User Guide

Datgel

Fence and Map Tool gINT Reports

DFMT-UG-001 - 2.07
February 2013

Disclaimer
The information in this publication is subject to change without notice and does not represent a commitment
on the part of Datgel Pty Ltd. The software described in this document is furnished under a license agreement
or nondisclosure agreement. The software must be used or copied only in accordance with the terms of the
agreement.
Every effort was made to ensure accuracy of this information. However, Datgel Pty Ltd makes no warranty as
to the correctness of this information or the supplied files.
Printed in Australia. All rights reserved worldwide. No part of this publication may be reproduced in any form
or by any means without the prior written consent of Datgel Pty Ltd. Comments are welcome and become the
property of Datgel Pty Ltd.
All products mentioned are trademarks of the respective producers.
Copyright Datgel Pty Ltd 2013
Datgel Pty Ltd
Suite 8, Level 1, The Hub
89 - 97 Jones Street
Ultimo NSW 2007
Australia
Tel:
Fax:

+61 2 8202 8600

+61 2 8202 8606

Email:
Website:

[email protected]
www.datgel.com

Contents
About the Product ................................................................................................................ ii
Support ........................................................................................................................................... ii
System Requirements ..................................................................................................................... ii
gINT .............................................................................................................................................................. ii
Hardware and Operating System .................................................................................................................. ii

Conventions and typography used in this guide ............................................................................. ii

Field Colours .................................................................................................................................. iii

Installation ................................................................................................................... 1
1.1
1.2
1.3
1.4
1.5

Fences ........................................................................................................................ 4
2.1
2.2

Output ...................................................................................................................................4
User Report Variables ...........................................................................................................4

Site Map Reports ...................................................................................................... 10

3.1
3.2
3.3

Installation Overview .............................................................................................................1

Package Contents .................................................................................................................1
Before Installation..................................................................................................................1
Choose and Implement a Project Database Structure ..........................................................1
Merge gINT Library Objects ..................................................................................................1

Input ....................................................................................................................................10
Output .................................................................................................................................10
User Report Variables .........................................................................................................11

Reports ..................................................................................................................... 13
4.1
4.2

Fence Reports .....................................................................................................................13

Site Map Reports.................................................................................................................13

Figures
Figure 1 Current gINT Library File Location.......................................................................................... 2
Figure 2 Library Merge/Copy ................................................................................................................ 2
Figure 3 Merge gINT Library Objects ................................................................................................... 3
Figure 4 Example Fence Report ........................................................................................................... 4
Figure 5 Fence Report User Report Variables...................................................................................... 8
Figure 6 Fence Post Legend Showing All Options ............................................................................... 9
Figure 7 DG_COM_HOLE_TYPE Library Table ................................................................................. 10
Figure 8 Site Map Report Data Marker Properties .............................................................................. 11
Figure 9 Site Map Report User Report Variables ............................................................................... 12

Tables
Table 1 Field Colours ........................................................................................................................... iii
Table 2 Fence User Report Variables .................................................................................................. 4
Table 3 Site Map User Report Variables ............................................................................................ 11
Table 4 Fence Reports ....................................................................................................................... 13
Table 5 Site Map Reports ................................................................................................................... 13

Fence and Map Tool gINT Reports

User Guide

Datgel
DFMT-UG-001 - 2.07- February 2013

About the Product

The Datgel Fence and Map Tool gINT Reports is a collection of gINT reports and library objects which
provide an extensive range of data presentation options, along with dynamically generated scales bars
and legends/keys. The Tool is based on two databases structures: DGD and AGS RTA.
There are 5 major components of the Tool:
1.

Fence reports, with numerous output time user defined data presentation options

2.

Dynamic fence post legend

3.

Map reports

4.

Dynamic map key

5.

Dynamic scale bars for both fence and map reports

You need to complete the installation procedure (see Installation on page 1 before you can use the
Fence and Map Tool.

Support
12 months support and maintenance is included with the license purchase. For technical support
please email [email protected] or call +61 2 8202 8600.

System Requirements
gINT
The product requires gINT 8.2.004 or higher to run. The tool comprises of Fence and Site Map reports
that require gINT Professional.

Hardware and Operating System

Same system requirements as gINT 8.2, see: http://www.gintsoftware.com/products_requirements.html.

