Full PVC Footwear

5
Full PVC Footwear

PRODUCT CODE
: 301201005
QUALITY AND STANDARDS
: (1)
(2)
PRODUCTION CAPACITY
: Quantity: 75,000 Pairs

Value: RS. 41,25,000
MONTH AND YEAR

OF PREPARATION
: January,2003
PREPARED BY
: Small Industries Service Institute,

Kanjani Road,
Ayyanthole,
Thrissur-680003 (Kerala)
INTRODUCTION
Full PVC Footwear such as Chappal,
Sandals and Shoes are popular in Indian
Market due to their cheap prices,
durability and easy maintenance and
affordability by a common man. Used
PVC footwear containing basic rawmaterial i.e. PVC can again be used for
making cheaper types of footwear. The
plant and machinery and raw materials
are available indigenously. The PVC
Footwears are generally light weight and
very comfortable to wear in rainy seasons.
MARKET POTENTIAL
PVC Footwears were introduced in
1964 and it gained momentum in 1967.
Initially, plants and moulds were being
imported generally of multisation type.
Although the capacity creation was
restricted due to shortage of rawmaterial, additional capacity continued
PVC Sandals IS 2167:1972

PVC Industrial Boots
IS 12254:1993
to be created with indigenously available

two-station machinery and moulds. The
capacity at present is estimated 300
million pair per annum. There is scope
for setting up these units in rural and
backward areas using PVC granules in
combination units PVC Scrap materials.
B ASIS AND PRESUMPTIONS

It is proposed to manufacture 250
pairs per day on single shift basis of 8
hours duration and 25 working days in
a month.
The project may take 3 year to achieve
full capacity utilisation depending on
various factors.
Labour charges has been given on
per month basis including 15% of
perquisites for 25 working days.
The rate of interest for both fixed and
working capital is assumed at 18% per
year.
36
FULL PVC FOOTWEAR
The entrepreneur is expected to raise

20 to 25% of the capital as margin
money.
The operative period of the project
may be given 10 to 15 years considering
obsolescence of technology.
The loan may be paid back within 10
years.
IMPLEMENTATION SCHEDULE
It is assumed that the rented building
is available in the area of implementation
of the Scheme for the entrepreneur.
Considering the remaining activities, a
tentative schedule of implementation is
given below:
Sl. Activity
Duration
No.
(in Week)
1. Arrangement of
1st to 8th
Finance
2. Arrangement of
8th to 30th
Electric Supply
3. Procurement of
15th to 30th
Machinery
4. Selection of personnel 20th to 30th
5. Installation of
30th to 38th
Machinery
6. Trial Production
39th to 40th
7. Commencement of
40th
Commercial Production
The unit is expected to start commercial
production from 40th week onwards.
TECHNICAL ASPECTS
Process of Manufacture
As per the design of the sample, PVC
Footwear to be manufactured, the
moulds are obtained and fitted in the
machine. Then the PVC compound is
fed according to requirement into a
heated cylinder from sopper either in

strip, granular or powder for m.
Ceramular form is more common. The
Injection Cycle starts with closing and
locking of the moulds under pressure
either applied by hand or mechanical
levers or automatically by hydraulic or
pneumatic power. When PVC in the
cylinder is sufficiently softened by heat,
the same is forced forward by ram or
screw action through an intermediate
channel known as SPRUE into the
mould until it has cooled down to a state
of sufficient rigidity and the pressure in the
mould relaxed. The time cycle, therefore,
can be adjusted into several stages,
namely, mould filling time, dwell time under
pressure, cooling time and mould opening
time. The cooling time usually is the
longest of all and has to be cut especially
in small machine and the same has been
recommended in the project.
PVC compounds are available as
natural/transparent granules. Prior to
use, colour concentrate granules known
as master batches are mixed with the
natural PVC Compound in the required
proportion to give the desired colour.
Initial mixing can be done in any
convenient container units, a scoop or
small showel. The final mixing is
automatically achieved in the cylinder
of the moulding machine.
The PVC compound, suitably mixed
with the master batch is fed into the
sopper of the machine. Normally 10 to
12 kg. PVC compound are fed at a time.
Shore hardness of 70 to 78 for PVC
granules temperature of 160oC and
pressure of 80 lbs/square inch gives
satisfactory results.
The main operations are:
1. Feeding of PVC granules into the
sopper
FULL PVC FOOTWEAR
2.
3.
4.
5.
Trimming of surplus materials

