Sika - Bitumen: Bitumen Emulsion Waterproof & Protective Coating
Sika - Bitumen: Bitumen Emulsion Waterproof & Protective Coating
Sika - Bitumen: Bitumen Emulsion Waterproof & Protective Coating
Edition: 01/05/2012
Identification no.
Version no: UAE
Sika -Bitumen
Sika-Bitumen
Bitumen Emulsion Waterproof & Protective Coating
Product Description
Uses
Advantages
Product Data
Form
Liquid
Appearance/ Colours
Packaging
Storage
Storage Conditions
Store in original sealed containers under shade in a cool and dry environment at
temperatures between 5C and 35C.
Shelf Life
Technical Data
Chemical Base
Bitumen Emulsion
Density (at 23 C)
~ 1.00 kg/lt
Flash Point
Non-Flammable
Sika Bitumen
1/3
Solid Content
Approximately 26 % by weight
Curing Time
Consumption
On Concrete:
2
Approximately 0.20 -0.35 kg/m applied in 2 coats.
On Steel:
2
Approximately 0.10 -0.20 kg/m applied in 2 coats.
approximately 2 hours
approximately 8 hours
approximately 72 hours
Application Details
Substrate preparation
All surfaces must be sound, even, free from dust, loose particles and any
contamination.
Hot and very dry, porous concrete surfaces must be primed by diluting Sika
Bitumen with clean water at 1:1 ratio (by weight).
Application
Apply Sika Bitumen evenly and in one direction using a stiff brush.
A two-coat application is recommended to avoid possible gaps in the film.
Each coat must be allowed to dry before applying the next one.
In wet areas, where a key to subsequent layers (e.g. screed, tile bedding, etc.) is
required, blind the fresh top layer with clean sharp sand.
Do not apply Sika Bitumen to outside areas in wet weather or when rain is
expected.
Cleaning
Clean all equipment and tools with water immediately after use.
Sika Bitumen
2/3
Value Base
All technical data stated in this Product Data Sheet are based on laboratory tests.
Actual measured data may vary due to circumstances beyond our control
Local Restrictions
Please note that as a result of specific local regulations the performance of this
product may vary from country to country. Please consult the local Product Data
Sheet for the exact description of the product uses.
For information and advice on the safe handling, storage and disposal of chemical
products, users shall refer to the most recent Material Safety Data Sheet containing
physical, ecological, toxicological and other safety-related data
Legal Notes
All products are manufactured under a management system certified to conform to the requirements of the quality,
environmental and occupational health & safety standards ISO 9001, ISO 14001 and OHSAS 18001.
3/3