Software

Software

iQ Works
MELSOFT Navigator

iQ Platform

RT Toolbox2 (LT)

GX Works2

MELFA-Vision
MT Works2

MELFA-Works

GT Works3
MX MES IT

MELSECNET/H (PLC to PLC network)

Redundant
Process CPU

Redundant
Process CPU
STATION No.
x10 1 2 3 4
0

x1

GCC1 09

5
6

2 3
8 7

4
5
6

L RUN/L ERR.

SLD DG DB DA

GX Developer

GT Works 3

MT Works2

WS Configurator

SoftGOT
GT Works3

GX Configurator

L Series
CNC

PLC to PLC
& Remote I/O

MITSUBISHI

FX
GX Developer

GX Works2

NC Configurator
NC Monitor
NC Designer
NC Explorer

MELSECNET/H control remote I/O network

QS Safety PLC

MS Configurator

ST I/O

ST Configurator

Safety Relays

A J65BTB1-16D

B RATE
0 1

PW L RUN

SD

RD L ERR.
4

2
3

STATION NO.
X10
X1
0 1
9 0 1
2
2 8
3
3 7
6 5 4

A B C D E F

6 5 4

3
DA

+24V

4
DB

5
DG

11

13

15

19

17

21

25

23

27

24G

10

12

14

16

18

20

22

24

26

SLD

(FG)

QS0J65BTB2-12DT
Safety I/O

AJ65BTB1-16D
CC-Link I/O

GX Developer
GT Works3

Software Maintenance Agreement (SMA).........................................................................................534

A. iQ Platform Integrated System Programming Suite - iQ Works..................................................534
B. Controller Programming Software...............................................................................................535
C. Optional Controller Software.......................................................................................................537
D. Motion Programming Software...................................................................................................539
E. Servo Sizing and Setup Software................................................................................................540
F. HMI Programming Software........................................................................................................540
G. Inverter/VFD Setup Software.......................................................................................................540
H. Enterprise Solution and Setup Software.....................................................................................541
I. Robot Software.............................................................................................................................541
J. CNC Software...............................................................................................................................542

Stock Product: Stock product is product MEAU makes every effort to have on hand for immediate shipment. There may be instances when
we are out of stock due to unexpected large requirements. All stock product will be indicated in this book by an S in the Stocked Item
columns/rows.
Non-Stock Product: Non-stock product is product supplied on an as-needed basis. Standard lead times of 2 - 4 weeks apply, product is
non-returnable and non-cancelable. Product listed as non-stock may change to stock product subject to increases in sales and usage. All
non-stock product will be indicated in this book by a dash - in the Stocked Item columns/rows.

Mitsubishi Electric Automation

Software 533

The software maintenance agreement allows users to purchase a yearly software maintenance contract that includes automatic delivery of ALL
upgrades that MEAU releases during the contract year for the associated software title. The SMA ensures that a customer will always have the current
version of software. The contract for this service runs one year from the date of purchase, and should be renewed yearly to ensure continuous service.

A. iQ Platform Integrated System Programming Suite - iQ Works

The Next Generation in industrial software has arrived with the release of the iQ Works suite. The concept of this next generation is efficiency
through integration. The iQ Works suite contains and maintains four different core software packages; MELSOFT Navigator, GX Works2, MT
Works2, and GT Works3. MELSOFT Navigator is the umbrella software that serves as the system configuration software and launching pad for
the other three packages. Users are able to graphically assemble their networks, controllers, special function modules, and I/O for sequence
control, along with their motion controller modules and GOT1000 HMIs.

SMA

Software

Type

Model Number

Description

Stock Status

iQ-Works-C1

Single User License of iQ Works on DVD

iQ-Works-C5

5 User License of iQ Works on DVD

iQ-Works-C10

10 User License iQ Works on DVD

iQ-Works-C25

25 User License iQ Works on DVD

iQ-Works-C50

50 User License iQ Works on DVD

iQ-Works-C100

100 User License iQ Works on DVD

iQ-Works-OEM

OEM license for iQ-Works on DVD

iQ-Works-C1-SMA

SMA for iQ-Works-C1

iQ-Works-C5-SMA

SMA for iQ-Works-C5

iQ-Works-C10-SMA

SMA for iQ-Works-C10

iQ-Works-C25-SMA

SMA for iQ-Works-C25

iQ-Works-C50-SMA

SMA for iQ-Works-C50

iQ-Works-C100-SMA

SMA for iQ-Works-C100

iQ-Works-OEM-SMA

SMA license for iQ-Works-OEM on DVD

Notes

This is a single DVD which contains all four software titles

(MELSOFT Navigator, GX Works2, MT Works2 and GT Works3)

These are the part number to order an SMA for the DVD or CD iQ Works
part numbers. Updates will be provided electronically.

