Crawler Crane Sany Type SCC 800 C

SCC800C Hydraulic Crawler Crane
Upperworks
and the auxiliary winch and locking of the

main and auxiliary luffing winch, and
Engine
locking of the swing.
Type: QSC8.3(Tier3);
Hydraulic System
Cummins inline, 6-cylinder, water-cooled,

EFI with turbo-charger and inter-cooler.
The main, auxiliary and swing rotating
Emission standard: Tier 3
brakes shall be the closed wet brake set in
Air filterTwin-stage filter composed of air

prefilter and air packed bed filter.
which shall be automatically compensated
Maximum torque: 1268Nm/1400rpm;

Operating
the reducer. When the lever is in the

neutral position, it is in braking situation,
Rated Power/Speed: 183kW/ 2000rpm;
Maximum
Hydraulic precursor control is adopted.
and no need to adjust. This control system
Altitude
(non-adjustable): 1800m;
is sensitive with stable operation.

Pressure of control system4.0MPa;
Generator: 24V/70A;
Remote control system It is used for
Start Motor: 24V/7.5kW;
remote control of telescopic oil cylinder of
Fuel Tank Capacity: 400L.

Optional Cummins inline, 6-cylinder,
water-cooled,
turbo-charger
and
inter-cooler with the model of 6CTAA-250.
Rated power/speed: 186kW/ 2200rpm.
Maximum torque: 1219Nm/1300rpm.
the lowerworks and support oil cylinder.

Major components of main hydraulic
system, control system, auxiliary system
and hydraulic elements are mostly of
Bosch REXROTH or Kawasaki or other
Controls
The
well-known brands.
system
is
composed
of
One independent variable displacement

pump drives the right traveling gear and
multi-controllers, displays and sensors.

the
main winch gear, another independent
remote
variable displacement pump drives the left
control termination of the moment limiter
traveling gear, luffing drum and auxiliary
adopt CAN network technology and the
winch drum, and a third independent
system is with high reliability.
variable displacement pump drives the
The display can indicate the parameters of
swing gear with closed-type (Rexroth)/
the rotation speed of the engines, amount
open-type (Kawasaki). Two gear pumps
of fuel, oil pressure, servo pressure, wind
are used for servo hydraulic system and
speed and engine operation time. It is
auxiliary hydraulic system.
also equipped with the function such as for
Main system pressure30MPa
indicating the locking of the main winch
Fuel Tank Capacity320L;
The
data
controllers,
transmissions
displays,
among
engines,
Quality Changes The World

Cooling system: Hydraulic oil radiator
Swing system
driven by independent motor.

Filter: full flow type bypass paper filter
The swing reducer driven by hydraulic

motor can freely rotate in 360
element oil filter.
Braking: closed, concealed, wet type,
Main and Auxiliary Hoisting
spring loaded and brake, and oil pressure

released spring brake;
Mechanism
Swing lock: It can lock the upperworks

The main winch drum and auxiliary winch
drum are driven by planetary gear speed
reducer. The brakes are closed wet brakes
set inside the reducer. When the lever is in
and the base of the traveling device

through
swing
oil
cylinder
during
transportation.
Swing support: The gear of swing
neutral position, the brakes are in braking

status. Pallet locking gear is provided for
reducer drives single row ball bearing.
outside winch drum with 3 circles protector
Swing speed0~2.25rpm
to enhance safe reliability of main hoisting
Luffing Gear
gear.
The luffing winch is driven by planetary
560mm
Outermost steel wire

speed
Diameter
Wire
of
Steel
Length of steel wire

for main hoisting
gear
Rated
pull
single
line
Auxiliary hoisting device
Drum diameter
Outermost
wire speed
steel
0110m/min
reducer, which is driven by hydraulic

plunger piston motor. The brakes are
closed wet brakes set inside the reducer,
24mm
which is braked by spring pressure and

released by oil pressure.
240m
Drum diameter
9.2t
560mm
0110m/min
Diameter of steel
wire
24mm

for
auxiliary
hoisting gear
180m
Rated single line

pull
9.2t
Luffing devices
Main hoisting device
Drum Diameter
420mm
Outermost steel wire

speed
Diameter
wire
of
steel
073m/min
20mm

for main hoisting
gear
171m
Rated single line pull
6.9t
Counterweight
The unitive counterweight adopts small
counterweight
combination
with
light
weights so that the requirements of the


tonnage for the crane are very low. Striking
Seat:
caution shall be adopted and swing
multilevel adjustable seats with relief
alarming light shall be installed at the tail
switch.
of the counterweight, onto which a 2.5t
Air conditioner: Cold and warm wind,
counterweight can be adopted then, can
optimized tube and blast tuyere;
provide a new operation mode after
Operation Mode: Right and left traveling
authorizing the moment limiter so as to
pedal and levers is in the front of drivers
improve the capacity of the crane. The

weight of standard counterweight is about
Suspended,
multimode
and
cab. Monitor and the accelerator pedal is

in the right front; luffing and main winch
27t (excluding additional counterweight)

levers, and start switch (ignition lock) are
the combination is as follows:

