Boq (Addendum#2) March 10, 2016

SUMMARY OF PRICES FOR HVAC WORKS
Item #
Description
230010
General Requirements for HVAC System
230100
Operation and maintenance of HVAC System
230500
Common Work Results for HVAC
230700
HVAC Insulation
230800
Commissioning of HVAC
230900
Instrumentation and Control for HVAC
232300
Refrigerant Piping
232500
HVAC Water Treatment
233100
HVAC Ducts and Casings
233300
Air Duct Accessories
233600
Air Terminal Units
233700
Air Outlets and inlets
234100
Particulate Air Filters
235200
Heating Boiler
236400
Chillers
236500
Cooling Tower
237300
Air handling Unit
238200
Convection Heating and Cooling Units
TOTAL COST OF HVAC WORKS
Total Cost Pak Rupees
Updated BOQ (Adden
PARKING BUILDING
(Basement -2 & Baseme
Item #
Description
Unit
Quantity
230010
General Requirements for HVAC System
a.
Making of Shop Drawings with sectional details

complete in all respect for complete HVAC Systems as per Specifications
Job
Making of As Built Drawings with sectional details

complete in all respect for complete HVAC Systems as per Specifications
Job
Equipment foundations and shifting of equipment from

Ground Floor to respective locations including Owner
Supplied Equipment.
Job
Excavation and backfilling the earth for pipe works as

required to complete the HVAC Works as per
Drawings and Specifications.
Job
b.
c.
d.
e.
Painting and identification works of all components,

supports, hangers & brackets etc. complete in all respect as per drawings and
specifications.
1
Job
f.
Contractor to list and price below with quantities any

additional item(s) and/or quantities which are not included but required to complete the
lumpsum tender price for this section of works. Should the tenderer fail to insert any
item(s) and/or quantities here, it will be deemed that this lumpsum price for the
tender includes all items and no subsequent cliams for any additional item will be
entertained.
230100
230113
a.
One month test run
b.
Operation of mainteance of HVAC System for one

Job
year
Special tools and instruments for operation and
Job
maineance
Common Work Results for HVAC
Motor Control Center (MCC)
Supply, Installation of Motor Control Centre (MCC)
complete in all respect including weather proof sheet metal cabinet, bus bars, internal
wiring earth strip, connector strip, MCB, MCCB, Control fueses, magentic contactor,
overload relay, indication lights, voltmeter, ammeter, under voltage phase reversible,
phase failure device, selector switch, related civil works etc. complete in all
respects for HVAC equipment including Owner supplied HVAC equipment as per
scheudle, speicifications and drawings.
c.
230500
230513.13
a.
230513.16
a.
Wires, Cables, Conduites and Cable Tray

Supply and installation of of wire, cables, conduites
and cable tray for power supply, earthing and controls of HVAC system complete in all
respect as per drawings and specifications.
230516
Expansion fittings and loops
Job
1
1
1
Nos
Job
a.
Supply and installation of expansion fittings and loops

for HVAC system complete in all respect as per drawings and specifications.
230519
a.
Job
Meters and gages for HVAC Piping

Supply, installation, testing and commissioning of meters and gagues and accessories
for HVAC piping complete in all respect as per drawings and specifications
1
Job
230523
a.
General-Duty Valves for HVAC Piping

Supply, installation, testing and commissioning of valves complete with flanges and
all other accessories for HVAC piping complete in all respect as per drawings and
specifications
1
Lot
PARKING BUILDING
Item #
Description
Unit
Quantity
230526
Hangers and Supports for HVAC Ducting
a.
Supply, Installation & Commissioning of hangers and supports for HVAC ducting
complete in all respect as per drawings and specifications.
Job
Job
Job
Seismic Controls for HVAC System

Supply, Installation & Commissioning of Seismic controls for HVAC system complete in
all respect as per drawings and specifications.
Job
230529.13
Hangers and Supports for HVAC Piping
a.
Supply, Installation & Commissioning of hangers and supports for HVAC piping
230529.16
Hangers and Supports for HVAC Equipment
a.
Supply, Installation & Commissioning of hangers and supports for HVAC equipment
230548
a.
230553
Identification for HVAC Ducting, Piping and

Equipment
a.
Supply, Installation & Commissioning of identification for HVAC ducting, piping and
equipment complete in all respect as per drawings and specifications.
1
Job
230579
a.
Fire Stopping
Supply, Installation & Commissioning of firestopping complete in all respect as per
drawings and specifications.
230700
HVAC Insulation
230713.13
Duct Insulation
a.
Supply and installation of 25 mm thick Fiber Glass

