TML Pam E-8501B

PRODUCT GUIDE

2014

STRAIN GAUGES

STRAIN GAUGE TRANSDUCERS

MEASURING INSTRUMENTS

AUTOMOTIVE MEASURING SYSTEM

Vehicle powertrain/Driving stability

SPECIAL PURPOSE MEASUREMENTS

MEASUREMENT SOFTWARE Visual LOG

TML Strain Gauges with a Proven Perfomance Record

Advances in technology have led to construction of new buildings that are more sohphisticated
and complex than any that have come before.
This trend has made strain measurement an even more critical
part of ensuring structural integrity and safety.
TML is an industry leader in strain gauges. Our products enjoy an outstanding reputation both in
Japan and abroad, where they meet the high-level needs of customers ranging
from research facilities to civil enginering and construction companies.
We have also developed a wide variety of strain measurement accessory products
to complement our strain gauges.
At TML you can count on field-proven products that meet the industry's highest standards
for quality, accuracy and performance.

TML is
accredited in
FORCE field.

0090
Tokyo Sokki Kenkyujo Co., Ltd. (TML) is accredited by Japan
Calibration Service System (JCSS), conformed to international
standards JIS Q 17025 (ISO/IEC 17025) under the laboratory
accreditation body ISO/IEC 17011. International Accreditation Japan
(IA Japan) plays as the accreditation body of JCSS and is a signatory
to MRA of Asia Pacific Laboratory Accreditation Cooperation (APLAC)
as well as International Laboratory Accreditation Cooperation (ILAC).
Our Kiryu factory is certified as a JCSS-accredited laboratory working
in compliance with an international Mutural Recognition Arrangement
(MRA). The accreditation number of the Kiryu Factory is 0090.

TML Calibration Service

Offers calibration service and support for your measuring instruments
Maintaining strict calibration for various measuring instruments to be used is essential. We offer
calibration service to certify that the instruments are traceable to National standards.

Issue of calibration certificate with logo of MRA/JCSS for force transducers

There are JCSS calibration and general calibration according to TML in-house regulations for force transducers (load cells).
The JCSS calibration for universal load cells is only for either tension or compression. In the general calibration, both tension
and compression are calibrated. The JCSS calibration is only for combination of a load cell and measuring instruments.

TML 10MN force calibration machine calibrated directly by National Institute of Advanced Industrial Science and
Technology (AIST).
Combined calibration with other maker's products
Calibration or traceability certificates for combined devices.
N.B. Calibration for other maker's products only is out of service.

A certificate for calibration of up to 10 force transducers with the same indicator can be issued.
Measurement management in accordance with ISO9001
EMC (Electromagnetic Compatibility) calibration for TML instruments
For the calibrated instruments, the following certificates are issued on request:
[JCSS Calibration Certificate/TML General Calibration Certificate] or [Short-form Certificate]
to certify calibration and traceability for individual products
[Detailed Calibration Certificate] including calibration data for all devices used for calibration
[Certificate of Traceability] showing that the devices used for calibration are traceable to National Standards or
public calibration laboratories.
[Certificate of Combined Calibraiton] for combination with our product or other maker's products

JCSS Calibration Certificate

for combined Load Cell and instruments

TML General Certificate

of Calibration

TML Short-form Certificate

of Calibration

TML Combined Certificate

of Calibration

TML Certificate of Traceability

Gauge
Gauge Series
Series

Integral Lead
Strain Gauge
LW

Gauge
Gauge Pattern
Pattern
(example)
(example)

Description
Description

FLA-3-11-3LT

This gauge is general purpose F, PF and P series

gauge with pre-attached lead wires of 1, 3 or 5
meters in length for easy connection to a strainmeter.
Pre-attachment among 2-wire parallel in 1-, 3-, and
5-meter long is available. Also, 3-wire parallel in 3and 5-meter long are provided.

FLA-1-11-1L

This gauge is designed to eliminate the need for

moisture-proofing-coating, which sometimes makes
troublesome in field test. The gauge has vinyl
lead wire and whole area of the gauge and junction
of lead wire are fully overcoated with transparent
flexible epoxy resin.

Foil Strain Gauge

WF

Operational
Operational

Gauge
Gauge Length
Length Temperature
Temperature
(mm)
(mm)
Range
Range (C)
(C)

Remarks
Remarks

0.2~30

20~+80

Single/ 2- / 3element

3, 6

0~+80

Single/ 2-/ 3element

WFRA-3-11-1L

Temperatureintegrated
Strain Gauge
FLA-T/QFLA-T

Foil Strain Gauge

F

Cu-Ni
Cu
FLA-2T-11-3LT

FLA-5-11
FRS-3-11
For residual stress
measurement

Foil Strain Gauge

UF
UFLA-1-11

Magnetic field
Strain Gauge
MF

MFLA-5-350-1LS

PFLR-30-11
Concrete surface
Foil Strain Gauge
PF

Concrete surface
Polyester
Strain Gauge P

This is TML's original strain gauge including Tthermocouple. One core of three-core parallel lead
wire of the strain gauge is made of Cu-Ni wire, while
other two cores are made of ordinary Cu wire. A Tthermocouple is composed of the Cu-Ni wire and one
of the Cu wire. Strain measurement with quarter bridge
3-wire method and accurate temperature measurement
are available using TML's Data Logger.
This gauge is produced from specially controlled
alloy foil. The grid is precision-etched and utilizes
an extremely thin epoxy backing. Gauge length as
short as 0.2mm or stress concentration measurement
gauge is also available in this series.

The operational temperature range of this gauge

series extends to 150C. The gauge is temperaturecompensated for mild steel, stainless steel and
aluminium. The gauge backing is color-coded
according to the temperature compensated material
type in the same method as for the F. The backing is
thin and flexible, thus allowing easy adhesion on curved
surfaces to provide superb performance in measuring
resistance change and thermal output.

FLA-T:
20~+80
1~5

QFLA-T:
20~+200

Single
element

0.2~30

20~+80

Single/ 2-/ 3element

0.2~5

20~+150

Single/ 2-/ 3element

This gauge is intended for strain measurement

in the magnetic field. Sensing material and grid Single 2, 5, 60 Single 20~+80
configuration make the gauge less sensitive to the
Single/ 2-/ 3influence of alternating field. This gauge is supplied
2-/3-element : 2-/3-element :
element
with integral twisted lead wires. 2- and 3-element
20~+200
2
gauges are usable in high temperature up to +200C.

This is a foil strain gauge having the same transparent

plastic backing as that of P series gauge. Electrical
insulatioin is excellent, and installation is very easy. It
is especially recommendable for the measurement
on mortar.

10~30

20~+80

Single/ 2-/ 3element

This gauge is a standard wire strain gauge utilizing

a transparent plastic backing impregnated with a
polyester resin. Gauge length is available in 3 steps
from 60~120mm, so it is suited for measurement of
concrete strain.

60~120

20~+80

Single/ 2-/ 3element

This gauge is designed for successful strain

measurement on the concrete surface. It has a thin
stainless steel backing which prevents penetration
of moisture from the reverse side. It retains good
electrical insulatioin to the concrete surface.

30, 60

20~+80

Single
element

60, 120

20~+60

PL-60-11

Concrete surface
Metal-backing
Strain Gauge
FLM/WFLM

Concrete embedment Polyester

Mold Strain Gauge
PM

FLM-60-11
This gauge is designed for the measurement of
interior strain in concrete under loading test by simply
embedding the gauge.

Single
element

Gauge Pattern
Pattern
Gauge
(example)
(example)

Gauge
Gauge Series
Series

Concrete embedment Mold Strain

Gauge PMF

Description
Description
This gauge has been exclusively designed for
measuring interior strain in concrete or mortar
under loading test. It employs super engineering
plastics capable of superior water proofing
characteristics. Temperature sensor integrated
model PMFL-T is available for measurement of both
strain and temperature.

PMFL
PMFL-T

This gauge is embedded in asphalts and used

for testing in loading application such as rolling
compaction. The material of the backing is a super
engineering plastics with water and heat resitance.
The gauge withstand a high temperature up to
200C in placement of asphalt.

Asphalt embedment Strain Gauge

PMFLS
PMFLS

The KM series strain transducers are designed

to measure strain in materials such as concrete,
synthetic resin which undergo a transition from
a compliant state to a hardened state. A builtin thermocouple sensor models enable actual
temperature measurement in addition to strain
measurement. Adding to the above embedment
use, surface strain measurement on concrete or
H-beam steel is also available

Asphalt embedment
Strain Transducer
KM-100HAS

This strain transducer consists of flanges at which

reinforcing bars are mounted for a good fixation in
asphalt pavement materials, a thin spring element
connected to the flanges, and metallic pipe and
fluoroplastic tape to protect the spring element.
This transducer has a heat-resistive and waterproof
construction. The asphalt strains are converted
into electrical signals and can be read out with a
strainmeter.

Wood
Strain Gauge
PFLW/PLW

TML

Concrete surface
and/or embedment
Strain Transducer
KM

30

YFLA-2

Composite
Strain Gauge
BF

UBFLA-03

BFLA-2

Remarks
Remarks

50, 60

20~+60

Single
element

60

20~+60

Single
element

31~200

20~+180

Strain :
Full bridge
Temperature :
Quarter bridge
3-wire

Strain :
Full bridge
Temperature :
Quarter bridge
3-wire

100

20~+180

30, 60

20~+80

These gauges feature a special plastic carrier base

capable of withstanding extreme elongation without
creeping or cracking. The YEF series is for 10~15%
elongation, and YF for 15~20% with high accuracy.
These gauges must be bonded with CN or CN-Y
adhesive. The YEF is also suited for measurement
of repeatedly applied strain in elastic range.

2~20

20~+80

This gauge is designed for measurement on

composite materialls. It has a specially designed
grid configuration to reduce the tightening effect
of the gauge to the specimen. Developing soft
carrier backing, this gauge features advanced
characteristics of thermal cycle examination and
gauge creep.

0.3, 1

Static use:
30~+120
Dynamic use:
30~+150

2, 5

20~+200

Single/ 2-/ 3element

This gauge is designed for measuring the stress

in optional direction in a plane stress field. This
gauge can detect the stress in gauge axial
direction regardless of shearing strain. This gauge
is available for mild steel, stainless steel SUS304
and aluminium.

20~+200

This gauge is a foil strain gauge which is desgined

for materials with a low elastic modulus such as
plastics. It has a special configuration to minimize
the effect of gauge installation. Self temperature
compensation for thermal expansion coefficient of
50 and 70x10-6/C is available.

3, 6

20~+80

Single/ 2-/ 3element

This gauge has a thin metal backing for long term

measurement on woods, not affected by moisture
enclosed in wood. The gauge is bonded with PS
adhesive.

PFLW-30-11

Post-Yield
Strain Gauge
YEF/YF

Composite
Strain Gauge
UBF

Operational
Operational
Gauge Length
Length Temperature
Gauge
Temperature
(mm)
(mm)
Range (C)
(C)
Range

This is a foil strain gauge intended for the measurement of fibre reinforced plastics. It utilizes polyimide backing and special grid configuration, which
allow a good performance in strain measurement
up to +200C.

Single
element

Single/ 2-/ 3element

Single
element

BFRA-2

Stress Gauge
SF
SFA-285

Low Elastic
Strain Gauge
GF

GFLA-3

GFRA-3

Gauge Series

Gauge Pattern
(example)

Operational

Gauge Length Temperature

(mm)
Range (C)

Description
This gauge has a polyimide-amide carrier backing
for wide use in temperature range from cryogenic
condition up to 200C.

High/Low temperature Strain Gauge

CEF

Cryogenic temperature
Strain Gauge
CF

This is an epoxy backing foil strain gauge designed

for measurement under cryogenic conditions. The
specially selected and heat-treated sensing foil
of this gauge shows very small zero shift under
cryogenic temperature compared with conventional
strain gauge.

High Temperature
Strain Gauge QF

T his is a foil strain gauge having polyimide

backing which exhibits excellent performance
at high temperature. Stress concentration
measurement gauge or shear stress measurement
gauge is also available in this series.

QFLA-5-11

Remarks

1, 3, 6

269~+200

Single
element

1~6

269~ +80

Single/ 2-/ 3element

0.2~6

20~+200

Single/ 2-/ 3element

1~6

20~+300

Single/ 2-/ 3element

QFRA-1-11
This is a foil strain gauge having polyimide
backing and special grid configuration designed
on the basis of many tests and calculations.
The strain sensing element is a Nickel-Chrome
foil, so this gauge is successfuly used for high
temperature measurement

High Temperature
Strain Gauge ZF

ZFLA-1-11

High Temperature
Strain Gauge EF

EFLK-02-11

EFRA-05-11

This gauge has polyimide backing and is designed

very small for use in measurement of printed
circuit boards or surface mounted devices which
are getting smaller and smaller. The maximum
operational temperature range of single element
gauge is 300C, which is different from that of two
or three element gauges.
This gauge is designed for fatigue test in high
stress level such as composite materials. It
satisfies the fatigue life over 10 million times at a
strain level of 3000x106. It is suited to loading
tests of materials under repeated strains.