Pallet of counterweight: 3.57t1
mounted on the right armrest box at right
Left piece of counterweight: 3t3
side of seat; auxiliary winch and swing
Right piece of counterweight: 3t3
levers, air conditioner control panel, swing
Middle piece of counterweight: 2.5t2
locking key, lighter, hand throttle, auxiliary
(excluding additional counterweight)

control box panel, load moment indicator
Optional additional counterweight: the
same with the middle ones 2.5t1.
and electronic monitor are mounted at the

left side of seat.
Operators Cab
The novelty pattern sliding door of cab
Traveling Device
allows easy and safe opening and closing
The chassis is welded by structural steel
of the door; the large window, together
plates. The telescopic function of track
with head light and rearview mirror,
frame enhances the stability of chassis.
permits wider visual field. Air conditioner
The left and right track shall be extended
and mp3 player are installed. Seat, levers
by the expansion of hydraulic oil cylinder
various electric switches are all designed
fixed in the middle of the chassis so as to
according to ergonomics, which makes
widen the chassis during operation and
operation more comfortable.
guarantee the stability and draw back
Handrail: various levers, electric switches
during transportation to reduce the width.
and ignition lock are installed onto the left
During transportation of the main device,
and
removing the track frame is not required.
right
handrails
and
auxiliary
controlling cabinets. The handrails can be
Tension of track: track tensity can be
adjusted according to the adjustment of
adjusted through a jack by adding or
seat.
reducing the numbers of the gasket to


adjust
the
tensity,
which
is
more
Jib
convenient and reliable.

Track traveling: each track is driven by
the planetary gear speed reducer on
driving wheel, which is driven independent
hydraulic motor. The crawlers need no
maintenance
except
for
periodical
Truss structure: the main chord pipes are

of high strength structural steel pipes, and
the ventral tube is made of carbon steel.
Sections of jib are connected through pin
roll.
Basic jib length: 9m, consisting of jib tip
replacement of reducer gear oil.

Track traveling braking: Normally closed,
concealed, wet type, spring loading and oil
of 4.5m and jib base of 4.5m.

Jib insert: 4.5m2. It can enable jib
length and extend the operation scope.
pressure released.
Each track consists of 52 crawler pads
through pin roll connection with a width of
Longest auxiliary boom: 18m.

Longest main boom+ jib: 49m + 18m .
850mm.
Hook Block
Traveling speed: the crane may travel at
80t Hook block
two steps of speed.
50t Hook block
Low speed01.1 km/h
25t Hook block
High speed02.0 km/h
9t Hook block
Main Boom
Note: the equipments mentioned above
Truss structure: the main chord pipe is of

high
strength
structural
steel
pipes
connected through pin roll. Boom tip is of

various cross section structures.
Basic boom length 13m consisting of
are the full set of configurations. The

detailed
configurations
shall
be
in
accordance with the order.
Safety Device
Load Moment Indicator
boom tip of 6.5m and boom base of 6.5m.

There
Boom insert: it can extend boom length
and operation scope. The main chord pipe
is
an
independent
security
operating system controlled by computer

in the load moment indicator. It can
is of high strength structural steel pipe
automatically detect the weight being
connected through pin roll. The length
hoisted by the crane and the angle of the
numbers of boom inserts respectively are:
boom and indicate the rated load, actual
3m1, 6m1 and 9m4.
load, operating radius and angle of the

boom.
Longest main boom: 58m
Composition: Host machine, monitor,

angle sensor and force sensor etc.
Mode/Operation Mode
Function: instantaneously display the

rated load, actual load, operation radius,
angle and height of the working device
under the current situation of the crane.
Automatically detect the dynamic data of
the
angle
over-limitation
and
load
over-limitation and alarm immediately and
The
anti-overwinding
device,
caging
device of boom, A-frame alarming device,

expansion device of track and moment
limiter are all out of commission under the
assembling mode so as to make it easier
to assemble the crane.
Under the operation mode, all the safety
stop the operation.
Anti-overwinding Device for

