Mech Mand Dis 2015

1)Name: Dr. Ravindra B.
Ingle
2)Designation:: Professor and Head of Department.
3) Qualification: Ph.D. ( Mech), M. Tech( Design), B.E.( Mech)
4)Experience:: Total = 30 Years
( Industry 03 Years, Teaching- 27 Years, Research 10 Years inclusive)
5)Area of Interest: Vibration and Noise , Composites and Tribology
6)Workshop Attended: 30 Nos ( QIP / TEQIP / STTP / AICTE / UOPune)
At : IIT Delhi, IIM Banglore, COEPune, ARAI Pune, VIT Pune, SJCOE Mysore,
CCOEW Pune
7)Paper Presented / Published:
43 Nos.
International Journals
10
National Journals
05
ASME World Congress
01
World Maritime Congress
01
International Conferences
12
National Conferences
14
8)Departmental Administrative Responsibilities:
Overall Responsible for all committees

Academic Monitoring
Industrial Visits
Guest Lectures from Industry Eminent
LIC / PAC / NBA
Autonomy Structure-Syllabus Design / BOS
9)Contribution in the University Activities:
Chairman, Paper setter and Moderator

Member of Selection Committee
Member of Local Inquiry Committee
Principal Investigator of BCUD project
Ph.D. Guide in Mechanical Engg. ( Design)
PG recognized Teacher of UO Pune
10)Membership of Scientific and Professional Society:

Association of Machines and Mechanism
Indian Society of Technical Education
11)Samstha Level administrative Responsibilities:
12)Subject teaching at Under Graduate Level:

Dynamics of Machinery,
Theory of Machines I & II
Mechanical System Design
13)Subject teaching at Post graduate level:
Mechanical Vibrations
Kinematics Analysis and Synthesis of Mechanism
14)Projects Carried out :
100 + projects carried out in the area of Design Engg. at UG and PG level
01 at Ph.D. level in Vibration and Tribology
01 R & D project , AICTE, New Delhi
01) Name: Dr. Anand K. Bewoor

02) Designation:- Professor of Mechanical Engineering Department
03) Qualification: B.E.(Mech.), M.E. (Mech.), Ph.D.(Mech.)
04) Experience: Teaching- 11.5 Years, Industry 3.5 Years
05) Area of Interest: Manufacturing Engg., Industrial Engg. And Quality Management,
06) Workshop Attended
1.
22nd Oct -3rd

Nov. 2007
ISTE sponsored Two week SDP on Reliability and Failure

analysis of Engg System at Prod. Engg. Dept., Sinhgad C.O.E.,
Pune.
2.
3rd 13th
ISTE sponsored Two week SDP on Metrology and Quality

Control, SVCP, Pune.
Jan.2007
3.
19-31
Dec.-2005
4.
7th to 19th
Nov. 2005
5.
15th 27th
May 2006
6.
20-31
Dec.-2004
7.
13th 17th
Nov. 2006
8.
12th -17th
June 2006
AICTE sponsored Two week SDP on Nano TechnologyOpportunities & Challenges, BATU, Lonere.
AICTE sponsored Two Week SDP on Recent Trends in
Refrigeration & Air Conditioning, S.C.O.E., Pune.
AICTE sponsored Two Week Summer SDP
Mathematica, Mathematics Dept, S.C.O.E., Pune.
on
EN-
Two Week SDP on Developing Technology Competencies,

NITTTR Extn. Centre, Pune.
One week SDP on Finite element analysis using ABACUS, at
S.C.O.E., Pune.
Attended One week Short Term Programme on Recent trends in
Manufacturing, Automation and Reliability Engineering at
C.O.E.P., Pune.
Workshops / Seminars / Conference Attended

Sr.
No.
1.
Date
Title of Workshops / Seminars / Conference & Conducted at
27th July 2013 One day workshop on Implementation of revised syllabus of MEMechanical (All Branch) by Mech. Engg. Dept., FIT, Pune.
2.
9th July 2013
One day workshop on Implementation of revised syllabus of

Manufacturing Process Subject for SE Mech. Online & Offline
exam., organized by A.I.S.S.M.S. & UoP, Pune
3.
27th August
2013
One day workshop on syllabus setting for SE, TE & BE organized

by B.O.S. Mech. Engg. at Mech. Engg. Dept., MKSSSs, Pune.
4.
11th August
2013
One day workshop on Industry Institute Interaction organized by

C.O.E.P. & Srijan, Pune.
5.
21st Jan 2010 One day workshop on syllabus setting of MQC Subject for TE
organized by A.I.S.S.M.S. & UoP, Pune
6.
11th July 2009 One day workshop on Implementation of revised syllabus of

MDCG (2008 Course) by Mech. Engg. Dept., VIIT, Pune.
7.
27th 28th
April 2009
Two days training programme on 3D Coordinate Measuring

Machine organized by Prod. Engg. Dept., SCOE, Pune.
8.
3rd 5th
Aug. 2009
Three days workshop on Role of Engineers in rural development

organized by NSS, MAH Govt., UoP & VIIT, Pune
9.
28th - 29th
Feb. 2008
Two Days Workshop on Research Methodologies, M.A.E.,

Alandi, Pune.
10.
28th 29th
Jan. 2008
CEEP on MATLAB, V.I.I.T., Pune.
11.
18th 19th
Jan 2008
Two days workshop on Research in Engineering, organized by

Dept. of Mathematics, MMCOE, Pune.
12.
20th June 2006 One day seminar on The new age concept in engineering design
productivity, at C-ACT, Pune.
07) Paper Presented/ Published:

Journal Papers
1. An Empirical Study Of Factors Affecting Productivity of Solapur Based Terry Towel
Manufacturing Textile Industries, International Journal of Industrial Engineering
Research And Development (IJIERD), Volume 5, Issue 1, January - February (2014), pp.
31-38. [Impact Factor (2013): 5.1283].
2.
Review of parameters affecting productivity of Textile SMEs, International J. of

Multidispl. Research & Advcs. in Engg.(IJMRAE), ISSN 0975-7074, Vol. 5, No. III
(July 2013), pp. 57-68. [Impact Factor (2013): 0.38].
3.
Critical review of research in use of laser beam welding in automotive sector,

