Cable Tray

KSALCT-14

KwikSplice
aluminum
cable tray system

General Information
For over 50 years, Eatons B-Line Business has been a leader in cable management systems. Today, B-Line has state of
the art manufacturing facilities to support our customers around the globe. Our knowledgeable customer service, sales
and sales engineering team, we are positioned to support cable management requirements from small to large scale
commercial, industrial, and data center applications.

Eatons B-Line Business

Manufacturing Locations

H
H

United
States

South Korea

Canada
Kingdom of
Saudi Arabia

Malaysia

For more information, visit www.bline.com or contact us at www.cooperbline.com/contactus.

B-Line cable trays conform to the

requirements of IEC Standard
61537, 2001 Ed.

Important notice: No warranty, either expressed or implied, is made as to either its applicability to or its compatibility with
specific requirements of this information, nor for damages consequential to its use. All design characteristics,
specifications, tolerances and similar information are subject to change without notice.

NOTICE
B-Line reserves the right to change the specifications, materials, equipment, prices or the availability of products at any time without
prior notice. While every effort has been made to assure the accuracy of information contained in this catalog at the time of
publication, B-Line is not responsible for inaccuracies resulting from undetected errors or omissions.

KwikSplice Aluminum Cable Tray

KwikSplice - Table of Contents

General Information
Table Of Contents

..........................................................

...........................................................

i
1

KwikSplice Straight Sections

NEMA Class 12A (KSA4A & KSA5A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
NEMA Class 12B (KSB4A, KSB5A & KSB6A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7

Straight Sections

KwikSplice Accessories
Splice Plates (Standard, Expansion, Step Down, Vertical Adjustable,
Horizontal Adjustable, Tray-To-Box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Offset Reducing Splice Plates, Bonding Jumpers, Grounding Clamp,
Conduit To Trap Adaptor,Guide-Rite Conduit To Tray Adaptor,
Vertical Conduit Hanger Adaptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Drop-Out, Side Rail Drop-Out, Clamp/Guide, Frame Type
Box Connector, Blind End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Trapeze Support Kits & Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Underfloor Support, Heavy Duty Hold Down Bracket, Under Rung
Fastener Attachment, Rooftop Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
KwikSplice Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
KwikSplice Cover Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Cable Cleat Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Universal Fitting & Corner Post . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Barrier Strip Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Barrier Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
How To Miter Straight Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cable Data Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Accessories

KwikSplice Specification

Specification

..................................................

20 - 21

KwikSplice Fittings
Numbering System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Horizontal Bends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - 24
Horizontal Tee & Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Reducers (Left, Straight, Right) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Horizontal Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Horizontal Expanding Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Horizontal Expanding/Reducing Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Vertical Bends (VO & VI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-33
Vertical Tee Up/Down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

KwikSplice Aluminum Cable Tray

Fittings

KwikSplice Aluminum Cable Tray

Straight Sections - see pages 4-7
Covers - see page 14

KwikSplice Aluminum Cable Tray

KwikSplice Aluminum Cable Tray

Fittings - see pages 22-34

Accessories - see pages 8-17

KwikSplice Aluminum Cable Tray

KwikSplice - Straight Sections

KSA4A and KSA5A Straight Sections
Straight Sections

Straight Section Part Numbering

Prefix
Example: KS A 4 A 09 - 12 - 144

Series

NEMA Class

Height

Material

Type

Width

KS

A = 50 Lbs/Ft
NEMA 12A
(12 ft. span)

4 = 4
5 = 5

A = Aluminum

Ladder06 = 6" rung spacing

09 = 9" rung spacing
12 = 12" rung spacing

06 = 6"
09 = 9"
12 = 12"
18 = 18"
24 = 24"
30 = 30"
36 = 36"

Rung
Spacing

Trough04 = 4 rung spacing

SB = Solid Bottom

Width
(Inside)

Length

144
120

= 12 ft.
= 10 ft.

Primary

Secondary

Overall Width
(Width + 11/2)

Values are based on simple beam tests per VE-1 on 36" wide cable tray with rungs spaced on 12" centers. The published load safety factor
is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the
deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the tray.

Ladder Type
(Specify Rung Spacing)

Solid Bottom

4 Rung Spacing

Splices included with straight sections

KwikSplice Aluminum Cable Tray

KwikSplice - Straight Sections

KSA4A and KSA5A
Straight Section Technical Data

1.36

KSA4A

2.97

3.86

B-Line Series
Side Rail Dimensions
1.36

KSA5A

4.86

3.97

NEMA, CSA & UL

Classifications

Span

Load

ft

lbs/ft

Deflection
Multiplier

NEMA: 12A

221

0.0016

CSA: C-3m

124

0.0051

UL Cross-Sectional

10

79

0.0126

Area: 0.60 in2

12

55

0.0261

NEMA, CSA & UL

Classifications

Span

Load

ft

lbs/ft

Deflection
Multiplier

NEMA: 12A

219

0.0009

CSA: C-3m

123

0.0030

UL Cross-Sectional

10

79

0.0073

Area: 0.60 in2

12

55

0.0151

Design Factors
for Two Rails
Area = 0.80 in2
Sx = 0.90 in3
Ix = 1.79

in4

Design Factors
for Two Rails
Area = 0.92 in2
Sx = 1.24 in3
Ix = 3.08

in4

Span

Load

meters

kg/m

Deflection
Multiplier

1.8

328

0.028

2.4

185

0.088

3.0

125

0.215

3.7

82

0.445

Span

Load

meters

kg/m

Deflection
Multiplier

1.8

326

0.016

2.4

183

0.051

3.0

120

0.125

3.7

81

0.259

When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%.
Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

KwikSplice Aluminum Cable Tray

Design Factors
for Two Rails
Area = 5.16 cm2
Sx = 14.75 cm3
Ix = 74.51 cm4

Design Factors
for Two Rails
Area = 5.94 cm2
Sx = 20.32 cm3
Ix = 128.20 cm4

Straight Sections

B-Line Series
Side Rail Dimensions

KwikSplice - Straight Sections

KSB4A, KSB5A, and KSB6A Straight Sections
Straight Sections

Straight Section Part Numbering

Prefix
Example: KS B 4 A 09 - 12 - 144

Series

NEMA Class

Height

Material

Type

Width

KS

B = 75 Lbs/Ft
NEMA 12B
(12 ft. span)

4 = 4
5 = 5
6 = 6

A = Aluminum

Ladder06 = 6" rung spacing

09 = 9" rung spacing
12 = 12" rung spacing

06 = 6"
09 = 9"
12 = 12"
18 = 18"
24 = 24"
30 = 30"
36 = 36"

Rung
Spacing

Trough04 = 4 rung spacing

SB = Solid Bottom

Width
(Inside)

Length

144
120

= 12 ft.
= 10 ft.

Primary

Secondary

Overall Width
(Width + 11/2)

Values are based on simple beam tests per VE-1 on 36" wide cable tray with rungs spaced on 12" centers. The published load safety factor
is 1.5. To convert 1.5 safety factor to 2.0, multiply the published load by 0.75. To obtain mid-span deflection, multiply a load by the
deflection multiplier. Cable tray must be supported on spans shorter than or equal to the length of the tray.

Ladder Type
(Specify Rung Spacing)

Solid Bottom

4 Rung Spacing

Splices included with straight sections

KwikSplice Aluminum Cable Tray

KwikSplice - Straight Sections

KSB4A, KSB5A and KSB6A
Straight Section Technical Data

1.36

KSB4A

NEMA: 12B
2.95

3.88

NEMA, CSA & UL

Classifications

CSA: D-3m
UL Cross-Sectional

Span

Load

Design Factors
for Two Rails

Load

lbs/ft

Deflection
Multiplier

Span

ft

meters

kg/m

Deflection
Multiplier

Design Factors
for Two Rails

198

0.0040

Area = 0.99 in2

2.4

295

0.068

Area = 6.39 cm2

10

127

0.0097

Sx = 1.07 in3

3.0

195

0.166

Sx = 17.53 cm3

in4

3.7

131

0.343

Ix = 96.57 cm4

12

88

0.0201

Ix = 2.32

Span

Load

Design Factors
for Two Rails

Load

lbs/ft

Deflection
Multiplier

Span

ft

meters

kg/m

Deflection
Multiplier

Design Factors
for Two Rails

188

0.0023

Area = 1.12 in2

2.4

279

0.040

Area = 7.23 cm2

10

120

0.0057

Sx = 1.47 in3

3.0

180

0.097

Sx = 24.09 cm3

in4

3.7

124

0.201

Ix = 164.83 cm4

Area: 0.60 in2

B-Line Series
Side Rail Dimensions
1.36

KSB5A

NEMA: 12B
3.95

4.88

NEMA, CSA & UL

Classifications

CSA: D-3m
UL Cross-Sectional

12

83

0.0118

Ix = 3.96

Span

Load

Design Factors
for Two Rails

Load

lbs/ft

Deflection
Multiplier

Span

ft

meters

kg/m

Deflection
Multiplier

Design Factors
for Two Rails

179

0.0015

Area = 1.25 in2

2.4

266

0.026

Area = 8.06 cm2

10

114

0.0037

Sx = 1.91 in3

3.0

179

0.062

Sx = 31.30 cm3

0.0076

in4

3.7

118

0.129

Ix = 256.40 cm4

Area: 0.60 in2

B-Line Series
Side Rail Dimensions
1.36

KSB6A

5.88

NEMA, CSA & UL

Classifications
NEMA: 12B

4.95

CSA: D-3m
UL Cross-Sectional

12

79

Ix = 6.16

Area: 1.00 in2

When cable trays are used in continuous spans, the deflection of the cable tray is reduced by as much as 50%.
Design factors: Ix = Moment of Inertia, Sx = Section Modulus.

KwikSplice Aluminum Cable Tray

Straight Sections

B-Line Series
Side Rail Dimensions

KwikSplice - Accessories
Standard Splice Plates
Furnished in pairs with 1/4" hardware.
UL Classified.
One pair including hardware provided with
each straight section.

