Grundfos CR 3 2 A FGJ A e Hqqe

GRUNDFOS DATA BOOKLET
CR3-2 A-FGJ-A-E-HQQE 3x230/400 50HZ

Grundfos Pump 96516649
Thank you for your interest in our products

Please contact us for more information, or visit our website
http://www.lenntech.com/grundfos/CRFAM/96516649/CR-3-2-A-FGJ-A-E-HQQE.html
[email protected]
tel. +31-15-261.09.00
fax. +31-15-261.62.89
BE > THINK > INNOVATE
Company name:
Created by:
Phone:
Fax:
Date:
Position
Lenntech BV - lenntech.com
[email protected]
+31 15 2610900
+31 15 2616289
-
Qty. Description
1
CR 3-2 A-FGJ-A-E-HQQE
Note! Product picture may differ from actual product
Product No.: 96516649

Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)
enabling installation in a horizontal one-pipe system. The pump head and base are in cast iron all
other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling
and easy service and access. Power transmission is via a split coupling. Pipework connection is via
combined DIN-ANSI-JIS flanges.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
Further product details

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical
field around the products ensures deposition of paint particles as a thin, well-controlled layer on the
surface. An integral part of the process is a pretreatment. The entire process consists of these
elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor
stool by means of two coupling guards.
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump
head has a combined 1/2" priming plug and air vent screw.
Printed from Grundfos CAPS [2013.03.059]
1/8
Company name:
Created by:
Phone:
Fax:
Date:
[email protected]
+31 15 2610900
+31 15 2616289
-
The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This seal type is
assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing, this seal type is
suitable for high-pressure applications. The cartridge construction also protects the pump shaft from possible
wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
- Rotating seal ring material: Silicon carbide (SiC)
- Stationary seat material: Silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of
this material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless steel sheet. The chambers are provided with a
PTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,
and the shape of the blades ensure a high efficiency.
The base is made of cast iron. The flanges and base are cast in one piece. The discharge side of
the base has a combined drain plug and bypass valve. The pump is secured to the foundation by
four bolts through the base plate.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN
standards. The motor is flange-mounted with tapped-hole flange (FT).
Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor does not incorporate motor protection and must be connected to a motor-protective
circuit breaker which can be manually reset. The motor-protective circuit breaker must be set
according to the rated current of the motor (I1/1).
The motor can be connected to a variable speed drive for adjustment of pump performance to any
duty point. Grundfos CUE offers a range of variable speed drives. Please find more information in
Win-/WebCAPS.
Technical data
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Water
253 .. 393 K
293 K
2/8
Company name:
Created by:
Phone:
Fax:
Date:
Position
[email protected]
+31 15 2610900
+31 15 2616289
-
Qty. Description
Density:
998.2 kg/m
Technical:
Speed for pump data:
Rated flow:
Rated head:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
2873 rpm
3 m/h
9.6 m
HQQE
CE,TR
ISO 9906:1999 Annex A
Materials:
Pump housing:
Impeller:
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 313 K
Max pressure at stated temp:
25 bar / 120 C
25 bar / -20 C
Flange standard:
DIN
Pipe connection:
DN 25 / DN 32
Pressure stage:
PN 16 / PN 25
Flange size for motor:
FT85
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Motor efficiency at 3/4 load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
71A
NA
2
0.37 kW
0.37 kW
0.37 kW
50 Hz
3 x 220-240 D/380-415 Y V
1,74/1,00 A
490-530 %
0,80-0,70
2850-2880 rpm
78,5%
78,5 %
79,0-76,5 %
75,5-71,5 %
55 (Protect. water jets/dust)
F
Others:
Minimum efficiency index, MEI : 0.7
Net weight:
22.7 kg
Gross weight:
25.4 kg
Shipping volume:
0.05 m3
3/8
Company name:
Created by:
Phone:
Fax:
Date:
[email protected]
+31 15 2610900
+31 15 2616289
-
96516649 CR 3-2 50 Hz
H
[m]
CR 3-2, 3*400 V, 50Hz
eta
[%]
Pumped liquid = Water