International Journal of Engineering Research and Industrial Applications (IJERIA),
Vol.
6,
No.
II,
[Impact Factor (2013): 0.481].
May
2013.
ISSN
0974-1518.
An empirical study of the motives and benefits of QMS/ISO implementation among Indian
SMEs, International Journal of Productivity and Quality Management, Vol. 6, Issue 4,
2010, pp. 379-406. ISSN: 1746-6474. [H Index: 07]
4.
An empirical analysis of impact of QMS/ISO implementation on

productivity/performance of Indian SMEs, International Journal of Industrial
Engineering and Technology, Vol. 2, No. 1, 2010, pp. 85-109. ISSN: 0974 3146.
5. Mapping Macro/Micro Level Critical Links for Integrating Six Sigma DMAIC steps as a
Part of Companys Existing QMS Processes: An Indian SME Case Study, International
Journal of Six Sigma and Competitive Advantage, Vol. 6, Nos. 1/2, 2010, pp. 105-131.
ISSN: 1479-2494. [H Index: 11]
6. Use of Shining Tools for Simplifying Six Sigma implementation in QMS/ISO Certified
Environment an Indian SME Case Study, Journal of Engineering Research and Study,
Vol. I, Issue No. II Oct.- Dec.,2010, pp.177-194. E-ISSN: 0976-7916.
7. Developing and Implementing Quality Six Sigma(QSS) - an Integrated QMS and Six
Sigma Methodology for Improving Quality and Productivity/ Performance of SME An
Indian Case Study, International Journal of Emerging Technologies and Applications in
Engineering, Technology & Sciences, Vol. 2, Issue 2, 2009,pp. 222-228. ISSN : 09743588.
8. Evaluating the Relationship Between Installation and Use Of ISO 9000 on Operating and
Business Performance of Indian SMEs, International J. of Multidisciplinary Research &
Advcs. in Engg.(IJMRAE), Vol. 4, No. I, Jan. 2012, pp. 461-478. ISSN : 0975-7074.
9. Experimental investigation of optimization of process parameters for machining nonconducting material by ECDM process in Manufacturing Technology Today Journal,
Jan. 2006 Issue.
10. Design optimization for reliability importance of components in hydraulic trainer system
in Manufacturing Technology Today Journal, Jan. 2005 Issue.
Papers presented in International Conferences
1.
Role of Lean Six Sigma in Quality Management Practices: A Case Study,

International Conference on Industrial Engineering (ICIE-2013), Dept. of Mech.
Engg. S.V.N.I.T., Surat, India. 20th -21st Nov. 2013.
2. A Multi Criteria Decision Making Model for Supplier Selection and Evaluation:
Case of Kraljic Model, International Conference on Industrial Engineering
(ICIE-2013), Dept. of Mech. Engg. S.V.N.I.T., Surat, India. 20th -21st Nov. 2013.
3.
Study of Variables of Textile Manufacturing Industries and their effects on

Productivity of Solapur based SMEs International Conference on Industrial
Engineering (ICIE-2013), Dept. of Mech. Engg. S.V.N.I.T., Surat, India. 20th 21st Nov. 2013.
4.
Postural Analysis and Quantification of Fatigue by using RULA and REBA

techniques, International Conference on Mechanical And Production
Engineering (ICMPE-2013), Institute of Technology and Research, Pune, 15th Feb
2013.
5.
An Expert Advisory System for ISO 9001 based QMS of Manufacturing

Environment IEEE International Conference on Communication, Information &
Computing Technology (ICCICT-2012) Sardar Patel Institute of Technology,
Mumbai, India,19th -20th Oct. 2012.
6. Simplifying Six Sigma implementation using Shining tools in QMS/ISO certified

environment, 12th Annual Conference of Society of Operations Management, I. I.
T., Madras, Chennai, India, 19th -21st Dec. 2009.
7.
An Investigative Study of an Impact of Quality Management System

Implementation on Key Technical-Decisions Made and their Implementation and
their Effects on Productivity/Performance of Small and Medium Scale Engineering
Industries (SMSEIs) in India, International Conference on Decision Making,
I.I.T., Bombay, Mumbai, India, 3rd -5th Jan. 2009.
8. Developing Integrated Model of Six-Sigma Methodology and Quality Management

System for Improving Quality Productivity and Competitiveness, 12th Annual
Conference of Society of Operations Management, I. I. T., Kanpur, India, 19th
21st Dec. 2008.
9. An investigative study of an impact of QMS implementation on key technical
decisions and its effects on productivity/ performance of small and medium scale
engineering industries (SMSEIs) in India 2nd Int. Conf. on ILSCM 2008, P.S.G
Tech, Coimbature, India, 7th - 8th Aug. 2008.
10.
An investigative study of the impact of QMS implementation on key technical
decisions and its effects on productivity / performance of Indian industries, 15th
ISME International Conference on Advances in Mechanical Engineering,
R.G.T.U., Bhopal, India, 18th -20thMar. 2008.
11. The Critical Review of Effect of Quality Management System Implementation
on Performance of Small and Medium Scale Engineering Industries, International
Conference on Advances in Manufacturing Engg.-2007, Manipal Institute of
Tech., Manipal, Karnataka, India, 24th -26th Oct. 2007.
12. A review of use of Artificial Neural Network used for Predicting Tribological
Properties, International Conference on Advances in manufacturing and
technology management, P.C.O.E., Mumbai, India, 18th -20th Jan. 2007.
Papers presented in National Conferences = 11
1. Use of Lean SMED tool for improving Productivity, State Level Conference at
D.C.O.E.R. Pune, MS, India, 25th -26th Mar. 2013.
2. Advance Product Quality Planning (APQP): A Quality Framework for developing
new products, Published in proceeding of National conference on Quality Engg.,
D.Y.C.O.E., Akurdi, 4th - 6thOctober 2007.
3. A review of machining performance evaluation of commercially available coatings

on tungsten based cemented carbide tools, Proc. Of National conference on Factory
Automation, Robotics Computing, NIT, Warangal, 18th-19th Jan. 2007.
4. Presented paper Prediction of change in friction in diesel engine by using Shaining
DOE Techniques, Published in proceeding of National conference on B. A. I. T.,
Coimbatoure, T.N., 11-12 April 2006.
5. Presented & Published An agent based computer approach for computer aided
process planning, proceeding of National conference on Sun Raising Technologies
by PCOE, Thane, Mumbai, 18-19 Nov.-2005.
6.
Presented & Published An agent based system approach for enhancing

manufacturing product development, proceeding of 1st national conference on
recent development in Mechanical Engineering SVERIS COE, Panndharpur, 18-19
Nov.-2005.
7. Published A genetic algorithm for conflict resolution in concurrent production

development, proceeding of a National conference on Sun raising technology,
PCOE, Thane, Mumbai,18-19 Nov.-2005.
8. Comparative analysis using analytical and finite element method of constant stress
developed between two rolling discs, Proc. Of National conference on
Technological Advancements in Mech. Engg. SIST, Hydrabad, 2-3 Dec.-2005.
9.
Published paper Fused deposition modeling method used for design and
preparation of rapid prototyping model of semi enclosed impeller, proceeding of
National conference on advances in CAD/CAM, JNTU, Kakinada, A.P., 27-28
Feb.2006.
10. Sixsigma an application of statistical methods to business process for improving

