Ultima: X Series Gas Monitors

Ultima X Series Gas Monitors
[Ultimate Features. . . EXtreme Design ]
SIL-2 d
e
Certifi

MSA's Ultima X Series Gas
Monitors are microprocessor-based
transmitters, engineered with the
customer in mind.
The latest mechanical and electrical technologies offer a
state-of-the-art design for any gas detection need. The
Ultima X Series Gas Monitors, available in both stainless
steel and polycarbonate enclosure housings, provide
continuous monitoring of hazardous gases.
Advanced sensing technologies monitor against the threat
of combustible and toxic gases and for oxygen deficiency,
utilizing catalytic, electrochemical and infrared gas
detection methods.
Installation and Operation
X Factors
1
MSAs patented feature allows for sensor change-out

without declassifying a hazardous area.
Are available for remote sensing applications, where

installations require the sensor to be separated from
the electronics.
Can operate completely stand-alone with a large
LCD display, optional quick-check LEDs and
four relay outputs (three alarm and one fault), or
connected with a standard 4-20mA output to a
control system (PLC, DCS, etc).
Has adjustable full-scale range
Provide for easy installations with the two-piece,
field-wiring connectors.
Calibration
As with all gas monitors, Ultima X Series Gas Monitors
must be calibrated periodically with the gas of interest to
ensure proper operation. The calibration process offers:
Easy-to-follow calibration instructions
displayed on monitor
Automatic adjustments
Date stamping
Selectable lockout of output signal during
calibration
Ability to calibrate at the installation location, or
remotely without systems interruptions (using
another base unit)
No need to open the enclosure during set-up and
calibration when using accessory calibrator, controller
or pushbutton
Interchangeable Smart Sensors

Pre-calibrated sensor modules are ready for
installation out of the box. Sensors can be replaced
in the field without the use of tools. The unit quickly
recognizes the new sensor type and reconfigures
alarm and relay settings to optimize the new sensor.
State-of-the-Art Display
Liquid crystal display conveniently alternates
between sensor reading and gas type and features
scrolling messaging, indicating ongoing diagnostic
checks such as sensor "end-of-life" condition.
Installation is both simple and flexible. The

Ultima X Series Gas Monitors:
Operate in diffusion mode, with factory-calibrated
sensors ready to perform immediately after installation.
Sensor Disconnect Under Power
World-Class Design
Engineering efforts feature a single-board design for
ultimate reliability and serviceability. The multipleentry mounting enclosure has been designed to be
separate from the electronics and sensor, allowing
for problem-free installation and servicing.
Onboard LEDs and Relays

Optional "quick-check" LEDs and four relay outputs
allow for increased indication of alarm and fault
conditions. Quick-check" LEDs, viewable from afar,
indicate NORMAL (green) and ALERT (red) status
conditions. Field-programmable alarm levels and
normally energized/de-energized, normally
opened/closed and latching/non-latching relay
functions offer three levels of alarm and a fault.
With a number of new and exciting features, the

Ultima X Series Gas Monitors are suitable for
indoor and outdoor applications in virtually any type
of industry including offshore, refineries, chemical
and petrochemical facilities, steel mills, water and
wastewater plants, mining, and general industry.
Ultima X3 Technology
[ X to the Power of 3 ]
PLC/DCS
[ProSoft-Tested]
Connect the X3 unit to
PLC/DCS control systems.
The X3 technology is
ProSoft-Certified. It has
been tested and found to
be compatible with AllenBradley PLC/ModBUS
connectivity by ProSoft
Technology, Inc.
Up to 3000 ft.
Ultima X3 Technology for the Ultima X Series Gas Monitors features:

Multi-sensing
A system can handle up to 31 monitors with up to 3 sensors inputted per monitor for a total
of 93 sensors
Any combination of electrochemical-, catalytic-, and infrared-type sensors are available
Scrolling display monitor scrolls through type and reading for all sensors attached
The Ultima X3 Monitor operates as a slave device on the network
Signal boost
Each sensor can be observed remotely up-to 3000ft. from the monitor
Universal 85-256VAC or 7-30VDC power supply available at remote condulet
ModBUS RTU Output
Industry-standard format
Provides an RS-485 half-duplex communication interface
Integration into PLC/DCS systems
Accessories
Power Supply
The Ultima X external power supply can power sensors remotely.
Internal power supply option is also available. One remote power supply
module can power:
Up to 5 electrochemical or oxygen sensors.
Up to 3 Combustible sensors
Pushbutton
The pushbutton allows the user to view various functions without the use
of the calibrator. The pushbutton allows the user to:
Acknowledge Alarms
Initialize Zero Calibration
Initialize SPAN Calibration
Initialize iCAL Calibration
Abort Calibration
Duct-Mount Kit
The Duct Mount Kit allows the user to monitor air within ductwork
using the Ultima XE, XA or XIR sensor. A quick-disconnect fitting
enables the calibration gas to reach the sensor without having to
remove the duct-mounted sensor.
Pump
Sampling pumps are available to bring a remote sample to a sensor.
The sampling modules are available in GP and XP versions of aspirated
and pumped modules.
Calibrator
The Ultima Monitor Calibrator offers the industrys simplest method of
calibration, an easy-to-use three button device that allows calibration
and address-change of the Ultima X Series Monitor.
Controller
The Ultima Monitor Controller provides complete access to all features
through its full-function keypad. It offers the ability to set alarm levels,
change span gas values and display date of last calibration.
[ Ultimate Features. . . EXtreme Design ]

