LEP Web

Vorspann
12.09.2006
23:39 Uhr
Seite 1
PHYSICS
L A B O R AT O R Y E X P E R I M E N T S
Vorspann
12.09.2006
23:39 Uhr
Seite 2
Dear customer,
this catalogue of physics laboratory experiments for universities, colleges, high schools etc. is a valuable and
extensive work of scientific literature for experiment-oriented education purposes. It includes numerous successful
and classical experiments playing an essential role in every physics laboratory course. The experiments have been
field-tested over and over again and countless enthusiastic customers all over the world have been inspired
by them.
Our team of experienced scientists has set great store on using both classical equipment, such as oscilloscopes,
recorders etc., and modern interface systems like our Cobra3 system for the experiments. This is why you will often
find several versions for one experiment. Just choose the experiment version which best meets your specific
requirements.
If you need help in selecting the right experiments, our sales representatives in your country would be more than
happy to assist you.
We hope you enjoy our manual and look forward to your questions.
Phywe Systeme GmbH & Co. KG
PHYWE Systeme GmbH & Co. KG

Robert-Bosch-Breite 10
D-37079 Gttingen Germany
Phone + 49/551/604- 0
Fax
+ 49/551/604 -115
www.phywe.com
[email protected]
About Phywe
Founded in Gttingen, Germany in 1913 by Dr. Gotthelf Leimbach, Phywe Systeme GmbH & Co. KG quickly advanced
to one of the leading manufacturers of scientific equipment.
Over this period of more than 90 years Phywe has been putting quality and innovation into its products as a
fundamental requirement.
As a well known international supplier in the fields of science and engineering we have made a significant impact on
the market through high quality equipment.
Phywe products are made in Germany and in use throughout the world in the fields of education und research, from
primary schools right through to university level.
Up-to-date educational systems, planning and commissioning of scientific and engineering laboratories to meet
specific requirements are our daily business.
As a supplier of complete, fully developed and established systems, Phywe provides teaching and learning systems
for students as well as teacher demonstration experiments. The system ranges from simple, easy to operate
equipment intended for student use up to coverage of highly sophisticated and specialised university equipment
demands.
Phywe Systeme GmbH & Co. KG has achieved a very high standard based on research and technology and through
exchange of experiences with universities and high schools as well as with professors and teachers.
As experienced and competent manufacturer, we would gladly assist you in the
selection of the "right" experiments for your particular curricula.
Mechanics
Phywe
in the University City of Gttingen
Measurement techniques
Natural sciences have a longstanding

tradition in Gttingen. More than 40 Nobel
prizewinners coming from all sorts of
scientific disciplines and numerous university
institutes successfully conduct research in
practically all areas of science.
The following research institutions and

university institutes are located in Gttingen:
Academy of Science, several Max-Planck
institutes, the German Primate Centre, the
Centre of Molecular Physiology of the Brain,
the Centre of Molecular Life Science
to name just a few.
We are in contact with these institutions and

exchange our views with them to ensure that
the latest trends and scientific innovations
are always reflected in the product range of
Phywe Systeme GmbH & Co. KG.
A Center of Natural Sciences in Germany
Nobel Price winner

Prof. Otto Hahn visiting
PHYWE in 1966
GTTINGEN is a city of teaching and research. Scientific equipment, teaching

equipment and laboratory installations developed and produced in this city are famous
throughout the world.
Gttingen would not be what it is without its university.
Georgia Augusta was founded in 1734 and by 1777 it was Germanys largest
university, with 700 students. It still is one of the leading universities in Germany, with
14 faculties, significant scientific facilities and more than 30,000 students.
The gracious Goose Girl (Gnseliesel) on the market place well is the most kissed girl
in Germany. Why? Because every newly graduated doctor must kiss the cold beauty on
her bronze mouth. That is Gttingen tradition.
Doctors kiss for the Goose Girl
catalogues, brochures
and more
PHYSICS CHEMISTRY BIOLOGY
The comprehensive catalogue for physics, chemistry
and biology. Additionally you can find a large number of
laboratory materials and an insight in our particularly
successful teaching systems TESS, Cobra3 and
Natural Sciences on the board.
Available in English and Spanish.
Laboratory Experiments
The experiments in the Phywe publication series Laboratory Experiments
are intended for the heads of laboratories,
colleges of advanced technology, technical
colleges and similar institutions and also
for advanced courses in high schools.
Laboratory Experiments Physics is
also available on CD-ROM.
Available in English.
For the student system Advanced Optics
and Laser Physics a special brochure
is available in English.
Special brochures
Additionally there are special brochures for our particularly successful
teaching systems TESS (available in
German, English, French and Spanish),
Cobra3 (available in German, English)
and Natural Sciences on the board
(available in German, English).
Phywe is uncomplicated
Handbooks
Physics
To help you in selecting your experiments, we have added pictograms to several of our experiments.
These pictograms give you a quick overview of the most important features of the experiments and provide
you with all the essential information at a glance.
New Products
New products which have been launched in the last few months. Here
you will also find particularly successful experiments with new additional
features to offer you even more measurement and experiment
possibilities.
Our Best-Sellers
Particularly successful and reliable products which have been field-tested
over and over again in numerous countries - some for many years. We
would be more than happy to provide you with references upon request.
Computer-Assisted Experiments with our

Cobra3 PC Interface
A large number of experiments can be performed in a particularly comfortable and elegant way with the help of our Cobra3 measurement interface. All you need is a PC. The advantage is that you can process the data
particularly well using a PC.
PC interfaced instruments
Some Phywe devices already have an interface included.
These instruments can be connected directly to a PC where you can use
the Phywe measure Software to work with the data.
PHYWE Systeme GmbH & Co. KG D - 37070 Gttingen
Laboratory Experiments Physics 5
Laboratory Experiments, Physics

The experiments in the PHYWE Publication Series Laboratory Experiments Physics are intended for the
heads of physics laboratory courses at universities, colleges of advanced technology, technical colleges and
similar institutions and also for advanced courses in high schools.
All experiments are uniformly built-up
and contain references such as
Related topics and Principle and task
to introduce the subject.
Theory and evaluation states full theory
involved and shows graphical and numerical
experimental results including error calcules.
Picture and
Equipment List guarantee time-saving
and easy conducting of the experiment.
LABORATORY EXPERIMENTS
PHYSICS
Klaus Hermbecker
Ludolf von Alvensleben
Regina Butt
Andreas Grnemaier
Robin Sandvo
Example of
measurement
parameters
Experimental literature
16502.12
Laboratory Experiments Physics
6 Laboratory Experiments, Physics
Print Version
No. 16502.32
CD
No. 16502.42
Laboratory Experiments, Physics

The present volume which has been developed by PHYWE, complements the previously existing collection
of about 230 experiments in twenty-six chapters as the following comprehensive Table of Contents shows.
In this brochure we present the experiments in short form. The experiments can be ordered or offered
completely or partially, if desired, in accordance with the Comprehensive Equipment Lists. On request, we
will gladly send you detailed experimental descriptions.
You can order the experiments as follows:

You
Whatcan
you order
need: the experiments as follows:
Didactically adapted descriptions of

experiments easy,
direct preparation
by the students is
possible
Hall effect module,
11801.00
Hall effect, p-Ge, carrier board
11805.01
1
1
Coil, 600 turns
06514.01
Iron core, U-shaped, laminated
06501.00
Pole pieces, plane
06489.00
Hall probe, tangent., prot. cap
13610.02
Power supply 0-12 V DC/6 V, 12 V AC
13505.93
Tripod base -PASS-
02002.55
Support rod -PASS-, square, l = 250 mm
02025.55
Right angle clamp -PASS-
02040.55
Connecting cord, l = 100 mm, red
07359.01
Connecting cord, l = 100 mm, blue
07359.04
Connecting cord, l = 500 mm, red
07361.01
Connecting cord, l = 500 mm, blue
07361.04
Connecting cord, l = 500 mm, black
07361.05
Cobra3 Basic Unit
12150.00
Power supply, 12 V
12151.99
Tesla measuring module
12109.00
Cobra3 Software Hall
14521.61
RS 232 data cable
14602.00
PC, Windows 95 or higher
Quantity
Order No.
Please specify this

Order No. if you would
like to order the complete
experiment.
Complete Equipment Set, Manual on CD-ROM included

Hall effect in p-germanium with Cobra3
P2530111
Comprehensive experiments
cover the entire range of classical
and modern physics
Complete equipment offering

modular experimental set-up
multiple use of individual devices,
cost effective and flexible
Excellent measurement accuracy

results agree with theory
Developed and proven by

practicians unproblematical and
reliable performance
Computer-assisted experiments
simple, rapid assessement of the
results
Summary
Mechanics
1.4.04-00
Viscosity measurements with the falling ball viscometer
1.4.05-00
Surface tension by the ring method (Du Nouy method)
1.4-06-11
Surface tension by the pull-out method with Cobra3
1.4.07-00
Barometric height formula
1.4.08-00
Lift and drag (resistance to flow)
1.1
Measurement Techniques
1.1.01-00
Measurement of basic constants: length, weight and time
1.5
Mechanical Vibration Acoustics
1.2
Statics
1.5.01-00
Vibration of strings
1.2.01-00
Moments
1.5.03-11
Velocity of sound in air with Cobra3
1.2.02-00
Modulus of elasticity
1.5.04-01/11 Acoustic Doppler effect
1.2.03-00
Mechanical hysteresis
1.5.05-15
1.3
Dynamics
1.5.06-01/15 Velocity of sound using Kundts tube
1.3.01-01
Hookes law
1.3.01-11
Hookes law with Cobra3
1.3.03-01/05 Newtons second law / Air track or Demonstration track

1.3.03-11/15 Newtons second law with Cobra3 /
Air track or Demonstration track
1.3.05-01/05 Laws of collision / Air track or Demonstration track
1.3.05-11/15 Laws of collision with Cobra3 /
1.3.07-01
Free fall
1.3.07-11
Free fall with Cobra3
1.3.09-01
Determination of the gravitational constant

with a Cavendish balance
1.3.11-00
Projectile motion
1.3.12-00
Ballistic Pendulum
Chladni figures with FG-Module
1.5.07-01/15 Wavelengths and frequencies with a Quincke tube

1.5.08-11
Resonance frequencies of Helmholtz resonators

with Cobra3
1.5.09-11
Interference of acoustic waves, stationary waves

and diffraction at a slot with Cobra3
1.5.10-00
Optical determination of velocity of sound in liquids
1.5.11-00
Phase and group velocity of ultrasonics in liquids
1.5.12-00
Temperature dependence of the Velocity of sound in liquids
1.5.13-00
Stationary ultrasonic waves, determination of wavelength
1.5.14-00
Absorption of ultrasonic in air
1.5.15-15
Ultrasonic diffraction at different single

and double slit systems
1.5.16-15
Ultrasonic diffraction at different multiple slit systems
1.5.17-15
Diffraction of ultrasonic waves at a pin hole

and a circular obstacle
1.3.13-01
Moment of inertia and angular acceleration
1.5.18-00
1.3.13-11

with Cobra3
Diffraction of ultrasound at a Fresnel zone plate /

Fresnels zone construction
1.5.19-15
Interference of two identical ultrasonic transmitters
1.3.15-00
Moment and angular momentum
1.5.20-00
Interference of ultrasonic waves by a Lloyd mirror
1.3.16-01
Centrifugal force
1.5.21-11
Determination of the velocity of sound (sonar principle)
1.3.16-11
Centrifugal force with Cobra3
1.5.22-00
Ultrasonic Michelson-Interferometer
1.3.18-00
Mechanical conservation of energy / Maxwells wheel
1.5.23-00
Ultrasonic diffraction by a straight edge
1.3.19-00
Laws of gyroscopes / 3-axis gyroscope
1.5.24-15
Ultrasonic Doppler effect
1.3.20-00
Laws of gyroscopes / cardanic gyroscope
1.3.21-00
Mathematical pendulum
1.6
Handbooks
1.3.22-00
Reversible pendulum
Physics Experiments Linear Motion
1.3.23-01
Pendulum oscillations / variable g pendulum
Physics Demonstration Experiments

Magnet Board Mechanics 1
1.3.23-11
Pendulum oscillations with Cobra3
1.3.25-01
Coupled Pendula
1.3.25-11
Coupled Pendula with Cobra3
1.3.26-11
Harmonic oscillations of spiral springs

Springs linked in parallel and series
1.3.27-01
Forced Oscillations Pohls pendulum
1.3.27-11
Forced Oscillations Pohls pendulum;

Determination of resonance frequencies by Fourier analysis
1.3.28-01
Optics
2.1
Geometrical Optics
Moments of inertia of different bodies / Steiners theorem
2.1.01-00
Measuring the velocity of light
1.3.28-11
Moments of inertia of different bodies /

Steiners theorem with Cobra3
2.1.02-00
Laws of lenses and optical instruments
2.1.03-00
1.3.30-00
Torsional vibrations and torsion modulus
Dispersion and resolving power of the prism

and grating spectroscope
1.3.31-00
Moment of inertia and torsional vibrations
2.2
Interference
1.3.32-00
The propagation of a periodically excited continuous

transverse wave
2.2.01-00
Interference of light
Phase velocity of rope waves
2.2.02-00
Newtons rings
2.2.03-00
Interference at a mica plate according to Pohl
1.3.33-00
1.4
Mechanics of Liquids and Gaseous Bodies
2.2.04-00
Fresnels zone construction / zone plate
1.4.01-00
Density of liquids
2.2.05-00
Michelson interferometer
1.4.02-00
Surface of rotating liquids
2.2.06-00
1.4.03-00
Viscosity of Newtonian and non-Newtonian liquids

(rotary viscometer)
Coherence and width of spectral lines with Michelson

interferometer
2.2.07-00
Refraction index of air and CO2 with Michelson interferometer
8 Laboratory Experiments Physics
Summary
2.3
Diffraction
3.4
2.3.01-00
Diffraction at a slit and Heisenbergs uncertainty principle
3.4.01-00
Vapour pressure of water at high temperature
2.3.02-00
Diffraction of light at a slit and an edge
3.4.02-00
2.3.03-00
Intensity of diffractions due to pin hole diaphragms

and circular obstacles
Vapour pressure of water below 100C /

Molar heat of vaporization
3.4.03-00
Boiling point elevation
2.3.04-00
Diffraction intensity for multiple slits and grids
3.4.04-00
Freezing point depression
2.3.05-00
Determination of the diffraction intensity at slit

3.5
Transport and Diffusion
2.3.06-00
Diffraction intensity through a slit and a wire

Babinets theorem
2.4
Photometry
2.4.02-01
Photometric law of distance
2.4.02-11
Photometric law of distance with Cobra3
2.4.04-00
Lamberts law
Phase Transitions
3.5.01-01/15 Stefan-Boltzmanns law of radiation

3.5.02-00
Thermal and electrical conductivity of metals
3.6
Applied Thermodynamics
3.6.01-00
Solar ray Collector
3.6.02-00
Heat pump
3.6.03-00
Heat insulation / Heat conduction
3.6.04-01/15 Stirling engine
2.5
Polarisation
2.5.01-00
Polarisation by quarterwave plates
2.5.02-00
Polarimetry
2.5.03-00
Fresnels equations theory of reflection
2.5.04-00
Malus law
2.6
Applied Optics
2.6.01-00
Faraday effect
2.6.02-00
Kerr effect
2.6.03-00
Recording and reconstruction of holograms
2.6.04-00
CO2-laser
2.6.05-11
LDA Laser Doppler Anemometry with Cobra3
4.1.01-01
Measurement of small resistance
2.6.07-01
Helium Neon Laser
4.1.01-15
Ohms Law with FG-Module
2.6.08-00
Optical pumping
4.1.02-00
Wheatstone Bridge
2.6.09-00
Nd-YAG laser
4.1.03-00
Internal resistance and matching in voltage source
2.6.10-00
Fibre optics
4.1.04-01/15 Temperature dependence of different resistors

and diodes
3.7
Handbooks
Glas jacket system
Demonstration Experiments Physics Magnetic Board Heat
4
4.1
Electricity
Stationary Currents
2.6.11-00
Fourier optics 2f Arrangement
2.6.12-00
Fourier optics 4f Arrangement Filtering and reconstruction
4.1.06-01/15 Current balance/

Force acting on a current-carrying conductor
2.7
Handbooks
4.1.07-00
Semiconductor thermogenerator
Advanced Optics and Laser Physics Handbook 13
4.1.08-00
Peltier heat pump
Physics Demonstration Experiments Magnet Board Optics
4.1.09-01
Characteristic curves of a solar cell
4.1.09-15
Characteristic curves of semiconductors with FG-Module
4.1.11-00
Characteristic and efficiency of PEM fuel cell

and PEM electrolyser
4.1.12-00
Faradays law
4.1.13-15
Second order conductors. Electrolysis with FG-Module
Thermodynamics
3.1
Thermal Expansion
3.1.01-00
Thermal expansion in solids and liquids
3.2
4.2
Electric Field
4.2.01-00
Electrical fields and potentials in the plate capacitor
Ideal and Real Gases
4.2.02-00
Charging curve of a capacitor
3.2.01-01
Equation of state of ideal gases
4.2.02-15
3.2.01-15
Equation of state of ideal gases with Cobra3
Switch-on behaviour of a capacitor and an inductivity

with FG-Module
3.2.02-01
Heat capacity of gases
4.2.03-00
Capacitance of metal spheres and of a spherical capacitor
4.2.04-01
Coulombs law / Image charge
4.2.04-15
Coulombs law with Cobra3
4.2.05-00
Coulomb potential and Coulomb field of metal spheres

Dielectric constant of different materials
3.2.02-11
Heat capacity of gases with Cobra3
3.2.03-00
Maxwellian velocity distribution
3.2.04-00
Thermal equation of state and critical point
3.2.05-00
Adiabatic coefficient of gases Flammersfeld oscillator
4.2.06-00
3.2.06-00
Joule-Thomson effect
4.3
Magnetic Field
3.3
Calorimetry, Friction Heat
4.3.01-00
Earths magnetic field
3.3.01-01
Heat capacity of metals
4.3.02-01/15 Magnetic field of single coils / Biot-Savarts law
3.3.01-11
Heat capacity of metals with Cobra3
4.3.03-01/15 Magnetic field of paired coils in Helmholtz arrangement
3.3.02-00
Mechanical equivalent of heat
4.3.04-00
Magnetic moment in the magnetic field
Summary
4.3.05-00
Magnetic field outside a straight conductor
5.2.21-01/11/15 Rutherford experiment
4.3.06-00
Magnetic field inside a conductor
5.2.22-01/11/15 Fine structure of the -spectrum of 241Am
4.3.07-11
Ferromagnetic hysteresis
5.2.23-01/11/15 Study of the -energies of 226Ra
4.3.08-00
Magnetostriction with the Michelson interferometer
5.2.24-01/11/15 Energy loss of -particles in gases
4.4
Electrodynamics
5.2.31-00
Electron absorption
5.2.32-00
-spectroscopy
5.2.41-01/11
Law of distance and absorption of gamma

or beta rays
4.4.01-00
Transformer
4.4.02-01/15 Magnetic induction

4.4.03-01/11 Inductance of solenoids
4.4.04-01/11 Coil in the AC circuit with Cobra3
4.4.05-01/15 Capacitor in the AC circuit
4.4.06-01/11 RLC Circuit with Cobra3
5.2.42-01/11/15 Energy dependence of the -absorption coefficient

5.2.44-01/11/15 Compton effect
5.4.45-01/11/15 Internal conversion in 137mBa
4.4.07-00
Rectifier circuits
5.2.46-01/11/15 Photonuclear cross-section /

Compton scattering cross-section
4.4.08-00
RC Filters
5.2.47-01/11/15 X-ray fluorescence and Moseleys law
4.4.09-01/15 High-pass and low-pass filters

4.4.10-00
RLC measuring bridge
5.3
Solid-state Physics
4.4.11-00
Resistance, phase shift and power in AC circuits
5.3.01-01
Hall effect in p-germanium
4.4.12-11
Induction impulse
5.3.01-11
4.5
Electromagnetic Oscillations and Waves
4.5.02-00
Coupled oscillating circuits
4.5.04-00
Interference of microwaves
4.5.05-00
Diffraction of microwaves
4.5.06-00
4.5.08-00
4.5.09-00
Frustrated total reflection / Microwaves
4.6
Handbooks
5.3.02-01/11
Hall effect in n-germanium
5.3.03-00
Hall effect in metals
5.3.04-01
Band gap of germanium
5.3.04-11
Band gap of germanium with Cobra3
Diffraction and polarization of microwaves
5.4
X-ray Physics
Radiation field of a horn antenna / Microwaves
5.4.01-00
5.4.02-00
5.4.03-00
5.4.04-00
Characteristic X-rays of copper

Characteristic X-rays of molybdenum
Characteristic X-rays of iron
The intensity of characteristic X-rays as a function of anode
current and anode voltage
Monochromatization of molybdenum X-rays
Monochromatization of copper X-rays
K doublet splitting of molybdenum X-rays / fine structure
K doublet splitting of iron X-rays / fine structure
Duane-Hunt displacement law and Planck's quantum of action
Characteristic X-ray lines of different anode materials /
Moseley's Law; Rydberg frequency and screening constant
Absorption of X-rays
K- and L-absorption edges of X-rays /
Moseley's Law and the Rydberg constant
Examination of the structure of NaCl monocrystals with
different orientations
X-ray investigation of different crystal structures /
Debye-Scherrer powder method
X-ray investigation of crystal structures / Laue method
Compton scattering of X-rays
X-ray dosimetry
Contrast medium experiment with a blood vessel model
Determination of the length and position of an object
which cannot be seen
Diffractometric Debye-Scherrer patterns of powder samples
with the three cubic Bravais lattices
with diamond structure (germanium and silicon)
with a hexagonal lattice structure
with a tetragonal lattice structure
with a cubic powder sample
Diffractometric measurements to determine the intensity of
Debye-Scherrer reflexes using a cubic lattice powder sample
Diffractometric Debye-Scherrer measurements
for the examination of the texture of rolled sheets
Demonstration Experiments Physics

Electricity/Electronics on the Magnetic Board 1 + 2
Physical Structure of Matter
5.4.05-00
5.4.06-00
5.4.07-00
5.4.08-00
5.4.09-00
5.4.10-00
5.4.11-00
5.4.12-00
5.1
Physics of the Electron
5.1.01-00
Elementary charge and Millikan experiment
5.1.02-00
Specific charge of the electron e/m
5.4.13-00
5.1.03-11
Franck-Hertz experiment with Hg-tube
5.4.14/15-00
5.1.03-15
Franck-Hertz experiment with Ne-tube
5.1.04-01/05 Plancks quantum of action from photoelectric effect

(line separation by interference filters)
5.1.05-01/05 Plancks quantum of action from the photoelectric effect
(line separation by defraction grating)
5.1.06-00
Fine structure, one-electron and two-electron spectra
5.1.07-00
Balmer series / Determination of Rydbergs constant
5.1.08-00
Atomic spectra of two-electron systems: He, Hg
5.1.10-05
Zeeman effect
5.1.11-01/11 Stern-Gerlach experiment

5.1.12-00
Electron spin resonance
5.1.13-00
Electron diffraction
5.2
Radioactivity
5.2.01-01
Half-life and radioactive equilibrium
5.4.16-00
5.4.17-00
5.4.18-00
5.4.19-00
5.4.20-00
5.4.21-00
5.4.22-00
5.4.23-00
5.4.24-00
5.4.25-00
5.4.26-00
5.2.01-11
Half-life and radioactive equilibrium with Cobra3
5.4.27-00
5.2.03-11
Poissons distribution and Gaussian distribution

of radioactive decay with Cobra3
Influence of the dead time of the counter tube
5.4
Handbooks
5.2.04-00
Visualisation of radioactive particles / Diffusion cloud chamber
X-Ray Experiments
5.2.20-15
Alpha-Energies of different sources with MCA
Interface-System Cobra3 Physics and Chemistry/Biology
Mechanics
1
Mechanics
Contents
1.1
1.1.01-00
Measurement of basic constants: length, weight and time
1.2
1.2.01-00
1.2.02-00
1.2.03-00
Statics
Moments
1.3
1.3.01-01
1.3.01-11
1.3.03-01/05
1.3.03-11/15
Dynamics
Hookes law
Newtons second law / Air track or Demonstration track
Newtons second law with Cobra3 / Air track or
Demonstration track
Laws of collision / Air track or Demonstration track
Laws of collision with Cobra3 / Air track or Demonstration track
Free fall
Projectile motion
Ballistic Pendulum
Moment of inertia and angular acceleration with Cobra3
Centrifugal force
Mechanical conservation of energy / Maxwells wheel
Reversible pendulum
Pendulum oscillations / variable g pendulum
Coupled Pendula
Forced Oscillations Pohls pendulum;
Moments of inertia of different bodies / Steiners theorem
Moment of inertia and torsional vibrations
1.3.05-01/05
1.3.05-11/15
1.3.07-01
1.3.07-11
1.3.09-01
1.3.11-00
1.3.12-00
1.3.13-01
1.3.13-11
1.3.15-00
1.3.16-01
1.3.16-11
1.3.18-00
1.3.19-00
1.3.20-00
1.3.21-00
1.3.22-00
1.3.23-01
1.3.23-11
1.3.25-01
1.3.25-11
1.3.26-11
1.3.27-01
1.3.27-11
1.3.28-01
1.3.28-11
1.3.30-00
1.3.31-00
1.3.32-00
1.3.33-00
1.4
1.4.01-00
1.4.02-00
1.4.03-00
1.4.04-00
1.4.05-00
1.4-06-11
1.4.07-00
1.4.08-00
1.5
1.5.01-00
1.5.03-11
1.5.04-01/11
1.5.05-15
1.5.06-01/15
1.5.07-01/15
1.5.08-11
1.5.09-11
1.5.10-00
1.5.11-00
1.5.12-00
1.5.13-00
1.5.14-00
1.5.15-15
1.5.16-15
1.5.17-15
1.5.18-00
1.5.19-15
1.5.20-00
1.5.21-15
1.5.22-00
1.5.23-00
1.5.24-15
1.6
The propagation of a periodically excited continuous transverse

wave
Density of liquids
Viscosity of Newtonian and non-Newtonian liquids
(rotary viscometer)
Viscosity measurements with the falling ball viscometer
Surface tension by the ring method (Du Nouy method)
Surface tension by the pull-out method with Cobra3
Acoustic Doppler effect
Velocity of sound using Kundts tube
Wavelengths and frequencies with a Quincke tube
Resonance frequencies of Helmholtz resonators with Cobra3
Interference of acoustic waves, stationary waves and diffraction
at a slot with PC interface
Optical determination of velocity of sound in liquids
Phase and group velocity of ultrasonics in liquids
Temperature dependence of the Velocity of sound in liquids
Stationary ultrasonic waves, determination of wavelength
Ultrasonic diffraction at different single and double slit systems
Ultrasonic diffraction at different multiple slit systems
Diffraction of ultrasonic waves at a pin hole and a circular obstacle
Diffraction of ultrasound at a Fresnel zone plate /
Interference of two identical ultrasonic transmitters
Interference of ultrasonic waves by a Lloyd mirror
Determination of the velocity of sound (sonar principle)
Handbooks
Physics Demonstration Experiments Magnet Board Mechanics 1
Mechanics
Measurement of basic constants: length, weight and time 1.1.01-00

What you can learn about
Length
Diameter
Inside diameter thickness
Curvature
Vernier
Weight resolution
Time measurement
Principle:
Caliper gauges, micrometers and
spherometers are used for the accurate measurement of lengths, thicknesses, diameters and curvatures. A
mechanical balance is used for
weight determinations, a decade
counter is used for accurate time
measurements. Measuring procedures, accuracy of measurement and
reading accuracy are demonstrated.
What you need:

Vernier calipers, stainless steel
Micrometer
Spherometer
Light barrier, compact
Digital counter, 4 decades
Alternatively to 13600.93:
Timer 2-1
03010.00
03012.00
03017.00
11207.20
13600.93
1
1
1
1
1
13607.99
Knife-edge measuring faces

for inside measurement
Slide
Guide bar
Vernier
Depth measuring
Graduated scale
Movable jaw blade
Precision balance, double pan type, 500 g

Set of precision weights, 1 mg...200 g, in case
Iron column
Iron wire, d = 1.0 mm, l = 10 m
Aluminium foil, 4 sheets
Glass plate, 100 mm x 85 mm x 1 mm
Watch glass, d = 80 mm
Glass tube, AR-glass, straight,
d = 8 mm, l = 80 mm, 10 pcs.
Glass tubes, AR-glass, d = 24 mm, l = 120 mm
Cubes, set of 8
Fishing line on spool, d = 0,5 mm, l = 100 mm
Steel balls with eyelet, d = 32 mm
Rod with hook
Tripod base -PASSRight angle clamp -PASSMeasuring tape, l = 2 m
Connecting cable, 4 mm plug, 32 A, red, l = 50 cm
Connecting cable, 4 mm plug, 32 A, blue, l = 50 cm
Connecting cable, 4 mm plug, 32 A, yellow, l = 50 cm
44011.50
44070.20
03913.00
06104.01
06270.00
08203.00
34572.00
34574.00
34575.00
1
1
1
1
1
1
1
1
1
36701.65
45158.00
02214.00
02090.00
02466.01
02051.00
02027.55
02002.55
02040.55
09936.00
07361.01
07361.04
07361.02
1
1
1
1
1
1
1
1
2
1
1
1
1
Fixed
jaw
blade
Measuring faces
for depth
measurement
Measuring faces
for outside
measurement
Vernier caliper
Tasks:
1. Determination of the volume of
tubes with the caliper gauge.
2. Determination of the thickness of
wires, cubes and plates with the
micrometer.
3. Determination of the thickness of
plates and the radius of curvature
of watch glasses with the spherometer.

Measurement of basic constants:
length, weight and time
P2110100
Mechanics
Statics
1.2.01-00 Moments
Moments
Couple
Equilibrium
Statics
Lever
Coplanar forces
Principle:
Coplanar forces (weight, spring balance) act on the moments disc on
either side of the pivot. In equilibrium, the moments are determined as
a function of the magnitude and
direction of the forces and of the
reference point.
What you need:

m = 0.1 kg
Moments disk
02270.00
Precision spring balance 1 N
03060.01
r2 = 0.12 m
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
02026.55
02040.55
Swivel clamp -PASS-
02041.55
Bolt with pin
02052.00
Weight holder for slotted weights
02204.00
Slotted weights, 10 g, coated black
02205.01
Slotted weight, 50 g, coated black
02206.01
02090.00
Rule, plastic, 200 mm
09937.01
= /2.

Moments
P2120100
Moment as a function of the distance between the origin of the coordinates

and the point of action of the force.
Tasks:
1. Moment as a function of the distance between the origin of the
coordinates and the point of action of the force,
2. moment as a function of the angle
between the force and the position vector to the point of action
of the force,
3. moment as a function of the force.
Mechanics
Statics
Modulus of elasticity 1.2.02-00

Youngs modulus
Stress
Deformation
Poissons ratio
Hookes law
Principle:
A flat bar is supported at two points.
It is bent by the action of a force
acting at its centre. The modulus of
elasticity is determined from the
bending and the geometric data of
the bar.
What you need:

Material
Dimensions [mm]
E N m-2
Steel
10 1.5
2.059 1011
17570.00
Steel
10 2
2.063 1011
Knife-edge with stirrup
03015.00
Bolt with knife edge
02049.00
Steel
10 3
2.171 1011
02204.00
Steel
151.5
2.204 1011
03060.01
Steel
201.5
2.111 1011
Tripod base -PASS-
02002.55
02025.55
Aluminium
102
6.702 1010
02027.55
Brass
102
9.222 1010
02040.55
02205.01 10
02206.01
Measuring tape, l = 2 m
09936.00
Dial gauge, 10/0.01 mm
03013.00
Holder for dial gauge
03013.01
Flat rods, set

P2120200
Table 1: The modulus of elasticity for different materials.
Tasks:
1. Determination of the characteristic curve of the dial gauge
2. Determination the bending of flat
bars as a function
of the force
of the thickness, at constant
force
of the width, at constant force
of the distance between the
support points at constant force
3. Determination the modulus of
elasticity of steel, aluminium and
brass.
Mechanics
Statics
1.2.03-00 Mechanical hysteresis

Elasticity
Plasticity
Relaxation
Torsion molulus
Plastic flow
Torque
Hookes law
Principle:
The relationship between torque and
angle of rotation is determined when
metal bars are twisted. The hysteresis curve is recorded.
Tasks:
1. Record the hysteresis curve of
steel and copper rods.
2. Record the stress-relaxation curve
with various relaxation times of
different materials.
What you need:

Torsion apparatus
02421.00
Torsion rod, steel, d = 2 mm, l = 500 mm
02421.01
Torsion rod, Al, d = 2 mm, l = 500 mm
02421.02
02421.03
02421.04
02421.05
02421.06
Torsion rod, brass, d = 2 mm, l = 500 mm
02421.07
Torsion rod, copper, d = 2 mm, l = 500 mm
02421.08
03060.01
Precision spring balances, 2.5 N
03060.02
Stopwatch, digital, 1/100 s
03071.01
Support base -PASS-
02005.55
02025.55
02027.55
02040.55
Mechanical hysteresis curve for the torsion of a copper rod of 2 mm diameter

and 0.5 m long.

P2120300
Mechanics
Statics
Hookes law 1.3.01-01

Hooke's law
Spring constant
Limit of elasticity
Elastic hysteresis
Elastic after-effect
Principle:
The validity of Hooke's law is determined for two helical springs with
different spring constants. The elongation of the helical spring, which
depends on the deforming force, is
studied by means of the weights of
masses. For comparison, a rubber
band, for which no proportionality
exists between the exerted force and
the resulting elongation, is submitted to the same forces.
Tasks:
1. Determining the spring constants
of helical springs
2. Study of the elongation of a rubber band
What you need:
Theory (Hooks Law)
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
02028.55
02040.55
Cursor for scale, 2 pieces, plastic, red
02201.00
02204.00
02205.01
Slotted weights, 10 g, silver colour
02205.02
02206.01
Slotted weights, 50 g, silver bronzing
02206.02
Helical springs, 3 N/m
02220.00
02222.00
Silk thread on spool, l = 200 mm
02412.00
Meter Scale, l = 1000 x 27 mm
03001.00
Holding pin
03949.00
Square section rubber strip, l = 10 m
03989.00

Hookes law
P2130101
Fw
N
2,0
Experiment
X
X
X
X
1,5
X
X
X
X
1,0
X
10
12
14
16
18
X
X
X
X
0,5
X
X
X
X
X
0
0
l
cm
Acting weight Fw as a function of the extension l for a rubber band

(elastic hysteresis).
Mechanics
Statics
1.3.01-11 Hookes law with Cobra3

Spring constant
Limit of elasticity
Extension and compression
Principle:
The validity of Hookes Law is proven
using various helical springs with
different spring constants. In comparison, the behaviour of a stretched
rubber band is examined, for which
there is no proportionality between
acting force and resulting extension.
Tasks:
1. Calibration of the system (movement sensor and force sensor).
2. Measurement of the tensile force
as a function of the path for three
different helical springs and a rubber band.
3. Determination of the spring constant and evaluation of a hysteresis curve.
4. Verification of Hookes law.
What you need:

Cobra3 BASIC-UNIT
Power supply 12V/2A
Data cable 2 x SUB-D, plug/socket, 9 pole
Software Cobra3 Force/Tesla
Newton measuring module
Newton Sensor
Movement sensor with cable
Adapter BNC socket/4 mm plug pair
Adapter, BNC socket - 4 mm plug
Right angle clamp -PASSSupport rod -PASS-, square, l = 1000 mm
Stand tube
Barrel base -PASSBench clamp -PASSPlate holder, opening width 0...10 mm
Nylon thread on spool, d = 0,4 mm, l = 50 mm
12150.00
12151.99
14602.00
14515.61
03989.00
12110.00
12110.01
12004.10
07542.27
07542.20
02220.00
02222.00
02224.00
02040.55
02028.55
02060.00
02006.55
02010.00
02062.00
03001.00
02095.00
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
Characteristic elongation curve for a helical spring with D = 20 N/m.

P2130111
Mechanics
Dynamics
Newtons second law / Air track or Demonstration track
1.3.03-01/05

Velocity
Acceleration
Force
Acceleration of gravity
Principle:
The distance-time law, the velocitytime law, and the relationship between mass, acceleration and force
are determined with the aid of the
air track rail for uniformly accelerated motion in a straight line.
Set-up of experiment P2130301 with air track
What you need:

Experiment P2130305 with demo track
Experiment P2130301 with air track
Timer 4-4
Precision pulley
Air track rail
Blower 230V/50Hz
Pressure tube, l = 1.5 m
Glider for air track
Diaphragm, l = 100 mm
Slotted weights, 1 g, polished
Stop, adjustable
Endholder for air track rail
Starter system, mechanical with release
Starter system for motion track
Magnet with plug for starter system
Fork with plug
Tube with plug
Plasticine, 10 sticks
Hook with plug
Weight holder, 1g, silver bronzing
Barrel base -PASSSupport rod -PASS-, square, l = 400 mm
Right angle clamp -PASSShutter plate for low friction cart, w = 100 mm
Needle with plug
Demonstration Track, Aluminium, l = 1.5 m
Cart, low friction sapphire bearings
Pulley for demonstration track
Holder for pulley
Weight for low friction cart, 400 g
End holder for demonstration track
Holder for light barrier
Portable Blance, OHAUS CS2000
13605.99
1 1
11207.20
4 4
11201.02
1
11202.17
1
13770.97
1
11205.01
1
11202.02
1
11202.03
1
03916.00 20 20
02205.01
8 8
02206.01
4 4
11202.19
1
11202.15
1
11202.13
1
11309.00
1
11202.14
1 1
11202.08
1 1
11202.05
1 1
03935.03
1 1
11202.07
1 1
02412.00
1 1
02407.00
1 1
02006.55
4
02026.55
4
02040.55
4
11308.00
1
11202.06
1 1
11305.00
1
11306.00
1
11305.10
1
11305.11
1
11306.10
1
11305.12
1
11307.00
4
48892.00
1 1
The distance travelled s plotted as a function of the time t ;

m1 = 10 g, m2 = 201 g.
You can find more
Tasks:
Determination of:
experiments in
experimental literature
1. Distance travelled as a function of

time
Linear Motion
3. Acceleration as a function of the

accelerated mass
Order No. 16001.02

(see page 82)
2. Velocity as a function of time
4. Acceleration as a function of
force.

Connecting cable, 4 mm plug, 32 A, black, l = 200 cm
07363.01
07363.02
07363.04
07365.02
07365.05
4
4
4
4
4
4
4
4
1
1

Newtons second law /
P21303 01/05
Mechanics
1.3.03-11/15
Dynamics
Newtons second law with Cobra3 / Air track or Demonstration track

Linear motion
Velocity
Acceleration
Conservation of energy
Principle:
According to Newtons 2nd law of
motion for a mass point, the relationship between mass, acceleration
and force are investigated.
Set-up of experiment P2130315 with demo track
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
Software Cobra3, Translation/ Rotation
14512.61
11207.20
Air track rail
11202.17
Blower 230V/50Hz
13770.97
11205.01
11202.02
03916.00
02205.01
Slotted weights, 50 g, silver bronzing
02206.02
Stop, adjustable
11202.19
Tasks:
11202.13
The distance-time law, the velocitytime law and the relationship between mass, acceleration and force
are determined. The conservation of
energy can be investigated.
1
20
Path-time law.
11202.14
Tube with plug
11202.05
03935.03
Hook with plug
11202.07
02412.00
Weight holder, 1 g, silver bronzing
02407.00
Bench clamp -PASS-
02010.00
Bosshead
02043.00
Support rod, stainless steel 18/8,

l = 250 mm, d = 10 mm
02031.00
Support rod, stainless steel 18/8, l = 100 mm
02030.00
07363.01
09936.00
07363.04
Needle with plug
11202.06
Connecting cable, 4 mm plug, 32 A, yellow, l = 100 cm 07363.02
11305.00
Connecting plug, pack of 2
07278.05
11306.00
Crocodile clips, black, plastic insulation, pack of 10
07276.15
Holder for pulley
11305.11
11306.10
11305.12
48892.00

Newtons second law with Cobra3 /
P21303 11/15
Mechanics
Dynamics
Laws of collision / Air track or Demonstration track
1.3.05-01/05

Conservation of momentum
Linear motion
Velocity
Elastic loss
Elastic collision
Principle:
The volocities of two gliders, moving
without friction on an air-cushion
track, are measured before and after
collision, for both elastic and inelastic collision.
Set-up of experiment P2130505 with demo track
What you need:

Air track rail
11202.17
Blower 230V/50Hz
13770.97
11205.01
11202.02
11202.03
Tube with plug
11202.05
Needle with plug
11202.06
Fork with plug
11202.08
Rubber bands for fork with plug, 10 pcs.
11202.09
Plate with plug
11202.10
11202.13
11202.14
11202.15
02205.01
02206.01
11207.20
Timer 4-4
13605.99
48892.00
Barrel base -PASS02006.55
02026.55
Right angle clamp -PASS02040.55
11305.00
11306.00
11309.00
11306.10
Shutter plate for low friction cart, w = 100 mm
11308.00
11307.00
11305.12
07363.01
Connecting cable, 4 mm plug, 32 A, blue, l = 100 cm 07363.04
1
1
1
2
2
2 2
1 2
1 1
1 1
1 1
1
1 1
1
10 10
6 6
2 2
1 1
1 1
2
1
2
1
2
1
2
2
2
1
2 2
2 2
2 2

Laws of collision /
P21305 01/05
Elastic collision: calculated energies after the collision as functions of the

mass ratio of the gliders.
Tasks:
1. Elastic collision
1.1 The impulses of the two gliders
as well as their sum after the
collision. For comparison the
mean value of the impulses of
the first glider is entered as a
horizontal line in the graph.
1.2 Their energies, in a manner analogous to Task 1.1
1.3 In accordance with the mean
value of the measured impulse of
the first glider before the collision, the theoretical values of the
impulses for the two gliders are
entered for a range of mass
ratios from 0 to 3. For purposes
of comparison the measuring
points (see 1.1) are plotted in the
graph.
1.4 In accordance with the mean
value of the measured energy of
the first glider before the colli-
sion, the theoretical values of the

energy after the collision are
plotted analogously to Task 1.3.
In the process, the measured values are compared with the theoretical curves.
2. Inelastic collision
2.1 The impulse values are plotted as
in Task 1.1.
2.2 The energy values are plotted as
in Task 1.2.
2.3 The theoretical and measured
impulse values are compared as
in Task 1.3.
2.4 As in Task 1.4, the theoretical an
measured energy values are
compared. In order to clearly
illustrate the energy loss and its
dependence on the mass ratios,
the theoretical functions of the
total energy of both gliders and
the energy loss after the collision
are plotted.
Mechanics
1.3.05-11/15
Dynamics
Laws of collision with Cobra3 / Air track or Demonstration track

Linear motion
Velocity
Elastic loss
Principle:
The velocity of two gliders, moving
without friction on an air-cushion
track, are measured before and after
collision, for both elastic and inelastic collision.
Set-up of experiment P2130511 with air track
What you need:

Air track rail
Blower 230V/50Hz
Tube with plug
Needle with plug
Fork with plug
Rubber bands for fork with plug, 10 pcs.
Plate with plug
Shutter plate for low friction cart, w = 100 mm
Cobra3 BASIC-UNIT
Power supply 12V/2A
Software Cobra3, Timer/Counter
Barrel base -PASSBosshead
Stop, adjustable
11202.17
13770.97
11205.01
11202.02
11202.03
11202.05
11202.06
11202.08
11202.09
11202.10
11202.13
11202.14
11202.15
02205.01
02206.01
11207.20
48892.00
11305.00
11306.00
11309.00
11306.10
11308.00
11307.00
11305.12
07363.01
07363.02
07363.04
12150.00
12151.99
14602.00
14511.61
03935.03
02032.00
02006.55
02043.00
11202.19
07359.01
11202.04
1
1
1
1
2
2 2
2 2
1 1
1 1
1 1
1
1 1
2
4 10
4 6
2 2
1 1
1
2
1
2
2
2
1
2 2
2 2
2 2
1 1
1 1
1 1
1 1
1 1
2
2
2
1
2 2
2
Measuring parameters for velocity measurement
Tasks:
1. Elastic collision
A glider whose mass always remains unchanged collides with a
second resting glider at a constant
velocity. A measurement series, in
which the velocities of the first
glider before the collision and the
velocities of both gliders after it
are to be measured, is conducted
by varying mass of the resting
glider.
2. Inelastic collision
A glider, whose mass always remains unchanged, collides with a
constant velocitiy with a second
resting glider. A measurement series with different masses of the
resting glider is performed: the
velocities of the first glider before
the collision and those of both
gliders, which have equal velocities, after it are to be measured.

Laws of collision with Cobra3 /
P21305 11/15
Mechanics
Dynamics
Free fall 1.3.07-01

Linear motion due to constant
acceleration
Laws of falling bodies
Gravitational acceleration
Principle:
A sphere falling freely covers certain
distances. The falling time is measured and evaluated from diagrams.
The acceleration due to gravity can
be determined.
Tasks:
1. To determine the functional relationship between height of fall
and falling time (h = h(t)=1/2 gt2).
2. To determine the acceleration due
to gravity.
What you need:

Falling sphere apparatus
02502.88
13600.93
Timer 2-1
13607.99
Support base -PASS-
02005.55
02040.55
Plate holder, opening width 0...10 mm
02062.00
02201.00
03001.00
02028.55
07363.01
07363.04

Free fall
P2130701
Height of fall as a function of falling time.
Mechanics
Dynamics
1.3.07-11 Free fall with Cobra3

Linear motion due to constant
acceleration
Laws governing falling bodies
Acceleration due to gravity
Principle:
The fall times t are measured for different heights of fall h. h is represented as the function of t or t2, so
the distance-time law of the free fall
results as
1
h =
g t2
2
Then the measured values are taken
to determine the acceleration due to
gravity g.
Tasks:
Determination of:
Distance time law for the free fall.
Velocity-time law for the free fall.
Precise measurement of the acceleration due to gravity for the free
fall.
What you need:

Falling sphere apparatus
Cobra3 BASIC-UNIT
Power supply 12V/2A
Tripod base -PASSSupport rod -PASS-, square, l = 1000 mm
Right angle clamp -PASSMeasuring tape, l = 2 m
02502.88
12150.00
12151.99
14602.00
14511.61
02002.55
02028.55
02040.55
09936.00
07362.02
07362.04
07364.02
07364.04
1
1
1
1
1
1
1
2
1
1
1
1
1
Height of fall as a function of falling time.