Tray
Series

Catalog No.

KS_4A
KS_5A
KS_6A

KS4A-SSP
KS5A-SSP
KS6A-SSP

_ Can be used with both NEMA Class A and B KwikSplice trays.

Expansion Splice Plates

Accessories

Furnished in pairs with 1/4" hardware.

Bonding jumper required.

Tray
Series

Catalog No.

KS_4A
KS_5A
KS_6A

KS4A-ESP
KS5A-ESP
KS6A-ESP

Tray
Series

Catalog No.

KS_5A to KS_4A
KS_6A to KS_4A
KS_6A to KS_5A

KSA-DSP-45
KSA-DSP-46
KSA-DSP-56

Tray
Series

Catalog No.

KS_4A
KS_5A
KS_6A

KS4A-VSP
KS5A-VSP
KS6A-VSP

Tray
Series

Catalog No.

KS_4A
KS_5A
KS_6A

KS4A-FSP
KS5A-FSP
KS6A-FSP

Tray
Series

Catalog No.

KS_4A
KS_5A
KS_6A

KS4A-TTB
KS5A-TTB
KS6A-TTB

Step Down Splice Plates

Furnished in pairs with 1/4" hardware.
UL Classified.

Vertical Adjustable Splice Plates

Furnished in pairs with 1/4" hardware.
UL Classified.

Requires supports within 24 on

both sides, per NEMA VE 2.

Horiztonal Adjustable
Splice Plates

Furnished in pairs with 1/4" hardware.

Horizontally adjustable to 90.
Vertically adjustable to 15.
UL Classified.
For optional rung, see page 18.
Requires supports within
24 on both sides, per NEMA VE 2.

Tray To Box Splice Plates

Furnished in pairs with 1/4" hardware.
UL Classified.

KwikSplice Aluminum Cable Tray

KwikSplice - Accessories
Offset Reducing Splice Plates
Furnished in pairs with 1/4" hardware.
UL Classified.
Specify the following:

C = center reducer
S = side reducer

r (tray reduction) 3, 6, 9, 12,

15, 18, 21, 24, 27, or 30

Tray
Series

Catalog No.

KS_4A
KS_5A
KS_6A

KS4A-RSP-r
KS5A-RSP-r
KS6A-RSP-r

Center Reducer
Right (or Left)
Reducer

_ Can be used with both NEMA Class A and B KwikSplice trays.

Bonding Jumper
Furnished with 1/4" hardware.
UL Classified.

Catalog No.

1200

99-30

Grounding Clamp
Accepts #6 AWG to 250 MCM.
UL Classified as to its suitability as
an equipment grounding conductor.

Conduit to Tray
Adaptors

Material

Catalog No.

Tin Plated Aluminum

9A-2130

Conduit Size

Catalog No.

in.

(mm)

1/2, 3/4
1, 11/4

(15, 20)
(25, 32)
(40, 50)
(65, 80)
(90, 100)

9G-1158-1/2, 3/4
9G-1158-1, 11/4
9G-1158-11/2, 2
9G-1158-21/2, 3
9G-1158-31/2, 4

Conduit Size

Catalog No.

11/2, 2
21/2, 3
31/2, 4

Guide-Rite Conduit to Tray Adaptor

Assemblies support 1/2", 3/4", & 1 conduit.
Attaches to top or bottom of I-Beam
side rail flange.

Static Load
Capacity

Patent #4958792

in.

(mm)

1/2, 3/4

(15, 20)
(25)

BG-8-12-W2
BG-16-W2

50 Lbs.

Vertical Conduit Hanger Adapter

Furnished as one plate with fastener attachments.
Utilizes (2) BAX-4-16 Under Rung Fastener Attachments.
Accepts 1/2 to 4 conduit.

Conduit Size
in.

(mm)

1/2
3/4

(15)
(20)
(25)
(32)
(40)
(50)
(75)
(100)

1
11/4
11/2
2
3
4

KwikSplice Aluminum Cable Tray

Catalog No.
KSA-VCH-1/2
KSA-VCH-3/4
KSA-VCH-1
KSA-VCH-11/4
KSA-VCH-11/2
KSA-VCH-2
KSA-VCH-3
KSA-VCH-4

Accessories

Ampacity

KwikSplice - Accessories
Drop-Out
Snaps on to cable tray rung.
Provides 4 (101mm) radius.
Holes provided to secure cables.

Catalog No.
KSA-OUT-
= Insert tray width

Accessories

Side Rail Drop-Out

Snaps on to cable tray side rail.
Provides 4 (101mm) radius.
Holes provided to secure cables.

Catalog No.
KSA-SDO-06
KSA-SDO-12
KSA-SDO-18

Length
in.

(mm)

6
12
18

(152)
(305)
(457)

Clamp/Guide
Features a no-twist design.
Each side is labeled to ensure
proper installation.
Designed for 1/4 hardware.
Furnished in pairs with or without
hardware.

1.5
Patent No.
RE35479

(38mm)

Catalog No.
9ZN-1204 (without hardware)
9ZN-1204NB (with hardware)

Frame Type Box Connector

Furnished with 1/4" hardware for tray connection.

Tray
Series

Catalog No.

KS_4A
KS_5A
KS_6A

KS4A-FTB-
KS5A-FTB-
KS6A-FTB-

= tray width

Blind End
Furnished as one plate with 1/4" hardware.

Tray
Series

Catalog No.

KS_4A
KS_5A
KS_6A

KS4A-END-
KS5A-END-
KS6A-END-

= tray width

_ Can be used with both NEMA Class A and B Kwik Splice trays.

10

KwikSplice Aluminum Cable Tray

KwikSplice - Accessories
Tab & Lock Trapeze Support

Hardware purchased separately.

Accepts up to 3/8 rod.
Accepts traditional hold down clamps (9ZN-1204) if necessary.
Ability to adjust tabs with flat head screw driver (not included).
Tabs clamp cable tray to trapeze support.
Load capacity: Rated for maximum load of KwikSplice cable tray system.
Corrosion resistant pre-galvanized zinc finish.
Other finishes available upon request.
Trapeze Support Shown
With Buzznut Hardware
Trapeze Support Only

Qty.

Catalog No

(4)

B201

Standard Hardware
Standard

3/8

(4)

Catalog No.

HN

KSA-6CT
KSA-9CT
KSA-12CT
KSA-18CT
KSA-24CT
KSA-30CT
KSA-36CT

or
Buzznut

(4)

Tray Width

SLWN3/8
Buzznut Hardware

in.

(mm)

6
9
12
18
24
30
36

(152)
(229)
(305)
(457)
(610)
(762)
(914)

Trapeze Support Kit

B-Line trapeze kits provide the components
required for a single trapeze support in one
package. These kits are available in pregalvanized steel with zinc-plated hardware
or hot dip galvanized steel with 316
(2) 1/2" x 7/8" Hex
stainless steel hardware.

Catalog
No.

Head Cap Screw

The SH channel provides the

convenience of pre-punched slots,
which eliminate the need for field
drilling.
The illustrated hardware is
sealed in a plastic bag and
boxed with the channel, which
is pre-cut to the appropriate
length as shown in the chart.

(2) 9ZN-1205
Hold-Down
Guide Clamp
(4) 1/2" Hex Nut
(2) N525WO
Channel Nut

(4) B202
Square Washer
(1) B22 Channel
cut to the
required length

Designed for use with 1/2" threaded rod.

Order rod separately.

Tray
Width

Channel
Length
(mm)

Uniform
Load

in.

(mm)

in.

9P-5506-22SH()

(152)

16 (406)

1600 (7.11)

lbs

(kN)

9P-5509-22SH()

(229)

18 (457)

1250 (5.56)

9P-5512-22SH()

12 (305)

22 (559)

1125 (5.00)

9P-5518-22SH()

18 (457)

28 (711)

865 (3.85)

9P-5524-22SH()

24 (610)

34 (864)

700 (3.11)

9P-5530-22SH()

30 (762)

40 (1016)

590 (2.62)

9P-5536-22SH()

36 (914)

46 (1168)

510 (2.27)

() Insert 3/8 for 3/8" threaded rod hardware.

Safety factor of 3.0 on all loads.

Trapeze
Hardware
Kit

Catalog No.
In plastic bag

KwikSplice Aluminum Cable Tray

11

9ZN-5500-1/2
1
2
2
4
4

pr. 9ZN-1205
HHC Screw 1/2 x 7/8 ZN
N525 WO ZN
B202 ZN 1/2" sq washer
HN 1/2 ZN

9G-5500-1/2
1
2
2
4
4

pr. 9G-1205
HHC Screw 1/2 x 7/8 SS6
N525 WO SS6
B202 HDG 1/2" sq washer
HN 1/2 SS6

Accessories

Hardware

KwikSplice - Accessories
Bracket (12-24)
Finishes available:
ZN, GRN, or HDG
Safety Load Factor 2.5
A

Catalog
No.

Accessories

B494-12
B494-18
B494-24

Uniform Load
lbs

(kN)

1580 (7.02)
1000 (4.45)
996 (4.43)

Tray Width
in.

(mm)

'A'
in.

(mm)

6 & 9 (152 & 229) 12

12
(305)
18
18
(457)
24

(305)
(457)
(610)

Bracket (30-42)
Finishes available:
ZN, GRN, or HDG
Safety Load Factor 2.5
A

Catalog
No.
B494-30
B494-36
B494-42

Uniform Load

Tray Width

'A'

lbs

(kN)

in.

(mm)

in.

(mm)

924
864
580

(4.11)
(3.84)
(2.58)

24
30
36

(610)
(762)
(914)

30 (762)
36 (914)
42 (1067)

Cantilever Bracket (12-24)

Finishes available:
ZN, GRN, HDG, SS4 or SS6
Safety Load Factor 2.5
A

Catalog
No.
B409-12
B409-18
B409-24

Uniform Load
lbs

(kN)

960
640
480

(4.27)
(2.84)
(2.13)

Tray Width
in.

