Phased Array Probes - Doppler

CREATE A RENOWNED
Phased Array Probes Catalogue
WORLD BRAND OF ULTRASOUND
International Cutting Edge Technology

EN12668-2 Standard Compliance
Application for Leading Technical Features
Guangzhou Doppler Electronic Technologies Co.,Ltd.

ADDRoom 104 & 405, Building C, Yushu Industrial Park,
Science City, Guangzhou 510663, China.
TEL(+86)20-8226 0495
FAX(+86)20-8208 6200
E-mailcndoppler@ cndoppler.com
Guangzhou Doppler Electronic Technologies Co.,Ltd.

2012 All rights reserved by Doppler. All specifications are subject to change without notice.
Internal Focused (S)
1.5D Array (M)
2D Array (M)
Convex (V)
Concave (C)
Annular (A)
Annular Sectorial (S)
Variable angle (L)
Skew (S)
Dual linear(S)
Dual 1.5D(S)
NDT
Phased Array Probe
Phased Array Probes Catalogue

Ordering Instructions
P04
Phased Array Probe
P05
Linear SMALL Series
P05
Linear MEDIUM Series

Linear LARGE Series
Linear IMMERSION Series
P06
P07
Matrix 2D/1.5D
P08
Concave
P09
Wedge Integrated
A: Active aperture
P10
gInternal element spacing
Connectors
P12
P11
WElement width
Cable Types
P12
pElementary pitch
Wedge
P13
nNumber of elements in the PA probe
Wedge Specifications And Dimensions

Wedge Characterization Report Template
Probe Characterization Report Template
EElevation
P14
Active aperture: A = n p
P16
Precise active aperture: A = (n - 1) p + W
Near field: N =D /(4)
P17
02/03
Phased Array Probe
Linear (L)
Linear SMALL Series
Conventional Ultrasonic Phased Array transducer frequency is 1MHz ~15MHz. Element quantity is from 8 to 128, custom order
can be up to 1024 elements. In this handbook, contains full information of transducers including Linear(L), Matrix(M),
Annular(A), Concave, Wedge Integrated and so on. Other type of transducers can be customized according to
Features
Tiny outlines
Probe Model Illustration
Cable top or side leads
Frequency Array
type
No.
elements
Pitch
Elevation
Probe
type
U
Casing
type
Cable
jacket
type
Electronic controls beam angle, focusing, and scanning step size

Cable
capacitance
(/m)
Cable
length
Frequency
1=1MHz 2=2MHz 3.5=3.5 MHz 5=5 MHz 7.5=7.5 MHz 10=10 MHz 15=15MHz
Array Type
L(linear) V(convex) C(concave)
Fixed angle & focused probes, without the need of multiple detections
Can detect conventional undetectable areas
S(special)
64=64 Elements
Pitch
Connector
type
Linear SMALL
No. Elements
M (matrix ) A(Annular)
B78 Housing
Replaceable two types of wedges - flatted & curved surfaces
0.8=0.8mmElementary pitch
Elevation
10=10mm
Probe Type
AWedge integrated A45: Integration 45wedgeA0:Integration 0wedge

BWedge un-integrated contact probe (B1,B2)
Applications
B12 Housing
RRadius of concave or convex probeR29Radius 29

Casing Type
Cable Jacket Type
Power: conventional welding inspection, pressure vessels, oil refineries, etc.
IImmersion probe
Cable Capacitance According probe serial

PPVC
UPU ( Required by nuclear industry )
Cable Length
Connector Type
Aviation / Aerospace: Welding, landing gears inspection
M1MOLEX
50=50
PF 60=60
PF 75=75PF H1Hypetronics
90=90PF 110=110PF
78PIN
D1DL-156P
2.0=2.0
m
M2MOLEX
160PIN
D2DL-260P
P1Omni Connector 160PIN
Automotive: engine parts, frames, axles, brake discs.

