TDS Jotashield Heritage HB Fine GB English Decorative

Technical Data Sheet
VValidationDate).
AE - EG - OM - SA
8900
8900
1
Other
Jotashield Heritage HB Fine

Product description
Type
This product is a superior quality, exterior, water based, high build textured paint. Based on modified acrylic
emulsion.
Features and benefits

Specially designed to withstand the harsh middle east climate and weather conditions. Can be used to decorate
and protect the exterior surfaces, giving ancient look. Jotashield Heritage glaze can be applied to give a
weathered ancient look.
Recommended use
Ideal for decorating and protecting exterior surfaces.
Substrate
Cement plaster, Concrete, block work, gypsum board and rendered surfaces.
Product data
Colours
Refer to Jotashield exterior colour card.
Solids
63
Specific gravity
VOC
volume%
Theoretical
1,8
kg/l
Theoretical Only for whites
g/l
ISO 11890 EU
Application data
Remarks
Highly recommended that this product is applied by a skilled and a professional painter.
The product can be applied by

Spatula, Trowel (Made of stainless steel).
Conditions during application

The temperature of the substrate should be minimum 10 C and at least 3 C above the dew point of the air,
measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying.
Date of issue:
14.09.2014.
by Jotun Group
Page: 1/3
This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) for this product.
For your nearest local Jotun office, please visit our website at www.jotun.com.

Recommended film thickness per coat

Film thickness will vary and is calculated as average.
Spreading rate per coat

Theoretical
Typical
1,5 m/l
Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature,
wastage during painting etc. The average spreading rate per coat can be confirmed at site by a trial application.
Thinner
Water
Dilution
Maximum 10 %
Cleaning of painting tools

Water
Drying times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will
be affected correspondingly.
1.Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the
total thickness of previous coats applied.
3.The surface should be dry and free from any contamination prior to application of the subsequent coat.
Relative Humidity (RH)
Substrate temperature
Surface (touch) dry
Hard dry
Dried to over coat, minimum
50 %
10 C
12 h
24 h
24 h
50 %
23 C
3h
5h
5h
50 %
40 C
1h
3h
3h
Directions for use

Surface preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of foam release
agents must be removed. A light sanding with suitable abrasive material is recommended before application.
Any resulting dust/loose particles must be removed.
Recommended paint system

Primer
Jotashield Penetrating Primer : 1 Coat
Date of issue:
14.09.2014.
by Jotun Group
Page: 2/3


Topcoat
Jotashield Heritage HB Fine : 1 - 2 Coat(s)
Other paint systems

Jotashield
Jotashield
Jotashield
Jotashield
Penetrating Primer : 1 Coat

Heritage HB Fine : 1 Coat
Colourlast Silk : 1 Coat
Heritage Glaze : 1 Coat
Remarks
Other systems may be specified, depending on area of use.
Masking tape has to be removed immediately after application of the topcoat.
Contents of packaging with different batch numbers must be mixed together before use.
Please refer to the Decorative Sales Department for technical advice.
Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.
Health and safety

Please observe the environmental and precautionary notices displayed on the container.
A Material Safety Data Sheet for the product has been issued.
Detailed information regarding health- and safety risks and precautions for the use of this product is specified in
the product's Safety Data Sheet.
First-aid measures, refer to section 4.
Handling and storage, refer to section 7.
Transport information, refer to section 14.
Regulatory information, refer to section 15.
Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.
Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.
If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.
Date of issue:
14.09.2014.
by Jotun Group
Page: 3/3


TDS Jotashield Heritage HB Fine GB English Decorative

Uploaded by

Copyright:

Available Formats

TDS Jotashield Heritage HB Fine GB English Decorative

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TDS Jotashield Heritage HB Fine GB English Decorative

Uploaded by

Copyright:

Available Formats

Technical Data Sheet

Jotashield Heritage HB Fine

Features and benefits

Refer to Jotashield exterior colour card.

Theoretical Only for whites

The product can be applied by

Conditions during application

This Technical Data Sheet supersedes those previously issued.

Technical Data Sheet

Recommended film thickness per coat

Spreading rate per coat

Cleaning of painting tools

Directions for use

Recommended paint system

This Technical Data Sheet supersedes those previously issued.

Technical Data Sheet

Other paint systems

Penetrating Primer : 1 Coat

Health and safety

This Technical Data Sheet supersedes those previously issued.

You might also like