Miteq Tech Note 25t020

MITEQ TECHNICAL NOTE 25T020
MARCH 1996
REV B
ENHANCED AUTOMATIC FREQUENCY CONTROL

FOR
INMARSAT EARTH STATIONS
_________________________
1.0 INTRODUCTION
The purpose of this document is to explain the principles of operation of an enhanced AFC
receiver for INMARSAT.
Summary
The EAFC system is designed such that:
1. The frequency of the carrier transmitted from the earth station to the
mobile terminal is correct as it leaves the satellite.
2. The frequency of the received carrier demodulated at the earth
station is correct.
2.0 THE PURPOSE OF AFC
A system such as INMARSAT transmits information in a series of closely spaced narrowband
carriers. Each carrier represents one phone circuit. Shifting this series of carriers off
frequency by even a few kHz would cause unacceptable distortion of the received information.
The purpose of Automatic Frequency Control is to eliminate these frequency shifts.
3.0 CAUSES OF FREQUENCY ERROR

When a satellite is placed in geosyn-chronous orbit, the satellite remains at a fixed equatorial
longitude. If the geosynchronous satellite is placed so that it is directly over the equator, the
latitude of the satellite will also
remain constant. This
geosynchronous satellite at 0
degrees latitude is called
geostationary. While the
geostationary orbit is the ideal
place to have a satellite, in reality,
the effects of the sun and the
moon quickly pull the satellite out
of a geostationary orbit. In a
geosynchronous orbit with latitude
other than 0 degrees, the satellite
moves back and forth across the
equator over the course of the
day. The path of the
geosynchronous satellite has
the shape of a figure eight and has
a period of one day.
Figure 1. Satellite Movement

The most significant aspect of the satellites figure eight motion is its North/South movement.
As seen from an earth station, this movement results in a continuously changing distance
between the earth station and
the satellite (range).
This changing distance
produces a Doppler effect
(frequency shift) on the signals
being transmitted to
and received from the satellite.
Earth stations in different
locations will experience
different amounts of
Doppler effect. Since Doppler
is a function of wavelength,
carriers at different frequencies
will be shifted by different amounts.
Figure 2. Satellite Range
4.0 THE INMARSAT EAFC SYSTEM

The hardware consists of:
A. A main earth station transmitting a
pilot signal.
B. A secondary earth station using the
pilot as a reference and handling
communications traffic.
C. A mobile terminal generating
communications traffic.
D. A satellite relaying all this
information.
Figure 3. INMARSAT EAFC
There are a number of frequency errors generated:

1. A Doppler shift on the pilot signal transmitted from the main station (A)
to the satellite (D).
2. A frequency translation error on the pilot signal in the satellite (D).
3. A Doppler shift on the pilot signal transmitted from the satellite (D) to
the secondary station (B).
4. A Doppler shift on the communications signal transmitted from the
secondary station (B) to the satellite (D).
5. A frequency translation error on the communications signal in the
satellite (D).
6. A Doppler shift on the communications signal transmitted from the
satellite (D) to the mobile terminal (C).
The following statements apply:
The primary earth station (A) and the secondary earth station
(B) are each independently able to generate accurate, stable,
on-frequency signals.
Frequency translation error on the pilot signal (2) and frequency

translation error on the communications signal (5) are both
produced by the same piece of equipment (Satellite D). The
change in frequency on the pilot signal is the same as the change
in frequency of the communications signal.

The Doppler shift on the communications signal transmitted from the satellite (D)
to the mobile terminal (C) (frequency error 6) is corrected for at the mobile
terminal (C). The earth stations (A&B) cannot detect this Doppler shift. The
communications signals transmitted from the mobile terminal (C) to the satellite
(D) are at the correct frequency as they enter the satellite (D) because of
corrections made at the mobile terminal (C).
The goal of the EAFC system is to ensure:
That the communications signals transmitted from the satellite (D)

to the mobile terminal (C) are at the correct frequency when they
leave the satellite (D).
That the communications signals transmitted from the mobile

terminal (C) to the satellite (D) are at the correct frequency at
the earth station (B) demodulators.
5.0 CALCULATION OF THE FREQUENCY CORRECTIONS AT THE SECONDARY

