the printer allows you to perform settings for printing using Bluetooth compliant devices other
than a computer.
When you print with one of these devices, also refer to your product's instruction manual.
When printing from a computer, see Printing with Computers .

Note
Mobile phones, PDAs and digital cameras supporting OPP (Object Push Profile) or BIP (Basic
Imaging Profile) can print photos.
Depending on your product, you may not perform printing even if your product supports the profiles
above. For details of profiles, refer to your product's instruction manual.
1. Turn on the printer and load paper.

2. Display the Mobile phone print settings or Mobile phone settings screen on the LCD
and set the media type and the paper size.
For information about how to display the Mobile phone print settings or Mobile phone settings
screen, refer to Changing the Machine Settings on the LCD .
3. Start printing from the Bluetooth compliant device.

When you select the device name, select the initial value of the printer "Canon XXX-1" (where "XXX"
is your printer's name).
If you are required to input the passkey, input the initial value "0000".
You can change the device name of the printer or passkey on the Bluetooth settings screen on the
LCD.
Setting Bluetooth Printing
Page top
Bluetooth Settings
Advanced Guide > About Bluetooth Communication > Bluetooth Settings
Bluetooth Settings
Bluetooth Settings Screen

Page top
Advanced Guide > About Bluetooth Communication > Bluetooth Settings > Setting Bluetooth Printing

1. Make sure that the printer is turned on, and attach the Bluetooth unit.
Note
When the Bluetooth unit is properly attached to the printer, the Power lamp on the printer
flashes twice.
2. Display the Bluetooth settings screen on the LCD.

For information about how to display the Bluetooth settings screen, refer to Changing the Machine
Settings on the LCD .
3. Select the contents which you want to set on the LCD.

Note
For information about how to set a media type and a paper size when printing from a mobile
phone, refer to Changing the Machine Settings on the LCD .
Page top
Advanced Guide > About Bluetooth Communication > Bluetooth Settings > Bluetooth Settings Screen

The screens may differ depending on the printer you are using.
1. Device name
Displays the device name of the printer to which the Bluetooth unit is attached.
Device name Screen
2. Access refusal
Selecting ON or Enable will disable searching of this printer by a Bluetooth compatible device.
Access refusal Screen
3. Security
Select Enable and then specify the security mode to activate the passkey set on the Passkey screen.
Security Screen
4. Passkey
You can change the passkey. The passkey refers to an identification number to be determined. It is
used to prevent unwanted access from other Bluetooth devices. The initial value is set to 0000.
Passkey Screen
Device name Screen

Allows you to set the device name of the printer on a Bluetooth device.
Ex:
When you select MP630 series-2, the printer name displayed on the Bluetooth device is Canon
MP630 series-2.
The initial value is set to MP630 series-1.
Access refusal Screen

When you search from a Bluetooth device, you can enable or disable the display of the printer
name.
ON or Enable
Disables searching from a Bluetooth device.
OFF or Disable (Default setting)
Enables searching and printing from a Bluetooth device.
Security Screen
Enable
Selecting Enable allows you to choose either of the security modes below.
Mode 3(recommended)
This mode is activated on link level enforced security.
The passkey will be required when a Bluetooth device communicates with the printer.
Normally select this mode.
Mode 2
This mode is activated on service level enforced security.
The passkey will be required when printing through the Bluetooth communication.
After setting the security mode, we recommend making a trial print through Bluetooth
communication. If printing does not start, change the security mode and try again.
Disable (Default setting)

When you register the printer, you are not required to input a passkey.
Setting a passkey will prevent unwanted access from other Bluetooth devices. You can
change the passkey on the Passkey screen.
Passkey Screen
When you select Enable on the Security screen, you are required to set a passkey to register the
printer on other Bluetooth devices.
After you change the passkey, you may be asked to input the passkey on the Bluetooth devices you
were able to print from before the passkey was changed. In this case, input the new passkey.
Page top
Troubleshooting
Advanced Guide > About Bluetooth Communication > Troubleshooting
Troubleshooting
Troubleshooting
Printer Cannot be Registered
Page top
Troubleshooting
Advanced Guide > About Bluetooth Communication > Troubleshooting > Troubleshooting
Troubleshooting
This section describes how to solve the problems occurred during the use of the Bluetooth unit.
Problems related to the printer's hardware, MP Drivers installation, and so on, are also described in
Troubleshooting.
Page top
Advanced Guide > About Bluetooth Communication > Troubleshooting > Printer Cannot be Registered

Check 1: Have MP Drivers been installed?
Install the MP Drivers referring to your setup manual.
Check 2: Is unsupported Bluetooth driver used?

Confirm that the Bluetooth driver installed on your computer is supported.
Toshiba Windows Vista or Windows XP computer
In Windows Vista, click Start, and select All Programs, TOSHIBA, Bluetooth, then Bluetooth
Settings.
On the Bluetooth Settings dialog, click the help button, the version number, then make sure that
the version number is 5.10.04 or later.
In Windows XP, click Start, and select All Programs, TOSHIBA, Bluetooth, then Bluetooth
Settings.
On the Bluetooth Settings dialog, click the help button, the version number, then make sure that
the version number is 3.00.10 or later.
Windows Vista (except for Toshiba Windows Vista computers)
Log into a user account with the administrator privilege, and click Control Panel, then Hardware
and Sound.
Make sure that the
Bluetooth Devices icon is displayed in the dialog.
Windows XP SP2 or later (except for Toshiba Windows XP computers)
Log into a user account with the administrator privilege, click Control Panel, then Printers and
Other Hardware.
Make sure that the
Bluetooth Devices icon is displayed in the dialog.
The operations may vary depending on your operating program. In this case, refer to your computer's
operation manual.
Check 3: Is the printer name which you want to register displayed in

Printer List?
Make sure that the printer is turned on.
Make sure that the Power lamp is lit.
Make sure that the printer is not operating.
Check whether the Bluetooth unit is usable.
Make sure that the Bluetooth settings screen can be displayed on the LCD of the printer. If the
screen cannot be displayed, Bluetooth communication is disabled. Remove the Bluetooth unit
from the printer and attach it again.
Make sure that the Bluetooth settings screen can be displayed on the LCD of the printer, and try
to register again.
Check whether access from a Bluetooth compatible device is refused.
Check the printer access setting displaying the Bluetooth settings screen on the LCD of the
printer.
1. Display the Bluetooth settings screen on the LCD of the printer.

For information about how to display the Bluetooth settings screen, refer to Changing the
Machine Settings on the LCD .
2. Select Access refusal.

3. Select OFF or Disable and press the OK button on the printer.
Page top
Advanced Guide > About Bluetooth Communication > Troubleshooting > Printing Does Not Start

Check 1: Is Bluetooth unit ready for use?
Make sure that the Bluetooth settings screen can be displayed on the LCD of the printer. If the
screen cannot be displayed, Bluetooth communication is disabled. Remove the Bluetooth unit from
the printer and attach it once again.
Make sure that the Bluetooth settings screen can be displayed on the LCD of the printer, and try to
print again.
If the Bluetooth settings screen still is not displayed after you remove the Bluetooth unit from the
printer and attach it again, the Bluetooth unit may be faulty. In this case, contact your Canon service
representative.
Check 2: Is there a problem with the location of the printer or is the
distance between the printer and computer too great?

The maximum communication distance between the printer and a computer is about 33 ft./10 m, but
it varies depending on the following conditions:
Presence of obstacles between the communication equipment and radio wave conditions
Location where magnetic fields, static electricity, or radio interference occurs
Type of software and operating system used
Receiver sensitivity and antenna performance of the communication equipment
Change the printer installation place or move the printer closer to the computer.
Check 3: Is the printer to be used selected correctly?

Follow the procedure described below to select the printer to which the Bluetooth unit is attached.

When using non-Vista Windows, click Control Panel, then Printers and Faxes under Printers
and Other Hardware.
3. Click the
icon of the printer to be used for printing via Bluetooth

communication.
By default, the icon name is Canon XXX Printer (Copy X).
Note
4. Select Properties from the Organize (File in non-Vista Windows) menu.

5. Click the Ports tab and select an applicable printer from Port.
It may vary depending on how you authenticate the printer.
When authenticating the printer as a Bluetooth device in Control Panel
BTHnnn (Canon XXX Printer (Copy X)) ("n" is a digit).
When authenticating the printer as a Bluetooth device using Bluetooth Settings built in the
computer
TBPnnn (Canon XXX Printer (Copy X)) ("n" is a digit)
For more information about how to register the printer, see Register the printer as a Bluetooth
device using Bluetooth Devices. in Preparation .
6. Click OK.
Check 4: Is the message "This document failed to print" displayed?

Do not retry printing. Check the error message on the LCD.
Clear the error according to An Error Message Is Displayed on the LCD .
When you use a Microsoft Bluetooth driver, make sure that the Printing (HCRP) service is
effective on your computer.
Click Control Panel, Bluetooth Devices under Hardware and Sound (Printers and Other
Hardware in non-Vista Windows), then select the printer to be used for Bluetooth
communication and click Properties.
Make sure that Printing (HCRP) on the Services sheet is checked.
If Printing (HCRP) is not checked or the Printing (HCRP) service is not detected, follow the
procedure below and register the printer again.

When using non-Vista Windows, click Control Panel, then Printers and Faxes under Printers
and Other Hardware.
2. Click the
icon of the printer for printing via Bluetooth communication.
3. Select Delete from the Organize (File in non-Vista Windows) menu.

4. Authenticate the printer as a Bluetooth device on Bluetooth Devices in Control
Panel.
For more information about the procedure, see Registering the Printer .
This message is displayed when the print job is sent from the Bluetooth device while another
print job through the USB port is being printed out.
Printing will begin automatically when the print queue is finished.
Printing cannot be carried out with Bluetooth communication from more than one computer at
the same time. In this case, this message is displayed on the computer during standing by.
Printing will begin automatically when the print queue is finished.
Check 5: Were the MP Drivers installed after printer registration on
Bluetooth Devices?
If you have installed the MP Drivers after registering the printer as a Bluetooth device on Bluetooth
Devices, delete the printer and then register it again.
For more information about the procedure, see Preparation.

Page top
Specifications
Advanced Guide > About Bluetooth Communication > Specifications
Specifications
Communication
method
Bluetooth v2.0
Maximum Speed
1.44 Mbps
Output
Bluetooth Power Class 2
Communication
distance
Line-of-sight distance: approx. 33 ft./10 m *

* It may vary depending on factors including the presence of obstacles between
communication equipment, radio wave conditions, the presence of magnetic
fields around microwave ovens and locations where electrostatic and radio
interference occur, the types of software and operating systems used, and
receiver sensitivity and antenna performance of communication equipment.
Profile
SPP(Serial Port Profile)

OPP(Object Push Profile)
BIP(Basic Imaging Profile)
HCRP(Hardcopy Cable Replacement Profile)
Compatible PCs
A computer in which an internal Bluetooth module is installed or a computer to

which an optional Bluetooth adapter (available from various manufacturers) is
attached.
OS/Software:
Microsoft Windows Vista (Satisfying any one of the following conditions is needed)
Bluetooth Devices is displayed in Hardware and Sound under Control Panel
Microsoft Windows XP (Satisfying any one of the following conditions is needed)
Windows XP SP2 or later is installed, and Bluetooth Devices is displayed in
Printers and Other Hardware under Control Panel
Frequency band
2.4 GHz band (2.400 GHz to 2.4835 GHz)
Power supply
Supplied from the Direct Print Port on the printer, DC 4.4 V to 5.25 V
Maximum power
consumption
500 mW (MAX)
Operating
temperature
5 to 35C (41 to 95F)
Operating humidity 10 to 90% RH (no condensation)
Dimensions (Width 18.5 (W) x 47.5 (D) x 8.7 (H) mm (with cap attached)
x Depth x Height)
0.73 (W) x 1.87 (D) x 0.35 (H) inches
Weight
Approx. 7 g (0.25 oz)

Page top
Advanced Guide > Changing the Machine Settings

Changing Machine Settings from Your Computer
Page top
Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD


Print settings
Advanced settings
Bluetooth settings
Language selection
Reset setting
Page top
Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Changing the Machine
Settings on the LCD

This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amount as an example.
2. Select
The Settings screen is displayed.
3. Select
The Device settings screen is displayed.
4. Select the setting item, then press the OK button.
The setting screen for the selected item is displayed.
5. Select the menu, then press the OK button.
6. Select the setting item, then press the OK button.
Print settings
Advanced settings
Bluetooth settings
Language selection
Reset setting

Specifies the paper source for A4, Letter, A5, and B5 plain paper.
Note
A4, Letter, A5, and B5 paper can be loaded in the Cassette. Load on the Rear Tray for the
other sizes of paper.
Print settings

Use this setting only if the print surface becomes smudged.
Important
Be sure to set this back to OFF after printing since it may result in lower printing speed or
lower print quality.
Extended copy amount

Selects the amount of image that extends off the paper when printing in Borderless (full).
Important
This setting can be applied only when copy or easy photo reprint mode is selected.
Note
If printouts contain margins even though you are printing in Borderless, specifying Large
for this setting may help solve the problem.
Advanced settings
Date display
Changes the display format of shooting dates when printed.
Note
When Date ON is selected on the advanced print settings screen in memory card mode,
the shooting date is printed in the date display format you selected. For print settings,
see Setting Items .
The shooting date format is as specified in the DPOF setting from DPOF printing.
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
Remove the memory card before changing this setting. For details, see Setting Up the
Card Slot as the Memory Card Drive of the Computer .
If you set this setting to Writable from PC, card direct printing cannot be done. After you
finish operation of the memory card dedicated drive, be sure to set it back to Not writable
from PC.
Slide show setting

Specifies the image display quality of the slide show.
Note
When Image quality: Standard is selected, images are displayed at about 5-second
intervals. When Image quality: High is selected, images are displayed at different time
intervals according to their resolutions.
Quiet mode
Enables this function on the machine if you want to reduce the operating noise, such as when
printing at night.
Enabling this function reduces the noises generated while:

Copying,
Printing from a memory card,
Printing from a PictBridge compliant device,
Printing from a wireless communication device, and
Printing a template form.
Important
Printing speed may be reduced compared to when this setting is set to OFF.
This function may not be so effective depending on the print quality setting. Furthermore,
certain noise, such as when the machine is preparing for printing, is not reduced.
Note
The noises generated while scanning or printing from the computer can also be
reduced. To reduce these noises, you need to configure the settings on the computer.
For the noises while scanning, refer to Scanner Tab .
For the noises while printing from the computer, refer to Reducing the Machine Noise .
Guide display settings

Changes the time before the guidance is displayed on the LCD, or selects not to be
displayed.
Key repeat
Enables/Disables continuous input by pressing and holding down the
button when setting the number of copies, the zoom ratio, etc.
, or

When printing from a mobile phone through Bluetooth communication, select the print settings
such as page size, media type, layout, and so on.
For details on how to print from a mobile phone through Bluetooth communication, see Printing
Photographs from a Wireless Communication Device .
Note
This menu is displayed only when the optional Bluetooth Unit is connected.
1.
Select the page size for printing photos saved on a mobile phone.
2.
Select the media type for printing photos saved on a mobile phone.
3.
Select Image optimizer ON to correct and smooth out the jagged contours when printing.
4.
Select the layout of the photos according to the paper for printing.
Sticker print:
Stickers x16, Stickers x9, Stickers x4, Stickers x2, Free-cut stickers 1, Free-cut stickers 2, Freecut stickers 3, Free-cut stickers 4
Printing on paper other than sticker:
Bordered x 1, x 2, x 4, x 8
Borderless x 1, x 2, x 4, x 8
Mixed 1, 2, 3
Note
Mixed 1, Mixed 2, or Mixed 3 can be selected only when the page size is set to A4 or 8.5" x
11" (LTR).
Bluetooth settings
You can change the device name of the machine, passkey, and so on in the Bluetooth settings.
For details on how to print from a mobile phone through Bluetooth communication, see Printing
Photographs from a Wireless Communication Device .
For details on how to print from a computer through Bluetooth communication, refer to About
Bluetooth Communication .
Note
Bluetooth settings is displayed only when the optional Bluetooth Unit is attached.
Device name:
Specifies the name of this machine that is displayed on a Bluetooth compatible device.
For example, if you set it to XXX-2, the machine will be displayed as "Canon XXX-2" on the
Bluetooth device. The default value is XXX-1 (where "XXX" is your machine's name).
Access refusal:
Selecting ON will disable searching of this machine by a Bluetooth compatible device.
Security:
When you select Enable, the passkey set on the Passkey screen becomes effective. Setting
the passkey prevents unwanted access from other Bluetooth devices. You can choose either
of the security modes below.
Mode 2
This mode is activated on service level enforced security.
The passkey will be required when printing through the Bluetooth communication.
After setting the security mode, we recommend making a trial print through Bluetooth
communication.
If printing does not start, change the security mode and try again.
Mode 3 (recommended)
This mode is activated on link level enforced security.
The passkey will be required when a Bluetooth device communicates with the
machine.
Normally select this mode.
Passkey
Changes the passkey. The passkey is a four-digit number used to prevent unwanted access
from other Bluetooth devices.
The initial value is 0000.
After you change the passkey, you may be required to input the new passkey on a Bluetooth
device, even though it had previous access to the machine. In this case, input the new
passkey on the device.

You can change the print settings when printing from a PictBridge compliant device.
Set the print settings to Default on the PictBridge compliant device when you want to print
according to the settings on the machine.
See Settings on a PictBridge Compliant Device to change print settings from the PictBridge
compliant device.
Photo print setting

Select the print quality, when printing directly from a PictBridge compliant device.
1.
Select the paper size, when printing directly from a PictBridge compliant device.
When you perform PictBridge settings from the machine, set Paper type to Default on the
PictBridge compliant device.
2.
Select the media type, when printing directly from a PictBridge compliant device.
When you perform PictBridge settings from the machine, set Paper type to Default on the
3.
Select the print quality, when printing directly from a PictBridge compliant device.
4.
When you perform PictBridge settings from the machine, set Layout to Default on the
5.
Select automatic image correction or manual image correction.
When Auto photo fix ON is selected, the scene or person's face of a shot photo is
recognized and the most suitable correction for each photo is made automatically. It
makes a darkened face by backlight brighter to print. It also analyzes a scene such as
scenery, night scene, person, etc. and corrects each scene with the most suitable color,
brightness, or contrasts automatically to print.
Note
After selecting Auto photo fix ON, select Red-Eye correc. ON or Red-Eye correc. OFF.
When Manual correction is selected, the setting items 6 to 15 below can be specified. Set
Image optimize to Default on the PictBridge compliant device.
6.
Photo opt. pro
Automatically optimizes brightness and tone of a photo.
7.
Vivid photo
Makes green and blue more lively.
8.
Face brightener
9.
Noise reduction
Reduces the noise on blue areas like the sky as well as on black areas.
10.
Image optimizer
Corrects and smoothes the jagged contours for printing.
11.
Red-Eye correc.
Corrects red eyes in portraits caused by flash photography.
12.
Brightness
Adjust brightness.
13.
Contrast
Adjust contrast.
14.
Color hue
Adjust color hue. For example, you can increase red or yellow to adjust the skin tone.
15.
Effects
Applies special effects to the photo, such as printing in sepia tones or with a sketch
illustration like effect.
Language selection
Changes the language for LCD messages and menus.
Reset setting
You can change the settings back to the default, except for the LCD language and the current
position of the Print Head.
Page top
Advanced Guide > Changing the Machine Settings > Changing Machine Settings from Your Computer

Changing the Print Options
Saving a Changed Printing Profile
Reducing the Machine Noise

Page top
Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Changing the Print
Options

You change detailed print driver settings for print data that is sent from an application software.
With some applications, part of the image data may be cut off, the paper source during printing may differ
from the driver settings, or printing may fail. These are the only instances in which you would need to
check this check box.
The procedure for changing the print options is as follows:

2. Click Print Options... on the Page Setup tab
The Print Options dialog box opens.
3. Change the individual settings

If necessary, change the setting of each item, and then click OK.
The Page Setup tab is displayed again.

Page top
Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Saving a Changed
Printing Profile

You can assign a name to the settings made on the Main, Page Setup, and Effects tabs and save them
as a printing profile. The saved printing profile can be retrieved and used from the Profiles tab at any
time. Unnecessary printing profiles can be deleted at any time.
The procedure for registering a printing profile is as follows:
Registering a printing profile

2. Set the necessary items
Make your desired settings on the Main, Page Setup, and Effects tabs.
3. On the Profiles tab, click Add to Profiles...
The Add to Profiles dialog box opens.
4. Save the settings

Set Name, Icon, and Description, then click OK.
The profile is saved and the Profiles tab is displayed again.
The name and icon are added to the Printing Profiles list.
Note
If you install the printer driver again or upgrade the version of the printer driver, the print settings you
registered will be deleted from Printing Profiles.

Registered print settings cannot be saved and preserved. In this case, register the print settings
again.
Using registered print settings
1. Select the print settings to be used

Select a printing profile in the Printing Profiles list on the Profiles tab.
The parameters and settings of the profile are displayed in the Details box.
2. Retrieve from profiles

Click Retrieve from Profiles.
Click OK when a message appears.
Settings of the selected profile are applied to the Main, Page Setup, and Effects tabs.
Note
If you want to revert a profile to the default settings, select Default Settings in the Printing Profiles list
and click Retrieve from Profiles. Click OK on the confirmation message window. The settings which
were made on the Main, Page Setup, and Effects tabs are reverted to the default settings.
Deleting unnecessary printing profile
1. Select the printing profile to be deleted

Select the printing profile you want to delete from the Printing Profiles list on the Profiles tab.
2. Delete the printing profile

Click Delete. When the confirmation message appears, click OK.
The selected printing profile is deleted from the Printing Profiles list.
Note
Current Settings and Default Settings cannot be deleted.

Page top
Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Setting the Paper
Source for Plain Paper

When you select Automatically Select from Paper Source, you can use the printer driver to select the
paper source for plain paper.
The procedure for setting the paper source is as follows:
Paper Source Setting for Plain Paper

2. Click Paper Source Setting for Plain Paper on the Maintenance tab
The Paper Source Setting for Plain Paper dialog box opens.
3. Transmit the settings

Select the paper source for plain paper, and then click the Send button.
The selected settings are enabled hereafter.

Important
The descriptions in the machine manual assume that the plain paper is supplied from the
cassette. If you change the paper source setting, replace all instances of "cassette" with the new
paper source.
Page top
Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Managing the
Machine Power

This function allows you to manage the machine power from the printer driver.
The procedure for managing the printer power is as follows:
Power Off
The Power Off function turns off the machine. If you use this function, you will not be able to turn the
machine on from the printer driver.

2. Execute power off
Click Power Off on the Maintenance tab. When the confirmation message appears, click OK.
The machine power switches off, and the Maintenance tab is displayed again.
Page top
Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Reducing the
Machine Noise

This function allows you to reduce the operating noise of the machine. Select if you wish to reduce the
operating noise of the printer at night, etc.
Using this function may lower the print speed.
The procedure for changing the quiet mode settings is as follows:
Quiet Mode

2. Click Quiet Mode on the Maintenance tab
The Quiet Mode dialog box opens.
3. Set the silent function

If necessary, specify one of the following items:
Do not use quiet mode
The operating noise of the machine is at normal volume.
Always use quiet mode

Select this option when you wish to reduce the operating noise of the machine.
Use quiet mode within specified time
The operating noise of the machine can be reduced during a specified period of time.
Set the Start time and End time when you wish the quiet mode to be activated.
Important
The time specified in Start time and in End time must be different.

Make sure that the machine is on and click Send.
The selected settings are enabled hereafter.

Note
The effects of the quiet mode may be less depending on the paper source and the print quality
settings.
Page top
Advanced Guide > Changing the Printer Settings > Changing Printer Settings from Your Computer > Changing the
Machine Operation Mode

This function allows you to switch between various modes of machine operation.
The procedure for changing the printer settings is as follows:
Custom Settings

2. Make sure that the machine is on, and then click Custom Settings on the
Maintenance tab
The Custom Settings dialog box opens.
Note
If the machine is off or bi-directional communication is disabled, a message may appear

because the computer cannot collect the machine status.
If this happens, click OK to display the most recent settings specified on your computer.
3. If necessary, complete the following settings:

The printer can increase the gap between the print head and the paper during high-density printing
to prevent paper abrasion.
Check this check box to use this function.
Ink Drying Wait Time
You can set the length of the machine rest time until printing of the next page begins. Moving the
slider to the right increases the pause time and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page dries,
increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.

Click Send. When the confirmation message appears, click OK.
The machine runs in the changed mode hereafter.
Page top
Troubleshooting
Advanced Guide > Troubleshooting
Troubleshooting
If an Error Occurs




Print Head Holder Does Not Move to the Position for Replacing
Paper Does Not Feed from the Paper Source Specified in the Printer Driver
Paper Jams
For Windows Users


Software Problems
FAQs

Page top
If an Error Occurs
Advanced Guide > Troubleshooting > If an Error Occurs
If an Error Occurs
When an error occurs in printing such as the machine is out of paper or paper is jammed, a
troubleshooting message is displayed automatically. Take the appropriate action described in the
message. The message may vary depending on the version of your operating system.
In Mac OS X v.10.5.x:
In Mac OS X v.10.4.x or Mac OS X v.10.3.9:
If an Error Occurs
Page top
Advanced Guide > Troubleshooting > The Machine Cannot Be Powered On

Check 1: Press the ON button.
Check 2: Make sure that the power plug is securely plugged into the
Power Cord Connector of the machine, then turn it back on.
Check 3: Unplug the machine from the power supply, then plug the
machine back in and turn the machine back on after leaving it for at
least 5 minutes.
Page top
Advanced Guide > Troubleshooting > An Error Message Is Displayed on the LCD

If an error message is displayed on the LCD, take the corresponding action described below.
Message
The following ink may have run out.
Replacing the ink tank is
recommended.
U041
Action
If the lamp on the ink tank is flashing, ink may have run out.
Replacing the ink tank is recommended.
If printing is in progress and you want to continue printing,
press the OK button with the ink tank installed. Then printing
can continue. Replacing the ink tank is recommended after
the printing. The machine may be damaged if printing is
continued under the ink out condition.
Routine Maintenance
Note
If multiple ink lamps are flashing red, see Routine

Maintenance and check the status of each ink tank.
Print head is not installed.
Install the print head.
U051/
The type of print head is incorrect.
Install the correct print head.
U052
Follow the directions given in your setup sheet to install the

Print Head.
If the Print Head is already installed, remove the Print Head
once and then reinstall it.
If the error is not resolved, the Print Head may be damaged.
Contact your Canon service representative.
Some ink tanks are not installed in

place.
U072/
More than one ink tank of the following
color is installed.
U071
Some ink tanks are not installed in the correct position.

(The lamp on the ink tank flashes.)
More than one ink tanks of the same color are installed.
(The lamp on the ink tank flashes.)
Confirm that the ink tanks are installed in the appropriate
positions.
Routine Maintenance
The remaining level of the following ink

cannot be correctly detected.
Replace the ink tank.
U130
The remaining ink level cannot be correctly detected. (The

lamp on the ink tank flashes.)
Replace the ink tank and close the Scanning Unit (Cover).
Printing with an ink tank that was once empty may damage
the machine.
If you want to continue printing in this condition, you need to
release the function for detecting the remaining ink level.
Press and hold the Stop button for at least 5 seconds, and
then release it.
With this operation, releasing the function for detecting the
remaining ink level is memorized Please be advised that
Canon shall not be liable for any machine malfunction or
damage caused by refilled ink tanks.
Routine Maintenance
Note
If the function for detecting the remaining ink level is

disabled, the ink tank in gray is displayed on the LCD
when checking the current ink level.
Routine Maintenance
The following ink tank cannot be

recognized.
U043
U140
U150
The ink tank is not installed. Install the ink tank.