High Endurance
Strain Gauge
DSF

Single element Single element

0.2
196~ +300

Single/ 2-/ 3element

2- /3- element
0.5

2- /3- element
196~ +200

2, 5

60~+200

Single
element

196~ +300

Single
element

DSFLA-5-350
This gauge is made of 0.08mm thick stainless
steel carrier base and a high temperature foil
strain gauge usable up to 300C. It is installed by
spot welding.

Weldable
Strain Gauge
AW
AW-6-350-11-01LT

Weldable
Strain Gauge
AWC/AWCH

AWC-8B-11-3LT

AWCH-2-11-MI-2L-05LQ
Weldable
Strain Gauge
AWM/AWMD
AWH/AWHU

Bolt Strain Gauge

BTM

AWHU-5
AWHU-8

gauge lead
hole drilled

bolt specimen
adhesive filled
BTM embedded

These gauges have hermetically sealed stainless

steel strain tube and mounted by spot welding.
Neither coating nor wiring is needed. Suitable for
long term measurement in harsh environments.
AWC-8B is of quarter bridge 3-wire system, while
AWC-2B and AWCH-2 are applicable to our
developed 1-gauge 4-wire strain measurement
method.
These gauges have a metal carrier
backing such as stainless steel and
AWM-8
designed to be spot-welded to the
test specimen.
AWMD-5/-8

2, 8

AWC-2B/-8B
20~+100
AWCH-2
30~+200

AWH-4/-8

4, 8

AWHU-5/-8

5, 8

-196~+300
-196~+800
-196~+600
-196~+650
-196~+800

1, 6

10~+80

This gauge is intended for measuring a tensile

force of bolt. A hole having 2mm diameter is
drilled at the center of a bolt and the gauge is
embedded to bond with A-2 adhesive. This
method has the advantage where an ordinary
strain gauge cannot be installed on the bolt
surface.

8
5, 8

Single
element

Static/Dynamic
Dynamic
Static
Dynamic
Static/Dynamic

Single
element

Gauge Pattern
(example)

Gauge Series

Operational
Gauge Length Temperature
(mm)
Range (C)

Description
The bolt axial force can be easily measured by
merely sticking the exclusive terminal on the head of
a hexagonal bolt and setting the wrench on the bolt
head. There is no need for attaching or detaching
the leadwires when tightening the bolt.

Bolt axial force

measurement
wrench BTMP

Remarks

For details, contact TML or your

local representatives.

BTM embedded

This gauge is specially designed to separately

measure bending and tensile stresses by bonding
the gauge to one side of a plate or beam on the
assumption that strain distribution in the section of
the plate or beam subjected to both bending and
tensile stress is linear.

One-side
Strain Gauge
DD

FAC-5
Crack Detection
Gauge

This gauge is designed to measure the progress of

crack and the rate of growth in a test specimen for
which metal fatigue should be monitored. Special
adaptor CGA-120B is required between the gauge
and strainmeter.

FAC-20

FAC

10~ +70

Single element

20~ +80

Single element

20~ +60

Single element
Full bridge

CGA-120B
This is a transducer designed for measuring axial
strain of a tie-rod (tension rod). It is suited to
measurement of steering tie rod of a motor car. It
is also applicable for tensile force measurement of
tension rod in a seismic strengthened architecture
or a steel frame structure.

FGAH-1A
Frictional type
Axial force
S t r a i n Tr a n s d u c e r
FGAH

This transducer is developed with frictional strain

gauge, not requring bonding ahdhesive, and
telemetry transmitter is incorporated. By installing
it on a car's driving shaft, torque can be easily
measured. Two models of FGDH-1B and FGDH-2A
are available for different telemetry receiver.

FGDH-1B
Frictional type
Torque Transducer
FGDH

FGDH-1B
10~ +50

Special

FGDH-2A
20~ +60

FGDH-2A
FGMH-1B FGMH-2A
Frictional type
Strain Checker
FGMH

The strain checkers pick up strains through friction

by pressing down the strain sensing element
on the structures with the magnet. The checker
can be easily fixed on the position of interest and
immediately gets ready for strain measurement.

0~ +60

Single/ 3element

FGMH-3A

Transducer specific
Strain Gauges

TML gauges are not only used for strain measurement, but also as sensors for strain gauge-type
transducers including force transducer (load cell),
pressure transducer, displacement transducer,
acceleration transducer, and so on.

For details, contact TML or your

local representatives.

SPOT WELDER W-50R, W-50RB

This is a capacitive discharge spot welder used for installing weldable strain gauges
and fixing lead wires. The welding energy is controlled in 2 ranges of 1~10/5~50 watt
second continuously,and a stabilizing circuit cancels the effect of changes in the
power source voltage.
W-50RB carries CE marking.

STRAIN GAUGE CLAMP - Gauge Mate GMA/GMR, and PRESSEE

GMA-S
for flat specimen of
1mm thick or more

GMR-S
for round specimen of
6~32mm-dia.

PRESSEE
with pressing area
of 19mm-dia. for
flat specimen

These are pressing jigs for strain gauge

adhesion. They can be used with roomtemperature curing type bonding adhesive.
The pressing part of the Pressee is
transparent, and the adhesion state can be
confirmed.

Press & See

6

STRAIN GAUGE ADHESIVES

Type

Component

Operational

Temperature (C)

Applications

P-2

Polyester

30 ~ +180

Two-component, Room-temperature-curing (mixing ratio: 2 ~ 6%), General use

RP-2

Polyester

30 ~ +180

Two-component, Room-temperature-curing (mixing ratio: 2 ~ 4%), Concrete use

NP-50

Polyester

30 ~ +300

Two-component, Room-temperature-curing (mixing ratio: 6 ~ 8%), High temperature use

PS

Polyester

30 ~ +100

Two-component, Room-temperature-curing (mixing ratio: 2 ~ 4%), Concrete use

CN

Cyanoacrylate

196 ~ +120

Single component, Room-temperature-curing, General use

CN-E

Cyanoacrylate

30 ~ +120

Single component, Room-temperature-curing, Concrete, mortar or porous material use

CN-Y

Cyanoacrylate

30 ~ + 80

Single component, Room-temperature-curing, Post-Yield gauge use (large strain measurement)

CN-R

Cyanoacrylate

30 ~ +120

Single component, Room-temperature-curing, For use in low temperature, Winter season's production

C-1

Phenol

269 ~ +200

Single component, Heat-curing, Recommendable for use in long term of period and in high temperature

EA-2A

Epoxy

269 ~ + 50

Two component, Room-temperature-curing (mixing ratio: 2:1), Cryogenic temperature use

EB-2

Epoxy

30 ~ +200

Two component, Room-temperature-curing (mixing ratio: 10:3), Long term measurement use

A-2

Epoxy

30 ~ +100

Two component, Room-temperature-curing (mixing ratio: 10:1), BTM bolt strain gauge use

MSDS : Material Safety Data Sheet

TML supplies MSDS for all strain gauge adhesive and
coatings. Contact your TML supplier for more
information.

STRAIN GAUGE COATING MATERIALS

Type

Operational

Temperature (C)

Application

Materials

Description

W-1

0 ~ +50

Hot-melting 100~120C
Room-temperature curing

SB tape

30 ~ +80

Pressure sensitive

Buthyl

3-mm thin tape-form coating, Very convenient to use

VM tape

20 ~ +80

Pressure sensitive

Buthyl

1-mm thin tape-form coating

Epoxy resin

60 ~ +100

Two-component (Mixing ratio: 10:8)

Room-temperature curing 24 hours

Epoxy

General purpose coating for mechanical protection

Epoxy resin
AV138

60 ~ +180

Two-component (Mixing ratio: 10:4)

Room-temperature curing 24 hours

Epoxy

Mechanical protection use in high-temperature

KE-348

50 ~ +200

Air-drying solvent
Room-temperature curing 12 hours

Silicon rubber

Heat-resistive

TSE3976-B

50 ~ +300
(short term)

Air-drying solvent
Room-temperature curing 12 hours

Silicon rubber

Heat-resistive, For long term use, temperature is restricted up to +250C

Single-layer coating with one

type of coating

Microcrystalline General purpose coating for laboratory and field requirements where
mechanical protection is not needed, or as a prime-coat for duplex coating
wax solid

Multi-layer coating with

different types of coating

MSDS : Material Safety Data Sheet

TML supplies MSDS for all strain gauge adhesive and coatings. Contact your TML supplier for more information.

CONNECTING TERMINALS
Connecting terminals provide convenient junction points to
connect strain gauges to instrumentaion leads.
Cubic shape

for general purpose

TS-2
T-2
T-3

for large strain with rubber backing

TYS-2
TY-2
TY-3

TP-2
Self-bonding type
(No adhesive required)

Foil shape

Cubic shape
Type

TS-2
T-2
T-3 (3-wire method)
TYS-2
TY-2
TY-3(3-wire method)
TP-2

TF-2SS TF-2S

for large strain with rubber backing

TF-2MS

TF-2M

TFY-2SS TFY-2S TFY-2MS

Operational
Temperature(C)

Quantity
per box

7.57.5 5
10 10 5
10 10 5
7.57.5 7
10 10 7
10 10 7
10 10 6

20 ~ + 90
20 ~ + 90
20 ~ + 90
20 ~ + 90
20 ~ + 90
20 ~ + 90
20 ~ + 60

100
100
100
100
80
80
100

Dimension
(mm)

Operational
Temperature(C)

Quantity
Pairs/sheet

4.63.80.2
6 5.30.2
8 7.20.2
10 9.20.2
4.63.80.8
65.30.8
87.20.8
109.20.8
4.63.80.2
65.30.2
87.20.2
109.20.2
4.63.80.1
65.30.1
87.20.1

196 ~ + 180
196 ~ + 180
196 ~ + 180
196 ~ + 180
20 ~ + 120
20 ~ + 120
20 ~ + 120
20 ~ + 120
196 ~ + 200
196 ~ + 200
196 ~ + 200
196 ~ + 200
269 ~ + 350
269 ~ + 350
269 ~ + 350

50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

Foil shape
Type

for general purpose

Dimension
(mm)

TFY-2M

High temperature use with polyimide resin backing

TPF-2SS TPF-2S
TPF-2MS TPF-2M
TPFH-2SS TPFH-2S TPFH-2MS
NB:
TPFH series features heat-resistive connecting terminals with polyimide
resin backing to TPF. It allows high temperature measurement using QF/
ZF series gauges and bonding repetition on the terminals.

TF-2SS
TF-2S
TF-2MS
TF-2M
TFY-2SS
TFY-2S
TFY-2MS
TFY-2M
TPF-2SS
TPF-2S
TPF-2MS
TPF-2M
TPFH-2SS
TPFH-2S
TPFH-2MS

1-GAUGE 4-WIRE STRAIN MEASUREMENT METHOD

For strain gauge measurement, various bridge configurations are
employed accoring to the number of strain gauges to be used and
measuring purpose. In quarter bridge configuration, three wire
method is widely used to remove the effect of temperature to gauge
leadwire resistance; however, some measurement error is caused

by variation of contact resistance of connection parts and correction

for gauge factor change due to lead wire resistance is required. Our
patented 1-gauge 4-wire strain measurement method serves to
eliminate such an error and make gauge factor correction
unnecessary.

Leadwire resistance

Strain gauges with leadwires and modular plug

In conventional method, as bold and short leadwires as possible

are recommended to keep the resistance of leadwires lower. On
the contrary, as the 1-gauge 4-wire method is not influenced at all
by the leadwire resistance, it is possible to connect a thin and long
leadwires to strain gauges.

Contact resistance

In conventional method, leadwire extension and connection to a

measuring instrument are done by soldering or the use of
exclusive connector. As the 1-gauge 4-wire method is not affected
at all by contact resistance, a modular plug can be used. Because
the modular plug makes leadwire extension and connection to the
instrument possible by merely plugging in, the efficiency of wiring
work and prevention of wiring mistake are achieved and also
RoHS-compliant lead free soldering is unnecessary.
Using commercial interconnection adapter, leadwire extension can be easily done.

