Scribd
Upload
306 views

Theory: Figure 1: The Exit Age Distribution Curve E For Fluid Flowing Through A Vessel Also Called The Residence Time

1) The residence time distribution (RTD) curve describes the distribution of times that fluid elements spend traveling through a continuous stirred-tank reactor (CSTR). 2) There are two main experimental methods to determine the RTD curve: the pulse experiment, which involves injecting a tracer and measuring its concentration over time in the outlet stream, and the step experiment, which involves switching the inlet stream to one with a tracer and measuring its concentration at the outlet. 3) The pulse experiment tracer concentration curve can be converted to the RTD curve by normalizing the area under the curve to 1. The step experiment outlet tracer concentration curve can similarly be converted to a dimensionless F curve for analysis.

Uploaded by

iko856
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
306 views

Theory: Figure 1: The Exit Age Distribution Curve E For Fluid Flowing Through A Vessel Also Called The Residence Time

1) The residence time distribution (RTD) curve describes the distribution of times that fluid elements spend traveling through a continuous stirred-tank reactor (CSTR). 2) There are two main experimental methods to determine the RTD curve: the pulse experiment, which involves injecting a tracer and measuring its concentration over time in the outlet stream, and the step experiment, which involves switching the inlet stream to one with a tracer and measuring its concentration at the outlet. 3) The pulse experiment tracer concentration curve can be converted to the RTD curve by normalizing the area under the curve to 1. The step experiment outlet tracer concentration curve can similarly be converted to a dimensionless F curve for analysis.

Uploaded by

iko856
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Theory

It is evident that elements of fluid taking different routes through the CSTR reactor may
take different lengths of time to pass through the vessel. The distribution of these times
for the stream of fluid leaving the vessel is called the exit age distribution E, or the
residence time distribution RTD of fluid. E has the units of time-l. We find it convenient
to represent the RTD in such a way that the area under the curve is unity, or

Edt =1
0

This procedure is called normalizing the distribution, and Figure 1 shows this.

Figure 1: The exit age distribution curve E for fluid flowing


through a vessel; also called the residence time

The fraction younger than age t, is


t1

Edt
0

Whereas the fraction of material older than t, shown as the shaded area in Figure 1.

t1

Edt =1 Edt
t1

The E curve is the distribution needed to account for non-ideal flow.


The simplest and most direct way of finding the E curve uses a physical or non-reactive
tracer. For special purposes, however, we may want to use a reactive tracer. This
chapter deals in detail with the nonreactive tracer, and for this all sorts of experiments
can be used. Because the pulse and the step experiments are easier to interpret, the
periodic and random harder, here we only consider the pulse and the step experiment.
The Pulse Experiment
Let us find the E curve for a vessel of volume V m3 through which flows v m 3/s of fluid.
For this instantaneously introduce M units of tracer (kg or moles) into the fluid entering
the vessel, and record the concentration-time of tracer leaving the vessel. This is the
Cpulse curve. From the material balance for the vessel we find

A= Cdt = C i t i=
i

M
v

A, Area under the Cpulse curve


M, units of tracer
v, volumetric flow rate of fluid.

tCdt
t =

Cdt

V
v

t, mean residence time


V, volume of the vessel
v, volumetric flow rate of fluid.

Figure 2: An Experimental Cpulse curve

To find the E curve from the C pulse curve simply change the concentration scale such
that the area under the curve is unity. Thus, simply divide the concentration readings by
M/v, as shown in Figure 3.
C
E= pulse
M /v

Figure 3: E curve from an experimental Cpulse

The Step Experiment


Consider u m3/s of fluid flowing through a vessel of volume V. Now at time t=0 switch
from ordinary fluid to fluid with tracer of concentration C max =[kg or mol/ m3], and
measure the outlet tracer concentration Cstep versus t, as shown in Figure 4.

Figure 4: Step tracer experiment curve versus


RTD

A material balance relates the different measured quantities of the output curve of a
step input.
m

Cmax =
v
where m [kg/s] is the flow rate of tracer in the entering fluid
Shaded area under curve in Figure 3 is equal to
Cmax t =

mV
v2

Where RTD is found to be as follows.


C max

td C step
t =

0
C max

d Cstep
0

1
=
Cmax

C max

d C step
0

The dimensionless form of the Cstep is called the F curve. It is found by having the tracer
concentration rise from zero to unity, as shown in Figure 5

Figure 5: Transforming an experimental Cstep curve to an F curve.

You might also like