EARTH STATION
The secondary earth station starts with the following information:
a)
b)
c)
d)
e)
Location of itself (latitude and longitude)

Location of the primary earth station (latitude and longitude)
Location of the satellite (longitude)
Time of day
Uncorrected frequency of the pilot signal
The pilot receiver in the secondary earth station monitors the frequency of the pilot
signal transmitted from the primary earth station for a minimum of 24 hours. These
data are then analyzed to determine the average error and the periodic error.
The average error is the
frequency translation error
of the satellite.
The periodic error is the
combined Doppler shift
(primary earth station to the
satellite and satellite to the
secondary earth station).
Figure 4. Received Pilot Error

Knowing the combined Doppler shift, the locations of the earth stations, and the
frequencies being used, the Doppler shift for signals transmitted from the secondary
earth station to the satellite can be calculated.
The terms for the Doppler shift for signals transmitted from the secondary earth
station to the satellite and the satellite frequency translation error are used to correct
the communications carriers transmitted from the secondary earth station.
In a similar manner, correction terms are calculated for communications carriers
transmitted from the satellite to the secondary earth station.
Since the average error and the peak-to-peak periodic error will change slowly over
long periods of time, the pilot receiver continuously monitors the pilot frequency and
uses the most recent data in calculating correction factors.
6.0 GRAPHICAL COMPARISON OF AFC AND EAFC
Figures 5 and 6 represent the frequency plan for the earth station uplink. Figures 7
and 8 represent the frequency plan for the earth station downlink.
In the non-enhanced AFC, Figures 5 and 7, the Doppler shifts experienced by the
satellite links are ignored. This is a 1:1 relationship between the received pilot error
and the correction frequency. An analog, phase-locked system may be used to
impliment this type of AFC. Note that on the down link, a separate uncorrected
downconverter channel is required to feed the analog pilot receiver.
In the enhanced AFC (EAFC), Figures 6 and 8, a number of calculations must be
performed to extract the Doppler information from the received pilot signal. There is
not a 1:1 relationship between the received pilot error and the correction frequency.
This type of enhanced AFC is best implimented in a digital system. Note that on the
down link, a separate, uncorrected downconverter channel is not required. The digital
pilot receiver is able to take the correction frequency into account when measuring the
pilot frequency.
Cum ulative Frequency Shift

Ref.
Item
Port
C Band Pilot Generator
Output
Satellite Link
C Band to L Band
Input
Output
+1
L Band Down Converter
Input
+1
Output
+1
Pilot Receiver
Input
+1
Output
-1
Input
Frequency
0
Notes:
The satellite links represented by B and F
are the sam e physical equipm ent
being operated at different frequencies.
The Cum ulative Frequency Shift chart

defines the frequency translation error
of the satellite link as
one unit of frequency shift.
C Band Up Converter
L.O.
Output
-1
-1
Satellite Link
C Band to L Band
Input
-1
Output
L Band Term inal
Input
0
Uncorrected
IF Input
(From M odulators)
A
C Band
Pilot
Generator
B
C Band
to
L Band
C
L Band
Down
Converter
L.O.
Pilot
Receiver
E
C Band
Up
Converter
F
C Band
to
L Band
G
L Band
Term inal
INMARSAT Coast Earth Station Uplink Frequency Correction

( C to L AFC )
Figure 5. AFC Uplink
Cumulative Frequency Shift

Ref.
A
1
D
3
B
B
B
4
D
6
C
Item
Port
C Band Pilot Generator
Output
Satellite Link
C Band Doppler Shift
Input
Output
+1
Satellite Link
C Band to L Band
Input
+1
Output
+1+D
Satellite Link
L Band Doppler Shift
Input
+1+D
Output
+1+D+3
L Band Down Converter
Input
+1+D+3
Output
+1+D+3
Input
+1+D+3
Output
-D-4
C Band
Pilot
Generator
Coast Earth Station

Aeronautical Uplink
Frequency Correction
Pilot Receiver
Input
C Band Up Converter
-D-4
Output
-D-4
Input
-D-4
Output
-4
Satellite Link
C Band to L Band
Input
-4
Output
Satellite Link
Input
Output
+6
L Band Terminal
Input
+6
Uncorrected
IF Input
(From Modulators)
Secondary Earth Station
1
C Band
to
L Band
( C to L
L.O.
Satellite Link
Primary Earth Station
INMARSAT
Frequency
B
L Band
Down
Converter
L.O.
Pilot
Receiver
B
C Band
Up
Converter
EAFC )
6
C Band
to
L Band
C
L Band
Terminal
Figure 6. EAFC Uplink

