Araldite GY 257
Modified liquid Epoxy Resin
JANA
General
Araldite GY 257 is a low viscose epoxy resin based on Bisphenol A modified with an
aromatic glycidyl ether.
Applications
Araldite GY 257 can be cured with polyamines, polyamidoamines or their adducts for
solvent-free coatings, self-leveling and mortor floors, concrete injections, structure
adhesives, trowelling compounds and impregnation systems. In combination with
unmodified epoxy resins, like Araldite GY 250 and Araldite GY 6010 the viscosity of the
end formulation can be reduced.
Properties
Due to the low viscosity and the full crystallization resistance Araldite GY 257 is a most
suitable epoxy resin in formulating solvent free systems yielding,
Very good processing properties
Good mechanical performances
Good surface penetration
Medium chemical resistance / good acid and solvent resistance
Specific key data
Property
Value
Test method
Appearance
Color, Gardner
Epoxy value
Weight per epoxide
Viscosity at 25 C (77 F)
Clear, no contamination
3 max
5.20 5.50 eq/Kg
180 192 g/eq
500 700 mPa.s
JCTM 001
ASTM D-1544
ASTM D-1652
ASTM D-1652
ISO 12058-1
Specific key data are individually checked thought, guaranteed, and included in the certificates of analysis.
Typical Key Data
Density at 25C
Flash point
1.15 g/cm
138 C
3
P
ISO 1675
ISO 2719
Typical key data are spot-checked; the values are typical for the product and are indicated for information only.
The values are not included in certificate of analysis.
As-supplied form
Liquid
Odor
Yes
Shelf life (at storage temperature between 2 - 40C) Several years
(See expiry date on original container)
Araldite GY 257 - FG101009.docx
Hazardous decomposition products
Carbon monoxide, carbon dioxide,
nitrogen oxides and other toxic
gases and vapors
Disposal
Regular procedures approved by
local authorities
March 2011
Page 1 of 2
Packaging & Storage
Araldite GY 257 is supplied in bulk and in 220 kg. steel drums. This product should be
stored in a dry place, preferably in the sealed original container; at temperatures between
2C and 40C (temperatures will never be allowed to drop under 0C). The product
should not be stored exposed to direct sunlight.
Tariff Number
39073000
Handling/Safety
Precautions
Mandatory and recommended industrial hygiene procedures should be followed
whenever our products are being handled and processed. For additional information
please consult the corresponding product safety data sheets.
Note
Araldite is a registered trademark of Huntsman LLC or an affiliate thereof.
Jubail Chemical Industries Co. (JANA)
P.O Box 10661
Jubail Industrial City 31961
Kingdom of Saudi Arabia
Tel
: +966 13 3478888
Fax
: +966 13 3476705
Website : www.jana-ksa.net
DISCLAIMER:
THE INFORMATION AND RECOMMENDATIONS CONTAINED HEREIN ARE BASED UPON OUR DATA BELIEVED TO BE
CORRECT. HOWEVER, SINCE THE CONDITION OF USE ARE BEYOND OUR CONTROL, NO GUARANTEE OR
WARRANTY OF ANY KIND OF EXPRESSED OR IMPLIED IS MADE WITH RESPECT TO THE INFORMATION CONTAINED
HEREIN.
Araldite GY 257 - FG101009.docx
March 2011
Page 2 of 2