Insulation of density 16 kg/m3 with Aluminum Foil for Internal G.I. sheet metal ducts of
different sections for supply and return air duct with Alumninum tape and protected with
8 oz Canvas Cloth wrapping than painted anti fungus paint complete in all respect as
per schedule, specifications and drawings.
Job
sqm
PARKING BUILDING
Item #
Description
Unit
Quantity
b.
Supply and installation of 50 mm thick Pre-formed

Polyurethane Insulation of density 50 kg/m3 with bituminous kraft paper facing for
External G.I. sheet metal ducts of different sections for supply and return air duct with
Aluminum tape and protected with 8 oz Canvas Cloth wrapping, anti fungus paint sheet
metal
26 SWG protective cladding over external insulation of the exposed duct work
complete in all respect as per schedule, specifications and drawings.
230713.16
Flue Duct Insulation
a.
Supply and installation of 100 mm thick Rockwool

insulation of deisnity 50 kg/m3, mattress faced with reinforced aluminum foil on one
side complete with sheet metal 26 SWG protective cladding over external insulation of
flue duct work complete in all respect as per schedule, specifications and drawings.
230713.19
a.
Kitchen Exhaust Duct Insulation

Supply and installation of 50 mm thick Fiber Glass
Insulation of density 24 kg/m3 with Aluminum Foil for Internal G.I. sheet metal ducts of
different sections for kitchen exahust air duct with Alumninum tape and protected with 8
oz Canvas Cloth wrapping than painted anti fungus paint complete in all respect as per
schedule, specifications and drawings.
230716
HVAC Equipment Insulation
a.
Supply, installation of thermal insulation for HVAC

Equipment complete in all respect as per drawings and specifications.
230719.13
Chilled Water Piping Insulation
a.
Supply and installation of premoulded polyurethane insulation of density 50 kg/m3 with

bituminous karft paper facing for chilled water pipes, bends, tees, unions, sockets,
valves and on speicals, wrapped with
8 oz. canvas cloth than painted with anti fungus paint, protected 26 SWG painted G.I.
sheet metal cladding complete in all respect as per scheudle, specifications and
drawings.
b.
Supply, installation & commissioning of Chilled Water Valves insulation complete in all
respect as per drawings and specifications
230719.16
Hot Water Piping Insulation
a.
Supply and installation of premoulded polyurethane insulation of density 50 kg/m3 with

bituminous karft paper facing for hot water pipes, bends, tees, unions, sockets, valves
and on speicals, wrapped with 8 oz. canvas cloth than painted with anti fungus paint,
protected 26 SWG painted G.I. sheet metal cladding complete in all respect as per
scheudle, specifications and drawings.
sqm
sqm
sqm
Lot
R.m
Lot
R.m
PARKING BUILDING
Item #
Description
Unit
Quantity
b.
Supply, installation & commissioning of hot water valves insulation complete in all
respect as per drawings and specifications
230719.23
Refrigerant pipe insulation
a.
Supply and installation of 12 mm thick Pre-moulded

Armaflex Pipe Insulation complete in all respect as per schedule, specifications and
drawings.
230719.26
Condensate Drain Insulation
a.
Supply and installation of 6 mm thick Pre-moulded

Armaflex Pipe Insulation complete in all respect as per schedule, specifications and
drawings.
230800.00
Commissioning of HVAC
230813
Testing, Adjusting and balancing for HVAC

systems
a.
Testing, balancing and commissioning of HVAC

system complete in all respect including one month test run, measurement and
recording of pressure and electrical data and submission of technical/operation
manual, LOG book for each related equipment as per specifications and drawings.
230900
Instrumentation and Control for HVAC
230923
Direct-Digital Control System
a.
Supply, Installation & Commissioning of direct-digital control system complete in all

Lot
Lot
Lot
Job
Job
1
230926
Building Management System
a.
Supply, Installation & Commissioning of Building Management system complete in all

