Net Smelter Return

Net smelter return
In this section, the mathematical tools are developed to calculate

the value of a tonne of ore sent to a mill, processed and
concentrated, and sold to a smelter. This section introduces the
concept of the net smelter return (NSR). It discusses the main
components of the equations to calculate NSR, indicating the
Originating
Author:
Dr. George
McIsaac
The contents of this article

have not been peer reviewed
please use information
contained herein with due
diligence
sources of information for each as a function of the design stage. The concept of the NSR factor is
presented, along with its uses, applications and limitations.
A complete example of the calculations for a polymetallic ore is worked through and discussed.
An excel file also is also provided so that the reader can review the equations in detail.
Contents
[hide]
1 Net smelter return

2 Components of the calculations
3 Net smelter return factors
o
3.1 Example:
4 References
Net smelter return

The net smelter return (NSR) refers to the revenues expected from the mill feed, taking into
consideration mill recoveries, transport costs of the concentrate to the smelter, treatment and refining
charges, and other deductions at the smelter.
Components of the calculations

While a few other factors are sometimes mentioned in the literature and in practice, the list presented
here captures 98% of the net smelter return value. Not all items listed are applicable to each metal
concentrate; for this reason, the reader will have to review the references provided at the end of this
section to see where each item applies.
The main factors required for the calculations are:
Recovery factor of the metal at the mill - to know what proportion of the metal sent to the
mill is actually sold.
Concentrate grade - to establish how much metal is contained in a tonne of concentrate.
Transport cost - from the gate at the mine site to the smelter. Associated costs are
charged for loading and representation at port facilities.
Payable metals - to establish the base quantity of metal that the smelter will use to
determine payment. Some deductions are fixed, while others are based on a sliding
scale as a function of the grade of the metal in the concentrate.
Treatment charges - to determine the cost of processing one tonne of concentrate at the
smelter.
Penalties - the extra cost of processing deleterious elements present in the concentrate.
Price participation - a proportional escalator cost to capture large metal price variations
during the contract period.
Refining charges - to determine the cost of refining the metal recovered at the smelter.
At the scoping level, most information can be estimated from spot prices discussed in press releases.
At the Pre-feasibility study level, smelter availability may become an issue and discussions must be
held with a few smelters. Detailed contracts terms are not necessarily determined through these
discussions, but better estimates can be made. Contracts must be discussed with specific smelters
at the feasibility level. Table 1 presents the best information sources for calculating components at
each
of
these
three
stages
of
mine
design.
Table 1: Sources of information at the different stages of the design process

Net smelter return
Scoping
Pre-feasibility
Feasibility
Treatment charges
Spot prices
Discussions with smelters
Negotiated contract
Refining charges
Spot prices
Discussions with smelters
Negotiated contract
Penalties and other deductions
Estimated from experience
Discussions with smelter
Negotiated contract
Transport costs
Spot prices
Discussions with transporter
Negotiated contract
Net smelter return factors