(mm)

'A'
in.

(mm)

6 & 9 (152 & 229) 12

12
(305)
18
18
(457)
24

(305)
(457)
(610)

Cantilever Bracket (12-42)

Finishes available:
ZN, GRN, HDG, or SS4
Safety Load Factor 2.5

Catalog
No.
A

B297-12
B297-18
B297-24
B297-30
B297-36
B297-42

12

Uniform Load
lbs

(kN)

1660
1100
835
665
550
465

(7.38)
(4.89)
(3.71)
(2.95)
(2.44)
(2.06)

Tray Width
in.

(mm)

6 & 9 (152 & 229)

12
(305)
18
(457)
24
(610)
30
(762)
36
(914)

'A'
in.

(mm)

12 (305)
18 (457)
24 (610)
30 (762)
36 (914)
42 (1067)

KwikSplice Aluminum Cable Tray

KwikSplice - Accessories
Underfloor Support (U-Bolts not included)
Finish available: ZN
Safety Load Factor 2.5

U-Bolt Size

in.

B501- /
B501-1
B501-11/4
B501-11/2
B501-2
B501-21/2
3 4

Fits Pipe O.D.

.841 - 1.050
1.051 - 1.315
1.316 - 1.660
1.661 - 1.900
1.901 - 2.375
2.376 - 2.875

(mm)

(21
(27
(33
(42
(48
(60

26)
33)
42)
48)
60)
73)

Catalog No. Uniform Load

(kN)

800
450

(3.55)
(2.00)

Tray Width
in.

'A'

(mm)

in.

6 & 9 (152 & 229)

12 & 18 (305 & 457)

(mm)

12 (305)
21 (533)

Heavy Duty Hold

Down Bracket

Design load is 2000 lbs/pair.

Two bolt design.
Sold in pairs.
3/8" cable tray attachment hardware provided.
1/2" support attachment hardware not provided.
(*) Insert ZN, SS4, or SS6

Catalog No.
9(*)-1241

Under Rung Fastener Attachment

Supports electrical fixtures from bottom of rung or siderails.

Wing nut included.
Various 1/4"-20 stud lengths available.
Static Load Capacity: 75 Lbs. (34kg).

Catalog No.
BAX-4-16
BAX-4-16-24
BAX-4-16-32
BAX-4-16-48

DURA-BLOK Support Bases

with B22 Channel

Catalog No.
DB10-28
DB10-36
DB10-42
DB10-50
DB10-60

LEEDS credit available, base made from 100% recycled material.

KwikSplice Aluminum Cable Tray

13

in.

(mm)

5/8

(16)

11/2 (38)
2 (51)
3 (76)

Height x Width x Length

in.

Designed as a superior rooftop support for cable tray,

UV resistant and approved for most
roofing material or other flat surfaces.
Can be used with any of B-Line cable tray
clamps and guides.
Ultimate Load Capacity:
1,000 lbs. (uniform load)

Stud
Length

(mm)

55/8 x 6 x 28 (143 x 152 x 711)

55/8 x 6 x 36 (143 x 152 x 914)
55/8 x 6 x 42 (143 x 152 x 1067)
55/8 x 6 x 50 (143 x 152 x 1270)
55/8 x 6 x 60 (143 x 152 x 1524)

General Note: Consult roofing manufacturer or engineer for roof load

capacity. The weakest point may be the insulation board beneath
the rubber membrane.

Accessories

B409UF-12
B409UF-21

Order 2 properly sized U-Bolts (sold separately)

for each underfloor support.

lbs

KwikSplice - Accessories
Covers for KSA4A, KSA5A, KSB4A, KSB5A, and KSB6A

Accessories

Solid Non-Flanged

Ventilated Flanged

Solid Flanged

A full range of covers are available for straight sections and fittings.
Solid covers should be used when maximum enclosure of the cable is desired and no accumulation of heat is expected.
Ventilated covers provide cable protection, while allowing heat to escape.
Flanged covers have a 1/2 in. (13 mm) flange. Cover clamps are not included with the cover and must be ordered separately.
B-Line recommends that covers be placed on vertical cable tray runs to a height of 6 ft. (1.83 m) to 8 ft. (2.44 m) above the floor
to isolate both cables and protect personnel.

Aluminum Cover Part Numbering

Prefix
Example: 80 7 A - 24 - 144

Cover Type

Detail

Material

Tray Width

Item Description

80 = Solid
81 = Ventilated

6 = Non-Flanged

A = Aluminum

06 = 6"
09 = 9"
12 = 12"
18 = 18"
24 = 24"
30 = 30"
36 = 36"

For Straight Section Cover:

144 = 12 ft. (3.66 m)
120 = 10 ft. (3.05 m)
72 = 6 ft. (1.83 m)
60 = 5 ft. (1.52 m)
For fitting covers: Insert suffix of
fitting to be covered.
See example below.

(80 & 81 type only)

7 = Flange

Examples of Catalog Numbers for Fitting Covers:

Horizontal Bend Cover
Prefix
Suffix
80 7 A - 18 - 90 HB 24
Radius
Fitting
Angle
Width
Material
Detail
Cover Type

Vertical Bend Cover

Prefix
Suffix
80 7 A - 24 - 90 VO 24 - 4*
Side Rail*
Height
Radius
Fitting
Angle
Width
Material
Detail
Cover Type
* Required for VO fittings only

14

KwikSplice Aluminum Cable Tray

KwikSplice - Accessories
Standard Cover Clamp
For indoor service only.
Setscrew included.
Sold per piece.

Tray
Type

Side Rail
Height

KS Series

All Sizes

Catalog No.
9ZN-9012
9A-9012

Heavy Duty Cover Clamp

Recommended for outdoor service.

in.

(mm)

4
5
6

101
127
152

Catalog
No.
KS4A-HDCC-()
KS5A-HDCC-()
KS6A-HDCC-()

() Insert tray width

Cover Joint Strip

Quantity of Standard
Cover Clamps Required
Straight Section 60" or 72" ...............4
Straight Section 120" or 144" ...........6
Horizontal/Vertical Bends .................4
Tees .................................................6
Crosses ............................................8

Used to join covers

Plastic
() Insert tray width

pcs.
pcs.
pcs.
pcs.
pcs.

Catalog No.
Note: When using the Heavy Duty Cover
Clamp, only one-half the number of clamps
stated above is required.

99-9980-()

Cable Cleats
(see Cable Tray Systems catalog)

Trefoil
Cable
Cleats

Single
Cable
Cleats

KwikSplice Aluminum Cable Tray

15

Accessories

Side Rail
Height

KwikSplice - Accessories
Universal Fitting

Aluminum construction.
2" smooth radius.
UL Classified.
Shipped as a 90 horizontal bend.
Field modify to create a tee or cross.
Includes four pairs of toolless hinge splice plates.
Patent Pending.

Accessories

Solid
Bottom

Tray
Series
KS_4A
KS_5A
KS_6A

Punched
Bottom

Catalog No.
Punched
Solid
KS4A-UF-()
KS5A-UF-()
KS6A-UF-()

KS4ASB-UF-()
KS5ASB-UF-()
KS6ASB-UF-()

() Insert Tray Width 6" (152mm) to 36 (914mm)

Corner Post For Universal Fitting

Use to create reducing fittings.

Furnished with hardware.
2" inside radius.
Used on punched bottom only.
UL Classified.
Patent Pending.

Universal Fitting Shown

as a Reducing Tee

Tray
Series

Catalog No.

KS_4A
KS_5A
KS_6A

KS4A-CP
KS5A-CP
KS6A-CP

= tray width

Barrier Strip Clip

Provides attachment to KwikSplice rung.

Allows for installed barrier adjustment.
Asymmetrical clip provides a wide range for screw location.
Barriers strip clips and hardware are included with all barriers.

Barrier
Flange
Rung

Screw slot for

sheet metal
screw

Catalog No.
9A-RBC

16

KwikSplice Aluminum Cable Tray

KwikSplice - Accessories
Straight Section Barrier Strip
Furnished with four (4) barrier strip clips,
mounting hardware and splice.
Standard lengths are 144" (12 ft) & 120" (10 ft).
Order catalog number based on loading depth H.

Tray
Series

in.

KS_4A

R4A-DSL-Length

(76)

KS_5A

R5A-DSL-Length

(101)

KS_6A

R6A-DSL-Length

(127)

Tray
Series

Catalog No.

in.

KS_4A

R4A-DHB

(76)

KS_5A

R5A-DHB

(101)

KS_6A

R6A-DHB

(127)

(mm)

Horizontal Bend Barrier Strip

Furnished with three (3) barrier strip clips,
mounting hardware and splice.
Standard length is 72" (6 ft).
Flexible to fit desired angles.
Order catalog number based on loading depth H.

H
(mm)

Vertical Bend Barrier Strip

Furnished with three (3) barrier strip clips,
mounting hardware and splice.

Inside Bend
(VI)

Tray
Series

Outside Bend
(VO)

Catalog No.
Inside Bend
Outside Bend

17

(mm)

KS_4A

R4A-DVI-(**)R()

R4A-DVO-(**)R()

(76)

KS_5A

R5A-DVI-(**)R()

R5A-DVO-(**)R()

(101)

KS_6A

R6A-DVI-(**)R()

R6A-DVO-(**)R()

(127)

(**) Insert 30, 45, 60, 90 for angles

() Insert 12, 24 for radius

KwikSplice Aluminum Cable Tray

H
in.

Accessories

H
Catalog No.

KwikSplice - Accessories
How to miter cut KwikSplice cable tray for use
with Horizontal Adjustable splice plates.

