Power: Sharing With Simplicity
Power: Sharing With Simplicity
Power: Sharing With Simplicity
SHARING
WITH
SIMPLICITY
N
RELEW
EAS
E
DSE8660
AUTO TRANSFER SWITCH & MAINS (UTILITY) CONTROL MODULE
The DSE8660 is an easy-to-use
single or multi-mains controller
with automatic transfer switch
capability. Designed to synchronise
single or multiple DSE8610s with
single or multiple mains (utility)
supplies, the DSE8660 will
automatically control the change
over from mains (utility) to
generator supply or run generators
in synchronisation with the mains
(utility) to provide no-break, peak
lopping and peak shaving power
solutions.
The module can indicate
operational status and fault
conditions on the LCD screen
(multiple languages available), by
lit LED, audible sounder and SMS
messaging. Sophisticated
communications are also
ENVIRONMENTAL
TESTING STANDARDS
ELECTRO MAGNETIC
COMPATIBILITY
BS EN 61000-6-2
EMC Generic Immunity Standard for
the Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for
the Industrial Environment
ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology
Equipment, including Electrical
Business Equipment
TEMPERATURE
BS EN 60068-2-1
Ab/Ae Cold Test -30oC
BS EN 60068-2-2
Bb/Be Dry Heat +70oC
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three major axes
5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz
@ 2gn
HUMIDITY
BS EN 60068-2-30
Db Damp Heat Cyclic 20/55oC @ 95%
RH 48 Hours
BS EN 60068-2-78
Cab Damp Heat Static 40oC @ 93%
RH 48 Hours
SHOCK
BS EN 60068-2-27
Three shocks in each of three major
axes 15gn in 11mS
DSE2130
DSE2157
DSE2548
PC
PC
11
DSENET
EXPANSION
485
RS232 AND
RS485
USB
PORT
USB
HOST
CONFIGURABLE
INPUTS
DC OUTPUTS
DC POWER
SUPPLY 8-35V
232
ETHERNET
DSEPOWER
DSE8660
MSC
8610
8610
8660
7
OTHER
1ph
2ph
3ph
N
N/O VOLT
FREE OUTPUT
BUS
SENSING
VOLTS
1ph
2ph
3ph
N
1ph
2ph
3ph
N
ISSUE 1
DSEPOWER
SHARING
WITH
SIMPLICITY
N
RELEW
EAS
E
DSE8660
AUTO TRANSFER SWITCH & MAINS (UTILITY) CONTROL MODULE
SPECIFICATION
DC SUPPLY
8V to 35V continuous
CRANKING DROPOUTS
Able to survive 0V for 50mS,
providing supply was at least 10V
before dropout and supply recovers
to 5V. This is achieved without the
need for internal batteries
MAXIMUM OPERATING CURRENT
460mA at 12V. 245mA at 24V
MAXIMUM STANDBY CURRENT
375mA at 12V. 200mA at 24V
ALTERNATOR INPUT RANGE
15V AC (L-N) to 333V AC (L-N)
absolute maximum
ALTERNATOR INPUT FREQUENCY
50Hz - 60Hz at rated engine speed
(Minimum: 15V AC L-N)
AUXILIARY RELAY OUTPUTS
Six outputs 2A DC at supply voltage
Two outputs volt free 2A at 250V
FEATURES
Configurable inputs (11)
Configurable outputs (8)
Voltage measurement
RS232 & RS485 remote
communications
Modbus RTU
Multi event exercise timer
Back-lit LCD 4-line text display
Multiple display languages
Automatic start/Manual start
Audible alarm
Fixed and flexible LED indicators
Event log (250)
Fault condition notification to
a designated PC
Front panel mounting
RELATED LITERATURE
DSE8660 Operator Manual
DSE8660 Installation Instructions
DSE8600 PC Configuration Suite Manual
DSE8610 Data Sheet
TELEPHONE
+44 (0) 1723 890099
FACSIMILE
+44 (0) 1723 893303
EMAIL
[email protected]
WEBSITE
www.deepseaplc.com
TELEPHONE
+1 (815) 316 8706
FACSIMILE
+1 (815) 316 8708
EMAIL
[email protected]
WEBSITE
www.deepseausa.com
Ethernet monitoring*
USB Host*
Data Logging & Trending*
* To follow
EXPANSION DEVICES
DSE2548 LED Expansion Module
DSE2130 Input Expansion Module
DSE2157 Output Expansion
Module
DSE124 CAN/MSC Extender
DIMENSIONS
240mm x 172mm x 57mm
9.4 x 6.8 x 2.2
PANEL CUTOUT
220mm x 160mm
8.7 x 6.3
ENCLOSURE PROTECTION
(front of module)
IP65 (with optional gasket)
IP42 (without gasket)
PART NO
057-120
053-070
057-119
055-083