Conventional: Weldings, Forgings, Castings, Pipes, Bridges & construal steels
C1CONEC 78PIN
Wedge Model Illustration

SB 6 - N
Wedge
type
55
S- I
B1 Housing
Mounting Refraction Wave Irrigation Scanner yoke

method
angle
type
attachment
points
Wedge Type
- AOD
Adjustable
carbide
wear pins
Radius
type
50
Tube
diameter
Probe Specifications and Dimensions

Model
Frequency
Elements
(MHz)
Pitch
(mm)
Active
Aperture Elevation
(mm)
(mm)
SCasing type matched to the wedge
Mounting Method N = Normal

L = Lateral
Refraction Angle 0=045=4555=55
Casing Dimensions
Long (L)
Width (W)
Height (H)
mm
in
mm
in
mm
in
5L10- 0.5*5
10
0.5
0.35
0.31
20
0.79
7.5L8- 0.5*5
7.5
0.5
0.35
0.31
20
0.79
10L16- 0.3*5
10
16
0.3
4.8
0.35
0.31
20
0.79
10L24- 0. 2 * 4
10
24
0. 2
4.8
11
0. 43
25
0.98
Wave Type
S=Share WaveL=Longitudal Wave
4L16- 0.5*9
16
0.5
15
0.59
28
1.10
27
1.06
IHC
I=Irrigation H=Scaner yoke attachment points C=Adjustable carbide wear pins
5L16- 0.6*10
16
0.6
9.6
10
15
0.59
28
1.10
27
1.06
Radius Type
AOD=Axial outside diameter (circumferential scan)
7.5L16 - 0.6*10
7.5
16
0.6
9.6
10
15
0.59
28
1.10
27
1.06
COD=Circumferential outside diameter (axial scan)
10L32- 0.31*10
10
32
0.31
9.92
10
15
0.59
28
1.10
27
1.06
Tube Diameter
Case
Type
B1
B78
B12
50=50mm
04/05
Linear MEDIUM Series
Linear LARGE Series
Features
Features
Cable side leads
Less settings and scanning time
B5 Housing
B 7/9/25 Housing
Electronic focusing Increased sensitivities & Signal-to-noise ratios
Reduction or Exemption of mechanical or manual controls

Wedges may replaceable when Immersion method applied
Applications
B30 Housing
B 26 Housing
Power: conventional welding inspection, pressure vessels, oil refineries, etc.
Power: pressure vessels, Pipelines.
Petroleum: Pipelines, tanks
Automotive: engine parts, frames, axles, brake discs
Aviation / Aerospace: Composites delamination & abhesion,
Conventional: Weldings, Forgings, Castings, Pipes,
welding, landing gears inspection
Bridges & construal steels
Transportation: Composites delamination & abhesion, planks
B10 Housing
Model
2.5L16- 1.0*12
Frequency
Elements
(MHz)
Pitch
(mm)
Active
Aperture Elevation
(mm)
(mm)

Casing Dimensions
Long (L)
Width (W)
Height (H)
Case
Type
Model
mm
in
mm
in
mm
in
16
12
21
0.83
33.5
1.32
38.5
1.52
5L32- 1.0*10
16
16
10
21
0.83
33.5
1.32
38.5
1.52
5L64- 0.6*10
32
0.5
16
10
21
0.83
33.5
1.32
38.5
1.52
2.25L64- 0.75*10
16
16
10
21
0.83
33.5
1.32
38.5
1.52
2.5
16
4L16- 1.0*10
5L32- 0.5*10
5L16- 1.0*10
B 6/ B 9/ B 23/ B 40 Housing
Conventional: Large area scanning; planks, sticks, pipelines
B10
5L64- 0.8*10
Frequency
Elements
(MHz)
5
32
Pitch
(mm)
Active
Aperture Elevation
(mm)
(mm)
Casing Dimensions
Long (L)
Width (W)
Height (H)
mm
in
mm
in
mm
in
32
10
38
1.50
29
1.14
30
1.18
B40
B7
64
0.6
38.4
10
44
1.73
28
1.10
34
1.34
2.25
64
0.75
48
10
57
2.24
29
1.14
35
1.38
64
0.8
51.2
10
57
2.24
29
1.14
35
1.38
7.5
32
0.5
16
10
21
0.83
33.5
1.32
38.5
1.52
7.5L64- 0.8*10
7.5
64
0.8
51.2
10
57
2.24
29
1.14
35
1.38
10L16- 1.0*10
10
16
16
10
21
0.83
33.5
1.32
38.5
1.52
7.5L60- 1.0*10
7.5
60
60
10
68
2.68
26.8
1.06
40
1.57
3.5L128- 0.5*10
3.5L16- 1.6*16
2L16 - 1.8*20
Case
Type
7.5L32- 0.5*10
5L32- 0.6*15
Linear LARGE
Linear MEDIUM
Applications
B6
B23
32
0.6
19.2
15
24
0.94
33
1.30
25
0.98
3.5
128
0.5
64
10
70
2.76
29
1.14
35
1.38
B9
3.5
16
1.6
25.6
16
36
1.42
34
1.34
25
0.98
B5
5L64- 1.0*10
64
64
10
84
3.31
35.5
1.40
32
1.26
B26
16
1.8
28.8
20
35
1.38
28
1.10
29.9
1.18
B30
2L16 - 3.5*20
16
3.5
56
20
64
2.52
40
1.57
40
1.57
B25
06/07
Linear IMMERSION Series
Matrix 2D/1.5D
Features
Features
Applications
Applications
B13/15/16/19/21 Housing
Power: conventional welding inspection, pressure vessels, pipelines, rotor inspection
Aviation / Aerospace: Composites delamination & abhesion,
welding, landing gears inspection
Automotive: engine parts, frames, axles, brake discs
Conventional: Weldings, Forgings, Castings, Pipes, Bridges & construal steels
B60 Housing
Conventional: Large area scanning; planks, sticks, pipelines
Model
Frequency
Elements
(MHz)
Pitch
(mm)
Active
ApertureElevation
(mm)
(mm)

