Style B Liquid Cooled Solid State Starters: Replacement Parts

STYLE B LIQUID COOLED
SOLID STATE STARTERS

REPLACEMENT PARTS
Supersedes: 160.00-RP3 (500)
Form 160.00-RP3 (614)
MODELS SSS 7L-B, 14L-B, 26L-B, 33L-B

AND
MODELS SSS 7LK-B, 14LK-B, 26LK-B, 33LK-B
00282VIP
Issue Date:
June 6, 2014
FORM 160.00-RP3
ISSUE DATE: 6/6/2014
IMPORTANT!
READ BEFORE PROCEEDING!

GENERAL SAFETY GUIDELINES
This equipment is a relatively complicated apparatus.
During installation, operation maintenance or service,
individuals may be exposed to certain components or
conditions including, but not limited to: refrigerants,
materials under pressure, rotating components, and
both high and low voltage. Each of these items has the
potential, if misused or handled improperly, to cause
bodily injury or death. It is the obligation and responsibility of operating/service personnel to identify and
recognize these inherent hazards, protect themselves,
and proceed safely in completing their tasks. Failure
to comply with any of these requirements could result
in serious damage to the equipment and the property in
which it is situated, as well as severe personal injury or

death to themselves and people at the site.
This document is intended for use by owner-authorized
operating/service personnel. It is expected that these
individuals possess independent training that will enable them to perform their assigned tasks properly and
safely. It is essential that, prior to performing any task
on this equipment, this individual shall have read and
understood this document and any referenced materials. This individual shall also be familiar with and
comply with all applicable governmental standards and
regulations pertaining to the task in question.
SAFETY SYMBOLS
The following symbols are used in this document to alert the reader to specific situations:
Indicates a possible hazardous situation
which will result in death or serious injury
if proper care is not taken.
Identifies a hazard which could lead to

damage to the machine, damage to other
equipment and/or environmental pollution if proper care is not taken or instructions and are not followed.
Indicates a potentially hazardous situation which will result in possible injuries

or damage to equipment if proper care is
not taken.
Highlights additional information useful

to the technician in completing the work
being performed properly.
External wiring, unless specified as an optional connection in the manufacturers product line, is not
to be connected inside the control cabinet. Devices such as relays, switches, transducers and controls
and any external wiring must not be installed inside the micro panel. All wiring must be in accordance with Johnson Controls published specifications and must be performed only by a qualified
electrician. Johnson Controls will NOT be responsible for damage/problems resulting from improper
connections to the controls or application of improper control signals. Failure to follow this warning will void the manufacturers warranty and cause serious damage to property or personal injury.
JOHNSON CONTROLS
FORM 160.00-RP3
CHANGEABILITY OF THIS DOCUMENT

In complying with Johnson Controls policy for continuous product improvement, the information contained
in this document is subject to change without notice.
Johnson Controls makes no commitment to update or
provide current information automatically to the manual owner. Updated manuals, if applicable, can be obtained by contacting the nearest Johnson Controls Service office or accessing the Johnson Controls QuickLIT
website at http://cgproducts.johnsoncontrols.com.
Operating/service personnel maintain responsibility for
the applicability of these documents to the equipment.
If there is any question regarding the applicability of
these documents, the technician should verify whether

the equipment has been modified and if current literature is available from the owner of the equipment prior
to performing any work on the chiller.
CHANGE BARS
Revisions made to this document are indicated with a
line along the left or right hand column in the area the
revision was made. These revisions are to technical information and any other changes in spelling, grammar
or formatting are not included.
HOW TO USE RENEWAL PARTS MANUALS

Johnson Controls offers an assortment of replacements
parts for Johnson Controls, YORK and UPG units.
Each replacement part is manufactured and fitted for
a specific model. This Replacement Parts Manual is
for standard Johnson Controls units. Chiller units built
with special options, modifications, or conversions are
not covered in this manual.
This Replacement Parts Manual provides Johnson
Controls chiller replacement parts by part numbers,
descriptions, quantities and drawing figures. To determine the correct replacement part, locate the item on
drawing figure and refer to the parts list for the part
number, description and quantity.
NOTE: Provide a unit model number, unit serial number and part number when requesting a quotation or
placing an order. Failure to include this information
may delay processing of your request.
Model and Serial Number Locations:
Unit - Namplate on side of Control Panel
Compressor - Namplate on Compressor Housing
Contact the following sources to order parts.