Main and Auxiliary hooks
devices can be operated.
A-frame Alarming Device

Under operation mode, the system shall
alarm through buzzer and monitor in case
The limit switch and heavy punch fixed on

the upper boom/jib are used to prevent the
hook from being lifted over high. When the
hook is lifted to a certain height, the limit
switch is activated so as to make the
the A-frame was not lifted to the right

position.
Track
Expansion
Alarming
Device
buzzer on the control board alarm by both

electrical and hydraulic control and the
hook lifting operation stop automatically.
On this occasion, the hook overwinding
Under the operation mode, the system

shall alarm through buzzer and monitor in
case the track was not extend to right
position.
could be prevented.
Anti-overloosening Device for

Main and Auxiliary Hooks
Caging Device for Boom

When the elevation angle of the boom is
over 78, the buzzer shall alarm and the
It is composed of the motion trigger device
boom shall be stopped. Synchronously,
fixed inside of the drum and proximity
the lifting operation of luffing drum is out of
switch. It shall send signal when the steel
commission and only lowering operation is
wire was loosened close to the last 3
allowed. This protection function shall be
circles
controlled by both of the moment limiter
and
the
electrical
controlling
system shall automatically stop the hooks
and the two-stage control of travel switch.
and alarm through buzzer and monitor.
When the angle of the boom is less than
Commutator for Assembling
30, the buzzer shall alarm and the boom

shall be stopped. Synchronously, the

lowering operation of the luffing drum is
Hook Clamp
out of commission and only the lifting
Each kind of lifting hook is equipped with
operation is allowed. This function shall be
baffle used to prevent the hoisting wire
controlled by moment limiter
rope from coming off.
Anti-tip-back
Device
for
Boom
Acousto-optic Alarm
It can send acousto-optic alarm within 5
seconds after the engine started and
The anti-retroversion rod is made in

nested steel pipe and spring structure
fixed on the top of the lower boom, which
during swing and traveling.
Gradienter
is equipped with the function of support
Electronic gradienter can indicate the
through the spring pressure so as to
inclining angle of the upperworks on the
prevent the main boom retroversion.
monitor of the control system.
Swing Lock Device
Relief Switch
It
is
composed
of
swing
braking
When the operator is not at seat or draws
electromagnetic valve and swing lock
back the relief lever, the relief valve shall
releasing electromagnetic valve. Only to
be closed and all the operations are out of
open the swing locking electromagnetic
commission
valve first, the rotation operation can be
misoperations.
fulfilled.
Emergency Stopping Button
Drum Lock Device
so
as
to
prevent
When emergency appears, press this
Electrical controlled pallet locking device is
button to cut off the electricity and stop all
set to the main, auxiliary and luffing drums,
the operations.
which means it is essential to press the
Tricolor Load Alarming Light
winding
switch
operation
so
before
as
to
the
winding
prevent
the
misoperation caused by lever and to

guarantee the safety when the winding is
The load alarming light includes 3 colors,

which can display the instantaneous load
synchronously. Namely, the green color
means the load rate is less than 90%, the
under non-operation mode.
Boom Angle Indicator
yellow color means the load rate is

between 90% to 100% and the red color
Pendulum-type angle indicator mounted at
means the load rate is over 100%, which
the side close to the drivers cab of the
is in overload situation.
lower boom.
Monitor System
Camera: 2 PCS, respectively monitor the
winch and the situation of the back portion
for the complete appliance.
Monitor: the monitored images can be
switched over through switches.
Anti-lightening stroke protection

device
It
includes
grounding
devices
and
surge-protect device, which can prevent

the damage of the electronic components
and the hurt of the staff from lightening.
Optional Remote Monitoring

System
The functions of GPS satellite orientation,
GPRS data transmission, inquiry of the
operation of the equipments, statistic and
remote failure diagnosis are available.
Illuminator
Night lighting devices such as winch
illuminator, dipped light in front of the
drivers cab, angle adjustable high beam
and head lamp in drivers cab shall be set
so as to improve safety for construction
during night.
Rearview Mirror
The mirrors shall be respectively set at the
right side of the drivers cab and the front
handrail of the left cover.
Outline Dimensions
Main Dimensions for SCC800C Hydraulic Crawler Crane
Outline dimensions
Main body(with track frame)
Length
Width
Height
Weight
1
13.32m
3.40m
3.35m
46t
Main body(Track frame removed)

1
Length
7.65m
Width
3.31m
Height
3.07m
Weight
26.8t
Track assembly
Length
Width
Height
Weight
2
6.30m
1.00m
1.12m
9.6t
Pallet counterweight
Length
Width
Height
Weight
1
3.50m
1.20m
0.56m
3.6t
Left counterweight block