Job
1
230936
A/C Varibale Speed Drive for AHUs
a.
Supply, Installation & Commissioning of A/C variable speed drive for AHUs including
logic control assembly, adjustable variable frequency drives, adjustable variable
frequency drive bypass, transmitters etc.complete in all respect as per drawings
and specifications.
230943
Controls for Variable Speed Pumping System
a.
Supply, Installation & Commissioning of controls for variable speed pumping system
including logic control assembly, adjustable variable frequency drives, adjustable
variable frequency drive bypass, transmitters etc.complete in all respect as per
Nos
Nos
PARKING BUILDING
Item #
Description
Unit
Quantity
232113.23
Hydronic Piping
a.
Supply, Installation, testing & Commissioning of M.S Schedule 40 (as per ASME & API
standard, heavy quality with standard Schedule 40 thickness) pipes & fittings for chilled
water circulation system with bends, tees, unions, sockets as required to complete in
all respects ready to operate as per schedule, drawings and specifications.
3/4"
1"
1 1/4"
1 1/2"
2"
2 1/2"
3"
4"
5"
6"
8"
10"
12"
20"
24"
30"
b.
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
standard, heavy quality with standard Schedule 40 thickness) pipes & fittings for
condenser water circulation system with bends, tees, unions, sockets as required to
complete in all respects ready to operate as per schedule, drawings and specifications.
750mm
600mm
450mm
400mm
350mm
300mm
250mm
200mm
R.m
R.m
R.m
R.m
R.m
R.m
R.m
R.m
c.
standard, heavy quality with standard Schedule 40 thickness) pipes & fittings for hot
water circulation system with bends, tees, unions, sockets as required to complete in
all respects ready to operate as per schedule, drawings and specifications.
1 1/4"
R.m
1 1/2"
R.m
2"
R.m
2 1/2"
R.m
3"
R.m
4"
R.m
232116
Hydronic piping specialties
a.
Supply, Installation, testing & Commissioning of hydronic piping specialties alongwith

flanges, coupling, unions complete in all respect as per drawings and specifications.
232119-23
Pressurized Expansion tank
a.
Supply, Installation, testing and commissioning of insulated pressurized M.S Expansion

tank of required size and capacity including gate valve, check valve, float valve etc.
complete in all respect ready to operate as per schedule, drawings and
specifications.
Lot
Exp. Tank # 1 (For chilled water)
Nos
Exp. Tank # 2 (For Hot water)
Nos
232123
Hydronic pumps
a.
Supply, Installation, testing & Commissioning of condenser water pump-motor set

b.
P#1 (For centrifgual chiller)
Nos
P#2 (For absorption chiller)
Nos
Supply, Installation, testing & Commissioning of chilled water pump-motor set

c.
P#1 (For centrifgual chiller)
Nos
P#2 (For absorption chiller)
Nos
Supply, Installation, testing & Commissioning of hot water pump-motor set complete in
P#5
Nos
Supply, Installation, testing & Commissioning Secondary chilled water pump-motor set
P#3
Nos
PARKING BUILDING
Item #
Description
Unit
Item #
Description
Unit
Quantity
232500
HVAC Water Treatment
232513
Water treatment for closed-loop hydronic system
a.
Supply, Installation, testing & Commissioning of water treatment for closed-loop

hydronic system complete in all respect as per drawings and specifications.
232516
Water treatment for open-loop hydronic system
a.
Supply, Installation, testing & Commissioning of water treatment for open hydronic
system complete in all respect as per drawings and specifications.
233100
HVAC Ducts and Casings
233113.13
Medium/Low pressure G.I. sheet metal ducting
a.
Supply, Installation, testing & Commissioning of medium/low pressure G.I. sheet metal
ducting complete in all respect as per drawings and specifications.
b.
Job
Job
24 gauge
sqm
22 gauge
sqm
20 gauge
sqm
18 gauge
sqm
Supply, Installation, testing & Commissioning of 18 gauge G.I. sheet metal plenums
Job
1
233300
Air Duct Accessories
233313
Dampers
a.
Supply, Installation, testing & Commissioning of dampers complete in all respect as per
Volume Control Damper
Job
Fire Damper
Job
Butterfly Round Damper
Job
233343
Flexible Connectors
a.
Supply, Installation, testing & Commissioning of flexible connectors between

blower section and air duct complete in all respect as per drawings and specifications.
233400
HVAC Fans
233419.13
Blowers and fans
Job
1
1
1
Supply, Installation, testing & Commissioning of blowers and fans complete in all
Nos
a.
Centrifgual fans (cabinet type)
233419.19
Parking Ventilation System
a.
Supply, Installation, testing & Commissioning of jet fans complete in all respect as per
Nos
2400 cfm & 0.2" ESP
40
PARKING BUILDING
Item #
Description
Unit
Quantity
a.
233419-23
a.
233419-26
a.
Supply, Installation, testing & Commissioning of centrifugal cabinet type exhaust fans
Nos
Nos
8000 cfm & 1.2" ESP

Staircase pressure fan
Supply, Installation, testing & Commissioning of staircase pressurization fans complete
in all respect as per drawings and specifications.
233600
6000 cfm & 1.2" ESP