Conventions and typography used in this guide

Note: Tips and additional Information to help you.
>

Used to indicate a series of menu commands.

e.g. Select File > Open.

Used to indicate a gINT Application Group, Application, Table Group or Table , e.g.
DATA DESIGN | Project Database

Bold Text

Items you must select, command buttons, or items in a list.

e.g. Navigate to UTILITIES | Convert Projects (4th tab).

Italics Emphasis

Use to emphasize the importance of a point such as parameters.

e.g. Data Entry Check Omit Must Save prompt when save is required

CAPITALS

Names of keys on the keyboard. for example, SHIFT, CTRL, or ALT.

KEY+KEY

Key combinations, for example CTRL+P, or ALT+F4.

Fence and Map Tool gINT Reports

User Guide

ii

Datgel
DFMT-UG-001 - 2.07- February 2013

Indicates a code snippet within a paragraph

Code Snippet
Code sample

Indicates a sample program codes inserted in user guide e.g.

public override string ToString ()

File name or path

Used for formatting file name and paths e.g. di_lib.glb or

V:\10 gINT\Datgel Install Files\

Table_Name

Database table name, e.g. POINT_TABLE.

Field_Name

Database field name; e.g. PointID

Command line

Command line, presented exactly as it must be entered e.g.

cdir

Field Colours
Each of the fields in the project tables have been coloured to improve the data entry process as
indicated below in Table 1.
Table 1 Field Colours
Field Colour

Field Name and Explanation

Yellow

gINT Key Field mandatory data entry

Pastel Purple

AGS Data data associated with the AGS Data

Interchange Format

Pastel Green

Calculated Field data is written to this field by Datgels

code

Pastel Beige

Data Entry Field data should be entered into this field,

or data in this field influences the calculation

Pastel Red

Legacy Data Field historic data entered here, is

typically from an old database

Pastel Blue

Output Option used to control how data displays on a

report

Pastel Orange

Remark or Metadata Field additional data associated

with the primary information

Grey

Read-only

Fence and Map Tool gINT Reports

User Guide

iii

Datgel
DFMT-UG-001 - 2.07- February 2013

Installation

1.1

Installation Overview

There are two parts to the installation process:

Choose database type

Merge gINT library objects

1.2

Package Contents

Your software purchase may have come with the following contents:

1.3

Application CD which normally has the following folders:

\gINT Files
\Documentation

Before Installation

A few basic preparations can help ensure an effortless installation.

Make sure that the computer where you plan to install the program meets the minimum
hardware and software requirements.

Note: If youre in one of the following situations, then your gINT files have been set up already and you may
proceed to Section 2.
In the trial version of the Fence and Map Tool, the library will be locked and you cannot merge any gINT
Library Objects into your Library file, or make changes to this Library file. In this case, you have to use the
locked library as-is.
Steps1.4 and 1.5 have already been completed by Datgels developers, yourself or a colleague.
If you dont have existing gINT files then you may wish to just use the example Fence and Map Tool gINT
Files provided on the DVD.

1.4

Choose and Implement a Project Database Structure

If you are already using a DGD or an AGS RTA type database then you do not need to modify your
project database structure, and should use the library corresponding to your current database structure.
If you are not already using a DGD or an AGS RTA type database and associated library then you will
have been supplied a standardised version of one of them when you purchased the Datgel Fence and
Map Tool. It is advised that you use the supplied standard database structure to create your future
project files, if you do not then the Datgel Fence and Map Tool will not work correctly.

1.5

Merge gINT Library Objects

If you have purchased the Fence and Map Tool gINT Reports, then you have full access to the library
objects, and you may proceed with the following steps to merge the gINT Library components into your
Library file.
1.

Make a backup copy of your existing library file. By default this is located at:
C:\Users\Public\Documents\Bentley\gINT\libraries\

Fence and Map Tool gINT Reports

User Guide

Datgel
DFMT-UG-001 - 2.07- February 2013

IMPORTANT: If you are not already using a DGD or an AGS RTA type database and associated
library then you will have been supplied a standardised version of one of them when you purchased
the Datgel Fence and Map Tool.
When you proceed to step 2 you must select the standardised DGD or AGS RTA type database
and associated library. If you do not, the Datgel Fence and Map tool will not work correctly.

