Table of Contents

Precaution....2
Preparation..4
z Standard accessories....4
z Parts Names & Functions.....5
z System requirements........6
z Technical Specifications6
Use on iOS/Android Device by Wifi.7
z Download App.....7
z Connect to iOS/Android Device....8
z Preview.....11
z App Icon Definitions12
z Change Password13
z Setup Date/Time14
z Delete a Microscope15
Install the microscope to Stand.....16
How to get focus19
Install Software on PC..20
Start Microscope.21
Software functions..22
z Capture Photo...22
z Capture Video...22
z Timer..23
Calibration and Measurement....24
z Calibration..24
z Measurement28
z Change Calibration....28
z Draw and text32
Software Interface Instructions.....33
1

z
z
z
z
z

Main Interface Icons....33

Main Menu.34
Options..35
Capture..36
Measurement Interface Instruction37

Welcome
Thank you for your choice of our product - it is a high-tech
while easy to use Wifi Digital Microscope. With this unit
you will see a unique and bigger world via iOS/Android
devices.
Its easy to zoom in on stamps, coins, paper currency,
plants, insects, skin, fabrics, rocks and minerals, and so
much more.
We recommend reading this manual first to get the best
out of this unit.

1. Precaution
Before using the Wifi Digital Microscope, please ensure
that you read and understand the safety precautions
described below. Always ensure that the Wifi Digital
Microscope is operated correctly.
z The Microscope is not waterproof, so keep it dry.
z Do not use it in a humid place like bathrooms. A dry
environment will maintain its life to maximum.
z Use the Microscope only at -5-50.
2

z
z
z
z

Sudden temperature change may form dew inside

the Microscope like entering a warm room in cold
winter. Put it inside a handbag or plastic bag to slow
down temperature changes.
Do not point Microscope lens to the sun or strong
light for a long time. Powerful light may hurt the
light-sensitive electronics.
Avoid touching the lens.
The white LEDs which illuminate the Microscope
target field are very bright. Do not stare directly into
these LEDs as it may damage your eyes.
The clear plastic distance shell sometimes picks up
dirt or toxic material from a microscopically observed
surface. Be careful that this doesnt get in contact
with the human skin. Always wash carefully or
disinfect as needed.

2. Preparation
Standard accessories

Microscope

Stand

AC adaptor

USB cable

QSG

AC adaptor

Calibration Ruler

Cleaning Fabric

 Parts Names & Functions

Part

Meaning

Part

Off/Wifi/USB

LED Dimmer

Charging Indicator

USB
(PC
Charge)

10

LED

Focus Wheel

and

11
5

Meaning
Wheel
(Fixing the movement)

Wheel
(for up/down)

Wheel
(fixing on the pole)
Wheel
(fixing on the stage)
Wheel
(fixing the microscope)

 System Requirements
1. iOS/Android
* iOS 5.1 and later
* Android 4.3 and later
2. PC
* Windows XP / VISTA / WIN7 / WIN8
* P4 1.8 or above
* RAM: 512M
* Video Memory: 64M
* USB port: 2.0
* CD-ROM Drive

Technical Specifications
Image sensor

1 Mega Pixels (true resolution)

Still capture resolution

1280x720 (720P), 640x480 (VGA)

Video capture resolution

1280x720 (720P), 640x480 (VGA)

Magnification Ratio

10x~200x

Focus Range

Manual focus from 0mm to 150mm

Video format

H.264

Photo format

JPEG

Light source

6 LED (adjustable by control wheel)

Rechargeable Li-ion battery

Power source

Working time: 90mins, Charging time: 100mins

Charging power: 5V DC

iOS/Android interface

WiFi

iOS (5.1 and later): WifiCapture

Search and download from App Store
App
Android: WifiCapture, Install from CD, or search and
Download from https://play.google.com/store
PC interface

USB2.0

PC Software

PortableCaptureHD (with measurement)