Ultima XE Gas Monitor Explosion-Proof Stainless
Steel Gas Detector with Display
The Ultima XE Gas Monitor offers:
316 Stainless steel
Multiple-entry mounting enclosure
Ultima XA Gas Monitor Water- and CorrosionResistant, All-Purpose, Polycarbonate Gas Detector
with Display
The Ultima XA Gas Monitor offers:
Nema 4X rating
Light-weight (Only 1.5 lbs)
Ultima XIR Gas Monitor Explosion-Proof

Stainless Steel, Infrared Gas Detector with Display
The Ultima XIR Gas Monitor offers:
316 Stainless steel
Multiple-entry mounting enclosure
Fast response time
Operation based on dual-wavelength, heated-optics technology,
providing definitive compensation for temperature, humidity

and aging effects
IR technology which offers excellent long-term stability, eliminating
the need for frequent calibrations
A sintered-disk-free design for optimum performance in harsh
environments
No-gas calibration. A zero adjustment is all that is required for full
calibration.
IP67 Rated protected from temporary immersion in water
Specifications (for Ultima XE, Ultima XA and Ultima XIR)
Gases
Gas Types
Acetylene IR- 0-2.5%

Ammonia- 0-50 PPM
Ammonia- 0-100 PPM
Ammonia- 0-1000 PPM
Arsine- 0-2 PPM
Bromine- 0-5 PPM
Carbon Dioxide IR- 0-0.5%
Carbon Dioxide IR- 0-2%
Carbon Dioxide IR- 0-5%
Carbon Monoxide- 0-100 PPM
Chlorine- 0-5 PPM
Chlorine- 0-10 PPM
Chlorine- 0-20 PPM
Chlorine Dioxide- 0-3 PPM
IR Combustible Gas - Methane0-100% LEL
IR Combustible Gas - Non Methane0-100% LEL
Combustible Gas- 0-100% LEL Natural
Gas and H2
Combustible Gas- 0-100% LEL
Petroleum Vapors
Combustible Gas- 0-100% Solvents
Diborane- 0-50 PPM
ETO- 0-10 PPM
Flourine- 0-5 PPM
Germane- 0-3 PPM
HF- 0-10 PPM
Hydrogen- 0-1000 PPM
Hydrogen Chloride- 0-50 PPM
Hydrogen Cyanide- 0-50 PPM
Hydrogen Sulfide- 0-10 PPM
Hydrogen Sulfide - solid state0-100 PPM
Nitric Oxide- 0-100 PPM
Nitrogen Dioxide- 0-10 PPM
Oxygen- 0-10% - compensated
Oxygen- 0-25% - compensated
Oxygen - CO2 Tolerant- 0-25%
Oxygen - Solvent Tolerant- 0-25%
Phosgene- 0-1%
Phosphine- 0-2 PPM
Silane- 0-25 PPM
Sulfur Dioxide- 0-25 PPM
Sulfur Dioxide- 0-100 PPM
Note: This Data Sheet contains only a general
description of the product shown. While uses
and performance capabilities are described,
under no circumstances should the product be
used except by qualified, trained personnel, and
not until the instructions, labels or other
literature accompanying the product have been
carefully read and understood and the
precautions therein set forth followed. Only they
contain the complete and detailed information
concerning this product.
ID 07-2051-MC / Aug 2006

MSA 2006 Printed in U.S.A.
Instrument Division:
P.O. Box 427, Pittsburgh
PA 15230 U.S.A.
www.MSAgasdetection.com
In U.S.:
Phone: 1-800-MSA-INST
Fax: 1-724-776-3280
In Canada:
Phone: 1-800-MSA-INST
Fax: 1-905-238-4151
In Mexico:
Phone: 52 55 21 22 5770
Fax: 52 (5) 3 59 43 30
MSA International:
Phone: 412-967-3228
Fax: 412-967-3373
XE, XA
XIR
Combustibles, oxygen and toxics