Upgrade to Full iQ Works*

Level 2

Level 1

Type

Part Number

Description

Stock Status

iQ-Works-LUP1-C1

Upgrade to iQ Works - 1 C1 Title Owned

iQ-Works-LUP1-C5

Upgrade to iQ Works - 1 C5 Title Owned

iQ-Works-LUP1-C10

Upgrade to iQ Works - 1 C10 Title Owned

iQ-Works-LUP1-C25

Upgrade to iQ Works - 1 C25 Title Owned

iQ-Works-LUP1-C50

Upgrade to iQ Works - 1 C50 Title Owned

iQ-Works-LUP1-C100

Upgrade to iQ Works - 1 C100 Title Owned

iQ-Works-LUP2-C1

Upgrade to iQ Works - 2 C1 Titles Owned

iQ-Works-LUP2-C5

Upgrade to iQ Works - 2 C5 Titles Owned

iQ-Works-LUP2-C10

Upgrade to iQ Works - 2 C10 Titles Owned

iQ-Works-LUP2-C25

Upgrade to iQ Works - 2 C25 Titles Owned

iQ-Works-LUP2-C50

Upgrade to iQ Works - 2 C50 Titles Owned

iQ-Works-LUP2-C100

Upgrade to iQWorks - 2 C100 Titles Owned

Notes

These part number are for customers who already own 1 iQ Works component
software (GX Works2, MT Works2 or GT Works3). Example: The customer owns
GX Works2 or MT Works2 but they now want to upgrade to the full iQ Works suite.

These part number are for customers who already own 2 iQ Works component
software titles (GX Works2, MT Works2 or GT Works3). Example: The customer
owns GX Works2 and MT Works2 but they now want to upgrade to the full iQ Works
suite.

Note: iQ Works and the component software titles are new products. Customers with existing GX Developer, MT Developer and GT Works2 software or SMAs are not entitle to an upgrade to iQ Works,
GX Works2, MT Works2 (MT Developer) or GT Works3.

Upgrade to iQ Works OEM License

Type

Software

n SOFTWARE

Software Maintenance Agreement (SMA)

534

Part Number

Description

Stock Status

Notes

IQ-WORKS-C1-OEM

Upgrade from iQ Works-C1 to OEM license

IQ-WORKS-LUP1-OEM

Upgrade to iQ Works - 1 OEM Title Owned

IQ-WORKS-LUP2-OEM

Upgrade to iQ Works - 2 OEM Title Owned

IQ-WORKS-L1-C1-OEM

Upgrade to iQ Works OEM - 1 C1 Title Owned -

IQ-WORKS-L2-C1-OEM

Upgrade to IQ Works OEM - 2 C1 Title Owned -

This part number is for customers who already own iQ-Works-C1

This part number is for customers who already own 1 of the iQ Works component
software in OEM version (GX-Works2-OEM, GT-Works3-OEM, or MT-Works2-OEM)
This part number is for customers who already own 2 of the iQ Works component
software in OEM version (GX-Works2-OEM, GT-Works3-OEM, or MT-Works2-OEM)
This part number is for customers who already own 1 of the iQ Works component
software in single license version (GX-Works2-C1, GT-Works3-C1, or
MT-Wokrs2-C1)
This part number is for customers who already own 2 of the iQ Works component
software in single license version (GX-Works2-C1, GT-Works3-C1, or
MT-Wokrs2-C1)

B. Controller Programming Software

GX Works2

GX Works2, as part of iQ Works, is the next generation configuration and programming software for FX, L and iQ Platform / Q Series controllers.
Following the goal of maximum efficiency, GX Works2 allows developers to mix and match between five different programming languages,
each conforming to a different programming style. Developers can select their preferred language which is best suited for the application. This
environment conforms to IEC1131-3 standards, also allowing parts of projects to be saved in Libraries for use within future applications.

SMA

Software

Type

Model Number

Description

Stock Status

GX-WORKS2-C1

Single user license of GX Works2

GX-WORKS2-C5

5 user license of GX Works2

GX-WORKS2-C10

10 user license of GX Works2

GX-WORKS2-C25

25 user license of GX Works2

GX-WORKS2-C50

50 user license of GX Works2

GX-WORKS2-C100

100 user license of GX Works2

GX-WORKS2-OEM

OEM license for GX-Works2

GX-WORKS2-C1-SMA

SMA for GX-Works2-C1

GX-WORKS2-C5-SMA

SMA for GX-Works2-C5

GX-WORKS2-C10-SMA

SMA for GX-Works2-C10

GX-WORKS2-C25-SMA

SMA for GX-Works2-C25

GX-WORKS2-C50-SMA

SMA for GX-Works2-C50

GX-WORKS2-C100-SMA SMA for GX-Works2-C100

GX-WORKS2-OEM-SMA

SMA for GX-Works2-OEM

Notes

These are the part numbers to use if a customer wants to purchase the GX Works2
programming software only, without the full iQ Works suite.

