Scribd Logo
Upload

Welcome to Scribd!

  • 299 views

    Gemtek WLTXCS-100

    Uploaded by

    Jc Tuzon
    The document provides instructions for installing and setting up an outdoor LTE CPE device. It includes information on: - Required equipment for installation including the CPE device, mounting kit, power plug, and Ethernet cable. - LED indicator lights and their meanings. - Details on the ODU panel including ports and connectors. - A 4-step process for installation including selecting a location, mounting the device, connecting cables, and configuring network settings. - Easy setup instructions including inserting a SIM card, connecting cables, and accessing the web interface to configure network settings. - Regulatory information and compliance statements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Gemtek WLTXCS-100

    Uploaded by

    Jc Tuzon
    299 views13 pages
    The document provides instructions for installing and setting up an outdoor LTE CPE device. It includes information on: - Required equipment for installation including the CPE device, mounting kit, power plug, and Ethernet cable. - LED indicator lights and their meanings. - Details on the ODU panel including ports and connectors. - A 4-step process for installation including selecting a location, mounting the device, connecting cables, and configuring network settings. - Easy setup instructions including inserting a SIM card, connecting cables, and accessing the web interface to configure network settings. - Regulatory information and compliance statements.

    Original Description:

    Gemtek WLTXCS-100

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for installing and setting up an outdoor LTE CPE device. It includes information on: - Required equipment for installation including the CPE device, mounting kit, power plug, and Ethernet cable. - LED indicator lights and their meanings. - Details on the ODU panel including ports and connectors. - A 4-step process for installation including selecting a location, mounting the device, connecting cables, and configuring network settings. - Easy setup instructions including inserting a SIM card, connecting cables, and accessing the web interface to configure network settings. - Regulatory information and compliance statements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    299 views13 pages

    Gemtek WLTXCS-100

    Uploaded by

    Jc Tuzon
    The document provides instructions for installing and setting up an outdoor LTE CPE device. It includes information on: - Required equipment for installation including the CPE device, mounting kit, power plug, and Ethernet cable. - LED indicator lights and their meanings. - Details on the ODU panel including ports and connectors. - A 4-step process for installation including selecting a location, mounting the device, connecting cables, and configuring network settings. - Easy setup instructions including inserting a SIM card, connecting cables, and accessing the web interface to configure network settings. - Regulatory information and compliance statements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 13

    WLTXCS-100

    Quick Start Guide

    1
    The LTE Outdoor CPE

    Quick Start Guide

    Mount Kit (Screw & Bracket)

    What You Need


    PoE

    Power Plug(plug pin type is


    different based on different
    country)

    2
    LED Name

    Location

    Color

    LED Behavior

    LED Behavior

    Status Indication

    LED list

    Main Power

    Ethernet
    Status

    SIM status

    ON

    Power On

    OFF

    Power Off

    Blue

    Yellow

    Green

    Steady ON

    Ethernet connected

    Blinking

    Data transmission

    OFF

    No Ethernet action

    Steady ON
    Blinking when On-hook
    OFF

    SIM Detected
    PUK / PIN Code
    No SIM Detected

    When CPE is power on, each LED indicates each link


    status

    4G Status LED : Link Status

    4G-1

    Red

    Steady ON

    CINR < 8dB

    4G-2

    Red/
    Yellow

    Steady ON

    8dB < CINR < 24dB

    4G-3

    Red/
    Yellow/
    Green

    Steady ON

    CINR >= 24dB

    ODU Panel

    ODU Panel

    1.

    One RJ-14 connector for connecting to the telephone line.

    2.

    One RJ-45 connector for connecting to the PoE adaptor.

    3.

    LED indicator inside and SIM card slot for inserting SIM card.

    4.

    A grounding screw on the rear panel.

    4 Installation

    Installation

    Before installing the ODU, verify that you have all the items listed in section 1:
    What You Need. If any of the items are missing or damaged, contact your LTE
    service provider.
    Step 1: Selecting a Location
    The ODU should be pole-mounted outdoors and aligned so its antenna faces the
    nearest LTE base station. When selecting a suitable location for the unit, consider
    these guidelines:
    1.

    Place the ODU as high as possible to achieve the best possible link quality.

    2.

    Place the ODU away from power and telephone lines.

    3.

    Avoid placing the ODU too close to any metallic reflective surfaces.

    4.

    Be sure to ground the ODU with an appropriate grounding wire (not included)
    by attaching it to the grounding screw on the unit and to a good ground
    connection.