Routine Maintenance
The ink tank is not compatible with this machine. (The
lamp on the ink tank is off.)
Install an appropriate ink tank.
Routine Maintenance
An ink tank error has occurred. (The lamp on the ink tank
is off.)

Routine Maintenance
The following ink has run out.

U163
Ink has run out. (The lamp on the ink tank flashes.)
Replace the ink tank and close the Scanning Unit (Cover).
Printing under the current condition may damage the
machine.
If you want to continue printing in this condition, you need to
release the function for detecting the remaining ink level.
Press and hold the Stop button for at least 5 seconds, and
then release it.
With this operation, releasing the function for detecting the
remaining ink level is memorized. Please be advised that
Canon shall not be liable for any malfunction or trouble
which may be caused by continuation of printing under the
ink out condition.
Routine Maintenance
Note
If the function for detecting the remaining ink level is

disabled, the ink tank in gray is displayed on the LCD
when checking the current ink level.
Routine Maintenance
There are no photos in memory card.
There is no image data saved on the memory card that

can be read by this machine.
The machine may not recognize the file if the file name or
the folder path contains certain characters. Use only
alphanumeric characters.
Photo data edited or processed on a computer must be
printed from the computer.
Contact the support center or service

center for ink absorber replacement.
Press OK to continue printing.
The ink absorber is becoming full.

The machine has a built-in ink absorber to hold the ink used
during Print Head Cleaning.
Press the OK button to cancel the error so you can continue
printing. Before the ink absorber becomes completely full,
contact a Canon service representative. (You will need to
replace a particular part of the machine.)
Ink absorber full.

Service required.
The ink absorber has become full.

The machine has a built-in ink absorber to hold the ink used
during Print Head Cleaning.
When the ink absorber becomes completely full, contact a
Canon service representative. (You will need to replace a
particular part of the machine.)
Timeout error has occurred.
Some errors occurred while copying and a certain time

passed.
Press the OK button to dismiss the error, and try to copy
again.
The device may be incompatible.

Remove the device and check the
manual supplied with the connected
device.
Check the device connected to the Direct Print Port.

Printing photos directly is possible with a PictBridge
compliant device or the optional Bluetooth Unit BU-30.
A communication time out occurs if an operation takes
too long or if it takes too much time to send data. This
may cancel printing. In such cases, disconnect and
reconnect the USB cable.
When printing from a PictBridge compliant device,
depending on the model or brand of your device, you may
have to select a PictBridge compliant print mode on the
device before connecting it to the machine. You may also
have to turn on your device or select Play mode manually
after connecting the device to the machine. Perform
necessary operations before connecting your device
referring to its instruction manual.
If the error is still not resolved, check if you can print
another photograph.
An unsupported USB hub is connected.

Remove the hub.
If a PictBridge compliant device is connected via a USB hub,

remove the hub and connect it directly to the machine.
B200
Printer error has occurred.
See the manual.
Turn off the machine, and unplug the power cord of the
machine from the power supply.
If the problem is not resolved, contact your Canon service
representative.
****
"****" is displayed in the alphanumeric character and

depends on the error occurred.
5100/5110 is displayed:
Cancel printing, and turn off the machine. Then clear the
paper jam or foreign object that is preventing the Print
Head Holder from moving.
Printer error has occurred.

Turn off power then back on again.
If problem persists, see the manual.
Caution
Be careful not to touch the components inside the

machine. The machine may not print out properly if
you touch it.
Turn the machine back on.
representative.
In other cases:
Plug the machine back in and turn the machine back on.
representative.
Scanner is not operating correctly.
After a while, plug the power cord of the machine back in,
and then turn on the machine. If the same error occurs,
contact your Canon service representative.
The card is currently writable from PC.

Set to [Not writable from PC].
The Card Slot is set to Writable from PC.

You cannot print from the memory card or save the scanned
data to the memory card when the Card Slot is set to
Writable from PC. After writing on the memory card, set to Not
writable from PC again.
Page top
Advanced Guide > Troubleshooting > LCD Cannot Be Seen At All

If the Power lamp is lit:
The machine is not powered on. Connect the power cord and press the ON button.
If the Power lamp is lit:

The LCD may be in the screen-saver mode. On the Operation Panel, press a button other than the
ON button.
Page top
Advanced Guide > Troubleshooting > An Unintended Language Is Displayed on the LCD

Select the language you want to be displayed according to the following procedure.
1. Press the HOME button and wait for about 5 seconds.
2. Select
, and then press the OK button.
3. Press the
button to select
4. Press the
button 4 times, then press the OK button.
, then press the OK button.
If the Bluetooth unit is connected to the machine, press the

OK button.
5. Use the
button 6 times, and then press the
button to select the language for the LCD, then press the OK button.
Page top
Advanced Guide > Troubleshooting > Cannot Install the MP Drivers

If the installation does not start even after the Setup CD-ROM is inserted
into your computer's disc drive:

Start the installation following the procedure below.
1. Click Start then Computer.

In Windows XP, click Start then My Computer.
In Windows 2000, double-click the
2. Double-click the
My Computer icon on the desktop.
CD-ROM icon on the displayed window.
If the contents of the CD-ROM are displayed, double-click MSETUP4.EXE.
Double-click the
CD-ROM icon on your desktop to start installation.
Note
If the CD-ROM icon is not displayed, try the following:

Remove the CD-ROM from your computer, then insert it again.
Restart your computer.
If the icon is still not displayed, try different discs and see if they are displayed. If other discs are
displayed, there is a problem with the Setup CD-ROM . In this case, contact your Canon service
representative.
If you are unable to proceed beyond the Printer Connection screen:
If you are unable to proceed beyond the Printer Connection screen, make sure that the USB cable is
securely plugged into the USB port of the machine and is connected to the computer, and then
follow the procedure below to reinstall the MP Drivers.

Note
In Windows Vista, "The printer is not detected. Check the connection." may be displayed
depending on the computer you use. In this case, wait for a while. If you still cannot proceed to
the next step, follow the procedure below to reinstall the MP Drivers.
1. Click Cancel on the Printer Connection screen.

2. Click Start Over on the Installation Failure screen.
3. Click Back on the screen that appears next.
4. Click Exit on the PIXMA XXX screen, then remove the CD-ROM.
5. Turn the machine off.
6. Restart the computer.
7. Make sure that you have no application software running.
8. Follow the procedure described in your setup manual to reinstall the MP Drivers.
In other cases:
Follow the procedure described in your setup manual to reinstall the MP Drivers.
If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and
then reinstall the MP Drivers.
Uninstalling the MP Drivers

If you reinstall the MP Drivers, select Custom Install on the Setup CD-ROM .
Note
If the installer was forced to be terminated due to a Windows error, the system may be in an
unstable condition and you may not be able to install the drivers. Restart your computer before
reinstalling.
Page top
Advanced Guide > Troubleshooting > Cannot Connect to Computer Properly

Printing or Scanning Speed Is Slow/Hi-Speed USB Connection Does Not Work/
"This device can perform faster" Message Is Displayed
If your system environment is not fully compatible with Hi-Speed USB, the machine will operate at
a lower speed provided under USB 1.1. In this case, the machine operates properly but printing
speed may slow down due to communication speed.
Check: Check the following to make sure that your system environment supports
Hi-Speed USB connection.
Does the USB port on your computer support Hi-Speed USB connection?
Do the USB cable, and the USB hub if you are using one, support Hi-Speed USB
connection?
Be sure to use a certified Hi-Speed USB cable. We recommend that the cable is no
longer than around 10 feet / 3 meters.
Does the operating system of your computer support Hi-Speed USB connection?
Obtain and install the latest update for your computer.
Does the Hi-Speed USB driver operate properly?
Obtain the latest version of the Hi-Speed USB driver compatible with your hardware
and reinstall it on your computer.
Important
For details on Hi-Speed USB of your system environment, contact the manufacturer of
your computer, USB cable, or USB hub.
Page top
Advanced Guide > Troubleshooting > Print Results Not Satisfactory

If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the
paper and print quality settings first.
Check 1: Do the page size and media type settings match the size and
type of the loaded paper?
When these settings are incorrect, you cannot obtain a proper print result.
If you are printing a photograph or an illustration, incorrect paper type settings may reduce the quality
of the printout color.
Also, if you print with an incorrect paper type setting, the printed surface may be scratched.
In borderless printing, uneven coloring may occur depending on the combination of the paper type
setting and the loaded paper.
The method to confirm the paper and print quality settings differs depending on what you do with
your machine.
To copy by operating the machine
Confirm by using the Operation Panel on the

machine.
Setting Items
To print from your memory card by operating the

machine.
Setting Items
machine
To print from printed photo by operating the
machine

machine.
Setting Items
To print from a PictBridge compliant device
Confirm by using your PictBridge compliant

device.
Printing Photographs Directly from a
Compliant Device
machine.
To print from a wireless communication device

machine.
To print from a computer
Confirm by using the printer driver.

Check2: Make sure that the appropriate print quality is selected

according to the media type and printing data referring to the table in
Check 1.
Select a print quality option suitable for the paper and image for printing. If you notice blurs or uneven
colors, increase the print quality setting and try printing again.
Note
When printing from a PictBridge compliant device, set the print quality setting by using the
Operation Panel on the machine.
You cannot make this setting from a PictBridge compliant device.
You cannot change the print quality setting when printing from a wireless communication
device.
Check 3: If the problem is not resolved, there may be other causes.

See also the sections below:
No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks

Page top
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Cannot Print to End of Job

Check 1: Is the size of the print data extremely large?
Click Print Options on the Page Setup sheet. Then, select the Prevent loss of print data check box in
the displayed dialog.
Check 2: Is the space of your computer's hard disk sufficient?

Delete unnecessary files to free disk space.
Page top
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > No Printing Results/Printing Is Blurred/Colors Are
Wrong/White Streaks
No Printing Results/Printing Is Blurred/Colors Are Wrong/White

Streaks
Check 1: Did you confirm the paper and print quality settings?
Check 2: Check the status of ink tanks. Replace the ink tank if the ink
has run out.

Routine Maintenance
Check 3: Is the orange tape or protective film remaining?

Make sure that all of the protective film is peeled off and the air hole is exposed, as illustrated in (A).
If the orange tape is left as in (B), pull the orange tape and remove it.
Check 4: Print the Nozzle Check Pattern and perform any necessary
maintenance operations such as Print Head Cleaning.
Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head
nozzles.
Refer to Routine Maintenance for the Nozzle Check Pattern printing, Print Head Cleaning, and Print
Head Deep Cleaning.
If the Nozzle Check Pattern is not printed correctly:
Check to see if a particular color's ink tank is not empty.
If the Nozzle Check Pattern is not printed correctly though ink is sufficient, perform the Print Head
Cleaning and try printing the Nozzle Check Pattern again.
If the problem is not resolved after performing the Print Head Cleaning twice:
Perform the Print Head Deep Cleaning.
If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the
machine and perform another Print Head Deep Cleaning after 24 hours.
If the problem is not resolved after performing the Print Head Deep Cleaning twice:
If Print Head Deep Cleaning does not resolve the problem, the Print Head may be damaged.
Check 5: When using paper with one printable surface, make sure that
the paper is loaded with the printable side facing up.
Printing on the wrong side of such paper may cause unclear prints or prints with reduced quality.
Refer to the instruction manual supplied with the paper for detailed information on the printable side.
When copying, see also the sections below:

Check6: Make sure that the original is properly loaded on the Platen
Glass.
Check7: Is the original loaded with the side to be copied facing down on
the Platen Glass?
Check8: Did you copy a printout done by this machine?

Print from the memory card or from the digital camera directly, or reprint from the computer.
If you copy a printout done by this machine, print quality may be reduced.
Page top
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Lines Are Misaligned
Check 2: Perform Print Head Alignment.

If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Routine Maintenance
Check 3: Is the size of the print data extremely large?

Click Print Options on the Page Setup sheet. Then, select the Prevent loss of print data check box in
the displayed dialog.
Check 4: Is the Printing layout printing performed or the Binding margin
function used?
When the Printing layout printing or Binding margin function is being used, thin lines may not be
printed. Try thickening the lines in the document.
Page top
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Printed Paper Curls or Has Ink Blots
Check 2: If the intensity is set high, reduce the Intensity setting in the
printer driver and try printing again.
If you are using plain paper to print images with high intensity, the paper may absorb too much ink
and become wavy, causing paper abrasion.
When printing from your computer
Confirm the intensity using the printer driver.
Adjusting Intensity
When copying
Setting Items
Check 3: Is Photo Paper used for printing photographs?

When printing data with high color saturation such as photographs or images in deep color, we
recommend using Photo Paper Plus Glossy II or other Canon speciality paper.
Page top
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Paper Is Smudged/Printed Surface Is Scratched
Check 2: Is the appropriate type of paper used? Check the following:

Check to see if the paper you are printing on is suitable for your printing purpose.
When performing Borderless Printing, make sure that the paper you are using is suitable for
Borderless Printing.
If the paper you are using is not suitable for Borderless Printing, the print quality may be
reduced at the top and bottom edges of the paper.
Printing Area
Check 3: Load the paper after correcting its curl.

For Plain Paper
Turn the paper over and reload it to print on the other side.
Leaving the paper loaded on the Rear Tray for a long time may cause the paper to curl. In this
case, load the paper with the other side facing up. It may resolve the problem.
We recommend putting unused paper back into the package and keeping it on a level surface.
For Other Paper

1. With the printing side (A) facing up, cover the paper with a fresh sheet of plain paper to
avoid staining or scratching the surface.
2. Roll up the paper in the opposite direction to the paper curl as seen below.
3. Check to see that the paper curl is within approximately 0.08 to 0.2 inches / 2 to 5 mm (B) in
height.
We recommend printing curl-corrected paper one sheet at a time.