These are the part number to order an SMA for the GX Works2 part numbers.
Updates will be provided electronically.

GX Developer

GX Developer is the basic controller programming environment supporting Q Process, QS Safety, and legacy controllers like the AnS, QnA, and
A700 VFD with built-in PLC. It is also compatible with current iQ Platform / Q, L, and FX Series controller offering. This software is used for
programming as well as configuration of communication and intelligent function modules. GX Configurator and FX Configurator plug-ins are
included on the CD.
Model Number

Description

Stocked Item

GX-DEV-C1

Single user license - can be used on 1 computer at a time. Includes 1 CD containing both software and electronic manuals

GX-DEV-C1-SMA

SMA FOR GX-DEV-C1

GX-DEV-C5

5 user license - can be used on up to 5 computers at a time. Includes 1 CD containing both software and electronic manuals

GX-DEV-C5-SMA

SMA FOR GX-DEV-C5

GX-DEV-C10

10 user license - can be used on up to 10 computers at a time. Includes 1 CD containing both software and electronic manuals

GX-DEV-C10-SMA

SMA FOR GX-DEV-C10

GX-DEV-C25

25 user license - can be used on up to 25 computers at a time. Includes 1 CD containing both software and electronic manuals

GX-DEV-C25-SMA

SMA FOR GX-DEV-C25

GX-DEV-C50

50 user license - can be used on up to 50 computers at a time. Includes 1 CD containing both software and electronic manuals

GX-DEV-C50-SMA

SMA FOR GX-DEV-C50

IB(NA)0800242

GX-DEV / GX-SIM Startup Manual

IB(NA)0800243

GX-DEV Operating Manual

IB(NA)0800244

GX-DEV SFC Operating Manual

IB(NA)0800245

MELSAP-L Operating Manual (Legacy Product SFC Programming)

IB(NA)0800246

GX-DEV Function Block Manual

IB(NA)0800004

GX Converter Operating Manual

IB(NA)0800247

Structured Text Operating Manual

IB(NA)0800248

Structured Text Programming Guide

Mitsubishi Electric Automation

Software 535

n SOFTWARE

GX Developer-FX
GX Developer-FX is a scaled down version of GX Developer supporting the FX Series PLCs. GX Developer-FX is 100% compatible with the
full version of GX Developer, therefore files can be shared between the two (limited to FX PLC programs). Customers who have already
purchased GX-DEV do not need GX-DEV-FX as all the functionality for the FX PLCs is the same in both packages. FX Configurator-EN and
FX Configurator-FP software plug-ins are included on the CD.
Model Number

Description

Stocked Item

GX-DEV-FX-C1

Single user license - can be used on 1 computer at a time

GX-DEV-FX-C1-SMA

SMA FOR GX-DEV-FX-C1

GX-DEV-FX-C5

5 user license - can be used on up to 5 computers at a time

GX-DEV-FX-C5-SMA

SMA FOR GX-DEV-FX-C5

GX-DEV-FX-C10

10 user license - can be used on up to 10 computers at a time

GX-DEV-FX-C10-SMA

SMA FOR GX-DEV-FX-C10

GX-DEV-FX-C25

25 user license - can be used on up to 25 computers at a time

GX-DEV-FX-C25-SMA

SMA FOR GX-DEV-FX-C25

GX-DEV-FX-C50

50 user license - can be used on up to 50 computers at a time

GX-DEV-FX-C50-SMA

SMA FOR GX-DEV-FX-C50

IB(NA)0800242

GX-DEV / GX-SIM Startup Manual

IB(NA)0800243

GX-DEV Operating Manual

IB(NA)0800244

GX-DEV SFC Operating Manual

IB(NA)0800245

MELSAP-L Operating Manual (Legacy Product SFC Programming)

IB(NA)0800246

GX-DEV Function Block Manual

JY992D88301

GX Developer-FX Supplemental Manual (Only included on the GX Developer-FX CD)

JY992D48301

FX Series Programming Manual (Only included on the GX Developer-FX CD)

Note: All software programs includes 1 CD containing both software and electronic manuals. Manuals are in Adobe Acrobat Reader format. A free copy of the Acrobat Reader program is
also included on the software CD. If hard copies of the manuals are desired, please refer to the manual model numbers listed.