P2130711
Mechanics
Dynamics
Determination of the gravitational constant with a Cavendish balance 1.3.09-01

Law of gravitation
Torsional vibrations
Free and damped oscillations
Forced oscillations
Angular restoring moment
Moment of inertia of spheres
and rods
Steiner`s theorem
Shear modulus
Principle:
Two small lead balls of equal mass
are positioned one at each end of a
beam which is held suspended by a
thin tungsten thread, so that it can
swing freely across its equilibrium
position. When two further, but larger, lead balls held on a swivel arm are
now brought near to the small lead
balls, forces of attraction resulting
from gravitation effect acceleration
of the small balls in the direction of
the larger balls. At the same time,
the twisted metal thread generates a
restoring moment of rotation, so
What you need:

Cavendish-balance, computerized
02540.00
14602.00
Circular level with mounting, d = 35 mm
02122.00

P2130901
Output voltage of the free and damped oscillating Cavendish balance.
that the beam is subjected to

damped oscillation across a new
equilibrium position. The gravitational constant can be determined
both from the difference in the angle
of rotation of the different equilibrium positions and from the dynamic
behaviour of the swinging system
during attraction.
An integrated capacitive sensor produces a direct voltage that is proportional to the angle of deflection. This
can be recorded over time by an interface system, and the value of the
angle of rotation that is required be
so determined.
Tasks:
1. Calibrate the voltage of the capacitive angle sensor.
2. Determine the time of oscillation
and the damping of the freely
swinging torsion pendulum.
3. Determine the gravitational constant, using either the acceleration method, the final deflection
method or the resonance method.
Mechanics
Dynamics
1.3.11-00 Projectile motion

Trajectory parabola
Motion involving uniform
acceleration
Ballistics
Principle:
A steel ball is fired by a spring at different velocities and at different
angles to the horizontal. The relationships between the range, the
height of projection, the angle of inclination, and the firing velocity are
determined.
What you need:

Ballistic unit
11229.10
Recording paper, 1 roll, 25 m
11221.01
Steel ball, hardened and polished, d = 19 mm
02502.01
Two tier platform support
02076.03
03001.00
Barrel base -PASS-
02006.55
Speed measuring attachment
11229.30
Power supply 5 VDC/2.4 A with DC-socket 2.1 mm
13900.99

Projectile motion
P2131100
Maximum range as a function of the angle of inclination for different initial

velocity v0: Curve 1 v0 = 5.3 m/s
Curve 2 v0 = 4.1 m/s
Curve 3 v0 = 3.1 m/s
Tasks:
1. To determine the range as a function of the angle of inclination.
2. To determine the maximum height
of projection as a function of the
angle of inclination.
3. To determine the (maximum)
range as a function of the initial
velocity.
Mechanics
Dynamics
Ballistic Pendulum 1.3.12-00

Potential and kinetic energy
Rotational energy
Moment of inertia
Inelastic collision
Principle of conservation of
momentum
Angular momentum
Measurement of projectile
velocities
Principle:
Tasks:
What you need:

Ballistic unit
11229.10
Ballistic pendulum f. ballistic unit
11229.20
Speed measuring attachment
11229.30
Steel ball, hardened and polished, d = 19 mm
02502.01
13900.99

Ballistic Pendulum
P2131200
1. Measurement of the oscillation

amplitudes of the ballistic pendulum after capturing the steel ball
for the three possible tension
energies of the throwing device.
2. Calculation of the initial velocities
of the ball from the measured
oscillation amplitudes and the
mechanical data of the pendulum
is performed using the approximation formula (3).
3. Plotting of the velocity v of the
steel ball as a function of the
maximum deflection (090 ) of
the pendulum according to formula (3), taking into consideration
the special mechanical data of the
experiment.
4. Determination of the correction
factor fcor for the utilised pendulum for the conversion of the
velocities determined by using the
approximation formula into the
values obtained from the exact
theory. Correction of the velocity
values from Tasks 2.
Experimental set-up with supplement for direct measurement of the initial

velocity of the ball.
A classic method of determining the

velocity of a projectile is to shoot the
projectile into a resting mass which
is large compared to the projectiles
mass and hung as a pendulum. In the
process, the projectile remains in the
pendulum mass and oscillates with
it. This is an inelastic collision in
which the momentum remains
unchanged. If the pendulums
mechanical data are known, one can
infer the velocity of the pendulums
mass (including the projectiles mass)
at the lowest point of the
pendulums oscillation from the
amplitude of the pendulums oscillation. The momentum of the two
masses in this phase of the oscillation must thus be equal to the
impulse of the projectile before it
struck the pendulum. If one knows
the masses of the pendulum and the
projectile, one can calculate the
projectiles velocity.
In order to be able to use this measuring principle without danger, the
following set-up is used here: A steel
ball is shot at the mass of a pendulum with the aid of a spring catapult.
The pendulum mass has a hollow
space in which the steel ball is held.
If, additionally, two light barriers and
a time measuring device are available, an independent, direct measurement of the initial velocity of the
ball can be made.
5. If the supplementary devices for

the direct measurement of the
initial velocity are available,
measure the initial velocities corresponding to the three tension
steps of the throwing device by
performing 10 measurements
each with subsequent mean value
calculation. Plot the measured
points in the diagram from Task 3.
Give reasons for contingent
systematic deviations from the
theoretical curve.
Mechanics
Dynamics
1.3.13-01 Moment of inertia and angular acceleration

Angular velocity
Rotary motion
Moment
Moment of inertia of a disc
Moment of inertia of a bar
Moment of inertia of a mass
point
Principle:
A moment acts on a body which can
be rotated about a bearing without
friction. The moment of inertia is
determined from the angular acceleration.
Tasks:
From the angular acceleration, the
moment of inertia are determined as
a function of the mass and of the
distance from the axis of rotation.
1. of a disc,
2. of a bar,
3. of a mass point.
What you need:

Turntable with angular scale
02417.02
Aperture plate for turntable
02417.05
Air bearing
02417.01
Inertia rod
02417.03
Holding device with cable release
02417.04
Precision pulley
11201.02
Blower 230V/50Hz
13770.97
11205.01
Light barrier with counter
11207.30
Power supply 5 V DC/2.4 A with 4 mm plugs
11076.99
Supporting blocks, 10, 20, 30, 40 mm
02070.00
03916.00 20
02205.01 10
02206.01
02407.00
02412.00
Tripod base -PASS-
02002.55
02028.55
02026.55
02040.55
Bench clamp -PASS-
02010.00

Moment of inertia
and angular acceleration
P2131301
Moment of inertia of a mass point as a function of the square of its distance

from the axis of rotation.
Mechanics
Dynamics
Moment of inertia and angular acceleration with Cobra3 1.3.13-11

Angular velocity
Rotation
Moment
Torque
Moment of inertia
Rotational energy
Principle:
If a constant torque is applied to a
body that rotates without friction
around a fixed axis, the changing
angle of rotation increases proportionally to the square of the time and
the angular velocity proportional to
the time.
What you need:

Cobra3 BASIC-UNIT
Power supply 12V/2A
Blower 230V/50Hz
Air bearing
Bench clamp -PASSTripod base -PASSStand tube
Support rod, stainless steel 18/8, l = 250 mm, d = 10 mm
Bosshead
12150.00
12151.99
14602.00
14512.61
11207.20
13770.97
11205.01
02417.01
02417.02
02417.04
02417.05
03916.00
02205.01
02206.01
02412.00
02204.00
02010.00
02002.55
02060.00
02031.00
09936.00
02122.00
02043.00
07363.01
07363.04
07363.02
1
1
1
1
1
1
1
1
1
1
1
9
3
2
1
1
2
1
1
1
1
1
1
1
1
1
Potential energy and additionally the rotational energy.
Tasks:
1. Measurement of the laws of angle
and angular velocity according to
time for a uniform rotation movement.
2. Measurement of the laws of angle
and angular velocity according to
time for a uniformly accelerated
rotational movement.
3. Rotation angle is proportional to
the time t required for the rotation.

with Cobra3
P2131311
Mechanics
Dynamics
1.3.15-00 Moment and angular momentum

Circular motion
Angular velocity
Angular acceleration
Moment of inertia
Newtons laws
Rotation
Principle:
The angle of rotation and angular
velocity are measured as a function
of time on a body which is pivoted so
as to rotate without friction and
which is acted on by a moment. The
angular acceleration is determined
as a function of the moment.
What you need:

02417.02
02417.05
02417.04
Air bearing
02417.01
Precision pulley
11201.02
11205.01
Blower 230V/50Hz
13770.97
11207.30
11076.99
Capacitor 100 nF/250 V, G1
39105.18
Adapter, BNC plug/4 mm socket
07542.26
02407.00
03916.00 20
02412.00
07363.04
07363.01
02122.00
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
Bench clamp -PASS-
02010.00

P2131500
Angle of rotation as a function of time with uniformly accelerated rotary

motion for m = 0.01 kg, r = 0.015 m.
Tasks:
With uniformly accelerated rotary
motion, the following will be determined:
1. the angle of rotation as a function
of time,
3. the angular acceleration as a

function of time,
4. the angular acceleration as a
function of the lever arm.
2. the angular velocity as a function

of time.
Mechanics
Dynamics
Centrifugal force 1.3.16-01

Centripetal force
Rotary motion
Angular velocity
Apparent force
Principle:
A body with variable mass moves on
a circular path with adjustable radius
and variable angular velocity. The
centrifugal force of the body will be
measured as a function of these
parameters.
Tasks:
Determination of the centrifugal
force as a function
1. of the mass,
2. of the angular velocity,
3. of the distance from the axis of
rotation to the centre of gravity of
the car.
What you need:

Centrifugal force apparatus
11008.00
Car for measurements and experiments
11060.00
Holding pin
03949.00
Laboratory motor, 220 VAC
11030.93
Gearing 30:1
11029.00
Bearing unit
02845.00
Driving belt
03981.00
Support rod with hole, stainless steel, l = 10 cm
02036.01
Barrel base -PASS-
02006.55
11076.99
Spring balance holder
03065.20
02025.55
Bosshead
02043.00
Bench clamp -PASS-
02010.00
02090.00
Transparent spring balances, 2 N
03065.03
02205.01
02206.01
11207.30

Centrifugal force
P2131601
Centrifugal force as a function of the angular velocity v.
Mechanics
Dynamics
1.3.16-11 Centrifugal force with Cobra3

Centrifugal force
Centripetal force
Rotary motion
Angular velocity
Apparent force
Principle:
A body with variable mass moves on
a circular path with adjustable radius
and variable angular velocity. The
centrifugal force of the body will be
measured as a function of these parameters.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
12110.00
Newton Sensor
12110.01
14515.61
Centrifugal force apparatus
11008.00
Car for measurements and experiments
11060.00
Holding pin
03949.00
11030.93
Gearing 30:1
11029.00
Bearing unit
02845.00
Driving belt
03981.00
02036.01
02025.55
02040.55
Bench clamp -PASS-
02010.00
02090.00
02205.01
02206.01
Typical evaluation of central force as a function of the square of angular

velocity.
Tasks:
Determination of the centrifugal
force as a function
1. of the mass,
2. of the angular velocity,
rotation to the centre of gravity of
the car.

P2131611
Mechanics
Dynamics
Mechanical conservation of energy / Maxwells wheel 1.3.18-00

Maxwell disk
Energy of translation
Energy of rotation
Potential energy
Moment of inertia
Angular velocity
Instantaneous velocity
Gyroscope
Principle:
A disk, which can unroll with its axis
on two cords, moves in the gravitational field. Potential energy, energy
of translation and energy of rotation
are converted into one another and
are determined as a function of time.
Tasks:
What you need:

Support base -PASS-
02005.55
The moment of inertia of the

Maxwell disk is determined.
02028.55
02040.55
Using the Maxwell disk,
03001.00
1. the potential energy,
02201.00
2. the energy of translation,
Maxwell wheel
02425.00
3. the energy of rotation,
07363.01
are determined as a function of time.
07363.04
11207.30
02417.04
02062.00
07542.26
39105.18
11076.99

Mechanical conservation of energy /
Maxwells wheel
P2131800
Energy of the Maxwell disk as a

function of time.
1. Negative potential energy
2. Energy of translation
3. Energy of rotation
Mechanics
Dynamics
1.3.19-00 Laws of gyroscopes / 3-axis gyroscope

Momentum of inertia
Torque
Angular momentum
Precession
Nutation
Principle:
The momentum of inertia of the
gyroscope is investigated by measuring the angular acceleration caused
by torques of different known values.
In this experiment, two of the axes of
the gyroscope are fixed.
The relationship between the precession frequency and the gyro-frequency of the gyroscope with 3 free
axes is examined for torques of different values applied to the axis of
rotation.
If the axis of rotation of the forcefree gyroscope is slightly displaced, a
nutation is induced. The nutation
frequency will be investigated as a
function of gyro-frequency.
What you need:

Gyroscope with 3 axis
02555.00
11207.30
11076.99
Additional gyro disk with counter weight
02556.00
03071.01
Barrel base -PASS-
02006.55
02205.01

P2131900
Determination of the momentum of inertia from the slope of straight line

tR-1 = f(tP).
Tasks:
1. Determination of the momentum

of inertia of the gyroscope by
measurement of the angular
acceleration.
3. Investigation of the relationship

between precession and gyro-frequency and its dependence from
torque.
2. Determination of the momentum

of inertia by measurement of the
gyro-frequency and precession
frequency.
4. Investigation of the relationship

between nutation frequency and
gyro-frequency.
Mechanics
Dynamics
Laws of gyroscopes / cardanic gyroscope 1.3.20-00

Moment of inertia
Torque
Angular momentum
Nutation
Precession
Chaotic behaviour
Principle:
If the axis of rotation of the forcefree
gyroscope is displaced slightly, a nutation is produced. The relationship
between precession frequency or nutation frequency and gyro-frequency
is examined for different moments of
inertia.
Additional weights are applied to a
gyroscope mounted on gimbals, so
causing a precession.
What you need:

Gyroscope, Magnus type, incl. Handbook
02550.00
1. m2
= 0.163 kg
03071.01
2. m2 m1
= 0.112 kg
Digital stroboscopes
21809.93
3. m1
= 0.051 kg

P2132000
Tasks:
Note:
1. To determine the precession frequency as a function of the torque

and the angular velocity of the
gyroscope.
A detailed handbook (128 pages)

containing additional experiments is
included, free of charge, in the
equipment.
2. To determine the nutational frequency as a function of the angular velocity and the moment of
inertia.
Precession frequency as a function of the gyro frequency for different additional masses.
Mechanics
Dynamics
1.3.21-00 Mathematical pendulum

Duration of oscillation
Period
Amplitude
Harmonic oscillation
Principle:
A mass, considered as of point form,
suspended on a thread and subjected
to the force of gravity, is deflected
from its position of rest. The period
of the oscillation thus produced is
measured as a function of the thread
length and the angle of deflection.
What you need:

11207.30
11076.99
Steel balls with eyelet, d = 25.4 mm
02465.01
02466.01
03001.00
02201.00
02090.00
02040.55
Clamping pads on stem
02050.00
02029.55
Tripod base -PASS-
02002.55

P2132100
Period of the pendulum as a function of the angle of deflection.
Tasks:
1. For small deflections, the oscillation period is determined as a
function of the cord length.
2. The acceleration due to gravity is
determined.
3. The oscillation period is determined as a function of the deflection.
Mechanics
Dynamics
Reversible pendulum 1.3.22-00

Physical pendulum
Moment of inertia
Steiners law
Reduced length of pendulum
Reversible pendulum
Terrestrial gravitational
acceleration
Principle:
By means of a reversible pendulum,
terrestrial gravitational acceleration
g may be determined from the period of oscillation of a physical pendulum, knowing neither the mass nor
the moment of inertia of the latter.
Tasks:
1. Measurement of the period for
different axes of rotation.
2. Determination of terrestrial gravitational acceleration g.
What you need:

Bearing bosshead for reversing pendulum
02805.00
Support rod, stainless steel, l = 750 mm
02033.00
Bolt with knife edge
02049.00
11076.99
11207.30
02040.55
Bench clamp -PASS-
02010.00
Tripod base -PASS-
02002.55
02025.55
09936.00

Reversible pendulum
P2132200
T2
S
X
1.50
1.56
1.42
30
1.38
40
50
60
X
X
1.34
X
X
X
X
X
1.30
'a
'min
's
'
cm
Period T2 as a function of the position of the axis of rotation of the physical

pendulum.
Mechanics
Dynamics
1.3.23-01 Pendulum oscillations / variable g pendulum

Oscillation period
Physical pendulum
Decomposition of force
Moment of inertia
Principle:
Investigate the oscillation behaviour
of a pendulum (rod pendulum) by
varying the magnitude of the components of the acceleration of gravity which are decisive for the oscillation period. The pendulum that is to
be used is constructed in such a
manner that its oscillation plane can
be progressively rotated from a vertical orientation to a horizontal one.
The angle F, by which the oscillation
plane deviates from its normal vertical position, can be read from a
scale.
Tasks:
1. Measurement of the oscillation
period of the pendulum as a function of the angle of inclination
of the oscillation plane for two
different pendulum lengths.
2. Graphical analysis of the measured correlations and a comparison with the theoretical curves,
which have been standardised
with the measured value at = 0.
3. Calculation of the effective pendulum length l for the acceleration of gravity, which is assumed
to be known. Comparison of this
value with the distance between
the pivot point of the pendulum
and the centre of gravity of the
mobile pendulum weight.
What you need:

Variable g-pendulum
02817.00
02817.10
11207.20
Timer 4-4
13605.99
13607.99
Tripod base -PASS-
02002.55
07361.01
07361.02
07361.04
Timer 2-1

Pendulum oscillations /
variable g pendulum
P2132301
Oscillation period of the pendulum

as a function of the slope . of the
oscillation plane. The measured
points are plotted above the corresponding theoretical curve (solid
line). Upper curve: L = 270 mm;
lower curve: L = 141 mm.
4. On the moons surface the lunar

acceleration of gravity gm is only
16.6 % of the earths acceleration
of gravity g. Calculate the angle
and set it on the device such that
the pendulum in the laboratory
oscillates with the same oscillation period with which it would
oscillate on the moon in a perpendicular position. Compare the
measured oscillation period with
the calculated one.
Mechanics
Dynamics
Pendulum oscillations with Cobra3 1.3.23-11

Oscillation period
Physical pendulum
Variable g-pendulum
Gravitational force
Principle:
Earths gravitational acceleration g is
determined for different lengths of
the pendulum by means of the oscillating period. If the oscillating plane
of the pendulum is not parallel to the
gravitational field of the earth, only
one component of the gravitational
force acts on the pendulum movement.
Tasks:
1. Determination of the oscillation
period of a thread pendulum as a
function of the pendulum length.
2. Determination of g.
3. Determination of the gravitational acceleration as a function of
the inclination of the pendulum
force.
What you need:

Cobra3 BASIC-UNIT
Power supply 12V/2A
Stand tube
Right angle clamp -PASSBench clamp -PASSProtractor scale with pointer
Pendulum
12150.00
12151.99
14602.00
14512.61
12004.10
07542.27
07542.20
02412.00
02089.00
02407.00
02466.01
02002.55
02028.55
02060.00
02062.00
02040.55
02010.00
08218.00
02122.00
09936.00
12004.11
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
1
1
1
1
1
Typical measurement result

P2132311
Mechanics
Dynamics
1.3.25-01 Coupled Pendula

Spiral spring
Gravity pendulum
Spring constant
Torsional vibration
Torque
Beat
Angular velocity
Characteristic frequency
Principle:
Two equal gravity pendula with a
particular characteristic frequency
are coupled by a soft spiral spring.
The amplitudes of both pendula are
recorded as a function of time for
various vibrational modes and different coupling factors using a y/t
recorder. The coupling factors are
determined by different methods.
Tasks:
1. To determine the spring constant
of the coupling spring.
2. To determine and to adjust the
characteristic frequencies of the
uncoupled pendula.
3. To determine the coupling factors
for various coupling-lengths using
a) the apparatus constants
b) the angular frequencies for
inphase and in opposite
phase vibration
c) the angular frequencies of the
beat mode.
4. To check the linear relation
between the square of the
coupling-lengths and
What you need:

Pendulum with recorder connection
02816.00
02220.00
Rod with hook
02051.00
02204.00
02205.01
Yt recorder, 2 channels
11415.95
Power supply 0-12 V DC/ 6 V, 12 V AC
13505.93
Bench clamp -PASS-
02010.00
02027.55
02040.55
09936.00
07363.02
07363.01
07363.04

Coupled Pendula
P2132501
a) the particular frequencies of

the beat mode
l = 30 cm
b) the square of the frequency for

in opposite phase vibration.
5. To determine the pendulums
characteristic frequency from the
vibrational modes with coupling
and to compare this with the
characteristic frequency of the
uncoupled pendula.
l = 60 cm
l = 90 cm
Amplitude curves of the vibrations of

coupled pendula in the beat case for
three different coupling lengths l as
a function of time.
Speed of recorder: t = 10 s/Div.
Mechanics
Dynamics
Coupled Pendula with Cobra3 1.3.25-11

Spiral spring
Gravity pendulum
Spring constant
Torsional vibration
Torque
Beat
Angular velocity
Principle:
Two equal gravity pendula with a
particular characteristic frequency
are coupled by a soft spiral spring.
The amplitudes of both pendula are
recorded as a function of time for
various vibrational modes and different coupling factors using a y/t
recorder. The coupling factors are
determined by different methods.
Tasks:
1. To determine the spring constant
of the coupling spring.
2. To determine and to adjust the
characteristic frequencies of the
uncoupled pendula.
3. To determine the coupling factors
for various coupling-lengths using
a) the apparatus constants
b) the angular frequencies for
inphase and in opposite
phase vibration
c) the angular frequencies of the
beat mode.
What you need:

Pendulum with recorder connection
Rod with hook
Electrolyte capacitors G1, 10 F
Cobra3 BASIC-UNIT
Power supply 12V/2A
Software Cobra3 Universal recorder
Bench clamp -PASSSupport rod -PASS-, square, l = 630 mm
Right angle clamp -PASSMeasuring tape, l = 2 m
l = 30 cm
02816.00
02220.00
02051.00
02204.00
02205.01
39105.28
12150.00
12151.99
14504.61
14602.00
13505.93
02010.00
02027.55
02040.55
09936.00
07363.01
07363.04
2
1
1
1
5
2
1
1
1
1
1
2
2
2
1
4
4

P2132511
4. To check the linear relation between the square of the couplinglengths and
a) the particular frequencies of
the beat mode
b) the square of the frequency for
in opposite phase vibration.
l = 60 cm
5. To determine the pendulums

characteristic frequency from the
vibrational modes with coupling
and to compare this with the
characteristic frequency of the
uncoupled pendula.
l = 90 cm
Amplitude curves of the vibrations of

coupled pendula in the beat case for
three different coupling lengths
l (30 cm, 60 cm and 90 cm) as a
function of time.
Mechanics
Dynamics
1.3.26-11 Harmonic oscillations of spiral springs Springs linked in parallel and series
Spring constant
Hookes law oscillations
Limit of elasticity
Parallel springs
Serial springs
Use of an interface
Principle:
The spring constant D is determined
for different experimental set-ups
from the oscillation period and the
suspended mass.
Tasks:
1. Determination of the spring constant D for different springs.
2. Determination of the spring constant for springs linked in parallel.
3. Determination of the spring constant for springs linked in series.
What you need:

Cobra3 BASIC-UNIT
Power supply 12V/2A
Stand tube
Rod with hook
Right angle clamp -PASSHelical springs, 3 N/m
12150.00
12151.99
14602.00
14512.61
11207.20
02412.00
02204.00
02205.01
02206.01
02002.55
02028.55
02060.00
02051.00
02040.55
02220.00
02222.00
07363.01
07363.04
07363.02
1
1
1
1
1
1
1
4
7
1
1
1
1
2
2
1
1
1
1
Typical measurement result

P2132611
Mechanics
Dynamics
Forced Oscillations Pohls pendulum 1.3.27-01

Angular frequency
Resonance frequency
Torsion pendulum
Torsional vibration
Torque and Restoring torque
Damped/undamped free
oscillation
Forced oscillation
Ratio of attenuation/
decrement
Damping constant
Logarithmic decrement
Aperiodic case
Creeping
Principle:
If an oscillating system is allowed to
swing freely it is observed that the
decrease of successive maximum
amplitudes is highly dependent on
the damping. If the oscillating
system is stimulated to swing by an
What you need:

Torsion pendulum after Pohl
11214.00
Power supply, universal
13500.93
Bridge rectifier, 30 VAC/1 ADC
06031.10
03071.01
Digital multimeter 2010
07128.00
07360.02
07362.01
07362.04

P2132701
Resonance curves for different dampings.
Tasks:
B. Forced oscillation
A. Free oscillation
1. To determine the oscillating
period and the characteristic
frequency of the undamped
case.
1. The resonance curves are to be

determined and to be represented graphically using the
damping values of A.
2. To determine the oscillating

periods and the corresponding
characteristic frequencies for
different damping values. Successive, unidirectional maximum amplitudes are to be plotted as a function of time. The
corresponding ratios of attenuation, the damping constants
and the logarithmic decrements
are to be calculated.
2. The resonance frequencies are

to be determined and are to be
compared with the resonance
frequency values found beforehand.
3. To realize the aperiodic case

and the creeping.
3. The phase shifting between the

torsion pendulum and the stimulating external torque is to be
observed for a small damping
value assuming that in one case
the stimulating frequency is far
below the resonance frequency
and in the other case it is far
above it.
external periodic torque, we observe

that in the steady state the amplitude is a function of the frequency
and the amplitude of the external
periodic torque and of the damping.
The characteristic frequencies of the
free oscillation as well as the resonance curves of the forced oscillation for different damping values are
to be determined.
Mechanics
Dynamics
1.3.27-11 Forced Oscillations Pohls pendulum

Angular frequency
Resonance frequency
Torsion pendulum
Torsional vibration
Torque
Testoring torque
Damped /undamped free
oscillation
Forced oscillation
Ratio of attenuation /
decrement
Damping constant
Aperiodic case
Creeping
Chaotic behaviour
Principle:
What you need:

Torsion pendulum after Pohl
11214.00
13500.93
06031.10
03071.01
07128.00
07360.02
07362.01
07362.04
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14512.61
12004.10
07542.27
07542.20
02412.00
02407.00
Support base -PASS-
02005.55
02026.55
02025.55
02040.55
If an oscillating system is allowed to

swing freely it is observed that the
decrease of successive maximum
amplitudes is highly dependent on
the damping. If the oscillating
system is stimulated to swing by an
external periodic torque, we observe
that in the steady state the amplitude is a function of the frequency
and the amplitude of the external
periodic torque and of the damping.
The characteristic frequencies of the
free oscillation as well as the resonance curves of the forced oscillation for different damping values are
to be determined.
Therefore, the oscillations are
recorded with the Cobra3 systemin
connection with the movement sensor. The curves of the different oscillations are displayed and the necessary quantities for the determination
of the characteristic values can easily becalculated.

Determination of resonance frequencies by Fourier analysis P2132711
Tasks:
A. Free oscillation
1. To determine the oscillating period and the characteristic frequency of the undamped case.
2. To determine the oscillating periods and the corresponding characteristic frequencies for different
damping values. Successive, unidi44 Laboratory Experiments Physics
Recorded curve of the damped oscillation.
B. Forced oscillation
rectional maximum amplitudes are
to be plotted as a function of time.
The corresponding ratios of attenuation, the damping constants and the
logarithmic decrements are to be
calculated.
3. To realize the aperiodic case and
the creeping.
1. The resonance curves are to be

determined and to be represented
graphically using the damping
values of A.
2. The resonance frequencies are to
be determined and are to be compared with the resonance frequency values found beforehand.
3. The phase shifting between the

torsion pendulum and the stimulating external torque is to be
observed for a small damping
value assuming that in one case
the stimulating frequency is far
below the resonance frequency
and in the other case it is far
above it.
Mechanics
Dynamics
Moments of inertia of different bodies / Steiners theorem 1.3.28-01

Rigid body
Moment of inertia
Centre of gravity
Axis of rotation
Torsional vibration
Spring constant
Angular restoring force
Principle:
The period of vibration of a circular
disc which performs torsional vibrations about various parallel axes, is
measured. The moment of inertia of
the disc is determined as a function
of the perpendicular distance of the
axis of rotation from the centre of
gravity.
What you need:

Rotation axle
02415.01
Disk with diametrical holes
02415.07
Transparent spring balances, 2 N
03065.03
11207.30
11076.99
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
09937.01

Steiners theorem
P2132801
Tasks:
1. Determination of the angular
restoring constant of the spiral
spring.
2. Determination of the moment of
inertia of a circular disc as a function of the perpendicular distance
of the axis of rotation from the
centre of gravity.
Moment (torque) of a spiral spring as a function of the angle of rotation.
Mechanics
Dynamics
1.3.28-11 Moments of inertia of different bodies / Steiners theorem with Cobra3

Rigid body
Moment of inertia
Centre of gravity
Axis of rotation
Torsional vibration
Spring constant
Principle:
The moment of inertia of a solid body
depends on its mass distribution and
the axis of rotation. Steiners theorem elucidates this relationship.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14512.61
11207.20
Angular oscillation apparatus
02415.88
48892.00
Flat cell battery, 9 V
07496.10
02412.00
02407.00
03916.00
Bench clamp -PASS-
02010.00
Tripod base -PASS-
02002.55
Stand tube
02060.00
09936.00
07363.01
07363.04
07363.02
Typical measuring result
Tasks:
The moments of inertia of different
bodies are determined by oscillation
measurements. Steiners theorem is
verified.

P2132811
Mechanics
Dynamics
Torsional vibrations and torsion modulus 1.3.30-00

Shear modulus
Angular velocity
Torque
Moment of inertia
Angular restoring torque
G-modulus
Principle:
Bars of various materials will be exciting into torsional vibration. The
relationship between the vibration
period and the geometrical dimensions of the bars will be derived and
the specific shear modulus for the
material determined.
Tasks:
1. Static determination of the torsion modulus of a bar.
2. Determination of the moment of
inertia of the rod and weights
fixed to the bar, from the vibration
period.
3. Determination of the dependence
of the vibration period on the
length and thickness of the bars.
4. Determination of the shear modulus of steel, copper, aluminium
and brass.
What you need:

Torsion apparatus
Torsion rod, steel, d = 2 mm, l = 500 mm
Torsion rod, brass, d = 2 mm, l = 500 mm
Torsion rod, copper, d = 2 mm, l = 500 mm
Sliding weight
Support base -PASSSupport rod -PASS-, square, l = 250 mm
02421.00
02421.01
02421.02
02421.03
02421.04
02421.05
02421.06
02421.07
02421.08
03060.01
03060.02
03071.01
03929.00
02005.55
02025.55
02027.55
02040.55
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2

P2133000
Torque and deflection of a torsion bar.

Mechanics
Dynamics
1.3.31-00 Moment of inertia and torsional vibrations

Rigid body
Moment of inertia
Axis of rotation
Torsional vibration
Spring constant
Moment of inertia of a
sphere
Moment of inertia of a disc
cylinder
Moment of inertia of a long
bar
Moment of inertia of 2 point
masses
Principle:
Various bodies perform torsional
vibrations about axes through their
centres of gravity. The vibration
period is measured and the moment
of inertia determined from this.
What you need:

Rotation axle
02415.01
Sphere
02415.02
Disk
02415.03
Hollow cylinder
02415.04
Solid cylinder
02415.05
Rod with movable masses
02415.06
03060.02
11207.30
11076.99
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55

Moment of inertia and torsional vibrations P2133100
Tasks:
The following will be determined:
1. The angular restoring moment of
the spiral spring.
2. The moment of inertia
a) of a disc, two cylinder, a sphere
and a bar,
b) of two point masses, as a function of the perpendicular distance to the axis of rotation.
The centre of gravity lies in the
axis of rotation.
Moment of inertia of two equal masses, of 0.214 kg each, as a function of the

distance between them.
Mechanics
Dynamics
The propagation of a periodically excited continuous transverse wave 1.3.32-00

Periodic motion
Frequency
Wavelength
Phase velocity
Standing waves
Natural frequency
Free and fixed end
Damping of waves
Principle:
The periodicity of connected stationary oscillators is demonstrated on
the example of a continuous, harmonic transverse wave generated by
a wave machine. The number of
oscillations carried out by different
oscillators within a certain time is
determined and the velocity of propagation is measured. A relation between frequency, wavelength and
phase velocity is established. The
formation of standing waves is
demonstrated and studied.
What you need:
fk
Hz
fk
k
0.38
0.38
2L/1
0.74
0.37
2L/2
0.94
0.31
2L/3
1.43
0.36
2L/4
Wave machine
11211.00
Dual power supply 2 x 15 V-/ 2 A
13520.93
11207.30
11207.20
11030.93
Gearing 30:1
11029.00
Gearing 100:1
11027.00
Stopwatch, 15 minutes
03076.01
Screened cable, BNC, l = 1500 mm
07542.12
The resonance frequencies measured with increasing speed of rotation.
Bench clamp -PASS-
02010.00
03001.00
02040.55
02026.55
Tasks:
07365.01
07365.04
07364.04
07364.02
07542.26
1. The frequency of the oscillators 1,

10, 20, 30 and 40 is to be determined with the electronic counter
of the light barrier and the stopwatch for a particular frequency
of excitation.
07542.27

The propagation of a periodically excited
continuous transverse wave
P2133200
2. By means of a path-time measurement the phase velocity of a

transverse wave is to be determined.
3. For three different frequencies the

corresponding wavelengths are to
be measured and it is to be shown
that the product of frequency and
wavelength is a constant.
4. The four lowest natural frequencies with two ends of the oscillator system fixed are to be detected.
5. The four lowest natural frequencies with one end of the oscillator
system fixed and the other one
free are to be detected.
Mechanics
Dynamics
1.3.33-00 Phase velocity of rope waves

Wavelength
Phase velocity
Group velocity
Wave equation
Harmonic wave
Principle:
A quadrangular rubber rope is inserted through the demonstration motor
and a linear polarised fixed wave is
generated. With the help of a stroboscope, the frequency and the wave
length are determined. Then the
phase velocity of rope waves with a
fixed tensile stress is ascertained.
Subsequently, the mathematical
relationship between the phase
velocity of the rope and the tensile
on the rope is examined.
What you need:

Grooved wheel after Hoffmann
02860.00
03989.00
11030.93
Gearing 10:1
11028.00
Cotton cord, d = 2,5 mm, l = 10 mm
02091.00
Support base -PASS-
02005.55
02025.55
02028.55
02040.55
Rod with hook
02051.00
Pulleys, fixed, on rod, d = 10 mm
02260.00
03060.03
Bench clamp -PASS-
02010.00
02412.00
09936.00
21809.93

P2133300
The square of phase velocity depending upon the force F applied on the rope.
Tasks:
1. With constant tensile stress, the
frequency f, which depends on
the wavelength of the wave
that propagates itself along the
rope. The frequency is plotted as a
function of 1/. From this graph,
the phase velocity c is determined.
2. The phase velocity c of the rope
waves, which depends on the tensile stress on the rope is to be
measured. The quadrant of the
phase velocity is plotted as a
function of tensile stress.
Mechanics
Density of liquids 1.4.01-00

Hydrogen bond
H2O anomaly
Volume expansion
Melting
Evaporation
Mohr balance
Principle:
The density of water and glycerol is
determined as a function of temperature using the Mohr balance.
What you need:

Westphal/Mohr density balance
45016.00
Immersion thermostat TC10
08492.93
Accessory set for TC10
08492.01
Bath for thermostat, Makrolon
08487.02
Glycerol, 250 ml
30084.25
Water, distilled 5 l
31246.81
Sodium chloride, 500 g
30155.50

Density of liquids
P2140100
Density of water as a function of temperature.
Tasks:
The density of water and glycerol is
measured in 1 to 2 steps over a
temperature range from 0 to 20C,
then in larger steps up to 50C.
Mechanics
1.4.02-00 Surface of rotating liquids

Angular velocity
Centrifugal force
Rotary motion
Paraboloid of rotation
Equilibrium
Principle:
A vessel containing liquid is rotated
about an axis. The liquid surface
forms a paraboloid of rotation, the
parameters of which will be determined as a function of the angular
velocity.
What you need:

Rotating liquid cell
02536.01
Bearing unit
02845.00
Driving belt
03981.00
Motor with gearing, 12 VDC
11610.00
13505.93
11207.30
11076.99
Bench clamp -PASS-
02010.00
Barrel base -PASS-
02006.55
Methylene blue sol., alkal. 250 ml
31568.25

P2140200
Tasks:
On the rotating liquid surface, the
following are determined:
1. the shape,
2. the location of the lowest point as
a function of the angular velocity,
3. the curvature.
Location of the lowest point c of the liquid as a function of the angular

velocity.
Mechanics
Viscosity of Newtonian and non-Newtonian liquids (rotary viscometer) 1.4.03-00

Shear stress
Velocity gradient
Internal friction
Viscosity
Plasticity
Principle:
The viscosity of liquids can be determined with a rotation viscometer, in
which a motor with variable rotation
speed drives a cylinder immersed in
the liquid to be investigated with a
spiral spring. The viscosity of the liquid generates a moment of rotation
at the cylinder which can be measured with the aid of the torsion of
the spiral spring and read on a scale.
Tasks:
1. Determine the gradient of the rotational velocity as a function of
the torsional shearing stress for
two Newtonian liquids (glycerine,
liquid paraffin).
2. Investigate the temperature dependence of the viscosity of Castor oil and glycerine.
3. Determine the flow curve for a
non-Newtonian liquid (chocolate).
What you need:

Rotary viscosimeter
Support base -PASSSupport rod, stainless steel 18/8, l = 500 mm
Right angle clamp
Magnetic stirrer MR 3001 K
Magnetic stirring rod, cylindrical, l = 30 mm
Separator for magnetic bars, PTFE
Beaker, DURAN, short form, 600 ml
Beaker, DURAN, tall form, 250 ml
Stirring rods, BORO 3.3, l = 200 mm, d = 5 mm
Digital thermometer, NiCr-Ni
Immersion probe NiCr-Ni,-50/1000C
Glycerol, 250 ml
Liquid Paraffin, 250 ml
Castor oil, 250 ml
Acetone, chemical pure, 250 ml
18221.93
02005.55
02032.00
37697.00
35720.93
46299.02
35680.03
36015.00
36004.00
40485.03
07050.00
13615.03
30084.25
30180.25
31799.27
30004.25
1
1
1
1
1
1
1
3
2
1
1
1
2
1
2
3

Viscosity of Newtonian and non-Newtonian
liquids (rotary viscometer)
P2140300
Temperature dependence of the viscosity of castor oil.
Mechanics
1.4.04-00 Viscosity measurements with the falling ball viscometer

Liquid
Newtonian liquid
Stokes law
Fluidity
Dynamic and kinematic
viscosity
Viscosity measurements
Principle:
Due to internal friction among their
particles, liquids and gases have different viscosities. The viscosity, a
function of the substances structure
and its temperature, can be experimentally determined, for example, by
measuring the rate of fall of a ball in
a tube filled with the liquid to be investigated.
What you need:

Falling ball viscosimeter
18220.00
Immersion thermostat C10
08492.93
08492.01
08487.02
Retort stand, h = 750 mm
37694.00
Right angle clamp
37697.00
Universal clamp with joint
37716.00
Pyknometer, 25 ml, calibrated
03023.00
Volumetric flasks with standard joint and PP stopper,

BORO 3.3, 100 ml
36548.00
36003.00 11
36013.00
Pasteur pipettes, l = 145 ml
36590.00
Rubber caps, 10 pcs
39275.03
Hose clip, d = 8-12 mm
40996.01
Rubber tubing, di = 6 mm, l = 1 m
39282.00
03071.01
Laboratory balance, 120/240/620 g
48852.93
Wash bottle, plastic, 500 ml
33931.00
Methanol 500 ml
30142.50
31246.81

Viscosity measurements with the falling ball
viscometer
P2140400
Temperature dependence of the dynamic viscosity of water (o) and

methanol (+), respectively.
Tasks:
Measure the viscosity
1. of methanol-water mixtures of
various composition at a constant
temperature,
2. of water as a function of the temperature and
3. of methanol as a function of temperature.

From the temperature dependence of
the viscosity, calculate the energy
barriers for the displaceability of
water and methanol.
Mechanics
Surface tension by the ring method (Du Nouy method) 1.4.05-00

Surface energy
Interface
Surface tension
Adhesion
Critical point
Etvs equation
Principle:
The force is measured on a ring
shortly before a liquid film tears
using a torsion meter. The surface
tension is calculated from the diameter of the ring and the tear-off
force.
Tasks:
1. Determine the surface tension of
olive oil as a function of temperature.
2. Determine the surface tension of
water/methanol mixtures as functions of the mixture ratio.
What you need:

Torsion dynamometer, 0.01 N
Surface tension measuring ring
Retort stand, 210 mm x 130 mm, h = 500 mm
Magnetic stirrer MR 3001 K
Support rod with hole, stainless steel, l = 50 cm, M10 thread
Universal clamp
Right angle clamp
Right angle clamp -PASSCrystallizing dishes, BORO 3.3., 1000 ml
Crystallizing dishes, BORO 3.3., 560 ml
Laboratory thermometers, -10...+250C
Glass tube, AR-glass, straight, d = 8 mm, l = 150 mm, 10 pcs.
Glass stopcocks, 1 way, straight
Volumetric pipettes, 10 ml
Safety pipettor Flip
Pipette dish
Graduated cylinder, BORO 3.3, 100 ml
Water jet pump, plastic
Ethyl alcohol, absolute, 500 ml
Olive oil, pure, 100 ml
02416.00
17547.00
37692.00
35720.93
02022.20
46299.01
37718.00
37697.00
02040.55
46245.00
46244.00
38065.00
02412.00
36701.64
36705.00
39282.00
36578.00
36579.00
36592.00
36589.00
36629.00
02728.00
30008.50
30177.10
31246.81
1
1
1
1
1
1
2
2
1
2
2
1
1
1
1
2
1
1
1
1
1
1
1
5
1
Temperature dependency of surtace tension of olive oil.

Surface tension by the ring method
(Du Nouy method)
P2140500
Mechanics
1.4.06-11 Surface tension by the pull-out method with Cobra3

Surface energy
Surface tension
Surface adhesion
Bounding surface
Principle:
The force exerted on a measuring
ring shortly before the liquid film is
torn away is determined with a force
meter. The surface tension is calculated from the diameter of the ring
and the tearing force.
What you need:

Surface tension measuring ring
17547.00
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14515.61
12110.00
Newton Sensor
12110.01
02040.55
Tripod base -PASS-
02002.55
02025.55
Lab jack, 160 x 130 mm
02074.00
Petri dishes, d = 200 mm
64796.00

Surface tension by the pull-out method
with Cobra3
P2140611
Typical measurement values
Tasks:
Determination of the surface tension
of water and other liquids.
Mechanics
Barometric height formula 1.4.07-00

Kinetic gas theory
Pressure
Equation of state
Temperature
Gas constant
Principle:
Glass or steel balls are accelerated by
means of a vibrating plate, and
thereby attain different velocities
(temperature model). The particle
density of the balls is measured as a
function of the height and the vibrational frequency of the plate.
What you need:

Kinetic gas theory apparatus
09060.00
Variable transformer with rectifier 15 V~/12 V-, 5 A
13530.93
11207.30
11076.99
21809.93
03071.01
Tripod base -PASS-
02002.55
02026.55
02040.55
07362.01
07362.04

P2140700
Number of steel balls (m = 0.034 g), as a function of the height h, which pass
through the volume element V in 30 seconds (vibrational frequency 50 Hz).
Tasks:
Measurement of the particle density
as a function of:
1. the height, at fixed frequency
2. the vibrational frequency of the
exciting plate, at fixed height.
Mechanics
1.4.08-00 Lift and drag (resistance to flow)

Resistance to pressure
Frictional resistance
Drag coefficient
Turbulent flow
Laminar flow
Reynolds number
Dynamic pressure
Bernoulli equation
Aerofoil
Induced resistance
Circulation
Angle of incidence
Polar diagram
A) Objects of different cross-section
and shape are placed in a laminar
air stream. The drag is examined
as a function of the flow velocity
and the geometry of the objects.
B) A rectangular plate or an aerofoil
in a stream of air experiences a
buoyant force (lift) and a resistance force (drag). These forces are
determined in relation to area, rate
of flow and angle of incidence.
What you need:

Aerodynamic bodies, set of 14
02787.00
Aerofoil model
02788.00
Pitot tube, Prandtl type
03094.00
Precision manometer
03091.00
Holder with bearing points
02411.00
Double shaft holder
02780.00
Precision pulley
11201.02
Transparent spring balances, 0.2 N
03065.01
03010.00
Blower, mains voltage 220 V
02742.93
Power regulator
32288.93
Pipe probe
02705.00
37716.00
Support base -PASS-
02005.55
1
1
02028.55
Barrel base -PASS-
02006.55
02040.55
Rod with hook
02051.00
Stand tube
02060.00
Pointed rod
02302.00
02412.00
Tasks:
09937.01
39282.00
A) Determination of the drag as a

function of:
B) Determination of the lift and the

drag of flat plates as a function of:
1. the cross-section of different

bodies,
1. the plate area
2. the flow velocity,
3. the angle of incidence (polar diagram)

P2140800
Drag of an object as a function of its cross-sectional area A (q = 0.85 hPa).
3. determination of the drag coefficients cw for objects of various

shape.
2. the dynamic pressure
4. Determination of the pressure distribution over the aerofoil for various angles of incidence.
Mechanics
Vibration of strings 1.5.01-00

Natural vibration
Mass-spring system
Harmonic sound intervals
Principle:
A tensioned metal string is made to
vibrate. The vibrations of the string
are optically scanned, the vibration
process observed on the oscilloscope
and the dependence of the frequency on the string tension and string
length and the density of the material are investigated.
What you need:

String tensioning device with rod
Nickel wire, d = 0.3 mm
Kanthal wire, 19.1 /m, d = 0.3 mm, l = 100 m
Constantan wire, 6.9 /m, d = 0.3 mm
Constantan wire, 0.98 /m, d = 0.4 mm
Copper wire, d = 0.4 mm
Barrel base -PASSBench clamp -PASSSupport rod -PASS-, square, l = 250 mm
Right angle clamp -PASSRod with hook
Sign holder
Striking hammer
Photoelement for optical base plate
Lamp socket E 10, G1
Filament lamps, 6 V/0.5 A
Distributor
Oscilloscope 30 MHz, 2 channels
LF amplifier, 220 V
Plug with push-on sleeve
T type connector, BNC, socket, socket, plug
Screened cable, BNC, l = 30 cm
03431.01
06090.00
06092.00
06101.00
06102.00
06106.02
06106.03
02006.55
02010.00
02025.55
02040.55
02051.00
02066.00
02090.00
03001.00
03060.04
03429.00
08734.00
17049.00
35673.03
06024.00
11459.95
13625.93
13600.93
07542.04
07542.20
07542.26
07542.21
07542.27
07542.11
07542.10
07362.01
07362.04
1
1
1
1
1
1
1
1
3
3
3
1
2
1
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
1

Vibrations of strings
P2150100
Fundamental frequency f as a function of string length l at a given tensioning force F = 30 N.
Tasks:
1. To measure the frequency of a
string (e.g. constantan, 0.4 mm
dia.) as a function of the tensioning force and the length of the
string.
2. To measure the frequency for various types and cross-sections of

string, at a fixed tension and
string length.
Mechanics
1.5.03-11 Velocity of sound in air with Cobra3

Linear relationship between
the propagation time of
sound and its respective path
Longitudinal waves
Velocity of sound
Principle:
The speed of sound in air is determined by measurements of sound
travel times.
What you need:
v /(m/s)
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
338.438
338.448
14511.61
338.753
Measuring microphone with amplifier
03543.00
337.230
07496.10
02036.01
Support
09906.00
Barrel base -PASS-
02006.55
337.258
Table 1
09936.00
07362.01
Tasks:
07362.04
07360.01
Determination of the velocity of

sound in air.
07360.04

P2150311
Mechanics
1.5.04-01/11

Propagation of sound waves
Doppler shift of frequency
Principle:
If a source of sound is in motion relative to its medium of propagation,
the frequency of the waves that are
emitted is displaced due to the
Doppler effect.
Set-up of experiment P2150411 with Cobra3
What you need:
Movement toward
the sound source
Experiment P2150411 with Cobra3

Experiment P2150401 with yt recorder
Power frequency generator, 1 MHz
13650.93
Yt recorder, 1 channel
11414.95
03001.00
03071.01
Measuring microphone
03542.00
07496.10
Loudspeaker/Sound head
03524.00
Car, motor driven
11061.00
Attachment for car
11061.02
Battery cell, 1.5 V, baby size, type C
07922.01
Barrel base -PASS-
02006.55
Stand tube
02060.00
Movement away from

the sound source
v /m/s
0.162
0.157
v /m/s
0.159
0.156
v /m/s
0.158
0.157
v /m/s
0.159
0.156
Mean
v /m/s
0.160
0.157
Mean
fmeasured/Hz
16199
16184
fcalculated/Hz
16199.6
16184.5
Table
07364.04
Tasks:
1 Track, l = 900 mm
11606.00
The frequency changes are measured

and analysed for different relative
velocities of source and observer.
Connecting cord, 32 A, l = 1500 mm, red
07364.01
07359.01
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
Support
14602.00
07363.01
07363.04
2
1
09906.00
14511.61
Function generator
13652.93
07542.27
Double socket, pair red and black
07264.00
03065.20
Plug with socket and crosshole, 2 pcs.
07206.01
11202.03
02037.00
11207.20
Bosshead
02043.00

P21504 01/11
Mechanics
1.5.05-15 Chladni figures with FG-Module

Wavelength
Stationary waves
Natural vibrations
Two-dimensional standing
waves
Principle:
To show the two-dimensional standing waves on the surface of a square
or circular plate.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
Software Cobra3 PowerGraph
14525.61
Measuring module Function Generator
12111.00
LF amplifier, 220 V
13625.93
03524.00
Sound pattern plates
03478.00
Support base, variable
02001.00
Bosshead
02043.00
02031.00
Stand tube
02060.00
07542.27
07542.11
07361.01
07361.04

P2150515
Two dimensional oscillation of quadratic plates.
You can find more

experiments in Handbook
Physics Experiments
with Cobra3
Order No. 01310.02
Tasks:
A frequency generator is connected
to a sound head. The sound head
drives a Chaldni plate. White sand is
sprinkled randomly to cover the entire black surface of the plate.
Drive the plate at a predetermined
harmonic frequency and the sand
will migrate into the nodal regions. A
well defined standing wave pattern

can be clearly seen in the first photo.
The circular and square Chladni
plates will create characteristic patterns. Adjust the oscillator slowly in
the 0.2 to 2 kHz frequency range and
watch for the pattern to emerge
when a harmonic is tuned.
Mechanics
1.5.06-01/15

Longitudinal waves
Sound velocity in gases and
solids
Frequency
Wavelength
Stationary waves
Natural vibrations
Principle:
A metal rod is made to vibrate longitudinally by rubbing it with a cloth.
The gas column in a glass tube is
caused to vibrate naturally as a
result of resonance, through the
radiation of sound from a disc
attached to the end of the rod.
The ratio of the velocities of sound in
the gas and in the vibration generator is determined by measuring the
wavelength.
Set-up of experiment P2150615 with FG-Module
What you need:

Experiment P2150615 with FG-Module
Exp. P2150601 with vibration generator
Cobra3 BASIC-UNIT
Power supply 12V/2A
LF amplifier, 220 V
Cork powder, 3 g
Universal clamp
Charging strip
Tuning piston
Vibration generator, brass
Vibration generator, steel
Lycopodium powder, 10 g
Laboratory thermometers, -10...+ 30C
Bench clamp -PASSMeter Scale, l = 1000 x 27 mm
Pressure-reducing valves, CO2 / He
Steel cylinders, carbon dioxide, 10 l
Wrench for steel cylinders
Glass tube, AR-glass, straight,
d = 8 mm, l = 80 mm, 10 pcs.
Rubber stopper, d = 38/31 mm, 1 hole, d = 7 mm
12150.00
12151.99
14602.00
14525.61
12111.00
13625.93
03524.00
02001.00
07542.27
07542.11
07361.01
07361.04
03918.00
03477.00
37718.00
03474.01
03474.02
03476.01
03476.02
02715.00
05949.00
02010.00
03001.00
33481.00
41761.00
40322.00
1
1
4
1
1
1
1
1
1
4
1
1
1
1
36701.65
39260.01
39282.00
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2

P21506 01/15
Positions of the vibration nodes as a function of the number of nodes.
Tasks:
1. To measure the wavelength of stationary waves using a steel or a
brass rod as the vibration generator. The longitudinal velocity of
sound in the material of the vibration generator is determined,
given the velocity of sound in air.
2. To measure the wavelength for
CO2, and to determine the sound
velocity in CO2 from the ratios of
the wavelengths in air determined
in 1. above.
Mechanics
1.5.07-01/15
Wavelengths and frequencies with a Quincke tube

Transverse and longitudinal
waves
Wavelength
Amplitude
Frequency
Phase shift
Interference
Velocity of sound in air
Loudness
Weber-Fechner law
Principle:
If a sound wave of a particular frequency is divided into two coherent
components (like, for example, light
waves in an interferometer experiment), and if the path of one of the
component waves is altered, it is
possible to calculate the wavelength
of the sound wave and its frequency
from the interference phenomena
recorded with a microphone.
What you need:

Experiment P2150701 with multimeter
Interference tube, Quincke type
03482.00
03542.00
13650.93
07128.00
07542.27
03524.00
03010.00
Connecting cable, 4 mm plug, 32 A, red, l = 150 cm 07364.01
Support base -PASS02005.55
02027.55
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
12111.00
14525.61
LF amplifier, 220 V
13625.93
Connection box
06030.23
Carbon resistor 10 , 1W, G1
39104.01
03543.00
Support
09906.00
07361.01
07361.04
07359.01
1
1
1
1
1
1
1
2
1
1
2
5
1
1
1
1
1
2
5
1
2
1
1
1
1
1
1
1
1
1
1
1
Interference of sound waves in a Quincke tube. Sound amplitude as a function of the displacement d.
Tasks:
1. Record of the extension of a
Quincke tube for given frequencies in the range 2000 Hz to 6000
Hz.
2. Calculation of the frequencies
from the wavelengths determined,
comparison with the given frequencies.

