Motor Starters
Motor Starters
Motor Starters
Motor Starters
Type MN
. Direct-On-Line Starters
. Star-Delta Starters
TM
Starter
Range
Ap"lications
MN starters are available in following versions:
Direct-On-Line starter
Semi automatic Star-Delta, starter (SASD)
. Fully automatic Star-Delta, starter (FASD)
All MN DOL & Star-Delta starters are suitable
for 3-Phase Squirrel Cage motors. MN DOL
starters are available in following ratings:
^
.
.
.
.
MN 16 DOL-upto 10 HP (7.5kW)
MN 25 DOL-upto 15 HP (11 kW)
MN 32 DOL-upto 20 HP (15kW)
MN 45 DOL-upto 30 HP (22.5kW)
MN 65 DOL-upto 45 HP (33.5kW)
Construction
MN starters consist of MNX contactors & MN
relays. The relay is directly mounted on the
contactor. The colour of the sheet steel enclosure
is two-toned. The box is powder coated and gray
in colour. The cover is powder coated with ivory
colour. The push button is flush mounted in an
enclosure cover, which has been given an
altogether `new look'.
Operational Details
Relay Setting
A screwdriver is used to set the relay
indicator (which is on the dial) to the
full load current setting. This ensures
optimum protection under Overload and
Single Phasing of the motor. In case of
Star-Delta Starters, the relay must be set
at the values In /j (0.58 In) as given in
the selection table, since the connected
relay carries only the phase current in
Motors having Delta connected winding.
MN DOL starters
. MN 16, 25, 32, 45, 65 DOL starters
incorporate type MNX contactors.
MN 16, 25, 32 DOL starters
incorporate MN 2 relays.
MN 45, 65 DOL starters incorporate
MN 5 relays.
MN Star-Delta Starters
MN Star-Delta starters are available in
semi automatic and fully automatic
versions.
MN 16, 25, 32, 45, 65, 80, 110, 140
Star-Delta starters incorporate type
MNX contactors.
MN 16, 25, 32, Star-Delta starters
incorporate MN 2 relays.
MN 45, 65, 80, 110, Star-Delta starters
incorporate MN 5 relays.
MN 140 Star-Delta starters
incorporate MN 12L relays.
In case of SASD Starters, the motor
gets connected in Star connection when
the green button is pressed, after
releasing the green button motor gets
connected in Delta connection. The
button must be released only when the
motor reaches its normal speed.
In case of FASD Starter, motor gets
connected in Star connection, when
the green button is pressed. An electronic
timer automatically performs the changeover function from Star to Delta.
1
Two-tone colour
combinations with box in
steel gray & cover in ivory
Flush-mounted
push buttons.
IP 54 degree of protection
Corrosion resistant powder coated
enclosure with IP/54 protection class
makes MN starters most suitable for
chemical factories, polluted industrial
and dusty agricultural environment.
Terminal Block
MN Star-Delta starters are provided
with terminal block with proper
terminal marking for ease of wiring.
Terminal block can accommodate
both aluminium & copper cables.
Electronic Timer
MN Fully Automatic Star-Delta
starters are provided with Electronic
Timer for high repeat accuracy.
HP
KW
Approx. Full
Load
Current In
(A)
1.5
3.5
3-5
HF
16
FN32
HF
16
FN32
HF
16
FN32
HF
20
FN 32
MN 16
DOL
MN 25
DOL
MN 32
DOL
Relay
Range
( A)
Relay
Contactor
Recommended
Back-up HRC Fuse
Type
Rating (A)
Switch
Disconnector
Fuse Unit
2.5
1.8
4.8
3-5
2.2
4.5-7.5
6.2
4.5 - 7.5
3.7
7.5
6-10
HF
20
FN32
25
FN32
MN 2
MNX 18
4.5
6-10
HF
7.5
5.5
11
9 - 15
HF
32
FN 32
10
7.5
14
9 - 15
HF
32
FN 32
7.5
5.5
11
9 - 15
HF
32
FN 32
10
7.5
14
9-15
HF
32
FN32
50
FN 63
MN 2
MNX 25
12.5
9.3
18
14 - 23
HF
15
11
21
14 - 23
HF
63
FN 63
15
11
21
20 - 33
HF
63
FN 63
17 .5
13
24
20 - 33
HF
63
FN 63
20
15
28
20 - 33
HN/100
63
FN 100
HN/100
80
FN 100
25
MN 45
DOL
MN 65
DOL
MN 2
MNX 32