PX Developer
Consists of a programming tool and monitoring tool supporting users to process DDC on QnP(R)HCPUs. Programming work is done in
FBD language. DDC processing monitor is done with tag data.
Model Number

Description

Stocked Item

PX-DEV-C1

Process Control Configuration Software

SH(NA)080369

Operating Manual (Programming Tool)

SH(NA)080370

Operating Manual (Monitor Tool)

SH(NA)080371

Programming Manual

WS Developer
The WS Developer Setting and Monitoring Tool software is used to configure, program, and commission a WS Safety Controller.
Visually assemble a CPU, I/O, and optional communication modules, then add Safety elements and pre-made Function Blocks, then
finish by simulating before downloading the program into the memory plug.
Model Number

Description

Stocked Item

WS-DEV-C1

Single user license - can be used on 1 computer at a time

Includes 1 CD containing both the software and electronic manuals

536

Alpha VLS Software

Windows based programming package designed to support the full line of Alpha2 controllers. Programming cable (AL-232CAB) is
required to connect the PC to the Alpha2 controller.
Model Number

Description

Stocked Item

ALPHA-WIN-1

Single user license - can be used on 1 computer at a time

Includes 1 CD containing both software and electronic manual JY992D74001

ALPHA-WIN-5

5 user license - can be used on up to 5 computers at a time

Includes 1 CD containing both software and electronic manual JY992D74001

ALPHA-WIN-10

10 user license - can be used on up to 10 computers at a time

Includes 1 CD containing both software and electronic manual JY992D74001

ALPHA-WIN-25

25 user license - can be used on up to 25 computers at a time

Includes 1 CD containing both software and electronic manual JY992D74001

ALPHA-WIN-50

50 user license - can be used on up to 50 computers at a time

Includes 1 CD containing both software and electronic manual JY992D74001

JY992D74001

Alpha VLS Software Manual*

JY992D97101

AL2 Programming Manual*

JY992D96801

AL2-EEPROM-2 Hardware Manual*

JY992D97201

AL2-GSM-CAB Hardware Manual*

JY992D76001

Alpha RS2232 Cable Users Guide*

JY992D97401

Alpha2 (AL2-4E_ _) installation Manual*

JY992D97701

Alpha2 Communication Manual*

JY992D97301

Alpha2 Hardware Manual*

JY992D81401

AL2-ASI-BD Hardware Manual*

Note: All manuals come free of charge on the software CD-ROM in Adobe Acrobat Reader format. A free copy of the Acrobat Reader program is also included on the software CD. If hard copies of the manuals are
desired, please refer to the manual model numbers listed.

C. Optional Controller Software

GX Configurator
GX Configurator is a set of tools specifically designed for the Q Series family of special function modules. The GX Configurator CD contains
the following software configuration titles as well as their respective manuals.
Model Number

Description

Stocked Item

GX-CONFIG-C1

Single user license - can be used on 1 computer at a time. Includes 1 CD-ROM containing both software and electronic manuals

GX-CONFIG-C1-SMA

SMA FOR GX-CONFIG-C1

Titles included on the GX CONFIGURATOR CD. The titles below are not sold separately.
Plug-In Title

Description

Manual

Stocked Item

Analog-Digital converter modules: Q64AD, Q68ADV, A68ADI

SH(NA)080055

Channel Isolated High Resolution Analog-Digital Modules (w/without Signal Conditioning Function):
Q64AD-GH, Q62AD-DGH

SH(NA)080277

Digital-Analog Modules: Q62DA, Q64DA, Q68DAV, Q68DAI

SH(NA)080054

Channel Isolated Digital-Analog Module: Q62DA-FG

SH(NA)080281

Thermocouple Input Modules - Channel Isolated Thermocouple/Micro Voltage Input Modules:

Q64TD, Q64TDV-GH

SH(NA)080141

Thermocouple Input Module: Q64RD

SH(NA)080142

Channel Isolated Pulse Input Module: QD60P8-G

SH(NA)080313

High Speed Counter Modules: QD62, QD62E, QD62D

SH(NA)080036

DeviceNet Master-Slave Module: QJ1DN91

SH(NA)080143

Serial Communications Modules: QJ71C24, QJ71C24-R2

SH(NA)080006

Serial Communications Module Protocol FB Support

SH(NA)080393

GX Configurator-TC

Temperature Control Modules: Q64TCTT, Q64TCTTBW, Q64TCRT, Q64TCRTBW

SH(NA)080121

GX Configurator-PT

Positioning Modules: QD70P4, QD70P8

SH(NA)080171

GX Configurator-AS

AS-i (OZZI) Network Master Module: QJ1AS92

SH(NA)080291

GX Configurator-MB

Modbus for the QJ71MB91

SH(NA)080578

GX Configurator-AD

GX Configurator-DA
GX Configurator-TI
GX Configurator-CT
GX Configurator-DN
GX Configurator-SC

Modbus is a registered trademark of Schneider Electric.