Cleaning and spraying (if required)
Fixing of fittings
Checking and Packing.
Quality Control and Standards

Following specifications are followed
to customers requirements:
1) PVC Sandals
IS 2167:1972
2) Polyvinyl Chloride Resins Method
of text IS 4669:1968.
Production Capacity
Quantity
Value
Sl. Description
No.
30,000
4. Cost of Office
Equipments,
Working Table,
Racks, Trollies,
Stools etc.
60,000
5. Electrification and
installation charges
@ 10% cost
of machinery
90,000
Total
11,40,000
60,000
12,00,000
B. Working Capital (per month)

2 KW.
(i) Personnel (per month)

Sl. Designation
No.
Pollution Control
There is no pollution in the
manufacturing of PVC Footwear.
FINANCIAL ASPECTS
A. Fixed Capital
(i) Land and Building
i)
Land
500 Sq.Mtr.
ii)
Built-up area
400 sq.mtr.
Rented per month
Rs. 6,000
No.
Salary
(Rs.)
Total
(Rs.)
1. Manager
4,000
4,000
2. Engineer
Mechanical/Electrical
4,000
4,000
3. Designer
3,000
3,000
4. Supervisor
2,500
5,000
5. Accountant/Cashier
2,500
25,00
6. Clerk-cum-typist
2,000
2,000
7. Chowkidar
1,500
1,500
8. Skilled Workers
2,000
6,000
9. Un-skilled Workers
1,500
9,000
(ii) Machinery and Equipments
2. Cost of Moulds
4 Sets each
consists of four
sizes sandal
and shoes
Value
(Rs.)
3. Tools and
Equipments/
Jigs and Fixtures
Total
Motive Power
1. Six Station PVC

Injection Moulding
Machine fully
automatic Rotary
Type
Qty.
Nos.
(iii) Pre-operative Expenses
: 75,000 pair
: Rs. 41,25,000.
Sl. Description
No.
Imp./
Ind.
Total
IMP./
Ind.
Qty.
Nos.
Ind.
Value
(Rs.)
37,000
15% Perquisites on Total Salary
8,00,000
5,550
Total
42,550
Say
42,500
(ii) Raw Material (per month)

1
1,60,000
Sl. Description
No.
Qty.
1. PVC Granules
2,800 kg
2. Master Batch
(Colour)
55/kg.
Rate
(Rs.)
Value
(Rs.)
50/kg 1,40,000
60/kg
3,300
37
38
FULL PVC FOOTWEAR

Sl. Description
No.
Qty.
3. Fittings,
6250 pairs
Buckles, Button
and Lacer etc.
4. Packing
Materials
6,250
pairs
Rate
(Rs.)
Value
(Rs.)
3/kg
18,750
Power 2,500 kWH
ii)
Water
70% - 80%
FINANCIAL ANALYSIS
(1) Cost of Production (per annum)
2/pair
12,500
Sl. Description
No.
Amount
(Rs.)
Total
1,74,550
1. Total Recurring Expenditure
Say
1,74,500
2. Depreciation on Machinery @ 10%
90,000
(Rs.)
3. Depreciation on Tools-dies @ 25%
47,500
4. Depreciation on Furniture @20%
12,000
(iii)Utilities (per month)

i)
MACHINERY UTILISATION
3,750
250
Total
5. Interest on Total Investment @ 18% 3,46,100

Total
4,000
(iv) Other Contingent Expenses (per month)
28,92,000
33,87,600
(2) Turnover (per annum)
Sl. Description
No
Value
(Rs.)
Sl. Item
No
1. Rent
6,000
2. Repair and Maintenance
1,000
1. PVC Shoes
and Sandals
3. Postage and Stationery
3,000
4. Travelling Expenses
2,000
= Total Turnover Cost of Production
5. Consumable Stores
1,500
= Rs. 41,25,000 33,87,600
6. Advertisement and Publicity
2,000
= Rs. 7,37,400
7. Insurance
500
8. Sales Expenses
2,500
9. Misc. Expenses
1,500
Total
20,000
(v) Total Working Capital (per month)

Sl. Description
No
Amount
(Rs.)
1. Personnel
42,500
2. Raw Material
1,74,500
3. Utilities
4,000
4. Other Contingent Expenses

Total
20,000
2,41,000
Qty.
Rate
(Rs.)
75,000
pairs
55/pair
(4) Net Profit Ratio

= Net Profit x 100
Turnover per annum
= 7,37,400x100
41,25,000
= 17%
(5) Rate of Return on Total Capital Investment
= Net Profit x 100
Total Capital Investment
= 7,37,400x100
19,23,000
= 38%
(6) Break-even Point
C. Total Capital Investment
Fixed Cost (per annum)