Note
Depending on the media type, the paper may be smudged or may not be fed properly even if it
is not curled. In such cases, follow the procedure described above to curl the paper before
printing. This may improve the print result.
Check 4: If you are printing on thick paper, select the Prevent paper
abrasion setting.
Selecting the Prevent paper abrasion setting will widen the clearance between the Print Head and
the loaded paper. If you notice abrasion even with the media type set correctly to match the loaded
paper, set the machine to prevent paper abrasion by using the Operation Panel or the printer driver.
Print speed is reduced if you are selecting the Prevent paper abrasion setting.
* Deactivate the Prevent paper abrasion setting once printing is complete. If not, this setting remains
enabled for all subsequent print jobs.
To set by using the Operation Panel

From the HOME screen, select Settings, Device settings, and Print settings in this order, and
then set Prevent paper abrasion to ON.
To set by using the printer driver
Open the printer properties dialog box, and in Custom Settings in the Maintenance sheet, select
the Prevent paper abrasion check box, and then click Send.
To open the printer properties dialog box, see Opening the Printer Properties Dialog Box
(Windows) .
In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, select the Prevent
paper abrasion check box, and then click Send.
To open the Canon IJ Printer Utility, see Opening the Canon IJ Printer Utility (Macintosh) .
Check 5: If the intensity is set high, reduce the Intensity setting in the
printer driver and try printing again.
If you are using plain paper to print images with high intensity, the paper may absorb too much ink
and become wavy, causing paper abrasion.
When printing from your computer
Reduce the Intensity setting in the printer driver and try printing again.

Opening the Printer Properties Dialog Box (Windows)
Click Here: Printer Driver
* Before clicking here to open the printer properties dialog box, quit the running application
software.
2. On the Main sheet, select Manual for Color/Intensity, and then click Set.
3. Drag the Intensity slide bar on the Color Adjustment sheet to adjust the
intensity.
1. Open the Print dialog box.

Opening the Page Setup and Print Dialog Box (Macintosh)
2. Select Color Options in the pop-up menu.

3. Drag the Intensity slide bar to set the intensity.
When copying
Setting Items
Check 6: Is printing performed beyond the recommended printing area?

If you are printing beyond the recommended printing area of your printing paper, the lower edge of
the paper may become stained with ink.
Resize your original document in your application software.

Printing Area
Check 7: Is the Platen Glass dirty?

Clean the Platen Glass.
Check 8: Is the Paper Feed Roller dirty?

Clean the Paper Feed Roller.
Routine Maintenance
Note
Cleaning the Paper Feed Roller will wear the roller, so perform this procedure only when
necessary.
Check 9: Is inside of the machine dirty?

When performing duplex printing, the inside of the machine may become stained with ink, causing
the printout to become smudged.
Perform the Bottom Plate Cleaning to clean the inside of the machine.
Note
To prevent the inside of the machine from stains, set the paper size correctly.
Check 10: Set Ink Drying Wait Time longer.

Doing so gives the printed surface enough time to dry so that paper smudged and scratched are
prevented.

3. Click the Maintenance tab and then Custom Settings.

4. Drag the Ink Drying Wait Time slide bar to set the wait time, and then click Send.
5. Confirm the message and click OK.
2. Open the Canon IJ Printer Utility.

Opening the Canon IJ Printer Utility (Macintosh)
3. Select Custom Settings in the pop-up menu.

4. Drag the Ink Drying Wait Time slide bar to set the wait time, and then click Send.
5. Confirm the message and click OK.
Check 11: Is the paper scratched by other loaded paper?
Depending on the media type, the paper may be scratched by other loaded paper when feeding from
the Rear Tray. In this case, load one sheet at a time.
Page top
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Back of the Paper Is Smudged
Check 2: Perform the Bottom Plate Cleaning to clean the inside of the
machine.
Note
When performing duplex printing or too much printing, the inside may become stained with ink.
Page top
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Vertical Lines Are Printed on the Sides of the
Printout
Check 1: Did you confirm the paper type and print quality settings?
Check 2: Is the size of the loaded paper correct?

The margin may be smudged if the size of the loaded paper is larger than that specified in the
printer driver.
Set the paper size correctly according to the paper you loaded.

Note
This machine performs automatic cleaning when necessary to keep printouts clean. A small
amount of ink is ejected for cleaning.
Although ink is usually ejected on the ink absorber, it may be ejected on the paper if you load
paper larger than that specified with the printer driver.
Page top
Advanced Guide > Troubleshooting > Print Results Not Satisfactory > Colors Are Uneven or Streaked
Check 2: Print the Nozzle Check Pattern and perform any necessary
maintenance operations such as Print Head Cleaning.
nozzles.
Head Deep Cleaning.
Check 3: Perform Print Head Alignment.

Routine Maintenance
Page top
Advanced Guide > Troubleshooting > Printing Does Not Start

Check 1: Make sure that the power plug is securely plugged in, then
turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops
flashing and remains lit green.
Note
When printing large data such as a photo or graphics, it may take longer to start printing. While
the Power lamp is flashing green, the computer is processing data and sending it to the
machine. Wait until printing starts.
Check 2: Check the status of ink tanks. Replace the ink tank if ink has
run out.
Check 3: Open the Scanning Unit (Cover) and check to see if the ink
lamps are flashing red.
If there is still sufficient ink but its ink lamp is flashing red, an ink tank may not be installed in a right
position.
Routine Maintenance
Check 4: Open the Scanning Unit (Cover) and make sure that the ink
lamps light up red.
If the ink lamp is not lit, press the
mark on the ink tank until it clicks into place.
Check 5: Make sure that the USB cable is securely plugged in to the
machine and the computer, then check the following:
If you are using a relay device such as a USB hub, disconnect it, connect the machine directly to
the computer, and try printing again. If printing starts normally, there is a problem with the relay
device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try printing
again.
Check 6: Restart your computer if you are printing from the computer.
If there are any unnecessary print jobs, delete them.
Deleting the Undesired Print Job
Check 7: Make sure that your machine's name is selected in the Print
dialog box.
The machine will not print properly if you are using a driver for a different printer.
In Windows, make sure that your machine's name is selected in the Print dialog box.
On a Macintosh, make sure that your machine's name is selected in Printer in the Print dialog box.
Note
To make the machine the one selected by default, select Set as Default Printer (Windows),
Default Printer or Make Default (Macintosh).
Check 8: Configure the printer port appropriately.
Configure "USBnnn" (where "n" is a number) as the printer port.
1. Log on as a user account with administrator privilege.

2. Click Control Panel, then Printer under Hardware and Sound.
In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and Faxes.
In Windows 2000, click Control Panel then Printers.
3. Right-click the Canon XXX Printer icon, then select Properties.

4. Click the Ports tab to confirm the port settings.
Make sure that a port named USBnnn (where "n" is a number) with Canon XXX Printer
appearing in the Printer column is selected for Print to the following port(s).
If the setting is incorrect, reinstall the MP Drivers or change the printer port to the correct one.
Page top
Advanced Guide > Troubleshooting > Copying/Printing Stops Before It Is Completed

Check 1: Has the machine been printing continuously for a long
period?
If the machine has been printing continuously for a long time, the Print Head may overheat. To
protect the Print Head, the machine may stop printing at a line break for a period of time and then
resume printing.
In this case, interrupt your print session at a convenient time and turn the machine off for at least 15
minutes.
Additionally, if the machine has been printing graphics or photos with intense colors continuously
over a period of time, the machine may stop printing to protect the Print Head. In this case, printing
will not resume automatically. Turn the machine off for at least 15 minutes.
Caution
The Print Head and the surrounding area can become extremely hot inside the machine. Never
touch the Print Head or nearby components.
Check 2: Is the paper loaded?

Make sure that paper is loaded in the Rear Tray or Cassette.
Confirm the paper source, then reload paper.
Check 3: Do the printing documents have lots of photographs or

illustrations?
Printing large data such as photos or graphics takes time for the machine and the computer to
process, during which the machine may appear to have stopped operating.
In addition, when printing data that uses a large amount of ink continuously on plain paper, the
machine may pause temporarily. In either case, wait until the process is complete.
Note
If you are printing a document with a large printing area or printing multiple copies of a
document, printing may pause to allow the ink to dry.
Page top
Advanced Guide > Troubleshooting > Machine Moves But Ink Is Not Ejected

Check 1: Are the Print Head nozzles clogged?
nozzles.
Head Deep Cleaning.
Check 2: Has the ink run out?

See An Error Message Is Displayed on the LCD to identify the ink error, and then take the
appropriate action depending on the error condition.
Check 3: Is the orange tape or protective film remaining?

Make sure that all of the protective film is peeled off and the air hole is exposed, as illustrated in (A).
If the orange tape is left as in (B), pull the orange tape and remove it.
Page top
Advanced Guide > Troubleshooting > Printing Speed Not as Fast as Expected

Check 1: Is printing performed in Quiet Mode?
Print speed is reduced if you specified to print in Quiet Mode in the printer driver or Operation Panel.
For faster printing, do not print in Quiet Mode.
For information on the printer driver settings, refer to Reducing the Machine Noise .
For information to make setting on the Operation Panel, see Changing the Machine Settings on the
LCD.
Check 2: Is the print quality set too high?

Increase the printing speed setting in the printer driver. Setting to prioritize speed makes printing
faster.

Click Here: Printer Driver
* Before clicking here to open the printer properties dialog box, quit the running application
software.
2. On the Main sheet, select Fast for the Print Quality setting.
Depending on the media type, the Fast option may not be available.
1. Open the Print dialog box.

2. Select Quality & Media in the pop-up menu and then select Fast for the Print
Quality setting.
Depending on the media type, the Fast option may not be available.
Note
Printing speed may not improve noticeably by following the instructions above, depending on your
system environment.
Page top
Advanced Guide > Troubleshooting > Print Head Holder Does Not Move to the Position for Replacing
Check 1: Is the Power lamp off?
Check if the Power lamp is lit green.
The Print Head Holder will not move unless the power is on. If the Power lamp is off, close the
Scanning Unit (Cover) and turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp stops
flashing and remains lit green, and then open the Scanning Unit (Cover) again.
Check 2: Is an error message displayed on the LCD?

Close the Scanning Unit (Cover), confirm the number of times the Alarm lamp is flashing, take the
appropriate action to resolve the error, and then reopen it. For details on how to resolve the error,
see An Error Message Is Displayed on the LCD .
Check 3: Has the Scanning Unit (Cover) been left open for 10 minutes or
longer?
If the Scanning Unit (Cover) is left open for more than 10 minutes, the Print Head Holder moves to
the right to prevent the Print Head from drying out. Close and reopen the Scanning Unit (Cover) to
return the Print Head Holder to the center.
Check 4: Has the machine been printing continuously for a long

period?
Close the Scanning Unit (Cover), wait a while, then reopen it.
If the machine has been printing continuously for a long time, the Print Head Holder may not move to
the center since the Print Head may overheat.
Note
Opening the Scanning Unit (Cover) while printing moves the Print Head Holder to the right. Close
the Scanning Unit (Cover), and reopen it after printing finishes.
Page top
Advanced Guide > Troubleshooting > Paper Does Not Feed Properly

Check 1: Make sure of the following when you load paper.
When loading two or more sheets of paper, align the edges of the sheets before loading.
When loading two or more sheets of paper, make sure that the paper stack does not exceed the
paper support load limit.
However, proper feeding of paper may not be possible at this maximum capacity depending on
the type of paper or environmental conditions (either very high or low temperature and humidity).
In such cases, reduce the sheets of paper you load at a time to less than half of the paper
support load limit.
Always load the paper in portrait orientation, either in the Rear Tray or the Cassette, regardless
of the printing orientation.
When you load the paper on the Rear Tray, load the paper with the print side facing UP and
slide the Paper Guides to align with the both sides of the paper.
When loading paper in the Cassette, load the paper with the print side facing DOWN. Align the
right edge of the paper stack against the right edge of the Cassette and slide the Paper Guides
against the left and bottom edges of the stack.
Check 2: Check to see if the paper you are printing on is not too thick or
curled.
Check 3: Make sure of the following when you load envelopes.

When printing on envelopes, refer to Loading Paper / Originals , and prepare the envelopes before
printing.
Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed
in landscape orientation, they will not feed properly.
Check 4: Confirm the paper source setting.

* If the paper source setting is not changed since you purchased this machine, the paper source for
plain paper is the Cassette.
Setting with the Operation Panel on the machine:

Setting with the printer driver:
For information on the paper source for plain paper when the Paper Source on the printer driver
is set to Automatically Select:
Check 5: Remove the foreign object in the Rear Tray or Cassette.
Check 6: Clean the Paper Feed Roller.

Routine Maintenance
Note
Cleaning the Paper Feed Roller will wear the roller, so perform this procedure only when
necessary.
Check 7: If two or more sheets of paper feed from the Cassette at once,
clean the inside of the Cassette.
For information on cleaning the inside of the Cassette, refer to Routine Maintenance .
Check 8: Is the Rear Cover closed completely?
Paper may be jammed if the Rear Cover is not closed completely. Push the Rear Cover until it is
closed completely.
Refer to Overview of the Machine for the position of the Rear Cover.
Page top
Paper Does Not Feed from the Paper Source Specified in the Printer Driver
Advanced Guide > Troubleshooting > Paper Does Not Feed from the Paper Source Specified in the Printer Driver
Paper Does Not Feed from the Paper Source Specified in the
Printer Driver
Check: Is the paper source setting inconsistent between the application

program and the printer driver?
Change the application software setting corresponding to the printer driver setting, or click the Print
Options on the Page Setup sheet in the printer driver and select Disable the paper source setting of
the application software on the Print Options screen.
When the paper source setting is inconsistent between an application program and the printer
driver, the application software setting takes precedence.
Page top
Paper Jams
Advanced Guide > Troubleshooting > Paper Jams
Paper Jams
Note
If you need to turn off the machine to remove jammed paper during printing, press the Stop button
to cancel print jobs before turning off the machine.
If the paper is jammed in the Paper Output Slot or the Rear Tray:
Remove the paper following the procedure below.
1.
Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot,
whichever is easier.
Note
If the paper tears and a piece remains inside the machine, turn the machine off, open
the Scanning Unit (Cover), and remove the paper.
Be careful not to touch the components inside the machine.
After removing all paper, close the Scanning Unit (Cover), and turn the machine back on.
If you cannot pull the paper out, turn the machine off and turn it back on. The paper may
be ejected automatically.
2.
Reload the paper, and press the OK button on the machine.
If you turned off the machine in step 1, all print jobs in the queue are canceled. Reprint if
necessary.
Note
When reloading the paper, confirm that you are using the correct paper and are loading it
correctly.
A5-sized paper is suited to printing documents consisting mainly of text. We do not
recommend using such paper to print documents with photos or graphics, since the
printout may curl and cause paper exit jams.
If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error
continues after removing the paper, contact your Canon service representative.
If paper is jammed inside the machine at the transport unit:

Remove the paper following the procedure below.
1. Detach the Rear Cover.
Paper Jams
2. Pull the paper out slowly.
Note
Be careful not to touch the components inside the machine.