NORTH AMERICA
Baltimore Parts Center
Contrators within USA
Telephone: (800)-932-1701
Equipment Owners within USA who maintain
their own equipment
Telephone: (800)-482-2778
Email: [email protected]
For parts availability and ordering YORK HVAC
Parts within the USA please use the following link:
http://www.johnsoncontrols.com/content/us/en/products/building_efficiency/products-and-systems/integrated_hvac_systems/parts_center/baltimorepartscenter.html
EUROPE
HVAC Parts Centre (Europe)
Telephone: +44 (0) 1268 246 400
Email: [email protected]
VSD - Namplate on VSD Panel
JOHNSON CONTROLS
FORM 160.00-RP3
THIS PAGE INTENTIONALLY LEFT BLANK.
JOHNSON CONTROLS
FORM 160.00-RP3
LIST OF TABLES
TABLE 1 - Common Parts for all Models7
TABLE 2 - Common Parts Per Model7
TABLE 3 - Variable Parts for all 7L Models8
TABLE 4 - Variable Parts for all 7LK Models8
TABLE 6 - Variable Parts for all 14L Models (Cont'd)8
TABLE 8 - Variable Parts for all 14LK Models (Cont'd)9
TABLE 12 - Variable Parts for all 26LK Models (Cont'd)10
TABLE 15 - Variable Parts for all 33LK Models 11
TABLE 16 - Variable Parts for all 33LK Models (Cont'd) 11
TABLE 17 - Input Power Replacements and Options12
TABLE 19 - SCR Replacement Kit ( Style None A and B)13
TABLE 20 - SCR Replacement Kit ( Style None A and B)13
TABLE 21 - Common Parts 375-03048-00113
JOHNSON CONTROLS
FORM 160.00-RP3
THIS PAGE INTENTIONALLY LEFT BLANK.
JOHNSON CONTROLS
FORM 160.00-RP3
Table 1 - COMMON PARTS FOR ALL MODELS

ITEM
1
PART NUMBER
FIGURE
Logic / Trigger Board 60 Hz applications (includes 031-02505-001 board)
DESCRIPTION
031-02757-002
Logic / Trigger Board 50 Hz applications (includes 031-02505-002 board)
031-02757-003
Capacitor, Assembly
371-01086-000
Fuseholder for 7FU
025-34186-000
Fuseholder for 1FU-6FU ( 1 of 2 )
025-34185-000
Fuse, 4 Amp 7 FU
025-27973-000
Fastener, Panel Adj.
021-17252-000
Hose Barb, Plastic - Threads Into SCR Brick Assembly
023-20205-000
Hose, Clear Plastic order by the foot
028-12239-000
Coolant Header 3" PVC with Fill Plug
371-02561-513
10
Heat Exchanger
026-36596-000
Not Shown
Hose, connect heat exchanger to condenser water 150 PSI., 50 Ft Roll
028-11958-000
Not Shown
Hose, connect heat exchanger to condenser water 300 PSI., 50 Ft Roll
028-11959-000
11
Temperature Sensor kit ( thermistor, lugs, and plug )
031-02758-000
12
U16 Logic / Trigger Board EPROM (used on 031-02001-xxx board)
031-02029-001
12
U16 Logic / Trigger Board EPROM (used on 031-02505-xxx board)
031-02541-001
13
U15 Battery Backed RAM for the Logic / Trigger Board
031-01620-000
14
Coolant Pump 50 / 60 Hz
026-32813-000
Inhibitor, Coolant
013-02987-000
Not Shown
Table 2 - COMMON PARTS PER MODEL

