Preparation of a Formatted Conference Paper for an

IEEE Power & Energy Society Conference

Line 1: Authors Name/s per 1st Affiliation
Line 2: Authors Name/s per 1st Affiliation

Line 1: Authors Name/s per 2nd Affiliation

Line 2: Authors Name/s per 1st Affiliation

Line 3 (of Affiliation): Dept. name of organization

Line 4: name of organization, acronyms acceptable
Line 5: City, Country
Line 6: e-mail address if desired

Line 3 (of Affiliation): Dept. name of organization

Line 4: name of organization, acronyms acceptable
Line 5: City, Country
Line 6: e-mail address if desired

AbstractBasic guidelines for the preparation of a technical

paper for an IEEE Power & Energy Society Conference are
presented. This electronic document is a live template. The
various components of your paper [title, text, headings, etc.] are
already defined, as illustrated by the portions given in this
document. The abstract is limited to 150 words and cannot
contain equations, figures, tables, or references. It should
concisely state what was done, how it was done, principal
results, and their significance.
Index Terms--The author shall provide up to 5 keywords (in
alphabetical order) to help identify the major topics of the
paper. The thesaurus of IEEE indexing keywords is posted at
http://www.ieee.org/organizations/pubs/ani_prod/keywrd98.txt.

I.

INTRODUCTION (HEADING 1)

This template provides authors with most of the formatting

specifications needed for preparing electronic versions of PES
Conference papers. All standard paper components have been
specified for three reasons: (1) ease of use when formatting
individual papers, (2) automatic compliance to electronic
requirements that facilitate the concurrent or later production
of electronic products, and (3) conformity of style throughout
a conferences proceedings. Margins, column widths, line
spacing, and type styles are built-in; examples of the type
styles are provided throughout this document and are
identified in italic type, within parentheses, following the
example. Some components, such as multi-leveled equations,
graphics, and tables are not prescribed, although the various
table text styles are provided. The formatter will need to create
these components, incorporating the applicable criteria that
follow.
II.

EASE OF USE

A.

Template (Heading 2)
This template has been tailored for output on US lettersized paper.

Identify applicable sponsor/s here. (sponsors)

B. Maintaining the Integrity of the Specifications

The template is used to format your paper and style the
text. All margins, column widths, line spaces, and text fonts
are prescribed; please do not alter them. You may note
peculiarities. For example, the heading margin in this template
measures proportionately more than is customary. This
measurement and others are deliberate, using specifications
that anticipate your paper as one part of the entire proceedings,
and not as an independent document. Please do not revise any
of the current designations.
III.

CONFERENCE PAPER PREPARATION

Conference papers are limited to a maximum of five pages.

Please use automatic hyphenation and check your spelling.
Additionally, be sure your sentences are complete and that
there is continuity within your paragraphs. Check the
numbering of your graphics (figures and tables) and make sure
that all appropriate references are included.
Please take note of the following items when proofreading
spelling and grammar:
A. Abbreviations and Acronyms
Define abbreviations and acronyms the first time they are
used in the text, even after they have been defined in the
abstract. Abbreviations such as IEEE, SI, ac, dc, and rms do
not have to be defined. Do not use abbreviations in the title or
section headings unless they are unavoidable.
B. Units
Metric units are preferred for use in IEEE publications
in light of their global readership and the inherent
convenience of these units in many fields. In
particular, the use of the International System of Units
(Systeme Internationale d'Unites or SI Units) is
advocated. This system includes a subsystem of units
based on the meter, kilogram, second, and ampere
(MKSA). U.S. Customary units, or British units, may
be used as secondary units (in parentheses). An

exception is when U.S. Customary units are used as

identifiers in trade, such as 3.5-inch disk drive.

Avoid combining SI and U.S. Customary units, such

as current in amperes and magnetic field in oersteds.
This often leads to confusion because equations do not
balance dimensionally. If you must use mixed units,
clearly state the units for each quantity that you use in
an equation.

Do not mix complete spellings and abbreviations of

units: Wb/m2 or webers per square meter, not
webers/m2. Spell out units when they appear in
text: . . . a few henries, not . . . a few H.

