Scribd
Upload
99 views

A. Nassiri - ANL: Dielectrics

The document discusses different types of waveguiding media for millimeter wave frequencies between 30-300 GHz. It describes five broad categories: 1) hollow metal waveguides, 2) planar transmission lines, 3) quasiplanar transmission lines, 4) dielectric integrated guides, and 5) H- and groove-guide structures. Dielectric integrated guides like image guides and nonradiative guides are suited for integrated circuit applications as they have low loss and allow for easy mounting of active devices compared to other transmission line types. Dielectric guides have potential applications in high performance antennas, feed structures, and realizing dynamically controlled devices at frequencies above 60 GHz.

Uploaded by

Dipole Antenna
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
99 views

A. Nassiri - ANL: Dielectrics

The document discusses different types of waveguiding media for millimeter wave frequencies between 30-300 GHz. It describes five broad categories: 1) hollow metal waveguides, 2) planar transmission lines, 3) quasiplanar transmission lines, 4) dielectric integrated guides, and 5) H- and groove-guide structures. Dielectric integrated guides like image guides and nonradiative guides are suited for integrated circuit applications as they have low loss and allow for easy mounting of active devices compared to other transmission line types. Dielectric guides have potential applications in high performance antennas, feed structures, and realizing dynamically controlled devices at frequencies above 60 GHz.

Uploaded by

Dipole Antenna
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

Dielectrics

A. Nassiri - ANL

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

Historical Perspective
1910 : Hondros and Debye Propagation of EM waves along cylindrical
dielectric guides.
1930s : Waveguiding and attenuation characteristics were well
established.
1940s : Investigations on finite length dielectric rod antennas
1950s : Development of dielectric guides for microwave and millimeter
wave integrated circuits.
1960s: Dielectric and dielectric loaded antennas with desirable
properties at microwave and millimeter wave frequencies.
1980s: Class of dielectric surface waveguides as H-guides for use in
higher frequency range.

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

Waveguiding Media for mm waves

mm wave frequencies : 30 to 300 GHz.


5 broad categories of waveguiding media:
1. Hollow metal waveguides.
2. Planar transmission lines.
3. Quasiplanar transmission lines.
4. Dielectric integrated guides.
5. H- and groove-guide structures.

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

Hollow metal waveguides

TE10 mode rectangular waveguides high power transmitting


systems upto 100 Ghz
TE01 mode circular waveguides larger dimension, lower losses
but not a dominant mode, not practical for realizing mm wave
components

0(Air)
(a) Rectangular waveguide

Massachusetts Institute of Technology

(b) Circular waveguide

RF Cavities and Components for Accelerators

USPAS 2010

Planar transmission lines

0
0 r
(c) Microstrip

0
0 r
0
(d) Suspended stripline

Low & medium power applications MIC technology


stripline, slotline, suspended stripline, inverted stripline,
coplanar line.
Simple geometry, easy incorporation of active devices.
mmwave applications require thinner substrates & lower
dielectric constants.
Freq. upto 100 to 140 GHz with careful fabrication.
Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

Quasiplanar transmission lines

0r

(e) Unilateral Fin line

0r

(f) Antipodal Fin line

Low loss & good integration in 30 to 120 GHz.


Quasi-planar tx. line, formed by mounting dielectric
substrate with printed fins on it in the E-plane of a standard
rectangular waveguide.
Eliminates need to maintain tight dimensional tolerances on
inner walls.
Planar technology and easy mounting of active devices.

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

Dielectric integrated guides


a
0
0 r
(g) Image guide

Ground Plane

0
0 r
0

a < o/2

Ground Plane

(h) Nonradiative guide

Previous 3 classes of tx. lines suffer from conductor loss.


Dielectric guides backed by ground planes suited for
Integrated circuit applications.
Image Guide dielectric strip in intimate contact with a
ground plane.
Nonradiative Guide undesirable radiation at bends & other
discontinuities suppressed.
Freq. 30 to 120 GHz, low loss, light weight.
Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

H - and groove-guide structures


a
0

a > o
0

r 0 r
0
(i) H- guide

Ground Plane

(j) Groove guide

Class of surface wave guiding structures.


Basic H guide resembles that of the nonradiative guide except that a greater
than a wavelength.
It makes use of surface wave guidance at the dielectric interface in one
transverse direction and field confinement by parallel plates in the other.
Supports a hybrid mode, both E and H having a component in the direction of
propagation.
No longitudinal current flow on the metal walls.
Low propagation loss.
Freq. 100 to 200 GHz.

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

Operation of H guides beyond 200GHz limited due to multimode


propagation.
Overcome in the groove guide
Groove region creates a surface wave effect and supports a slow wave
effect and supports slow wave propagation.
Freq. 100 to 300 GHz
Single mode operation with low propagation loss.
A broad comparison of the different categories of tx. Lines for mm
wave integrated circuit applications has been provided above in order to
indicate the relative utility of the dielectric integrated guides with
reference to other guides.

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

Wave Guidance in Open Homogenous Dielectric Guides

y
x 2d

0 r
z

y
x

2b
z

0 r

d=2a
z

2a
Slab dielectric guide

Massachusetts Institute of Technology

Rectangular dielectric
guide

0 r

Circular dielectric
guide

RF Cavities and Components for Accelerators

USPAS 2010

10

TE0 ,TM0

0 r

0 r

TE1 ,TM1

Transverse distribution of Ex component for TE modes and Hx component for


TM modes in a slab dielectric guide.

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

11

E - line

H - line

y
0 r
x

Ey11 mode field distribution in rectangular dielectric guide

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

12

E - line

H - line

0 r

Dominant HE11 mode field distribution in cylindrical dielectric


guide

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

13

Typical mm wave dielectric materials:

Ceramic dielectrics
Polymer dielectrics
Castable dielectrics
Dielectric Pastes for Thick-Film Process
Semiconductor Dielectrics
Various Ferrites

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

14

Application Potential

Most widely used guide structures in component


development are image guides.
Best potential at freq above 60GHz
Use of dielectric H-guide and groove-guide structures at for
freq. beyond 100GHz.
Realizing high-performance antennas.
Feed structures for array antennas.
Incorporation of active devices in dielectric guides is more
difficult than in suspended striplines or fin lines
Realizing dynamically controlled devices such as switches,
phase shifters and attentuators.

Massachusetts Institute of Technology

RF Cavities and Components for Accelerators

USPAS 2010

15

You might also like