ITEM
15
DESCRIPTION
Ground Terminal
Not Shown Terminal Lug Kit ( 3 Lugs )
PART NUMBER
FIGURE
7L 7LK
14L 14LK
26L 26LK
33L 33LK
025-34196-000
025-34197-000
025-34198-000
025-34198-000
371-02576-101
371-02576-102
371-02576-103
371-02576-104
16
Bus Bar ( L1 )
371-02500-003
371-02500-003
371-01082-006
371-01082-006
17
Bus Bar ( L2 )
371-02500-002
371-02500-002
371-01082-005
371-01082-005
18
Bus Bar ( L3 )
371-02500-001
371-02500-001
371-01082-004
371-01082-004
19
Output Current Transformer 025-34195-001
025-34195-002
025-34195-003
025-37195-004
4, 5
JOHNSON CONTROLS
FORM 160.00-RP3
Table 3 - VARIABLE PARTS FOR ALL 7L MODELS

ITEM
DESCRIPTION
PART NUMBER
7L-40B
7L-46B
7L-58B
7L-50B
FIGURE
20
SCR Assembly Kit 1 of 3
375-03048-002
375-03048-002
375-03048-003
375-03048-002
4, 5
21
Fuse ( 1FU 3FU )
025-34136-000
025-34135-000
025-34194-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34137-000
025-34136-000
025-34135-000
025-34137-000
23
Fuse ( 6FU )
025-34141-000
025-34141-000
025-34141-000
025-34141-000
24
Snubber Resistor
371-02564-003
371-02564-003
371-02564-004
371-02564-003
25
Control Power Transformer
371-02568-006
371-02568-004
371-02568-005
371-02568-006
Table 4 - VARIABLE PARTS FOR ALL 7LK MODELS

ITEM
DESCRIPTION
PART NUMBER
7LK-40B
7LK-46B
7LK-58B
7LK-50B
FIGURE
20
375-03048-002
375-03048-002
375-03048-003
375-03048-002
4, 5
21
Fuse ( 1FU 3FU )
025-34136-000
025-34136-000
025-34540-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34140-000
025-34139-000
025-34137-000
025-34140-000
23
Fuse ( 6FU )
025-34142-000
025-34142-000
025-34142-000
025-34142-000
24
Snubber Resistor
371-02564-003
371-02564-003
371-02564-004
371-02564-003
25
371-02569-006
371-02569-004
371-02569-005
371-02569-006

ITEM
DESCRIPTION
PART NUMBER
14L-17B
14L-28B
14L-40B
FIGURE
20
375-03048-004
375-03048-004
375-03048-004
4, 5
21
Fuse ( 1FU 3FU )
025-34140-000
025-34140-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34141-000
025-34141-000
025-34137-000
23
Fuse ( 6FU )
025-34141-000
025-34141-000
025-34141-000
24
Snubber Resistor
371-02564-002
371-02564-002
371-02564-003
25
371-02568-002
371-02568-003
371-02568-006
Table 6 - VARIABLE PARTS FOR ALL 14L MODELS (CONT'D)

ITEM
DESCRIPTION
PART NUMBER
14L-46B
14L-58B
14L-50B
FIGURE
20
375-03048-004
375-03048-005
375-03048-004
4, 5
21
Fuse ( 1FU 3FU )
025-34135-000
025-34194-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34136-000
025-34135-000
025-34137-000
23
Fuse ( 6FU )
025-34141-000
025-34141-000
025-34141-000
24
Snubber Resistor
371-02564-003
371-02564-004
371-02564-003
25
371-02568-004
371-02568-005
371-02568-006
JOHNSON CONTROLS
FORM 160.00-RP3