Amount
(Rs.)
1. Fixed Cost
12,00,000
2. Working Capital for 3 months

Total
7,23,000
19,23,000
41,25,000
(3) Net Profit (per annum)
(vi) Total Working Capital (for 3 months) Rs. 7,23,000
Sl. Description
No
Value
(Rs.)
Sl. Description
No
Amount
(Rs.)
1. Depreciation on Machinery
and Equipments
90,000
2. Depreciation on tools, dies

and equipments
47,500
FULL PVC FOOTWEAR

Sl. Description
No
Amount
(Rs.)
3. Depreciation on Furniture
12,000
4. Interest on total Investment
3,46,100
5. 40% of Salary Wages
2,04,000
6. 40% of other Contingent expenses

(excluding rent)
67,200
7. Rent
72,000
Total
8,38,800
B.E.P.
= Fixed Cost x 100
Fixed Cost +Profit
= 8,38,800 x 100
8,38,800+7,37,400
= 8,38,800 x100
15,76,200
= 53%
Addresses of Machinery and

Equipment Suppliers
1. M/s. Indian Hydraulic Industries,
70, Najafgarh Road,
New Delhi 15
2. M/s. J.K Traders & Engineering,
Industrial Area, Kirti Nagar,
New Delhi 15
3. M/s. Ambika Dies and Moulds
B-217, Naraina Industrial Area,
Phase-1, New Delhi 28
4. M/s. National Engineering Works

New Nagapada Road,
Mumbai-8
5. M/s. R.H. Windser India Ltd.,
E-7, U. Road,
Thana Indl. Estate,
Mumbai.
Raw Material Suppliers
1. M/s. Pioneer Plastic Industries,
Industrial Estate, Okhla,
New Delhi 20
2. M/s. National Organic Chemical
Industries Ltd.
Worli, Mumbai 18
3. M/s. Calico Plastic and Chemicals
Anik Chamber,
Mumbai 400 074
4. M/s. Chemicals and Plastic,
Mettur, Tamil Nadu
5. M/s. Kundatia Industries,
No. 69, Najafgarh Road,
New Delhi.
6. M/s. Omega Polymicrons Pvt. Ltd.
Meerut Road,
Mawana- 250401
Meerut (U.P.)
39

Full PVC Footwear

Uploaded by

Copyright:

Available Formats

Full PVC Footwear

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Full PVC Footwear

Uploaded by

Copyright:

Available Formats

5

Full PVC Footwear

QUALITY AND STANDARDS

: Quantity: 75,000 Pairs

MONTH AND YEAR

: Small Industries Service Institute,

PVC Sandals IS 2167:1972

to be created with indigenously available

B ASIS AND PRESUMPTIONS

FULL PVC FOOTWEAR

The entrepreneur is expected to raise

heated cylinder from sopper either in

FULL PVC FOOTWEAR

Trimming of surplus materials

Quality Control and Standards

B. Working Capital (per month)

(i) Personnel (per month)

Rented per month

(ii) Machinery and Equipments

1. Six Station PVC

(iii) Pre-operative Expenses

15% Perquisites on Total Salary

(ii) Raw Material (per month)

FULL PVC FOOTWEAR

Power 2,500 kWH

1. Total Recurring Expenditure

2. Depreciation on Machinery @ 10%

3. Depreciation on Tools-dies @ 25%

4. Depreciation on Furniture @20%

(iii)Utilities (per month)

5. Interest on Total Investment @ 18% 3,46,100

(iv) Other Contingent Expenses (per month)

(2) Turnover (per annum)

2. Repair and Maintenance

3. Postage and Stationery

= Total Turnover Cost of Production

= Rs. 41,25,000 33,87,600

6. Advertisement and Publicity

(v) Total Working Capital (per month)

4. Other Contingent Expenses

(4) Net Profit Ratio

C. Total Capital Investment

Fixed Cost (per annum)

2. Working Capital for 3 months

(3) Net Profit (per annum)

(vi) Total Working Capital (for 3 months) Rs. 7,23,000

2. Depreciation on tools, dies

FULL PVC FOOTWEAR

4. Interest on total Investment

5. 40% of Salary Wages

6. 40% of other Contingent expenses

Addresses of Machinery and

4. M/s. National Engineering Works

You might also like