Wavelengths and frequencies
with a Quincke tube
P21507 01/15
Mechanics
Resonance frequencies of Helmholtz resonators with Cobra3 1.5.08-11

Cavity resonator
Resonance frequency
Acoustic resonant circuit
Principle:
Acoustic cavity resonators posses a
characteristic frequency which is determined by their geometrical form.
In this case the resonator is excited
to vibrations in its resonance frequency by background noise.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
Software Cobra3 Fourier Analysis
14514.61
03543.00
07496.10
45126.01
Tripod base -PASS-
02002.55
02032.00
Universal clamp
37718.00
Bosshead
02043.00
09936.00
Long-neck round-bottom flask, 1000 ml
36050.00
Long-neck round-bottom flask, 1000 ml
36046.00
07361.04
07361.01

Resonance frequencies of Helmholtz
resonators with Cobra3
P2150811
Time signal, spectrum and parameter settings for measurements on the empty
1000 ml round-bottomed flask.
Tasks:
Determination of different resonance
frequencies of a resonator depending
on the volume.
Mechanics
1.5.09-11 Interference of acoustic waves, stationary waves and diffraction at a slot with PC interface
Interference
Reflection
Diffraction
Acoustic waves
Stationary waves
Huygens-Fresnel principle
Use of an interface
Principle:
Two acoustic sources emit waves
of the same frequency and if their
distance is a multiple of the wavelength, an interference structure
becomes apparent in the space
where the waves are superimposed.
An acoustic wave impinges perpendicularly onto a reflector, the
incident and the reflected wave
are superimposed to a stationary
wave. In case of reflection, a pressure antinode will always occur at
the point of reflection.
What you need:

03524.00
03542.00
07496.10
Screen, metal, 300 mm x 300 mm
08062.00
Function generator
13652.93
02040.55
Stand tube
02060.00
Barrel base -PASS-
02006.55
Bench clamp -PASS-
02010.00
02062.00
03001.00
02412.00
02407.00
07363.01
07363.04
12004.10
07542.27
07542.20
Power supply 12V/2A
12151.99
Cobra3 BASIC-UNIT
12150.00
14515.61
07361.01
07361.04
14602.00
Measurement example, stationary waves.
Tasks:
1. To measure the interference of
acoustic waves.
2. To analyze the reflection of acoustic waves stationary waves.
3. To measure the diffraction at a
slot of acoustic waves.
An acoustic wave impinges on a

sufficiently narrow slot, it is diffracted into the geometrical shadow spaces. The diffraction and the
interference pattern occurring
behind the slot can be explained
by means of the Huygens-Fresnel
principle and confirm the wave
characteristics of sound.

Interference of acoustic waves, stationary waves
and diffraction at a slot with PC interface P2150911
Mechanics
Optical determination of velocity of sound in liquids 1.5.10-00

Ultrasonics
Sound velocity
Frequency
Wavelength
Sound pressure
Stationary waves
Principle:
A stationary ultrasonic wave in a
glass cell full of liquid is traversed by
a divergent beam of light. The sound
wavelength can be determined from
the central projection of the sound
field on the basis of the refractive
index which canges with the sound
pressure.
What you need:

Ultrasonic generator
13920.99
Laser, He-Ne 1.0 mW, 230 VAC
08181.93
Glass cell, 150 x 55 x 100 mm
03504.00
Lens holder
08012.00
Lens, mounted, f = +20 mm
08018.01
08062.00
Optical profile bench, l = 1000 mm
08282.00
Base for optical profile bench, adjustable
08284.00
Slide mount for optical profil bench, h = 80 mm
08286.02
08286.01
Swinging arm
08256.00
Table top on rod
08060.00
05949.00
02040.55
02031.00
Universal clamp
37718.00
Glycerol, 250 ml
30084.25
31246.81

Optical determination of velocity
of sound in liquids
P2151000
Image of a screen.
Tasks:
To determine the wavelength of
sound in liquids, and from this calucate the sound velocity, from the
structure of the centrally projected
image.
Mechanics
1.5.11-00 Phase and group velocity of ultrasonics in liquids

Longitudinal waves
Velocity of sound in liquids
Wavelength
Frequency
Piezoelectric effect
Piezoelectric ultrasonics
transformer
Principle:
The sound waves transmitted to a
liquid by the ultrasonic generator are
picked up by a piezoelectric ultrasonic pick-up and the signal from
transmitter and receiver compared
on an oscilloscope.
The wavelength is determined and
the phase velocity calculated from
the relative phase position of the
signals. The group velocity is determined from measurements of the
sound pulse delay time.
What you need:

Ultrasonic pickup
13920.00
13920.99
03504.00
Insulating support
07924.00
1
1
08283.00
08284.00
08286.01
08286.02
Table top on rod
08060.00
Swinging arm
08256.00
02040.55
02032.00
Universal clamp
37718.00
11459.95
07359.01
07542.11
07542.27
05949.00
Glycerol, 250 ml
30084.25
30155.50
31246.81

Phase and group velocity of ultrasonics
in liquids
P2151100
Detector displacement l as a function of the number n of wavelengths covered, for water, glycerol and sodium chloride solution (temperature = 25 C).
Tasks:
The signals from the ultrasonic generator and the ultrasonic pick-up are
recorded on the oscilloscope.
2.1. To determine the oscilloscopes

coefficient of sweep with the aid
of the ultrasonic frequency.
1. To measure the relative phase

position of the signal from the
ultrasonic pick-up as a function of
its distance from the ultrasonic
generator (which is in the sine
mode), and to determine the
ultrasonic wavelength and the
phase velocity when the frequency is known.
2.2. With the generator in the pulsed

mode, to record the delay time
of the sound pulses as a function
of the distance between a generator and the pick-up, and to
determine the group velocity.
Mechanics
Temperature dependence of the Velocity of sound in liquids 1.5.12-00

Wavelength
Frequency
Velocity of sound in liquids
Compressibility
Density
Ultrasonics
Piezoelectric ultrasonic
transducer
Principle:
Sound waves are radiated into a liquid by an ultrasonic transmitter and
detected with a piezoelectric transducer. The wavelength of the sound
is found by comparing the phase of
the detector signal for different
sound paths and, when the frequency is known, the velocity of sound as
a function of the temperature of the
liquid is determined.
What you need:

Ultrasonic pickup
13920.00
13920.99
Sliding device, horizontal
08713.00
08283.00
08284.00
08286.01
Swinging arm
08256.00
Insulating support
07924.00
08492.93
08492.01
08487.02
38056.00
11459.95
02030.00
02040.55
37716.00
07542.11
07542.27
Glycerol, 250 ml
30084.25
31246.81
07359.01
Slide mount
08286.00
1
Velocity of sound in water as a function of the temperature.

Temperature dependence of the Velocity
of sound in liquids
P2151200
Tasks:
The wavelength is found from the
phase position of the sound pickup
signal relative to the generator signal as a function of the sound path
and the velocity of the sound is de-
termined when the ultrasonic frequency is known. The measurement

is made for water and glycerol as the
temperatures of the liquids are
changed step-by-step.
Mechanics
1.5.13-00 Stationary ultrasonic waves, determination of wavelength

Longitudinal waves
Superposition of waves
Reflection of longitudinal
waves
Stationary longitudinal waves
Principle:
An ultrasonic wave is subjected to
surface reflection from a metal plate.
The reflected wave superimposes on
the incident wave, coincident in
phase and amplitude, to form a
standing wave. The intensity of this
wave along the direction of propagation is measured using a movable ultrasonic receiver.
What you need:

Ultrasound operation unit
13900.00
13900.99
Ultrasonic transmitter
13901.00
Ultrasonic receiver on stem
13902.00
07128.00
08283.00
08284.00
08286.02
08286.01
08713.00
Swinging arm
08256.00
08062.00
07361.01
07361.04

Stationary ultrasonic waves, determination
of wavelength
P2151300
The change in the sound pressure intensity in the direction of propagation as

a function of the distance.
Tasks:
1. Determine the intensity of a
standing ultrasonic wave by moving an ultrasonic receiver along
the direction of propagation.
2. Plot a graph of the measured values as a function of the distance.
3. Determine the wavelength of the
ultrasonic wave.
Mechanics
Absorption of ultrasonic in air 1.5.14-00

Longitudinal waves
Plane waves
Spherical waves
Sound pressure
Alternating sound pressure
Sound intensity
Absorption coefficient of
ultrasonic waves
Law of absorption
Principle:
Sound needs a material medium with
which it can enter into reciprocal action for its propagation, whereby a
loss of energy occurs. The amplitude,
and so also the intensity, decreases
along the propagation path.
What you need:

13900.00
13900.99
13901.00
13902.00
07128.00
08281.00
08284.00
08286.02
07361.01
07361.04

P2151400
The change in sound pressure intensity as a function of the distance from the
source of sound.
Tasks:
1. Move an ultrasonic receiver along
the direction of propagation of a
sound wave to measure the sound
intensity as a function of the distance from the source of the
sound.
2. Plot linear and logarithmic graphs
of the values of the sound intensity as a function of the distance.
3. Confirm the law of absorption and
determine the absorption coefficient.
4. Verify that the emitted wave is a
spherical wave near to the transmitter.
Mechanics
1.5.15-15 Ultrasonic diffraction at different single and double slit systems

Longitudinal waves
Huygens principle
Interference
Fraunhofer and Fresnel
diffraction
Principle:
A plane ultrasonic wave is subjected
to diffraction at single slits of various widths and at various double
slits. The intensity of the diffracted
and interfering partial waves are automatically recorded using a motordriven, swivel ultrasound detector
and a PC.
What you need:

Goniometer with reflecting mirror
13903.00
Goniometer Operation Unit
13903.99
13900.00
13900.99
13901.00
13902.00
Object holder for goniometer
13904.00
Diffraction objects for ultrasonic
13905.00
14602.00
09936.00
07542.11
07542.27
Software Goniometer
14523.61

Ultrasonic diffraction at different single
P2151515
The angular distribution of the intensity of a plane ultrasonic wave diffracted at a slit.
Tasks:
1. Record the intensity of an ultrasonic wave diffracted by various
slits and double slits as a function
of diffraction angle.
2. Determine the angular positions
of the maximum and minimum
values and compare them with the
theoretical results.
Mechanics
Ultrasonic diffraction at different multiple slit systems 1.5.16-15

Longitudinal waves
Huygens principle
Interference
diffraction
Principle:
An ultrasonic plane wave is subjected to diffraction at various multiple
slits. The intensity of the diffracted
and interfering partial waves are automatically recorded using a motordriven, swivel ultrasound detector
and a PC.
What you need:

13903.00
13903.99
13900.00
13900.99
13901.00
13902.00
13904.00
Diffraction objects for ultrasonic
13905.00
14602.00
09936.00
03010.00
07542.11
07542.27
Software Goniometer
14523.61

Ultrasonic diffraction at different multiple
slit systems
P2151615
The angular distribution of the intensity of a plane ultrasonic wave diffracted by a fourfold slit.
Tasks:
1. Determine the angular distribution of a plane ultrasonic wave
diffracted by various multiple slits.
of the maximum and mininum
values and compare them with the
theoretical values.
Mechanics
1.5.17-15 Diffraction of ultrasonic waves at a pin hole and a circular obstacle

Longitudinal waves
Huygens principle
Interference
diffraction
Poissons spot
Babinets theorem
Bessel function
Principle:
An ultrasonic plane wave is subjected to diffraction by a pin-hole obstacle and a complementary circular
obstacle. The intensity distribution of
the diffracted and interfering partial
waves are automatically recorded
using a motor-driven, swivel ultrasound detector and a PC.
What you need:

13903.00
13903.99
13900.00
13900.99
13901.00
13902.00
13904.00
Pin hole and circular obstacle for ultrasonic
13906.00
14602.00
09936.00
07542.11
07542.27
Software Goniometer
14523.61

Diffraction of ultrasonic waves at a pin hole
and a circular obstacle
P2151715
The angular distribution of the intensity of a plane ultrasonic wave diffracted by a pin-hole obstacle.
Tasks:
1. Determine the angular distribution of an ultrasonic wave
diffracted by a pin-hole and circular obstacle.
2. Compare the angular positions of
the minimum intensities with the
theoretical values.
Mechanics
Ultrasonic diffraction at Fresnel lenses / Fresnels zone contruction 1.5.18-00

Longitudinal waves
Huygens principle
Interference
diffraction
Zone plates
Principle:
An ultrasonic plane wave strikes a
Fresnel zone plate. The ultrasonic intensity is determined as a function of
the distance behind the plate, using
an ultrasonic detector that can be
moved in the direction of the zone
plate axis.
What you need:

13900.00
13900.99
13901.00
13902.00
Fresnel zone plates for ultrasonic
13907.00
07128.00
08281.00
08284.00
Slide mount
08286.00
Stand tube
02060.00
02062.00
07361.01
07361.04

Ultrasonic diffraction at Fresnel lenses /
Fresnels zone contruction
P2151800
Graph of the intensity of the ultrasound as a function of the distance from a

Fresnel zone plate( curve a ); curve b without zone plate.
Tasks:
1. Determine and plot graphs of the
intensity of the ultrasonic behind
different Fresnel zone plates as a
function of the distance behind
the plates.
2. Carry out the same measurement
series without a plate.
3. Determine the image width at
each distance of the transmitter
from the zone plate and compare
the values obtained with those
theoretically expected.
Mechanics
1.5.19-15 Interference of two identical ultrasonic transmitters

Longitudinal waves
Sound pressure
Huygens principle
Interference
diffraction
Principle:
Ultrasonic waves of the same frequence, amplitude and direction of
propagation are generated by two
sources positioned parallel to each
other. The sources can vibrate both
in-phase and out-of phase. The angular distribution of the intensity of
the waves, which interfere with each
other, is automatically recorded
using a motor-driven ultrasonic detector and a PC.
What you need:

13903.00
13903.99
13900.00
13900.99
13901.00
13902.00
Barrel base -PASS-
02006.55
14602.00
09936.00
07542.11
07542.27
Software Goniometer
14523.61

Interference of two indentical ultrasonic
transmitters
P2151915
Angular distribution of the intensity of two interfering ultrasonic waves having the same phase, amplitude, frequency and direction of propagation.
Tasks:
1. Determine the angular distribution of the sound pressure of two
ultrasonic transmitters vibrating
in-phase.
of the interference minima and
compare the values found with
those theoretically expected.
3. Repeat the measurements with
the two ultrasonic transmitters vibrating out-of-phase.
4. Repeat the first measurement and
additionally determine with the
angular distribution of the sound
pressure of each single transmitter.
Mechanics
Interference of ultrasonic waves by a Lloyd mirror 1.5.20-00

Longitudinal waves
waves
Interference
Principle:
A partial packet of radiation passes
directly from a fixed ultrasonic
transmitter to a fixed ultrasonic receiver. A further partial packet hits
against a metal screen that is positioned parallel to the connecting line
between the transmitter and receiver, and is reflected in the direction of
the receiver. The two packets of radiation interfere with each other at
the receiver. When the reflector is
moved parallel to itself, the difference in the path lengths of the two
packets changes. According to this
difference, either constructive or destructive interference occurs.
What you need:

13900.00
13900.99
13901.00
13902.00
07128.00
08283.00
08284.00
08286.02
Slide mount
08286.00
08713.00
Swinging arm
08256.00
08062.00
09936.00
07361.01
07361.04

Interference of ultrasonic waves
by a Lloyd mirror
P2152000
The received signal as a function of the reflector distance d.
Tasks:
1. The sliding device is to be used to
move the reflector screen positioned parallel to the connecting
line between the transmitter and
receiver parallel to itself in steps
of d = (0.5-1) mm. The reflector
voltage U is to be recorded at each
step.
2. The d values of the various maxima and minima are to be determined from the U = U(d) graph
and compared with the theoretically expected values.
Mechanics
1.5.21-15 Determination of the velocity of sound (sonar principle)

Longitudinal waves
Sound pressure
Phase- and group velocity
Sonar principle
Principle:
An ultrasonic transmitter emits
sound pulses onto a reflector, from
which recording of them by a receiver shows a time delay. The velocity of
sound is calculated from the path
length and transmission time of the
sound pulses.
What you need:

13900.00
13900.99
13901.00
13902.00
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
Barrel base -PASS-
02006.55
08062.00
09936.00
03001.00
07542.11
07542.27
14504.61
Measured time between the transmitted and the received reflected ultrasonic
waves.

Determination of the velocity of sound
(sonar principle)
P2152115
Tasks:
1. Determine transmission times for
different distances apart of the
transmitter and the receiver.
2. Plot a graph of the path lengths of
the sound pulses against their
transmission time.
3. Determine the velocity of sound
from the graph.
Mechanics
Ultrasonic Michelson-Interferometer 1.5.22-00

Longitudinal waves
waves
Interference
Interferometer
Principle:
A semi-permeable membrane divides an ultrasonic wave into two
partial packets which travel at right
angles to each other. They are subsequently reflected at different hard
metal reflectors, one of which is fixed
in position, and the other of which
can be displaced in the direction of
the beam, before being reunited.
Shifting the displaceable reflector
changes the path length of the corresponding packet, so that superpositioning of the reunited partial packets gives maxima and minima of the
alternating sound pressure according
to the differenc in the distance travelled. The wavelength of the ultrasound can be determined from these.
What you need:

13900.00
13900.99
13901.00
13902.00
Multi range meter, analogue
07028.01
08283.00
08284.00
08286.02
08286.01
08713.00
08062.00
Screen, translucent, 250 mm x 250 mm
08064.00
Barrel base -PASS-
02006.55
Stand tube
02060.00
09936.00
07361.01
07361.04

P2152200
Intensity of the alternating sound pressure as a function of the displacement
d of reflector screen Sc2.
Tasks:
1. Determine the intensity of the
alternating sound pressure in dependence on the displacement of
one of the reflectors.
2. Calculate the wavelength of the
ultrasound from the measurement
curve.
Mechanics
1.5.23-00 Ultrasonic diffraction by a straight edge

Longitudinal waves
Huygens principle
Interference
diffraction
Fresnel zones
Fresnel integrals
Cornus spiral
Principle:
An ultrasonic wave hits a straight
edge which limits the wave field to
one side. According to Huygens
principle, the edge is a point source
for secondary waves, and these penetrate also into the shaded area of
the edge. In the transmission range,
secondary waves interfere with the
primary waves, so that a succession
of maxima and minima of the alternating sound pressure are created
transverse to the edge.
What you need:

13900.00
13900.99
13901.00
13902.00
07028.01
08283.00
08284.00
08286.02
08062.00
Barrel base -PASS-
02006.55
Tripod base -PASS-
02002.55
02040.55
02026.55
Stand tube
02060.00
09936.00
07361.01
07361.04

P2152300
Diffraction at an edge: Course of intensity of the alternating sound pressure

as function of position coordinate x.
Tasks:
1. Determine the intensity distribution of an ultrasonic wave
diffracted at a straight edge as a
function of the transverse distance from the edge.
2. Compare the positions of the
maxima and minima found in the
experiment to those theoretically
expected.
3. Repeat the measurement of the
intensity distribution of the ultrasonic wave without the straight
edge.
Mechanics
Ultrasonic Doppler effect 1.5.24-15

Superimposition of sound
waves
Longitudinal waves
Principle:
If a source of sound is in motion relative to its medium of propagation,
the frequency of the waves that are
emitted is displaced due to the
Doppler effect.
What you need:

13900.00
13900.99
13901.00
13902.00
Car, motor driven
11061.00
Attachment for car
11061.02
Battery cell, 1.5 V, baby size, type C
07922.01
Barrel base -PASS-
02006.55
Stand tube
02060.00
07363.01
07363.02
07363.04
07359.02
07542.11
07542.27
1 Track, l = 900 mm
11606.00
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
Tasks:
14602.00
14511.61
The frequency changes are measured

and analysed for different relative
velocities of source and observer.
07264.00
Electrode holder, slewable
18461.88
11202.03
02037.00
11207.20
Bosshead
02043.00
03065.20
Doppler shift of frequency.

P2152415
Mechanics
Handbooks

In the experimental literature Linear Motion you will find detailed descriptions of
experiments regarding the following concepts:
Uniform acceleration and deceleration
Momentum (elastic and inelastic collision)
Newtons laws
Potential and kinetic energy
Grade resistance/inclined plane
Almost all experiments can be performed either with the 2 m long air track 11202.17 or
with the 1.5 m long demonstration track 11305.00. For the measurements and data recording you can use the Cobra3 interface 12150.00, the 4-4 Timer 13605.99 or the 6-decade
digital counter 13603.93.
Physics Experiments Linear Motion No. 16001.02 15 Experiments described
1.1
P1198511
The linear uniform motion
2.1
P1198615
Uniformly accelerated motion
with an accelerating mass
2.2
P1198702
Uniformly accelerated motion
with a jet glider
2.3
P1198805
Uniformly accelerated motion with
an inclined track
2.4
P1198906
Uniformly decelerated motion
2.5
The free fall
P1199000
4.1
P1199502
Impulse and momentum
4.2
P1199605
in elastic collisions
4.3
P1199711
Conservation of momentum in
inelastic collisions
4.4
P1199801
in multiple elastic collisions
4.5
P1199902
in multiple inelastic collisions
Newtons second law with Cobra3 and demonstration track.
3.1
P1199115
Law of inertia (Newton's 1st law)
3.2
P1199201
Fundamental law of dynamics
(Newton's 2nd Law)
3.3
P1199306
Law of reciprocal actions
(Newton's 3rd Law)
3.4
P1199405
Equivalence of inert mass
and heavy mass
Conservation of momentum in multiple inelastic collisions with 4-4 Timer and

air track.
Mechanics
Handbooks

The use of the demonstration board for physics offers the following
advantages for the lecturer:
Minimal preparation time
DEMONSTRATION EXPERIMENTS
PHYSICS
Winfried Rssler
Georg Schollmeyer
Lucid and simple set-up

Labelling of the experiment directly on the board
Magnet-held arrows, linear and angular scales
Stable storage box
Both sides of board can be used for mechanics and optics
Galvanised sheet steel board in aluminium profile frame
Mechanics side: lacquered
01152.02
Optic side: white foil with lined grid
Physics Demonstration Experiments Magnet Board Mechanics 1 No. 01152.02 31 described Experiments
Please ask for a complete equipment list Ref. No. 21701
2 Simple machines
1 Forces
MT 1.1
Mass and weight
(12516)
MT 1.2
(12517)
Extension of a rubber band
and helical spring
MT 2.1
Double-sided lever
(12531)
MT 2.2
One-sided lever
(12532)
MT 2.3
(12533)
Double-sided lever and more than
two forces
MT 1.3
Hookes law
(12518)
MT 1.4
Making and calibrating a
dynamometer
(12519)
MT 1.5
Bending a leaf spring
(12520)
MT 2.5
(12535)
Moment of rotation (torque)
(12521)
MT 2.6
Beam balance
(12536)
MT 1.6
Force and counterforce
MT 2.7
Sliding weight balance
(12537)
MT 2.8
Fixed pulley
(12538)
MT 2.9
Free pulley
(12539)
MT 2.10
Block and tackle
(12540)
MT 2.11
Step wheel
(12541)
MT 2.12
Toothed-gearing
(12542)
MT 2.13
Belt drives
(12543)
MT 1.7
(12522)
Composition of forces having
the same line of application
MT 1.8
(12523)
Composition of non-parallel forces
MT 1.9
(12524)
Resolution of a force into
two non-parallel forces
MT 1.10
(12525)
Resolution of forces on an inclined
plane
MT 1.11
(12526)
Resolution of forces on a crane
MT 1.12
(12527)
Restoring force on a displaced
pendulum
MT 1.13
(12528)
Determination of the centre of
gravity of an irregular plate
MT 1.14
Frictional force
(12529)
MT 1.15
(12530)
Determination of the coefficient of
friction on an inclined plane
MT 2.4
Reaction at the supports
(12534)
Resolution of forces on an inclined plane (MT 1.10)
3 Oscillations
MT 3.1
Thread pendulum
(12544)
MT 3.2
Spring pendulum
(12545)
MT 3.3
Physical pendulum
(reversible pendulum)
(12546)
Fixed pulley (MT 2.8)
Mechanics
Handbooks

The use of the demonstration board for physics offers the following advantages
for the lecturer:
Minimal preparation time
PHYSICS
Winfried Rssler
Georg Schollmeyer
Lucid and simple set-up

Labelling of the experiment directly on the board
Magnet-held arrows, linear and angular scales
Stable storage box
Both sides of board can be used for mechanics and optics
Galvanised sheet steel board in aluminium profile frame
Mechanics side: lacquered
01152.02
Optic side: white foil with lined grid
Physics Demonstration Experiments Magnet Board Mechanics 2 No. 01153.02 18 described Experiments
4 Movement
MT 4.1
(12960)
Uniform rectilinear movement
6 Mechanics of Fluids
and Gases
MT 6.1
U-tube manometer
(12967)
MT 6.2
Hydrostatic pressure
(12968)
MT 4.3
(12962)
Horizontal and sloping trajectories
MT 5.3
Communicating vessels
(12969)
MT 4.4
Newtons basic principle
MT 6.4
Hydraulic press
(12970)
MT 6.5
Artesian well
(12971)
MT 6.6
Archimedes principle
(12972)
MT 4.2
(12961)
Uniform accelerated rectilinear
movement
(12963)
5 Forms of Mechanical Energy

MT 5.1
(12964)
Energy transformation during
upward and downward runs
MT 5.2
Kinetic energy
MT 5.3
Energy of refraction
(12965)
(12966)
MT 6.7
(12973)
Density determination by measuring
buoyancy
Energy transformation during upward and downward runs (MT 5.1)
MT 6.8
(12974)
Discharge velocity of a vessel
MT 6.9
Pressure in flowing fluids
(12975)
MT 6.10
Pressure in gases
(12976)
MT 6.11
Boyle and Mariottes law
(12977)
Horizontal and sloping trajectories (MT 4.3)
2
Optics
2
Optics
Contents
2.1
Geometrical Optics
2.5
Polarisation
2.1.01-00 Measuring the velocity of light
2.5.01-00 Polarisation by quarterwave plates
2.1.02-00 Laws of lenses and optical instruments
2.5.02-00 Polarimetry
2.1.03-00 Dispersion and resolving power of the prism and grating spectroscope
2.5.03-00 Fresnels equations theory of reflection
2.2
Interference
2.2.01-00 Interference of light
2.5.04-00 Malus law

2.6
Applied Optics
2.2.02-00 Newtons rings
2.6.01-00 Faraday effect
2.2.03-00 Interference at a mica plate according to Pohl
2.6.02-00 Kerr effect
2.2.04-00 Fresnels zone construction / zone plate
2.6.03-00 Recording and reconstruction of holograms
2.2.05-00 Michelson interferometer
2.6.04-00 CO2-laser
2.2.06-00 Coherence and width of spectral lines with Michelson interferometer
2.6.05-11 LDA Laser Doppler Anemometry with Cobra3
2.2.07-00 Refraction index of air and CO2 with Michelson interferometer
2.6.07-01 Helium Neon Laser
2.3
Diffraction
2.3.01-00 Diffraction at a slit and Heisenbergs uncertainty principle

2.3.02-00 Diffraction of light at a slit and an edge
2.3.03-00 Intensity of diffractions due to pin hole diaphragms
and circular obstacles
2.3.04-00 Diffraction intensity of multiple slits and grids
2.3.05-00 Determination of the diffraction intensity at slit
2.6.08-00 Optical pumping

2.6.09-00 Nd-YAG laser
2.6.10-00 Fibre optics
2.6.11-00 Fourier optics 2f Arrangement
2.6.12-00 Fourier optics 4f Arrangement Filtering and reconstruction
2.7
Handbooks
Advanced Optics and Laser Physics
2.3.06-00 Diffraction intensity through a slit and a wire Babinets theorem

2.4
Photometry
2.4.02-01 Photometric law of distance

2.4.02-11 Photometric law of distance with Cobra3
2.4.04-00 Lamberts law
Optics
Geometrical Optics
Measuring the velocity of light 2.1.01-00

Refractive index
Wavelength
Frequency
Phase
Modulation
Electric field constant
Magnetic field constant
Principle:
The intensity of the light is modulated and the phase relationship of the
transmitter and receiver signal compared. The velocity of light is calculated from the relationship between
the changes in the phase and the
light path.
What you need:

Light velocity measuring apparatus
11224.93
07542.12
11459.95
Block, synthetic resin
06870.00

Measuring the velocity of light
P2210100
Measuring the velocity of light in other media.
Tasks:
1. To determine the velocity of light
in air.
2. To determine the velocity of light
in water and synthetic resin and
to calculate the refractive indices.
Optics
Geometrical Optics
2.1.02-00 Laws of lenses and optical instruments

Law of lenses
Magnification
Focal length
Object distance
Telescope
Microscope
Path of a ray
Convex lens
Concave lens
Real image
Virtual image
Principle:
The focal lengths of unknown lenses
are determined by measuring the
distances of image and object and by
Bessels method. Simple optical
instruments are then constructed
with these lenses.
What you need:

08018.01
08020.01
08021.01
08023.01
Lens, mounted, f = -50 mm
08026.01
08028.01
08064.00
Screen with arrow slit
08133.01
Ground glass screen, 50 mm d = 50 mm
08136.01
Double condenser, f = 60 mm
08137.00
Object micrometer 1mm i.100 parts
62171.19
Ctenocephalus, msl
87337.10
Slide -Emperor Maximilian-
82140.00
08282.00
Tasks:
08284.00
08286.01
08286.02
1. To determine the focal length of

two unknown convex lenses by
measuring the distances of image
and object.
Diaphragm holder for optical base plate
08040.00
Lens holder
08012.00
Condenser holder
08015.00
Swinging arm
08256.00
Experimenting lamp 5, with stem
11601.10
13505.93
07361.04
09937.01

Laws of lenses and optical instruments
P2210200
Path of a ray in Galileo telescope.
2. To determine the focal length of a

convex lens and of a combination
of a convex and a concave lens
using Bessels method.
3. To construct the following optical
instruments:
1. Slide projector; image scale to
be determined
2. Microscope; magnification to
be determined
3. Kepler-type telescope
4. Galileos telescope
(opera glasses).
Optics
Geometrical Optics
Dispersion and resolving power of the prism and grating spectroscope 2.1.03-00
Maxwell relationship
Dispersion
Polarizability
Refractive index
Prism
Rowland grating
Spectrometer-goniometer
Principle:
The refractive indices of liquids,
crown glass and flint glass are determined as a function of the wavelength by refraction of light through
the prism at minimum deviation. The
resolving power of the glass prisms is
determined from the dispersion
curve.
Tasks:
1. To adjust the spectrometer-goniometer.
2. To determine the refractive index
of various liquids in a hollow prism.
What you need:

Spectrometer/goniometer with verniers
35635.02
Lamp holder, pico 9, for spectral lamps
08119.00
Spectral lamp Hg 100, pico 9 base
08120.14
Power supply for spectral lamps
13662.97
Prism, 60, Crownglass, h = 30 mm
08231.00
Hollow prism 60, l = 60 mm, h = 60 mm
08240.00
Diffraction grating, 4 lines/mm
08532.00
08534.00
Diffraction grating,10 lines/mm
08540.00
08543.00
08546.00
03010.00
Barrel base -PASS-
02006.55
02040.55
1
1
02025.55
Bench clamp -PASS-
02010.00
Stand tube
02060.00
33930.00
Glycerol, 250 ml
30084.25
Methanol 500 ml
30142.50
Cyclohexane for synthesis, 100 ml
31236.10

Dispersion and resolving power of the prism
and grating spectroscope
P2210300
Dispersion curves of various substances.
3. To determine the refractive index

of various glass prism.
4. To determine the wavelengths of
the mercury spectral lines.
5. To demonstrate the relationship
between refractive index and
wavelength (dispersion curve).
6. To calculate the resolving power
of the glass prisms from the slope
of the dispersion curves.
7. Determination of the grating constant of a Rowland grating based

on the diffraction angle (up to the
third order) of the high intensity
spectral lines of mercury.
8. Determination of the angular dispersion of a grating.
9. Determination of the resolving
power required to separate the
different Hg-Lines. Comparison
with theory.
Optics
Interference
2.2.01-00 Interference of light

Wavelength
Phase
Fresnel biprism
Fresnel mirror
Virtual light source
Principle:
By dividing up the wave-front of a
beam of light at the Fresnel mirror
and the Fresnel biprism, interference
is produced. The wavelength is determined from the interference patterns.
What you need:

Fresnel biprisms
08556.00
Prism table with holder
08254.00
Fresnel mirror
08560.00
08018.01
Lens, mounted, f = +300 mm, achromatic
08025.01
Lens holder
08012.00
Swinging arm
08256.00
08286.01
08286.02
08282.00
08284.00
08181.93
09936.00

Interference of light
P2220100
Geometrical arrangement, using the Fresnel mirror.
Tasks:
Determination of the wavelength of
light by interference
1. with Fresnel mirror,
2. with Fresnel biprism.
Optics
Interference
Newtons rings 2.2.02-00

Coherent light
Phase relationship
Path difference
Interference in thin films
Newtons ring apparatus
Principle:
In a Newtons rings apparatus,
monochromatic light interferes in
the thin film of air between the
slightly convex lens and a plane glass
plate. The wavelengths are determined from the radii of the interference rings.
What you need:

Newton rings apparatus
08550.00
Lens, mounted, f = + 50 mm
08020.01
Interference filters, set of 3
08461.00
08064.00
Mercury vapour high pressure lamp, 50 W
08144.00
Power supply 230V/50 Hz for 50 W Hg-lamp
13661.97
08137.00
Lens holder
08012.00
08286.01
08286.02
08282.00
08284.00
09937.01
Condenser holder
08015.00

Newtons rings
P2220200
Radius of the interference rings as a function of the order number for various
wavelengths.
Tasks:
Using the Newtons rings apparatus,
to measure the diameter of the rings
at different wavelengths and:
1. to determine the wavelengths for
a given radius of curvature of the
lens
2. to determine the radius of curvature at given wavelengths.
Optics
Interference
2.2.03-00 Interference at a mica plate according to Pohl

Interference of equal
inclination
Interference of thin layers
Plane parallel plate
Refraction
Reflection
Optical path difference
Principle:
Monochromatic light falls on a plane
parallel mica plate. The light rays,
reflected at the front surface as well
as at the rear surface, will interfere
to form a pattern of concentric rings.
The radii of the rings depend on the
geometry of the experimental setup, the thickness of the mica plate
and the wavelength of the light.
What you need:

Mica plate
08558.00
Colour filter, 440 nm
08411.00
08414.00
08415.00
08120.14
Spectral lamp Na, pico 9 base
08120.07
08119.00
Swinging arm
08256.00
Plate holder with tension spring
08288.00
08062.00
Stand tube
02060.00
08283.00
08284.00
08286.02
Bench clamp -PASS-
02010.00
09936.00
13662.97

Interference at a mica plate
according to Pohl
P2220300
Interference order m as a function of sin2 for Na-light.
Tasks:
The experiment will be performed
with the light of a Na-lamp and with
the light of different wavelengths of
a Hg-vapour tube.
1. The thickness of the mica plate is
determined from the radii of the
interference rings and the wavelength of the Na-lamp.
2. The different wavelengths of the
Hg-vapour tube are determined
from the radii of the interference
rings and the thickness of the
mica plate.
Optics
Interference
Fresnels zone construction / zone plate 2.2.04-00

Fresnel and Fraunhofer
diffraction
Interference
Coherence
Zone plates
Principle:
A zone plate is illuminated with parallel laser light. The focal points of
several orders of the zone plate are
projected on a ground glass screen.
What you need:

08181.93
Fresnel zone plate, after Fresnel
08577.03
Lens holder
08012.00
08018.01
08020.01
08021.01
08026.01
Object holder 50 mm x 50 mm
08041.00
Ground glass screen, 50 mm d = 50 mm
08136.01
Polarisation filter, 50 mm, d = 50 mm
08613.00
08282.00
08284.00
08286.01

Fresnels zone construction / zone plate
P2220400
Geometry of the zone plate.
Tasks:
1. The laser beam must be widened
so that the zone plate is well illuminated. It must be assured that
the laser light beam runs parallel
over several meters.
2. The focal points of several orders
of the zone plate are projected on
a ground glass screen. The focal
lengths to be determined are plotted against the reciprocal value of
their order.
3. The radii of the zone plate are calculated.
Optics
Interference
2.2.05-00 Michelson interferometer

Interference
Wavelength
Refractive index
Velocity of light
Phase
Principle:
In the Michelson arrangement interference will occur by the use of 2
mirrors. The wavelength is determined by displacing one mirror using
the micrometer screw.
What you need:

08557.00
08181.93
Swinging arm
08256.00
08018.01
Lens mounted, f = +5 mm
08017.01
Lens holder
08012.00
08286.01
1
2
08283.00
08284.00
08062.00
Barrel base -PASS-
02006.55

P2220500
Formation of circles on interference.
Tasks:
You can find more
Determination of the wavelength of

the light of the used laser.
advanced optics
in this brochure
Order No. 00117.02
(see page 121)
ADVANCED OPTICS
AND LASER PHYSICS
Optics
Interference
Coherence and width of spectral lines with Michelson interferometer 2.2.06-00

Fraunhofer and Fresnel diffraction
Interference
Spatial and time coherence
Coherence conditions
Coherence length for non
punctual light sources
Coherence time
Spectral lines (shape and half
width value)
Broadening of lines due to
Doppler effect and pressure
broadening
Magnification
Principle:
The wavelengths and the corresponding lengths of coherence of the
green spectral lines of an extreme
high pressure Hg vapour lamp are
determined by means of a Michelson
interferometer.
What you need:

Michelson Interferometer
08557.00
High pressure mercury vapour lamp CS 50 W
08144.00
Power supply for Hg-CS/50 W Lamp
13661.97
Optical profile bench, l = 100 cm
08282.00
Base for optical profile bench
08284.00
Slide mount, h = 30 mm
08286.01
Lens holder
08012.00
Object holder 50 x 50 mm
08041.00
Swingin arm
08256.00
Barrel base -PASS-
02006.55
Stand tube
02060.00
Mounted lens f = 20 mm
08018.01
Mounted lens f = 200 mm
08024.01
Iris diaphragm
08045.00
Coloured filter, green, 525 nm
08414.00
Ground-glass screen 50 x 50 mm
08136.01
Diaphragm holder, attachable
11604.09
Measuring magnifier
09831.00
Slit, adjustable up to 1 mm
11604.07
Diaphragm with 4 double slits
08523.00

Coherence and width of spectral lines
with Michelson interferometer
P2220600
Beam path in Michelsons interferometer.
Different double slit combinations

are illuminated to verify the coherence conditions of non punctual
light sources. An illuminated auxiliary adjustable slit acts as a non
punctual light source.
Tasks:
1. Determination of the wavelength
of the green Hg spectral line as
well as of its coherence length.
2. The values determined in 1. are
used to calculate the coherence
time and the half width value of
the spectral line.
3. Verification of the coherence condition for non punctual light
sources.
Optics
Interference
2.2.07-00 Refraction index of air and CO2 with Michelson interferometer

Interference
Wavelength
Phase
Refraction index
Light velocity
Principle:
A measurement cuvette set in the
beam path of a Michelson interferometer can be evacuated or filled
with CO2. The refraction indexes of
air or CO2 are determined through
the assessed modification of the
interference pattern.
What you need:

08557.00
08181.93
Glass cell, diam. 21,5 mm
08625.00
Manual vacuum pump with manometer
08745.00
1
1
08283.00
08284.00
08286.01
08286.02
Swinging arm
08256.00
Lens holder
08012.00
Lens mounted, f = +5 mm
08017.01
Compressed gas, CO2, 21 g
41772.06
Fine control valve for pressure bottles
33499.00
02040.55
Barrel base -PASS-
02006.55
08062.00
Tubing connect., Y-shape, d = 8-9 mm
47518.03
PVC tubing, d = 7 mm
03985.00

Refraction index of air and CO2
P2220700
Number N of minima changes as a function of air pressure in the measuring

cuvette.
You can find more

advanced optics
in this brochure
Order No. 00117.02
(see page 121)
ADVANCED OPTICS
AND LASER PHYSICS
Optics
Diffraction
Diffraction at a slit and Heisenbergs uncertainty principle 2.3.01-00

Diffraction
Diffraction uncertainty
Kirchhoffs diffraction formula
Measurement accuracy
Uncertainty of location
Uncertainty of momentum
Wave-particle dualism
De Broglie relationship
Principle:
The distribution of intensity in the
Fraunhofer diffraction pattern of a
slit is measured. The results are evaluated both from the wave pattern
viewpoint, by comparison with
Kirchhoffs diffraction formula, and
from the quantum mechanics standpoint to confirm Heisenbergs uncertainty principle.
What you need:

08181.93
Diaphragm with 3 single slits
08522.00
08523.00
Diaphragm with 4 multiple slits
08526.00
08040.00
08734.00
08713.00
07128.00
Universal measuring amplifier
13626.93
1
1
08281.00
08284.00
08286.01
07361.01
07361.04

Diffraction at a slit and Heisenbergs
uncertainly principle
P2230100
Intensity in the diffraction pattern of a 0.1 mm wide slit at a distance of
1140 mm. The photocurrent is plotted as a function of the position.
Tasks:
1. To measure the intensity distribution of the Fraunhofer diffraction pattern of a single slit (e. g.
0.1 mm).
The heights of the maxima and
the positions of the maxima and
minima are calculated according
to Kirchhoffs diffraction formula
and compared with the measured
values.
2. To calculate the uncertainty of

momentum from the diffraction
patterns of single slits of differing
widths and to confirm Heisenbergs uncertainty principle.
Optics
Diffraction
2.3.02-00 Diffraction of light at a slit and an edge

Intensity
Fresnel integrals
Fraunhofer diffraction
Principle:
Monochromatic light is incident on a
slit or an edge. The intensity distribution of the diffraction pattern is
determined.
What you need:

Lens holder
Slit, adjustable
Barrel base -PASSMeter Scale, l = 1000 x 27 mm
G-clamp
Multi-range meter with amplifier
08181.93
08734.00
08012.00
08026.01
08049.00
08062.00
02006.55
03001.00
02014.00
09936.00
07034.00
1
1
1
1
1
1
4
1
1
1
1
*Alternative:
Connecting cord, l = 75 cm, red
Connecting cord, l = 75 cm, blue
13625.93
07128.00
07362.01
07362.04
1
1
1
1

Diffraction of light at a slit and an edge
P2230200
Intensity distribution on diffraction at the slit, as a function of the position

along a straight line parallel to the plane of the slit, standardised on the
intensity without the slit.
Tasks:
You can find more
1. Measurement of the width of a

given slit.
advanced optics
2. Measurement of the intensity distribution of the diffraction pattern

of the slit and
in this brochure
Order No. 00117.02
3. of the edge.
(see page 121)

ADVANCED OPTICS
AND LASER PHYSICS
Optics
Diffraction
Intensity of diffractions due to pin hole diaphragms and circular obstacles 2.3.03-00
Huygens principle
Interference
diffraction
Coherence
Laser
Airy disk
Airy ring
Poissons spot
Babinets theorem
Bessel function
Resolution of optical
instruments
Principle:
Pin hole diaphragms and circular
obstacles are illuminated with laser
light. The resulting intensity distributions due to diffraction are measured
by means of a photo diode.
What you need:

08181.93
13626.93
1
1
08281.00
08284.00
08286.02
08713.00
08041.00
08062.00
Screen with diffracting elements
08577.02
08734.00
07128.00
07362.01
07362.04

Intensity of diffractions due to pin hole
diaphragms and circular obstacles
P2230300
Diffracted intensity I vs position x of the photodiode, using a diaphragm with

D1 = 0.25 mm.
Tasks:
1. The complete intensity distribution of the diffraction pattern of a
pin hole diaphragm (D1 = 0.25
mm) is determined by means of a
sliding photo diode. The diffraction peak intensities are compared
with the theoretical values. The
diameter of the pin hole diaphragm is determined from the
diffraction angles of peaks and
minima.
2. The positions and intensities of
minima and peaks of a second pin
hole diaphragm (D2 = 0.5 mm) are
determined. The diffraction peak

intensities are compared with the
theoretical values. The diameter of
the pin hole diaphragm is determined.
3. The positions of minima and peaks
of the diffraction patterns of two
complementary circular obstacles
(D*1 = 0.25 mm and D*2 = 0.5
mm) are determined. Results are
discussed in terms of Babinets
Theorem.
Optics
Diffraction
2.3.04-00 Diffraction intensity of multiple slits and grids

Huygens principle
Interference
Fraunhofer und Fresnel
diffraction
Coherence
Laser
Principle:
Multiple slits which all have the
same width and the same distance
among each other, as well as transmission grids with different grid constants, are submitted to laser light.
The corresponding diffraction patterns are measured according to
their position and intensity, by
means of a photo diode which can be
shifted.
What you need:

08181.93
13626.93
1
1
08281.00
08284.00
08286.01
08713.00
Lens holder
08012.00
08041.00
08018.01
08021.01
08734.00
08522.00
Diaphragm with 4 multiple slits
08526.00
08532.00
08534.00
Diffraction grating,10 lines/mm
08540.00
08543.00
07128.00
07362.01
07362.04

Diffraction intensity
of multiple slits and grids
P2230400
Diffraction intensity I as a function of the position x for a threefold slit,

b1 = 0.1 mm and g = 0.25 mm. Distance between threefold slit and photocell: L = 107 cm. For comparison, the intensity distribution of a single slit,
b = 0.1 mm, is entered as a dotted line.
Tasks:
1. The position of the first intensity
minimum due to a single slit is
determined, and the value is used
to calculate the width of the slit.
2. The intensity distribution of the
diffraction patterns of a threefold, fourfold and even a fivefold
slit, where the slits all have the
same widths and the same distance among each other, is to be
determined. The intensity relations

of the central peaks are to be
assessed.
3. For transmission grids with different lattice constants, the position
of the peaks of several orders of
diffraction is to be determined,
and the found value used to calculate the wavelength of the laser
light.
Optics
Diffraction
Determination of the diffraction intensity at slit and double slit systems 2.3.05-00
Huygens principle
Interference
diffraction
Coherence
Laser
Principle:
Slit and double slit systems are illuminated with laser light. The corresponding diffraction patterns are
measured by means of a photodiode
which can be shifted, as a function
of location and intensity.
What you need:

08181.93
13626.93
1
1
08281.00
08284.00
08286.01
08713.00
Lens holder
08012.00
08041.00
08018.01
08021.01
08734.00
08522.00
08523.00
07128.00
07362.01
07362.04
Diffraction intensity I as a function of location x for the single slit b1 =

0.1 mm and b2 = 0.2 mm.
The x axis of the graph for b1 = 0.1 mm is shifted upwards. The intensity of
the areas next to the central peak is represented enlarged by a factor of 10.
(Distance between slit and photodiode L = 107 cm; = 632.8 nm).