2.

Start gINT and open the library and project file you wish to use with Datgel Fence and Map
Tool gINT Reports.
The opened project and library files are displayed at the top of the gINT Window.

Figure 1 Current gINT Library File Location

3.

Select UTILITIES | Lib Merge/Copy

Figure 2 Library Merge/Copy

4.

Check the bullet that reads Merge From.

5.

In the Source Library File pane, browse the installation CD for file
Datgel Fence and Map Tool lib #.##.glb where #.## is the version number.

6.

Check the bullet that reads Select All.

7.

Check the bullet that reads Query On Overwrite.

Fence and Map Tool gINT Reports

User Guide

Datgel
DFMT-UG-001 - 2.07- February 2013

8.

Click
button to move all tables from the Available Source Tables pane on the left to the
Tables to Merge/Copy pane on the right side.

Figure 3 Merge gINT Library Objects

9.

Click Execute. This process may take several minutes to complete.

Take care to read the overwrite dialog and click Yes if you wish to overwrite the file, ELSE click
No.

This will merge in the reports, lookup lists, and other library objects which are related to the
Tool.
10. Click OK to finish the merge.

Fence and Map Tool gINT Reports

User Guide

Datgel
DFMT-UG-001 - 2.07- February 2013

Fences

2.1

Output

Fence Reports for range of page sizes and orientations have been set up, and they all operate the
same way.

Figure 4 Example Fence Report

2.2

User Report Variables

The user report variables can be used to define the details of the title block, the properties of the site
map and how the entities are displayed on the Fence Report. A list of the user report variables and an
explanation of how they are used is provided below in Table 2.
Table 2 Fence User Report Variables
Name

Value

Notes

Title

Subsurface Section

Report title

Drawn

Enter persons initials/name

Date Drawn

Enter date

Checked

Enter persons initials/name

Date Checked

Enter date

Figure Number

Enter text. If left blank, it will default to Figure 1.

Fence and Map Tool gINT Reports

User Guide

Datgel
DFMT-UG-001 - 2.07- February 2013

Name

Value

Notes

Map Orientation

B, N

Sets the orientation of the site map. B = Baseline

end points (default), N = North up

Override Sitemap Scale

1 (for 1:1000)

Overrides the scale of the site map by the selected

value. By default the site map scale is the same as
the fence x axis

Sitemap Lower Left Corner East

Overrides the coordinates of the lower left hand

corner of the site map to the specified coordinates.

Sitemap Lower Left Corner North

Sitemap Angle Relative North
CCW

Rotates the site map counter-clockwise through the

specified angle. If the coordinates of the lower left
corner are specified, the rotation is centred on the
lower left corner, otherwise it is centred on the
centre of the site map entities

Stick

Stick CPT

Stick DCP

Scope Geology Unit Legend

Project, Current Fence

Defines the scope of the geology unit legend

Coloured Graphic Log

Black, General Symbol,

Origin

Sets the graphic log colour source, leave blank for

default colour.
Black: Override all colours to Black
General Symbol: General Symbols will be used
instead of the default Material Symbols
Origin: Material Symbols set to origin colour

Depth Scale

L# / R#

EOH Text

Prints hole depth at bottom of fence post

Material Name

L# / R#

Graphic Name

L# / R#

L entered in these fields will print the info on the left

side of the fence posts and R will print the info on
the right side; if data exists for that hole.

Origin Text

L# / R# (AGS RTA only)

Formation Text

L# / R# (DGD only)

Project Unit Text

L# / R#

USCS Text

L# / R#

qc Max Scale

5, 10, 20, 40

qc Rf Plot

t, c

VS Text

L# / R#

SPT N Text

L# / R#

SPT N Plot

L# / R#

Fence and Map Tool gINT Reports

User Guide

L = Legend/material graphic (default)

S = Stick/line
GM = Geology Map Code colour
G1 = Geology Project Unit colour
G2 = Geology Project Unit 2 colour
GD = Geology Project Unit 1 and Geology Project
Unit 2
OR = Origin colour
C = CPT Soil Behaviour Type Colour (only if youre
licensed for the CPT Tool)
GU1 = Geology Project Unit 1 colour
GU2 = Geology Project Unit 2 colour
GU3 = Geology Project Unit 3 colour
GUD = Geology Project Unit 1 and Geology Project
Unit 2 colour
Combinations such as L G2 will show both
graphics

