AEROSPACE ENGINE DATA

Data for some concrete aerospace engines and their craft ................................................................................. 1
Data on rocket-engine types and comparison with large turbofans ................................................................... 1
Data on some large airliner engines ................................................................................................................... 2
Data on other aircraft engines and manufacturers .......................................................................................... 3

In this Appendix common to Aircraft propulsion and Space propulsion, data for thrust, weight, and specific fuel
consumption, are presented for some different types of engines (Table 1), with some values of specific impulse
and exit speed (Table 2), a plot of Mach number and specific impulse characteristic of different engine types
(Fig. 1), and detailed characteristics of some modern turbofan engines, used in large airplanes (Table 3).

DATA FOR SOME CONCRETE AEROSPACE ENGINES AND THEIR CRAFT

Table 1. Thrust to weight ratio (F/W), for engines and their crafts, at take-off*, specific fuel consumption
(TSFC), and initial and final mass of craft (intermediate values appear in [kN] when forces, and in
tonnes [t] when masses).
Engine
Engine
TSFC
Whole craft
Whole craft
Whole craft mass,
type
thrust/weight
(g/s)/kN
type
thrust/weight
mini/mfin
Trent 900
350/63=5.5
15.5
A380
4350/5600=0.25
560/330=1.8
cruise 90/63=1.4
cruise 490/5000=0.1
CFM56-5A
110/23=4.8
16
A320
2110/770=0.29
77/50=1.5
cruise 25/23=1.1
cruise 225/700=0.1
Flyer-I engine
0.6/0.8=0.8
2
Wright Flyer
0.6/3.5=0.17
0.35/0.35=1
Olympus 593
169/31=5.4
33.8
Concorde
4169/1830=0.37
180/90=2
**
EJ200
90/10=9.0
23
Eurofighter
290/220=0.8
22/11=2
Ariane 5 (1st)
6500/2800=2.3
240
Ariane V
26500/7700=1.7
750/(16+3)=40
SME (cryogen)
2300/32=72
230
SRB (solid)
12500/5700=2.2
380
Space Shuttle
29 000 / 20 000=1.5 2000/(104+29)=15
Saturn V (1st)
34000/23000=1.5
390
Saturn V
34 000/30 000=1.1 3000/(118+13)=23
*
Notice that at lift-off, neither Lift=Weight (really L<W in aircraft because thrust contributes, and L>W in
rockets), nor drag equals thrust, but at cruise (on level flight) L=W and D=F.
**
TSFC is csp=49 (g/s)/kN with post-combustion.

DATA ON ROCKET-ENGINE TYPES AND COMPARISON WITH LARGE TURBOFANS

Table 2. Exhaust speed ( ve = F m p )*, specific impulse (Isp=vs/g), typical thrust F range, delta-v, and thrust-toweight ratio (F/W), for different rocket engines, and comparison with turbofans (Wiki).
Type of
Exit speed
Specific impulse
Typical thrust
Delta-v
Thrust /
rocket engine
ve [m/s]
Isp [s]
F [N]
v [m/s]
Weight
Large turbofan
-cruise
65 000**
6500
(30..100)103
1.4
**
3
-take-off
65 000
6500
(100..400)10
5.5
Solid fuel
Aerospace engine data

2500..3000

250..300

103..107

7000

2..100
1

Liquid
monopropellant
Liquid
bipropellant
Electrothermal
(electric arc)
Electrodynamic

2000..3000

200..300

10-1..102

3000

2..100

3000..5000

300..450

10-1..107

9000

2..100

5000..15 000

1000..1500

10-2..101

<10-3

500..5000

<10-4

Electrostatic
20 000..200 000
2000..50 000
10-3..101
>100 000
<10-4
ionic thruster
Hall effect
10 000..50 000
2000..5000
10-3..101
>100 000
ionic thruster
Electrospray
~10 000
~1000
10-9..10-3
?
ionic thruster
*
Only exact for adapted nozzle, i.e. when pe=p0 in F =m p ve + Ae ( pe p0 ) , but approximate in any case.
**
For turbofan engines this is not the real exit speed, which is <300 m/s, but the equivalent or effective exit
speed, ve = F m p , corresponding to the specific thrust per unit of propellant flow-rate, which with the
approximation of neglecting the small pressure term explained above, coincides with the real exhaust speed in
rocket engines.