Determination of diffraction intensity
at slit and double slit systems
P2230500
You can find more

advanced optics
Tasks:
1. Determination of the intensity
distribution of the diffraction patterns due to two slits of different
widths.
The corresponding width of the
slit is determined by means of the
relative positions of intensity values of the extremes. Furthermore,
intensity relations of the peaks are
evaluated.
2. Determination of location and

intensity of the extreme values of
the diffraction patterns due to
two double slits with the same
widths, but different distances
between the slits. Widths of slits
and distances between the slits
must be determined as well as the
intensity relations of the peaks.
in this brochure
Order No. 00117.02
(see page 121)
ADVANCED OPTICS
AND LASER PHYSICS
Optics
Diffraction
2.3.06-00 Diffraction intensity through a slit and a wire Babinets theorem

Huygens principle
Interference
Fraunhofer und Fresnel
diffraction
Babinets theorem
Poissons spot
Coherence
Laser
Principle:
An aperture consisting of a single slit
and a complementary strip (wire) is
illuminated with a laser beam. The
corresponding diffraction patterns
are measured according to position
and intensity with a photocell which
can be shifted.
What you need:

Laser, He-Ne 1.0 mW, 220 V AC
08181.93
13626.93
Optical profile bench l = 150 cm
08281.00
Base f. opt. profile-bench, adjust.
08284.00
Slide mount f. opt. pr.-bench, h = 30 mm
08286.01
Slide device, horizontal
08713.00
Object holder, 5 x 5 cm
08041.00
Photoelement f. opt. base plt.
08734.00
Screen, with diffracting elements
08577.02
07128.00
Connecting cable, l = 750 mm, red
07362.01
Connecting cable, l = 750 mm, blue
07362.04

Diffraction intensity through a slit
and a wire Babinets theorem
P2230600
You can find more

advanced optics
in this brochure
Order No. 00117.02
(see page 121)
ADVANCED OPTICS
AND LASER PHYSICS
Diffraction intensity I as a function of the position x for single slit a) and

strip b). Width of the diffracting object b = 0.2 mm.
The intensities in the areas next to the central peak are represented extended by a factor of 10. (Distance between diffracting object and photocell
L = 120 cm; Wavelength of the laser light = 632.8 nm)
Tasks:
distribution of the diffraction patterns due to a slit and complementary strip (wire).
3. Babinets theorem is discussed

using the diffraction patterns of
the slit and the complimentary
strip.

relations of the diffraction pattern
peaks for the single slit.
Optics
Photometry
Photometric law of distance 2.4.02-01

Luminous flux
Quantity of light
Luminous intensity
Illuminance
Luminance
Principle:
The luminous intensity emitted by a
punctual source is determined as a
function of distance.
What you need:

Hand held measuring instrument Lux, RS 232
07137.00
Luxmeter probe
12107.01
1
1
08283.00
08284.00
08286.01
08286.02
Lamp socket E 14, on stem
06175.00
Filament lamps, 6 V/5 A
06158.00
13505.93
Universal clamp
37718.00

Photometric law of distance
P2240201
Illuminance as a function of the reciprocal values of the square of the distances.
Tasks:
1. The luminous intensity emitted by
a punctual source is determined as
a function of distance from the
source.
2. The photometric law of distance is
verified by plotting illuminance as
a function of the reciprocal value
of the square of the distance.
Optics
Photometry
2.4.02-11 Photometric law of distance with Cobra3

Luminous flux
Quantity of light
Luminous intensity
Illuminance
Luminance
Principle:
The luminous intensity emitted by a
punctual source is determined as a
function of distance.
Experimental objective:
The luminous intensity is a function
of the distance of the light sensor
from the light source. The law for
point light sources on which this is
based should be determined.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14515.61
06175.00
06158.00
13505.93
Stand tube
02060.00
Distributor
06024.00
Barrel base -PASS-
02006.55
Bench clamp -PASS-
02010.00
03001.00
Photo diode, G1
39119.01
07362.01
07362.04
39104.15
Tasks:
12004.10
07542.27
1. The luminous intensity emitted by

a punctual source is determined as
a function of distance from the
source.
07542.20
02040.55
02062.00
02407.00
02412.00
Luminous intensity as a function of the square of the reciprocal of the distance (lamp diode)
2. The photometric law of distance is

verified by plotting illuminance as
a function of the reciprocal value
of the square of the distance.

Photometric law of distance with Cobra3
P2240211
Optics
Photometry
Lamberts law 2.4.04-00

Luminous flux
Light quantity
Light intensity
Illuminance
Luminance
Principle:
Visible light impinges on a diffusely
reflecting surface. The luminance of
this surface is determined as a function of the angle of observation.
What you need:

Housing for experiment lamp
08129.01
Halogen lamp, 12 V/50 W
08129.06
Holder G 6.35 for 50/100 W halogen lamp
08129.04
08137.00
Lens holder
08012.00
08024.01
Zinc sulphide screen, 90 mm x 120 mm
08450.00
02040.55
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
Stand tube
02060.00
02030.00
02025.55
02028.55
Articulated radial holder
02053.01
Graduated disk, for demonstration
02053.02
37716.00
13505.93
Luxmeter probe
12107.01
Hand held measuring instrument Lux, RS 232
07137.00

Lamberts law
P2240400
Illuminance as a function of cos .
Tasks:
1. The luminous flux emitted reflected by a diffusely reflecting surface
is to be determined as a function
of the angle of observation.
2. Lamberts law (cos-law) is to be
verified using the graph of the
measurement values.
Optics
Photometry
2.5.01-00 Polarisation by quarterwave plates

Plane
Circularly and elliptically
polarised light
Polariser
Analyzer
Plane of polarisation
Double refraction
Optic axis
Ordinary and extraordinary
ray
Principle:
Monochromatic light falls on a mica
plate perpendicular to its optic axis.
At the appropriate plate thickness
(/4, or quarter-wave plate) there is
a 90 phase shift between the ordinary and the extraordinary ray when
the light emerges from the crystal.
The polarisation of the emergent
light is investigated at different
angles between the optic axis of the
/4 plate and the direction of polarisation of the incident light.
What you need:

08734.00
Lens holder
08012.00
08021.01
08040.00
Iris diaphragm
08045.00
08137.00
Condenser holder
08015.00
08144.00
Power supply 230V/50 Hz for 50 W Hg-lamp
13661.97
Interference filter yellow, 578 nm
08461.01
Polarisation filter on stem
08610.00
08282.00
08284.00
08286.01
08286.02
Polarisation specimen, mica
08664.00
07128.00
13626.93
07362.01
07362.04

Polarisation by quarterwave plates
P2250100
Intensity distribution of polarised light as a function of the direction of transmission of the analyser: with /4 plate at various angular settings.
Tasks:
1. To measure the intensity of planepolarised light as a function of the
position of the analyser.
3. To perform experiment 2. with two

/4 plates one behind the other.
2. To measure the light intensity

behind the analyser as a function
of the angle between the optic
axis of the /4 plate and that of
the analyser.
Optics
Polarisation
Polarimetry 2.5.02-00
Half-shade principle
Optical rotatory power
Optical activity
Saccharimetry
Specific rotation
Reaction rate
Weber-Fechner law
Principle:
The rotation of the plane of polarisation through a sugar solution measured with a half-shade penumbra
polarimeter and the reaction rate
constant for the inversion of cane
sugar determined.
What you need:

Half-shade polarimeter, 230 V AC
35906.93
08492.93
08492.01
08487.02
03071.01
Crucible tongs, l = 200 mm, stainless steel
33600.00
Beaker, 250 ml, low form, plastic
36013.01
Graduated cylinder, 100 ml, plastic
36629.01
Graduated vessel, 1 l, with handle
36640.00
Funnel, plastic, d = 100 mm
36891.00
Spoon with spatula end, l = 180 mm, PA, wide
38833.00
40485.06
Pipette, with rubber bulb, long
64821.00
D (+)-Sucrose, 100 g
30210.10
Hydrochloric acid 37 %, 1000 ml
30214.70
31246.81
D(+)-Lactose, powder 100 g
31577.10
Balance LG 311, 4 beams
44007.31

Polarimetry
P2250200
Semi-logarithmic plot of the measured values from cane sugar inversion.
Tasks:
1. To determine the specific rotation
of cane sugar (sucrose) and lactose by measuring the rotation of
various solutions of known concentration.
2. To determine the reaction rate
constant when cane sugar is
transformed into invert sugar.
Optics
Polarisation
2.5.03-00 Fresnels equations theory of reflection

Electromagnetic theory of
light
Reflection coefficient
Reflection factor
Brewsters law
Law of refraction
Polarization
Polarization level
Principle:
Plane-polarized light is reflected at a
glas surface. Both the rotation of the
plane of polarization and the intensity of the reflected light are to be
determined and compared with
Frewsnels formulae for reflection.
What you need:

08181.93
08610.00
Prism, 60 degrees, h = 36 mm, flint
08237.00
Prism table with holder
08254.00
08734.00
Protractor scale with pointer
08218.00
02053.01
Stand tube
02060.00
Tripod base -PASS-
02002.55
H-base -PASS-
02009.55
02040.55
02025.55
02027.55
07034.00
0.8
EXP.
0.6
THEOR.

0.4

0.2
''

Fresnels equations theory of reflection
P2250300
20
40
p
60
80
Measured and calculated curves for"r and r as a function of the angle of
incidence.
You can find more
Tasks:
Order No. 00117.02
1. The reflection coefficients for light

polarized perpendicular and parallel to the plane of incidence are
to be determined as a function of
the angle of incidence and poltted
graphically.
(see page 121)
2. The refractive index of the flint

glass prism is to be found.
advanced optics
in this brochure
ADVANCED OPTICS
AND LASER PHYSICS
3. The reflection coefficients are to

be calculated using Fresnels formulae and compared with the
measured curves.
4. The reflection factor for the flint

glass prism is to be calculated.
5. The rotation of the polarization
plane for plane polarized light
when reflected is to be determined as a function of the angle
of incidence and presented graphically. It is then to be compared
with values calculated using Fresnels formulae.
Optics
Polarisation
Malus law 2.5.04-00

Electric theory of light
Polarization
Polarizer
Analyzer
Brewster's law
Malus' law
Principle:
Linear polarized light passes through
a polarization filter.
Transmitted light intensity is determined as a function of the angular
position of the polarization filter.
What you need:

08181.93
08283.00
08284.00
08286.01
08610.00
08734.00
07128.00

Malus law
P2250400
Corrected photo cell current as a function of the angular position of the polarization plane of the analyzer.
You can find more

advanced optics
in this brochure
Order No. 00117.02
(see page 121)
Tasks:
1. The plane of polarization of a linear polarized laser beam is to be
determined.
2. The intensity of the light transmitted by the polarization filter is to
be determined as a function of the
angular position of the filter.
3. Malus law must be verified.
ADVANCED OPTICS
AND LASER PHYSICS
Optics
Applied Optics
2.6.01-00 Faraday effect

Electromagnetic field
interaction
Electron oscillation
Electromagnetism
Polarization
Verdets constant
Hall effect
Principle:
The angle of rotation of the polarisation-plane of plane polarized light
through a flint glass rod is found to
be a linear function of the product of
the mean flux-densitiy and the
length of the optical medium. The
factor of proportionally, called
Verdets constant, is investigated as
a function of the wavelength and the
optical medium.
What you need:

Glass rod for Faraday effect
Coil, 600 turns
Pole pieces, drilled
Housing for experiment lamp
Halogen lamp, 12 V/50 W
Holder G 6.35 for 50/100 W halogen lamp
Variable transformer 25 V~/20 V-, 12 A
Ampermeter, 1 mA...3 A DC/AC
Commutator switch
Teslameter, digital
Hall probe, axial
Lens holder
Table top on rod
Polarisation filter with vernier
Universal clamp
06496.00
06514.01
06495.00
06501.00
08129.01
08129.06
08129.04
08137.00
13531.93
07036.00
06034.03
13610.93
13610.01
08022.01
08012.00
08060.00
08041.00
08411.00
08413.00
08414.00
08415.00
08416.00
08611.00
08064.00
08282.00
08284.00
08286.01
08286.02
37718.00
07362.01
07362.04
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
2
5
1
3
3

Faraday effect
P2260100
Verdets constant as a function of the wavelength

+ measured values
--- theoretical values.
Tasks:
1. To determine the magnetic fluxdensitiy between the pole pieces
using the axial Hall probe of the
teslameter for different coil currents. The mean flux-density is
calculated by numerical integration and the ratio maximum fluxdensity over mean flux-density established.
3. To determine the angle of rotation

as a function of the mean fluxdensity using different colour filters. To calculate the corresponding Verdets constant in each case.
4. To evaluate Verdets constant as a
function of the wavelength.
2. To measure the maximum fluxdensity as a function of the coil

current and to establish the relationship between mean flux-density and coil current anticipating
that the ratio found under 1. remains constant.
Optics
Applied Optics
Kerr effect 2.6.02-00

Polarization of light
Birefraction
Optical anisotropy
Modulation of light
Electro-optical modulator
PLZT-element
Principle:
Monochromatic, vertically polarized
light impinges on a PLZT element
(lead-lanthanum-zirconium-titanium compount) which is set in its
holder at 45 to the vertical.
An electric field is applied to the
PLZT element and causes it to
become birefractive. The phase-shift
between the normal and the extraordinary light beam behind the PLZT
element is recorded as a function of
the applied voltage and it is shown
that the phase-shift is proportional
to the square of the electric field
strength respectively of the voltage
applied. From the constant of pro-
What you need:

Kerr cell, PLZT element
08641.00
High voltage supply 0...10 kV
13670.93
08181.93
08610.00
2
1
08283.00
08284.00
08286.01
08286.02
08734.00
13626.93
07128.00
07542.11
07542.27
07362.01
07362.04

Kerr effect
P2260200
You can find more

advanced optics
in this brochure
Order No. 00117.02
(see page 121)
ADVANCED OPTICS
AND LASER PHYSICS
Relative luminous intensity I0 behind the analyser as a function of the voltage U applied to the PLZT element and the phase-shift between normal
and extraordinary beam.
portionality the Kerr constant is calculated for the PLZT element.

The Kerr effect has usually been
demonstrated with nitrobenzene in
the past. Since nitrobenzene is very
toxic and needs high voltages of
some kV the PLZT element which
only needs some hundred volts represents an attractive alternative.
Tasks:
1. The phase-shift between the normal and the extra-ordinary light
beam is to be recorded for different voltages applied to the PLZTelement respectively for different
electric field strengs.The halfwave voltage U ( l2 ) is to be determined.
2. By plotting the square of the
applied voltage versus the phase
shift between normal and extraordinary beam it is to be shown that
the relation between the two
quantities is approximately linear.
From the slope of the straight line
the Kerr constant is to be calculated.
Optics
Applied Optics
2.6.03-00 Recording and reconstruction of holograms

Object beam
Reference beam
Real and virtual image
Phase holograms
Amplitude holograms
Interference
Diffraction
Coherence
Developing of film
Principle:
In contrast to normal photography a
hologram can store information about
the three-dimensionality of an object.
To capture the three-dimensionality
of an object, the film stores not only
the amplitude but also the phase of
the light rays. To achieve this, a coherent light beam (laser light) is split
into an object and a reference beam
by being passed through a beam splitter. These beams interfere in the plane
of the holographic film. The hologram
is reconstructed with the reference
beam which was also used to record
the hologram.
What you need:

Base plate in experimental case
He/Ne Laser, 5mW with holder
Power supply for laser head 5 mW
Magnetic foot for optical base plate
Holder for diaphragm/ beam plitter
XY-shifting device
Adapter ring device
Achromatic objective 20 x N.A.0.4
Pin hole 30 micron
Adjusting support 35 x 35 mm
Surface mirror 30 x 30 mm
Surface mirror,large, d = 80 mm
Beam plitter 1/1, non polarizing
Object for holography
Holographic plates, 20 pcs.*
Darkroom equipment for holography
08700.01
08701.00
08702.93
08710.00
08719.00
08713.00
08714.00
08714.01
62174.20
08743.00
08711.00
08711.01
08712.00
08741.00
08749.00
08746.00
08747.88
1
1
1
6
2
1
2
1
1
1
2
2
1
1
1
1
1
Setup for recording and reconstruction of a transmission hologram.
consisting of:
Plastic trays, 4 pcs. Laboratory gloves, medium, 100 pcs. Tray thermometer, offset, +40C Roller squeegee Clamps, 2 pcs. Film tongs, 2 pcs.
Darkroom lamp with green filter Light bulb 230 V/15 W Funnel
Narrow-necked bottles, 4 pcs.
Set of photographic chemicals
08746.88 1
Consisting of: Holographic developer Stop bath Wetting agent
Laminate; Paint
Bleaching chemicals:
Potassium dichromate, 250 g
Sulphuric acid, 95-98%, 500 ml
30102.25
30219.50
1
1
*Alternative:
Holographic sheet film
Glass plate, 120 x 120 x 2 mm
08746.01
64819.00
1
2
Tasks:
1. Capture the holographic image of
an object.
2. Perform the development and
bleaching of this phase hologram.
3. Reconstruct the transmission
hologram (reconstruction beam is
the reference beam during image
capture).

Recording and reconstruction of holograms P2260300
Optics
Applied Optics
CO2-laser 2.6.04-00
Molecular vibration
Exitation of molecular
vibration
Electric discharge
Spontaneous emission
Vibration niveau
Rotation niveau
Inversion
Induced emission
Spectrum of emission
Polarization
Brewster angle
Optical resonator
Principle:
Among molecular laser, the CO2-laser
is of greatest practical importance.
The high level of efficiency with which
laser radiation can be generated in
continuous wave (cw) and pulse operation is its most fascinating feature.
The experimental equipment set is an
open CO2-didactic laser system of
max. 8 W power output. Since it is an
open system, all components of the
system can be handled individually
and the influence of each procedure
on the output power can be studied.
One very primary and essential target
in learning is the alignment of the
CO2-laser by means of a He-Ne-laser.
What you need:

CO2-laser tube, detachable, typically 5 W
Module box for CO2-laser tube
Set of laser mirrors, ZnSe and Si
Optical bench on steel rail, l = 1,3 m
HV-power supply 5 kV/50 mA DC
Ballast resistor unit incl. 3 HV cables
Cooling water unit, portable
Rotatory vane vacuum pump, two stages
Gas filter/buffer unit
He/Ne-laser/adjusting device
Diaphragm for adjusting CO2 Laser
Right angle clamp -PASSPowermeter 30 mW/10 Watt
Support for power probe
Protection glasses, 10.6 micro-m
Cleaning set for laser
ZnSe biconvex lens, d = 24 mm, f = 150 mm
Digital Thermometer, 2 x NiCr-Ni
HV-isolated temperature probe
Control panel with support, 1 gas*
Pressure control valve 200/3 bar, CO2/He*
Laser gas in bottle, 50 l/200 bar*
08596.00
08597.00
08598.00
08599.00
08600.93
08601.00
08602.93
02751.93
08605.00
08607.93
08608.00
08064.00
02040.55
08579.93
08580.00
08581.00
08582.00
08609.00
07050.01
08584.00
08606.00
08604.01
08603.00
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
*Alternative to:
Laser gas mixing unit, 3 gases
08606.88
08610.10
08611.00
Option:
Experiment set for laser beam analysis
1. Estimation of wavelength by diffraction grating and
2. Distribution of power by diaphragm
IR conversion plate for observation of CO2-laser
infrared radiation

CO2-laser
P2260400
Laser power as a function of the angle of inclination of the brewster window

normal N.
Tasks:
1. Align the CO2-laser and optimize
its power output.
2. Check the influence of the Brewster windows position on the
power output.
3. Determine the power output as a
function of the electric power
input and gasflow.
4. Evaluate the efficiency as a function of the electric power input
and gasflow.
5. If the gas-mixing unit is supplied

the influence of the different
components of the laser gas (CO2,
He, N2) to the output efficiency of
the CO2-laser are analyzed.
6. Measurement of temperatures
differences for the laser gas
(imput / output) for study of conversion efficiency.
Optics
Applied Optics
2.6.05-11 LDA Laser Doppler Anemometry with Cobra3

Interference
Doppler effect
Scattering of light by small
particles (Mie scattering)
High- and low-pass filters
Sampling theorem
Spectral power density
Turbulence
Principle:
Small particles in a current pass
through the LDA measuring volume
and scatter the light whose frequency is shifted by the Doppler effect
due to the particle movement.
The frequency change of the scattered light is detected and converted
into a particle or flow velocity.
What you need:

Optical base plate with rubberfeet
He/Ne Laser, 5 mW with holder
Iris diaphragm
Si-Photodetector with Amplifier
Control Unit for Si-Photodetector
Prism table with holder for optical base plate
Lens holder for optical base plate
Screen, white, 150 x 150 mm
XY-shifting device
Pin hole 30 micron
LDA-Accessory-Set
Right angle clamp -PASSUniversal clamp
Support base -PASSAspirator bottle, clear glass, 1000 ml
Silicone tubing, d = 7 mm
Pinchcock, width 10 mm
Glass tube, AR-glass, straight, d = 8 mm, l = 80 mm, 10 pcs.
Rubber stopper, d = 32/26 mm, 1 hole
Spatulas, double bladed, l = 150 mm, wide
Cobra3 BASIC-UNIT
08700.00
08701.00
08702.93
08711.00
08711.01
08710.00
08719.00
08021.01
08020.01
08018.01
08045.00
08741.00
08735.00
08735.99
07542.27
07542.11
08725.00
08723.00
09826.00
08714.00
08743.00
08740.00
02027.55
02040.55
37718.00
02005.55
34175.00
39296.00
43631.10
36701.65
39258.01
39255.01
09936.00
33460.00
36012.00
12150.00
1
1
1
2
2
8
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
2
2
2
1
2
4
3
1
2
2
1
1
1
1
Measurement of the signal spectrum with a signal peak
Tasks:
1. Measurement of the light-frequency change of individual light
beams which are reflected by
moving particles.
2. Determination of the flow velocities.
Power supply 12V/2A

Software Cobra3 Fourier Analysis
12151.99
14602.00
14514.61
08713.00
1
1
1
1

LDA Laser Doppler Anemometry
with Cobra3
P2260511
Optics
Applied Optics
Helium Neon Laser 2.6.07-01

Spontaneous and stimulated
light emission
Inversion
Collision of second type
Gas discharge tube
Resonator cavity
resonator modes
Birefringence
Brewster angle
Littrow prism
Fabry Perot Etalon
Principle:
The difference between spontaneous
and stimulated emission of light is
demonstrated. The beam propagation
within the resonator cavity of a HeNe laser and its divergence are determined, its stability criterion is
checked and the relative output
power of the laser is measured as a
function of the tubes position inside
the resonator and of the tube current.
What you need:

HeNe laser, basic set
08656.93
Photoelement, silicon
08734.00
07128.00
09826.00
Danger sign Laser
06542.00
Barrel base -PASS-
02006.55
03010.00
09936.00
Protection glasses HeNe laser
08581.10
08582.00

Helium Neon Laser
P2260701
Option:
Experimentation set Helium-Neon laser, advanced set
08656.02
Helium Neon Laser, advanced set
P2260705
You can find more

advanced optics
Relative output power as a function of mirror spacing.
The following items can be realized

with advanced set 08656.02.
By means of a birefringent tuner and
a Littrow prism different wavelengths can be selected and quantitatively determined if a monochromator is available.
Finally you can demonstrate the existence of longitudinal modes and
the gain profile of the He-Ne laser
provided an analysing Fabry Perot
system is at your disposal.
3. Measure the integral relative output power as a function of the

laser tubes position within the
hemispherical resonator.
4. Measure the beam diameter within the hemispherical resonator
right and left of the laser tube.
5. Determine the divergence of the
laser beam.
6. Measure the integral relative output power as a function of the
tube current.
Tasks:
The He-Ne laser can be tuned using

a BFT or a LTP. Longitudinal modes
can be observed by use of a Fabry
Perot Etalon of low finesse. Remark:
These points can only be covered
quantitatively if a monochromator
and an analysing Fabry Perot system
are available.
in this brochure
Order No. 00117.02
(see page 121)
ADVANCED OPTICS
AND LASER PHYSICS
1. Set up the He-Ne laser. Adjust the

resonator mirrors by use of the
pilot laser. (left mirror: VIS, HR,
plane ; right mirror: VIS, HR, R =
700 mm)
2. Check on the stability condition of
a hemispherical resonator.
Optics
Applied Optics
2.6.08-00 Optical pumping

Induced emission
Mean lifetime of a
metastable state
Relaxation
Inversion
Diode laser
Principle:
The visible light of a semiconductor
diode laser is used to excite the
neodymium atoms within a Nd-YAG
(Neodymium-Yttrium Aluminium
Garnet) rod. The power output of the
semiconductor diode laser is first
recorded as a function of the injection current. The fluorescent spectrum of the Nd-YAG rod is then determined and the maon absorption
lines of the Nd-atoms are verified.
Conclusively, the mean life-time of
the 4F3/2-level of the Nd-atoms is
measured in appoximation.
What you need:

Basic set optical pumping
08590.93
Sensor for measurement of beam power
08595.00
07128.00
11459.95
07542.11
0,6
Protection glasses for Nd-YAG laser
08581.20
0,5
Prel
1,0
0,9
0,8
0,7
804,4 nm
0,4
808,4 nm
0,3
Optional:
Optical base plate in exp. case
812,9 nm
0,2
817,3 nm
0,1
08700.01
1
10

Optical pumping
P2260800
20
30
40
50
60
T
C
Relative fluorescent power of the Nd-YAG rod as a function of the diode

temperature (wavelength) for I = 450 mA.
Tasks:
1. To determine the power output of
the semiconductor diode laser as a
function of the injection current.
2. To trace the fluorescent spectrum
of the Nd-YAG rod pumped by the
diode laser and to verify the main
absorption lines of neodymium.
3. To measure the mean life-time of
the 4F3/2-level of the Nd-atoms.
4. For further applications see experiment 2.6.09 Nd-YAG laser.
Optics
Applied Optics
Nd-YAG laser 2.6.09-00

Optical pumping
Induced emission
Inversion
Relaxation
Optical resonator
Resonator modes
Polarization
Frequency doubling
Principle:
The rate equation model for an optically pumped four-level laser system
is determined. As lasing medium, a
Nd-YAG (Neodymium-Yttrium Aluminium Garnet) rod has been selected which is pumped by means of a
semiconductor diode laser.
The IR-power output of the Nd-YAG
laser is measured as a function of the
optical power input and the slope efficiency as well as the threshold
power are determined.
What you need:

PNd-YAG
Basic set optical pumping
08590.93
Sensor for measurement of beam power
08595.00
Nd-YAG laser cavity mirror/holder
08591.01
Laser cavity mirror frequency doubling
08591.02
Frequency doubling crystal in holder
08593.00
Filter plate, short pass type
08594.00
07128.00
11459.95
07542.11
Protection glasses for Nd-YAG laser
08581.20
08582.00
Optional:
mW
25
20
From graphic:
Threshold power = 57 mW
15
From graphic:
Slope efficiency: 30%
10
Optical base plate in exp. case
08700.01

Nd-YAG laser
P2260900
Pump power
mW
Tasks:
1. Set up the Nd-YAG laser and optimize its power output.
2. The IR-power output of the NdYAG laser is to be measured as a
function of the pump power. The
slope efficiency and the threshold
power are to be determined.
3. Verify the quadratic relationship
betweenthe power of the fundamental wave, with = 1064 nm,
and the beam power of the second
harmonic with = 532 nm.
50
100
150
Nd-YAG laser power output as a function of the pump power = 808.4 nm.
Finally, a KTP-crystal is inserted into

the laser cavity and frequency doubling is demonstrated. The quadratic
relationship between the power of
the fundamental wave and the beam
power for the second harmonic is
then evident.
Optics
Applied Optics
2.6.10-00 Fibre optics

Total reflection
Diode laser
Gaussian beam
Monomode and multimode
fibre
Numerical aperture
modes
Transit time
Threshold energy
Slope efficiency
Velocity of light
Principle:
The beam of a laser diode is treated
in a way that it can be coupled into
a monomode fibre. The problems
related to coupling the beam into
the fibre are evaluated and verified.
In consequence a low frequency signal is transmitted through the fibre.
The numerical aperture of the fibre is
recorded. The transit time of light
What you need:

Experimentation Set Fibre Optics
08662.93
07542.11
Oscilloscope 100 MHz, 2-channel
11451.99

Fibre optics
P2261000
Relative output power at the fibre end versus angle readout.
through the fibre is measured and

the velocity of light within the fibre
is determined. Finally the measurement of the relative output power of
the diodelaser as a function of the
supply current leads to the characteristics of the diodelaser such as
threshold energy and slope
efficiency.
Tasks:
1. Couple the laser beam into the
fibre and adjust the setting-up in
a way that a maximum of output
power is achieved at the exit of

the fibre.
2. Demonstrate the transmission of a
LF signal through the fibre.
3. Measure the numerical aperture
of the fibre.
4. Measure the transit time of light
through the fibre and determine
the velocity of light within the
fibre.
5. Determine the relative output
power of the diodelaser as a function of the supply current.
Optics
Applied Optics
Fourier optics 2f Arrangement 2.6.11-00

Fourier transform
Lenses
Index of refraction
Huygens principle
Principle:
The electric field distribution of light
in a specific plane (object plane) is
Fourier transformed into the 2 f configuration.
What you need:

08700.00
08701.00
08702.93
08711.00
08711.01
08710.00
08719.00
08022.01
08021.01
08723.00
09826.00
08543.00
08577.02
62174.20
08713.00
XY-shifting device
08714.00
Adapter ring device
08714.01
Pin hole 30 micron
08743.00
09937.01

Fourier optics 2 f Arrangement
P2261100
Experimental set-up for the fundamental principles of Fourier optic (2f setup). *only required for the 5 mW laser!
Tasks:
Investigation of the Fourier transform by a convex lens for different
diffraction objects in a 2 f set-up.
Optics
Applied Optics
2.6.12-00 Fourier optics 4f Arrangement Filtering and reconstruction

Fourier transform
Lenses
Index of refraction
Huygens principle
Debye-Sears-effect
Principle:
The electric field distribution of light
in a specific plane (object plane) is
Fourier transformed into the 4f
configuration by 2 lenses and optically filtered with appropriate diaphragms.
What you need:

Holder for diaphragm/beam plitter
Slide -Emperor MaximilianScreen with arrow slit
Diaphragms, d = 1, 2, 3 and 5 mm
XY-shifting device
Adapter ring device
Pin hole 30 micron
Table with stem
Bosshead
Universal clamp
08700.00
08701.00
08702.93
08711.00
08711.01
08710.00
08719.00
08021.01
08723.00
09826.00
82140.00
08133.01
08532.00
08543.00
09815.00
08577.02
08713.00
08714.00
62174.20
08714.01
08743.00
09937.01
13920.99
03504.00
09824.00
02031.00
02043.00
37718.00
1
1
1
2
2
9
2
3
3
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
1
1
1
Principle of the set-up for coherent optical filtration.
Tasks:
1. Optical filtration of diffraction
objects in 4f set-up.
2. Reconstruction of a filtered image.

Fourier optics 4 f Arrangement
Filtering and reconstruction
P2261200
Optics
Handbooks
Advanced Optics and Laser Physics
For free
ADVANCED OPTICS
AND LASER PHYSICS
Advanced Optics
and Laser Physics
00117.02
Laser Physics I Experiments with

coherent light
01179.02
Laser Physics II
Holography
23 described Experiments
Please ask for a complete equipment
list Ref. No. 22614
list Ref. No. 22702
list Ref. No. 22703
list Ref. No. 22704
Laser Physics
LEP
Helium Neon Laser
LEP
CO2-laser
LEP
Nd-YAG-laser
1 Diffraction of light
LP 1.1
(12166)
Diffraction of light through a slit and at
an edge.
LP 1.2
(12167)
Diffraction through a slit and
Heisenbergs uncertainty principle.
LP 1.3
(12168)
Diffraction of light through a double slit
or by a grid.
LP 1.4
(12169)
Diffraction of light through a slit and
stripes, Babinets theorem
LH 1
Fresnel zone plate
(12900)
LH 2
White light hologram
(12901)
LH 3
White light hologram
with expansion system
(12902)
LH 4
Transmission hologram
(12903)
LH 5
Transmission hologram
with expansion system
(12904)
2 Interference of light
LP 2.1
Fresnel mirror and biprism
LP 2.2
LP 2.3
Newtons rings
LH 6
Transfer hologram from a
master hologram.
(12905)
(12171)
LH 7
Double exposure procedure
(12906)
(12172)
LH 8
Time-averaging procedure I
(with tuning fork).
12907)
LH 9
Time-averaging procedure II
(with loudspeaker).
(12908)
LI 1
(13066)
LI 2
(13067)
Michelson interferometer high resolution
LI 3
(13068)
Mach - Zehnder interferometer
LI 4
(13069)
Sagnac interferometer
LI 5
(13070)
Doppler-Effect with Michelson interferom.
LI 6
(13071)
Magnetostriction with Michelson
interferometer
LI 7
(13072)
Thermal expansion of solids
LI 8
(13073)
Refraction index of CO2-gas with
LI 9
(13074)
Refraction index of air
LI 10
(13075)
Refraction index of air with
Mach-Zehnder interferometer
LI 11
(13076)
Refraction index of of CO2-gas with
Mach-Zehnder interferometer
LI 12
(13077)
Fabry - Perot interferometer determination of the wavelength of laserlight
LI 13
(13078)
Fabry - Perot interferometer
optical resonator modes
LI 14
(22611)
Fourier optics 2 f arrangement
LI 15
(22612)
Fourier optics 4 f arrangement, filtering
and reconstruction
LI 16
(13079)
Optical determination of the velocity of
ultrasound in liquids phasemodulation
of laserlight by ultrasonic waves
LI 17
(13080)
LI 18
(13081)
Twyman-Green interferometer
(P2260700)
(P2260400)
(P2260900)
Advanced Optics
LP 1.3
(P1216800)
Diffraction of light through
a double slit or by a grid
LP 1.4
(P1216900)
Diffraction of light through
a slit and stripes, Babinets theorem
LP 2.2
(P1217100)
LP 2.3
(P1217200)
Newtons rings
LP 2.3
(P1217400)
Polarisation through /4 plates
LP 3.4
(P1217600)
Kerr effect
LP 3.5
(P1217700)
Faraday effect
LP 4.3
(P1218000)
Determination of the index of refraction
of CO2 with Michelsons interferometer
LH 3
(P1290200)
White light hologram with expansion
system
LH 5
(P1290400)
Transmission hologram with expansion
system
LH 6
(P1290500)
Transfer hologram from a
master hologram
LH 10
(P1290900)
Real time procedure I
(bending of a plate)
LI 3
(P1306700)
High Resolution
LI 5
(P1307000)
Doppler effect with the Michelson
interferometer
LI 6
(P1307100)
Magnetostriction with the Michelson
interferometer
LI 10
(P1307500)
Determination of the refraction index of
air with the Mach-Zehnder interferometer
(12170)
3 Polarisation of light
LP 3.1
(12173)
Fresnels law, theory of reflection
LP 3.2
(12174)
Polarisation through /4 plates
LP 3.3
(12175)
Half shadow polarimeter, rotation of polarisation through an optically active medium
LP 3.3
(12176)
Kerr effect
LP 3.5
(12177)
Faraday effect
LH 10
Real time procedure I
(bending of a plate).
01400.02
12909)
LH 11
(12910)
Real time procedure II (oscillating plate).
4 Refraction of light
LP 4.1
(12178)
Index of refraction n of a flint glass prism
LP 4.2
(12179)
of air with Michelsons interferometer
LP 4.3
(12180)
of CO2 with Michelsons interferometer
5 Law of radiation
LP 5.1
Lamberts law of radiation
(12181)
LI 12
(P1307700)
Fabry-Perot interferometer Determination of the laser lights wavelength
LI 13
(P1307800)
Fabry-Perot interferometer
optical resonator modes
Laser Physics III

Interferometry
01401.02
LI 15
(P2261200)
Fourier optics optical filtration
4f Arrangement
LI 17
(P1308000)
Optics
Handbooks

Geometrical optics and theory of colours on the magnetic board
The demonstration system presents the following advantages:
simple handling and minimum preparation time through components with magnets
PHYSICS
Georg Schollmeyer
clear and dust proof storage of all components in the device shaped
wooden tray
detailed description of experiments with figures.
60 experiments covering light propagation (7), mirror (16), diffraction (10), lenses (13),
colours (6), eye (3), optical instruments (5)
01151.02
Magnet Board Optics
clear length of beams through 50 W halogen lamp with magnet and large model objects
Physics Demonstration Experiments Magnet Board Optics No. 01151.02 60 described Experiments
1 Propagation of light
OT 1.1
(11000)
Rectilinear propagation of light
OT 1.2
(11001)
Shadow formation by a point light source
OT 1.3
(11002)
Umbra and penumbra with two point
light sources
OT 1.4
(11003)
Umbra and penumbra with an extensive
light source
OT 1.5
(11004)
Length of shadows
OT 1.6
(11005)
Solar and lunar eclipses with a point
light source
OT 1.7
(11006)
Solar and lunar eclipses with an
extensive light source
2 Mirrors
OT 2.1
(11007)
Reflection of light
OT 2.2
(11008)
The law of reflection
OT 2.3
(11009)
Formation of an image point by a plane
mirror
OT 2.4
(11010)
Image formation by a plane mirror
OT 2.5
(11011)
Applications of reflection by plane mirrors
OT 2.6
(11012)
Reflection of light by a concave mirror
OT 2.7
(11013)
Properties of a concave mirror
OT 2.8
(11014)
Real images with a concave mirror
OT 2.9
(11015)
Law of imagery and magnification of a
concave mirror
OT 2.10
(11016)
Virtual images with a concave mirror
OT 2.11
(11017)
Aberrations with a concave mirror
OT 2.12
(11018)
Reflection of light by a convex mirror
OT 2.13
(11019)
Properties of a convex mirror
OT 2.14
(11020)
Image formation by a convex mirror
OT 2.15
(11021)
convex mirror
OT 2.16
(11022)
Reflection of light by a parabolic mirror
3 Refraction
OT 3.1
(11023)
Refraction at the air-glass boundary
OT 3.2
(11024)
Refraction at the air-water boundary
OT 3.3
(11025)
The law of refraction
OT 3.4
(11026)
Total reflection at the glass-air boundary
OT 3.5
(11027)
Total reflection at the water-air
boundary
OT 3.6
(11028)
Passage of light through a planoparallel
glass plate
OT 3.7
(11029)
Refraction by a prism
OT 3.8
(11030)
Light path through a reversing prism
OT 3.9
(11031)
Light path through a deflection prism
OT 3.10
(11032)
Light transmission by total reflection
OT 4.8
(11040)
Image formation by a divergent lens
OT 4.9
(11041)
divergent lens
OT 4.10
(11042)
Lens combination consisting of
two convergent lenses
OT 4.11
(11043)
Lens combination consisting of a
convergent and a divergent lens
OT 4.12
(11044)
Spherical aberration
OT 4.13
(11045)
Chromatic aberration
5 Colours
OT 5.1
(11046)
Colour dispersion with a prism
OT 5.2
(11047)
Non-dispersivity of spectral colours
OT 5.3
(11048)
Reunification of spectral colours
OT 5.4
(11049)
Complementary colours
OT 5.5
Additive colour mixing
OT 5.6
Subtractive colour mixing
(11051)
6 The human eye

OT 6.1
(11052)
Structure and function of the human eye
OT 6.2
(11053)
Short-sightedness and its correction
OT 6.3
(11054)
Long-sightedness and its correction
7 Optical equipment
OT 7.1
(11055)
The magnifying glass
OT 7.1
(11056)
The camera
OT 7.3
(11057)
The astronomical telescope
OT 7.4
(11058)
The Newtonian reflecting telescope
OT 7.5
(11059)
Herschels reflecting telescope
4 Lenses
OT 4.1
(11033)
Refraction of light by a convergent lens
OT 4.2
(11034)
Properties of a convergent lens
OT 4.3
(11035)
Real images with a convergent lens
OT 4.4
(11036)
convergent lens
OT 4.5
(11037)
Virtual images with a convergent lens
OT 4.6
(11038)
Refraction of light at a divergent lens
OT 4.7
(11039)
Properties of a divergent lens
(11050)
Light guide
Thermodynamics
3
Thermodynamics
Contents
3.1
3.1.01-00
3.2
Thermal Expansion
3.4
Phase Transitions
3.4.01-00
Vapour pressure of water at high temperature
3.4.02-00
Vapour pressure of water below 100C /

3.4.03-00
3.4.04-00
3.2.01-01
3.2.01-15
Equation of state of ideal gases with Cobra3
3.2.02-01
3.2.02-11
3.2.03-00
3.5.01-01/15
Stefan-Boltzmanns law of radiation
3.2.04-00
Thermal equation of state and critical point
3.5.02-00
Thermal and electrical conductivity of metals
3.2.05-00
Adiabatic coefficient of gases Flammersfeld oscillator
3.2.06.00
3.6.01-00
3.6.02-00
Heat pump
Stirling engine
3.3
3.5
3.6
3.603-00
3.3.01-11
3.6.04-01/15
3.3.02-00
3.3.01-01
3.7
Solar ray Collector
Handbooks
Glas jacket system
Thermodynamics
Thermal Expansion
Thermal expansion in solids and liquids 3.1.01-00

Linear expansion
Volume expansion of liquids
Thermal capacity
Lattice potential
Equilibrium spacing
Grneisen equation
Principle:
The volume expansion of liquids and
the linear expansion of various materials is determined as a function of
temperature.
What you need:

Dilatometer with clock gauge for practical class experiments 04233.00
Tube for dilatometer, copper
04231.05
Tube for dilatometer, aluminium
04231.06
Tube for dilatometer, quarz glass
04231.07
08492.93
08492.01
08487.02
38056.00
39282.00
Syringe 1 ml, Luer, pack of 10
02593.03
Cannula, LUER, d = 0.60 mm, 20 pcs.
02599.04
Measuring tube, l = 300 mm, IGJ 19/26
03024.00
33930.00
Flat bottom flasks, DURAN, 100 ml, IGJ 19/26
35811.01
36002.00
Ethyl acetate, 250 ml
30075.25
Glycerol, 250 ml
30084.25
Olive oil, pure, 100 ml
30177.10
Precision Balance, Sartorius CP323P
48800.93

P2310100
Relationship between length l and temperature , for a) aluminium, b) brass,

c) copper, d) steel, e) duran glass, f) quartz glass (lo = 600 mm)
Tasks:
1. To determine the volume expansion of ethyl acetate (C4H8O2),
methylated spirit, olive oil, glycerol
and water as a function of temperature, using the pycnometer.
2. To determine the linear expansion
of brass, iron, copper, aluminium,
duran glass and quartz glass as a

function of temperature using a
dilatometer.
3. To investigate the relationship between change in length and overall length in the case of aluminium.
Thermodynamics
3.2.01-01 Equation of state of ideal gases

Pressure and temperature
Volume
Coefficient of thermal
expansion
tension
Coefficient of cubic
compressibility
General equation of state for
ideal gases
Universal gas constant
Gay-Lussacs law
Charles (Amontons) law
Principle:
The state of a gas is determined by
its temperature, its pressure and the
amount of substance. For the limiting case of an ideal gas these state
variables are linked by the general
equation of state, from which special
correlations can be derived for specific changes of state.
What you need:

Gas law apparatus
04362.00
08492.93
08492.01
08487.02
Weather monitor, 6 lines LCD
87997.10
38056.00
Mercury tray
02085.00
Support base -PASS-
02005.55
02034.00
Right angle clamp
37697.00
Universal clamp
37718.00
43631.15
1
6
40996.01
39282.00
Mercury, filtered, 1000 g
31776.70
31246.81

P2320101
Correlation between pressure p and volume V for a constant quantity of air
(n = 0.9536 mmol) during an isothermic change of state (T = 298.15 K).
Tasks:
For a constant amount of gas (air)
investigate the correlation of
1. Volume and pressure at constant
temperature (Boyle and Mariottes
law)
2. Volume and temperature at constant pressure (Gay-Lussacs law)
From the relationships obtained calculate the universal gas constant as

well as the coefficient of thermal expansion, the coefficient of thermal
tension, and the coefficient of cubic
compressibility.
3. Pressue and temperature at constant volume (Charles (Amontons

law))
Thermodynamics
Equation of state of ideal gases with Cobra3 3.2.01-15

Thermal tension coefficient
General equation of state
for ideal gases
Amontons law
Principle:
The state of a gas is determined by
temperature, pressure and amount of
substance. For the limiting case of
ideal gases, these state variables are
linked via the general equation of
state. For a change of state under
isochoric conditions this equation
becomes Amontons law.
In this experiment it is investigated
whether Amontons law is valid for a
constant amount of gas (air).
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
Measuring module pressure
12103.00
Cobra3 measuring module converter
12150.04
Temperature sensor, semiconductor type
12120.00
Software Cobra3 Gas Laws
14516.61
Glass jacket
02615.00
Gas syringes, without cock, 100 ml
02614.00
Heating apparatus
32246.93
Power regulator
32288.93
H-base -PASS-
02009.55
02031.00
Right angle clamp
37697.00
Universal clamp
37718.00
37716.00
Magnet rod, l = 200 mm, d = 10 mm
06311.00
Tasks:
46299.02
36004.00
For a constant amount of gas (air)

investigate the correlation of
Funnel, glass, d = 50 mm
34457.00
Hose connector, reducing, d = 3-5/6-10 mm
47517.01
39298.00
39296.00
40996.01
Dependence of the pressure on the temperature under isochoric conditions.
1. Volume and pressure at constant

temperature (Boyle and Mariottes
law)
2. Volume and temperature at constant pressure (Gay-Lussacs law)
From the relationships obtained calculate the universal gas constant as

well as the coefficient of thermal expansion, the coefficient of thermal
tension, and the coefficient of cubic
compressibility.
3. Pressue and temperature at constant volume (Charles (Amontons

law))

with Cobra3
P2320115
Thermodynamics
3.2.02-01 Heat capacity of gases

Equation of state for ideal
gases
1st law of thermodynamics
Degree of freedom
Mole volumes
Isobars
Isotherms
Isochors and adiabatic
changes of slate
Principle:
Heat is added to a gas in a glass vessel by an electric heater which is
switched on briefly. The temperature
increase results in a pressure
increase, which is measured with a
manometer. Under isobaric conditions a temperature increase results
in a volume dilatation, which can be
read from a gas syringe. The molar
heat capacities CV and Cp are calculated from the pressure or volume
change.
What you need:

Precision manometer
03091.00
Hand held measuring instrument Pressure, RS 232
07136.00
13600.93
07128.00
Mariotte flask, 10 l
02629.00
02614.00
36705.00
Three-way cock
36732.00
Rubber stopper, d = 32/2 6mm, 3 holes
39258.14
Rubber stopper, d = 59.5/50.5 mm, 1 hole
39268.01
39282.00
Nickel electrode with socket, d = 3
45231.00
Nickel electrode
45218.00
Chrome-nickel wire, d = 0.1 mm, l = 100 m
06109.00
Scissors, stainless, l = 140 mm, round
64625.00
Push button switch, circuit closing
06039.00
Connection box
06030.23
Pressure change p as a function of the heat-up time t. U = 4.59 V,

I = 0.43 A
Carbon resistor 1 k, 1 W, G1
39104.19
Tasks:
Capacitor 2000 nF/ 250 V, G2
39105.29
07361.01
07361.02
Determine the molar heat capacities

of air at constant volume CV and at
constant pressure Cp.
07362.01
07361.04
Tripod base -PASS-
02002.55
37694.00
Universal clamp
37718.00
Right angle clamp
37697.00

P2320201
Thermodynamics
Heat capacity of gases with Cobra3 3.2.02-11

Equation of state for ideal
gases
1st law of thermodynamics
Degree of freedom
Mole volumes
Isobars
Isotherms
changes of slate
Principle:
Heat is added to a gas in a glass vessel by an electric heater which is
switched on briefly. The temperature
increase results in a pressure
increase, which is measured with a
manometer. Under isobaric conditions a temperature increase results
in a volume dilatation, which can be
read from a gas syringe. The molar
heat capacities CV and Cp are calculated from the pressure or volume
change.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14504.61
Precision manometer
03091.00
07136.00
14602.00
Cobra3 current probe 6 A
12126.00
Mariotte flask, 10 l
02629.00
02614.00
36705.00
Three-way cock
36732.00
Rubber stopper, d = 32/26 mm, 3 holes
39258.14
Rubber stopper, d = 59.5/50.5 mm, 1 hole
39268.01
39282.00
Nickel electrode with socket, d = 3
45231.00
Nickel electrode
45218.00
Chrome-nickel wire, d = 0.1 mm, l = 100 m
06109.00
Scissors, stainless, l = 140 mm, round
64625.00
Tasks:
Push button switch, circuit closing
06039.00
07361.01
07362.01
Determine the molar heat capacities

of air at constant volume CV and at
constant pressure Cp.
07361.04
Tripod base -PASS-
02002.55
37694.00
Universal clamp
37718.00
Right angle clamp
37697.00
Volume change V as a function of the heat-up time t. U = 4.59 V,

I = 0.43 A.