ITEM
DESCRIPTION
PART NUMBER
14LK-17B
14LK-28B
14LK-40B
FIGURE
20
375-03048-004
375-03048-004
375-03048-004
4, 5
21
Fuse ( 1FU 3FU )
025-34141-000
025-34141-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34142-000
025-34142-000
025-34140-000
23
Fuse ( 6FU )
025-34142-000
025-34142-000
025-34142-000
24
Snubber Resistor
371-02564-002
371-02564-002
371-02564-003
25
371-02569-002
371-02569-003
371-02569-006
Table 8 - VARIABLE PARTS FOR ALL 14LK MODELS (CONT'D)

ITEM
DESCRIPTION
PART NUMBER
14LK-46B
14LK-58B
14LK-50B
FIGURE
20
375-03048-004
375-03048-005
375-03048-004
4, 5
21
Fuse ( 1FU 3FU )
025-34136-000
025-34540-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34139-000
025-34137-000
025-34140-000
23
Fuse ( 6FU )
025-34142-000
025-34142-000
025-34142-000
24
Snubber Resistor
371-02564-003
371-02564-004
371-02564-003
25
371-02569-004
371-02569-005
371-02569-006

ITEM
DESCRIPTION
PART NUMBER
26L-17B
26L-28B
26L-40B
FIGURE
20
375-03048-006
375-03048-006
375-03048-006
4, 5
21
Fuse ( 1FU 3FU )
025-34140-000
025-34140-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34141-000
025-34141-000
025-34137-000
23
Fuse ( 6FU )
025-34141-000
025-34141-000
025-34141-000
24
Snubber Resistor
371-02564-002
371-02564-002
371-02564-003
25
371-02568-002
371-02568-003
371-02568-006

ITEM
DESCRIPTION
PART NUMBER
26L-46B
26L-58B
26L-50B
FIGURE
20
375-03048-006
375-03048-007
375-03048-006
4, 5
21
Fuse ( 1FU 3FU )
025-34135-000
025-34194-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34136-000
025-34135-000
025-34137-000
23
Fuse ( 6FU )
025-34141-000
025-34141-000
025-34141-000
24
Snubber Resistor
371-02564-003
371-02564-004
371-02564-003
25
371-02568-004
371-02568-005
371-02568-006
JOHNSON CONTROLS
FORM 160.00-RP3

ITEM
DESCRIPTION
PART NUMBER
26LK-17B
26LK-28B
26LK-40B
FIGURE
20
375-03048-006
375-03048-006
375-03048-006
4, 5
21
Fuse ( 1FU 3FU )
025-34141-000
025-34141-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34142-000
025-34142-000
025-34140-000
23
Fuse ( 6FU )
025-34142-000
025-34142-000
025-34142-000
24
Snubber Resistor
371-02564-002
371-02564-002
371-02564-003
25
371-02569-002
371-02569-003
371-02569-006

ITEM
DESCRIPTION
PART NUMBER
26LK-46B
26LK-58B
26LK-50B
FIGURE
20
375-03048-006
375-03048-007
375-03048-006
4, 5
21
Fuse ( 1FU 3FU )
025-34136-000
025-34540-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34139-000
025-34137-000
025-34140-000
23
Fuse ( 6FU )
025-34142-000
025-34142-000
025-34142-000
24
Snubber Resistor
371-02564-003
371-02564-004
371-02564-003
25
371-02569-004
371-02569-005
371-02569-006

ITEM
DESCRIPTION
PART NUMBER
33L-17B
33L-28B
33L-40B
FIGURE
20
375-03048-008
375-03048-008
375-03048-008
4, 5
21
Fuse ( 1FU 3FU )
025-34140-000
025-34140-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34141-000
025-34141-000
025-34137-000
23
Fuse ( 6FU )
025-34141-000
025-34141-000
025-34141-000
24
Snubber Resistor
371-02564-002
371-02564-002
371-02564-003
25
375-02568-002
375-02568-003
375-02568-006