The NSR factors refer to the value a unit of metal grade ($ per gram of gold, $ per % nickel). These
factors can be used in a variety of situations:
Estimate rapidly the value of every block in the resources and reserves models by
multiplying the grades by the factors. The blocks can easily be sorted as required.
Estimate the value of a mining sector for an economical study.
Calculate the revenues of mine plans.
Calculate the value of broken mineralization in the mine to decide whether to send it to
the mill or to waste.
Perform quick metal price sensitivity studies.
There are many advantages to this approach:
Polymetallic ores grades are rapidly converted to dollars per tonne.
The value of reserves can be quickly compared to the applicable costs to determine
their viability; cut-off grades become cut-off NSRs.
At the design stage, spreadsheets can be used to quickly identify economical reserve
blocks.
During the extraction of a sector, its value can be quickly estimated by comparing the
reconciled grades to the design.
The effect of commodity price fluctuations can be evaluated quickly.
The method does have some limitations:
This approach tends to smooth out the statistical distribution of the block values. This
will happen if the metal recovery at the mill is proportional to the feed grade. This way,
lower grade blocks are over-valued and higher grade blocks are undervalued.
This approach is valid only within the operating parameters of the mill.
Example:
Lets assume that chalcopyrite and sphalerite produced in the mine are sent to a mill with copper and
zinc flotation circuits, and that the copper concentrate is sold to two smelters and that the zinc
concentrate is sold to a zinc smelter. The detailed calculations can be found in the Excel file NSR
calculations.xlsx.
Figure
1:
The
milling
process
In this example, the mill feed is 275,000 tonnes grading 2.32% Cu, 2.55 g/t Au, and 5.69% Zn. This
mill feed can represent three months or a years production from the mine, or is the grade of a sector
on which an economical study is conducted. Either way, the NSR factors calculated for this feed can
be
applied
to
every
individual
reserve
blocks
or
stopes
to
calculate
their
value.
As shown in Table 2, copper and gold are recovered in the copper concentrate and zinc and minor
gold are recovered in the zinc concentrate. The copper concentrate grades 21% and the zinc con
grades
53%.
Values
marked
in
yellow
are
given
and
others
are
calculated.
Table
2:
Metallurgical
balance
Table 3 details the steps to calculate the value of the copper and gold in the copper concentrate sold
to smelter A. In the case of copper:
A fixed deduction of 1.1 units (22.05 lbs * 1.1) is charged.
The treatment charge is equal to $75 per tonne of concentrate. Transport, with loading
and representation, cost $39 per tonne.
The refining charges are equal to $0.075 per pound of payable copper.
As for gold:
The metal deduction is equal to 2.5 grams. This deduction can be based on a sliding
scale set as a function of the concentrate gold grade.
No treatment or transport costs are applied. This is a judgment call on the part of the
user to decide if the costs apply or not and in which proportions they do. In the example,
it is assumed that this is the amount of gold present (or absent) in the ore and
concentrate will have no influence on the treatment and transport costs of the copper
concentrate and that therefore the gold should not have to pay for that portion of costs.
Refining charges are equal to $6 per payable ounce of gold.
As a result, the copper and gold net smelter returns for copper concentrate sold to Smelter A are
equal to $511 and $515 per tonne of concentrate, or $48.01 and $48.37 per tonne of ore. When
these numbers are divided by the mill feed grade, the copper and gold NSR factors are equal to
$20.69
per %
Cu
and
$18.97
per
gram
of
gold.
Table 3: Estimation of the value of metals in the copper concentrate sold to smelter A
The exercise is repeated for copper concentrate sold to smelter B and zinc concentrate sold to
smelter
C,
and
the
results
are
combined
in
Table
4.
Table 4: Compilation of NSR returns
These factors can be used to estimate the value of reserve blocks, stopes, daily production, or the
average
value
of
the
mill
feed,
as
shown
in
Table
5.
Table 5. Net Smelter Return of mill feed
References
Goldie, R. A. (1992). Net smelter return models and their use in the exploration, evaluation and
exploitation of polymetallic deposits. Ore Deposit Models V. II, Geoscience Canada Reprint Series
6, (pp. 63-75). This reference gives clear information on the components included in the equations
for many metal concentrates.
Goldie, R. J. (1996). The dollar: An economic geologist's most important unit of measurement. CIM
Bulletin , 89 (997), pp. 39-41.
Lafleur, P.-J. (1988, November ). Statistical Geology. The Northern Mining Magazine, 25-29. This
reference gives an example of an NSR factor calculation for a polymetallic ore.

Net Smelter Return

Uploaded by

Copyright:

Available Formats

Net Smelter Return

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Net Smelter Return

Uploaded by

Copyright:

Available Formats

What are the main components used to calculate net smelter return (NSR)?

What are the main components used to calculate net smelter return (NSR)?

How are NSR factors used?

How are NSR factors used?

Net smelter return

In this section, the mathematical tools are developed to calculate

The contents of this article

1 Net smelter return

Net smelter return

Components of the calculations

Concentrate grade - to establish how much metal is contained in a tonne of concentrate.

Table 1: Sources of information at the different stages of the design process

Discussions with smelters

Discussions with smelters

Penalties and other deductions

Estimated from experience

Discussions with smelter

Discussions with transporter

Net smelter return factors

Estimate the value of a mining sector for an economical study.

Calculate the revenues of mine plans.

Perform quick metal price sensitivity studies.

There are many advantages to this approach:

Polymetallic ores grades are rapidly converted to dollars per tonne.

The effect of commodity price fluctuations can be evaluated quickly.

The method does have some limitations:

A fixed deduction of 1.1 units (22.05 lbs * 1.1) is charged.

Refining charges are equal to $6 per payable ounce of gold.

Table 4: Compilation of NSR returns

Table 5. Net Smelter Return of mill feed

You might also like