If you cannot pull the paper out, turn the machine off and turn it back on. The paper may
be ejected automatically.
3. Attach the Rear Cover.

Push the left side of the Rear Cover until it is closed completely.
If you were not able to remove the paper out in step 2:
4. Remove the Cassette.

5. Pull the paper out slowly.
6. If any paper is sticking out of the Cassette, remove the paper, align and reload
the paper in the Cassette.
Note
When reloading the paper into the machine, confirm that you are using the correct paper
and are loading it into the machine correctly.
Paper Jams

7. Insert the Cassette into the machine again, and press the OK button on the
machine.
If you turned off the machine in step 2, all print jobs in queue are canceled. Reprint if
necessary.
If you cannot remove the paper or if the paper tears inside the machine, or if the paper jam error
continues after removing the paper, contact your Canon service representative.
In other cases:
Make sure of the following:
Check 1: Are there any foreign objects in the Rear Tray or around the Paper
Output Slot?
Check 2: Is the Rear Cover closed completely?
Check 3: Is the paper curled?

Check 3: Load the paper after correcting its curl.
Page top
Advanced Guide > Troubleshooting > Message Appears on the Computer Screen



Check: Is the movement of the Print Head Holder blocked?

Cancel printing from your computer and turn off the machine. Then clear the jammed paper or
protective material that is preventing the Print Head Holder from moving.
Important
Be careful not to touch the components inside the machine. The machine may not print
out properly if you touch it.
Turn the machine back on.
Check 1: If the Power lamp is off, make sure that the power plug is plugged in,
then turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp
stops flashing and remains lit green.
Check 2: Make sure that the printer port is configured appropriately in the MP
Drivers.
* In the following instructions, " XXX" signifies your machine's name.
1.
Log on as a user account with administrator privilege.
2.
Click Control Panel, then Printer under Hardware and Sound.
In Windows XP, click Control Panel, Printers and Other Hardware, then Printers and
Faxes.
In Windows 2000, click Control Panel then Printers.
3.
Right-click the Canon XXX Printer icon, then select Properties.
4.
Click the Ports tab to confirm the port settings.
Make sure that a port named USBnnn (where "n" is a number) with Canon XXX Printer
appearing in the Printer column is selected for Print to the following port(s).
If the port setting is not correct, reinstall the MP Drivers or change the port setting
according to the interface you are using.
Check 3: Make sure that the USB cable is securely plugged in to the machine
and the computer.
If you are using a relay device such as a USB hub, disconnect it, connect the machine
directly to the computer, and try printing again. If printing starts normally, there is a
problem with the relay device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try
printing again.
Check 4: Make sure that the MP Drivers are installed correctly.

Uninstall the MP Drivers following the procedure described in Uninstalling the MP Drivers and
reinstall them following the procedure described in your setup manual.
Check 5: Check the status of the device on your computer.

Follow the procedure below to check the status of the device.
1.
Click Control Panel, Hardware and Sound, then Device Manager.
If the User Account Control screen is displayed, follow the on-screen instructions.
In Windows XP, click Control Panel, Performance and Maintenance, System, then click
Device Manager on the Hardware sheet.
In Windows 2000, click Control Panel, System, then Device Manager on the Hardware
sheet.
2.
Double-click Universal Serial Bus controllers then USB Printing Support.
If USB Printing Support is not displayed, make sure that the machine is correctly
connected to the computer.
Check 3: Make sure that the USB cable is securely plugged in to the machine and the
computer.
3.
Click the General tab and make sure that there is no indication of a problem with the
device.
If a device error is displayed, refer to Windows help to resolve the error.
Check 1: If the Power lamp is off, make sure that the power plug is plugged in,
then turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the Power lamp
stops flashing and remains lit green.
Check 2: Make sure that the USB cable is securely plugged in to the machine
and the computer.
If you are using a relay device such as a USB hub, disconnect it, connect the machine
directly to the computer, and try printing again. If printing starts normally, there is a
problem with the relay device. Consult the reseller of the relay device for details.
There could also be a problem with the USB cable. Replace the USB cable and try
printing again.
Check 3: Make sure that your machine's name is selected in the Print dialog
box.
Check: See Contact the support center or service center for ink absorber
replacement. in An Error Message Is Displayed on the LCD and take the
appropriate action.
Check: See The following ink may have run out. in An Error Message Is
Displayed on the LCD and take the appropriate action.
Check: See The remaining level of the following ink cannot be correctly
detected. in An Error Message Is Displayed on the LCD and take the appropriate
action.
Check: See The following ink has run out. in An Error Message Is Displayed on
the LCD and take the appropriate action.
Check: See The device may be incompatible. in An Error Message Is Displayed

on the LCD and take the appropriate action.
Check: See An unsupported USB hub is connected. in An Error Message Is

Displayed on the LCD and take the appropriate action.
Check: If an error message is displayed outside the printer status monitor, check
the following:
"Could not spool successfully due to insufficient disk space"
Delete any unnecessary files to increase the amount of free space on the disk.
"Could not spool successfully due to insufficient memory"
Quit other running applications to increase available memory.
If you still cannot print, restart your computer and retry printing.
"Printer driver could not be found"
Uninstall the printer driver according to the procedure described in Uninstalling the MP
Drivers, and then reinstall it.
"Could not print Application name - File name"
Try printing again once the current job is complete.
Page top
For Windows Users
Advanced Guide > Troubleshooting > For Windows Users
For Windows Users

Printer Status Monitor Is Not Displayed
Check: Is the printer status monitor enabled?

Make sure that Enable Status Monitor is selected on the Option menu of the printer status
monitor.
1.
Open the printer properties dialog box.
2.
On the Maintenance sheet, click View Printer Status.
3.
Select Enable Status Monitor on the Option menu if it is not selected.
The Inkjet Printer/Scanner Extended Survey Program Screen Is Displayed

If the Inkjet Printer/Scanner Extended Survey Program is installed, the confirmation screen asking
to send the printer usage information will be displayed three months and then six months after the
installation. After that, it will be displayed every half a year for about four years.
Read the instructions on the screen and follow the procedure below.
If you agree to participate in the survey program:

Click Agree, then follow the on-screen instructions. The printer usage information will be sent
to Canon via the Internet.
Note
When sending the information, the caution screen such as an Internet security screen
may be displayed.
In this case, confirm the program name is "IJPLMUI.exe", then allow it.
If you do not agree to participate in the survey program:

Click Do not agree. The confirmation screen will be closed, and the survey at that time is
skipped. The confirmation screen will be displayed again three months later.
To uninstall the Inkjet Printer/Scanner Extended Survey Program:
For Windows Users
To uninstall the Inkjet Printer/Scanner Extended Survey Program, click Details, then click
Uninstall on the detail description screen. Once the program has been uninstalled, neither
the survey nor the transmission of the printer usage information will be performed.
Page top
Advanced Guide > Troubleshooting > Error Message Appears on a PictBridge Compliant Device

The following are the possible errors that may occur when printing directly from a PictBridge compliant
device and the countermeasures to clear them.
Note
This section describes errors that are indicated on Canon-brand PictBridge compliant devices. The
error messages and operations may vary depending on the device you are using. For errors on non
-Canon PictBridge compliant devices, check the error message on the LCD and take the
appropriate action to clear the error. For details, see An Error Message Is Displayed on the LCD .
For the errors indicated on the PictBridge compliant device and their solution, also refer to the
instruction manual of the device. For other troubles on the device, contact the manufacturer.
Error Message On PictBridge
Compliant Device
Action
"Printer in use"
If the machine is printing from the computer or warming up,

wait until the job ends.
When it is ready, the machine starts printing automatically.
"No paper"
Load paper on the Rear Tray, and select Continue* in the

display on your PictBridge compliant device.
* To resume printing, you can also press the OK button on
the machine instead of selecting Continue on the device.
"Paper jam"
Select Stop in the display on your PictBridge compliant

device to stop printing.
Remove the jammed paper, load new paper, press the OK
button on the machine, and try printing again.
"Printer cover open"
Close the Scanning Unit (Cover) on the machine.
"No print head"
The Print Head is defective or is not installed.

Check: See Print head is not installed. in An Error Message
Is Displayed on the LCD and take the appropriate action.
"Waste tank full"/"Ink absorber full"
The ink absorber is nearly full.

Check: See Contact the support center or service center for
ink absorber replacement. in An Error Message Is Displayed
on the LCD and take the appropriate action.
"No ink"/
"Ink cassette error"
The ink tank is not installed properly or empty.

Check the error message on the LCD and take the
appropriate action to resolve the error.
"Ink Error"
An ink tank that was once empty is installed.

Check: See The remaining level of the following ink cannot
be correctly detected. in An Error Message Is Displayed on
the LCD and take the appropriate action.
"Hardware Error"
Ink tank errors have occurred.

Routine Maintenance
"Printer error"
An error requiring servicing may have occurred. (The Power

lamp flashes green and Alarm lamp flashes orange
alternately.)
Disconnect the USB cable between the machine and the
PictBridge compliant device, turn off the machine, and
unplug the power cord of the machine from the power
supply.
Plug the power cord of the machine back in, turn on the
machine, and then reconnect the PictBridge compliant
device to the machine.
If the same error occurs, contact your Canon service
representative.
Page top
Advanced Guide > Troubleshooting > Cannot Print Properly from a Wireless Communication Device

Check: Is printing possible through Bluetooth communication?
Troubleshooting
Page top
Advanced Guide > Troubleshooting > Cannot Print Properly from a Photo Index Sheet

Check the following if Failed to scan Photo Index Sheet. is displayed on
the LCD, press the OK button, and perform the Scan sheet and print
menu again.
Did you set Photo Index Sheet in the correct position and orientation on the Platen Glass?
Are the Platen Glass and the Photo Index Sheet dirty?
Are all required circles on the Photo Index Sheet filled in?
Note
If the filled circles on the Photo Index Sheet are not dark or vast enough, the machine may not
scan the Photo Index Sheet properly.
Page top
Advanced Guide > Troubleshooting > Cannot Remove a Memory Card

Important
Never attempt to remove a memory card using a thin stick or tweezers. Doing so may damage the
machine.
Note
Exclusive adapters are required for the following memory cards. Insert these cards in the machine
with adapters attached.
miniSD Card/miniSDHC Card/microSD Card/microSDHC Card/xD-Picture Card/xD-Picture Card
Type M/xD-Picture Card Type H/Memory Stick Micro/RS-MMC (ver.4.1)
Page top
Advanced Guide > Troubleshooting > Problems with Scanning

Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear
Slow Scanning Speed
Page top
Advanced Guide > Troubleshooting > Problems with Scanning > Scanner Does Not Work

Check: Restart the computer.
Page top
Advanced Guide > Troubleshooting > Problems with Scanning > ScanGear (Scanner Driver) Does Not Start

Check 1: Make sure that the MP Drivers are installed.
Insert the Setup CD-ROM into the computer's disc drive, then select Custom Install and install MP
Drivers.
Check 2: On the File menu of the application, select Select Source and
select the machine.
Important
Do not select the model name that includes WIA in it.

Note
The operation may differ depending on the application.
Check 3: Start from a TWAIN-compliant application.

Page top
Error Message Appears and the ScanGear (Scanner Driver) Screen Does N... Page 704 of 758 pages
Advanced Guide > Troubleshooting > Problems with Scanning > Error Message Appears and the ScanGear (Scanner
Driver) Screen Does Not Appear
Error Message Appears and the ScanGear (Scanner Driver)

Screen Does Not Appear
Check 1: Make sure that the machine is turned on.
Check 2: Connect the USB cable to a different USB port on the computer.
Check 3: If the USB cable is connected to a hub, remove it from the hub
and connect it to a USB port on the computer.
Check 4: Make sure that the MP Drivers are installed.
If it is not installed, insert the Setup CD-ROM into the computer's disc drive, then select Custom Install
and install MP Drivers.
Check 5: On the File menu of the application, select Select Source and
select the machine.
Note
The operation may differ depending on the application.
Check 6: Make sure that the application is TWAIN-compliant.

You cannot open ScanGear (scanner driver) from applications not supporting TWAIN.
Check 7: Exit ScanGear (scanner driver) if it is running on another

application.
Page top
Advanced Guide > Troubleshooting > Problems with Scanning > Scan Quality (Image Displayed on the Monitor) Is Poor

Check 1: Increase the scanning resolution.
Resolution
Check 2: Set the scale to 100%.

Some applications do not display images clearly if the image is too small.
Check 3: If moire (stripe pattern) appears, take the following measures and
scan again.
On the Basic Mode tab of ScanGear (scanner driver), select Magazine(Color) in Select Source.
On the Advanced Mode tab of ScanGear (scanner driver), set Descreen in Image Settings to ON.
Image Settings
Important
If moire appears when you scan a digital print photo, take the above measures and scan again.
If you use MP Navigator EX, set Document Type to Magazine(Color) or enable Descreen in the Scan
Settings dialog box and scan again.
Check 4: Check the monitor's color depth.

From the Start menu, select Control Panel > Appearance and Personalization > Adjust screen resolution
to open the Display Settings dialog box. Set the color depth to Medium (16 bit) or Highest (32 bit).
Windows XP:
From the Start menu, select Control Panel > Display to open the Display Properties dialog box. On
the Settings tab, set the color depth to Medium (16 bit) or Highest (32 bit).
Windows 2000:
From the Start menu, select Settings > Control Panel > Display to open the Display Properties dialog
box. On the Settings tab, set Colors to High Color (16 bit) or True Color (32 bit).
Check 5: The Platen or Document Cover may be dirty.