Length
Width
Height
Weight
1.2m
0.9m
0.47m
3.1t
Right counterweight block

Length
Width
Height
Weight
3
1.20m
0.90m
0.47m
3.1t
Additional counterweight
Length
Width
Height
Weight
2
1.64m
0.58m
0.41m
2.5t

Main boom base
Length
Width
Height
Weight
1
6.73m
1.63m
1.89m
1.6t
Main boom tip

Length
Width
Height
Weight
1
6.98m
1.63m
1.79m
1.85t
Boom insert 3m
Length
Width
Height
Weight
1
3.14m
1.63m
1.6m
0.4t
Boom insert 6m
Length
Width
Height
Weight
1
6.14m
1.63m
1.6m
0.8t
Boom insert 9m
Length
Width
Height
Weight
4
9.14m
1.63m
1.6m
1.1t
Jib tip
Length
Width
Height
Weight
1
4.88m
0.87m
0.77m
0.35t
Jib base
Length
Width
Height
Weight
1
4.69m
0.89m
0.77m
0.3t
10

Jib insert 4.5m(14'9")
Length
Width
Height
Weight
2
4.57m
0.87m
0.77m
0.2t
Note:
The transportation dimension of main
parts is sketch map, which was not drawn
according to the rate. The dimension in the
sketch is design value excluding package.
The weight is design value and there
may be difference caused manufacture.
11
Main Boom Combinations

Boom length
(m)
3m
6m
9m
13
16
19
22
25
28
34
37
31
40
Boom inserts
43
46
52
55
58
49
12
Main Boom Range Diagram
13
Main Boom Load Charts

Main Boom Load 1/3
Radius (m)
Boom length(m)
22
25
Unit: t
16
19
4.3
4.5
5.0
5.5
6.0
6.5
7.0
13
80.00
76.50
68.07
59.18
52.30
46.82
42.34
66.80
58.90
52.02
46.54
42.06
58.72
51.84
46.35
41.88
51.66
46.18
41.70
45.90
41.42
40.72
7.5
38.63
38.34
38.16
37.98
37.70
37.06
36.89
38.50
8.0
35.49
35.20
35.02
34.84
34.56
33.97
33.79
35.29
8.5
32.80
32.51
32.33
32.16
31.87
31.32
31.14
32.55
9.0
30.47
30.19
30.01
29.83
29.55
29.02
28.85
30.17
10.0
26.65
26.37
26.18
26.01
25.72
25.25
25.07
26.26
11.0
23.64
23.35
23.17
22.99
22.71
22.28
22.10
23.17
12.0
21.21
20.92
20.74
20.56
20.27
19.87
19.69
20.67
18.91
17.23
18.73
17.04
15.61
14.37
18.55
16.87
15.43
14.20
12.18
18.27
16.58
15.15
13.91
11.89
10.31
9.03
17.88
16.22
14.80
13.58
11.58
10.01
8.75
7.72
17.71
16.04
14.62
13.40
11.40
9.84
8.58
7.54
6.67
18.60
16.87
15.39
14.12
12.04
10.41
9.09
8.01
7.11
26.90
26.90
26.90
26.90
26.90
26.90
26.9+2.5
13.0
14.0
15.0
16.0
18.0
20.0
22.0
24.0
26.0
28.0
28
31
30.0
32.0
34.0
36.0
38.0
Counter-weight (t)
26.90
Note: The italic values in grey filling table means the operating condition under which
standard counterweight and additional counterweight are included.
14
Main Boom Load 2/3

Boom length(m)
Radius (m)
34
37
Unit: t
40
43
4.3
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
33.51
35.01
8.5
30.86
32.26
9.0
28.56
29.88
28.38
29.70
10.0
24.79
25.97
24.60
25.78
24.43
25.61
24.14
25.32
11.0
21.81
22.88
21.63
22.70
21.45
22.52
21.17
22.23
12.0
19.41
20.38
19.22
20.20
19.05
20.02
18.76
19.73
13.0
17.42
18.32
17.24
18.13
17.06
17.95
16.77
17.67
14.0
15.76
16.58
15.57
16.40
15.39
16.22
15.11
15.93
15.0
14.34
15.11
14.15
14.92
13.98
14.74
13.69
14.46
16.0
13.11
13.83
12.93
13.65
12.75
13.47
12.47
13.18
18.0
11.12
11.75
10.93
11.57
10.75
11.39
10.47
11.10
20.0
9.55
10.12
9.37
9.93
9.19
9.76
8.90
9.47
22.0
8.29
8.81
8.11
8.62
7.93
8.44
7.61
8.16
24.0
7.25
7.73
7.05
7.54
6.86
7.37
6.54
7.08
26.0
6.36
6.82
6.15
6.64
5.96
6.46
5.64
6.17
28.0
5.60
6.06
5.39
5.87
5.20
5.68
4.88
5.37
30.0
4.94
5.39
4.74
5.19
4.55
5.00
4.23
4.68
4.17
4.59
3.98
4.40
3.66
4.08
3.48
3.88
3.17
3.56
36.0
2.73
3.10
38.0
2.34
2.69
26.90
26.9+2.5
32.0
34.0
Counter-weight
t
26.90
26.9+2.5
26.90
26.9+2.5
26.90
26.9+2.5
15
Main Boom Load 3/3