Mitsubishi Electric Automation

Software 537

n SOFTWARE

GX Configurator-QP

Sold as a separate configuration utility software title, GX Configurator-QP is used to configure and maintain systems using the QD75 family of
motion control modules.
Model Number

Description

Stocked Item

GX-CONFIG-QP-C1

Single user license - can be used on 1 computer at a time. Includes 1 CD-ROM containing both software and electronic
manuals Includes support for the QD75P1, QD75P2, QD75P3, QD75D1, QD75D2, QD75D3, QD75M1, QD75M2 & QD75M3
motion modules

GX-CONFIG-QP-C1-SMA

SMA FOR GX-CONFIG-QP-C1

IB(NA)0800261

GX-Configurator-QP Operating Manual*

SH(NA)080058

QD75P1-P2-P4-D1-D4 Positioning Modules Manual*

Note: All manuals come free of charge on the software CD-ROM in Adobe Acrobat Reader format. A free copy of the Acrobat Reader program is also included on the software CD. If hard copies of the manuals
are desired, please refer to the manual model numbers listed.

GX Configurator-CC

Sold as a separate configuration utility software title, GX Configurator-CC enables users to graphically configure and maintain a
CC-Link network.
Model Number

Description

Stocked Item

GX-CONFIG-CC-C1

Single user license - can be used on 1 computer at a time. Includes 1 CD-ROM containing both software and electronic
manuals. Includes support for all MELSEC A, QnA and Q Series CC-Link networks

GX-CONFIG-CC-C1-SMA

SMA FOR GX-CONFIG-CC-C1

SH(NA)080103

GX-Configurator-CC Operating Manual*

IB(NA)66721

AJ61BT11 - A1SJ61BT11 Users Manual*

IB(NA)66722

AJ61QBT11 - A1SJ61QBT11 Users Manual*

IB(NA)66781

RS-232 Interface Module AJ65BT-R2

SH(NA)080016

QJ61QBT11 Users Manual*

Note: All manuals come free of charge on the software CD-ROM in Adobe Acrobat Reader format. A free copy of the Acrobat Reader program is also included on the software CD.
If hard copies of the manuals are desired, please refer to the manual model numbers listed.

GX Configurator-DP

GX Configurator-DP is a Windows based programming package allowing the user to graphically design and configure a PROFIBUS
network. GX Configurator-DP then transfers the configuration information to Mitsubishi PROFIBUS modules.
Model Number

Description

Stocked Item

GX-CONFIG-DP-C1

Single user license - can be used on 1 computer at a time. Includes 1 CD-ROM containing both software and electronic
manual. Support PROFIBUS modules include A71PB92D, A1SJ71PB92D and QJ71PB92D

GX-CONFIG-DP-C1-SMA

SMA FOR GX-CONFIG-DP-C1

SH(NA)080127

GX-Configurator-DP PROFIBUS-DP Interface Module Users Manual*

IB(NA)66569

PROFIBUS Interface Module AJ71PB92

Note: All manuals come free of charge on the software CD-ROM in Adobe Acrobat Reader format. A free copy of the Acrobat Reader program is also included on the software CD. If hard copies of the manuals are
desired, please refer to the manual model numbers listed.

GX Configurator-AP

Sold as a separate configuration utility software title, GX Configurator-AP is used to configure and maintain systems
using the AD75M family of motion control modules.
Model Number

Description

Stocked Item

GX-CONFIG-AP-C1

Single user license - can be used on 1 computer at a time. Includes 1 CD-ROM containing both software and electronic
manual. Includes support for AD75P1, AD75P2, AD75P3, AD75P1-S3, AD75P2-S3, AD75P3-S3, AD75M1, AD75M2,
AD75M3, A1SD75P1, A1SD75P2, A1SD75P3, A1SD75P1-P3, A1SD75P2-S3, A1SD75P3-S3, A1SD75M1, A1SD75M2,
A1SD75M3, and AJ65BT-D75P2-D3 (CC-Link device station)

GX-CONFIG-AP-C1-SMA

SMA FOR GX-CONFIG-AP-C1

IB(NA)66900

GX-Configurator-AD Operating Manual*

Note: All manuals come free of charge on the software CD-ROM in Adobe Acrobat Reader format. A free copy of the Acrobat Reader program is also included on the software CD. If hard copies of the manuals are
desired, please refer to the manual model numbers listed.

GXExplorer2
GXExplorer unifies and controls personal computer and PLC project data bi-directionally. Project data can be easily read and written with
intuitive operations. With similar operations, programs can be downloaded or uploaded to a network PLC. Also, PLCdiagnostics, ladder
monitoring, timing charts and device monitoring can be carried out.
Model Number