Ref.
Item
Port
L Band Pilot Generator
Output
Satellite Link
L Band to C Band
Input
Output
+1
C Band Down Converter
Input
+1
First Conversion
Output
+1
D
E
Input
+1
Uncorrected Second Conversion
Output
+1
Input
+1
Output
-1
Input
+1
L.O.
-1
Pilot Receiver

Corrected Second Conversion
A
L Band
Pilot
Generator
Output
Frequency
Notes:
The Cumulative Frequency Shift chart
defines the frequency translation error
of the satellite link as
one unit of frequency shift.
L Band
to
C Band
Corrected IF Output
( To Demodulators )
L.O.
C Band
Down
Converter
E
Pilot
Receiver
INMARSAT
Coast Earth Station Downlink Frequency Correction

( L to C
AFC )
Figure 7. AFC Downlink

Ref.
A
C
1
6
D
3,4
B
B
B
Item
Port
L Band Pilot Generator
Output
Pilot
Traffic
Frequency
Frequency
INMARSAT
Coast Earth Station

L Band Terminal
Output
-6
Satellite Link
Input
Output
+1
Satellite Link
Input
Output
Satellite Link
Input
+1
C Band to L Band
Satellite Link
Output
+1+D
+D
Input
+1+D
+D
Output
+1+D+3,4
+D+3,4
Input
+1+D+3,4
+D+3,4
L.O.
(see note)
-D-3,4
Output
(see note)
Input
+1+D+3,4
Output
-D-3,4
Aeronautical Downlink
-6
Frequency Correction
( L to C
EAFC )
Notes:
Pilot Receiver
Input
Demodulators
D
Primary Earth Station
3,4
L Band
to
C Band
L Band
Pilot
Generator
Secondary Earth Station
A
6
The downconverter output to the pilot receiver

is frequency corrected. The pilot receiver
calculates the uncorrected frequency.
L.O.
B
C Band
Down
Converter
B
Pilot
Receiver
Demodulators
L Band
Terminal
Figure 8. EAFC Downlink
M:\TECHNOTE\25T020.DOC

Miteq Tech Note 25t020

Uploaded by

Copyright:

Available Formats

Miteq Tech Note 25t020

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Miteq Tech Note 25t020

Uploaded by

Copyright:

Available Formats

MITEQ TECHNICAL NOTE 25T020

ENHANCED AUTOMATIC FREQUENCY CONTROL

3.0 CAUSES OF FREQUENCY ERROR

Figure 1. Satellite Movement

4.0 THE INMARSAT EAFC SYSTEM

There are a number of frequency errors generated:

Frequency translation error on the pilot signal (2) and frequency

in frequency of the communications signal.

The goal of the EAFC system is to ensure:

That the communications signals transmitted from the satellite (D)

That the communications signals transmitted from the mobile

5.0 CALCULATION OF THE FREQUENCY CORRECTIONS AT THE SECONDARY

Location of itself (latitude and longitude)

Figure 4. Received Pilot Error

Cum ulative Frequency Shift

C Band Pilot Generator

L Band Down Converter

The Cum ulative Frequency Shift chart

L Band Term inal

INMARSAT Coast Earth Station Uplink Frequency Correction

Cumulative Frequency Shift

C Band Pilot Generator

L Band Down Converter

Coast Earth Station

Secondary Earth Station

Primary Earth Station

Figure 6. EAFC Uplink

Cumulative Frequency Shift

L Band Pilot Generator

C Band Down Converter

C Band Down Converter

Uncorrected Second Conversion

C Band Down Converter

Coast Earth Station Downlink Frequency Correction

Figure 7. AFC Downlink

Cumulative Frequency Shift

L Band Pilot Generator

Coast Earth Station

L Band Doppler Shift

L Band Doppler Shift

C Band Doppler Shift

C Band Down Converter

Secondary Earth Station

The downconverter output to the pilot receiver

Figure 8. EAFC Downlink

You might also like