Air Terminal Units
233613
VAV and CAV Units
a.
Supply, Installation, testing & Commissioning of Variable-Air Volume Units complete in

b.
Nos
10,000 cfm & 0.5" ESP
Smoke Exhaust Fans
Supply, Installation, testing & Commissioning of smoke exhaust fans complete in
Supply, Installation, testing & Commissioning of Constant-Air Volume Units complete in

233700
Air Outlets and inlets
233713
Diffusers, Registers, and Grilles

Supply, Installation, testing & Commissioning of Diffusers, Registers and Grilles
Nos
Nos
Lot
1
Imperialine linear air diffuser 3/4" slot with volume control damper with link to adjust the
damper blades from the face of linear air diffuser complete in all respect as per
drawings and specification.
Lot
1
f.
Fresh air intake louver
Lot
g.
Exhaust air louver
Lot
233800
Ventilation Hoods
233813
Commerical-Kitchen Hoods
a.
Supply, Installation, testing & Commissioning of Commerical-Kitchen Hoods complete

in all respect as per drawings and specifications.
234100
Particulate Air Filters
234133
Air Filters
a.
Panel Air Filters
Lot
Supply, Installation, testing & Commissioning of Viscous oil type 2 inch (50 mm) thick
cleanable type Air Filters complete in all respect as per drawings and specifications.
Lot
b.
Midium Efficiency Air Filters
Supply, Installation, testing & Commissioning of 65%

efficiency Dust Spot Test, ASHRAE Standard 52.11992 Air Filters complete in all respect as per drawings and specifications.
24"x24"x24" (600mmx600mmx600mm)
Nos
Supply, Installation, testing & Commissioning of 95%

efficiency Dust Spot Test, ASHRAE Standard 52.11992 Air Filters complete in all respect as per drawings and specifications.
24"x24"x24" (600mmx600mmx600mm)
Nos
Installation, testing & Commissioning of Owner Supplied 99.997% efficiency HEPA Air
Filters with SS terminal housing and SS grill complete in all respect as per drawings
and specifications.
24"x24"x12" (600mmx600mmx300mm)
Nos
PARKING BUILDING
Item #
Description
Unit
Quantity
235200
Heating Boiler
235236
Hot Water Generator
a.
Supply, Installation, testing & Commissioning of Hot water generator complete in all
236400
Chillers
236413.13
Direct-Fired Absorption Type Water Chiller
a.
Lifting, installation & Commissioning of Owner Supplied Direct-Fired Absorption

Type Water Chillers complete in all respect as per drawings and specifications.
236416.16
Water-Cooled Centrifgual Water Chillers
a.
Lifting, installation & Commissioning of Owner Supplied Water-Cooled Centrifgual

Water Chillers complete in all respect as per drawings and specifications.
236500
Cooling Tower
236523
Cooling Tower
a.
Lifting, installation & Commissioning of Owner Supplied Cooling Towers complete in

237300
Air handling Units
237313.13
Hygienic Air handling units
a.
Installation, lifting, testing & Commissioning of Owner Supplied hygienic air handling
units complete in all respect as per drawings and specifications.
237313.16
Air handling units
a.
Installation, lifting, testing & Commissioning of Owner Supplied air handling units
238123
Computer-Room Air-Conditioners (CRAC)
a.
Supply, testing & Commissioning of Computer-Room Air-Conditioners (CRAC)

b.
Installation & Commissioning of Computer-Room Air- conditioners complete in all