Description

Stocked Item

GX-EXP2-C1

Single user license - can be used on 1 computer at a time

GX-EXP2-C5

5 user license - can be used on up to 5 computers at a time

GX-EXP2-C10
GX-EXP2-C25

10 user license - can be used on up to 10 computers at a time

25 user license - can be used on up to 25 computers at a time

GX-EXP2-C50

50 user license - can be used on up to 50 computers at a time

538

GX Simulator
As an option to GX Developer or GX Developer-FX, users can add this Ladder Logic Simulator (SIM) program, allowing simulation of
program operation without using a PLC. This is a great way for a programmer to test the functionality of the program, before operating it
on a PLC. Machine responses can be simulated and the normal ladder monitor window can be used in GX Developer or GX Developer-FX to
track execution. Allows you to call a virtual PLC on a PC and debug the sequence program. Debugging can be immediately carried out after
designing without waiting for the PLC input/output wiring. This feature dramatically reduces the backward engineering process. No connection
cables are required for use of this program. GX Developer or GX Developer-FX must be installed prior to installing GX Simulator.
Model Number
GX-SIM-C1
GX-SIM-C1-SMA
GX-SIM-C5
CX-SIM-C5-SMA
GX-SIM-C10
CX-SIM-C10-SMA
GX-SIM-C25
CX-SIM-C25-SMA
GX-SIM-C50
CX-SIM-C50-SMA
IB(NA)0800189
IB(NA)0800193

Description
Single user license - can be used on 1 computer at a time
SMA FOR GX SIMULATOR 1 USER LICENSE
5 user license - can be used on up to 5 computers at a time
SMA FOR GX SIMULATOR 5 USER LICENSE
10 user license - can be used on up to 10 computers at a time
SMA FOR GX SIMULATOR 10 USER LICENSE
25 user license - can be used on up to 25 computers at a time
SMA FOR GX SIMULATOR 25 USER LICENSE
50 user license - can be used on up to 50 computers at a time
SMA FOR GX SIMULATOR 50 USER LICENSE
GX-DEV / GX-SIM Startup Manual
GX-SIM Operating Manual

Stocked Item
S
-

Note: All software programs includes 1 CD containing both software and electronic manuals. Manuals are in Adobe Acrobat Reader format. A free copy of the Acrobat Reader program is also included on the
software CD. If hard copies of the manuals are desired, please refer to the manual model numbers listed. Adobe, Acrobat and their logos are trademarks of Adobe Systems, Inc.

D. Motion Programming Software

MT Works2 (MT Developer2)

MT Works2 is the next generation programming, configuration and maintenance software for Q Series Motion Controllers including the iQ
Platform and Q170MCPU Stand Alone motion controllers. MT Works2 offers a new and intuitive programming, design, and maintenance
environment which can be used across many industries and applications in all the phases of a Motion Controller configuration; system design,
program development, debugging, startup, operation, and maintenance.

SMA

Software

Type

Model Number

Description

Stock Status

MT-WORKS2-C1

Single User License of MT Works2

MT-WORKS2-C5

5 User License of MT Works2

MT-WORKS2-C10

10 User License of MT Works2

MT-WORKS2-C25

25 User License of MT Works2

MT-WORKS2-C50

50 User License of MT Works2

MT-WORKS2-C100

100 User License of MT Works2

MT-WORKS2-C1-SMA

SMA for MT-Works2-C1

MT-WORKS2-C5-SMA

SMA for MT-Works2-C5

MT-WORKS2-C10-SMA

SMA for MT-Works2-C10

MT-WORKS2-C25-SMA

SMA for MT-Works2-C25

MT-WORKS2-C50-SMA

SMA for MT-Works2-C50

MT-WORKS2-C100-SMA SMA for MT-Works2-C100

Notes

These are the part numbers to use if a customer wants to purchase the MT Works2
(MT Developer2) programming software only, without the full iQ Works suite.

These are the part number to order an SMA for the MT Works2 part numbers.
Updates will be provided electronically.

MT Developer2 For MR-MQ100

SMA

Software

Type

Model Number

Description

Stock Status

MT-DEV2-MQ-C1

Single User License of MT Works2

MT-DEV2-MQ-C5

5 User License of MT Works2

MT-DEV2-MQ-C10

10 User License of MT Works2

MT-DEV2-MQ-C25

25 User License of MT Works2

MT-DEV2-MQ-C50

50 User License of MT Works2

MT-DEV2-MQ-C100

100 User License of MT Works2

MT-DEV2-MQ-C1-SMA

SMA for MT-Works2-C1

MT-DEV2-MQ-C5-SMA

SMA for MT-Works2-C5

MT-DEV2-MQ-C10-SMA

SMA for MT-Works2-C10

MT-DEV2-MQ-C25-SMA

SMA for MT-Works2-C25

MT-DEV2-MQ-C50-SMA

SMA for MT-Works2-C50

MT-DEV2-MQ-C100-SMA SMA for MT-Works2-C100

Notes

These are the part numbers to use if a customer wants to purchase the MT Works2
(MT Developer2) programming software for MR-MQ100 only, without the full iQ
Works suite.

These are the part number to order an SMA for the MT Works2 part numbers.
Updates will be provided electronically.