In American English, commas, semi-/colons, periods,

question and exclamation marks are located within
quotation marks only when a complete thought or
name is cited, such as a title or full quotation. When
quotation marks are used, instead of a bold or italic
typeface, to highlight a word or phrase, punctuation
should appear outside of the quotation marks. A
parenthetical phrase or statement at the end of a
sentence is punctuated outside of the closing
parenthesis (like this). (A parenthetical sentence is
punctuated within the parentheses.)

A graph within a graph is an inset, not an insert.

The word alternatively is preferred to the word
alternately (unless you really mean something that
alternates).

Do not use the word essentially to mean

approximately or effectively.

In your paper title, if the words that uses can

accurately replace the word using, capitalize the
u; if not, keep using lower-cased.

Be aware of the different meanings of the

homophones affect and effect, complement and
compliment, discreet and discrete, principal
and principle.

Do not confuse imply and infer.

The prefix non is not a word; it should be joined to

the word it modifies, usually without a hyphen.

There is no period after the et in the Latin

abbreviation et al..

The abbreviation i.e. means that is, and the

abbreviation e.g. means for example.

Use a zero before decimal points: 0.25, not .25.

Use cm3, not cc. (bullet list)

C. Equations
The equations are an exception to the prescribed
specifications of this template. You will need to determine
whether or not your equation should be typed using either the
Times New Roman or the Symbol font (please no other font).
To create multileveled equations, it may be necessary to treat
the equation as a graphic and insert it into the text after your
paper is styled. Use of the Microsoft Equation Editor or the
MathType commercial add-on for MS Word for math objects
in your paper is permissible (Insert | Equation or MathType
Equation). "Float over text" should not be selected.
Number equations consecutively. Equation numbers,
within parentheses, are to position flush right, as in (1), using
a right tab stop. To make your equations more compact, you
may use the solidus ( / ), the exp function, or appropriate
exponents. Italicize Roman symbols for quantities and
variables, but not Greek symbols. Use a long dash, as shown
in (1), rather than a hyphen for a minus sign. Punctuate
equations with commas or periods when they are part of a
sentence, as in

IV.

USING THE TEMPLATE

This document should be used as a template for preparing

your Conference paper. You may type over sections of the
document, cut and paste into it, and/or use markup styles.

Note that the equation above is centered using a center tab

stop. Be sure that the symbols in your equation have been
defined before or immediately following the equation. Use
(1), not Eq. (1) or equation (1), except at the beginning
of a sentence: Equation (1) is . . .

Duplicate the template file by using the Save As

command, and use the naming convention prescribed by your
conference for the name of your paper.

D. Footnotes
Number footnotes separately in superscripts. Place the
actual footnote at the bottom of the column in which it was
cited. Do not put footnotes in the reference list. Use letters for
table footnotes.
E. Some Common Mistakes
The word data is plural, not singular.

The subscript for the permeability of vacuum 0, and

other common scientific constants, is zero with
subscript formatting, not a lowercase letter o.

A. Authors and Affiliations

The template is designed so that author affiliations are not
repeated each time for multiple authors of the same affiliation.
Please keep your affiliations as succinct as possible (for
example, do not differentiate among departments of the same
organization). This template was designed for two affiliations.
1) For author/s of only one affiliation (Heading 3): To
change the default, adjust the template as follows.
a) Selection (Heading 4): Highlight all author and
affiliation lines.
b) Change number of columns: Select the Columns icon
from the MS Word Standard toolbar and then select 1
Column from the selection palette.

