Ciba TINUVIN 292 is a liquid hindered amine light stabilizer for coatings that extends the lifetime of coatings by minimizing defects such as cracking and gloss loss. It can be used in a variety of coatings along with UV absorbers for superior protection against weathering. Recommended concentrations vary depending on the type of coating and whether it is used alone or combined with other components.
Ciba TINUVIN 292 is a liquid hindered amine light stabilizer for coatings that extends the lifetime of coatings by minimizing defects such as cracking and gloss loss. It can be used in a variety of coatings along with UV absorbers for superior protection against weathering. Recommended concentrations vary depending on the type of coating and whether it is used alone or combined with other components.
Ciba TINUVIN 292 is a liquid hindered amine light stabilizer for coatings that extends the lifetime of coatings by minimizing defects such as cracking and gloss loss. It can be used in a variety of coatings along with UV absorbers for superior protection against weathering. Recommended concentrations vary depending on the type of coating and whether it is used alone or combined with other components.
Ciba TINUVIN 292 is a liquid hindered amine light stabilizer for coatings that extends the lifetime of coatings by minimizing defects such as cracking and gloss loss. It can be used in a variety of coatings along with UV absorbers for superior protection against weathering. Recommended concentrations vary depending on the type of coating and whether it is used alone or combined with other components.
Ciba TINUVIN 292 is an excellent general purpose liquid hindered amine light stabilizer especially developed for coatings. Its cost efficiency provides significantly extended life time to coatings by minimizing paint defects such as cracking and gloss loss.
Chemical Name
The active substance is a mixture of:
Bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate and 1-(Methyl)-8-(1,2,2,6,6-pentamethyl-4-piperidinyl)-sebacate
Structure
O N
(CH 2 )8 O
O O
+ O N Molecular Weight
(CH 2 )8 O
O O
508.8 and 369.6
Date first Edition: 1986
Product Name: Ciba TINUVIN 292 Printing Date: October 2000
page 1 of 4
Physical Properties
Appearance: slightly yellow liquid Specific density at 20C: 0.99 g/cm3 Miscibility (g/100 g solution) at 20C: butylcarbitol > 50 butanol > 50 butylacetate > 50 Depanol J1) > 50 ethylglycol > 50 1-methoxypropylacetate-2 > 50 methylethylketone > 50 Solvesso 100 2) > 50 Solvesso 150 2) > 50 xylene > 50 water n.m. hexanedioldiacrylate > 50 trimethylolpropanetriacrylate > 50
1)
Trade Mark of Hoechst
2)
Trade Mark of Esso
n.m.= not miscible
The dispersion of TINUVIN 292 in water may be simplified by dilution with a water miscible solvent such as butylcarbitol. Applications
TINUVIN 292 may be used after adequate testing in a broad range of applications such as automotive refinish coatings industrial topcoats coil coatings wood stains or trade sales paints and varnishes radiation curable coatings Its high cost efficiency has been demonstrated in coatings based on a variety of binders such as one- and two-component polyurethanes thermoplastic acrylics (physical drying) thermosetting acrylics, alkyds and polyesters alkyds (air drying) water borne acrylics phenolics, vinyls radiation curable acrylics The weatherability of such coatings can be significantly improved by use of a combination of TINUVIN 292 with a UV absorber, e.g. TINUVIN 1130, TINUVIN 384, or TINUVIN 328. These synergistic combinations give automotive coatings superior protection against gloss reduction, cracking, blistering, delamination and color change. The light stabilizers may be added in two coat automotive finishes to the base and clear coat. The optimum protection should be determined by evaluating a broad range of concentrations. Possible interactions of TINUVIN 292 with paint ingredients such as acid catalysts should be carefully evaluated. Should a negative interaction occur, TINUVIN 123 would be recommended. The optimum additive levels and ratios should be determined from experimental trials covering a range of concentrations.
Date first Edition: 1986
Product Name: Ciba TINUVIN 292 Printing Date: October 2000
page 2 of 4
Recommended Concentrations
Clear coats and
one coat metallic shades:
One coat solid shades:
0.5 - 1.0 % + 1.0 - 3.0 %
TINUVIN 292
1.0 - 2.0 %
TINUVIN 292 alone or in combination
with TINUVIN 1130, TINUVIN 384, TINUVIN 928 or TINUVIN 328
1.0 - 3.0 %
TINUVIN 1130, TINUVIN 384, TINUVIN
928 or TINUVIN 328
Percent by weight of coating resin solids.
Handling & Safety
In accordance with good industrial practice, handle with care and avoid release to the environment. For more detailed information please refer to the material safety data sheet. FOR INDUSTRIAL USE ONLY
Important
The following supersedes Buyers documents. SELLER MAKES NO REPRESENTATION
OR WARRANTY, EXPRESS OR IMPLIED, INCLUDING OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No statements herein are to be construed as inducements to infringe any relevant patent. Under no circumstances shall Seller be liable for incidental, consequential or indirect damages for alleged negligence, breach of warranty, strict liability, tort or contract arising in connection with the product(s). Buyers sole remedy and Sellers sole liability for any claims shall be Buyers purchase price. Data and results are based on controlled or lab work and must be confirmed by Buyer by testing for its intended conditions of use. The product(s) has not been tested for, and is therefore not recommended for, uses for which prolonged contact with mucous membranes, abraded skin, or blood is intended; or for uses for which implantation within the human body is intended.
Date first Edition: 1986
Product Name: Ciba TINUVIN 292 Printing Date: October 2000
