Up to 25 l/min
Up to 350 bar
FUNCTION
2/2 Solenoid Directional Valve
Poppet Type, Direct Acting
Normally Closed
Metric Cartridge 350 bar
WSM06020W-61
FEATURES
zz High performance version for high pressures and long service life
zz External surfaces zinc-plated
zz Hardened and ground valve components to ensure minimal wear and extended
service life
zz Coil seals protect the solenoid system
zz Wide variety of connectors available
zz Excellent switching performance by high power HYDAC solenoid
zz Low pressure drop due to CFD optimized flow path
SPECIFICATIONS
Operating pressure:
Nominal flow:
Internal leakage:
Media operating temperature range:
Ambient temperature range:
Operating fluid:
Viscosity range:
Filtration:
MTTFd:
Installation:
Materials:
E 5.949.3.2/09.13
Cavity:
Weight:
376
The WSM06020W-61 is the high
performance version of the standard
WSM06020W-01. Owing to its larger coil
and modified design, the valve switches
up to 350 bar and permits a flow rate of
25 l/min.
When the solenoid coil is de-energized,
the valve blocks flow in both directions.
When energized the valve allows flow in
both directions.
Caution: No orifice is permitted just
before port 1.
Electrical data:
Type of voltage:
Current draw (at 20 C):
Voltage tolerance:
Coil duty rating:
Response time:
Coil type:
max. 350 bar
max. 25 l/min
Leakage-free
(max. 5 drops 0,25 cm/min at 350 bar)
min. -20 C to max. +100 C
min. -20 C to max. +60 C
Hydraulic oil to DIN 51524 Part 1 and 2
min. 10 mm/s to max. 420 mm/s
Class 21/19/16 according to ISO 4406 or
cleaner
150 years (see "Conditions and
instructions for valves" in brochure 5.300)
No orientation restrictions
Valve body:
high tensile steel
Poppet:
hardened and
ground steel
Seals:
NBR (standard)
FKM (optional, media
temperature range
-20 C to 120 C)
Back-up rings: PTFE
Coil:
steel / polyamide
06020
Complete valve: 0.42 kg
Coil:
0.23 kg
DC solenoid, AC voltage is rectified
using a bridge rectifier built into the coil
2.22 A at 12 V DC
1.13 A at 24 V DC
15% of the nominal voltage
Continuous up to max. 115%
of the nominal voltage at
60 C ambient temperature
Energized:
approx. 30 ms
De-energized: approx. 40 ms
Coil ...-50-1836
MODEL CODE
DIMENSIONS
WSM06020W 61 M C N 24 DG
Manual override, with
HNBR-rubber cap
After loosening knurled
nut, coil can be rotated through
360 and removed.
Torque
4+1 Nm
hex. SW24
torque
25+5Nm
Basic model
Directional poppet valve, metric
Type
61
= standard
Manual override
No details = without manual override
M
= manual override
Body and ports*
C
= cartridge
Seals
N
= NBR (standard)
F
= FPM (optional)
Coil voltage
DC voltages
12
= 12 V DC
24
= 24 V DC
AC voltages (bridge rectifier built into the coil)
115 = 115 V AC
230 = 230 V AC
Other voltages on request
Coil connectors (type 50-1836)
DC: DG = DIN connector to EN 175301-803
DK = KOSTAL threaded connection M27x1
DL = 2 flying leads, 457 mm long, 0.75 mm
DN = Deutsch connector, 2-pole, axial
DT = AMP Junior Timer, 2-pole, radial
AC: AG = DIN connector to EN 175301-803
Other connectors on request
Standard models
Model code
Part No.
WSM06020W-61-C-N-24DG
3531890
WSM06020W-61-C-N-230AG
3531891
Other models on request
*Standard in-line bodies
millimeter (inch)
subject to technical modifications
Code
Part No.
Material
Ports
R06020-01X-01
275266
Steel, zinc-plated
G 3/8
Other line bodies on request
Seal kits
CAVITY
06020
Code
Part No.
SEAL KIT 06020-NBR
3119017
SEAL KIT 06020-FKM
3262477
PERFORMANCE
Pressure drop
Measured at = 34 mm/s, Toil = 46 C
Form tools
Tool
Countersink (shank MK3)
Reamer (shank MK2)
Part No.
170033
1000768
Note
millimeter (inch)
subject to technical modifications
The information in this brochure relates to the
operating conditions and applications described.
For applications or operating conditions not
described, please contact the relevant
technical department.
Subject to technical modifications.
HYDAC Fluidtechnik GmbH
Justus-von-Liebig-Str.
D-66280 Sulzbach/Saar
Tel: 0 68 97 /509-01
Fax: 0 68 97 /509-598
E-Mail:
[email protected]E 5.949.3.2/09.13
Flow rate
377
