Scribd Logo
Upload

Welcome to Scribd!

  • 66 views

    Module-4, Unit-1 Binary Cell and Memory Unit: Write

    Uploaded by

    Soumik Mukhopadhyay
    The document describes the components and workings of a basic memory system. It contains: 1) A block diagram of a memory with connections for chip enable, read/write, address bus, and data bus. The address bus selects the memory word and the data bus transfers data during read/write operations. 2) An explanation of how a basic memory cell can be made using an SR flip-flop to store a single bit. The flip-flop is enabled via select and read/write signals to perform read and write operations. 3) A design for a 4x4 memory module using SR flip-flops arranged into words selected by a decoder connected to the address bus. The

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Module-4, Unit-1 Binary Cell and Memory Unit: Write

    Uploaded by

    Soumik Mukhopadhyay
    66 views10 pages
    The document describes the components and workings of a basic memory system. It contains: 1) A block diagram of a memory with connections for chip enable, read/write, address bus, and data bus. The address bus selects the memory word and the data bus transfers data during read/write operations. 2) An explanation of how a basic memory cell can be made using an SR flip-flop to store a single bit. The flip-flop is enabled via select and read/write signals to perform read and write operations. 3) A design for a 4x4 memory module using SR flip-flops arranged into words selected by a decoder connected to the address bus. The

    Original Title

    CS222_Lecture_Scribes_module-4_Module-4-unit-1_2016_04_27_15_01_28_846.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the components and workings of a basic memory system. It contains: 1) A block diagram of a memory with connections for chip enable, read/write, address bus, and data bus. The address bus selects the memory word and the data bus transfers data during read/write operations. 2) An explanation of how a basic memory cell can be made using an SR flip-flop to store a single bit. The flip-flop is enabled via select and read/write signals to perform read and write operations. 3) A design for a 4x4 memory module using SR flip-flops arranged into words selected by a decoder connected to the address bus. The

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    66 views10 pages

    Module-4, Unit-1 Binary Cell and Memory Unit: Write

    Uploaded by

    Soumik Mukhopadhyay
    The document describes the components and workings of a basic memory system. It contains: 1) A block diagram of a memory with connections for chip enable, read/write, address bus, and data bus. The address bus selects the memory word and the data bus transfers data during read/write operations. 2) An explanation of how a basic memory cell can be made using an SR flip-flop to store a single bit. The flip-flop is enabled via select and read/write signals to perform read and write operations. 3) A design for a 4x4 memory module using SR flip-flops arranged into words selected by a decoder connected to the address bus. The

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 10

    Module-4, Unit-1

    Binary Cell and Memory Unit

    Question 1: Describe a memory in terms of a basic block diagram.


    Solution 1:
    A memory is basically comprised of rows (called words) and each row is divided into
    cells. Each cell can store a bit. Regarding the I/Os, the memory block has the following
    connections:
    Chip Enable
    Read/ write
    Address Bus
    Data Bus. .
    The figure given below illustrates the basic block diagram of a memory.

    Basic Block diagram of a Memory

    The functionalities of the I/O lines are


    Chip Enable: The contents of memory are only accessible (i.e., read or write)
    when the enable signal is set to 1. If it is set to 0 no Read/Write operation can be
    done on the memory.

    Read/ write : This signal specifies the type of operation to be done on memory Read or Write. If the signal is 0, data is written to the memory and if it is 1, data is
    read from the memory.
    Address Bus: Address Bus is a set of n lines, where 2n is the number of words in
    the memory. The binary value in the address bus specifies the address of the word
    on which the I/O operation is done. To elaborate, the binary value in the address
    bus locates the corresponding word in the memory and its cells can be read
    (written) if Read/ write signal is 1(0). For example, in case of a 4-bit width
    address bus (n=4), if the value sent is 1111, then the 15th memory word is
    accessed.
    Data Bus: A row is called a word and the number of cells in a row is called word
    length. The width of the data bus is k i.e., the word length. Generally speaking,
    word length depends on the unit of the instruction set and/or hardware of the
    processor. The data bus contains the data which is either read from the memory or
    is to be written to the memory for the word which is addressed in the address bus.