operating efficiencies A case study, National conference on recent trends in
Mechanical Engg. SRESCOE, Kopargaon,23-24 July-2004.
11. Face milling tool path generating of work part using unigraphics-CAM, National
Conference on Global Technologies in Manufacturing and Thermal Sciences, SETNU
Institute of Technology, 9-10 July-2004.
08) Departmental Administrative Responsibilities:

i)
Chairman NBA activities for Mech. Engg. Dept.
ii)
Member of Industrial visit committee.
09) Contribution in the University Activities:
Academic & Research coordinator of U.o.P. for D.C.O.E.R.
Working as Chairman of Manufacturing and Industrial Engineering Group for

setting new syllabus of various subjects under this group (U.G. and P.G.) [Total 7
Subjects covered], Syllabus detailing and Co-coordinator for M.C.Q.-DataBank,
Worked as subject Chairman[UG & PG programs],
Working as internal and external examiner for UG and PG programs (ME
Dissertation).
10) Membership of Scientific and Professional Society:
1. Associate of Institute of Mechanical Engineers (India), Kolkata.
2. Member of Indian Institute of Production Engineers.
11) Samstha Level administrative Responsibilities: 12) Subject teaching at Under Graduate Level:
B.E.:
Industrial Fluid Power

Operations Research
Management Information System
T.E.:
Metrology & Quality Control

Mechatronics
Industrial Engineering & Technology Management
S.E.:
Manufacturing Processes I & II .
13) Subject teaching at Post graduate level:

Approved PG Teacher of Uni. of Pune
M.E.:
Research Methodology
Measurement Techniques & Data Analysis
Advanced Manufacturing Processes
Management of Technology
14) Projects Carried out :

i) Effect of Hard Water on the performance of Solar Water Heater Tank
ii) Design and development of Solar Cooker (Vertical Shape)
15) Patents Title of the invention : IMPROVED HEATER APPARATUS
International classification : H01L21/00
Application No. : 2199/MUM/2007; Publication Date : 05/06/2009; Journal

No. - 23/2009; Can be accessed at
http://124.124.220.66/patentpublishedsearch/publishApplicationNumber....
Title of the invention : AN IMPROVED EXHAUST GAS HEAT RECOVERY
DEVICE
International classification : F28D15/02
Application No. : 315/MUM/2008; Publication Date : 23/07/2010; Journal
No. - 30/2010; Can be accessed at
http://124.124.220.66/patentpublishedsearch/publishApplicationNumber....
16. No. of Books Published with details

Year of
Publication
Title
Level of
Publication
Publisher
Books published as International Edition

April 2013 Integrating
ISO
9001
Quality Internationa
Management System with Six Sigma for l(E-Book)
Improving Productivity and Performance
of SMEs
May 2009
Metrology and Measurements
July 2009
Quality Control
June 2009
LAP
Publication,
Germany
Internationa Tata McGrawhill,

New Delhi.
l
Internationa
l
John Wiley,
New Delhi
Manufacturing Processes Planning and Internationa

System Engineering
l
DreamTech
Publication,
New Delhi.
Books published as National Edition

Oct. 2011
Quantitative and Decision Making

Tehniques
National
Nirali Publication,
Pune
June 2010
Industrial Engineering and Technology

Management 3rd Ed.
National
Tech-Max
Publication, Pune.
June 2010
Management Information System
National
Nirali Publication,
Pune
National
Nirali Publication,
Pune
Dec. 2009
Production Technology
Dec. 2007
Manufacturing Processes - II
National
Nirali Publication,
Pune.
Jan. 2007
Industrial Fluid Power 3rd Ed.
National
Nirali Publication,
Pune.
June 2005
Industrial Engineering And

Management
National
Nirali Publication,
Pune.
September
2004
Production Planning And Control
National
Satya Publication,
New Delhi.
1) Name: Dr. Gautam S. Chandekar

2) Designation:- Associate Professor in Mechanical Engineering
3) Qualification: Ph.D.(Mech.), MS (Mech.)
4) Experience: Teaching- 10 Years, Research 01 Years
5) Area of Interest: Machine Vibrations, Finite Element Method, Composite Material
Chandekar, G., Richardson, J., Melnikov, Y., and Pardue, S. \Green's Function
Method for an Axisymmetric Void Between Parallel Walls." Electronic Journal Of
Boundary
Elements,
5(2),
(2007).
Available
at:
http://ejbe.libraries.rutgers.edu/index.php/ejbe/article/view/790
Gautam S. Chandekar, Bhushan S. Thatte, and Ajit D. Kelkar, \On the Behavior of
Fiberglass Epoxy Composites under Low Velocity Impact Loading", Advances in
Mechanical Engineering, vol. 2010, Article ID 621406, 11 pages,
doi:10.1155/2010/621406,
(2010).
Available
at:
http://www.hindawi.com/journals/ame/2010/621406.html
Gautam S. Chandekar, Ajit D. Kelkar, and Ram V. Mohan, \Comparative Study of
Different Weave Architectures of Woven Textile Composites under Low Velocity
Impact Loading", ASME International Mechanical Engineering Congress and
Exposition,, Proceedings, Vol. 13, Part B, Pg. 1127 - 1131, (2009).
Bhushan S. Thatte, Gautam S. Chandekar, Ajit D. Kelkar, and Pramod
Chaphalkar, \ Studies on Behavior of Carbon and Fiberglass Epoxy Composite
Laminates under Low Velocity Impact Loading using LS-DYNA", 10th
International LS-DYNA Users Conference, Impact Analysis, Pg. 943 to 954,
(2008).
Ajit D. Kelkar, Gautam S. Chandekar, B. S. Thatte, Ram Mohan and R. Bolick,
\Modeling of Hybrid Composites under Low Velocity Impact Loading", 4th
International Conference on Advances in Structural Engineering and Mechanics
(ASEM'08), (2008).
Ajit D. Kelkar, Gautam S. Chandekar, and Ram V. Mohan, \Prediction of Material
Properties of Single Walled Carbon Nanotube using MD Simulations", 2008 8th
IEEE Conference on Nanotechnology, IEEE-NANO, Pg. 370 to 373, (2008).
Sachin Shendokar, Ajit D. Kelkar, Ram V. Mohan, Ronnie Bollick, Gautam S.
Chandekar, Effect of Sintering Temperature on Mechanical Properties of
Electrospun Silica nano fibers", ASME International Mechanical Engineering
Congress and Exposition, Proceedings, Vol. 13, Part B, Pg. 1133 to 1138, (2009).
Gautam S. Chandekar, Richard D. Hercamp, Douglas D. Hudgens \Modeling of
the Effect of Coolant Physical Properties on the Potential of Diesel Engine Liner
Cavitation", SAE (Society of Automotive Engineers) Technical Paper,

doi:10.4271/2012-01-1682, (2011).
Gautam S. Chandekar, Ajit D. Kelkar, Experimental and Numerical Investigations
of Textile Hybrid Composites Subjected to Low Velocity Impact Loadings, The
Scientific World Journal Volume 2014 (2014), Article ID 325783, 14 pages
http://dx.doi.org/10.1155/2014/325783
i)
Project coordinator
9) Subject teaching at Under Graduate Level:

TOM I
TOM II
FEM
1)Name: Sunil Prabhakar Divekar

2)Designation:: Sr. Lecturer/Assistant Professor.
3) Qualification: ME( Metallurgy)
4)Experience:: Industry 01 Years, Teaching- 26 Years, Research 00 Years
Area of Interest: Metallurgy; Metal testing; Stress corrosion cracking
MHRD-ISTE workshops
Consultancy
Coordinator for Lab Maintenance
SE Mentor
Autonomy
6)Samstha Level administrative Responsibilities:

Member of LIC comity.
Material Science
Metallurgy
Basic mechanical Engineering.
1)Name: Parag Sudhir Chaware

2)Designation:: Assistant Professor.
3) Qualification: ME
4)Experience:: Industry 01Years, Teaching- 14 Years, Research 00 Years
5)Area of Interest: Heat Transfer, Fluid Mechanics
6)Workshop Attended
Computational Fluid Dynamics - 3-Dayt National Level workshop at D.Y. Patil
College of Engineering, Pune
Two Week ISTE workshop on Computational Fluid Dynamics conducted by IIT
Bombay
7)Paper Presented/ Published:
CITICOMS -2007 Coimbatore,27 -28 August 2007, Comparison of turbulence
Models and near wall treatments for the flow in a circular tube with the twisted
tape insert.
FLUNT user conference, Bangalore, Nov 07 2007, Heat transfer Augmentation
using twisted tape insert,
FMFP-2013, NIT Hamirpur, 12-15 Dec,2013, Selection of turbulence model for
flow with twisted tape insert,
FMFP-2014, IIT Kanpur,14-16 Dec. 2014,Effect of Reynolds number on flow and
heat transfer characteristics of pipe flow with twisted tape insert
Head of the Department - Jan-2008 - Jan-2013
Industry Institute Interaction
Class Teacher - BE
Mentor TE
Worked as Assistant CAp Director
Paper Setter
Examiner
Moderator
Heat transfer
Fluid Mechanics
Fluid Power
Engineering Graphics
CFD analysis of Heat transfer through a Pipe with twisted tape insert- University of Pune
- 2008-2010
1.
2.
3.
4.
Name:
Poonam Arun Bhore
Designation:: Assistant
Professor
Qualification: M.Tech
Mechanical (Design)
Experience: Industry 00 Years, Teaching- 9.6 Years, Research 00 Years
5. Area of Interest: Mechanical Design, Heat Transfer

6. Workshop Attended
Advances in Analysis, Measurement and Control of Noice Vibration and
Harshness , conducted by Cummins college of Engineering for Women,
Karvenagar,2014
ISTE STTP on Thermodynamics in Mechanical Engineering
conducted by IIT,Bombay at CCOEW, Pune
ISTE STTP on Introduction to Research Methodology
conducted by IIT,Bombay at CCOEW, Pune
TEQIP on Recent Trends in Precision Mechanical Measurements at
SCOE, Pune
TEQIP on Advances in Heat Exchanger Technology at
SCOE, Pune
7. Paper Presented/ Published: NIL
8. Departmental Administrative Responsibilities:
Departmental Placement Co-ordinator
Department News Letter Staff Co-ordinator
Alumane Association Department Co-ordinator
9. Contribution in the University Activities:
Worked as Junior Supervisor
Worked as Custodian for University Examination
Paper setter For Theory of Machines I and II
Worked as chairman of Theory of Machine and Machine Design -II course
10. Subject teaching at Under Graduate Level:
Theory of Machine I
Theory of Machine II
Quantitative Techniques and Decision Making
Strength of Material
Basic Mechanical Engineering
Engineering Graphics-I
Engineering Graphics II
Basic Mechanical ENgineering
1)Name: Rujuta Ameet Agavekar

3) Qualification: M.Tech
5)Area of Interest: Thermal Engineering
6)Workshop Attended
Two Week ISTE workshop on Thermodynamics in Mechanical Engineering
conducted by IIT Bombay
One Week FDP under TEQIP-II on Advances in Heat Exchanger Technology
One Week FDP under TEQIP-II on Recent Trends in Precision Mechanical
Measurements
Program on Steam Engineering and Energy Conservation
Two Week ISTE workshop on Heat Transfer conducted by IIT Bombay
Two Week ISTE workshop on Computational Fluid Dynamics conducted by
IIT Bombay
Two Week ISTE workshop on Computer Programming conducted by IIT
Bombay
SE Mentor
TE Seminar Coordinator
Paper Setting - Thermodynamics
Paper Evaluation - Thermodynamics, Refrigeration and Air Conditioning

Thermodynamics
Refrigeration and Air Conditioning
Numerical Methods and Optimization
1) Name: Ajit Ashok Bhosale

2) Designation: Assistant Professor.
3) Qualification: ME
4) Experience: Industry 02Years, Teaching- 14 Years, Research 00 Years
5) Area of Interest: Manufacturing Engineering, Cad Cam Automation.
Special Methods of Teaching Applied Mechanics in Rajiv Gandhi Institute of
Technology Mumbai for two week.
Information Technology Orientation for Engineering Teachers in Dwarkadas J.