The strain gauges are used in our developed 1-gauge 4-wire strain
measurement method. Most of our strain gauges can be supplied
with pre-attached leadwires and modular plug (RJ12). As a modular
plug is attached to the end of the leadwires, soldering or screwing
connectioin to a measuring instrument is unnecessary, but the
instrument must be of TML make. The 4-wire leadwires are covered
with polypropylene resin which does not generate noxious gas even
if disposed by fire.

Single element strain gauge with 4-wire paralleled leadwire

Rectangular 3-element, 0/45/90 stacked rosette strain gauge

With 6-wire paralleled leadwire and modular plug

Instruments applicable

With TML Data Logger, 1-gauge 4-wire method is completed by mererly

connecting the modular plug to its built-in switching box or Switching Box.

With 4-wire paralleled leadwire and modular plug

Data Loggers:
TDS-630, TDS-530, TDS-150, TC-32K
Switching Boxes:
IHW-50H, IHW-50G, ISW-50G
SSW-50D, FSW-10, CSW-5B
Dynamic Strainmeter DRC-3410

LOAD CELLS

Compression

CLS-NA/CLS-NB

Compression, Miniature
2N~10kN

LOAD CELLS Compression

CLB-NA

Low Range, Compression

50~200N

CLA-NA

Compression
500N~20kN

CLG-NB

Compression, Low Profile

10~200kN

CLP-NB

CLU-NA

CLM-NB

CLJ-NA

Compression 10kN~10MN
Dual-output option is available.

Compression 10kN~1MN
Dual-output option is available.

Compression, High Performance

10kN~2MN

Compression, High Performance

Remote sensing
5~30kN

CLF-NA

CLL-NA/CLH-NA

CLR-NAH

LOAD CELLS

Compression

CLJ-NB

High temperature +160C

Compression, High Performance

Remote sensing
10kN~10MN

LOAD CELLS Compression

KCE-NA

Compression, Center-hole
500kN ~ 2MN

LOAD CELLS Compression

KCC-NA

Compression, Center-hole
200kN ~ 1MN

Compression, Low Profile

500kN~10MN

Compression, Flat Face

CLH-NA
1~2MN
CLL-NA 500kN~1MN

KCM-NA

CLC-NA

Compression, Center-hole
10kN ~ 5MN

Tension/Compression
5~50kN

KCG-NA

Compression, Center-hole
Strand force measurement
200kN

Tension/Compression universal
KCK-NA

Compression, Center-hole
500kN / 1MN

LOAD CELLS Tension/Compression universal

TCLK-NA

Compression, Center-hole
50kN ~ 5MN

500N~200kN

TCLZ-NA

Tension/Compression
High Performance
10N~10kN

TCLB-NA

Tension/Compression
50~200N

TCLM-NB

Tension/Compression
High Performance
10~200kN

TCLA-NB

Tension/Compression
500N~20kN

TCLY-NA

Tension/Compression
High Performance
300kN~2MN

LOAD CELLS Tension/Compression universal

TCLP-NB

Tension

TCLU-NA

TCLN-NA

Miniature Tension/Compression
500N~5kN

Tension/Compression 10kN~2MN
Tension/Compression 10~200kN
Dual-output model is available at option Dual-output model is available at option

LOAD CELLS Tension

TLP-NB

Tension 10kN~1MN
Dual-output option is available.

TORQUE TRANSDUCERS

TLJ-NA

Tension, High Performance

Remote sensing
10~100kN

DISPLACEMENT TRANSDUCERS

LTA-NA

LTB-NA

Socket wrench torque transducer

50~500Nm

Flange type torque transducer

10Nm~1kNm

CDP/CDP-D

High sensitivity 5~100mm(CDP)

Spring loading, Dual-output 50/100mm
(CDP-D)

DISPLACEMENT TRANSDUCERS
CDP-B

CDP-M/CDP-MT

DDP-A

SDP-C/SDP-D

Dial Gauge type

10~50mm

Spring loading 50/100mm(SDP-C)

Spring Loading 200/300mm(SDP-D)

FDP-A

PI

CDP-M
CDP-MT

Drip-proofing, High Sensitivity

Spring loading 5~25mm

Miniature, High Sensitivity

5~100mm

DISPLACEMENT TRANSDUCERS
SDP-CT

DP-E

Protection ratings: IP-68

PI-2-50

PI-2

Spring Loading, Tension Type

50/100mm

Tape Measure Type, Long Span

500 ~ 5000mm

DISPLACEMENT TRANSDUCERS
CE

OU

Waterproof, LVDT Type

10 ~ 100mm

Large Span 2 / 5mm

Gauge Length 50~300mm

RA/RA-L

UB/UB-A

COD Measurement

Cantilever Type 2~10mm

EXTENSOMETER
EDP-A/EDP-B

Ring Type 10 ~ 30mm

RA / RA-L 2/5mm
RA-L for Cryogenic temperature -196C

PRESSURE TRANSDUCERS
PW-PA/PWH-PA

PWF-PB/PWFC-PB

Flush Diaphragm Type

Cavity Type

COD Measurement

UB 2/5mm
UB-A 5mm (ASTM compatible)

PWA-PAH
High temperature +120C

Amplifier-integrated
PW-PA

5mm
For Round Specimen : EDP-A
For Flat Plate Specimen : EDP-B

PWH-PA

100kPa~50MPa

70~200MPa

PWF-PB 1~50MPa

PWFC-PB (Small) 2~50MPa

2 ~ 50MPa
Voltage Output : PWA-PAHV
Current Output : PWA-PAHA

10

ACCELERATION TRANSDUCERS

PRESSURE TRANSDUCERS
PW-PAH

PWFD-PB/PWFE-PA
High Temperature +150C

High Temperature +170C

PDA-PA/PDB-PA
Miniature

200kPa~3MPa

ARS-A
High Sensitivity
10m/s2

Bolt Mount type

2~20MPa
PWFD-PB (M8 size)
Small, 2~50MPa

PWFE-PA
(M6 size)

ACCELERATION TRANSDUCERS
ARM-A-T

Small, Tri-Axial
X, Y: 100m/s2 , Z: 400m/s2

2~20MPa

ARF-A/ARF-A-T

Small, Low Range

Uni-axial : 10~500m/s2, ARF-A
Tri-axial : 20~500m/s2, ARF-A-T

Tri-axial
ARF-A-T

ARE-A/ARE-A-T
Uni-axial
Tri-axial

ARE-A 100010000m/s2
ARE-A-T 1000 5000m/s2

ARJ-A/ARJ-A-D/ARJ-A-T

Tri-axial: ARE-A-T

ARK-A

Waterproof, Low Range 10 ~ 500m/s2

Small, High Frequency Response

1000/2000m/s2

Accessory Mounting Plates

ARJF-11

ARFF-11

ARJF-12

KM-100HAS

KM/KM-AT/KM-BT

ARHF-11

ARSF-11
5000106 strain
For concrete materials
Thermocouple-integrated : KM-AT/-BT

Tri-axial: ARJ-A-T

STRAIN TRANSDUCERS

ARH-A
Protection ratings: IP-67

STRAIN TRANSDUCERS

ACCELERATION TRANSDUCERS

Uni-axial
ARJ-A Bi-axial
ARJ-A-D

PDB-PA

Uni-axial: ARE-A

Uni-axial
ARF-A

Small, High Frequency Response

50 ~ 2000m/s2

PDA-PA

REINFORCING-BAR METER JOINT METER

KSA-A/KSAT-A

SHEAR-DISPLACEMENT TRANSDUCER

KJA-A/KJB-A

KU-A

5~50mm
5000106 strain

For asphalt pavement materials

300N/mm2

KSAT-A Thermocouple-integrated

COMPRESSOMETER

CRACK DISPLACEMENT TRANSDUCERS

KG-A

KJA-A for embedment in concrete

KJB-A for concrete surface

KG-B

CM/CM-H

For Concrete Structures : 2.5mm

PORE PRESSURE GAUGES

KPA-PA/KPB-PA
KPA-PA

KPB-PA

For Concrete Crack : 2/5mm

PORE PRESSURE GAUGES

KPC-PA/KPD-PA

For Concrete Crack in 2-directions

X: +4mm/2mm, Y: 3mm

Gauge length:
CM : 50/100/125/150mm
CM-H with destructive proof : 100mm

KDA-PA/KDB-PA
200mm

100mm

KDA-PA
KPD-PA

11

KDC-PA/KDD-PA

KDD-PA

KDB-PA

200kPa~2MPa

200kPa~2MPa

SOIL PRESSURE GAUGES

KPE-PB

KPC-PA

30mm

40mm

Small, Model-Kit Test

200kPa~2MPa

200kPa~2MPa

KDC-PA

200kPa~2MPa

SOIL PRESSURE GAUGES

KDE-PA/KDF-PA

50mm

KDG-PA/KDH-PA

100mm

KDF-PA

KDE-PA

Load Cell type

180mm

KDK-PA

200kPa~2MPa

200kPa~2MPa

KB-AB/KB-AC

KB-B
Impactproof Type

200kPa

KB-DB/KB-EB

KB-JG/KB-KG
Multi-layer use

Small Type

0.5~2

1~5

KDL-PA

KDJ-PA

INCLINOMETERS
Surface Type

200mm Load Cell type

KDH-PA

KDG-PA

200kPa~2MPa

KDJ-PA/KDK-PA

5/10

5/10

Max 15 layers
KB-DB : 1-directional
KB-EB : 2-directional

KB-AB : 1-directional
KB-AC : 2-directional

INCLINOMETERS
KB-JH/KB-KH

Multi-layer use

KB-KD

NKB-LE/NKB-ME

Multi-layer use

Multi-layer use
for TML-NET

5/10

5/10

5/10

KB-JG : 1-directional
KB-KG : 2-directional

Connector

KB-P
Built-in Arrestor

Embedment Type

Max 31 layers
5/10

Max 15 layers
KB-JH : 1-directional
KB-KH : 2-directional

INCLINOMETERS
KB-GC/KB-HC

2-directional

High Outputs

MICRO CREEP METER

KH-A

Insertion Type

NKB-LE : 1-directional
NKB-ME : 2-directional

WATER LEVEL METERS

WATER-TUBE DISPLACEMENTTRANSDUCERS

KW-C

KWL-B/KWL-E
Built-in Arrestor

Built-in Arrestor
KWL-B

KWL-E

KW-10C

5/10

KW-20C
KB-GC : 1-directional
KB-HC : 2-directional

5mm

GROUND EXTENSION GAUGES

KLG-A/NKLG-AB

Built-in Arrestor

Land Slide
Measurement

10, 20, 30, 50m

Water Pressure Type Water Level Type

1, 2m
100, 200mm

SETTLEMENT TRANSDUCERS
KLG-B/NKLG-BB

Built-in Arrestor

KLG-1000C

KLA-A/NKLA-B

Mechanical Counter Type

No Power Required
Max 6 layers

Land Slide
Measurement

KLG-A : 200mm

KLG-B : 50, 100mm

NKLG-AB: TML-NET compatible 200mm NKLG-BB: TML-NET compatible 50, 100mm

1000mm

KLA-A : 100, 200mm

NKLA-B : TML-NET compatible 100,200mm

SETTLEMENT TRANSDUCERS ROCK DISPLACEMENT TRANSDUCERS CAISSON SKIN-FRICTION METER CAISSON CUTTING-EDGE REACTION METER
KLC-50A

KLB-A

KKA-PB

KKB-PA/KKB-PB

Multi-layer Type

Max 8 layers

50mm(20~ +30mm)

Max 8 layers

100mm

200, 300kPa

KKB-PA : 2MPa
KKB-PB : 5, 10, 15MPa

12

STRAIN MEASURING INSTRUMENTS

Static Measurements

Strain which is regarded as no change with time is called static

strain. The strain can be measured digitally by scanning the
measurement channels of a static strainmeter or data logger.
Data Logger
High Performance Data Logger
TDS-630

Interface : LAN/USB/RS-232C
* : For combination use with PCU-4A

Switching Box

Interface : LAN/USB/RS-232C

Portable Data Logger

TDS-150
Interface:
USB/RS-232C
LAN (option)

Handheld Data Logger

TC-32K

Channels
at max.

Fastest measuring time

IHW-50H

1000

0.1 sec.

IHW-50G-01*

1000

0.1 sec.

IHW-50G

1000

ISW-50G

1000

ASW-50C
SSW-50D/-10MC

1000

Built-in (High Speed)

Data Logger
TDS-530

Combination of a data logger and external switching boxes allows

measurment of up to 1000 channels to be performed in the fastest
0.1 seconds.

