Scribd Logo
Upload

Welcome to Scribd!

  • 622 views

    Interroll Zone Control Card

    Uploaded by

    musarraf172
    The ZoneControl is a single zone control for the RollerDrive EC310 conveyor that allows for stand-alone, zero pressure accumulation conveyors without needing additional controls. It provides functions for conveyor logic, speed adjustment, and communication between zones. The ZoneControl configuration can be handled through DIP switches and it includes inputs and outputs to control additional functions through digital and analog signals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Interroll Zone Control Card

    Uploaded by

    musarraf172
    622 views2 pages
    The ZoneControl is a single zone control for the RollerDrive EC310 conveyor that allows for stand-alone, zero pressure accumulation conveyors without needing additional controls. It provides functions for conveyor logic, speed adjustment, and communication between zones. The ZoneControl configuration can be handled through DIP switches and it includes inputs and outputs to control additional functions through digital and analog signals.

    Original Description:

    Manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The ZoneControl is a single zone control for the RollerDrive EC310 conveyor that allows for stand-alone, zero pressure accumulation conveyors without needing additional controls. It provides functions for conveyor logic, speed adjustment, and communication between zones. The ZoneControl configuration can be handled through DIP switches and it includes inputs and outputs to control additional functions through digital and analog signals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    622 views2 pages

    Interroll Zone Control Card

    Uploaded by

    musarraf172
    The ZoneControl is a single zone control for the RollerDrive EC310 conveyor that allows for stand-alone, zero pressure accumulation conveyors without needing additional controls. It provides functions for conveyor logic, speed adjustment, and communication between zones. The ZoneControl configuration can be handled through DIP switches and it includes inputs and outputs to control additional functions through digital and analog signals.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Zo n eC o n t r o l

    The ZoneControl is the single zone control for the RollerDrive EC310. The ZoneControl can be used to create
    stand-alone, zero pressure accumulation conveyors which require no higher-order control. Additional functions and
    communication to upstream and downstream conveyors can be provided via digital inputs and outputs (I/Os). No
    DriveControls are needed to set up a conveyor as the ZoneControls include their functions.
    Design
    information
    Configuration

    The I/Os and voltage supply is provided by a simple switching wire.


    Communications cable: Conventional Cat-5 cable (IT ethernet cable).
    The configuration of the ZoneControl can simply be handled by DIP switches. Two versions of conveyor logic are
    available: individual or block pull-off.

    Functions

    106

    Electrical data
    Rated voltage
    Temporarily permissible voltage range
    Permissible voltage undulation
    Rated current
    Max. start-up current
    Fuse
    Protection rate
    Ambient conditions
    Ambient temperature in operation
    Ambient temperature during transport and storage
    Max. temperature change
    Max. air humidity
    Cable cross-sections
    Power Supply
    Inputs / Outputs (I/O)

    ZoneControl

    24V DC
    18to26V DC
    3 %, recommended: < 1 %
    2.0A
    5.0A
    present, non-replaceable
    IP20

    0to+40C
    -20to+75C
    1 % in 3 h; 2 cycles in compliance with IEC 60068-2-14
    90 %, non-condensing

    Fine-wired, 1.5 mm (AWG 16)


    Fine-wired, 0.08 to 0.5 mm (AWG 28 to 20)

    Logic for zero pressure accumulation conveying (incl. initialisation)

    Communication with upstream and downstream zones via peer-to-peer connection

    Speed adjustment
    -- DIP switch (per accumulation zone)
    -- External analogue signal (for the entire conveyor system)

    The effective current in the application depends on the conveyor weight, conveyor speed and number of cycles.

    Adjustment of the RollerDrives direction of rotation


    -- DIP switch
    -- External digital signal

    Reference number: 89RC

    LED status indicator

    Zone sensor connection

    Start sensor connection

    NPN or PNP switching logic

    Switching a second RollerDrive, status reading, starting and stopping of individual zones via I/Os

    Empty running, error signalling of all connected zones via I/Os

    All signals relate to mass of voltage supply

    DriveControls Overviewp100

    DriveControl

    Technical Data

    Product Description
    Properties

    The accumulation conveyor logic for RollerDrive EC310

    RollerDrive EC310p88

    RollerDrive EC310 IP66p96

    Material Specification p 222

    Refer to the Planning Section from p 168 onwards for help with planning and design

    107

    Zo n eC o n t r o l
    Dimensions and Connections

    The accumulation conveyor logic for RollerDrive EC310


    Pos. 4

    ZoneControl

    Power

    130
    118

    DriveControl

    1
    2

    Earth
    +24 V DC

    1
    2
    3
    4
    5
    6
    7
    8

    Start signal for 2nd RollerDrive in zone


    Free travel signal
    Speed (central)
    Direction of rotation (central)
    Fault output
    Zone status
    Zone start
    Zone stop

    1
    4

    6.5

    55

    42

    Pos. 5

    Inputs/Outputs

    6.5
    6

    3
    108

    2.5
    24

    Pos. 1

    Pos. 2

    Pos. 3

    RollerDrive Connection
    1
    2
    3
    4
    5

    +24 V DC
    Direction of rotation
    Earth
    Fault input
    Analogue speed output

    1
    2
    3

    +24 V DC
    Sensor signal input
    Earth

    1
    2
    3

    +24 V DC
    Sensor signal input
    Earth

    Construction

    Start sensor

    Zone sensor

    Fig.:Wiring diagram for ZoneControl for 3 conveyor zones

    108

    DriveControls Overviewp100

    RollerDrive EC310p88

    RollerDrive EC310 IP66p96

    1 Zone 1

    6 Zone sensor

    2 Zone 2

    7 RollerDrive

    3 Zone 3

    8 +24 V DC voltage supply

    4 Conveyor direction

    9 Peer-to-peer connection

    5 ZoneControl

    10 Material to be conveyed

    Material Specification p 222

    Refer to the Planning Section from p 168 onwards for help with planning and design

    109

    You might also like