Sanghvi College of Engineering, Vile Parle, Mumbai for two week.
Computer Aided Solutions for Engineering Applications in Dwarkadas J. Sanghvi

College of Engineering, Vile Parle, Mumbai for two week.
International Conference on Advances in Materials Processing and Characterization

(AMPC2006) Chennai for three days.
National Conference on Advances in Engineering & Inspection & Metrology in
NMIMS Mumbai for One day.
ISTE Convention of Maharashtra-Goa Chapter at Imperial College of Engineering &
Research Pune for Two days.
Innovation 2008 is attended in College of Engineering In Kopargaon
International Journals:
A. A. Bhosale, K.K. Sundaram Non Destructive Method for Ripening Prediction of
Papaya Accepted for Elsevier Procedia Technology. (In press).
A.A. Bhosale, K. K. Sundaram Firmness prediction of the apple using capacitance
measurement. Elsevier Procedia Technology, Vol. 12 (2014) pages 163-167.
A.A. Bhosale, K. K. Sundaram Equation for predicting shelf life of an apple. Applied
Mechanics & Materials vols. 52-54 (2011) pages 1936-1941.
A.A. Bhosale, K. K. Sundaram Equation for predicting shelf life of Fruit
(Apple),Journal of Biotechnology by Elsevier, Vol 150, supplement, November 2010
page 525.
A.A. Bhosale, K. K. Sundaram The life equation Journal of Biotechnology by Elsevier
VOL-136, Supplement 1, page 108, 2008.
A.A. Bhosale, K. K. Sundaram Animal Life Expectancy on energy intake. International

Journal of Recent trends in Engineering Vol1.No-6, pages 77-80, 2009.
International Conference:
A.A. Bhosale, K. K. Sundaram Life Prediction equation for Human Beings IEEE
transaction 2010. ISBN: 978-1-4244-6775-4, DOI10.1109/ICBBT.2010.5478965 .
Vibration Analysis Of An Assembly By Converting It Into A Simple Mass
Spring System ,for international conference on Advances in Materials Processing
and Characterization (AMPC2006) Chennai(with Vasudevan Hari, Lakal Narendra
and Rajendra Khavekar).
A Modified Approach in Precision Manufacturing by Abrasive Flow
Machining, in 2005 National conference on Advances in Mechanical Engineering
(Hyderabad: Vasavi College of Engineering, Hyderabad, Andhra Pradesh, India.,
May, 2005). (with Vasudevan Hari, Rajendra Khavekar and Lakal Narendra).

Head of Workshop Department.
SAE Faculty Advisor.
Industrial Visits.
Worked as Assistant CAP Director For Four Years.
External & Internal Examiner for University Examination.
Worked as Senor Supervisor for various universities Examination.
SAE India
SOM
CAD/CAM
Basic mechanical Engineering.
EG-I
12) Subject teaching at Post graduate level: CAD Cam

15)Patents A. Bhosale, K.K. Sundaram An Instrument for predicting shelf life of fruits Patent
Application No. 3377/ MUM/ 2014
1)Name: Nitin Raghunath Patil.

3) Qualification: M.Tech.
5)Area of Interest: Machine Design
6)Workshops Attended :
One week training program on Making Teaching Learning Process Effective,
organised by ISTE chapter, AISSMSs COE, Pune.
One week Faculty Development Program, organised by Samit Management
Training Solutions and , AISSMSs IOIT, Pune.
Two week ISTE workshop on Engineering Thermodynamics, in Cummins
C.O.E.W., Pune.
Two week ISTE workshop on Computer Programing, in Cummins C.O.E.W., Pune.
One week Faculty Development Program, on Advances in Heat Exchanger
Technology, under TEQIP, organised by, Sinhagad C.O.E., Pune.
One week Faculty Development Program, on Automotive Emission and Control
Technologies, under TEQIP, organised by, Sinhagad C.O.E., Pune.
Paper presented on, Condition Monitoring of Rolling Contact Bearings using
C.W.T., at National Level Conference AIM-2008, Manipal Instt. of Technology.
Paper on, Design, Development and Performance Analysis of Coil Pump, published
in International Journal, Applied Mechanics and Materials- 2014, Trans Tech
Publications, Switzerland.
SAE Coordinator.
M.E. Coordinator .
Class Teacher -T.E.(Mech.).
In-charge, Engg.Graphics.
Examiner for subjects, Design of Machine Elements -I and II, Engg. Graphics.
Paper Setter for the subjects, Design of Machine Elements -I and II, Engg. Graphics.
Member of the Syllabus Setting Committee for the subjects, Design of Machine
Elements -I and II.
Member of SAE, India.
11)Samstha Level administrative Responsibilities: Nil.
12)Subjects teaching at Undergraduate Level:
Design of Machine Elements - I
Design of Machine Elements - II

Engg. Graphics.
Basic Mechanical Engg.
Design, Development and Performance Analysis of Helical Coil Pump.
Design, Development and Performance Analysis of Spiral Coil Pump.
1)Name: Harish Mohan Shinde.

3) Qualification: M.E. Mechanical (Automotive Engg.)
4)Experience:: Industry 04 Years, Teaching- 5.5 Years, Research 00 Years
5)Area of Interest: Manufacturing Technology, Automotive Engg.
6)Workshops Attended :
One day Workshop on Advance techniques in Modern Day Mechatronics At
AISSMSCOE, pune-5.
Attended One day workshop on SCI lab offered by IIT Bombay, In Mechanical
Department on 20th April 2012.
Attended Two days workshop on How to write effective conference paper
offered by IIT Bombay, at MES IMCC, Pune. On 18th and 19th February 2012.
One Week Faculty Development Programme on "AUTOMOTIVE EMISSION
AND CONTROL TECHNOLOGIES (AECT)" Under TECHNICAL EDUCATION
QUALITY IMPROVEMENT PROGRAMME [TEQIP-II], On 08 -12 October,
2012.
One Week Faculty Development Programme on "ADVANCES IN HEAT
EXCHANGER TECHNOLOGY (AHET 2013)" Under TECHNICAL EDUCATION
QUALITY IMPROVEMENT PROGRAMME [TEQIP-II], On 08 -12 April, 2013.
Three Days Workshop on ADVANCES IN ANALYSIS, MEASUREMENT AND
CONTROL OF NOICE, VIBRATION & HARSHNESS on 19th-21st June 2013.
Two week ISTE Workshop on COMUTER PROGRAMMING, On 20th May
21st June 2014.
Syllabus Implementation Workshop on Manufacturing Processes-I at AISSMS
College of Engineering, Pune.
Syllabus Implementation Workshop on Computer Aided machine Drawing at
MIT College of Engineering, Pune.
FDP on Automotive Electronics from 3rd November 2014 to 8th November
2014 in KPIT Bangalore.
Participated & Presented Paper Effect of change in compression ratio on
performance of diesel engine using Karanja oil biodiesel in National
Conference Emerging Trends in Engineering, Science, Technology and
Management on 24 April 2012.
Participated & Presented Paper in Effect of change in compression ratio on
performance of diesel engine using Fish oil biodiesel International
Conference ICMET2012 on 26 May 2012.
Training Activity coordinator
College website department coordinator

