This technical data sheet provides information on Durosan Medium Tex, a flexible exterior water based textured paint. It is based on copolymer emulsion and reinforced with coarse aggregates. It is excellent for covering minor cracks and undulations in cement plaster surfaces both interior and exterior. It has a solids content of 54% by volume and VOC of approximately 2 g/l. The product can be applied using a spatula or trowel and is recommended to be applied in two coats over a primer at a spreading rate of 1.5 m2/l.
This technical data sheet provides information on Durosan Medium Tex, a flexible exterior water based textured paint. It is based on copolymer emulsion and reinforced with coarse aggregates. It is excellent for covering minor cracks and undulations in cement plaster surfaces both interior and exterior. It has a solids content of 54% by volume and VOC of approximately 2 g/l. The product can be applied using a spatula or trowel and is recommended to be applied in two coats over a primer at a spreading rate of 1.5 m2/l.
This technical data sheet provides information on Durosan Medium Tex, a flexible exterior water based textured paint. It is based on copolymer emulsion and reinforced with coarse aggregates. It is excellent for covering minor cracks and undulations in cement plaster surfaces both interior and exterior. It has a solids content of 54% by volume and VOC of approximately 2 g/l. The product can be applied using a spatula or trowel and is recommended to be applied in two coats over a primer at a spreading rate of 1.5 m2/l.
This technical data sheet provides information on Durosan Medium Tex, a flexible exterior water based textured paint. It is based on copolymer emulsion and reinforced with coarse aggregates. It is excellent for covering minor cracks and undulations in cement plaster surfaces both interior and exterior. It has a solids content of 54% by volume and VOC of approximately 2 g/l. The product can be applied using a spatula or trowel and is recommended to be applied in two coats over a primer at a spreading rate of 1.5 m2/l.
Product description Type This product is a high quality flexible exterior water based textured paint. Based on copolymer emulsion, reinforced with coarse, rock hard aggregates.
Features and benefits
This is an excellent material to cover minor cracks and undulations present in cement plaster.
Recommended use Ideal for both exterior and interior surfaces.
Application data Remarks Handle with care. Stir well before use.
The product can be applied by
Spatula, Trowel (Made of stainless steel). Consult Jotun for additional information, as required.
Conditions during application
The temperature of the substrate should be minimum 10 C and at least 3 C above the dew point of the air, temperature and relative humidity measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper drying.
Date of issue:
07.05.2014.
by Jotun Group
Page: 1/3
This Technical Data Sheet supersedes those previously issued.
The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com.
Technical data sheet
Durosan Medium Tex
Spreading rate per coat
Theoretical Theoretical Theoretical
Minimum Maximum Typical
1 m/l 2 m/l 1,5 m/l
Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature, wastage during painting etc.
Thinner Water
Dilution Maximum 10 %
Cleaning of painting tools
Water
Drying times Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. The figures given in the table are typical with: Good ventilation (Outdoor exposure or free circulation of air) Typical film thickness One coat on top of inert substrate The given data must be considered as guidelines only. The actual drying time and time before recoating may be shorter or longer, depending on the ambient temperature, film thickness, ventilation, humidity, underlying paint system, requirement for early handling and mechanical strength etc. 1. Recommended data given is, for recoating with the same generic type of paint. 2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total thickness of previous coats applied. 3. The surface should be dry and free from any contamination prior to application of the subsequent coat. Relative Humidity (RH) Substrate temperature Surface (touch) dry Hard dry Dried to over coat, minimum
50 % 10 C 6h 48 h 48 h
50 % 23 C 3h 24 h 24 h
50 % 40 C 1h 18 h 1h
Directions for use
Surface preparation The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of foam release agents must be removed. A light sanding with suitable abrasive material is recommended before application. Any resulting dust/loose particles must be removed.
Recommended paint system
Primer Jotashield Alkali Resistant Primer or Acrylic Emulsion Primer or Tex Primer : 1 Coat(s)
Date of issue:
07.05.2014.
by Jotun Group
Page: 2/3
This Technical Data Sheet supersedes those previously issued.
The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com.
Technical data sheet
Durosan Medium Tex
Topcoat Durosan Medium Tex : 2 Coat(s)
Remarks Other systems may be specified, depending on area of use. Contents of packaging with different batch numbers must be mixed together before use. Please refer to the Decorative Sales Department for technical advice.
Storage The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle with care.
Health and safety
Please observe the environmental and precautionary notices displayed on the container. A Material Safety Data Sheet for the product has been issued. Detailed information regarding health- and safety risks and precautions for the use of this product is specified in the product's Safety Data Sheet. First-aid measures, refer to section 4. Handling and storage, refer to section 7. Transport information, refer to section 14. Regulatory information, refer to section 15.
Disclaimer The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and practical experience. Jotun's products are considered as semi-finished goods and as such, products are often used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves the right to change the given data without further notice. Users should always consult Jotun for specific guidance on the general suitability of this product for their needs and specific application practices. If there is any inconsistency between different language issues of this document, the English (United Kingdom) version will prevail.
Date of issue:
07.05.2014.
by Jotun Group
Page: 3/3
This Technical Data Sheet supersedes those previously issued.
The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com.