Accessories

Cut location

Count over
number of
inches
specified in
chart

Count over
number of
inches
specified in
chart

Cut location

KSA5A09-12-144 Straight Section shown with required side rail removed to form 90 fitting.
Example: For a 12" wide 90 bend, the cuts must be made 125/8 (320.7mm) from the end.

Mark desired hole/cut locations per chart.

Remove any rungs (if necessary) affected by cuts.
Cut side rails through center of required holes per chart.
Mount outside Horizontal Adjustable splice plate with
provided hardware and bend Kwik Splice sections to
desired angle.
Form inside Horizontal Adjustable splice plate to fit
contour of inner rails and bolt into place.
Reinstall (if necessary) appropriate rungs.
Torque to 18 ftlbs.
If Splice Rung Kit (see below) is required, order
separately.
Recommend adding one to the value in the chart if the
first hole is less than 3/8" from the end of tray.

Cut Length from Rail End For

Desired Angle
30
45
60

Tray
Width

90

in.

(mm)

in.

(mm)

in.

(mm)

in.

(mm)

(152)

15/8

(41.3)

31/8

(79.4)

31/8

(79.4)

61/4 (158.7)

(228)

31/8

(79.4)

31/8

(79.4)

43/4 (120.6)

93/8 (238.2)

12 (305)

31/8

(79.4)

43/4

(120.6)

61/4

(158.7)

125/8 (320.7)

18 (457)

43/4 (120.6)

77/8 (200.0)

11

(279.4)

171/4 (438.1)

24 (609)

61/4 (158.7)

93/8 (238.2)

141/8 (358.8)

235/8 (600.1)

30 (762)

77/8 (200.0)

125/8 (320.7)

171/4 (438.1)

297/8 (758.8)

36 (914)

93/8

153/4

203/8

361/8 (917.6)

(238.2)

(400.0)

(517.5)

in.

(mm)

Horizontal Adjustable Splice Rung Kit

Kit allows a support rung to be added to Horizontal Adjustable splice
plates so that cables may be supported through a bend.
The support rung is available in three lengths
and should be ordered based upon tray width.
The rung length is sized so that it will fit a maximum tray width
when Horizontal Adjustable splices are used to make a bend up to 90.
Once the Horizontal Adjustable splices are installed in the cable tray
system, the distance between the splice mounting surfaces should be
measured. Cut support rung to the measured distance and install using
the hardware included. Torque to 18 ftlbs.

Example:
Flex connectors are installed on an 18" (457mm) wide tray with approximately a 45 bend.
The correct support rung kit is 9A-RFM-24RK. The tray width is 24" or less and the angle is less than 90.

For Tray
Width
in.

Catalog No.

(mm)

Actual
Rung Length
in.

(mm)

6, 9, 12 (152, 228, 305)

9A-RFM-12RK

20 (508)

18, 24

(457, 609)

9A-RFM-24RK

37 (940)

30, 36

(762, 914)

9A-RFM-36RK

54 (1371)

18

KwikSplice Aluminum Cable Tray

KwikSplice - Accessories

Data Cables
The National Electrical Code allows for 50% fill of ventilated cable tray for control or signal wiring (Article 392-9(b)).
This rule requires that all the individual cable cross-sectional areas added up may not exceed one half the cable tray area.
The cable tray area is equal to the width times the load depth.
In actual practice with data cables, however, the cable tray becomes completely full in reaching the "50% cable fill".
The tray is completely full, but the sum of the cable areas is only 50% of the tray area, due to the empty spaces between the cables.

Accessories

Data Cable Fill and Weight Chart

Number of Category 5/5e/6 Cables and Calculated Cable Weight in Lbs/Ft

Tray
Depth
6"
in

mm

Cables

9"
lbs/ft

Tray
Width
18"

12"

24"

30"

36"

Cables

lbs/ft

Cables

lbs/ft

Cables

lbs/ft

Cables

lbs/ft

Cables

lbs/ft

Cables

lbs/ft

4 101

347

520

13

693

18

1040

27

1386

35

1733

43

2079

54

5 127

433

12

650

17

866

23

1299

34

1733

43

2166

53

2599

68

6 152

520

14

780

20

1040

27

1559

41

2079

52

2599

64

3119

81

This chart was based on 50% fill of 4 UTP Category 5, 5e, or 6 cables (O.D. = .21" .026 lbs/ft).
In the above loading grid, the weight of the cables is not the issue. The volume capacity of the tray
governs. For example, the worst case (6" load depth, 36" wide) has a total cable weight of 81 lbs/ft.

KwikSplice Aluminum Cable Tray

19

KwikSplice - Specifications
Section 161xx - KwikSplice Cable Tray
PART 1 GENERAL
Summary
A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment,
tests and services to install complete cable tray systems as shown on the drawings.
B. Cable tray systems are defined to include, but are not limited to straight sections of cable trays, fittings, drop-outs,
supports and accessories.

1.2

References
A. NEMA VE 1-2009 - Metal Cable Tray Systems.
B. NEMA VE 2-2013 - Cable Tray Installation Guidelines.
C. ANSI/NFPA 70 National Electrical Code

1.3

Drawings
A. The drawings, which constitute a part of these specifications, indicate the general route of the cable runway systems.
Data presented on these drawings is as accurate as preliminary surveys and planning can determine until final equipment
selection is made. Accuracy is not guaranteed and field verification of all dimensions, routing, etc., is required.
B. Specifications and drawings are for assistance and guidance, but exact routing, locations, distances and levels will be
governed by actual field conditions. Contractor is directed to make field surveys as part of his work prior to submitting
system layout drawings.

1.4

Quality Assurance
A. Manufacturers: Firms regularly engaged in manufacture of cable trays and fittings of types and capacities required,
whose products have been in satisfactory use in similar service for not less than 10 years.
B. NEMA Compliance: Comply with NEMA Standards Publication Number VE1, "Cable Tray Systems".
C. NEC Compliance: Comply with NEC, as applicable to construction and installation of cable tray and cable channel
systems (Article 392, NEC).
D. UL Compliance: Provide products that are UL-classified and labeled.
E. NFPA Compliance: Comply with NFPA 70B, "Recommended Practice for Electrical Equipment Maintenance" pertaining
to installation of cable tray systems.

1.5

Delivery, Storage and Handling

A. Deliver cable tray systems and components carefully to avoid breakage, denting and scoring finishes. Do not install
damaged equipment.
B. Store cable trays and accessories in original cartons and in clean dry space; protect from weather and construction traffic.
Wet materials should be unpacked and dried before storage.

1.6

Submittals
A. Shop Drawings: Indicate tray type, dimensions, support points, and finishes.
B. Product Data: Submit fittings and accessories.
C. Manufacturer's Installation Instructions: Submit application conditions and limitations of use stipulated by Product testing
agency specified under Regulatory Requirements. Include instructions for storage, handling, protection, examination,
preparation, and installation of Product.

Specification

1.1

PART 2 PRODUCTS
2.1

Acceptable Manufacturers
A. Manufacturer: Subject to compliance with these specifications, cable tray systems shall be as manufactured by
Eatons B-Line Business (formerly Cooper B-Line, Inc.).

2.2

Cable Tray Sections and Components

A. General: Except as otherwise indicated, provide metal cable trays, of types, classes, and sizes indicated; with splice
plates, bolts, nuts and washers for connecting units. Construct units with rounded edges and smooth surfaces; in
compliance with applicable standards; and with the following additional construction features. Cable tray shall be
installed according to the latest revision of NEMA VE-2.
B. Material and Finish: Straight section, fitting side rails, rungs and splice plates shall be extruded from Aluminum
Association Alloy 6063. All fabricated parts shall be made from Aluminum Association Alloy 5052.

2.3

Type of Tray System

A. Ladder Cable Trays shall consist of two longitudinal members (side rails) with transverse members (rungs) welded to
both side rails. Both side rails and rungs shall be I-beam configuration. Side rails shall have a splice retention groove to
accept a splice plate. Rungs shall be spaced [4] [6] [9] [12] inches on center. Rung spacing in radiused fittings shall be
industry standard 9 and measured at the center of the trays width.
(continued on page 21)

20

KwikSplice Aluminum Cable Tray

KwikSplice - Specifications
(continued from page 20)

B. Ventilated Bottom Cable Trays shall consist of two longitudinal members (side rails) with rungs spaced 4 on center.
C. Solid Bottom Cable Trays shall consist of two longitudinal members (side rails) with a solid sheet over rungs spaced on
12 centers.
D. Cable tray loading depth shall be [3] [4] [5] inches per NEMA VE-1.
E. Straight sections shall be supplied in standard [10 foot (3.05m)] [12 foot (3.65m)] lengths.
F. Cable tray widths shall be [6] [9] [12] [18] [24] [30] [36] inches or as shown on drawings.
G. Splice plates shall have a maximum of (2) two nuts and bolts per plate. The resistance of fixed splice connections
between adjacent sections of tray shall not exceed 0.00033 ohms. Splice plates shall be furnished with straight sections
and fittings. All horizontal fittings (horizontal bend, horizontal tee, horizontal cross) to be installed utilizing B-Line Kwik
Splice Universal Fitting. All vertical fittings must have a minimum radius of [12] [24] inches.
****** [OR] ******
All fittings must have a minimum radius of [12] [24] inches.
Loading Capacities
A. Cable trays shall meet NEMA class designation:
{NEMA 12A: [50 lbs./ft. on a 12 ft. span]} OR {NEMA 12B: [75 lbs./ft. on a 12 ft. span]}.
****** [OR] ******
B. Cable tray shall be capable of carrying a uniformly distributed load of _______ lbs./ft on a _______ foot support span
with a safety factor of 1.5 when supported as a simple span and tested per NEMA VE 1 Section 5.2.