SAE BAJA Coordinator.
SE Mentor.
Autonomy
Windows licenses (With A S Shinde)
Xerox research group department coordinator
Cultural activity coordinator
Examiner for subjects, Manufacturing Processes I & II, Manufacturing Process,
Production Technology.
Paper Setter for the subjects, Manufacturing Processes I & II, Manufacturing Process,
Production Technology.
External Examiner for Subjects MDCG, GM, AT, CAMD
Member of SAE, India.
11)Samstha Level administrative Responsibilities: Nil.
12)Subjects teaching at Undergraduate Level:
Subject
Engineering Graphics ( I , II )
Manufacturing Processes I
Applied Thermodynamics
Computer Aided Machine Drawing
Manufacturing Processes II
Automotive Engineering
Class
FE
SE
SE
SE
TE
BE

Effect of change in compression ratio on performance and emission of IC engine by
using Biodiesel (Karnaja oil and Jatropha oil).
Effect of change in compression ratio on performance and emission of IC engine by
using Biodiesel (Acid oil)
1) Name: Shridhar Ashok Kedar

2) Designation:- Assistant Professor in Mechanical Engineering
3) Qualification: M.Tech. Pursuing Ph.D.(Mech.Engg.)
4) Experience: Industry 01 Year, Teaching- 6 Years
5) Area of Interest: Solar Energy, Energy Conservation
i) STTP on Energy Conservation and Management from 22nd Dec.2009 to 29th
Dec.2009 at NIT Surat.
ii) 2 Weeks ISTE workshop on Thermodynamics in Mechanical Engineering conducted
through IIT Bombay and Remote Center Cummins COE for Women Karvenagar
Pune
on 14th June 2010 to 24th June 2010
iii) FDP on Advance in Hybrid Energy System from 26th June 2011 to 2nd July 2011 at
NIT Calicut
iv) 2 Weeks ISTE workshop on Heat Transfer conducted through IIT Bombay and
Remote Center Cummins COE for Women Karvenagar Pune on 29th Nov. 2011 to
10th Dec. 2011
v) One Week workshop on Advances in Heat Exchanger Technology on 8-12 April 2013 in
Sinhgad college of Engineering Pune
vi) One Week workshop on Recent Trends in Precision Mechanical Measurements on 26
Nov.-1 Dec.2012 in Sinhgad college of Engineering Pune
i) Energy Conservation Technology - Waste Heat Recovery, Presented , National
Conference, A G Awate College of Engineering Hadapsar, Date :- 5-7 March 2010
ii) Lateral Transfer Device for Hospital Stretcher Presented and Published ICMO2013
New Delhi & Published Advance Material Research Journal ISSN 1022-6680
iii)
Effect of Hard Water on the performance of Solar Water Heater Tank, Presented,
International Conference on Environment & Energy JNTU Hyderabad Date :-15-17
Dec.2014

i)
Co-ordinator for Kirloskar Vasundhara Energy & Environmental Group.
ii)
Co-ordinator for Conducting Guest Lecture Series in the department.
iii)
BE Mentor
iv)
SAE Supra Co-Ordinator

i)
External Sr.Supervisor - Shri Chhatrapati Shivajiraje College of Engineering

Bhor, Pune
ii)
Paper Setter for Energy Audit & Management.

i) Membership of Solar Energy Society of India
Energy Audit & Management
Industrial Heat Transfer Equipments
Engineering Graphics I,II
i) Effect of Hard Water on the performance of Solar Water Heater Tank
ii) Design and development of Solar Cooker (Vertical Shape)
1) Name:
Amit P.Rajurkar
2)Designation::
Assistant
Professor
3) Qualification:
M.E
4)Experience::
Industry 00 Years, Teaching- 14years , Research 00 Years
(Heat and Power) (Pursuing)
5)Area of Interest : Fluid Mechanics
, Heat Transfer
, Turbomachines
6)Workshop Attended
Advanced
and Recent Trends in Industrial Hydraulics, By Cummins
college of
Engineering for Women, Karvenagar,2014
Two Week ISTE workshop on Thermodynamics in Mechanical Engineering
conducted by IIT Bombay
SE Class Teacher
Dept.Activities
Higher studies record of students.
SE Mentor
Autonomy
Worked as Senior Supervisor,Paper Setter and Astt.CAP Director
Fluid Mechanics
Turbomachines
1) Name: Avinash Sudam Shinde

2) Designation: Assistant Professor
3) Qualification: M.E. Mechanical (Design)
4) Experience: Industry 2.5 Years, Teaching- 04 Years, Research 00 Years
5) Area of Interest: CAD, Design
i. ISTE Workshop on Computer Programming from 20 May 2014 to 21 June 2014.
ii. Writing Effective Conference paper for Engineering/Science Teachers conducted by
IITB, on 18-19 February 2012.
iii. Two days workshop on GD&T conducted on 25-26 February 2011
i. Avinash S. Shinde, Dr.H.V.Vankudre, Dr.C.S.Pathak, Fatigue analysis of crankshaft
section under bending with consideration of induction hardening International
Journal of Advances in Management, Technology & Engineering Sciences, Vol I,
issue 9 (i), June 2012.

i. CAD/CAM & Automation
ii. Computer Aided Machine Drawing
iii. Basic Mechanical Engineering
iv. Engineering Graphics-II
1)Name: NILESH RAMESH KOLHALKAR

3) Qualification: M.Tech.(Mechatronics), M.B.A:OR & SCM
4) Experience: Teaching: 6 Years 6 Months, Industry: 01 Year, Research 0 Years
5) Area of Interest: Mechanical measurement and control, Mechatronics, Automation,
Hydraulics and Pneumatics,Industrial Robotics
1)
National level workshop Non-conventional Energy Resources sponsored by UOP
2)
State level workshop on Heat and Mass Transport Phenomenon sponsored by UOP
3)
Two days workshop on Best practices in Engineering Education sponsored by UOP
4)
Certified Course on Industrial Automation, Instrumentation dept, C.O.E.P, Pune.
5) Certified Course on MATLAB & Simulink Toolbox for research form C.O.E.P,
organized by Mechanical engineering dept, Pune.
6) One day workshop on Teaching Methodology for Mechatronics for T.E Mechanical
engineering students, Sponsored by University of Pune.
7)
One day workshop on Micro-Machining sponsored by University of Pune.
8)
Two days State level workshop Green Nanotechnology, sponsored by UOP.
9) One day workshop on Intelligent robotics and Industrial Automation, Sponsored by

University of Pune.
10) 2 Week ISTE workshop on Introduction to Research Methodology, Organized by IIT
Bombay, Sponsored by MHRD, Dr. D.Y.Patil Institute of Engg. Pimpri, Pune.
July 2012- June 2013
Three day workshop attended on Advances in analysis, measurement and control of
noise, vibration & harshness at MKSSSs Cummins College of Engineering, Pune.
19th to 21st June 2013
Two week ISTE workshop on Computer Programming conducted by Indian
Institute of Technology Bombay. 20th May to 21st June 2014