Boom length(m)
Radius (m)
46
49
52
Unit: t
55
58
4.3
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
20.98
22.05
12.0
18.58
19.55
18.40
19.37
18.11
19.08
13.0
16.59
17.48
16.41
17.30
16.13
17.02
15.94
16.83
15.66
16.55
14.0
14.92
15.75
14.75
15.57
14.46
15.28
14.28
15.10
13.99
14.81
15.0
13.50
14.27
13.33
14.09
13.04
13.81
12.86
13.62
12.57
13.34
16.0
12.28
13.00
12.11
12.82
11.82
12.53
11.63
12.35
11.35
12.06
18.0
10.28
10.92
10.11
10.74
9.82
10.45
9.63
10.27
9.32
9.98
20.0
8.72
9.29
8.52
9.11
8.21
8.82
8.01
8.64
7.69
8.35
22.0
7.41
7.97
7.22
7.79
6.90
7.51
6.70
7.32
6.39
7.01
24.0
6.34
6.89
6.14
6.71
5.83
6.43
5.63
6.19
5.31
5.88
26.0
5.44
5.96
5.25
5.77
4.93
5.50
4.73
5.25
4.42
4.94
28.0
4.68
5.16
4.49
4.97
4.17
4.70
3.97
4.45
3.66
4.14
30.0
4.03
4.48
3.83
4.28
3.52
4.01
3.32
3.77
3.00
3.45
32.0
3.46
3.88
3.27
3.69
2.95
3.41
2.75
3.17
2.44
2.85
34.0
2.97
3.36
2.77
3.16
2.46
2.88
2.25
2.65
1.94
2.33
36.0
2.53
2.90
2.33
2.70
2.02
2.42
1.81
2.18
1.50
1.87
38.0
2.14
2.49
1.94
2.29
1.63
2.01
1.42
1.77
1.11
1.46
26.90
26.9+2.5
26.90
26.9+2.5
26.90
26.9+2.5
26.90
26.9+2.5
26.90
26.9+2.5
Counter-weight
t
16

NoteRated load of the crane
The rated loads in the table represent the values when slowly and smoothly hoisting a
weight on a horizontal and hardy soil surface under non-traveling hoisting working state.
The rated loads in the table were calculated under the condition that the wind speed
was 9.8m/s and according to 75% of the tilting load.
The rated load includes the weight of hook block and other comments. Actual hoisting
weight is the value of rated load in the table deducing weight of all hoisting implements
such as hoisting hook block etc. (for 80t hook block, weight1.25t, 50t hook block,
weight 0.75t, 25t hook block, weight 0.55t,9t hook block, weight 0.25t).
When installing jib or extension boom, the rated load includes weights of main and
auxiliary hook blocks and the value listed in the following table. The actual load-hoisting
capacity of the crane is the value in table deducing the weight listed in the following table
as well as weights of main and auxiliary hook blocks, but it will not work if the residual
value is below 0.8t.
Jib length (m)
Deducted weight (t)
13.5
18
Extension boom
0.75
1.0
1.3
0.2
The length of available main boom for installing jibs is 3752m.

