Equip Global Leading Offshore Engineering Training Provider

About Your Expert Trainer

Mr. Helgesen, Sondre Luca
General Manager, Stressman Engineering

Sondre Luca Helgesen (MSc) is founder, CEO and senior analyst at Stressman Engineering AS. His company, as himself, is
specialized in the fields of pipe stress, pressure vessel calculations and analyzes of non-standard pressure components.
He has nine years of engineering experience, mainly within the field of stress calculations. Sondre is also lecturing in
mechanical calculation at Telemark University College.

Pipe stress calculations with Triflex Dynamics and Caesar II according to ASME B31.3, B31.8, EN13445, DNVOS-F101 and UKOOA/BS7159 (GRE pipes). Buckling of pipes according to DNV-OS-F101 and other methods.
FEA calculations with ANSYS Workbench and SolidWorks Simulation to verify special piping/vessel
components, structural joints and other components.
Vessel calculations with Visual Vessel Design (VVD) according to ASME VIII div 1 and div 2, EN13480, PED and
PD5500.
Structural calculations in accordance with Eurocode 3 and AISC.
Dynamical analyses with beam or finite element analyses. Detailed knowledge regarding dynamical analyses
theory and usage.
Knowledge about HISC (Hydrogen Induced Stress Cracking). Non-linear pipe stress calculations with FEA, to
check HISC according to DNV-RP-F112.

Other Relevant Trainings You May Interested:

FPSO & FLNG Topsides Design, Layout & Processing (March 2015 in Singapore & London)
FPSO & FLNG Topsides Equipment Layout (April 2015 in Singapore)
FLNG Process Engineering (May 2015 in Singapore)
Topsides Structural and Process Optimization (September 2015 in Singapore)
Researched & Developed By:

Email: [email protected] | Tel: +65 6376 0856 | www.equip-global.com for more information

Floating Unit Piping Stress Analysis

22 - 24 April 2015 | Singapore

Course Introduction
Piping system design constitutes a major part of the design and engineering
effort in FPSO & FLNG topsides facility. Stress analysis is a critical component of
topsides piping design due to the extreme operating environment, safety of
related components and complex piping process within limited topsides space.
The objective of pipe stress analysis is to prevent premature failure of piping and
piping components and ensuring that piping stresses are kept within allowable
limits.
This Floating Unit Piping Stress Analysis workshop is designed to provide you an
in-depth understanding of the engineering principles and design requirements
involved in Topsides Process Piping Design and Stress Analysis. Key challenges
such as the flexibility and movement of the floating unit deck, location on the
deck, sea states and weather conditions, piping temperatures and pressures
at the required operating conditions, piping material and flexibility and piping
runs configuration will be addressed by your expert course trainer.
Unlike other events, this training course will be packed with case-studies, proven
solutions and content specific to your needs.

Key Topics Covered

Codes Governing Topsides Process Piping Design and Stress Analysis

Piping Stress Philosophy
Piping Stress Analysis Work Instruction
Loads to be considered in Topsides Process piping design
Equipment nozzle load calculations
Flange calculations
Pressure relief- and discharge force calculations
Accidental blast loads and allowable stresses
Hogging-Sagging, pitch & roll and acceleration (towing) Analysis
Fatigue calculations
Documentation of stress analysis
Definition of Special supports

Who Should Attend?

This workshop is designed for personnel who want to improve their knowledge
and skills involved in FPSO or FLNG topsides pipe stress analysis. Those who will
benefit the most from this workshop include the following:

Stress Engineers
Equipment Layout Designers and Engineers
Piping designers and piping engineers
Structural designers and engineers
Mechanical engineers
Process Designers and Engineers
Project engineers
Proposal Engineers

Programme format
This unique, cutting edge
programme will be delivered in a
highly interactive and practical,
tutorial style format. Theory will
be supported and illustrated
through a combination of realworld case studies and an
extended hypothetical scenario
that enables participants to easily
incorporate the programme
insights, techniques and
procedures into their own
organisations

Pre-course questionnaire
To ensure that you gain maximum
benefit from this event, a detailed
questionnaire will be sent to you
to establish exactly what your
course needs are. The completed
forms will be analysed by the
course facilitator. As a result, we
ensure the course is delivered at
an appropriate level and that
relevant issues will be addressed.
The comprehensive course
material will enable you to digest
the subject matter in your own
time.