18.5
35
30 - 50
30
22.5
40
30 - 50
HN/100
80
FN 100
30
22.5
40
30 - 50
HN/100
80
FN 100
35
26
47
30 - 50
HN/100
100
FN 100
30
55
HN/100
100
FN 100
HN/100
100
FN 100
40
45
33.5
MN 5
45 - 75
MN 5
MNX 45
MNX 70
45 - 75
60
MN 16
SASD/
FASD
p hase
Current
n
i /,u
Relay
Range
(A)
10
7.5
14
8.08
6- 10
12.5
9.3
18
10.4
9 - 15
Relay
MN 2
Contactor
MNX 18
Recommended
Back-up HRC Fuse
Switch
Disconnector
Fuse Unit
Type
Rating (A)
HF
20
FN 32
HF
32
FN 32
15
11
21
12.1
9-15
HF
32
FN32
MN 25
SASD/
20
15
28
16.2
14 - 23
HF
40
FN 63
25
18.5
35
20.2
14 - 23
HF
50
FN 63
MN 32
SASD/
FASD
30
22.5
40
23
20 - 33
HF
63
FN 63
35
26
47
27
20 - 33
HN/00
63
FN 100
40
30
55
31.8
30 - 50
HN/00
63
FN 100
45
33.5
60
34.6
30 - 50
HN/00
80
FN 100
50
37.5
66
38.2
30 - 50
HN/00
80
FN 100
60
45
80
46.2
45 - 75
HN/00
100
FN 100
65
48.5
87
50
45 - 75
HN/00
100
FN 100
70
52
94
54.5
45 - 75
HN/00
125
FN 125
75
55
100
57.5
45 - 75
HN/00
125
FN 125
90
67.5
120
69.2
45 - 75
HN/0
160
Fn 200
MN 110
FASD
100
75
135
77.9
66 - 110
HN/0
160
FN 200
125
90
165
95
66 - 110
HN/0
200
FN 200
MN 140
FASD
150
110
200
115
90 - 150
HN/1
250
FN 250
175
130
230
132.8
90 - 150
HN/1
250
FN 250
MN 45
FASD
MN 65
FASD
MN 80
FASD
MN 2
MN 2
MN 5
MN 5
MNX 25
MNX 32
MNX 45
MNX 70
MN 5
MNX 80
MN 5
MNX 110
MN 12L
MNX 140
Version
MN 16
MN 25
MN 32
MN 45
MN 65
SS94351
SS94352
SS94353
SS94017
SS94018
Relay Range
3.0 - 5.0
4.5 - 7.5
6.0-10
9.0 - 15
BOBO
14 - 23
BODO
20 - 33
BOEO
30 - 50
240
45 - 75
3.0 - 5.0
COSO
4.5-7.5
COUO
6.0 - 10
COVO
9.0 - 15
COBO
COBO
360
14 - 23
CODO
20 - 33
COED
30 - 50
45 - 75
3.0 - 5.0
DOSO
4.5-7.5
DOUG
6.0 - 10
DOVO
9.0 - 15
DOBO
DOBO
14 - 23
DODO
20 - 33
DOEO
30 - 50
DOGO
DOJO
415
45 - 75
MN 25
MN 32
MN 45
MN 65
MN 80
MN 110
MN 140
SS94363
SS94364
SS94365
SS94366
SS94021
SS94022
SS94705
SS94706
SS94707
6.0 - 10
COVO
9.0 - 15
COBO
14 - 23
CODO
20 - 33
COED
30-50
45-75
66-110
90 - 150
6.0-10
DOVO
9.0 - 15
DOBO
14 - 23
DODO
20 - 33
DOEO
30 - 50
DOGO
45-75
DOJO
DOJO
66 - 110
DOKO
90 - 150
DOMO
Srarter Type
Version
Cat. No.
SASD
FASD
Rated control
voltage (Us) VA,
360
415
Relay
Range
* Note: These are the stnadard combinations of relay and contactor. Any other combinations can be supplied on request.
4
Overall Dimensions
4 MOUNTING HOLES 0 6
to $l
-O
l
235
136
----------------------------------------128
105
139
2.3
^ 4-
DOL Starters
MN 16, MN 25, MN 32
O11
IOlmI
200
352
297
I
4 MOUNTING HOLES
153
08.5
Alk
026
FASD Starters
MN 45, MN 65
212.6
FASD Starters
MN 80F, MN 110F, MN 140F
5
For selection and product demonstration, please contact any of our branch offices listed below:
L&T House
Group MIG - 5
Padmanabhpur
Durg 491 001
Tel: 0788-2200105, 2322809
Fax: 0788-2210161
A28,lndira Nagar
Faizabad Road
Lucknow 226 016
Uttar Pradesh
Tel: 0522-4040905 / 902 / 903
Fax: 0522-2311671
e-mail: [email protected]
Al
Astronauts Avenue
Bidhan Nagar
Durgapur 713 212
Tel: 0343-2536891 / 952
Fax: 0343-2536493
e-mail: [email protected]
Skybright Bldg.
M.G. Road
Ravipuram Junction
Emakulam
Kochi 682 016
Tel: 0484-2358513, 2358761
Fax: 0484-2358982
e-mail: [email protected]
Radhadaya Complex
Old Padra Road
Near Charotar Society
Vadodara 390 015
Tel: 0265-6613610/11/12
Fax: 0265-2336184
e-mail: [email protected]
48-8-16, Dwarakanagar
Visakhapatnam 530 016
Tel: 0891-2755493, 2704928
Fax: 0891-2746075
e-mail: [email protected]
Product improvement is a continuous process. For the latest information and special applications, please contact any of our offices listed here.
L&T SWITCH
kllir
Electrical Standard Products
Larsen & Toubro Limited
Powai Campus, Mumbai 400 072
Tel: 022-6705 0505
Fax: 022-67051324 / 1746
E-mail: [email protected]
Website: www.LNTEBG.com
SP 01936 R
10407