When hoisting, the track frame of the crane must be at expansion state.
The relation between multiplying power of wire rope and maximum rated load and
weight of hook block us listed in the following table.
All values in the load table apply to 360 rotation.
3 multiplying
power
2 multiplying
power
1 multiplying
power
0.25
4 multiplying
power
9t
5 multiplying
power
0.55
6 multiplying
power
25t
7 multiplying
power
0.75
8 multiplying
power
50t
9 multiplying
power
1.25
10 multiplying
power
80t
11 multiplying
power
Hook
Block
Weight
of hook
block
t
12 multiplying
power
Maximum Rated Total Load t (USt)
80
73.3
66.7
60
53.3
46.7
40
33.3
26.7
20
13.3
6.7
47.2
40.5
33.8
27.2
20.5
13.8
7.2
20.7
14
7.4
9.0
The counterweight (26.9t+2.5t) is an optional operation mode, but not standard

operation mode. The length of main boom for the allowed additional counterweight is
31~58m.
17
Jib Combinations
Jib length
(m)
Jib insert
13.
18
4.5m
18
Jib Range Diagram
19
Fixed Jib Load Charts

Unit: t
Boom length(m)
37m
Jib length(m)
Jib angle
Boom angle
9m
15
13.5m
30
15
18m
30
15
30
58
4.78
5.16
4.51
4.87
4.06
4.40
3.60
3.60
3.48
3.50
2.40
2.40
59
5.00
5.39
4.71
5.00
4.25
4.60
3.60
3.60
3.50
3.50
2.40
2.40
60
5.24
5.64
4.91
5.00
4.46
4.82
3.60
3.60
3.50
3.50
2.40
2.40
61
5.49
5.90
5.00
5.00
4.67
5.04
3.60
3.60
3.50
3.50
2.40
2.40
62
5.76
6.00
5.00
5.00
4.90
5.27
3.60
3.60
3.50
3.50
2.40
2.40
63
6.00
6.00
5.00
5.00
5.15
5.53
3.60
3.60
3.50
3.50
2.40
2.40
64
6.00
6.00
5.00
5.00
5.41
5.81
3.60
3.60
3.50
3.50
2.40
2.40
65
6.00
6.00
5.00
5.00
5.70
6.00
3.60
3.60
3.50
3.50
2.40
2.40
66
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
67
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
68
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
69
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
70
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
71
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
72
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
73
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
74
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
75
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
76
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
77
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
78
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
Counterweight
t
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
standard counterweight and additional counterweight are included
20

Unit: t
Boom length(m)
40m
Jib length(m)
Jib angle
Boom angle
9m
15
13.5m
30
15
18m
30
15
30
58
4.13
4.49
3.91
4.25
3.52
3.84
3.26
3.56
3.01
3.30
2.40
2.40
59
4.34
4.71
4.10
4.45
3.70
4.03
3.41
3.60
3.17
3.47
2.40
2.40
60
4.57
4.95
4.30
4.66
3.89
4.23
3.50
3.60
3.34
3.50
2.40
2.40
61
4.81
5.20
4.51
4.88
4.10
4.45
3.60
3.60
3.50
3.50
2.40
2.40
62
5.06
5.46
4.74
5.00
4.32
4.68
3.60
3.60
3.50
3.50
2.40
2.40
63
5.34
5.75
4.98
5.00
4.56
4.93
3.60
3.60
3.50
3.50
2.40
2.40
64
5.63
6.00
5.00
5.00
4.71
5.09
3.60
3.60
3.50
3.50
2.40
2.40
65
5.95
6.00
5.00
5.00
5.09
5.48
3.60
3.60
3.50
3.50
2.40
2.40
66
6.00
6.00
5.00
5.00
5.38
5.78
3.60
3.60
3.50
3.50
2.40
2.40
67
6.00
6.00
5.00
5.00
5.70
6.00
3.60
3.60
3.50
3.50
2.40
2.40
68
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
69
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
70
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
71
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
72
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
73
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
74
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
75
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
76
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
77
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
78
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
Counterweight
t
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
+2.5
+2.5
+2.5
+2.5
+2.5
+2.5
21

Unit: t
Boom length(m)
43m
Jib length(m)
Jib angle
Boom angle
9m
15
13.5m
30
15
18m
30
15
30
58
3.59
3.93
3.40
3.73
3.05
3.36
2.83
3.12
2.60
2.88
2.37
2.40
59
3.78
4.13
3.58
3.91
3.22
3.54
2.98
3.28
2.76
3.05
2.40
2.40
60
4.00
4.36
3.77
4.11
3.41
3.73
3.14
3.44
2.92
3.21
2.40
2.40
61
4.22
4.59
3.97
4.32
3.61
3.94
3.32
3.60
3.18
3.48
2.40
2.40
62
4.47
4.85
4.19
4.55
3.82
4.16
3.50
3.60
3.29
3.50
2.40
2.40
63
4.73
5.12
4.42
4.79
4.05
4.40
3.60
3.60
3.49
3.50
2.40
2.40
64
5.01
5.41
4.64
5.00
4.29
4.65
3.60
3.60
3.50
3.50
2.40
2.40
65
5.31
5.72
4.94
5.00
4.55
4.92
3.60
3.60
3.50
3.50
2.40
2.40
66
5.64
6.00
5.00
5.00
4.84
5.22
3.60
3.60
3.50
3.50
2.40
2.40
67
6.00
6.00
5.00
5.00
5.14
5.54
3.60
3.60
3.50
3.50
2.40
2.40
68
6.00
6.00
5.00
5.00
5.47
5.88
3.60
3.60
3.50
3.50
2.40
2.40
69
6.00
6.00
5.00
5.00
5.83
6.00
3.60
3.60
3.50
3.50
2.40
2.40
70
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
71
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
72
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
73
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
74
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
75
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
76
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
77
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
78
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
Counterweight
t
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
22