Clean the parts by following the procedures in " Cleaning the Exterior of the Machine ."
Check 6: If the document is in poor condition (dirty, faded, etc.), use

Reduce Dust and Scratches, Fading Correction, Grain Correction, etc. in
Image Settings on the Advanced Mode tab of ScanGear (scanner driver).
Image Settings
Check 7: If the color tone of images with consistent color tone (such as the
sky) is different from the original document, take the following measures
and scan again.
On the Advanced Mode tab of ScanGear (scanner driver), set Auto Tone in Image Settings to OFF.
Image Settings
Open the Preferences dialog box from the Advanced Mode tab of ScanGear (scanner driver) and set
Color Matching on the Color Settings tab.
Color Settings Tab

Page top
Advanced Guide > Troubleshooting > Problems with Scanning > Scanned Image Is Surrounded by Extra White Areas

Check: Specify the scan area.
(Auto Crop) in ScanGear (scanner driver) to automatically set the scan area for your document.
Click
You can also manually specify the scan area, for example when there are white margins along the
document.

Page top
Advanced Guide > Troubleshooting > Problems with Scanning > Cannot Scan Properly with Multi Crop

Check 1: Make sure that the documents are placed correctly on the Platen.
Placing Documents
Check 2: Scan each item individually without using Multi Crop.

Some applications do not support multiple image scanning.
Page top
Advanced Guide > Troubleshooting > Problems with Scanning > Cannot Scan Properly in Auto Scan Mode

Placing Documents
Check 2: Multiple image scanning may not be supported.

Some applications do not support multiple image scanning. In that case, scan each item individually.
Page top
Slow Scanning Speed
Advanced Guide > Troubleshooting > Problems with Scanning > Slow Scanning Speed
Slow Scanning Speed

Check 1: To view the image on a monitor, set the output resolution to
around 150 dpi. To print, set it to around 300 dpi.
Resolution
Check 2: Disable Fading Correction, Grain Correction, etc.

Image Settings
Check 3: In MP Navigator EX, deselect the Correct slanted document

checkbox and scan again.
Check 4: In MP Navigator EX, deselect the Detect the orientation of text

documents and rotate images checkbox and scan again.
Page top
Advanced Guide > Troubleshooting > Problems with Scanning > "There is not enough memory." Message Is Displayed

Check 1: Exit other applications and try again.
Check 2: Reduce the resolution or output size and scan again.

Resolution
Page top
Advanced Guide > Troubleshooting > Problems with Scanning > Computer Stops Operating during Scanning

Check 1: Restart the computer, reduce the output resolution in ScanGear
(scanner driver) and scan again.
Check 2: Delete unnecessary files to obtain sufficient free hard disk space,
then scan again.
Error message may appear when scanning a large document at high resolution.
Check 3: For Location of Temporary Files in MP Navigator EX, specify a

folder on a drive with sufficient free space.
See "General Tab " for details.
Check 4: Multiple devices may be connected to USB ports.

Disconnect other devices.
Page top
Advanced Guide > Troubleshooting > Problems with Scanning > Scanner Does Not Work After Upgrading Windows

Check: Disconnect the machine from the computer, then uninstall and
reinstall the MP Drivers and MP Navigator EX.
Step 1: Uninstall the MP Drivers.
See "Uninstalling the MP Drivers " for details.

Step 2: Uninstall MP Navigator EX.
1.
From the Start menu, select (All) Programs > Canon Utilities > MP Navigator EX 2.0 > MP
Navigator EX Uninstall.
2.
When a confirmation appears, click Yes.
3.
When uninstallation is complete, click OK.

MP Navigator EX is uninstalled.
Step 3: Reinstall the MP Drivers and MP Navigator EX.
Insert the Setup CD-ROM into the computer's disc drive, then select Custom Install and reinstall the
MP Drivers and MP Navigator EX.
Page top
Software Problems
Advanced Guide > Troubleshooting > Software Problems
Software Problems
E-mail Software Program You Want to Use Does Not Appear in the Screen for Selecting an E-mail
Software Program
Scanned Image Is Enlarged (Reduced) on the Computer Monitor
Page top
E-mail Software Program You Want to Use Does Not Appear in the Screen f... Page 714 of 758 pages
Advanced Guide > Troubleshooting > Software Problems > E-mail Software Program You Want to Use Does Not Appear
in the Screen for Selecting an E-mail Software Program
E-mail Software Program You Want to Use Does Not Appear in

the Screen for Selecting an E-mail Software Program
Check 1: MP Navigator EX may not support the e-mail software program.
The following e-mail software programs are supported. (Image are attached to the mail message
automatically.)

- Microsoft Outlook
- EUDORA
- Netscape Mail
Check 2: If an e-mail software program does not operate properly, check

that the program's MAPI is enabled.
To enable MAPI, refer to the manual of the e-mail software program.
Check 3: If using an e-mail software program other than the ones listed
above, select None (Attach Manually) when prompted to select a program
and attach the scanned image manually.
Page top
Advanced Guide > Troubleshooting > Software Problems > Scanned Image Is Printed Enlarged (Reduced)

Check: Set the printing size in the application.
Page top
Scanned Image Is Enlarged (Reduced) on the Computer Monitor
Advanced Guide > Troubleshooting > Software Problems > Scanned Image Is Enlarged (Reduced) on the Computer
Monitor
Scanned Image Is Enlarged (Reduced) on the Computer

Monitor
Check 1: Change the display setting in the application.
You cannot reduce the display size in Paint. To reduce the display size, open the images in an
application that accompanies the machine.
For details, refer to the application's manual. If you have any questions, contact the manufacturer of the
application.
Check 2: Change the resolution setting in ScanGear (scanner driver) and

scan again.
The higher the resolution, the larger the resulting image will be.
Resolution
Page top
Advanced Guide > Troubleshooting > Software Problems > Scanned Image Does Not Open

Check: If the file format is not supported by the application, scan the image
again and save it in a popular file format such as JPEG.
For details, refer to the application's manual. If you have any questions, contact the manufacturer of the
application.
Page top
Advanced Guide > Troubleshooting > MP Navigator EX Problems
Position or Size of the Image Cannot be Detected Correctly When Scanning Using the Operation Panel
Document Is Placed Correctly, but the Scanned Image Is Slanted
Document Is Placed Correctly, but the Orientation Changes in the Scanned Image
Page top
Advanced Guide > Troubleshooting > MP Navigator EX Problems > Cannot Scan at the Correct Size

Placing Documents
Check 2: Set Document Size to the actual document size and scan again.
If the matching size is not found, scan at a larger size and trim the image.
See the Toolbar (Trimming) in " Correct/Enhance Images Window " for details.
Page top
Position or Size of the Image Cannot be Detected Correctly When Scanning... Page 720 of 758 pages
Advanced Guide > Troubleshooting > MP Navigator EX Problems > Position or Size of the Image Cannot be Detected
Correctly When Scanning Using the Operation Panel
Position or Size of the Image Cannot be Detected Correctly

When Scanning Using the Operation Panel
Placing Documents
Check 2: Check that the MP Navigator EX settings are correctly set

according to the document.
Page top
Document Is Placed Correctly, but the Scanned Image Is Slanted
Advanced Guide > Troubleshooting > MP Navigator EX Problems > Document Is Placed Correctly, but the Scanned Image
Is Slanted
Document Is Placed Correctly, but the Scanned Image Is

Slanted
Check: In MP Navigator EX, deselect the Correct slanted document
checkbox and scan again.
Page top
Document Is Placed Correctly, but the Orientation Changes in the Scanned ... Page 722 of 758 pages
Advanced Guide > Troubleshooting > MP Navigator EX Problems > Document Is Placed Correctly, but the Orientation
Changes in the Scanned Image
Document Is Placed Correctly, but the Orientation Changes in

the Scanned Image
Check: In MP Navigator EX, deselect the Detect the orientation of text
documents and rotate images checkbox and scan again.
Page top
FAQs
Advanced Guide > Troubleshooting > FAQs
FAQs

Paper Jams
Page top
Advanced Guide > Troubleshooting > If You Cannot Resolve the Problem

If you cannot resolve the problem with any of the workarounds in this chapter, please contact the seller of
the machine or a Canon service representative.
Canon support staff are trained to be able to provide technical support to satisfy customers.
Caution
If the machine emits any unusual sound, smoke, or odor, turn it off immediately. Unplug the power
cord from the outlet and contact the seller or your Canon service representative. Never attempt to
repair or disassemble the machine yourself.
Attempts by customers to repair or take apart the machine will invalidate any warranty regardless of
whether the warranty has expired.
Before contacting your Canon service representative, confirm the following:
Product name:
* Your machine's name is located on the front cover of the setup manual.
Serial number: please refer to the setup manual
Details of the problem
What you tried to solve the problem, and what happened
Page top
Advanced Guide > Troubleshooting > Instructions for Use (Printer Driver)

This printer driver is subject to the following restrictions. Keep the following points in mind when using
the printer driver.
Restrictions on the Printer Driver

Depending on the document type to be printed, the paper feed method specified in the printer driver
may not operate correctly.
If this happens, open the printer driver setup screen from the Print dialog box of the application
software, and check the setting in the Paper Source field on the Main tab.
With some applications, the Copies setting in the Page Setup tab of the printer driver may not be
enabled.
In this case, use the copies setting in the Print dialog box of the application software.
If the selected Language in the About dialog box does not match the operating system interface
language, the driver screen may not be displayed properly.
Do not change the Advanced tab items of the printer properties. If you change any of the items, you
will not be able to use the following functions correctly.
Also, if Print to file is selected in the Print dialog box of the application software and with applications
that prohibit EMF spooling, such as Adobe Photoshop LE and MS Photo Editor, the following
functions will not operate.
Preview before printing on the Main tab
Prevent loss of print data in the Print Options dialog box
Page Layout Printing, Poster Printing, Booklet Printing, Duplex Printing, Specify Margin..., Print from
Last Page, Collate, and Stamp/Background... on the Page Setup tab
Since the resolution in the preview display differs from the printing resolution, text and lines in the
preview display may appear different from the actual print result.
With some applications, the printing is divided into multiple print jobs.
To cancel printing, delete all divided print jobs.
If image data is not printed correctly, display the Print Options dialog box from the Page Setup tab
and change the setting of Disable ICM required from the application software. This may solve the
problem.
If you use the Bluetooth option and perform one of the actions listed below, the print job may not end
and "Printing" may remain displayed on the status monitor even after printing ends and the printout
is ejected. If this happens, either click the Cancel Printing button on the Status Monitor or cancel that
print job from the print job queue of the printer.
If you move the machine during printing to a location where radio waves cannot reach or if the
radio wave status becomes poor
If you turn off the machine
If you are using a Bluetooth printer and you cancel printing after a printer error occurs, you may not
be able to execute subsequent printing operations. If this happens, turn off the machine and turn it
back on again.
If you are using Bluetooth, you cannot use the operation panel on the machine while the status
monitor is displayed from View Printer Status... on the Maintenance tab.
Software windows may not appear correctly on Windows Vista when fonts are set to Larger scale. If
you want to display the windows with Larger scale fonts, set the desktop theme to Windows Classic
as follows:
1. Select Control Panel from the Start menu.
2. Select Appearance and Personalization -> Personalization -> Theme.
The Theme Settings dialog box opens.
3. At the Theme Settings dialog box, click the Themes tab, and select Windows Classic from
Theme.
4. Click OK.
Desktop changes to Windows Classic display.
The card slot (memory card) of the machine may become inaccessible. In such cases, restart the
machine or turn it off and reconnect the USB cable.
Points to Note with Applications

There are following restrictions in Microsoft Word (Microsoft Corporation).
If Microsoft Word has the same printing functions as the printer driver, use Word to specify them.
When selecting Scaled Printing, Fit-to-Page Printing, or Page Layout Printing from the Page Layout
list on the Page Setup tab, the selected printing function may not be effective, depending on the
version of Word.
If this happens, follow the procedure below.
1. Open Word's Print dialog box.
2. Open the printer driver setup window, specify Page Layout on the Page Setup tab, and click
OK.
3.
4.
5.
6.
Without starting printing, close the Print dialog box.

Open Word's Print dialog box again.
Open the printer driver setup window again and click OK.
Start printing.
Illustrator/Adobe Systems Inc.