Casing Dimensions
Long (L)
Width (W)
Height (H)
Case
Type
Model
Frequency
Elements Pitch
(MHz)
X(mm)
Active Active
Pitch Aperture Aperture
Y(mm) X(mm) Y(mm)
Casing Dimensions
Long (L)
Width (W)
Height (H)
Case
Type
mm
in
mm
in
mm
in
mm
in
mm
in
mm
in
5L128- 0.8*12
128
0.8
102.4
12
106
4.17
17
0.16
32
1.26
B39
1.5M5*3 - 3.5*3
1.5
15
3.5
17.5
31.5
1.24
13
0.51
25
0.98
B21
5L128 - 0.8*1 0
128
0.8
102.4
10
1 20
4.7 2
16
0.6 3
30
1. 18
B60
5M8*8 - 1.0*1.0
64
35
1.38
19
0.75
45
1.77
B15
5M8*8 - 1.5*1.5
64
1.5
1.5
12
12
34
1.34
20
0.79
47
1.85
B19
5M16*16 - 1.0*10
256
16
16
40
1.57
27
1.06
55
2.17
B16
10M4*4 - 2.0*2.0
10
16
35
1.38
19
0.75
45
1.77
B15
10M8*8 - 0.6*0.6
10
64
0.6
0.6
4.8
4.8
25
0.98
12.5
0.49
47
1.85
B13
08/09
Matrix 2D/1.5D
Linear IMMERSION
B39 Housing
Concave
Wedge Integrated
Features
Features
A25/40 Housing
Wedge Integrated
Concave
R1/5/7/8 Housing
Applications
A35 Housing
Applications
Power: conventional welding inspection, pressure vessels, pipelines, rotor inspection
Aviation / Aerospace: Composites delamination & abhesion, welding, landing gears inspection
Aviation / Aerospace: Composites delamination & abhesion, welding, landing gears inspection
Model
Frequency
Elements
(MHz)
Pitch
(mm)
Active
Radius ApertureElevation
R(mm) (mm) (mm)

Casing Dimensions
Long (L)
mm
in
Width (W)
mm
in
Height (H)
mm
Case
Type
Model
in
Frequency
Elements
(MHz)
Pitch
(mm)
Active
Wedge Aperture Elevation
Angle() (mm)
(mm)
Casing Dimensions
Long (L)
Width (W)
Height (H)
Case
Type
3.5C128- 0.625*13- R32
3.5
128
0.625
R32
80
13
111
4.37
19
0.75
56
2.20
R8
mm
in
mm
in
mm
in
3.5C96 - 0.6*12- R22.9
3.5
96
0.6
R22.9
57.6
12
95.1
3.74
19
0.75
52
2.05
R7
4L16- 0.5*9- A35
16
0.5
35
27
1.06
16.5
0.65
22
0.87
A35
4C64 - 1.0*10 - R50
64
R50
64
10
124
4.88
18
0.71
60
2.36
R1
5L10- 0.5*5- A25
10
0.5
25
20
0.79
16
0.63
0.35
A25
10C64- 1.0*10 - R29
10
64
R29
64
10
106
4.17
18
0.71
47
1.85
R5
5L12- 0.5*6-A40
12
0.5
40
25
0.98
15
0.59
0.35
A40
10/11
Connectors
Wedge
Doppler provides the most compatible connectors to adopt all kind of Phased Array Probes in
the market.
Features
C1CONECTD
M1MOLEX
QLC260P
0, 45, 55and 60, and more refractable angles