c) Deletion: Delete the author and affiliation lines for

the second affiliation.
2) For author/s of more than two affiliations: To change
the default, adjust the template as follows.
a) Selection: Highlight all author and affiliation lines.
b) Change number of columns: Select the Columns
icon from the MS Word Standard toolbar and then select the
number of columns desired from the selection palette.
c) Highlight author and affiliation lines of affiliation 1
and copy this selection.
d) Formatting: Insert one hard return immediately after
the last character of the last affiliation line. Then paste down
the copy of affiliation 1. Repeat as necessary for each
additional affiliation.
e) Reassign number of columns: Place your cursor to
the right of the last character of the last affiliation line of an
even numbered affiliation (e.g., if there are five affiliations,
place your cursor at end of fourth affiliation). Drag the cursor
up to highlight all of the above author and affiliation lines. Go
to Column icon and select 2 Columns. If you have an odd
number of affiliations, the final affiliation will be centered on
the page; all previous will be in two columns.
B. Identify the Headings
Headings are organizational devices that guide the reader
through your paper. There are two types: component headings
and text headings.
Component headings identify the different components of
your paper and are not topically subordinate to each other.
Examples include ACKNOWLEDGMENTS and REFERENCES and,
for these, the correct style to use is Heading 5. Use figure
caption for your Figure captions, and table heading for
your table title. Run-in headings, such as Abstract, will
require you to apply a style (in this case, italic) in addition to
the style provided by the drop down menu to differentiate the
heading from the text.
Text headings organize the topics on a relational,
hierarchical basis. For example, the paper title is the primary
text heading because all subsequent material relates and
elaborates on this one topic. If there are two or more subtopics, the next level heading (uppercase Roman numerals)
should be used and, conversely, if there are not at least two
sub-topics, then no subheadings should be introduced. Styles
named Heading 1, Heading 2, Heading 3, and Heading
4 are prescribed.
C. Figures and Tables
1) Positioning Figures and Tables: Large figures and
tables may span across both columns. Figure captions should
be below the figures; table headings should appear above the
tables. Insert figures and tables after they are cited in the text
as close to the citation as possible. Use the abbreviation Fig.
1, even at the beginning of a sentence.

TABLE I.

Table
Heading
copy

TABLE TYPE STYLES

Table Column Heading

Table column
subheading

Subheading

Subheading

More table copy

a. Example of a Table footnote. (Table footnote)

Figure Labels: Use 8 point Times New Roman for Figure

labels. Use words rather than symbols or abbreviations when
writing Figure axis labels to avoid confusing the reader. As an
example, write the quantity Magnetization, or
Magnetization, M, not just M. If including units in the
label, present them within parentheses. Do not label axes only
with units. In the example, write Magnetization (A/m) or
Magnetization {A[m(1)]}, not just A/m. Do not label axes
with a ratio of quantities and units. For example, write
Temperature (K), not Temperature/K.
Figures and tables should be numbered consecutively. Use
Arabic numerals for figures and Roman numerals for tables.
We suggest that you use a text box to insert a graphic
(which is ideally a 300 dpi TIFF or EPS file, with all fonts
embedded) because, in an MSW document, this method is
somewhat more stable than directly inserting a picture.
To have non-visible rules on your frame, use the
MSWord Format pull-down menu, select Text Box >
Colors and Lines to choose No Fill and No Line.
Figure 1. Example of a figure caption. (figure caption)

ACKNOWLEDGMENT (HEADING 5)
The preferred spelling of the word acknowledgment in
America is without an e after the g. Avoid the stilted
expression, One of us (R. B. G.) thanks . . . Instead, try R.
B. G. thanks. Put sponsor acknowledgments in the
unnumbered footnote on the first page.
The following is an example of an acknowledgment.
The authors gratefully acknowledge the contributions of T.
Edison, G. Westinghouse, N. Tesla, A. Volta and A. Ampere
to the electric power industry.
REFERENCES
References are important to the reader; therefore, each
citation must be complete and correct. There is no editorial
check on references; therefore, an incomplete or wrong
reference will be published unless caught by a reviewer and
will detract from the authority and value of the paper.
References should be readily available publications.
List only one reference per reference number. If a
reference is available from two sources, each should be listed
as a separate reference.
The template will number citations consecutively within
brackets [1]. The sentence punctuation follows the bracket [2].