National Level Technical Paper on Mechatronics and its applications, May-2007
1)
2) International Conference ICAME-2012, Paper on Safety analysis of loading Capacity

of a wall climbing robot with variation in distance of C.G from a wall, held in Amrutvahini
College of Engg, Sangamner, which was held on 12-14th March 2012.
3) International Journal of Engineering & Innovative Technology (IJEIT),Paper on Wall
Climbing Robots: A Review, Vol.1, Issue 5, Sr. No. 44, pp 227-229, 5th May 2012,
ISSN:2277-3754
4) National Conference RAM-2012 Paper entitled as Experimental investigation of
lifting capacity of a wall climbing robot with variation in distance of Centre of Gravity from
the wall and vacuum level, SVNIT Surat, 27th-29th May 2012.
i. ROBOCON In-charge (International Level Robotics Competition by Asia Pacific
Broadcasting Union,ABU)
ii. Co-ordinator for OUTLOOK Magazine Survey at Institute Level.
iii. Time Table Co-ordinator, F.E Co-ordinator, F.E online Exam Co-ordinator.
iv. T.E Mentor,Sports Activity.
i.Examiner for Basic Mechanical Engineering,Engg. Graphics,H & P,Mechatronics
10) Samstha Level administrative Responsibilities:
i. Sports In-charge for DAMINI & PENTAKLE
ii. OUTOLOOK MAGAZINE SURVEY IN-CHARGE.
Engineering Graphics I.
Basic of Mechanical Engg.
Hydraulics & Pneumatics
Mechatronics
Technical Skill Development
1) Name: Yashwant Shrirang Munde

3) Qualification: M.Tech.(Mech-CAD/CAM & Automation), Pursuing PhD
4) Experience: Teaching: 5 Years 6 Months, Industry: 01 Year, Research 02 Years
5) Area of Interest: Natural Fiber Reinforced Composite Materials,
Finite Element Method, Industrial Robotics
Workshop attended on Hydro-Forming in Radiance08 at IIT Bombay on 15-16th
March 2008
One day workshop attended on Implementation of syllabus of MD & CG (2008
course) for S. E. mechanical Engg. at VIIT Pune. 11th July 2009
One week STTP attended on FEA Tool for Non-Linear Analysis at Dr. J. J.
Magdum College of Engineering, Jaysingpur. - 21st to 26th Dec 2009
One day workshop attended on Geometry Modeling using Solid works at PEESs
Modern COE, Pune. - 9th Jan 2010
One day workshop attended on Implementation of syllabus of Geometric Modeling
(2008 course) for S. E. mechanical Engg. at Vidya Pratistans College of
Engineering, Baramati. 25th Feb. 2010
One day workshop attended on Introduction to Innovation & Entrepreneurship at G.
H. Raisoni Institute of Engineering & Technology, Pune. 2nd March 2010
Three weeks Industrial Training Program at Precision Automation & Robotics India
Ltd. (PARI), Pune. 13th June 2011 to 1st July 2011
Two day workshop attended on Vibration diagnostics and condition monitoring of
machine elements at MIT College of Engineering, Pune. 7th 8th October 2011
One day workshop attended on syllabus implementation of Robotics at PVGs
College of Engineering, Pune. 14th January 2012
Three day workshop attended on Recent trend in heat exchangers at VIIT, Pune.
27th to 29th January 2012
One week STTP attended on Virtual instrumentation using LABVIEW at VIIT,
Pune. 05th to 09th March 2012
One day workshop attended on Faculty development program on robotics at
MAEERs MIT, Pune. 10th March 2012
Three day workshop attended on Advances in analysis, measurement and control of

noise, vibration & harshness at MKSSSs Cummins College of Engineering, Pune.
19th to 21st June 2013
One week TEQIP-II sponsored Faculty Development Program attended on
Nanomaterials and Nanocomposites at College of Engineering, Pune (COEP).
02nd to 06th December 2013
One week TEQIP sponsored Faculty Development Program attended on A
Workshop on Characterization of Macro-, Micro- and Nanomaterials at College of
Engineering, Pune (COEP). 02nd to 06th June 2014
Two week ISTE workshop on Computer Programming conducted by Indian
Institute of Technology Bombay. 20th May to 21st June 2014
Paper in International Journal
[1] Yashwant S. Munde, Prashant R. Anerao Thermal analysis of feeder neck using FEM
for a metal casting International Journal of Emerging Technology and Advanced
Engineering (ISSN 2250-2459) Volume 2, Issue 8, August 2012.
Paper in International Conferences:
[1] Yashwant S. Munde, Prof. S. V. Sawlekar Design and analysis of fiber reinforced
composite laminates for optimum weight based on strength criteria International
conference on advances in mechanical Engineering at SVNIT, Surat, Gujarat, India. 4 to 6th
January 2010, PP 351-356.
[1]
Yashwant S. Munde, Nisarg Joshi, Satish Dhole, Rushali Daga, Abhisheek
Deahpande, K.D. Deodhar, A. P. Kulkarni Analysis of multi-layered composite thin
cylindrical tube International conference on functional materials for defense, ICFMD-2012
at Defense Institute of Advanced Technology(DIAT), Pune, Maharashtra, India. 18th to 20th
May 2012.
[2]
Yashwant S. Munde, Nisarg Joshi, Satish Dhole, Rushali Daga, Abhisheek
Deahpande, K.D. Deodhar, A. P. Kulkarni Analysis of multi-layered hybrid composite
cylindrical tube International conference on functional materials for defense, ICFMD-2012
at Defense Institute of Advanced Technology(DIAT), Pune, Maharashtra, India. 18th to 20th
May 2012
Paper in National Conferences:

[1] Yashwant S. Munde, Ravindra B. Ingle Experimental Investigation of biocomposite
reinforced with natural fibers Regional Research Conference Innovation 2014, BCUD,
University Of Pune. 2nd May 2014.
i. Co-ordinator for SUPRA (SAE INDIA National Competition)
ii. BE Mentor,
iii.BE Result Analysis
i. Paper checking for Automobile Engg, Robotics, CAD/CAM & Automation
ii. BCUD Research Project Co-Principal Investigator
i. ISTE
1. CAD/CAM and Automation
2. Robotics
3. Automobile Engineering
4. Geometric Modeling
5. Machine drawing and computer graphics
6. Engineering Graphics I
7. Basic of Mechanical Engg
12) Subject teaching at Postgraduate level:
1. Robotics
1. Study on Two Wheeler Chassis dynamometer and development of inspection and
maintains dynamometer, Sponsored By: Dynomerk Controls, Pune.
1) Name: Shashikant Pandurang Soman