30

IHW-50G

1000

ISW-50G

1000

ASW-50C
SSW-50D/-10MC

1000

IHW-50H

0.4 sec.
IHW-50G

2 sec.
60 sec.
0.1 sec.
0.4 sec.
2 sec.
60 sec.
SSW-50D

Built-in (High Speed)

30

0.4 sec.

Built-in (Standard)

30

FSW-10

50

3.4 sec.

FSW-21C

100

8.3 sec.

CSW-5B

Main body only

1.2 sec.

0.4 sec.

Interface: USB/RS-232C

FSW-10

FSW-10L

CSW-5B

0.06 sec.

CSW-5B-05

TML Data Loggers are designed for multi-input measurements of strain, strain-gauge based transducer, DC voltage and temperature.

High Performance DATA LOGGER

TDS-630
High speed 1000 channels in 0.1 sec.
Color LCD monitor with touch panel
Display toggle between Japanese and
English
Onboard analog output upto 20 channels
(Option)
3-Interface LAN, USB2.0 and RS232C
High resolution mode with 0.1x10-6 strain
Built-in 30-ch switching box at max. with
semicondutor relay(10-ch as standard)
Direct reading in physical quanity
1-Gauge 4-Wire strain measurement with
modular plug connection
New compensation methods of measuring strain provided

13

DATA LOGGER
TDS-530
High speed 1000 channels in 0.4 sec.
Color LCD monitor with touch panel
Display toggle between Japanese and
English
3-Interface LAN, USB2.0 and RS232C
High resolution mode with 0.1x10-6 strain
Built-in 30-ch switching box at max. with
semicondutor relay(10-ch as standard)
Direct reading in physical quanity
1-Gauge 4-Wire strain measurement with
modular plug connection
New compensation methods of measuring strain provided

High Speed SWITCHING BOX

IHW-50H

High Speed SWITCHING BOX

IHW-50G

Exclusive switcing box for Data Logger

TDS-630 with the fastest measurement
of 1000 channels in 0.1 sec.
Simultaneous measurement of strain and
temperature with one channel
High resolution mode with 0.1x10-6 strain
Compatible with high speed communication method TML-LINK
Onboard lightning surge arrester on each
channel
1-Gauge 4-Wire strain measurement with
modular plug connection
New compensation methods of measuring strain provided

Electricaly insulated with Data Logger

Multi-measurement of strain, DC voltage
temperature with PtRTD and thermocouple
Connectable Data Logger TDS-530, TDS630
1-Gauge 4-Wire strain measurement with
modular plug connection
Simultaneous measurement of strain and
temperature with one channel
High resolution mode with 0.1x10-6 strain
Onboard lightning surge arrester
New compensation methods of measuring strain provided

STRAIN MEASURING INSTRUMENTS

Static Measurements

SWITCHING BOX
ISW-50G

SWITCHING BOX
SSW-50D

Electricaly insulated with Data Logger

Multi-measurement of strain, DC voltage
temperature with PtRTD and thermocouple
Connectable Data Logger TDS-530, TDS630
1-Gauge 4-Wire strain measurement with
modular plug connection
Simultaneous measurement of strain and
temperature with one channel
High resolution mode with 0.1x10-6 strain
Onboard lightning surge arrester
New compensation methods of measuring strain provided

Compatible with TML 1-Gauge 4-Wire

strain measurement method
Available for strain, DC voltage and
thermocouple measurements
Can be used with conventional models
SSW/ASW-50C
Complete strain correction method
provided
Cascade connection by one cable of
9mm-dia. with data logger
Applicable Data Loggers: TDS-530

PORTABLE DATA LOGGER

TDS-150

CHANNEL UNIT
FSW-10/FSW-10L

Connectable Five decade channel units

(FSW-10/FSL-10L) for 50 channels max.
Possible long-term automatic measurement using sleep interval timer
AC, alkaline D-cells or battery driving
Multi-measurement of strain, DC voltage,
temperature with PtRTD and thermocouple
1-Gauge 4-Wire strain measurement with
modular plug connection
New compensation methods of measuring strain provided
Connectable TML-NET network modules
(Factory installed option)

HANDHELD DATA LOGGER

TC-32K

Controller
ZT-211

Strain Module ZT-221

Voltage Module ZT-231
Thermocouple Module ZT-232

FSW-10

Exclusive decade channel units for Data

Logger TDS-150
FSW-10L comes with compact size
Expandable up to 5 units (50 channels)
Multi-measurement of strain, DC voltage,
temperature with PtRTD and thermocouple
1-Gauge 4-Wire strain measurement with
modular plug connection [FSW-10]
FSW-10L

CSW-5B-05

CSW-5B

SWITCHING BOX
CSW-5B/CSW-5B-05

Measurement of strain, DC voltage,

temperature with PtRTD and thermocouple
Insulation and resistance measurement
function is provided to check sensors.
1-Gauge 4-Wire strain measurement
One touch connector of sensor cable
Multiple measurements with exclusive
Switching Box CSW-5B
N e w c o m p e n s a t i o n m e t h o d s o f
measuring strain provided
Possible automatic measurement using
sleep interval timer

Exclusive 5 channel units for Handheld

Data Logger TC-32K
CSW-5B comes with compact size
Multi-measurement of strain, DC voltage
temperature with PtRTD and thermocouple
1-Gauge 4-Wire strain measurement

REMOTE POWER CONTROLLER

RPC-1A/RPC-05A

EXTERNAL DISPLAY UNIT

EDU-11

Controls remotely power on/off

Applicable instruments
Data Logger TDS-530, TDS-150,TC- 32K
Network Handheld Strainmeter TC-35N
An excessive power protection built in
the power supply section (12V/24V)
Incorporates auxiliary recharge circuit to
battery
ON-OFF power control by computer via
RS232C

Remote display with large, high-brightness

LED for monitoring TDS-530, TDS-150
or TC-32K
Any channel available for monitor
By cascading connection, multi-channel
monitoring is possible.

WIRELESS MESH TELEMETRY SYSTEM

ZT-200 Series
High reliable strain measuring system
with wireless mesh networks
Mesh connectivity establishes a wireless
measuring system with sensor modules
up to 20 units for strain, voltage, thermocouple
Mesh interface functions to avoid data
damage, making spreads of measuring
area possible.
With the built-in LAN, remote measurement via router is available.
Wireless telemetry system makes simple
measuring system possible.

Wireless
Module
ZT-014

Wireless
Controller
ZT-150

Wireless
Controller
ZT-120

WIRELESS DATA ACQUISITION SYSTEM

ZT-014/ZT-120/ZT-150
Wireless data acquisition from PCs or
our Data Loggers
R e s i s t i v e t o n o i s e o w i n g t o d i g i t a l
processing near sensors
Very low power consumption, possible
one year or more measurement
About 50m communication in an open
view
Small and lightweight wireless modules
Two types of Wireless Controller
ZT-120 is connected to PCs by USB
ZT-150 is connected to TDS-150

14

TML-NET NETWORK MEASUREMENT SYSTEM

TML NET is a data acquisition network for strain measurement to perform
measurement control and data transfer using two-wire cable. Unlike
ordinary analog measurement system, there is no influence of sensitivity
drop due to cable extension and insulation lowering, so long term and
stable measurement is achieved. Connection between measurement
modules can be made by star type or ring type, and the wirings can easily
be done. The NET is also compatible with 4-wire system wherein power
supply is provided by another line for measurement channel and distance
extension. Mixing with 2-wire system is possible. And this system is driven
by Data Logger TDS-630, TDS-530, TDS-150, or PC, Network Handheld
Strainmeter TC-35N, Monitoring Sys-tem Controller MD-111.

TML-NET Network Measurement System

Inputs Quarter Bridge Full Bridge
DC
Strain Gauge

Strain Gauge
Transducers

voltage

Static Measurements

Easy connection and branch

Small and lightweight network module - Easy installation
No sensitivity drop due to cable extension
Resistive to noise owing to digital processing near sensors
No influence of insulation lowering
Various Network Modules for strain gauge, strain gauge-type transducers, DC
voltage, and thermocouple
2km total distance (between data logger and NDR-100)
2km total distance (between NDR-100 and network module)
Possible mixing of 2-wire and 4-wire
Available combination with external switching boxes-Isolated between instruments

Thermocouple
Network Driver
NDR-100
Switching Box
ASW/SSW

Network NSW-011C
module

NSW-014C
NSW-024C

NSW-01VB

NSW-01TB

Portable Data Logger

TDS-150-06

TML-NET compatible transducer

with built-in Net work module

Ground extension gauge

Network Interface
NIF-100

PC

Internet

Static measurement
software TDS-7130

RS-232C

Handheld Strainmeter
TC-35N

Power supply DC12-28V

Regulated power supply
External DC input

Inputs

RS-232C

Inclinometer
Settlement
transducer

Monitoring System
Controller MD-111

NETWORK DRIVER
NDR-100

PC

RS-232C

Internet

ALARM outputs

Revolving light

Pulse count

Rain gauge

NETWORK INTERFACE
NIF-100

Connects network modules to Data Logger

TDS-630/TDS-530

Direct driving from a PC using the built-in

RS-232C interface

100 channels per unit, maximum 10 units,

total 1000 channels

100 channels per unit

Possible parallel use with ordinary Switching
Box SSW/ASW

Possible parallel use with ordinary Switching

Box SSW/ASW
2km total distance between Data Logger
and NDR-100

Compatible with Visual LOG TDS-7130v2

static measurement software

NETWORK HANDHELD
STRAINMETER TC-35N

MONITORING SYSTEM
CONTROLLER MD-111

AA(LR6) battery operation

Available to build a small measuring
system, or to check function on site

Output contact functions to build an

alarm system

RS-232C interface available

5 modules use with built-in battery AA
(LR6) or AC adaptor 100 modules use
with external DC input
Built-in compact flash card
Measurement with Sleep interval function

15

PC

RS-232C

TML-NET Driving
board(Op-06)

2-wire connection

Data Logger
TDS-630
TDS-530

7-core
cable

Measurement with Sleep interval function

RS-232C interface available
5 modules use with built-in battery D
(LR20) or 100 modules use with external DC input
Data recording on SD card

TML-NET Network Measurement System

Static Measurements

NETWORK MODULES NSW-C TYPE with low power consumption

Full bridge 2-channel module NSW-024C
Strain full bridge method
2 measuring channels per unit
Expandable up to 100 units (200 channels)
Low power consumption
During standby 1mA MAX
During measurement 36mA MAX
120 ~ 1000
30000106 strain

Strain Quarter bridge module NSW-011C

Strain Quarter bridge 3-wire method
Low power consumption
During standby 1mA MAX
During measurement 36mA MAX
Either 120 or 350
30000106 strain

Strain Full bridge module NSW-014C

Strain Full bridge method
Low power consumption
During standby 1mA MA
During measurement 36mA MAX
120 ~ 1000
30000106 strain

NETWORK MODULES NSW-B TYPE

Thermocouple module NSW-01TB

Voltage module NSW-01VB

DC Voltage
Measuring range

V1 2.5V V2 25V

Counter module NSW-01C

Thermocouple T applicable [JIS C1602(1995)]

Measuring range -200~+400C

TML-NET COMPATIBLE TRANSDUCERS

This transducer is a strain gauge-type transducer with a
built-in digital conversion module. It is designed specifically
for network measurement. Data can be transmitted when it
is connected to the driver NDR-100 of the TML-NET that
has a data recording function. Digital data transmission
requires only a simple two-wire cable to connect this
transducer to the driver. Additional TML-NET compatible
transducers can also be connected to this transducer using
two-wire cables. In addition, generally used strain gauges,
transducers, thermocouples or resistance temperature
detectors can also be connected to the TML-NET system via
a switching box.

With built-in gas-tube arrestor

for Transducers and
Instruments

SAT-1A (1-ch use)

SAT-5A (5-ch use)

SAT-1N
for TML-NET

For non-voltage contact or Open collector input

to count rainfall, flow rate, pass number of
transportation, working rate of machinery, etc.
Input signals: Contact/Open collector/Square
wave

Ground Extension Gauge

NKLG-BB
Inclinometer
NKB-LE
NKB-ME

SURGE ABSORBER
SAT-A/SAT-N
Surge absorber SAT-A and SAT-N are
designed to protect transducer and
instrument from lightning-induced
currents..
DC Breakdown in volts(100V/s): 72~108V
Impulse Breakdown in volts (100V/s):
450V at Max.
Impulse Discharge current 8/20s : 10kA
AC Discharge current (50Hz) 9 cycles :
65A
DC Holdover voltage : 50V
Surge life (10/1000s 500A): 100 shots
Insulation Resistance : 10000 M at Min.
Electrostatic capacitance: 2.0pF at Max.

