Scribd Logo
Upload

Welcome to Scribd!

  • 232 views

    Elation Led Manager Quick Start Manual

    Uploaded by

    Arnel Banaga
    This document provides instructions for setting up and configuring the LED Manager 2010 software to control an LED lighting system. It describes installing the software, entering passwords to access hardware settings, loading an RV card configuration file, creating a panel map by inputting the horizontal and vertical layout and connection order, and sending the map to the RV card for storage. It also provides some quick tips for cabling the processor and panels and ensuring proper driver installation and communication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Elation Led Manager Quick Start Manual

    Uploaded by

    Arnel Banaga
    232 views2 pages
    This document provides instructions for setting up and configuring the LED Manager 2010 software to control an LED lighting system. It describes installing the software, entering passwords to access hardware settings, loading an RV card configuration file, creating a panel map by inputting the horizontal and vertical layout and connection order, and sending the map to the RV card for storage. It also provides some quick tips for cabling the processor and panels and ensuring proper driver installation and communication.

    Original Description:

    OUTDOOR LED

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for setting up and configuring the LED Manager 2010 software to control an LED lighting system. It describes installing the software, entering passwords to access hardware settings, loading an RV card configuration file, creating a panel map by inputting the horizontal and vertical layout and connection order, and sending the map to the RV card for storage. It also provides some quick tips for cabling the processor and panels and ensuring proper driver installation and communication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    232 views2 pages

    Elation Led Manager Quick Start Manual

    Uploaded by

    Arnel Banaga
    This document provides instructions for setting up and configuring the LED Manager 2010 software to control an LED lighting system. It describes installing the software, entering passwords to access hardware settings, loading an RV card configuration file, creating a panel map by inputting the horizontal and vertical layout and connection order, and sending the map to the RV card for storage. It also provides some quick tips for cabling the processor and panels and ensuring proper driver installation and communication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    LED Manager 2010 Quick Start Manual

    Please install LED Manager 2010 from the


    .exe file that is provided in the set up CD.
    After installing & launching the software
    proceed to Hardware Settings from the
    Settings menu bar.

    Once in Hardware Settings a window will open


    that will require an alphabetic password
    Elation then a second window will appear
    witch requires a numeric password 888888

    Once in Advanced Hardware Setup


    proceed to Receiving Card and load
    the V9-P7.62.sub file that was
    provided on the elation set up CD.
    After the file has been loaded please
    click on Send to RV Card and finally
    Save to RV Card.
    A confirmation window will appear
    indicating that the file has been sent
    successfully.


    Once the .sub file has been loaded to the
    system then proceed to Screen Correction
    window to create the map.
    1st Please locate the Horizontal Card and
    Vertical Card. These numbers represent the
    number of panels both horizontally as well as
    vertically.
    2nd Next locate panel Num.1 (Panel number 1 is
    the first panel that the processor is connected
    to via cat5).

    3rd You must follow the physical data


    connection in order to map properly.
    4th A typical data connection flow starts on the
    bottom right or bottom left, then proceeds
    horizontally across to then jump up to the next
    row running back across creating a square S
    configuration.

    5th Once the correct map has been created (please review the correct order number located
    on each panel in the map window) click on Send to RV Card and then Save to RV Card.
    This is to ensure that when you power down and then power up the map is stored in the
    system.

    Quick tips.
    1st The Cat5 cable from the processor to the first panel should be on connector LAN 1U.
    2nd Please verify that all data & power jumper cables are connected properly.
    3rd The recommended first cable length should not exceed 300ft.
    4th LED Manager 2010 is best operated in a Windows 32bit platform.
    5th Make sure that the usb driver is properly installed and that communication between the
    processor and the computer is established before mapping process is commenced. (Driver
    will be automatically loaded when software is installed)

    For further assistance please call Elation Support at 323 582 3322 or email us at [email protected]

    You might also like