ITEM
10
DESCRIPTION
PART NUMBER
33L-46B
33L-50B
FIGURE
20
375-03048-008
375-03048-008
4, 5
21
Fuse ( 1FU 3FU )
025-34135-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34136-000
025-34137-000
23
Fuse ( 6FU )
025-34141-000
025-34141-000
24
Snubber Resistor
371-02564-003
371-02564-003
25
375-02568-004
375-02568-006
JOHNSON CONTROLS
FORM 160.00-RP3

ITEM
DESCRIPTION
PART NUMBER
33LK-17B
33LK-28B
33LK-40B
FIGURE
20
SCR Assembly 1 of 3
375-03048-008
375-03048-008
375-03048-008
4, 5
21
Fuse ( 1FU 3FU )
025-34141-000
025-34141-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34142-000
025-34142-000
025-34140-000
23
Fuse ( 6FU )
025-34142-000
025-34142-000
025-34142-000
24
Snubber Resistor
371-02564-002
371-02564-002
371-02564-003
25
371-02569-002
371-02569-003
371-02569-006

ITEM
DESCRIPTION
PART NUMBER
33LK-46B
33LK-50B
FIGURE
20
SCR Assembly 1 of 3
375-03048-008
375-03048-008
4, 5
21
Fuse ( 1FU 3FU )
025-34136-000
025-34136-000
22
Fuse ( 4FU 5FU )
025-34139-000
025-34140-000
23
Fuse ( 6FU )
025-34142-000
025-34142-000
24
Snubber Resistor
371-02564-003
371-02564-003
25
371-02569-004
371-02569-006
JOHNSON CONTROLS
11
FORM 160.00-RP3
Table 17 - INPUT POWER REPLACEMENTS AND OPTIONS

PART
NUMBER
FIGURE
Replacement Disconnect Switch 250 Amp
371-02565-601
371-02565-603
371-02565-605
371-02565-607
Replacement Circuit Breaker 250 Amp
371-02566-601
371-02566-603
371-02566-605
371-02566-607
371-02566-609
371-03671-601
371-03671-603
371-03671-605
371-03671-607
371-03671-609
Channel Insulator for 1200 Amp Disconnect Switch, 960 and 1200 Circuit Breaker
071-01127-000
ITEM
DESCRIPTION
Replacement Kit to Convert from a 'S' type to a 'T' type Disconection Switch
26
For UL Applications
Replacement Kit to Convert from a 'S' type to a 'T' type Circuit Breaker
26
For CE Applications
Replacement Kit to Convert from a 'S' type to a 'T' type Circuit Breaker
26
27
Use these part numbers when replaceing a 'T' type Disconnect Switch
26
024-37497-000
024-37498-000
024-37499-000
024-37500-000
For UL Applications
Use these part numbers when replaceing a 'T' type Circuit Breaker
26
224-37493-000
224-37494-000
224-37495-000
224-37501-000
224-37496-000
Normally, the disconnect switch and circuit breaker are factory installed. However, there may be times when the
customer may desire to have these options installed after the starter has already been shipped from the factory. The
part number for these kits should use the replacement kit where the switch device designed has changed from the
'S' type to the 'T' type.
The full load rating for these device are listed below.
12
DISCONNECT
SWITCH SIZE
FULL LOAD
RANGE
CIRCUIT
BREAKER SIZE
FULL LOAD
RANGE
250 Amps
0 - 217 Amps
250 Amps
100 - 250 Amps
400 Amps
0 - 348 Amps
400 Amps
178 - 400 Amps
600 Amps
0 - 522 Amps
600 Amps
267 - 600 Amps
1200 Amps
0 - 1043 Amps
960 Amps
426 - 960 Amps
1200 Amps
533 - 1200 Amps

JOHNSON CONTROLS
FORM 160.00-RP3
Table 19 - SCR REPLACEMENT KIT ( STYLE NONE A AND B)