Fig. 1. Specific impulse, Isp F ( m f g ) =1(gcsp), of different engines types (csp is TSFC). (Wiki).

DATA ON SOME LARGE AIRLINER ENGINES

Table 1 presents characteristics of some modern turbofan engines, used in large airplanes. Airliners are
commercial aircraft with more than 10 passengers, usually grouped by capacity as:
<100 pax, low-haul or regional airliners, with cabin diameter D<3 m.
100..250 pax, medium-haul or narrow-body or single-aisle airliners, with cabin D=4..5 m. Typical
models and motorization are: B727 (370 kN engines), B737 (290 kN engines), A320 (2100 kN
engines), MD80 (2100 kN engines)...
>250 pax, long-haul or wide-body or double aisle airliners (or jumbos), with cabin D=5..6 m. Typical
models and motorization are: B747 (4250 kN engines), DC10 (3200 kN engines), A340 (4150 kN
engines), A330 (2300 kN engines), B787 (2150 kN engines), A380 (4350 kN engines), A350
(2200 kN engines).
Aerospace engine data
2

Engine
Parameter
Thrust Fmax [kN]
(FcruiseFmax/4) /
Bypass ratio,
Pressure ratio,
Fan pressure ratio,
Dry weight, We [kg]
Length [m]
Fan diameter [m]
Fan-compressor stg.
Turbine (HP-LP) stg.
Fmax/Weng
mf, takeoff [kg/s]
mf, cruise [kg/s]
Pprop, takeoff [W]=Fv
Pprop, cruise [W]=Fv
mair, takeoff [kg/s]
mair cruise [kg/s]
Tmax [K]
EGTmax [K]
Spool speeds [rpm]

Table 3. Characteristics of some modern airliner engines.

CFM56-5A1
PW4000
CFM56-5C
Trent 900
A320 2x
A330 2x
A340 4x
A380 4x
110
300
150
350
30
40
80
6.0
5.1
6.4
8.4
31.3
32
37
39
1.55
1.7
2270
3990
6300
2.4
4
2.6
4.5
1.7
2.5
1.8
3
1+3+9
1+4
4.8
3.8
5.5
1.7
2.3 (100 MWLHV) 5.5 (240 MWLHV)
0.4
0.5 (20 MWLHV)
1.1 (50 MWLHV)
11070=8 MW
15070=10 MW
35070=24 MW
25250=6 MW
35250=9 MW
80250=20 MW
426
850
500
1200
1540
1150
N1=5 100
N2=15 200

GP7200
A380 4x
350
75
8.7
41
6700
4.7
3.2

5.2

1350

1800
N1=4 000
N2=10 000

Machcruise
0.80
0.83
*
TSFC [(g/s)/kN]
16
Unit price
*
TSFC at cruise; take-off values are some 10 % lower.

0.80
15.4

N1=3 000
N2=7 500?
N3=12 500
0.83
15.5

1250
N1=3 000
N2=13 000

15.6
10 million

Data on other aircraft engines and manufacturers

The turbofan engine market is dominated by General Electric (GE), Rolls-Royce (RR), CFM (a joint venture of
Snecma and GE), and Pratt & Whitney (PW), in order of market share. There are other joint ventures, like
International Aero Engines (IAE) by RR, PW, and MTU, specializing in engines for the A320 family, or
Engine Alliance (EA) by PW and GE, specializing in engines for the A380. Williams International is the world
leader in smaller business jet turbofans.
Rolls Royce
Trent 900, four units used in A380 (the largest airliner, with >500 pax). Rolls Royce is leader, with ITP
(Industria de Turbo Propulsores) contributing the low pressure turbine driving the fan, Hamilton Sundstrand
(electronic engine controls), Avio S.p.A. (gearbox module), Marubeni Corporation (engine components), Volvo
Aero (intermediate compressor case), Goodrich Corporation (fan casings and sensors), and Honeywell
(pneumatic systems). Trent 900 has three spools, being based on RR-RB211 (the first 3-spool engine), a 24
hollow-titanium swept-blade fan, an eight-stage IP compressor, a six-stage HP compressor, single-stage HP
Aerospace engine data

