Scribd
Upload
234 views2 pages

Alarm Nokia Command

The document lists various commands used in OKIA BSC to check status and alarms, lock/unlock sites and equipment, and modify configurations. Some key commands include ZEEI to check status of all sites; ZEOL to check alarms of a particular site; ZEFS and ZEQS to lock/unlock BCFs and sectors; and ZAHP to view alarm history of the BSC.

Uploaded by

Usni Tongyu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
234 views2 pages

Alarm Nokia Command

The document lists various commands used in OKIA BSC to check status and alarms, lock/unlock sites and equipment, and modify configurations. Some key commands include ZEEI to check status of all sites; ZEOL to check alarms of a particular site; ZEFS and ZEQS to lock/unlock BCFs and sectors; and ZAHP to view alarm history of the BSC.

Uploaded by

Usni Tongyu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

OKIA BSC COMMANDS

1.
ZEEI ;
- used to show the status of a
ll sites in BSC
2.
ZEEI :BCF=(bcf no); - used to check status of particular BCF
3.
ZEOL:(BCF NO);
- used to check alarm of particular Site.
4.
ZQSI ;
- used to check status of X.25
link
5.
ZNEL;
- to check status of all TCSM.
6.
ZEFS:(bcf no):L/U;
- used to lock/unlock BCF.
7.
ZEQS:BTS=(BTS no):L/U; - used to lock and unlock sector.
8.
ZERS:BTS=(BTS no):TRX=(TRx no):L/U; Used to lock/unlock individual
TRx
9.
ZEFR:BCF NUM:OMU/SITE; OMU/SITE RESET
10.
ZAHO:ET,(ET.no) ; - To check alarm on ET. 30,37
11.
ZUSC:ET,E.no:BL/WO; - Used for making ET block and working.
12.
ZDTF:TCSM,E.no ; - State checking of ET.
13.
ZEEL; -To see no. of calls continuing in a BSC
14.
ZAHO; -To see all BSC related alarm
15.
ZEOL:(BCF no); -To see all alarm related to one BCF
16.
ZEOH:::BCF=BCF num; To see alarm history of a site
17.
ZEOL::NR=7706; -To see all sites having OMU blocked
18.
ZEOL::NR=7704; -To see all sites having PCM blocked
19.
ZEOL::NR=7705; -To see all sites having LAPD failure
20.
ZEOL::NR=7411; -To see all sites on battery
21.
ZQUS(Enter twice):BCF=(BCF no):TRE=1:2;7(Enter)1(Enter)200(Ente
r) - To know the
receiving power of a PDH link :ODU:
22.
ZEEL:BCF(Enter)Select Option; -To know the blocked BCF/BTS/TRx
category
21.
ZIGO; - To know the MML application done with BSC since the last two
remote session
23.
ZYEF:ET,(ET no); - Checking loop in ET
24.
ZEOH:yy-mm-dd:hh-mm-ss:bcf=(bcf no); - Alarm related to particu
lar date and time
25.
ZYMO:ET,E.no ; - to check slips on ET
26.
ZZZZ; - to terminate a remote session
27.
ZDSB:::PCM=(ET no); - To find BCF no from a ET no/ Shows D cha
nnel details
28.
ZDTI:::PCM=(ET num); -To find D channel details
29.
ZEOH::NR=7767; -To see the alarm num history in BSC for the l
ast 00.00.00 hours
30.
ZEOL::NR=7767; -To find out the sectors down in one BSC
31.

ZQSC(ENTER)
QSC:0(ENTER)
QSC:0,UNL;(ENTER)
Command to change physical a

ddress
ZQSC(ENTER)
QSC:1(ENTER)
QSC:1,UNL;(ENTER)
32.

ZQLG(ENTER)
QLG:0(ENTER)
QLG:0;X2(ENTER)
QLG:0:X25:UNL;(ENTER)
Command to change li

nkage
ZQLG(ENTER)
QLG:1(ENTER)

QLG:1;X2(ENTER)
QLG:1:X25:UNL;(ENTER)
Comment- If the X.25 link of BSC is locked from remote end the this command is
used to unlock the X.25 link from local BSC end. Then both the command (28,29)
should be executed
33.
in use
34.
35.

ZDSB:::PCM=(ET NO); To know wheather a ET is in use or not


ZWUP:ET NUM;
ZQNI;

- To know a

ET type(TCSM/Abis)
-To know the numerical ID of a BSC

36.
ZQRI:OMU;
-To know the local IP allotted to BSC
37.
ZAHP:::yyyy-mm-dd; -To know the alarm history of BSC
38.
ZERO:BCF=(BCF NUM); -To know the TSC value for each trx
39.
ZQWL:BCF=76; TO know the Q1 address of FIU s present in a sit
e
40.
ZEFO:BCF ID:IOP; To know the alarm configuration in a bts site
41.
ZEFX:BCF NUM:INBR=alarm number:POL=OPEN/CLOSE; To change polari
ty of an external alarm
42.
ZEFE: -External Alarm text modification command
43.
ZDTC: D-channel name: BL/ WO; To change the state of D-channel
44.
ZERC: Trx creation
45.
ZERD: Trx Deletion (trx should be locked before deletion)

You might also like