    Step 2: Before Mounting the Device


    1.

    Make sure the ODU is turned off and NO PoE supply connected before you
    insert SIM card or it may damage your SIM card.

    2.

    Please Check below items before installing the outdoor device

    LED indicator inside and SIM card slot for inserting SIM card

    One RJ-45 connector for connecting to the ODU to IDU or PoE


    Supplier

    Make sure the grounding screw on the rear panel

    Step 3: Connect the cable with waterproof node


    1.

    Remove the sealing gland plug from the gland nut.

    2.

    Open the sealing gland nut and remove it. Do not disassemble the gland base
    from the bracket.

    3.

    Insert the cable into the sealing gland base and connect it to the RJ-45
    connector at the bottom of the ODU, labeled. Make sure that the connector is

    4 Installation

    completely inserted and tightened.


    4.

    Insert the rubber bushing on the cable into the gland base.

    5.

    Gently twist the body into the ODU.

    Step 4: Mounting the Device: Installing Pole Mount


    1.

    Mount the ODU unit on a pole (Diameter between 1-4 inch) with the Pole
    Mount Kit.

    2.

    Thread the M10*100mm bolts through a spring washer, flat washer and the
    bracket holes.

    3.

    With the connector facing downward, attach the ODU to a size of 1 inch -4
    inch pole.

    4.

    Attach the bracket to the other side of the pole.

    5.

    Thread the M10*100 mm bolts through both holes on either side. Tighten the
    nuts.

    5 Easy Setup

    Easy Setup

    Step 1: Physical connection as following


    1.

    Insert a USIM in device(SIM card slot)

    2.

    Use Ethernet cable to connect the PoE (RJ45 Port) and ODU

    3.

    Use RJ11 cable to connect the PoE (RJ14 Port) and ODU

    4.

    Connect PoE to your PC.

    5 Easy Setup

    Step 2: Connect to the Internet


    Follow the steps below to configure your device through the web interface:
    1.

    Click the web browser (Internet Explorer) and enter default IP address of the
    ODU CPE: http://192.168.1.1

    2.

    Enter ODU administrator login username/password to access the web


    management interface. The default username/password: admin/LTEcpe.

    Main page after login

    3.

    Simply configure the device settings after login.

    6 Regulatory

    Regulatory

    6.1 FCC Statement


    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
    conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
    interference received, including interference that may cause undesired operation.
    This equipment has been tested and found to comply with the limits for a Class B digital device,
    pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
    against harmful interference in a residential installation. This equipment generates, uses and can
    radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
    cause harmful interference to radio communications. However, there is no guarantee that
    interference will not occur in a particular installation. If this equipment does cause harmful
    interference to radio or television reception, which can be determined by turning the equipment off
    and on, the user is encouraged to try to correct the interference by one of the following measures:
    -

    Reorient or relocate the receiving antenna.


    Increase the separation between the equipment and receiver.
    Connect the equipment into an outlet on a circuit different from that to which the receiver is
    connected.
    Consult the dealer or an experienced radio/TV technician for help.

    FCC Caution: Any changes or modifications not expressly approved by the party responsible for
    compliance could void the user's authority to operate this equipment.
    This transmitter must not be co-located or operating in conjunction with any other antenna or
    transmitter.
    Radiation Exposure Statement:
    This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
    environment. This equipment should be installed and operated with minimum distance 40 cm
    between the radiator & your body.

    6 Regulatory

    6.2 Industry Canada statement


    This device complies with Industry Canada licence RSS standard(s). Operation is subject to the
    following two conditions:
    (1) this device may not cause interference, and
    (2) this device must accept any interference, including interference that may cause undesired
    operation of the device.
    Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio licence.
    L'exploitation est autorise aux deux conditions suivantes :
    (1) l'appareil ne doit pas produire de brouillage, et
    (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage
    est susceptible d'en compromettre le fonctionnement.
    Radiation Exposure Statement:
    This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
    This equipment should be installed and operated with minimum distance 40 cm between the radiator
    & your body.
    Dclaration d'exposition aux radiations:
    Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un
    environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 40 cm
    de distance entre la source de rayonnement et votre corps.
    Type
    Outdoor patch ant.