Combustibles; 0-100%LEL
-40C to +60C (-40F to +140F)
(Typical-range for some gases may differ)
XE, XA
XIR
XE, XA
<5%/year, typical
2%/year, typical
<10%/year, typical
<1% Full Scale
XE, XA, XIR

XE, XA
XIR
XE, XA
XE, XA, XIR
XE, XA
1%Full Scale or 2ppm, typical

2%Full Scale or 2ppm, (O2, CO)
2%Full Scale (50% LEL)
3%Full Scale (<50% LEL combustibles)
5%Full Scale (>50% LEL combustibles)
10%Full Scale or 2ppm, (non-CO toxics)
XE, XA
XE, XA
XE, XA
XE, XA
XIR
XE, XA
XIR
<12 seconds (typically 6 seconds)

<30 seconds (typically 12 seconds)
<8 seconds
<30 seconds
<2 seconds
15%-95% RH, non-condensing
0%-95% RH, non-condensing
XE, XA
XE, XA
XIR
2 years typical
3 years typical
5 years typical
1 year XE, XA; 2 years XIR
7-30VDC (oxygen and toxics)
7-30VDC @ 450mA maximum (combustibles)
7-30VDC @ 750mA maximum (combustibles)
Temperature Range
Drift
Zero Drift
Span Drift
Noise
Accuracy
Repeatability
Linearity
Response Times
T20 O2 & toxics
T50 O2 & toxics
T50 combust.
T90 combust.
T90 combust.
Humidity
Sensor Life
Oxygen & Toxics
Combust.
Combust.
Warranty
Power Input
XE, XA
XE, XA
XIR
Wiring Requirements
Combust.
XE, XA, XIR
Oxygen & Toxics
XE, XA
Oxygen & Toxics
XE, XA
Signal Output
XE, XA
XE, XA, XIR
Relay Contact Rating
Housing Entries
XE, XIR
XA
Physical
XE
XA
XIR
Approval Ratings
XE
(Includes X3
Technology)
XA
XIR
XE & XIR
XE, XA, XIR
3-wire
2-wire; no LEDs or relays
3-wire; LEDs and/or relays
4-20mA 2-wire current sink
4-20mA 3-wire current source
5amp @ 220 VAC; 5amp @ 30 VDC
Four conduit entries, 3/4" NPT or 25mm
One Entry
316 Stainless Steel; 10.4lbs (4.7kg)
6.3"W x 3.9"D x 10.3"L (160 x 99 x 261mm)
Polycarbonate; 1.5lbs (0.68kg)
5.1"W x 2.9"D x 9.4"L (130 x 76 x 239mm)
316 Stainless Steel; 10.8lbs (4.9kg)
12.6"W x 3.9"D x 5.7"L (320 x 99 x 144mm)
UL 1203 &
CSA C22.2-30
Class I, Div. 1, Groups A, B, C, & D
Class II, Div 1, Groups F, G
Class III
CSA C22.2 No. 152 Class I, Div. 1, Groups A, B, C, & D
Nema 4X rating
UL 1203 &
CSA C22.2-30
Class I, Div. 1, Groups A, B, C, & D;
Class II, Div.1, Groups E, F, & G;
Class III
CSA C22.2 No. 152 Class I, Div. 1, Groups B, C, & D
EN 50018
Class I, Zone 1, Group IIC
CE Low Voltage Directive: 73/23/EEC
CE EMC Directive: 89/336/EEC
Offices and representatives worldwide

For further information:

Ultima: X Series Gas Monitors

Uploaded by

Copyright:

Available Formats

Ultima: X Series Gas Monitors

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ultima: X Series Gas Monitors

Uploaded by

Copyright:

Available Formats

Ultima X Series Gas Monitors

[Ultimate Features. . . EXtreme Design ]

Ultima X Series Gas Monitors

Installation and Operation

MSAs patented feature allows for sensor change-out

Are available for remote sensing applications, where

Interchangeable Smart Sensors

Installation is both simple and flexible. The

Sensor Disconnect Under Power

Onboard LEDs and Relays

With a number of new and exciting features, the

Ultima X3 Technology for the Ultima X Series Gas Monitors features:

Ultima X Series Gas Monitors

[ Ultimate Features. . . EXtreme Design ]

Ultima XIR Gas Monitor Explosion-Proof

providing definitive compensation for temperature, humidity

Specifications (for Ultima XE, Ultima XA and Ultima XIR)

Acetylene IR- 0-2.5%

ID 07-2051-MC / Aug 2006

Combustibles, oxygen and toxics

XE, XA, XIR

1%Full Scale or 2ppm, typical

<12 seconds (typically 6 seconds)

Offices and representatives worldwide

You might also like