Multiple references [3], [4] are each numbered with separate

brackets [4]-[6]. Refer simply to the reference number, as in
[7]do not use Ref. [7] or reference [7] except at the
beginning of a sentence: Reference [7] was the first . . .
Unless there are six authors or more give all authors'
names; do not use et al.. Papers that have not been
published, even if they have been submitted for publication,
should be cited as unpublished [8]-[10]. Capitalize only the
first word in a paper title, except for proper nouns and element
symbols. For papers published in translation journals, please
give the English citation first, followed by the original
foreign-language citation [11]. Papers that have been accepted
for publication, but not yet published, should be cited as in
press [12].
Samples of the correct formats for various types of
references are given below [1]-[16].
Periodicals:
[1]

[2]

J. F. Fuller, E. F. Fuchs, and K. J. Roesler, "Influence of harmonics on

power distribution system protection," IEEE Trans. Power Delivery,
vol. 3, pp. 549-557, Apr. 1988.
R. J. Vidmar. (1992, Aug.). On the use of atmospheric plasmas as
electromagnetic reflectors. IEEE Trans. Plasma Sci. [Online]. 21(3),
pp. 876-880. Available: http://www.halcyon.com/pub/journals/21ps03vidmar

Books:
[3]
[4]

[5]

E. Clarke, Circuit Analysis of AC Power Systems, vol. I. New York:

Wiley, 1950, p. 81.
G. O. Young, "Synthetic structure of industrial plastics," in Plastics,
2nd ed., vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 1564.
J. Jones. (1991, May 10). Networks. (2nd ed.) [Online]. Available:
http://www.atm.com

Technical Reports:
[6]

[7]

E. E. Reber, R. L. Mitchell, and C. J. Carter, "Oxygen absorption in the

Earth's atmosphere," Aerospace Corp., Los Angeles, CA, Tech. Rep.
TR-0200 (4230-46)-3, Nov. 1968.
S. L. Talleen. (1996, Apr.). The Intranet Architecture: Managing
information in the new paradigm. Amdahl Corp., Sunnyvale, CA.

[Online]. Available: http://www.amdahl.com/doc/products/bsg/intra/

infra/html

Unpublished Papers:
[8]

D. Ebehard and E. Voges, "Digital single sideband detection for

interferometric sensors," unpublished, presented at the 2nd Int. Conf.
Optical Fiber Sensors, Stuttgart, Germany, 1984.
[9] Process Corp., Framingham, MA. Intranets: Internet technologies
deployed behind the firewall for corporate productivity, unpublished.
Presented at INET96 Annu. Meeting. [Online]. Available:
http://home.process.com/ Intranets/wp2.htp
[10] G. N. Lester and J. H. Nelson, History of Circuit Breaker Standards,
unpublished. Presented at the IEEE/PES General Meeting, 24 July
2008. [Online]. Available IEEE/PES Switchgear Committee web site:
http://www.ewh.ieee.org/soc/pes/switchgear/Presentations/2008CBtuto
rial/speaker1paper.pdf

Papers Published in Translation Journals:

[11] Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, Electron spectroscopy
studies on magneto-optical media and plastic substrate interface, IEEE
Transl. J. Magn. Japan, vol. 2, pp. 740741, August 1987 [Digests 9th
Annual Conf. Magnetics Japan, p. 301, 1982].

Papers Accepted for Publication (but not yet published):

[12] E. H. Miller, "A note on reflector arrays," IEEE Trans. Antennas
Propagat., in press.

Papers from Conference Proceedings (Published):

[13] J. L. Alqueres and J. C. Praca, "The Brazilian power system and the
challenge of the Amazon transmission," in Proc. 1991 IEEE Power
Engineering Society Transmission and Distribution Conf., pp. 315-320.

Dissertations:
[14] S. Hwang, "Frequency domain system identification of helicopter rotor
dynamics incorporating models with time periodic coefficients," Ph.D.
dissertation, Dept. Aerosp. Eng., Univ. Maryland, College Park, 1997.

Standards:
[15] IEEE Guide for Application of Shunt Power Capacitors, IEEE Std.
1036-2010, Sep. 2010.

Patents:
[16] G. Brandli and M. Dick, "Alternating current fed power supply," U.S.
Patent 4 084 217, Nov. 4, 1978.