SW or LW detection of steel angle from 30 to 70
Wedges fixed by stainless screws
Can Auto-scan with IHC wedges
Rotatable in fixed way
P1Omni Connector 30056
Wedge shapes and parameters can be customized
J1D38999
H1Hypertronic
Wedge Parameters Format

Wedge parameters with OmniScan
R1HIROSE
D2DL-260P(C)
Primary offset
Secondary offset (0 when probe is centered)
Height
Wedge
Connectors
D2DL-260P
Wedge parameters with TomoView
D1DL-156P
D3DL-96P(C)
D3DL-96P
Cable Types
Long service life cables
Low signal attenuation
Cable Type
Probe Elements
Good flexibility
Diameter of Cable
Great mechanical performance
Color
Compatible to most of industrial
Jacket Material
XT
Primary axis offset of the middle of the first element (mm)
Secondary axis offset of the middle of the first element
Height at the middle of the first element (mm)
50 Ohm coaxial cable with dual shield

16
4.0 mm
64
128
5.9 mm
6.8 mm
Wedge parameters with ISONIC
192
8.0 mm
W2
Black / Ivory
Probe offset
PVC / PU
H2
The length of wedge

The distance from center of the first
element to edge
The minimum height of wedge
environment
12/13
Wedge Specifications and Dimensions
Model
AXI AL OUTSIDE DIAMETER
AXI AL INSIDE DIAMETER
AOD
AID
CIRCUMFERENTIAL INSIDE DIAMETER
COD
CID
SPHERICAL OUTSIDE DIAMETER
SPHERICAL INSIDE DIAMETER
SOD
SID
Refraction
Scan Angle
Angle in Steel
Dimension (mm)
L
Angle
SB5- N0L
B5
0 LW
N/A
37.60
20.00
36.60
SB5- N45L
B5
45 LW
30to60
55.50
49.00
36.60
16.5
SB6- N0L
B6
0 LW
N/A
70.00
20.00
35.00
SB6- N45S
B6
45 SW
30to60
79.50
37.28
38.00
30
SB6- N55S
B6
55 SW
30to70
79.50
40.57
38.00
36
SB6- N60S
B6
60 SW
45to70
79.50
42.20
38.00
38
SB6- N45L
B6
45 LW
30to6 0
79.50
22.30
38.00
16.5
SB6- N60L
B6
60 LW
45to70
79.50
25.80
38.00
20
SB7- N0L
B7
0 LW
N/A
54.00
20.00
32.00
SB7- N55S
B7
55 SW
30to70
68.50
43.00
30.00
36
SB7- N55S- IHC
B7
55 SW
30to70
68.50
43.00
40.00
36
SB8- N0L
B8
0 LW
N/A
24.00
20.00
33.00
SB8- N45S
B8
45 SW
30to60
31.90
17.80
28.00
30
SB8- N60S
B8
60 SW
45to70
31.90
20.70
28.00
38
SB8- N45L
B8
45 LW
30to60
31.90
12.40
28.00
16.5
SB8- N60L
B8
60 LW
45to70
31.90
13.85
28.00
20
SB9- N0L
B9
0 LW
N/A
80.00
20.00
32.00
SB9- N55S
B9
55 SW
30to70
124.50
60.00
35.50
36
SB10- N0L
B10
0 LW
N/A
33.50
20.00
31.00
SB10- N45S
B10
45 SW
30to60
32.60
16.85
33.50
30
SB10- N45S- IH
B10
45 SW
30to60
45.00
23.46
40.00
30
SB10- N55S
B10
55 SW
30to70
32.60
18.50
33.50
36
SB10- N60S
B10
60 SW
45to70
32.60
18.93
33.50
38
SB10- N45L
B10
45 LW
30to60
32.60
12.31
33.50
16.5
SB10- N60L
B10
60 LW
45to70
32.60
13.53
33.50
20
SB12- N0L
B12
0 LW
N/A
28.00
20.00
25.00
SB12- N55S
B12
55 SW
30to70
25.50
15.00
28.00
36
SB15- N0L
B15
0 LW
N/A
40.00
20.00
21.00
SB15- N50L
B15
50 LW
30to70
35.00
13.52
40.00
17.5
SB15- N55S
B15
55 SW
30to70
35.00
18.70
40.00
36
SB15- N70S
B15
70 SW
50to80
40.00
21.05
40.00
43
SB16- N0L
B16
0 LW
N/A
45.00
20.00
30.00
SB16- N55S
B16
55 SW
30to70
45.00
23.63
40.00
36
SB19- N0L
B19
0 LW
N/A
40.00
20.00
38.00
SB19- N55S
B19
55 SW
30to70
54.50
31.17
40.00
36
SB22- N0L
B22
0 LW
N/A
35.00
20.00
31.00
SB23- N50S
B23
50 SW
30to70
82.00
44.00
38.00
33.7
SB25- N55S
B25
55 SW
30to70
88.00
43.62
44.00
36
SB30- N55S
B30
55 SW
30to70
53.00
27.75
44.00
36
Wedge Specifications
Wedge Specifications
CIRCUMFERENTIAL OUTSIDE DIAMETER
Case
14/15
Wedge Specifications and Dimensions
Wedge
Model
Refracted
Number of
Angle in Steel Channels
Probe Test Report
H1
H2
W2
W1
Probe
Offset
XT
Wedge
Velocity
SB6- N45S
30
64
37.28
5.30
79.50
24.10
2.90
38.00
77.00
2.50
6.75
2350m/s
SB6- N55S
36
64
40.57
5.30
79.50
30.10
2.90
38.00
77.10
2.35
7.00
2350m/s
Probe Test Report
Probe Test Report
Probe Test Report
16/17
Probe Test Report
Probe Test Report
Probe Test Report
Probe Test Report
18/19