Unit: t
Boom length(m)
46m
Jib length(m)
Jib angle
Boom angle
9m
15
13.5m
30
15
18m
30
15
30
58
3.04
3.36
2.88
3.19
2.58
2.87
2.39
2.67
2.19
2.46
1.99
2.24
59
3.23
3.56
3.06
3.38
2.74
3.04
2.54
2.82
2.34
2.62
2.12
2.38
60
3.43
3.77
3.24
3.57
2.92
3.23
2.70
2.99
2.50
2.78
2.26
2.40
61
3.65
4.00
3.44
3.77
3.11
3.43
2.87
3.17
2.67
2.96
2.38
2.40
62
3.88
4.24
3.65
3.99
3.32
3.65
3.04
3.34
2.85
3.15
2.40
2.40
63
4.13
4.50
3.87
4.22
3.53
3.86
3.23
3.54
3.04
3.35
2.40
2.40
64
4.39
4.77
4.11
4.47
3.77
4.11
3.43
3.60
3.25
3.50
2.40
2.40
65
4.68
5.07
4.36
4.73
4.02
4.38
3.60
3.60
3.47
3.50
2.40
2.40
66
5.00
5.41
4.64
5.00
4.29
4.66
3.60
3.60
3.50
3.50
2.40
2.40
67
5.34
5.76
4.94
5.00
4.59
4.97
3.60
3.60
3.50
3.50
2.40
2.40
68
5.70
6.00
5.00
5.00
4.91
5.30
3.60
3.60
3.50
3.50
2.40
2.40
69
6.00
6.00
5.00
5.00
5.25
5.66
3.60
3.60
3.50
3.50
2.40
2.40
70
6.00
6.00
5.00
5.00
5.63
6.00
3.60
3.60
3.50
3.50
2.40
2.40
71
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
72
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
73
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
74
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
75
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
76
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
77
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
78
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
Counterweight
t
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
26.9
+2.5
+2.5
+2.5
+2.5
+2.5
+2.5
23

Unit: t
Boom length(m)
49m
Jib length(m)
Jib angle
Boom angle
9m
15
13.5m
30
15
18m
30
15
30
58
2.56
2.87
2.43
2.73
2.18
2.46
2.02
2.29
1.83
2.09
1.67
1.91
59
2.74
3.06
2.60
2.90
2.34
2.63
2.17
2.44
1.98
2.24
1.79
2.04
60
2.93
3.25
2.78
3.09
2.51
2.81
2.32
2.60
2.13
2.40
1.93
2.18
61
3.14
3.47
2.96
3.28
2.69
2.99
2.48
2.77
2.29
2.57
2.07
2.33
62
3.36
3.70
3.17
3.50
2.80
3.11
2.65
2.94
2.47
2.76
2.22
2.40
63
3.60
3.95
3.30
3.64
3.09
3.41
2.84
3.14
2.66
2.95
2.38
2.40
64
3.85
4.21
3.61
3.96
3.32
3.65
3.03
3.34
2.86
3.16
2.40
2.40
65
4.13
4.51
3.86
4.22
3.56
3.90
3.24
3.56
3.07
3.38
2.40
2.40
66
4.43
4.82
4.12
4.49
3.72
4.07
3.47
3.60
3.31
3.50
2.40
2.40
67
4.75
5.15
4.41
4.79
4.11
4.47
3.60
3.60
3.50
3.50
2.40
2.40
68
5.11
5.53
4.72
5.00
4.41
4.79
3.60
3.60
3.50
3.50
2.40
2.40
69
5.49
5.92
5.00
5.00
4.75
5.14
3.60
3.60
3.50
3.50
2.40
2.40
70
5.91
6.00
5.00
5.00
5.11
5.51
3.60
3.60
3.50
3.50
2.40
2.40
71
6.00
6.00
5.00
5.00
5.52
5.94
3.60
3.60
3.50
3.50
2.40
2.40
72
6.00
6.00
5.00
5.00
5.96
6.00
3.60
3.60
3.50
3.50
2.40
2.40
73
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
74
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
75
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
76
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
77
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
78
6.00
6.00
5.00
5.00
6.00
6.00
3.60
3.60
3.50
3.50
2.40
2.40
Counterweight
t
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
24