    Question 2: How can a simple memory cell be designed using a Flip-Flop? Explain its
    working i.e., reading and writing to the cell.
    Solution 2:
    Flip-flops are one of the basic circuits that can be used as data storage elements. A flipflop stores a single bit of data. It has two states based on the values of its outputs(i) one
    state represents a "one", generally represented as Q 1(Q 0) and (ii) other represents a
    "zero", generally represented as Q 0(Q 1) . It has a CLOCK input. The flip-flop
    retains its state and change happens only at the CLOCK edge. Output state is determined
    based on the input values. Flip-flops generally have two complementary outputs
    i.e., Q , Q . Different types of flip-flops have different inputs. As a flip-flop can retain its
    state it can serve as a store element and a memory cell can be designed using it. The basic
    principle to read the flip-flop is to simply probe the value at Q (and/or Q ) and keep the
    clock stable. On the other hand, the basic principle to write the flip-flop is to apply the
    appropriate inputs (depending on the type of flip-flop) and trigger the clock edge.
    Here we will explain the concepts using SR flip flop. Truth Table for SR Flip-flop is
    given below.
    Inputs
    S
    1
    0
    0
    1

    Outputs
    R
    0
    1
    0
    1

    Q
    1
    0

    0
    1

    Hold
    Not allowed

    The figure below shows a memory cell designed using SR Flip-flop.

    Memory cell designed using SR Flip-flop


    The concept of enabling the memory cell (designed using the S-R flip-flop) and readwrite is explained using the following figures. In these figure the clock is not explicitly
    shown to maintain clarity of the figures.

    1. Memory cell is disabled: No-read/write possible


    I/O signal values: Select = 0 , Read/ write = X , Input = X
    SR = 00: Hold, Output = 0 (irrespective of input)

    Memory cell is disabled

    2. Memory cell Read: Memory cell enabled and is being read


    I/O signal values: Select = 1, Read/ write = 1, Input = X
    SR = 00: Hold, Output = Q i.e., Bit stored in flip-flop.

    Memory cell Read

    3. Memory cell write 1: Memory cell enabled and 1 is being written


    I/O signal values: Select = 1 , Read/ write = 0 , Input = 1
    SR = 10: Set, Output = Q =1. Apply clock edge.

    4. Memory cell write 1: Memory cell enabled and 0 is being written


    I/O signal values: Select = 1 , Read/ write = 0 , Input = 0
    SR = 01: Reset, Output = Q =0. Apply clock edge..

    Question 3: Using the basic memory cells design a 4 x 4 memory module.


    Solution 3:
    1. Each word is a combination of k, 1-bit SR flip-flop (called basic block (BC)),
    where k is the word size. Here k is 4. So each word has 4 BCs.
    2. n address lines (of the address bus) act as n inputs to a n x 2n decoder. The output
    lines of the decoder are fed to the select lines of the BCs. Here as we have 4 rows
    so n=2. A word (i.e., all BCs of that row) is select based on the values of the
    address lines. To elaborate, based on the values of the address lines, one output
    line of the decoder is enabled. All BCs connected to that output line are selected.
    This means that we can perform I/O operations on that word.
    3. Depending on the value of Read/ write , Read or Write operation can be
    performed on each BC of the selected word.
    4. The memory enable input basically activates/deactivates the memory block.
    The figure given below shows the 4 x 4 memory module designed using SR based basic
    cells.

    Question 4: We have a memory module of size 1 KiloBytes. What is the size of address
    and data bus if word size is (i) 8 Bits and (ii) 16 Bits. What would be the changes of the
    memory module is of 1GigaBytes.
    Solution 4:
    i.

    We know that 1 KiloBytes is 1024 Bytes. 1024Bytes is 1024 x 8 Bits. So if the


    word size is 8 bits, then
    a. Data bus is of 8 Bits
    b. There are 1024 words. To access each word we need an address space of
    10 Bits because 210=1024. So address bus is of 10 bits.

    ii.

    We know that 1 KiloBytes is 1024 Bytes. 1024Bytes is 512 x 16 Bits. So if the


    word size is 16 bits, then
    a. Data bus is of 16 Bits
    b. There are 512 words. To access each word we need an address space of 9
    Bits because 29=512. So address bus is of 9 bits.

    iii.

    We know that 1 GigaBytes is 1,073,741,824 (230) Bytes. 1,073,741,824 (230)


    Bytes is 1,073,741,824 (230) x 8 Bits. So if the word size is 8 bits, then
    a. Data bus is of 8 Bits
    b. There are 1,073,741,824 (230) words. To access each word we need an
    address space of 30 Bits because 230=1,073,741,824. So address bus is of
    30 bits.

    iv.

    We know that 1 GigaBytes is 1,073,741,824 (230) Bytes. 1,073,741,824 (230)


    Bytes is 53, 68,70,912 (229) x 16 Bits. So if the word size is 16 bits, then
    a. Data bus is of 16 Bits
    b. There are 53, 68,70,912 (229) words. To access each we word need an
    address space of 20 Bits because 229=53, 68,70,912. So address bus is of
    20 bits.

    You might also like