turbine, single-stage IP turbine, and five-stage LP turbine (the HPC-HPT-shaft is contra-rotating). The burner is
annular with 20 injectors. The Trent 900 engines used on the Airbus A380 are designed to fit into a Boeing
747-400F freighter for transport. The Trent 1000 engine is being developed for the Boeing 787 Dreamliner.
More advanced but same size and three-shaft architecture, Trent XWB, 400 kN, will power the A350 (2x) by
end 2014.
RR Olympus 593 powered Concorde (two engines),which was the only commercial supersonic airliner (M=2).
air =190
It was a pure turbojet with afterburner, with a take-off thrust of FTO=180 kN, and air flow rate of m
kg/s; at cruise, Fcruise=50 kN, pressure ratio of 23=11, and TSFC=34 (g/s)/kN.
Pratt & Whitney
GP7200, four units used in A380, from Engine Alliance (PW & GE), based on PW4000 and GE90. Two spools.
Hollow-titanium 24 swept wide-chord hollow titanium fan blades, with 8.7:1 by-pass ratio; five-stage lowpressure axial compressor; nine-stage high-pressure axial compressor, low-emissions single annular combustor,
two-stage high pressure turbine, six-stage low-pressure turbine, boltless architecture, single crystal blades, split
blade cooling and thermal barrier coatings.
PW4000 (2 units in A330, for 250..350 pax; 4 units in B747-400, for >400 pax), bypass ratio 5:1, fan diameter
Df=2.5 m, pressure ratio fan=1.7, total=32, 4 m long engine, take-off thrust 300 kN (90 kN at 12 km altitude),
LP-shaft at 4000 rpm with 4 turbine-stages, HP-shaft at 10 000 rpm with 2 turbine-stages. Only 12% of total
thrust is due to primary exhaust. Overall engine efficiency is =0.35.
PW1000G family (from 2015) is intended for regional airline turboprops, with F=50..200 kN, bypass =12, fan
diameter Df=2.1 m, with a gear stage to slow fan spinning, decreasing noise by 30 %.
Old Pratt & Whitney JT8D engine (used in B727, DC-9, MD-80, B737...), had a mass of 1500 kg, FTO=100 kN,
air =150 kg/s, total=16, TSFC=21 (g/s)/kN. There were nine
bypass ratio =0.96, fan diameter Df=1.25 m, m
combustion chambers positioned in a can-annular arrangement, each with three air inlet hole sizes: the smallest
was for cooling, the medium for burning, and the large for forming an air blanket.
CFM International
CFM International is a joint venture between GE Aviation USA and Snecma (France), formed in 1974 to build
and support the CFM56 series of jet engines. The names of CFM International and the CFM56 product line are
derived from the two parent companies commercial engine designations: GE's CF6 and Snecma's M56. Up to
2011, more than 23 000 engines were produced. GE is responsible for the high pressure compressor, combustor
and high pressure turbine, while Snecma is responsible for the fan, low pressure turbine, the gearbox, and the
exhaust.
The CFM56 successor, the CFM Leap engine (2x for the new A320neo) has 150 kN, BPR=11:1, OPR=40:1,
Dfan=2 m, compressor stages (fan/LPC/HPC) of 1:3:10, turbine stages (HPT/LPT) 2:7.
Aerospace engine data

MTU Aero Engines

MTU is a German aircraft engine manufacturer and international partner to PW (e.g. in PW4000), GE-EA (e.g.
GP7200), Eurojet (EJ200), and Europrop (TP400).
Europrop International GmbH (EPI) is a joint venture among four European aero-engine manufacturers (MTU,
Snecma, Rolls-Royce, and ITP) with just one product: the Europrop TP400-D6 turboprop of 8200 kW,
developed for the Airbus Military A400M aircraft (MTOM=141 000 kg). The TP400 is the most powerful
single-rotation turboprop (and the third most powerful turboprop after the contra-rotating Kuznetsov NK-12
and Progress D-27). The engine has a twin-spool gas generator, with a third coaxial shaft connecting the low
pressure power turbine to the 5.3 m diameter propeller (with eight blades made of composite), via an offset
reduction gearbox. It has meng=1900 kg, Wshaft meng =4.4 kW/kg, OPR=25, TET=1500 K, with a prop-torque of
100 kNm and a BSFC=0.24 kg/kWh (the engine efficiency is e=1/(hLHVBSFC)=0.35, and a fuel consumption
of m f =0.54 kg/s at maximum power. The IP compressor has five stages, and the HP compressor six. Both the
HP and IP turbines are single stage, and the LP power turbine has three stages.
Back to Propulsion

Aerospace engine data