Liquid temperature = 293 K
Density = 998.2 kg/m
14
13
12
11
10
9
90
80
70
60
50
40
30
20
10
0
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4
Q [m/h]
P
[W]
NPSH
[m]
250
5
P1
200
150
P2
100
50
4/8
Company name:
Created by:
Phone:
Fax:
Date:
2.5
3.0
3.5
4.0
Q [m/h]
P1
NPSH
[m]
4
P2
100
35
19 x 24.5
G 1/2
109
100
141
L3
LOW VOLTAGE
DIRECTION OF ROTATION
L1 L2
L1 L2
L3
HIGH VOLTAGE
98.3169
Water
253 .. 393 K
293 K
998.2 kg/m
191
Liquid:
Pumped liquid:
Liquid temperature range:
Liquid temp:
Density:
279
Flange standard:
Connect code:
Pipe connection:
Pressure stage:
Flange size for motor:
Mains frequency:
Rated voltage:
Rated current:
Starting current:
Cos phi - power factor:
Rated speed:
Efficiency:
Motor efficiency at full load:
Enclosure class (IEC 34-5):
Insulation class (IEC 85):
Motor protec:
2.0
200
Cast iron
EN-JL1030
ASTM A48-30 B
Stainless steel
DIN W.-Nr. 1.4301
AISI 304
A
E
313 K
25 bar / 120 C
25 bar / -20 C
DIN
FGJ
DN 25 / DN 32
PN 16 / PN 25
FT85
Electrical data:
Motor type:
IE Efficiency class:
Number of poles:
Rated power - P2:
Power (P2) required by pump:
1.5
75
Installation:
Maximum ambient temperature:
Max pressure at stated temp:
1.0
20
Material code:
Code for rubber:
0.5
89
Impeller:
0
P
[W]
100
Materials:
Pump housing:
90
80
70
60
50
40
30
20
10
0
220
2873 rpm
3 m/h
9.6 m
13.5 m
2
HQQE
CE,TR
ISO 9906:1999 Annex A
CR 3
3
A
A
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
250
Technical:
Speed for pump data:
Rated flow:
Rated head:
Head max:
Impellers:
Shaft seal:
Approvals on nameplate:
Curve tolerance:
Pump type:
Stages:
Pump version:
Model:
eta
[%]
4 x 13.5
CR 3-2 A-FGJ-A-E-HQQE
96516649
5700396747217
CR 3-2, 3*400 V, 50Hz

Pumped liquid = Water
Liquid temperature = 293 K
Density = 998.2 kg/m
180
Product name:
Product No:
EAN number:
H
[m]
141
Value
140
Description
[email protected]
+31 15 2610900
+31 15 2616289
-
71A
NA
2
0.37 kW
0.37 kW
0.37 kW
50 Hz
3 x 220-240 D/380-415 Y V
1,74/1,00 A
490-530 %
0,80-0,70
2850-2880 rpm
78,5%
78,5 %
79,0-76,5 %
75,5-71,5 %
55 (Protect. water jets/dust)
F
NONE
5/8
Company name:
Created by:
Phone:
Fax:
Date:
Description
Value
Motor No:
85805102
Others:
Minimum efficiency index, MEI :
Net weight:
Gross weight:
Shipping volume:
0.7
22.7 kg
25.4 kg
0.05 m3
[email protected]
+31 15 2610900
+31 15 2616289
-
6/8
Company name:
Created by:
Phone:
Fax:
Date:
[email protected]
+31 15 2610900
+31 15 2616289
-
96516649 CR 3-2 50 Hz
109
279
191
141
G 1/2
140
100
20
75
89
19 x 24.5
35
100
141
180
250
220
4 x 13.5
Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.
7/8
Company name:
Created by:
Phone:
Fax:
Date:
[email protected]
+31 15 2610900
+31 15 2616289
-
96516649 CR 3-2 50 Hz
L1 L2
L3
HIGH VOLTAGE
98.3169
L1 L2
L3
LOW VOLTAGE
Note! All units are in [mm] unless others are stated.
8/8
Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]
www.lenntech.com
tel. +31-15-261.09.00
fax. +31-15-261.62.89

Grundfos CR 3 2 A FGJ A e Hqqe

Uploaded by

Copyright:

Available Formats

Grundfos CR 3 2 A FGJ A e Hqqe

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Grundfos CR 3 2 A FGJ A e Hqqe

Uploaded by

Copyright:

Available Formats

GRUNDFOS DATA BOOKLET

CR3-2 A-FGJ-A-E-HQQE 3x230/400 50HZ

Thank you for your interest in our products

BE > THINK > INNOVATE

Note! Product picture may differ from actual product

Product No.: 96516649

Further product details

Printed from Grundfos CAPS [2013.03.059]

The shaft seal is screwed into the pump head.

Printed from Grundfos CAPS [2013.03.059]

Printed from Grundfos CAPS [2013.03.059]

CR 3-2, 3*400 V, 50Hz

Pumped liquid = Water

Printed from Grundfos CAPS [2013.03.059]

CR 3-2, 3*400 V, 50Hz

Printed from Grundfos CAPS [2013.03.059]

Printed from Grundfos CAPS [2013.03.059]

Note! All units are in [mm] unless others are stated.

Printed from Grundfos CAPS [2013.03.059]

Note! All units are in [mm] unless others are stated.

Printed from Grundfos CAPS [2013.03.059]

You might also like