Settlement Transducer NKLA-B

NZ-6B

NZ-7C

NZR-7B

Ground Extension
Gauge NKLG-AB

ARRESTER-PROTECTED
MEASURING SYSTEM
When using instruments and transducers
in a field measurement for a long term,
protection from surge voltages which
may be caused by lightning is important.
The NZ-7C/NZR-7B are designed for
connection close to the data logger or
switching box for protection of the instrument.
The NZ-6B is designed for connection
close to the transducer or switching box
for protection of the transducer or instrument.

QUICK CONNECTING TERMINAL

SB-OT1A
This terminal is capable of connecting
input lead wire by merely pressing down
the knob and inserting the lead wire into
the hole of the terminal. The lead wire
is secured by the restoring spring force
of the knob. This terminal is mounted
on the input terminal of switching box.
One temrinal is used for one lead wire.
(One set contains five terminals).

16

STRAIN MEASURING INSTRUMENTS

Dynamic Measurements

Strain which changes with time is called dynamic strain. The strain
is amplified in analog and output by a dynamic strainmeter for data
storage and analysis on external recording system. One dynamic
strainmeter used to be needed for one measurement point, but

nowadays digital single or multi-channel dynamic strainmeters

which convert analog signal into digital value at high speed stores
data in internal memory and transfer to a PC are available.

DIGITAL DYNAMIC STRAINMETER

Type

No. of
Bridge Voltage
channels

Frequency
Response

DRA-162B

Interface

DRC-3410

DRA-162B

16

0.5, 2Vrms 5kHz

DC ~ 2.5kHz

LAN

DRA-3410

30

DC0.5, 2, 5V

DC ~ 100kHz

LAN

DRA-101C

10

0.5, 2, 5Vrms 5kHz

DC ~ 2.5kHz

GP-IB
RS-232C

DRA-107A

10

0.5, 2Vrms 5kHz

DC ~ 2.5kHz

GP-IB

DC-204R
DC-204Ra

4
4

DC0.5, 2V
DC0.5, 2V

DC ~ 10kHz
DC ~ 10kHz

USB

DC-004P

DC0.5, 2V

DC ~ 2kHz

USB

DH-14A

DC0.5, 2V

DC ~ 1kHz

DRA-30A

30

DC2V

DC ~ 3kHz

USB
GP-IB

DS-50A

50

DC2V

DC ~ 100Hz

DRA-30A

DRA-101C

DRA-107A

DC-204R

DS-50A

DH-14A
DC-004P

LAN

ANALOG DYNAMIC STRAINMETER

Type

No. of
Bridge Voltage
channels

Frequency
Response

DA-17A

0.5, 2Vrms 5kHz

DC ~ 2.5kHz

DA-18A

0.5, 2Vrms 5kHz

DC ~ 2.5kHz

DA-37A

0.5, 2Vrms 20kHz

DC ~ 10kHz

DA-17A DA-18A

0.5, 2Vrms 20kHz

DC ~ 10kHz

DC-96A

DC0.5, 1, 2, 5, 10V

DC ~ 200kHz

DC-97A

DC0.5, 1, 2, 5, 10V

DC ~ 500kHz

17

DC-96A

DC-97A

Bridge Boxes
1-ch use

DA-38A

DA-37A DA-38A

2-ch use
8-ch use

Quarter-bridge use

Carrying Case
housing 4-/6-/8-ch
Mounting Rack
housing 10-ch

DIGITAL DYNAMIC STRAINMETER

DRA-162B

DIGITAL DYNAMIC STRAINMETER

DRC-3410

16-chanel carrier wave type

16-bit A/D converter is builtin for each
channel, recording waveform in digital
data
Data memory of 256k words per channel
TEDS compatible
Binary high-speed transfer by LAN
Expandable 16 units(256 channels) max.
synchronous measurement available.
Data read-in software supplied

Each channel incorporates A/D converter for simultaneous measurement

for all 30 channels
Waveform data stored in digital values
Built-in large capacity memory
High speed sampling at 1M samples
per second
High speed and large data transfer by
LAN interface

STRAIN MEASURING INSTRUMENTS

Static strain mode

Dynamic strain mode

Dynamic Measurements

DIGITAL DYNAMIC STRAINMETER

DRA-101C

DIGITAL DYNAMIC STRAINMETER

DRA-107A

Built-in A/D converter for each channel

for digital waveform recording
Built-in data memory (standard 48k
words /channel, expandable up to 496k
words/channel at the maximum)
Various functions of digital processing
Analog output of calibration voltage
and recorded waveform through D/A
converter
External sampling clock input capability
High resolution mode (0.1x106 strain)

Built-in A/D converter for each channel

for digital waveform recording
Built-in data memory of 496k words/
channel
Various functions of digital processing
High resolution mode (0.1x106 strain)
Data read software DRA-7107 supplied
as an accessory

MULTI-CHANNEL DIGITAL STRAIN

METER DRA-30A

SMART DYNAMIC STRAIN RECORDER

DC-204R/DC-204Ra

Either dynamic or static strain measurement available by switching

Possible quarter (in 3-wire system), half
and full bridge and voltage measurements
Each channel incorporates A/D converter
for simultaneous measurement and
record in digital values for all channels
On-line measurement with built-in GPIB and USB interface
Control software DRA-730A supplied as
an accessory

4-channel configuration with miniature

size like postcard
Sampling speed of max. 5-sec./channel
Data recording on compact flash card of
2G-byte capacity
Parallel connection up to 8 units (32
channels)
Upgraded model DC-204Ra with analog
output of 5V
Data format conforms to commercial
analysis software DADiSP/2000

HANDHELD DYNAMIC STRAINMETER

DH-14A

PC-CONTROLLED DYNAMIC STRAINMETER DC-004P

4-channel handheld use

Simultaneous sampling for 4-channel
Fastest 20kHz sampling for one channel
AA-battery driving for 6 hours at max.
Fine colour monitoring for numerical data
and waveform data
Shoulder case suitable for handheld use
is supplied.

Directly saved in PC storage, making a

long term measurement possible
Simultaneous manual, data trigger and
interval measurements.
Fastest 50kHz sampling for one channel
Simultaneous sampling of 12.5kHz for all
4 channels
L a r g e s t r a i n m e a s u r e m e n t u p t o
80,000x10 6 strain with 0.5V bridge
excitation
TEDS compatible
Control software supplied

MULTI-CHANNEL DYNAMIC STRAIN

METER DS-50A

DYNAMIC STRAINMETER
DA-17A/DA-18A Carrier type

5 0 - c h a n n e l d y n a m i c s t r a i n m e t e r
expandable to 1,000 channles (20 units)
Fastest 1kHz sampling for the 1st unit.
Enable to extend connection 100m long
at max. between units
Standard supply of software DS-750

A high frequency response of 2.5kHz

Digital sensitivity setting method
Upgraded electronic automatic balancing
Isolation of input and output
Automatic tracking method capacity balancing
Digital monitor incorporated
Dual outputs
Built-in low-pass filter
Insulation resistance check of strain bridge
DA-18A compatible with TEDS
DA-17A available for computer control
with LAN compatible carrying case

DA-17A

DA-37A

DA-38A

DA-18A

DYNAMIC STRAINMETER
DA-37A/DA-38A Carrier type

DYNAMIC STRAINMETER
DC-96A
DC type

A high frequency response of 10kHz

Digital sensitivity setting method
Upgraded electronic automatic balancing
Isolation of input and output
Automatic tracking method capacity balancing
Digital monitor incorporated
Dual outputs
Built-in low-pass filter
Insulation resistance check of strain bridge
DA-38A compatible with TEDS
DA-37A available for computer use with
LAN interface carrying case

Wide frequency response range

DC~200kHz
Digital sensitivity setting method
Upgraded electronic automatic balancing
Zero stability of 0.5106 strain/C
Usable as DC amplifier
Bridge excitation switchable in 5 steps
Dual outputs
Built-in low-pass and high-pass filters
Possible external control for balancing and
calibration signal output

DYNAMIC STRAINMETER
DC-97A
DC type

THERMOCOUPLE ADAPTOR
TA-01KT

Wide frequency response range

DC~500kHz
Digital sensitivity setting method
Upgraded electronic automatic balancing
Zero stability of 0.5106 strain/C
Usable as DC amplifier
Bridge excitation switchable in 5 steps
Dual outputs
Built-in low-pass and high-pass filters
Possible external control for balancing and
calibration signal output

For temperature measurement with DC

exciting strainmeter
Small, light weight
Unnecessary external power source
Built-in reference contact
Isolated input and output
Built-in digital linearizer
Onboard burn-out function
Measuring range
K: -50~+1000C T: -50~+300C
A p p l i c a b l e i n s t r u m e n t s : T M R - 2 2 1 ,
DC-204R, DC-204Ra, DC-004P, DH-14A

18

STRAIN MEASURING INSTRUMENTS

SB-120DG-1R2

Dynamic Measurements

BRIDGE BOX
SB-121A/SB-351A

BRIDGE BOX
SB-120B/SB-350B

1 channel bridge box for strain measurement

Quarter Bridge 2-wire (with short-circuit
bar)
Quarter Bridge 3-wire

SB-121A: 120 SB-351A : 350
Half Bridge, Full Bridge : 60~1000

1 channel bridge box for strain measurement

Quarter Bridge 2-wire
Quarter Bridge 3-wire

Opposite Half Bridge
Opposite Half Bridge 3-wire
SB-120B : 120 SB-350B : 350
Half Bridge, Full Bridge : 60~1000

BRIDGE BOX
SB-122A

BRIDGE BOX
SB-120PY

Configuration in 2,4,6,8 or 10 channels

SB-122A-2 : 2-ch., SB-122A-4 : 4-ch.
SB-122A-6 : 6-ch., SB-122A-8 : 8-ch.
SB-122A-10 : 10-ch.

Quarter Bridge 2-wire :120
Quarter Bridge 3-wire : 120
Half Bridge, Full Bridge : 60~1000

Enables post-yield measurement

S e n s i ti v i ty o f t h e m e a s u r e m e n t i s
reduced to 1/10
Configured in 2,4,6,8 or 10 channels
SB-120PY-2 : 2-ch., SB-120PY-4 : 4-ch.
SB-120PY-6 : 6-ch., SB-120PY-8 : 8-ch.
SB-120PY-10 : 10-ch.
Quarter Bridge 2-wire : 120 (with shortcircuit bar)
Quarter Bridge 3-wire: 120
Half Bridge, Full Bridge : 60~1000

BRIDGE BOX
SB-120SB-8/SB-120SB-10

BRIDGE BOX
SB-128A/SB-128A-10

8 c h a n n e l s ( S B - 1 2 0 S B - 8 ) a n d 1 0
channels (SB-120SB-10) bridge box for
strain measurement
Quarter Bridge 2-wire : 120 (with shortcircuit bar)
Quarter Bridge 3-wire : 120
Half Bridge, Full Bridge: 60~1000

8 channels (SB-128A) and 10 channels

(SB-128A-10) bridge box for strain
measurement
Quarter Bridge 2-wire : 120
Quarter Bridge 3-wire : 120
Opposite Half Bridge : 120
Opposite Half Bridge 3-wire : 120
Half Bridge, Full Bridge : 60~1000

BRIDGE BOX
SB-120DG-1R2/SB-120DG-1R3

BRIDGE BOX
SB-123A

SB-120DG-1R2
Quarter Bridge 2-wire : 120

Quarter Bridge 2-wire : 120
Quarter Bridge 3-wire : 120
Opposite Half Bridge 2-wire : 120
Opposite Half Bridge 3-wire : 120
Half Bridge, Full bridge : 60~1000

SB-120DG-1R3
Quarter Bridge 3-wire : 120

SB-120DG-1R3

QUICK CONNECTING TERMINAL

SB-OT1A

CARRYING CASE
P-A

This terminal is capable of connecting

input lead wire by merely pressing down
the knob and inserting the lead wire into
the hole of the terminal. The lead wire is
secured by the spring force of the knob.
This terminal is mounted on the input
terminal of switching box or bridge
box(SB-120SB, SB-121A, SB-122A).

One terminal is
used for one lead wire. (One set
contains five terminals).

T h e s e c a r r y i n g c a s e s a r e u s e d t o
configure multi-channel system with DA
series, and DC series units. Each is
equipped with a power switch for
simultaneous ON/OFF of all channels, a
calibration switch, and a balance button.

Computer control CARRYING

LAN interface P-AL

CASE

This is a case for setting up multi-channel

system wiith DA-17A/DA-37A series
dynamic strainmeters. Setting of
sensitivity and lowpass filter, initialbalancing, calibration and obtention of the
set values and monitor values are
possible through LAN interface from a
computer.