English, Deutsch, Spanish, Russian, Italian, French,

PC Software Language
Portuguese, Dutch, Polish, Japanese, Korean
PC

Software

OS
Windows XP/Vista/Win7/ Win8

Supported
Microscope: 154mm (L) x 44mm (R)
Size
Professional Stand: 165mm(L) x118mm(W)x12mm (H)

3. Use the Wifi Microscope on iOS/Android Device

1) Download App
iOS:
Search and install WifiCapture from App Store.
Android:
Search

WifiCapture

from

play.google.com/store,

download and install it. Or install WifiCapture from the CD

that comes with the package.

2) Connect the Wifi Microscope to iOS/Android

device. (here we take Android Smart Phone as an
example)
(1) Power on the microscope by sliding the Par1#1 to
WIFI position;
(2) Turn on the Wifi of your iOS/Android Device, search
the Wifi Digital Microscope from the Wifi Device list.
The Wifi Microscope name is WIFICAMxxxx (xxxx
stand for four-digit random number), as follows:
The password to connect the device is 123456789.

(3) Start the installed App, as follows:

(4) Add Camera

Click Add new camera, then click Search.

The searched Wifi Camera will be shown on the Search

result list. Click the Device name (for example, WIFICAM
(OBJ-002864-STBZD).

(5) User name is admin, default password is 123456, and

then the online Wifi Camera is listed.

10

3) Preview
Click the listed Wifi Camera, it starts preview as follows.
The preview can be vertical or horizontal.

11

4) App Interface Icon Definition

Still Image

IQ

Capture

Flip

Video

(Left/Right )

Capture

Flip

Change resolution

(Up/Down)

720P/VGA/QCGA
Screen Rotation

Brightness
(Vertical/Horizontal)

Exit

Contrast
Back to
Default
12

Main

Captured

Captured

Interface

Still Image

Video

Version info

5) Change Password

From the camera list, click

, choose User, and

then input new password. Click Done on the right

corner to confirm the setup.

13

6) Setup Date/Time

From the camera list, click

, choose Time, and

then click use the phone time calibrate devices

clock.

14

7) Delete a Wifi Camera

You can delete an existing Wifi Camera. Press Edit at the
right corner.
(1) For iOS, by sliding (left or right) a target Camera, then
confirm to delete it.
(2) For Android, tick to select a target camera, and then
choose Delete.

15

4. Install the Microscope to the Stand

1) Take the microscope out from gift box gently; put the
carriage stage on a flat surface.
2) Follow the below steps:

Put
pole

the

metal

through

Wheel 10!

Put
pole

the
into

metal
the

female part of
the stage!

16

Rotate Wheel 10
to fix the pole
on the stage!

Put

the

microscope into
the ring of the
stand!

17

Rotate Wheel 11
clockwise to fix
the microscope
on the ring.

(1) Adjust the upper part of the stand to get a proper

height.
(2) Rotate Wheel 9 clockwise to fix the upper part.

18

4How to get focus

Rotate Wheel 8 to
get a rough focus!

Rotate Wheel 6 to
get a fine focus!

Rotate Wheel 7 to
lock or release the
movement!

19

5. Install the Software on PC (Windows)

Insert the driver CD into CD-ROM Drive and this will
automatically display the following interface:

1) Install PortableCaptureHD
Click Install PortableCaptureHD and the installation
wizard will guide you through the whole process.
2) Full users manual can be viewed by clicking Users
Manual.

20

6. Start Microscope
Connect your Microscope to your PC USB port, start the

software by clicking the

icon generated on the

desktop after installation and you will see the following

screen pop up.

When the Microscope is disconnected from your PC

USB port, the following message will pop up.

21

7. Software Functions
Capture Photo

a. Click Photo shortcut icon

in the main menu

bar.
b. Click Capture > Photo.

Capture Video

a. Click Video shortcut icon

bar.
b. Click Capture > Video.