7L 40, 46, 50
7L 58
14L 17, 28,

40, 46, 50
14L-58
375-03048-002
375-03048-003
375-03048-004
375-03048-005
ITEM
DISCRIPTION
PART
NUMBER
QTY.
PART
NUMBER
QTY.
PART
NUMBER
QTY.
PART
NUMBER
QTY.
20
Common Parts
375-02048-001
375-02048-001
375-02048-001
375-02048-001
21
Rectifier Assy.
371-02541-332
371-02541-333
371-02541-334
371-02541-335
22
Standoff
------------------
---
------------------
---
-------------------
---
------------------
---
Table 20 - SCR REPLACEMENT KIT ( STYLE NONE A AND B)

26L - 17, 28, 40, 46, 50
26L-58
33L - 17, 28, 40, 46, 50
375-03048-006
375-03048-007
375-03048-008
ITEM
DISCRIPTION
PART NUMBER
QTY.
PART NUMBER
QTY.
PART NUMBER
QTY.
20
Common Parts
375-02048-001
375-02048-001
375-02048-001
21
Rectifier Assy.
371-02542-332
371-02542-333
371-02543-332
22
Standoff
021-17565-000
021-17565-000
021-17565-000
Table 21 - COMMON PARTS 375-03048-001

ITEM
DESCRIPTION
PART
NUMBER
QUANTITY
PER KIT
Instruction. Installation
075-03048-000
Inhibitor, Corrosion AL/CU
013-02987-000
Hose Clamp
021-17547-000
Hose Barb
023-16247-000
Tube, Plastic 7/16 I.D.
028-12239-000
4.25 FT
Nipple, Brass NPT X 7/8
023-16260-000
Fitting, Int. X3/8 Ext Fl.
023-00900-000
Compound, Anti-Oxidant
013-02880-000
Bag, Cloth W/Drawstring
030-00755-000
JOHNSON CONTROLS
13
FORM 160.00-RP3
25
Optional Disconnect
Switch or Curcuit
Breaker
00388VIP
Figure 1 - SOLID START STARTER - FRONT VIEW, EXTERIOR

14
JOHNSON CONTROLS
FORM 160.00-RP3
15
26
12
00390VIP
27
13
Figure 2 - SOLID START STARTER - INTERIOR VIEW

JOHNSON CONTROLS
15
FORM 160.00-RP3
21
4
22
5
23
00391VIP
Figure 3 - SOLID START STARTER - FUSE DETAIL

16
JOHNSON CONTROLS
FORM 160.00-RP3
19
18
00392VIP
17
20
16
Figure 4 - SOLID START STARTER - POWER SECTION DETAIL

JOHNSON CONTROLS
17
FORM 160.00-RP3
19
11
24
20
00393VIP
Figure 5 - SOLID START STARTER - SCR POLE DETAIL

18
JOHNSON CONTROLS
FORM 160.00-RP3
9
8
14
00394VIP
10
Figure 6 - SOLID START STARTER - REAR VIEW, COOLING LOOP

JOHNSON CONTROLS
19
FORM 160.00-RP3
NOTES
20
JOHNSON CONTROLS
FORM 160.00-RP3
The following factors can be used to convert from

English to the most common SI Metric values.
Table 22 - SI METRIC CONVERSION

MEASUREMENT
MULTIPLY ENGLISH UNIT
BY FACTOR
TO OBTAIN METRIC UNIT
Capacity
Tons Refrigerant Effect (ton)
3.516
Kilowatts (kW)
Power
Horsepower
0.7457
Kilowatts (kW)
Flow Rate
Gallons / Minute (gpm)
0.0631
Liters / Second (l/s)
Feet (ft)
0.3048
Meters (m)
Inches (in)
25.4
Millimeters (mm)
Weight
Pounds (lbs)
0.4538
Kilograms (kg)
Velocity
Feet / Second (fps)
0.3048
Meters / Second (m/s)
Feet of Water (ft)
2.989
Kilopascals (kPa)
Pounds / Square Inch (psi)
6.895
Kilopascals (kPa)
Length
Pressure Drop
TEMPERATURE
To convert degrees Fahrenheit (F) to degrees Celsius
(C), subtract 32 and multiply by 5/9 or 0.5556.
Example: (45.0F - 32) x 0.5556 = 27.2C
To convert a temperature range (i.e., a range of 10F)
from Fahrenheit to Celsius, multiply by 5/9 or 0.5556.
Example: 10.0F range x 0.5556 = 5.6 C range
JOHNSON CONTROLS
21
P.O. Box 1592, York, Pennsylvania USA 17405-1592