19

MOUNTING RACK
R-10A
JIS rack to configure a system with up to
10 units DA or DC series This rack lets
you configure a system with up to 10
channels using DA series, or DC series
units. It is equipped with a power switch
for simultaneous ON/OFF of all channels,
a calibraiton switch and a balance button.

MULTI-RECORDER TMR-200 SERIES Small Multi-channel Data Acquisition System

The multi-recorder TMR-200 series is a small multi-channel data
acquisition system enabling combination of various measuring units
according to measurement purposes. The testing objects are analog
input such as stress, load, pressure, acceleration, etc. using strain
gauges and strain gauge based transducers and digital input/output
such as CAN, etc. in vehicle onboard measurement

Voluntary combination of various sensor

input units according to purposes

Combination of a plentiful and various sensor input/output units for

strain, temperature, voltage, CAN, etc.
The maximum measurement of 80 channels
100kHz high speed sampling
USB and LAN interfaces
Vibration tolerance and small size suitable for vehicle onboard
Battery operation
Data recovery at power interruption and measurement restart at
power recovery
Various settings, monitoring and measurement result display with
the display unit

Unit ports (back)

Display unit
TMR-281
Control unit
TMR-211

Sensor input units

Systematic diagram
Strain Gauge

Combination up to 10 units
Strain Full Bridge Unit TMR-221

Display Unit TMR-281

(Setup, Monitor and measurement result, etc)

STRAIN

Strain Gauge-type
Load Cell, Acceleration, etc.

TMR-221

TML

TYPE S-2600

Strain 1G2G4G Unit TMR-222

1

A B C D E

A BD C

AC B

D EA

B C D E

A BD C

A BD C

A B C D E

A BD C

TML

Thermocouple

1G2G4G
STRAIN

TMR-222

TYPE S-399

DC Voltage

Carrier type Strain Full Bridge Unit TMR-223

AC STRAIN

TMR-223

TML

TYPE S-6320

CAN signals

GPS

CAN

Voltage/Thermocouple Unit TMR-231

F

--

TML

TYPE S-6010

Compact Flash
Memory Card

CARD

TMR-211
POWER

DC10-30V 6A MAX

TYPE S-3940

POWER

MEAS.E

ACCESS RROR

SYNCHRO

OUT

USB

LAN

CONTROL

TML

Tokyo sokki kenkyujo Co.,Ltd

Measurement Software TMR-7200

(bundled)

TMR-231

CAN/VOICE/GPS Unit TMR-251

Telemetry

Control Unit TMR-211

VOLTAGE
/TEMP.

TML

TYPE S-3980

VOL.

Voice

Personal computer
(Setup, Monitor, Measurement results,
analysis processing, etc.

MIC

CAN

CAN GPS
VOICE REC.

GPS

TMR-251

Histogram Analysis library TMR-211-01

(Optional software for TMR-211)

Telemetry I/F Unit TMR-252

ANT

ANT

ANT

ANT

TML

Digital Pulse
Signal In/Out

TELEMETRY

TMR-252

TYPE S-6020

Voltage Output Unit TMR-241

1

VOLTAGE
OUTPUT

Dynamic measurement software

TMR-7630 (option)

Recorders

Oscilloscope

TMR-241

TML

TYPE S-3970

Charge Amplifier Unit TMR-261

Piezo-electric
Charge output

Visual LOG

13

Digital indicators

TML

TMR-261

TYPE

Digital I/O Unit TMR-253

1
12V 5V 0V SIG FG

TML

TYPE S-6170

FREQUENCY / PULSE COUNT

2
3
12V 5V 0V SIG FG
12V 5V 0V SIG FG

4
12V 5V 0V SIG FG

1
H L

DIGITAL INPUT
2
3
4
H L
H L
H L

PWR
12V 0V

1
H L

DIGITAL OUTPUT
2
3
4
H L
H L
H L

DIGITA L
/

Automotive, ECU, etc.

TMR-253

20

MULTI-RECORDER TMR-200 SERIES Small Multi-channel Data Acquisition System

CF card

Monitor connecter

LAN
SYNC
USB
DC Power

Unit ports (1 to 10)

Control Unit TMR-211

Display Unit TMR-281

Possible combination of various sensor

input/output units such as strain,
temperature, voltage, CAN, etc.
Maximum 80-channel measurements
High speed sampling of 100kHz
Anti-vibration and small size to suite
vehicle onboard
Data recovery during power failure and
measurement restart functions after
power recovery
Display of monitor and measuring results
from various settings with a display unit

5.7-in. color TFT LCD touch panel display

Display of various analysis results such
as numerical monitor, wave monitor,
frequency analysis, etc.
P o s s i b l e m e a s u r e m e n t s t a r t / s t o p ,
balance control, setting to various
measurement units, etc.

Strain Full Bridge Unit TMR-221

Strain 1G2G4G Unit TMR-222

Full bridge strain measurement

8 measuring channels
Input : strain (120~1000)
Available for voltage measurement with
attenuation cable CR-4010
Measuring range
20000x106 strain (at 2V excitation)
80000x106 strain (at 0.5V excitation)

Quarter, Half and Full bridge measurement using an exclusive small bridge box
8 measuring channels
Input : strain (120~1000)
Supplied with 8 pieces of exclusive
bridge box SB-120T or SB-350T to be
selected when ordering
Measuring range
20000x106 strain (at 2V excitation)
80000x106 strain (at 0.5V excitation)

Bridge box

Carrier type Strain Full Bridge

Unit TMR-223

Voltage/Thermocouples Unit
TMR-231

Carrier wave type bridge excitation

resistive to noise
8 measuring channels
Carrier wave frequncy : 5kHz
Input : strain (Full bridge 120~350)
Measuring range
20000x106 strain (at 2V excitation)
80000x106 strain (at 0.5V excitation)

Voltage/Thermocouple measurement
8 measuring channels
Input : Voltage, Thermocouple (T,K,J)
Isolated between channels

Voltage Output Unit TMR-241

Voltage output of measured data using
other measurement units

Recorders
Oscilloscopes

8 analog output channels(BNC connector)

Optionally settable measuring channels
Possible output of addition, subtraction
and average operation results up to 4
channels

Digital indicators
Automobile ECU, etc.

TMR-251-2

[CAN] Protocol: Conforms to CAN spec.

V2.0B active
Transfer speed : 10k~1Mbps
Number of messages: 64
[GPS] Applicable receiver : TMR-251-2
[Speed measurement] 100Hz interval
[VOICE memo] Number of inputs: 1
GPS Receiver TMR-251-2
Acquisition of information on position and
time, automatic time adjustment for TMR211, etc.

Telemetry I/F Unit TMR-252

Digital I/O unit TMR-253

Connecting a Digital telemetry receiver

DT-24R
Connectable 4 units of receiver
Compatible sensor: Wheel torque transducer LTW-ND
Number of data: 8 points

[Frequency measurement and Pulse counter]

Number of inputs : 4
Maximum input voltage: 15V
Frequency response : 1Hz~100kHz
Output voltage : 5V/12V
Output current : 5V/50mA, 12V/25mA
Count range
: 0~29999 counts
[Digital inputs] Number of inputs : 4
[Digital outputs]
Trigger signal, Upper and Lower alarm,
Sampling signal (each 1 point)

Charge Amplifier Unit TMR-261

Measurement of charge output type
piezoelectric accleratometer
4 measuring channels
Charge sensitivity
0.1pC/(m/s2)~10pC/(m/s2)
Allowable
input charge : 10,000pC

21

TMR-251

CAN/VOICE/GPS Unit
TMR-251

Multi-Recorder Software Option

Histogram Analysis Library TMR-211-01
By installing the TMR-211-01 software in the control unit TMR-211, the function of a
histogram recorder can be added to the TMR-200 system.
1-dimentional histogram analysis, Peak-Valley, Maximum-Mini-
Analysis method

mum, Time-frequency, Amplitude, Level-crossing, Rainflow
Number of analyses 80 (in 1msec. sampling for any channel)
Max. 50 (100) optional setting
Number of slices
200~20,000x106 strain (effective other methods than Time-frequency)
Full scale
About 4.2 billion counts/slice
Count capacity
Ineffective amplitude 4~5,000x106 strain(effective other methods than Time-frequency)
Recording in files of histogram data (Possible filing of histogram
Filing function


data at an interval and accumulated histogram data)

Histogram Recording System using MULTI-RECORDER TMR-200 SERIES

data, in accordance with a pre-set program, and measurement data
are recorded in the form of frequency. For example, as shown in
the following chart, in a peak/valley program, the peak and valley
values of input waveforms are detected and counted in their
corresponding slice levels. There are slice levels, and the physical
quantity to be set corresponding to their width can be set optionally.
Accordingly, a histogram of measurement results obtained for a
long period of time can be produced quickly enough.

5
4
3
2
1
1
2
3
4
5

Frequency

Slice level

For precise understanding of various phenomena that change with

t i m e, i t i s i m p o r t a n t t o k n o w n o t o n l y w ave f o r m s o f e a c h
phenomenon but their frequency distribution and correlation. The
Multi-Recorder TMR-200 Series is also available for measuring the
frequency distribution of a phenomenon with optional software
Histogram Analysis Library TMR-211-01, i.e. histogram, by digitally
processing analog data sent from a strain gauge and transducer.
The digital processing is carried out simultaneously with input of

: Peak

Fatigue life prediction

It is well known that the majority of structures involve par ts

subjected to cyclic loads, resulting in structrural failure, and such
failure includes a correlation between stress and cycles. A random
stresses usually take place in str uctural par ts of vehicles,
machinary and architecture. Understanding of failure mechanism
due to such stresses as above is very important. For cyclic
stresses in random, fatigue failure is typically characterized with the
processed stress amplitude and its cycles by the Rain-flow
counting method.

Fatigue damage

Vibration and impact levels of

running freight container
TMR-200

Stress amplitude

Measured data (Peak, Valley

Measurement of behavior of structures

Outdoor structures such as steel towers are under various
influences caused by weather conditions. By using appropriate
sensors and the multi recorder TMR-200, histogram data can be
obtained not only for stress of structural members and tensional
force and vibration of wires but also for direction and velocity of
wind, temperature, etc. Data arranged in a form of histogram
are obtained for microtremors under normal condition, maximum
tensile stress and vibration under strong wind, etc. It is effective
in f inding behavior of str uctures in their actual wor king
conditions.
Peak/Valley method, Time method, Amplitude method
Vibration, tension by wind
Frequency

Histogram recording in applications

: Valley

TMR-200
Quantity

FREQUENCY ANALYSIS
A frequency analysis of the TMR-200 series is ready for the followings.
Peak/Valley method, Maximum/Minimum value method, Amplitude method, Time method, Level crossing method, Rain-flow counting
method

RAIN-FLOW COUNTING method

Three conditions of stop of flow

1. Rain drop which flows to the right stops when peak of valley appears left
than the strating point.
(122456789101012

5
4
3
2
1
0
1
2
3
4
5

Slice level

In analyzing signal wave by Rainflow method, take the vertical axis for time
axis and the horizontal axis for strain signal. Connect the point of peak
and valley of signal wave continuously, and consider the lines between
each peak and valley and valley and peak as multiple roofs and imagine
that rain drop flows from each peak or valley to lower direction along the
roof. Assume that the flow of rain drop will be stopped when one of three
conditiions described below is applicable, and measure the horizontal
distance of the flow till stop and calculate the strain amplitude to be
counted.

12

Cell No.
2 2
3
1

6
5 5

10 10

7 7

11
9

13

Count data

10

2. Rain drop which flows to the left stops when peak or valley appears right
than the starting point.

(0123455'77910111213)
3. Two drops do not flow along one roof at the same time, and the first
starting drop has a preference. When a following drop meets the flow of
the first drop, the following drop stops.