Enter a number after L or R to offset the entity in

that direction by that number. For example, L10 will
print the entity on the left side offset by 10 mm.
The Type of Core Column field determines which
core photo column type to print on the fence posts.
The available options are:
VSC (Visual Sketch Column)
CPC (Core Photo Column)

Datgel
DFMT-UG-001 - 2.07- February 2013

Name

Value

Notes

SPT N and RQD Plot

L# / R#

Pocket Penetrometer Text

L# / R#

DIC (Downhole Image Column)

VSC & CPC (Visual Sketch Column and Core
Photo Column.

Sample Interval

L# / R#

Sample Text

L# / R#

DCP Plot

L# / R#

Consistency Text

L# / R#

Rock Strength Text

L# / R#

Rock Strength Histogram Plot

L# / R#

Rock Strength Bar Plot

L# / R#

Display Point Load Test

Fracture Spacing Histogram

(Average Defect Spacing)

L# / R#

Fracture Spacing Bar Chart

L# / R#

Fracture Frequency Plot

L# / R#

Weathering Text

L# / R#

Weathering Histogram

L# / R#

Weathering Bar Chart

L# / R#

RQD Plot

L# / R#

RQD Text

L# / R#

Core Image Column Type

VSC, CPC, DIC, VSC &

CPC

Core Image Column Position

L# / R#

Drilling Water Levels

L# / R#

Piezo Levels

L# / R#

Backfill

L# / R#

Well Area Width (mm)

In-situ Perm Text

L# / R#

In-situ Perm K Plot

L# / R#

In-situ Perm Lugeon Plot

L# / R#

In-situ Density

L# / R#

ASS Display Liming Rate Net

ASS Scr

ASS SPOS

ASS Net Acidity

ASS Potential

ASS Criteria

Q,T

Entering Q will post the QASSIT Criteria data on

the fence posts, and entering T will post the ASS
Types on the fence posts.

ASS Left Offset

ASS Right Offset

Distance in mm the ASS entities on the left / right

side of the post will offset, default is 0.

Lab USCS Text

L# / R#

PSD Percent Fines Text

L# / R#

Fence and Map Tool gINT Reports

User Guide

The Core Image Column field determines whether

to print the core photo column on the left or right
side of the fence posts. This field must be assigned
a value when the type of Core Column field is
assigned.

The Backfill field will print the piezometer column if

data is found in the Piezometer table. Otherwise, it
will print the well column from the Backfill/Well
table.
Well Area Width defines the width of the backfill
column

Note: Scr cannot be shown with SPOS. If both Scr

and SOS are checked, then Scr will be shown.

Datgel
DFMT-UG-001 - 2.07- February 2013

Name

Value

PSD D50 Text

L# / R#

PSD DMF Text

L# / R#

Lab CBR Text

L# / R#

RMR Histogram

L# / R#

UCS Text

L# / R#

Geotech Chem Plot Left Code

Lookup

Geotech Chem Plot Left Test Type

Lookup

Geotech Chem Plot Left Code Unit

Lookup

Geotech Chem Plot Left Minimum

Geotech Chem Plot Left Maximum

Geotech Chem Plot Right Code

Lookup

Geotech Chem Plot Right Test

Type

Lookup

Geotech Chem Plot Right Code

Unit

Lookup

Geotech Chem Plot Right

Minimum

Geotech Chem Plot Right

Maximum

Rock Tensile Strength Text

L# / R#

Point Load Index Text

L# / R#

Ten Percent Fines Text

L# / R#

Emerson Class Text

L# / R#

Moisture Content Text

L# / R#

Dry Density Text

L# / R#

Shrink-Swell Index Text

L# / R#

Plasticity Index Text

L# / R#

Fence and Map Tool gINT Reports

User Guide

Notes

Datgel
DFMT-UG-001 - 2.07- February 2013

Figure 5 Fence Report User Report Variables

Fence and Map Tool gINT Reports

User Guide

Datgel
DFMT-UG-001 - 2.07- February 2013

Figure 6 Fence Post Legend Showing All Options

Fence and Map Tool gINT Reports
User Guide

Datgel
DFMT-UG-001 - 2.07- February 2013

Site Map Reports

3.1

Input

If your project has a high density of PointIDs, then you may have a problem with PointID labels
overplaying on Site Map reports. By default the PointID label will display at 12 oclock, i.e. above the
data marker. You may manually override the PointID label position by setting the analogue clock
position in the project field POINT.Map_Post_Position.
For example:

3.2

6 represent 6 oclock and displays below the data marker

10:30 represents the time of 10:30 and displays to the top left the data marker

Output

Site maps of a range of page sizes and orientations have been set up, and they all operate the same
way.
Data markers have been defined for each Hole Type in the DG_COM_HOLE_TYPE library table. gINT
creates the map key based on the hole types in the given project and the info in the
DG_COM_HOLE_TYPE library table.

Figure 7 DG_COM_HOLE_TYPE Library Table

Fence and Map Tool gINT Reports

User Guide

10

Datgel
DFMT-UG-001 - 2.07- February 2013

Sometimes you may need to change the way the data marker is displayed. You can do this, as a one
off, in the OUTPUT Application group by:
1.

Select the Properties button

to bring up the Site Map Report Properties

2.

Select the Data Representation Tab

3.

Here you can edit data marker, height, colour, turn on and off the ID plotting and if the IDs are
opaque (halo that prints around text)

Figure 8 Site Map Report Data Marker Properties

3.3

User Report Variables

The user report variables can be used to define the details of the title block and the properties of the
site map report. A list of the user report variables and an explanation of how they are used is provided
below in Table 3.
Table 3 Site Map User Report Variables
Name

Value

Notes

Title

Site Map

Report title

Drawn

Enter persons initials/name

Date Drawn

Enter date

Checked

Enter persons initials/name

Date Checked

Enter date

Figure Number

Enter text. If left blank, it will default to Figure 1.

Scale

1 (for 1:1000)

Overrides the scale of the site map by the selected

value.

Min E (m)
Fence and Map Tool gINT Reports
User Guide

Overrides the coordinates of the lower left hand

11

Datgel
DFMT-UG-001 - 2.07- February 2013

corner of the site map to the specified coordinates.

Min N (m)
Destination or Source

Defines if the Destination E/N (primary East and

North fields) or Source N/E will be used by the map.
Only applies to DGD databases.

Figure 9 Site Map Report User Report Variables

Fence and Map Tool gINT Reports

User Guide

12

Datgel
DFMT-UG-001 - 2.07- February 2013

Reports

4.1

Fence Reports

Table 4 Fence Reports

Name

Description

FENCE A1L

Fence A1 paper size Landscape orientation with a site map

FENCE A1L NO PLAN

Fence A1 paper size Landscape orientation without a site map

FENCE A1LE

Fence A1 paper size width Landscape orientation with a site map (extended length for a
roll printer)

FENCE A1LE NO PLAN

Fence A1 paper size width Landscape orientation without a site map (extended length
for a roll printer)

FENCE A3L

Fence A3 paper size Landscape orientation with a site map

FENCE A3L NO PLAN

Fence A3 paper size Landscape orientation without a site map

FENCE A3LE

Fence A3 paper size width Landscape orientation with a site map (extended length for a
roll printer)

FENCE A3LE NO PLAN

Fence A3 paper size width Landscape orientation without a site map (extended length
for a roll printer)

FENCE A4L

Fence A4 paper size Landscape orientation with a site map

FENCE A4L NO PLAN

Fence A4 paper size Landscape orientation without a site map

FENCE A4P

Fence A4 paper size Portrait orientation with a site map

FENCE A4P NO PLAN

Fence A4 paper size Portrait orientation without a site map

4.2

Site Map Reports

Table 5 Site Map Reports

Name

Description

MAP A1L

Site Map A1 paper size Landscape orientation

MAP A1P

Site Map A1 paper size Portrait orientation

MAP A3L

Site Map A3 paper size Landscape orientation

MAP A3P

Site Ma p A3 paper size Portrait orientation

MAP A4L

Site Map A4 paper size Landscape orientation

MAP A4P

Site Map A4 paper size Portrait orientation

Fence and Map Tool gINT Reports

User Guide

13

Datgel
DFMT-UG-001 - 2.07- February 2013