P2320211
Thermodynamics
3.2.03-00 Maxwellian velocity distribution

Kinetic theory of gases
Temperature
Gas
Molecules
Model kinetic energy
Average velocity
Velocity distribution
Principle:
By means of the model apparatus for
kinetic theory of gases the motion of
gas molecules is simulated and the
velocity is determined by registration
of the throw distance of the glass
balls. This velocity distribution is
compared to the theoretical MAXWELL-BOLTZMANN equation.
What you need:

Kinetic gas theory apparatus
09060.00
Receiver with recording chamber
09061.00
13505.93
21809.93
03071.01
Tripod base -PASS-
02002.55
07362.01
07362.04
Test tube, AR-glass, d = 16 mm
37656.10
Test tube rack for 12 tubes, wood
37686.10

P2320300
Experimental and theoretical velocity distribution in the model experiment.
Tasks:
1. Measure the velocity distribution
of the model gas.
2. Compare the result to theoretical
behaviour as described by the
MAXWELL-BOLTZMANN distribution.
3. Discuss the results.
Thermodynamics
Thermal equation of state and critical point 3.2.04-00

Ideal gas
Real gas
Equation of state
Van der WAALS equation
BOYLE temperature
Critical point
Interaction potential
Molecule radius
Principle:
A substance which is gaseous under
normal conditions is enclosed in a
variable volume and the variation of
pressure with the volume is recorded
at different temperatures. The critical point is determined graphically
from a plot of the isotherms.
What you need:

Critical point apparatus
04364.10
08492.93
08492.01
08487.02
Gasket for GL18, hole d = 8 mm, 10 pcs
41240.03
Vacuum pump, rotary sliding-vane, one-stage
02750.93
Adapter
02657.00
Safety bottle, 500 ml, 2 x Gl18/8, 1 x 25/12
34170.88
Tripod base -PASS-
02002.55
02032.00
38056.00
Universal clamp
37718.00
Right angle clamp
37697.00
Rubber tubing, d = 8 mm
39283.00
Rubber tubing, vacuum, i.d. = 8 mm
39288.00
Rubber tubing/vacuum, d = 6 mm
39286.00
43631.15
40996.01
Hose clip for 12-20 diameter tube
40995.00
Mercury tray
02085.00
Compressed gas, ethane, 14 g
41772.09

Thermal equation of state and critical point P2320400
p-V-isotherms of ethane.
Tasks:
1. Measure a number of p-V-isotherms of ethane.
2. Determine the critical point and
the critical quantities of ethane.
3. Calculate the constants of the
Van der WAALS equation, the
BOYLE-temperature, the radius of
the molecules and the parameters
of the interaction potential.
Thermodynamics
3.2.05-00 Adiabatic coefficient of gases Flammersfeld oscillator

Equation of adiabatic change
of slate
Polytropic equation
Rchardts experiment
Thermal capacity of gases
Principle:
A mass oscillates on a volume of gas
in a precision glass tube. The oscillation is maintained by leading escaping gas back into the system. The
adiabatic coefficient of various gases
is determined from the periodic time
of the oscillation.
What you need:

Gas oscillator, Flammersfeld
04368.00
36632.00
Aspirator bottle, clear glass, 1000 ml
34175.00
Air control valve
37003.00
11207.30
11076.99
Micrometer
03012.00
Glass tube, AR-glass, right-angled, l = 85 + 60 mm, 10 pcs. 36701.52
39255.01
39258.01
39282.00
Sliding weight balance, 101 g
44012.01
Aquarium pump, 230 V AC
64565.93
Aneroid barometer
03097.00
03076.01
Tripod base -PASS-
02002.55
02026.55
02040.55
Universal clamp
37718.00
33481.00
Pressure-reducing valves, nitrogen
33483.00
Steel cylinders, carbon dioxide, 10 l
41761.00
Steel cylinders, nitrogen, 10 l
41763.00
Ten measurements, each of about n = 300 oscillations, gave for the

adiabatic coefficients
Argon
= 1.62 0.09
Nitrogen
= 1.39 0.07
Carbon dioxide
= 1.28 0.08
Air
= 1.38 0.08
Tasks:
Determine the adiabatic coefficient
of air nitrogen and carbon dioxide
(and also of argon, if available) from
the periodic time of the oscillation T
of the mass m on the volume V of
gas

Adiabatic coefficient of gases
Flammersfeld oscillator
P2320500
Thermodynamics
3.2.06.00

Real gas
Intrinsic energy
Gay-Lussac theory
Throttling
Van der Waals equation
Van der Waals force
Inverse Joule-Thomson effect
Inversion temperature
Principle:
A stream of gas is fed to a throttling
point, where the gas (CO2 or N2) undergoes adiabatic expansion. The differences in temperature established
between the two sides of the throttle point are measured at various
pressures and the Joule-Thomson
coefficients of the gases in question
are calculated.
What you need:

Joule-Thomson apparatus
04361.00
Temperature meter digital, 4-2
13617.93
Temperature probe, Pt100
11759.01
33481.00
33483.00
Wrench for steel cylinders
40322.00
41763.00
Gas-cylinder Trolley for 2 Cylinder
41790.20
Hose clip for 12-20 diameter tube
40995.00
39288.00

P2320600
Temperature differences measured at various ram pressures.
Tasks:
1. Determination of the Joule-Thomson coefficient of CO2.
2. Determination of the Joule-Thomson coefficient of N2.
Thermodynamics
3.3.01-01 Heat capacity of metals

Mixture temperature
Boiling point
Dulong Petits law
Lattice vibration
Internal energy
Debye temperature
Principle:
Heated specimens are placed in a
calorimeter filled with water at low
temperature. The heat capacity of
the specimen is determined from the
rise in the temperature of the water.
What you need:

Calorimeter, 500 ml
04401.00
Metal bodies, set of 3
04406.00
Steel pot, 1 l
05933.00
Butane burner Labogaz 206
32178.00
Butane cartridge C 206 without valve
47535.00
Aneroid barometer
03097.00
Precision mercury thermometers, -10...+ 50C
38033.00
03071.01
Portable Balance, OHAUS JR300
48891.00
02090.00
Wire triangle (clay triangle), l = 60 mm
33278.00
Tripod, ring d = 140 mm, h = 240 mm
33302.00
36013.00
36015.00
Glass beads, 850 pieces, d = 6 mm
36756.25

P2330101
Temperature as a function of time in the method of mixtures experiment

a) steel, b) brass, c) aluminium.
Tasks:
1. To determine the heat capacity of
the calorimeter by filling it with
hot water and determining the
rise in temperature.
2. To determine the specific heat

capacity of aluminium, iron and
brass.
3. To verify Dulong Petits law with
the results of these experiments.
Thermodynamics
Heat capacity of metals with Cobra3 3.3.01-11

Mixture temperature
Boiling point
Dulong Petits law
Lattice vibration
Internal energy
Debye temperature
Principle:
Heated specimens are placed in a
calorimeter filled with water at low
temperature. The heat capacity of
the specimen is determined from the
rise in the temperature of the water.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
Software Cobra3 Temperature
14503.61
Measuring module temperature NiCr-Ni, 330C
12104.00
Immersion probe NiCr-Ni,-50/1000C
13615.03
H-base -PASS-
02009.55
02037.00
Bosshead
02043.00
Universal clamp
37718.00
Ring with Bosshead, i.d. = 10 cm
37701.01
Wire nets, 160 x 160 mm
33287.01
Metal bodies, set of 3
04406.00
32178.00
47535.00
03071.01
Tasks:
Portable Balance, OHAUS JR300
48891.00
02090.00
Calorimeter vessel, 500 ml
04401.10
1. To determine the specific heat

capacity of aluminium, iron and
brass.
36014.00
36015.00
Stirring rod
04404.10
Pipette, with rubber bulb
64701.00
Beads, 200 g
36937.20
Course of temperature in the calorimeter.

For 180 g Iron (100 C) and 200 g water (room-temperature).
2. To verify Dulong Petits law with

the results of these experiments.

Paper tissues

P2330111
Thermodynamics
3.3.02-00 Mechanical equivalent of heat

Mechanical work
Thermal energy
Thermal capacity
First law of thermodynamics
Specific thermal capacity
Principle:
In this experiment, a metal test body
is rotated and heated by the friction
due to a tensed band of synthetic
material. The mechanical equivalent
of heat for problem 1 is determined
from the defined mechanical work
and from the thermal energy
increase deduced from the increase
of temperature. Assuming the equivalence of mechanical work and heat,
the specific thermal capacity of aluminum and brass is determined.
Tasks:
1. Determination of the mechanical
equivalent of heat.
2. Determination of the specific
thermal capacity of aluminum and
brass.
What you need:

Mechanical equivalence of heat apparatus
04440.00
Friction cylinder CuZn, 1.28 kg
04441.02
Friction cylinder Al, 0.39 kg
04441.03
02025.55
02040.55
03060.03
03060.04
03071.01
Bench clamp -PASS-
02010.00
37716.00
Commercial weight, 1000 g
44096.70
Commercial weight, 5000 g
44096.81
28
X X X
A2
X X
X X
X X
X X
X
27
T
26
A1
25
24

P2330200
T2
T
C
X X X X X X X
X
120
240
T1
360
480
600
Temperature-time diagram for a measurement example.
720
t
s
Thermodynamics
Phase Transitions
Vapour pressure of water at high temperature 3.4.01-00

Boiling point
Heat of vaporisation
Clausius-Clapeyron equation
Vant Hoff law
Carnot cycle
Principle:
Water is heated in a closed pressure
chamber; as much water vaporises as
to make the pressure in the chamber
correspond to the vapour pressure at
the temperature at any time. The
heat of vaporisation is determined at
various temperatures from the measurement of vapour pressure as a
function of temperature.
Tasks:
1. To measure the vapour pressure of
water as a function of temperature.
2. To calculate the heat of vaporisation at various temperatures from
the values measured.
3. To determine boiling point at normal pressure by extrapolation.
What you need:

High pressure vapour unit
02622.10
Heat conductive paste, 50 g
03747.00
1
1
Heating apparatus
32246.93
Pipette, with rubber bulb, long
64821.00
Tripod base -PASS-
02002.55
Bosshead
02043.00
02031.00
Laboratory thermometer, -10...+250C
38065.00

Vapour pressure of water at high
temperature
P2340100
Natural logarithm of vapour pressure p as a function of the reciprocal of the

temperature (1/T): Tb = boiling point at normal pressure.
Thermodynamics
Phase Transitions
3.4.02-00 Vapour pressure of water below 100C Molar heat of vaporization

Pressure
Temperature
Volume
Vaporization
Vapour pressure
Clausius-Clapeyron equation
Principle:
The vapour pressure of water in the
range of 40C to 85C is investigated. It is shown that the ClausiusClapeyron equation describes the relation between temperature and
pressure in an adequate manner. An
average value for the heat of vaporization of water is determined.
What you need:

Manometer -1.0...0.6 bar
03105.00
Thermometer, -10...+110 C
38005.02
Round flask, 100 ml, 3 necks, GL25, 2 x GL18
35677.15
Glass stopcocks, 1 way, right-angled
36705.01
Vacuum pump, rotary sliding-vane, one-stage
02750.93
Magnetic stirrer, Heating, Temperature-connection, 10 l
35731.93
46299.02
Glass tube 200 mm ext. d = 8 mm
64807.00
Gasket for GL 18, 8 mm hole, 10 pcs
41242.03
39288.00
39285.00
Support base -PASS-
02005.55
02027.55
Support rod with hole, stainless steel, l = 50 cm, M10 thread 02022.20
37716.00
02040.55
36014.00
36015.00
31246.81

Vapour pressure of water below 100C
P2340200
Semilogarithmic representation of vapour pressure p as a function of 1/T.
Tasks:
1. About 250 ml of de-mineralized
water are allowed to boil for
about 10 minutes to eliminate all
traces of dissolved gas. The water
is then cooled down to room temperature.
2. The 3-neck round flask is filled
about three-quarters full with
gas-free water and heated. At 35C

the space above the water within the
round flask is evacuated. Further
heating causes an increase
in pressure p and temperature t of
water within the round flask. p and t
are read in steps of 5 C up to a maximum of t = 85C.
Thermodynamics
Phase Transitions
Boiling point elevation 3.4.03-00

Raoults law
Henrys law
Ebullioscopic constants
Chemical potential
Gibbs-Helmholtz equation
Concentration ratio
Degree of dissociation
Principle:
The boiling point of a solution is
always higher than that of the pure
solvent. The dependence of the temperature difference (elevated boiling
point) on the concentration of the
solute can be determined using a
suitable apparatus.
What you need:

Appartus for elevation of boiling point
Heating mantle for roundbottom flask, 250 ml
Clamp for heating mantle
Power regulator
Precision Balance, Sartorius LE 623P
Weighing dishes, square shape, 84 x 84 x 24 mm, 25 pcs.
Protective sleeves for temperature probe, 2 pcs.
Right angle clamp
Universal clamp
Flask, round, 1 neck, 250 ml, GL25/14
Gasket for GL 18, 8 mm hole, 10 pcs
Mortar with pestle, 150 ml, porcelain
Spoon with spatula end, l = 150 mm, steel, micro
Pellet press for calorimeter
Rubber caps, 10 pcs
Beads, 200 g
Urea, 250 g
Hydroquinone, 250 g
Glycerol, 250 ml
36820.00
49550.93
49557.01
32288.93
48852.93
45019.25
13617.93
11759.01
11762.05
37694.00
37697.00
37718.00
35812.15
36004.00
41242.03
39296.00
32604.00
43631.15
33393.00
33931.00
04403.04
34459.00
36590.00
39275.03
36937.20
30155.50
30086.25
30089.25
30084.25
31246.81
1
1
1
1
1
1
1
1
1
1
3
3
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
Example of a measurement: boiling point increase as function of concentration of table salt in an aqueous solution.
Tasks:
1. Measure the increase in boiling
point of water as a function of the
concentration of table salt, urea
and hydroquinone.
2. Investigate the relationship
between the increase in boiling
point and the number of particles.
3. Determine the molar mass of the
solute from the relationship
between the increase in boiling
point and the concentration.

P2340300
Thermodynamics
Phase Transitions
3.4.04-00 Freezing point depression

Raoults law
Cryoscopic constants
Chemical potential
Gibbs-Helmholtz equation
Concentration ratio
Vant Hoff factor
Cryoscopy
Principle:
The freezing point of a solution is
lower than that of the pure solvent.
The depression of the freezing point
can be determined experimentally
using a suitable apparatus (cryoscopy). If the cryoscopic constants of
the solvent are known, the molecular
mass of the dissolved substances can
be determined.
What you need:

Apparatus for freezing point depression
36821.00
Gaskets for connecting caps, GL 25
41243.03
13617.93
11759.01
Protective sleeves for temperature probe, 2 pcs.
11762.05
Pellet press for calorimeter
04403.04
Magnetic stirrer mini, plastic (ABS)
47334.93
Right angle clamp
37697.00
Universal clamp
37718.00
36017.00
36581.00
Safety pipettor Flip
36592.00
37695.00
33931.00
46299.01
Precision Balance, Sartorius TE 153S
48832.93
03071.01
Mortar with pestle, 70 ml, porcelain
32603.00
Spoon with spatula end, l = 150 mm, steel, micro
33393.00
Spoon with spatula end, l = 150 mm, steel, wide
33398.00
Funnel, plastic, d = 50 mm
36890.00
Weighing dishes, square shape, 84 x 84 x 24 mm, 25 pcs.
45019.25
36590.00
Rubber caps, 10 pcs
39275.03
40485.06
30155.50
Hydroquinone, 250 g
30089.25
Denatured alcohol (Spirit forburning), 1000 ml
31150.70

P2340400
Cooling curve of water/table salt (NaCI) mixture.
Tasks:
1. Determine the size of freezing
point depression after dissolving a
strong electrolyte (NaCI) in water.
By comparing the experimental
value with the theoretical one
predicted for this concentration,
determine the number of ions into
which the electrolyte dissociates.
2. Determine the apparent molar
mass of a non-electrolyte (hydroquinone) from the value of freezing point depression.
Thermodynamics
3.5.01-01/15

Black body radiation
Thermoelectric e. m. f.
Temperature dependence of
resistances
Principle:
According of Stefan-Boltzmanns
law, the energy emitted by a black
body per unit area and unit time is
proportional to the power four of
the absolute temperature of the
body. Stefan-Boltzmanns law is also
valid for a so-called grey body
whose surface shows a wavelengthindependent absorption-coefficient
of less than one. In the experiment,
the grey body is represented by the
filament of an incandescent lamp
whose energy emission is investigated as a function of the temperature.
What you need:

Experiment P2350101 with amplifier
08283.00
08284.00
08286.01
13626.93
Thermopile, Moll type
08479.00
Shielding tube for thermopile
08479.01
Variable transformer with rectifier 15 V~/12 V- , 5 A
13530.93
06175.00
06158.00
Connection box
06030.23
Resistor 100 2%, 1W, G1
06057.10
07128.00
07361.04
07361.01
Barrel base -PASS-
02006.55
Tasks:
03001.00
1. To measure the resistance of the

filament of the incandescent lamp
at room temperature and to ascertain the filaments resistance R0
at zero degrees centrigrade.
Thermoelectric e. m. f. of thermopile as a function of the filaments absolute

temperature.
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14504.61

P23501 01/15
2. To measure the energy flux density

of the lamp at different heating
voltages. The corresponding heating currents read off for each
heating voltage and the corresponding filament resistance calculated. Anticipating a temperature-dependency of the second
order of the filament-resistance,
the temperature can be calculated
from the measured resistances.
Thermodynamics
3.5.02-00 Thermal and electrical conductivity of metals

Electrical conductivity
Wiedmann-Franz law
Lorenz number
Diffusion
Temperature gradient
Heat transport
Specific heat
Four-point measurement
Principle:
The thermal conductivity of copper
and aluminium is determined in a
constant temperature gradient from
the calorimetrically measured heat
flow.
The electrical conductivity of copper
and aluminium is determined, and
the Wiedmann-Franz law is tested.
Tasks:
1. Determine the heat capacity of
the calorimeter in a mixture
experiment as a preliminary test.
Measure the calefaction of water
at a temperature of 0 C in a calorimeter due to the action of the
ambient temperature as a function of time.
2. To begin with, establish a constant
temperature gradient in a metal
rod with the use of two heat reservoirs (boiling water and ice
water) After removing the pieces
of ice, measure the calefaction of
the cold water as a function of
time and determine the thermal
conductivity of the metal rod.
3. Determine the electrical conductivity of copper and aluminium by
recording a current-voltage characteristic line.
What you need:

Calorimeter vessel, 500 ml
Calorimeter vessel with heat conductivity connection
Heat conductivity rod, Cu
Heat conductivity rod, Al
Magnetic stirrer mini, plastic (ABS)
Gauze bag
Rheostats, 10 , 5.7 A
Immersion heater, 300 W, 220-250 VDC/AC
Temperature surface probe Pt 100
Tripod base -PASSBench clamp -PASSSupport rod -PASS-, square, l = 630 mm
Universal clamp
Right angle clamp -PASSSupporting block 105 x 105 x 57 mm
04401.10
04518.10
04518.11
04518.12
47334.93
03747.00
04408.00
06110.02
05947.93
13617.93
11759.01
11759.02
03071.01
02002.55
02010.00
02027.55
02028.55
37718.00
02040.55
02073.00
36014.00
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
4
6
1
1
4. Test of the Wiedmann-Franz law.
Diagram: Heat of surroundings over

time.
For the electrical conductivity you need:

Multi-tap transformer with rectifier 14 VAC/12 VDC, 5 A
13533.93
07128.00
13626.93
07361.01
07361.04
1
2
1
4
4

Thermal and electrical conductivity of metals P2350200
Thermodynamics
Solar ray Collector 3.6.01-00

Absorption
Heat radiation
Greenhouse effect
Convection
Conduction of heat
Collector equations
Efficiency
Energy ceiling
Principle:
The solar ray collector is illuminated
with a halogen lamp of known light
intensity. The heat energy absorbed
by the collector can be calculated
from the volume flow and the difference in the water temperatures at
the inlet and outlet of the absorber,
if the inlet temperature stays almost
constant by releasing energy to a
reservoir. The efficiency of the collector is determined from this. The
measurement is made with various
collector arrangements and at various absorber temperatures.
What you need:
2.5
15
5.0
29
20
11.0
64
20
12.5
73
50
8.0
47
50
8.0
47
50
6.0
35
50
3.0
17
+*
1.2
2.1
06755.00
2.2
Stand for solar collector
06757.00
3.1
Immersion heater, 1000 W, 220-250 V
04020.93
3.2
Halogen lamp 1000 W
08125.93
3.3
3.4
38056.00
Laboratory thermometer -10...+110 C
38060.00
Circulating pump w. flowmeter
06754.01
13505.93
Heat exchanger
Hot/cold air blower, 1700 W
04030.93
Tripod base -PASS-
02002.55
02025.55
02040.55
Universal clamp
37718.00
36010.00
36272.00
Safety gas tubing, DVGW, l = 1000 mm
39281.10
Cold
air
Water Temperatures and Collector Efficiency under Various

Experimental Conditions, m = 100 cm3/min, qi = 1 kW/m2, A = 0 12 m2.
09936.00
Tasks:
03071.01
07362.01
07362.04
To determine the efficiency of the

solar ray collector under various experimental conditions.
* This series of measurements without rear insulation

Solar ray Collector
P2360100
a e

%
1.1
e
Light
06753.00
No.
Glass
plate
Solar collector
1. Absorption of energy from the environment (20C) without illumination by sun or halogen lamp,
water temperature at the absorber
inlet e 5C.
2. Illumination with halogen lamp.

Water temperature qe 20C.
2.1 Complete collector
2.2 Collector without glass plate
3. Illumination with halogen lamp.
Water temperature qe 50C.
3.1 Complete collector
1.1 Absorber with insulation and

glass plate (complete collector)
3.2 Complete collector, cold jet of

air impinges
1.2 Absorber alone

(energy ceiling)
3.4 Collector without glass plate,

cold jet of air impinges.
3.3 Collector without glass plate
Laboratory Experiments, Physics 143
Thermodynamics
3.6.02-00 Heat pump

Refrigerator
Compressor
Restrictor valve
Cycle
Vaporization
Condensation
Vapour pressure
Vaporisation enthalpy
Principle:
Pressures and temperatures in the
circulation of the heat electrical
compression heat pump are measured as a function of time when it is
operated as a water-water heat
pump.
The energy taken up and released is
calculated from the heating and
cooling of the two water baths.
When it is operated as an air-water
heat pump, the coefficient of performance at different vaporiser temperatures is determined.
What you need:

C
Heat pump, compressor principle
04370.88
38056.00
Laboratory thermometer -10...+110 C
38060.00
03747.00
04030.93
03071.01
Tripod base -PASS-
02002.55
02025.55
37716.00
36010.00
40485.05
60
50
c0
1
40
30
20
V0
10
2
Option:
Work and power meter
ci
13715.93
10
20
t
30
Vi min
-10

Heat pump
P2360200
Temperatures at the inlet and outlet of the vaporiser Vi (), Vo () and
condenser Ci (), Co () as a function of the operating time; continuous
curves: temperature in water reservoirs.
Tasks:
1. Water heat pump:
To measure pressure and temperature in the circuit and in the water
reservoirs on the condenser side
and the vaporiser side alternately.
To calculate energy taken up and
released, also the volume concentration in the circuit and the volumetric efficiency of the compressor.
2. Air-water heat pump:
To measure vaporiser temperature
and water bath temperature on
the condenser side under different

operating conditions on the vaporiser side,
2.1 with stream of cold air
2.2 with stream of hot air
2.3 without blower.
If a power meter is available, the
electric power consumed by the
compressor can be determined with
it and the coefficient of performance
calculated.
Thermodynamics
Heat insulation / Heat conduction 3.6.03-00

Heat transition
Heat transfer
Heat conductivity
Thermal radiation
Hothouse effect
Thermal capacity
Temperature amplitude
attenuation
Principle:
A model house with replaceable side
walls is used for determining the
heat transition coefficients (k values) of various walls and windows
and for establishing the heat conductivities of different materials. For
this purpose the temperatures on the
inside and outside of the walls are
measured at a constant interior and
outer air temperature (in the steady
state).
With a multilayer wall structure the
temperature difference over a layer
is proportional to the particular ther-
What you need:

High insulation house
04507.93
Thermal regulation for high insulation house
04506.93
Partitions, plastic foam, 5 off
44536.02
Ceramic lamp socket E27 with reflector, switch, safety plug 06751.01
Filament lamp with reflector, 230 V/120 W
06759.93
Hand held instrument 2 x NiCr-Ni, RS 232
07140.00
Thermocouple NiCr-Ni, max. 500C, simple
13615.02
Tripod base -PASS-
02002.55
03071.01
02040.55
02025.55

P2360300
Heat transition resistance 1/k as a function of the wall thickness d.
mal transmission resistance. The

thermal capacity of the wall material affects the wall temperatures during heating up and temporary exposure to solar radiation.
Tasks:
1. Measurement and interpretation
of water temperatures during the
heating up and during temporary
external illumination of the walls.
2. Determination of the heat conductivities of wood and Styropor.
3. Determination of the k values of
ordinary glass and insulating glass
windows and of wooden walls of
different thicknesses, and of walls
with wood, Styropor or cavity
layers.
Thermodynamics
3.6.04-01/15
Stirling engine
First and second law

of thermodynamics
Reversible cycles
Isochoric and isothermal
changes
Gas laws
Efficiency
Stirling engine
Conversion of heat
Thermal pump
Principle:
The Stirling engine is submitted to a
load by means of an adjustable
torque meter, or by a coupled generator. Rotation frequency and temperature changes of the Stirling
engine are observed. Effective
mechanical energy and power, as
well as effective electrical power, are
assessed as a function of rotation
frequency. The amount of energy
converted to work per cycle can be
What you need:

Experiment P2360401 with oscilloscope
Stirling motor, transparent
Motor/Generator unit
Torque meter
Chimney for Stirling engine
Meter for Stirling engine, pVnT
Sensor unit pVn for Stirling engine
Syringe 20 ml, Luer, 10 pcs
Thermocouple NiCr-Ni, sheathed
Cylinder, PP, 50 ml
Denatured alcohol (Spirit forburning), 1000 ml
Cobra3 BASIC-UNIT
Power supply 12V/2A
Optional accessories for solar motor work
Accessories f. solar motor work
Support base -PASSExtension coupling, hinged
Support rod, stainl. steel, l = 500 mm
Optional accessories for heat pump work
Power supply
04372.00
04372.01
04372.02
04372.04
04371.97
04371.00
02591.03
06116.02
07128.00
07361.01
07361.04
11459.95
07542.11
13615.01
36628.01
31150.70
07542.27
12150.00
12151.99
14602.00
14504.61
1
1
1
1
1
1
1
1
2
2
3
1
2
2
1
1
1
1
1
1
1
1
2
2
1
2
1
1
1
1
determined with the assistance of

the pV diagram. The efficiency of the
Stirling engine can be estimated.
Tasks:
04372.03
02005.55
02045.00
02032.00
1
1
1
1
13505.93

Stirling engine
P23604 01/15
Pressure as a function of Volume for the Stirling process.
1. Determination of the burners

thermal efficiency
2. Calibration of the sensor unit
3. Calculation of the total energy
produced by the engine through
determination of the cycle area on
the oscilloscope screen, using
transparent paper and coordinate
paper.
4. Assessment of the mechanical

work per revolution, and calculation of the mechanical power output as a function of the rotation
frequency, with the assistance of
the torque meter.
5. Assessment of the electric power
output as a function of the rotation frequency.
6. Efficiency assessment.
Thermodynamics
Handbooks
Glass jacket system
HANDBOOK
CHEMISTRY
F. Lindenblatt / W. Jung
Glass jacket equipment system

This system consists of a glass jacket, special inserts and accessories. It was mainly
developed for experiments with gases and can be used at school for teaching physics,
chemistry and biology.
Demonstrative and transparent
Versatile and easily assembled
Water bath for accurate measurements
Glass jacket system
01196.12
Fields of application:
Working out the laws of gases
Determination of molar masses
Determination of combustion enthalpies.
Glass jacket system No. 01196.12 17 described Experiments

GL 1
Gay-Lussacs law
(12229)
GL 2
Amontons law
(12230)
GL 3
The Boyle-Mariotte law
(12231)
GL 4
(12232)
The gas laws of Boyle-Marriotte,
Gay-Lussac and Amontons
GL 5
(12233)
Determination of molar masses by
means of vapour density method
GL 14
(12242)
Determination of the heating value
(fuel value) of liquids in the vertical
calorimeter
GL 15
(12243)
Determination of the fuel value of
heating oil and diesel fuel and the
calorific value of olive oil
GL 16
(12244)
Chromatographic separation techniques: gas chromatography
GL 17
Distillation with steam
(12245)
GL6
(12234)
The law of integral volumes
GL 7
(12235)
Gay-Lussacs law of gaseous
combustion
GL 8
Avogadros law
(12236)
GL 9
(12237)
The chemical formula
for methane, ethane and propane
GL 10
(12238)
Determination of the heat of
formation of water
GL 11
(12239)
Determination of the heat of
formation of CO2 and CO and Hesss
law
GL 12
(12240)
Determination of heating value (fuel
value) of solid and gaseous fuels in
a horizontal calorimeter
GL 13
(12241)
Determination of the calorific value
of some foods
Amontons law (GL 2)

Thermodynamics
Handbooks
PHYSICS
Regina Butt
Magnetic Board Heat
The demonstration board with support stand finds application in all fields of physics. Experimentation on the board has the following advantages in the range of thermodynamics:
Quantity of liquids and convection currents in liquids can easily be seen in glass vessels
placed in front of the single-color background
Observations are supported by use of colored marking arrows and points
Description of the experiments and explanatory sketches and tables can be made directly
on the board
Individual positioning and simple movement of the holders
Secure positioning through strong magnets
01154.02
Special holders and equipment allow a secure, simple and clear method of experimentation on
the demonstration board.
The distance of the experimental equipment to the board are correlative and optimised for the
specified application.
Demonstration Experiments Physics Magnetic Board Heat No. 01154.02 15 described Experiments
1 Thermal expansion
1.1
(12913)
Volume expansion of water
1.2
(12914)
Preparing a thermometer scale
1.3
(12915)
Linear expansion of solid bodies
1.4
(12916)
Volume expansion of gases
at constant pressure
1.5
(12917)
Pressure elevation on heating gases
at constant volume
2 Heat transport
2.1
(12918)
Heat flux in liquids and gases
2.2
(12919)
Heat conduction in solid bodies
2.5
(12922)
Utilisation of radiated energy with a
solar collector
2.6
(12923)
Utilisation of radiated energy with a
solar cell
3 Refraction
3.1
Gay-Lussacs law
(12924)
3.1
Charles law
(12925)
3.3
(12926)
3.4
(12927)
Molar volume and universal gas
constant Determination of the
relative molar mass
2.3
(12920)
Heat conduction in water
2.4
(12921)
Absorption of thermal radiation
Volume expansion of gases at constant pressure (1.4)
Linear expansion of solid bodies (1.3)

Electricity
4
Electricity
Contents
Stationary Currents
4.3.04-00
4.3.05-00
Magnetic field outside a straight conductor
4.3.06-00
Wheatstone Bridge
4.3.07-11
Ferromagnetic hysteresis with PC interface system
4.1.03-00
Internal resistance and matching in voltage source
4.3.08-00
Magnetostriction with the Michelson interferometer
4.1.04-01/15
Temperature dependence of different resistors and diodes
4.1.06-01/15
Current balance / Force acting on a current-carrying conductor
4.4.01-00
Transformer
4.1.07-00
4.4.02-01/15
Magnetic induction
4.1.08-00
Peltier heat pump
4.4.03-01/11
Inductance of solenoids
4.1.09-01
4.4.04-01/11
Coil in the AC circuit
4.1.09-15
Characteristic curves of semiconductors with FG-Module
4.4.05-01/15
Capacitor in the AC circuit
4.1.11-00
Characteristic and efficiency of PEM fuel cell and PEM electrolyser
4.4.06-01/11
RLC Circuit
4.1.12-00
Faradays law
4.4.07-00
Rectifier circuits
4.1.13-15
Second order conductors. Electrolysis with FG-Module
4.4.08-00
RC Filters
Electric Field
4.4.09-01/15
High-pass and low-pass filters
Electrical fields and potentials in the plate capacitor
4.4.10-00
4.4.11-00
Resistance, phase shift and power in AC circuits
4.2.02-15
Switch-on behaviour of a capacitor and an inductivity

with FG-Module
4.4.12-11
Induction impulse
4.2.03-00
Capacitance of metal spheres and of a spherical capacitor
4.5.02-00
4.2.04-01
4.5.04-00
4.2.04-15
4.5.05-00
4.2.05-00
Coulomb potential and Coulomb field of metal spheres
4.5.06-00
Diffraction and polarization of microwaves
4.2.06-00
4.5.08-00
Radiation field of a horn antenna / Microwaves
Magnetic Field
4.5.09-00
4.1
4.1.01-01
4.1.01-15
4.1.02-00
4.2
4.2.01-00
4.2.02-01
4.3
4.3.01-00
4.3.02-01/15
Magnetic field of single coils / Biot-Savarts law
4.3.03-01/15
Magnetic field of paired coils in Helmholtz arrangement
4.4
4.5
4.6
Electrodynamics
Electromagnetic Oscilations and Waves
Handbooks
Demonstration Experiments Physics
Electricity/Electronics on the Magnetic Board 1 + 2
Electricity
Stationary currents
Measurement of small resistance 4.1.01-01

Ohms law
Resistivity
Contact resistance
Conductivity
Four-wire method of
measurement
Principle:
The resistances of various DC conductors are determined by recording
the current/voltage characteristic.
The resistivity of metal rods and the
contact resistance of connecting
cords are calculated.
What you need:

Heat conductivity rod, Cu
04518.11
Heat conductivity rod, Al
04518.12
13626.93
07128.00
13505.93
Connection box
06030.23
07359.02
07360.01
07360.04
07361.01
07361.04
07362.02
07362.04
07365.02

P2410101
Current/voltage characteristics of a copper rod and an aluminium rod.
Tasks:
1. To plot the current/voltage characteristics of metal rods (copper
and aluminium) and to calculate
their resistivity.
2. To determine the resistance of
various connecting cords by plotting their current/voltage characteristics and calculating the contact resistances.
Electricity
Stationary currents
4.1.01-15 Ohms Law with FG-Module

Ohms law
Resistivity
Contact resistance
Conductivity
Power and Work
Principle:
The electrical resistance of pure metals increases with increasing temperature. The correlation between
voltage and current is to be measured using temperature-in- and dependent resistors. Determine the
work and power of an incandescent
bulb.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
12111.00
Connection box
06030.23
39104.63
39104.64
39104.13
Lamp socket E 10, G1
17049.00
Filament lamps, 12 V/0.1 A
07505.03
07361.01
07361.04
14525.61
Current, Power and Work of an incandescent bulb.

P2410115
You can find more

experiments in Handbook
Physics Experiments
Tasks:
1. To plot the current/voltage characteristics of Ohms resistors and
of pure metals and to calculate
their resistivity.
2. To determine the resistance of
various connecting cords by plotting their current/characteristics
and calculating the contact resistances.
3. To determine the work and power
of an incandescent bulb as a function of the applied voltage.
with Cobra3
Order No. 01310.02
Electricity
Stationary currents
Wheatstone Bridge 4.1.02-00

Kirchhoffs laws
Conductor
Circuit
Voltage
Resistance
Parallel connection
Series connection
Principle:
The Wheatstone bridge circuit is
used to determine unknown resistances. The total resistance of resistors connected in parallel and in
series is measured.
What you need:

Resistance board, metal
06108.00
Simple slide wire measuring bridge
07182.00
Connection box
06030.23
39104.01
39104.63
39104.10
39104.13
Carbon resistor G1, 680 , 1 W
39104.17
Carbon resistor 1 k, 1W, G1
39104.19
Carbon resistor 4.7 k, 1W, G1
39104.27
39104.30
39104.32
Carbon resistor G1, 82 k, 1 W
39104.40
39104.41
Power supply 5 V-/1 A, +/- 15 V
13502.93
07128.00
07361.01
07361.02
07361.04

Wheatstone Bridge
P2410200
Resistance of a conductor wire as a function of its radius r.
Tasks:
1. Determination of unknown resistances.
Determination of the total resistance
3. of resistors in parallel.
4. Determination of the resistance of
a wire as a function of its crosssection.
2. of resistors in series,
Electricity
Stationary currents
4.1.03-00 Internal resistance and matching in voltage source

Voltage source
Electromotive force (e.m.f.)
Terminal voltage
No-load operation
Short circuit
Ohms law
Kirchhoffs laws
Power matching
Principle:
Both the terminal voltage of a voltage source and the current depend
on the load, i. e. on the external resistance. The terminal voltage is
measured as a function of the current and from it the internal resistance and no-load voltage of the
voltage source are determined and
the power graph plotted.
What you need:

Battery box
06030.21
07496.10
Flat cell battery, 4.5 V
07496.01
11076.99
06110.02
06114.02
07128.00
07264.00
07361.01
07361.04

Internal resistance and matching
in voltage source
P2410300
Power diagram of a voltage source.
Tasks:
1. To measure the terminal voltage
Ut of a number of voltage source
as a function of the current, varying the external resistance Re, and
to calculate the no-load voltage
U0 and the internal resistance Ri.
1.1
Slimline bat-
1.2
1.2.1
Power supply
Alternating
tery
voltage output
1.2.2
output
Direct voltage
2. To measure directly the no-load

voltage of the slimline battery
(with no external resistance) and
its internal resistance (by power
matching, Ri = Re).
3. To determine the power diagram
from the relationship between
terminal voltage and current, as
illustrated by the slimline battery.
Electricity
Stationary currents
Temperature dependence of different resistors and diodes
4.1.04-01/15

Carbon film resistor
Metallic film resistor
PTC
NTC
Z diode
Avalanche effect
Zener effect
Charge carrier generation
Free path
Mathies rule
Principle:
The temperature dependence of an
electrical parameter (e.g. resistance,
conducting-state voltage, blocking
voltage) of different components is
determined. To do this, the immersion probe set is immersed in a water
bath and the resistance is measured
at regular temperature intervals.
Set-up of experiment P2410401 with multimeter
What you need:

Immersion probes for determining ct
07163.00
08492.93
08492.01
08487.02
07128.00
Power supply 0-12 V DC/6 V, 12 V AC
13505.93
39104.27
Connection box
06030.23
07361.04
07362.01
07362.04
Cobra3 BASIC-UNIT
12150.00
14525.61
12111.00
Power supply 12V/2A
12151.99
14602.00

Temperature dependence of different
resistors and diodes
P24104 01/15
Diagram of resistances.
Tasks:
1. Measurement of the temperature
dependence of the resistance of
different electrical components.
dependence of the conducting
state voltage of semiconducting
diodes.
dependence of the voltage in the
Zener and the avalanche effects.
Electricity
4.1.06-01/15
Stationary currents
Current balance / Force acting on a current-carrying conductor

Uniform magnetic field
Magnetic induction (formerly
magnetic-flux densitiy)
Lorentz force
Moving charges
Current
Principle:
The force acting on a current-carrying conductor loop in a uniform
magnetic field (Lorentz force) is
measured with a balance.
Conductor loops of various sizes are

suspended in turn from the balance,
and the Lorentz force is determined
as a function of the current and
magnetic induction. The uniform
magnetic field is generated by an
electromagnet. The magnetic induction can be varied with the coil current.
What you need:

Experiment P2410601 with amperemeter
Ammeter 1/5 A DC
Right angle clamp -PASSBalance LGN 310, on rod
Pole pieces, rectangular, 1 pair
Wire Loop, l = 12,5 mm, n = 1
Wire Loop, l = 25 mm, n = 1
Wire loop, l = 50 mm, n = 2
Wire Loop, l = 50 mm, n = 1
Base for iron cores
Coil, 900 turns
Metal strip with plugs
Distributor
On/Off switch
Bosshead
Cobra3 BASIC-UNIT
Newton Sensor
Power supply 12V/2A
07038.00
02002.55
02028.55
02040.55
11081.01
11081.02
11081.05
11081.06
11081.07
11081.08
06501.00
06508.00
06512.01
06410.00
06024.00
06031.10
06034.01
13500.93
07359.01
07360.01
07360.04
07361.01
07361.04
07363.01
07363.04
02001.00
02043.00
02034.00
12150.00
12110.00
12110.01
12126.00
14525.61
12151.99
14602.00
2
2
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
2
2
3
1
1
1
1
2
1
1
1
1
2
1
1
1

Current balance / Force acting on a currentcarrying conductor
P24106 01/15
156 Laboratory Experiments, Physics
Lorentz force F as a function of the current IL in the conductor loop.
Tasks:
1. The direction of the force is to be
determined as a function of the
current and the direction of the
magnetic field.
2. The force F is to be measured, as
a function of the current IL in the
conductor loop, with a constant
magnetic induction B and for
conductor loops of various sizes.
The magnetic induction is to be
calculated.
3. The force F is to be measured, as
a function of the coil current IM,
for a conductor loop. In the range
being considered, the magnetic
induction B is, with sufficient accuray, proportional to the coil current IM.
Electricity
Stationary currents
Semiconductor thermogenerator 4.1.07-00

Seebeck effect
(thermoelectric effect)
Thermoelectric e.m.f.
Efficiency
Peltier coefficient
Thomson coefficient
Seebeck coefficient
Direct energy conversion
Thomson equations
Principle:
In a semi-conductor thermogenerator, the no-load voltage and the
short-circuit current are measured as
a function of the temperature difference. The internal resistance, the
Seebeck coefficient and the efficiency are determined.
What you need:

Thermogenerator
04366.00
Flow-through heat exchanger
04366.01
03747.00
Connection box
06030.23
06112.02
Voltmeter 0.3...300 V-, 10...300 V~
07035.00
Ammeter 1/5 A DC
07038.00
03071.01
08492.93
08492.01
08487.02
38056.00
38033.00
06055.20
39282.00
07361.01
07361.04

P2410700
Electrical power generated as a function of the temperature difference.
Tasks:
1. To measure no-load voltage Uo
and short-circuit current Is at different temperature differences
and to determine the Seebeck coefficient.
2. To measure current and voltage at
a constant temperature difference
but with different load resistors,
and to determine the internal resistance Ri from the measured

values.
3. To determine the efficiency of energy conversion, from the quantity
of heat consumed and the electrical energy produced per unit time.
Laboratory Experiments, Physics 157
Electricity
Stationary currents
4.1.08-00 Peltier heat pump

Peltier effect
Heat pipe
Termoelectric e. m. f.
Peltier coefficient
Cooling capacity
Heating capacity
Efficiency rating
Thomson coefficient
Seebeck coefficient
Thomson equations
Heat conduction
Convection
Forced cooling
Joule effect
Principle:
The cooling capacity heating capacity and efficiency rating of a Peltier
heat pump are determined under different operating conditions.
What you need:

Thermogenerator
04366.00
Flow-through heat exchanger
04366.01
Air cooler
04366.02
Heating coil with sockets
04450.00
Distributor
06024.00
06112.02
Connecting plug, pack of 2
07278.05
13500.93
07128.00
03071.01
04030.93
38056.00
38033.00
39282.00
Universal clamp
37718.00
Tripod base -PASS-
02002.55
02025.55
02040.55
07360.01
07361.01
07361.04
07362.04
07362.01
03747.00

Peltier heat pump
P2410800
Pump cooling capacity as a function of the operating current.
Tasks:
1. To determine the cooling capacity
Pc the pump as a function of the
current and to calculate the efficiency rating hc at maximum output.
2. To determine the heating capacity
Pw of the pump and its efficiency
rating hw at constant current and
constant temperature on the cold
side.
3. To determine Pw , w and Pc , c
from the relationship between
temperature and time on the hot
and cold sides.
4. To investigate the temperature
behaviour when the pump is used
for cooling, with the hot side aircooled.
Electricity
Stationary currents
Characteristic curves of a solar cell 4.1.09-01

Semiconductor
p-n junction
Energy-band diagram
Fermi characteristic energy
level
Diffusion potential
Internal resistance
Efficiency
Photo-conductive effect
Acceptors
Donors
Valence band
Conduction band
Principle:
The current-voltage characteristics
of a solar cell are measured at different light intensities, the distance between the light source and the solar
cell being varied.
The depencence of no-load voltage
and short-circuit current on temperature is determined.
What you need:

Solar battery, 4 cells, 2.5 x 5 cm
06752.04
Thermopile, Moll type
08479.00
13626.93
06116.02
Ceramic lamp socket E27 with reflector, switch, safety plug 06751.01
Filament lamp with reflector, 230 V/120 W
06759.93
04030.93
03001.00
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
02025.55
02040.55
02062.00
Universal clamp
37718.00
G-clamp
02014.00
Glass pane, 150 x 100 x 4 mm, 2 off
35010.10
07128.00
38056.00
Tasks:
07361.01
07361.04
1. To determine the light intensity

with the thermopile at various
distances from the light source.

P2410901
Current-voltage characteristic at different light intensities J.
2. To measure the short-circuit current and no-load voltage at various distances from the light
source.
3. To estimate the dependence of
no-load voltage, and short-circuit
current on temperature.
5. To plot the current-votlage characteristic under different operating conditions: cooling the equipment with a blower, no cooling,
shining the light through a glass
plate.
6. To determine the characteristic
curve when illuminating by sunlight.
4. To plot the current-voltage characteristic at different light intensities.
Electricity
Stationary currents
4.1.09-15 Characteristic curves of semiconductors with FG-Module

Semiconductor
P-n junction
Energy-band diagram
Acceptors
Donors
Valence band
Conduction band
Transistor
Operating point
Principle:
Determine the current strength
flowing through a semi-conducting
diode.
Determine the collector current with
the collector voltage for various values of the base current intensity.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14525.61
12111.00
07128.00
Potentiometer 1 k, 0.4W, G2
39103.04
Plug-in board 4 mm plugs
06033.00
Transistors BC-337/40, in G3 casing
39127.20
39104.38
Silicon diode 1 N 4007, G1
39106.02
39106.03
07360.01
07360.04
07361.01
07361.04

Characteristic curves of semiconductors
with FG-Module
P2410915
Collector current/voltage characteristic of BC337 transistor.
Tasks:
1. To investigate the dependence of
the current strength flowing
through a semi-conducting diode.
2. To determine the variations of the
collector current with the collector voltage for varios values of the
base current intensity.
Electricity
Stationary currents
Characteristic and efficiency of PEM fuel cell and PEM electrolyser 4.1.11-00
Electrolysis
Electrode polarisation
Decomposition voltage
Galvanic elements
Faradays law
Principle:
In a PEM electrolyser, the electrolyte
consists of a proton-conducting
membrane and water (PEM = Proton-Exchange-Membrane). When an
electric voltage is applied, hydrogen
and oxygen are formed. The PEM fuel
cell generates electrical energy from
hydrogen and oxygen.
The electrical properties of the electrolyser and the fuel cell are investigated by recording a current-voltage
characteristic line. To determine the
efficiency, the gases are stored in
small gasometers in order to be able
to measure the quantities of the
gases generated or consumed.
What you need:

PEM fuel cell
06747.00
PEM electrolyser
06748.00
Connection box
06030.23
06056.10
06055.50
06055.20
06055.10
Short-circuit plug, black
06027.05
Gas bar
40466.00
Graduated cylinder, 100 ml, plastic
36629.01
39280.00
39282.00
43631.10
Hose connector, reducing, d = 3-5/6-10 mm
47517.01
33931.00
Beaker, 250 ml, low form, plastic
36013.01
03071.01
07136.00
38056.00
07128.00
13500.93
07361.01
07361.04
07362.01
07362.04
31246.81
Volume of the hydrogen generated by the PEM electrolyser as a function of

time at different current I.
Tasks:
1. Recording the characteristic line
of the PEM electrolyser.
2. Recording the characteristic line
of the PEM fuel cell.
3. Determination of the efficiency of
the PEM electrolysis unit.
4. Determination of the efficiency of
the PEM fuel cell.