(32'65'87'1110')

22

TELEMETRY SYSTEM
DIGITAL TELEMERY SYSTEM
DT-041T/DT-041R-1 315MHz

DIGITAL TELEMERY SYSTEM

DT-031T/DT-031R
315MHz

Radio frequency range of 315MHz

(Extremely low power radio station)
Maximum 80-channel measurements

Radio frequency range of 315MHz

(Extremely low power radio station)
Easy measurement data file in combination with TMR-200 series

Digital Telemetry Transmitter DT-041T

Transmission of strain data and the
transmitter's supply voltage data
Small and lightweight
Driving by induced power supply (Option)
Digital Telemetry Receiver DT-041R-1
(Voltage output type)
Outputs measurement data to recorder,
etc.
Small (48(W)100(H)21.5(D)mm)

Transmitter
DT-041T

Transmitter
DT-031T

Receiver
DT-031R

Receiver
DT-041R-1

DIGITAL TELEMERY SYSTEM

DT-121T/DT-181R
2.4GHz

Transmitter
DT-121T

Receiver
DT-181R

2.4GHz band low-power wireless data

communication system.
5kHz sampling
Selectable measurement ranges among
5000, 10000 and 25000 x10-6 strain
to be specified ordering.
The voltage output of strain is fixed. No
need of calibration.
Long communication distance, and easy
setting.
Transmitter DT-121T
The antenna is built in the transmitter
Power save function provided
Small(45(W)11(H)31(D)mm)
Receiver DT-181R
Voltage output type

Receiver
DT-031R-1
(Voltage out
put)

TELEMETRY SYSTEM
TT-91/TR-90/TR-87

Receiver
TR-90

Receiver
TR-87

Transmitter
TT-91

Digital Telemetry Transmitter DT-031T

Transmission of strain data and the
transmitter's supply voltage data
Small and lightweight
Driving by induced power supply (Option)
Digital Telemetry Receiver DT-031R
Onboard TMR interface for setting up a
system with TMR
Small (48(W)100(H)21.5(D) mm)
Digital Telemetry Receiver DT-031R-1
(Voltage output type)
Outputs measurement data to recorder,
etc.

TT-91 Transmitter
Small and lightweight
No user licence reuired due to the use of
extremely low power radio wave
Measurement with good S/N ratio due to
the use of FM wave.
TR-90 Receiver
100V ac and 12V dc operation
E asy channel distinction due to digital
display of usage frequency
Output voltage indicated by digital value
and analog meter
L ED display of receiving signal level Easy monitoring of receiving condition
TR-87 Receiver (Produced on order)
Dimension of business card size

INDICATOR

23

DIGITAL INDICATOR
TC-31M

DIGITAL LOAD METER

TC-31L

Designed for strain gauge based transducers

Compatible with flash memory card of 32
64/128MB
A s l e e p i n t e r v a l f u n c t i o n t o m a k e
unattended operation possible
Battery drive available in field site
Drip-proof construction (IP54)
Lightweight of 800 gr. and easy field use

Small and easy to carry

Drip-proof construction (IP54)
Peak-hold function provided
Simultaneous display of monitor and
peak value
Data memory for maximum 4000 counts
One-touch connection of transducer
cable
Compatible with flash memory card of 32
64/128MB
Control and data transfer via RS-232C

DIGITAL INDICATOR
TD-23L

DIGITAL INDICATOR
TD-30L

Excellent accuracy and stability

A least resolution of 0.0110-6strain
Possible remote sensing method
Possible Pt RTD measurement (Option)
High bright color LCD (5.7 inches 320
240 dots) available in both Japanese and
English
Interface: RS-232C and LAN

Excellent accuracy and stability

The least resolution of 0.01X10-6 strain
I n f o r m a t i o n o n e i g h t s e n s o r s a r e
registered
Possible remote sensing
Automatic condition setting by TEDS
Interface: RS-232C and LAN

DIGITAL INDICATOR
TD-97A

DIGITAL INDICATOR
TD-95A

Color liquid crystal display and touch

panel operation provide clear indication
and easy handling.
One of three display of comparison, hold,
and graphics is selectable
Various options are available such as
RS-232C communication interface,
RS-485 communication interface, D/A
converter.
Equivalent Input calibration makes easy
calibration by inputting the rated value of
a sensors by touching the display.

Direct digital display of physical quantity

in 19999
High/low limit function
Secure and easy setting with TEDS
Equivalent signal input function provided
- Easy sensitivity adjustment without real
load
DIN conforming design suitable for
mounting on testing devices.
BCD, RS-232C and D/A output (Factory
installation option)

STRAIN CALIBRATORS
Automatic calibrator
CBA-3308A

Automatic calibrator
CBA-2310A

8-channel simultaneous calibration

Isolated among channels
Computer control available
Wide calibration range
High resolution
Excellent stability
Generation of dynamic phenomena in
quarter bridge and full bridge method,
DC voltage mode

Caibration of 10 channels simultaneously

for static and dynamic strainmeters, and
switching boxes
Computer control available
Generation of dynamic phenomena in
full bridge method, and DC voltage
mode
High resolution
Excellent stability

Strain Calibrator
CBM-122A/CBM-352A

Strain Calibrator
CBM-123A/CBM-353A

Operation check and sensitivity calibration

of strainmeters
Bridge resistance
CBM-122A : 120

CBM-352A : 350
Applicable Bridge configuration
Full bridge

Operation check and sensitivity calibration

of staitic straionmeters and switching
boxes
Bridge resistance
CBM-123A : 120

CBM-353A : 350
Applicalbe to DC bridge excitation
Applicable Bridge configuration
Quarter, Quarter 3-wire, Half, Full bridge

Strain Calibrator
CBM-131A

Strain Calibrator
CB-2R

Full bridge strain calibrator for static and

dynamic strainmeters
Input bridge resistance 120 and 350
Bridge excitation available in both
constant voltage and constant current.
Possible computer control (via RS232C)
High resolution (max. 1/100000, max.
0.110-6 strain)

Sensitivity calibration and zero shift

monitoring of strainmeters
Bridge resistance : Either 120 or 350
Two calibration values generated
Applicable Bridge configuration
Quarter, Quarter 3-wire, Half, Full bridge
Applicable to DC bridge excitation

MATING CONNECTORS
NDIS Push-Pull Circular Connector Plug and Jack
Plug
PRC03-12A10-7M
Jack
PRC03-32A10-7F

NDIS Connector Flange Mount Receptacle

Receptacle
PRC03-21A10-7F

Jack
TC1108-32A10-7F

BNC T-Type Adapter JPJ

T-Type adapter JPJ to branch signals of
BNC outputs from dynamic strainmeter.

BNC T-Type Adapter JJJ

T-Type adapter JJJ to branch BNC
connector plug in two outputs

B ulkhead mount receptacle for combination use with NDIS Push-Pull

circular connector plug that allows input
of transducer's signals.
Applied to Switching Boxes,

Waterproof Circular Connector Plug and Jack

Plug
TC1108-12A10-7M

Adapter for interconnection of two BNC

connectors plugs with easy-to-use
bayonet lock system

Flange mount receptacle for combination use with NDIS Push-Pull circular
connector plug that allows input of
transducer's signals.
Applied to dynamic strainmeter series
DRA, DA and DC.

NDIS Connector Bulkhead Mount Receptacle

Receptacle
PRC03-23A10-7F

BNC Adapter JJ

Universal coaxial connectors 7-pin plug

and jack with a single pull or push motion
A pplied to strain gauge transducers,
switching boxes, extension cables of
transducers, instruments, etc.

Universal coaxial connectors 7-pin plug

and jack with built-in compact and tight
waterproofing mechanism of screw
coupling
A pplied to Input/Output cable and
supplied cables of transducers

Miniature Connector plug for DC-204R and TMR-221

Plug
PRC07-P8M

Miniature connector plug applied to

Smart dynamic strain recorder DC-204R,
Multi-Recorder Control unit TMR-221

Waterproof Connector Bulkhead Mount Receptacle

Receptacle
TC1108-23A-10-7F

B ulkhead mount receptacle for combination use with Waterproof circular

connector plug that allows input of
transducer's signals.
Applied to body of load cells, pressure
transducers.

24

AUTOMOTIVE MEASURING SYSTEM

Frictional Torque Transducer

Axial Force Strain Transducer

Steering Torque Transducer

HLA-50A
HLB-50A

(digital telemetry type)

FGDH-1B/FGDH-2A

FGAH-1A

By attaching the transducer to passenger car steering

column, driving torque is measured.
Possible installation on various types of car
(Steering outer-diameter: 330~380mm for HLA-50A)
Easy installation and removal
Excellent operability
Steering torgue detected by strain gauges
Torque output by digital telemetry (HLA-50A)

Measures tensile force on steering tie-rod

With built-in frictional strain gauge, no
bonding is required.
Easily mounted on an existing rod without
detaching it
Applicable rod : 10~20mm
Size : 52mm x 35mm, Weight : 55g.

Braking Pedal Force Transducer MLA-NA

Measures brake pedal force
E a s i l y a t t a c h e d w i t h o u t
modifying the pedal.
Thin construction, Light weight
Less measurement error due
to pedal position

With built-in frictional strain gauge, no

bonding is required.
Telemetry transmission incorporated.
Not affected by noise due to the use of
digital telemetry.
Easily mounted on a drive shaft
Applicable diameters of drive shaft
20~30mm
FGDH-2A is equipped with chargeable
battery

Wheel Alignment Displacement Transducer

WAD-1B

Wheel Torque Transducer

(slip-ring type / digital telemetry type)

By installing with the 6-Component Wheel Force

Transducer (SLW series), the Wheel Alignment
D i s p l a c e m e n t Tr a n s d u c e r c a n m e a s u r e t i r e
displacement in three orthogonal directions passed
from a road surface while driving, as well as camber
angle and steering angle.

LTW-ND Digital telemetry type

LTW-NA Slip-ring type
Driving torque and braking torque of a real car can be
measured in analog.

(slip-ring type / digital telemetry type)

SLW-NC Slip-ring type

SLW-ND Digital telemetry type
SLW-NE Digital telemetry and High accuracy type

Tie-rod loadcell TCLT-NA

Easy installation using connection
thread between tie-rod and tie-rod
end
3 types of thread making installation on various tie rods possible
6 kinds of combination of thread
and capacity avaialble

25

6-Component Wheel Force Transducer

The signals sent from the 6-Component Wheel Force Transducers (SLW
series) attached to the axle shafts are amplified by the exclusive force
analyzer (MFT series) to be converted into digital values. The digitalized
measurements are used to perform real-time computational correction
for the crosstalk correction between component forces, the rotation
correction to cancel the rotational influences on the sensor, and the
moment position correction, which allow the front/back (Fx), right/left
(Fy), and up/down (Fz) loads and each component force's torque (Mx,
My, Mz) to be output in analog form or to be recorded in the CF card.
The digital telemetry model has been newly added to the line up so you
can build a wireless all-in-one system when used with the exclusive
receiver.

AUTOMOTIVE MEASURING SYSTEM

6-Component Wheel Force Measuring System
The 6-Component Wheel Force Measuring System is comprised of
the 6-Component Wheel Force Transducer and the exclusive
6-component force analyzer. Depending on how the 6-component
force is detected, there are two types available, slipring type and

digital telemetry type. The slip-ring 6-Component Wheel Force

Measuring System is the combination of the 6-Component Wheel
Force Transducer SLW-NC and the 6-Component Force Analyzer
MFT-306 or MFT-306R.

SLIP-RING TYPE

6-Component Wheel Force Transducer SLW-NC

Measurement Software supplied
MFT-7306

Fx, Fy, Fz: 20kN/30kN

Mx, My, Mz: 3kN-m/6kN-m

High stability
Light weight
Possible installation to various vehicles using exclusive rim and hub adaptor
Easy fixture to a real car
Waterproof construction making driving in the rain possible

Miniature 6-Component Force Analyzer MFT-306

Miniature 6-Componennt Force
Analyzer MFT-306

Small and lightweight - Reduction of installation area

High-speed operation of crosstalk and rotation correction, etc.
6-component force data, tire rotation count signal output in voltage form
Forward and backward measurement possible with the encoder
6-Component Wheel Force Transducer characteristics data set by PC
Up to 4 units controllable

CF card recording 6-Component Force Analyzer MFT-306R

CF card recording
6-Componennt Force Analyzer
MFT-306R
6-Component Wheel
Force Transducer
SLW-NC

DIGITAL TELEMETRY TYPE

6-Component Wheel Force

Transducers SLW-ND and
SLW-NE (High accuracy)

High-speed operation of crosstalk, rotation correction.