Copyright by Johnson Controls 2014
Form 160.00-RP3 (614)
Issue Date: June 6, 2014
Supersedes: 160.00-RP3 (500)
800-861-1001
www.johnsoncontrols.com
Subject to change without notice. Printed in USA

ALL RIGHTS RESERVED

Style B Liquid Cooled Solid State Starters: Replacement Parts

Uploaded by

Copyright:

Available Formats

Style B Liquid Cooled Solid State Starters: Replacement Parts

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Style B Liquid Cooled Solid State Starters: Replacement Parts

Uploaded by

Copyright:

Available Formats

STYLE B LIQUID COOLED

SOLID STATE STARTERS

Supersedes: 160.00-RP3 (500)

Form 160.00-RP3 (614)

MODELS SSS 7L-B, 14L-B, 26L-B, 33L-B

READ BEFORE PROCEEDING!

which it is situated, as well as severe personal injury or

Identifies a hazard which could lead to

Indicates a potentially hazardous situation which will result in possible injuries

Highlights additional information useful

CHANGEABILITY OF THIS DOCUMENT

these documents, the technician should verify whether

HOW TO USE RENEWAL PARTS MANUALS

Contact the following sources to order parts.

VSD - Namplate on VSD Panel

THIS PAGE INTENTIONALLY LEFT BLANK.

THIS PAGE INTENTIONALLY LEFT BLANK.

Table 1 - COMMON PARTS FOR ALL MODELS

Logic / Trigger Board 60 Hz applications (includes 031-02505-001 board)

Logic / Trigger Board 50 Hz applications (includes 031-02505-002 board)

Fuseholder for 7FU

Fuseholder for 1FU-6FU ( 1 of 2 )

Fastener, Panel Adj.

Hose Barb, Plastic - Threads Into SCR Brick Assembly

Hose, Clear Plastic order by the foot

Coolant Header 3" PVC with Fill Plug

Hose, connect heat exchanger to condenser water 150 PSI., 50 Ft Roll

Hose, connect heat exchanger to condenser water 300 PSI., 50 Ft Roll

Temperature Sensor kit ( thermistor, lugs, and plug )

U16 Logic / Trigger Board EPROM (used on 031-02001-xxx board)

U16 Logic / Trigger Board EPROM (used on 031-02505-xxx board)

U15 Battery Backed RAM for the Logic / Trigger Board

Table 2 - COMMON PARTS PER MODEL

Not Shown Terminal Lug Kit ( 3 Lugs )

Output Current Transformer 025-34195-001

Table 3 - VARIABLE PARTS FOR ALL 7L MODELS

SCR Assembly Kit 1 of 3

Fuse ( 1FU 3FU )

Fuse ( 4FU 5FU )

Control Power Transformer

Table 4 - VARIABLE PARTS FOR ALL 7LK MODELS

SCR Assembly Kit 1 of 3

Fuse ( 1FU 3FU )

Fuse ( 4FU 5FU )

Control Power Transformer

Table 5 - VARIABLE PARTS FOR ALL 14L MODELS

SCR Assembly Kit 1 of 3

Fuse ( 1FU 3FU )

Fuse ( 4FU 5FU )

Control Power Transformer

Table 6 - VARIABLE PARTS FOR ALL 14L MODELS (CONT'D)

SCR Assembly Kit 1 of 3

Fuse ( 1FU 3FU )

Fuse ( 4FU 5FU )

Control Power Transformer

Table 7 - VARIABLE PARTS FOR ALL 14LK MODELS

SCR Assembly Kit 1 of 3

Fuse ( 1FU 3FU )

Fuse ( 4FU 5FU )