Doosan Infracore Generator Engine: Ratings (KWM/PS)
Doosan Infracore Generator Engine: Ratings (KWM/PS)
Doosan Infracore Generator Engine: Ratings (KWM/PS)
P158LE
Gross Engine Output
Ratings
( kWm/PS)
Standby
Prime
Standby
Prime
1500rpm(50Hz)
414/563
363/494
400/544
349/475
1800rpm(60Hz)
458/623
402/547
435/592
379/516
Ratings Definitions
The power ratings of Emergency Standby and Prime are in accordance with ISO 8528.
Fuel Stop power in accordance with ISO 3046.
STANDBY POWER RATING is applicable for supplying emergency power for the duration of the utility power outage.
No overload capability is available for this rating. A standby rated engine should be sized for a maximum of an 70% average
load factor and 200 hours of operation per year. This includes less than 25 hours per year at the Standby Power rating.
PRIME POWER RATING is available for an unlimited number of hours per year in variable load application. Variable load
should not exceed a 70% average of the Prime Power rating during any operating period of 250 hours. The Total operating
time at 100% Prime Power shall not exceed 500 hours per year. A 10% overload capability is available for a period of 1 hour
withing a 12 hour period of operation. Total operating time at the 10% overload power shall not exceed 25 hous per year
GENERAL ENGINE DATA
Engine Model
P158LE
Engine Type
Bore x stroke
128 x 142 mm
Displacement
14.618 liters
Compression ratio
15 : 1
Rotation
Firing order
1-5-7-2-6-3-4-8
Injection timing
161 BTDC
Dry weight
Dimension (LxWxH)
SAE NO.1M
Fly wheel
Clutch NO.14M
160
ENGINE MOUNTING
Maximum Bending Moment at Rear Face to Block
1,325 N.m
EXHAUST SYSTEM
Maximum Back Pressure
5.9 kPa
2.16 kPa
6.23 kPa
0.125 kPa
COOLING SYSTEM
Water circulation by centrifugal pump on engine.
Cooling method
Coolant capacity
Pressure Cap
Max. 49 kPa
Water Temperature
- Maximum for standby and Prime
103
40.0
Water pump
Wax pellet type, Opening temp. 71C , Full open temp. 85C
Cooling fan
Not available
LUBRICATION SYSTEM
Force-feed lubrication by gear pump, lubricating oil cooling in cooling water circuit of engine.
Lub. Method
Oil pump
Oil filter
Oil capacity
120
Angularity limit
Lubrication oil
FUEL SYSTEM
Bosch type in-line pump with integrated, electromagnetic actuator.
Injection pump
Governor
Electric type
Speed drop
Feed pump
Injection nozzle
Opening pressure
27.9 MPa
Fuel filter
10 kPa
60 kPa
315 liters / hr
Used fuel
ELECTRICAL SYSTEM
Battery Charging Alternator
Voltage regulator
Starting motor
Battery Voltage
Battery Capacity
VALVE SYSTEM
Type
Number of valve
Valve timing
Opening
Close
-. Intake valve
24 deg. BTDC
36 deg. ABDC
-. Exhaust valve
63 deg. BBDC
27 deg. ATDC
PERFORMANCE DATA
Prime Power
Standby Power
rpm
1500
1800
1500
1800
rpm
800
800
800
800
rpm
1650
1980
1650
1980
kW
363
402
414
458
PS
494
547
563
623
1.99
1.84
2.27
2.09
m/s
7.1
8.5
7.1
8.5
Friction Horsepower
kW
32
44
32
44
PS
43.5
59.8
43.5
59.8
25% load
liters/hr
23.7
28.0
26.5
30.5
50% load
liters/hr
43.9
50.6
49.6
57.6
75% load
liters/hr
65.1
74.7
74.8
85.9
100% load
liters/hr
89.3
102.5
102.9
118.6
346
383
394
436
14
23
14
23
98.5
98.3
98.5
kW
dB(A)
98.3
The all data and the specific fuel consumption are based on ISO 3046/1, Standard reference conditions are in accordance
with 298 K(25 Celsius) air temperature, 100kPa(1000mbar) air pressure, 60% relative humidity, 110m(361ft) altitude.
Operation At Elevated Temperature And Altitude: The engine may be operated at :
1800 rpm & 1500rpm up to 750~ 1000m and 30C without power deration
For sustained operation above these conditions, derate by 3% per 304m , and 2% per 11 C
Engine Data with Dry Type Exhaust Manifold
Intake Air Flow
26.2
33.7
29.1
36.9
580
606
m3/min
78.3
91.3
kW
314.7
361.2
362.6
417.9
kW
136.8
157.0
157.7
181.7
kW
73.0
83.8
84.1
96.9
kW
31.9
36.6
36.8
42.4
liters/min
535
600
535
600
m3/min
522
618
522
618
m3/min
ENGINE DIMENSION
CONVERSION TABLE
in. = mm x 0.0394
PS = kW x 1.3596
psi = kg/cm2 x 14.2233
in3 = lit. x 61.02
hp = PS x 0.98635
lb = kg x 2.20462
kW = kcal/sec x 0.239