Unit: t
52m
Boom length(m)
9m
Jib length(m)
Jib angle
13.5m
15
Boom angle
30
15
30
58
2.05
2.35
1.94
2.22
1.74
2.01
1.62
1.88
59
2.19
2.49
2.08
2.37
1.90
2.18
1.76
2.02
60
2.34
2.65
2.22
2.52
2.06
2.34
1.91
2.18
61
2.51
2.83
2.37
2.68
2.24
2.53
2.06
2.33
62
2.69
3.02
2.54
2.85
2.42
2.72
2.23
2.51
63
2.88
3.22
2.64
2.96
2.63
2.94
2.41
2.70
64
3.08
3.43
2.89
3.22
2.84
3.16
2.60
2.90
65
3.30
3.66
3.09
3.43
3.08
3.41
2.88
3.18
66
3.54
3.91
3.30
3.65
3.33
3.67
3.02
3.33
67
3.80
4.18
3.53
3.89
3.60
3.95
3.26
3.58
68
4.09
4.49
3.78
4.00
3.90
4.26
3.51
3.60
69
4.39
4.80
4.00
4.00
4.22
4.59
3.60
3.60
70
4.73
4.80
4.00
4.00
4.50
4.80
3.60
3.60
71
4.80
4.80
4.00
4.00
4.66
4.80
3.60
3.60
72
4.80
4.80
4.00
4.00
4.80
4.80
3.60
3.60
73
4.80
4.80
4.00
4.00
4.80
4.80
3.60
3.60
74
4.80
4.80
4.00
4.00
4.80
4.80
3.60
3.60
75
4.80
4.80
4.00
4.00
4.80
4.80
3.60
3.60
76
4.80
4.80
4.00
4.00
4.80
4.80
3.60
3.60
77
4.80
4.80
4.00
4.00
4.80
4.80
3.60
3.60
78
4.80
4.80
4.00
4.00
4.80
4.80
3.60
3.60
Counterweight
t
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
26.9
26.9
+2.5
25

Crawler Crane Sany Type SCC 800 C

Uploaded by

Copyright:

Available Formats

Crawler Crane Sany Type SCC 800 C

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Crawler Crane Sany Type SCC 800 C

Uploaded by

Copyright:

Available Formats

SCC800C Hydraulic Crawler Crane

and the auxiliary winch and locking of the

locking of the swing.

Cummins inline, 6-cylinder, water-cooled,

The main, auxiliary and swing rotating

Emission standard: Tier 3

brakes shall be the closed wet brake set in

Air filterTwin-stage filter composed of air

which shall be automatically compensated

Maximum torque: 1268Nm/1400rpm;

the reducer. When the lever is in the

Rated Power/Speed: 183kW/ 2000rpm;

Hydraulic precursor control is adopted.

and no need to adjust. This control system

is sensitive with stable operation.

Remote control system It is used for

Start Motor: 24V/7.5kW;

remote control of telescopic oil cylinder of

Fuel Tank Capacity: 400L.

the lowerworks and support oil cylinder.

One independent variable displacement

multi-controllers, displays and sensors.

main winch gear, another independent

variable displacement pump drives the left

control termination of the moment limiter

traveling gear, luffing drum and auxiliary

adopt CAN network technology and the

winch drum, and a third independent

system is with high reliability.

variable displacement pump drives the

The display can indicate the parameters of

swing gear with closed-type (Rexroth)/

the rotation speed of the engines, amount

open-type (Kawasaki). Two gear pumps

of fuel, oil pressure, servo pressure, wind

are used for servo hydraulic system and

speed and engine operation time. It is

auxiliary hydraulic system.

also equipped with the function such as for

Main system pressure30MPa

indicating the locking of the main winch

Fuel Tank Capacity320L;

Quality Changes The World

SCC800C Hydraulic Crawler Crane

driven by independent motor.

The swing reducer driven by hydraulic

element oil filter.

Braking: closed, concealed, wet type,

Main and Auxiliary Hoisting

spring loaded and brake, and oil pressure

Swing lock: It can lock the upperworks

and the base of the traveling device

neutral position, the brakes are in braking

reducer drives single row ball bearing.

outside winch drum with 3 circles protector

to enhance safe reliability of main hoisting

Outermost steel wire

Length of steel wire