2.5

Accessories
A. Covers:
1. Furnish only where indicated on the Drawings.
2. Solid or ventilated as indicated.
3. Same manufacturer and material as the tray.
4. Secure covers with manufacturers approved clamps.
5. Clamp spacing per manufacturers recommendations.
B. Dividers:
1. Manufactured by the cable tray manufacturer of the same material as the tray.
C. Mounting hardware:
1. Zinc coated tray bolts, nuts, and fasteners: quantity not to exceed two each per splice plate.
D. Trapeze Supports
1. Manufactured by the cable tray manufacturer.
E. Cable Exit Options
1. Radiused drop outs must be utilized for cables exiting the cable tray through the rungs or over either side rail
****** [OR] ******
2. Conduit connectors must be utilized to securely connect the conduit runs to the cable tray when a cable exits through
the rungs or over either side rail.

PART 3 EXECUTION
3.1

Installation
A. Install cable trays as indicated: Installation shall be in accordance with equipment manufacturer's instructions, and with
recognized industry practices to ensure that cable tray equipment comply with requirements of NEC and applicable
portions of NFPA 70B. Reference NEMA-VE2 for general cable tray installation guidelines.
B. Coordinate cable tray with other electrical work as necessary to properly integrate installation of cable tray work with
other work.
C. Provide sufficient space encompassing cable trays to permit access for installing and maintaining cables.
D. Cable tray fitting supports shall be located such that they meet the strength requirements of straight sections.
Install fitting supports per NEMA VE-2 guidelines, or in accordance with manufacturer's instructions.

3.2

Testing
A. Test cable trays to ensure electrical continuity of bonding and grounding connections, and to demonstrate compliance
with specified maximum grounding resistance. See NFPA 70B, Chapter 18, for testing and test methods.
B. Manufacturer shall provide test reports witnessed by an independent testing laboratory of the "worst case" loading
conditions outlined in this specification and performed in accordance with the latest revision of NEMA VE-1/CSA C22.2
No. 126. 1-09.
END OF SECTION

KwikSplice Aluminum Cable Tray

21

Specification

2.4

KwikSplice - Fittings
Fittings For KSA4A, KSA5A, KSB4A, KSB5A and KSB6A

Fittings engineered with 3 tangents

for splicing integrity.

Fitting Part Numbering

Prefix
Example: KS 4 A 09 - 12 - 90 HB 24

Series

Height

Material

Type

Width

Angle*

Fitting Type

Radius

KS =
KwikSplice

4 = 4
5 = 5
6 = 6

A = Aluminum

Ladder
09 =
9" rung spacing

06 = 6"
09 = 9"
12 = 12"
18 = 18"
24 = 24"
30 = 30"
36 = 36"

30 = 30
45 = 45
60 = 60
90 = 90

*HB = Horizontal Bend

HT = Horizontal Tee
HX = Horizontal Cross
*VI = Vertical Inside Bend
*VO = Vertical Outside Bend
VT = Vertical Tee, Down
VTU = Vertical Tee, Up
LR = Left Reducer
RR = Right Reducer
SR = Straight Reducer

12 = 12
24 = 24

Other
04 =
4 rung spacing
SB =
Solid Bottom

Fittings

Expanding & Reducing Horizontal Tee & Cross Fitting Part Numbering
Prefix
Example: KS 4 A 04 - 24 - 12 - HT 24

Series

Height

Material

Type

Width 1

Width 2

KS =
KwikSplice

4 = 4
5 = 5
6 = 6

A = Aluminum

Ladder
09 =
9" rung spacing

06 = 6"
09 = 9"
12 = 12"
18 = 18"
24 = 24"
30 = 30"
36 = 36"

06 = 6"
09 = 9"
12 = 12"
18 = 18"
24 = 24"
30 = 30"
36 = 36"

Other
04 =
4 rung spacing
SB =
Solid Bottom

Fitting Type

Radius

HT = Horizontal Tee

12 = 12
24 = 24

(Reducing - where Width 1

is larger than Width 2)
(Expanding - where Width 1
is smaller than Width 2)

HX = Horizontal Cross
(Reducing/Expanding - where Width 1
is larger than Width 2)

For ventilated or solid bottom, add 04 or SB as shown below: Available 6" thru 36"
Prefix

Prefix

KS5A04 - 24 - 90HB24

KS5ASB - 24 - 90HB24

4 Rung Spacing Bottom

22

Solid Bottom

KwikSplice Aluminum Cable Tray

KwikSplice - Fittings
Horizontal Bend 90 60 (HB)
1 pair splice plates with hardware included.

90 Horizontal Bend

Bottoms manufactured:

60 Horizontal Bend

90
HB

Ladder = 9" Rung Spacing

04 = 4" Rung Spacing
SB = Flat sheet over 9" Rung Spacing

60
HB

3"

3" (76)

Bend
Tray
Radius Width
R
in.

(mm)

12 (305)

90 Horizontal Bend
Dimensions
Catalog No.
A
B

in. (mm)

in.

18

(mm)

(457)

in.

(mm)

in.

(mm)

in.

(457)

(Pre)-06-60HB12

171/2

191/2 (495)

(Pre)-09-60HB12

1813/16 (478)

107/8 (276)

121/2 (318)

(457)

in.

(445)

101/8

(mm)

in.

(mm)

(257)

1111/16

(297)

(Pre)-06-90HB12

9 (228)

(Pre)-09-90HB12

12 (305)

(Pre)-12-90HB12

21

(533)

21

(533)

21

(533)

(Pre)-12-60HB12

201/16 (510)

115/8 (295)

133/8 (340)

18 (457)

(Pre)-18-90HB12

24

(610)

24

(610)

24

(610)

(Pre)-18-60HB12

2211/16 (576)

131/8 (333)

151/8 (384)

145/8

(372)

167/8 (429)

191/2 (495)

18

(mm)

6 (152)

191/2 (495)

18

60 Horizontal Bend
Dimensions
Catalog No.
A
B

24 (609)

(Pre)-24-90HB12

27

(686)

27

(686)

27

(686)

(Pre)-24-60HB12

255/16

30 (762)

(Pre)-30-90HB12

30

(762)

30

(762)

30

(762)

(Pre)-30-60HB12

277/8 (708)

161/8 (410)

189/16 (472)

175/8

(448)

205/16 (516)

(643)

36 (914)

(Pre)-36-90HB12

33

(838)

33

(838)

33

(838)

(Pre)-36-60HB12

301/2

6 (152)

(Pre)-06-90HB24

30

(762)

30

(762)

30

(762)

(Pre)-06-60HB24

277/8 (708)

161/8 (410)

189/16 (472)

9 (228)

(Pre)-09-90HB24

311/2 (800)

(Pre)-09-60HB24

293/16 (741)

167/8 (429)

197/16 (494)

175/8

(448)

205/16 (516)

311/2 (800)

311/2 (800)

(775)

12 (305)

(Pre)-12-90HB24

33

(838)

33

(838)

33

(838)

(Pre)-12-60HB24

301/2

18 (457)

(Pre)-18-90HB24

36

(914)

36

(914)

36

(914)

(Pre)-18-60HB24

331/16 (708)

191/8 (486)

221/16 (560)

(991)

(Pre)-24-60HB24

3511/16

205/8

(524)

2313/16 (605)

42 (1067)

(Pre)-30-60HB24

381/4 (972)

221/8 (564)

251/2 (648)

(Pre)-36-60HB24

407/8

235/8

271/4 (692)

24 (609)

(Pre)-24-90HB24

39

30 (762)

(Pre)-30-90HB24

42 (1067)

36 (914)

(Pre)-36-90HB24

(991)

45 (1143)

39

(991)

39

42 (1067)
45 (1143)

45 (1143)

(Pre) See page 22 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are in millimeters unless otherwise specified.

KwikSplice Aluminum Cable Tray

23

(775)

(907)

(1038)

(600)

Fittings

24 (610)

(76

KwikSplice - Fittings
Horizontal Bend 45 30 (HB)
1 pair splice plates with hardware included.

Bottoms manufactured:

45 Horizontal Bend

C
C

30 Horizontal Bend

45
HB

C
C
B

B
(7

6)

3"

Bend
Tray
Radius Width
R
in.

(mm)

Fittings

12 (305)

24 (610)

45 Horizontal Bend
Dimensions
Catalog No.
A
B

in. (mm)

in.

153/4

(mm)

in.

(400)

61/2

6 (152)

(Pre)-06-45HB12

9 (228)

(Pre)-09-45HB12

1613/16 (427)

12 (305)

(Pre)-12-45HB12

177/8 (454)

18 (457)

(Pre)-18-45HB12

20

24 (609)

(Pre)-24-45HB12

221/16

30 (762)

in.

(165)

93/16

615/16 (176)

30 Horizontal Bend
Dimensions
Catalog No.
A
B

(mm)

30
HB

3"
(76
)

Ladder = 9" Rung Spacing

04 = 4" Rung Spacing
SB = Flat sheet over 9" Rung Spacing

(mm)

in.

(mm)

in.

(mm)

(333)

31/2

(89)

C
in.