238200
Convection Heating and Cooling Units
238219
Fan Coil Units
a.
Installation, testing & Commissioning of Owner Supplied Fan Coil Units complete in all
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
Nos
otal Cost Pak Rupees
Updated BOQ (Addendum#1) 29-Feb-2016
PARKING BUILDING
(Basement -2 & Basement 1)
Rate Rs.
Amount Rs.
(Block 1 & 2)
MAIN HOSPITAL BUILDING
(Lower Ground i/c. Hospital Street &
Ground to 9th Floor)
Quantity
Rate Rs.
Amount Rs.
(Block 10)
ENERGY CENTRE
(U.G Tank
Hospital Street/Sub Station, Grou
Quantity
30
PARKING BUILDING
Rate Rs.
Amount Rs.
(Block 1 & 2)
Quantity
Rate Rs.
Amount Rs.
(Block 10)
ENERGY CENTRE
(U.G Tank
Quantity
42800
PARKING BUILDING
Rate Rs.
Amount Rs.
(Block 1 & 2)
Quantity
Rate Rs.
Amount Rs.
(Block 10)
ENERGY CENTRE
(U.G Tank
Quantity
7400
23
148
6800
1200
PARKING BUILDING
Rate Rs.
Amount Rs.
(Block 1 & 2)
Quantity
Rate Rs.
Amount Rs.
(Block 10)
ENERGY CENTRE
(U.G Tank
Quantity
66
13
PARKING BUILDING
Rate Rs.
Amount Rs.
(Block 1 & 2)
Quantity
Rate Rs.
Amount Rs.
(Block 10)
ENERGY CENTRE
(U.G Tank
Quantity
1575
240
675
585
345
510
750
465
150
345
128
210
210
75
600
75
45
350
430
260
24
16
12
16
30
30
PARKING BUILDING
186
62
175
48
78
600
100
1
1
2
3
2
3
(Block 1 & 2)
3
(Block 10)
ENERGY CENTRE
(U.G Tank
Rate Rs.
Amount Rs.
Quantity
Rate Rs.
Amount Rs.
Quantity
18000
22900
9400
3400
40
PARKING BUILDING
Rate Rs.
Amount Rs.
(Block 1 & 2)
Quantity
Rate Rs.
Amount Rs.
(Block 10)
ENERGY CENTRE
(U.G Tank
Quantity
81
59
1
1
692
692
692
PARKING BUILDING
Rate Rs.
Amount Rs.
(Block 1 & 2)
Quantity
Rate Rs.
Amount Rs.
(Block 10)
ENERGY CENTRE
(U.G Tank
Quantity
15
56
100
10)
RGY CENTRE
(U.G Tank, Lower Ground i.c

spital Street/Sub Station, Ground & 1st Floor)
Rate Rs.
Amount Rs.
10)
RGY CENTRE

Rate Rs.
Amount Rs.
10)
RGY CENTRE

Rate Rs.
Amount Rs.
10)
RGY CENTRE

Rate Rs.
Amount Rs.
10)
RGY CENTRE

Rate Rs.
Amount Rs.
10)
RGY CENTRE

Rate Rs.
Amount Rs.
10)
RGY CENTRE

Rate Rs.
Amount Rs.
10)
RGY CENTRE

Rate Rs.
Amount Rs.

Boq (Addendum#2) March 10, 2016

Uploaded by

Copyright:

Available Formats

Boq (Addendum#2) March 10, 2016

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Boq (Addendum#2) March 10, 2016

Uploaded by

Copyright:

Available Formats

SUMMARY OF PRICES FOR HVAC WORKS

General Requirements for HVAC System

Operation and maintenance of HVAC System

Common Work Results for HVAC

Instrumentation and Control for HVAC

HVAC Water Treatment

HVAC Ducts and Casings

Air Duct Accessories

Air Terminal Units

Air Outlets and inlets

Particulate Air Filters

Air handling Unit

Convection Heating and Cooling Units

TOTAL COST OF HVAC WORKS

Total Cost Pak Rupees

Updated BOQ (Adden

General Requirements for HVAC System

Making of Shop Drawings with sectional details

Making of As Built Drawings with sectional details

Equipment foundations and shifting of equipment from

Excavation and backfilling the earth for pipe works as

Painting and identification works of all components,

Contractor to list and price below with quantities any

Operation and maintenance of HVAC System

Operation and maintenance of HVAC System

One month test run

Operation of mainteance of HVAC System for one

Wires, Cables, Conduites and Cable Tray

Expansion fittings and loops

Supply and installation of expansion fittings and loops

Meters and gages for HVAC Piping

General-Duty Valves for HVAC Piping

Hangers and Supports for HVAC Ducting

Seismic Controls for HVAC System

Hangers and Supports for HVAC Piping

Hangers and Supports for HVAC Equipment

Identification for HVAC Ducting, Piping and

Supply and installation of 25 mm thick Fiber Glass

Supply and installation of 50 mm thick Pre-formed

Flue Duct Insulation

Supply and installation of 100 mm thick Rockwool

Kitchen Exhaust Duct Insulation

HVAC Equipment Insulation

Supply, installation of thermal insulation for HVAC

Chilled Water Piping Insulation

Supply and installation of premoulded polyurethane insulation of density 50 kg/m3 with

Hot Water Piping Insulation

Supply and installation of premoulded polyurethane insulation of density 50 kg/m3 with

Refrigerant pipe insulation

Supply and installation of 12 mm thick Pre-moulded

Condensate Drain Insulation

Supply and installation of 6 mm thick Pre-moulded

Testing, Adjusting and balancing for HVAC

Testing, balancing and commissioning of HVAC

Instrumentation and Control for HVAC

Direct-Digital Control System

Supply, Installation & Commissioning of direct-digital control system complete in all

Building Management System

Supply, Installation & Commissioning of Building Management system complete in all