Characteristic and efficiency
of PEM fuel cell and PEM electrolyser
P2411100
Electricity
Stationary currents
4.1.12-00 Faradays law

Electrolysis
Coulometry
Charge
Amount of substance
Faradays law
Faradays contant
Avogadros number
General equation of state for
ideal gases
Principle:
The correlation between the
amounts of substances transformed
in the electrode reaction and the applied charge (amount of electricity)
is described by Faradays law. Faradays constant, which appears as a
proportionality factor, can be determined experimentally from this dependence.
What you need:

Electrolysis apparatus - Hofmann
Platinum electrode in protective tube, d = 8 mm
On/Off switch
Right angle clamp
Universal clamp
Barometer/Manometer, hand-held
Digital thermometer, NiCr-Ni
Rubber caps, 10 pcs
Sulphuric acid, 95-98%, 500 ml
Weather monitor, 6 lines LCD
13500.93
07128.00
44518.00
45206.00
06034.01
07362.04
07361.01
07360.01
37694.00
37697.00
37718.00
03071.01
07136.00
07050.00
36015.00
45023.93
36590.00
39275.03
34459.00
33931.00
30219.50
31246.81
87997.10
48852.93
1
1
1
2
1
1
1
2
1
4
3
1
1
1
1
1
1
1
1
1
1
1
1
1

Faradays law
P2411200
Correlations between the transferred charge and the evolved volumes of hydrogen and oxygen in the electrolysis of diluted sulphuric acid (T = 296.05 K
and p = 100.4 kPa)
Tasks:
Determine Faradays constant from
the dependence of the volumes of
hydrogen and oxygen evolved on the
applied charge in the hydrolysis of
diluted sulphuric acid.
Electricity
Stationary currents
Second order conductors. Electrolysis with FG-Module 4.1.13-15

Electrolysis
Conductivity
Ohms law
Principle:
In this experiment a copper(II) sulphate solution is to be electrolysed
using two different materials graphite electrodes and copper
wires. During the electrolyses the
current/voltage curves are recorded.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14525.61
12111.00
Retort stand, 210 mm x 130 mm, h = 500 mm
37692.00
Right angle clamp
37697.00
Support for two electrodes
45284.01
Graphite electrodes, d = 5 mm, l = 150 mm, 6 pcs.
44510.00
06106.03
36003.00
36629.00
Precision Balance, Sartorius TE 412
48835.93
Spoon with spatula end, l = 150 mm, steel, wide
33398.00
40485.05
33931.00
Copper-II sulphate, cryst., 250 g
30126.25
31246.81
07361.01
07361.04

Second order conductors.
Electrolysis with FG-Module
P2411315
Current/voltage characteristics of an aqueous copper sulphate solution conducted with graphite electrodes and copper wires.
Tasks:
Measure the correlation between
voltage and current on second order
conductors (copper (II) sulphate solution using two different materials graphite electrodes and copper
wires.
Electricity
Electric field
4.2.01-00 Electrical fields and potentials in the plate capacitor

Capacitor
Electric field
Potential
Voltage
Equipotential lines
Principle:
A uniform electric field E is produced between the charged plates of

a plate capacitor. The strength of the
field is determined with the electric
field strength meter, as a function of
the plate spacing d and the voltage
U. The potential within the field is
measured with a potential measuring probe.
What you need:

Capacitor plate 283 mm x 283 mm
06233.02
Capacitor plate with hole, d = 55 mm
11500.01
Spacer plates, 1 set
06228.01
Electric field meter
11500.10
Potential probe
11501.00
Power supply, regulated, 0...600 V-
13672.93
Blow lamp, butan cartridge, X2000
46930.00
47535.00
39282.00
07128.00
Connecting cable, 4 mm plug, 32 A, green-yellow, l = 10 cm 07359.15
07362.01
07362.04
08283.00
08284.00
08286.02
08286.01
02031.00
02025.55
02040.55
09937.01
Barrel base -PASS-
02006.55
High value resistors, 10 M
07160.00

Electrical fields and potentials
in the plate capacitor
P2420100
Electric field strength as a function of the plate voltage.
Tasks:
1. The relationship between voltage
and electric field strength is investigated, with constant plate spacing.
3. In the plate capacitor, the potential is measured with a probe, as a

function of position.
2. The relationship between electric

field strength and plate spacing is
investigated, with constant voltage.
Electricity
Electric field
Charging curve of a capacitor 4.2.02-01

Charging
Discharging
Time constant
Exponential function
Half life
Principle:
A capacitor is charged by way of a
resistor. The current is measured as a
function of time and the effects of
capacitance, resistance and the voltage applied are determined.
What you need:

Connection box
06030.23
Two way switch, single pole
06030.00
Capacitor 2 x 30 F
06219.32
39104.63
Carbon resistor 1 M, 1W, G1
39104.52
Connecting plug white 19 mm pitch
39170.00
Capacitor 1 microF/ 250 V, G2
39113.01
Capacitor 4,7 microF/ 250 V, G2
39113.03
13505.93
03071.01
07128.00
07360.01
07360.04

P2420201
Course of current with time at different capacitance values; voltage and
resistance are constant (U = 9 V, R = 2.2 M).
Tasks:
To measure the charging current
over time:
3. using different voltages (R and C

constant).
1. using different capacitance values

C, with constant voltage U and
constant resistance R
To determine the equation representing the current when a capacitor

is being charged, from the values
measured.
2 using different resistance values

(C and U constant)
Electricity
Electric field
4.2.02-15 Switch-on behaviour of a capacitor and an inductivity with FG-Module

Charging
Discharging
Time constant
Half life
Principle:
To measure the course of current
strength and voltage ina capacitance/inductivity in the instant of
switching on. The capacitance/inductivity is determined from the
measurement curve.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14525.61
12111.00
Connection box
06030.23
On/Off switch
06034.01
39104.64
39104.15
Electrolyte capacitors non-polarised, G1, 47 F
39105.45
Coil, 900 turns
06512.01
07360.01
07360.04
07361.01
07361.04
The course of the voltage and the current intensity during a switching on
process in a coil.

Switch-on behaviour of a capacitor and
an inductivity with FG-Module
P2420215
Tasks:
1. To measure the course of current
strength and voltage in a capacitance in the instant of switching
on. The capacitance is determined
from the measurement curve.
2. To measure the course of current
strength and voltage in inductivity
in the instant of switching on. The
inductivity is determined from the
measurement curve.
The course of the voltage and the current intensity during a switching on
process in a capacitance.
Electricity
Electric field
Capacitance of metal spheres and of a spherical capacitor 4.2.03-00

Voltage
Potential
Charge
Electric field
Electrostatic induction
constant
Capacitance
Capacitor
Dielectrics
Principle:
Metal spheres with different radii
and a spherical capacitor are
charged by means of a variable voltage. The induced charges are determined with a measuring amplifier.
The corresponding capacitances are
deduced from voltage and charge
values.
What you need:

Conducting ball, d = 20 mm
06236.00
06237.00
06238.00
Hemispheres, Cavendish type
06273.00
Hollow plastic ball with eyelet
06245.00
Capillary tube, AR-glass, straight, l = 250 mm
36709.00
06106.03
Insulating stem
06021.00
07160.00
13670.93
39105.14
13626.93
07028.01
07128.00
Connecting cable, 30 kV, l = 1000 mm
07367.00
07542.11
07542.20
07542.21
07542.26
Vernier caliper, plastic
03011.00
Barrel base -PASS02006.55
Support base -PASS02005.55
02027.55
02026.55
37716.00
Crocodile clips, black, strong version, pack of 10
29426.03
07361.04
07361.01
2
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
1
4
1
1
1
1
1
2
2
2

Capacitance of metal spheres
and of spherical capacitor
P2420300
U1 (measured voltage) as a function of U2 (charging voltage) measured on

conducting spheres with three different diameters.
Tasks:
1. Determination of the capacitance
of three metal spheres with different diameters.
3. Determination of the diameters of

each test body and calculation of
their capacitance values.
2. Determination of the capacitance

of a spherical capacitor.
Electricity
Electric field
4.2.04-01 Coulombs law / Image charge

Electric field
Electric field strenght
Electric flux
Electric constant
Surface charge density
Dielectric displacement
Electrostatic potential
Principle:
A small electrically charged ball is
positioned at a certain distance in
front of a metal plate lying at earth
potential. The surface charge on the
plate due to electrostatic induction
together with the charged ball forms
an electric field analogous to that
which exists between two oppositely
charged point garges.
The electrostatic force acting on the
ball can be measured with a sensitive
torsion dynamometer.
What you need:

Capacitor plate 283 mm x 283 mm
06233.02
Insulating stem
06021.00
06237.00
Conducting spheres with suspension
02416.01
02416.00
02204.00
03916.00
Direct current measuring amplifier
13620.93
Power supply, high voltage, 0-25 kV
13671.93
07128.00
07367.00
07542.12
07542.20
07361.01
07362.01
07362.04
Support base -PASS-
02005.55
02040.55
02028.55
Holder for U-magnet
06509.00
Barrel base -PASS-
02006.55

P2420401
Relationship between electrostatic force F and the square of the charge Q

for various distances (a) between ball and plate.
Tasks:
1. Establishment of the relation
between the active force and the
charge on the ball.
3. Determination of the electric constant.
2. Establishment of the relation

between force and distance, ball
to metal plate.
Electricity
Electric field
Coulombs law with Cobra3 4.2.04-15

Electric field strength
Law of distance
Principle:
A small electrically charged ball is
positioned at a certain distance in
front of a second charged ball. The
force between these balls is measured as a function of their charge
and distance (Coulombs law). For
the measurements a sensitive force
sensor and an electrometer amplifier
are used.
What you need:

Cobra3 BASIC-UNIT
12150.00
14515.61
12110.00
Newton Sensor
12110.01
Insulating bar for Force Sensor
12110.02
Plug with socket and crosshole, 2 pcs.
07206.01
06237.00
Power supply 12V/2A
12151.99
14602.00
13670.93
07367.00
07360.04
08283.00
08284.00
08286.01
08286.02
08713.00
Electrometer Amplifier
13621.00
Data cable for Cobra probes
12150.07
39170.00
39105.14
Power supply 12V AC/500 mA
11074.93

P2420415
The force as a function of 1/r2, where r is the distance between the balls.
Tasks:
1. Measure the force between two
small electrically charged balls as
a function of their charge if both
balls are positively charged (+ +),
both negatively (- -) or one positive one negative (+ -).
2. Measure the force between the
charged balls as a function of the
distance.
3. Compare the measured results
with theoretical values.
Electricity
Electric field
4.2.05-00 Coulomb potential and Coulomb field of metal spheres

Electric field
Field intensity
Electric flow
Electric charge
Gaussian rule
Induction
Induction constant
Capacitance
Gradient
Image charge
Potential difference
Principle:
Conducting spheres with different
diameters are charged electrically.
The static potentials and the accompanying electric field intensities are
determined by means of an electric
field meter with a potential measuring probe, as a function of position
and voltage.
What you need:

Electric field meter
11500.10
Potential probe
11501.00
Tasks:
Capacitor plate with hole, d = 55 mm
11500.01
13670.93
06236.00
06237.00
1. For a conducting sphere of diameter 2R = 12 cm, electrostatic potential is determined as a function

of voltage at a constant distance
from the surface of the sphere.
06238.00
07160.00
Insulating stem
06021.00
13505.93
07028.01
Barrel base -PASS-
02006.55
Stand tube
02060.00
Tripod base -PASS-
02002.55
1
1
03001.00
39282.00
32178.00
47535.00
07366.00
07362.01
07362.04
2. For the conducting spheres of diameters 2R = 12 cm and 2R = 4 cm,

electrostatic potential at constant
voltage is determined as a function of the distance from the surface of the sphere.
3. For both conducting spheres, electric field strenght is determined as
a function of charging voltage at
three different distances from the
surface of the sphere.
Field strenght as a function of

voltage.
4. For the conducting sphere of diameter 2R = 12 cm, electric field

strenght is determined as a function of the distance from the surface of the sphere at constant
charging voltage.
Graphs 1-3: sphere with 2R = 12 cm;

r1 = 25 cm, r2 = 50 cm, r3 = 75 cm;
graph 4: sphere with 2R = 4 cm;
r1 = 25 cm.

Coulomb potential and Coulomb field
of metal spheres
P2420500
Electricity
Electric field
Dielectric constant of different materials 4.2.06-00

Maxwells equations
Electric constant
Capacitance of a plate
capacitor
Real charges
Free charges
Dielectric polarisation
Dielectric constant
Principle:
The electric constant 0 is determined by measuring the charge of a
plate capacitor to which a voltage is
applied. The dielectric constant is
determined in the same way, with
plastic or glass filling the space
between the plates.
What you need:

Plate capacitor, d = 260 mm
06220.00
Plastic plate 283 x 283 mm
06233.01
Glass plate for current conductors
06406.00
07160.00
13626.93
13670.93
39105.19
Voltmeter 0.3...300 V-, 10...300 V~
07035.00
07361.01
07361.04
07366.00
07542.11
07542.20
07542.21
07542.26

P2420600
1000
Q
nAs
800
plastic
X
X
600
1,0
2,0
400
3,0
4,0
X
X
X
X
air
200
X
X
X
X
X
Uc
kV
Electrostatic charge Q of a plate capacitor as a function of the applied voltage Uc, with and without dielectric (plastic) between the plates (d = 0.98 cm)
Tasks:
1. The relation between charge Q
and voltage U is to be measured
using a plate capacitor.
2. The electric constant 0 is to be
determined from the relation
measured under point 1.
3. The charge of a plate capacitor is
to be measured as a function of
the inverse of the distance
between the plates, under constant voltage.
4. The relation between charge Q

and voltage U is to be measured
by means of a plate capacitor,
between the plates of which different solid dielectric media are
introduced. The corresponding
dielectric constants are determined by comparison with measurements performed with air
between the capacitor plates.
Electricity
Magnetic field
4.3.01-00 Earths magnetic field

Magnetic inclination and
declination
Isoclinic lines
Isogenic lines
Inclinometer
Magnetic flow density
Helmholtz coils
Principle:
A constant magnetic field, its magnitude and direction known, is superimposed on the unknown earthmagnetic field. The earth-magnetic
field can then be calculated from the
magnitude and direction of the resulting flux density.
What you need:

Helmholtz coils, one pair
06960.00
13500.93
06114.02
Teslameter, digital
13610.93
Hall probe, axial
13610.01
07128.00
Magnetometer
06355.00
Barrel base -PASS-
02006.55
02040.55
02025.55
Stand tube
02060.00
07363.01
07363.04

P2430100
Linear function to determine the horizontal component hBE of the magnetic

flux density of the earth-magnetic field.
Tasks:
1. The magnetic flux of a pair of
Helmholtz coils is to be determined and plotted graphically as
a function of the coil current. The
Helmholtz system calibration factor is calculated from the slope of
the line.
2. The horizontal component of the
earth-magnetic field is determined through superimposition of
the Helmholtz field.
3. The angle of inclination must be
determined in order to calculate
the vertical component of the
earth-magnetic field.
Electricity
Magnetic field
Magnetic field of single coils / Biot-Savarts law
4.3.02-01/15

Wire loop
Biot-Savarts law
Hall effect
Magnetic field
Induction
Magnetic flux density
Principle:
The magnetic field along the axis of
wire loops and coils of different dimensions is measured with a teslameter (Hall probe). The relationship
between the maximum field strength
and the dimensions is investigated
and a comparison is made between
the measured and the theoretical effects of position.
What you need:

Experiment P2430201 with teslameter
Teslameter, digital
Induction coil, 300 turns, d = 40 mm
Conductors, circular, set
Hall probe, axial
Distributor
Right angle clamp -PASSG-clamp
Reducing plug 4 mm/2 mm socket, 1 pair
Bench clamp -PASSPlate holder, opening width 0...10 mm
Cobra3 BASIC-UNIT
Cobra3 measuring module Tesla
13610.93
07128.00
11006.01
11006.02
11006.03
11006.04
11006.05
11006.06
11006.07
06404.00
13610.01
13500.93
06024.00
03001.00
02006.55
02025.55
02040.55
02014.00
02074.01
11620.27
07361.04
07361.01
02010.00
02062.00
02412.00
02407.00
12150.00
14515.61
12109.00
12126.00
12004.10
07542.27
07542.20
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
1
1
1
2
1
1
1
1
1
1
1
1
1
2
1
Curve of magnetic flux density (measured values) for coils with a constant
density of turns n/l, coils radius R = 20 mm, lengths l1 = 53 mm, l2 = 105 mm
and l3 = 160 mm.
Tasks:
1. To measure the magnetic flux
density in the middle of various
wire loops with the Hall probe and
to investigate its dependence on
the radius and number of turns.
2. To determine the magnetic field

constant 0.
density along the axis of long coils
and compare it with theoretical
values.
Power supply 12V/2A

12151.99
14602.00
1
1

Magnetic field of a single coils /
Biot-Savarts law
P24302 01/15
Electricity
4.3.03-01/15
Magnetic field
Magnetic field of paired coils in Helmholtz arrangement

Maxwells equations
Wire loop
Flat coils
Biot-Savarts law
Hall effect
Principle:
The spatial distribution of the field
strength between a pair of coils in
the Helmholtz arrangement is measured. The spacing at which a uniform magnetic field is produced is
investigated and the superposition of
the two individual fields to form the
combined field of the pair of coils is
demonstrated.
What you need:

Experiment P2430301 with teslameter
Teslameter, digital
Hall probe, axial
Right angle clamp -PASSG-clamp
Bench clamp -PASSPlate holder, opening width 0...10 mm
Cobra3 BASIC-UNIT
Power supply 12V/2A
13610.93
07128.00
06960.00
13500.93
13610.01
03001.00
02006.55
02025.55
02040.55
02014.00
07361.04
07361.01
02010.00
02062.00
02412.00
02407.00
12150.00
14515.61
12109.00
12126.00
12004.10
07542.27
07542.20
12151.99
14602.00
1
1
1
1
1
2
1
1
1
3
2
2
1
1
1
2
1
1
2
3
2
2
1
1
1
1
1
1
1
1
1
2
1
1
1

Magnetic field of paired coils
in Helmholtz arrangement
P24303 01/15
B (r = 0; r is the distance perpendicular to the axis of the coils) as a function

of z (z is the distance from the center of the coils in the direction of the axis
of the coils) with the parameter .
Tasks:
density along the z-axis of the flat
coils when the distance between
them a = R (R = radius of the
coils) and when it is larger and
smaller than this.
2. To measure the spatial distribution
of the magnetic flux density when
the distance between coils a = R,
using the rotational symmetry of
the set-up:
b) measurement of radial component Br.

3. To measure the radial components
Br and Br of the two individual
coils in the plane midway between
them and to demonstrate the
overlapping of the two fields at
Br = 0.
a) measurement of the axial component Bz

Electricity
Magnetic field
Magnetic moment in the magnetic field 4.3.04-00

Torque
Magnetic flux
Helmholtz coils
Principle:
A conductor loop carrying a current
in a uniform magnetic field experiences a torque. This is determined as
a function of the radius, of the number of turns and the current in the
conductor loop and of the strength
of the external field.
What you need:

06960.00
Conductors, circular, set
06404.00
02416.00
Coil carrier for torsion dynamometer
02416.02
Distributor
06024.00
13500.93
13530.93
07128.00
Support base -PASS-
02005.55
02027.55
02040.55
07362.01
07362.04

P2430400
Torque due to a magnetic moment in a uniform magnetic field as a function

of the angle between the magnetic field and magnetic moment.
Tasks:
Determination of the torque due to a

magnetic moment in a uniform magnetic field, as a function
2. of the angle between the magnetic field in the magnetic moment,
1. of the strength of the magnetic

field,

moment.
Electricity
Magnetic field
4.3.05-00 Magnetic field outside a straight conductor

Maxwells equations
Magnetic flux
Induction
Superimposition of magnetic
fields
Principle:
A current which flows through one
or two neighbouring straight conductors produces a magnetic field
around them. The dependences of
these magnetic fields on the distance from the conductor and on the
current are determined.
What you need:

Electric conductors, set of 4
06400.00
Coil, 6 turns
06510.00
Coil, 140 turns, 6 tappings
06526.01
Clamping device
06506.00
Iron core, rod shaped, laminated
06500.00
06501.00
13530.93
Teslameter, digital
13610.93
Hall probe, axial
13610.01
Current transformer/Clamp Ampermeter adaptor
07091.00
07128.00
03001.00
Barrel base -PASS-
02006.55
02026.55
02040.55
G-clamp
02014.00
07361.02

Magnetic field outside a straight conductor P2430500
Magnetic field component By of two parallel conductors on the x-axis as a

function of the distance from one conductor, if the current in both conductors is in the same direction.
Tasks:
Determination of the magnetic field
1. of a straight conductor as a function of the current,
2. of a straight conductor as a function of the distance from the conductor,
3. of two parallel conductors, in
which the current is flowing in
the same direction, as a function
of the distance from one conductor on the line joining the two
conductors,
4. of two parallel conductors, in
which the current is flowing in
opposite directions, as a function
of the distance from one conductor on the line joining the two
conductors.
Electricity
Magnetic field
Magnetic field inside a conductor 4.3.06-00

Maxwells equations
Magnetic flux
Induction
Current density
Field strength
Principle:
A current which produces a magnetic field is passed through an electrolyte. This magnetic field inside the
conductor is determined as a function of position and current.
What you need:

Hollow cylinder, PLEXIGLAS
11003.10
Search coil, plane
11004.00
13650.93
LF amplifier, 220 V
13625.93
07128.00
07542.27
Distributor
06024.00
1
1
03001.00
02201.00
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
02026.55
02040.55
07542.12
07361.02
07361.04
Hydrochloric acid 37 %, 1000 ml
30214.70

P2430600
Magnetic field inside a conductor as a function of the position x (x = height

of the probe perpendicular to the axis of the cylinder).
Tasks:
Determination of the magnetic field
inside a conductor as a function
1. of the current in the conductor,
the conductor.
Electricity
Magnetic field
4.3.07-11 Ferromagnetic hysteresis with PC interface system

Induction
Magnetic flux, coil
Magnetic field strength
Magnetic field of coils
Remanence
Coercive field strength
Principle:
A magnetic field is generated in a
ring-shaped iron core by a continuous adjustable direct current applied
to two coils. The field strength H
and the flux density B are measured
and the hysteresis recorded.
The remanence and the coercive field
strength of two different iron cores
can be compared.
What you need:

Coil, 600 turns
06514.01
Iron core, U-shaped, solid
06491.00
Iron core, rod shaped, solid
06490.00
06501.00
06500.00
Commutator switch
06034.03
Power supply, universal, with analog display
13501.93
06110.02
Hall probe, tangential, with protective cap
13610.02
Barrel base -PASS-
02006.55
02040.55
Support rod with hole, stainless steel, l = 150 mm
02030.15
1
4
07362.01
07362.04
Cobra3 BASIC-UNIT
12150.00
Hysteresis for a massive iron core.
Power supply 12V/2A
12151.99
12109.00
Tasks:
14515.61
14602.00
Record the hysteresis curve for a

massive iron core and for a laminated one.

with PC interface system
P2430711
Electricity
Magnetic field
Magnetostriction with the Michelson interferometer 4.3.08-00

Interference
Wavelength
Diffraction index
Speed of light
Phase
Ferromagnetic material
Weiss molecular magnetic
fields
Spin-orbit coupling
Principle:
With the aid of two mirrors in a
Michelson arrangement, light is
brought to interference. Due to the
magnetostrictive effect, one of the
mirrors is shifted by variation in the
magnetic field applied to a sample,
and the change in the interference
pattern is observed.
What you need:

08700.00
Laser, He-Ne 0.2/1.0 mW, 220 V AC*
08180.93
08711.00
08711.01
08710.00
08719.00
08741.00
08018.01
08723.00
09826.00
Faraday modulator for optical base plate
08733.00
Rods for magnetotriction, set of 3
08733.01
13500.93
07128.00
07496.10
07361.04
Measuring results of the magnetostriction of nickel with the relative change

in length l/l plotted against applied field strength H.
*Alternative:
08701.00
Tasks:
08702.93
1. Construction of a Michelson interferometer using separate optical

components.

Magnetostriction with the Michelson
interferometer
P2430800
2. Testing various ferromagnetic materials (iron and nickel) as well as

a non-ferromagnetic material
(copper), with regard to their
magnetostrictive properties.
Electricity
Electrodynamics
4.4.01-00 Transformer
Induction
Magnetic flux
Loaded transformer
Unloaded transformer
Coil
Principle:
An alternating voltage is applied to
one of two coils (primary coil) which
are located on a common iron core.
The voltage induced in the second
coil (secondary coil) and the current
flowing in it are investigated as
functions of the number of turns in
the coils and of the current flowing
in the primary coil.
What you need:

Coil, 140 turns, 6 tappings
06526.01
Clamping device
06506.00
06501.00
06500.00
13533.93
Two-way switch, double pole
06032.00
06110.02
07128.00
07361.01
07361.04

Transformer
P2440100
Secondary short-circuit current of the transformer as a function

1. of the number of turns in the secondary coil,
2. of the number of turns in the primary coil.
Tasks:
The secondary voltage on the open
circuited transformer is determined
as a function
1. of the number of turns in the
primary coil,
secondary coil,
3. of the primary voltage.
The short-circuit current on the secondary side is determined as a function
4. of the number of turns in the primary coil,

secondary coil,
6. of the primary current.
With the transformer loaded, the
primary current is determined as a
function
7. of the secondary current,
secondary coil,
primary coil.
Electricity
Electrodynamics
Magnetic Induction
4.4.02-01/15

Maxwells equations
Electrical eddy field
Coil
Magnetic flux
Induced voltage
Principle:
A magnetic field of variable frequency and varying strength is produced
in a long coil. The voltages induced
across thin coils which are pushed
into the long coil are determined as
a function of frequency, number of
turns, diameter and field strength.
What you need:

Experiment P2440201 with counter
Function generator
13652.93
13600.93
07128.00
Field coil 750 mm, 485 turns/m
11001.00
11006.01
11006.02
11006.03
11006.04
11006.05
11006.06
11006.07
07362.01
07362.04
07365.04
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14525.61
14504.61
12111.00

Magnetic Induction
P24402 01/15
Induced voltage as a function of current for different coils.
Tasks:
Determination of the induction voltage as a function
field,
2. of the frequency of the magnetic
field,
3. of the number of turns of the induction coil,
4. of the cross-section of the induction coil.
Electricity
4.4.03-01/11
Electrodynamics
Lenzs law
Self-inductance
Solenoids
Transformer
Oscillatory circuit
Resonance
Damped oscillation
Q factor
Principle:
A square wave voltage of low frequency is applied to oscillatory circuits comprising coils and capacitors
to produce free, damped oscillations.
The values of inductance are calculated from the natural frequencies
measured, the capacitance being
known.
What you need:

Function generator
Coil, 1200 turns
Connection box
Cobra3 BASIC-UNIT
Power supply 12V/2A
13652.93
11459.95
07542.26
11006.01
11006.02
11006.03
11006.04
11006.05
11006.06
11006.07
06515.01
39105.20
06030.23
07360.01
07360.04
07361.01
07361.04
12150.00
12151.99
14602.00
14504.61
14525.61
12111.00
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
2
1
1
1
1
Inductance per turn as a function of the length of the coil at constant radius.

Inductance of solenoids with Cobra3
P24403 01/11
Tasks:
To connect coils of different dimensions (length, radius, number of
turns) with a known capacitance C
to form an oscillatory circuit. From
the measurements of the natural frequencies, to calculate the induc182 Laboratory Experiments Physics
tances of the coils and determine the

relationships between:
1. inductance and number of turns
2. inductance and length
Measurement of the oscillation period with the Survey Function.
3. inductance and radius.

Electricity
Electrodynamics
4.4.04-01/11

Inductance
Kirchhoffs laws
Maxwells equations
AC impedance
Phase displacement
Principle:
The coil is connected in a circuit with
a voltage source of variable frequency. The impedance and phase displacements are determined as functions of frequency. Parallel and series
impedances are measured.
What you need:

Function generator
13652.93
11459.95
Difference amplifier
11444.93
13600.93
07542.11
07359.01
Coil, 300 turns
06513.01
Coil, 600 turns
06514.01
Connection box
06030.23
07361.01
07361.04
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14525.61
14504.61
Tasks:
12111.00
07360.01
1. Determination of the impedance

of a coil as a function of frequency.
07360.04
39104.62
39104.63
39104.64

P24404 01/11
Tangent of the current-voltage phase displacement as a function of the

frequency used for calculation of the total inductance of coils connected in
parallel and in series.
2. Determination of the inductance

of the coil.
3. Determination of the phase displacement between the terminal
voltage and total current as a
function of the frequency in the
circuit.
4. Determination of the total
impedance of coils connected in
parallel and in series.
Electricity
4.4.05-01/15
Electrodynamics

Capacitance
Kirchhoffs laws
Maxwells equations
AC impedance
Phase displacement
Principle:
A capacitor is connected in a circuit
with a variable-frequency voltage
source. The impedance and phase
displacement are determined as a
function of frequency and of capacitance. Parallel and series impedances
are measured.
What you need:

Function generator
13652.93
11459.95
11444.93
13600.93
07542.11
07359.01
39104.62
39104.63
39104.64
39113.01
Capacitor 4,7microF/ 250 V, G2
39113.02
39113.03
Connection box
06030.23
07361.01
07361.04
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14525.61
14504.61
12111.00
Impedance of various capacitors as a function of the frequency.
Tasks:
1. Determination of the impedance
of a capacitor as a function of
frequency.
2. Determination of the phase displacement between the terminal

voltage and total current as a
function of the frequency in the
circuit.

P24405 01/15
3. Determination of the total

impedance of capacitors connected in parallel and in series.
Electricity
Electrodynamics
RLC Circuit
4.4.06-01/11

Series-tuned circuit
Parallel-tuned circuit
Resistance
Capacitance
Inductance
Capacitor
Coil
Phase displacement
Q factor
Band-width
Loss resistance
Damping
Principle:
The current and voltage of parallel
and series-tuned circuits are investigated as a function of frequency.
Q-factor and bandwidth are determined.
What you need:

Function generator
13652.93
13600.93
07034.00
Coil, 300 turns
06513.01
39170.00
39104.01
39104.62
39104.15
Carbon resistor 1k, 1W, G1
39104.19
39113.01
39105.18
07360.01
07360.04
07361.01
07361.04
Connection box
06030.23
Cobra3 BASIC-UNIT
12150.00
Determination of the frequency performance of a
Power supply 12V/2A
12151.99
1. Series-tuned circuit for
14602.00
14525.61
a) voltage resonance
damping resistor,
without
b) voltage resonance without parallel resistor
14504.61
without
12111.00
b) current resonance
damping resistor,
c) voltage resonance with parallel

resistor.
Total voltage as a function of frequency in the parallel tuned circuit. Curves

recorded for different resistors(top down): R = , 1000 , 470 .
Tasks:
2. Parallel-tuned circuit for
a) current resonance without parallel resistor,
c) current resonance with damping resistor.

RLC Circuit
P24406 01/11
Electricity
Electrodynamics
4.4.07-00 Rectifier circuits

Half-wave rectifier
Full-wave rectifier
Graetz rectifier
Diode and Zener diode
Avalanche effect
Charging capacitor
Ripple
r.m.s. value
Internal resistance
Smoothing factor
Ripple voltage
Voltage stabilisation
Voltage doubling
Principle:
The ripple of the output voltage of
various rectifier circuits is measured
as a function of the load current
strength and the charging capacitance. The characteristics of a voltage stabilizer and of a multiplier are
investigated.
What you need:

06033.00
39106.02
Electrolyte capacitors, G1, 470 F
39105.26
39105.28
Electrolyte capacitors, G2, 2200 F
39113.08
06049.09
39104.15
39104.62
Siliziumdiode ZF 4.7, G1
39132.01
13533.93
11459.95
07128.00
06116.02
07542.26
Tasks:
39170.00
07360.01
07360.04
07361.01
07361.04
1. Using the half-wave rectifier:

a) to display the output voltage
(without charging capacitor) on
the oscilloscope
b) to measure the diode current ID as
a function of the output current
strength Io (with the charging
capacitor)
c) to measure the ripple component
UACpp of the output voltage as a
function of the output current
(C = constant)
d) to measure the ripple as a function
of the capacitance (Io = constant)
e) to measure the output voltage Uo
as a function of the input voltage
Ui (Io = 0).
2. Using the bridge rectifier:
a) to display the output voltage
(without charging capacitor) on
the oscilloscope

Rectifier circuits
P2440700
Ripple of the output voltage as a function of the charging current:

a) half-wave rectifier, b) bridge rectifier.
b) to measure the current through

one diode, ID, as a function of the
output current Io (with the charging capacitor)
c) to measure the ripple of the output voltage as a function of the
output current (C = constant)
d) to measure the ripple as a function
of the capacitance (Io = constant)
e) to measure the output voltage as
a function of the input voltage.
3. To measure the voltage at the
charging capacitor, Uc, and the
output voltage of a stabilized
voltage source as a function of
the input voltage Ui.
4. To measure the output voltage of
a voltage multiplier circuit as a
function of the input voltage.
Electricity
Electrodynamics
RC Filters 4.4.08-00
High-pass
Low-pass
Wien-Robinson bridge
Parallel-T filters
Differentiating network
Integrating network
Step response
Square wave
Transfer function
Principle:
The frequency response of simple RC
filters is recorded by point-by-point
measurements and the sweep displayed on the oscilloscope.
What you need:

06033.00
06057.50
39105.14
Carbon resistor 1k, 1W, G1
39104.19
39170.00
11444.93
Wobble-functiongenerator 1 Hz-10 MHz
11766.95
11459.95
07542.26
07359.02
07361.01
07361.04
07542.10
07542.12

RC Filters
P2440800
Frequency response of high-pass and low pass filter.
Tasks:
To record the frequency response of
the output voltage of
To investigate the step response of
1. a high-pass filter
7. an integrating network
6. a differentiating network
2. a low-pass filter
3. a band-pass filter
4. a Wien-Robinson bridge
5. a parallel-T filter,
point by point and to display the
sweep on the oscilloscope.
Electricity
4.4.09-01/15
Electrodynamics

Circuit
Resistance
Capacitance
Inductance
Capacitor
Coil
Phase displacement
Filter
Kirchhoffs laws
Bode diagram
Principle:
A coil, a capacitor, an ohmic resistance and combinations of these
components are investigated for
their filter characteristics as a function of frequency. The phase displacement of the filters is determined also as a function of frequency.
What you need:

Function generator
13652.93
11459.95
13600.93
11444.93
07542.11
07359.04
Coil, 300 turns
06513.01
39104.62
39104.19
39113.01
39113.02
07361.01
07361.04
Connection box
06030.23
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
Tasks:
14602.00
14525.61
Determination of the ratio of output

voltage to input voltage with the
14504.61
1. RC/CR network,
12111.00
2. RL/LR network,
07360.01
3. CL/LC network,
07360.04
4. Two CR networks connected in

series.
U/U1 as a function of the frequency with the LC and CL network.
5. Determination of the phase displacement with the RC/CR network.

6. Determination of the phase displacement with two CR networks
connected in series.

P24409 01/15
Electricity
Electrodynamics
RLC measuring bridge 4.4.10-00

Wheatstone bridge
Inductive and capacitive
reactance
Ohmic resistance
Impedance
Kirchhoffs laws
Principle:
Ohmic resistances, inductances and
capacitances are determined in a
Wheatstone bridge circuit operated
on AC. Balancing is done aurally
through headphones, using the high
sensitivity of the human ear.
What you need:

Simple slide wire measuring bridge
Head phones, stereo
Function generator
Coil, 6 turns
Coil, 300 turns
Coil, 600 turns
Coil, 1200 turns
Coil, 600 turns, short
Carbon resistor G1, 680 , 1 W
Carbon resistor 1,5 k, 1W, G1
Potentiometer 100 , 0.4W, G2
Capacitor 100 pF/100 V, G2
Connection box
Headphone Adapter jack plug/2 x 4 mm plug
07182.00
65974.00
13652.93
06510.00
06513.01
06514.01
06515.01
06522.01
11006.01
39104.13
39104.15
39104.17
39104.19
39104.21
39104.23
39104.25
39103.01
39104.19
39105.04
39105.07
39105.10
39105.14
39105.17
39105.18
06030.23
07360.04
07361.04
07362.04
65974.01
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2
2
1
Wheatstone bridge.
Tasks:
To determine
1. ohmic resistances
2. inductances
3. capacitances
with the Wheatstone bridge, using
bridge balancing.

P2441000
Electricity
Electrodynamics
4.4.11-00 Resistance, phase shift and power in AC circuits

Impedance
Phase shift
Phasor diagram
Capacitance
Self-inductance
Principle:
Series circuits containing self-inductances or capacitances and ohmic
resistances are investigated as a
function of frequency. Measuring the
electrical magnitudes with a work or
power measurement instrument, real
power or apparent power can be displayed directly.
What you need:

Work and power meter
13715.93
13650.93
Coil, 300 turns
06513.01
Connection box
06030.23
Electrolyte capacitors non-polarised, G1, 47 F
39105.45
Carbon resistor 10 Ohm, 1W, G1
39104.01
07361.05
Z2
2
X
1100
1000
900
800
700
X
600

Resistance, phase shift and power
in AC circuits
P2441100
500
X
400
X
300
X
200
X
X
X
100
10
20
30
40
50
60
70
80
90
100
1/f 2
10-6 Hz2
Capacitor and resistor in series, Z2 as a function of 1/f2.
Tasks:
1. Series circuit of self-inductance

and resistor (real coil)
Determination of self-inductance
and ohmic resistance
Investigation of impedance and

phase shift as a function of frequency
2. Series circuit of capacitor and resistor
Investigation of the relation between real power and current intensity
phase shift as a function of frequency
Investigation of impedance and
Investigation of the relation between real power and current intensity

Determination of capacitance and
ohmic resistance
Electricity
Electrodynamics
Induction impulse 4.4.12-11

Law of induction
Magnetic flux
Maxwells equations
Principle:
A permanent magnet falls with different velocities through a coil. The
change in the magnetic flux generates an induced voltage impulse.
The induced voltage impulse USS is
recorded with a computer interface
system. Depending on the polarity of
the permanent magnet the induced
voltage impulse is negative or positive.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
14504.61
14525.61
11207.20
02037.00
Bosshead
02043.00
Tripod base -PASS-
02002.55
Universal clamp
37718.00
45126.01
Coil holder
06528.00
06522.01
Measured induction voltage USS versus time. Additionally the evaluation of

the peak-to-peak voltage USS = 2.766 V is shown.
Magnet, d = 8 mm, l = 60 mm
06317.00
07361.01
07361.04
Tasks:
07361.02
1. Measurement of the induced voltage impulse USS and the falling

magnets velocity.

Induction impulse
P2441211
2. Evaluation of the induced voltage

impulse USS as a function of the
magnets velocity.
3. Calculation of the magnetic flux
induced by the falling magnet as a
function of the magnets velocity.
Electricity
4.5.02-00 Coupled oscillating circuits

Resonance
Q factor
Dissipation factor
Bandwidth
Critical or optimum coupling
Characteristic impedance
Pauli method
Parallel conductance
Band-pass filter
Sweep
Principle:
The Q factor of oscillating circuits is
determined from the bandwidth and
by the Pauli method. In inductively
coupled circuits (band-pass filters)
the coupling factor is determined as
a function of the coil spacing.
What you need:

Wobble-functiongenerator 1 Hz-10 MHz
11766.95
11459.95
HF coils, 35 turns; 75 H
06915.00
HF coils, 50 turns, 150 H
06916.00
HF coils, 75 turns, 350 H
06917.00
06520.01
Variable capacitor, Casing G3
06049.10
39104.34
39104.38
1
1
39104.41
Carbon resistor 1 M, 1W, G1
39104.52
Carbon resistor G1, 82 k, 1 W
39104.40
39105.07
39170.00
Connection box
06030.23
G-clamp
02014.00
03001.00
07542.27
07360.02
07542.11
07542.12

P2450200
Coupling constant k as a function of the distance s between the coils when

the coupling is supercritical.
Tasks:
1. To determine the dissipation factor tan k and the quality factor
Q from the bandwidth of oscillating circuits.
2. To determine the dissipation factor and Q factor of oscillating circuits from the resonant frequency
(0), the capacitance Ctot. and the

parallel conductance Gp determined
by the Pauli method.
3. To determine the coupling factor
k and the bandwidth f of a
band-pass filter as a function of
the coil spacing s.
Electricity
Interference of microwaves 4.5.04-00

Wavelength
Standing wave
Reflection
Transmission
Principle:
A microwave beam, after reflection
from a metal screen or glass plate,
interferes with the primary waves.
The wavelength is determined from
the resultant standing waves.
What you need:

Microwave transmitter with clystron
11740.01
Microwave receiver
11740.02
Microwave receiving dipole
11740.03
Microwave power supply, 220 VAC
11740.93
08218.00
Glass plate, clear glass, 200 x 300 x 4 mm
08204.00
08062.00
02062.00
G-clamp
02014.00
03001.00
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
02025.55
02040.55
07034.00
07542.26
07362.01
07362.04

P2450400
Intensity distribution during interference of microwaves in the Michelson

arrangement, as a function of the position of the reflection screens.
Tasks:
Measurement of the wavelength of
microwaves through the production
of standing waves with
1. reflection at the metal screen,
2. plane-parallel plate,
3. the Michelson interferometer.
Electricity
4.5.05-00 Diffraction of microwaves

Fresnel zones
Huygens principle
Diffraction at the slit
Principle:
Microwaves impinge on a slit and
the edge of a screen. The diffraction
pattern is determined on the basis of
diffraction at these obstacles.
What you need:

11740.01
11740.03
11740.93
08062.00
07034.00
09936.00
03001.00
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
02040.55
02025.55
G-clamp
02014.00
07542.26
07361.01
07361.04

P2450500
Intensity distribution in the diffraction of the microwaves at the edge of a

screen, parallel to the plane of the screen.
Tasks:
Determination of the diffraction pattern of the microwave intensity
1. behind the edge of a screen,
2. after passing through a slit,
3. behind a slit of variable width,
with a fixed receiving point.
Electricity
Diffraction and polarization of microwaves 4.5.06-00

Diffraction
Focal point
Linearity
polarized waves
Transverse waves
Polarizer and Analyzer
Constructive and destructive
interference
Principle:
The equivalence between visible light
and microwaves as special cases of
the total spectrum of electromagnetic waves can be demonstrated
using diffraction and polarization of
microwaves as an example. The
focusing of microwaves through a
plane convex convergent lens is
observed and the focal distance of
the lens is determined. After that,
polarizability of microwaves is demonstrated by means of a metallic
grating.
What you need:

U in mV
11740.01
11740.03
11740.93
13626.93
Polarisation grid
06866.00
Convergent lens, synthetic resin
06872.00
08218.00
Voltmeter 0.3...300 V-, 10...300 V~
07035.00
07542.12
07361.01
07361.04
07365.01
07365.04
07542.27
l = 30 cm
150
X
X
X
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
H-base -PASS-
02009.55
Bench clamp -PASS-
02010.00
02025.55
02027.55
02040.55
Stand tube
02060.00
03001.00

Diffraction and polarization of microwaves P2450600
X
X
l = 40 cm
l = 20 cm
without lens
X
X
50
X
X
X
X
X
-8
-7
-6
-5
-4
-3
-2
-1
l = W-So
in cm
Profile of the intensity of radiation.
Tasks:
1. Measuring the irradiance of the
microwave field behind a converging lens
along the optical axis
transversally to the optical axis.
Determination of the focal length of
a synthetic resin converging lens and
comparison of the results with the
with lens
100
distribution of irradiance when no

lens is used.
2. Measurement of the irradiance
transmitted through a metal grating as a function of the angle
between the direction of polarization and the grating bars.
Electricity
4.5.08-00 Radiation field of a horn antenna / Microwaves

Horn antenna
Directional characteristic
pattern
Directivity
Law of distance
Phase center
Principle:
The directional characteristic of a
horn antenna is received in two perpendicular planes by means of a
receiving dipole. The law of distance
for the antenna is verified.
What you need:

11740.01
Microwave receiver
11740.02
11740.93
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
02025.55
02026.55
02028.55
02040.55
02053.01
Graduated disk, for demonstration
02053.02
07128.00
07542.12
07542.27
09936.00

Radiation field of a horn antenna /
Microwaves
P2450800
Umax
1x
x
x
x
r = 20 cm
0,5
r = 60 cm
1 = 45
--4
x
x
x x
60
x x x
30
x x xx x
30
60
= 0
in
Directional characteristic Cu(, = 0) of the horn antenna in the polarization plane for different distances.
Tasks:
1. Measurement of the directional
characteristic of the horn antenna
in two perpendicular planes and
evaluation of the corresponding
directivity from the directional
characteristic.
2. Determination of the microwave
irradiance I as a function of the
distance r between the receiving
dipole and the horn antenna,
which verifies the validity of the
law.
Electricity
Frustrated total reflection / Microwaves 4.5.09-00

Transmission
Reflection
Absorption
Refraction
Phase velocity
Total reflection
Surface waves
Frustrated total reflection
Tunnel effect
Principle:
In the first part, the transmission and
reflection characteristics of glass,
acrylic glass and metal are studied
with a microwave transmitterreceiver pair and are compared to
each other.
In the second part, total reflection of
microwaves on a prismatic surface is
suppressed by bringing a second
prism with the same refractive index
close to the first one.
What you need:

11740.01
Microwave receiver
11740.02
11740.93
08062.00
Glass plate, clear glass, 200 x 300 x 4 mm
08204.00
Plexiglas plate 200 x 200 x 4 mm
11613.00
Barrel base -PASS-
02006.55
02062.00
Supporting block 105 x 10 5x 57 mm
02073.00
Prism, synthetic resin
06873.00
07128.00
07542.11
07542.27
03011.00

P2450900
n1
k1
k2
n2
x
n1
k1
kr
Frustrated total internal reflection.
Tasks:
1. Determination of the reflecting
and transmitting characteristics of
glass, acrylic glass and metal.
2. Observation of the effect of frustrated total reflection and determination of the transmitted irradiance as a function of distance d
to the prismatic surface. The
refractive index of the prism
material can be calculated by
determining the attenuation coefficient
.
Electricity
Handbooks
Demonstration Experiments Physics Electricity / Electronics on the Magnetic Board 1 + 2

Electricity/Electronics on the Magnetic Board 2 No. 01003.02
list Ref. No. 24511
7 Transformation of energy
7.1
(13967)
The transformation of electrical energy
into heat energy
7.2
(13968)
The transform. of electrical energy into
mechanical energy
Electricity/Electronics on the Magnetic Board 1 No. 01001.02