6-component force data, tire rotation count signal output in voltage form
Forward and backward measurement possible with this encoder
6-Component Wheel Force Transducer characteristics data set by PC
Up to 4 units controllable
Data from start-to-stop are recorded in a CF card
Synchronous recording of up to 4 units. When combined with a DC-204R
synchronous measuring of up to 8 units

6-Component Wheel Force Transducer SLW-ND-A/-B

Fx, Fy, Fz: 20kN/40kN

Mx, My, Mz: 4kN-m/8kN-m

Fx, Fy, Fz: 20kN

Mx, My, Mz: 3kN-m

High-accuracy type SLW-NE-A/-B

No supporters and cables outside the passenger car - Safe car driving
Signals from the 6-Component Wheel Force Transducer received wirelessly
in the car, requiring no cables routed inside and outside the car
Wheel alignment displacement transducer WAD-1B can be used with SLWND-A/-ND-B (having rotary encorder for angle detection).
Installable into every passenger car type using the exclusive rim and hub
adapter
AA batteries used. Use of secondary batteries also possible

6-Componennt Force
Analyzer MFT-306T

Digital-telemetry type 6-Component Force Analyzer MFT-306T

Telemetry receiver DT-24R
Small and lightweight - Reduction of installation area
High-speed operation of crosstalk, rotation correction.
6-component force data, tire rotation count signal output in voltage form
Measurement data transferred wirelessly by built-in telemetry
Up to 4 units controllable
Telemetry Receiver applicable inside, easy to secure cables
Control software MFT-7306T supplied

Telemetry Receiver
DT-24R

Wheel Alignment Measuring System

The Wheel Alignment Measuring System is composed of WAD-1B
Displacement Transducer and its exclusive Measuring Equipment
WAM-1A. By installing to the 6-componennt Wheel Force Transducer
it can measure 3 orthogonal force components applied on a tire

during running and surrounding 3 moments. Not only 3-directional

displacements of wheel center but steering angle and camber angle
can be measured at the same time. Measurement results are output
in voltage in real time by 2 vehicle onboard measuring equipment.

Wheel Alignment Measuring Equipment WAM-1A

Wheel Alignment Measuring

Equipment WAM-1A

Small and lightweight - Reduction of installation area

Possible setting of alignment transducer data and measuring equipment by
computer.
Bundled control software WAM-701A
Simultaneous control of maximum 4 units

Wheel Alignment Displacement Transducer WAD-1B

Measures displacements of wheel center in orthogonal 3 directions
Steering angle
Camber angle

Wheel Alignment
Displacement Transducer WAD-1B

26

AUTOMOTIVE MEASURING SYSTEM

Wheel Torque Measuring System
The Wheel Torque Measuring System can measure the drive torque
and braking torque while driving, in analog output form. The slip-ring/
encoder built-in type, which incorporates an encoder, can also
measure rotation speed. The model incorporating a miniature
transmitter is lightweight and has almost no projections and so can

take measurements without disturbing driving conditions. And the

digital telemetry built-in type can measure drive torque and braking
torque, and the output is taken out from the vehicle onboard
telemetry receiver DT-24R, while passenger car driving.

SLIP-RING/ENCODER BUILT-IN TYPE

The Slip-ring/Encoder buit-in type Wheel Torque Measuring System, which is
composed of the Wheel torque transducer LTW-NA to measure drive/braking
torque, and Dynamic strainmeter, or Multi-Recorder, can measure torque with
analog output by being connected to the included slipring and Dynamic
Strainmeter. The slip-ring, which incorporates an encoder, allows rotation
speed to be measured if connected to Digital I/O unit TMR-253 to count output
pulses. The use of the exclusive rim and hub adapter allows installation into
any type of passenger car.

Multi-Recorder TMR-200
series
Display unit TMR-281
Control unit TMR-211

Voltage/Thermocouple unit
TMR-231
Digital I/O unit TMR-253

Wheel Torque Transducer LTW-NA

2.5kN-m

Lightweight, almost the same weight as ordinary passenger car wheel

Watrproof construction making running in the rain possible
Possible installation to various vehicles using exclusive rim and hub
adaptor

Multi-Recorder TMR-200 series

Control Unit TMR-211

Display unit TMR-281
Voltage/Thermocouple unit TMR-231
Digital I/O unit TMR-253
Torque measurement with analog output using combination of the built-in
slip-ring and Voltage/Thermocouple unit TMR-231
Rotation speed measurement using combination of the built-in encoder and
Digital I/O unit TMR-253

Slip-ring/Encoder built-in type

Wheel Torque Transducer
LTW-NA

DIGITAL TELEMETRY TYPE

Telemetry Receiver
DT-24R

Multi-Recorder TMR-200
series

Display unit TMR-281

Control unit TMR-211
Telemetery I/F unit TMR-252

The Digital Telemetry type Wheel Torque Measuring System is

composed of a torque transducer LTW-ND to measure drive torque and
braking torque, and onboard telemetry receiver DT-24R, during driving
car. In torque transducer, a miniature telemetry transmitter is built in to
transfer the digital data to the receiver installed in the passenger car.
This system is small with very small projection and so can perform
measurements without disturbing driving conditions; it is also cordless
and so can be organized compactly. The use of the exclusive rim and
hub adapter allows installation into any type of passenger car.

Wheel Torque Transducer LTW-ND

2.5kN-m/5kN-m

Small - Regular wheel size or equivalent

Small projection
Measurement in the rain is possible because of the waterproof structure
Open structure helps release braking heat

Digital Telemetry type

Wheel Torque Transducer

LTW-ND

Easily make the change to slip-ring measurement as well

Measurement with the standard offset possible for any car type using the
special rim and hub adapter

Multi-Recorder TMR-200 series

Control Unit TMR-211
Display unit TMR-281
Telemetry I/F unit TMR-252

Telemetry Receiver DT-24R

Wireless data reception possible in the car is possible, requiring no wiring
from the outside to the inside of car.

27

SPECIAL PURPOSE MEASURING SYSTEM

TML Small Falling Weight Deflectometer System FWD-Light
TML small FWD - Falling Weight Deflectometer - FWD-Light is used for
estimating construction of pavement or rigidity of subgrade.
Excellent portability and enables simple and quick measurement of
coefficient of subgrade reaction.
Two measurement method are offered with our original 2-wire digital line
measurement system and wireless measurement system.

FWD-Light is a registered trademark of Tokyo Sokki Kenkyujo Co., Ltd.

2-wire digital line measurement system

FWD-Light
Main body
KFD-100A

Interlocking block pavement

Exclusive
Indicator
TC-351F

External Dispalcement
Sensor KFDS-1B

Wireless measurement system

Wireless
FWD-Light
Main body
KFDT-100A

Grip with builtin level and

antenna
Controller ZT-121F
Controller ZT-120F
and USB cable

External Dispalcement
Sensor KFDST-1A
Railroad embankment

Wireless measurement

Crack Detection Sensor

Cracks developed on the surface of concrete structures due to
deterioration and damage can be easily and accurately found even in
high or dark places. The sensor is bonded onto a concrete structure
and the optical fiber cable set to a visible light source. When cracks
occur, the optical fiber are disconnected, the light leaks and emits to
enable you to recognize the occurrence and position of cracks.

KZCA-A
Optical fiber and
FC connector supplied

Easy to find out cracks - No exclusive knowledge about management and

control of structures is required for a checker
The luminescence of the sensor indicates the generation of cracks.
Crack width detection accuracy : To be selected among

0.05mm/0.1mm/0.2mm/0.3mm

A commercial
light source

Crack detection length : 300mm or 500mm

KZCB-A for Automatic Crack Detection System

Detection Sensor Adaptor
KZCBF-11 at option

Optical fiber and

FC connector supplied
A detection point lighten where crack generates.

28

MEASUREMENT SOFTWARE Visual LOG

Visual LOG is a registered trademark of Tokyo Sokki Kenkyujo Co., Ltd.

Data Logger use Static Measurement Software TDS-7130v2

The TDS-7130v2 is general purpose static measurement software for
controlling our data loggers, data monitoring and data acquisition, and it is also
powerful tool for presenting a report including data and graphics.
-- Windows Vista(32),7(32/64), 8(32/64)
Function : Rectangular rosette analysis, Numerical operation, Trigonometric, etc.
Maximun number of Data Items : 4000items (including computation results)
Total number of measurements 5000 measurements
Various automatic measurements are possible
Applicable instruments
Data Logger TDS-630/TDS-530/TDS-150
Multi-channel Digital Strainmeter DRA-30A (on static mode)
TML-NET Interface NIF-100
TML-NET Use Handheld Strainmeter TC-35N

DRA model use Dynamic Measurement Software DRA-7630

The DRA-7630 is software for processing data and measuring dynamic
phenomenon using up to 10 units (100 channels) DRA-101C and DRA-107A
digital dynamic strainmeter. Multi-channel Digitral Strainmeter DRA-30A is also
available up to 10 units (300 channels). Maximum operation items are 1000
points.
-- Windows Vista(32),7(32/64), 8(32/64)
Data monitorings with various styles are possible.
Graphics in versatile formats including spectrum graphs are possible.
Text file conversion of data is compatible with CSV or DADiSP format
Function : Rectangular rosette analysis, Numerical operation, Trigonometric,
etc.
Operation items are up to 1000
Performs a unified control of condition settings and data
Applicable instruments
Digital Dynamic Strainmeter DRA-101C/DRA-107A (Up to 10 units, 100
channels)
Multi-channel Digital Strainmeter DRA-30A (Up to 10 units, 300 channels)

DC-204R model use Dynamic Strain Recorder Measurement Software DC-7630

The DC-7630 is specially designed for Smart Dynamic Strain Recorder DC-204R
and DC-204Ra, processing data and measuring dynamic phenomenon using
upto 8 units (32 channels). Also, it features simultaneous measurement, realtime
wave monitoring during sampling. The data is compatible with CSV and DADiSP
format.
-- Windows Vista(32),7(32/64), 8(32/64)
Data monitorings with various styles are possible.
Graphics in versatile formats including spectrum graphs are possible.
Text file conversion of data is compatible with CSV or DADiSP format
Function : Rectangular rosette analysis, Numerical operation, Trigonometric, etc.
Operation items are up to 1000
Performs a unified control of condition settings and data
Applicable instruments
Smart Dynamic Strain Recorder DC-204R (Up to 8 units, 32 channels)
Smart Dynamic Strain Recorder DC-204Ra (Up to 8 units, 32 channels)
Option
DC-7630-M (Synchronous retrieval of motion images and data)
Measurement and storage of motion images with DirectX compatible are made
together, and the recorded measurement data and images can be
synchronously retrieved.

29

MEASUREMENT SOFTWARE Visual LOG

Visual LOG is a registered trademark of Tokyo Sokki Kenkyujo Co., Ltd.

Multi-Recorder Measurement Software TMR-7630

The TMR-7630 is software for processing data and measuring dynamic
phenomenon using up to 10 units (80 channels)


-- Windows Vista(32), 7(32/64), 8(32/64)
Data monitorings with various styles are possible.
Graphics in versatile formats including spectrum graphs are possible.
Text file conversion of data is compatible with CSV or DADiSP format
Function : Rectangular rosette analysis, Numerical operation, Trigonometric, etc.
Operation items are up to 1000
Performs a unified control of condition settings and data
Applicable instruments
Multi Recorder Control unit TMR-211 (Up to 10 units, 80 channels)
Option
TMR-7630H (Frequency analysis)
Frequency analysis and S-N analysis of the measured dynamic waveform are
possible by post processing.
TMR-7630-M (Synchronous retrieval of motion images and data)
Measurement and storage of motion images with DirectX compatible are made
together, and the recorded measurement data and images can synchronously
be retrieved.

Dynamic Strain Measurement Waveform Display Software WF-7630

The WF-7630 is software for displaying measurement data of DADiSP, which
are output by TML Dynamic strainmeters and dynamic strain measurement
software. As the recorded data are raw data measured by such dynamic
strainmeter, it is possible to change the coefficient by displaying the data or to
carry out recalculation of measurement data such as resetting of expanded
channel.
-- Windows Vista(32), 7(32/64), 8(32/64)
Applicable instruments data
Smart Dynamic Strain Recorder DC-204R/DC-204Ra,
Handheld Dynamic Strainmeter DH-14A
Multi-Recorder TMR-211
Applicable data file
DADiSP file of INTEGER and ASCII format output from dynamic measument
software DC-7204/TMR-7200/DRA-730AD/DC-7630/DRA-7630/TMR-7630/
DC-7004P

Monitoring Measurement Software Visual LOG Light

The Visual LOG Light is control software for monitoring measurement using
our static strainmeters.
-- Windows Vista(32), 7(32/64), 8(32/64)
Time Interval measurement is possible
Direct writing to a worksheet of Excel is possible
Interface : LAN/USB/RS-232C/GP-IB
Applicable instruments
Data Logger TDS-530/TDS-150
Handheld Data Logger TC-32K
Network(TML-NET) Use Handheld Strainmeter TC-35N

30

Approval Certificate ISO9001

Design and manufacture of
strain gauges, strain measuring
equipment and transducers

8-2, Minami-ohi 6-chome, Shinagawa-ku, Tokyo 140-8560, Japan

TEL: Tokyo +81-3-3763-5614 FAX: Tokyo +81-3-3763-5713
email address: [email protected]