22

in the main menu

 Timer (Photo / Video)

in the main menu bar.

Click Timer shortcut icon

* Under Timer photo, you can set the start time, interval
time and total picture number.
* Under Timer video, you can set the start time, interval
time and total video number.

23

 Calibration and Measurement

Please make calibration before measurement.
Calibration
Display Crossing from Options>Crossing.

Microscope default at crossing on

Its used to check the dial on the calibration ruler.

24

1. Focus microscope on the attached calibration ruler

and then adjust the magnification till the picture
is clear. Take a picture for the selected area when the
dial is parallel to the crossing as below.

2. Double-click on the picture to enter into measurement

interface as below.

25

3. Click Calibration icon

, and then move mouse

to the picture. Click on the beginning and ending points

across a known value. Now a dialog will popup as below
and you need to enter the exact value of the
measurement sample into Actual dimension.
Then the software will automatically calibrate the
magnification rate. Click OK and the adjusted
magnification rate will show in the upper right corner.

* Remark: The measured line should be paralleled.

26

4. Now you can use Any angle Line under Measurement

icon

to measure the value again. If the value

you measure by software is nearly the same as the exact

value of the dial means the calibration finish.

27

Measurement
Double-click on the picture to enter into measurement
interface. Under the Measurement icon

, you can

choose any desired options to measure.

1. Any Angle Line Measurement
Simply click from one point and drag to the next point, and
then release the click.
2. Continuous Line Measurement
The Continuous Line measurement allows you to
measure any continuous desired length.
Simply click and drag from one point to other desired
points, and then release the click.
3. Radius Circle Measurement
Simply click and extend out to the desired radius, the
radius, circumference and area of the circle will show up
accordingly.
4. Diameter Circle Measurement
Simply click and extend out to the desired diameter, the
diameter, circumference and area of the circle will show
up accordingly.
5. Three Points Angle Measurement
Simply define any three points angle and click, the angle
value will then display.
28

Change Calibration
If you need to change the magnification rate and adjust
focus to capture picture, please calibrate the
magnification rate again.

1. Double click to open the picture, Click

>

Reset magnification > Reset picture magnification as

below. And then start calibration again (Calibration details
please refer to page37).

29

2. Change the magnification rate and capture several

pictures, click on the picture to enter into measurement

interface. And click

> Set magnification > Set

picture magnification, now a dialog will show up as below;

enter the magnification rate into the dialog and click OK.

30

3. If you want to use the same magnification rate to

capture pictures, just click

> Set magnification

>Set capture magnification. Now all pictures will use the

same magnification rate and you can start measurement
directly.

31

Draw and Text

You can draw or add a text on the picture and save for
later analysis.

1. Click icon

to choose any kinds of drawing

under the pull-down manual as below.

2. Click icon

and set the font for the text in the

popup dialogue as below.

32

8. Software Interface Instructions

Main Interface Icons

Capture photo Its used to capture photo one

by one.
Start / Stop record video.
Timer for photo / video Set the start time,
interval time and total photo/video number.
Full screen mode,
Press ESC or double-click to exit.

33

Main Menu
File

Photos Directory: set the directory to store photos

taken;
Videos Directory: set the directory to store video taken;

34

Options

Resolution: change preview size

Date/Time: set to display system date/time on preview
window
Language: choose different OSD language
Crossing: display cross on preview window
Full-screen mode: enter into full screen. Click ESC or
double click to exit

35

Capture

Photo: take a photo

Video: record a video clip

36

Measurement Interface Instructions

Save as

Redo

Copy to
clipboard

Draw

Copy file

Text note

Previous

Measurement

Next

Calibration

Undo

37

This symbol on the product or in the

instructions means that your
electrical and electronic equipment
should be disposed at the end of its
life separately from your household
waste. There are separate collection
systems for recycling in the EU.
For more information, please
contact the local authority or your retailer where you
purchased the product.

38