Would you like to run this

course in-house?
(Save up to 15%)
This course can be presented
exclusively for your organisation
on an in-house basis, tailored to
meet your specific needs, at a
place and time of your
convenience. If you have a team
of 10 or more interested in this
course, lets discuss how we can
work together to meet your
training needs. Please contact us
and we will be pleased to assist.

Email: [email protected] | Tel: +65 6376 0856 | www.equip-global.com for more information

Floating Unit Piping Stress Analysis

22 - 24 April 2015 | Singapore

Training Agenda Day 1 Day 3

Design challenges for FPSO&FLNG and Topsides Process
Piping
Codes Governing Topsides Process Piping Design and Stress
Analysis

ASME B31.3, ASME B31.4 and ASME B31.8

DNV CN 30.7, DNV RP C203, C204, D101, DNV OS F101.
NORSOK L002
Other codes including applicable local codes
Role and scope of codes
Information available from codes
Typical organisation of code material

Type of calculations

Comprehensive calculations
Hand calculations

Loads to be considered in Topsides Process piping design

Dead weight
Internal pressure
Sustained loads
Occasional loads
Pipe acceleration due to transportation
Pipe acceleration due to towing
Pipe acceleration during operation
Environmental loads
Live loads
Forces due to the dynamic loads
Slug force
Thermal expansion and contraction loads (Design & Operating)
Structure & hull Displacement
Other displacement loads
Blast/explosion loads
Green sea
Accidental heel
Accidental heat load from fire

Wall thickness calculations & Flexibility calculations

Equipment nozzle load calculations

Compressors
Turbines
Turbo-compressors
Centrifugal pumps & others
Pressure vessels
Skids with piping connections
X-Mass Trees

Flange calculations

ASME B16.5, ASME B16-47 flange calculations

ASME SECTION VIII Div 2
API Flange calculations
Clamp Connections
NORSOK Compact Flanges

Pressure relief- and discharge force calculations

Pressure Safety Valve discharge reaction forces

Bursting-and rupture Disc reaction forces
Flare-tip reaction forces

Expansion joint thrust load & Slip- joint thrust load

Calculation

Expansion joint thrust load

Slip- joint thrust load

Blast load calculations - Accidental blast loads and

allowable stresses

Blast drag pressure

Blast drag load
Blast and operational flexibility
Blast and structural deformation
Blast drag coefficient, Cd
Dynamic Load Factor for blast, DLF
Temperature and internal pressure effects

Fatigue calculations

Vibration
Typical piping exposed to fatigue
Fatigue analysis of wellhead flowlines
Recommended design codes and standards for fatigue analysis

Non-standard component calculations

Load case description- and combinations
Pipe stress priority piping

Conflict with piping code requirements

Visual approval of piping systems
Requirement to documentation of visually approved piping
Critical line selection list
Pipe Stress Priority Piping

Design of pipe supports

Pipe support rigidity

Local stresses in pipe from a trunnion, lugs and other local
attachments
Pipe support friction
Bracing of branch connections

Documentation of stress analysis

Documentation for the project and third party verification

Requirement to a pipe stress report
Requirement to a pipe stress isometric
Documentation for Audit

Recap of training and Q&A session

Use this session to ask the expert trainer any burning questions you
have. Take full advantage of this interactive Q&A session and get
practical ideas for solving your piping stress analysis problems!

Valves reactions

BDV, CV & Buckling Pin Relief Valves

Email: [email protected] | Tel: +65 6376 0856 | www.equip-global.com for more information

Please complete in BLOCK CAPITALS as

information is used to produce delegates
badges
Please photocopy for multiple bookings.
Your priority registration code is printed
below. Please quote it when registering
Event Code: OG10024.001

TRANING COURSE PACKAGE PRICING STRUCTURE

TRAINING COURSE

EARLY BIRD

STANDARD

Floating Unit Piping Stress Analysis

(22 24 April 2015)

SGD 3,499
(Pay by 27 February
2015)
SGD 2,799

SGD 3,999

SGD 5,799

SGD 6,299

FPSO & FLNG Topsides Equipment Layout

(20 21 April 2015)
Floating Unit Piping Stress Analysis +
FPSO & FLNG Topsides Equipment Layout

SGD 3,299

Equip Global recognises the value of learning in teams

Group bookings at the same time from the same
company receive the following:
3 or more at 7% off
5 or more at 10% off
This offer is exclusive of the early bird discount. Call us
for a special discount rate for teams of 8 and above.