2) Designation: Assistant Lecturer
3) Qualification: B.E. Mechanical
4) Experience: Industry 0 Year, Teaching- 14.5 Years
5) Area of Interest: Heat Power Engg
i.
ii.
NSS departmental coordinator

FE result

i.
ii.
Basic Mechanical Elements

Engg Graphics I & II
8) No. of Books Published with details

i.
Engineering Drawing, Dnyaneshwar Vidyapeeth Prakashan.
1) Name: Prakash Gangadhar Kagne

3) Qualification: M. Tech
4) Experience: Industry 1 Year, Teaching- 1.5 Years
5) Area of Interest: Machine Design, Structural Health Monitoring, Fracture Mechanics
i.
ii.
iii.
Faculty Orientation Workshop on Design of Machine Elements I (7-8 July 2014)

Workshop on Syllabus Implementation of Theory of Machine II (17th July 2014)
Workshop on Advances and Recent Trends in Industrial Hydraulics (8-10th Dec
2014)

i.
Time Table (To assist Prof NRK)
ii.
Coordinator for Dept. Faculty/Students Achievements Record
iii.
TE Mentor
i.
Design of Machine Elements - I
ii.
Basic Mechanical Elements
iii.
Engg Graphics I & II
1) Name: Vahande Mandar Ashok.

2) Designation: Assistant Professor.
3) Qualification: M.E(Design).
4) Experience: Industry 00 Years, Teaching- 4.5 Years, Research 00 Years
5) Area of Interest: Machine Design
6) Workshops Attended :
Two week ISTE workshop on Engineering Thermodynamics, K.K.Wagh
COE,Nashik.
State Level Workshop on Emerging Trends in Solar Energy and Fuel Cells ,PVG
COE Nashik.
Paper presented on, Experimental Testing by Mechanical Drive 3D Turbula Shaker
Mixer to Improve Homogeneity and MAintain Moisture ratio of Turmeric Powder
and Sodium Sulphate Mixture, in Technospire SRES COE Kopargaon.
Deptt. Library Incharge.
Industrial Visit Incharge.
Result Analysis.
9) Subjects teaching at Undergraduate Level:
Theory of Machines - I
Computer Oriented Numerical Methods
Machine Drawing and Computer Graphics
Strength of Material
Engg. Graphics.
Basic Mechanical Engg.
1)Name:
Tejal Tryambak Wani
2)Designation::
Assistant Professor
3) Qualification:
M.Tech (Heat and Power)
4)Experience::
Industry 00 Years, Teaching- 1.5 Years, Research 00 Years
5)Area of Interest : Refrigeration , Heat Transfer

6)Workshop Attended
Advanced and Recent Trends in Industrial Hydraulics, By Cummins college
of Engineering for Women, Karvenagar,2014
Engineering Mechanics, ISTE Workshop, by IIT Bombay,2013
Recent trends in Heat Exchanger, held at VIIT, Pune (2012)
Recent trends in Heat Exchanger,held at D.Y Patil College of Engg, Akurdi,
Pune (2013)
Development and Performance Analysis of Multi Evaporative System,
Presented/Published, International Journal of Engineering Development and
Research, ISSN:2321-9939, Vol.2, Issue 2, pp.2918-2921, June 2014.
Departmental Library
News Letter activity (to Assist Prof PAB)
Record of Industrial Visits
Department budget Preparation (To assist Prof PAC)
Autonomy
10)Membership
of Scientific and Professional Society:
ISHRAE
Applied Thermodynamics
Engineering Graphics-I
Engineering Graphics-II

Mech Mand Dis 2015

Uploaded by

Copyright:

Available Formats

Mech Mand Dis 2015

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mech Mand Dis 2015

Uploaded by

Copyright:

Available Formats

1)Name: Dr. Ravindra B.

ASME World Congress

World Maritime Congress

8)Departmental Administrative Responsibilities:

Overall Responsible for all committees

9)Contribution in the University Activities:

Chairman, Paper setter and Moderator

10)Membership of Scientific and Professional Society:

12)Subject teaching at Under Graduate Level:

01) Name: Dr. Anand K. Bewoor

22nd Oct -3rd

ISTE sponsored Two week SDP on Reliability and Failure

ISTE sponsored Two week SDP on Metrology and Quality

Two Week SDP on Developing Technology Competencies,

Workshops / Seminars / Conference Attended

Title of Workshops / Seminars / Conference & Conducted at

9th July 2013

One day workshop on Implementation of revised syllabus of

One day workshop on syllabus setting for SE, TE & BE organized

One day workshop on Industry Institute Interaction organized by

11th July 2009 One day workshop on Implementation of revised syllabus of

Two days training programme on 3D Coordinate Measuring

Three days workshop on Role of Engineers in rural development

Two Days Workshop on Research Methodologies, M.A.E.,

CEEP on MATLAB, V.I.I.T., Pune.

Two days workshop on Research in Engineering, organized by

07) Paper Presented/ Published:

Review of parameters affecting productivity of Textile SMEs, International J. of

Critical review of research in use of laser beam welding in automotive sector,

An empirical analysis of impact of QMS/ISO implementation on

Role of Lean Six Sigma in Quality Management Practices: A Case Study,

Study of Variables of Textile Manufacturing Industries and their effects on

Postural Analysis and Quantification of Fatigue by using RULA and REBA

An Expert Advisory System for ISO 9001 based QMS of Manufacturing

6. Simplifying Six Sigma implementation using Shining tools in QMS/ISO certified

An Investigative Study of an Impact of Quality Management System

8. Developing Integrated Model of Six-Sigma Methodology and Quality Management

3. A review of machining performance evaluation of commercially available coatings

Presented & Published An agent based system approach for enhancing

7. Published A genetic algorithm for conflict resolution in concurrent production

10. Sixsigma an application of statistical methods to business process for improving

08) Departmental Administrative Responsibilities:

Chairman NBA activities for Mech. Engg. Dept.

Member of Industrial visit committee.

09) Contribution in the University Activities:

Academic & Research coordinator of U.o.P. for D.C.O.E.R.

Working as Chairman of Manufacturing and Industrial Engineering Group for

Industrial Fluid Power

Metrology & Quality Control

Manufacturing Processes I & II .

13) Subject teaching at Post graduate level:

14) Projects Carried out :

Application No. : 2199/MUM/2007; Publication Date : 05/06/2009; Journal

16. No. of Books Published with details

Books published as International Edition

Metrology and Measurements

Internationa Tata McGrawhill,

Manufacturing Processes Planning and Internationa