(mm)

(179)

(233)

(Pre)-06-30HB12

131/8

913/16 (249)

(Pre)-09-30HB12

137/8 (352)

311/16 (94)

77/16 (189)

73/8

(187)

107/16 (265)

(Pre)-12-30HB12

145/8 (372)

315/16 (100)

713/16 (198)

(508)

81/4

(210)

1111/16 (297)

(Pre)-18-30HB12

161/8 (410)

45/16 (135)

85/8 (219)

(560)

91/8

(232)

1215/16

(329)

(Pre)-24-30HB12

175/8

411/16

(119)

97/16 (240)

(Pre)-30-45HB12

243/16 (614)

10

(Pre)-30-30HB12

191/8 (486)

51/8 (130)

101/4 (260)

36 (914)

(Pre)-36-45HB12

265/16

51/2

111/16 (281)

6 (152)

(Pre)-06-45HB24

243/16 (614)

9 (228)

(Pre)-09-45HB24

12 (305)
18 (457)

(448)

(254)

143/16 (360)

1015/16

(278)

157/16

(392)

(Pre)-36-30HB12

205/8

10

(254)

143/16 (360)

(Pre)-06-30HB24

191/8 (486)

51/8 (130)

10/4 (260)

251/4 (641)

101/2 (267)

1413/16 (376)

(Pre)-09-30HB24

197/8 (505)

55/16 (135)

105/8 (270)

(Pre)-12-45HB24

265/16 (668)

1015/16 (278)

157/16 (392)

(Pre)-12-30HB24

205/8 (524)

51/2 (140)

111/16 (281)

(Pre)-18-45HB24

287/16 (722)

1113/16 (300)

1611/16 (424)

(Pre)-18-30HB24

221/8 (562)

515/16 (151)

1113/16 (300)

24 (609)

(Pre)-24-45HB24

309/16

1211/16

1715/16

(456)

(Pre)-24-30HB24

235/8

65/16

30 (762)

(Pre)-30-45HB24

3211/16 (830)

139/16 (344)

191/8 (486)

(Pre)-30-30HB24

(Pre)-36-45HB24

3413/16

147/16

203/8

(Pre)-36-30HB24

36 (914)

(668)

(766)

(884)

(322)

(367)

(518)

(524)

(140)

(160)

125/8 (321)

251/8 (638)

63/4 (172)

137/16 (341)

265/8

71/8

141/4 (362)

(600)

(676)

(181)

(Pre) See page 22 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are in millimeters unless otherwise specified.

24

KwikSplice Aluminum Cable Tray

KwikSplice - Fittings
Horizontal Tee (HT)

Horizontal Cross (HX)

2 pair splice plates with hardware included.

3 pair splice plates with hardware included.

HX

HT
B

3" (76)

W
A

Bend
Radius

Tray
Width

R
in. (mm)

Catalog Number
in.

(mm)

Catalog Number

(mm)

in.

(mm)

(Prefix)-06-HT12

18

(457)

36

(914)

9 (229)

(Prefix)-09-HT12

191/2

(496)

39

12 (305)

(Prefix)-12-HT12

21

(533)

42

in.

(mm)

in.

(mm)

(Prefix)-06-HX12

18

(457)

36

(914)

(991)

(Prefix)-09-HX12

191/2

(496)

39

(991)

(1067)

(Prefix)-12-HX12

21

(533)

42 (1067)

18 (457)

(Prefix)-18-HT12

24

(609)

48

(1219)

(Prefix)-18-HX12

24

(609)

48 (1219)

24 (609)

(Prefix)-24-HT12

27

(686)

54

(1372)

(Prefix)-24-HX12

27

(686)

54 (1372)

30 (762)

(Prefix)-30-HT12

30

(762)

60

(1524)

(Prefix)-30-HX12

30

(762)

60 (1524)

36 (914)

(Prefix)-36-HT12

33

(838)

66

(1676)

(Prefix)-36-HX12

33

(838)

66 (1676)

6 (152)

(Prefix)-06-HT24

30

(762)

60

(1542)

(Prefix)-06-HX24

30

(762)

60 (1524)

9 (229)

(Prefix)-09-HT24

311/2

(800)

63

(1600)

(Prefix)-09-HX24

311/2

(800)

63 (1600)

12 (305)

(Prefix)-12-HT24

33

(838)

66

(1676)

(Prefix)-12-HX24

33

(838)

66 (1676)

18 (457)

(Prefix)-18-HT24

36

(914)

72

(1828)

(Prefix)-18-HX24

36

(914)

72 (1828)

24 (609)

(Prefix)-24-HT24

39

(991)

78

(1982)

(Prefix)-24-HX24

39

(991)

78 (1982)

30 (762)

(Prefix)-30-HT24

42

(1067)

84

(2134)

(Prefix)-30-HX24

42 (1067)

84 (2134)

36 (914)

(Prefix)-36-HT24

45

(1143)

90

(2286)

(Prefix)-36-HX24

45 (1143)

90 (2286)

(Prefix) See page 22 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

KwikSplice Aluminum Cable Tray

25

Fittings

24 (610)

Horizontal Cross
Dimensions

in.

6 (152)

12 (305)

Horizontal Tee
Dimensions

3" (76)

KwikSplice - Fittings
Reducers (LR, SR, RR)
1 pair splice plates with hardware included.

Reducer Part Numbering

Prefix - 24 - RR 18
Straight Reducer

Left Reducer

Width2
Fitting
Width1
Prefix

LR

W2

Catalog No.

W1

W1

Straight Reducer - SR
Catalog No.

Right Reducer - RR
Catalog No.

in.

(mm)

in.

(mm)

in.

(mm)

in.

(mm)

in.

(mm)

(228)

(152)

(Prefix)-09-LR06

93/4

(248)

(Prefix)-09-SR06

87/8

(225)

(Prefix)-09-RR06

93/4

(248)

(152)

(Prefix)-12-LR06

111/2

(292)

(Prefix)-12-SR06

93/4

(248)

(Prefix)-12-RR06

111/2

(292)

93/4

93/4

(248)

12 (305)

18 (457)

Fittings

Left Reducer - LR

W2

RR

W2

W1

W1

SR

W2

Tray Width

Right Reducer

24 (609)

30 (762)

36 (914)

(228)

(Prefix)-12-LR09

(248)

(Prefix)-12-SR09

87/8

(225)

(Prefix)-12-RR09

(152)

(Prefix)-18-LR06

1415/16 (379)

(Prefix)-18-SR06

111/2 (292)

(Prefix)-18-RR06

1415/16 (379)

(228)

(Prefix)-18-LR09

133/16 (340)

(Prefix)-18-SR09

105/8 (270)

(Prefix)-18-RR09

133/16

(340)

12

(305)

(Prefix)-18-LR12

111/2

(292)

(Prefix)-18-SR12

93/4

(248)

(Prefix)-18-RR12

111/2

(292)

(152)

(Prefix)-24-LR06

183/8

(467)

(Prefix)-24-SR06

133/16 (340)

(Prefix)-24-RR06

183/8

(467)
(424)

(228)

(Prefix)-24-LR09

1611/16

(424)

(Prefix)-24-SR09

123/8

(314)

(Prefix)-24-RR09

1611/16

12

(305)

(Prefix)-24-LR12

1415/16 (379)

(Prefix)-24-SR12

111/2 (292)

(Prefix)-24-RR12

1415/16 (379)

18

(457)

(Prefix)-24-LR18

111/2

(292)

(Prefix)-24-SR18

93/4

(248)

(Prefix)-24-RR18

111/2

(292)

(152)

(Prefix)-30-LR06

217/8

(555)

(Prefix)-30-SR06

1415/16 (380)

(Prefix)-30-RR06

217/8

(555)

(511)

(Prefix)-30-SR09

141/16

(358)

(Prefix)-30-RR09

201/8

(511)

(462)

(Prefix)-30-SR12

133/16 (335)

(Prefix)-30-RR12

183/8

(462)

(292)

(Prefix)-30-RR18

1415/16

(380)

(248)

(Prefix)-30-RR24

111/2

(292)

(228)

(Prefix)-30-LR09

201/8

12

(305)

(Prefix)-30-LR12

183/8

(380)

18

(459)

(Prefix)-30-LR18

1415/16

(Prefix)-30-SR18

111/2

24

(609)

(Prefix)-30-LR24

111/2

(292)

(Prefix)-30-SR24

93/4

(152)

(Prefix)-36-LR06

255/16 (643)

(Prefix)-36-SR06

1611/16 (424)

(Prefix)-36-RR06

235/16 (643)

(598)

(Prefix)-36-SR09

1513/16

(402)

(Prefix)-36-RR09

239/16 (598)

(555)

(Prefix)-36-SR12

1415/16 (380)

(Prefix)-36-RR12

217/8

(555)

183/8

(462)

(228)

(Prefix)-36-LR09

239/16

12

(305)

(Prefix)-36-LR12

217/8
183/8

18

(457)

(Prefix)-36-LR18

(462)

(Prefix)-36-SR18

133/16

(335)

(Prefix)-36-RR18

24

(609)

(Prefix)-36-LR24

1415/16 (380)

(Prefix)-36-SR24

111/2 (292)

(Prefix)-36-RR24

30

(762)

(Prefix)-36-LR30

111/2 (292)

(Prefix)-36-SR30

93/4

(Prefix)-36-RR30

(248)

1415/16 (380)
111/2

(292)

(Prefix) See page 22 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches for total outside width. Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are in millimeters unless otherwise specified.

26

KwikSplice Aluminum Cable Tray

KwikSplice - Fittings
Horizontal Reducing Tee (HT)
2 pair splice plates with hardware included.

HT

Prefix - 36 - 18 - HT 24

Tray Width

* Insert Radius

R = Radius

R = 12" Radius

(305)

3" (76)

W1

Radius
Fitting
Width W2
Width W1
To complete catalog number, insert
fitting prefix.

W2

R = 24" Radius

(609)

(12" or 24")

W1
in. (mm)

9 (228)
12 (305)

24 (609)

30

36

(762)

(914)

Catalog No.

A
in.

(mm)

B
in.

(mm)

in.

(mm)

in.