Mitsubishi Electric Automation

Software 539

MSIZE
Servo sizing software package. This software is available for free download on www.meau.com.
Model Number
MSIZE

Description
Servo Sizing Software

Stocked Item
-

MR-Configurator
Supports all operations from servo setup to maintenance. Easily perform various operations, including monitor display, diagnostics, parameter
writing and reading, and test operation.
Model Number
MR-CONFIGURATOR

Description
Servo Configuration Software

Stocked Item
S

MR-Configurator2
Servo setup software that supports 64bit and MELSERVO MR-J4 Series and J3 Series servo systems. The software has an easy-to-use
engineering environment that improves the efficiency in setting, startup and adjustment, and operation and maintenance of the servo amplifier
system with a new servo assistant that guides the user through amplifier setting, test run, and servo adjustments. The assistant can guide with
maintenance and troubleshooting and provides users with helpful tips.
Model Number
MR-CONFIGURATOR2

Description
MR-J3 and MR-J4 Servo Configuration Software

Stocked Item
S

F. HMI Programming Software

GT Works3

GT Works3 is the design and configuration software for the GOT1000 Series HMIs. This revolutionary and intuitive design environment
provides host of attributes and graphical elements needed to quickly and easily develop visualization projects. Data entry fields, dialog windows
even placement aids have been optimize to reduce development time and provide the flexibility every programmer demands. After screen
development is complete, one touch simulation enables developers to debug and verify their projects using real-time variables and conditions.

Software

Type

SMA

n SOFTWARE

E. Servo Sizing and Setup Software

Model Number

Description

Stock Status

GT-WORKS3-C1

Single User License of GT Works3 on 3 CDs

GT-WORKS3-C5

5 User License of GT Works3 on 3 CDs

GT-WORKS3-C10

10 User License of GT Works3 on 3 CDs

GT-WORKS3-C25

25 User License of GT Works3 on 3 CDs

GT-WORKS3-C50

50 User License of GT Works3 on 3 CDs

GT-WORKS3-C100

100 User License of GT Works3 on 3 CDs

GT-WORKS3-OEM

OEM license for GT-Works3 on 3 CDs

GT-WORKS3-C1-SMA

SMA for GT-Works3-C1

GT-WORKS3-C5-SMA

SMA for GT-Works3-C5

GT-WORKS3-C10-SMA

SMA for GT-Works3-C10

GT-WORKS3-C25-SMA

SMA for GT-Works3-C25

GT-WORKS3-C50-SMA

SMA for GT-Works3-C50

GT-WORKS3-C100-SMA SMA for GT-Works3-C100

GT-WORKS3-OEM-SMA

SMA for GT-Works3-OEM

Notes

These are the part numbers to use if a customer only wants to purchase GT Works3
programing software.

These are the part number to order an SMA for the GT Works3 part numbers.
Updates will be provided electronically.

G. Inverter/VFD Setup Software

FR-Configurator
An effective tool to support operations from startup to maintenance of inverters. Parameters can be set and operations can be monitored
efficiently from a PC.
Model Number

Description

Stocked Item

FR-CONFIGURATOR

VFD Setup Software

540

H. Enterprise Solution and Setup Software

MX Component
An Active X control library supporting various Mitsubishi communication paths, from the PC to Mitsubishi PLCs. MX Component enables
the development of a wide variety of applications by supporting various languages, such as Visual Basic, Visual C++, Access, VBA of Excel
and VB Script.
Model Number

Description

Stocked Item

MX-Compon-C1

Single user license - can be used on 1 computer at a time. Includes 1 CD-ROM containing both software & electronic manuals

SH(NA)080270

MX Component Start Up Manual*

SH(NA)080271

MX Component Operating Manual*

SH(NA)080272

MX Component Programming Manual*

Note: All manuals come free of charge on the software CD-ROM in Adobe Acrobat Reader format. A free copy of the Acrobat Reader program is also included on the software CD. If hard copies of the
manuals are desired, please refer to the manual model numbers listed.

MX OPC
OPC is a great way for users wanting to communicate from their PC to Mitsubishi hardware devices. The MX OPC server contains all the
Mitsubishi protocols available to successfully communicate from Mitsubishi hardware devices to any OPC Client, such as MX-WORX. MX
OPC Server is also capable of spanning multiple networks as it relays data to and from the OPC Client. With literally hundreds of connection
methods possible, MC-WORX remains simple to configure using graphical point and click technology. Supported Mitsubishi protocols
include programming port, serial, Ethernet, MELSECNET/10, CC-Link and others. Supported hardware includes FX, A, QnA and Q Series
devices plus selected CNC devices.
Model Number

Description

Stocked Item

MX-OPC-C1

Single user license for Mitsubishi OPC Server - can be used on 1 computer at a time.
Includes 1 CD-ROM containing both software and electronic manual.

MX-OPC-C1-SMA

MX OPC SERVER SINGLE USER LICENSE

MX-OPC-C5

5 user license - can be used on up to 5 computers at a time

Includes 1 CD-ROM containing both software and electronic manual.