If Bitmap Printing takes effect, printing may take time or some data may not be printed. Print after
clearing the Bitmap Printing check box in the Print dialog box.
Page top
Advanced Guide > Troubleshooting > General Notes (Scanner Driver)

ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using
it.
Scanner Driver Restrictions

When using the NTFS file system, the TWAIN data source may not be invoked. This is because the
TWAIN module cannot be written to the winnt directory for security reasons. Contact the computer's
administrator for help.
Some computers (including laptops) connected to the machine may not resume correctly from
standby mode. In that case, restart the computer.
Do not connect two or more machines or multifunction printers with scanner function to the same
computer simultaneously. If multiple scanning devices are connected, you cannot scan from the
Operation Panel of the machine and also may experience errors while accessing the devices.
Software screens may not appear correctly on Windows Vista when font size is set to Larger scale. If
you want to display the screens with Larger scale fonts, change the theme in Appearance and
Personalization to Windows Classic as follows:
2. Select Appearance and Personalization > Personalization > Theme.
The Theme Settings dialog box opens.
3. On the Theme tab of the Theme Settings dialog box, select Windows Classic under Theme.
4. Click OK.
Desktop changes to Windows Classic view.
Use the default display font size of the OS. Otherwise, software screens may not appear correctly.
Scanning may fail if the computer has resumed from sleep or standby mode. In that case, follow
these steps and scan again.
1. Turn off the machine.
2. Exit ScanGear (scanner driver), then disconnect the USB cable from the computer and reconnect
it.
3. Turn on the machine.
ScanGear (scanner driver) cannot be opened in multiple applications at the same time. Within an
application, ScanGear (scanner driver) cannot be opened for the second time when it is already
open.
Be sure to close the ScanGear (scanner driver) window before closing the application.
Make sure that you have adequate disk space available when scanning large images at high
resolutions. For example, at least 300 MB of free space is required to scan an A4 document at 600
dpi in full-color.
ScanGear (scanner driver) and WIA driver cannot be used at the same time.
Do not enter the computer into sleep or hibernate state during scanning.
Calibration may take time if the machine is connected via USB 1.1.
Applications with Restrictions on Use

If you start Media Center included in Windows XP Media Center Edition 2005, you may not be able to
scan using the Operation Panel of the machine. In that case, restart the computer.
You cannot scan images with Media Center included in Windows Vista and Windows XP Media
Center Edition 2005. Scan with other applications such as MP Navigator EX.
In some applications, you may encounter a problem when you use Multi-Crop in the Advanced Mode
tab of ScanGear (scanner driver). In that case, scan each document individually, changing Paper
Size according to the document.
In some applications, if you select the View scanned images checkbox in the Auto Scan Mode tab of
ScanGear (scanner driver), the window displaying the thumbnails of the scanned images may close
automatically.
Some applications may not display the TWAIN user interface. In that case, refer to the application's
manual and change the settings accordingly.
Some applications do not support continuous scanning of multiple images. In some cases, only the
first scanned image is accepted, or multiple images are scanned as one image.
When scanning platen size images into a Microsoft Office application (such as Word, Excel or
PowerPoint), click Custom Insert in the Insert Picture from Scanner or Camera dialog box.
Otherwise, images may not be scanned correctly.
Images may not be scanned correctly in some applications. In that case, increase the operating
system's virtual memory and retry.
When image size is too large (such as when scanning large images at high resolution), your
computer may not respond or the progress bar may remain at 0% depending on the application. In
that case, cancel the action (for example by clicking Cancel on the progress bar), then increase the
operating system's virtual memory or reduce the image size/resolution and retry. Alternatively, scan
the image via MP Navigator EX first, then save and import it into the application.
Page top
Appendix
Advanced Guide > Appendix
Appendix
Printing Area
How to Detach/Attach the Document Cover

Updating the MP Drivers
Uninstalling the On-Screen Manuals

Transporting the Machine

Connecting the Printer to the Network
Page top
Printing Area
Advanced Guide > Appendix > Printing Area
Printing Area
To ensure the best print quality, the machine allows a margin along each edge of media. The actual
printable area will be the area inside these margins.
Recommended printing area

Printable area
: Canon recommends that you print within this area.
: The area where it is possible to print.
However, printing in this area can affect the print quality or the paper feed precision.
Note
Borderless Printing
By selecting Borderless Printing option, you can make prints with no margins.
When performing Borderless Printing, slight cropping may occur at the edges since the printed
image is enlarged to fill the whole page.
For Borderless Printing, use the following paper.
Glossy Photo Paper "Everyday Use" GP-501
Photo Paper Glossy GP-502
Photo Paper Plus Semi-Gloss SG-201
Photo Paper Pro Platinum PT-101
Photo Paper Plus Glossy II PP-201
Photo Paper Pro II PR-201
Matte Photo Paper MP-101
Performing Borderless Printing on any other type of paper may substantially reduce printing quality
and/or result in printouts with altered color hues.
Borderless Printing on plain paper may result in printouts with reduced quality. Use them only for
test printing. You can perform Borderless Printing on plain paper only when printing from your
computer.
Depending on the type of paper, Borderless Printing may reduce the print quality at the top and
bottom edges of the paper or cause these parts to become smudged.
When performing Borderless Printing in copy or easy photo reprint mode, you can specify the
amount of images that extends off the paper by Extended copy amount in Print settings under
Device settings.
Letter, Legal
Envelopes
Other Sizes than Letter, Legal, Envelopes
Page top
Advanced Guide > Appendix > Printing Area > Other Sizes than Letter, Legal, Envelopes

Size
Printable Area (width x height)
A5
5.56 x 7.95 inches / 141.2 x 202.0 mm
A4
8.00 x 11.38 inches / 203.2 x 289.0 mm
B5
6.90 x 9.80 inches / 175.2 x 249.0 mm
4" x 6" / 10 x 15 cm
3.73 x 5.69 inches / 94.8 x 144.4 mm
4" x 8" / 10 x 20 cm*
3.73 x 7.69 inches / 94.8 x 195.2 mm
5" x 7" / 13 x 18 cm*
4.73 x 6.69 inches / 120.2 x 169.8 mm
8" x 10" / 20 x 25 cm
7.73 x 9.69 inches / 196.4 x 246.0 mm
Wide
3.73 x 6.80 inches / 94.8 x 172.6 mm
* This page size can be used only when printing from your computer.

Printable area
Page top
Letter, Legal
Advanced Guide > Appendix > Printing Area > Letter, Legal
Letter, Legal
Size
Printable Area (width x height)
Letter
8.00 x 10.69 inches / 203.2 x 271.4 mm
Legal*
8.00 x 13.69 inches / 203.2 x 347.6 mm

Printable area
Page top
Envelopes
Advanced Guide > Appendix > Printing Area > Envelopes
Envelopes
Size
Recommended Printing Area (width x height)
European DL*
4.06 x 7.50 inches / 103.2 x 190.5 mm
US Comm. Env. #10*
3.86 x 8.34 inches / 98.0 x 211.8 mm

Page top
Advanced Guide > Appendix > How to Detach/Attach the Document Cover

Detaching the Document Cover:
Hold up the Document Cover vertically and then pull up it slantingly.
Attaching the Document Cover:

Fit both hinges (A) of the Document Cover into the holder (B) and insert both hinges of the Document
Cover vertically as illustrated bellow.
Page top
Advanced Guide > Appendix > Deleting the Undesired Print Job

If the printer does not start printing, the print job data cancelled or failed may be remaining.
Delete the undesired print job by using the Canon IJ Status Monitor.
1. Display the Canon IJ Status Monitor

Click the Status Monitor button displayed on the Task Bar.
The Canon IJ Status Monitor appears.
2. Display the print jobs

Click Display Print Queue....
The Print Queue window opens.
3. Delete the print jobs

Select Cancel All Documents from the Printer menu.
When the confirmation message appears, click Yes.
The print job is deleted.
Important
Users who have not been granted access permission for printer management cannot delete the
print job of another user.
Page top
Advanced Guide > Appendix > Updating the MP Drivers

Obtaining the Latest MP Drivers

Before Installing the MP Drivers
Page top
Advanced Guide > Appendix > Updating the MP Drivers > Obtaining the Latest MP Drivers

The MP Drivers include a printer driver and scanner driver (ScanGear).
By updating the MP Drivers to the latest version of the MP Drivers, unresolved problems may be solved.
Access our web site through the Internet and download the latest MP Drivers for your model.
Important
You can download the MP Drivers for free, but any Internet access charges incurred are your
responsibility.
Before installing the latest MP Drivers, delete the previously installed version.
For information on how to delete the MP Drivers, refer to Uninstalling the MP Drivers .
Related Topics
Page top
Advanced Guide > Appendix > Updating the MP Drivers > Uninstalling the MP Drivers

The MP drivers you no longer use can be deleted.
When deleting the MP drivers, first exit all programs that are running.
The procedure to delete the unnecessary MP drivers is as follows:
If there is an uninstaller
1. Start the uninstaller

In Windows Vista or Windows XP, select the Start menu -> All Programs -> "Your model name" ->
MP Drivers Uninstaller.
In Windows 2000, select the Start menu -> Programs -> "Your model name" -> MP Drivers
Uninstaller.
The MP Drivers Uninstaller dialog box is displayed.
Important
In Windows Vista, a confirmation/warning dialog box may appear when installing, uninstalling
or starting software.
This dialog box appears when administrative rights are required to perform a task.
If you are logged on to an administrator account, click Continue or Allow to continue.
Some applications require an administrator account to continue. If you are logged on to a
standard account, switch to an administrator account, and restart the operation from the
beginning.
2. Execute the uninstaller

Click Execute. When the confirmation message appears, click Yes.
When all the files have been deleted, click Complete.
The deletion of the MP Drivers is completed.
Important
Printer driver and scanner driver (ScanGear) will be deleted if you uninstall the MP Drivers.
If there is no uninstaller
If there is no uninstaller in the Start menu of Windows Vista, follow these steps:
1. Select the printer to be deleted

Select the Start menu -> Control Panel -> Hardware and Sound -> Printers.
Click the model to delete, then press the Alt key on your keyboard. On the File menu, click Delete.
2. Delete the printer

If the User Account Control dialog box appears, click Continue. Then when the confirmation
message appears, click Yes.
The icon is deleted.
3. Select the printer driver to be deleted

Press the Alt key. On the File menu, select Run as administrator, and then click Sever Properties....
If the User Account Control dialog box appears, click Continue.
Click the Drivers tab. In the Installed printer drivers list, click the printer to delete.
4. Delete the printer driver

When you click Remove..., Remove Driver And Package dialog box is displayed.
Select Remove driver and driver package, and then click OK.
In the confirmation dialog box, click Yes.
When data collection is completed in the Remove Driver Package dialog box, click Delete.
5. Click OK.
The deletion of the printer driver is complete.
Important
You may not be able to delete the printer driver properly from the Installed printer drivers list.
If this happens, restart your computer, and try again.
Page top
Advanced Guide > Appendix > Updating the MP Drivers > Before Installing the MP Drivers

This section describes the items that you should check before installing the MP Drivers. You should also
refer to this section if the MP Drivers cannot be installed.
Check the machine status

Properly connect the personal computer and the machine. For details on connection instructions,
refer to the "Install the Software" in the manual: Getting Started.
Turn off the machine.
Check the Personal Computer Settings

Terminate all running applications.
In Windows Vista, log on as a user who has the administrator rights.
In Windows XP, log on as the computer administrator.
In Windows 2000, log on as a member of the Administrators group.
Note
If an old version of the MP Drivers is already installed, first delete (uninstall) that version. For
instructions on deleting the MP Drivers, see Uninstalling the MP Drivers .
Related Topics
Page top
Advanced Guide > Appendix > Updating the MP Drivers > Installing the MP Drivers

You can access our web site through the Internet and download the latest MP Drivers for your model.
The procedure for installing the downloaded MP Drivers is as follows:
1. Turn off the machine

Important
If you turn on the computer while the machine is on, the Windows Plug and Play function is
executed automatically, and the Found New Hardware window (Windows Vista) or Found New
Hardware Wizard window (Windows XP, Windows 2000) is displayed. In this case, click
Cancel.
2. Start the installer

Double-click the icon of the downloaded file.
The installation program starts.
Important
In Windows Vista, a confirmation/warning dialog box may appear when installing, uninstalling
beginning.
3. Install the driver

At the Welcome window, click Next.
Read the contents of the License Agreement window. After checking the contents, click Yes.
Installation of the MP Drivers begins.
After the Installation Complete window is displayed, check that the machine and the computer are
connected through a cable.
To select the connection port for your machine manually, check the Select printer port check box, and
click Manual selection. At the Select printer port window, select the connection destination, and then
click OK.
4. Complete the installation

Click Complete.
Turn on the machine, and wait awhile until the connection is recognized.
This procedure installs the MP Drivers.
Depending on the environment you are using, a message prompting you to restart the computer may be
displayed. To complete the installation properly, restart the computer.
Important
You can download the MP Drivers for free, but any Internet access charges incurred are your
responsibility.
Related Topics
Page top
Advanced Guide > Appendix > Uninstalling the On-Screen Manuals

Follow the procedure below to uninstall all of the installed on-screen manuals from your computer.
All of the installed on-screen manuals will be deleted at the same time.
1. Click Start > All Programs (Programs in Windows 2000) > Canon XXX Manual
(where "XXX" is your machine's name) > Uninstall.
2. Click OK when the confirmation message appears.

Note
When the message prompting you to restart your computer is displayed, click OK to restart your
computer.
On-screen manuals other than printer driver's help and scanner driver's help are uninstalled at a time.
1.
Select Applications on the Go menu.
2.
Double-click the Canon Utilities folder, and then the IJ Manual folder.
3.
Drag the folder of your machine's name into the trash.
4.
Drag the
XXX On-screen Manual icon (where " XXX" is your machine's name) on your
desktop into the trash.
Page top
Advanced Guide > Appendix > Transporting the Machine

When relocating the machine, pack the machine using the original packing materials.
If you do not have the original packing materials, pack the machine carefully using protective material
and place it inside a sturdy box.
Caution
Do not transport or store the machine slanted, vertically, or upside-down, as the ink may leak and
damage the machine.
1. Turn the machine off.

2. Confirm that the Power lamp is off and unplug the machine.
Important
Do not unplug the machine while the Power lamp is lit or flashing green, as it may cause
malfunction or damage to the machine, making the machine unable to print.
3. Retract the Paper Support and the Output Tray Extension, close the Paper Output
Tray, then close the Operation Panel.
4. Disconnect the printer cable from the computer and from the machine, and then
disconnect the power plug from the machine.
5. Use adhesive tape to secure all the covers on the machine to keep them from
opening during transportation. Then pack the machine in the plastic bag.
6. Attach the protective material to the machine when packing the machine.
Important
Pack the machine with the Print Head and ink tanks left installed in the machine.
Note
Clearly label the box as "FRAGILE" or "HANDLE WITH CARE".
Page top
Advanced Guide > Appendix > Opening the Printer Properties Dialog Box (Windows)

The printer driver setup window can be displayed through the application software in use or the Start
menu of the Windows.
Open the Printer Properties Dialog Box through the Application Software
Follow the procedure below to configure print settings when printing.
1.
Select the command you perform printing on the application software in use.
In general, select Print on the File menu to open the Print dialog box.
2.
Select your model name and click Preferences (or Properties).