3 Electric Power and Work

list Ref. No. 24510
3.1
(13819)
The Power and work of electric current
4 Capacitors
1 Electric Circuits
1.1
The simple circuit
(13801)
1.2
Measurement of voltage
(13802)
1.3
Measurement of current
(13803)
1.4
(13804)
Conductors and non-conductors
1.5
(13805)
Changeover switches and alternate
switches
1.6
(13806)
Parallel and series connection of voltage
sources
4.1
(13820)
Capacitors in direct current circuits
4.2
The charging and discharging
of a capacitor
(13821)
4.3
(13822)
Capacitors in alternating current circuits
5 Diodes, Part 1
5.1
The diode as electrical valve
(13823)
5.2
The diode as rectifier
(13824)
5.3
(13825)
The characteristic curve of a silicon
diode
1.7
The safety fuse
(13807)
1.8
The bimetallic switch
(13808)
1.9
AND and OR Circuits
(13809)
5.5
(13827)
The characteristic current-voltage curves
of a solar cell
(13810)
5.6
(13828)
Solar cells connected in series and in
parallel characteristic current-voltage
curves and performance
2 Electrical Resistance
2.1
Ohms Law
2.2
(13811)
The resistance of wires dependence on
length and cross-section
2.3
(13812)
The resistance of wires dependence on
material and temperature
2.4
The resistivity of wires
(13813)
5.4
(13826)
Properties of solar cells the dependence on the illuminating intensity
5.7
(13829)
Series and parallel connections of solar
cells characteristic current-voltage
curves and power
5.8
(13830)
The characteristic curve of a germanium

diode
2.5
(13814)
Current strength and resistance
with resist. connec. in parallel
6 Transistors, Part 1
2.6
(13815)
Current strength and resistance
with resist. connec. in series
6.2
(13832)
The transistor as direct current amplifier
2.7
Voltage in a series connection
(13816)
2.8
The potentiometer
(13817)
2.9
(13818)
The internal resistance of a voltage
source
6.1
The npn transistor
(13831)
6.3
(13833)
The characteristic current-voltage curves
of a transistor
6.4
The transistor as a switch
(13834)
6.5
(13835)
The transistor as a time-delay switch
6.6
The p-n-p transistor
(13836)
8 Electrochemistry
8.1
(13969)
The conductivity of electrolytes
8.2
(13970)
Voltage and current strength in
conductive processes in liquids
8.3
(13971)
Electrolysis
8.4
(13972)
Galvanization
8.5
(13973)
Galvanic cells
8.6
(13974)
The lead accumulator
8.7
(13975)
The PEM Electrolyser and PEM Fuel cell
8.8
(13976)
The PEM Solar-hydrogen model
9 Electromagnetism
9.1
(13977)
The magnetic effect of a
current-carrying conductor
9.2
(13978)
Lorentz force: A current-carrying
conductor in a mag. field
9.3
(13979)
The electric bell
9.4
(13980)
A model of an electromagnetic relay
9.5
(13981)
Controlling with a relay
9.6
(13982)
The twilight switch
9.7
(13983)
The galvanometer
9.8
(13984)
The reed switch
10 Electric motors
10.1
The permanent magnet motor
10.2
The main circuit motor
10.3
The shunt motor
10.4
The synchronous motor
(13985)
(13986)
(13987)
(13988)
11 Induction
11.1
(13989)
Induction voltage with a permanent
magnet
11.2
(13990)
Induction voltage with an electromagnet
11.3
(13991)
The alternating current generator
11.4
(13992)
The direct current generator
11.5
(13993)
Lenzsches rule
11.6
(13994)
The behaviour of a direct current
generator under load
12 Transformers
12.1
Voltage transformation
12.2
(13996)
Current transformation
12.3
(13997)
Forces between primary and secondary
coils
12.4
(13998)
The heavy current transformer
13 Self-induction
13.1
(13999)
Self-induction on switching on
13.2
(14000)
Self-induction on switching off
13.3
(14001)
Coils in alternating current circuits
13.4
(14002)
Current strength on switching coils on
and off
14 Safe working with electrical energy
14.1
(14003)
Earthing of the power supply line
14.2
(14004)
The protective conductor system
14.3
(14005)
The protective break transformer
15 Sensors
15.1
(14006)
The NTC resistor
15.2.
(14007)
The PTC resistor
15.3
(14008)
The light dependent resistor (LDR)
16 Diodes, Part 2
16.1
(14009)
The characteristic curve of a Z-diode
16.2
(14010)
The Z-diode as voltage stabilizer
16.3
(14011)
The light emitting diode
16.4
(14012)
The photo diode
16.5
(14013)
The bridge rectifier
16.6
(14014)
The filter network
17 Transistors, Part 2
17.1
(14015)
Voltage amplification of a transistor
17.2
(14016)
Stabilization of the operating point
17.3
(14017)
Transistor control with light
17.4
(14018)
Temperature control of a transistor
17.5
(14019)
Undamped electromagnetic oscillations
17.6
(14020)
Transistors in a digital circuit
17.7
(14021)
The Darlington circuit
17.8
(14022)
How phototransistors function
17.9
(14023)
Information transfer through
a photoconductor
18 The operational amplifier
and applications
18.1
(14024)
The differential amplifier
18.2
(14025)
The digital circuit
18.3
(14026)
The generation of oscillations
(13995)
Physical Structure
of Matter
5
Contents
5.1
5.1.01-00
5.1.02-00
5.1.03-11
5.1.03-15
5.1.04-01/05
5.1.05-01/05
5.1.06-00
5.1.07-00
5.1.08-00
5.1.10-05
5.1.11-01/11
5.1.12-00
5.1.13-00
5.2
5.2.01-01
5.2.01-11
5.2.03-11

Elementary charge and Millikan experiment
Plancks quantum of action from photoelectric effect
Plancks quantum of action from the photoelectric effect
Fine structure, one-electron and two-electron spectra
Balmer series / Determination of Rydbergs constant
Atomic spectra of two-electron systems: He, Hg
Zeeman effect
Stern-Gerlach experiment
5.2.04-00
5.2.20-15
5.2.21-01/11/15
5.2.22-01/11/15
5.2.23-01/11/15
5.2.24-01/11/15
5.2.31-00
5.2.32-00
5.2.41-01/11
5.2.42-01/11/15
5.2.44-01/11/15
5.4.45-01/11/15
5.2.46-01/11/15
5.2.47-01/11/15
Radioactivity
Half-life and radioactive equilibrium with Cobra3
Visualisation of radioactive particles / Diffusion cloud chamber
Alpha-Energies of different sources with Multi Channel Analyzer
Rutherford experiment
Fine structure of the -spectrum of 241Am
Study of the -energies of 226Ra
Energy loss of -particles in gases
Electron absorption
-spectroscopy
Law of distance and absorption of gamma or beta rays
Energy dependence of the -absorption Coefficient
Compton effect
Internal conversion in 137mBa
Photonuclear cross-section / Compton scattering cross-section
X-ray fluorescence and Moseleys law
5.3
5.3.01-01
5.3.01-11
5.3.02-01/11
5.3.03-00
5.3.04-01
5.3.04-11
Solid-state physics
Hall effect in p-germanium
Hall effect in n-germanium
Hall effect in metals
Band gap of germanium
Band gap of germanium with Cobra3
5.4
5.4.01-00
5.4.02-00
5.4.03-00
5.4.04-00
5.4.05-00
5.4.06-00
5.4.07-00
5.4.08-00
5.4.09-00
5.4.10-00
5.4.11-00
5.4.12-00
5.4.13-00
5.4.14/15-00
5.4.16-00
5.4.17-00
5.4.18-00
5.4.19-00
5.4.20-00
5.4.21-00
5.4.22-00
5.4.23-00
5.4.24-00
5.4.25-00
5.4.26-00
5.4.27-00
6.4
X-ray Physics
Characteristic X-rays of copper
Characteristic X-rays of molybdenum
The intensity of characteristic X-rays as a function of anode
current and anode voltage
Monochromatization of molybdenum X-rays
Monochromatization of copper X-rays
K doublet splitting of molybdenum X-rays / fine structure
K doublet splitting of iron X-rays / fine structure
Duane-Hunt displacement law and Planck's quantum of action
Characteristic X-ray lines of different anode materials /
Moseley's Law; Rydberg frequency and screening constant
K- and L-absorption edges of X-rays /
Moseley's Law and the Rydberg constant
Examination of the structure of NaCl monocrystals with different orientations
X-ray investigation of different crystal structures /
Debye-Scherrer powder method
X-ray investigation of crystal structures / Laue method
X-ray dosimetry
Contrast medium experiment with a blood vessel model
Determination of the length and position of an object which
cannot be seen
with the three cubic Bravais lattices
with diamond structure (germanium and silicon)
with a hexagonal lattice structure
with a tetragonal lattice structure
with a cubic powder sample
Diffractometric measurements to determine the intensity of
Debye-Scherrer reflexes using a cubic lattice powder sample
Diffractometric Debye-Scherrer measurements
for the examination of the texture of rolled sheets
Handbooks
X-Ray Experiments
Interface-System Cobra3 Physics, Chemistry/Biology
Elementary charge and Millikan experiment 5.1.01-00

Electric field
Viscosity
Stokes law
Droplet method
Electron charge
Principle:
Charged oil droplets subjected to an
electric field and to gravity between
the plates of a capacitor are accelerated by application of a voltage. The
elementary charge is determined
from the velocities in the direction of
gravity and in the opposite direction.
What you need:

1,20E-18
09070.00
Multi-range meter, 0.24...600 VCD
07021.01
13672.93
Object micrometer 1mm i.100 parts
62171.19
03076.01
Cover glasses, 18 x 18 mm, pack of 50 pcs.
64685.00
Commutator switch
06034.03
Tripod base -PASS-
02002.55
Stand tube
02060.00
07360.05
07362.01
07362.04
07362.05
Radioactive source, Am-241, 74 kBq
09047.5 1
Circular level
02 122.00
FlexCam Scientific Pro II
88030.93
Optional accessories:
TV set

Elementary charge and Millikan experiment P2510100
1,00E-18
8,00E-19
Q/As
Millikan apparatus
6,00E-19
4,00E-19
2,00E-19
0,00E+00
0,00E+00
2,00E-07
4,00E-07
6,00E-07
r/m
8,00E-07
1,00E-07
1,20E-07
Measurements on various droplets for determining the elementary charge by

the Millikan method.
Tasks:
1. Measurement of the rise and fall
times of oil droplets with various
charges at different voltages.
2. Determination of the radii and the
charge of the droplets.
5.1.02-00 Specific charge of the electron e/m

Cathode rays
Lorentz force
Electron in crossed fields
Electron mass
Electron charge
Principle:
Electrons are accelerated in an
electric field and enter a magnetic
field at right angles to the direction
of motion. The specific charge of the
electron is determined from the
accelerating voltage, the magnetic
field strength and the radius of the
electron orbit.
What you need:

Narrow beam tube with socket
06959.00
06960.00
13672.93
13500.93
07128.00
07359.01
07359.04
07362.01
07362.04
07362.02

P2510200
Tasks:
Determination of the specific charge
of the electron (e/m0) from the path
of an electron beam in crossed
electric and magnetic fields of variable strength.
Franck-Hertz experiment with Hg-tube 5.1.03-11

Energy quantum
Electron collision
Excitation energy
Principle:
Electrons are accelerated in a tube
filled with mercury vapour.
The excitation energy of mercury is
determined from the distance between the equidistant minima of the
electron current in a variable opposing electric field.
What you need:

Franck-Hertz control unit
09105.99
Franck-Hertz Hg-tube on plate
09105.10
Franck-Hertz oven for Hg-tube
09105.93
Thermocouple NiCr-Ni, sheathed
13615.01
Connecting cable for Franck-Hertz Hg-tube
09105.30
07542.11
14602.00
Software Measure Franck-Hertz experiment
14522.61
Oscilloscope, 30 MHz, 2 channels
11459.95
Adapter, BNC-socket/4mm plug pair
07542.27
07542.11

Optional equipment:
Example of a Franck-Hertz curve for Hg-gas recorded with T = 180C.

P2510311
Tasks:
1. Record the counter current
strength Is in a Franck-Hertz tube
as a function of the anode voltage
Ua.
2. To determine the excitation energy Ea from the positions of the
current strength minima or maxima by difference formation.
5.1.03-15 Franck-Hertz experiment with Ne-tube

Energy quantum
Quantum leap
Electron collision
Excitation energy
Principle:
Electrons are accelerated in a tube
filled with neon vapour.
The excitation energy of neon is determined from the distance between
the equidistant minima of the electron current in a variable opposing
electric field.
What you need:

Franck-Hertz control unit
09105.99
Franck-Hertz Ne-tube with housing
09105.40
Connecting cable for Franck-Hertz Ne-tube
09105.50
07542.11
14602.00
Software Measure Franck-Hertz experiment
14522.61
Oscilloscope, 30 MHz, 2 channels
11459.95
Adapter, BNC-socket/4mm plug pair
07542.27
07542.11

Optional equipment:

P2510315
Example of a Franck-Hertz curve for Ne-gas.
Tasks:
1. Record the counter current
strength Is in a Franck-Hertz tube
as a function of the anode voltage
Ua.
2. To determine the excitation energy Ea from the positions of the
current strength minima or maxima by difference formation.
5.1.04-01/05

External photoelectric effect
Work function
Absorption
Photon energy
Anode
Cathode
Principle:
A photo-cell is illuminated with light
of different wavelengths. Plancks
quantum of action, or Plancks constant (h), is determined from the
photoelectric voltages measured.
Set-up of experiment P2510405 with electrometer
What you need:

Experiment P2510405 with electrometer
Photocell, for h detection, with housing
06778.00
08461.00
08463.00
Experiment lamp 6
11615.05
08120.14
13662.97
13626.93
07128.00
07542.10
07360.01
07360.04
13621.00
07542.27
1
1
11074.93

Plancks quantum of action from the photoelectric
P25104 01/05
effect (line separation by interference filters)
Voltage of the photo-cell as a function of the frequency of the irradiated

light.
Tasks:
To determine Plancks quantum of
action from the photoelectric voltages measured at different wavelengths.

5.1.05-01/05

External photoelectric effect
Work function
Adsorption
Photon energy
Principle:
A photocell is illuminated with
monochromatic light of different
wavelengths. Plancks quantum of
action, or Plancks constant h, is
determined from the photoelectric
voltages measured.
Set-up of experiment P2510501 with amplifier
What you need:

Experiment P2510505 with electrometer
Photocell, for h detection, with housing
06778.00
08546.00
08415.00
08414.00
Diaphragm holder, attachable
11604.09
Slit, adjustable
08049.00
Lens holder
08012.00
08021.01
08147.00
07542.10
07360.01
07360.04
Lamp socket E 27 on stem
06176.00
13662.97
13626.93
07128.00
1
2
08283.00
08284.00
Turning knuckle for optical profile bench
08285.00
08286.02
13621.00
07542.27
11074.93
Voltage of the photo-cell as a function of the frequency of the irradiated

light.

Plancks quantum of action from the photoelectric
effect (line separation by defraction grating)
P25105 01/05
Fine structure, one-electron and two-electron spectra 5.1.06-00

Diffraction spectrometer
Spin
Angular momentum
Spin-orbital angular
momentum interaction
Multiplicity
Energy level
Excitation energy
Selection rules
Doublets
Parahelium
Orthohelium
Exchange energy
Angular momentum
Singlet and triplet series
Selection rules
Forbidden transition
Principle:
The well-known spectral lines of He
are used for calibrating the diffraction spectrometer. The wave-lengths
of the spectral lines of Na, Hg, Cd
and Zn are determined using the
spectrometer.
What you need:

Spectrometer/goniometer with verniers
35635.02
08546.00
Spectral lamp He, pico 9 base
08120.03
Spectral lamp Na, pico 9 base
08120.07
08120.14
Spectral lamp Cd, pico 9 base
08120.01
Spectral lamp Zn, pico 9 base
08120.11
13662.97
08119.00
Tripod base -PASS-
02002.55

Fine structure, one-electron
and two-electron spectra
P2510600
Tasks:
1. Calibration of the spectrometer
using the He spectrum, and the
determination of the constant of
the grating;
2. Determination of the spectrum of
Na;
3. Determination of the fine structure splitting.
Spectrum of sodium.
4. Determination of the most intense

spectral lines of Hg, Cd and Zn.
5.1.07-00 Balmer series / Determination of Rydbergs constant

Diffraction image of a
diffraction grating
Visible spectral range
Single electron atom
Atomic model according
to Bohr
Lyman-, Paschen-, Brackettand Pfund-Series
Energy level
Plancks constant
Binding energy
Principle:
The spectral lines of hydrogen and
mercury are examined by means of a
diffraction grating. The known spectral lines of Hg are used to determine
the grating constant. The wave
lengths of the visible lines of the
Balmer series of H are measured.
What you need:
eV
Spectral tube, Hg
06664.00
Holders for spectral tubes, 1 pair
06674.00
Cover tube for spectral tubes
06675.00
07367.00
08041.00
08546.00
13670.93
Insulating support
06020.00
Tripod base -PASS-
02002.55
Barrel base -PASS-
02006.55
02026.55
02040.55
Stand tube
02060.00
03001.00
02201.00
09936.00

Balmer series /
Determination of Rydbergs constant
P2510700
n=
0.9
BrackettSeries
1.5
H PaschenSeries
H
n=4
n=3
H
H
H
3.4
13.6
n=2
BalmerSeries
ionization energy 13.6 eV
06665.00
energy level
Spectral tube, H2
n=1
LymanSeries
Energy level diagram of the H atom.
Tasks:
1. Determination of the diffraction
grating constant by means of the
Hg spectrum.
2. Determination of the visible lines
of the Balmer series in the H spectrum, of Rydbergs constant and of
the energy levels.
Atomic spectra of two-electron systems: He, Hg 5.1.08-00

Parahelium
Orthohelium
Exchange energy
Spin
Angular momentum
Spinorbit interaction
Multiplicity
Rydberg series
Selection rules
Metastable state
Energy level
Excitation energy
Principle:
The spectral lines of He and Hg are
examined by means of a diffraction
grating. The wavelengths of the lines
are determined from the geometrical
arrangement and the diffraction
grating constants.
What you need:

Spectral tube, Hg
06664.00
Spectral tube, He
06668.00
Holders for spectral tubes, 1 pair
06674.00
Cover tube for spectral tubes
06675.00
07367.00
08041.00
08546.00
Colour
/nm
Transition
red
665 2
3 1D R 2 1P
yellow-orange
586 2
3 3D R 2 3P
green
501 2
3 1D R 2 1P
blue-green
490 2
4 1D R 2 1P
blue
470 3
4 3S R 2 3P
violet
445 1
4 3D R 2 3P
Transition
13670.93
Insulating support
06020.00
Colour
/nm
Tripod base -PASS-
02002.55
yellow
581 1
Barrel base -PASS-
02006.55
02026.55
green
550 1
7 S1 R 6 3P1
02040.55
green
494 2
8 1S1 R 6 1P1
Stand tube
02060.00
blue
437 2
7 1S R 6 1P1
03001.00
02201.00
09936.00

Atomic spectra of two-electron
systems: He, Hg
P2510800
R 6 P1
{ 66 D1
D1 R 6 P1
3
Measured spectral lines of He/Hg and the corresponding energy-level transitions.
Tasks:
1. Determination of the wavelengths
of the most intense spectral lines
of He.
2. Determination of the wavelengths
of the most intense spectral lines
of Hg.
5.1.10-05 Zeeman effect / normal and anomalous version

Bohrs atomic model
Quantisation of energy levels
Electron spin
Bohrs magneton
Interference of
electromagnetic waves
Principle:
The Zeeman effect is the splitting
of the spectral lines of atoms within
a magnetic field. The simplest is the
splitting up of one spectral line into
three components called normal
Zeeman effect. Usualy the phenomenon is more complex and the
central line splits into many more
components. This is the anomalous
Zeeman effect. Both effects can be
studied using a cadmium lamp as a
specimen. The cadmium lamp is submitted to different magnetic flux
densities and the splitting of the red
cadmium line (normal Zeeman effect)
and that of a green cadmium line
What you need:

Cadmium lamp for Zeeman effect
Electromagnet without pole shoes
Pole pieces, drilled, conical, 1 pair
Rotating table for heavy loads
Variable transformer 25 V~/20 V- , 12 A
Electrolyte capacitor, 22000 F
Lens holder
Iris diaphragm
Polarisation specimen, mica
CCD-camera for PC-use, USB*
09050.02
09050.01
06480.01
06480.03
02077.00
13662.97
13531.93
06211.00
07128.00
08282.00
08284.00
08286.01
08286.02
08012.00
08020.01
08023.01
08045.00
08610.00
08664.00
07360.01
07360.04
07361.01
07361.04
07362.01
07363.01
07363.04
88037.00
1
1
1
1
1
1
1
1
1
1
2
5
2
4
2
1
1
1
1
1
1
1
1
1
1
1
1
Interference rings with the anomalous Zeeman effect.
(anomalous Zeeman effect) is investigated using a Fabry-Perot interferometer. The evaluation of the results
leads to a fairly precise value for
Bohrs magneton.
Tasks:
1. Using the Fabry-Perot interferometer and a self made telescope
the splitting up of the central lines
into different lines is measured in
wave numbers as a function of the
magnetic flux density.
2. From the results of point 1. a value
for Bohrs magneton is evaluated.
3. The light emitted within the
direction of the magnetic field is
qualitatively investigated.
PC with USB interface, Windows 98SE/Windows Me/

Windows 2000/Windows XP
*Alternative to CCD-Camera incl. measurement software, two slide mounts,
h = 80 mm for classical version of the Zeeman Effect:
Slide mount for optical profile-bench,
08286.00 1
08713.00 1
Swinging arm
08256.00 1
Plate holder with tension spring

Screen, with aperture and scale
Slide mount for opt. profile-bench, h = 80 mm
08288.00
08340.00
08286.02
1
1
1

Zeeman effect / normal and anomalous version P2511005
5.1.11-01/11

Magnetic moment
Bohr magneton
Directional quantization
g-factor
Electron spin
Atomic beam
Maxwellian velocity
distribution
Two-wire field
Principle:
A beam of potassium atoms generated in a hot furnace travels along a
specific path in a magnetic two-wire
field. Because of the magnetic moment of the potassium atoms, the
nonhomogeneity of the field applies
a force at right angles to the direction of their motion. The potassium
atoms are thereby deflected from
their path.
Set-up of experiment P2511111 with PC interface
By measuring the density of the

beam of particles in a plane of detection lying behind the magnetic
What you need:

Experiment P2511111 with PC interface
Experiment P2511101 classical
Stern-Gerlach apparatus
Matching transformer
Potassium ampoules, set of 6
High vacuum pump assembly, compact
Electromagnet without pole shoes
Pole piece, plane
Commutator switch
Voltmeter 0.3...300 V-, 10...300 V~
Ammeter, 1 mA...3 A DC/AC
Meter 10/30 mV, 200C
Storage tray, 413 x 240 x 100 mm
Crystallizing dishes, BORO 3.3., 2300 ml
Isopropyl alcohol, 1000 ml
Direct current measuring amplifier
Two tier platform support
Connect. cable, 4 mm plug, 32 A, green-yellow, l = 50 cm
Gas-cylinder Trolley for 10 l
Step motor Stern-Gerlach appartus
Step motor unit
Data cable USB, plug type A/B, l = 1.8 m
Software for stepping motor
Adapter, BNC-socket/4 mm plug pair
09054.88
09054.04
09054.05
09059.99
06480.01
06480.02
06034.03
07035.00
07036.00
07019.00
47325.02
46246.00
30092.70
13620.93
13530.93
13505.93
02076.03
39286.00
07360.02
07360.04
07361.01
07361.04
07361.15
07362.01
07362.02
41763.00
33483.00
41790.10
09054.06
08087.99
14608.00
14451.61
07542.27
07542.12
1
1
1
1
1
2
1
2
2
1
1
1
1
1
1
2
1
3
2
2
3
2
1
1
3
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
2
1
3
2
2
2
1
1
1
3
1
1
1
1
1
1
1
1
1

P25111 01/11
Ionization current as a function of position (u) of detector with large excitation currents in the magnetic analyser.
field, it is possible to draw conclusions as to the magnitude and direction of the magnetic moment of the
potassium atoms.
Tasks:
1. Recording the distribution of the
particle beam density in the detection plane in the absence of the
effective magnetic field.
mentally determined special distribution of the particle beam density.

3. Determining the dependence of
the particle beam density in the
detection plane with different values of the non-homogeneity of
the effective magnetic field.
4. Investigating the positions of the
maxima of the particle beam density as a function of the non-homogeneity of the magnetic field.
2. Fitting a curve consisting of a

straight line, a parabola, and another straight line, to the experiLaboratory Experiments Physics 211
5.1.12-00 Electron spin resonance

Zeeman effect
Energy quantum
Quantum number
Resonance
g-factor
Land factor
Principle:
The g-factor of a DPPH (Diphenylpikrylhydrazyl) and the half-width of
the absorption line are determined,
using the ESR apparatus.
What you need:

ESR resonator with field coils
09050.00
ESR power supply
09050.93
13500.93
11459.95
Digital Mulitmeter 2010
07128.00
07542.11
07542.27
07361.04
07361.01
07361.02
Teslameter, digital
13610.93
Hall probe, tangential, protective cap
13610.02
Options:

P2511200
Electron spin resonance (ESR), model experiment.
Tasks:
With ESR on a DPPH specimen determination of
1. the g-factor of the free electron,
and
2. the half-width of the absorption
line.
Electron diffraction 5.1.13-00

Bragg reflection
Debye-Scherrer method
Lattice planes
Graphite structure
Material waves
De Broglie equation
Principle:
Fast electrons are diffracted from a
polycrystalline layer of graphite: interference rings appear on a fluorescent screen. The interplanar spacing
in graphite is determined from the
diameter of the rings and the accelerating voltage.
What you need:

Electron diffraction tube on mounting
06721.00
13670.93
07160.00
07366.00
13672.93
03011.00
07360.01
07360.04
07362.01
07362.02
07362.04
07362.05

P2511300
Tasks:
1. To measure the diameter of the
two smallest diffraction rings at
different anode voltages.
2. To calculate the wavelength of the
electrons from the anode voltages.
3. To determine the interplanar spacing of graphite from the relationship between the radius of the
diffraction rings and the wavelength.
Radioactivity
5.2.01-01 Half-life and radioactive equilibrium

Parent substance
Daughter substance
Rate of decay
Disintegration or decay
constant
Counting rate
Half life
Disintegration product
Principle:
The half-life of a Ba-137 m daughter
substance eluted (washed) out of a
Ca-137 isotope generator is measured directly and is also determined
from the increase in activity after
elution.
What you need:

Isotope generator Cs-137/ Ba, 370 kBq
09047.60
Pulse rate meter
13622.93
07128.00
Counter tube, type A, BNC
09025.11
03071.01
Aluminium, sheet, 1 x 20 x 200 mm, 5 pcs.
31074.00
Tripod base -PASS-
02002.55
02025.55
02040.55
Universal clamp
37718.00
36013.00
Test tube, AR-glass, d = 16 mm
37656.10
07542.11
07361.01
07361.04

Half-line and radioactive equilibrium
P2520101
Logarithmic plot of the counting rate of the eluted daughter substance as a

function of time.
Tasks:
1. To record the counting rate as a
function of the counter tube voltage (counter tube characteristic)
when the isotope generator activity is constant (radioactive equilibrium).
2. To measure the activity of the isotope generator as a function of

time immediately after elution.
3. To measure the activity of a freshly eluted solution of Ba-137 m as
a function of time.
Radioactivity
Half-life and radioactive equilibrium with Cobra3 5.2.01-11

Parent substance
Daughter substance
Rate of decay
Disintegration or decay
constant
Counting rate
Half life
Principle:
The half-life of a Ba-137 m daughter
substance eluted (washed) out of a
Ca-137 isotope generator is measured directly and is also determined
from the increase in activity after
elution.
What you need:

Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14602.00
Software Cobra3 Radioactivity
14506.61
Cobra3 measuring Module GM counting tube
12106.00
Base plate for radioactivity
09200.00
Counter tube holder on fixing magnet
09201.00
Plate holder on fixing magnet
09203.00
Source holder on fixing magnet
09202.00
09025.11
07542.11
Test tube, FIOLAX, d = 12 mm
36307.10
Rubber stopper, d = 14.5/10.5 mm, without hole
39253.00
Isotope generator Cs-137/ Ba, 370 kBq
09047.60
Logarithmic plot of the counting rate of Ba-137ms decay; counting rate as a

function of time, with the regression line.

with Cobra3
P2520111
Tasks:
1. To record the counting rate as a
function of the counter tube voltage (counter tube characteristic)
when the isotope generator activity is constant (radioactive equilibrium).
2. To measure the activity of the isotope generator as a function of
time immediately after elution.
3. To measure the activity of a freshly eluted solution of Ba-137 m as
a function of time.
Radioactivity
5.2.03-11 Poissons distribution and Gaussian distribution of radioactive decay with Cobra3
Poissons distribution
Gaussian distribution
Standard deviation
Expected value of pulse rate
Different symmetries of
distributions
Dead time
Recovering time and
resolution time of a counter
tube
Principle:
1) The aim of this experiment is to
show that the number of pulses
counted during identical time intervals by a counter tube which bears a
fixed distance to a long-lived radiation emitter correspond to a Poissons distribution. A special characteristic of the Poissons distribution
can be observed in the case of a
small number of counts n < 20: The
distribution is unsymmetrical, i. e.
the maximum can be found among
What you need:

09025.11
07542.11
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14506.61
14602.00
Cobra3 measuring Module GM counting tube
12106.00
09200.00
09201.00
09202.00
09203.00
Americium-241 source, 370 kBq
09090.11
Pulse rate distribution for high pulse rate (248 pulses/s) with an adapted
Gaussian curve (left window) and a Poissons curve (right window).

Influence of the dead time of the counter tube P2520311
smaller numbers of pulses than the

mean value. In order to show this
unsymmetry the experiment is carried out with a short counting period
and a sufficiently large gap between
the emitter and the counter tube so
that the average number of pulses
counted becomes sufficiently small.
2) Not only the Poissons distribution,
but also the Guassian distribution
which is always symmetrical is very
suitable to approximate the pulse
distribution measured by means of a
long-lived radiation emitter and a
counter tube arranged with a constant gap between each other. A

premise for this is a sufficiently high
number of pulses and a large sampling size.
The purpose of the following experiment is to confirm these facts and to
show that the statistical pulse distribution can even be be approximated
by a Guassian distribution, when
(due to the dead time of the counter
tube) counting errors occur leading
to a distribution which deviates from
the Poissons distribution.
3) If the dead time of the counter

tube is no longer small with regard
to the average time interval between
the counter tube pulses, the fluctuation of the pulses is smaller than in
the case of a Poissons distribution.
In order to demonstrate these facts
the limiting value of the mean value
(expected value) is compared to the
limiting value of the variance by
means of a sufficiently large sampling size.
Radioactivity
Visualisation of radioactive particles / Diffusion cloud chamber 5.2.04-00

, , -particles
deflection
Ionising particles
Mesons
Cosmic radiation
Radioactive decay
Decay series
Particle velocity
Lorentz force
Principle:
Radioactivity is a subject in our society which has been playing an
important role throughout politics,
economy and media for many years
now. The fact that this radiation cannot be seen or felt by the human
being and that the effects of this
radiation are still not fully explored
yet, causes emotions like no other
scientific subject before.
The high-performance diffusion
cloud chamber serves for making the
What you need:

Diffusion cloud chamber PJ45, 230 V
09046.93
Isopropyl alcohol, 1000 ml
30092.70
Thorium-source
09043.41
Radioactive source, Sr-90, 74kBq
09047.53
Support base -PASS-
02005.55
Swinging arm
08256.00
02031.00
02040.55
08041.00
Holder for dynamometer
03068.04
Scale for demonstration board
02153.00
Accessory set for Beta deflection
09043.52
Stand tube
02060.00

Visualisation of radioactive particles /
Diffusion cloud chamber
P2520400
Experimental set-up: deflection of -particles.
tracks of cosmic and terrestrial radiation visible so that a wide range of

natural radiation types can be identified. Furthermore, the diffusion
cloud chamber offers the opportunity to carry out physical experiments with the aid of artificial radiation sources.
Tasks:
1. Determination of the amount of
background radiation
2. Visualisation of , , -particles
and mesons
3. Visualisation of the Thorium
(Radon) decay
4. Deflection of --particles in a
magnetic field
Radioactivity
5.2.20-15 Alpha-Energies of different sources with Multi Channel Analyzer

Decay series
Radioactive equilibrium
Isotopic properties
Decay energy
Particle energy
Potential well model of the
atomic nucleus
Tunnel effect
Geiger-Nuttal law
Semiconductor
Barrier layer
Principle:
An Alpha-spectrometer, consisting of
a photodetector, a preamplifier, a
pulse height analyser and a recording device for registration of the
spectra is calibrated by means of an
open Alpha-emitter of known Alphaenergy (241Am). The energy spectrum
of a radium source which is in equilibrium with its decay products, is
recorded and evaluated. The AlphaEnergies found in this way are allocated to the corresponding nuclides
of the radium decay series.
What you need:

Multi-Channel-Analyzer
13726.99
Software Multi-Channel-Analyzer
14452.61
Americium-241 source, 3.7 kBq
09090.03
Radioactive Source Ra-226, 4 kBq
09041.00
Alpha- and Photodetector
09099.00
Pre-amplifier for alpha detector
09100.10
09200.00
09202.00
Cable connector BNC, 75
07542.09
07542.11
14602.00

Alpha-Energies of different sources
with Multi Channel Analyzer
P2522015
Alpha-spectrum of the 226Ra.
Tasks:
1. The Alpha-spectrum of the 226Ra
is recorded with Multi Channal
Analyzer
2. The calibration spectrum of the
open 241Am Alpha-emitter is
recorded at the same settings.
3. The Alpha-energies corresponding
to the individual peaks of the
Alpha-spectrum of the radium are
calculated and compared to the
values in the literature.
Radioactivity
5.2.21-01/11/15

Scattering
Angle of scattering
Impact parameter
Central force
Coulomb field
Coulomb forces
Rutherford atomic model
Identity of atomic number
and charge on the nucleus
Principle:
The relationship between the angle
of scattering and the rate of scattering of -particles by gold foil is
examined with a semiconductor
detector. This detector has a detection probability of 1 for -particles
and virtually no zero effect, so that
the number of pulses agrees exactly
with the number of -particles striking the detector.
Set-up of experiment P2522115 with MCA
In order to obtain maximum possible

counting rates, a measurement
geometry is used which dates back
What you need:

Experiment P2522115 with MCA
Experiment P2522101 with digital counter
Alpha- and Photodetector*
Annular diaphragm with gold foil
Annular diaphragm with aluminium foil
U-magnet, large
Container for nuclear physics experiments
Pulse height analyser
Pressure sensor, 1.0...1300 hPa
Diaphragm pump, two stage, 220V
Tubing connect.,Y-shape, d = 8-9 mm
Cobra3 BASIC-UNIT
Power supply 12V/2A
* Alternatively:
Alpha detector
13726.99
14452.61
09099.00
09103.02
09103.03
06320.00
09090.11
09103.00
09100.10
13725.93
13600.93
07136.00
07136.01
08163.93
39286.00
47518.03
11459.95
43631.20
07542.11
07542.27
07362.01
07362.04
14602.00
12150.00
14506.61
12151.99
09100.00
07542.09
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
4
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
4
1
2
2
1
1
1
1
1
3
1
1
1
1

P25221 01/11/15
Counting rate for gold as a function of
to Chadwick. It is also possible in this

case to shift the foil and source in an
axial direction (thus deviating from
Chadwicks original apparatus), so
that the angle of scattering can be
varied over a wide range.
In addition to the annular diaphragm
with gold foil, a second diaphragm
with aluminium foil is provided in
order to study the influence of the
scattering material on the scattering
rate.
(2r )2 sin4(2)
Tasks:
1. The particle rates are measured at
different angles of scattering
between about 20 and 90 . The
measurements are compared with
the particle rates calculated by
means of the Rutherford theory
for the measurement geometry
used.
2. The particle rates are measured in
the case of scattering by aluminium and gold with identical angles
of scattering in each case. The
ratio of the two particle rates is
compared with the particle rate
calculated from Rutherfords scattering equation.

5.2.22-01/11/15
Radioactivity
Fine structure of the -spectrum of
241
Am
Energy level diagram (decay
diagram)
Transition probability
Excited nuclear states
-emission
Connection between the fine
structure of the -spectrum
and the accompanying
-spectrum
Principle:
The -spectrum of an open 241Amemitter is measured with a semiconductor -detector, maximum use
being made in this case of the resolution capacity of the pulse height
analyzer. Use is made for this purpose of the Zoom function, which
is an additional amplification stage
having in the effect that only that
proportion of the pulses exceeding
the threshold voltage of 5 V undergoes further processing. The pulse
peaks above this threshold are
amplified 5 times and restricted to a
maximum of 10 V.
What you need:

Experiment P2522201 with xyt recorder
XYt recorder
Cobra3 BASIC-UNIT
Power supply 12V/2A
* Alternatively:
Alpha detector
13726.99
14452.61
09099.00
09090.03
09103.00
09100.10
13725.93
11416.97
07136.00
07136.01
08163.93
39286.00
47518.03
11459.95
43631.20
07542.11
07362.01
07362.04
14602.00
12150.00
14504.61
12151.99
09100.00
07542.09
1
1
1
1
1
1
1
1
1
3
1
1
1
4
2
2
1
1
1
1
1
1
1
1
1
3
1
1
1
4
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
3
1
1
Measured Alpha-spectrum of Am-241.
Tasks:
1. The spectrum of an open 241Amemitter is recorded with the xytrecorder at the maximum resolution capacity of the measurement
layout, using automatic window
movement. The energy of the two
peaks preceding the principal peak
is calculated. The principal peak,
corresponding to a particle energy
of 5.486 MeV, is used for calibration purposes.
2. The resolution capacity of the

measurement layout is measured
from the half-life width of the
principal peak.

Fine structure of the -spectrum
P25222 01/11/15
of 241Am
Radioactivity
Study of the -energies of
226
Ra
5.2.23-01/11/15

Decay series
Isotopic properties
Decay energy
Particle energy
Potential well model of the
atomic nucleus
Tunnel effect
Geiger-Nuttal law
Semiconductor
Barrier layer
Principle:
An -spectrometer, consisting of a
silicon surface barrier layer detector,
a preamplifier, a pulse height analyzer and a recording device for registration of the spectra is calibrated by
means of an open -emitter of
known -energy (241Am).
The energy spectrum of a radium
source which is in equilibrium with
its decay products, is recorded and
What you need:

Adaptor for radioactive sources
Radioactive Source Ra-226, 4 kBq
XYt recorder
Cobra3 BASIC-UNIT
Power supply 12V/2A
13726.99
14452.61
09099.00
09090.03
09043.29
09041.00
09103.00
09100.10
13725.93
11416.97
07136.00
07136.01
08163.93
39286.00
47518.03
11459.95
43631.20
07542.11
07362.01
07362.04
14602.00
12150.00
14504.61
12151.99
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
4
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
4
2
2
1
1
1
1
1
1
1
3
1
226
1
4
evaluated. The -energies found in

this way are allocated to the corresponding nuclides of the radium
decay series.
1
1
1
1
1. The -spectrum of the 226Ra is

recorded, the settings of the pulse
analyzer (amplification) and
recorder (x and y input sensitivity)
being selected so as to make best
possible use of the recording
width.

Study of the -energies of 226Ra
P25223 01/11/15
2. The calibration spectrum of the

open 241Am-emitter is recorded at
the same settings.
* Alternatively:
Alpha detector
09100.00
07542.09
1
1
Ra pulse rate dependence of pulse height.
Tasks:
3. The -energies corresponding to

the individual peaks of the spectrum of the radium are calculated and, on the assumption of a
constant energy loss in the source
covering, the -active nuclides of
the radium decay series corresponding to the individual peaks
are determined on the basis of the
values in the literature.
LEP_5_1
12.09.2006
22:19 Uhr
Seite 222

5.2.24-01/11/15
Radioactivity
Set-up of experiment P2522401 with xyt recorder

Range
Range dispersion
Mean free path length
Mean ionization energy of
gas atoms
Mean energy loss of
-particles per collision
Differencial energy loss
Bethe formula
Electron concentration in
gases
Principle:
A study is made of the connection
between the energy E of -particles
and the path x travelled by them in
air at standard pressure. The measurements recorded enable the differencial energy loss dE/dx to be calculated as a function of x.
What you need:

XYt recorder
Glass stopcocks, 3 way, T-shaped
Fine control valve for pressure bottles
Compressed gas, helium, 12 l
Compressed gas, nitrogen, 12 l
Compressed gas, CO2, 21 g
Cobra3 BASIC-UNIT
Power supply 12V/2A
13726.99
14452.61
09099.00
09090.03
09090.11
09103.00
09100.10
13725.93
11416.97
07136.00
07136.01
08163.93
39286.00
47518.03
11459.95
43631.20
36731.00
33499.00
41772.03
41772.04
41772.06
07542.11
07362.01
07362.04
14602.00
12150.00
14504.61
12151.99
* Alternatively:
Alpha detector
09100.00
07542.09
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
4
2
2
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
1
4
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
1
1
3
1
1

P25224 01/11/15
Influence of the type of gas on the energy loss of -particles.
Tasks:
1. The spectrum of a covered 241Am
source is measured at a fixed distance s as a function of the pressure p. The distance s is selected
in such a way as to correspond to
the maximum range at the highest
pressure measurable with the
manometer used. The energy corresponding to the central points of
the individual spectra are determined (after calibration of the
measurement layout with an open
241
Am-emitter, see 3.) and plotted
as a function of the distance x
converted to a 1013 hPa basis.
Using this function, the differential energy loss ( dE/dx) is then
calculated as a function of x and
again plotted on the graph.
2. The spectrum of the source used

in 1. is measured initially under
the same geometric conditions
under vacuum and subsequently
with the vessel filled with helium,
nitrogen or carbon dioxide, in
each case under identical pressures. The different energy loss
values are compared with the
electron concentration in the particluar gas.
3. The mean energy with which the
-particles leave the covered
americium source is determined
by calibration against the open
americium emitter (E = 5.485
MeV). (This value is required for
the evaluation in 1.)
Radioactivity
Electron absorption 5.2.31-00

Density
Counter tube
Radioactive decay
Attenuation coefficient
Mass coverage
Principle:
The attenuation of an electron particle stream passing through a material layer depends both on the thickness of the layer and on the mass
coverage, resp. the mass per unit
area. It will be shown that the particle flux consisting of electrons of a
particular energy distribution decreases with the mass per unit area.
As electron source, a radioactive
sample of Sr90 is used.
What you need:

09047.53
Geiger-Mller Counter
13606.99
09025.11
07542.11
03071.01
09200.00
Supports for base 09200.00, 2 pcs.
09200.01
09201.00
09203.00
09202.00
03010.00
Absorption plates for beta-rays
09024.00
Cover glasses, 40 x 22 mm, 50 pcs.
64688.00

Electron absorption
P2523100
Counting rate I as a function of absorber thickness.
Tasks:
1. The -counting rates are measured as a function of the absorber
thickness using different absorbing materials such as aluminium
(AL), glass (GL), hard paper (HP),
and typing paper (TP).
2. The attenuation coefficients are

evaluated for the four absorbing
materials and plotted as a function of the density.
Radioactivity
5.2.32-00 -spectroscopy
-decay
+-decay
Electron capture
Neutrino
Positron
Decay diagram
Decay energy
Resting energy
Relativistic Lorentz equation
Principle:
The radiation of -unstable atomic
nuclei is selected on the basis of its
pulses in a magnetic transverse field,
using a diaphragm system. The relationship between coil current and
particle energy is determined for calibration of the spectrometer and the
decay energy of the -transition is
obtained in each case from the
-spectra.
What you need:

Beta-spectroscope
09104.00
Iron core, solid, 25 mm long
06490.01
06500.00
06501.00
Clamping device
06506.00
Coil, 600 turns
06514.01
Radioactive source, Na-22, 74kBq
09047.52
09047.53
09025.11
Geiger-Mller Counter
13606.99
13500.93
07128.00
Teslameter, digital
13610.93
Hall probe, tangential, with protective cap
13610.02
07542.11
07361.01
07361.04

-spectroscopy
P2523200
-spectrum of 90Sr.
Tasks:
1. Energy calibration of the magnetic spectrometer.
2. Measurement of the -spectra of
90
Sr and 22Na.
3. Determination of the decay energy
of the two isotopes.
Radioactivity
Law of distance and absorption of gamma or beta rays
5.2.41-01/11

Radioactive radiation
Beta-decay
Conservation of parity
Antineutrino
Gamma quanta
Half-value thickness
Absorption coefficient
Term diagram
Pair formation
Compton effect
Photoelectric effect
Conservation of angular
momentum
Weak interaction
Dead time
Principle:
The inverse square law of distance is
demonstrated with the gamma radiation from a 60Co preparation, the
half-value thickness and absorption
What you need:
cm

Experiment P2524101 with GM Counter
Radioactive sources, set
09047.50
Absorption plates for beta-rays
09024.00
09200.00
09201.00
09202.00
09204.00
09025.11
07542.10
03011.00
Geiger-Mueller-Counter
13606.99
Absorption material, lead
09029.01
Absorption material, iron
09029.02
Absorption material, aluminium
09029.03
Absorption material, Plexiglas
09029.04
Absorption material, concrete
09029.05
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
Data cable, plug/socket, 9 pole
14602.00
14506.61
Counter tube module
1210 6.00

Law of distance and absorption of gamma
or beta rays
P25241 01/11

g cm
Attenuation coefficient of different materials as a function of the material density (from left to right: Plexiglas, concrete, aluminium, iron, lead).
coefficient of various materials

determined with the narrow beam
system and the corresponding mass
attenuation coefficient calculated.
Tasks:
1. To measure the impulse counting
rate as a function of the distance
between the source and the counter tube.
2. To determine the half-value thickness d1/2 and the absorption coefficient of a number of materials
by measuring the impulse count-
ing rate as a function of the thickness of the irradiated material.

Lead, iron, aluminium, concrete
and Plexiglas are used as absorbers.
3. To calculate the mass attenuation
coefficient from the measured
values.

5.2.42-01/11/15
Radioactivity
Energy Dependence of the -absorption Coefficient

Compton scattering
Photo effect
Pair production
Radioactive decay
-spectroscopy
Principle:
The intensity of -radiation decreases when it passes through solid matter. The attenuation can be the result
of Compton scattering, the photo
effect or the pair production. An
absorption coefficient can be attributed to each of the three phenomena. These absorption coefficients, as
well as the total absorption, are
highly energy-dependent. The energy
dependence of the total absorption
coefficient for aluminium in the
range below 1.3 MeV is verified.
What you need:

Software for Multi-Channel-Analyzer
Radioactive Source Cs-137, 37kBq
Gamma detector
Operating unit for gamma detector
High voltage connecting cable
xyt recorder
Absorption material, aluminium
Cobra3 BASIC-UNIT
Power supply 12V/2A
13726.99
14452.61
09090.11
09096.01
09101.00
09101.93
09101.10
13725.93
11459.95
11416.97
09200.00
09203.00
02074.00
03010.00
09202.00
09029.03
07542.27
07542.11
07362.01
07362.04
14602.00
12150.00
12151.99
14504.61
14506.61
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Energy Dependence of the -absorption
Coefficient
25242 01/11/15
Total gamma-absorption coefficient as a function of the energy.
Tasks:
1. For each of the emitting isotopes
Na22, Cs137 and Am241 the -spectrum is traced and a treshold
energy, Ethres, just below the
photo-peak in the high energy
range determined.
2. Using the scintillation counter in
conjunction with the pulse height
analyser as a monochromator, the
-intensity is measured as a function of the thickness of different
aluminium layers. The three emitting isotopes are used successively as the source, assuming that
the energy of the emitted -radiation is known.
Radioactivity
Compton effect
5.2.44-01/11/15

Corpuscle
Scattering
Compton wavelength
-quanta
De Broglie wavelength
Klein-Nishina formula
Principle:
The energy of scattered -radiation
is measured as a function of the
angle of scatter. The Compton wavelength is determined from the measured values.
What you need:

Software for Multi-Channel-Analyzer
Radioactive source, Na-22, 74kBq
Radioactive source Cs-137,18.5 MBq
Gamma detector
xyt recorder
Shielding cylinder for gamma-detector
Rod, iron, d = 25 mm, l = 200 mm
Lead block, 200 x 100 x 50 mm
Lead brick with hole
Cobra3 BASIC-UNIT
Power supply 12V/2A
13726.99
14452.61
09047.52
09090.11
09096.01
09096.20
09101.00
09101.93
09101.10
13725.93
11459.95
11416.97
09101.11
09101.13
09029.11
09021.00
09202.00
07542.27
07542.11
07362.01
07362.04
14602.00
12150.00
12151.99
14504.61
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Energy of known peaks as a function of the pulse height.

1
1
1
1
1
1
3
2
2
1
1
1
1
1
1
1
1
1
1
Tasks:
1. Calibrate the measuring set-up
with the aid of a Cs-137 calibrating source (37 kBq), an Am-241
source (370 kBq) and a Na-22
source (74 kBq).
2. Measure the energy of the Cs-137
661.6 keV peaks scattered at different angles and calculate the
Compton wavelength from the
readings taken.