(mm)

6 (152)

(Prefix)-09-06-HT*

191/2

(496)

36

(914)

311/2

(800)

60

(1524)

6 (152)

(Prefix)-12-06-HT*

21

(533)

36

(914)

33

(838)

60

(1524)

9 (228)

(Prefix)-12-09-HT*

21

(533)

39

(991)

33

(838)

63

(1600)

6 (152)

(Prefix)-18-06-HT*

24

(609)

36

(914)

36

(914)

60

(1524)

9 (228)

(Prefix)-18-09-HT*

24

(609)

39

(991)

36

(914)

63

(1600)

12 (305)

(Prefix)-18-12-HT*

24

(609)

42 (1067)

36

(914)

66

(1676)

6 (152)

(Prefix)-24-06-HT*

27

(686)

36

(914)

39

(991)

60

(1524)

9 (228)

(Prefix)-24-09-HT*

27

(686)

39

(991)

39

(991)

63

(1600)

12 (305)

(Prefix)-24-12-HT*

27

(686)

42 (1067)

39

(991)

66

(1676)

18 (457)

(Prefix)-24-18-HT*

27

(686)

48 (1219)

39

(991)

72

(1829)

6 (152)

(Prefix)-30-06-HT*

30

(762)

36

(914)

42 (1067)

60

(1524)

9 (228)

(Prefix)-30-09-HT*

30

(762)

39

(991)

42 (1067)

63

(1600)

12 (305)

(Prefix)-30-12-HT*

30

(762)

42 (1067)

42 (1067)

66

(1676)

18 (457)

(Prefix)-30-18-HT*

30

(762)

48 (1219)

42 (1067)

72

(1829)

24 (609)

(Prefix)-30-24-HT*

30

(762)

54 (1372)

42 (1067)

78

(1981)

6 (152)

(Prefix)-36-06-HT*

33

(838)

36

(914)

45 (1143)

60

(1524)

9 (228)

(Prefix)-36-09-HT*

33

(838)

39

(991)

45 (1143)

63

(1600)

12 (305)

(Prefix)-36-12-HT*

33

(838)

42 (1067)

45 (1143)

66

(1676)

18 (457)

(Prefix)-36-18-HT*

33

(838)

48 (1219)

45 (1143)

72

(1829)

24 (609)

(Prefix)-36-24-HT*

33

(838)

54 (1372)

45 (1143)

78

(1981)

30 (762)

(Prefix)-36-30-HT*

33

(838)

60 (1524)

45 (1143)

84

(2134)

(Prefix) See page 22 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

KwikSplice Aluminum Cable Tray

27

Fittings

18 (475)

W2
in. (mm)

KwikSplice - Fittings
Horizontal Expanding Tee (HT)
2 pair splice plates with hardware included.

HT
B

Prefix - 09 - 30 - HT 12
W1

R = Radius

3" (76)

Radius
Fitting
Width W2
Width W1
To complete catalog number, insert
fitting prefix.

W2

Tray Width

* Insert Radius

R = 12" Radius

(305)

R = 24" Radius

(609)

(12" or 24")

W1
in. (mm)

Fittings

6 (152)

9 (228)

12 (305)

18 (457)

24 (609)
36 (762)

W2

Catalog No.

in. (mm)

in.

(mm)

in.

(mm)

in.

(mm)

in.

(mm)

9 (228)

(Prefix)-06-09-HT*

18

(457)

39

991)

30

(762)

63

(1600)

12 (305)

(Prefix)-06-12-HT*

18

(457)

42

1067)

30

(762)

66

(1676)

18 (457)

(Prefix)-06-18-HT*

18

(457)

48

1219)

30

(762)

72

(1829)

24 (609)

(Prefix)-06-24-HT*

18

(457)

54

1372)

30

(762)

78

(1981)

30 (762)

(Prefix)-06-30-HT*

18

(457)

60

1524)

30

(762)

84

(2134)

36 (914)

(Prefix)-06-36-HT*

18

(457)

66

1676)

30

(762)

90

(2286)

12 (305)

(Prefix)-09-12-HT*

191/2

(496)

42

1067)

311/2

(800)

66

(1676)

18 (457)

(Prefix)-09-18-HT*

191/2 (496)

48

1219)

311/2 (800)

72

(1829)

24 (609)

(Prefix)-09-24-HT*

191/2 (496)

54

1372)

311/2 (800)

78

(1981)

30 (762)

(Prefix)-09-30-HT*

191/2 (496)

60

1524)

311/2 (800)

84

(2134)

36 (914)

(Prefix)-09-36-HT*

191/2

(496)

66

1676)

311/2

(800)

90

(2286)

18 (457)

(Prefix)-12-18-HT*

21

(533)

48

1219)

33

(838)

72

(1829)

24 (609)

(Prefix)-12-24-HT*

21

(533)

54

1372)

33

(838)

78

(1981)

30 (762)

(Prefix)-12-30-HT*

21

(533)

60

1524)

33

(838)

84

(2134)

36 (914)

(Prefix)-12-36-HT*

21

(533)

66

1676)

33

(838)

90

(2286)

24 (609)

(Prefix)-18-24-HT*

24

(609)

54

1372)

36

(914)

78

(1981)

30 (762)

(Prefix)-18-30-HT*

24

(609)

60

1524)

36

(914)

84

(2134)

36 (914)

(Prefix)-18-36-HT*

24

(609)

66

1676)

36

(914)

90

(2286)

30 (762)

(Prefix)-24-30-HT*

27

(686)

60

1524)

39

(991)

84

(2134)

36 (914)

(Prefix)-24-36-HT*

27

(686)

66

1676)

39

(991)

90

(2286)

36 (914)

(Prefix)-30-36-HT*

30

(762)

66

1676)

42 (1067)

90

(2286)

(Prefix) See page 22 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

28

KwikSplice Aluminum Cable Tray

KwikSplice - Fittings
Horizontal Expanding/Reducing Cross (HX)
3 pair splice plates with hardware included.

HX

Prefix - 36 - 18 - HX 24
Radius
Fitting
Width W2
Width W1
To complete catalog number, insert
fitting prefix.

B
R

3" (76)

W2

W1

Tray Width

* Insert Radius

R = 12" Radius

(305)

R = 24" Radius

(609)

(12" or 24")

W1
in. (mm)

9 (228)
12 (305)

24 (609)

30 (762)

36 (914)

Catalog No.

in.

(mm)

in.

(mm)

in.

(mm)

B
in.

(mm)

6 (152)

(Prefix)-09-06-HX*

39

(991)

36

(914)

63 (1600)

60

(1372)

6 (152)

(Prefix)-12-06-HX*

42 (1067)

36

(914)

66 (1676)

60

(1372)

9 (228)

(Prefix)-12-09-HX*

42 (1067)

39

(991)

66 (1676)

63

(1600)

6 (152)

(Prefix)-18-06-HX*

48 (1219)

36

(914)

72 (1829)

60

(1372)

9 (228)

(Prefix)-18-09-HX*

48 (1219)

39

(991)

72 (1829)

63

(1600)

12 (305)

(Prefix)-18-12-HX*

48 (1219)

42 (1067)

72 (1829)

66

(1676)

6 (152)

(Prefix)-24-06-HX*

54 (1372)

36

(914)

78 (1981)

60

(1372)

9 (228)

(Prefix)-24-09-HX*

54 (1372)

39

(991)

78 (1981)

63

(1600)

12 (305)

(Prefix)-24-12-HX*

54 (1372)

42 (1067)

78 (1981)

66

(1676)

18 (457)

(Prefix)-24-18-HX*

54 (1372)

48 (1219)

78 (1981)

72

(1829)

6 (152)

(Prefix)-30-06-HX*

60 (1524)

36

(914)

84 (2134)

60

(1372)

9 (228)

(Prefix)-30-09-HX*

60 (1524)

39

(991)

84 (2134)

63

(1600)

12 (305)

(Prefix)-30-12-HX*

60 (1524)

42 (1067)

84 (2134)

66

(1676)

18 (457)

(Prefix)-30-18-HX*

60 (1524)

48 (1219)

84 (2134)

72

(1829)

24 (609)

(Prefix)-30-24-HX*

60 (1524)

54 (1372)

84 (2134)

78

(1981)

6 (152)

(Prefix)-36-06-HX*

66 (1676)

36

(914)

90 (2286)

60

(1372)

9 (228)

(Prefix)-36-09-HX*

66 (1676)

39

(991)

90 (2286)

63

(1600)

12 (305)

(Prefix)-36-12-HX*

66 (1676)

42 (1067)

90 (2286)

66

(1676)

18 (457)

(Prefix)-36-18-HX*

66 (1676)

48 (1219)

90 (2286)

72

(1829)

24 (609)

(Prefix)-36-24-HX*

66 (1676)

54 (1372)

90 (2286)

78

(1981)

30 (762)

(Prefix)-36-30-HX*

66 (1676)

60 (1524)

90 (2286)

84

(2134)

(Prefix) See page 22 for catalog number prefix.

Width dimensions are to inside wall. For aluminum fittings add 1.5 inches for total outside width.
Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

KwikSplice Aluminum Cable Tray

29

Fittings

18 (457)

W2
in. (mm)

KwikSplice - Fittings
Vertical Bend 90 (VO, VI)
1 pair splice plates with hardware included.

90 Vertical Outside

90 Vertical Inside

90
VO

C
3" (76)

3" (76)

Bend
Radius
R

Fittings

in. (mm)

12
(305)

24
(609)

Tray
Width
Insert
in.

(mm)

(*) Insert "VO" for

Vert. Outside Bend
"VI" for
Vert. Inside Bend

VO Side Rail
Height
4" - 6" (101-152)
A
B
C

Catalog No.

in. (mm) in. (mm) in. (mm)

6 (152)

(Prefix)-06-90(*)12

9 (228)

(Prefix)-09-90(*)12

12 (305)

(Prefix)-12-90(*)12

18 (457)

(Prefix)-18-90(*)12

24 (609)

(Prefix)-24-90(*)12

30 (762)

(Prefix)-30-90(*)12

36 (914)

(Prefix)-36-90(*)12

6 (152)

(Prefix)-06-90(*)24

9 (228)

(Prefix)-09-90(*)24

12 (305)

(Prefix)-12-90(*)24

18 (457)

(Prefix)-18-90(*)24

24 (609)

(Prefix)-24-90(*)24

30 (762)

(Prefix)-30-90(*)24

36 (914)

(Prefix)-36-90(*)24

90
VI

VI Side Rail Height

4" (101)
B
C

in. (mm) in. (mm) in. (mm)

5" (127)
B
C

in. (mm) in. (mm) in. (mm)

6" (152)
B

in. (mm) in. (mm) in. (mm)

15
(381)

15
(381)

15
(381)

19
(483)

19
(483)

19
(483)

20
20
(508) (508)

20
(508)

21
(533)

21
(533)

21
(533)

27
(686)

27
(686)

27
(686)

31
(787)

31
(787)

31
(787)

32
32
(813) (813)

32
(813)

33
(838)

33
(838)

33
(838)

(Prefix) See page 22 for catalog number prefix.

Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

30

KwikSplice Aluminum Cable Tray

KwikSplice - Fittings
Vertical Bend 60 (VO, VI)
1 pair splice plates with hardware included.

60 Vertical Outside

60
VO
3" (76)

in. (mm)

24
(609)

in.

(mm)

(*) Insert "VO" for

Vert. Outside Bend
"VI" for
Vert. Inside Bend

VO Side Rail
Height
4" - 6" (101-152)
A
B
C

Catalog No.

in. (mm) in. (mm) in. (mm)

6 (152)

(Prefix)-06-60(*)12

9 (228)

(Prefix)-09-60(*)12

12 (305)

(Prefix)-12-60(*)12

18 (457)

(Prefix)-18-60(*)12

24 (609)

(Prefix)-24-60(*)12

30 (762)

(Prefix)-30-60(*)12

36 (914)

(Prefix)-36-60(*)12

6 (152)

(Prefix)-06-60(*)24

9 (228)

(Prefix)-09-60(*)24

12 (305)

(Prefix)-12-60(*)24

18 (457)

(Prefix)-18-60(*)24

24 (609)

(Prefix)-24-60(*)24

30 (762)

(Prefix)-30-60(*)24

36 (914)

(Prefix)-36-60(*)24

VI Side Rail Height

4" (101)
B
C

in. (mm) in. (mm) in. (mm)

147/8
(378)

85/8
(219)

915/16
(253)

183/8
(467)

105/8
(270)

121/4
(311)

255/16
(643)

145/8
(372)

167/8
(428)

283/4
(730)

165/8 193/16
(422) (488)

in. (mm) in. (mm) in. (mm)

6" (152)
B

in. (mm) in. (mm) in. (mm)

201/16
(510)

115/8
(296)

133/8
(340)

295/8 171/8
(753) (435)

301/2
(775)

175/8
(448)

205/16
(516)

All dimensions in parentheses are millimeters unless otherwise specified.

31

191/4 111/8 1213/16

(489 (283) (326)

(Prefix) See page 22 for catalog number prefix.

Manufacturing tolerances apply to all dimensions.

KwikSplice Aluminum Cable Tray

5" (127)
B
C

193/4
(502)

Fittings

12
(305)

Tray
Width
Insert

Bend
Radius
R

60
VI

3" (76)

C
C

60 Vertical Inside

KwikSplice - Fittings
Vertical Bend 45 (VO, VI)
1 pair splice plates with hardware included.

45 Vertical Outside

45 Vertical Inside

3" (76)

3" (76)

45
VO

45
VI

C
C
A

Bend
Radius
R

Fittings

in. (mm)

12
(305)

24
(609)

Tray
Width
Insert
in.

(mm)

(*) Insert "VO" for

Vert. Outside Bend
"VI" for
Vert. Inside Bend

VO Side Rail
Height
4" - 6" (101-152)
A
B
C

Catalog No.

in. (mm) in. (mm) in. (mm)

6 (152)

(Prefix)-06-45(*)12

9 (228)

(Prefix)-09-45(*)12

12 (305)

(Prefix)-12-45(*)12

18 (457)

(Prefix)-18-45(*)12

24 (609)

(Prefix)-24-45(*)12

30 (762)

(Prefix)-30-45(*)12

36 (914)

(Prefix)-36-45(*)12

6 (152)

(Prefix)-06-45(*)24

9 (228)

(Prefix)-09-45(*)24

12 (305)

(Prefix)-12-45(*)24

18 (457)

(Prefix)-18-45(*)24

24 (609)

(Prefix)-24-45(*)24

30 (762)

(Prefix)-30-45(*)24

36 (914)

(Prefix)-36-45(*)24

135/8
(346)

55/8
(143)

8
(203)

221/16
(561)

91/8
(232)

1215/16
(329)

VI Side Rail Height

4" (101)
B
C

in. (mm) in. (mm) in. (mm)

167/16
(417)

5" (127)
B
C

in. (mm) in. (mm) in. (mm)

6" (152)
B

in. (mm) in. (mm) in. (mm)

613/16 95/8
(173) (245)

171/8 71/8
(435) (181)

101/16
(256)

177/8
(454)

73/8
(188)

107/16
(265)

2415/16 105/16 145/8

(634) (262) (372)

255/8 105/8
(651) (270)

15
(381)

265/16 1015/16 157/16

(668) (278) (392)

(Prefix) See page 22 for catalog number prefix.

Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

32

KwikSplice Aluminum Cable Tray

KwikSplice - Fittings
Vertical Bend 30 (VO, VI)
1 pair splice plates with hardware included.

30 Vertical Outside

30
VI

30
VO
3" (76)

30 Vertical Inside

3" (76)

B
C
C

Bend
Radius
R
in. (mm)

24
(609)

in.

(mm)

(*) Insert "VO" for

Vert. Outside Bend
"VI" for
Vert. Inside Bend

VO Side Rail
Height
4" - 6" (101-152)
A
B
C

Catalog No.

in. (mm) in. (mm) in. (mm)

6 (152)

(Prefix)-06-30(*)12

9 (228)

(Prefix)-09-30(*)12

12 (305)

(Prefix)-12-30(*)12

18 (457)

(Prefix)-18-30(*)12

24 (609)

(Prefix)-24-30(*)12

30 (762)

(Prefix)-30-30(*)12

36 (914)

(Prefix)-36-30(*)12

6 (152)

(Prefix)-06-30(*)24

9 (228)

(Prefix)-09-30(*)24

12 (305)

(Prefix)-12-30(*)24

18 (457)

(Prefix)-18-30(*)24

24 (609)

(Prefix)-24-30(*)24

30 (762)

(Prefix)-30-30(*)24

36 (914)

(Prefix)-36-30(*)24

VI Side Rail Height

4" (101)
B
C

in. (mm) in. (mm) in. (mm)

5" (127)
B
C

in. (mm) in. (mm) in. (mm)

6" (152)
B

in. (mm) in. (mm) in. (mm)

115/8
(296)

31/8
(79)

63/16
(157)

135/8
(346)

35/8
(92)

75/16
(186)

141/8
(359)

33/4
(95)

79/16
(192)

145/8
(372)

315/16
(100)

713/16
(199)

175/8
(448)

411/16
(120)

97/16
(240)

195/8
(499)

51/4
(133)

101/2
(267)

201/8 53/8
(511 (137)

103/4
(273)

205/8
(524)

51/2
(140)

111/16
(282)

(Prefix) See page 22 for catalog number prefix.

Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

KwikSplice Aluminum Cable Tray

33

Fittings

12
(305)

Tray
Width
Insert

KwikSplice - Fittings
Vertical Tee Up/Down (VTU/VT)
2 pair splice plates with hardware included.

Down

VT
B
H typ
3" (76)

Up

Bend

Tray

Radius
R

Width

Fittings

in. (mm)

12
(305)

24
(609)

Vertical Tee Down

Vertical Tee Up

Side Rail Height "H"

4"

Catalog No.

Catalog No.

in.

(mm)

(152)

(Prefix)-06-VT12

(Prefix)-06-VTU12

(228)

(Prefix)-09-VT12

(Prefix)-09-VTU12

12 (305)

(Prefix)-12-VT12

(Prefix)-12-VTU12

18 (457)

(Prefix)-18-VT12

(Prefix)-18-VTU12

24 (609)

(Prefix)-24-VT12

(Prefix)-24-VTU12

30 (762)

(Prefix)-30-VT12

(Prefix)-30-VTU12

36 (914)

(Prefix)-36-VT12

(Prefix)-36-VTU12

(152)

(Prefix)-06-VT24

(Prefix)-06-VTU24

(228)

(Prefix)-09-VT24

(Prefix)-09-VTU24

12 (305)

(Prefix)-12-VT24

(Prefix)-12-VTU24

18 (457)

(Prefix)-18-VT24

(Prefix)-18-VTU24

24 (609)

(Prefix)-24-VT24

(Prefix)-24-VTU24

30 (762)

(Prefix)-30-VT24

(Prefix)-30-VTU24

36 (914)

(Prefix)-36-VT24

(Prefix)-36-VTU24

5"

(101)

6"

(127)

(152)

in. (mm)

in. (mm)

in. (mm)

in. (mm)

in. (mm)

in. (mm)

15
(381)

34
(846)

15
(381)

35
(889)

15
(381)

36
(914)

27
(686)

58
(1473)

27
(686)

59
(1498)

27
(686)

60
(1524)

(Prefix) See page 22 for catalog number prefix.

Manufacturing tolerances apply to all dimensions.

All dimensions in parentheses are millimeters unless otherwise specified.

34

KwikSplice Aluminum Cable Tray

KwikSplice Aluminum Cable Tray

U.S. Customer Service Center is staffed Monday through Friday

from 7 a.m. to 5:00 p.m. Central Standard Time.
For more information, visit www.bline.com.

Eatons B-Line Business

509 West Monroe Street
Highland, IL 62249
United States
Phone: (800) 851-7415
www.cooperbline.com/contactus

Eatons B-Line Business

5925 McLaughlin Road
Mississauga, ON L5R 1B8
Canada
Phone: (800) 569-3660
www.cooperbline.com/contactca

Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eatons B-Line Business
509 West Monroe Street
Highland, IL 62249
Phone: 800-851-7415
Fax: 618-654-1917
www.bline.com
2014 Eaton
All Rights Reserved
Printed in USA
Publication No. KSALCT-14
October 2014 30M

Eaton is a registered trademark

All other trademarks are property
of their respective owners.