Note
Opening the printer properties dialog box through Properties displays such tabs
regarding the Windows functions as the Ports (or Advanced) tab. Those tabs do not
appear when opening through Printing Preferences or application software. About tabs
regarding Windows functions, refer to the user's manual for the Windows.
Open the Printer Properties Dialog Box through the Start Menu
Follow the procedure below to perform maintenance operations such as print head cleaning, or to
configure print settings that are common for all application software.
1.
Select items from the Start menu as shown below.
In Windows Vista, select the Start menu > Control Panel > Hardware and Sound > Printers.
In Windows XP, select the Start menu > Control Panel > Printers and Other Hardware >
Printers and Faxes.
In Windows 2000, select the Start menu > Settings > Printers.
2.
Right-click your model name icon and then select Printing Preferences from the displayed
menu.

Important
Depending on application software you use, command names or menu names may vary
and there may be more steps. For details, refer to the user's manual of your application
software.
Page top
Advanced Guide > Appendix > Opening the Page Setup and Print Dialog Box (Macintosh)

You can open the Page Setup dialog box and the Print dialog box from the application program you are
using.
Opening the Page Setup Dialog Box

Open the Page Setup dialog box to specify page (paper) settings before printing.
1.
Select Page Setup... on the File menu in your application program.
The Page Setup dialog box opens.
Opening the Print Dialog Box

Open the Print dialog box to specify print settings before printing.
1.
Select Print... on the File menu in your application program.
The Print dialog box opens.

Page top
Advanced Guide > Appendix > Opening the Canon IJ Printer Utility (Macintosh)

To open the Canon IJ Printer Utility, follow the procedure below.
In Mac OS X v.10.5.x
1.
Select System Preferences on the Apple menu.
2.
Click Print & Fax.
3.
Select your machine's name in the Printers and click Open Print Queue....
The job list of your machine is displayed.
4.
Click Utility.
The Printer List opens.
5.
Select your machine's name in the Product list and click Maintenance.
The Canon IJ Printer Utility starts up.
In Mac OS X v.10.4.x or Mac OS X v 10.3.9
1.
Select Applications on the Go menu.
2.
Double-click the Utilities folder, and then double-click the Printer Setup Utility icon.
The Printer List opens.
3.
Select your machine's name in the Name list and click Utility.
4.
Select your machine's name in the Product list and click Maintenance.
The Canon IJ Printer Utility starts up.

Page top
Advanced Guide > Appendix > Connecting the Printer to the Network

If multiple computers are being used in the network environment, you can share the printer connected to
one computer with other computers.
The Windows versions of the computers connected to the network do not necessarily have to be the
same.
Settings on Print Server
Describes the procedure for setting up a computer directly connected to a printer with a USB cable.
Settings on Client PC
Describes the procedure for setting up those computers that will use this printer through the
network.
When you execute print, the data is sent through the print server system to the printer.
Important
In case an error occurred when a document is printed by the client system to a shared printer, the
error message of Canon IJ Status Monitor will be displayed both on the client system and the print
server system. For regular printing, Canon IJ Status Monitor will be displayed only on the client
system.
Note
Install the printer driver from the Setup CD-ROM that accompanies the machine on the print server
system and each of the client systems according to the OS of each system.
Related Topic
Restrictions on Network Printing
Page top
Advanced Guide > Appendix > Connecting the Printer to the Network > Settings on Print Server

To use a printer in a network, set printer sharing on the print server system.
The procedure for setting up the print server systems is as follows:
1. Install the printer driver on the print server system

For installation instructions, see the user's manual.
2. Select items from the Start menu as shown below:

In Windows Vista, select the Start menu -> Control Panel -> Hardware and Sound -> Printers.
Printers and Faxes.
In Windows 2000, select the Start menu -> Settings -> Printers.
The Printers window (Windows Vista, Windows 2000) or Printers and Faxes window (Windows XP)
is displayed.
3. Click the icon for the model name of printer to be shared

In Windows Vista, press the Alt key on your keyboard and then select Run as administrator ->
Sharing... from the displayed File menu.
In Windows XP or Windows 2000, select Sharing... from the File menu.
Note
Windows XP may display a message recommending the user to use the Network Setup
Wizard to set up sharing.
When this message appears, choose not to use the wizard and then set up sharing.
4. Set sharing
Select Share this printer (Windows Vista, Windows XP) or Shared as (Windows 2000) on the
Sharing tab to set a shared name as desired, and click OK.
Important
In Windows Vista, a confirmation/warning dialog box may appear when installing, uninstalling,
beginning.
This completes the setup on the print server system. Next, set up the client systems.
Page top
Advanced Guide > Appendix > Connecting the Printer to the Network > Settings on Client PC
After setting up the print server system, set up the client system.
The procedure for setting up the client systems is as follows:
In Windows Vista
1. Install the printer driver on the client systems

Select Custom Install for the installation method.
For details on connection instructions, refer to the "Install the Software" in the manual: Getting
Started.
Note
During the installation, a screen prompting you to turn the printer on appears. Click Manual
Selection and then select an appropriate port to complete your installation.
2. Start the wizard

Select the Start menu -> Network -> Add a printer.
The Add Printer window appears.
3. Add a printer
Select Add a network, wireless or Bluetooth printer, and click the icon for the printer that you have
configured on the print server system to be shared, and then click Next.
Note
If the icon for the printer is not displayed, check that the printer is actually connected to the print
server.
It may take some time for the icon for the printer to appear.

Take the appropriate action as described on the screen and then click Finish.
The icon for the shared printer will be created in the Printers window.
This completes the setup on the client systems. You can now share the printer in the network.
In Windows XP/Windows 2000
1. Install the printer driver on the client systems

Select Custom Install for the installation method.
For details on connection instructions, refer to the "Install the Software" in the manual: Getting
Started.
Note
During the installation, a screen prompting you to turn the printer on appears. Click Manual
Selection and then select an appropriate port to complete your installation.
2. Start the wizard

Printers and Faxes -> Add a printer.
In Windows 2000, select the Start menu -> Settings -> Printers -> Add a printer.
When Welcome to the Add Printer Wizard screen appears, click Next.
3. Add a printer
Select A network printer, or a printer attached to another computer (Windows XP) or Network printer
(Windows 2000), then click Next.
On the Specify a Printer window (Windows XP) or Locate Your Printer window (Windows 2000), click
Next and then search for the print server system.
Click the icon for the printer that you have configured on the print server system to be shared, and
then click Next.
Note
If the icon for the printer is not displayed, check that the printer is actually connected to the print
server.

Take the appropriate action as described on the screen and then click Finish.
The icon for the shared printer will be created in the Printers and Faxes window (Windows XP) or
Printers window (Windows 2000).
This completes the setup on the client systems. You can now share the printer in the network.
Page top
Advanced Guide > Appendix > Connecting the Printer to the Network > Restrictions on Network Printing

These are restrictions that apply if you are using a printer in a network environment. Check the
restrictions for the environment you are using.
If you are sharing a printer in a network

A print completion message may be displayed. To disable the message display, follow the
procedure below.
In Windows Vista:
Press the Alt key from the Printers window on the client system. Open Run as administrator ->
Server Properties... from the displayed File menu.
Uncheck Show informational notifications for network printers on the Advanced tab, and then
restart the computer.
In Windows XP or Windows 2000:
Open Server Properties from the File menu of the Printer and Faxes window (Windows XP) or the
Printers window (Windows 2000) on the print server system.
Uncheck Notify when remote documents are printed on the Advanced tab, and then restart the
computer.
The bi-directional communication function is disabled so that the correct printer status may not be
recognized.
If a client user opens the printer driver properties and then clicks OK with the Enable bidirectional
support check box on the Ports tab unchecked, the bi-directional function of the printer server system
may also be disabled.
In this case, check Enable bidirectional support check box on both the print server system and the
client system.
When you print from a client system, you cannot use Canon IJ Preview.
If the functions on the Maintenance tab cannot be set properly from a client system, they may be
grayed out. In this case, change the settings from the print server.
When you change the settings of the print server, you should delete the icon of the shared printer
from the client system, and then specify the shared settings again in the client system.
If the same printer driver is installed in the print server system and the client system as
the local printer
The net crawl function may automatically create a network printer icon on the client system.
Page top
Advanced Guide > Using Easy-PhotoPrint EX
--- Transforming Your Photos into Creative Works of Art --Easy-PhotoPrint EX allows you to create albums, calendars and stickers easily using photos taken with
digital cameras.
You can also print borderless photos easily.
Start Easy-PhotoPrint EX
Click Here: Easy-PhotoPrint EX
Note
See the section below for details on how to use Easy-PhotoPrint EX.
Create a Personalized Photo Album

Creating a personalized photo album is an easy task if you use Easy-PhotoPrint EX!
All you need to do is select which photos to use, select a layout, then load paper into your printer and
print. After you bind the printed sheets, you'll have the one and only album of your memories!
You can change the layout and background, and attach

comments to photos.
You can also select the size and orientation.
You can arrange a photo across the left and right

pages.
CHECK!
Select a theme (background design) to create a single-themed album.
Decorate Items with Text and Frames

You can add text and frames to photos. Attach a description of the photo in an album, and add a frame to
enhance the photo's atmosphere.
CHECK!
Select Album to add text and frames. You cannot decorate photos with Photo Print.
Create a Calendar Using Your Favorite Photos

Create calendars easily with Easy-PhotoPrint EX. Create your own calendar using your favorite photos!
It'll be exciting to turn the calendar pages.
You can use all kinds of photos.
You can also create 2-month, 6-month and 12-month

calendars.
Create Stickers
Create stickers easily with Easy-PhotoPrint EX!
Create stickers of your favorite photos and share them with your friends!
CHECK!
You can add text to photos.
Page top
Advanced Guide > Using MP Navigator EX
MP Navigator EX is an application that enables you to easily scan photos and documents. It is suitable
even for beginners.
Start MP Navigator EX
Click Here: MP Navigator EX
Note
See "Let's Try Scanning " for details on how to scan images using MP Navigator EX.
Scan Photos and Documents

You can scan easily by navigating through MP Navigator EX screens. You can also save/print scanned
images using MP Navigator EX.
Scan Small Documents at One Time

You can scan multiple small documents (photos, cards, etc.) at one time. It is useful as you do not need
to scan multiple times.
Scan Large Documents

You can easily scan documents that are larger than the Platen using MP Navigator EX. It allows you to
scan the left and right halves of a document separately and combine them back into one image.
Scan with One-click

In One-click Mode, MP Navigator EX completes from scanning to saving, with a click of an icon. One-click
Mode also allows you to scan and save images as PDF files or attach them to e-mail automatically.
Scan and Correct/Enhance Photos

You can easily correct/enhance scanned photos using MP Navigator EX. You do not need to use other
applications.
For details on how to use MP Navigator EX, refer to " Scanning with the Bundled Application Software ."
Page top
About Solution Menu
Advanced Guide > About Solution Menu
About Solution Menu

Quick Shortcut!! Solution Menu
Solution Menu is a menu window that provides quick access from your desktop to Canon applications,
manuals, and online product information.
Important
The number and types of buttons displayed in the window may vary depending on your printer and
region.
Starting Solution Menu

Click Here: Solution Menu
To start from desktop, see below.
Double-click the Solution Menu icon on the desktop. Alternatively, from the Start menu, select (All)
Programs > Canon Utilities > Solution Menu > Solution Menu.
From the next time, Solution Menu starts when Windows starts.
If the Start Solution Menu when Windows starts checkbox at the bottom left of the window is not selected,
Solution Menu does not start when Windows starts.
Important
Solution Menu will start automatically when you install it using the Setup CD-ROM that
accompanies the printer.
Changing the Window Size

(window size: large) or
Click
(large or small).
(window size: small) on the title bar to change the window size
Solution Menu opens with the last used window size next time it is started.
When screen size is small
About Solution Menu
Starting an Application
1. Point to a button on the window to display the description of each application.

2. By clicking each button, the introduced application starts.
Follow the same steps to view the manuals or online product information.
Important
Internet connection is required to access the online information. Internet connection fees apply.
Exiting Solution Menu

Click
(Close) on the title bar.
Restriction on Use of Solution Menu

This software is subject to the following restriction. Keep this point in mind when using it.
All icons of the installed applications that support Solution Menu are displayed in the window. After
the installation, you cannot rearrange the icons or delete only the icons.
Page top

Manual Canon

Uploaded by

Document Informationclick to expand document informationinstructiuni

Document Informationclick to expand document information

Copyright:

Available Formats

Manual Canon

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Manual Canon

Uploaded by

Copyright:

Available Formats

MP540 series On-screen Manual

Page 1 of 758 pages

How to Use This Manual

Printing This Manual

Describes the summary of

Describes the detailed

MP540 series Basic Guide

Page 2 of 758 pages

How to Use This Manual

Printing the Notebook or Graph Paper

How to Navigate Menus on the LCD

Printing Photos Directly from Your Mobile Phone

Printing from a Memory Card

Printing Photos Saved on the Memory Card

Using Various Functions

Loading Paper / Originals

Loading Originals to Copy or Scan

Printing Photos from Printed Photos

When Printing Becomes Faint or Colors Are

Reprinting Printed Photos

Cleaning the Paper Feed Roller

Using Various Functions

Cleaning the Pad in the Cassette

Saving Scanned Data

Legal Limitations on Use of Your Product and

Printing from Your Computer

Printing Documents (Windows)

Tips on How to Use Your Machine

Overview of the Machine

Page 3 of 758 pages

Contents > Overview of the Machine

Overview of the Machine

How to Navigate Menus on the LCD

Page 4 of 758 pages

Contents > Overview of the Machine > Main Components

(1) Document Cover

(2) Paper Support

(3) Paper Guides

(4) Rear Tray

(5) LCD (Liquid Crystal Display)

(6) Operation Panel

(7) Card Slot Cover

(8) Direct Print Port

Page 5 of 758 pages

(9) Paper Output Tray

(10) Output Tray Extension

(11) Platen Glass

(13) USB Port

(14) Rear Cover

(15) Power Cord Connector

(16) Ink lamp

(17) Print Head Lock Lever

(18) Print Head Holder

(19) Scanning Unit (Cover)

(20) Card Slot

(21) Access lamp

Page 6 of 758 pages

Page 7 of 758 pages