Compton effect
P25244 01/11/15

5.2.45-01/11/15
Radioactivity
Internal conversion in
137m
Ba
Set-up of experiment P2524501 with xyt recorder

-radiation
Nuclear transitions
Duration
Metastable states
Isotopic spin quantum
numbers
Rules governing selection
Multipole radiation
Isomeric nuclei
Photonuclear reaction
Conversion electron
Characteristic X-ray radiation
Scintillation detectors
Principle:
The radiation emitted during the
decay of the 137Cs isotope is measured with a scintillation detector
and the energy spectrum determined
with a pulse height analyzer. The
spectrum contains fractions due to a
What you need:

13726.99
14452.61
09096.01
Gamma detector
09101.00
09101.93
09101.10
13725.93
11459.95
XYt recorder
11416.97
02026.55
02040.55
Tripod base -PASS-
02002.55
07542.27
07542.11
Connecting cable, 4 mm plug, 32 A, red, l = 75 cm 07362.01
14602.00
Cobra3 BASIC-UNIT
12150.00
Power supply 12V/2A
12151.99
14504.61
-spectrum of 137Cs. F_x corresponds to characteristic X-ray radiation caused

by internal conversion in Ba-137. F_y1 and F_y2 corresponds to the transition radiation.
-transition and fractions originating from a characteristic X-ray radiation. The areas of the fractions in
question are determined and the
conversion factor obtained from
them.
Tasks:
1. Measurement of the g-spectrum
of 137Cs using a scintillation detector.
2. Determination of the conversion
factor of the 137mBa excited nucleus.
PComplete Equipment Set, Manual on CD-ROM included

Internal conversion in 137mBa
P25245 01/11/15
Vorspann
13.09.2006
7:32 Uhr
Seite 261
Index
Vorspann
13.09.2006
7:32 Uhr
Seite 262
Index
-, -, -particles
217
-energies of 226Ra
221
Anode
205
Bohr magneton
Anomalous Hall effect
234
Bohrs atomic model 210, 246, 248
Antineutrino
225
Boiling point
Aperiodic case
43, 44
Apparent force
31, 32
210, 211
134, 135, 137
139
Bounding surface
56
-particles in gases
222
Atomic beam
211
Boyle and Mariottes law 126, 147
-spectrum of 241Am
220
Atomic energy level scheme
248
Boyle temperature
Absorption
143, 197, 205, 237

238, 239, 241, 242, 252
Absorption coefficient of
ultrasonic waves
71
Absorption edges
249, 250, 251
Atomic model according

to Bohr
237, 238, 239

241, 242, 247
Absorption factor
248
257, 258
Absorption inverse
square law
253
Absorption of gamma
or beta rays
225
247
Atomic scattering factor
256, 257
258
Atomic spectra
209
Attenuation coefficient
223
183, 184, 190

183, 184
Acceleration
19, 20
Acceleration due to gravity
19, 24
Acceptors
159, 160
61
Acoustic resonant circuit
65
Acoustic waves
66
Adhesion
55
Adiabatic coefficient of gases
132
Adsorption
206
Advanced Optics
121
Aerofoil
58
Air track
19, 20, 21, 22
Airy disk, Airy ring
99
Amontons law
126, 147
Amplitude holograms
112
Amplitude
36, 64
Analyzer
106, 109
Angle of incidence
58
Angle of scattering
219
28, 29, 30
33, 40, 41
Angular frequency
Angular momentum
43, 44
27, 30, 34
35, 207, 209
45, 46
48
Angular restoring torque
47
Angular velocity 28, 29, 30, 31, 32

33, 40, 41, 47, 52
237, 238, 239

240, 243, 244
245, 248, 251, 252
Bragg reflection
213
Bragg scattering
241, 242, 246

247, 249, 250
256, 257, 258
Bravais lattice
251, 256, 257, 258
155, 186
Average velocity
130
Avogadros law
147
Brewster angle
113, 115
162
Brewsters law
108, 109
Axis of rotation
45, 46, 48
-deflection
217
-decay, rays
224, 225
-spectroscopy
224
Bremsstrahlung
237, 238, 239

241, 242, 245
247, 254, 255
Broadening of lines due to

Doppler effect and pressure
broadening
167, 170, 184

185, 188, 190
74, 99, 102
Ballistic Pendulum
27
Capacitance of a plate
capacitor
171
Ballistics
26
Capacitance of metal spheres
167
208
Band gap
235, 236
Band-pass filter
192
Band spacing
Band theory
231, 232
231, 232, 233
235, 236
Band-width
185, 192

Barrier layer
Basic constants
Beat
Capacitor
57
128, 221
13
40, 41
164, 165, 166

167, 185, 188
184
Carbon film resistor
155
Cardanic gyroscope
35
Cavendish balance
25
Cavity resonator
65
Central force
219
74, 99
31, 32
111
Birefringence
115
Black body radiation
141
Blood vessel model
254
Bode diagram
188
234
Charging
165, 166
Charging capacitor
186
Charles (Amontons) law
126
Chemical potential
139, 140
Chladni figures
62
153, 188
30

polarised light
106

polarized waves
195
58
Clausius-Clapeyron
equation
137, 138
Cloud Chamber
217
CO2-laser
113
Cobra3
260
Coefficient of cubic
compressibility
126
expansion
126
Coefficient of thermal tension 126
202
31, 32, 52
Birefraction
Charge carriers
Cathode rays
Centripetal force
173, 174
155
Coherence
Centrifugal force
Biot-Savarts law
162, 167
Charge carrier generation
205
58
208, 230, 246
Charge
Cathode
Bernoulli equation
Binding energy
228, 230, 240

243, 244, 245
246, 249
Coercive field strength
61
222
Characteristic
X-ray radiation
137
Beat frequency
Bethe formula
237, 238
239, 240
256, 257, 258
Carnot cycle
Centre of gravity
Bessel function
238
Characteristic X-rays
Circulation
Babinets theorem
Balmer series
239
Characteristic X-rays of
molybdenum
Circular motion
C
Capacitance
Circuit
95
Characteristic curves
Characteristic curves of
semiconductors
Characteristic impedance
45, 46
160
160
40, 41
43, 44
178
93, 95, 99
100, 101, 102, 112
Coherence conditions
95
Coherence length for

non punctual light sources
95
Coherence time
95
Coherent light
91
Coil
180, 181, 185, 188
183
Collector equations
143
Collision of second type
115
Compressibility
69
Compressor
Compton effect
192
Characteristic radiation
237, 238
239, 241, 242
247, 248, 254, 255
246
Characteristic X-rays of copper 237
131
Avalanche effect
Avogadros number
AC impedance
Bragg equation
208
225, 226
Absorption edges of X-rays
AC circuit
Atomic form factor
Characteristic X-ray lines

of different anode materials
Compton scattering
144
225, 227, 229
242, 252
226, 229
247
252
Vorspann
13.09.2006
7:32 Uhr
Seite 263
Index
Compton wavelength
227, 252
Concave lens
Concentration ratio
139, 140
Condensation
Conduction band
Crystal lattices
88
144
159, 160, 231
232, 233, 235, 236
Conduction of heat
Conductivity
143
151, 152, 163
231, 232
Conductivity of metals
Conductor
142
153, 163
Conductor (Magnetic field)
177
Connection between the fine

structure of the -spectrum
and the accompanying
-spectrum
220
Conservation of angular
momentum
225
20, 21
22, 33
250, 251
256, 257, 258
Crystal structures
237, 238, 239
245, 249, 250, 251
Crystal structures cubic
250
Crystal structures hexagonal
250
Crystal systems
250, 251
256, 257, 258
Cycle
144
D
Damped oscillation
182
Damped/undamped
free oscillation
43, 44
185
Constructive and destructive

interference
De Broglie equation
213
195
De Broglie relationship
97
151, 152
De Broglie wavelength
88
98
208
Efficiency
194
Efficiency rating
Diffraction index
179
Elastic after-effect
17
Diffraction spectrometer
207
Elastic collision
21
97
Elastic hysteresis
17
Diffraction uncertainty
143, 146, 157, 159

158
159
Electric field constant
87
Debye-Scherrer patterns
256
186
Electric field strenght
168, 169
Decay constant
214, 215
Coulomb forces
219
Decay diagram
224
Coulomb potential
170
Decay energy
128, 221, 224
Decay series
128, 217, 221
38, 39
Decomposition voltage
161
Defect electrons
234
Deformation
Degree of freedom
15
139, 140
128
192
Demonstration experiments 83, 84

122, 147, 198
55, 131
Demonstration track 19, 20, 21, 22
Cryoscopic constants
140
Density
Cryoscopy
140
Density of liquids
Crystal classes
251
Detection probability
Diode and Zener diode

Diode laser
170, 219
Critical point
Edge diffraction
Diffraction image
of a diffraction grating
Diffusion potential
257, 258
Critical or optimum coupling
139
213
Debye-Waller factor
40, 41
Ebullioscopic constants
Debye-Scherrer method
217
43, 44
172
217
Cosmic radiation
Creeping
Diffusion cloud chamber
120
Coupled Pendula
202
Debye-Scherrer measurements 258
Debye-Sears-effect
192
e/m
142
227
Diffusion
Corpuscle
14
58
134, 135
257
Couple
54
Dynamic pressure
Debye temperature
Debye-Scherrer reflexes
214, 215, 208
Dynamic and kinematic

viscosity
Diffractometric measurements 257
80
Counting rate
36
216, 225
Cornus spiral
216, 223
228
Duration of oscillation
Dead time
250
Counter tube
Duration
Electric charge
Debye-Scherrer powder
method
162
134, 135
227
14
Coulometry
194
Dulong Petits law
Diffractometric Debye-Scherrer
patterns
256
Coplanar forces
168, 169
66, 72, 73, 74, 75

80, 97, 98, 99, 100
101, 102, 112, 194
195, 241, 242
245
Elastic loss
158
Coulombs law
Diffraction
Duane-Hunt
displacement law
Diffractometric Debye-Scherrer
measurements
257, 258
Cooling capacity
Coulomb field
167
Diffraction at the slit
214, 215, 208
Convex lens
Dielectrics
216
13
Daughter substance
146
171
Different symmetries
of distributions
Curvature
225
Conversion of heat
Dielectric polarisation
179
Conservation of parity
228
168, 169
171
Differentiating network
49
Conversion electron
177
Damping of waves
143, 158
171
Current density
Conservation of momentum 21, 22
Convection
Dielectric constant
222
43, 44
254
13
Differencial energy loss
Damping constant
Contrast medium
Diameter
156
252
Contact resistance
112
Current balance
Damping
and momentum
Developing of film
21, 22
Elasticity
16
170
Electric constant
168, 171
Electric discharge
113
Electric field
164, 167
168, 170, 201
116, 118
Electric flow
170
Direct energy conversion
157
Electric flux
168
Directional characteristic
pattern
196
Electric theory of light
109
Directional quantization
211
Electrical conductivity
142
Directivity
196
Electrical eddy field
181
Electrical fields
164
Discharging
165, 166
214, 215
Dispersion
89
Dissipation factor
192
Donors
Doppler effect
159, 160
61, 81, 114
61, 81
Electrolysis
161, 163
161, 162, 163
Electromagnetic field
interaction
110
Electromagnetic theory
of light
108
Electromagnetism
110
Dosimeter
253
Electromotive force (e.m.f.)
154
Double refraction
106
Electron absorption
223
Electron capture
224
Double slit
207
Electron charge
201, 202
Drag
58
Electron collision
203, 204
69, 223
Drag coefficient
58
51
Droplet method
201
229
Du Nouy method
55
Doublets
72, 101
Electron concentration
in gases
222
213
Vorspann
13.09.2006
7:32 Uhr
Seite 264
Index
Electron in crossed fields
202
Electron mass
202
Electron oscillation
110
Electron spin
210, 211
Free path
Fabry Perot Etalon
212
Electrons
234
Falling ball viscometer
Electro-optical modulator
111
167, 168,
169
168, 169
170
Elementary charge
201
Energy-band diagram
159, 160
Free, damped, forced and

torsional oscillations
25
115
140
210
Frequency
54
Faraday effect
110
Faradays contant
162
Faradays law
155
49, 63, 64
67, 68, 69, 87
Frequency doubling
Fresnel diffraction
161, 162
117
72, 73, 74, 75
80, 93, 95, 99
100, 101, 102
Fresnel biprism
Fermi characteristic
energy level
159
Fresnel integrals
178
Fresnel lenses
75
90
Energy ceiling
143
Ferromagnetic material
179
Fresnel mirror
Energy dose
253
Fibre optics
118
Fresnels equations
Field intensity
170
Field strength
177
Energy level diagram

(decay diagram)
Energy levels
220
207, 208, 209, 237

238, 239, 240, 241
242, 243, 244, 245
246, 249
Energy loss
222
Energy of rotation
33
Energy of translation
33
Energy quantum
203, 204, 212
Energy term symbols
243, 244
Etvs equation
55
Equation of adiabatic change

of slate
Equation of state
132
57, 126, 131
Equation of state for

ideal gases
128, 129
Equilibrium
14, 52
Equilibrium spacing
125
Equipotential lines
164
Equivalent dose and ion dose

and their rates
90
Filter
Fine structure
120, 179, 188

207, 220, 243, 244
First and second law

of thermodynamics
First law of
thermodynamics
146
128, 129, 136
Flammersfeld oscillator
132
Flat coils
174
Fluidity
54
Focal length
88
Focal point
195
Forbidden band
235, 236
207, 209
225
Forbidden zone
231, 232, 233
Force
19
Forced cooling
158
Frictional resistance
108
74, 75
93, 99
80, 194
58
Frustrated total reflection
197
Full-wave rectifier
186
-absorption
-emission
226, 232
220
-quanta
225, 227
-radiation
228, 229
rays
225
-spectrometry
230
-spectroscopy
226
g-factor
G-modulus
211, 212
47
Galvanic elements
161
Gas
130
253
Equivalent of heat
136
Fourier analysis
ESR
212
Fourier optics
119, 120
Gas constant
Fourier transform
119, 120
Gas discharge tube
115
Gas laws
146
Gaussian beam
118
Gaussian distribution
216
Gaussian rule
170
Gay-Lussac theory
133
51
44
Exchange energy
207, 209
Four-point measurement
Excitation energy
203, 204
207, 209
Four-wire method of
measurement
Excited nuclear states
220
Exitation of molecular
vibration
113
Expected value of pulse rate

Extension and compression
External photoelectric
effect
216
165, 166
203
Franck-Hertz experiment
with Ne-tube
204
72, 73, 74
75, 80, 95, 98
99, 100, 101, 102
119, 120, 194
Free and fixed end
Extrinsic conduction 233, 235, 236
Free charges
Extrinsic conductivity
Free fall
231, 232
151
Franck-Hertz experiment
with Hg-tube
18
205, 206
142
49
171
23, 24
82
Gradient
170
Graetz rectifier
186
Graphite structure
213
Grating spectroscope
89
Gravitational acceleration
23
Gravitational constant
25
Gravitational force
39
Gravity pendulum
40, 41
Greenhouse effect
143
Grids
100
Group velocity
50
Grneisen equation
Gyroscope
57
H
H2O anomaly
Half life
51
165, 166, 214, 215
126, 147
Geiger-Nuttal law
128, 221
General equation
of state for ideal gases
126, 162
Germanium
235, 236
Gibbs-Helmholtz
equation
Glass jacket system
139, 140
140
214, 215
Half-shade principle
107
Half-value thickness
225, 247
Half-wave rectifier
Hall coefficient
Hall effect
186
231, 232
110, 173, 174, 231

232, 233, 234
Hall mobility
234
Harmonic oscillation 36, 38, 39, 42

Harmonic sound intervals
59
Harmonic wave
50
128, 129
134, 135
Heat conductivity
145, 158
Heat insulation
Heat of vaporization
Heat pipe
Gay-Lussacs law
125
33, 34, 35
Half-life and
radioactive equilibrium
Forced oscillation
Evaporation
43, 44
Fresnel zones
80, 98
Grade resistance
Heat pump
145
137, 138
158
144, 158
Heat radiation
143
Heat transfer
145
Heat transition
145
Heat transport
142
Heating capacity
158
Heisenbergs uncertainty
principle
97
Helium Neon Laser
115
Helmholtz arrangement
174
Helmholtz coils
172, 175
Vorspann
13.09.2006
7:32 Uhr
Seite 265
Index
Helmholtz resonators
65
Henrys law
139
High- and low-pass filters
114
High-pass filter
Interface-SystemCobra3
Interference
64, 66, 72, 73, 74, 75

76, 77, 79, 80, 90, 92
93, 94, 95, 96, 99, 100
101,102, 112, 114, 179, 193
237, 238, 239, 242, 245
114, 179, 188
Holograms
260
112
Interference in thin films
Hookes law
42
210
196
Interference of acoustic waves
Hothouse effect
145
Interference of equal inclination 92
72, 73, 74, 75

76, 80, 99, 100
101, 102, 119, 120, 194
Hydrogen bond
Hysteresis
193
Interference of thin layers
92
219
172
119, 120
113, 116, 117
58
181
183, 185, 188
182
170, 173, 176

177, 178, 180, 181
228
53
154, 159, 186
Intrinsic conduction
Inside diameter thickness
13
Instantaneous velocity
33
179
240
98
Interaction potential
131
Interaction with material
229
Interface
55
114
Laser physics
121
Lattice constant
Isochoric and isothermal

changes
changes of slate
257
258
Loudness
64
Loss resistance
185
Low-pass filter
179, 188
Low resistance
151
133
Lattice vibration
134, 135
Laue method
Law of absorption
251
71, 247
254, 255
133
217
Law of collision
21, 22
253
Law of distance
169, 196
128, 129
146
128, 129
172
Isogenic lines
172
Isomeric nuclei
228
Isotherms
128, 129
128, 221
J
Joule effect
158
133
K
K doublet splitting
of molybdenum X-rays
Lorentz-polarization factor
133
Isoclinic lines
K doublet splitting
of iron X-rays
142
Luminous intensity
113, 115, 116, 117
Isobars
Lorenz number
125
Inverse Joule-Thomson effect
Ionizing energy
156, 202, 217

231, 232, 233
Lattice potential
Intrinsic energy
Inversion
Lorentz force
103, 104, 105
231, 232
Intrinsic conductivity
237, 238
239, 245
60, 63, 68
70, 71, 72, 73
74, 75, 76, 77
78, 79, 80, 81
Luminous flux
Isotopic spin quantum numbers 228
27
Laser Doppler anemometry
Longitudinal waves
213
191
Inelastic collision
99, 100, 101, 102

114, 115, 116, 117, 118
Lattice planes
Induction impulse
189
Laser
43, 44
103, 104, 105
Isotopic properties
Intensity
Luminance
170
Intensity of characteristic
X-rays
63
233, 235
236
Induction constant
Integrating network
Kundts tube
134, 135
Ionizing particles
Inductive and capacitive

reactance
227
Internal energy
235, 236
Induction
253
178
Impurity depletion
Local ion dose rate
212
189, 190
Inductance
180
Land factor
Impedance
Induced voltage
Loaded transformer
153, 154, 183

184, 188, 189
79, 94, 95, 96, 179
Inversion temperature
Induced resistance
77
Kirchhoffs laws
54
97
Interferometer
219
Induced emission
Lloyd mirror
Kirchhoffs diffraction formula
51
168, 170
Index of refraction
130
Kinetic theory of gases
58
103, 104, 105
Inclinometer
115
Laminar flow
66, 93
126, 131
Impact parameter
Littrow prism
105
Internal resistance
Image charge
82
Lamberts law
I
Illuminance
Kinetic energy
Interference of ultrasonic waves 77
Internal friction
Identity of atomic number

and charge on the nucleus
66
Internal conversion
in 144mBa
Ideal gas
Liquid
Klein-Nishina formula
Interference of
electromagnetic waves
Horn antenna
Huygens principle
111
91
15, 16, 17, 18
Hookes law oscillations
Kerr effect
Law of inductance
182
Law of induction
191
Law of gravitation
25
Law of lenses
88
Law of refraction
Laws of falling bodies
13
Lenses
119, 120
Lenzs law
14
Lift and drag
58
Light intensity
105
Light quantity
105
Light velocity
96
Limit of elasticity
Lyman-, Paschen-, Brackettand Pfund-Series
208
M
83
84
Magnet Board Optics
122
Magnetic Board Electricity
198
Magnetic Board Heat
147
Magnetic field
172, 173, 174

175, 176, 177
Magnetic field constant

87
178, 181
182
Lever
17, 18, 42
Linearity
195
Linear expansion
125
Linear motion due to

constant acceleration
243
23, 24
Length
Linear motion
244
108
103, 104
20, 21, 22, 82

23, 24
Linear relationship between

the propagation time of sound
and its respective path
60
Magnetic field of paired coils
174
Magnetic field of single coils
173
Magnetic field strength
178
Magnetic flow density
172
Magnetic flux
175, 176, 177

180, 181, 191
Magnetic flux, coil
178
Magnetic flux density
173
Magnetic inclination and

declination
172
Magnetic induction
181
Magnetic induction (formerly

magnetic-flux density)
156
Magnetic moment
175, 211
Vorspann
13.09.2006
7:32 Uhr
Seite 266
Index
Magnetic resistance
231, 232
233
Magnetostriction
Magnification
Malus law
Mass absorption
coefficient
158
Molecular vibration
113
Numerical aperture
118
PEM fuel cell
161
Molecule radius
131
Nutation
Molecules
130
Maxwells equations 171, 174, 176

177, 181, 183
184, 191
33
130, 211
Mean energy loss of

-particles per collision
222
Mean free path length
222
222
Mean lifetime of a
metastable state
116
Measurement accuracy
97
Measurement of projectile
velocities
27
Mechanical equivalent of heat 136

158
Peltier heat pump
89
Mean ionization energy

of gas atoms
Peltier effect
228
33
Maxwellian velocity
distribution
155
Nuclear transitions
155
Maxwells wheel
NTC
16
Mechanical work
136
Medical
254
Moment
Moment of inertia
Medical application of X-rays
14, 28, 29, 30

27, 28, 29, 30
33, 34, 35, 37
38, 45, 46, 47, 48
Moment of inertia of
2 point masses
48
Moment of inertia of a bar
28, 48
cylinder
48
disc
28, 48
mass point
Moment of inertia of a sphere
Optical path difference
Momentum
82
Optical pumping
116, 117
Monochromatization
241, 242
of X-rays
256, 257, 258
Optical resonator
113, 117
Monomode and multimode

fibre
Order of diffraction
Moseleys law
230, 246, 248
Motion involving uniform

acceleration
Motion track
118
26
19, 20, 21, 22
Moving charges
156
Multiple slit
73, 100
Metals (Hall effect)
234
201
Mixture temperature
134, 135
Mobility
231, 232
Model kinetic energy

Modulation
160
25
155
Millikan experiment
Operating point
88
Metallic film resistor
249, 250, 251

256, 257, 258
207
Optical instruments
217
Miller indices
One-electron spectra
Moment of inertia of spheres

and rods
Mesons
193, 194
195, 196, 197
189
111
Multipole radiation
Microwaves
Ohmic resistance
Optical anisotropy
51
88
88
151, 152, 154, 163
48
Melting
Microscope
Object distance
107
257, 258
Michelson interferometer 79, 94, 95

96, 179, 193
112
Optical activity
Multiplicity factor
92
Object beam
28
254
Mica plate
O
Ohms law
228
Optical rotatory power
Ordinary and
extraordinary ray
107
237, 238, 239

106
Orthohelium
207, 209
Oscillating circuits
192
Oscillation period
Oscillations
92
38, 39
38, 39, 42, 43, 44
Oscillatory circuit
182
233
Natural frequency
49
Natural vibrations
59, 62, 63
Nd-YAG laser
117
Neutrino
224
Newtons law
30, 82
Newtons 2nd law
19, 20
Newtons ring apparatus
91
Newtons rings
91
38, 39
37, 37, 38, 39
40, 41, 43, 44
Period
36
Periodic motion
49
Phase
87, 90, 94, 96, 179
Phase and group velocity
68, 78
Phase center
196
Phase displacement
183, 184
185, 188
Phase holograms
112
Phase relationship
91
Phase shift
64, 190
Phase velocity
49, 50, 197
Phasor diagram
190
Photo-conductive effect
159
Photo effect
226
Photoelectric effect
205, 206, 225

229, 247, 230
Photometric law
103, 104
Photon energy
205, 206
Photonuclear cross-section
229
Photonuclear reaction
228
Physical pendulum
37, 38, 39
68, 69
Piezoelectric ultrasonic
transducer
69
Piezoelectric ultrasonics
transformer
68
Pin hole
74
Pin hole diaphragms
99
Plancks constant
p-germanium (Hall effect) 231, 232
n-germanium (Hall effect)
Pendulum oscillations
Pendulum
106
207, 209
209, 228
34, 35
Optic axis
Multiplicity
Metastable states
192
157, 158
128, 129
Mathematical pendulum 36, 38, 39
Maxwell relationship
Peltier coefficient
Mole volumes
213
Maxwell disk
Pauli method
234
51
59
Mathies rule
154
Normal Hall effect
Mohr balance
223
Material waves
No-load operation
88, 95
247, 254, 255
Mass-spring system
179
109
Mass coverage
111
15, 47
Modulation of light
208
p-n junction
159, 160
Plancks quantum
of action
Pair formation
225, 229
Plane of polarisation
106
Pair production
226, 247
Plane parallel plate
92
Paraboloid of rotation
Parahelium
Parallel conductance
52
207, 209
Plastic flow
Plasticity
205, 206, 245
16
16, 53
192
Plate capacitor
164
Parallel springs
42
PLZT-element
111
Parallel-T filters
179
Pohls pendulum
Parallel-tuned circuit
185
Pohls plate
43, 44
92
Parent substance
214, 215
Poissons distribution
Particle energy
128, 221
Poissons ratio
15
216
Newtonian and
non-Newtonian liquid
53
Particle velocity
217
Poissons spot
74, 99, 102
130
Newtonian liquid
54
Path difference
91
Polar diagram
58
87
Neyer-Neldel rule
233
Path of a ray
88
Polarimetry
107
Vorspann
13.09.2006
7:32 Uhr
Seite 267
Index
Polariser
Polarizability
Polarization
106
Radioactive particles
217
RLC circuit
185
Slit
89
Radioactive radiation
225
189
Slope efficiency
118
Range dispersion
222
Rope wave
50
Smoothing factor
186
53
Solar cell
159
Solar ray collector
143
Solenoids
182
106, 108, 109

110, 113, 117
Raoults law
139, 140
Rotary viscometer
214, 215
Rotary motion
Polarization level
108
Rate of decay
Polarization of light
111
Polarization of microwaves
195
Ratio of attenuation/
decrement
Polarizer
109
RC filters
179
Polarizer and analyzer
195
Reaction rate
107
Polytropic equation
132
Real and virtual image
112
Positron
224
Real charges
171
Potential
164, 167
Real image
Potential difference
Reciprocal lattice
170
Potential energy
33
Potential well model of

the atomic nucleus
128, 221
Power and Work
152
Power matching
154
Precession
34, 35
Pressure
57, 138
Pressure and temperature
126
Principle of conservation
of momentum
27
Prism
89
Projectile motion
26
Propagation of a wave
49
Propagation of sound
waves
61, 71, 81
PTC
155
Pull-out method
56
Q factor
Quantisation of energy levels

Quantity of light
210
103, 104
Reflection
Radioactive decay
216, 217
223, 226
128, 214
215, 221
Rotational energy
waves
70
Refraction
Refractive index
92, 197
87, 89, 94, 96
Refrigerator
144
Relativistic Lorentz equation
224
16, 116, 117

178
89
Rchardts experiment
132
Rules governing selection
228
Rutherford atomic model
219
219
Rydberg constant
246
Rydberg series
209
Sound pressure
67, 78
Sound velocity
67
Sound velocity in gases

and solids
63
Spatial and time coherence
95
Specific charge of the electron 202

Specific heat
142
Specific rotation
107
Specific thermal capacity
136
Spectra
207
Spectral lines
(shape and half width value)
95
Spectral power density
114
Spectrometer-goniometer
89
Spectroscope
89
219 ,227
Scattering of light by small

particles (Mie scattering)
Scintillation detectors
114
228, 229
Screening constant
248
Second order conductors
163
Seebeck coefficient
157, 158
Seebeck effect
(thermoelectric effect)
Selection rules
Self-inductance
Resistance to pressure
58
157
207, 209, 243, 244
Semiconductor
151, 152
43, 44, 65
60, 63, 67, 69
107
58
182, 192, 212
Sound
78
Saccharimetry
Resistance to flow
99
208, 248
Rydberg frequency
Resistance 151, 153, 185, 188, 190
Resistivity
Sonar principle
27, 29
Rowland grating
Scattering
Resonance frequency
141
113
108
106
196
66, 77, 79, 92

108, 193, 197
Rotation niveau
Reflection factor
Quarterwave plates
Radiation field
112
29, 30
Sampling theorem
Resonance
Radiation
37
Rotation
108
212
186
186
52
Reflection coefficient
Quantum number
r.m.s. value
120
Reference beam
204
249, 250, 251

256, 257, 258
Reduced length of pendulum
Quantum leap
64
88
Rectifier circuits
Resolution of optical
instruments
Quincke tube
131, 133
Recovering time and resolution

time of a counter tube
216
Remanence
182, 185, 192, 253
43, 44
Reconstruction
Relaxation
Rotating liquids
Real gas
Potential and kinetic energy 27, 82
28, 31, 32, 52
97, 101, 102
182, 190
128, 159, 160
221, 231, 232
233, 235, 236
Semiconductor
thermogenerator
Serial springs
157
42
Spectrum of emission
113
Speed of light
179
Spin
209
Spin-orbital angular
momentum interaction
207
Spin-orbit coupling
179
Spiral spring
40, 41
Spontaneous and stimulated

light emission
115
Spontaneous emission 113, 116, 117

Spring constant
17, 18, 40, 41

42, 45, 46, 48
Square wave
179
Standard deviation
216
Standing waves
115
Series connection
153
Resonator modes
117
Series-tuned circuit
185
Rest energy
252
Shear modulus
Resting energy
224
Shear stress
Restrictor valve
144
Reversible cycles
146
Shell structure of electron

shells
230
Steiners law
53
207, 209
Spinorbit interaction
Resonator cavity
25, 47
114
49, 62, 193
Statics
14
Stationary longitudinal waves
70
Stationary waves
62, 63, 66, 67
Stefan-Boltzmanns law
141
37
Reversible pendulum
37
Short circuit
154
Steiners theorem
Reynolds number
58
Single electron atom
208
Step response
179
Stereographic projection
255
211
Stirling engine
146
Rigid body
45, 46, 48
Ring method
55
Ripple voltage
186
Single slit
Slit diffraction
72
207, 209
98
25, 45, 46
Vorspann
13.09.2006
7:32 Uhr
Seite 268
Index
Stokes law
54, 201
Straight conductor
(magnetic field)
176
Stress
15
Thermoelectric e. m. f.
141
157, 158
Thermogenerator
157
Thomson coefficient
157, 158
157, 158
Uniform acceleration
82
156, 175
126
Universal gas constant degree

of freedom
129
Structure amplitude
250, 251
Thomson equations
Structure factor
249, 256
257, 258
Threshold energy
118
Throttling
133
Unloaded transformer
Structure of NaCl
249
Superimposition
of magnetic fields
176
Time constant
Time measurement
Torque
Superimposition
of sound waves
61, 81
70, 77
79, 80
Surface adhesion
Surface energy
Surface tension
16, 29, 34, 35

40, 41, 44, 47, 175
Torque and restoring torque

Torsion modulus
16, 47, 48
43, 44
168, 169
170
Torsional vibration
40, 41, 43, 44

45, 46, 47, 48
55, 56
Total reflection
26
Transfer function
197
Transformer
Sweep
192
Transistor
Transit time
118, 197
Trajectory parabola
Surface waves
187
Transmission
88
Temperature
57, 130, 138
Temperature amplitude
attenuation
Temperature dependence
145
69
141
of resistors and diodes
155
Temperature gradient
142
Term diagram
225
Terminal voltage
154
Terrestrial gravitational
acceleration
37
Testoring torque
44
The Bragg equation
237, 238, 239

240, 243, 244
245, 248, 251, 252
Thermal
Thermal capacity
49, 50, 62, 63, 64, 67

68, 69, 70, 87, 9094, 96,
179, 193, 256, 257, 258
159, 160, 231, 232

233, 235, 236
Van der Waals equation
131, 133
Weak interaction
13
13
Van der Waals force
133
Weight resolution
Vant Hoff law
137
Vant Hoff factor
140
Weiss molecular magnetic

fields
Vaporisation enthalpy
144
Wheatstone bridge
118
Vapour pressure of water 137, 138
Wire loop
173, 174
Variable g-pendulum
Work function
205, 206
Velocity
38, 39
19, 20, 21, 22
Velocity gradient
49, 195
128, 197, 221
114
58
87, 94, 118

60, 63, 67,69
Velocity of sound in air

Velocity of sound
in liquids
64
67, 68, 69
Velocity of ultrasonics
68
Verdets constant
Two-electron spectra
207
Vernier
Two-electron systems: He, Hg
209
Vibration
Two-wire field
211
Vibration niveau
53
Velocity of light
Velocity of sound
64
130
110
13
47, 48
113
59
Virtual image
88
Virtual light source 90, 94, 96, 179

67, 68, 69, 70, 71
72, 73, 74, 75, 76
78, 79, 80, 81
Viscometer
53, 54
Viscosity
53, 54, 201
Viscosity measurements
54
Viscosity of Newtonian
and non-Newtonian liquids
53
X
X-ray 230, 231, 232, 233, 237, 238
239, 240, 241, 242,243, 244
245, 246, 247, 248, 249, 250, 251
252, 253, 254, 255, 256, 257, 258
X-ray bremsstrahlung
248
X-ray dosimetry
253
X-Ray Experiments, Handbook 259

X-ray fluorescence
X-ray tube
Y
Z
Youngs modulus
79
Voltage
Thermal expansion
125
Ultrasonic velocity
78
Voltage doubling
186
Zeeman effect
Thermal pump
146
Ultrasonic waves
Voltage source
154
Zener effect
Thermal radiation
145
Uncertainty of location
97
Voltage stabilisation
186
Zone construction
Thermal tension coefficient
126
Uncertainty of momentum
97
Volume
70, 77
208
153, 164, 167
126, 138
254, 255
X-ray spectral analysis
Ultrasonic MichelsonInterferometer
Visible spectral range
230
X-ray radiation
131
Thermal equation of state
153, 189
187
81
136
179
Wien-Robinson bridge
Thermal energy
64, 107
Weight
80
132
225
Weber-Fechner law
Ultrasonic diffraction
Thermal capacity of gases
97
138, 144
115
Ultrasonic
50
Wave-particle dualism
Velocity distribution
Turbulent flow
Wave equation
Vapour pressure

resonator modes
142
125, 136, 145
Valence band
49, 50, 66, 70
160
118
Turbulence
Wave
142

modes

waves
W
Wavelength
125
Wiedmann-Franz law
193, 197, 252
Tunnel effect
42, 66
Volume expansion of liquids
138, 144
220, 228
Transverse wave
of resistances
Use of an interface
51
Vaporization
180, 182
Telescope
43
Torsion pendulum
52
180
13
56
55, 56
165, 166
126, 128
Volume expansion
Z diode
Zone plate
230
238, 239, 245
15
155
210, 212
155
75
75, 93
Vorspann
13.09.2006
7:32 Uhr
Seite 269
Send to Fax No. (00 49) 5 51 60 4115

or by post
or contact our local representative

D-37070 Gttingen
Federal Republic of Germany
Information / Quotation
Address of institution
Please send detailed descriptions, free of charge

Please send an offer for the following experiments
Telephone
Date
Fax
Signature
Please circle the corresponding experiment numbers

1.1.01-00
1.2.01-00
1.2.02-00
1.2.03-00
1.3.01-01
1.3.01-11
1.3.03-01/05
1.3.03-11/15
1.3.05-01/05
1.3.05-11/15
1.3.07-01
1.3.07-11
1.3.09-11
1.3.11-00
1.3.12-00
1.3.13-01
1.3.13-11
1.3.15-00
1.3.16-01
1.3.16-11
1.3.18-00
1.3.19-00
1.3.20-00
1.3.21-00
1.3.22-00
1.3.23-01
1.3.23-11
1.3.25-01
1.3.25-11
1.3.26-11
1.3.27-01
1.3.27-11
1.3.28-01
1.3.28-11
1.3.30-00
1.3.31-00
1.3.32-00
1.3.33-00
1.4.01-00
1.4.02-00
1.4.03-00
1.4.04-00
1.4.05-00
1.4-06-11
1.4.07-00
1.4.08-00
1.5.01-00
1.5.03-11
1.5.04-01/11
1.5.05-15
1.5.06-01/15
1.5.07-01/15
1.5.08-11
1.5.09-11
1.5.10-00
1.5.11-00
1.5.12-00
1.5.13-00
1.5.14-00
1.5.15-15
1.5.16-15
1.5.17-15
1.5.18-00
1.5.19-15
1.5.20-00
1.5.21-15
1.5.22-00
1.5.23-00
1.5.24-15
2.1.01-00
2.1.02-00
2.1.03-00
2.2.01-00
2.2.02-00
2.2.03-00
2.2.04-00
2.2.05-00
2.2.06-00
2.2.07-00
2.3.01-00
2.3.02-00
2.3.03-00
2.3.04-00
2.3.05-00
2.3.06-00
2.4.02-01
2.4.02-11
2.4.04-00
2.5.01-00
2.5.02-00
2.5.03-00
2.5.04-00
2.6.01-00
2.6.02-00
2.6.03-00
2.6.04-00
2.6.05-11
2.6.07-01
2.6.08-00
2.6.09-00
2.6.10-00
2.6.11-00
2.6.12-00
3.1.01-00
3.2.01-01
3.2.01-15
3.2.02-01
3.2.02-11
3.2.03-00
3.2.04-00
3.2.05-00
3.2.06-00
3.3.01-01
3.3.01-11
3.3.02-00
3.4.01-00
3.4.02-00
3.4.04-00
3.5.01-01/15
3.5.02-00
3.6.01-00
3.6.02-00
3.6.03-00
3.6.04-01/15
4.1.01-01
4.1.01-15
4.1.02-00
4.1.03-00
4.1.04-01/15
4.1.06-01/15
4.1.07-00
4.1.08-00
4.1.09-01
4.1.09-15
4.1.11-00
4.1.12-00
4.1.13-15
4.2.01-00
4.2.02-00
4.2.02-15
4.2.03-00
4.2.04-01
4.2.04-15
4.2.05-00
4.2.06-00
4.3.01-00
4.3.02-01/15
4.3.03-01/15
4.3.04-00
4.3.05-00
4.3.06-00
4.3.07-11
4.3.08-00
4.4.01-00
4.4.02-01/15
4.4.03-01/11
4.4.04-01/11
4.4.05-01/15
4.4.06-01/11
4.4.07-00
4.4.08-00
4.4.09-01/15
4.4.10-00
4.4.11-00
4.4.12-11
4.5.02-00
4.5.04-00
4.5.05-00
4.5.06-00
4.5.08-00
4.5.09-00
5.1.01-00
5.1.02-00
5.1.03-11
5.1.03-15
5.1.04-01/05
5.1.05-01/05
5.1.06-00
5.1.07-00
5.1.08-00
5.1.10-05
5.1.11-01/11
5.1.12-00
5.1.13-00
5.2.01-01
5.2.01-11
5.2.03-11
5.2.04-00
5.2.20-15
5.2.21-01/11/15
5.2.22-01/11/15
5.2.23-01/11/15
5.2.24-01/11/15
5.2.31-00
5.2.32-00
5.2.41-01/11
5.2.42-01/11/15
5.2.44-01/11/15
5.4.45-01/11/15
5.2.46-01/11/15
5.2.47-01/11/15
5.3.01-01
5.3.01-11
5.3.02-01/11
5.3.03-00
5.3.04-01
5.3.04-11
5.4.01-00
5.4.02-00
5.4.03-00
5.4.04-00
5.4.05-00
5.4.06-00
5.4.07-00
5.4.08-00
5.4.09-00
5.4.10-00
5.4.11-00
5.4.12-00
5.4.13-00
5.4.14/15-00
5.4.16-00
5.4.17-00
5.4.18-00
5.4.19-00
5.4.20-00
5.4.21/22/23/24/25-00
5.4.26-00
5.4.27-00
Vorspann
13.09.2006
7:32 Uhr
Seite 270
Send to Fax No. (00 49) 5 51 60 4115

or by post

D-37070 Gttingen
Please send an offer for the following equipment
Telephone
Date
Equipment
Fax
Signature
Article-No.
Quantity
Vorspann
13.09.2006
7:32 Uhr
Seite 271
Send to Fax No. (00 49) 5 51 60 4115

or by post

D-37070 Gttingen
Please send detailed descriptions, free of charge

Please send an offer for the following experiments
Telephone
Date
Fax
Signature
Please circle the corresponding experiment numbers

1.1.01-00
1.2.01-00
1.2.02-00
1.2.03-00
1.3.01-01
1.3.01-11
1.3.03-01/05
1.3.03-11/15
1.3.05-01/05
1.3.05-11/15
1.3.07-01
1.3.07-11
1.3.09-01
1.3.11-00
1.3.12-00
1.3.13-01
1.3.13-11
1.3.15-00
1.3.16-01
1.3.16-11
1.3.18-00
1.3.19-00
1.3.20-00
1.3.21-00
1.3.22-00
1.3.23-01
1.3.23-11
1.3.25-01
1.3.25-11
1.3.26-11
1.3.27-01
1.3.27-11
1.3.28-01
1.3.28-11
1.3.30-00
1.3.31-00
1.3.32-00
1.3.33-00
1.4.01-00
1.4.02-00
1.4.03-00
1.4.04-00
1.4.05-00
1.4-06-11
1.4.07-00
1.4.08-00
1.5.01-00
1.5.03-11
1.5.04-01/11
1.5.05-15
1.5.06-01/15
1.5.07-01/15
1.5.08-11
1.5.09-11
1.5.10-00
1.5.11-00
1.5.12-00
1.5.13-00
1.5.14-00
1.5.15-15
1.5.16-15
1.5.17-15
1.5.18-00
1.5.19-15
1.5.20-00
1.5.21-15
1.5.22-00
1.5.23-00
1.5.24-15
2.1.01-00
2.1.02-00
2.1.03-00
2.2.01-00
2.2.02-00
2.2.03-00
2.2.04-00
2.2.05-00
2.2.06-00
2.2.07-00
2.3.01-00
2.3.02-00
2.3.03-00
2.3.04-00
2.3.05-00
2.3.06-00
2.4.02-01
2.4.02-11
2.4.04-00
2.5.01-00
2.5.02-00
2.5.03-00
2.5.04-00
2.6.01-00
2.6.02-00
2.6.03-00
2.6.04-00
2.6.05-11
2.6.07-01
2.6.08-00
2.6.09-00
2.6.10-00
2.6.11-00
2.6.12-00
3.1.01-00
3.2.01-01
3.2.01-15
3.2.02-01
3.2.02-11
3.2.03-00
3.2.04-00
3.2.05-00
3.2.06-00
3.3.01-01
3.3.01-11
3.3.02-00
3.4.01-00
3.4.02-00
3.4.04-00
3.5.01-01/15
3.5.02-00
3.6.01-00
3.6.02-00
3.6.03-00
3.6.04-01/15
4.1.01-01
4.1.01-15
4.1.02-00
4.1.03-00
4.1.04-01/15
4.1.06-01/15
4.1.07-00
4.1.08-00
4.1.09-01
4.1.09-15
4.1.11-00
4.1.12-00
4.1.13-15
4.2.01-00
4.2.02-00
4.2.02-15
4.2.03-00
4.2.04-01
4.2.04-15
4.2.05-00
4.2.06-00
4.3.01-00
4.3.02-01/15
4.3.03-01/15
4.3.04-00
4.3.05-00
4.3.06-00
4.3.07-11
4.3.08-00
4.4.01-00
4.4.02-01/15
4.4.03-01/11
4.4.04-01/11
4.4.05-01/15
4.4.06-01/11
4.4.07-00
4.4.08-00
4.4.09-01/15
4.4.10-00
4.4.11-00
4.4.12-11
4.5.02-00
4.5.04-00
4.5.05-00
4.5.06-00
4.5.08-00
4.5.09-00
5.1.01-00
5.1.02-00
5.1.03-11
5.1.03-15
5.1.04-01/05
5.1.05-01/05
5.1.06-00
5.1.07-00
5.1.08-00
5.1.10-05
5.1.11-01/11
5.1.12-00
5.1.13-00
5.2.01-01
5.2.01-11
5.2.03-11
5.2.04-00
5.2.20-15
5.2.21-01/11/15
5.2.22-01/11/15
5.2.23-01/11/15
5.2.24-01/11/15
5.2.31-00
5.2.32-00
5.2.41-01/11
5.2.42-01/11/15
5.2.44-01/11/15
5.4.45-01/11/15
5.2.46-01/11/15
5.2.47-01/11/15
5.3.01-01
5.3.01-11
5.3.02-01/11
5.3.03-00
5.3.04-01
5.3.04-11
5.4.01-00
5.4.02-00
5.4.03-00
5.4.04-00
5.4.05-00
5.4.06-00
5.4.07-00
5.4.08-00
5.4.09-00
5.4.10-00
5.4.11-00
5.4.12-00
5.4.13-00
5.4.14/15-00
5.4.16-00
5.4.17-00
5.4.18-00
5.4.19-00
5.4.20-00
5.4.21-00
5.4.22-00
5.4.23-00
5.4.24-00
5.4.25-00
5.4.26-00
5.4.27-00
Vorspann
13.09.2006
7:32 Uhr
Seite 272
Send to Fax No. (00 49) 5 51 60 4115

or by post

D-37070 Gttingen
Please send an offer for the following equipment
Telephone
Date
Equipment
Fax
Signature
Article-No.
Quantity
Vorspann
12.09.2006
23:39 Uhr
Seite 273
catalogues, brochures
and more
PHYSICS CHEMISTRY BIOLOGY
The comprehensive catalogue for physics, chemistry
and biology. Additionally you can find a large number of
laboratory materials and an insight in our particularly
successful teaching systems TESS, Cobra3 and
Natural Sciences on the board.
Available in English and Spanish.
The experiments in the Phywe publication series Laboratory Experiments
are intended for the heads of laboratories,
colleges of advanced technology, technical
colleges and similar institutions and also
for advanced courses in high schools.
Laboratory Experiments Physics is
also available on CD-ROM.
Available in English.
For the student system Advanced Optics
and Laser Physics a special brochure
is available in English.
Special brochures
Additionally there are special brochures for our particularly successful
teaching systems TESS (available in
German, English, French and Spanish),
Cobra3 (available in German, English)
and Natural Sciences on the board
(available in German, English).
Vorspann
12.09.2006
23:39 Uhr
Seite 274
Phywe Systeme GmbH & Co. KG

Robert-Bosch-Breite 10
D-37079 Gttingen
Germany
phone: ++49/551/604-0
fax: ++49/551/604-115
www.phywe.com
[email protected]
09.06.08
Order No. 16505.32 3 rd edition

LEP Web

Uploaded by

Copyright:

Available Formats

LEP Web

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LEP Web

Uploaded by

Copyright:

Available Formats

Vorspann

PHYWE Systeme GmbH & Co. KG

Natural sciences have a longstanding

The following research institutions and

We are in contact with these institutions and

A Center of Natural Sciences in Germany

Nobel Price winner

GTTINGEN is a city of teaching and research. Scientific equipment, teaching

Computer-Assisted Experiments with our

PHYWE Systeme GmbH & Co. KG D - 37070 Gttingen

Laboratory Experiments Physics 5

Laboratory Experiments, Physics

Laboratory Experiments Physics

6 Laboratory Experiments, Physics

PHYWE Systeme GmbH & Co. KG D - 37070 Gttingen

Laboratory Experiments, Physics

You can order the experiments as follows:

Didactically adapted descriptions of

Hall effect module,

Hall effect, p-Ge, carrier board

Coil, 600 turns

Iron core, U-shaped, laminated

Pole pieces, plane

Hall probe, tangent., prot. cap

Power supply 0-12 V DC/6 V, 12 V AC

Tripod base -PASS-

Support rod -PASS-, square, l = 250 mm

Right angle clamp -PASS-

Connecting cord, l = 100 mm, red

Connecting cord, l = 100 mm, blue

Connecting cord, l = 500 mm, red

Connecting cord, l = 500 mm, blue

Connecting cord, l = 500 mm, black

Cobra3 Basic Unit

Tesla measuring module

Cobra3 Software Hall

RS 232 data cable

PC, Windows 95 or higher

Please specify this

Complete Equipment Set, Manual on CD-ROM included

Complete equipment offering

Excellent measurement accuracy

Developed and proven by

PHYWE Systeme GmbH & Co. KG D - 37070 Gttingen

Laboratory Experiments Physics 7

Viscosity measurements with the falling ball viscometer

Surface tension by the ring method (Du Nouy method)

Surface tension by the pull-out method with Cobra3

Barometric height formula

Lift and drag (resistance to flow)

Measurement of basic constants: length, weight and time

Mechanical Vibration Acoustics

Velocity of sound in air with Cobra3

1.5.04-01/11 Acoustic Doppler effect

1.5.06-01/15 Velocity of sound using Kundts tube

Hookes law with Cobra3

1.3.03-01/05 Newtons second law / Air track or Demonstration track

Free fall with Cobra3

Determination of the gravitational constant