    Connector
    MHF

    Gain
    15.15

    6 Regulatory

    6.3 Europe EU Declaration of Conformity


    This device complies with the essential requirements of the R&TTE Directive 1999/519/EC. The
    following test methods have been applied in order to prove presumption of conformity with the
    essential requirements of the R&TTE Directive 1999/519/EC:
    EN 302 326-2 V1.2.2
    EN 302 326-3 V1.3.1
    EN 301 908-1 V6.2.1
    EN 301 908-13 V6.2.1
    EN 301 489-1 V1.9.2
    EN 301 489-4 V2.1.1
    EN 301 489-24 V1.5.1
    EN 62311:2008
    EN 60950-12006A11A1A12A2:
    2013
    In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain
    authorization to use the device for setting up outdoor radio links and/or for supplying public access to
    telecommunications and/or network services.

    0682
    esky
    [Czech]

    [Gemtek] tmto prohlauje, e tento [LTE/WiMAX Outdoor CPE] je ve shod se zkladnmi


    poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES.

    Dansk
    [Danish]

    Undertegnede [Gemtek] erklrer herved, at flgende udstyr [LTE/WiMAX Outdoor CPE]


    overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF.

    Deutsch
    [German]

    Hiermit erklrt [Gemtek], dass sich das Gert [LTE/WiMAX Outdoor CPE] in bereinstimmung
    mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der
    Richtlinie 1999/5/EG befindet.

    6 Regulatory

    Eesti
    [Estonian]

    Kesolevaga kinnitab [Gemtek] seadme [LTE/WiMAX Outdoor CPE] vastavust direktiivi


    1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele.

    English

    Hereby, [Gemtek], declares that this [LTE/WiMAX Outdoor CPE] is in compliance with the
    essential requirements and other relevant provisions of Directive 1999/5/EC.

    Espaol
    [Spanish]

    Por medio de la presente [Gemtek] declara que el [LTE/WiMAX Outdoor CPE] cumple con los
    requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva
    1999/5/CE.

    [Greek]

    [Gemtek] [LTE/WiMAX Outdoor CPE]



    1999/5/.

    Franais
    [French]

    Par la prsente [Gemtek] dclare que l'appareil [LTE/WiMAX Outdoor CPE] est conforme aux
    exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

    Italiano
    [Italian]

    Con la presente [Gemtek] dichiara che questo [LTE/WiMAX Outdoor CPE] conforme ai
    requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

    Latviski
    [Latvian]

    Ar o [Gemtek] deklar, ka [LTE/WiMAX Outdoor CPE] atbilst Direktvas 1999/5/EK btiskajm


    prasbm un citiem ar to saisttajiem noteikumiem.

    Lietuvi
    [Lithuanian]

    iuo [Gemtek] deklaruoja, kad is [LTE/WiMAX Outdoor CPE] atitinka esminius reikalavimus ir
    kitas 1999/5/EB Direktyvos nuostatas.

    Nederlands
    [Dutch]

    Hierbij verklaart [Gemtek] dat het toestel [LTE/WiMAX Outdoor CPE] in overeenstemming is
    met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

    Malti
    [Maltese]

    Hawnhekk, [Gemtek], jiddikjara li dan [LTE/WiMAX Outdoor CPE] jikkonforma mal-tiijiet


    essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

    Magyar
    [Hungarian]

    Alulrott, [Gemtek] nyilatkozom, hogy a [LTE/WiMAX Outdoor CPE] megfelel a vonatkoz


    alapvet kvetelmnyeknek s az 1999/5/EC irnyelv egyb elrsainak.

    Polski
    [Polish]

    Niniejszym [Gemtek] owiadcza, e [LTE/WiMAX Outdoor CPE] jest zgodny z zasadniczymi


    wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

    Portugus
    [Portuguese]

    [Gemtek] declara que este [LTE/WiMAX Outdoor CPE] est conforme com os requisitos
    essenciais e outras disposies da Directiva 1999/5/CE.

    Slovensko
    [Slovenian]

    [Gemtek] izjavlja, da je ta [LTE/WiMAX Outdoor CPE] v skladu z bistvenimi zahtevami in


    ostalimi relevantnimi doloili direktive 1999/5/ES.

    6 Regulatory

    Slovensky
    [Slovak]

    [Gemtek] tmto vyhlasuje, e [LTE/WiMAX Outdoor CPE] spa zkladn poiadavky a vetky
    prslun ustanovenia Smernice 1999/5/ES.

    Suomi
    [Finnish]

    [Gemtek] vakuuttaa tten ett [LTE/WiMAX Outdoor CPE] tyyppinen laite on direktiivin
    1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen.

    Radiation Exposure Statement:


    This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment.
    This equipment should be installed and operated with minimum distance 40 cm between the radiator
    & your body.

    You might also like