MX-OPC-C5-SMA

MX OPC SERVER 5-USER LICENSE

MX-OPC-C10

10 user license - can be used on up to 10 computers at a time

Includes 1 CD-ROM containing both software and electronic manual.

MX-OPC-C10-SMA

MX OPC SERVER 10-USER LICENSE

MX-OPC-C25

25 user license - can be used on up to 25 computers at a time

Includes 1 CD-ROM containing both software and electronic manual.

MX-OPC-C25-SMA

MX OPC SERVER 25-USER LICENSE

MX-OPC-C50

50 user license - can be used on up to 50 computers at a time

Includes 1 CD-ROM containing both software and electronic manual.

MX-OPC-C50-SMA

MX OPC SERVER 50-USER LICENSE

Note: All manuals come free of charge on the software CD-ROM in Adobe Acrobat Reader format. A free copy of the Acrobat Reader program is also included on the software CD. If hard copies of the
manuals are desired, please refer to the manual model numbers listed.

MX-MESInterface
The MESInterface configuration software is used to setup the MESInterface modules for the Q and iQ Platforms.
Model Number

Description

Applicable Hardware

Stocked Item

MX-MESIF-STD-C1

Configuration utility for standard MESInterface.

MESInterface

MX-MES-INTERFC-IT

Configuration utility for MES Interface-IT

MES Interface-IT

I. Robot Software
RT-Toolbox2

RT-Toolbox2 is the primary software package for Mitsubishi robots that utilize CR_-500 and CR_-700 Series controllers. This software
includes a comprehensive set of tool for all major robot programming and configuration tasks. RT-Toolbox2 is Windows based and is
available in two formats, standard- with simulation or lite- without simulation.
Tools include:
System configuration
Simulation (standard version only)
Program edit and Debug
System monitoring
Program conversion
File management
(MELFA Basic IV to MELFA Basic V)
Robot diagnostics
Parameter setting
Robot maintenance
Model Number
RT-TOOLBOX 2-C1

Description
Standard version including simulation tools. Single user license.

Stocked Item
S

RT-TOOLBOX 2 LT-C1

Lite version without simulation tools. Single user license

Mitsubishi Electric Automation

Software 541

n SOFTWARE

MELFA-Works

MELFA-Works is an advanced simulation, design and modeling tool for Mitsubishis A, S, SD, and SQ Series robots. MELFA-Works operates
as an add-on to SolidWorks, a 3rd party 3D CAD Design Software. MELFA-Works leverages the power of SolidWorks enabling complex robot
simulations in existing machine environments. MELFA-Works includes the lite version of RT-TOOLBOX 2 for program creation and debug. In
addition to simulation, a CAD-link function enables program creation from CAD files. Simulated images can be saved as .AVI files for future use
and demonstration
Advanced Functions Include:

Cycle time check

Interference check
3D robot motion simulation
Work piece handling
3D integration to existing cells

Model Number
MELFA-WORKS-C1

Hand / tool simulation

Tool change simulation
Program creation and debug
CAD link function
AVI movie creation

Description
Single user license

Stocked Item
S

MELFA-Vision

MELFA-Vision software is a configuration and programming tool that simplifies the integration of Cognex In-Sight Series vision sensors to
Mitsubishis A, S, SD, and SQ Series Robots. MELFA-Vision allows quick and efficient vision program writing, program transfer and backup,
image capture and calibration. All of this coupled with the dedicated vision commands provided in MELFA-Basic and direct connection via
Ethernet, vision integration is greatly simplified.
Model Number

Description

Stocked Item

MELFA-VISION-C1

Single user license

J. CNC Software
NC Designer
NC Designer software allows for creation of custom operator screens in a Graphical Users Interface (GUI) environment. By using the available
standard parts included in the software you can easily develop original operator screens without any programs. Using the C Language source
generation function of the software, customized functions can be added with the use of C language programming and dedicated libraries.
Model Number

Description

Stocked Item

NC-Designer-C1

Single user license

NC Monitor
This tool allows you to display an identical screen as the NC display on your personnel computer. By connecting your personnel computer
to the NC using Ethernet communications various data can be checked and set on the personnel computer as the operator would set on the
standard HMI Screen.

NC Configurator
With the use of this Parameter Setup Support tool, NC Configurator allows you to edit necessary NC data files such as Machine Parameters, Tool
Data, and Common Variables from your personnel computer. The edited data then can be transferred to the NC via Ethernet Communications.
Model Number

Description

Stocked Item

NC-Configurator-C1

Single user license

NC Explorer
When connecting a personnel computer via Ethernet to a network of machines, the NC Explorer (Data Transfer Tool) allows data
such as Machining Programs, Common Variables, and Parameters can be transferred from machine to machine.
Model Number

Description

Stocked Item

NC Remote Mon-C1

Single user license that contains both NC Explorer and NC Monitor

542