Phased Array Probes - Doppler

Uploaded by

Copyright:

Available Formats

Phased Array Probes - Doppler

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Phased Array Probes - Doppler

Uploaded by

Copyright:

Available Formats

CREATE A RENOWNED

Phased Array Probes Catalogue

WORLD BRAND OF ULTRASOUND

International Cutting Edge Technology

Guangzhou Doppler Electronic Technologies Co.,Ltd.

Guangzhou Doppler Electronic Technologies Co.,Ltd.

Internal Focused (S)

1.5D Array (M)

Annular Sectorial (S)

Variable angle (L)

Phased Array Probes Catalogue

Phased Array Probe

Linear SMALL Series

Linear MEDIUM Series

gInternal element spacing

nNumber of elements in the PA probe

Wedge Specifications And Dimensions

Precise active aperture: A = (n - 1) p + W

Near field: N =D /(4)

Phased Array Probe

Linear SMALL Series

Probe Model Illustration

Cable top or side leads

Electronic controls beam angle, focusing, and scanning step size

L(linear) V(convex) C(concave)

Replaceable two types of wedges - flatted & curved surfaces

AWedge integrated A45: Integration 45wedgeA0:Integration 0wedge

RRadius of concave or convex probeR29Radius 29

Power: conventional welding inspection, pressure vessels, oil refineries, etc.

Cable Capacitance According probe serial

Aviation / Aerospace: Welding, landing gears inspection

P1Omni Connector 160PIN

Automotive: engine parts, frames, axles, brake discs.

Wedge Model Illustration

Mounting Refraction Wave Irrigation Scanner yoke

Probe Specifications and Dimensions

SCasing type matched to the wedge

Mounting Method N = Normal

S=Share WaveL=Longitudal Wave

I=Irrigation H=Scaner yoke attachment points C=Adjustable carbide wear pins

AOD=Axial outside diameter (circumferential scan)

COD=Circumferential outside diameter (axial scan)

Linear MEDIUM Series

Linear LARGE Series

Cable side leads

Electronic controls beam angle, focusing, and scanning step size

Electronic controls beam angle, focusing, and scanning step size

Less settings and scanning time

Electronic focusing Increased sensitivities & Signal-to-noise ratios

Can detect conventional undetectable areas

Reduction or Exemption of mechanical or manual controls

Power: conventional welding inspection, pressure vessels, oil refineries, etc.

Power: pressure vessels, Pipelines.

Aviation / Aerospace: Welding, landing gears inspection

Petroleum: Pipelines, tanks

Automotive: engine parts, frames, axles, brake discs

Aviation / Aerospace: Composites delamination & abhesion,

Conventional: Weldings, Forgings, Castings, Pipes,

welding, landing gears inspection

Bridges & construal steels