In-House Training: I would like to organise this training on-site and save on total course fees! For further information about On-site Solutions, please
+65 6376 0908 or email [email protected]
PAYMENT METHODS

DELEGATES REGISTRATION DETAILS

I WISH TO PAY BY CHECK / BANK DRAFT: Made payable to Equip Global Singapore Pte Ltd

DELEGATE 1
Title:
Full Name
Job Title
Department
Contact Number
Email Address

I WISH TO PAY BY CREDIT CARD: Please debit my credit card

Card Types:
(Please Circle)
Card Number:
Name on Card
Signature

DELEGATE 2
Title:
Full Name

MasterCard

Expiry Date:

MM/YYYY

CVC/Security
Code:
Date

DD/MM/YYYY

BY DIRECT TRANSFER
Equip Global Bank
Account Name: Equip Global Pte Ltd
Details
Account Number: 630-824993-001 Swift Code: OCBCSGSG
Bank Address: Overseas-Chnese Banking Corporation Limited
65 Chulia Street, OCBC Centre, Singapore 049513
Tel: (65) 65381111 www.ocbc.com

Job Title
Department
Contact Number
Email Address

Intermediary Bank: JP Morgan Chase Bank, New York, USA

Swift Code: CHASU33 Bank Code: 7339
All bank charges to be the payer. Please ensure that Equip Global receives the full invoiced amount.

Company
Address

PAYMENT TERMS & CONDITIONS

Country
Approving
Manager Name
Email Address
Approving
Manager
Signature

VISA

Postal Code

Dates

DD/MM/YY

All 'Early Bird', 'Super Saver' Discounts or any discounts offered by Equip Global require payment at
time of registration and before the cut-off date in order to receive any discount. All discount offers
cannot be combined with any other offer. - 100% payment is required upon receipt of invoice and
includes lunches, refreshments and detailed conference materials. - Registration made within 14
working days of the conference/training must be paid by credit card. - No delegate will be allowed into
the conference or training unless all payments are received prior to the conference or training Discounts do not apply to workshop(s) only bookings. - Please note that credit card payments will incur
a paypal charge of 3.4% + USD0.30. - Payment not made at the time of registration will be subject to a
USD99 processing fee

Equip Global Payment, Cancellation, Substitution and Postponement Policy

I Agree to Equip Globals
Payment Terms

If the invoice is to be addressed for the attention of a different person than

the delegates, please complete the details below:
Full Name
Email Address
Telephone
If you have not received an acknowledgement before the conference please call us at
+65 63760908 to confirm your booking

PURCHASE TRAINING MATERIAL

I am registering as a delegate. Please send me an extra set of the
training material at SGD 199.
I cannot attend the event. Please send me a set of the training material
at SGD 999.

Substitution of delegate places is permitted, provided that Equip Global is given reasonable advance
notice in writing. For any cancellations received in writing not less than fifteen (15) working days prior
to the Conference or Training, you will receive a 90% credit to be used at another Equip Global
conference which must occur within six months from the date of issuance of such credit. An
administration fee of 10% of the registration fee will be retained by Equip Global for all permitted
cancellations. No credit will be issued for any cancellations occurring within fourteen (14) working days
(inclusive) of the conference or training.In the event that Equip Global postpones an event for any
reason and the delegate is unable or unwilling to attend in on the rescheduled date, you will receive a
credit for 100% of the registration fee paid. You may use this credit for another Equip Global event to
be mutually agreed with Equip Global, which must occur within six months from the date of
postponement.Except as specified above, no credits will be issued for cancellations. In any
circumstance, no refund will be made for cancellations. All cancellations must be made in writing.
Equip Global is not responsible for any loss or damage as a result of a substitution, alteration or
cancellation/postponement of an event. Equip Global shall assume no liability whatsoever in the event
this conference is cancelled, rescheduled or postponed due to a fortuitous event, Act of God,
unforeseen occurrence or any other event that renders performance of this conference impracticable,
illegal or impossible. For purposes of this clause, a fortuitous event shall include, but not be limited to:
war, fire, labor strike, extreme weather or other emergency. While speakers, topics and session
timings were confirmed at the time of publishing, circumstances beyond the control of the organizers
may necessitate substitutions, alterations or cancellations of the speakers and/or topics and/or session
timings. As such, Equip Global reserves the right to alter or modify the advertised speakers and/or
topics and/or session timings if necessary without any liability to you whatsoever. Any substitutions or
alterations will be updated on our web page and all marketing collaterals as soon as possible.